Kenwood Stereo Receiver KRF V4530D User Manual

AUDIO VIDEO SURROUND RECEIVER  
KRF-V7030D  
KRF-V6030D  
KRF-V5030D  
KRF-V4530D  
P
INSTRUCTION MANUAL  
KENWOOD CORPORATION  
O
This instruction manual is used to describe multiple models listed above.  
Model availability and features (functions) may differ depending on the country and  
sales area.  
About the supplied remote control (RC-R0610)...  
Compared to standard remote controls, the remote control supplied with this receiver has several operation  
modes. These modes enable the remote control to control other audio/video components. In order to  
effectively use the remote control it is important to read the operating instructions and obtain a proper  
understanding of the remote control and how to switch its operation modes (etc.).  
Using the remote control without completely understanding its design and how to switch the operation modes  
may result in incorrect operations.  
O
R
B60-4602-00 02 MA (E2, T)  
9909  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before applying the power  
Contents  
Caution:Readthepagesmarked  
operation.  
Maintenance of the unit  
3
When the front panel or case becomes dirty, wipe with a soft, dry  
cloth. Do not use thinner, benzine, alcohol, etc. for these agents may  
cause discoloration.  
carefullytoensuresafe  
Before applying the power ................... 2  
Safety precautions .............................................. 2  
Unpacking .......................................................... 2  
How to use this manual ...................................... 4  
Special features .................................................. 4  
Names and functions of parts ................ 5  
Setting up the system ......................... 8  
Connecting audio components........................... 8  
Connecting video components ........................... 9  
Connecting a DVD player.................................... 9  
Digital connections ........................................... 10  
Connecting to the AUX IN jacks  
In regard to contact cleaner  
Do not use contact cleaners because it could cause a malfunction.  
Be specially careful not to use contact cleaners containing oil, for  
they may deform the plastic component.  
Preparations  
P
(KRF-V7030 only) .............................................. 11  
Connecting the antennas .................................. 11  
Connecting the system control ......................... 12  
Connecting the speakers .................................. 13  
Preparing the remote control ............................ 14  
Preparing for surround sound ............... 15  
Speaker settings ............................................... 15  
Normal playback .............................. 16  
Preparing for playback ...................................... 16  
Listening to a source component ..................... 17  
Adjusting the sound .......................................... 17  
Recording ...................................... 18  
Recording audio (analog sources) .................... 18  
Recording video................................................ 19  
Recording audio (digital sources) ...................... 19  
Listening to radio broadcasts ............... 20  
Tuning (non-RDS) radio stations ....................... 20  
Using RDS (Radio Data System) ....................... 20  
Using the DISPLAY key .................................... 21  
Presetting RDS stations  
O
Operations  
(RDS AUTO MEMORY) ..................................... 21  
Presetting radio stations manually .................... 22  
Receiving preset stations .................................. 22  
Receiving preset stations in order (P.CALL)...... 22  
Tuning by program type (PTY search) .............. 23  
Ambience effects.............................. 24  
Surround modes ............................................... 24  
Surround play ................................................... 25  
DVD 6-channel playaback ................................ 26  
Convenient functions ........................................ 27  
O
In case of difficulty ........................... 28  
Specifications ................................. 29  
Other  
Quick start guide ............................... 1  
Getting the most  
from your remote control ..................... 3  
Setup code chart ............................... 4  
In case of difficulty ............................ 5  
Remote operation of other components .... 6  
Remote  
Control  
(Separate  
booklet)  
R
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before applying the power  
How to use this manual  
Special features  
4
True home theater sound  
The manual covers the KRF-V7030D, KRF-V6030D, KRF-V5030D, and  
KRF-V4530D. Items such as functions, number of jacks, and remote  
control details differ somewhat between these models. To confirm the  
functions available on the model you have purchased, refer to the table  
below.  
This receiver incorporates a wide variety of surround modes to bring you  
maximum enjoyment from your video software. Select a surround mode  
according to your equipment or the software you are going to play and  
enjoy!  
¢
Terminal  
Remote  
Dolby Pro Logic & Dolby 3 Stereo  
M odelname  
Control  
Speakerout  
VIDEO 3jacks Frontinput  
This surround system reproduces theater-like surround sound from  
video software marked  
Preparations  
.
KRF-V7030D  
RC-R0610 2systems  
(A,B)  
Equipped  
Equipped  
The PRO LOGIC mode uses the built-in adaptive matrix circuit to steer  
the Left, Center, Right and Surround channel audio signals.  
The 3 STEREO mode will redirect the Surround signal to the front left  
and right speakers when only the front and center speakers are used.  
KRF-V6030D  
RC-R0610 2systems  
(A,B)  
Notequipped  
Notequipped  
Notequipped  
Notequipped  
KRF-V5030D  
KRF-V4530D  
RC-R0510 1system  
Dolby Digital (AC-3)  
The DOLBY DIGITAL (AC-3) mode lets you enjoy full digital surround  
from software processed in the Dolby Digital (AC-3) format. Dolby  
Digital (AC-3) provides up to 5.1 channels of independent digital audio  
for better sound quality and more powerful presence than conventional  
Dolby Surround.  
This manual is divided into four sections, Preparations, Operations, Other,  
and Remote Control.  
Preparations  
Shows you how to connect your audio and video components to the  
receiver and prepare the surround processor.  
We've tried to make setting up your system as easy as possible. However,  
since this receiver works with all of your audio and video components,  
connecting the system can be fairly complex.  
DTS (KRF-V7030D only)  
DTS (Digital Theater System) is a 5.1 channel digital audio format that  
provides five full-spectrum channels and one low-frequency (subwoofer)  
channel for unprecedented clarity, optimum channel separation and a  
(wide) dynamic range.  
In the DTS mode, the 5.1 channel digital input from a DTS CD, LD or  
DVD disc (carrying the “DTS” marking) can be played in Digital Sur-  
round.  
Operations  
Shows you how to operate the various functions available from the  
receiver.  
Important:  
When a DTS disc is played on a CD, LD or DVD player, noise may be  
output from the analog output. It is recommended that you connect the  
digital output of the player to the digital input of this unit.  
Other  
Shows you additional information such as “In case of difficulty” (trouble-  
shooting) and “Specifications”.  
DVD 6-channel input  
If you own a DVD player equipped with 6-channel output, this receiver  
allows you to obtain the full surround sound impact of DVD source  
material featuring multi-channel encoding. Since the source signals are  
digital and each channel is input independently, the resulting ambience  
is far superior to what can be achieved with conventional surround  
sound systems.  
Remote Control (Separate booklet) (KRF-V7030D/KRF-  
V6030D only)  
Includes the “Quick Start Guide,” which shows you how to operate other  
components using the remote control, as well as a detailed explanation  
of all remote control operations. Once you have registered your compo-  
nents with the proper setup codes, you’ll be able to operate both this  
receiver and your other AV components (TV, VCR, DVD player, LD player,  
CD player, etc.) using the remote control supplied with this receiver.  
Universal IR (InfraRed) remote control (KRF-V7030D/KRF-  
V6030D only)  
In addition to the basic receiver, the remote control supplied with this  
receiver can also operate almost all of your remote controllable audio and  
video components. Just follow the simple setup procedure to register the  
components you have connected.  
RDS (Radio Data System) tuner  
The receiver is equipped with an RDS tuner that provides several  
convenient tuning functions: RDS Auto Memory, to automatically preset  
up to 40 RDS stations broadcasting different programs; station name  
display, to show you the name of the current broadcast station; and PTY  
search to let you tune stations by program type.  
PTY (Program TYpe) search  
Lets you tune stations by specifying the type of program you want to  
hear.  
Memory back up function  
Please note that the following items will be deleted from the unit's  
memory if the power cord is disconnected from the AC outlet for  
approximately 3 days.  
• Power mode.  
• Input selector settings.  
• Device preset.  
• Picture output.  
• Speaker ON/OFF  
• Volume level.  
• BASS, TREBLE, INPUT level.  
• Subwoofer ON/OFF.  
• Dimmer level.  
• MD/TAPE settings.  
• 6CH/2CH input setting.  
• Listen mode setting.  
• Speaker settings.  
• Input mode setting.  
• Midnight mode setting.  
• Broadcast band.  
• Frequency setting.  
• Preset stations.  
• Monitor ON/OFF.  
• Tuning mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names and functions of parts  
Frequency display,  
PRO LOGIC  
indicator  
Input display,  
Preset channel display,  
Surround mode display  
AUTO SOUND indicator  
Band indicators  
DIGITAL indicator  
S.DIRECT indicator  
5
Speaker indicators  
AUTO indicator  
FM AUTO SOUND DIGITAL  
AM PRO LOGIC S.DIRECT MEMO  
ST.  
TUNED  
AUTO  
SP  
A
B
MUTE  
L
LFE  
LS  
C
R
MEMO. indicator  
ST. indicator  
.
SW  
MHz 3 STEREO MONITOR  
kHz DOWN MIX 
RDS  
PTY  
S
RS  
MUTE indicator  
TUNED indicator  
DOWN MIX indicator  
RDS indicators  
MONITOR indicator  
Speaker selection indicators  
Input channel indicators  
Output channel indicators  
3 STEREO indicator  
STEREO indicator  
Display  
For KRF-V6030D,  
KRF-V5030D,  
KRF-V4530D  
P
MULTI CONTROL  
DOLBY  
DIGITAL  
PROLOGIC  
3
STEREO  
VOLUME CONTROL  
DOLBY  
DIGITAL  
STANDBY  
MULTI CONTROL  
DTS  
PROLOGIC  
3
STEREO  
DOWN MIX  
INPUT SELECTOR  
SET UP  
INPUT MODE  
DIMMER  
MONITOR  
SOUND  
BAND  
LISTEN MODE  
SOURCE DIRECT  
MEMORY  
ON/STANDBY  
POWER  
ON  
OFF  
A
SPEAKERS  
B
AUTO  
DOWN  
UP  
S-VIDEO  
V
AV AUX  
L
AUDIO  
R
PHONES  
For KRF-V7030D  
SPEAKER  
MUTE  
For  
KRF-V5030D,  
KRF-V4530D  
1 POW ER key  
Use to turn the main power ON/OFF.  
2 ON/STANDBY ( )key  
%
! SPEAKER key  
^
*
3STEREO indicator  
Lights when the receiver is in the 3 STEREO  
mode.  
DOW N M IX indicator  
(ForKRF-V7030D)  
Lights when the receiver is in the DOWN MIX  
mode.  
(ForKRF-V5030D/V4530D)  
Use to turn the speaker ON/OFF.  
M UTE key  
%
Use to switch the power ON/STANDBY when  
the POWER is turned ON.  
STANDBY indicator  
§
(ForKRF-V5030D/V4530D)  
Use to temporarily mute the sound.  
@ SOUND key  
Use to adjust the sound quality and ambience  
effects.  
# BAND key  
Use to select the broadcast band.  
$ AUTO key  
Use to select the auto tuning mode.  
% LISTEN M ODE key  
Use to select the listening mode.  
^ M EM ORY key  
Use to store radio stations in the preset memory.  
& SOURCE DIRECT key  
Use to pass the source material direct to the  
amplifier.  
* INPUT SELECTOR knob  
Use to select the input sources.  
( S VIDEO/AV AUX/AUDIO L/R  
jacks  
3 M ULTICONTROL knob  
(ForKRF-V7030D)  
Used to make a variety of settings.  
3 M ULTICONTROL keys  
(ForKRF-V6030D/V5030D/V4530D)  
Used to make a variety of settings.  
