Kenwood Stereo Receiver KRF V6060D User Manual

AUDIO VIDEO SURROUND RECEIVER  
-
VR 6050  
-
KRF V7060D  
-
KRF V6060D  
INSTRUCTION MANUAL  
KENWOOD CORPORATION  
This instruction manual is for some models. Model availability and features  
(functions) may differ depending on the country and sales area.  
About the supplied remote control  
Compared to standard remote controls, the remote control supplied with this receiver has several  
operation modes. These modes enable the remote control to control other audio/video components. In  
order to effectively use the remote control it is important to read the operating instructions and obtain a  
proper understanding of the remote control and how to switch its operation modes (etc.).  
Using the remote control without completely understanding its design and how to switch the operation  
modes may result in incorrect operations.  
B60-5192-10 03 MA (K, P, T, M, Y, X)  
0109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before applying the power  
Contents  
Caution : Read the pages marked  
safe operation.  
carefully to ensure  
In case of difficulty.......................................... 40  
Specifications .................................................. 42  
Before applying the power .............................. 2  
Safety precautions ............................................. 2  
Unpacking .......................................................... 3  
How to use this manual..................................... 4  
Special features ................................................. 5  
Names and functions of parts ......................... 6  
Main Unit ........................................................... 6  
Remote control unit (RC-R0725) (KRF-V7060D)  
Additional  
Information  
and (RC-R0727) (VR-6050/KRF-V6060D) ...............  
Remote control unit (RC-R0726) (KRF-V6060D)  
(For the U.K. only) ..................................................  
7
8
Setting up the system........................................ 9  
Connecting audio components........................ 10  
Connecting video components........................ 11  
Digital connections .......................................... 12  
Connecting a DVD player (6-channel input)..... 13  
Connecting the speakers ................................. 14  
Connecting the terminals ................................ 15  
Connecting to the AV AUX jacks ..................... 16  
Connecting the antennas................................. 16  
Connecting the system control ....................... 17  
Preparing the remote control .......................... 17  
Preparing for surround sound ....................... 18  
Speaker settings .............................................. 18  
Preparations  
Unpacking  
Unpack the unit carefully and make sure that all accessories are present.  
FM indoor antenna (1)  
AM loop antenna (1)  
Normal playback.............................................. 21  
Preparing for playback ..................................... 21  
Listening to a source component .................... 21  
Adjusting the sound ......................................... 22  
Recording .......................................................... 23  
Recording audio (analog sources) ................... 23  
Recording video ............................................... 23  
Recording audio (digital sources) .................... 23  
Listening to radio broadcasts ....................... 24  
Tuning (non-RDS) radio stations ...................... 24  
Using RDS (Radio Data System)  
For VR-6050/KRF-V6060D  
Remote control unit (1)  
RC-R0727  
Batteries (R6/AA) (2)  
(For the U.K. only) ............................................ 24  
Presetting radio stations manually .................. 24  
Receiving preset stations ................................ 25  
Receiving preset stations in order (P.CALL) ... 25  
Using the RDS DISP (Display) key  
Operations  
For KRF-V6060D  
(For the U.K. only)  
Remote control unit (1)  
RC-R0726  
Batteries (R6/AA) (2)  
(For the U.K. only) ................................................. 25  
Presetting RDS stations (RDS AUTO MEMORY)  
(
For the U.K. only) .............................................. 26  
Tuning by Program TYpe (PTY search)  
(For the U.K. only) ............................................ 26  
Ambience effects ............................................. 27  
Surround modes .............................................. 27  
Surround play ................................................... 29  
DVD 6-channel playback .................................. 30  
Convenient functions....................................... 30  
For KRF-V7060D  
Remote control unit (1)  
RC-R0725  
Batteries (R6/AA) (2)  
Basic remote control operations for other  
components....................................................... 33  
Registering setup codes for other  
components ..................................................... 33  
Operating other components .......................... 34  
Setup code chart  
*AC plug adaptor (2)  
*Use to adapt the plug on the power  
cord to the shape of the wall outlet.  
(Accessory only for regions where use  
is necessary.)  
(RC-R0727) (VR-6050/KRF-V6060D)  
Remote Control  
(RC-R0725) (KRF-V7060D) ............................... 35  
Setup code chart  
(RC-R0726) (KRF-V6060D)  
(For the U.K. only) ............................................ 36  
CASSETTE deck, CD player & MD recorder  
operations ........................................................ 37  
Other componentsoperations ....................... 38  
If any acccessories are missing, or if the unit is damaged or fails to  
operate, notify your dealer immediately. If the unit was shipped to you  
directly, notify your shipper immediately. Kenwood recommends that  
you retain the original carton and packing materials in case you need to  
move or ship the unit in the future.  
Keep this manual handy for future reference.  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before applying the power  
How to use this manual  
This manual is divided into four sections, Preparations, Operations,  
Remote Control, and Additional Information.  
For the U.S.A.  
FCC WARNING  
Thisequipmentmaygenerateoruseradiofrequencyenergy.Changes  
or modifications to this equipment may cause harmful interference  
unless the modifications are expressly approved in the instruction  
manual. The user could lose the authority to operate this equipment  
if an unauthorized change or modification is made.  
Preparations  
Shows you how to connect your audio and video components to the  
receiver and prepare the surround processor.  
Since this receiver works with all your audio and video components, we  
will guide you in setting up your system to be as easy as possible.  
NOTE:  
Operations  
Thisequipmenthasbeentestedandfoundtocomplywiththelimitsfor  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment may cause  
harmful interference to radio communications, if it is not installed and  
used in accordance with the instructions. However, there is no guaran-  
tee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Shows you how to operate the various functions available on the  
receiver.  
Remote Control  
Shows you how to operate other components using the remote control,  
as well as a detailed explanation of all remote control operations. Once  
youhaveregisteredyourcomponentswiththepropersetupcodes, youll  
be able to operate both this receiver and your other AV components (TV,  
VCR, DVD player, CD player, etc.) using the remote control supplied with  
this receiver.  
– – Reorient or relocate the receiving antenna.  
– – Increase the separation between the equipment and receiver.  
– – Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
Additional Information  
Shows you additional information such as In case of difficulty(trouble-  
shooting) and Specifications.  
– – Consult the dealer or an experienced radio / TV technician for help.  
For the U.S.A.  
Maintenance of the unit  
Note to CATV system installer  
When the front panel or case becomes dirty, wipe with a soft, dry  
cloth. Do not use thinner, benzine, alcohol, etc. for these agents may  
cause discoloration.  
This reminder is provided to call the CATV system installer's attention  
to Article 820-40 of the NEC that provides guidelines for proper  
grounding and, in particular, specifies that the cable ground shall be  
connected to the grounding system of the building, as close to the  
point of cable entry as practical.  
In regard to contact cleaner  
Do not use contact cleaners because it could cause a malfunction. Be  
specially careful not to use contact cleaners containing oil, for they  
may deform the plastic component.  
®
As an ENERGY STAR Partner, Kenwood Corpora-  
tion has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
This product can save energy. Saving energy re-  
duces air pollution and lowers utility bills.  
Memory back up function  
Please note that the following items will be deleted from the unit's  
memory if the power cord is disconnected from the AC outlet for  
approximately 1 day.  
Power mode.  
Input selector settings.  
Picture output.  
Speaker ON/OFF.  
Volume level.  
Distance setting.  
Input mode setting.  
Midnight mode setting.  
PRO LOGIC II mode setting.  
CS II mode setting.  
BASS, TREBLE, INPUT level. Broadcast band.  
TONE ON/OFF.  
LOUDNESS ON/OFF.  
Dimmer level.  
Frequency setting.  
Preset stations.  
Tuning mode.  
MD/TAPE settings.  
Listen mode setting.  
Speaker settings.  
SW RE-MIX ON/OFF.  
DSP mode.  
ACTIVE EQ mode.  
SPEAKER EQ mode.  
EN  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before applying the power  
Special features  
True home theater sound  
DSP surround modes  
This receiver incorporates a wide variety of surround modes to bring you  
maximum enjoyment from your video software. Select a surround mode  
according to your equipment or the software you are going to play and  
The DSP (Digital Signal Processor) used for this receiver incorporates  
a variety of high quality adjustable sound fields, like ARENA, JAZZ  
CLUB, THEATER, STADIUMand DISCO. It is compatible with  
almost any kind of program source.  
enjoy!  
Dolby Digital and Dolby Digital EX  
DVD 6-channel input  
The DOLBY DIGITAL mode lets you enjoy full digital surround from  
software processed in the Dolby Digital format. Dolby Digital provides  
up to 5.1 channels of independent digital audio for better sound quality  
and more powerful presence than conventional Dolby Surround.  
As for Dolby Digital EX, it creates six full-bandwidth output channels  
from the 5.1 channel sources. This is done using a matrix decoder that  
derives three surround channels from the two in the original recording.  
For best results, Dolby Digital EX should be used with movie sound-  
tracks recorded with Dolby Digital Surround EX.  
If you own a DVD player equipped with 6-channel output, this receiver  
allows you to obtain the full surround sound impact of DVD source  
material featuring multi-channel encoding. Since the source signals are  
digital and each channel is input independently, the resulting ambience  
is far superior to what can be achieved with conventional surround  
sound systems.  
ACTIVE EQ  
ACTIVE EQ mode will produce a more dynamic sound quality in any  
condition. You can enjoy a more impressive sound effect when ACTIVE  
EQ is turned on during Dolby Digital and DTS playback.  
Dolby PRO LOGIC II  
Dolby PRO LOGIC II, whilst totally compatible with its predecessor  
PRO LOGIC, provides greater advantages in surround sound. It allows  
the user to enjoy the conventional stereo or Dolby Surround with a  
convincing 5.1 likepresentation. PRO LOGIC II offers special fea-  
tures for controlling the overall spatial, dimensionality and frontal sound  
field imaging. PRO LOGIC II produces an impressive surround sound  
SPEAKER EQ  
TheSPEAKEREQfunctionwillautomaticallydetectthevariousfeatures  
of each speaker and effectively creates a stereoscopic sound effect.  
Universal IR (InfraRed) remote control  
from video software marked  
and three-dimensional  
In addition to the basic receiver, the remote control supplied with this  
receiver can also operate almost all of your remote controllable audio  
and video components. Just follow the simple setup procedure to  
register the components you have connected.  
spacefrommusicCD. Whenlisteningtomusic, youwillbeabletoenjoy  
the experience of sheer STEREO surround sound.  
DTS  
DTS (Digital Theater System) is a 5.1 channel digital audio format that  
providesfivefull-spectrumchannelsandonelow-frequency(subwoofer)  
channel for unprecedented clarity, optimum channel separation and a  
(wide) dynamic range.  
In the DTS mode, the 5.1 channel digital input from a DTS CD, LD or  
DVD disc (carrying the DTSmarking) can be played in Digital Sur-  
round.  
RDS (Radio Data System) tuner (For the U.K. only)  
The receiver is equipped with an RDS tuner that provides several  
convenient tuning functions: RDS Auto Memory, to automatically  
preset up to 40 RDS stations broadcasting different programs; station  
name display, to show you the name of the current broadcast station;  
and PTY search to let you tune stations by program type.  
Important:  
PTY (Program TYpe) search (For the U.K. only)  
Tune the stations by specifying the type of program you want to hear.  
When a DTS disc is played on a CD, LD or DVD player, noise may be  
output from the analog output. It is recommended that you connect the  
digital output of the player to the digital input of this unit.  
Multi channel surround sound  
(SRS Circle Surround II  
)
SRS Circle Surround II improves on its predecessor CS-5.1result-  
ing in the CS-6.1system, enabling you to listen to realistic, multi-  
channel, surround sound playback from a stereo source or conventional  
surround-encoded video source. You already enjoy listening to Dolby  
digital sound/DTS multi-channel sound with your multi-speakers. Now  
you can listen to audio CDs, MDs, Broadcast and Home Theater using  
your multi-speakers. You will discover a new type of sound through  
SRS Circle Surround II .  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                                                                    
M
                                                                                    
                                                                                      
?
                                                                                      
Names and functions of parts  
Main unit  
Speaker MUTE  
indicators indicator  
CLIP  
Input mode  
Listen mode  
indicators  
indicator indicators  
RDS indicators  
DTS DOLBY DIGITAL STEREO  
RDS  
PTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
AUTO indicator  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE  
PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMORY  
STEREO  
TUNED  
MEMORY indicator  
STEREO indicator  
TUNED indicator  
LFE  
SL  
S
SB  
SR  
Speaker selection indicators  
Input channel indicators  
Output channel indicators  
Frequency display  
Input display  
Preset channel display  
Surround mode display  
Display  
VOLUME CONTROL  
POWER  
STANDBY  
STANDBY  
DSP  
DOLBY DIGITAL  
SPEAKER EQ  
ACTIVE EQ  
DTS  
ON/STANDBY  
ON/STANDBY  
CSII  
A
SPEAKERS  
B
LOUDNESS SPEAKER EQ ACTIVE EQ  
DSP  
STEREO INPUT MODE DIMMER  
DOWN  
UP  
MUTE  
MULTI CONTROL  
LISTEN MODE  
DVD/6CH  
CD/DVD  
AUX  
TUNER  
POWER  
SOUND TONE SETUP  
BAND AUTO MEMORY  
AV AUX  
F
D
ULL DIGITAL  
G
E
C
O
D
I
N
-
ON  
OFF  
S
VIDEO  
VIDEO  
L-AUDIO-R  
PHONES  
VIDEO  
1
VIDEO  
2
VIDEO  
3
MD/TAPE  
ForVR-6050  
PHONO  
For KRF-V7060D and  
KRF-V6060D (For the U.K. only)  
1 POWER ON/OFF key  
DTS indicator  
ª
^ SOUND key  
º
(For KRF-V7060D/V6060D)  
Use to turn the main power ON/OFF.  
*
*
Lights when the receiver is in the DTS mode.  
Use to adjust the sound quality and the ambi-  
ence effects.  
CS II indicator  
ª
2 ON/STANDBY  
key  
Lights when the receiver is in the CIRCLE  
SURROUND II mode.  
& BAND key  
¢
(For KRF-V7060D/V6060D)  
Use to select the broadcast band.  
Use to turn the power ON/STANDBY when  
the POWER is turned ON.  
7 ACTIVE EQ key  
Use to select ACTIVE EQs setting.  
8 DSP key  
Use to select any of the DSP mode.  
9 STEREO key  
ª
º
* AUTO key  
Use to select the auto or manual tuning  
mode.  
( TONE key  
Use to switch the status of TONE control.  
¢
STANDBY indicator  
2 POWER ON/STANDBY  
key  
(For VR-6050)  
*
Use to turn the power ON/STANDBY.  
STANDBY indicator  
3 A SPEAKERS B keys  
Use to turn the A/B speakers ON/OFF.  
Use to switch the listen mode to STEREO.  
) MEMORY key  
¢§  
0 INPUT MODE key  
9
Use to store radio stations in the preset  
memory and to start the Auto Memory (for  
the U.K. only).  
¡
Use to switch between the full auto, digital  
and analog inputs.  
! DIMMER key  
4 LOUDNESS key  
¡ SETUP key  
*
Use to switch the status of LOUDNESS.  
Use to select the REC MODE.  
Use to adjust the brightness of the display.  
£
5 SPEAKER EQ key  
Use to select SPEAKER EQs setting.  
6 Surround indicators  
DSP indicator  
Lights when the receiver is in the DSP mode.  
SPEAKER EQ indicator  
¤
¡
Usefor selectionadjustmentsduringSOUND,  
SETUP and PRESET CHANNEL functions.  
@ VOLUME CONTROL knob  
# MUTE key  
Use to temporarily mute the sound.  
ª
£ MULTI CONTROL knob  
Use to control a variety of settings.  
¢ LISTEN MODE knob  
*
ª
$ PHONES jack  
Lights when the receiver is in the SPEAKER  
EQ mode.  
Use for headphone listening.  
% Input Selector keys  
Use to select the listening mode.  
AV AUX (S VIDEO, VIDEO, L-AUDIO-R)  
jacks  
§ AV AUX key  
¡
ACTIVE EQ indicator  
DVD/6CH,CD/DVD,AUX(forVR-6050/KRF-  
V6060D) or PHONO [for KRF-V7060D and  
KRF-V6060D (for the U.K. only)], TUNER,  
VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE  
Use to select input sources.  
^
^
Lights when the receiver is in the ACTIVE EQ  
mode.  
Use to switch the input to AV AUX.  
DOLBY DIGITAL indicator  
ª
Lights when the receiver is in the Dolby  
Digital mode.  
Standby mode  
Connection at POWER ON/OFF key (for KRF-V7060D/V6060D)  
While the standby indicator is lit, a small amount of power is supplied  
to the system to back up the memory. This is called standby mode.  
Under the condition, the system can be turned ON by remote control  
unit.  
The power in this equipment will not be completely cut off from the AC  
wall outlet when the main switch is turned OFF.  
EN  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names and functions of parts  
Remote control unit (RC-R0725) (KRF-V7060D) and (RC-R0727) (VR-6050/KRF-V6060D)  
This remote control unit can be use not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturers  
setup codes.  
^
&
*
SOURCE POWER  
DVD  
VCR  
1
CBL  
REMOTE MODE  
TV  
DSS/SAT  
OTHERS  
3
RECEIVER  
1
2
5
8
0
LISTEN MODE  
ACTIVE EQ  
(
)
4
7
6
9
2
3
SPEAKER EQ  
MUTE  
+10  
+100  
¡
INPUT MODE STEREO DSP MODE  
TV CONTROL  
4
5
¢
+
+
+
£
¢
DVD  
VOL.  
