AUDIO VIDEO SURROUND RECEIVER
-
VR 8050
INSTRUCTION MANUAL
KENWOOD CORPORATION
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this receiver has several
operation modes. These modes enable the remote control to control other audio/video components. In
order to effectively use the remote control it is important to read the operating instructions and obtain a
proper understanding of the remote control and how to switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation
modes may result in incorrect operations.
For the U.S.A.
Register Online
Register your Kenwood Home Audio
Plus opt in to receive e-mail updates and other offers
when you register at our web site.
B60-5458-00 00 MA (K, P)
0401
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying the power
Contents
Unpacking
Caution : Read the pages marked
safe operation.
carefully to ensure
Unpack the unit carefully and make sure that all accessories are present.
FM indoor antenna (1)
AM loop antenna (1)
Before applying the power...................................................... 2
Safety precautions..................................................................... 2
How to use this manual ............................................................ 2
Unpacking .................................................................................. 3
Preparing the remote control .................................................... 4
Special features ......................................................................... 5
Names and functions of parts ................................................. 6
Main Unit ................................................................................... 6
Remote control unit (1)
RC-R0822
Batteries (R6/AA) (2)
Remote control unit ........................................................................
7
Setting up the system........................................ 8
Connecting the terminals .................................. 9
Connecting audio components........................ 10
Connecting video components........................ 11
Digital connections .......................................... 12
Connecting video components
(COMPONENT VIDEO) .................................... 13
Connecting a DVD player (6-channel input)..... 14
Connecting the speakers ................................. 15
Connecting to the AV AUX jacks ..................... 16
Connecting the antennas................................. 16
Preparing for surround sound ....................... 17
Speaker settings .............................................. 17
If any accessories are missing, or if the unit is damaged or fails to operate,
notify your dealer immediately. If the unit was shipped to you directly,
notify your shipper immediately. Kenwood recommends that you retain
the original carton and packing materials in case you need to move or ship
the unit in the future.
Preparations
Keep this manual handy for future reference.
Normal playback.............................................. 20
Preparing for playback ..................................... 20
Listening to a source component .................... 20
Adjusting the sound ......................................... 21
Recording .......................................................... 23
Recording audio (analog sources) ................... 23
Recording video ............................................... 23
Recording audio (digital sources) .................... 23
Listening to radio broadcasts ....................... 24
Tuning radio stations ....................................... 24
Presetting radio stations manually .................. 24
Receiving preset stations ................................ 25
Receiving preset stations in order (P.CALL) ... 25
Ambience effects ............................................. 26
Surround modes .............................................. 26
Surround play ................................................... 28
DVD 6-channel playback .................................. 30
Convenient functions ....................................... 30
Operations
Basic remote control operations for other
components....................................................... 33
Registering setup codes for other
components ..................................................... 33
Searching for your codes ................................. 33
Checking the codes ......................................... 34
Re-assigning device keys ................................ 34
Operating other components .......................... 34
Setup code chart.............................................. 35
CASSETTE deck, CD player & MD recorder
operations ........................................................ 39
Other components’ operations ....................... 40
Remote Control
Additional
Information
In case of difficulty.......................................... 42
Specifications .................................................. 44
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying the power
Preparing the remote control
For the U.S.A.
FCC WARNING
Loading the batteries
This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in
the instruction manual. The user could lose the authority to
operate this equipment if an unauthorized change or modification
is made.
1 Remove the cover.
2 Insert the batteries.
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
may cause harmful interference to radio communications, if it is not
installed and used in accordance with the instructions. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– – Reorient or relocate the receiving antenna.
3 Close the cover.
• Insert two AA-size (R6) batteries as indicated by the polarity
markings.
– – Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
– – Consult the dealer or an experienced radio / TV technician for
help.
Operation
When the STANDBY indicator is lit, the power turns ON when you press
the POWER RCVR key on the remote control. When the power comes
ON, press the key you want to operate.
Operating range
(Approx.)
For the U.S.A.
Remote sensor
Note to CATV system installer
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as
close to the point of cable entry as practical.
6 m
POWER RCVR
®
As an ENERGY STAR Partner, Kenwood
Corporation has determined that this
Infrared ray system
®
product meets the ENERGY STAR
guidelines for energy efficiency. This
product can save energy. Saving energy
reduces air pollution and lowers utility bills.
• When pressing more than one remote control key successively, press the
keys securely by leaving an interval of 1 second or more between keys.
Notes
1. The supplied batteries may have shorter lives than ordinary batteries
due to use during operation checks.
2. When the remote-controllable distance gets shorter than before,
replace both batteries with new ones.
3. Placing the remote sensor in direct sunlight, or in direct light from a
high frequency fluorescent lamp may cause a malfunction.
In such a case, change the location of the system installation to
prevent malfunction.
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying the power
Special features
True home theater sound
This receiver incorporates a wide variety of surround modes to bring you
maximum enjoyment from your video software. Select a surround mode
according to your equipment or the software you are going to play and
Neo:6
Neo:6 is a new technology which was developed by DTS. It can
produce high grade 6 channels surround with an astonishing fidelity
from 2 channels content. Neo:6 has 2 mode, "CINEMA" mode is for
movie playback and "MUSIC" mode is for music playback.
enjoy!
§
Dolby Digital and Dolby Digital EX
DSP surround modes
The DOLBY DIGITAL mode lets you enjoy full digital surround from
software processed in the Dolby Digital format. Dolby Digital provides
up to 5.1 channels of independent digital audio for better sound
quality and more powerful presence than conventional Dolby Surround.
As for Dolby Digital EX, it creates six full-bandwidth output channels
from the 5.1 channel sources. This is done using a matrix decoder that
derives three surround channels from the two in the original recording.
For best results, Dolby Digital EX should be used with movie
soundtracks recorded with Dolby Digital Surround EX.
The DSP (Digital Signal Processor) used for this receiver incorporates
a variety of high quality adjustable sound fields, like “ARENA”, “JAZZ
CLUB”, “THEATER”, “STADIUM” and “DISCO”. It is compatible
with almost any kind of program source.
DVD 6-channel input
If you own a DVD player equipped with 6-channel output, this receiver
allows you to obtain the full surround sound impact of DVD source
material featuring multi-channel encoding. Since the source signals
are digital and each channel is input independently, the resulting
ambience is far superior to what can be achieved with conventional
surround sound systems.
Dolby PRO LOGIC IIx and Dolby PRO LOGIC II
DOLBY PRO LOGIC II, whilst totally compatible with its predecessor
PRO LOGIC, provides greater advantages in surround sound. It allows
user to enjoy the conventional stereo or Dolby Surround with a
convincing “5.1 like” presentation. PRO LOGIC II offers special
features for controlling the overall spatial, dimensionality and frontal
sound field imaging. PRO LOGIC II produces an impressive surround
ACTIVE EQ
ACTIVE EQ mode will produce a more dynamic sound quality in any
condition. You can enjoy a more impressive sound effect when
ACTIVE EQ is turned on.
sound from video software marked
and three-
dimensional space from music CD. When listening to music, you will
be able to enjoy the experience of sheer STEREO surround sound.
DOLBY PRO LOGIC IIx enhanced DOLBY PRO LOGIC II’s features.
It creates 6.1 channel and 7.1 channel surround sound from stereo or
5.1 channel signals. This feature provides you an astonishing ambience
effect which makes you feel you are surrounded by natural sound.
Especially 7.1 channel surround sound can produce real back sound
from Surround Back speakers.
SPEAKER EQ
SPEAKER EQ function is to adjust the receiver’s audio output
characteristics with the speakers’ characteristics which differs
depending on the size of the speakers. Especially for the music sound
source playback, the reproduced sound becomes more natural when
adjusting the output characteristics. When activating the SPEAKER
EQ function, you will be able to enjoy a more natural and dynamic
sound experience even with small size speakers.
DTS and DTS-ES
DTS (Digital Theater System) is a 5.1 channel digital audio format that
provides five full spectrum channels and one low-frequency
(subwoofer) channel for unprecedented clarity, optimum channel
separation and a (wide) dynamic range.
Universal IR (InfraRed) remote control
In addition to the basic receiver, the remote control supplied with this
receiver can also operate almost all of your remote controllable audio
and video components. Just follow the simple setup procedure to
register the components you have connected.
DTS-ES (Extended Surround) presents 6.1 channels surround system
with additional Surround Back channel which evolved from the
conventional 5.1 channels surround system. DTS-ES format that was
recorded in DVD, CD or LD comprises of two modes. DTS-ES Discrete
6.1 produce the discrete surround back which is completely
independent and DTS-ES Matrix 6.1 produces the surround back
which synthesised within the left and right surround channels using
matrix technology. DTS-ES has perfect compatibility with the
conventional 5.1 channels surround system. 6.1 channels surround
with an additional surround back presents a more natural presence
and surround effects by increasing the impression of the sound
image from back.
Important:
When a DTS disc is played on a CD, LD or DVD player, noise may be
output from the analog output. It is recommended that you connect
the digital output of the player to the digital input of this unit.
DTS 96/24
DTS 96/24 made it possible to achieve a wide frequency range of over
40 kHz by increasing the sampling frequency to 96 or 88.2 kHz.
Moreover, DTS 96/24’s ability of 24 bit resolution offers the same
frequency band and dynamic range as 96 kHz/24 bit PCM.
DTS 96/24 is, as with conventional DTS Surround, compatible with
multi-channels. Therefore, sources recorded using DTS 96/24
technologies can be played in high sampling frequency, multi-channel
audio with ordinary DVDs and CDs.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and functions of parts
Main unit
Speaker
MUTE
CLIP
Input mode
Listen mode
indicators
indicators indicator indicator indicators
DTS DOLBY DIGITAL STEREO NEO:6
MATRIX
DSP MODE DISCRETE PRO LOGIC LOUDNESS
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
AUTO indicator
A
B
CLIP
COAXIAL
ANALOG 96kHzfs
L
C
SW
R
MEMORY indicator
AUTO
MEMORY
STEREO
TUNED
LFE
STEREO indicator
TUNED indicator
SL
S
SB
SR
Frequency display
Input channel indicators
Output channel indicators
Input display
Preset channel display
Surround mode display
Display
VOLUME CONTROL
POWER
STANDBY
DSP
DOLBY DIGITAL
SPEAKER EQ DTS
ACTIVE EQ
LOUDNESS
ON/STANDBY
A
SPEAKERS
B
ACTIVE EQ
SPEAKER EQ LOUDNESS
DSP
STEREO INPUT MODE DIMMER
DOWN
MUTE
UP
DVD/6CH
CD/DVD
PHONO
TUNER
MULTI CONTROL
LISTEN MODE
SOUND
BAND
TONE
SETUP
AV AUX
PHONES
VIDEO
1
VIDEO
2
VIDEO
3
MD/TAPE
S VIDEO
VIDEO
L-AUDIO-R
AUTO MEMORY
6 LOUDNESS key
Use to switch the status of LOUDNESS.
7 DSP key
¡
& AUTO key
Use to select the auto or manual tuning
mode.
* TONE key
Use to switch the status of TONE control.
( MEMORY key
Use to store radio stations in the preset
memory.
¢
1 POWER ON/STANDBY key
Use to turn the power ON/STANDBY.
STANDBY indicator
2 A SPEAKERS B keys
Use to turn the A/B speakers on or off.
3 ACTIVE EQ key
Use to select ACTIVE EQ’s setting.
4 SPEAKER EQ key
Use to select SPEAKER EQ’s setting.
5 Surround LED (lighting-emitting diode)
indicators
DSP mode LED indicator
Lights when the receiver is in the DSP mode.
SPEAKER EQ mode LED indicator
Lights when the receiver is in the SPEAKER
EQ mode.
ACTIVE EQ mode LED indicator
Lights when the receiver is in the ACTIVE EQ
mode.
DOLBY DIGITAL mode LED indicator
ª
Lights when the receiver is in the Dolby
Digital mode.
DTS mode LED indicator
Lights when the receiver is in the DTS mode.
&
)
•
Use to select any of the DSP mode.
8 STEREO key
¡
º
Use to switch the listen mode to STEREO.
¢
¡
9 INPUT MODE key
8
Use to switch between the full auto, digital
and analog inputs.
0 DIMMER key
¡
) SETUP key
&
Use to select the speakers' settings etc.
Use to select the REC MODE.
£
¡
keys
&
Use to adjust the brightness of the display.
º
Use for selection adjustments during sound,
set up and preset channel functions.
™ MULTI CONTROL knob
Use to control a variety of settings.
£ LISTEN MODE knob
Use to select the listening mode.
¢ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)
jacks
∞ AV AUX key
ª
! VOLUME CONTROL knob
@ MUTE key
)
¡
&
•
™
Use to temporarily mute the sound.
# PHONES jack
™
™
Use for headphone listening.
$ Input Selector keys
)
^
^
(DVD/6CH, CD/DVD, PHONO, TUNER,
VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE)
Use to select input sources.
Use to switch the input to AV AUX.
% SOUND key
º
Use to adjust the sound quality and the
ª
ambience effects.
^ BAND key
¢
LOUDNESS LED indicator
Lights when the LOUDNESS is ON.
¡
Use to select the broadcast band.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the
condition, the system can be turned ON by remote control unit.
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and functions of parts
Remote control unit
This remote control unit can be use not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturer’s
setup codes.
fi
*
DVD
6CH
TUNER
VID3
CD
DVD
VID1
1
AV AUX
MD
TAPE
VID2
(
PHONO
TV
POWER
RCVR
)
¡
P
ow
o
P
w
C
e
r
V
T
R
e
S
2
3
4
5
3
6
Multi
Enter
2
7
™
£
Multi
1
8
0
9
+
10
+ 100
TV Mute
¢
4
5
6
Page
Return
Exit
OSD
LAST/A/B
Guide
Disc Skip
Menu
∞
Disc Sel.
Mute
Input Sel.
§
¶
¢
Tone
+
CH
+
VOL
7
8
9
Sound
•
ª
4
–
–
Bass
Boost
TV
VOL
TV Input
Band
–
Tune
+
–
Tune
+
0
!
@
º
⁄
¤
‹
Dimmer
Auto
Top Menu
Setup
Info/Flip
Input
Mode
Loudness
#
$
If the name of a function is different on
Active
EQ
Remote
Setup
the receiver and on the remote control,
the name of the remote control key in
this manual is indicated in parentheses.
Listen Mode
DSP
Mode
Speaker
EQ
Stereo
%
^
&
›
fi
1 Source keys (MD/TAPE, CD/DVD, DVD/6CH,
TUNER, VID1, VID2, VID3, AV AUX, PHONO)
When press and hold for more than 3 seconds,
they are used to select the registered compo-
9 TV VOL +/– keys
Use to temporarily mute the TV sound.