4 SETUP key  
%
6 INPUT M ODE key  
0
Use to switch between the digital and analog  
inputs.  
7 DIM M ER key  
Use to adjust the brightness of the display.  
Use to select the REC MODE.  
8 M ONITOR key  
Use to monitor the source that is connected to  
the VIDEO2/MONITOR jack.  
9 VOLUM E CONTROL knob  
0 PHONES jack  
Use for headphone listening.  
! SPEAKERS A/B keys  
(ForKRF-V7030D/V6030D)  
%
)
)
(¶  
%
Use to select the surround sound settings.  
5 Surroundindicators  
*
DTS indicator  
(ForKRF-V7030D)  
Lights when the receiver is in the DTS mode.  
DOLBY DIGITAL indicator  
Lights when the receiver is in the Dolby Digital  
mode.  
PROLOGIC indicator  
§
¡
&
*
*
^
&
!
Use to turn the A/B speakers ON/OFF.  
Lights when the receiver is in the PROLOGIC  
mode.  
(For KRF-V7030D)  
Standby mode  
While the standby indicator of the unit is lit, a small amount of current is flowing into the unit’s internal circuitry to back up the memory. This condition is  
referred to as the standby mode of the unit. While the unit is in the standby mode, it can be turned ON from the remote control unit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names and functions of parts  
Remote control unit (RC-R0610) (KRF-V7030D/V6030D)  
6
POWER  
1
1
4
7
0
2
5
3
6
9
!
@
POWER  
TV  
Preparations  
VCR/CDR  
8
RETURN  
LSTN.M  
DVD  
+10  
2
DISPLAY  
MENU  
OSD  
PTY  
#
SET UP  
SOUND  
3
4
CDR  
P.CALL  
P.CALL  
5
MULTI CONTROL  
CD  
$
%
^
&
*
(
ENTER  
AUTO  
BAND  
DVD  
TUNING  
6
A/B+100  
DISC SKIP  
RECEIVER TITLE  
B.BOOST  
7
8
Therearesomecasesinwhichkeys(orknobs)  
thathavethesamefunctiononthereceiverand  
ontheremotecontrolhavedifferentnames.In  
theinstructionsofthismanual,ifthenamesof  
correspondingkeys(orknobs)onthereceiver  
andremotecontrolaredifferent, thenameof  
theremotecontrolkeyisindicatedinparenthe-  
ses.  
INPUT SEL.  
TUNER  
PHONO  
CD/DVD  
MD/TAPE  
CHANNEL  
AV AUX  
9
TV SEL.  
VIDEO3  
VIDEO1  
VIDEO2  
)
¡
PagereferencessuchasRC6indicatepages  
intheremotecontroloperationmanual(Separate  
booklet).  
0
MUTE  
VOLUME  
RC-R0610  
1 Numerickeys  
RC1  
# RDS operationkeys  
¡£  
7 B.BOOST key  
&
Provide functions identical to those of the  
original remote control supplied with the  
component you are controlling.  
Use to receive RDS broadcasts.  
$ ENTER key  
Use to select the maximum adjustment set-  
ting for the low frequency range.  
RECEIVER key  
RC6  
Use to operate other components.  
2key  
If tape is selected as the input source, this  
key functions as the play key for side B of the  
cassette (the side facing away from the front  
of the deck).  
2 LSTN.M key  
Use to select the listening mode.  
RETURN key  
Use to return to the operation of the receiver.  
8 DISC SKIP key  
RC6  
RC7  
If CD is selected as the input source, this key  
functions as the multi-CD player disc skip key.  
Use to operate other components.  
3 SETUP key  
%
A/B key  
RC6  
Use to select the surround sound settings.  
M ENU key RC7  
% BAND key  
Use to select the broadcast band.  
)
If TAPE is selected as the input source, this  
(A and B) of a double cassette deck.  
+100key  
Use to select the disc number with the multi-  
CD player.  
Use to operate other components.  
4 SOUND key  
6key  
RC6  
If CD is selected as the input source, this key  
functions as the play/pause key.  
If MD is selected as the input source, this key  
functions as the play key.  
Use to adjust the sound quality and ambi-  
ence effects.  
TITLE key  
RC7  
OSD key  
RC7  
Use to operate other components.  
9 INPUTSELECTOR keys(DVD,PHONO,CD/  
Use to operate other components.  
5 M ULTICONTROL keys  
^ AUTO key  
Use to select the auto tuning mode.  
)
%
D V D , TU N ER, M D /TA PE, V ID EO 1,  
VIDEO2,VIDEO3,AV AUX)  
Used to make a variety of settings.  
Use to operate other components.  
P.CALL @/#keys  
7key  
RC6  
&
If CD or MD is selected as the input source,  
this key functions as the stop key.  
Selects the inputs and sets the remote con-  
trol to operate the component registered at  
the respective input.  
If tuner is selected as the input source, these  
keys function as P.CALL keys.  
& 8key  
Use to operate other components.  
* INPUT SEL.key RC6  
Use to operate other components.  
RC6  
0 M UTE key  
Use to temporarily mute the sound.  
! POW ER key  
*
4/¢keys  
RC6  
If CD or MD is selected as the input source,  
these keys function as skip keys.  
%
( CHANNEL %/keys  
Use to select the channel.  
) TV SEL.key  
RC7  
Use to turn the receiver on and off.  
@ POW ER key(TV,VCR/CDR,DVD)  
6 TUNING 1/¡keys  
RC2  
Use to operate the tuner or selected com-  
ponent.  
If CD or MD is selected as the input source,  
these keys function as search keys.  
RC7  
RC1  
Use to operate other components.  
¡ VOLUM E keys  
Use to turn the other components on and  
off.  
&
Use to adjust the receiver volume.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names and functions of parts  
Remote control unit (RC-R0510) (KRF-V5030D/V4530D)  
7
DVD playeroperation  
Press the DVD POWER key on the remote control for more than 2 seconds  
to turn on the connected KENWOOD DVD player. Press the DVD POWER  
key again to activate the DVD player operation mode.  
POWER  
1
4
7
2
5
3
6
9
1
0
!
@
DVD playeroperationkeys  
DVD  
TUNING  
P.CALL  
P.CALL  
POWER  
MULTI CONTROL  
8
¡(Search)  
1(Search)  
RECEIVER  
0
+10  
% (Cursor »)  
(Cursor «)  
@ (Cursor |)  
# (Cursor \)  
P
PTY  
MENU  
OSD LRISTEETNUMRODNE TITLE  
SET UP SOUND  
#
$
2
3
DISPLAY  
P.CALL  
1
4
7
0
2
5
3
6
9
P.CALL  
BAND  
DVD  
ENTER  
AUTO  
4
MULTI CONTROL  
BAND  
DVD  
ENTER  
%
^
&
*
TUNING  
8
5
6
8
7
(3 Play)  
(Pause)  
(Stop)  
A/B+100 AUTO  
BASS BOOST DISC SKIP  
+10  
6
7
ENTER (Enter)  
PHONO CD/DVD TUNER MD/TAPE  
Numerickeys  
8
VIDEO1 VIDEO2  
MUTE  
TITLE  
OSD  
MENU  
LRISTEETNUMRODNE  
SOUND  
SET UP  
DISPLAY  
9
M ENU  
(Menu)  
OSD  
(OSD menu)  
RETURN  
(Return)  
TITLE  
(Title)  
(
VOLUME  
RC-R0510  
1 Numerickeys  
7 DISC SKIP key  
$ LISTEN M ODE key  
Use to select the listening mode.  
RETURN key  
Use to operate other components.  
% ENTER key  
If CD or MD is selected as the input source,  
these keys function as numeric keys. If tuner  
is selected as the input source, these keys  
are used to call up station presets.  
If CD is selected as the input source, this key  
functions as the multi-CD player disc skip key.  
A/B key  
If TAPE is selected as the input source, this  
(A and B) of a double cassette deck.  
+100key  
2 SETUP key  
%
Use to operate other components.  
2key  
If tape is selected as the input source, this key  
functions as the play key for side B of the  
cassette (the side facing away from the front of  
the deck).  
Use to select the surround sound settings.  
M ENU key  
Use to operate other components.  
3 SOUND key  
Use to select the disc number with the multi-  
CD player.  
8 INPUTSELECTOR keys(DVD,PHONO,CD/  
Use to adjust the sound quality and ambi-  
ence effects.  
OSD key  
D V D , TU N ER, M D /TA PE, V ID EO 1,  
VIDEO2)  
Selects the inputs and sets the remote con-  
trol to operate the component registered at  
the respective input.  
&
^ BAND key  
Use to select the broadcast band.  
6key  
)
Use to operate other components.  
4 M ULTICONTROL keys  
Used to make a variety of settings.  
P.CALL @/#keys  
%
If CD is selected as the input source, this key  
functions as the play/pause key.  
If MD is selected as the input source, this key  
functions as the play key.  
9 M UTE key  
Use to temporarily mute the sound.  
*
If tuner is selected as the input source, these  
keys function as P.CALL keys.  
4/¢keys  
0 POW ER (  
)key  
%
Use to turn the receiver on and off.  
! DVD POW ER key  
& AUTO key  
Use to select the auto tuning mode.  
7key  
If CD or MD is selected as the input source, this  
key functions as the stop key.  
* 8key  
Use to operate other components.  
( VOLUM E keys  
)
If CD or MD is selected as the input source,  
these keys function as skip keys.  
5 TUNING 1/¡keys  
Used to operate DVD player.  
For details, refer to the instruction manual of  
your DVD player.(Press the DVD key for  
more than 2 seconds.)  
If tuner is selected as the input source, these  
keys function as tuning keys.  
If CD or MD is selected as the input source,  
these keys function as search keys.  
@ RECEIVER key  
Use to return to the operation of the receiver.  
# TITLE key  
&
Use to adjust the receiver volume.  
6 BASS BOOST key  
&
Use to operate other components.  
Use to select the maximum adjustment set-  
ting for the low frequency range.  
RDS operationkeys  
Use to receive RDS broadcasts.  
¡£  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the system  
M akeconnectionsasshownbelow.  
Connecting audio components  
W henconnectingtherelatedsystem components,besuretoalsorefer  
to the instruction m anuals supplied with the com ponents you are  
connecting.  
8
ShapeofAC outlets  
Donotconnectthepowercordtoawalloutletuntilallconnectionsare  
completed.  
U. K.  
DTS disclaimer clause  
Other countries  
SYSTEM CONTROL  
jacks  
DTS Digital Surround™ is a discrete 5.1 channel digital audio format  
available on CD, LD, and DVD software which consequently cannot be  
decoded and played back inside most CD, LD, or DVD players. For this  
reason, when DTS-encoded software is played back through the analog  
outputs of the CD, LD, or DVD player, excessive noise will be exhibited.  
To avoid possible damage to the audio system, proper precautions  
should taken by the consumer if the analog outputs are connected  
directly to an amplification system. To enjoy DTS Digital Surround™  
playback, an external 5.1 channel DTS Digital Surround™ decoder  
system must be connected to the digital output (S/P DIF, AES/EBU, or  
TosLink) of the CD, LD or DVD player.  
@
Preparations  
ToAC walloutlet  
The only audio product model incorporating the DTS Digital Surround  
decoder is the KRF-V7030D.  
VIDEO2/M ONITOR  
jacks(KRF-V6030D/  
V 5030D /V 4530D  
only)  
You can connectan  
equalizerin M onitor  
mode,oravideocom-  
ponent in Video 2  
mode.  