4
INPUT  
SEL  
-
CH  
-
-
VOLUME  
6
7
TOP MENU  
SET UP  
MENU  
SOUND  
P.CALL  
P.CALL  
/UP  
£
4
/DOWN  
¢
ENTER  
8
9
MULTI  
CONTROL  
OSD  
RETURN  
§
PAGE  
0
!
@
#
ª
º
TUNING  
FLIP  
BAND  
1
¡
2
6
INPUT SEL  
DISC SEL  
A/B  
AUTO  
8
DISC SKIP  
CD/DVD  
7
DIMMER  
DVD/6CH  
AUX  
TUNER  
PHONO  
VIDEO  
1
VIDEO  
2
VIDEO  
3
MD/TAPE  
If the name of a function is different on  
$
INPUT SELECTOR  
the receiver and on the remote control,  
the name of the remote control key in  
this manual is indicated in parentheses.  
¤
AV AUX  
For RC-R0725 only  
LOUDNESS  
TONE  
BASS BOOST  
%
1 REMOTE MODE keys (DVD, CBL, DSS/  
SAT, VCR, TV, OTHERS)  
! TUNING 1/¡ keys  
Use to operate the tuner mode.  
If CD, MD or TAPE is selected as the input  
source, these keys function as search keys.  
@ DISC SKIP key  
¢
¢ VOLUME +/- keys  
Use to adjust the receiver volume.  
MENU key  
Use to operate other components.  
SOUND key  
¡
Use to select the components registered at  
the respective input.  
2 Numeric keys  
º
Provide functions identical to those of the  
originalremotecontrolsuppliedwiththecom-  
ponent you are controlling.  
If CD is selected as the input source, this key  
functions as the multi-CD player disc skip  
key.  
Use to adjust the sound quality and the ambi-  
ence effects.  
§ RETURN key  
3 INPUT MODE key  
9
A/B key  
Use to operate other components.  
2 key  
Use to operate other components.  
FLIP key  
Use to switch between the full auto, digital  
and analog inputs.  
If TAPE is selected as the input source, this is  
A and B deck of a double cassette deck.  
# DISC SEL key  
4 STEREO key  
º
Use to switch the listen mode to STEREO.  
5 CH +/- keys  
Use to select the channels.  
¢DVD 4keys  
When in DVD player operations, these keys  
function as skip keys.  
6 TV CONTROL keys  
Use to operate other components.  
INPUT SEL key  
Use to operate other components.  
$ INPUT SELECTOR keys [DVD/6CH, CD/  
DVD, AUX or PHONO (for RC-R0725 only),  
TUNER, VIDEO 1, VIDEO 2, VIDEO 3, MD/  
TAPE, AV AUX]  
Use to operate other components.  
3/8key  
If CD is selected as the input source, this key  
functions as the play/pause key.  
IfMDorTAPEkeyisselectedasinputsource,  
this key functions as the play key.  
BAND key  
¢
Use when in TV operation.  
7 TOP MENU key  
Use to operate the DVD component.  
SET UP key  
Use to select the speakerssettings etc.  
8 Joystick  
ENTER  
Use to operate other components.  
MULTI CONTROL C/D  
Use to control a variety of settings.  
Use to operate other components.  
P.CALL 4/DOWN 2and P.CALL/UP ¢  
3
Use to select the input sources.  
¡
Use to select the broadcast band.  
% LOUDNESS key  
ª 7 key  
Use to switch the status of LOUDNESS.  
^ SOURCE ( ) key  
Use to turn the other components ON/OFF.  
& POWER ( ) key  
Use to turn the receiver ON/OFF.  
* RECEIVER key  
Use to return to the operation of the receiver.  
( LISTEN MODE %/keys  
Use to select the listening mode.  
) ACTIVE EQ key  
Use to select ACTIVE EQs setting.  
¡ SPEAKER EQ key  
If CD, MD, or TAPE is selected as the input  
source, this key functions as the stop key.  
AUTO key  
Use to select the auto or manual tuning  
mode.  
º DIMMER key  
Use to adjust the brightness of the display.  
8key  
Use to operate other components.  
BASS BOOST key  
Use to select the maximum adjustment set-  
ting for the low frequency range.  
¤ TONE key  
Use to switch the status of TONE control.  
*
¢
*
¤
*
ª
ª
UseforselectionadjustmentsduringSOUND,  
SET UP and PRESET channel functions.  
9 PAGE %/keys  
Use to operate the DVD component.  
0 OSD key  
Use to select SPEAKER EQs setting.  
DSP MODE key  
Use to select any of the DSP mode.  
£ MUTE key  
Use to operate the DVD component.  
Use to temporarily mute the sound.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names and functions of parts  
Remote control unit (RC-R0726) (KRF-V6060D) (For the U.K. only)  
This remote control unit can be used not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturers  
setup codes.  
^
&
*
SOURCE POWER  
DVD  
VCR  
1
CD  
REMOTE MODE  
TV  
CBL/SAT  
OTHERS  
3
RECEIVER  
1
2
5
8
0
LISTEN MODE  
ACTIVE EQ  
(
)
4
7
6
9
2
3
SPEAKER EQ  
MUTE  
+10  
+100  
¡
INPUT MODE STEREO DSP MODE  
TV CONTROL  
4
5
¢
+
+
+
£
¢
DVD  
VOL.  
4
INPUT  
SEL  
-
CH  
-
-
VOLUME  
6
7
TOP MENU  
SET UP  
MENU  
SOUND  
P.CALL  
P.CALL  
/UP  
£
4
/DOWN  
¢
ENTER  
8
9
MULTI  
CONTROL  
OSD  
RETURN  
§
PAGE DOWN PAGE UP  
PTY  
RDS DISP  
0
!
@
#
ª
º
TUNING  
FLIP  
BAND  
1
¡
2
6
INPUT SEL  
DISC SEL  
A/B  
AUTO  
8
DISC SKIP  
7
DIMMER  
DVD/6CH  
CD/DVD  
PHONO  
TUNER  
VIDEO  
1
VIDEO  
2
VIDEO  
3
MD/TAPE  
If the name of a function is different on  
$
the receiver and on the remote control,  
the name of the remote control key in  
this manual is indicated in parentheses.  
INPUT SELECTOR  
¤
AV AUX  
LOUDNESS  
TONE  
BASS BOOST  
%
1 REMOTE MODE keys (DVD, CD, CBL/SAT,  
VCR, TV, OTHERS)  
PAGE UP key  
Use to operate the DVD component.  
0 OSD key  
Use to operate the DVD component.  
! TUNING 1/¡ keys  
Use to operate the tuner mode.  
If CD, MD or TAPE is selected as the input  
source, these keys function as search keys.  
@ DISC SKIP key  
£ MUTE key  
Use to temporarily mute the sound.  
¢ VOLUME +/- keys  
Use to adjust the receiver volume.  
MENU key  
Use to operate other components.  
SOUND key  
Use to adjust the sound quality and the ambi-  
ence effects.  
§ RETURN key  
Use to operate other components.  
2 key  
Use to operate other components.  
FLIP key  
Use to select the components registered at  
the respective input.  
¡
2 Numeric keys  
¢
Provide functions identical to those of the  
originalremotecontrolsuppliedwiththecom-  
ponent you are controlling.  
º
3 INPUT MODE key  
9
Use to switch between the full auto, digital  
and analog inputs.  
If CD is selected as the input source, this key  
functions as the multi-CD player disc skip  
key.  
4 STEREO key  
º
Use to switch the listen mode to STEREO.  
5 CH +/- keys  
Use to select the channels.  
¢ DVD 4keys  
A/B key  
If TAPE is selected as the input source, this is  
A and B deck of a double cassette deck.  
# DISC SEL key  
Use to operate other components.  
3/8 key  
When in DVD player operations, these keys  
function as skip keys.  
Use to operate other components.  
INPUT SEL key  
Use to operate other components.  
$ INPUT SEL. keys [DVD/6CH, CD/DVD,  
PHONO, TUNER, VIDEO 1, VIDEO 2,  
VIDEO 3, MD/TAPE, AV AUX]  
Use to select the input sources.  
% LOUDNESS key  
Use to switch the status of LOUDNESS.  
^ SOURCE ( ) key  
If CD is selected as the input source, this key  
functions as the play/pause key.  
IfMDorTAPEkeyisselectedasinputsource,  
this key functions as the play key.  
6 TV CONTROL keys  
Use when in TV operation.  
7 TOP MENU key  
BAND key  
¢
Use to operate the DVD component.  
Use to select the broadcast band.  
ª 7 key  
SET UP key  
*
¡
Use to select the speakerssettings etc.  
If CD, MD, or TAPE is selected as the input  
source, this key functions as the stop key.  
8 Joystick  
ENTER  
AUTO key  
¢
Use to operate other components.  
MULTI CONTROL C/D  
Use to control a variety of settings.  
Use to operate other components.  
P.CALL 4/DOWN 2and P.CALL/UP ¢  
3
Use to turn the other components ON/OFF.  
Use to select the auto or manual tuning  
mode.  
*
& POWER ( ) key  
*
Use to turn the receiver ON/OFF.  
* RECEIVER key  
Use to return to the operation of the receiver.  
º DIMMER key  
¤
Use to adjust the brightness of the display.  
8key  
( LISTEN MODE %/keys  
Use to select the listening mode.  
) ACTIVE EQ key  
Use to select ACTIVE EQs setting.  
¡ SPEAKER EQ key  
Use to select SPEAKER EQs setting.  
DSP MODE key  
ª
ª
Use to operate other components.  
BASS BOOST key  
UseforselectionadjustmentsduringSOUND,  
SET UP and PRESET channel functions.  
9 RDS DISP key  
Use for RDS function.  
PAGE DOWN key  
Use to operate the DVD component.  
PTY key  
Use for PTY search.  
EN  
Use to select the maximum adjustment set-  
ting for the low frequency range.  
§
¤ TONE key  
Use to switch the status of TONE control.  
Use to select any of the DSP MODE.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the system  
Make connections as shown in the following pages.  
When connecting the related system components, be sure  
to refer to the instruction manuals supplied with the compo-  
nents you are connecting.  
Do not connect the power cord to a wall outlet until all  
connections are completed.  
Input mode settings  
CD/DVD, VIDEO 2 and DVD/6CH inputs each include jacks for digital  
audio input and analog audio input.  
The initial factory settings for audio signal playback for CD/DVD,  
DVD/6CH and VIDEO 2 are full auto.  
To use the analog audio input for playback instead (if, for example, you  
have connected a VCR to the VIDEO2 input), you must set the input  
mode for the corresponding input to the analog mode.  
After completing connections and turning on the receiver, follow the  
steps below.  
Notes  
1. Be sure to insert all connection cords securely. If their connections are  
imperfect, sound may not be produced or there will be noise inference.  
2. Be sure to remove the power cord from the AC outlet before plugging  
or unplugging any connection cords. Plugging/unplugging connection  
cords without disconnecting the power cord can cause malfunctions  
and may damage the unit.  
INPUT MODE  
3. Do not connect power cords from components whose power con-  
sumption is larger than what is indicated on the AC outlet at the rear  
of this unit.  
Analog connections  
Audio connections are made using RCA pin cords. These cables transfer  
stereo audio signal in an analogform. This means the audio signal  
corresponds to the actual audio of two channels. These cables usually  
have 2 plugs on each end, one red for the right channel and one white for  
the left channel. These cables are usually packed together with the  
source unit, or are available at your local electronics retailer.  
Input Selector  
1 Use the Input Selector keys to select CD/DVD, VIDEO 2 or  
DVD/6CH.  
2 Press the INPUT MODE key.  
Microcomputer malfunction  
Each press switches the setting as follows:  
If operation is not possible or an erroneous display appears, even  
though all connections have been made properly, reset the micro-  
computer referring to In case of difficulty.  
In DTS play mode  
1 FULL AUTO (digital input, analog input)  
2 DIGITAL MANUAL (digital input)  
CAUTION  
In CD/DVD, VIDEO 2, DVD/6CH play mode  
1 FULL AUTO (digital input, analog input)  
2 DIGITAL MANUAL (digital input)  
3 6CH INPUT (DVD/6CH input)  
Be sure to adhere to the following, or proper ventilation will be  
blocked causing damage or fire hazard.  
Do not place any objects impairing heat radiation onto the top of the  
unit.  
Leave some space around the unit (from the largest outside  
dimension including projection) equal to or greater than, shown  
below.  
4 ANALOG (analog input)  
Top panel : 50 cm  
Side panel : 10 cm Back panel : 10 cm  
Digital input:  
Select this setting to play digital signals from a DVD, CD, or LD  
player.  
Analog input:  
Select this setting to play analog signals from a cassette deck, VCR,  
or record player.  
Auto detect:  
In FULL AUTOmode (AUTO DETECT indicator light up), the  
receiver detects the digital or analog input signals automatically.  
Priority is given to digital signal during input mode selection. The  
receiver will select the input mode and listening mode automatically  
during playback to match the type of input signal (Dolby Digital,  
PCM, DTS) and the speaker setting. The OPTICAL and COAXIAL  
indicator on the display will light up when digital signal is detected.  
If the input signal is analog, the ANALOG indicator will light up.  
To keep the receiver set to the currently selected listening mode,  
use the INPUT MODE key to select DIGITAL MANUAL(manual  
sound). However, even when this setting is selected, there may be  
cases in which the listening mode is selected automatically to  
match a Dolby Digital source signal depending on the combination  
of listening mode and source signal.  
If the INPUT MODE key is pressed quickly, sound may not be  
produced. Press the INPUT MODE key again.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the system  
Connecting audio components  
Shape of AC outlets  
U.S.A. and Canada  
U.K.  
Australia  
Other countries  
SYSTEM CONTROL  
jacks  
&
To AC wall outlet  
IN  
IN  
REC OUT  
PLAY IN  
L
R
GND  
PHONO CD/DVD  
MD/TAPE  
Cassette deck or  
MD recorder  
OUT  
IN  
IN  
L
R
AUX  
OUT  
CD or DVD player  
[For VR-6050 and  
KRF-V6060D  
(except for the U.K.)]  
Moving coil (MC) cartridge  
record player cannot be used  
directly from the receiver unit.  
It can only be used when  
another equalizer amplifier is  
connected.  
OUT  
Record player  
EN  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the system  
Connecting video components  
S Video jacks  
About the S VIDEO  
jacks  
S VIDEO  
S VIDEO  
IN  
VIDEO  
S
VIDEO  
DVD  
IN  
MONITOR  
OUT  
Use the S VIDEO jacks to  
make connections to  
video components with  
S VIDEO IN/OUT jacks.  
If you use the S VIDEO  
jackstoconnectyourvideo  
playback components, be  
sure to use the S VIDEO  
jacks when connecting  
your monitor and video  
recording components.  
REC OUT  
PLAY IN  
PLAY IN  
PLAY IN  
VIDEO  
OUT  
VIDEO  
IN  
IN  
VIDEO  
VIDEO  
IN  
DVD  
IN  
MONITOR  
OUT  
VIDEO  
VIDEO 1  
VIDEO 2  
VIDEO 3  
Monitor TV  
VIDEO  
IN  
Video  
IN/OUT  
Audio  
IN/OUT  
Video inputs  
(Yellow RCA pin cords)  
Video deck  
IN  
OUT  
IN  
OUT  
Audio inputs  
and outputs  
Video inputs and outputs  
(Yellow RCA pin cords)  
OUT  
OUT  
OUT  
DVD player or LD player  
DVD player or LD player  
OUT  
A video component with digital audio outputs should be connected to the VIDEO 2 jacks.  
EN  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the system  
Digital connections  
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)  
format digital signals.  
If you have connected any digital components to the receiver, be sure to read the “Input mode settings” section carefully.  
9
COAXIAL  
OPTICAL  
CD/DVD  
VIDEO  
2
DVD/  
6CH  
DIGITAL IN  
Optical fiber OPTICAL DIGITAL OUT (AUDIO)  
cable  
CD or DVD player  
COAXIAL DIGITAL OUT (AUDIO)  
COAXIAL  
DIGITAL OUT  
(AUDIO)  
Component with DTS,  
Dolby Digital, or PCM  
COAXIAL DIGITAL OUT  
RF digital  
Connect the video signal and analog  
audio signals to the VIDEO 2 jacks.  
(See “Connecting video components”.)  
!
demodulator  
(DEM-9991D)  
(sold separately)  
DOLBY DIGITAL RF  
OUT (AUDIO)  
PCM OUT  
LD player  
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).  
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.  
Connect the video signal and analog audio signals to the VIDEO 2 jack. (See Connecting video components.)  
EN  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the system  
Connecting a DVD player (6-channel input)  
If you have connected a DVD player to the receiver with digital connection, be sure to read the “Input mode settings” section carefully.  
9
COAXIAL  
OPTICAL  
CD/DVD  
VIDEO  
OUT  
VIDEO  
IN  
IN  
VIDEO  
VIDEO  
IN  
DVD  
IN  
MONITOR  
OUT  
VIDEO  
2
VIDEO  
DVD/  
6CH  
DIGITAL IN  
S VIDEO  
S VIDEO  
IN  
VIDEO  
VIDEO  
IN  
DVD  
IN  
MONITOR  
OUT  
VIDEO  
PLAY IN  
PLAY IN  
CENTER  
FRONT  
SURROUND SUB WOOFER  
VIDEO 2  
VIDEO 3  
DVD/6CH INPUT  
VIDEO OUT  
(Yellow RCA  
pin cord)  
COAXIAL  
DIGITAL OUT  
(AUDIO)  
FRONT  
OUT L/R  
SURROUND  
OUT L/R  
CENTER  
OUT  
DVD player  
SUBWOOFER  
OUT  
S VIDEO  
OUT  
S VIDEO cord  
EN  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the system  
Connecting the speakers  
Front Speakers A  
Right  
Left  
Powered  
subwoofer  
Center  
Speaker  
SPEAKERS (8-16  
)
FRONT A  
CENTER  
GREEN  
RED  
WHITE  
R
+
-
R
L
R
SUB WOOFER  
SURROUND  
R
GRAY  
BLUE  
L
SURROUND BACK  
PRE OUT  
+
- -  
+
+
- -  
+
R
L
FRONT B  
Right  
Left  
Power amplifier  
Surround  
Back  
Surround Speakers  
(Be sure to connect both  
surround speakers)  
Use the FRONT SPEAKERS B  
terminals if you want to connect  
a second front speaker system.  