£ Page 5/∞key
Use to adjust the TV’s volume.
0 1/¡keys
Use to operate other components.
¢ OSD (on screen display) key
Use to operate the DVD component.
Guide key
If CD, MD or Tape is selected as the input
source, this key functions as search keys.
nents.
‹
Input Selector keys (MD/TAPE, CD/DVD, DVD/
6CH, TUNER, VID1, VID2, VID3, AV AUX, PHONO)
When press and release in less than 3 seconds,
Tune –/+ keys
Use to operate the tuner mode.
¢
Use to operate other components.
∞ Menu key
! 8key
they are used to select the input sources.
2 SRC ( ) Power key
)
Use to operate other components.
Use to operate other components.
§ Mute key
source
Use to turn the other source components on or off.
3 Numeric keys
Dimmer key
º
¡
Use to adjust the brightness of the display.
Use to temporarily mute the sound.
¶ Tone key
∞
@ 3/8key
¡
Provide functions identical to those of the
original remote control supplied with the
component you are controlling.
If CD is selected as the input source, this key
functions as the play/pause key.
Use to switch the status of TONE control.
Sound key
º
If MD or TAPE key is selected as input source,
this key functions as the play key.
Band key
Use to select the broadcast band.
Use to adjust the sound quality and the
ambience effects.
Multi (multi control) %/fi keys
Use to control a variety of settings.
Use to operate other components.
P.Call @/# keys
&
¢
• VOL +/– keys
)
Use to adjust the receiver’s volume.
ª Bass Boost key
∞
# 2 key
¡
Use for selection adjustments during sound,
set up and preset channel functions.
Enter key
If Tape is selected, this key functions as
reverse play key.
Use to select the maximum adjustment
setting for the low frequency range.
Info/Flip key
º ÷ key
Use to operate other components.
4 Return key
Use to operate the DVD component.
Exit key
Use to operate other components.
5 Disc Skip key
If CD is selected as the input source, this key
functions as the multi-CD player disc skip key.
LAST/A/B key
If TAPE is selected as the input source, this is
A and B deck of a double cassette deck.
Use to operate other components.
6 Disc Sel. key
Use to operate other components.
Input Sel. key
Use to operate other components.
If VCR is selected, this key functions as
record key when it pressed twice sequen-
tially.
$ Input Mode key
8
Use to switch between the full auto, digital
and analog inputs.
% Listen Mode 5/∞keys
Use to select the listening mode.
^ DSP Mode key
Use to select any of the DSP mode.
& Active EQ key
Use to select ACTIVE EQ’s setting.
When in MD or Tape is selected, this key
functions as record key.
Top Menu key
•
•
¡
Use to operate the DVD component.
Setup key
&
Use to select the speakers’ settings etc.
⁄ Loudness key
¡
* LED (lighting-emitting diode) indicator
Blinks to show that signals are being transmit-
ted.
Use to switch the status of LOUDNESS.
¤ Remote Setup key
‹
Use to register other components.
‹ 7 key
( TV key
Use to select the TV equipment.
If CD, MD, or TAPE is selected as the input
source, this key functions as the stop key.
Use to operate other components.
7 CH +/– keys
) POWER RCVR (
) key
&
receiver
Use to turn the receiver on or off.
¡ TV Power key
Auto key
¢
Use to select the channels.
¢ / 4keys
Use to select the auto or manual tuning
mode.
Use to turn the TV on or off.
™ +100 key
Use to select the disc number with the multi-
CD player.
TV mute key
If CD, MD and DVD is selected as the input
source, these keys function as skip keys.
8 TV Input key
› Speaker EQ key
¡
Use to select SPEAKER EQ’s setting.
fi Stereo key
º
Use when in TV operation.
Use to switch the listen mode to STEREO.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Make connections as shown in the following pages.
When connecting the related system components, be sure
to refer to the instruction manuals supplied with the
components you are connecting.
Input mode settings
CD/DVD, VIDEO 2, VIDEO 3 and DVD/6CH inputs each include jacks
for digital audio input and analog audio input.
The initial factory settings for audio signal playback for CD/DVD,
DVD/6CH, VIDEO 2 and VIDEO 3 are full auto.
After completing connections and turning on the receiver, follow the
steps below.
Do not connect the power cord to a wall outlet until all
connections are completed.
Notes
1. Be sure to insert all connection cords securely. If their connections are
imperfect, sound may not be produced or there will be noise inference.
2. Be sure to remove the power cord from the AC outlet before plugging
or unplugging any connection cords. Plugging/unplugging connection
cords without disconnecting the power cord can cause malfunctions
and may damage the unit.
INPUT MODE
3. Do not connect power cords from components whose power
consumption is larger than what is indicated on the AC outlet at the
rear of this unit.
Input Selector
LISTEN MODE
Analog connections
Audio connections are made using RCA pin cords. These cables transfer
stereo audio signal in an “analog” form. This means the audio signal
corresponds to the actual audio of two channels. These cables usually
have 2 plugs on each end, one red for the right channel and one white for
the left channel. These cables are usually packed together with the
source unit, or are available at your local electronics retailer.
1 Use the Input Selector keys to select CD/DVD, VIDEO 2, VIDEO 3
or DVD/6CH.
2 Press the INPUT MODE key.
Each press switches the setting as follows:
Microcomputer malfunction
In DTS play mode
1 FULL AUTO (digital input, analog input)
2 DIGITAL MANUAL (digital input)
If operation is not possible or an erroneous display appears, even
though all connections have been made properly, reset the
microcomputer referring to “In case of difficulty”.
w
In CD/DVD, VIDEO 2, VIDEO 3 or DVD/6CH play mode
1 FULL AUTO (digital input, analog input)
2 DIGITAL MANUAL (digital input)
3 6CH INPUT (DVD/6CH input)
4 ANALOG (analog input)
Digital input:
Select this setting to play digital signals from a DVD, CD, or LD
player.
Analog input:
Select this setting to play analog signals from a cassette deck, VCR,
or record player.
Auto detect:
In “FULL AUTO” mode (AUTO DETECT indicator light up), the
receiver detects the digital or analog input signals automatically.
Priority is given to digital signal during input mode selection. The
receiver will select the input mode and listening mode automatically
during playback to match the type of input signal (Dolby Digital,
PCM, DTS) and the speaker setting. The OPTICAL and COAXIAL
indicator on the display will light up when digital signal is detected.
If the input signal is analog, the ANALOG indicator will light up.
To keep the receiver set to the currently selected listening mode,
use the INPUT MODE key to select “DIGITAL MANUAL” (manual
sound). However, even when this setting is selected, there may be
cases in which the listening mode is selected automatically to
match a Dolby Digital source signal depending on the combination
of listening mode and source signal.
At DIGITAL MANUAL, if the audio reproduction stops in the middle
due to change in the input signals, etc. press the LISTEN MODE
Knob.
If the INPUT MODE key is pressed quickly, sound may not be
produced. Press the INPUT MODE key again.
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the terminals
1 Strip coating.
2 Loosen.
Speaker placement
Center Speaker
3 Insert.
4 Secure.
Subwoofer
Front Speakers
(L, R)
Listening
position
Surround Speakers
(L, R)
*Surround Back
Left Speaker
*Surround Back
Right Speaker
1 Strip coating.
2 Push the lever.
*Surround Back Speaker
*For Surround Back speaker, you may place either two Surround Back
speakers (Surround Back Left Speaker and Surround Back Right
Speaker) for 7.1 channel surround sound system or one Surround
Back Speaker for 6.1 channel surround sound system.
Front (Left and Right) Speakers
3 Insert the cord.
4 Return the lever.
Place at the front left and right of the listening position. Front
Speakers are required for all surround modes.
Center Speaker
Place front and center. This speaker stabilizes the sound image and
helps recreate sound motion. Required for surround playback.
Surround (Left and Right) Speakers
Place at the direct left and right, or slightly behind, the listening
position at even heights, approximately 1 meter above the ears of the
listeners. These speakers recreate sound motion and atmosphere.
Required for surround playback.
Connection of banana plugs
1 Secure.
2 Insert.
Subwoofer
Reproduces powerful deep bass sounds.
Surround Back Speaker/s
Place the speaker/s directly at the rear of the listening position. The
optimum position depends mainly on the room condition.
• Although the ideal surround system consists of all the speakers
listed above, if you don't have a Center speaker or a Subwoofer, you
can divide those signals between the available speakers in the
speaker settings steps to obtain the best possible surround
• Sound will not be heard if the speaker terminal is not fully secured.
reproduction from the speakers you have available.
&
• Never short circuit the + and – speaker cords.
• If the left and right speakers are connected inversely or the speaker
cords are connected with reversed polarity, the sound will be unnatu-
ral with ambiguous acoustic imaging. Be sure to connect the speakers
correctly.
Speaker impedance
After confirming the speaker impedance indications printed on the
rear panel of the receiver, connect speakers with matching
impedance ratings. Using speakers with a rated impedance other
than that indicated on the rear panel of the receiver could result in
malfunctions or damage to the speakers or receiver.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting audio components
To AC wall outlet
L
R
IN
IN
REC OUT
PLAY IN
PHONO
CD/DVD
MD/TAPE
OUT
IN
Cassette Deck or
MD Recorder
OUT
CD Player or DVD Player
Moving coil (MC) cartridge record
player cannot be used directly
from the receiver unit. It can only
be used when another equalizer
amplifier is connected.
OUT
Record Player
CAUTION
Be sure to adhere to the following, or proper ventilation will be blocked causing damage or fire hazard.
• Do not place any object impairing heat radiation onto the top of the unit.
• Leave a space around the unit (from the largest outside dimension including projection) equal or greater than, shown below.
Top panel : 50 cm
Side panel : 10 cm
Back panel : 10 cm
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting video components
S VIDEO Jacks
About the S VIDEO Jacks
S VIDEO
OUT
S VIDEO
OUT
S VIDEO
OUT
VIDEO
S VIDEO
S VIDEO
IN
VIDEO
S VIDEO
IN
VIDEO
S VIDEO
IN
IN
Use the S VIDEO Jacks to
make connections to video
VIDEO
VIDEO
(DVD) (MONITOR)
c o m p o n e n t s
w i t h
S VIDEO IN/OUT Jacks.
If you use the S VIDEO jacks
•
to connect your video
playback components, be
sure to use the S VIDEO jacks
when connecting your
monitor and video recording
components.
OUT
VIDEO
IN
VIDEO
IN
VIDEO
IN
VIDEO
IN
VIDEO
VIDEO
OUT
DVD
MONITOR
REC OUT
PLAY IN
PLAY IN
PLAY IN
VIDEO 1
VIDEO 2
VIDEO 3
Monitor TV
VIDEO
IN
Video deck
IN
OUT
IN
OUT
Audio
Video
OUT
OUT
DVD Player or LD Player
DVD Player or LD Player
Video
Audio
OUT
OUT
Video
Audio
A video component with digital audio outputs should be connected to the VIDEO 2 or VIDEO 3 jacks.
EN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Digital connections
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals.
If you have connected any digital components to the receiver, be sure to read the “Input mode settings” section carefully.
8
COAXIAL
OPTICAL
CD/DVD
OPTICAL
VIDEO 3
OPTICAL DIGITAL OUT (AUDIO)
VIDEO
2
Optical
fiber cable
DVD/
6CH
CD Player or DVD Player
DIGITAL IN
OPTICAL DIGITAL OUT (AUDIO)
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
Optical fiber cable
Connect the video signal and digital
audio signals to the VIDEO 3 jacks.
(See “Connecting video compo-
nents”.)
!
COAXIAL DIGITAL OUT (AUDIO)
COAXIAL
DIGITAL
OUT
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
(AUDIO)
RF digital demodulator
(Commercially avail-
able)
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See “Connecting video compo-
nents”.)
!
DOLBY DIGITAL RF
OUT (AUDIO)
PCM OUT
LD Player
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the RF digital demodulator (Commercially available).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See “Connecting video components”.)
EN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting video components (COMPONENT VIDEO)
If you have connected the receiver to a video component with COMPONENT jacks, you can get a better picture quality than by connecting to the S-VIDEO
jacks.
COMPONENT VIDEO
VIDEO
3
IN
Y
CB
CR
DVD
IN
MONITOR OUT
CB
CR
Y
Monitor TV
(with component jacks)
CR IN
CB IN
Y IN
DVD Player (with component jacks)
CR OUT
CB OUT
Y OUT
Video Recorder, DVD Recorder,
Satellite Cable Tuner & Game
Player (with component jacks)
CR OUT
CB OUT
Y OUT
When connecting the TV to the COMPONENT jacks, be sure to connect all the other components to the COMPONENT jacks.
EN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting a DVD player (6-channel input)
If you have connected a DVD player to the receiver with digital connection, be sure to read the “Input mode settings” section carefully.
8
COAXIAL
OPTICAL
CD/DVD
OPTICAL
VIDEO 3
OUT
VIDEO
IN
VIDEO
IN
VIDEO
IN
VIDEO
IN
VIDEO
VIDEO
2
VIDEO
OUT
DVD/
6CH
DVD
MONITOR
DIGITAL IN
S VIDEO
OUT
S VIDEO
IN
VIDEO
S VIDEO
IN
VIDEO
S VIDEO
IN
VIDEO
VIDEO
OUT
DVD
MONITOR
CENTER
SUB
WOOFER
PLAY IN
PLAY IN
FRONT
SURROUND
VIDEO 2
VIDEO 3
DVD/6CH INPUT
FRONT
OUT L/R
COAXIAL
DIGITAL OUT
(AUDIO)
VIDEO OUT
SURROUND
OUT L/R
CENTER
OUT
DVD Player
SUBWOOFER
OUT
S VIDEO
OUT
S VIDEO cord
EN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the speakers
Surround Back/
Subwoofer
Surround Back Speakers
Use these terminals if you
wish to connect to Surround
Back Speakers with the
Use these terminals if you
wish to connect to a Sur-
round Back Speaker with
the SETUP of “SB/SW AMP
SB” or to connect to a
Subwoofer with the SETUP
of “SB/SW AMP SW”.
Surround Speakers
(Be sure to connect both
Surround Speakers)
SETUP of “SB/SW AMP
SW” or “SB/SW AMP OFF”.