L
VIDEO 2/MONITOR jacks (for KRF-V6030D/V5030D/V4530D)  
The receiver’s VIDEO 2/M ONITOR jacks can be used in two different  
ways. Make the appropriate setting for the component connected to the  
jack when the receiver is turned on.  
R
GND  
REC OUT  
PLAY IN  
REC OUT  
MONITOR  
AUDIO  
PLAY IN  
MD/TAPE1  
PHONO  
CD/DVD  
UseasaVIDEO 2jack  
You can connect a video deck or the like to these jacks and perform  
video playback and recording. The initial factory setting is “VIDEO 2.  
UseasaM ONITOR jack  
You can connect a cassette deck or the like to these jacks and make use  
of the deck’s monitoring function during recording. Alternately, you can  
connect a graphic equalizer to these jacks to apply compensation to the  
music signal.  
To use the VIDEO 2/M ONITOR jacks as M ONITOR jacks, hold down  
the M ONITOR key of the main unit for more two seconds so that the  
indication shown below appears.  
IN  
OUT  
Videocomponent,  
3headcassettedeck,or  
Graphicequalizer  
MONITOR  
*
OUT  
Cassettedeckor  
M D recorder  
IN  
MEMO  
STEREO MONITOR  
SP  
A
L
R
SW  
ST.  
OUT  
• At the same time the setting is switched to “MONITOR,” the audio input  
source switches to tuner and the video input source switches to VIDEO  
1.  
CD player  
• To switch the setting back to “VIDEO 2,” once again hold down the  
M ONITOR key for two seconds or more.  
OUT  
Notes  
1. Be sure to insert all connection cords securely. If their connections are  
imperfect, the sound may not be produced or noise may interfere.  
2. Be sure to remove the power cord from the AC outlet before plugging or  
unplugging any connection cords. Plugging/unplugging connection cords  
without disconnecting the power cord can cause malfunctions and may  
damage the unit.  
Recordplayer  
3. Do not connect power cords from components whose power consump-  
tion is larger than what is indicated on the AC outlet at the rear of this unit.  
Analog connections  
Audio connections are made using RCA pin cords. These cables transfer  
stereo audio signal in an “analog” form. This means the audio signal  
corresponds to the actual audio of two channels. These cables usually have  
2 plugs each end, one red for the right channel and one white for the left  
channel. These cables are usually packaged with the source unit, or are  
available at your local electronics retailer.  
W henyouconnectthevideocomponenttotheVIDEO2/M ONITOR jacks,  
connectthevideocord(yellow RCA pincords)oftheconnectedcomponent  
totheVIDEO2 IN jack(KRF-V6030D/V5030D/V4530D only).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the system  
Connecting video components  
Connecting a DVD player (6-channel input)  
9
If you have connected a DVD player to the receiver with digital connection,  
be sure to read the “Input mode settings” section on the following page  
carefully.  
SVideojacks  
(KRF-V7030D only)  
About the S VIDEO  
jacks  
PLAY IN  
REC OUT  
PLAY IN  
PLAY IN  
PLAY IN  
REC OUT  
S-VIDEO  
S
VIDEO  
DVD  
VIDEO 1  
VIDEO 1  
VIDEO 2  
VIDEO 3  
MONITOR  
Use the S VIDEO jacks to  
make connections to video  
components with S VIDEO  
IN/OUT jacks.  
PLAY IN  
CENTER  
DVD  
P
L
S VIDEO  
÷If you use the S VIDEO  
jacks to connect your video  
playback components, be  
sure to use the S VIDEO  
jacks when connecting your  
monitor and video record-  
ing components.  
DVD  
R
VIDEO  
2
FRONT  
SURROUND  
SUB WOOFER  
COAXIAL  
DVD/6ch INPUT  
S VIDEO  
cord  
VIDEO  
(KRF-V7030D only)  
(KRF-V7030D only)  
REC OUT  
PLAY IN  
PLAY IN  
VIDEO 2  
PLAY IN  
VIDEO 3  
VIDEO 1  
VIDEO  
DVD player  
S VIDEO  
OUT  
FRONT  
OUT L/R  
SURROUND  
OUT L/R  
CENTER OUT  
OUT  
OUT  
SUBWOOFER OUT  
DVD playerorLD player  
VIDEO OUT  
(Yellow RCA  
pin cord)  
COAXIAL  
DIGITAL  
OUT  
(AUDIO)  
OUT  
OUT  
DVD playerorLD player  
Toswitchthespeakersoff,presstheM UTE key.  
Videodeck  
OUT  
IN  
IN  
OUT  
Audio inputs and outputs  
Video inputs  
and outputs  
(Yellow RCA pin  
cords)  
M onitorTV  
VIDEO IN  
CAUTION  
Be sure to adhere followings. Or proper ventilation will be blocked  
causing damage or fire hazard.  
Video Inputs  
(Yellow RCA pin cord)  
• Install the KRF-V7030D/V6030D/V5030D/V4530D on the top of the  
system.  
• Do not place any objects impairing heat radiation onto the top of unit.  
• Leave a space around the unit (from the largest outside dimension  
including projection) equal or greater than, shown below.  
A videocomponentwithdigitalaudiooutputsshouldbeconnectedtothe  
VIDEO2orVIDEO3(KRF-V7030D only)jacks.  
Top panel : 50 cm  
Side panel : 10 cm  
Back panel : 10 cm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the system  
Digital connections  
Input mode settings  
10  
CD, DVD, VIDEO2 and VIDEO3 (KRF-V7030D only) inputs each  
include jacks for digital audio input and analog audio input.  
You must select beforehand which type of input is to be used for each  
connected component.  
Theinitialfactorysettingistousethedigitalaudiosignalforplayback(CD,  
DVD,VIDEO2,VIDEO3).  
The digital in jacks can accept DTS, Dolby Digital (AC-3), or PCM signals.  
Connect components capable of outputting DTS, Dolby Digital (AC-3), or  
standard PCM (CD) format digital signals.  
If you have connected any digital components to the receiver, be sure to  
read the “Input mode settings” section on this page carefully.  
To use the analog audio input for playback instead (if, for example, you  
have connected a VCR to the VIDEO2 or VIDEO3 input), you must set  
the input mode for the corresponding input to the analog mode.  
After completing connections and turning on the receiver, follow the  
steps below.  
OPTICAL DIGITAL OUT  
(AUDIO)  
Preparations  
CD player  
INPUT SELECTOR  
INPUT MODE  
DVD  
CD/DVD  
OPTICAL  
VIDEO 3  
OPTICAL  
1 Use the INPUT SELECTOR knob to select CD, DVD, VIDEO2, or  
VIDEO3.  
Optical  
fiber  
cable  
(KRF-V7030D only)  
2 PresstheINPUT M ODE key.  
VIDEO  
2
COAXIAL  
DIGITAL IN  
Eachpressswitchesthesettingasfollows:  
InDTS playmode(KRF-V7030D only)  
1 D-AUTO (digital input, auto sound)  
2 D-M ANUAL (digital input, manual sound)  
Optical  
fiber  
cable  
OPTICAL DIGITAL OUT  
(AUDIO)  
InDVD playmode  
1 D-AUTO (digital input, auto sound)  
2 D-M ANUAL (digital input, manual sound)  
3 6CH INPT (DVD 6CH input)  
ComponentwithaDTS,DolbyDigital,  
orPCM OPTICAL DIGITAL OUT  
4 ANALOG (analog input, manual sound)  
InothermodethanDTS orDVD playmode  
1 D-AUTO (digital input, auto sound)  
2 D-M ANUAL (digital input, manual sound)  
3 ANALOG (analog input, manual sound)  
Connect the video signal and analog  
audio signals to the VIDEO 3 jacks.  
(See "Connecting video components".)  
COAXIAL DIGITAL OUT  
(AUDIO)  
COAXIAL  
DIGITAL  
OUT  
Digitalinput:  
Select this setting to play digital signals from a DVD, CD, or LD player.  
ComponentwithaDTS,DolbyDigital,  
orPCM COAXIAL DIGITAL OUT  
(AUDIO)  
Analoginput:  
Select this setting to play analog signals from a cassette deck, VCR,  
or turntable.  
RF digitaldemodula-  
tor(DEM -9991D)  
(soldseparately)  
Connect the video signal and analog  
audio signals to the VIDEO 2 jacks.  
(See "Connecting video components".)  
Autosound:  
In the auto sound mode (AUTO SOUND indicator lights), the receiver  
selects the listening mode automatically during playback to match the  
type of input signal (Dolby Digital, PCM, DTS ) and the speaker setting.  
The initial factory setting is auto sound on.  
DOLBY DIGITAL RF  
OUT (AUDIO)  
To keep the receiver set to the currently selected listening mode, use  
the INPUT M ODE key to select “D-M ANUAL” (manual sound).  
However, even when this setting is selected, there may be cases in  
which the listening mode is selected automatically to match a Dolby  
Digital source signal depending on the combination of listening mode  
and source signal.  
PCM OUT  
LD player  
ToconnectanLD playerwithaDIGITAL RF OUT,connecttheLD player  
totheKENW OOD RF digitaldemodulator(DEM -9991D).  
Next,connecttheDIGITAL OUT jacksofthedemodulatortotheDIGITAL  
IN jacksofthereceiver.  
Connect the video signal and analog audio signals to the VIDEO2 or  
VIDEO3(KRF-V7030D only)jacks.(See"Connectingvideocomponents".)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the system  
Connecting to the AUX IN jacks (KRF-V7030D  
Connecting the antennas  
only)  
11  
AM loop antenna  
The supplied loop antenna is for use indoors. Place it as far as possible from  
the receiver, TV set, speaker cords and power cord, and adjust the direction  
for best reception.  
The AUX IN jacks are convenient for connection of video components  
such as a camcorders and video games.  
AM antenna terminal connections  
1 Pushlever.  
2 Insertcord.  
3 Returnlever.  
P
FM indoor antenna  
S VIDEO  
V
AV AUX L – AUDIO – R  
The supplied indoor antenna is for temporary use only. For stable signal  
reception we recommend using an outdoor antenna. Disconnect the indoor  
antenna when you connect one outdoors.  
FM outdoor antenna  
Lead the 75coaxial cable connected to the FM outdoor antenna into the  
room and connect it to the FM 75terminal.  
FM antenna terminal connections  
Insertcord.  
S VIDEO cord  
VIDEO OUT  
Attatch to the stand.  
Camcorder,otherVCR,video  
game,digitalcamera,or  
portableM D player  
AM  
AUDIO OUT  
S VIDEO OUT  
GND  
FM  
75  
AM loop antenna  
FM indoor antenna  
FM outdoor antenna  
Use an antenna  
adaptor  
(Commercially  
available)  
ToselectthesourceconnectedtotheAUX IN jacks,selectAV AUX by  
usingtheINPUT SELECTOR knob.  
&
・ W henyouconnecttheaudiosourcesuchastheM D player, youdonot  
needtoconnectthevideocable.  
・ W henyouconnecttheunitandthecomponentwiththeSVIDEO cord,you  
cangetbetterpicturequality.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the system  
Connecting the system control  
12  
Donotconnectasystem controlcordtoacassettedeckconnectedtothe  
VIDEO2/M ONITOR jacks.  
Connecting system control cords after connecting a KENW OOD audio  
component system lets you take advantage of convenient system control  
operations.  
This unit is com patible only with the [SL-16] mode. The system control  
operationisnotavailableiftheunitisconnectedinthe[XS8],[XS],or[XR]  
connectionmode.  