EN  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the system  
Connecting the terminals  
Speaker placement  
1 Strip coating.  
2 Loosen.  
Center speaker  
Subwoofer  
3 Insert.  
4 Secure.  
Front speakers  
(L,R)  
Listening  
position  
Surround  
speakers  
(L,R)  
Surround  
back speaker  
1 Strip coating.  
2 Push the lever.  
Front speakers : Place at the front left and right of the listening  
position. Front speakers are required for all surround modes.  
Center speaker : Place front and center. This speaker stabilizes the  
sound image and helps recreate sound motion. Required for surround  
playback.  
Surround speakers : Place at the direct left and right, or slightly  
behind, the listening position at even heights, approximately 1 meter  
above the ears of the listeners. These speakers recreate sound  
motion and atmosphere. Required for surround playback.  
Subwoofer : Reproduces powerful deep bass sounds.  
Surround back speaker : Place the speaker directly at the rear of the  
listening position. The optimum position depends mainly on the room  
condition.  
3 Insert the cord.  
4 Return the lever.  
Although the ideal surround system consists of all the speakers  
listed above, if you don't have a center speaker or a subwoofer, you  
can divide those signals between the available speakers in the  
speaker settings steps to obtain the best possible surround repro-  
Connection of banana plugs (For the U.S.A. and Canada)  
1 Secure.  
2 Insert.  
duction from the speakers you have available.  
*
Channel space switching  
(Except for the U.S.A., Canada, U.K., and Australia)  
Sound will not be heard if the speaker terminal is not fully secured.  
The space between radio channels has been set to the one that  
prevails in the area to which the system is shipped. However, if the  
current channel space setting does not match the setting in the area  
where the system is to be used, for instance when you move from  
area 1 or area 2 shown in the following table or vice versa, proper  
reception of AM/FM broadcasts cannot be expected. In this case,  
change the channel space setting in accordance with your area by  
referring to the following table.  
Never short circuit the + and speaker cords.  
If the left and right speakers are connected inversely or the speaker  
cords are connected with reversed polarity, the sound will be  
unnaturalwithambiguousacousticimaging. Besuretoconnectthe  
speakers correctly.  
Speaker impedance  
CHANNEL  
After confirming the speaker impedance indications printed on the  
rear panel of the receiver, connect speakers with matching imped-  
ance ratings. Using speakers with a rated impedance other than that  
indicated on the rear panel of the receiver could result in malfunctions  
or damage to the speakers or receiver.  
Area  
Space Frequency  
U.S.A., Canada and South  
American countries  
FM: 100 kHz  
AM: 10 kHz  
1
2
FM: 50 kHz  
AM: 9 kHz  
Other countries  
75us  
50us  
75us  
50us  
AM 9kHz  
FM50kHz  
AM 10kHz  
FM100kHz  
AM 10kHz  
FM100kHz  
AM 9kHz  
FM50kHz  
DE-EMPHASIS  
CHANNEL SPACE  
DE-EMPHASIS  
CHANNEL SPACE  
Turn the power OFF by pressing the POWER key before moving the  
switch level. Move switch lever to match your area with a small  
screwdriver or other pointed tool, then turn the power on again.  
EN  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the system  
Connecting to the AV AUX jacks  
Connecting the antennas  
The AV AUX jacks are convenient for connection of video components  
such as a camcorder or a video game.  
AM loop antenna  
The supplied loop antenna is for use indoors. Place it as far as possible  
from the receiver, TV set, speaker cords and power cord, and adjust the  
direction for best reception.  
AV AUX  
AM antenna terminal connections  
1 Push lever.  
2 Insert cord.  
3 Release lever.  
FM indoor antenna  
The supplied indoor antenna is for temporary use only. For stable signal  
reception we recommend using an outdoor antenna. Disconnect the  
indoor antenna when you connect one outdoors.  
S VIDEO  
VIDEO  
L-AUDIO-R  
FM antenna terminal connections  
Insert cord.  
S VIDEO cord  
FM outdoor antenna  
Leadthe75coaxialcableconnectedtotheFMoutdoorantennaintothe  
room and connect it to the FM 75terminal.  
VIDEO OUT  
Attach to the stand  
Camcorder, other VCR,  
video game, digital camera,  
or portable MD player  
ANTENNA  
S VIDEO OUT  
AUDIO OUT  
AM  
AM loop antenna  
GND  
FM indoor antenna  
75  
FM  
FM outdoor antenna  
Use an antenna  
adaptor  
(Commercially  
available)  
To select the source connected to the AV AUX jacks press AV  
AUX key.  
When you connect the audio source such as the MD player, you  
do not need to connect the video cable.  
¡
When you connect the unit and the component with the S  
VIDEO cord, you can get better picture quality.  
EN  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the system  
Connecting the system control  
Preparing the remote control  
Connecting system control cords after connecting a KENWOOD  
audio component system lets you take advantage of convenient  
system control operations.  
Loading the batteries  
1 Remove the cover.  
2 Insert the batteries.  
This unit is compatible only with the [SL-16] mode. The system  
control operation is not available if the unit is connected in the  
[XS8], [XS], or [XR] connection mode.  
If your component has the mode select switch, set the connected  
components to the [SL16] mode.  
3 Close the cover.  
SYSTEM CONTROL  
SYSTEM CONTROL  
cord  
Youmayconnectthesystemcontrolcordtoeithertheupordownjack.  
EXAMPLE: [SL16] mode connections  
Theunderlinedportionrepresentsthesettingofthesystemcontrolmode.  
Insert two AA-size (R6) batteries as indicated by the polarity markings.  
[SL16]  
Receiver  
SYSTEM  
CONTROL  
cord  
Cassette deck  
or MD recorder  
[SL16] [XS] [XS8] [XR]  
[SL16] [XS] [XS8]  
[XS]  
Operation  
When the STANDBY indicator is lit, the power turns ON when you press  
the POWER key on the remote control. When the power comes ON,  
press the key you want to operate.  
CD player  
Record player  
Operating range  
(Approx.)  
Remote sensor  
In order to take advantage of the system control operations, the  
components must be connected to the correct jacks. To use a CD  
player it must be connected to the CD jacks. To use a cassette deck  
(or MD recorder) it must be connected to the MD/TAPE jacks. When  
using more than one CD player (etc.) only the one connected to the  
specified jacks may be connected for system control.  
6 m  
Some CD players and cassette decks are not compatible with the  
[SL16] system control mode. Do not make system connections with  
equipment that is not [SL16] compatible.  
Some MD players are not system control compatible. You cannot  
make system control connections to this kind of equipment.  
POWER  
Notes  
1. [SL16] equipment cannot be combined with [XR], [XS], and [XS8]  
equipment for system operations. If your equipment consists of  
this kind of combination, please do not connect any system con-  
trol cords. Even without system control cords, normal operations  
can be carried out without effecting performance.  
2. Do not connect system control cords to any components other  
than those specified by KENWOOD. It may cause a malfunction  
and damage your equipment.  
Infrared ray system  
When pressing more than one remote control key successively, press  
the keys securely by leaving an interval of 1 second or more between  
keys.  
3. Be sure the system control plugs are inserted all the way in to the  
system control terminals.  
Notes  
SYSTEM CONTROL OPERATIONS  
1. The supplied batteries may have shorter lives than ordinary batteries  
due to use during operation checks.  
2. When the remote-controllable distance gets shorter than before, re-  
place both batteries with new ones.  
Remote Control  
Lets you operate this unit with the system remote supplied with the  
receiver.  
3. Placing the remote sensor in direct sunlight, or in direct light from a  
high frequency fluorescent lamp may cause a malfunction.  
In such a case, change the location of the system installation to pre-  
vent malfunction.  
Automatic Operation  
When you start playback from a source component, the input selector  
on this unit switches to that component automatically.  
Synchronized Recording  
Lets you synchronize recording with the start of playback when  
recording from CD, MD or analog discs.  
Registering setup codes for KENWOOD audio components  
If you own remote controllable KENWOOD audio components that  
are not compatible with system control, registering the setup code  
enables you to control those components using the remote control  
supplied with this unit (without connecting system control cords). To  
register setup codes for your remote controllable KENWOOD audio  
components, see Registering setup codes for other components.  
EN  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing for surround sound  
Speaker settings  
To enable you to obtain optimum enjoyment from the receivers listening  
modes, make sure to complete the speaker settings (subwoofer, front,  
center, and surround speakers) as described below.  
2 Use the MULTI CONTROL knob or Joystick (5/) to select  
the appropriate subwoofer setting.  
1 SUBW ON : Subwoofer setting mode to the receiver is  
ON.  
POWER  
2 SUBW OFF : Subwoofer setting mode to the receiver is  
ON/STANDBY  
OFF.  
(VR-6050)  
ON/STANDBY  
(KRF-V7060D/V6060D)  
/
The initial setting is SUBW ON.  
SETUP MULTI CONTROL  
When the setting SUBW OFFis selected, the front speakers  
are automatically set to FRNT LARGEand the procedure skips  
to step 6.  
Before step 6, press the SETUP key to accept the setting.  
When subwoofer output sound is required, select FRNT  
NORMALor select both FRNT LARGEand SW RE-MIX ON.  
M
3 Press the  
key or Joystick (3) to accept the setting.  
The front speakers setting indication FRNTappears.  
POWER ON/OFF  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
(KRF-V7060D/V6060D)  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
POWER  
Joystick  
SL  
S
SB  
SR  
4 Use the MULTI CONTROL knob or Joystick (5/) to select  
SET UP  
the appropriate front speakers setting.  
1 FRNT LARGE  
:
:
Large front speakers are connected  
to the receiver.  
Average size front speakers are con-  
nected to the receiver.  
(MULTI CONTROL5/,  
DOWN2 / UP3)  
2 FRNT NORMAL  
For FRNT LARGEselection, no sound will be heard from  
subwoofer speaker even when it is set to ON. However, if you  
select SW RE-MIX ONwhen subwoofer is selected, you will  
be able to hear sound from the subwoofer.  
When in STEREO mode, the sound goes directly to front  
speaker.  
1Turn on the power to this receiver by pressing the POWER  
ON/STANDBY (for VR-6050) or POWER ON/OFF and ON/  
STANDBY (KRF-V7060D/V6060D) or POWER key.  
M
5 Press the key or Joystick (3) to accept the setting.  
2Press the SETUP key to enter the SET UP mode and press  
M
The center speaker setting indication CNTRappears.  
?
/
keys or Joystick (2/ 3) for the following displays.  
6 Use the MULTI CONTROL knob or Joystick (5/) to select  
the appropriate center speaker setting.  
1 SP SETUP  
2 TEST TONE  
3 SP DISTANCE  
4 DISP MODE  
5 EXIT  
If you selected LARGEas the front speakers setting,  
1 CNTR LARGE  
2 CNTR NORMAL  
3 CNTR OFF  
:
:
:
A large center speaker is connected  
to the receiver.  
An average size center speaker is  
connected to the receiver.  
Center speaker setting mode to the  
receiver is OFF.  
The flow of the SET UP is as follows:  
SP SETUP  
Subwoofer  
Front  
TEST TONE  
SP DISTANCE  
Front Left  
DISP MODE  
Display Selector  
Display Listen  
EXIT  
T. TONE T. TONE  
AUTO MANUAL  
If you selected NORMALas the front speakers setting,  
Center  
1 CNTR ON  
2 CNTR OFF  
:
:
Center speaker setting mode to the re-  
ceiver is ON.  
Center speaker setting mode to the re-  
ceiver is OFF.  
L
C
L
C
R
SR  
SB  
SL  
SW  
Center  
Front Right  
Surround  
Surround Right  
Surround Back  
Surround Left  
Subwoofer  
Surround  
Back  
R
SR  
SB  
SL  
SW  
Surround  
Mix  
M
7 Press the key or Joystick (3) again to accept the setting.  
The surround speaker setting indication SURRappears.  
Subwoofer  
Re-mix  
8 Use the MULTI CONTROL knob or Joystick (5/) to select  
the appropriate surround speaker setting.  
If you selected LARGEas the center speaker setting,  
3Select a speaker system.  
1 Select the SP SETUP and press the SETUP key again so  
that the subwoofer setting indication SUBW ONappears.  
1 SURR LARGE  
:
Large surround speakers are con-  
nected to the receiver.  
2 SURR NORMAL : Average size surround speakers are  
connected to the receiver.  
3 SURR OFF  
:
Surround speaker setting mode to  
the receiver is OFF.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
S
SB  
SR  
EN  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing for surround sound  
If you selected other than “LARGE” as the center speaker  
setting,  
Adjust the speaker volume level.  
4
From your usual listening position, adjust the volume levels. The  
volume levels from each speaker should be the same.  
1 SURR ON  
2 SURR OFF  
:
:
Surround speaker setting mode to the re-  
ceiver is ON.  
Surround speaker setting mode to the re-  
ceiver is OFF.  
M
?
1 Press the  
/
keys or Joystick (2/3) to select TEST TONE.  
2 Press the SETUP key for the following displays:  
• When the setting “SURR OFF” is selected, the procedure skips  
1 T.TONE AUTO  
2 T.TONE MANUAL  
to step #.  
3 The selection of AUTO/MANUAL TEST TONE is done by the  
MULTI CONTROL knob or Joystick (5/).  
Press the SETUP key again to begin TEST TONE.  
M
9 Press the  
key or Joystick (3) again to accept the setting.  
• The surround speaker setting indication “SB” appears.  
0 Use the MULTI CONTROL knob or Joystick (5/) to select  
appropriate surround back speaker setting.  
Use the MULTI CONTROL knob or Joystick (5/) to adjust  
the volume level of the test tone output from the speaker  
channel to be adjusted.  
If you selected “LARGE” as the surround speaker setting,  
For AUTO selection, the first test tone is heard from the front  
left speaker for 2.5 seconds. The next test tone is heard from  
the speakers in the following sequence for 2 seconds each.  
1 SB NORMAL : Average size surround back speaker is  
connected to the receiver.  
: Largesurroundbackspeakerisconnected  
to the receiver.  
: Surround back speaker setting mode to  
the receiver is OFF.  
2 SB LARGE  
3 SB OFF  
LEFT  
SUBW  
The channel indication blinks while the test tone is being output.  
CNTR  
RIGHT  
SL  
SB  
SR  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
CLIP  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
L
C
SW  
R
AUTO  
MEMO  
AUTO  
MEMO  
LFE  
LFE  
STEREO  
TUNED  
STEREO  
TUNED  
SL  
S
SB  
SR  
SL  
S
SB  
SR  
• If you change the volume level settings for the speakers while  
listening to music, the settings referred to on this page are also  
If you selected “NORMAL” as the surround speaker setting,  
1 SB ON  
:
Surround back speaker setting mode to the  
receiver is ON.  
changed.  
º
• IfthespeakersettingselectsareOFF, thespeakerlevelsettings  
are reset.  
2 SB OFF : Surround back speaker setting mode to the  
receiver is OFF.  
M
?
/
For MANUAL selection, press the  
keys or Joystick (2/3)  
each time to select the speaker channel.  
M
! Press the  
key or Joystick (3) again to accept the setting  
and “SURR:MIX” appears.  
4 Press the SETUP key again.  
• The test tone is turned off and return to the main setup displays.  
• Surr:mix is when the SL and SR speakers signals are mixed to  
produce sound from the surround back speaker which would  
enable the listener to enjoy sound coming from the back.  
5Input the distance to the speakers.  
M
/
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
CLIP  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
?
1 Press the  
keys or Joystick (2/3) to select the SP  
L
C
SW  
R
AUTO  
MEMO  
LFE  
DISTANCE on setup displays and press the SETUP key again.  
STEREO  
TUNED  
SL  
S
SB  
SR  
2 Measure the distance from the listening position to each of  
the speakers.  
@ Use the MULTI CONTROL knob or Joystick (5/) to select  
the following.  
Jot down the distance to each of the speakers.  
Distance to Front left speaker (L) : ____ feet (meters)  
Distance to Center speaker (C)  
Distance to Front right speaker (R) : ____ feet (meters)  
Distance to Surround right (SR)  
Distance to Surround back (SB)  
Distance to Surround left (SL)  
Distance to Subwoofer (SW)  
: ____ feet (meters)  
1 SURR:MIX ON  
:
Surround mix setting mode to the  
receiver is ON.  
: ____ feet (meters)  
: ____ feet (meters)  
: ____ feet (meters)  
: ____ feet (meters)  
2 SURR:MIX OFF : Surround mix setting mode to the  
receiver is OFF.  
• If surround back speaker is turned OFF, SURR:MIX setting is not  
visible and the procedure skips to step #.  
M
?
3 Use the  
/
keys or Joystick (2/3) to select the speakers  
M
# Press the  
key or Joystick (3) again to accept the setting.  
and the MULTI CONTROL knob or Joystick (5/) to adjust  
the distance to the front speakers.  
• Thesubwooferre-mixsettingindicationSWRE-MIXappears.  
The speaker indicator to be adjusted blinks.  
$ Use the MULTI CONTROL knob or Joystick (5/) to select  
the appropriate subwoofer re-mix setting.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
1 SW RE-MIX ON : Subwoofer re-mix setting mode to  
the receiver is ON.  