Powered
Surround Back Speaker
Subwoofer
Right
Right
Left
Left
Power amplifier
Power amplifier
SURROUND BACK/
SUBWOOFER
SURROUND
GRAY
BLUE
BROWN
+
SURROUND
BACK
L
/
SURROUND
BACK
SURROUND
-
BACK
R
SURROUND
R
L
BACK
L
/
PRE OUT
SUB
WOOFER
SURROUND
BACK
When connecting a
single Surround Back
Speaker through a
SURROUND
BACK
R
power amplifier to PRE
OUT jack, connect it as
above and select “SB/
SW AMP SB” at
PRE OUT
speaker settings. &
RED
WHITE
GREEN
FRONT B
+
R
L
-
+
- -
+
R
FRONT A
L
CENTER
Right
Left
Front Speakers B
Center
Speaker
Left
Right
Front Speakers A
To make sure that each speaker has been connected properly, pay attention to the test tone from each speaker.
Refer to “5 Adjust the speaker volume level.”
*
EN
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting to the AV AUX Jacks
Connecting the antennas
The AV AUX jacks are convenient for connection of video components
such as a camcorder or a video game.
AM Loop Antenna
The supplied loop antenna is for use indoors. Place it as far as possible
from the receiver, TV set, speaker cords and power cord, and adjust the
direction for best reception.
AV AUX
AM Antenna Terminal connections
1 Push lever.
2 Insert cord.
3 Release lever.
FM Indoor Antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the
indoor antenna when you connect one outdoors.
S VIDEO
VIDEO
L-AUDIO-R
FM Antenna Terminal connections
Insert Connector.
S VIDEO cord
FM Outdoor Antenna
Lead the 75Ω coaxial cable connected to the FM outdoor antenna into the
room and connect it to the FM 75Ω terminal.
VIDEO OUT
Attach to the stand
Camcorder, other
VCR, video game or
portable MD Player
ANTENNA
S VIDEO OUT
AUDIO OUT
AM
AM Loop Antenna
GND
FM Indoor Antenna
75
FM
FM Outdoor Antenna
Use an antenna
adaptor
(Commercially
available)
• To select the source connected to the AV AUX jacks press AV
AUX key.
)
• When you connect the audio source such as the MD player, you
do not need to connect the video cable.
• When you connect the unit and the component with the S
VIDEO cord, you can get better picture quality.
EN
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for surround sound
The flow of the SETUP is as follows:
Speaker settings
To enable you to obtain optimum enjoyment from the receiver’s listening
modes, make sure to complete the speaker settings (Subwoofer, Front,
Center, Surround and Surround Back Speakers) as described below.
SP SETUP
Subwoofer
Front
TEST TONE
SP DISTANCE
Front Left
LFE LEVEL
DISP MODE
Display Selector
Display Listen
EXIT
T. TONE T. TONE
AUTO MANUAL
Center
L
L
C
R
Center
Front Right
C
Surround
POWER
ON/STANDBY
Surround Right
SR
SBR
SBL
SL
Surround
Back
R
Surround Back Right
SETUP MULTI CONTROL
SR
SBR
Surround Back Left
Surround Left
Subwoofer
Subwoofer
Re-mix
SW
SBL
SL
SW
• If you have selected “SB/SW AMP SB”, “SBR”/”Surround Back
Right” and “SBL”/”Surround Back Left” are not appeared but
“SB”/”Surround Back” is appeared on the Display.
TUNER
4Select a speaker system.
1 Select the SP SETUP and press the SETUP key again so that
POWER RCVR
(Multi %/fi,
@/#)
the subwoofer setting indication “SUBW ON” appears.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
Setup
SL
S
SB
SR
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the appropriate subwoofer setting.
1 SUBW ON : Subwoofer setting mode to the receiver is
ON.
1Turn on the power to this receiver by pressing the POWER
ON/STANDBY key or POWER RCVR key.
2 SUBW OFF : Subwoofer setting mode to the receiver is
OFF.
For the remote control, press and hold the TUNER key for
more than 3 seconds to switch to receiver mode.
2
• The initial setting is “SUBW ON”.
• When the setting “SUBW OFF” is selected, the Front Sspeakers
are automatically set to “FRNT LARGE” and the procedure skips
to step 6.
Before step 6, press the SETUP key to accept the setting.
• When Subwoofer output sound is required, select “FRNT
NORMAL”, or select both “FRNT LARGE” and “SW RE-MIX ON”.
• After setting SW (Subwoofer) from OFF to ON, SB/SW AMP setup
display will appear to enable you to re-select either SW or SB from
the Surround Back Speaker or Subwoofer terminal.
3Press the SETUP key to enter the SETUP mode.
The Surround Back Speaker and Subwoofer output selections are
displayed as follows:
1 SB/SW AMP SB :Surround Back/Subwoofer Speaker ter-
minal will output SB sound. Surround
Back pre out will have output from SBL
only.
2 SB/SW AMP SW :Surround Back/Subwoofer Speaker ter-
minal will output Subwoofer sound. Sur-
round Back pre out will have output from
SBL and SBR.
∧
3 Press the key or # key to accept the setting.
• The front speakers setting indication “FRNT” appears.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
3 SB/SW AMP OFF :It is not advisable to use Surround Back/
Subwoofer speaker terminal for this se-
lection.
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
Use the MULTI CONTROL knob or Multi (%/fi) keys to select the
speakers.
Press the SETUP key to proceed to the next SETUP selection.
4 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the appropriate front speakers setting.
∧
∨
Use / keys or @/ #keys for the following displays.
1 FRNT NORMAL
:
:
Average size Front Speakers are con-
nected to the receiver.
Large Front Speakers are connected
to the receiver.
1 SP SETUP
2 TEST TONE
3 SP DISTANCE
4 LFE LEVEL
5 DISP MODE
6 EXIT
2 FRNT LARGE
• For “FRNT LARGE” selection, no sound will be heard from
Subwoofer speaker even when it is set to on. However, if you
select “SW RE-MIX ON” when Subwoofer is selected, you will
be able to hear sound from the Subwoofer.
When in STEREO mode, the sound goes directly to Front
Speaker.
∧
5 Press the key or # key to accept the setting.
• The Center Speaker setting indication “CNTR” appears.
Continued to next page.
EN
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for surround sound
6 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the appropriate Center Speaker setting.
@ Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the appropriate Subwoofer re-mix setting.
If you selected “LARGE” as the Front Speakers setting,
1 SW RE-MIX ON : Subwoofer re-mix setting mode to
the receiver is ON.
2 SW RE-MIX OFF : Subwoofer re-mix setting mode to
the receiver is OFF.
1 CNTR NORMAL
2 CNTR LARGE
3 CNTR OFF
:
:
:
An average size Center Speaker is
connected to the receiver.
A large Center Speaker is connected
to the receiver.
Center Speaker setting mode to the
receiver is OFF.
• If Subwoofer is turned off, Subwoofer re-mix setting is not visible.
# Press the SETUP key again to return to the main setup
displays.
If you selected “NORMAL” as the Front Speakers setting,
1 CNTR NORMAL
:
:
An average size Center Speaker is
connected to the receiver.
Center Speaker setting mode to the
receiver is OFF.
5Adjust the speaker volume level.
From your usual listening position, adjust the volume levels. The
volume levels from each speaker should be the same.
2 CNTR OFF
∧
7 Press the key or # key again to accept the setting.
• In steps 5 and 6, indications appear only for the selected
channels of the speakers that require adjusting.
• The Surround Speaker setting indication “SURR” appears.
8 Use the MULTI CONTROL knob or Multi (%/fi) to select the
appropriate Surround Speaker setting.
∧
∨
1 Press the
/
keys or @/#keys to select TEST TONE.
• The receiver enters the speaker volume level adjustment mode.
If you selected “LARGE” as the Center Speaker setting,
2 Press the SETUP key for the following displays:
1 SURR NORMAL : Average size Surround Speakers are
1 T.TONE AUTO
2 T.TONE MANUAL
connected to the receiver.
2 SURR LARGE
:
:
Large Surround Speakers are
connected to the receiver.
Surround Speaker setting mode to
the receiver is OFF.
3 The selection of AUTO/MANUAL TEST TONE is done by the
MULTI CONTROL knob or Multi (%/fi) keys.
Press the SETUP key again to begin TEST TONE.
3 SURR OFF
Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the volume level of the test tone output from the speaker
channel to be adjusted.
If you selected other than “LARGE” as the Center Speaker
setting,
1 SURR NORMAL : Average size Surround speakers are
For AUTO selection, the first test tone is heard from the front left
speaker for 2.5 seconds. The next test tone is heard from the
speakers in the following sequence for 2 seconds each.
connected to the receiver.
Surround speaker setting mode to
the receiver is OFF.
2 SURR OFF
:
SR
SBR
LEFT
CNTR
SL
RIGHT
SBL
• When the setting “SURR OFF” is selected, the procedure skips
to step !.
SUBW
The channel indication blinks while the test tone is being output.
∧
9 Press the key or # keys again to accept the setting.
• The Surround Speaker setting indication “SB” appears.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
0 Use the MULTI CONTROL knob or Multi (%/fi) keys to
select appropriate Surround Back Speaker setting.
STEREO
TUNED
SL
S
SB
SR
If you selected “LARGE” as the Surround Speaker setting,
• If you have selected “SB/SW AMP SB”, “SBR” and “SBL” are
not appeared but “SB” is appeared on the Display.
• If you change the volume level settings for the speakers while
listening to music, the settings referred to on this page are also
1 SB NORMAL : Average size Surround Back Speaker is
connected to the receiver.
Large Surround Back Speaker is con-
nected to the receiver.
Surround Back Speaker setting mode
to the receiver is OFF.
2 SB LARGE
:
:
changed.
• If the speaker setting selects are OFF, the speaker level settings
arerest
º
3 SB OFF
.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
∧
A
B
CLIP
∨
/
For MANUAL selection, press the
time to select the speaker channel.
keys or @/# keys each
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
4 Press the SETUP key again.
• The test tone is turned off and return to the main setup displays.
If you selected “NORMAL” as the Surround Speaker setting,
6Input the distance to the speakers.
∧
1 SB NORMAL : Average size Surround Back Speaker is
∨
1 Press the
/
keys or @/# keys to select the SP DISTANCE on
connected to the receiver.
Surround Back Speaker setting mode to
the receiver is OFF.
setup displays and press the SETUP key again.
2 SB OFF
:
2 Measure the distance from the listening position to each of
the speakers.
• After setting SB (Surround Back) from OFF to NORMAL, SB/SW
AMP setup display will appear to enable you to re-select either SW
or SB from the Surround Back Speaker or Subwoofer terminal.
Jot down the distance to each of the speakers.
Distance to Front Left Speaker (L)
Distance to Center Speaker (C)
Distance to Front Right Speaker (R)
Distance to Surround Right (SR)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
∧
! Press the key or # key again to accept the setting.
• The Subwoofer remix setting indication “SW RE-MIX” appears.
Distance to Surround Back Right (SBR) : ____ feet (meters)
Distance to Surround Back (SB) : ____ feet (meters)
EN
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for surround sound
Distance to Surround Back Left (SBL) : ____ feet (meters)
Input level adjustment (analog sources only)
Distance to Surround Left (SL)
Distance to Subwoofer (SW)
: ____ feet (meters)
: ____ feet (meters)
If the input level of an analog source signal is too high, the CLIP indicator
will blink to indicate the source signal. Adjust the input level.
• If you have selected “SB/SW AMP SB”, “SBR” and “SBL” are
not appeared but “SB” is appeared on the Display.
CINEM
ACTIV
DSP
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
A
B
CLIP
OAXIAL
ANALOG
M
L
C
R
LFE
∧
∨
3 Use the
/
keys or @/# keys to select the speakers and the
SL
S
SB
SR
MULTI CONTROL knob or Multi (%/fi) keys to adjust the
distance to the Front Speakers.
1 Use the Input Selector keys to select the source of which the
input level you want to adjust.
The speaker indicator to be adjusted blinks.
CINEMA EQ. DTS. DOLBY DIGITAL
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS
NEO:6
CSII
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
THX
Surround EX
• You can store a separate input level for each input source.
A
B
CLIP
COAXIAL
ANALOG
L
C
SW
R
AUTO
MEMO
LFE
∧
∨
STEREO
TUNED
2 Press the SOUND and
/
keys or @/# keys repeatedly until
SL
S
SB
SR
the “INPUT” indication appears.
3
Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the
Indication in feet
Indication in meters
input level.
CINEMA EQ. DTS. DOLBY DIGITAL
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC
NEO:6
CSII
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
THX
Surround EX
• The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
A
B
CLIP
COAXIAL
ANALOG
L
C
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
4 Repeat steps 3 to input the distance for each of the speakers.
5 Press the SETUP key again to return to main setup displays.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
• The adjustment mode is displayed for approximately 20 seconds.
• The input level may be adjusted to any one of three settings:
0dB, -3dB, and -6dB. (The initial setting is 0dB.)
7Adjust the LFE LEVEL (Low Frequency Effects).
1 Select the LFE LEVEL from the setup displays and press the
4 Press the SOUND key again to return to the input indication.
SETUP key again.
2 Use the the MULTI CONTROL knob or Multi (%/fi) keys to
adjust the LFE LEVEL.
CINEMA EQ. DTS. DOLBY DIGITAL
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC
NEO:6
CSII
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
L
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
• The LFE LEVEL can be adjusted from 0dB to -10dB in 1dB
decrements.
3 Press the SETUP key again to return to main setup displays.
8Select the display mode.
∧
∨
1 Press the
/
key or @/# keys to select the DISP MODE.
2 Press the SETUP key for the following displays:
1 DISP SELECTOR
2 DISP LISTEN
:
:
Displays the current input selector.
Displays the current listen mode.
3 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the display mode.
DOLBY DIGITAL
CINEMA EQ.
ACTIVE EQ.
DTS.
MATRIX
NEO:6
CSII
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
CLIP
AUTO DETECT
THX
Surround EX
A
B
COAXIAL
ANALOG
96kHzfs DSP MODE DISCRETE PRO LOGIC
L
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
4 Press the SETUP key again to accept the setting.
∧
5 Use the key or # key to select EXIT.
CINEMA EQ. DTS. DOLBY DIGITAL
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC
NEO:6
CSII
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
L
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
6 Press the SETUP key to exit the SET UP mode.
EN
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal playback
Listening to a source component
Preparing for playback
Some preparatory steps are needed before starting playback.
VOLUME CONTROL
POWER
ON/STANDBY
A SPEAKERS B
INPUT MODE
Input Selector
AV AUX
MD/TAPE
Input Selector
Turning on the receiver
VOL
/
1 Turn on the power to the related components.
2 Turn on the power to this receiver by pressing the POWER
ON/STANDBY key.
Selecting the input mode
If you have selected a component connected to the CD/DVD, VIDEO 2,
VIDEO 3 or DVD/6CH jacks, make sure that the input mode setting is
Use the Input Selector and AV AUX keys to select the
source you want to listen to.