SYSTEM CONTROL OPERATIONS  
RemoteControl  
Lets you operate this unit with the system remote supplied with the  
receiver.  
Preparations  
If your component has the mode select switch, set the con-  
nected components to the [SL16] mode.  
AutomaticOperation  
When you start playback from a source component, the input selector  
on this unit switches to that component automatically.  
SynchronizedRecording  
Lets you synchronize recording with the start of playback when record-  
ing from CD, MD or analog discs.  
SYSTEM CONTROL  
cord  
SYSTEM CONTROL  
Registering setup codes for KENWOOD audio components  
(KRF-V7030D/V6030D only)  
EXAM PLE:[SL16]modeconnections  
The underlined portion represents the setting of the system control  
mode.  
• Once you finish making the system connections, be sure to register the  
appropriate setup code for each component.  
RC3  
• If you own remote controllable KENWOOD audio components that are  
not compatible with system control, registering the setup code en-  
ables you to control those components using the remote control  
supplied with this unit (without connecting system control cords). To  
register setup codes for your remote controllable KENWOOD audio  
components, see "Registering setup codes for other components".  
RC3  
[SL16]  
Receiver  
SYSTEM  
CONTROL  
cord  
Cassettedeck  
orM D recorder  
[SL16][XS][XS8][XR]  
[SL16][XS][XS8]  
[XS]  
CD player  
Recordplayer  
• In order to take advantage of the system control operations, the  
components must be connected to the correct jacks. To use a CD  
player it must be connected to the CD jacks. To use a cassette deck  
(or MD recorder) it must be connected to the MD/TAPE jacks. When  
using more than one CD player (etc.) only the one connected to the  
specified jacks may be connected for system control.  
• Some CD players and cassette decks are not compatible with the  
[SL16] system control mode. Do not make system connections with  
equipment that is not [SL16] compatible.  
• Some MD players are not system control compatible. You cannot  
make system control connections to this kind of equipment.  
Notes  
1. [SL16] equipment cannot be combined with [XR], [XS], and [XS8]  
equipment for system operations. If your equipment consists of this  
kind of combination, please do not connect any system control cords.  
Even without system control cords, normal operations can be carried  
out without effecting performance.  
2. Do not connect system control cords to any components other than  
those specified by KENWOOD. It may cause a malfunction and  
damage your equipment.  
3. Be sure the system control plugs are inserted all the way in to the  
system control terminals.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the system  
Connecting the speakers  
13  
1 Stripcoating.  
2 Loosen.  
1 Stripcoating.  
2 Pushthelever.  
3 Insert.  
4 Secure.  
3 Insertthecord.  
4 Returnthelever.  
P
• Never short circuit the + and – speaker cords.  
FrontSpeakersA  
• If the left and right speakers are connected inversely or the speaker  
cords are connected with reversed polarity, the sound will be unnatu-  
ral with ambiguous acoustic imaging. Be sure to connect the speak-  
ers correctly.  
The KRF-V5030D/  
Right  
Left  
V4530D are equipped  
with one-touch speaker  
terminals.  
They are arranged in the  
same manner as the  
speaker terminals of the  
KRF-V7030D/V6030D.  
Refer to the instructions  
on making connections  
to the KRF-V7030D/  
V6030D when making  
connections to the KRF-  
V5030D/V4530D.  
CenterSpeaker  
Speaker impedance  
After confirming the speaker impedance indications printed on the rear  
panel of the receiver, connect speakers with matching impedance  
ratings. Using speakers with a rated impedance other than that indi-  
cated on the rear panel of the receiver could result in malfunctions or  
damage to the speakers or receiver.  
FRONT SPEAKERS CENTER SPEAKERS  
RED (8 – 16) BLUE  
(8 – 16) GREEN  
L
C
R
+
+
-
FRONT  
CENTER  
SPEAKERS SPEAKER  
KRF-V5030D/V4530D  
KRF-V7030D/V6030D  
FRONT SPEAKERS  
(8 – 16)  
+
+
SUB WOOFER PRE OUT  
UsetheFRONT  
SPEAKERS B  
(8 – 16)  
SURROUND SPEAKERS  
ORANGE  
GRAY  
terminalsifyouwant  
toconnectasecond  
frontspeakersystem  
(exceptforKRF-  
V5030D/V4530D).  
Powered  
subwoofer  
Left  
Right  
SurroundSpeakers  
(Be sure to connect both  
surround speakers)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the system  
Preparing the remote control  
14  
Speaker placement  
Loading the batteries  
2 Insertthebatteries.  
1 Removethecover.  
Center speaker  
Subwoofer  
Preparations  
3 Closethecover.  
Front  
speaker  
Listening  
position  
1
2
Surround  
speaker  
Frontspeakers: Place to the front left and right of the listening position.  
Front speakers are required for all surround modes.  
Centerspeaker: Place front and center. This speaker stabilizes the sound  
image and helps recreate sound motion. Be sure to connect a center  
speaker when using the Dolby 3 Stereo mode.  
• Insert two AA-size (R6) batteries as indicated by the polarity markings.  
Surroundspeakers: Place to the direct left and right, or slightly behind,  
the listening position at even heights, approximately 1 meter above the  
ears of the listeners. These speakers recreate sound motion and  
atmosphere. Required for surround playback.  
Operation  
Subwoofer: Reproduces powerful deep bass sounds.  
When the STANDBY indicator is lit, the power turns ON when you press  
the POW ER key on the remote control. When the power comes ON, press  
the key you want to operate.  
• Although the ideal surround system consists of all the speakers listed  
above, if you don't have a center speaker or a subwoofer, you can  
divide those signals between the available speakers in the speaker  
settings steps to obtain the best possible surround reproduction from  
Operatingrange  
(Approx.)  
the speakers you have available.  
%
Remote sensor  
6 m  
Infraredraysystem  
• When pressing more than one remote control key successively, press  
the keys securely by leaving an interval of 1 second or more between  
keys.  
Notes  
1. The supplied batteries may have shorter lives than ordinary batteries due  
to use during operation checks.  
2. When the remote-controllable distance gets shorter than before, replace  
both batteries with new ones.  
3. Placing the remote sensor in direct sunlight, or in direct light from a high  
frequency fluorescent lamp may cause a malfunction.  
In such a case, change the location of the system installation to prevent  
malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing for surround sound  
6 Use the M ULTI CONTROL to select the appropriate center speaker  
setting.  
Speaker settings  
15  
To enable you to obtain optimum enjoyment from the receiver’s listening  
modes, make sure to complete the speaker settings (subwoofer, front,  
center, and surround speakers) as described below.  
IfyouselectedLRGasthefrontspeakerssetting.  
1 CNTR LRG (large):  
A large center speaker is connected to  
the receiver.  
2 CNTR NM L (normal): An average size center speaker is con-  
MULTI CONTROL  
nected to the receiver.  
KRF-V6030D/  
3 CNTR NO:  
No center speaker is connected to the  
receiver.  
V5030D/  
SET UP  
V4530D  
1 CNTR YES: A center speaker is connected to the  
receiver.  
2 CNTR NO: No center speaker is connected to the  
receiver.  
P
7 PresstheSET UP keytoacceptthesetting.  
• The surround speaker setting indication (SURR) appears.  
POWER  
SET UP  
ON/STANDBY  
8 Use the M ULTI CONTROL to select the appropriate surround speaker  
setting.  
IfyouselectedLRGasthecenterspeakersetting.  
1 SURR LRG (large):  
SET UP  
MULTI  
Large surround speakers are con-  
nected to the receiver.  
MULTI  
CONTROL  
2 SURR NM L (normal): Average size surround speakers are  
CONTROL  
connected to the receiver.  
3 SURR NO:  
No surround speakers are connected  
to the receiver.  
IfyouselectedotherthanLRGasthecenterspeakersetting.  
1 SURR YES: Surround speakers are connected to the re-  
RC-R0610  
RC-R0510  
ceiver.  
Turn on the power to this receiver by pressing POWER and  
ON/STANDBY key.  
1
2 SURR NO:  
No surround speakers are connected to the  
receiver.  
2Select a speaker system.  
1 PresstheSET UPkeytomakethesubwoofersettingindication(SUBW )  
appear.  
9 PresstheSET UP keytoacceptthesetting.  
• The receiver enters the speaker volume level adjustment mode.  
• In steps 3 and 4, indications appear only for the selected channels  
of the speakers that require adjusting.  
STEREO
SP  
A
L
R
SW  
2 UsetheM ULTI CONTROL toselecttheappropriatesubwoofersetting.  
3Adjust the volume levels for the speakers.  
Sit in your normal listening position and listen to the test tone. Adjust the  
1 SUBW YES:A subwoofer is connected to the receiver.  
2 SUBW NO: No subwoofer is connected to the receiver.  
volume levels for the speakers until all speakers seem to be equally loud.  
• When the setting "SUBW NO" is selected, the front speakers  
automatically are set to "Large" and the procedure skips to step 5.  
1 UsetheM ULTICONTROL toadjustthevolumewhenthetesttoneisbeing  
outputfrom thespeakerchanneltobeadjusted.  
3 PresstheSET UP keytoacceptthesetting.  
• The front speakers setting indication (FRNT) appears.  
The channel indication blinks while the test tone is being output.  
SP  
A
L
SW  
STEREO
SP  
A
L
R
SW  
4 Use the M ULTI CONTROL to select the appropriate front speakers  
setting.  
The test tone issues from the speakers for 2 seconds at a tim e in the  
followingsequence:  
Lch= Cch= Rch= RS = LS = SW = Lch  
• If you change the volume level settings for the speakers while listening  
to music, the settings referred to on this page are also changed.  
• If the speaker setting selects are changed, the speaker level settings  
are reset.  
1 FRNT NM L (normal): Average size front speakers are  
connected to the receiver.  
2 FRNT LRG (large):  
Large front speakers are con-  
nected to the receiver.  
5 PresstheSET UP keytoacceptthesetting.  
• The center speaker setting indication (CNTR) appears.  
2 PresstheSET UP key.  
• The receiver enters the mode for inputting the distance to the  
speakers.  
IfyouselectedNM Lasthefrontspeakerssetting.  
Continuedtonextpage  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing for surround sound  
Normal playback  
4Input the distance to the speakers.  
Preparing for playback  
16  
1 M easurethedistancefrom thelisteningpositiontoeachofthespeakers.  
Some preparatory steps are needed before starting playback.  
Jotdownthedistancetoeachofthespeakers.  
INPUT MODE  
Distance to front speakers:  
Distance to center speaker:  
Distance to surround speakers:  
____ feet (meters)  
____ feet (meters)  
____ feet (meters)  
ON/STANDBY  
AUTO  
2 UsetheM ULTICONTROL toselectthedistancetothefrontspeakers.  
Preparations  
The speaker indicator to be adjusted blinks.  
SP  
A
L
R
POWER  
SPEAKERS A/B  
INPUT SELECTOR  
• The  
in 1 foot (0.3 m) increments.  
Indication in feet  
Indication in meters  
Selecting the input mode  
3 PresstheSET UP key.  
If you have selected a component connected to the CD,DVD,VIDEO2,  
or VIDEO3 (KRF-V7030D only) jacks, make sure that the input mode  
setting is correct for the type of audio signal to be used.  
