GPS NAVIGATION SYSTEM
DNX SERIES
DNX5360 DNX5360M
MONITOR WITH DVD RECEIVER
DDX SERIES
DDX5036 DDX5036M
INSTRUCTION MANUAL
This instruction manual is used to describe models listed below.
Model availability and features (functions) may differ depending on the country and
sales area.
• Type 2
• Type 3
• Type 4
• Type 6
(DVD Region Code 2 area)
(DVD Region Code 3 area)
(DVD Region Code 4 area)
(DVD Region Code 6 area)
© B64-4615-00/02 (MW/M2W/XW/VV)
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
59
59
60
60
61
61
62
62
63
63
64
65
66
67
68
69
Hands-Free Phoning
Before Use
Downloading the Phonebook
Receiving a Call
During a Call
Call Waiting
44
44
44
45
45
45
46
47
47
48
48
49
50
51
52
53
54
How to Display SETUP Menu Screen
DivX Setup
Software Information
User Interface
Language Setting
Touch Panel Adjustment
Clock Setup
Security Indicator Setup
Setup Memory
Entering Background
Panel Color Coordinate
Screen Adjustment
Registering Bluetooth Unit
Registering Bluetooth Unit PIN Code
Bluetooth Unit Connection
Making a Call
Calling by Phonebook
Calling by Entering a Phone Number
Making a Call Using Call Records
Calling by Voice Recognition
Controlling Tone-based Services
Setting Up the Hands-Free Phone
Voice Registration
Key Word Voice Registration
Phone Number Preset
SMS (Short Message Service)
Bluetooth Hands-Free/Audio Output Setup 69
AV Input Setup
AV Interface Setup
Navigation Setup
Speaker Setup
70
70
71
72
73
74
74
75
76
76
77
77
DVD Setup
DVD Language Setup
DVD Parental Level Setup
Disc Setup
USB Setup
iPod Setup
Audio Control
Audio Control Menu
Audio Control
Equalizer Control
Tone Setup
56
56
56
57
57
58
Tuner Setup (Type 2/ 3 models)
TV Setup
Zone Control
Remote Controller
78
78
78
79
80
Initial Setup
85
86
87
88
89
90
Battery installation
Status bar Indicator items
DVD Language Codes
Help? Troubleshooting
Help? Error
Remote Controller mode switch
Common operations (AUD mode)
DVD/VCD (DVD mode)
Music Disc/Audio file/Video file/ Picture file
(AUD mode)
Radio (AUD mode)
iPod (AUD mode)
USB (AUD mode)
NAV (NAVI mode) (RC-DV331 only)
TV (TV mode)
81
82
83
83
83
84
Specifications
English
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
Handling discs
2WARNING
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with
tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
To prevent injury or fire, take the following
precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
• Do not watch or fix your eyes on the unit’s display
when you are driving for any extended period.
• When removing discs from this unit, pull them out
horizontally.
• If the disc center hole or outside rim has burrs,
use the disc only after removing the burrs with a
ballpoint pen etc.
How to reset your unit
• If the unit or the connected unit fails to operate
properly, press the Reset button. The unit returns to
factory settings when the Reset button is pressed.
• Remove the USB device before pressing the Reset
button. Pressing the Reset button with the USB
device installed can damage the data contained in
the USB device. For how to remove the USB device,
see <How to Set a Medium / a Device> (page 13).
Discs that cannot be used
• Discs that are not round cannot be used.
• When the unit is turned on after pressing the Reset
button, the Initial SETUP screen is displayed. (page
85)
• Discs with coloring on the recording surface or
discs that are dirty cannot be used.
• This unit can only play the CDs with
.
This unit may not correctly play discs which do not
TEL
AV OUT
have the mark.
• You cannot play a disc that has not been finalized.
(For the finalization process refer to your writing
software, and your recorder instruction manual.)
NAV
Reset button
• If you try to load a 3-inch-disc with its adapter into
the unit, the adapter might separate from the disc
and damage the unit.
Cleaning the unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe it again with a clean soft dry cloth.
Other notes
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check
with your Kenwood dealer to make sure that they
work with your model and in your area.
• Characters that conform to ISO 8859-1 can be
displayed.
¤
•
Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
• The RDS or RBDS feature won’t work where the
service is not supported by any broadcasting
station.
Lens fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
disc player of the unit. Called lens fogging, this
condensation on the lens may not allow discs to play.