STEREO  
TUNED  
SL  
S
SB  
SR  
2 SW RE-MIX OFF : Subwoofer re-mix setting mode to  
the receiver is OFF.  
• If subwoofer is turned OFF, subwoofer re-mix setting is not  
visible.  
Indication in feet  
Indication in meters  
• The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),  
adjustable in 1 foot (0.3 m) increments.  
% Press the SETUP key again to return to the main setup  
displays.  
4 Repeatsteps 3toinputthedistanceforeachofthespeakers.  
• The receiver enters the speaker volume level adjustment mode.  
• In steps 4 and 5, indications appear only for the selected  
channels of the speakers that require adjusting.  
Continued to next page  
EN  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing for surround sound  
5 Press the SETUP key again to return to main setup displays.  
The speakers you have selected should appear on the display.  
Confirm that all the speakers have been correctly selected.  
Input level adjustment (analog sources only)  
If the input level of an analog source signal is too high, the CLIP indicator  
will blink to indicate the source signal. Adjust the input level.  
6Select the display mode.  
M
CINEM  
ACTIV  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
A
B
CLIP  
OAXIAL  
ANALOG  
DSP  
M
L
C
SW  
R
?
1 Press the  
/
keys or Joystick (2/3) to select the DISP  
LFE  
MODE.  
SL  
S
SB  
SR  
2 Press the SETUP key for the following displays:  
1 Use the Input Selector keys to select the source of which the  
1 DISP SELECTOR  
2 DISP LISTEN  
:
:
Displays the current input selector.  
Displays the current listen mode.  
input level you want to adjust.  
You can store a separate input level for each input source.  
3 Use the MULTI CONTROL knob or Joystick (5/) to select  
the display mode.  
M
?
2 Press the SOUND and  
/
keys or Joystick (2/3) repeatedly  
until the INPUTindication appears.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
3
Use the MULTI CONTROL knob or Joystick (5/) to adjust the  
input level.  
STEREO  
TUNED  
SL  
S
SB  
SR  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
4 Press the SETUP key again to accept the setting.  
STEREO  
TUNED  
SL  
S
SB  
SR  
M
5 Use the  
key or Joystick (3) to select EXIT.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
The adjustment mode is displayed for approximately 8 seconds.  
The input level may be adjusted to any one of three settings:  
0dB, -3dB, and -6dB. (The initial setting is 0dB.)  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
4 Press the SOUND key again to return to the input indication.  
6 Press the SETUP key to exit the SET UP mode.  
EN  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Normal playback  
Listening to a source component  
Preparing for playback  
Some preparatory steps are needed before starting playback.  
VOLUME CONTROL  
POWER  
ON/STANDBY  
(VR-6050)  
ON/STANDBY  
(KRF-V7060D/V6060D)  
A SPEAKERS B  
INPUT MODE  
Input Selector  
AV AUX  
POWER ON/OFF  
MD/TAPE  
(KRF-V7060D/V6060D)  
VOLUME  
/
Turning on the receiver  
1 Turn on the power to the related components.  
INPUT SELECTOR  
2 Turn on the power to this receiver by pressing the POWER  
ON/STANDBY (for VR-6050) key or POWER ON/OFF and  
ON/STANDBY (for KRF-V7060D/V6060D) key.  
Use the Input Selector and AV AUX keys to select the  
source you want to listen to.  
Selecting the input mode  
1
If you have selected a component connected to the CD/DVD, VIDEO 2  
or DVD/6CH jacks, make sure that the input mode setting is correct for  
the type of audio signal to be used.  
Selecting a source using each key.  
9
VR-6050/KRF-V7060D/V6060D  
1 DVD/6CH”  
2 CD/DVD”  
Selecting MD/TAPE  
3 AUXor PHONO(for KRF-V7060D only)  
4 TUNER”  
5 VIDEO 1”  
Select the source name corresponding to the component connected to  
the MD/TAPE jacks. The initial factory setting is TAPE. To change the  
source to MD, follow the steps below:  
6 VIDEO 2”  
7 VIDEO 3”  
8 MD/TAPE”  
9 AV AUX”  
Hold down the MD/TAPE key for more than 2 seconds.  
The source indication changes to MD.  
To return to the original indication, repeat the above procedure.  
KRF-V6060D (for the U.K. only)  
1 DVD/6CH”  
2 CD/DVD”  
3 PHONO”  
4 TUNER”  
5 VIDEO 1”  
6 VIDEO 2”  
7 VIDEO 3”  
8 MD/TAPE”  
9 AV AUX”  
Selecting the speaker system  
Press the A SPEAKERS B key to select the speaker system to be  
used.  
A ON  
B ON  
:
:
Sound from the speakers connected to the SPEAKERS A  
terminals on the rear panel.  
Sound from the speakers connected to the SPEAKERS B  
terminals on the rear panel. No sound will be heard from  
the subwoofer.  
A+B ON  
:
Sound from both the speakers connected to the  
SPEAKERS A and B terminals on the rear panel.  
2Start playback from the selected source.  
A+B OFF : No sound from the speakers. Use this setting when  
listening with headphones for stereo sound in all playback  
modes. The display segments are different depending on  
the type of input signal.  
Use the VOLUME CONTROL knob or VOLUME +/  
adjust the volume.  
-
keys to  
3
The indicator for the speakers  
you want to use should be lit.  
CINEM  
ACTIV  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP  
M
L
C
SW  
R
LFE  
SL  
S
SB  
SR  
Selecting 6CH INPUTby pressing the INPUT MODE key, whereby  
DVD/6CHis the input source will cause SPEAKERS A to be selected  
automatically.  
EN  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Normal playback  
Adjusting the sound  
Muting the sound  
SPEAKER EQ ACTIVE EQ  
A SPEAKERS B  
TONE MULTI CONTROL  
The MUTE key lets you mute the sound of the speakers.  
Press the MUTE key.  
CINEMA EQ.  
ACTIVE EQ.  
DSP MODE  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
A
B
CLIP  
COAXIAL  
ANALOG  
D
L
C
SW  
R
LFE  
SL  
S
SB  
SR  
Blinks  
MUTE VOLUME  
CONTROL  
PHONES LOUDNESS  
To cancel  
Press the MUTE key again so that the MUTEindicator goes off.  
MUTE ON can also be deactivated by turning the VOLUME  
CONTROL knob or pressing VOLUME +/keys.  
POWER  
ACTIVE EQ  
SPEAKER EQ  
ACTIVE EQ mode  
MUTE  
VOLUME  
/
You can enjoy a more impressive sound effect when ACTIVE EQ is  
turned ON during Dolby Digital and DTS playback and, when in PCM and  
analog stereo mode.  
Joystick  
(MULTI CONTROL5/,  
DOWN2 / UP3)  
Press the ACTIVE EQ key for the following selections;  
LOUDNESS  
TONE  
1 ACTIVE EQ MUSIC : Effective when listening to music.  
(The ACTIVE EQ indicator lights up.)  
BASS BOOST  
2 ACTIVE EQ CINEMA : Effective when watching a movie.  
(The ACTIVE EQ indicator lights up.)  
3 ACTIVE EQ TV  
: Effective when watching TV.  
Adjusting the TONE  
(The ACTIVE EQ indicator lights up.)  
: The ACTIVE EQ function is turned OFF.  
(The ACTIVE EQ indicator goes off.)  
4 ACTIVE EQ OFF  
You can adjust the sound quality when the receiver is in the PCM stereo  
and analog stereo mode.  
ACTIVE EQwill scroll from right to left.  
1 Press the TONE key to select the TONE mode.  
When ACTIVE EQ and SPEAKER EQ are OFF and ACTIVE EQ  
(MUSIC) is turned ON, SPEAKER EQ (SMALL) will turn ON  
automatically.  
ACTIVE EQ function will not be available when REC MODE, AUTO  
TUNINGorPRESETMEMORYisON,andduring96kHzLPCMplayback.  
2 Use the MULTI CONTROL knob or Joystick (5/) to select TONE  
ON/OFF.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
S
SB  
SR  
SPEAKER EQ mode  
SPEAKER EQs function will automatically detect the various features of  
each speaker and effectively creates a stereoscopic sound effect.  
3 WheninTONEONselection, presstheTONEkeyforthefollowing  
displays.  
Press the SPEAKER EQ key to switch the following setting;  
BASS  
:
Select this to adjust the low frequency range.  
TREBLE : Select this to adjust the high frequency range.  
1 SPEAKER EQ SMALL : To select a small size speaker.  
(TheSPEAKEREQindicatorlightsup.)  
2 SPEAKER EQ NORMAL : To select an average size speaker.  
(TheSPEAKEREQindicatorlightsup.)  
4 Use the MULTI CONTROL knob or Joystick (5/) to adjust the  
sound quality.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
3 SPEAKER EQ LARGE  
: To select a large size speaker.  
(TheSPEAKEREQindicatorlightsup.)  
: The SPEAKER EQ function is turned  
OFF.  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
4 SPEAKER EQ OFF  
STEREO  
TUNED  
SL  
S
SB  
SR  
(TheSPEAKEREQindicatorgoesoff.)  
SPEAKER EQwill scroll from right to left.  
The bass and treble levels are adjustable from -10 to +10 in 2 step  
increments.  
The adjustment item is displayed for approximately 8 seconds.  
SPEAKER EQ cannot be turned OFF when ACTIVE EQ is turned ON.  
SPEAKER EQ function will not be available when REC MODE, AUTO  
TUNINGorPRESETMEMORYisON,andduring96kHzLPCMplayback.  
Once-touch low frequency emphasis (BASS BOOST)  
(remote control only)  
Listening with headphones  
1
Press the A and B Speaker keys so that the speaker indicator  
goes off.  
You can adjust the sound quality when the receiver is in the PCM stereo  
and analog stereo modes.  
Make sure the SPEAKERS  
indicators are turned off.  
Press the BASS BOOST key.  
Press the key once to select the maximum (+10) low frequency  
emphasis setting.  
CINEMA EQ.  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
ACTIVE EQ.  
DSP MODE  
A
B
CLIP  
COAXIAL  
ANALOG  
D
This key does not function when the receiver is in the sound quality  
or ambience effects adjustment mode.  
LFE  
SL  
S
SB  
SR  
Switching back to the previous setting  
Ifyouturnoffallofthespeakerswheninsurroundmode,thesurround  
mode will be canceled as well, resulting in stereo playback.  
Press the BASS BOOST key again.  
2 Connect headphones to the PHONES jack.  
Adjusting the LOUDNESS mode  
PHONES  
You can adjust the Loudness function which controls the low volume  
settings to maintain the music's richness. The adjustment can be made  
when the receiver is in the PCM stereo and analog stereo mode.  
Press the LOUDNESS key to turn the LOUDNESS setting ON.  
To cancel  
3 Use the VOLUME CONTROL knob or VOLUME +/ keys to adjust  
Press the LOUDNESS key again so that the LOUDNESSindicator  
goes off.  
the volume.  
EN  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Recording audio (analog sources)  
3 Press and hold the DIMMER key for more than 2 seconds to  
select the AUTO REC or MANUAL REC mode.  
1 REC MODE off  
:
:
The digital input record mode is  
switched off.  
The digital input signals (DTS, Dolby  
Digital, or PCM) are identified auto-  
matically and converted into stereo  
signals that are ready for recording.  
2 AUTO REC mode  
3 MANUAL REC mode : The input signal type at the moment  
thismodeisselectedisheldthrough-  
out this mode.  
MD/TAPE  
Recording a music source  
For AUTO REC mode :  
1 Use the Input Selector keys to select the source (other than MD/  
TAPE) you want to record.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
MATRIX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
2 Set the MD or TAPE recorder to record.  
3 Start playback, then start recording.  
SL  
S
SB  
SR  
CINEMA EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
ACTIVE EQ.  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
Recording video  
1 Use the Input Selector keys to select the video source (other than  
VIDEO 1) you want to record.  
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
S
SB  
SR  
2 Set the video deck connected to VIDEO 1 to record.  
Select the REC MODE to record a digital input source.  
For MANUAL REC mode :  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
MATRIX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
3 Start playback, then start recording.  
Recording may not be normal for some video software. This is due  
STEREO  
TUNED  
SL  
S
SB  
SR  
to the copy guard condition.  
CINEMA EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
Recording audio (digital sources)  
ACTIVE EQ.  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
Switch on the REC MODE to record a digital input source.  
STEREO  
TUNED  
SL  
S
SB  
SR  
Usually use the AUTO REC MODE to record audio input sources. When  
the digital mode changes during recording in the AUTO REC MODE, the  
audio input source may be interrupted momentarily.  
4 Start playback, then start recording.  
If the audio reproduction stops in the middle due to change in the  
input signals, etc., press the DIMMER key.  
Recording music in AUTO REC or MANUAL REC mode  
DIMMER  
Input Selector  
1 Use the Input Selector keys to select the source (CD/DVD,  
DVD/6CH, VIDEO 2) you want to record.  
2 Set the MD or TAPE recorder to record.  
EN  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to radio broadcasts  
The receiver can store up to 40 stations in the memory and recall them  
by one-touch operation.  
Radio stations can be classified into RDS (Radio Data System) stations  
and other stations. To listen to or store RDS stations in the preset  
memory see Using RDS (Radio Data System). (For the U.K. only)  
(For the U.K. only)  
Using RDS (Radio Data System)  
RDS is a system that transmits useful information (in the form of digital  
data) for FM broadcasts along with the broadcast signal. Tuners and  
receivers designed for RDS reception can extract the information from  
the broadcast signal for use with various functions, such as automatic  
display of the station name.  
Tuning (non-RDS) radio stations  
MULTI CONTROL  
BAND  
RDS functions:  
PTY (Program TYpe Identification) Search  
§
Automatically tunes to a station that is currently broadcasting the  
specified program type (genre).  
PS (Program Service Name) Display  
Automatically displays the station name transmitted by the RDS  
station.  
TUNER AUTO  
RDS AUTO MEMORY function  
§
Automatically selects and stores up to 40 RDS stations in the preset  
memory.  
If fewer than 40 RDS stations have been stored in the preset memory,  
regular FM stations will be stored in the remaining places.  
Radio Text function  
Displays the radio text data transmitted by some RDS stations when  
you press the RDS DISP (display) key. There is NO RTif no text  
data is transmitted.  
The RDSindicator lights up when an RDS broadcast (signal) is  
received.  
Joystick  
TUNING 1/¡  
AUTO  
(MULTI CONTROL5/)  
BAND  
TUNER  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
TY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
S
SB  
SR  
Use the TUNER key to select the tuner.  
1
Note  
2Use the BAND key to select the desired broadcast band.  
Each press switches the band.  
Some functions and function names may differ for certain countries  
and areas.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
Before using a function utilizing the RDS, be sure to perform the RDS  
AUTO  
MEMO  
LFE  
Auto Memory operation by referring to the description in Presetting  
STEREO  
TUNED  
SL  
S
SB  
SR  
RDS stations (RDS AUTO MEMORY).  
§
3Use the AUTO key to select the desired tuning method.  
Each press switches the tuning method to either auto or manual  
tuning.  
Presetting radio stations manually  
The RDS auto memory function assigns preset numbers to RDS stations  
starting from preset number 1. Therefore, be sure to execute the RDS  
auto memory function before using the following operations to manually  
store AM stations and other FM stations, and RDS stations. See  
Presetting RDS stations (RDS AUTO MEMORY). (For the U.K. only)  
§
AUTO” indicator lights up in the display.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
ICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
XIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
AUTO  
MO  
STEREO  
TUNED  
MULTI CONTROL  
Normally, set to AUTO(auto tuning). If the radio waves are weak  
and there is a lot of interference, switch to manual tuning. (With  
manual tuning, stereo broadcasts will be received in monaural.)  
Use the MULTI CONTROL knob or Joystick (5/), or TUNING  
1 / ¡ keys to select the station.  
4
STEREOlights when a broadcast is being received in stereo.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
CAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
XIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
TUNER MEMORY  
AUTO  
MEMO  
STEREO  
TUNED  
1Tune to the station you want to store.  
2Press the MEMORY key while receiving the station.  
TUNED” is displayed when a station is received.  
Auto tuning The next station is tuned automatically.  
Blinks for 5 seconds  
Lights for 5 seconds  
:
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
Manual tuning : Turn the knob or use the Joystick (5/) to  
AUTO DETECT  
THX  
MATRIX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
96kHzfs  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
select the desired station.  
AUTO  
MEMORY  
STEREO  
TUNED  
LFE  
SL  
S
SB  
SR  
EN  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to radio broadcasts  
Use the Joystick to adjust the P.CALL 4/ ¢ direction to  
select the desired station.  
2
Proceed to step 3 within 5 seconds.  
(If more than 5 seconds elapse, press the MEMORY key again).  
Each time you push the Joystick, another preset station is received  
in order.  
Use the MULTI CONTROL knob or Joystick (5/) to select  
one of the station presets (1 – 40).  
3
Pushing the Joystick to P.CALL ¢ does the following:  
Pushing the Joystick to P.CALL 4 does the following:  
4Press the MEMORY key again to confirm the setting.  
Repeat steps 1, 2, 3, and 4 to store as many stations as  
necessary.  
If you store a station at a previously used preset, the old station will  
be replaced by the new one.  
Holding the Joystick on ¢ or 4 direction, lets you skip  
through the presets, receiving each preset station at 0.5 second  
intervals.  
Receiving preset stations  
(For the U.K. only)  
Using the RDS DISP (Display) key  
Numeric keys  
TUNER  
1Press the TUNER key to select tuner as the source.  
RDS DISP  
TUNER  
Enter the number of the preset station you want to receive  
2
(up to “40”).  
Press the numeric keys in the following order:  
For 15, press  
For 20, press  
0,5  
0,0,)  
Pressing the RDS DISP key changes the contents of the  
display.  