4 Repeatsteps2and3toinputthedistanceforeachofthespeakers.  
0
Selecting MD/TAPE  
Select the source name corresponding to the component connected to  
the MD/TAPE jacks. The initial factory setting is “TAPE”. To change the  
source name associated with the MD/TAPE jacks to “M D,” follow the  
steps below:  
5 Setupiscompletewhentheinputindicationreappears.  
SP  
A
L
R
Ope  
SW  
1 UsetheINPUT SELECTOR knobtoselectTAPEモ.  
Display when all speakers have been selected.  
2 HolddowntheAUTO keyformorethan2seconds.  
• The source indication changes to “M D”.  
• To return to the original indication, repeat the above procedure.  
• You also will need to change the name input to the remote control to  
• The speakers you selected appear on the display. Confirm that all  
the speakers have been correctly selected.  
M D”.  
RC1  
Selecting the speaker system (except for KRF-V5030D/  
V4530D)  
Input level adjustment (analog sources only)  
PresstheSPEAKERS A orB keytoselectthespeakersystem tobeused.  
If the input level of an analog source signal is too high, adjust the input  
level.  
A ON  
B ON  
: Sound from the speakers connected to the SPEAKERS A  
terminals on the rear panel.  
: Sound from the speakers connected to the SPEAKERS B  
terminals on the rear panel.  
1 UsetheINPUT SELECTOR knobtoselectthesourcewhoユsinputlevel  
youwanttoadjust.  
A+B ON : Sound from both the speakers connected to the SPEAKERS  
A and B terminals on the rear panel.  
A+B OFF : No sound from the speakers. Use this setting when listening  
with headphones for stereo sound and virtual surround in all  
playback modes.  
• You can store a separate input level for each input source. If the  
MONITOR function is on, you can store an input level for when  
MONITOR is on independently of the input levels for the input  
sources.  
The indicator for the speakers  
2 PresstheSOUND keyseveraltimesuntiltheINPUTindicationappears.  
3 UsetheM ULTICONTROL toadjusttheinputlevel.  
The speaker indicator lights.  
you want to use should be lit.  
SP  
A
B
SP  
A
B
L
R
L
R
SW  
SW  
SP  
A
L
R
KRF-V7030D/V6030D  
KRF-V5030D/V4530D  
• Activating a surround mode or selecting “DVD/6ch” as the input  
source causes speaker system A to be selected automatically.  
• The adjustment mode is displayed for approximately eight seconds.  
• The input level may be adjusted to any one of three settings: 0,  
-3, and -6. (The initial setting is 0.)  
OntheKRF-V5030D/V4530D,presstheSPEAKER keytoswitchthespeak-  
ersonandoff.  
4 PresstheSOUND keytoreturntotheinputindication.  
Turning on the receiver  
1 Turnonthepowertotherelatedcomponents.  
2 TurnonthepowertothisreceiverbypressingPOW ER andON/STANDBY  
keys.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Normal playback  
Listening to a source component  
Adjusting the sound  
17  
VOLUME CONTROL  
INPUT SELECTOR  
MULTI CONTROL  
SOURCE DIRECT  
SOUND  
KRF-V6030D/  
V5030D/  
V4530D  
SPEAKERS A/B  
VOLUME CONTROL  
PHONES  
SOUND  
SOUND  
INPUT  
SELECTOR  
INPUT  
SELECTOR  
MULTI  
CONTROL  
MULTI  
CONTROL  
B.BOOST  
BASS BOOST  
VOLUME  
VOLUME  
MUTE  
MUTE  
RC-R0610  
RC-R0510  
VOLUME  
VOLUME  
RC-R0610  
RC-R0510  
Use the INPUT SELECTOR to select the source you want to  
listen to.  
1
Adjusting the tone  
Theinputsourceschangeasshownbelow:  
You can adjust the sound quality when the receiver is in the PCM stereo  
and analog stereo mode.  
SelectingasourceusingtheINPUT SELECTOR knob  
KRF-V7030D  
1 PresstheSOUND keytoselectthetonemodetobeadjusted.  
O
1 "PHONO"  
2 "TUNER"  
BASS: Select this to adjust the low frequency range.  
(Press the SOUND key once.)  
TREB: Select this to adjust the high frequency range.  
(Press the SOUND key twice.)  
3 "CD/DVD"  
4 "TAPE"or"M D"  
5 "VIDEO1"  
6 "VIDEO2"  
7 "VIDEO3"  
8 "DVD/6ch"  
9 "AV AUX"  
STEREO
SP  
A
L
R
SW  
KRF-V6030D/V5030D/V4530D  
2 UsetheM ULTICONTROL toadjustthesoundquality.  
1 "PHONO"  
2 "TUNER"  
• The bass and treble levels are adjustable from -10 to +10 in 2 step  
increments.  
3 "CD/DVD"  
4 "TAPE"or"M D"  
5 "VIDEO1"  
6 "VIDEO2"  
7 "DVD/6ch"  
• The adjustment item is displayed for approximately 8 seconds.  
Once-touch low frequency emphasis (bass boost)  
You can adjust the sound quality when the receiver is in the PCM stereo  
and analog stereo mode.  
PresstheB.BOOST (BASS BOOST)key.  
2Start playback from the selected source.  
• Press the key once to select the maximum (+10) low frequency  
emphasis setting.  
• This key does not function when the receiver is in the sound quality or  
ambience effects adjustment mode.  
Use the VOLUME CONTROL knob (VOLUME keys) to adjust  
the volume.  
3
Switching back to the previous setting  
Selecting VIDEO 2/MONITOR (except for KRF-V7030D)  
PresstheB.BOOST (BASS BOOST)keyagain.  
Depending on the component connected to the VIDEO 2/M ONITOR  
jacks, select either the “VIDEO 2” setting or the “M ONITOR” setting, as  
appropriate.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Normal playback  
Recording audio (analog sources)  
18  
Muting the sound  
The M UTE key lets you mute the sound of the speakers.  
MONITOR  
PresstheM UTE key.  
SP  
A
MUTE  
L
R
SW  
Blinks  
INPUT SELECTOR  
To cancel  
PresstheM UTE keyagainsothattheM UTEindicatorgoesoff.  
• Muting can also be canceled by adjusting the volume.  
Recording a music source  
W henrecordingamusicsource,switchtheVIDEO2/M ONITOR settingtoメ  
M ONITORモ(KRF-V6030D/V5030D/V4530D only).  
8
SOURCE DIRECT playback (analog sources only)  
Use this function to pass the source material direct to the amplifier,  
bypassing any audio processing.  
1 UsetheINPUT SELECTOR knobtoselectthesource(otherthanM D/  
TAPEモ)youwanttorecord.  
PresstheSOURCE DIRECT key.  
2 Setthecassettedecktorecord.  
S.DIRECT
3 Startplayback,thenstartrecording.  
• When you press the LISTEN M ODE, SOUND, or SETUP keys, or  
switch to another input source, SOURCE DIRECT playback will be  
canceled.  
Recording tapes  
W henrecordingamusicsource,switchtheVIDEO2/M ONITOR settingtoメ  
Operations  
M ONITORモ(KRF-V6030D/V5030D/V4530D only).  
8
To cancel  
PresstheSOURCE DIRECT keyagain.  
M ONITOR = M D/TAPE recording  
1 PresstheM ONITOR key.  
• If SOURCE DIRECT playback was activated when using a surround  
mode, cancelling it reactivates the previous surround mode.  
STEREO MONITOR  
Listening with headphones  
2 Use the INPUT SELECTOR knob to select a source other than メM D/  
TAPE.モ  
1 (KRF-V7030D/V6030D)  
PresstheSPEAKERS A orB keysothatthespeakerindicatorgoesoff.  
3 StartplaybackonthecassettedeckconnectedtotheM ONITOR jacksand  
startrecordingonthecassettedeckconnectedtotheM D/TAPE jacks.  
(KRF-V5030D/V4530D)  
PresstheSPEAKER keysothatthespeakerindicatorgoesoff.  
Make sure the SPEAKERS  
indicators are turned off.  
Make sure the SP indicators  
are turned off.  
M D/TAPE = M ONITOR recording  
SP  
A
SP  
A
1 UsetheINPUT SELECTOR knobtoselectメM D/TAPE.モ  
2 StartplaybackonthecassettedeckconnectedtotheM D/TAPE jacksand  
startrecordingonthecassettedeckconnectedtotheVIDEO2/M ONITOR  
jacks.  
KRF-V7030D/V6030D  
KRF-V5030D/V4530D  
• To copy tapes using a double cassette deck, refer to the instruction  
manual of the double cassette deck.  
• If you turn off all of the speakers when in the surround mode, the  
mode is cancelled as well, resulting in stereo playback.  
• The speakers do not switch off during the 6CH INPUT mode.  
Select the other input mode.  
0
MONITOR function (analog sources only)  
You can connect a cassette deck or graphic equalizer to the VIDEO2/  
M ONITOR jacks of the receiver. If a graphic equalizer is connected, the  
M ONITOR key should be left in the on position. Alternately, if a cassette  
deck equipped with a 3-head system is connected to the VIDEO2/  
M ONITOR jacks, you will be able to monitor the just-recorded signal  
while making recordings on the cassette deck. By switching the M ONI-  
TOR key on and off, you can compare the sound of the source signal and  
the just-recorded signal. For more information, refer to the instruction  
manual of the connected component.  
2 ConnectheadphonestothePHONES jack.  
PHONES  
3 UsetheVOLUM E CONTROL (VOLUM E)toadjustthevolume.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Recording video  
19  
Recording music in M-REC MODE  
1 UsetheINPUT SELECTOR toselectthevideosource(otherthanVIDEO1  
)youwanttorecord.  
DIMMER  
2 SetthevideodeckconnectedtoVIDEO 1torecord.  
• Select the REC MODE to record a digital input source.  
3 Startplayback,thenstartrecording.  
• With certain video software, recording may not be normal due to the  
copy guard condition.  
Recording audio (digital sources)  
INPUT SELECTOR  
Switch on the REC M ODE to record a digital input source.  
Usually use the A-REC M ODE to record audio input sources.  
1 Usetheinputselectortoselectthesource(CD,DVD,VIDEO2,orVIDEO3)  
youwanttorecord.  
When the digital mode changes during recording in the A-REC M ODE, the  
audio may be interrupted momentarily. To record the audio from the  
beginning of the digital mode change, use the M -REC M ODE.  
With a model that is not compatible with DTS, no audio is reproduced even  
when the DTS signals are input.  
2 Setthecassettedecktorecord.  
3 Playthesourcetoberecorded.  
4 PressandholdtheDIM M ER keyformorethan2secondstoselecttheM -  
REC M ODE.  
Recording music in A-REC MODE  
• The mode changes every 2 seconds as shown below.  
DIMMER  
1REC M ODE off:  
2A-REC M ODE :  
Thedigitalinputrecordmodeisswitched  
off.  
The digital input signals (DTS, Dolby  
DigitalorPCM )areidentifiedautomati-  
cally and converted into stereo signals  
thatarereadyforrecording.  
Theinputsignaltypeatthemomentthis  
modeisselectedisheldthroughoutthis  
mode.  
3M -REC M ODE :  
O
INPUT SELECTOR  
1 UsetheINPUT SELECTOR toselectthesource(CD,DVD,VIDEO2,or  
VIDEO3)youwanttorecord.  
PRO LOGIC 
STEREO
2 Setthecassettedecktorecord.  
3 PressandholdtheDIM M ER keyformorethan2secondstoselecttheA-  
REC M ODE.  
PRO LOGIC 
STEREO
• The mode changes every 2 seconds as shown below.  
5 Playthesourcefrom thebeginningandstartrecording.  
1REC M ODE off:  
2A-REC M ODE :  
Thedigitalinputrecordmodeisswitched  
off.  