1
correct for the type of audio signal to be used.
8
Selecting a source using each key.
Selecting MD/TAPE
1 “DVD/6CH”
2 “CD/DVD”
3 “PHONO”
4 “TUNER”
5 “VIDEO 1”
6 “VIDEO 2”
7 “VIDEO 3”
8 “MD/TAPE”
9 “AV AUX”
Select the source name corresponding to the component connected
to the MD/TAPE jacks. The initial factory setting is “TAPE”. To
change the source to “MD”, follow the steps below:
Hold down the MD/TAPE key for more than 2 seconds.
• The source indication changes to “MD”.
• To return to the original indication, repeat the above procedure.
Selecting the speaker system
2Start playback from the selected source.
Press the A SPEAKERS B key to select the speaker system to be
used.
Use the VOLUME CONTROL knob or VOL +/
–
keys to adjust
3
A ON
B ON
:
:
Sound from the speakers connected to the SPEAKERS A
terminals on the rear panel.
Sound from the speakers connected to the SPEAKERS B
terminals on the rear panel. No sound will be heard from
the subwoofer.
the volume.
A+B ON : Sound from both the speakers connected to the
SPEAKERS A and B terminals on the rear panel.
A+B OFF : No sound from the speakers. Use this setting when
listening with headphones for stereo sound in all playback
modes. The display segments are different depending on
the type of input signal.
The indicator for the speakers
you want to use should be lit.
CIN
ACT
DS
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
A
B
CLIP
COAXIAL
ANALOG 96kHzfs
L
C
R
LFE
SL
S
SB
SR
• Selecting “6CH INPUT” by pressing the INPUT MODE key, whereby
“DVD/6CH” is the input source will cause SPEAKERS A to be selected
automatically.
EN
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal playback
Adjusting the sound
Once-touch low frequency emphasis (BASS BOOST)
(remote control only)
SPEAKER EQ LOUDNESS
A SPEAKERS B
TONE MULTI CONTROL
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo modes.
Press the Bass Boost key.
• Press the key once to select the maximum (+10) low frequency
emphasis setting.
• This key does not function when the receiver is in the sound quality
or ambience effects adjustment mode.
MUTE VOLUME
CONTROL
PHONES ACTIVE EQ
TUNER
Switching back to the previous setting
Press the Bass Boost key again.
POWER RCVR
(Multi %/fi)
Adjusting the LOUDNESS mode
You can adjust the Loudness function which controls the low volume
settings to maintain the music's richness. The adjustment can be made
when the receiver is in the PCM stereo and analog stereo mode.
Mute
Tone
VOL
Bass Boost
/
Press the LOUDNESS key to turn the LOUDNESS setting ON.
Loudness
Speaker EQ
Active EQ
To cancel
Press the LOUDNESS key again so that the “LOUDNESS”
indicator goes off.
Adjusting the TONE
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo mode.
Muting the sound
The MUTE key lets you mute the sound of the speakers.
1 For the remote control, press and hold the TUNER key for
more than 3 seconds to switch to receiver mode.
Press the MUTE key.
2 Press the TONE key to select the TONE mode.
CIN
AC
DS
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
A
B
CLIP
COAXIAL
ANALOG 96kHzfs
L
C
R
LFE
3 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
TONE ON/OFF.
SL
S
SB
SR
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
Blinks
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
R
AUTO
MEMO
LFE
To cancel
STEREO
TUNED
SL
S
SB
SR
Press the MUTE key again so that the “MUTE” indicator goes off.
• MUTE ON can also be deactivated by turning the VOLUME
CONTROL knob or pressing VOL +/– keys.
4 When in TONE ON selection, press the TONE key for the
following displays.
BASS
:
Select this to adjust the low frequency range.
TREBLE : Select this to adjust the high frequency range.
5 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the
sound quality.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
• The bass and treble levels are adjustable from -10 to +10 in 2 step
increments.
• The adjustment item is displayed for approximately 20 seconds.
EN
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal playback
ACTIVE EQ mode
Listening with headphones
You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON.
1
Press the A and B Speaker keys so that the speaker indicator
goes off.
Make sure the SPEAKERS
indicators are turned off.
Press the ACTIVE EQ key for the following selections;
1 ACTIVE EQ MUSIC : Effective when listening to music.
(The ACTIVE EQ indicator lights up.)
2 ACTIVE EQ CINEMA : Effective when watching a movie.
(The ACTIVE EQ indicator lights up.)
CINEMA EQ.
ACTIVE EQ.
DSP MODE
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
A
B
CLIP
COAXIAL
ANALOG
D
L
R
LFE
SL
S
SB
SR
3 ACTIVE EQ TV
: Effective when watching TV.
(The ACTIVE EQ indicator lights up.)
: The ACTIVE EQ function is turned OFF.
(The ACTIVE EQ indicator goes off.)
• If you turn off all of the speakers when in surround mode, the surround
mode will be canceled as well, resulting in stereo playback.
4 ACTIVE EQ OFF
2 Connect headphones to the PHONES jack.
•
“ACTIVE EQ” will scroll from right to left.
• ACTIVE EQ function will not be available when REC MODE, AUTO
TUNING or PRESET MEMORY is ON.
PHONES
SPEAKER EQ mode
SPEAKER EQ function is to adjust the receiver’s audio output
characteristics with the speakers’ characteristics which differs depending
on the size of the speakers. Especially for the music sound source
playback, the reproduced sound becomes more natural when adjusting
the output characteristics. When activating the SPEAKER EQ function,
you will be able to enjoy a more natural and dynamic sound experience
even with small size speakers.
3 Use the VOLUME CONTROL knob or VOL +/ keys to adjust
the volume.
–
Press the SPEAKER EQ key to switch the following setting;
1 SPEAKER EQ SMALL : To select a small size speaker.
(The SPEAKER EQ indicator lights up.)
2 SPEAKER EQ MEDIUM : To select a medium size speaker.
(The SPEAKER EQ indicator lights up.)
3 SPEAKER EQ OFF
: The SPEAKER EQ function is turned
OFF.
(The SPEAKER EQ indicator goes off.)
•
•
“SPEAKER EQ” will scroll from right to left.
SPEAKER EQ function will not be available when REC MODE, AUTO
TUNING or PRESET MEMORY is ON.
•
SPEAKER EQ function will not be available when “LARGE” is
selected for Front Speaker at the speaker settings.
EN
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording audio (analog sources)
3 Press and hold the DIMMER key for more than 2 seconds to
select the REC MODE AUTO or MANUAL.
1 REC MODE off
:
:
The digital input record mode is
switched off.
The digital input signals (DTS, Dolby
Digital, or PCM) are identified auto-
matically and converted into stereo
signals that are ready for recording.
2 REC MODE AUTO
3 REC MODE MANUAL: The input signal type at the moment
this mode is selected is held through-
out this mode.
MD/TAPE
Recording a music source
• When the REC MODE MANUAL is selected, the digital input signal
is converted to stereo signals (down-mix). But once the digital signal
is changed to other signal, no signal is output.
1 Use the Input Selector keys to select the source (other than “MD/
TAPE”) you want to record.
When the REC MODE AUTO is selected, the digital input signal is
converted to stereo signals even if the digital signal is changed.
2 Set the MD or TAPE recorder to record.
3 Start playback, then start recording.
For REC MODE AUTO :
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
R
AUTO
MEMO
LFE
Recording video
STEREO
TUNED
SL
S
SB
SR
1 Use the Input selector keys to select the video source (other than
“VIDEO 1”) you want to record.
2 Set the video deck connected to VIDEO 1 to record.
• Select the REC MODE to record a digital input source.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
CLIP
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
3 Start playback, then start recording.
• Recording may not be normal for some video software. This is due
to the copy guard condition.
w
For REC MODE MANUAL :
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
R
Recording audio (digital sources)
Switch on the REC MODE to record a digital input source.
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
Usually use the REC MODE AUTO to record audio input sources. When
the digital mode changes during recording in the REC MODE AUTO, the
audio input source may be interrupted momentarily.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
R
AUTO
MEMO
Recording music in REC MODE AUTO or MANUAL
LFE
STEREO
TUNED
SL
S
SB
SR
DIMMER
4 Start playback, then start recording.
• If the audio reproduction stops in the middle due to change in the
input signals, etc., press the DIMMER key.
Input Selector
1 Use the Input Selector keys to select the source (CD/DVD,
DVD/6CH, VIDEO 2, VIDEO 3) you want to record.
2 Set the MD or TAPE recorder to record.
EN
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to radio broadcasts
The receiver can store up to 40 stations in the memory and recall them
by one-touch operation.
Presetting radio stations manually
Tuning radio stations
MULTI CONTROL
BAND
MULTI CONTROL
TUNER AUTO
TUNER MEMORY
TUNER
1Tune to the station you want to store.
(Multi %/fi)
2Press the MEMORY key while receiving the station.
Blinks for 20 seconds
Lights for 20 seconds
Band
Auto
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
Tune – 1
Tune + ¡
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
R
AUTO
MEMORY
STEREO
TUNED
LFE
SL
S
SB
SR
Proceed to step 3 within 20 seconds.
(If more than 20 seconds elapse, press the MEMORY key again).
1Use the TUNER key to select the tuner.
2Use the BAND key to select the desired broadcast band.
Each press switches the band.
Use the MULTI CONTROL knob or Multi (%/ fi) keys to
3
select one of the station presets (1 – 40).
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
R
AUTO
MEMO
LFE
4Press the MEMORY key again to confirm the setting.
• Repeat steps 1, 2, 3, and 4 to store as many stations as
necessary.
STEREO
TUNED
SL
S
SB
SR
3Use the AUTO key to select the desired tuning method.
Each press switches the tuning method to either auto or manual
tuning.
• If you store a station at a previously used preset, the old station will
be replaced by the new one.
“AUTO” indicator lights up in the display.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
CAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
XIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
AUTO
STEREO
TUNED
• Normally, set to “AUTO” (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
Use the MULTI CONTROL knob or Multi (%/ fi) keys, or
4
Tune – 1 / + ¡ keys to select the station.
“STEREO” lights when a broadcast is being received in stereo.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
TICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
AXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
AUTO
MEMO
STEREO
TUNED
“TUNED” is displayed when a station is received.
Auto tuning : The next station is tuned automatically.
Manual tuning : Turn the knob or use the Multi (%/fi) keys to
select the desired station.
EN
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to radio broadcasts
Receiving preset stations
Receiving preset stations in order (P.CALL)
TUNER
TUNER
(P.Call @/#)
Numeric keys
1Press the TUNER key to select tuner as the source.
1Press the TUNER key to select the tuner as the source.
2Use the P.Call @/ # keys to select the desired station.
Enter the number of the preset station you want to receive
(up to “40”).
2
• Each time you press the key, another preset station is received in
order.
Press the Numeric keys in the following order:
For “15”, press
For “20”, press
0,5
0,0,)
Pressing the P.Call # does the following:
• If you make a mistake entering a two digit number, press the +10
key repeatedly to return to the original display and start again.
Pressing the P.Call @ does the following:
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
Holding down the # or @ keys, lets you skip through the
presets, receiving each preset station at 0.5 second intervals.
EN
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
This receiver is equipped with listening modes that allow you to enjoy an enhanced sonic ambience with a variety of video
sources.
In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand.
&
Surround modes
The below speaker placements are for 5.1 channel surround
The below speaker placements are for 6.1 channel surround
sound system which are;
•Dolby Digital
•Dolby Pro Logic II
•DTS
sound system which are;
•Dolby Digital EX
•DTS-ES
•NEO:6
•DTS 96/24
•DSP
•DVD 6-channel
TV / SCREEN
TV / SCREEN
SW
C
SW
C
R
R
L
L
SL
SR
SL
SR
SB
With Surround Back speaker
No Surround Back speaker
The below speaker placements are for 7.1 channel surround
sound system which is;
•Dolby Pro Logic IIx
L
Front Left Speaker
SW
C
Subwoofer
Center Speaker
R
Front Right Speaker
Surround Left Speaker
Surround Right Speaker
Surround Back Speaker
Surround Back Left Speaker
Surround Back Right Speaker
SL
SR
SB
SBL
SBR
TV / SCREEN
SW
C
R
L
Manufactured under license from Dolby Laboratories. “Dolby”,
“Pro Logic”, “Surround EX” and the double-D symbol are trade-
marks of Dolby Laboratories.
SL
SR
“DTS”,”DTS-ES”,“Neo:6” and
“DTS 96/24” are trademarks of Digi-
tal Theater Systems, Inc.
Note
LFE = Low Frequency Effects. This channel delivers separate
non-directional bass signals to the subwoofer for more dynamic
deep bass sound effects.
SBL
SBR
With Surround Back Left and Right speakers
EN
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Dolby Digital
DTS
The Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from Dolby Digital program
The DTS multi-channel audio format is available on CD, LD and
DVD software. DTS is a strictly digital format and cannot be
decoded inside most CD, LD or DVD players. For this reason, if you
attempt to listen to DTS encoded software through the analog
output of your new CD, LD or DVD player, you will experience
digital noise in most cases. This noise can be quite loud if the
analog output is connected directly to a high power amplification
system. Proper measures for playing the digital output as de-
scribed below should be taken to avoid this situation. To enjoy DTS
Digital Surround playback, an external 5.1 channel DTS Digital
Surround decoder system or an amplifier with a built-in DTS Digital
Surround decoder must be connected to the digital output (S/P
DIF, AES/EBU or TosLink) of a CD, LD or DVD player.
sources (such as Laserdisc or DVD software marked
).
Compared with previous Dolby surround, Dolby Digital provides
even better sound quality, greater spatial accuracy, and improved
dynamic range.
Dolby Digital EX
Dolby Digital EX is an extension of Dolby Digital technology, Dolby
Digital EX creates six full-bandwidth output channels from 6.1-
channel sources. This is done using a matrix decoder that derives
three surround channels from the two in the original recording.
This is achieved by using three different surround signals, sur-
round left, surround right, and surround back, each driving its own
array of speakers. Think of it as adding a center channel for the rear
speakers, which give more diffuse and natural surround effect,
even if you wanted the ability to completely encircle the audience
with sound, positioning sound effects exactly where they would
be heard in real life. For best results, Dolby Digital EX should be
used with movie soundtracks recorded with Dolby Digital Sur-
round EX which contain a digital flag that will automatically
activate this feature. However, for titles released prior to late
2001, this feature has to be activated manually.
All models are incorporated with the DTS decoder.