In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after a while, consult your Kenwood
dealer.
Protecting the monitor
To protect the monitor from damage, do not operate
the monitor using a ball point pen or similar tool with
the sharp tip.
4
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
About Audio files
List of playable discs
•
Playable Audio file
Disc
types
DVD
Standard
Support
Remark
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), Linear
PCM (WAV) (.wav)
‡
×
DVD Video
DVD Audio
DVD-VR
⁄
‡
Not compatible with CPRM.
•
If music of normal CD and other playback systems are
‡
DVD-R
MP3/WMA/AAC/WAV/
JPEG/MPEG/DivX Playback
Multi-border/Multisession/
(Playback depends on
authoring conditions)
Compatible with 8-cm (3
inch) discs
recorded in the same disc, only the playback system
recorded at the first setout is played.
Acceptable media
‡
‡
‡
DVD-RW
DVD+R
•
CD-R/RW/ROM, DVD R/RW, mass-storage-class
USB device, iPod with KCA-iP301V
DVD+RW
•
•
Playable disc file format
ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
Playable USB device file system
FAT16, FAT32
‡
‡
×
‡
DVD-R DL (Dual layer)
DVD+R DL (Double layer)
DVD-RAM
Only video format
CD
Music CD
CD-TEXT/8-cm (3 inch)
discs supported.
MP3/WMA/AAC/WAV/
JPEG/DivX playback.
Multisession supported
Packet write not supported.
Although the audio files are complied with the standards
listed above, the play maybe impossible depending on
the types or conditions of media or device.
‡
‡
‡
‡
‡
×
CD-ROM
CD-R
•
Playing order of the Audio file
In the example of folder/file tree shown below, the
files are played in the order from ① to ⑩.
CD-RW
DTS-CD
Video CD (VCD)
Super video CD
Photo CD
<
v
:
:
FFollder
Audiofile
CD
(ꢂ)
vꢀ
ꢁ
×
%
CD-EXTRA
Only music CD session can
be played.
Sound quality of normal
CD music
ꢃ
vꢆ
vꢇ
%
HDCD
ꢅ
vꢄ
ꢈ
CCCD
×
×
%
Others
Dualdisc
vꢉ
v.
Super audio CD
Only CD layer can be
played.
‡ : Playback is possible.
An online manual about audio files is put on the
online manual, detailed information and notes
which are not written in this manual are provided.
Make sure to read through the online manual as
well.
% : Playback is partly possible.
× : Playback is impossible.
⁄
•
When buying DRM enabled contents, check the
Registration Code in the <DivX Setup> (page 60).
Registration Code changes each time a file with the
displayed Registration Code is played to protect against
copying.
About Video files
•
•
•
Acceptable video files
MPEG1, MPEG2, DivX
Extensions
Use of "DualDisc"
When playing a "DualDisc" on this unit, the surface
of the disc that is not played may be scratched
while the disc is inserted or ejected. Since the music
CD surface does not conform to the CD standard,
playback may be impossible.
mpg, mpeg, m1v, m2v, divx, div, avi
Acceptable media
CD-R/RW/ROM, DVD R/RW, mass-storage-class
USB device, iPod with KCA-iP301V
Acceptable discs, disc formats, USB device file system,
file and folder names and playing order are the same
as those for audio files. See <About Audio files>.
(A "DualDisc" is a disc with one surface containing
DVD standard signals and the other surface
containing music CD signals.)
Next page 3
English
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
About Picture files
About USB device
• In this manual, the word "USB device" is used for
flash memories and digital audio players which
have USB terminals.
• When the USB device is connected to this unit,
it can be charged up provided that this unit is
powered.
• Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
•
•
•
Acceptable picture files
JPEG
Extensions
jpg, jpeg
Acceptable media
CD-R/RW/ROM, DVD R/RW, mass-storage-class
USB device
Acceptable discs, disc formats, USB device file system,
file and folder names and playing order are the same
as those for audio files. See <About Audio files>.
• You cannot connect a USB device via a USB hub
and Multi Card Reader.
• Take backups of the audio files used with this unit.
The files can be erased depending on the operating
conditions of the USB device.
We shall have no compensation for any damage
arising out of erasure of the stored data.
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
• When connecting the USB device, usage of the
CA-U1EX (option) is recommended.