• If the audio reproduction stops in the middle due to change in the  
input signals, etc., press the DIM M ER key.  
The digital input signals (DTS, Dolby  
Digital,orPCM )areidentifiedautomati-  
cally and converted into stereo signals  
thatarereadyforrecording.  
Theinputsignaltypeatthemomentthis  
modeisselectedisheldthroughoutthis  
mode.  
3M -REC M ODE :  
PRO LOGIC 
STEREO
PRO LOGIC 
STEREO
4 Startplayback,thenstartrecording.  
• If the audio reproduction stops in the middle due to change in the  
input signals, etc., press the DIM M ER key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to radio broadcasts  
Tuning (non-RDS) radio stations  
Using RDS (Radio Data System)  
20  
RDS is a system that transmits useful information (in the form of digital  
data) for FM broadcasts along with the broadcast signal. Tuners and  
receivers designed for RDS reception can extract the information from the  
broadcast signal for use with various functions, such as automatic display  
of the station name.  
Radio stations can be classified into RDS (Radio Data System) stations  
and other stations. To listen to or store RDS stations in the preset memory,  
see the section entitled, "Using RDS".  
MULTI CONTROL  
KRF-V6030D/  
V5030D/  
V4530D  
INPUT SELECTOR  
RDS functions:  
PTY (Program TypeIdentification)Search  
£
Automatically tunes to a station that is currently broadcasting the  
specified program type (genre).  
PS (Program ServiceName)Display  
Automatically displays the station name transmitted by the RDS station.  
BAND AUTO  
RDS AutoM emoryfunction  
¡
Automatically selects and stores up to 40 RDS stations in the preset  
memory.  
If fewer than 40 RDS stations have been stored in the preset memory,  
regular FM stations will be stored in the remaining places.  
MULTI  
MULTI  
CONTROL  
CONTROL  
BAND  
AUTO  
BAND  
AUTO  
Radiotextfunction  
Displays the radio text data transmitted by some RDS stations when you  
press the DISPLAY key. There is no display if no text data was  
transmitted.  
TUNER  
TUNER  
RC-R0610  
RC-R0510  
The "RDS" indicator lights up when an RDS broadcast (signal) is  
received.  
Operations  
FM
MHz STEREO
AUTO  
SP  
RDS
A
L
R
SW  
ST.  
TUNED  
Use the INPUT SELECTOR or TUNER key to select the  
tuner.  
1
2Use the BAND key to select the desired broadcast band.  
Note  
Eachpressswitchestheband  
asfollows:  
"AM " or "FM " indicator  
Some functions and function names may differ for certain countries  
and areas.  
FM
AUTO  
1 FM  
2 AM  
MHz STEREO
Before using a function utilizing the RDS, be sure to perform the RDS  
Auto Memory operation by referring to the description in “Presetting  
3Use the AUTO key to select the desired tuning method.  
Eachpressswitchesthetuningmethodasfollows:  
"AUTO" indicator lights.  
RDS stations (RDS AUTO MEMORY)”.  
¡
1 AUTO lit(auto tuning)  
FM
AUTO  
2 AUTO notlit(manual tuning)  
MHz STEREO
• Normally, set to "AUTO" (auto tuning). If the radio waves are weak  
and there is a lot of interference, switch to manual tuning. (With  
manual tuning, stereo broadcasts will be received in monaural.)  
4 Use the MULTI CONTROL to select the station.  
Frequency  
display  
Lights when a broadcast is  
being received in stereo.  
FM
AUTO  
ST.  
MHz STEREO
TUNED  
"TUNED" is displayed  
when a station is received  
Autotuning  
:
The next station is tuned automatically.  
M anualtuning : Turn the knob (press the key) to select the  
desired station.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to radio broadcasts  
Using the DISPLAY key  
Presetting RDS stations (RDS AUTO MEMORY)  
21  
This function automatically stores up to 40 RDS stations in the preset  
memory. In order to use the PTY function, the RDS stations must be stored  
in the preset memory using the RDS AUTO MEMORY function.  
DISPLAY  
DISPLAY  
INPUT SELECTOR  
BAND  
RC-R0610  
RC-R0510  
AUTO MEMORY  
Pressing the DISPLAY key changes the contents of the  
display.  
Eachpressswitchesthedisplaymodeasfollows:  
1Use the INPUT SELECTOR to select the tuner.  
1 PS (Program Service name) display  
2 RT (Radio Text) display  
3 Frequencydisplay  
2Use the BAND key to set the broadcast band to “FM”.  
1 PS (Program Servicename)display:  
The station name is displayed automatically when an RDS broadcast  
is received,  
3Press and hold the MEMORY key for more than 2 seconds.  
SP  
A
If no PS data was sent, “NO PS” is displayed.  
L
R
SW  
STEREO
FM
STEREO
AUTO  
SP  
RDS
A
L
R
SW  
ST.  
TUNED  
O
STEREO
SP  
A
L
R
2 RT (RadioText)display:  
SW  
Text data accompanying the RDS broadcast scrolls across the dis-  
play. “NO RT” or “RT----” is displayed if the current RDS station does  
not provide RT data.  
• After a few minutes, up to 40 RDS stations are preset in order from  
channel "01".  
• Stations already stored in the preset memory may be replaced by  
RDS stations. (i.e., If the RDS AUTO MEMORY function finds 15 RDS  
stations, the stations currently preset at numbers 01~15 are replaced  
by the RDS stations.)  
FM
AUTO  
SP  
A
L
R
RDS
SW  
ST.  
STEREO
TUNED  
3 Frequencydisplay:  
Displays the frequency of the current station.  
FM
MHz STEREO
AUTO  
SP  
RDS
A
L
R
SW  
ST.  
TUNED  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to radio broadcasts  
Presetting radio stations manually  
22  
The RDS auto memory function assigns preset numbers to RDS stations  
starting from preset number "1". Therefore, be sure to execute the RDS  
auto memory function before using the following operations to manually  
store AM stations and other FM stations, and RDS stations.  
Enter the number of the preset you want to receive (up to  
"40").  
2
Pressthenumerickeysinthefollowingorder:  
“Presetting RDS stations (RDS AUTO MEMORY)”.  
¡
For"15",press ................0,5  
For"20",press ................0,0,)  
MULTI CONTROL  
• If you make a mistake entering a two digit number, press the +10key  
several times to return to the original display and start again.  
KRF-V6030D/  
V5030D/  
MEMORY  
V4530D  
FM
MEMO  
MHz STEREO
AUTO  
SP  
A
L
R
SW  
ST.  
TUNED  
Receiving preset stations in order (P.CALL)  
Tune to the station you want to store.  
1
2Press the MEMORY key while receiving the station.  
Blinks for 5 seconds  
Lights for 5 seconds  
FM
MEMO  
MHz STEREO
AUTO  
SP  
A
L
R
SW  
ST.  
TUNED  
P.CALL ¤ / ‹  
P.CALL ¤ / ‹  
Operations  
TUNER  
TUNER  
Proceedtostep3 within5seconds.  
(Ifmorethan5secondselapse,presstheM EM ORY keyagain).  
RC-R0610  
RC-R0510  
Use the MULTI CONTROL to select one of the station  
presets (1 – 40).  
3
1Press TUNER to select the tuner as the source.  
2Use the P.CALL keys to select the desired station.  
4Press the MEMORY key to accept the setting.  
• Repeat steps 1, 2, 3, and 4 to store as many stations as necessary.  
• If you store a station at a previously used preset, the old station will  
be replaced by the new one.  
• Each time you press the key, another preset station is received in  
order.  
PressingtheP.CALL ()keydoesthefollowing:  
01=02=03= .........38=39=40=01=02=03=  
Receiving preset stations  
PressingtheP.CALL (¤)keydoesthefollowing:  
01+02+03+ .........38+39+40+01+02+03+  
Numeric keys  
TUNER  
Numeric keys  
TUNER  
Holdingdownthekey,letsyouskipthroughthepresets,receivingeachfor  
0.5secondsapiece.  
RC-R0610  
RC-R0510  
1Press TUNER to select the tuner as the source.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to radio broadcasts  
Tuning by program type (PTY search)  
23  
This function lets you set the tuner to automatically search for stations  
which are currently broadcasting the type of program (genre) you want to  
listen to.  
3Press the PTY key to start searching.  
EXAM PLE:SearchingforaRockM usicbroadcast.  
Display while searching  
Blinks  
Under certain receiving conditions, it m ay take m ore than 1 m inute to  
completethesearch.  
FM
STEREO
SP  
RDS PTY  
A
L
R
SW  
Program type name display  
PTY  
PTY  
P.CALL ¤ / ‹  
Display when a station is received.  
Goes out  
P.CALL ¤ / ‹  
FM
STEREO
SP  
RDS
A
L
R
SW  
Station name display  
RC-R0610  
RC-R0510  
• No sound is heard while “PTY” is blinking.  
• If the desired program type cannot be found, “NO PROG” is displayed,  
then after several seconds the display returns to the original display.  
Preparations  
• Execute the RDS auto memory procedure.  
• Set the broadcast band to FM.  
• Tune to an RDS station.  
To select another program type  
Repeatsteps1,2 and3.  
1Press the PTY key to activate the PTY search mode.  
STEREO
SP  
RDS PTY  
A
L
R
SW  
O
When an RDS broadcast is received, the program type is shown on the  
display. If no PTY data is available, or if the station is not an RDS station,  
NONE” is displayed.  
While the “PTY” indicator is lit, use the P.CALL keys to  
select the program type of your choice.  
2
Program typetable  
Program TypeName  
News  
Current Affairs  
Information  
Sport  
Education  
Drama  
Culture  
Science  
Display  
Program TypeName  
Weather  
Finance  
Children’s programmes  
Social affairs  
Religion  
Phone In  
Travel  
Leisure  
Jazz music  
Country Music  
National Music  
Oldies Music  
Folk Music  
Display  
NEWS  
AFFAIRS  
INFO  
WEATHER  
FINANCE  
CHILDREN  
SOCIAL  
RELIGION  
PHONE IN  
TRAVEL  
LEISURE  
JAZZ  
COUNTRY  
NATION M  
OLDIES  
SPORT  
EDUCATE  
DRAMA  
CULTURE  
SCIENCE  
VARIED  
POP M  
ROCK M  
EASY M  
LIGHT M  
CLASSICS  
OTHER M  
Varied Speech  
Pop Music  
Rock Music  
Easy Music  
Light Classical Music  
Serious Classical Music  
Other Music  
FOLK M  
DOCUMENT  
Documentary  
NO PROGモisdisplayedifthisoperationisattemptedbeforeperformingthe  
RDS AutoM emoryoperation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ambience effects  
Thisreceiverisequippedwithlisteningmodesthatallow youtoenjoy  
anenhancedsonicambiencewithavarietyofvideosources.  
Inordertoobtaintheoptimum effectfrom thesurroundmodes,make  
24  
Dolby Digital (AC-3)  
The Dolby Digital (AC-3) surround format lets you enjoy up to 5.1  
channels of digital surround sound from Dolby Digital (AC-3) program  
suretoinputtheproperspeakersettingsbeforehand.  
%
sources (such as Laserdisc or DVD software marked  
). Com-  
pared with previous Dolby surround, Dolby Digital (AC-3) provides even  
better sound quality, greater spatial accuracy, and improved dynamic  
range.  