If you make a mistake entering a two digit number, press the +10  
key repeatedly to return to the original display and start again.  
Each press switches the display mode as follows :  
1 PS (Program Service name) display  
2 RT (Radio Text) display  
3 Frequency display  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
S
SB  
SR  
1 PS (Program Service name) display :  
The station name is displayed automatically when an RDS broadcast  
is received.  
If no PS data was sent, NO PSis displayed.  
Receiving preset stations in order (P.CALL)  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
S
SB  
SR  
2 RT (Radio Text) display :  
TextdataaccompanyingtheRDSbroadcastscrollsacrossthedisplay.  
NO RTis displayed if the current RDS station does not provide RT  
data.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
Joystick  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
(P.CALL 4/¢)  
LFE  
STEREO  
TUNED  
SL  
S
SB  
SR  
TUNER  
3 Frequency display :  
Displays the frequency of the current station.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
Press the TUNER key to select the tuner as the source.  
1
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
S
SB  
SR  
EN  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to radio broadcasts  
1Press the PTY key to activate the PTY search mode.  
(For the U.K. only)  
Presetting RDS stations (RDS AUTO MEMORY)  
This function automatically stores up to 40 RDS stations in the preset  
memory. In order to use the PTY function, the RDS stations must be  
stored in the preset memory using the RDS AUTO MEMORY function.  
Light up  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RPTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
S
SB  
SR  
TUNER  
MULTI CONTROL  
When an RDS broadcast is received, the program type is shown on  
the display. If no PTY data is available, or if the station is not an RDS  
station, NONEis displayed.  
While the PTYindicator is lit, use the Joystick (5/) or  
2TUNING 1 / ¡ keys select the program type of your  
choice.  
Program type table  
BAND  
MEMORY  
Program Type Name Display  
Program Type Name Display  
Pop Music  
Rock Music  
Easy Music  
Light Classical Music  
Serious Classical Music CLASSICS  
Other Music  
News  
Current Affairs  
Information  
Sport  
Education  
Drama  
POP M  
Weather  
Finance  
Childrens Program  
Social Affairs  
Religion  
Phone In  
Travel  
Leisure  
Jazz Music  
Country Music  
National Music  
Oldies Music  
Folk Music  
Documentary  
WEATHER  
1Press the TUNER key to enter tuner mode.  
ROCK M  
EASY M  
LIGHT M  
FINANCE  
CHILDREN  
SOCIAL  
RELIGION  
PHONE IN  
TRAVEL  
LEISURE  
JAZZ  
COUNTRY  
NATION M  
OLDIES  
2Use the BAND key to set the broadcast band to FM.  
OTHER M  
NEWS  
AFFAIRS  
INFO  
Press the MEMORY key continuously for more than 3  
seconds will start AUTO MEMORY.  
3
SPORT  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
CLIP  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
EDUCATE  
DRAMA  
CULTURE  
SCIENCE  
VARIED  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
Culture  
Science  
Varied Speech  
FOLK M  
DOCUMENT  
SL  
S
SB  
SR  
After a few minutes, up to 40 RDS stations are preset in order from  
channel 01.  
Stations already stored in the preset memory may be replaced by  
RDS stations. (i.e., If the RDS AUTO MEMORY function detects 15  
RDS stations, the stations currently preset at numbers 01~15 will  
be replaced by the RDS stations.)  
NO PROGRAMis displayed if this operation is attempted  
before performing the RDS Auto Memory operation.  
Press the PTY key to start searching.  
3
EXAMPLE : Searching for a Pop Music broadcast.  
Display while searching.  
Blinks  
(For the U.K. only)  
Tuning by Program TYpe (PTY search)  
This function lets you set the tuner to automatically search for stations  
which are currently broadcasting the type of program (genre) you want  
to listen to.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
RDS  
RPTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
MATRIX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
S
SB  
SR  
Program type name display  
Display when a station is received.  
Goes out  
Under certain receiving conditions, it may take more than 1  
minute to complete the search.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
MATRIX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
S
SB  
SR  
Station name display  
No sound is heard while PTYis blinking.  
If the desired program type cannot be found, NO PROGRAMis  
displayed, then after several seconds the display returns to the  
original display.  
Joystick  
(MULTI CONTROL5/,  
DOWN2 / UP3)  
PTY  
To select another program type.  
TUNING  
1/¡  
Repeat steps 1, 2 and 3.  
Preparations  
Execute the RDS auto memory procedure.  
Set the broadcast band to FM.  
Tune to an RDS station.  
EN  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ambience effects  
This receiver is equipped with listening modes that allow  
you to enjoy an enhanced sonic ambience with a variety of  
video sources.  
In order to obtain the optimum effect from the surround  
modes, make sure to input the proper speaker settings  
Dolby Digital EX  
Dolby Digital EX is an extension of Dolby Digital technology, Dolby  
DigitalEXcreatessixfull-bandwidthoutputchannelsfrom6.1-channel  
sources. This is done using a matrix decoder that derives three  
surround channels from the two in the original recording.  
Thisisachievedbyusingthreedifferentsurroundsignals,surroundleft,  
surround right, and surround back, each driving its own array of  
speakers. Think of it as adding a center channel for the rear speakers,  
which give more diffuse and natural surround effect, even if you  
wanted the ability to completely encircle the audience with sound,  
positioningsoundeffectsexactlywheretheywoludbeheardinreallife.  
Forbestresults,DolbyDigitalEXshouldbeusedwithmoviesoundtracks  
recordedwithDolbyDigitalSurroundEXwhichcontainadigitalflagthat  
will automatically activate this feature. However, for titles released  
prior to late 2001, this feature has to be activated manually.  
beforehand.  
*
Surround modes  
Dolby Digital  
The Dolby Digital surround format lets you enjoy up to 5.1 channels  
of digital surround sound from Dolby Digital program sources (such as  
Laserdisc or DVD software marked  
ous Dolby surround, Dolby Digital provides even better sound quality,  
greater spatial accuracy, and improved dynamic range.  
). Compared with previ-  
Note  
Although a full set of speakers (front left, right, and center, surround  
left and right, surround back and a subwoofer) is required for true 6.1  
channel Dolby Digital Surround EX sound, this receiver lets you enjoy  
Dolby Digital (and Dolby Surround) program sources, even if you  
connect only the front speakers.  
Note  
Although a full set of speakers (front left, right, and center, surround  
left and right, and a subwoofer) is required for true 5.1 channel Dolby  
Digital surround sound, this receiver lets you enjoy Dolby Digital (and  
Dolby Surround) program sources, even if you connect only the front  
speakers.  
Center speaker  
Subwoofer  
(SW)*  
Center speaker  
Front speakers (L, R)  
Surround  
speakers  
(L, R)  
Surround  
back speaker  
Subwoofer (SW)*  
*Optional in this mode.  
Front speakers (L, R)  
Surround  
speakers  
(L, R)  
*LFE = Low Frequency Effects. This channel delivers separate  
non-directional bass signals to the subwoofer for more dynamic  
deep bass sound effects.  
Although only Dolby Digital soundtracks incorporate a separate  
low frequency channel, connecting a subwoofer will also improve  
deep bass performance in the other surround modes.  
The indication LFEappears in the display when a signal is  
being input for this channel.  
*Optional in this mode.  
*LFE = Low Frequency Effects. This channel delivers separate  
non-directional bass signals to the subwoofer for more dynamic  
deep bass sound effects.  
Although only Dolby Digital soundtracks incorporate a separate low  
frequency channel, connecting a subwoofer will also improve deep  
bass performance in the other surround modes.  
The indication LFEappears in the display when a signal is being  
input for this channel.  
Dolby PRO LOGIC II  
Dolby Pro Logic II was designed specifically to provide a new sense  
of spatiality, directionality and articulation of sounds from Dolby  
Surround encoded sources (such as video and Laserdisc software  
marked  
). This is achieved with an intelligent, built-in  
feedback logic design, a matrix surround decoding and the decoding  
of stereo, full bandwidth surround outputs. The PRO LOGICII modes  
programmed into this receiver are MOVIE, MUSICand PRO  
LOGIC. The MOVIEmode of the PRO LOGIC II has preset  
characteristics to produce a calibrated, high-level surround sound  
playback while the MUSICmode has user-adjustable characteris-  
tics to offer the three optional controls, like Dimension, Center  
WidthandPanoramamodestoallowoptimizationofthesoundfields  
as desired. The Dimensioncontrol allows the user to gradually  
adjust the soundfield either towards the front or towards the rear; the  
Center Widthcontrol allows various adjustment of the left-center-  
right speakersbalance; the Panaromaextends the front stereo  
image to include the surround speakers for an exciting wraparound”  
effect with side wall imaging.  
DTSand DTS Digital Surroundare  
trademarks of Digital Theater Systems, Inc.  
Manufactured under license from Dolby Laboratories. Dolby, Pro  
Logicand the double-D symbol are trademarks of Dolby  
Laboratories.  
Circle Surround II and the  
® symbol are trademarks of SRS Labs,  
Inc. CircleSurroundII technologyisincorporatedunderlicensefromSRS  
Labs, Inc.  
Center speaker  
Subwoofer (SW)  
Front speakers (L, R)  
Surround  
speakers  
(L, R)  
EN  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ambience effects  
Multi channel surround sound (SRS Circle Surround II)  
DSP mode  
SRS Circle Surround II ™ improves on its predecessor CS-5.1™  
resulting in the CS-6.1™ system, enabling you to listen to realistic,  
multi-channel, surround sound playback from a stereo source or  
conventional surround-encoded video source. You already enjoy  
listening to Dolby Digital sound/DTS multi-channel sound with your  
multi-speakers. NowyoucanlistentoaudioCDs, MDs, Broadcastand  
Home Theater using your multi-speakers. You will discover a new  
type of sound through SRS Circle Surround II.  
The CS system dramatically reduces storage space requirements for  
multi-channel content. It creates a listening environment that places  
the listener “inside” music performances, and dramatically improves  
both hi-fi audio and conventional surround-encoded video material.  
The CS decoder also includes the SRS technologies Focus™ and  
TruBass™. Focus electronically raises the sound stage from the  
speaker location to an optimal position. TruBass creates deep, rich  
bass in small speaker systems without the need for a subwoofer.  
The DSP mode lets you add the atmosphere of a live concert or hall  
to almost any type of program source. These modes are particularly  
effectivewhenusedwithstereoprogramsources, likeCD, television,  
and FM radio. You might enjoy trying the ARENA, JAZZ CLUB,  
THEATER, STADIUM or DISCO mode the next time you watch a  
concert or sporting event!  
Center speaker  
Subwoofer (SW)  
Front speakers (L, R)  
Surround  
speakers  
(L, R)  
Center speaker  
Subwoofer  
(SW)  
What's DSP?  
DSP stands for Digital Signal Processor.  
The way a sound is heard in an actual environment depends on a  
varietyofdifferentfactors. Oneofthemostimportantisreverberation  
(the act of decaying elements of sound echoing in various places).  
The DSP modes produce the feeling of presence by using the DSP to  
create reverberation, without spoiling the sound quality of the original  
signal.  
Front speakers (L, R)  
Surround  
speakers  
(L, R)  
Surround  
back speaker  
DTS  
The DTS multi-channel audio format is available on CD, LD and DVD  
software. DTS is a strictly digital format and cannot be decoded inside  
most CD, LD or DVD players. For this reason, if you attempt to listen  
to DTS encoded software through the analog output of your new CD,  
LD or DVD player, you will experience digital noise in most cases. This  
noise can be quite loud if the analog output is connected directly to a  
high power amplification system. Proper measures for playing the  
digital output as described below should be taken to avoid this  
situation. To enjoy DTS Digital Surround playback, an external 5.1  
channel DTS Digital Surround decoder system or an amplifier with a  
built-in DTS Digital Surround decoder must be connected to the digital  
output (S/P DIF, AES/EBU or TosLink) of a CD, LD or DVD player.  
All models are incorporated with the DTS decoder.  
DVD 6-channel mode  
Using a DVD player or the like equipped with six (5.1) output channels  
and the receiver, you can enjoy multi-channel encoded DVD source  
material in all its splendor. Since the source signals are digital and  
each channel is input independently, the resulting sound quality,  
sense of spaciousness, and dynamic range are superb.  
Center speaker  
Subwoofer (SW)*  
Center speaker  
Front speakers (L, R)  
Surround  
speakers  
(L, R)  
Subwoofer (SW)*  
*LFE = Low Frequency Effects. This channel delivers separate non-  
directional bass singnals to the subwoofer for more dynamic deep  
bass sound effects.  
Front speakers (L, R)  
Surround  
speakers  
(L, R)  
*Optional in this mode.  
* LFE = Low Frequency Effects. This channel delivers separate non-  
directional bass signals to the subwoofer for more dynamic deep  
bass sound effects.  
DTS has a .1 or LFE channel.  
The indication “LFE” appears in the display when a signal is being  
input for this channel.  
EN  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ambience effects  
Surround play  
When you select DOLBY DIGITAL  
DOLBY DIGITALwill be displayed.  
The DTS compatible models can reproduce a CD, DVD, or LD carrying the  
DTS mark.  
DOLBY DIGITAL can be used when playing DVD or LD software bearing  
CINEMA EQ. STEREO NEO:6  
AUTO DETECT  
ACTIVE EQ. MATRIX  
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII  
DTS.  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
DOLBY DIGITAL  
THX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
L
C
R
the  
DOLBY PRO LOGIC can be used when playing video, DVD, or LD  
software bearing the mark.  
mark and DOLBY DIGITAL format digital broadcasts (etc.).  
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
SR  
SRS Circle Surround enables you to listen to multi channel sound from  
II  
the stereo source.  
When the DTS signal is input :  
(The DTS indicator lights up.)  
DSP  
INPUT MODE  
1 DTS  
:
:
DTS surround.  
2 STEREO  
Normal stereo playback.  
When the analog signal or the digital signal (except for  
DOLBY DIGITAL or DTS signal) is input :  
1 PLII MOVIE  
2 PLII MUSIC  
3 PRO LOGIC  
:
:
:
PRO LOGIC II surround MOVIE mode.  
(The PRO LOGIC indicator lights up.)  
PRO LOGIC II surround MUSIC mode.  
(The PRO LOGIC indicator lights up.)  
PRO LOGIC II surround PRO LOGIC mode.  
(The PRO LOGIC indicator lights up.)  
Input Selector  
LISTEN MODE  
LISTEN MODE%/fi  
4 CSII CINEMA : CS 6.1 surround.  
(The CS II indicator lights up.)  
CS 6.1 surround.  
INPUT MODE  
DSP MODE  
5 CSII MUSIC  
6 CSII MONO  
7 STEREO  
:
:
:
(The CS II indicator lights up.)  
CS 6.1 surround.  
(The CS II indicator lights up.)  
Normal stereo playback.  
INPUT  
SELECTOR  
(The STEREO indicator lights up.)  
Dolby Digital or DTS signal having more channels than the maxi-  
mum number of playback channels available using the receivers  
current settings is input, downmixing is performed to match the  
number of available channels.  
Preparations  
Turn ON related components.  
Complete Preparing for surround sound(speaker settings).  
*
Use the Input Selector keys to select the component you wish to play  
back with surround sound.  
Use the INPUT MODE key to select the input mode (analog or digital)  
3DSP mode (Digital Signal Processor).  
DSP can produce these effects without spoiling the sound quality of  
the original music or video source.  
for the source you wish to play back.  
9
Noise will be produced when a DTS source is played by selecting the  
analog input.  
1 Pressing the DSP or DSP MODE key will display the current  
DSP MODE status.  
1Start playing the video software.  
2 Each press of the key will switch to the next status as shown  
Use the LISTEN MODE knob or LISTEN MODE %/ keys to  
select the listening mode.  
bellow:  
2
1 ARENA  
: DSP surround ARENA mode.  
: DSP surround JAZZ CLUB mode.  
: DSP surround THEATER mode.  
: DSP surround STADIUM mode.  
: DSP surround DISCO mode.  
2 JAZZ CLUB  
3 THEATER  
4 STADIUM  
5 DISCO  
The listening mode settings are stored separately for each input. If  
the input mode is set to full auto (AUTO DETECTlights), the  
receiver selects the optimal listening mode automatically based on  
the type of input signal and the speaker settings.  
Each turn of the LISTEN MODE knob or press of the LISTEN  
MODE %/keys switches the setting as listed below.  
The DSP mode selection is displayed for approximately 3  
seconds.  
The listening mode settings are different depending on the type  
of input signal.  
4Adjust the volume.  
When the DOLBY DIGITAL or DOLBY DIGITAL EX signal is  
input :  
Notes  
Depending on the type of the signal or speaker setting, some listening  
modes cannot be selected.  
(The DOLBY DIGITAL or PRO LOGIC, indicator lights up.)  
When playback is started, the sound may be cut or interrupted before  
the input source is confirmed as Dolby Digital.  
To enjoy Dolby Digital surround (as well as all the other listening modes)  
from a single component, be sure to use a Dolby Digital compatible  
source component.  
1 DOLBY DIGITAL : DOLBY DIGITAL surround.  
2 DOLBY D EX  
3 PLII MOVIE  
:
:
DOLBY DIGITAL EX surround.  
PRO LOGIC II surround MOVIE mode.  
(The PRO LOGIC indicator lights up.)  
PRO LOGIC II surround MUSIC mode.  
(The PRO LOGIC indicator lights up.)  
PRO LOGIC II surround PRO LOGIC mode.  
(The PRO LOGIC indicator lights up.)  
Normal stereo playback.  
4 PLII MUSIC  
5 PRO LOGIC  
6 STEREO  
:
:
:
EN  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ambience effects  
Convenient functions  
DVD 6-channel playback  
UsingaDVDplayerorthelikeequippedwithsix(5.1)outputchannelsand  
the receiver, you can enjoy surround sound playback.  