DTS-ES
DTS-ES (Digital Theater System-Extended Surround) presents 6.1
channels surround system with additional Surround Back channel
which evolved from the conventional 5.1 channels surround
system. DTS-ES format that was recorded in DVD, CD or LD
comprises of two modes. DTS-ES Discrete 6.1 produces the
discrete surround back which is completely independent and DTS-
ES Matrix 6.1 produces the surround back which synthesised
within the left and right surround channels using matrix technol-
ogy. DTS-ES has perfect compatibility with the conventional 5.1
channels surround system. 6.1 channels surround with an addi-
tional surround back presents a more natural presence and sur-
round effects by increasing the impression of the sound image
from back. Programs which are recorded using DTS-ES technol-
ogy consist of information flags which will be able to control the
Discrete and Matrix mode. Thus, it can automatically select the
best matched mode.
This model lets you enjoy Dolby Digital (and Dolby Surround)
program sources, even if you connect only the Front Speakers.
However, in order to enjoy the benefit of true 6.1 channel Dolby
Digital Surround EX sound or 5.1 channel Dolby Digital Surround
sound, KENWOOD recommends that you connect a full set of
speakers.
Although only Dolby Digital soundtracks incorporate a separate
low frequency channel, connecting a subwoofer will also improve
deep bass performance in the other surround modes.
Neo:6
The indication “LFE” appears in the display when a signal is being
Neo:6 is a new technology which was developed by DTS. It can
produce high grade 6 channels surround with an astonishing
fidelity from 2 channels content. Neo:6 has 2 modes, “CINEMA”
mode is for movie playback and “MUSIC” mode is for music
playback.
input for this channel.
§
Dolby PRO LOGIC IIx and Dolby PRO LOGIC II
Dolby Pro Logic II was designed specifically to provide a new
sense of spatiality, directionality and articulation of sounds from
Dolby Surround encoded sources (such as video and Laserdisc
DTS 96/24
DTS 96/24 made it possible to achieve a wide frequency range of
over 40 kHz by increasing the sampling frequency to 96 or 88.2
kHz. Moreover, DTS 96/24’s ability of 24 bit resolution offers the
same frequency band and dynamic range as 96 kHz/24 bit PCM.
DTS 96/24 is, as with conventional DTS Surround, compatible with
multi-channels. Therefore, sources recorded using DTS 96/24
technologies can be played in high sampling frequency, multi-
channel audio with ordinary DVDs and CDs.
software marked
). This is achieved with an intelli-
gent, built-in feedback logic design, a matrix surround decoding
and the decoding of stereo, full bandwidth surround outputs.
DOLBY PRO LOGIC IIx enhanced DOLBY PRO LOGICII’s fea-
tures.
It creates 6.1 channel and 7.1 channel surround sound from stereo
or 5.1 channel signals. This feature provides you an astonishing
ambience effect which makes you feel you are surrounded by
natural sound. Especially 7.1 channel surround sound can produce
real back sound from Surround Back speakers.
DTS has a “.1” or “LFE” channel.
The indication “LFE” appears in the display when a signal is being
The PRO LOGICIIx modes programmed into this model are
“MOVIE”, “MUSIC” and “GAME”. The PRO LOGIC II modes
programmed into this model are “MOVIE”, “MUSIC”, “GAME”
and “PRO LOGIC”. The “MOVIE” mode has preset characteris-
tics to produce a calibrated, high-level surround sound playback
while the “MUSIC” mode has user-adjustable characteristics to
offer the three optional controls, like “Dimension”, “Center Width”
and “Panorama” modes to allow optimization of the soundfields
as desired. The “Dimension” control allows the user to gradually
adjust the soundfield either towards the front or towards the rear;
the “Center Width” control allows various adjustment of the left-
center-right speakers’ balance; the “Panorama” mode extends
the front stereo image to include the surround speakers for an
exciting “wraparound” effect with side wall imaging.
input for this channel.
§
The “GAME” mode provides surrounded and exciting sound
when you enjoy game or TV. Especially in PRO LOGICIIx “GAME”
mode, base sound not only from Front and Center but also from
Surround channel is added to Subwoofer. This provides ever more
dynamic surround effects.
EN
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
DSP mode
Surround play
The DSP mode lets you add the atmosphere of a live concert or hall
to almost any type of program source. These modes are particu-
larly effective when used with stereo program sources, like CD,
television, and FM radio. You might enjoy trying the ARENA, JAZZ
CLUB, THEATER, STADIUM or DISCO mode the next time you
watch a concert or sporting event!
The DTS compatible models can reproduce a CD, DVD, or LD carrying the
DTS mark.
DOLBY DIGITAL can be used when playing DVD or LD software bearing
the
mark and DOLBY DIGITAL format digital broadcasts (etc.).
DOLBY PRO LOGIC can be used when playing video, DVD, or LD
software bearing the
mark.
What's DSP?
DSP stands for Digital Signal Processor.
DSP
INPUT MODE
The way a sound is heard in an actual environment depends on a
variety of different factors. One of the most important is rever-
beration (the act of decaying elements of sound echoing in various
places). The DSP modes produce the feeling of presence by using
the DSP to create reverberation, without spoiling the sound
quality of the original signal.
Input Selector
LISTEN MODE
DVD 6-channel mode
Input
Selector
Using a DVD player or the like equipped with six (5.1) output
channels and this model, you can enjoy multi-channel encoded
DVD source material in all its splendor. Since the source signals
are digital and each channel is input independently, the resulting
sound quality, sense of spaciousness, and dynamic range are
superb.
The indication “6CH INPUT” appears in the display during DVD 6-
channel mode selection.
Input Mode
Listen Mode 5/∞
DSP Mode
Preparations
• Turn ON related components.
• Complete “Preparing for surround sound” (speaker settings).
&
• Use the Input Selector keys to select the component you wish to play
back with surround sound.
• Use the INPUT MODE key to select the input mode (analog or digital)
for the source you wish to play back.
8
• Noise will be produced when a DTS source is played by selecting the
analog input.
1Start playing the video software.
Use the LISTEN MODE knob or Listen Mode 5/ ∞keys to
2
select the listening mode.
The listening mode settings are stored separately for each input. If
the input mode is set to full auto (“AUTO DETECT” lights), the
receiver selects the optimal listening mode automatically based on
the type of input signal and the speaker settings.
Each turn of the LISTEN MODE knob or press of the Listen Mode
5/ ∞keys switches the setting as listed below.
The listening mode settings are different depending on the type
of input signal.
Dolby Digital Surround EX compliant disc :
Dolby Digital Surround EX compliant disc contains identification
signals. When you choose FULL AUTO during “Input mode set-
tings” (8), this amplifier detects the identification signals and
change the LISTEN mode to the DOLBY DIGITAL EX (Dolby Digital
Surround EX mode) automatically.
But sometimes we find some discs which are Dolby Digital Sur-
round EX compliant disc but it does not contain the identification
signals. If you find the notice like “Surround EX” on the label of disc
or package, you can choose DOLBY DIGITAL EX, then you can
enjoy Dolby Digital Surround EX sound.
EN
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
When the DOLBY DIGITAL or DOLBY DIGITAL EX signal is
input :
6 PLII GAME
: PRO LOGIC II surround GAME mode.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround PRO LOGIC mode.
(The PRO LOGIC indicator lights up.)
(The DOLBY DIGITAL or PRO LOGIC indicator lights up.)
7 PRO LOGIC
1 DOLBY DIGITAL
: DOLBY DIGITAL surround.
8 NEO:6 CINEMA : NEO:6 surround CINEMA mode.
(The NEO:6 indicator lights up.)
9 NEO:6 MUSIC : NEO:6 surround MUSIC mode.
(The NEO:6 indicator lights up.)
2 DOLBY D EX
: DOLBY DIGITAL EX surround.
3 ŸD+PLIIx MOVIE : DOLBY DIGITAL+PRO LOGIC IIx
surround MOVIE mode.
(The PRO LOGIC indicator lights up.)
4 ŸD+PLIIx MUSIC : DOLBY DIGITAL+PRO LOGIC IIx
surround MUSIC mode.
0 STEREO
:
Normal stereo playback.
(The STEREO indicator lights up.)
(The PRO LOGIC indicator lights up.)
: DOLBY PRO LOGIC IIx surround
MOVIE mode.
(The PRO LOGIC indicator lights up.)
: DOLBY PRO LOGIC IIx surround
MUSIC mode.
• Dolby Digital or DTS signal having more channels than the maximum
number of playback channels available using the receiver’s current
settings is input, downmixing is performed to match the number of
available channels.
5 PLIIx MOVIE
6 PLIIx MUSIC
7 PLIIx GAME
(The PRO LOGIC indicator lights up.)
: DOLBY PRO LOGIC IIx surround GAME
mode.
3DSP mode (Digital Signal Processor).
DSP can produce these effects without spoiling the sound quality of
the original music or video source.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround MOVIE mode.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround MUSIC mode.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround GAME mode.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround PRO LOGIC mode.
(The PRO LOGIC indicator lights up.)
: Normal stereo playback.
8 PLII MOVIE
9 PLII MUSIC
0 PLII GAME
- PRO LOGIC
= STEREO
1 Pressing the DSP key or DSP Mode key will display the
current DSP MODE status.
2 Each press of the key will switch to the next status as shown
bellow:
1 ARENA
: DSP surround ARENA mode.
: DSP surround JAZZ CLUB mode.
: DSP surround THEATER mode.
: DSP surround STADIUM mode.
: DSP surround DISCO mode.
2 JAZZ CLUB
3 THEATER
4 STADIUM
5 DISCO
When you select DOLBY DIGITAL
“DOLBY DIGITAL” will be displayed.
• The DSP mode selection is displayed for approximately 3 seconds.
CINEMA EQ. STEREO NEO:6
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
DTS.
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
DOLBY DIGITAL
THX
Surround EX
A
B
CLIP
4Adjust the volume.
COAXIAL
ANALOG
L
C
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
SR
Notes
• Depending on the type of the signal or speaker setting, some listening
modes cannot be selected.
• When playback is started, the sound may be cut or interrupted before
the input source is confirmed as Dolby Digital.
• To enjoy Dolby Digital surround (as well as all the other listening modes)
from a single component, be sure to use a Dolby Digital compatible
source component.
When the DTS or DTS-ES (matrix or discrete) signal is input :
1 DTS-ES Mtrx 6.1 : DTS-ES MATRIX 6.1 channel surround.
(DTS and MATRIX indicators light up.)
2 DTS-ES Dscrt 6.1 : DTS-ES DISCRETE 6.1 channel surround.
(DTS and DISCRETE indicators light up.)
3 DTS
: DTS 5.1 channel surround.
(DTS indicator lights up.)
4 DTS+NEO:6 Cin : DTS+NEO:6 surround CINEMA mode.
(DTS and NEO:6 indicators light up.)
5 NEO:6 CINEMA : NEO:6 surround CINEMA mode.
(NEO:6 indicator lights up.)
6 NEO:6 MUSIC
7 DTS 96/24
8 STEREO
: NEO:6 surround MUSIC mode.
(NEO:6 indicator lights up.)
: DTS 96/24 playback mode.
(DTS indicator lights up.)
: Normal stereo playback.
When the analog signal or the digital signal (except for
DOLBY DIGITAL or DTS signal) is input :
1 PLIIx MOVIE : PRO LOGIC IIx surround MOVIE mode.
(The PRO LOGIC indicator lights up.)
2 PLIIx MUSIC : PRO LOGIC IIx surround MUSIC mode.
(The PRO LOGIC indicator lights up.)
3 PLIIx GAME
4 PLII MOVIE
5 PLII MUSIC
:
:
:
PRO LOGIC IIx surround GAME mode.
(The PRO LOGIC indicator lights up.)
PRO LOGIC II surround MOVIE mode.
(The PRO LOGIC indicator lights up.)
PRO LOGIC II surround MUSIC mode.
(The PRO LOGIC indicator lights up.)
EN
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
DVD 6-channel playback
Convenient functions
Using a DVD player or the like equipped with six (5.1) output channels and
the receiver, you can enjoy surround sound playback.
Connecting a DVD player which can decode the surround signal itself is
also acceptable.
STEREO DIMMER MULTI CONTROL
VOLUME
CONTROL
INPUT MODE
SOUND
LISTEN MODE
TUNER
DVD/6CH
(Multi %/fi,
@/ #)
DVD/6CH
Sound
Dimmer
Listen Mode5/∞
Stereo
VOL
/
Input Mode
Adjusting the sound
You can make further adjustments to the sound while listening to
playback in the surround mode.
Preparations
1
For the remote control, press and hold the TUNER key for
more than 3 seconds to switch to receiver mode.
• Connect your DVD player to the DVD/6CH jacks of the receiver.
• Turn on all other components that will be used.
• Complete “Preparing for surround sound”.
&
∧
∨
/
2 Press the SOUND key and then use the
keys or @/#keys until
the desired item appears in the display.
1Press “DVD/6CH” as the input source.
• If speaker system B is on when “DVD/6CH” is selected as the input
source, it switches off and speaker system A turns on automatically.
∧
∨
/
Each time you press the
as follows:
keys or @/#keys, the menu changes
Note that some items are not displayed depending on speaker
settings and listening modes.
2Select "6CH INPUT" by pressing the INPUT MODE key.
3Start playback of the DVD software.
4Adjust the volume.
1 CNTR (Center speaker level adjustment)*
2 SR (Surround Right speaker level adjustment)*
3 SBR (Surround Back Right speaker level adjustment)*
4 SBL (Surround Back Left speaker level adjustment)*
5 SL (Surround Left speaker level adjustment)*
6 SUBW (Subwoofer level adjustment)*
7 INPUT (Input level adjustment - analog mode only)
8 MIDNIGHT (Midnight mode ON/OFF - Dolby Digital and DTS
mode only)
9 PANORAMA (Panorama mode ON/OFF)**
0 DIMENSION (Dimension adjustment)**
- CENTER WIDTH (Center width adjustment)**
= DUAL MONO (Dual Mono selection - Dolby Digital mode only)
• It is not possible to adjust the volume level or sound quality (SET
UP, SOUND, LISTEN MODE, ACTIVE EQ, SPEAKER EQ, STE-
REO, DSP, LOUDNESS and TONE key will not be functional) of
the channels separately when the receiver is in the 6CH INPUT
mode. Adjust the volume with the controls of the DVD player.
For the powered subwoofer, you can adjust the volume of the
subwoofer using the subwoofer’s own volume control.
(
*
The adjustment is only temporary for the current input selection.
The value will return automatically to the original setup value when
the power is turned on/off or when the input selection is changed.
** Pro Logic IIx and Pro Logic II Music mode only.
•
If you have selected “SB/SW AMP SB”, “SBR” and “SBL” are
not appeared but “SB” is appeared on the Display.