Note  
Surround modes  
Although a full set of speakers (front left, right, and center, surround left  
and right, and a subwoofer) is required for true 5.1 channel Dolby Digital  
(AC-3) surround sound, this receiver lets you enjoy Dolby Digital (AC-3)  
(and Dolby Surround) program sources, even if you connect only the  
DTS (KRF-V7030D only)  
front speakers. ("Speaker placement")  
$
The DTS multi-channel audio format is available on CD, LD and DVD  
software. DTS is a strictly digital format and can not be decoded inside  
most CD, LD or DVD players. For this reason, if you attempt to listen to  
DTS encoded software through the analog output of your new CD, LD  
or DVD player, you will experience digital noise in most cases. This noise  
can be quite loud if the analog output is connected directly to a high  
power amplification system. Proper measures for playing the digital  
output as described below should be taken to avoid this situation. To  
enjoy DTS Digital Surround playback, an external 5.1 channel DTS  
Digital Surround decoder system or an amplifier with a built-in DTS  
Digital Surround decoder must be connected to the digital output (S/P  
DIF, AES/EBU or TosLink) of a CD, LD or DVD player.  
Center speaker  
Subwoofer (LFE)*  
Front speaker (L, R)  
KRF-7030D is incorporate the DTS decoder.  
Surround speakers (L, R)  
Operations  
Center speaker  
* LFE = Low Frequency Effects. This channel delivers separate non-  
directional bass signals to the subwoofer for more dynamic deep bass  
sound effects.  
Although only Dolby Digital (AC-3) soundtracks incorporate a separate  
low frequency channel, connecting a subwoofer will also improve deep  
bass performance in the other surround modes.  
The indication "LFE" appears in the display when a signal is being input  
for this channel.  
Subwoofer (LFE)*  
Front speaker (L, R)  
Surround speakers (L, R)  
* Optional in this mode.  
Dolby Pro Logic  
* LFE = Low Frequency Effects. This channel delivers separate non-  
directional bass signals to the subwoofer for more dynamic deep  
bass sound effects.  
Dolby Pro Logic is a specially encoded 2 channel surround format  
designed to provide theater-like surround sound from Dolby Surround  
encoded sources (such as video and Laserdisc software marked  
DTS has a .1 or LFE channel.  
The indication "LFE" appears in the display when a signal is being  
input for this channel.  
). This receiver is equipped with a Dolby Pro Logic  
surround decoder to let you enjoy the wide variety of currently available  
Dolby Surround home video software.  
Center speaker  
Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic"  
and the double-D symbol are trademarks of Dolby Laboratories. Confiden-  
tial Unpublished Works. ©1992-1997 Dolby Laboratories. All rights re-  
served.  
Subwoofer (SW)  
Front speaker (L, R)  
Manufactured under license from Digital Theater  
Systems, Inc. US Pal. No. 5,451,942 and other  
worldwide patents issues and pending.  
“DTS” and “DTS Digital Surround” are trademarks of  
Digital Theater Systems, Inc.  
Surround speakers (L, R)  
© 1996 Digital Theater Systems, Inc. All rights re-  
served.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ambience effects  
Surround Play  
25  
The DTS compatible models can reproduce a CD, DVD, or LD carrying  
the DTS mark. (KRF-V7030D only)  
Dolby 3 Stereo  
Dolby 3 Stereo is available for systems that do not have surround  
speakers. When in the Dolby 3 Stereo mode, the surround information  
is redirected to the front left and right speakers. This mode is designed  
for use with Dolby Surround program sources, but can also improve  
sound field unity for programs that are not Dolby Surround encoded.  
Dialog positioning and sound image definition, however, may not be as  
accurate when used with programs that are not Dolby Surround  
encoded.  
DOLBY DIGITAL can be used when playing DVD or LD software bearing  
the  
(etc.). DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when  
playing video, DVD, or LD software bearing the mark.  
mark and DOLBY DIGITAL (AC-3) format digital broadcasts  
INPUT MODE  
INPUT SELECTOR  
Center speaker  
Subwoofer (SW)  
LISTEN MODE  
Front speaker (L, R)  
LSTN.M  
LISTEN MODE  
INPUT  
SELECTOR  
INPUT  
SELECTOR  
DVD 6-channel mode  
Using a DVD player or the like equipped with six (5.1) output channels  
and the receiver, you can enjoy multi-channel encoded DVD source  
material in all its splendor. Since the source signals are digital and each  
channel is input independently, the resulting sound quality, sense of  
spaciousness, and dynamic range are superb.  
RC-R0610  
RC-R0510  
Preparations  
O
• Turn ON related components.  
Center speaker  
• Complete "Preparing for surround sound" (speaker settings).%  
• Use the INPUT SELECTOR to select the component you wish to play  
back with surround sound.  
• Use the INPUT M ODE key to select the input mode (analog or digital)  
for the source you wish to play back.  
0
• Noise will be produced when a DTS source is played by selecting the  
analog input.  
Subwoofer (LFE)*  
Front speaker (L, R)  
1Start playing the video software.  
Surround speakers (L, R)  
Press the LISTEN MODE (LSTN.M) key to select the  
listening mode.  
The listening mode settings are stored separately for each input. If the  
input mode is set to digital auto ("AUTO SOUND" lights), the receiver  
selects the optimal listening mode automatically based on the type of  
input signal and the speaker settings.  
2
* LFE = Low Frequency Effects. This channel delivers separate non-  
directional bass signals to the subwoofer for more dynamic deep bass  
sound effects.  
The indication "LFE" appears in the display when a signal is being input  
for this channel.  
EachpressoftheLISTEN M ODE (LSTN.M )keyswitchesthesettingas  
listedbelow.  
Thelisteningmodesettingsaredifferentdependingonthetypeof input  
signal.  
When the DOLBY DIGITAL signal is input:  
(The DOLBY DIGITAL, PROLOGIC, or 3 STEREO indicator lights up.)  
1DOLBY DIGITAL:DOLBY DIGITAL surround  
2PRO LOGIC:PRO LOGIC surround  
33 STEREO:3-STEREO surround  
4STEREO:Normal stereo playback  
W hen you selectDOLBY DIGAITAL  
AUTO SOUND DIGITAL  
SP  
A
L
LFE  
LS  
C
R
SW  
RS  
Continuedtonextpage  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ambience effects  
When the DTS signal is input: (KRF-V7030D only)  
DVD 6-channel playback  
(The DTS indicator lights up.)  
26  
Using a DVD player or the like equipped with six (5.1) output channels and  
the receiver, you can enjoy surround sound playback.  
1DTS:DTS surround  
2STEREO:Normal stereo playback  
When you try to play a disc other than Dolby Digital (AC-3) such as DTS  
CD, no sound is produced or, noise may be heard. To avoid this situation,  
make sure that you connect the component to the receiver’s DVD 6CH.  
INPUT jacks through a surround processor which can decode the  
surround signal you wont to listen to.  
When the analog signal or the digital signal except for the  
DOLBY DIGITAL or DTS signal is input:  
1PRO LOGIC: PRO LOGIC surround (The PRO LOGIC  
indicator lights up.)  
Connecting a DVD player which can decode the surround signal itself is  
also acceptable.  
23STEREO:3-STEREO surround (The 3 STEREO indicator  
lights up.)  
3STEREO:Normal stereo playback  
INPUT MODE INPUT SELECTOR  
• If a Dolby Digital signal having more channels than the maximum  
number of playback channels available using the receiver’s current  
settings is input, the DOW N M IX indicator on the front panel lights  
up and downmixing is performed to match the number of available  
channels.  
3Adjust the volume.  
Notes  
• Depending on the type of the signal or speaker setting, some listening  
modes cannot be selected.  
• When playback is started, the sound may be cut or interrupted before  
the input source is confirmed as Dolby Digital.  
Operations  
DVD  
DVD  
• To enjoy Dolby Digital (AC-3) surround (as well as all the other listening  
modes) from a single component, be sure to use a Dolby Digital (AC-  
3) compatible source component. Connect the Dolby Digital (AC-3)  
compatible source component's Dolby Digital (AC-3) format digital  
audio signal to one of the DIGITAL INPUT jacks on the back of the  
receiver. Connect the normal audio signal correctly to the respective  
RC-R0610  
RC-R0510  
component's AUDIO jacks.  
890  
Preparations  
• Connect your DVD player to the DVD 6ch jacks of the receiver.  
• Turn on all other components that will be used.  
• Complete “Preparing for surround sound”.  
%
1Select “DVD/6ch” as the input source.  
• If speaker system B is on when “DVD/6ch” is selected as the input  
source, it switches off and speaker system A turns on automatically.  
2Select "6CH INPT" by pressing the INPUT MODE key.  
3Start playback of the DVD software.  
4Adjust the volume.  
• It is not possible individually to adjust the volume level or sound quality  
(SET UP, SOUND) of the separate channels when the receiver is in the  
DVD 6ch mode. Adjust the volume with the controls of the DVD player.  
For the powered subwoofer, you can adjust the volume of the  
subwoofer using the subwoofer’s own volume control.  
• (KRF-V5030D/V4530D only)  
When you press the POWER (DVD) key and the DVD player does not  
turn on, press the 1 or 2 key during pressing the POWER (DVD) key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ambience effects  
Convenient functions  
2 UsetheM ULTICONTROL toselecttheonoroffsetting.  
27  
MULTI CONTROL  
AUTO SOUND DIGITAL  
KRF-V6030D/  
V5030D/  
V4530D  
SP  
A
L
LFE  
LS  
C
R
SW  
DIMMER  
RS  
• The adjustment item is displayed for approximately 8 seconds.  
• Some Dolby Digital (AC-3) software may not be compatible with the  
Midnight mode.  
SOUND  
Display dimmer adjustment  
The dimmer function lets you select the brightness of the receiver's  
display. You might find this useful if you darken your room to watch movies  
or listen to music.  
SOUND  
SOUND  
Each timeyou presstheDIM M ER key, thedisplay brightnesschanges  
amongthethreeavailablesettings.Selectthebrightnesslevelyoufindmost  
pleasing.  
MULTI  
CONTROL  
MULTI  
CONTROL  
PRO LOGIC 
SP  
A
L
LS  
C
S
R
SW  
RS  
RC-R0610  
RC-R0510  
PRO LOGIC 
SP  
A
L
LS  
C
S
R
SW  
RS  
Adjusting the sound  
You can make further adjustments to the sound while listening to playback  
in the surround mode.  
PRO LOGIC 
SP  
A
L
LS  
C
S
R
SW  
RS  
1 PresstheSOUND keytoselecttheitem youwanttoadjust.  
O
Eachpressswitchestheselectionaslistedbelow.  
Notethatsomeitemsarenotdisplayedincertainmodes.  
96kHz LPCM playback  
1BASS (low frequency range sound quality adjustment)  
2TREB (high frequency range sound quality adjustment)  
3Cch(center speaker level adjustment)  
4RS (right surround speaker level adjustment)  
5LS (left surround speaker level adjustment)  
6SW (subwoofer level adjustment)  
&
&
The receiver is compatible with the 96kHz LPCM playback. To play a  
96kHz DVD, set the listen mode to "STEREO."  
• When "96kHz" appears in the display, press the LISTEN MODE key  
(the listen mode changes to the STEREO mode).  
7INPUT (input level adjustment)  
^
8NIGHT (midnight mode on/off)  
2 UsetheM ULTICONTROL toadjustthesettingasdesired.  
• The adjustment item is displayed for approximately 8 seconds.  