When you try to play a disc other than Dolby Digital such as DTS CD, no  
sound is produced or, noise may be heard. To avoid this situation, make  
sure that you connect the component to the receivers DVD/6CH INPUT  
jacks through a surround processor which can decode the surround  
signal you want to listen to.  
STEREO DIMMER MULTI CONTROL  
Connecting a DVD player which can decode the surround signal itself is  
also acceptable.  
VOLUME  
INPUT MODE  
SOUND  
LISTEN MODE  
LISTEN MODE%/fi  
STEREO  
SOUND  
Joystick  
DVD/6CH  
(MULTI CONTROL5/,  
DOWN2 / UP3)  
DIMMER  
INPUT MODE  
DVD/6CH  
VOLUME  
/
Adjusting the sound  
You can make further adjustments to the sound while listening to  
playback in the surround mode.  
M
?
1 Press the SOUND key and then use to the  
/
keys or Joystick  
(2/3) until the desired item appears in the display.  
Preparations  
M
?
Each time you press the  
changes as follows:  
/
keys or Joystick (2/3), the menu  
Connect your DVD player to the DVD/6CH jacks of the receiver.  
Turn on all other components that will be used.  
Complete Preparing for surround sound.  
Note that some items are not displayed in certain modes.  
*
1 CNTR (Center speaker level adjustment)*  
2 SR (Right surround speaker level adjustment)*  
3 SB (Surround back speaker level adjustment)*  
4 SL (Left surround speaker level adjustment)*  
5 SUBW (Subwoofer level adjustment)*  
Press “DVD/6CH” as the input source.  
1
If speaker system B is on when DVD/6CHis selected as the input  
source, it switches off and speaker system A turns on automati-  
cally.  
6 INPUT (Input level adjustment - analog mode only)  
¡
7 MIDNIGHT (Midnight mode ON/OFF - Dolby Digital mode only)  
8 PANORAMA (Panorama mode ON/OFF)**  
9 DIMENSION (Dimension adjustment)**  
0 CENTER WIDTH (Center width adjustment)**  
- CENTER FOCUS (Center focus adjustment)***  
= CSII DLY (Rear speaker delay adjustment)***  
~ CSII GAIN (Input gain adjustment)***  
2Select "6CH INPUT" by pressing the INPUT MODE key.  
3Start playback of the DVD software.  
4Adjust the volume.  
It is not possible to adjust the volume level or sound quality (SET  
UP, SOUND) of the channels separately when the receiver is in the  
DVD/6CH mode. Adjust the volume with the controls of the DVD  
player.  
For the powered subwoofer, you can adjust the volume of the  
subwoofer using the subwoofers own volume control.  
! TruBass (Trubass adjustment)***  
*
Theadjustmentisonlytemporaryforthecurrentinputselection.  
The value will return automatically to the original setup value  
when the power is turned on/off or when the input selection is  
changed.  
** Pro Logic II Music mode only.  
*** CS II mode only.  
2 Use the MULTI CONTROL knob or Joystick (5/) to adjust the  
setting as desired.  
The adjustment item is displayed for approximately 8 seconds.  
EN  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ambience effects  
Midnight mode (Dolby Digital mode only)  
Center Width mode (Pro Logic II Music mode only)  
When watching movies at night, you might not be able to raise the  
volume as loud as normal. Midnight mode compresses the dynamic  
range of previously specified parts of the Dolby Digital sound track (like  
scenes with sudden increases in volume) to minimize the difference in  
volume between the specified and non-specified parts. This makes it  
easy to hear all of the sound track, even when listening at low volumes.  
Center width adjustment allows you to enjoy an enchanced sound when  
listening to music through center image from only center speaker, or left  
and right speakers or various combinations adjustments.  
M
/
?
1 Press the SOUND key, then press the  
keys or Joystick (2/3)  
until “CENTER WIDTH” appears on the display.  
The CENTER WIDTH indication scrolls across the display.  
When the center speaker is switched OFF, this mode will not be  
effective.  
M
?
/
1 Press the SOUND key, then press the  
keys or Joystick (2/3)  
until “MIDNIGHT” appears on the display.  
This can be selected only if CD/DVD, DVD/6CH or VIDEO 2 is selected  
as the source and the listen mode is set to DOLBY DIGITAL.  
2 Use the MULTI CONTROL knob or Joystick (5/) to adjust the  
left-center-right output.  
2 Use the MULTI CONTROL knob or Joystick (5/) to select the  
ON or OFF setting.  
Center image will be heard from center speaker only.  
CINEMA EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
CLIP  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
CINEMA EQ. STEREO NEO:6  
AUTO DETECT  
ACTIVE EQ. MATRIX  
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII  
DTS.  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
DOLBY DIGITAL  
THX  
Surround EX  
ACTIVE EQ.  
A
B
PRO LOGIC  
COAXIAL  
ANALOG  
DSP MODE DISCRETE  
LOUDNESS  
CSII  
A
B
CLIP  
L
C
SW  
R
COAXIAL  
ANALOG  
L
C
SW  
R
AUTO  
MEMO  
AUTO  
MEMO  
LFE  
LFE  
STEREO  
TUNED  
STEREO  
TUNED  
SL  
S
SB  
SR  
SL  
S
SB  
SR  
The adjustment item is displayed for approximately 8 seconds.  
Some Dolby Digital software may not be compatible with the  
Midnight mode.  
Center image will be heard from left and right speakers only.  
CINEMA EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
ACTIVE EQ.  
A
B
CLIP  
PRO LOGIC  
COAXIAL  
ANALOG  
DSP MODE DISCRETE  
LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
S
SB  
SR  
Panorama mode (Pro Logic II Music mode only)  
When in other position, center image from center speaker, left and  
right speakers can be heard simultaneously with various  
combinations.  
When listening to music, you will be able to enjoy the wraparound”  
sound effect when you adjust the panorama mode.  
M
?
/
1 Press the SOUND key, then press the  
keys or Joystick (2/3)  
until “PANORAMA” appears on the display.  
Circle Surround II mode  
2 Use the MULTI CONTROL knob or Joystick (5/) to select  
When you select the circle surround II mode, you will be able to enjoy the  
multi surround sound from the stereo source.  
PANORAMA ON or OFF.  
1 PANORAMA ON : PANORAMA mode is ON.  
2 PANORAMA OFF : PANORAMA mode is OFF.  
Use the LISTEN MODE knob or LISTEN MODE %/keys for CS II  
selection.  
CINEMA EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
ACTIVE EQ.  
A
B
CLIP  
PRO LOGIC  
COAXIAL  
ANALOG  
DSP MODE DISCRETE  
LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
Center Focus mode (CS II mode only)  
SL  
S
SB  
SR  
Center focus elevate level adjustment allows you to enjoy an enchanced  
sound when you select CS II CINEMA/MUSIC/MONO. It repositions the  
sound image to an optimal position more natural to the listener through  
the center image.  
Dimension mode (Pro Logic II Music mode only)  
M
/
?
1 Press the SOUND key, then press the  
keys or Joystick (2/3)  
When listening to music with certain recordings, you will also be able to  
achieve a suitable balance from all the speakers by adjusting the  
dimension mode.  
until “CENTER FOCUS” appears on the display.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
M
?
/
1 Press the SOUND key, then press the  
keys or Joystick (2/3)  
STEREO  
TUNED  
until “DIMENSION” appears on the display.  
SL  
SB  
SR  
2 Use the MULTI CONTROL knob or Joystick (5/) to adjust the  
soundfield towards the rear or the front.  
2 Use the MULTI CONTROL knob or Joystick (5/) to adjust the  
center elevation level.  
The adjustment range is from 0 to 10.  
Soundfield is adjusted towards the front.  
CINEMA EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
ACTIVE EQ.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
A
B
CLIP  
PRO LOGIC  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
COAXIAL  
ANALOG  
DSP MODE DISCRETE  
LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
LFE  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
S
SB  
SR  
STEREO  
TUNED  
SL  
SB  
SR  
CENTER FOCUS will not be available when the center speaker is  
OFF.  
Soundfield is in neutral position.  
CINEMA EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
ACTIVE EQ.  
A
B
CLIP  
PRO LOGIC  
COAXIAL  
ANALOG  
DSP MODE DISCRETE  
LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
S
SB  
SR  
Soundfield is adjusted towards the rear.  
CINEMA EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
ACTIVE EQ.  
A
B
CLIP  
PRO LOGIC  
COAXIAL  
ANALOG  
DSP MODE DISCRETE  
LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
S
SB  
SR  
EN  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ambience effects  
CS II Rear Delay adjustment mode (CS II mode only)  
Display dimmer adjustment  
CS II Rear Delay adjustment provides a better sound effect from the rear  
speakers.  
The dimmer function lets you select the brightness of the receiver's  
display. You might find this useful if you darken your room to watch  
movies or listen to music.  
M
/
?
1 Press the SOUND key, then press the  
keys or Joystick (2/3)  
until “CSII DLY” appears on the display.  
Each time you press the DIMMER key, the display’s brightness  
changes among the three available settings.  
2 Use the MULTI CONTROL knob or Joystick (5/) to adjust the  
rear speaker.  
• The adjustment range is from 0 ms to 25 ms.  
Select the brightness level you find most pleasing.  
1 Bright  
2 Medium  
3 Dark  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
SB  
SR  
96kHz LPCM playback  
The receiver is compatible with the 96kHz LPCM playback. To play a  
96kHz DVD, set the listen mode to “STEREO”.  
CS II Gain adjustment mode (CS II mode only)  
CS II GAIN allows user to adjust the input gain for the Circle Surround II  
processing.  
• In FULL AUTO input mode, the listen mode will automatically be  
STEREO.  
• When in DIGITAL MANUAL input mode (listen mode is not STEREO),  
“FS 96kHz” will appear in the display and no sound can be heard from  
the speakers.  
M
?
1 Press the SOUND key, then press the  
/
keys or Joystick (2/3)  
until “CSII GAIN” appears on the display.  
Press the LISTEN MODE or STEREO key (the listen mode changes to  
the STEREO mode) to output sound from the speakers.  
2 Use the MULTI CONTROL knob or Joystick (5/) to adjust the  
input gain.  
• The adjustment range is from 0 to 18.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
SB  
SR  
TruBass adjustment mode (CS II mode only)  
TruBass adjustment provides deep, rich bass sound to various speakers.  
M
/
?
1 Press the SOUND key, then press the  
keys or Joystick (2/3)  
until “TruBass” appears.  
2 Use the MULTI CONTROL knob or Joystick (5/) to select the  
following;  
1 TruBass OFF  
2 TruBass SW  
3 TruBass LR  
4 TruBass SW + LR  
• Afterselecting2,3or4,TruBassspeakersizeandleveladjustment  
selection will be available.  
3 For TruBass speaker selection, use the MULTI CONTROL knob  
or Joystick (5/) to select any of the following display;  
1 TruBass LARGE  
2 TruBass MID  
3 TruBass SMALL  
4 Use the MULTI CONTROL knob or Joystick (5/) to adjust the  
TruBass Level.  
• The adjustment range is from 0 (TruBass OFF) to 10.  
CINEMA EQ.  
ACTIVE EQ.  
DTS. DOLBY DIGITAL STEREO NEO:6  
MATRIX  
RDS  
RTY  
SP  
MUTE OPTICAL 6CH INPUT  
AUTO DETECT  
96kHzfs  
THX  
Surround EX  
A
B
CLIP  
COAXIAL  
ANALOG  
DSP MODE DISCRETE PRO LOGIC LOUDNESS  
CSII  
L
C
SW  
R
AUTO  
MEMO  
LFE  
STEREO  
TUNED  
SL  
SB  
SR  
EN  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic remote control operations for other components  
2 The OTHERS key enables you to operate another DVD, CD,  
CBL, DSS/SAT, CBL/SAT, VCR or TV component.  
Theremotecontrolsuppliedwiththisreceiverisalsocapable  
of controlling components from a variety of manufacturers  
once you register the appropriate setup codes into the  
remote control unit.  
For OTHERS key;  
Hold down the OTHERS key and press the numeric keys to  
enter the setup code.  
Low battery warning  
Replacealltwobatterieswithnewoneswhenyounoticeashortening  
of the distance from which the remote control will operate. In order  
to retain the setup codes, please change the batteries approximately  
within 30 seconds. If the setup codes are erased, please re-enter the  
codes.  
• Example: After you have registered the KENWOOD DVD player,  
press804toregisteranotherDVDplayerwhichismanufactured  
by Panasonic.  
• If you push an invalid key, the remote control will exit the setup  
mode.  
Registering setup codes for other components  
Press any of the REMOTE MODE key and then press the  
3
SOURCE  
key to check that the component you want to  
control turns on.  
If the component does not react, and there is more than one  
setup code, enter another setup code and try again.  
SOURCE  
REMOTE MODE  
Numeric keys  
• If the component is already on, pressing the SOURCE  
key will  
turn it off.  
Repeat steps 2 to 3 to register additional components until  
4
all components have been registered.  
INPUT  
SELECTOR  
Alternative REMOTE MODE key .  
This operation is optional and is convenient when you link an INPUT  
SELECTOR key to the REMOTE MODE key. While operating one  
component, the INPUT SELECTOR key functions as an alternative  
REMOTE MODE key to select another component.  
Find the setup code of the component to be registered.  
1
• Refer to the setup code lists to find the setup code for the  
component to be registered.  
Example: To register a DVD made by KENWOOD, you would enter  
“805”.  
fifl  
• Example: REMOTE MODE (DVD) key can be linked to the INPUT  
SELECTOR (VIDEO 1) key as described below;  
1 After registering the setup code, press and hold the SOURCE  
Input  
Component  
Maker  
Code  
Key  
key and then press the REMOTE MODE (DVD) key.  
(DVD)  
DVD player KENWOOD  
805, 808  
DVD  
2 While holding down the SOURCE , press the INPUT  
SELECTOR (VIDEO 1) key.  
• Now the VIDEO 1 key will function as a DVD key which can be  
selected at the same time while operating a CD player.  
• Repeat step 1 to 2 to link other INPUT SELECTOR keys.  
Note  
Although each setup code is designed to work with a number of  
different models, certain codes may not work with some models.  
(Also, certain codes may only operate some of the functions available  
on a given model.)  
Registering components for REMOTE MODE [(DVD, CBL,  
DSS/SAT, VCR, TV, OTHERS - RC-R0725/R0727) or (DVD, CD,  
CBL/SAT, VCR, TV, OTHERS - RC-R0726)] keys.  
2
1 For DVD, CD, CBL, DSS/SAT, CBL/SAT, VCR or TV keys;  
Hold down the SOURCE key and press the numeric keys to  
enter the setup code.  
• Example: Press “805” to register a DVD player manufactured by  
KENWOOD.  
• If you push an invalid key, the remote control will exit the setup  
mode.  
EN  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic remote control operations for other components  
Operating other components  
This operation lets you operate the registered components.  
KENWOOD audio components with system control turn on and off  
automatically with the receiver via the system control connections.  
SOURCE  
RECEIVER  
INPUT  
SELECTOR  
Use the INPUT SELECTOR keys to select the component you  
desire.  
1
PressingtheINPUTSELECTORkeysalsochangestheinputselector  
on the receiver.  
When you operate your registered DVD player, Cable tuner,  
DSS/SAT receiver, VCR or TV, go to step 2.  
When you operate the CD player, Cassette deck, MD player, or  
Tuner with system control connection, go to step 3.  
Press the SOURCE key.  
2
3
Toreturntothereceiveroperationmode, presstheRECEIVER key.  
Press the operation keys you desire.  
°
The remote control mode remains at the selected input. If you  
wish to operate another component, repeat step 2 or 3.  
Note  
Be sure to point the remote control at the remote sensor on the  
receiverwhenyouwanttooperateKENWOODcomponentsconnected  
by system control cords. Otherwise, point the remote control at the  
component you want to operate.  
EN  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic remote control operations for other components  
Setup code chart (RC-R0727) (VR-6050/KRF-V6060D)/(RC-R0725)(KRF-V7060D)  
TV Setup codes  
VCR Setup codes  
Maker  
Setup codes  
Maker  
Setup codes  
AKAI  
125  
AIWA  
352  
BELL+HOWELL  
CENTURION  
CORONAD  
DAEWOO  
EMERSON  
FISHER  
142  
126  
127  
AKAI  
354, 355, 356  
351  
349  
334, 335, 336, 337, 338  
330, 341, 342, 343  
307, 321  
BELL+HOWELL  
DAEWOO  
EMERSON  
FISHER  
136, 140, 141, 145  
130, 131, 132, 133, 146  
119  
G.E.  
G.E.  
102, 122, 129  
137, 148  
114, 115  
113  
GOLD STAR  
GO_VIDEO  
HITACHI  
JVC  
323  
347, 348, 353  
307, 308, 328, 329  
324, 325, 326, 327  
GOLD STAR  
HITACHI  
JVC  
KTV  
LOEWE  
138, 139  
123, 124  
109, 147  
121  
MAGNAVOX  
MITSUBISHI  
NEC  
311, 312, 313  
315, 316, 317, 318, 357, 358  
344, 345  
335  
309, 310  
313  
309, 310, 311, 312  
308  
MAGNAVOX  
MARANTZ  
MITSUBISHI  
PANASONIC  
PHILIPS  
PIONEER  
PROSCAN  
RADIOSHACK  
RCA  
ORION  
121  
PANASONIC  
PHILIPS  
QUASAR  
RCA  
SAMSUNG  
SANYO  
111, 112, 122, 129  
109, 147  
116  
117  
332, 339, 340  
351  
331  
128  
102, 103, 104, 105, 106, 126  
SCOTT  
SAMSUNG  
SANYO  
SEARS  
134, 135  
119  
120  
SHARP  
SHINTOM  
SONY  
319, 320  
333  
301, 302, 303, 304, 305, 306  
SHARP  
SONY  
SYMPHONIC  
TOSHIBA  
QUASAR  
ZENITH  
110  
101  
143, 144  
120  
111, 118  
107, 108  
SYNPHO  
TEKNICA  
TOSHIBA  
ZENITH  
346  
346, 350  
314  
322  
DVD player Setup codes  
Maker  
Setup codes  
HITACHI  
JVC  
KENWOOD  
MITSUBISHI  
ONKYO  
PANASONIC  
PHILIPS  
PIONEER  
PROSCAN  
RCA  
SAMSUNG  
SONY  
TOSHIBA  
YAMAHA  
ZENITH  
812  
801  
805, 808  
810  
815, 816  
804  
807  
803  
811  
811  
CBL codes  
Maker  
Setup codes  
GEMINI  
G.I.  