3 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the
setting as desired.
• The adjustment item is displayed for approximately 20 seconds.
EN
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Soundfield is adjusted towards the rear.
Midnight mode (Dolby Digital and DTS mode only)
CINEMA EQ.
ACTIVE EQ.
DSP MODE DISCRETE
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
CLIP
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
PRO LOGIC
COAXIAL
ANALOG
LOUDNESS
CSII
L
R
When watching movies at night , you might not be able to raise the volume as
loud as normal. Midnight mode compresses the dynamic range of previously
specified heavy sound passage of the Dolby Digital and DTS sound track (like
scenes with sudden increases in volume) to minimize the difference in volume
between the scenes with heavy sound passage and scenes with normal sound
passage. This makes it easy to hear all of the sound track, even when listening
at low volumes.
AUTO
MEMO
LFE
STEREO
TUNED
Center Width mode (Pro Logic IIx Music and Pro Logic II
Music mode only)
∧
∨
/
1 Press the SOUND key, then press the
keys or @/#keys until
Center width adjustment allows you to enjoy an enhanced sound when
listening to music through center image from only center speaker, or left
and right speakers or various combinations adjustments.
“MIDNIGHT” appears on the display.
• This can be selected only if CD/DVD, DVD/6CH, VIDEO 2 or VIDEO 3
is selected as the source and the input signal is set to “DOLBY
DIGITAL” or “DTS”.
∧
∨
/
1 Press the SOUND key, then press the
“CENTER WIDTH” appears on the display.
keys or @/#keys until
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the ON or OFF setting.
• The CENTER WIDTH indication scrolls across the display.
• When the center speaker is switched OFF, this mode will not be
effective.
CINEMA EQ. STEREO NEO:6
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
DTS.
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
DOLBY DIGITAL
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
L
C
R
AUTO
MEMO
LFE
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
STEREO
TUNED
SL
S
SB
SR
the left-center-right output.
Center image will be heard from center speaker only.
• The adjustment item is displayed for approximately 20 seconds.
• Some Dolby Digital or DTS software may not be compatible with the
Midnight mode.
CINEMA EQ.
ACTIVE EQ.
DSP MODE DISCRETE
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
PRO LOGIC
COAXIAL
ANALOG
LOUDNESS
CSII
L
R
AUTO
MEMO
LFE
STEREO
TUNED
S
SB
Center image will be heard from left and right speakers only.
Panorama mode (Pro Logic IIx Music and Pro Logic II Music
mode only)
CINEMA EQ.
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE
DTS.
DOLBY DIGITAL
STEREO NEO:6
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
THX
Surround EX
A
B
CLIP
PRO LOGIC
COAXIAL
ANALOG
LOUDNESS CSII
L
R
AUTO
MEMO
LFE
When listening to music, you will be able to enjoy the “wrap-around”
sound effect when you adjust the panorama mode.
STEREO
TUNED
S
SB
∧
∨
/
1 Press the SOUND key, then press the
keys or @/#keys until
• When in other position, center image from center speaker, left and
right speakers can be heard simultaneously with various combinations.
“PANORAMA” appears on the display.
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to
select PANORAMA ON or OFF.
1 PANORAMA ON : PANORAMA mode is ON.
2 PANORAMA OFF : PANORAMA mode is OFF.
CINEMA EQ.
ACTIVE EQ.
DSP MODE DISCRETE
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
CLIP
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
PRO LOGIC
COAXIAL
ANALOG
LOUDNESS
CSII
L
R
AUTO
MEMO
LFE
STEREO
TUNED
S
SB
Dimension mode (Pro Logic IIx Music and Pro Logic II Music
mode only)
When listening to music with certain recordings, you will also be able to achieve
a suitable balance from all the speakers by adjusting the dimension mode.
∧
∨
/
1 Press the SOUND key, then press the
keys or @/#keys until
“DIMENSION” appears on the display.
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the soundfield towards the rear or the front.
Soundfield is adjusted towards the front.
CINEMA EQ.
ACTIVE EQ.
DSP MODE DISCRETE
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
CLIP
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
PRO LOGIC
COAXIAL
ANALOG
LOUDNESS
CSII
L
R
AUTO
MEMO
LFE
STEREO
TUNED
Soundfield is in neutral position.
CINEMA EQ.
ACTIVE EQ.
DSP MODE DISCRETE
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
CLIP
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
PRO LOGIC
COAXIAL
ANALOG
LOUDNESS
CSII
L
R
AUTO
MEMO
LFE
STEREO
TUNED
S
SB
EN
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Dual Mono mode (Dolby Digital mode only)
96kHz LPCM playback
When the Dolby Digital source have Multiplex sound, you can select
Main / Sub sound for Audio output.
The receiver is compatible with the 96kHz LPCM playback. To play a
96kHz DVD, set the listen mode other than DSP mode.
∧
∨
/
1 Press the SOUND key, then press the
keys or @/#keys until
• When in FULL AUTO input mode and the listen mode is set to DSP
mode, the listen mode will automatically be STEREO.
“DUAL MONO” appears on the display.
• When in DIGITAL MANUAL input mode and the listen mode is set to
DSP mode, “96kHz LPCM” will appear in the display and no sound can
be heard from the speakers.
• This can be selected only if CD/DVD, DVD/6CH, VIDEO 2 or VIDEO 3
is selected as the source and the input signal is set to “Dolby Digital.”
Press the Listen Mode or Stereo key (the listen mode changes to the
STEREO mode) to output sound from the speakers.
2 Use the MULTI CONTROL knob or Multi (%/fi) keys for the
following selection.
1 Main
2 Sub
3 Main + Sub
4 Stereo
:
:
:
:
Multiplex Main channel output.
Multiplex Sub channel output.
Multiplex Main + Sub channel output.
Stereo output for Audio sound.
LFE
• The adjustment item is displayed for approximately 20 seconds.
Display dimmer adjustment
The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch
movies or listen to music.
Each time you press the DIMMER key, the display brightness
changes among the three available settings.
Select the brightness level you find most pleasing.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL
MATRIX
NEO:6
CSII
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
L
L
L
R
R
R
AUTO
MEMO
LFE
STEREO
TUNED
DOLBY DIGITAL
PRO LOGIC
SP
A
SP
DOLBY DIGITAL STEREO
PRO LOGIC
A
EN
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
The remote control supplied with this receiver is also capable
Press the Numeric key to enter the four-digit code for the
component to be registered.
4
of controlling components from a variety of manufacturers
once you register the appropriate setup codes into the
remote control unit.
• If performed correctly, the LED will blink twice.
• Point the remote control at the component and press SRC Power
key once. It should turn on/off but if it does not, repeat step 2to 4
• If the component still does not work, try searching for the code.
Low battery warning
Replace all two batteries with new ones when you notice a shortening
of the distance from which the remote control will operate.The
remote control is designed to retain setup codes in memory while
you change batteries.
Repeat steps 2to 4to register additional components until
all components have been registered.
5
Note
Although each setup code is designed to work with a number of
different models, certain codes may not work with some models.
(Also, certain codes may only operate some of the functions available
on a given model.)
Registering setup codes for other components
LED
Source
keys
SRC Power
Numeric keys
Searching for your codes
If you component does not respond after trying all the codes listed for
your component, or if your component is not listed at all, try searching
for your code.
For example, to search for code for your TV:
Remote
Setup
Press the TV key once. Next, press and hold the Remote Setup
key until the LED blinks twice, then release the Remote Setup
key.
1
Find the setup code of the component to be registered.
1
2Press the Numeric key to enter 9, 9, 1.
• Refer to the setup code lists to find the setup code for the
•The LED will blink twice.
component to be registered.
fi
Example: To register a DVD made by KENWOOD, you would enter
“0534”.
3Point the remote control at the TV and slowly alternate
between pressing the SRC Power and TV keys.
Input jack Component
Maker
Code
Key
•Stop when the TV turns on or off.
DVD/6CH
DVD player KENWOOD
0534
DVD 6CH
•In the search mode, the remote control will send IR codes from its
library to the selected device, starting with the most popular code
first.
Source key
Other components
4Press the Remote Setup key once to lock in the code.
TUNER
Receiver (KENWOOD)
5To search for the codes of your other components, repeat
steps 1through 4, but substitute the appropriate key (i.e.,
DVD/6CH, CD/DVD, VID1, VID2, VID3, TV, MD/TAPE, AV AUX,
PHONO).
DVD/6CH
CD/DVD
MD/Tape
VID1 / AV AUX
VID2
DVD
CD and MD (KENWOOD)
Cassette deck (KENWOOD)
VCR and PVR
•PHONO key has to be re-assigned to another key before a setup
code can be programmed.
Cable and DTV decoder
DSS
VID3
PHONO
TV
Additional key for re-assigning
TV/VCR combo, TV/DVD combo, TV
Press the source keys (DVD/6CH, CD/DVD, VID1, VID2, VID3,
2
TV, MD/TAPE, AV AUX, PHONO).
7
• PHONO key has to re-assigned to another key before a setup
code can be registered.
›
• While in Tuner mode, setup code function will not be available.
Press and hold the Remote Setup key until the LED blinks
twice, then release the Remote Setup key.
3
EN
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Checking the codes
To clear the re-assignment and reset the remote control to its
original operation mode:
5
If you have setup the remote control using the procedures described in
“Searching for your codes”, you may need to find out which four-digit
code is operating your equipment:
1 Press and hold the Remote Setup key until the LED blinks
twice, then release the remote setup key.
For example, to find out which code is operating your TV:
2 Press the Numeric key to enter 9, 9, 2.
Press the TV key once. Next, press and hold the Remote Setup
key until the LED blinks twice, then release the Remote Setup
key.
1
3 Press VID2 key twice.
• When a re-assignment is done, the LED will blink twice to confirm
your choice. At that time, you will need to program the remote
control in order to control the new component.
2Press the Numeric key to enter 9, 9, ).
•The LED will blink twice.
• If an invalid key sequence is entered, the LED blink once and return
to normal operation.
3To view the code for the first digit, press “1” once. Wait for 3
seconds, counts the number of times the LED blinks (e.g.,
blinks=3) and write down that number.
• When in Tuner mode, re-assignment is not available.
•If a code digit is “0”, the LED will not blink.
Operating other components
This operation lets you operate the registered components.
4Repeat step 3three more times for the remaining digits. Use
“2” for the second digit, “3” for the third digit, and “4” for the
fourth digit.
5To check the codes of your other components, repeat steps
1 through 4, but substitute the appropriate key (i.e.,
DVD/6CH, CD/DVD, VID1, VID2, VID3, TV, MD/TAPE, AV AUX,
PHONO) for the component you are checking.
Source
keys
SRC Power
• As suggested earlier on, write down each of the four-digit code.
• PHONO key has to be re-assigned to another key before a setup
code can be programmed.
Re-assigning device keys
The remote control can be setup to control second TV or VCR, or any
combination of eight home entertainment components.
For example, to control the operation of two different VCR using the
remote control, the user need to re-assign the unused VID2 key to
operate the second VCR(VID1) as follows:
Use the source keys to select the component you desire.
• Pressing the source keys also changes the input selector on the
receiver.
1
Press the SRC Power key.
Press and hold the Remote Setup key until the LED blinks
twice, then release the Remote Setup key.
2
1
• To return to the receiver operation mode, press the TUNER key for
more than 3 seconds.
2Press the Numeric key to enter 9, 9, 2.
Press the operation keys you desire.
The remote control mode remains at the selected input. If you
·
3
• The LED will blink twice.
wish to operate another component, repeat step 2or 3.
3Press VID1 key once, then press the VID2 key once.
• The user now can operate VID2 as a second VCR along with VID1.
Resetting the Remote control
• To initilize the remote control, press the Remote Setup key until
the LED blinks twice. Then press the Numeric key to enter 9,
8, 1. The LED will blink twice.
• Refer to the table in the previous page for the combination of
source keys and the other components assignment.