Midnight mode (Dolby Digital (AC-3) mode only)  
When watching movies at night , you might not be able to raise the volume  
as loud as normal. Midnight mode compresses the dynamic range of  
previously specified parts of the Dolby Digital (AC-3) sound track (like  
scenes with sudden increases in volume) to minimize the difference in  
volume between the specified and non-specified parts. This makes it easy  
to hear all of the sound track, even when listening at low volumes.  
1 PresstheSOUND keyseveraltimesuntil"NIGHT"isdisplayed.  
• This can be selected only if DVD, VIDEO2 or VIDEO3 is selected as  
the source and the listen mode is set to "DOLBY DIGITAL."  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In case of difficulty  
Resetting the Microcomputer  
28  
W iththepowercordpluggedin,turnthePOW ER keyOFF.Then,  
whileholdingdowntheON/STANDBY key,pressPOW ER.  
Ifthemicrocomputermaymalfunction(unitcannotbeoperated,orshowsan  
erroneousdisplay)ifthepowercordisunpluggedwhilethepowerisON,or  
dueto someotherexternalfactor. Ifthishappens, executethefollowing  
procedure to reset the m icrocom puter and return the unit to its norm al  
operatingcondition.  
• Please note that resetting the microcomputer will clear the contents  
of the memory and returns the unit to the state it was in when it left the  
factory.  
Amplifier  
Symptom  
Remedy  
Cause  
Nosoundfrom thespeakers.  
• Connect them properly referring to “Connecting  
• The speaker cords are disconnected.  
the speakers”  
#
• Adjust the volume to a proper level.  
• Turn OFF the MUTE.  
• Set the SPEAKERS switch(es) to ON.  
• VOLUME is set to the minimum position.  
• MUTE is ON.  
• The SPEAKERS switches are set to OFF.  
*
^
Thestandbyindicatorblinksandsoundisnotoutput.  
Soundisnotoutputfrom oneofthespeakers.  
• Turn the power off, eliminate the short-circuit-  
ing, then turn on the power again.  
• Speaker cords are short-circuited.  
• The speaker cord is disconnected.  
• Connect it properly referring to “Connecting the  
speakers”.  
#
Sound is not output from the surround  
speakersand/orthecenterspeaker,ortheirsoundis  
verysmall.  
• Connect it properly referring to “Connecting the  
• The surround speaker cords and/or the center  
speaker cord is disconnected.  
• A surround mode has not been engaged.  
• The surround and/or center volume controls are  
set to the minimum level.  
speakers”.  
#
• Select a surround mode.  
• Adjust the speaker levels using the test tone.  
%
A hum m ing noise is generated when the PHONO  
inputselectorisselected.  
• Insert the audio cord plugs securely into the  
PHONO jacks.  
• The audio cord from the turntable is not con-  
nected to the PHONO jacks.  
• Connect the grounding wire to the GND termi-  
nal on the rear panel.  
• The turntable is not grounded.  
W henplayingaDolbyDigital(AC-3)sourcesignal  
usingaDVD player,thesoundiscutoffsoonafterit  
starts.  
• Set the input mode to digital manual before  
starting playback of the Dolby Digital source.  
0
• There are many possible causes for this prob-  
lem, depending on the type of DVD player used.  
Nosoundisproducedduringplaybackfrom aDVD  
player.  
• Press the INPUT MODE key to select to digital  
• The input mode is set to digital manual.  
• The software is copy-guarded.  
auto mode.  
0
A videosourcecannotberecordednormally.  
• Copy-guarded video software cannot be re-  
corded.  
NoaudioisproducedwhenaDTS sourceisplayed.  
(exceptforKRF-7030D)  
DTS sources cannot be reproduced with a model  
that does not incorporate a DTS decoder.  
• The model does not incorporate a DTS decoder.  
Other  
Tuner  
Symptom  
Cause  
Remedy  
Radiostationscannotbereceived.  
• No antenna is connected.  
• Connect an antenna.  
!
• The broadcast band is not set properly.  
• Set the broadcast band properly.  
• The frequency of the desired station is not • Tune the frequency of the desired station.  
tuned.  
)
Interference.  
• Noise due to ignition noise from an automobile. • Install the outdoor antenna away from the road.  
• Noise due to interference from an electric appli- • Turn off the power to the appliance.  
ance.  
• Noise due to a nearby TV set.  
• Install the receiver farther away from the TV.  
A station which was preset cannot be received by • The preset station belongs to a frequency that • Preset a station with a receivable frequency.  
pressingthecorrespondingnumerickey.  
cannot be received.  
• The preset memory was cleared because the • Preset the station again.  
power cord had been unplugged for a long  
period of time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caution: Readthispagecarefullytoensuresafeoperation.  
Specifications  
AUDIO section (KRF-V7030D/V6030D)  
RatedpoweroutputduringSTEREO operation  
DIN/IEC (DIN 1kHz,0.7% T.H.D.,at4Ω ..................... 100W + 100W  
EffectivepoweroutputduringSURROUND operation  
Outputlevel/impedance  
TAPE REC ........................................................................200mV /1kΩ  
M ONITOR OUT (VIDEO2/M ONITOR).........................200mV /1kΩ  
PRE OUT (SUBW OOFER)..................................................2V /2.2kΩ  
29  
Tonecontrol  
FRO N T (1kH z, 0.7% T.H .D . at 4 , one channel driven)  
.........................................................................................100W + 100W  
CENTER (1kHz,0.7% T.H.D.at4Ω, onechanneldriven)  
........................................................................................................ 100W  
SURROUND (1kHz,0.7% T.H.D.at4Ω, onechanneldriven)  
.........................................................................................100W + 100W  
Totalharmonicdistortion......................................0.055% (1kHz,50W ,4)  
Frequencyresponse(IHF '66)  
BASS ..........................................................................10dB (at100Hz)  
TREBLE .....................................................................10dB (at10kHz)  
DIGITAL AUDIO section  
Samplingfrequency................................... 32kHz,44.1kHz,48kHz,96kHz  
Inputlevel/impedance/wavelength  
Optical .........................................(-15dBm ̃-21dBm),660nm ア30nm  
Coaxial............................................................................. 0.5Vp-p/75Ω  
CD ........................................................13Hz̃53kHz,+0dB, 3.0dB  
Signaltonoiseratio(IHFユ66)  
PHONO (M M )................................................................................. 75dB  
CD .................................................................................................... 91dB  
Inputsensitivity/impedance  
VIDEO section  
VIDEO inputs/outputs  
VIDEO  
S VIDEO (KRF-V7030D only)  
(luminancesignal)...........................................1Vp-p/75Ω  
(chrominancesignal)................................0.286Vp-p/75Ω  
(composite)......................................................1Vp-p/75Ω  
PHONO (M M )................................................................. 2.5mV /27kΩ  
CD ................................................................................... 200mV /47kΩ  
M ONITOR IN (KRF-V6030D:VIDEO2/M ONITOR)  
........................................................................................ 200mV /47kΩ  
Outputlevel/impedance  
FM tuner section  
Tuningfrequencyrange.................................................87.5M Hz̃108M Hz  
Usablesensitivity (DIN at75)  
M ONO ...................................1.2V/13.2dBf(40kHzdev.S/N 26dB)  
STEREO .................................45V/42.1dBf(46kHzdev.S/N 46dB)  
Totalharmonicdistortion(1kHz)  
M ONO ................................................................... 0.2% (65.2dBfinput)  
STEREO ................................................................ 0.8% (65.2dBfinput)  
Signaltonoiseratio(DIN weighted)  
M ONO ..............................................65dB (40kHzdev.65.2dBfinput)  
STEREO ..........................................60dB (46kHzdev.65.2dBfinput)  
Stereoseparation(DIN 1kHz)................................................................ 36dB  
Selectivity(DIN300kHz) ..................................................................... 64dB  
Frequencyresponse ................................(30Hz̃15kHz),+0.5dB, 3.0dB  
TAPE REC ........................................................................200mV /1kΩ  
M ONITOR OUT (KRF-V6030D:VIDEO2/M ONITOR)  
...........................................................................................200mV /1kΩ  
PRE OUT (SUBW OOFER)..................................................2V /2.2kΩ  
Tonecontrol  
BASS ..........................................................................10dB (at100Hz)  
TREBLE .....................................................................10dB (at10kHz)  
AUDIO section (KRF-V5030D/V4530D)  
RatedpoweroutputduringSTEREO operation(KRF-V5030D)  
DIN/IEC (DIN 1kHz,0.7% ,4).......................................80W + 80W  
RatedpoweroutputduringSTEREO operation(KRF-V4530D)  
DIN/IEC (DIN 1kHz,0.7% THD,4)..............................60W + 60W  
EffectivepoweroutputduringSURROUND operation(KRF-V5030D)  
FRO N T (1kH z, 0.7% T.H .D . at 4 , one channel driven)  
.............................................................................................80W + 80W  
CENTER (1kHz,0.7% T.H.D.at4Ω, onechanneldriven)  
AM tuner section  
Tuningfrequencyrange..................................................531kHz̃1,602kHz  
Usablesensitivity...............................................................16V /(600V/m)  
Signaltonoiseratio(30% mod.1mV input)......................................... 50dB  
.......................................................................................................... 80W  
SURROUND (1kHz,0.7% T.H.D.at4Ω, onechanneldriven)  
.............................................................................................80W + 80W  
EffectivepoweroutputduringSURROUND operation(KRF-V4530D)  
GENERAL  
Powerconsumption  
FRO N T (1kH z, 0.7% T.H .D . at 4 , one channel driven)  
.............................................................................................60W + 60W  
CENTER (1kHz,0.7% T.H.D.at4Ω, onechanneldriven)  
.......................................................................................................... 60W  
SURROUND (1kHz,0.7% T.H.D.at4Ω, onechanneldriven)  
.............................................................................................60W + 60W  
Totalharmonicdistortion(KRF-V5030D)  
KRF-V5030D ................................................................................. 220W  
KRF-V7030D/V6030D .................................................................. 250W  
AC outlet  
SW ITCHED ................................................................. (total90W max.)  
Dimensions.....................................................................................W :440mm  
H :143mm  
D :400mm  
W eight......................................................................................................8.9kg  
.......................................................................0.055% (1kHz,40W ,4)  
Totalharmonicdistortion(KRF-V4530D)  
O
.........................................................................0.04% (1kHz,30W ,4)  
Frequencyresponse(IHF '66)  
CD ........................................................13Hz̃53kHz,+0dB, 3.0dB  
Signaltonoiseratio(IHFユ66)  
PHONO (M M )................................................................................. 75dB  
CD .................................................................................................... 91dB  
Inputsensitivity/impedance  
PHONO (M M )................................................................. 2.5mV /27kΩ  
CD ................................................................................... 200mV /47kΩ  
M ONITOR IN (VIDEO2/M ONITOR).......................... 200mV /47kΩ  
Notes  
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.  
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For your records  
Record the serial number, found on the back of the unit, in the spaces  
designated on the warranty card, and in the space provided below. Refer  
to the model and serial numbers whenever you call upon your dealer for  
information or service on this product.  
Model __________________ Serial Number ________________________  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Personal Lift LC2A015SIP3LU E User Manual
Insignia TV DVD Combo NS 20CLTV User Manual
Intel Digital Camera 05 2409 003 User Manual
Invacare Mobility Aid 1073913 User Manual
JVC Flat Panel Television 0708TSH II IM User Manual
JVC Home Theater System THG31 User Manual
Kawai Music Mixer MX 4S User Manual
King Canada Air Compressor 8494K User Manual
Kodak Camera Accessories Aptus II User Manual
Kompernass Hot Beverage Maker SWKT 3000 A1 User Manual