HAMLIN  
JERROLD  
218  
209  
210, 211, 234, 235  
201, 202, 224, 225, 226, 227,  
228, 229, 233  
215, 216, 217  
236  
212, 213, 214  
221, 222, 232  
219, 220, 237, 238, 239, 240  
206, 207  
MACOM  
MAGNAVOX  
OAK  
PANASONIC  
PHILIPS  
PIONEER  
SAMSUNG  
S. ATLANTA  
TOCOM  
814  
802  
806  
809  
806, 813  
223  
203, 230, 231  
208  
DSS/SAT codes  
Maker  
Setup codes  
ZENITH  
204, 205  
ECHOSTAR  
G.I.  
903  
902  
908  
906  
905  
909  
901  
907  
904  
HITACHI  
HUGHES  
PANASONIC  
PRIMESTAR  
RCA  
SONY  
TOSHIBA  
EN  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic remote control operations for other components  
Setup code chart (RC-R0726) (KRF-V6060D) (For the U.K. only)  
TV Setup codes  
VCR Setup codes  
Maker  
Setup codes  
Maker  
Setup codes  
AKAI  
408  
AIWA  
513  
BLAUPUNKT  
FENNER  
FISHER  
GRUNDIG  
HITACHI  
INNO-HIT  
IRRADIO  
JVC  
401  
412  
413  
402  
414, 415  
416  
408  
417  
BELL+HOWELL  
BLAUPUNKT  
CGM  
DIGTAL  
FISHER  
514  
501  
514, 515  
515  
514  
516  
502  
517, 518  
519  
G.E.  
GRUNDIG  
HITACHI  
JVC  
LOEWE  
429, 430  
MAGNAVOX  
MIVER  
NOKIA  
NORDMENDE  
OKANO  
ORION  
PANASONIC  
PHILIPS  
SABA  
406  
401  
403  
404, 405  
416  
418  
419, 420  
406  
LOEWE  
503, 504  
501, 515  
520, 521, 522, 523  
505  
506, 507, 508  
524  
509  
515  
510  
MAGNAVOX  
MITSUBISHI  
NOKIA  
NORDMENDE  
PANASONIC  
PHILIPS  
PHONOLA  
SABA  
404, 407  
SAMSUNG  
SANYO  
421  
413  
SAMSUNG  
SANYO  
525, 526  
514  
SCHNEIDER  
SHARP  
SONY  
TELEFUNKEN  
THOMSON  
TOSHIBA  
408  
422  
SHARP  
SIEMENS  
SONY  
TELEFUNKEN  
TOSHIBA  
527, 528  
502  
529, 530, 531  
511, 512  
532  
423, 424, 425, 426, 427  
407, 409, 410  
411  
428  
CBL/SAT codes  
DVD player Setup codes  
Maker  
Setup codes  
Maker  
Setup codes  
AMSTRAD  
CANAL+  
D-BOX  
ECHOSTAR  
FORCE  
GALAXIS  
GRUNDIG  
HIRSCHMANN  
ITT  
601, 602, 603, 604, 633  
622  
626  
619, 620, 621, 623  
630  
629  
605, 606  
639  
609  
JVC  
801  
805, 808  
804  
807  
803  
KENWOOD  
PANASONIC  
PHILIPS  
PIONEER  
SONY  
802  
806  
TOSHIBA  
JERROLD  
JVC  
JVC/BT  
KATHREIN  
MASCOM  
NOKIA  
PACE  
PANASONIC  
PHILIPS  
SELECTOR  
SKYMASTER  
THOMSON  
TPS/SAGEM  
TRIAX  
616  
614  
613  
611, 612, 636  
634  
628, 635  
608, 627  
615  
607, 625  
631  
610, 638  
637  
624  
CD player Setup codes  
Maker  
Setup codes  
DENON  
ONKYO  
PHILIPS  
PIONEER  
SONY  
702  
704  
705  
706  
701  
703  
707  
TEAC  
YAMAHA  
632  
VIDEOWAY  
617, 618  
EN  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic remote control operations for other components  
CASSETTE deck, CD player & MD recorder operations  
You can perform these basic operations using the keys described below when connected to KENWOOD cassette deck, CD player or MD recorder  
equipped with system control operations.  
&
Cassette deck operations keys  
CD player operation keys  
SOURCE POWER  
SOURCE POWER  
DVD  
VCR  
1
CBL  
REMOTE MODE  
TV  
DSS/SAT  
OTHERS  
3
RECEIVER  
DVD  
VCR  
1
CBL  
REMOTE MODE  
TV  
DSS/SAT  
OTHERS  
3
RECEIVER  
CD  
CBL/SAT  
CD  
CBL/SAT  
(For RC-R0726 only)  
(For RC-R0726 only)  
2
5
8
0
2
5
8
0
LISTEN MODE  
ACTIVE EQ  
LISTEN MODE  
ACTIVE EQ  
4
7
6
9
4
7
6
9
Numeric keys  
(Select tracks)  
SPEAKER EQ  
MUTE  
SPEAKER EQ  
MUTE  
+10  
+100  
+10  
+100  
INPUT MODE STEREO DSP MODE  
INPUT MODE STEREO DSP MODE  
TV CONTROL  
TV CONTROL  
¢
¢
+
+
+
+
+
+
DVD  
DVD  
VOL.  
VOL.  
4
4
INPUT  
SEL  
INPUT  
SEL  
-
CH  
-
-
VOLUME  
-
CH  
-
-
VOLUME  
TOP MENU  
SET UP  
MENU  
SOUND  
TOP MENU  
SET UP  
MENU  
SOUND  
3(Skip up)  
2(Skip down)  
P.CALL  
P.CALL  
/UP  
£
P.CALL  
P.CALL  
/UP  
£
4
/DOWN  
¢
4
/DOWN  
¢
ENTER  
ENTER  
MULTI  
MULTI  
PAGE DOWN PAGE UP  
PTY RDS DISP  
PAGE DOWN PAGE UP  
PTY RDS DISP  
CONTROL  
CONTROL  
OSD  
RETURN  
OSD  
RETURN  
PAGE  
PAGE  
(For RC-R0726 only)  
(For RC-R0726 only)  
TUNING  
FLIP  
BAND  
TUNING  
FLIP  
BAND  
1(Rewind)  
¡(Fast Forward)  
1(Backward Search)  
¡(Forward Search)  
3
/
8
(3Play)  
1
¡
2
6
1
¡
2
6
3/8  
(Play/Pause)  
2(Reverse play)  
INPUT SEL  
DISC SEL  
A/B  
AUTO  
8
INPUT SEL  
DISC SEL  
A/B  
AUTO  
8
DISC SKIP  
CD/DVD  
7
DIMMER  
DISC SKIP  
CD/DVD  
7
DIMMER  
DISC SEL  
(Disc selection)  
DISC SKIP  
A/B  
(Cassette deck  
selection)  
DVD/6CH  
AUX  
TUNER  
DVD/6CH  
AUX  
TUNER  
7(Stop)  
7(Stop)  
VIDEO  
1
VIDEO  
2
VIDEO  
3
MD/TAPE  
VIDEO  
1
VIDEO  
2
VIDEO  
3
MD/TAPE  
INPUT SELECTOR  
INPUT SELECTOR  
PHONO  
PHONO  
AV AUX  
AV AUX  
LOUDNESS  
TONE  
BASS BOOST  
LOUDNESS  
TONE  
BASS BOOST  
(For RC-R0726 and  
RC-R0725 only)  
(For RC-R0726 and  
RC-R0725 only)  
MD recorder operation keys  
SOURCE POWER  
DVD  
CBL  
REMOTE MODE  
TV  
DSS/SAT  
OTHERS  
3
RECEIVER  
CD  
CBL/SAT  
VCR  
1
(For RC-R0726 only)  
2
5
8
0
LISTEN MODE  
ACTIVE EQ  
4
7
6
9
Numeric keys  
(Select tracks)  
SPEAKER EQ  
MUTE  
+10  
+100  
+100  
Select tracks  
INPUT MODE STEREO DSP MODE  
(
)
TV CONTROL  
¢
+
+
+
DVD  
VOL.  
4
INPUT  
SEL  
-
-
-
CH  
VOLUME  
TOP MENU  
SET UP  
MENU  
SOUND  
3(Skip up)  
2(Skip down)  
P.CALL  
P.CALL  
/UP  
£
4
/DOWN  
¢
ENTER  
MULTI  
PAGE DOWN PAGE UP  
PTY RDS DISP  
CONTROL  
OSD  
RETURN  
PAGE  
(For RC-R0726 only)  
TUNING  
FLIP  
BAND  
1(Backward Search)  
¡(Forward Search)  
1
¡
2
6
3
/8  
(Play)  
INPUT SEL  
DISC SEL  
A/B  
AUTO  
8
DISC SKIP  
CD/DVD  
7
DIMMER  
DVD/6CH  
AUX  
TUNER  
7(Stop)  
VIDEO  
1
VIDEO  
2
VIDEO  
3
MD/TAPE  
PHONO  
INPUT SELECTOR  
AV AUX  
LOUDNESS  
TONE  
BASS BOOST  
(For RC-R0726 and  
RC-R0725 only)  
EN  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic remote control operations for other components  
Other components’ operations  
Refer to the following for the type of remote control operations available for each component.  
• When pressing keys in succession, press each key firmly and be sure  
1 Select the input source.  
to wait at least 1 second before pressing the next key.  
• Numeric keys function the same as the numeric keys on the original  
remote.  
2 Press the keys corresponding to the operations you desire.  
Refer to the following sections for details.  
These keys can be used to perform the basic operations of KENWOOD and other manufacturers’ components which the setup code for each  
component had been entered beforehand.  
fifl  
TV operation keys  
VCR operation keys  
SOURCE POWER  
SOURCE POWER  
SOURCE  
(Source power)  
DVD  
VCR  
1
CBL  
REMOTE MODE  
TV  
DSS/SAT  
OTHERS  
3
RECEIVER  
DVD  
VCR  
1
CBL  
REMOTE MODE  
TV  
DSS/SAT  
OTHERS  
3
RECEIVER  
CD  
CBL/SAT  
CD  
CBL/SAT  
(For RC-R0726 only)  
(For RC-R0726 only)  
2
5
8
0
2
5
8
0
LISTEN MODE  
ACTIVE EQ  
LISTEN MODE  
ACTIVE EQ  
4
7
6
9
4
7
6
9
Numeric keys  
Numeric keys  
SPEAKER EQ  
MUTE  
SPEAKER EQ  
MUTE  
+10  
+100  
+10  
+100  
MUTE  
INPUT MODE STEREO DSP MODE  
INPUT MODE STEREO DSP MODE  
VOL + / –  
(Volume + / –)  
(Power on/off)  
TV CONTROL  
TV CONTROL  
¢
¢
+
+
+
+
+
+
DVD  
DVD  
VOL.  
VOL.  
INPUT SEL  
(Input selection)  
4
4
INPUT  
SEL  
INPUT  
SEL  
-
CH  
-
-
VOLUME  
-
CH  
-
-
VOLUME  
CH + / –  
(Channel + / –)  
CH + / –  
(Channel + / )  
TOP MENU  
SET UP  
MENU  
SOUND  
TOP MENU  
SET UP  
MENU  
SOUND  
P.CALL  
/DOWN  
P.CALL  
/UP  
£
P.CALL  
/DOWN  
P.CALL  
/UP  
£
4
¢
4
¢
ENTER  
ENTER  
ENTER  
MULTI  
MULTI  
PAGE DOWN PAGE UP  
PAGE DOWN PAGE UP  
PTY RDS DISP  
CONTROL  
CONTROL  
PTY  
RDS DISP  
OSD  
RETURN  
OSD  
RETURN  
PAGE  
PAGE  
(For RC-R0726 only)  
(For RC-R0726 only)  
1(Rewind)  
¡(Fast Forward)  
TUNING  
FLIP  
BAND  
TUNING  
FLIP  
BAND  
1
¡
2
6
1
¡
2
6
3
/
8
(3Play)  
INPUT SEL  
DISC SEL  
A/B  
AUTO  
8
INPUT SEL  
DISC SEL  
A/B  
AUTO  
8
DISC SKIP  
CD/DVD  
7
DIMMER  
DISC SKIP  
CD/DVD  
7
DIMMER  
8(Pause)  
INPUT SEL  
(Input selection)  
DVD/6CH  
AUX  
TUNER  
DVD/6CH  
AUX  
TUNER  
7(Stop)  
VIDEO  
1
VIDEO  
2
VIDEO  
3
MD/TAPE  
VIDEO  
1
VIDEO  
2
VIDEO  
3
MD/TAPE  
PHONO  
INPUT SELECTOR  
INPUT SELECTOR  
PHONO  
AV AUX  
AV AUX  
(For RC-R0726 and  
RC-R0725 only)  
LOUDNESS  
TONE  
BASS BOOST  
LOUDNESS  
TONE  
BASS BOOST  
(For RC-R0726 and  
RC-R0725 only)  
EN  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic remote control operations for other components  
DSS/SAT (or CBL/SAT) receiver operation keys  
Cable tuner operation keys  
SOURCE POWER  
SOURCE POWER  
SOURCE  
(Source power)  
SOURCE  
(Source power)  
DVD  
VCR  
1
CBL  
REMOTE MODE  
TV  
DSS/SAT  
OTHERS  
3
RECEIVER  
DVD  
VCR  
1
CBL  
REMOTE MODE  
TV  
DSS/SAT  
OTHERS  
3
RECEIVER  
CD  
CBL/SAT  
CD  
CBL/SAT  
(For RC-R0726 only)  
(For RC-R0726 only)  
2
5
8
0
2
5
8
0
LISTEN MODE  
ACTIVE EQ  
LISTEN MODE  
ACTIVE EQ  
4
7
6
9
4
7
6
9
Numeric keys  
Numeric keys  
SPEAKER EQ  
MUTE  
SPEAKER EQ  
MUTE  
+10  
+100  
+10  
+100  
INPUT MODE STEREO DSP MODE  
INPUT MODE STEREO DSP MODE  
TV CONTROL  
TV CONTROL  
¢
¢
+
+
+
+
+
+
DVD  
DVD  
VOL.  
VOL.  
4
4
INPUT  
SEL  
INPUT  
SEL  
-
CH  
-
-
VOLUME  
-
CH  
-
-
VOLUME  
CH + / –  
(Channel + / )  
CH + / –  
(Channel + / )  
TOP MENU  
SET UP  
MENU  
SOUND  
TOP MENU  
SET UP  
MENU  
SOUND  
MENU  
5(Cursor up)  
(Cursor down)  
P.CALL  
P.CALL  
/UP  
£
P.CALL  
P.CALL  
/UP  
£
4
/DOWN  
¢
4
/DOWN  
¢
ENTER  
ENTER  
ENTER  
ENTER  
MULTI  
MULTI  
2
(Cursor left)  
CONTROL  
CONTROL  
3
(Cursor right)  
OSD  
RETURN  
OSD  
RETURN  
PAGE  
PAGE  
PAGE DOWN PAGE UP  
PAGE DOWN PAGE UP  
PTY RDS DISP  
TUNING  
FLIP  
BAND  
PTY  
RDS DISP  
TUNING  
FLIP  
BAND  
1
¡
2
6
1
¡
2
6
(For RC-R0726 only)  
(For RC-R0726 only)  
INPUT SEL  
DISC SEL  
A/B  
AUTO  
8
INPUT SEL  
DISC SEL  
A/B  
AUTO  
8
DISC SKIP  
CD/DVD  
7
DIMMER  
DISC SKIP  
CD/DVD  
7
DIMMER  
DVD/6CH  
AUX  
TUNER  
DVD/6CH  
AUX  
TUNER  
VIDEO  
1
VIDEO  
2
VIDEO  
3
MD/TAPE  
VIDEO  
1
VIDEO  
2
VIDEO  
3
MD/TAPE  
INPUT SELECTOR  
INPUT SELECTOR  
PHONO  
PHONO  
AV AUX  
AV AUX  
LOUDNESS  
TONE  
BASS BOOST  
LOUDNESS  
TONE  
BASS BOOST  
(For RC-R0726 and  
RC-R0725 only)  
(For RC-R0726 and  
RC-R0725 only)  
DVD player operation keys  
SOURCE POWER  
SOURCE  
(Source power)  
DVD  
VCR  
1
CBL  
REMOTE MODE  
TV  
DSS/SAT  
OTHERS  
3
RECEIVER  
CD  
CBL/SAT  
(For RC-R0726 only)  
2
5
8
0
LISTEN MODE  
ACTIVE EQ  
4
7
6
9
Numeric keys  
(Select tracks)  
SPEAKER EQ  
MUTE  
+10  
+100  
INPUT MODE STEREO DSP MODE  
TV CONTROL  
¢(Skip up)  
4(Skip down)  
¢
+
+
+
DVD  
VOL.  