‹
4To re-assign other device keys, repeat steps 1through 3 by
substituting the key sequence from the below chart for the
most popular components:
To re-assign key
Sequence
Perform
TV as 2nd VID1 key
TV as 2nd VID2 key
TV as 2nd CD/DVD key
TV as 2nd TV key
VID1 as 2nd TV key
VID1 as 2nd VID2 key
VID1 as 2nd CD/DVD key
VID1 as 2nd VID1 key
Remote Setup
Remote Setup
Remote Setup
Remote Setup
Remote Setup
Remote Setup
Remote Setup
Remote Setup
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
2 VID1 TV
2 VID2 TV
2 CD/DVD TV
2 TV TV
2 TV VID1
2 VID2 VID1
2
CD/DVD VID1
2 VID1 VID1
EN
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart
VCR setup codes
Maker
Setup Codes
Maker
Setup Codes
Admiral
American High
Bell & Howell
Broksonic
Canon
0048, 0209
Sanyo
0047, 0104
0035
Scott
0043, 0045, 0121, 0184
0035, 0042, 0047, 0104
0045
0104
Sears
0121, 0184, 0209
Semp
0035
Sharp
0048
Carver
0081
Sonic Blue
Sony
0614, 0616
Craig
0047
0032, 0033, 0035, 0636, 1032
0035, 0043, 0081
0035, 0162
Curtis Mathes
Daewoo
Denon
0035, 0060, 0162, 0760
Sylvania
Technics
Teknika
Tivo
0045
0042
0035
Emerex
Emerson
Fisher
0032
0618, 0636
0043, 0121, 0184, 0209
0047, 0104
0033, 0035
0035, 0060, 0760
0047
Toshiba
Vector
0043, 0045
0045
Fuji
Video Concepts
Wards
0045
GE
0035, 0042, 0047, 0048, 0060, 0081,
0760
HI-Q
White Westinghouse
XR-1000
0209
Harman/Kardon
Hitachi
0081
0035
0042
Zenith
0033, 0039, 0209
Hughes Network
Systems
0042
JVC
0067
Kenwood
Kodak
0067
0035
MEI
0035
Cable setup codes
MGA
0043
Maker
Setup Codes
Magnavox
Marantz
Matsushita
Memorex
0035, 0039, 0081, 0563
0035, 0081
0035, 0162
ABC
0003, 0008, 0014, 0017
Americast
Bell & Howell
Bell South
Director
General Instrument
GoldStar
Hamlin
0899
0014
0035, 0039, 0047, 0048, 0104, 0162,
0209
0899
Minolta
Mitsubishi
Motorola
NEC
0042
0476
0043, 0067
0035, 0048
0067, 0104
0035
0003, 0276, 0476, 0810
0144
0009, 0273
Olympus
Optimus
Orion
Jerrold
0003, 0012, 0014, 0276, 0476, 0810
0048, 0104, 0162,1048, 1062
0184, 0209
0035, 0162, 0225, 0616, 1062
0035, 0042
0042
Memorex
Motorola
Pace
0000
0276, 0476, 0810, 1106
Panasonic
Penney
Pentax
Philco
0237
Panasonic
Paragon
Philips
0000, 0107
0000
0035, 0209
0035, 0081, 0618, 1081, 1181
0067
0305, 0317
Philips
Pioneer
0144, 0533, 0877, 1877
Pioneer
Polk Audio
Proscan
Pulsar
Pulsar
0000
0081
Quasar
0000
0060, 0760
0039
Regal
0273, 0279
Runco
0000
Quasar
RCA
0035, 0162
0042, 0060, 0760
0035, 0047, 0048, 0104
0614, 0616
0039
Samsung
Scientific Atlanta
Sony
0144
0008, 0017, 0477, 0877, 1877
Realistic
ReplayTV
Runco
1006
Starcom
Supercable
Tocom
0003
0276
STS
0042
0012
Samsung
Sanky
0045
Torx
0003
0039, 0048
0067, 0209
Toshiba
Zenith
0000
Sansui
0000, 0525, 0899
EN
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart
TV setup codes
Maker
Setup Codes
Maker
Setup Codes
AOC
0019, 0030
GE
0021, 0047, 0051, 0178, 0251, 0451,
0747, 0804, 0807, 0809, 0811, 1147,
1347
Admiral
Adventura
Aiko
0093, 0463
0800
Gibralter
GoldStar
Gradiente
Grunpy
Hallmark
Harley Davidson
Harman/Kardon
Harvard
Havermy
Hitachi
Infinity
Inteq
0017, 0019, 0030
0092
0019, 0030, 0178, 0802, 0814
Aiwa
0701, 0800, 0802
0053, 0056, 0800
Akai
0030
0179, 0180
Alaron
0179
0178
America Action
Ampro
0180
0179, 0800
0751
0054
Anam
0180
0180
Apex Digital
Asha
0748, 0765, 0767
0093
0804
0016, 0056, 0145, 0800
Audiovox
Baysonic
Belcor
0092, 0180, 0451, 0623, 0802
0054
0180
0017
0019
JBL
0054
Bell & Howell
Beaumark
Bradford
Brockwood
Broksonic
CXC
0016, 0154
JCB
0000
0804
JVC
0053
0180
KEC
0180, 0802
0019
KTV
0030, 0180
0236, 0463, 0817, 0901
Kenwood
Kodak
0019, 0030
0180
0802
Calix
0802
Konka
0632, 0628, 0638, 0703, 0707
0056
Candle
0030, 0056
LG
Carnivale
Carver
0030
LXI
0047, 0054, 0154, 0156, 0178, 0747,
0802
0054
Celebrity
Changhong
Cineral
0000
Logik
0016
0765
Luxman
Lloyd’s
MGA
0056
0092, 0451
0800
Citizen
0030, 0056, 0060, 0092, 0802, 0816
0019, 0030, 0150, 0178, 0804
0019, 0030, 0056, 0060, 0800, 0804
Concerto
Contec
0056
MTC
0180
Magnavox
0030, 0054, 0179, 0800, 0818, 1254,
1454
Craig
0180, 0802, 0804
0054
Crosley
Crown
Magnasonic
Magnin
0816
0180
0804
Curtis Mathes
0016, 0030, 0047, 0054, 0056, 0060,
0093, 0145, 0154, 0166, 0451, 0466,
0747, 0809, 1147, 1347
Majestic
Marantz
0016
0030, 0054
0802
Marta
Cybernex
Daewoo
0804
Matsushita
Megatron
Memorex
0250
0019, 0092, 0451, 0623, 0816
0145, 0178
Daytron
0019
0016, 0150, 0154, 0178, 0179, 0250,
0463, 0800, 0802, 0804, 0810, 0812,
0814, 0815
Denon
0145
Dumont
0017, 0019
0800
Dynatech
Dwin
MGN Technology
Midland
Minutz
0804
0720, 0774
0000
0017, 0047, 0051, 0747
Electroband
Electrohome
Electrophonic
Emerson
0021
0802
Mitsubishi
Motorola
Multitech
NAD
0019, 0093, 0150, 0178, 0807
0802
0093
0019, 0154, 0178, 0179, 0180, 0236,
0463, 0623, 0800, 0802, 0816, 0817
0180, 0800
0156, 0166, 0178
Envision
Fisher
0030
NEC
0019, 0030, 0056, 0497
0154
NTC
0092
Fujitsu
0179, 0683
Nikko
0030, 0092, 0178, 0802
Funai
0171, 0179, 0180, 0800
Noblex
0804
Futuretech
Garrard
0180
0800
Onwa
0180
Optimus
Optonica
0154, 0166, 0250, 0802, 0812, 0815
0093
EN
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart
Maker
Setup Codes
Maker
Setup Codes
Orion
0179, 0236, 0463, 0817
Techwood
Teknika
0051, 0056
Panasonic
0051, 0250, 0809, 0812, 0815, 0907,
0908
0016, 0019, 0054, 0056, 0060, 0092,
0150, 0179, 0180, 0800, 0802
Penney
0019, 0021, 0030, 0047, 0051, 0060,
0156, 0178, 0747, 0802, 0804, 0809,
0814, 1347
Telefunken
Thomas
0056
0800
Toshiba
0060, 0154, 0156, 0901, 0906, 1256
Philco
0019, 0030, 0054, 0145, 0463
0054, 0904, 1454
0019, 0030, 0802
0166, 0679
Totevision
Unitech
0802, 0804
0804
Philips
Pilot
Vector Research
Victor
0030
Pioneer
Portland
Princeton
Prism
0053
0019, 0092
Videomagic
Vidikron
0802
0717
0054, 0242
0019, 0178
0804
0051
Vidtech
Proscan
Profitronic
Proton
Pulsar
0047, 0747, 0811
0804
Videosonic
Villian
0800
0178, 0466
Wards
0016, 0019, 0021, 0030, 0054, 0056,
0178, 0179, 0800, 0804
0017, 0019
Quasar
RCA
0051, 0250, 0809, 0812
Waycon
0156
0019, 0047, 0090, 0679, 0747, 0804,
0807, 0809, 0811, 0905, 1047, 1147,
1247, 1347, 1447, 1547
White Westinghouse
XR-1000
0463, 0623, 0816
0800
RadioShack
0019, 0030, 0047, 0056, 0154, 0178,
0180, 0747, 0800, 0810
Yamaha
0019, 0030, 0769
0016, 0017, 0092, 0463, 0800, 0817
Zenith
Radix
0802
0802
Randex
Realistic
0019, 0030, 0056, 0154, 0178, 0180,
0800, 0802
DSS setup codes
Runco
SSS
0017, 0030, 0251, 0497, 0603
Maker
Setup codes
0019, 0180
0030
Sampo
Samsung
Alpha Star
Chaparral
Crossdigital
Dishpro
Echostar
Expressvu
GE
0772
0216
1109
0775, 1005
1005, 0775
0775
0566
0775
0019, 0030, 0056, 0060, 0178, 0766,
0804
Sansei
Sansui
Sanyo
Scimitsu
Scotch
Scott
0451
0463, 0800 0817, 0901
0154, 0804
0019
GOI
0178
General Instrument
HTS
Hitachi
Hughes Network System 0749, 1749, 1142
JVC
Magnavox
Memorex
Mitsubishi
Motorola
Next Level
Panasonic
Paysat
0869
0775
0819
0019, 0178, 0179, 0180, 0236
Sears
0047, 0054, 0056, 0154, 0156, 0171,
0178, 0179, 0747, 0800, 0802, 0814
Semivox
Semp
0180
0775
0722, 0724
0724
0749
0869
0869
0247, 0701
0724
0156
Sharp
0093, 0688, 0689, 0807, 0900
Shogun
Signature
Sony
0019, 0804
0016
0000, 0800, 0813
Soundesign
Squareview
Starlite
0178, 0179, 0180
0171
Philips
1076, 1142, 0722, 0724, 0749,
1749
0180
Proscan
RCA
RadioShack
SKY
Samsung
Sony
Star Choice
Toshiba
Uniden
Zenith
0392
Supreme
Sylvania
Symphonic
TMK
0000
0566, 0392, 0143, 0855
0869
0856
1109
0639
0869
0749, 0790, 1749
0724, 0722
0856, 1856
0030, 0054, 0171, 0800, 0818, 0903
0171, 0180, 0800
0056, 0178, 0804
0017
TNCi
Tandy
0093
Teac
0800
Technics
Technol Ace
0051, 0250
0179
EN
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart
DVD player Setup codes
DTV decoders setup codes
Maker
Setup Codes
Maker
Setup Codes
Aiwa
0641
Panasonic
Pioneer
1120
Apex Digital
0672, 0717, 0755, 0794, 0795, 0796,
0797, 0830
1010
Princeton
Samsung
Sensory Science
Sharp
0113, 0295
1190
Blue Parade
DVD2000
Daewoo
Denon
0571
0521
1126
0784
1010
0490, 0634
0591
Emerson
Enterprise
Fisher
0591
Cassette deck Setup codes
0670
GE
0522, 0717, 0815
0769
Maker
Setup Codes
GPX
Kenwood
0070, 0071, 0092, 0183, 0205, 0233,
0234, 0251, 0386
Go Video
Gradiente
Greenhill
Harman/Kardon
Hitachi
0715
0651
0717
0582, 0702
0573, 0664
0672
CD and MD players setup codes
Hiteker
JBL
Maker
Setup Codes
0702
Kenwood
0028, 0037, 0190, 0338, 0339, 0340,
0523, 0626, 0677, 0681, 0826, 0858,
0859, 1490
JVC
0558, 0623
0717
KLH
Kenwood
Konka
0490, 0534, 0682
0711
Koss
0651
Magnavox
Marantz
Microsoft
Mintek
0503, 0675
0539
0522
0717
Mitsubishi
Nesa
0521
0717
Onkyo
0503
Oritron
0651
Panasonic
Philips
0490, 1490
0503, 0539, 0646
0525, 0571
0539
Pioneer
Polk Audio
Proscan
RCA
0522
0522, 0571, 0717
0823
Rowa
Sampo
0698
Samsung
Sanyo
0573
0670
Shinsonic
Sony
0533
0533
Sylvania
Technics
Theta Digital
Toshiba
Urban Concepts
Yamaha
Zenith
0675
0490
0571
0503
0503
0490, 0539, 0545
0503, 0591
EN
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
CASSETTE deck, CD player & MD recorder operations
Refer to the following for the type of remote control operations available for each component.
• When pressing keys in succession, press each key firmly and be sure
1 Select the input source.
to wait at least 1 second before pressing the next key.
• Numeric keys function the same as the numeric keys on the original
remote.
2 Press the keys corresponding to the operations you desire.
Refer to the following sections for details.
These keys can be used to perform the basic operations of KENWOOD and other manufacturers’ components which the setup code for each
component had been entered beforehand.
Cassette deck operations keys
CD player operation keys
DVD
6CH
TUNER
DVD
6CH
TUNER
VID3
CD
DVD
VID1
CD
DVD
VID1
VID2
VID3
AV AUX
MD
TAPE
VID2
AV AUX
MD
TAPE
PHONO
TV
POWER
RCVR
PHONO
TV
SRC Power
POWER
RCVR
w
e
(Source power)
SRC Power
4
5
4
5
(Source power)
3
6
8
Multi
3
6
Multi
Enter
2
7
Numeric keys
(Select tracks)
Enter
2
7
Multi
Multi
1
1
8
0
9
+
10
+100
TV Mute
0
9
+
10
+100
TV Mute
Disc sel.
(Disc selection)
Page
A/B
(Cassette Deck
selection)
Return
Exit
OSD
Guide
Page
Last
/A/B
Return
Exit
OSD
Guide
Last
/A/B
Disc Skip
Menu
Disc Skip
Menu
Disc Sel.
Mute
Disc Sel.
Mute
Input Sel.
Input Sel.
Disc skip
¢
+
CH
+
VOL
–
Tone
¢
+
CH
+
VOL
–
¢(Skip up)
Tone
Sound
4
4(Skip down)
Sound
–
4
–
TV
VOL
Bass
Boost
TV Input
+
–
TV
VOL
Bass
Boost
TV Input
+
–
Tune
–
Band
Tune
+
1(Rewind)
¡(Fast Forward)
1(Search)
¡(Search)
Tune
–
Band
Tune
+
Dimmer
Auto
Top Menu
Dimmer
Auto
Top Menu
¶
3
(Record)
(3Play)
Setup
Info/Flip
8(Pause)
Input
Mode
Setup
Info/Flip
Loudness
Input
Mode
Loudness
/
8
7(Stop)
Active
EQ
Remote
Setup
3/8
(Play/pause)
Active
EQ
Remote
Setup
2(Reverse play)
Listen Mode
7(Stop)
DSP
Mode
Speaker
EQ
Listen Mode
Stereo
DSP
Mode
Speaker
EQ
Stereo
MD recorder operation keys
DVD
6CH
TUNER
CD
DVD
VID1
VID3
AV AUX
MD
VID2
TAPE
PHONO
TV
POWER
RCVR
e
SRC Power
4
5
(Source power)
3
6
7
8
Multi
Enter
2
Numeric keys
(Select tracks)
Multi
1
+100
0
9
+
10
+100
TV Mute
(Select tracks)
Page
Return
Exit
OSD
Guide
Last
/A/B
Disc Skip
Menu
Disc Sel.
Mute
Input Sel.
¢
+
CH
+
VOL
–
Tone
¢(Skip up)
4(Skip down)
Sound
4
–
TV
VOL
Bass
Boost
TV Input
+
–
1 (Search)
¡ (Search)
Tune
–
Band
Tune
+
Dimmer
Auto
Top Menu
8
(Pause)
Setup
Info/Flip
Input
Mode
Loudness
¶(Record)
7(Stop)
3
/
8
(3Play)
Active
EQ
Remote
Setup
Listen Mode
DSP
Mode
Speaker
EQ
Stereo
EN
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Other components’ operations
Refer to the following for the type of remote control operations available for each component.
TV operation keys
VCR operation keys
DVD
6CH
DVD
6CH
TUNER
VID3
TUNER
VID3
CD
DVD
CD
DVD
VID1
VID1
AV AUX
AV AUX
MD
TAPE
MD
TAPE
VID2
VID2
PHONO
TV
we
PHONO
TV
POWER
POWER
RCVR
RCVR
o
e
SRC Power
(Source power)
TV Power
4
5
4
5
%(Cursor up)
3
6
8
3
6
fi(Cursor down)
@(Cursor left)
#(Cursor right)
Multi
Multi
%(Cursor up)
Numeric keys
Enter
Numeric keys
fi(Cursor down)
@(Cursor left)
#(Cursor right)
Enter
Enter
2
7
2
7
Enter
Multi
Multi
1
1
8
0
9
0
9
Exit
Exit
Guide
Menu
+
10
+100
TV Mute
+
10
+100
TV Mute
TV mute
Page
Page
Return
Exit
OSD
Guide
Return
Exit
OSD
Guide
Input Sel.
Last/AB
Last/AB
LAST
(Last channel)
Disc Skip
Menu
Guide
Menu
Disc Skip
Menu
(Input selection)
Disc Sel.
Disc Sel.
Mute
Mute
Input Sel.
Last
(Last channel)
Input Sel.
¢
+
CH
+
VOL
–
¢
Tone
+
CH
+
VOL
–
Tone
CH + / –
(Channel + / –)
CH + / –
(Channel + / –)
Sound
Sound
4
4
–
–
TV Input
TV
VOL
Bass
Boost
TV
VOL
Bass
Boost
TV Input
+
TV Input
–
Tune
+
–
TV VOL
–
Band
Tune
+
Tune
–
Band
Tune
+
1(Rewind)
¡(Fast Forward)
Dimmer
Auto
Top Menu
Dimmer
Auto
Top Menu
¶
3
2
(Record)
(3Play)
(Display)
Setup
Info/Flip
Setup
Info/Flip
Input
Mode
Input
Mode
Loudness
Loudness
8(Pause)
7(Stop)
/
8
2(Display)
Active
EQ
Remote
Setup
Active
EQ
Remote
Setup
Listen Mode
Listen Mode
DSP
Mode
Speaker
EQ
DSP
Mode
Speaker
EQ
Stereo
Stereo
DVD Player operation keys
DVD
6CH
TUNER
VID3
CD
DVD
VID1
VID2
AV AUX
MD
TAPE
PHONO
TV
we
POWER
RCVR
o
SRC Power
(Source power)
4
5
%(Cursor up)
3
6
8
Numeric keys
Multi
fi(Cursor down)
@(Cursor left)
#(Cursor right)
(Select tracks)
Enter
2
7
Enter
Multi
1
Page ∞/5
0
9
+
10
+100
TV Mute
(Page down or up)
+ 100
Page
Return
Exit
OSD
Guide
OSD (On Screen Display)
Menu
Disc Skip
Return
Last/AB
Disc Skip
Menu
Disc Sel.
Mute
Disc Sel.
(Disc selection)
Input Sel.
¢
+
CH
+
VOL
–
Tone
Sound
1(Search)
4
¢Skip up
4Skip down
–
¡(Search)
TV
VOL
Bass
Boost
TV Input
+
–
Tune
–
Band
Tune
+
Dimmer
Auto
Top Menu
Top Menu
(Title)
8(Pause)
Setup
Info/Flip
Input
Mode
Loudness
Active
EQ
Remote
Setup
7(Stop)
3
/8
(3Play)
Listen Mode
DSP
Mode
Speaker
EQ
Stereo
EN
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Refer to the following for the type of remote control operations available for each component.
DSS operation keys
Cable operation keys
DVD
6CH
TUNER
VID3
DVD
6CH
TUNER
VID3
CD
DVD
VID1
CD
DVD
VID1
AV AUX
MD
TAPE
VID2
AV AUX
MD
TAPE
VID2
PHONO
TV
we
POWER
RCVR
PHONO
TV
POWER
RCVR
o
o
w
SRC Power
(Source power)
SRC Power
(Source power)
4
5
%(Cursor up)
4
5
%(Cursor up)
3
6
8
Multi
3
6
8
fi(Cursor down)
@(Cursor left)
#(Cursor right)
fi(Cursor down)
@(Cursor left)
#(Cursor right)
Multi
Enter
Numeric Keys
Enter
2
7
Enter
2
7
Numeric keys
Multi
Enter
Multi
1
1
Page ∞/5
0
9
Exit
+
10
+100
TV Mute
0
9
Guide
Menu
+
10
+100
TV Mute
(Page down or up)
Guide
Menu
Last
(Last channel)
Page
Page
Return
Exit
OSD
Guide
Return
Exit
OSD
Guide
Last/AB
Exit
Last/AB
Disc Skip
Menu
Disc Skip
Menu
Disc Sel.
Mute
Disc Sel.
Mute
Input Sel.
Input Sel.
(Input selection)
Last
(Last channel)
Input Sel.
¢
+
CH
+
VOL
–
Tone
Input Sel.
(Input selection)
¢
+
CH
+
VOL
–
Tone
Sound
4
Sound
–
4
–
CH + / –
(Channel + / –)
Bass
Boost
TV
VOL
TV Input
+
–
TV
VOL
Bass
Boost
TV Input
+
CH + / –
(Channel + / –)
–
Tune
Tune
–
Band
Tune
+
–
Band
Tune
+
Dimmer
Auto
Top Menu
Dimmer
Auto
Top Menu
Setup
Info/Flip
Setup
Info/Flip
Input
Mode
Loudness
Input
Mode
Loudness
Info
(Information)
Active
EQ
Remote
Setup
Active
EQ
Remote
Setup
Info
(Information)
Listen Mode
Listen Mode
DSP
Mode
Speaker
EQ
Stereo
DSP
Mode
Speaker
EQ
Stereo
REMOTE CONTROL UNIT RC-R0823
REMOTE CONTROL UNIT RC-R0823
Notes
1. Certain codes may only operate some of the function available on a given model.
2. The above show the typical type functions available for each component. Some manufacturers use different key combinations to perform similar
functions. For that reason, we have programmed extra functions on some of the unused number keys to help you control your equipment.
EN
41
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
Resetting the Microcomputer
The microcomputer may malfunction (unit cannot be operated, or
shows an erroneous display) if the power cord is unplugged while
the power is ON, or due to some other external factor. If this
happens, execute the following procedure to reset the
microcomputer and return the unit to its normal operating
condition.
Unplug the power cord from the wall outlet, then plug it
back in while holding down the POWER ON/STANDBY
key.
•Please note that resetting the microcomputer will clear the contents
of the memory and returns the unit to the state it was in when it left
the factory.
Amplifier
Symptom
Cause
Remedy
No sound from the speakers.
• The speaker cords are disconnected.
• Connect them properly referring to
“Connecting the speakers”
• Adjust the volume to a proper level.
• Turn OFF the MUTE.
%
• VOLUME is set to the minimum position.
• MUTE is ON.
• The SPEAKERS switches are set to OFF.
¡
)
• Set the SPEAKERS switches to ON.
The standby indicator blinks and sound is • Speaker cords are short-circuited.
not output.
• Turn the power off, eliminate the short-
circuiting, then turn on the power again.
Sound is not output from one of the speakers. • The speaker cord is disconnected.
• Connect it properly referring to “Connecting
the speakers”.
• Set it up properly referring to “Speaker set-
tings”.
%
• The speaker is not set up correctly.
&
Sound is not output from the surround • The surround speaker cords and/or the center • Connect it properly referring to “Connecting
speakers and / or the center speaker, or their
sound is very small.
speaker cord is disconnected.
• The speaker is not set up correctly.
the speakers”.
• Set it up properly referring to “Speaker set-
tings”.
%
&
• A surround mode has not been engaged.
• Select a surround mode.
• The surround and/or center volume controls • Adjust the speaker levels using the test tone.
are set to the minimum level.
*
A humming noise is generated when the • The audio cord from the record player is not • Insert the audio cord plugs securely into the
PHONO input selector is selected.
connected to the PHONO jacks.
• The record player is not grounded.
PHONO jacks.
• Connect the grounding wire to the GND
terminal on the rear panel.
When playing a Dolby Digital source signal • There are many possible causes for this • Set the input mode to digital manual before
using a DVD player, the sound is cut off soon
after it starts.
problem, depending on the type of DVD player
used.
starting playback of the Dolby Digital source.
8
No sound is produced during playback from • The input mode is set to digital manual.
a DVD player.
• Press the INPUT MODE key to select to full
auto mode.
8
A video source cannot be recorded
normally.
• The software is copy-guarded.
• Copy-guarded video software cannot be
recorded.
Tuner
Symptom
Cause
Remedy
Radio stations cannot be received.
• No antenna is connected.
• The broadcast band is not set properly.
• Connect an antenna.
• Set the broadcast band properly.
^
• The frequency of the desired station is not • Tune the frequency of the desired station.
tuned.
¢
Interference.
• Noise due to ignition noise from an automobile. • Install the outdoor antenna away from the
• Noise due to interference from an electric
appliance.
road.
• Turn off the power to the appliance.
• Noise due to a nearby TV set.
• Install the receiver farther away from the TV.
A station which was preset cannot be • The preset station belongs to a frequency that • Preset a station with a receivable frequency.
received by pressing the corresponding
numeric key.
cannot be received.
• The preset memory was cleared because the • Preset the station again.
power cord had been unplugged for a long
period of time.
EN
42
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
Remote control unit
Symptom
Cause
Remedy
Certain inputs cannot be selected using the
remote control.
• No setup codes registered for the respective • Register a setup code at the respective input(s).
input(s).
fi
Remote control operation is not possible.
• The remote control is set to a different operation • Press any of the Input Selector keys to select
mode.
the appropriate operation mode.
• Replace with new batteries.
• Batteries are exhausted.
• The remote control unit is too far away from • Operate the remote control unit within the
the main system, controlling angle is too large,
or there is an obstacle between the receiver
and the remote.
controllable range.
• No tape or CD is placed in the source • Place the tape or CD in the source component
component. which you want to play.
• An attempt is made to play a tape which is • Wait until recording has completed.
being recorded in the cassette deck.
• The remote control has not been set to the • Press any of the source keys or SRC Power
operation mode for the component you wish
to control.
key to activate the operation mode for the
component you want to control before
operation.
›
EN
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution : Read this page carefully to ensure safe
operation.
Specifications
AUDIO section
Rated power output during STEREO operation
VIDEO section
VIDEO inputs / outputs
VIDEO (composite) .................................................. 1 Vp-p / 75 Ω
S VIDEO inputs /outputs
S VIDEO (luminance signal) ................................... 1 Vp-p / 75 Ω
S VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75 Ω
COMPONENT VIDEO inputs /outputs
100 watts per channel minimum RMS, both channels driven,
at 8 Ω from 20 Hz to 20 kHz with no more than 0.09% total
harmonic distortion. (FTC)
COMPONENT VIDEO (luminance signal) .............. 1 Vp-p / 75 Ω
COMPONENT VIDEO (CB/CR-signal) ............ 0.32 Vp-p / 75 Ω
Effective power output during SURROUND operation
FRONT (20 ~ 20 kHz, 0.09 % T.H.D. at 8 Ω one channel driven)
............................................................................... 100 W + 100 W
CENTER (20 ~ 20 kHz, 0.09 % T.H.D. at 8 Ω one channel
driven) .................................................................................. 100 W
SURROUND (20 ~ 20 kHz, 0.7 % T.H.D. at 8 Ω one channel
driven) ................................................................... 100 W + 100 W
SURROUND BACK/SUBWOOFER (20 ~ 20 kHz, 0.09 % T.H.D.
at 8 Ω one channel driven)................................................. 100 W
Total harmonic distortion .......................0.009 % (1 kHz, 50 W, 8 Ω)
Frequency response
(CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)........
.................................................10 Hz ~ 100 kHz, +0 dB ~ –3.0 dB
PHONO ‘RIAA’ response ..............40 Hz ~ 20 kHz, +1.5 dB ~ –3.0 dB
Maximum input level
PHONO (MM) ....................................40 mV, 1 % T.H.D. at 1 kHz
Signal to noise ratio (IHF’66)
PHONO (MM) ........................................................................ 75 dB
(CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH) .........
............................................................................................... 95 dB
Loudness control
FM tuner section
Tuning frequency range................................. 87.5 MHz ~ 108.0 MHz
Usable sensitivity (MONO)..................................................................
......................... 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz dev, SINAD 30 dB)
50 dB quieting sensitivity
STEREO ..................................................... 28 µV (75 Ω)/ 40.2 dBf
Total harmonic distortion
MONO (1 kHz, 75 kHz dev) .......................... 0.5% (65 dBf input)
STEREO (1 kHz, 67.5 + 6.75 kHz dev) ......... 0.7% (65 dBf input)
Signal to noise ratio
MONO (1 kHz, 75 kHz dev) ........................ 75 dB (65 dBf input)
STEREO (1 kHz, 67.5 + 6.75 kHz dev) ....... 68 dB (65 dBf input)
Stereo separation (1 kHz) ........................................................... 40 dB
Selectivity ( 400 kHz) ................................................................. 70 dB
Frequency response (30 Hz ~ 15 kHz) .................... +0.5 dB, –3.0 dB
VOLUME at –30 dB level ...................................... +6 dB (100 Hz)
Input sensitivity / impedance
PHONO (MM) ........................................................ 6.0 mV / 47 kΩ
(CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH) .........
.............................................................................. 500 mV / 47 kΩ
Output level / impedance
TAPE REC ............................................................... 500 mV / 1 kΩ
PRE OUT (SURROUND BACK CHANNEL) ..................1 V / 1 kΩ
PRE OUT (SUBWOOFER) .............................................1 V / 1 kΩ
Tone control
AM tuner section
Tuning frequency range
10 kHz step .................................................. 530 kHz ~ 1,700 kHz
Usable sensitivity (30% mod, S/N 20 dB) ..........................................
................................................................................16 µV / (600 µV/m)
Signal to noise ratio (30% mod, 400 Hz) ............................................
.................................................................. 50 dB (60 dBµV EMF input)
BASS................................................................ 10 dB (at 100 Hz)
TREBLE ............................................................ 10 dB (at 10 kHz)
GENERAL
Power consumption ................................................................... 3.4 A
DIGITAL AUDIO section
AC outlet
SWITCHED ......................................... (total 150 W, 1.25 A max.)
Dimensions..................................................... W : 440 mm (17-5/16")
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length
H
D
: 159 mm (6-1/4")
Optical ........................... (–15 dBm ~ –24 dBm), 660 nm 30 nm
Coaxial................................................................... 0.5 Vp-p / 75 Ω
: 392 mm (15-7/16")
Weight (Net) ............................................................ 11.0 kg (24.3 lb)
Notes
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer
to the model and serial numbers whenever you call upon your dealer for
information or service on this product.
Model__________________ Serial Number________________________
EN
44
Download from Www.Somanuals.com. All Manuals Search And Download.
|