4
INPUT  
SEL  
-
-
-
VOLUME  
CH  
TOP MENU  
SET UP  
MENU  
MENU  
5(Cursor up)  
(Cursor down)  
SOUND  
TOP MENU  
PAGE DOWN PAGE UP  
(Title)  
P.CALL  
P.CALL  
/UP  
£
PTY  
RDS DISP  
4
/DOWN  
¢
ENTER  
(For RC-R0726 only)  
2
(Cursor left)  
(Cursor right)  
MULTI  
PAGE %/fi  
CONTROL  
3
(Page up or down)  
OSD  
RETURN  
ENTER  
PAGE  
OSD  
RETURN  
TUNING  
FLIP  
BAND  
1(Backward Search)  
¡(Forward Search)  
3
/
8
(3Play)  
1
¡
2
6
2(Flip)  
8(Pause)  
INPUT SEL  
DISC SEL  
A/B  
AUTO  
8
DISC SKIP  
CD/DVD  
7
DIMMER  
DVD/6CH  
AUX  
TUNER  
7(Stop)  
VIDEO  
1
VIDEO  
2
VIDEO  
3
MD/TAPE  
INPUT SELECTOR  
PHONO  
AV AUX  
LOUDNESS  
TONE  
BASS BOOST  
(For RC-R0726 and  
RC-R0725 only)  
EN  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In case of difficulty  
For the U.S.A. and Canada  
Resetting the Microcomputer  
The microcomputer may malfunction (unit cannot be operated, or  
shows an erroneous display) if the power cord is unplugged while  
the power is ON, or due to some other external factor. If this  
happens, execute the following procedure to reset the microcom-  
puter and return the unit to its normal operating condition.  
Unplug the power cord from the wall outlet, then plug it  
back in while holding down the POWER ON/STANDBY  
key.  
For other countries  
With the power cord plugged in, turn the POWER ON/  
OFF key OFF. Then, while holding down the ON/  
STANDBY key, press POWER ON/OFF.  
Please note that resetting the microcomputer will clear the contents  
of the memory and returns the unit to the state it was in when it left  
the factory.  
Amplifier  
Symptom  
Cause  
Remedy  
No sound from the speakers.  
The speaker cords are disconnected.  
Connect them properly referring to Connect-  
ing the speakers”  
Adjust the volume to a proper level.  
Turn OFF the MUTE.  
$
VOLUME is set to the minimum position.  
MUTE is ON.  
The SPEAKERS switches are set to OFF.  
¡
Set the SPEAKERS switches to ON.  
The standby indicator blinks and sound is Speaker cords are short-circuited.  
not output.  
Turn the power off, eliminate the short-circuit-  
ing, then turn on the power again.  
Soundisnotoutputfromoneofthespeakers. The speaker cord is disconnected.  
Connect it properly referring to Connecting  
the speakers.  
$
Sound is not output from the surround The surround speaker cords and/or the center Connect it properly referring to Connecting  
speakers and / or the center speaker, or their  
sound is very small.  
speaker cord is disconnected.  
A surround mode has not been engaged.  
The surround and/or center volume controls Adjust the speaker levels using the test tone.  
are set to the minimum level.  
the speakers.  
Select a surround mode.  
$
(
A humming noise is generated when the The audio cord from the record player is not Insert the audio cord plugs securely into the  
PHONO input selector is selected.  
connected to the PHONO jacks.  
The record player is not grounded.  
PHONO jacks.  
Connect the grounding wire to the GND termi-  
nal on the rear panel.  
When playing a Dolby Digital source signal There are many possible causes for this prob- Set the input mode to digital manual before  
using a DVD player, the sound is cut off soon  
after it starts.  
lem, depending on the type of DVD player  
used.  
starting playback of the Dolby Digital source.  
9
No sound is produced during playback from The input mode is set to digital manual.  
a DVD player.  
Press the INPUT MODE key to select to full  
auto mode.  
9
A video source cannot be recorded  
normally.  
The software is copy-guarded.  
Copy-guarded video software cannot be re-  
corded.  
Tuner  
Symptom  
Cause  
Remedy  
Radio stations cannot be received.  
No antenna is connected.  
The broadcast band is not set properly.  
Connect an antenna.  
Set the broadcast band properly.  
^
The frequency of the desired station is not Tune the frequency of the desired station.  
tuned.  
¢
Interference.  
Noise due to ignition noise from an automo- Install the outdoor antenna away from the  
bile.  
road.  
Noise due to interference from an electric Turn off the power to the appliance.  
appliance.  
Noise due to a nearby TV set.  
Install the receiver farther away from the TV.  
A station which was preset cannot be re- The preset station belongs to a frequency that Preset a station with a receivable frequency.  
ceived by pressing the corresponding nu-  
meric key.  
cannot be received.  
The preset memory was cleared because the Preset the station again.  
power cord had been unplugged for a long  
period of time.  
EN  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In case of difficulty  
Remote control unit  
Symptom  
Cause  
Remedy  
Certain inputs cannot be selected using the  
remote control.  
No setup codes registered for the respective Registerasetupcodeattherespectiveinput(s).  
input(s). fifl  
Remote control operation is not possible.  
The remote control is set to a different opera- Press the source select keys or SOURCE  
tion mode.  
keystoselecttheappropriateoperationmode.  
Batteries are exhausted.  
Replace with new batteries.  
The remote control unit is too far away from Operate the remote control unit within the  
the main system, controlling angle is too large,  
or there is an obstacle between the receiver  
and the remote.  
controllable range.  
The audio cords and system control cords are Connect properly referring to Setting up the  
not connected properly. system.  
Nosoftwareisloadedinthesourcecomponent. Place software in the source component you  
want to play.  
An attempt is made to play a tape which is Wait until recording has completed.  
being recorded in the cassette deck.  
The remote control has not been set to the Press the source select keys or SOURCE  
operation mode for the component you wish  
to control.  
key to activate the operation mode for the  
component you want to control before  
operation.  
EN  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caution : Read this page carefully to ensure safe  
operation.  
Specifications  
For the U.S.A and Canada  
Tone control  
AUDIO section (VR-6050)  
BASS............................................................... 10 dB (at 100 Hz)  
TREBLE ........................................................... 10 dB (at 10 kHz)  
Rated power output during STEREO operation  
100 watts per channel minimum RMS, both channels driven,  
at 8 from 20 Hz to 20 kHz with no more than 0.09% total  
harmonic distortion. (FTC)  
DIGITAL AUDIO section  
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz  
Input level / impedance / wave length  
Effective power output during SURROUND operation  
FRONT (20 ~ 20 kHz, 0.09 % T.H.D. at 8 one channel driven)  
............................................................................... 100 W + 100 W  
CENTER (20 ~ 20 kHz, 0.09 % T.H.D. at 8 one channel  
driven) .................................................................................. 100 W  
SURROUND (20 ~ 20 kHz, 0.7 % T.H.D. at 8 one channel  
driven) ................................................................... 100 W + 100 W  
Total harmonic distortion .......................0.009 % (1 kHz, 50 W, 8 )  
Frequency response  
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)  
................................................. 10 Hz ~ 100 kHz, +0 dB ~ 3.0 dB  
Signal to noise ratio (IHF66)  
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)  
............................................................................................... 95 dB  
Loudness control  
Optical ........................... (15 dBm ~ 24 dBm), 660 nm 30 nm  
Coaxial................................................................... 0.5 Vp-p / 75 Ω  
VIDEO section  
VIDEO inputs / outputs  
VIDEO (composite) ................................................. 1 Vp-p / 75 Ω  
S VIDEO inputs /outputs  
S VIDEO (luminance signal)................................... 1 Vp-p / 75 Ω  
S VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75 Ω  
VOLUME at 30 dB level ...................................... +6 dB (100 Hz)  
Input sensitivity / impedance  
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)  
.............................................................................. 500 mV / 47 kΩ  
Output level / impedance  
TAPE REC ............................................................... 500 mV / 1 kΩ  
PRE OUT (SURROUND BACK CHANNEL) .............. 2.5 V / 1 kΩ  
PRE OUT (SUBWOOFER) ......................................... 2.5 V / 1 kΩ  
Tone control  
FM tuner section  
Tuning frequency range................................. 87.5 MHz ~ 108.0 MHz  
Usable sensitivity (MONO)  
VR-6050  
................... 1.3 µV (75 )/ 13.2 dBf (75 kHz dev, SINAD 30 dB)  
KRF-V7060D/V6060D .....................................................................  
................... 1.6 µV (75 )/ 15.2 dBf (75 kHz dev, SINAD 30 dB)  
50 dB quieting sensitivity  
STEREO ..................................................... 28 µV (75 )/ 40.2 dBf  
Total harmonic distortion  
BASS................................................................ 10 dB (at 100 Hz)  
TREBLE ............................................................ 10 dB (at 10 kHz)  
MONO (1 kHz, 75 kHz dev) .......................... 0.5% (65 dBf input)  
STEREO (1 kHz, 67.5 + 6.75 kHz dev) ......... 0.7% (65 dBf input)  
Signal to noise ratio  
MONO (1 kHz, 75 kHz dev) ........................ 75 dB (65 dBf input)  
STEREO (1 kHz, 67.5 + 6.75 kHz dev) ....... 68 dB (65 dBf input)  
Stereo separation (1 kHz) ........................................................... 40 dB  
Selectivity ( 400 kHz) (VR-6050) ............................................... 70 dB  
(KRF-V7060D/V6060D).......................... 50 dB  
For other countries (except for the U.K.)  
AUDIO section (KRF-V7060D/V6060D)  
Effective power output during STEREO operation  
1 kHz, 10 %, 8 Ω ......................................................... 110 W + 110 W  
Rated power output during STEREO operation  
Frequency response (30 Hz ~ 15kHz) ..................... +0.5 dB, 3.0 dB  
100 watts per channel minimum RMS, both channels driven,  
at 8 from 20 Hz to 20 kHz with no more than 0.09% total  
harmonic distortion. (FTC)  
AM tuner section  
Tuning frequency range  
10 kHz step ................................ 530 kHz ~ 1,700 kHz (VR-6050)  
10 kHz step .......... 530 kHz ~ 1,610 kHz (KRF-V7060D/V6060D)  
9 kHz step ............ 531 kHz ~ 1,602 kHz (KRF-V7060D/V6060D)  
Usable sensitivity (30% mod, S/N 20 dB)  
Effective power output during SURROUND operation  
FRONT (1 kHz, 10 % T.H.D. at 8 one channel driven)  
............................................................................... 110 W + 110 W  
CENTER (1kHz, 10 % T.H.D. at 8 one channel driven)  
.............................................................................................. 110 W  
SURROUND (1 kHz, 10 % T.H.D. at 8 one channel driven)  
............................................................................... 110 W + 110 W  
Total harmonic distortion ........................ 0.009% (1 kHz, 50 W, 8 )  
Frequency response  
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)  
................................................. 10 Hz ~ 100 kHz, +0 dB ~ 3.0 dB  
PHONO RIAAresponse (KRF-V7060D)  
.................................................. 40 Hz ~ 20 kHz, 1.5 dB ~ 3.0 dB  
Maximum input level  
PHONO (MM) (KRF-V7060D)........... 45 mV, 1 % T.H.D. at 1 kHz  
Signal to noise ratio (IHF66)  
PHONO (MM) (KRF-V7060D)............................................... 75 dB  
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)  
............................................................................................... 95 dB  
Loudness control  
VOLUME at 30 dB level ...................................... +6 dB (100 Hz)  
Input sensitivity / impedance  
PHONO (MM) (KRF-V7060D)............................... 6.0 mV / 47 kΩ  
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)  
.............................................................................. 500 mV / 47 kΩ  
Output level / impedance  
........................................................................16 µV / (600 µV/m)  
Signal to noise ratio (30% mod, 400 Hz)  
.......................................................... 50 dB (60 dBµ VEMF input)  
GENERAL  
Power consumption VR-6050 ....................................................... 3 A  
KRF-V7060D/V6060D ............................ 300 W  
AC outlet  
SWITCHED VR-6050 ..................... (total 150 W, 1.25 A max.)  
KRF-V7060D/V6060D .............. (total 90 W max.)  
Dimensions..................................................... W : 440 mm (17-5/16")  
H
D
: 159 mm (6-1/4")  
: 392 mm (15-7/16")  
Weight (Net)  
VR-6050 ................................................................ 9.4 kg (20.7 lb)  
KRF-V7060D/V6060D ......................................... 10.0 kg (22.0 lb)  
TAPE REC ............................................................... 500 mV / 1 kΩ  
PRE OUT (SURROUND BACK CHANNEL) ............... 2.5 V / 1 kΩ  
PRE OUT (SUBWOOFER) .......................................... 2.5 V / 1 kΩ  
EN  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
For the U.K. only  
AUDIO section (KRF-V6060D)  
VIDEO section  
Rated power output during STEREO operation  
VIDEO inputs / outputs  
VIDEO (composite) ................................................. 1 Vp-p / 75 Ω  
S VIDEO inputs /outputs  
DIN/IEC (63 Hz ~ 12.5 kHz, 0.09 % T.H.D. at 6 )  
............................................................................... 100 W + 100 W  
Effective power output during SURROUND operation  
S VIDEO (luminance signal)................................... 1 Vp-p / 75 Ω  
S VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75 Ω  
FRONT (63 Hz ~ 12.5 kHz, 0.09 % T.H.D. at 6 one channel  
driven) ................................................................... 100 W + 100 W  
CENTER (63 Hz ~ 12.5 kHz, 0.09 % T.H.D. at 6 one channel  
driven) ..................................................................................... 100 W  
SURROUND (63 Hz ~ 12.5 kHz, 0.7 % T.H.D. at 6 one channel  
driven)............................................................................ 100 W + 100 W  
Total harmonic distortion .......................0.009 % (1 kHz, 50 W, 6 )  
Frequency response  
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)  
................................................. 10 Hz ~ 100 kHz, +0 dB ~ 3.0 dB  
PHONO RIAAresponse ..............40 Hz ~ 20 kHz, +1.5 dB ~ 3.0 dB  
Maximum input level  
PHONO (MM) ....................................45 mV, 1 % T.H.D. at 1 kHz  
Signal to noise ratio (IHF66)  
PHONO (MM) ........................................................................ 75 dB  
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)  
............................................................................................... 95 dB  
Loudness control  
FM tuner section  
Tuning frequency range.....................................87.5 MHz ~ 108 MHz  
Usable sensitivity  
MONO............ 1.3 µV (75 )/ 13.2 dBf (40 kHz dev, S/N 26 dB)  
STEREO .... 45 µV (75 )/ 42.1 dBf (40 + 6 kHz dev, S/N 46 dB)  
Total harmonic distortion  
MONO (1 kHz, 40 kHz dev) ....................... 0.2% (65.2 dBf input)  
STEREO (1 kHz, 40 + 6 kHz dev) ............... 0.8% (65.2 dBf input)  
Signal to noise ratio (DIN weighted at 1 kHz)  
MONO........................................................ 65 dB (65.2 dBf input)  
STEREO ..................................................... 60 dB (65.2 dBf input)  
Stereo separation (1 kHz) ........................................................... 36 dB  
Selectivity ( 300 kHz) ................................................................. 64 dB  
Frequency response (30 Hz ~ 15kHz) ..................... +0.5 dB, 3.0 dB  
VOLUME at 30 dB level ...................................... +6 dB (100 Hz)  
Input sensitivity / impedance  
PHONO (MM) ........................................................ 6.0 mV / 47 kΩ  
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)  
.............................................................................. 500 mV / 47 kΩ  
Output level / impedance  
TAPE REC ............................................................... 500 mV / 1 kΩ  
PRE OUT (SURROUND BACK CHANNEL) .............. 2.5 V / 1 kΩ  
PRE OUT (SUBWOOFER) ......................................... 2.5 V / 1 kΩ  
Tone control  
MW tuner section  
Tuning frequency range..................................... 531 kHz ~ 1,602 kHz  
Usable sensitivity (30% mod, S/N 20 dB) .........16 µV / (600 µV/m)  
Signal to noise ratio (400 Hz, 30% mod)  
.......................................................... 50 dB (60 dBµ VEMF input)  
BASS................................................................ 10 dB (at 100 Hz)  
TREBLE ............................................................ 10 dB (at 10 kHz)  
GENERAL  
Power consumption ................................................................. 330 W  
AC outlet  
DIGITAL AUDIO section  
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz  
Input level / impedance / wave length  
SWITCHED ...................................................... (total 90 W max.)  
Dimensions..................................................... W : 440 mm (17-5/16")  
H
D
: 159 mm (6-1/4")  
: 392 mm (15-7/16")  
Optical ........................... (15 dBm ~ 24 dBm), 660 nm 30 nm  
Coaxial................................................................... 0.5 Vp-p / 75 Ω  
Weight (Net)................................................................ 9.8 kg (21.6 lb)  
Notes  
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.  
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).  
EN  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For your records  
Record the serial number, found on the back of the unit, in the spaces  
designated on the warranty card, and in the space provided below. Refer  
to the model and serial numbers whenever you call upon your dealer for  
information or service on this product.  
Model__________________ Serial Number________________________  
EN  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Intel Computer Hardware BLKDH61BF User Manual
JBL Speaker L8400P User Manual
Jet Tools Cordless Sander J 4200A User Manual
John Deere Lawn Mower JS46 User Manual
JVC Stereo Receiver KS F185 User Manual
Keys Fitness Home Gym CM560 User Manual
KitchenAid Refrigerator W10310148A User Manual
Klaxon Home Security System Syrex IS XN User Manual
Klipsch Portable Speaker R 5650 S User Manual
Kolcraft Stroller S51 T User Manual