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than 5 m can result in abnormal playback.
iPod/iPhone that can be connected to this
unit
Made for
• iPod nano (1st generation)
• iPod nano (3rd generation)
• iPod nano (5th generation)
• iPod with video
• iPod nano (2nd generation)
• iPod nano (4th generation)
• iPod classic
• iPod touch (1st generation) • iPod touch (2nd generation)
Works with
Navigation units that can be connected to
this unit (DDX series only)
• KNA-G630
• Update iPod/iPhone software to the latest version.
• KNA-G630CN
• You can control an iPod/iPhone from this unit by
connecting an iPod/iPhone (commercial product)
with Dock connector using an optional accessory
iPod connection cable (KCA-iP301V). The word
"iPod" appearing in this manual indicates the iPod/
iPhone connected with the KCA-iP301V (optional
accessory).
Update the navigation software to the latest
version. For how to update the software, refer to the
instruction manual of the navigation unit.
For the latest information on connectable navigation
• By connecting your iPod/iPhone to this unit with
an optional accessory iPod connection cable (KCA-
iP301V), you can supply power to your iPod/iPhone
as well as charge it while playing music. However,
the power of this unit must be on.
TV tuner that can be connected to this unit
• KTC-V300P
• KTC-V300N
Bluetooth unit that can be connected to
this unit
• KCA-BT200
⁄
• If you start playback after connecting the iPod, the
music that has been played by the iPod is played
first.
In this case, "RESUMING" is displayed without
displaying a folder name, etc. Changing the browse
item will display a correct title, etc.
• When the iPod is connected to this unit,
"KENWOOD" or "✓" is displayed on the iPod to
indicate that you cannot operate the iPod.
6
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Region codes in the world
The DVD players are given a region code according to the country or area it is marketed, as shown in the
following map.
1
5
2
1
2
1
4
5
2
4
DVD disc marks
Operation regulatory marks
With this DVD, some functions of this unit such as the
play function may be restricted depending on the
location where the DVD is playing. In this case, the
following marks will appear on the screen. For more
information, refer to the disc manual.
Symbol
Description
Indicates a region number. The discs with this mark can
be played with any DVD player.
ALL
Indicates the number of audio languages recorded. Up
to 8 languages can be recorded in a movie. You can
select a favorite language.
Prohibition Mark
8
Indicates the number of subtitled languages recorded.
Up to 32 languages can be recorded.
32
If a DVD disc has scenes shot from multiple angles, you
can select a favorite angle.
Discs with limited period of use
Do not leave discs with a limited period of use in this
unit. If you load an already expired disc, you may not
be able to remove it from this unit.
9
Indicates the type of screen for the image. The left mark
indicates that a wide image picture (16:9) is displayed
on a standard TV set screen (4:3) with a black band at
both the top and bottom of the screen (letter box).
16:9 LB
English
7
Download from Www.Somanuals.com. All Manuals Search And Download.
How to read this manual
This manual uses illustrations to explain its
operations.
Source Control Screen
The displays and panels shown in this manual
are examples used to provide clear explanations
of the operations.
For this reason, they may be different from the
actual displays or panels used, or some display
patterns may be different.
Switches to the source control screen to use
various functions.
1
Display the Source Control Screen
See <How to Display the Source Control
Screen>.
2
Operation on the Source Control screen
1
Selecting a screen item
Select and choose an item on the screen
Select the item by touching the button on the
screen
[FM] Switches to the FM1/2/3 band.
[AM] Switches to the AM band.
[4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
Multi Function
Short Press
Pre
[CRSC]
Turns the CRSC function On
FM
or Off.
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display
Setting
"AUTO1" Tunes in a station with good reception
automatically.
Change in the screen
With each operation, the screen changes in
th
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
3
Store in memory
2 sec.
∞ : Continues to the next line.
¶ : Ends here.
Continue to touch until the memory number
appears.
Next page 3
Continue to the next page
The instruction continues to the next page.
Make sure to flip the page for the rest of the
instruction.
The above operation example with the mark
differs from the actual operation.
8
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
About the model groups
If different functions are used in different
model groups, the model groups are
described as shown below.
Names of models included in each model
group are as follows:
DNX series
DNX5360 DNX5360M
DDX series
DDX5036 DDX5036M
Function Icon
Icons representing available functions are
shown below.
:Function of DVD-VIDEO playback.
:Function of DVD-VR playback.
:Function of Video CD playback.
:Function of CD (CD-DA) playback.
:Function of Audio File playback.
:Function of MPEG file playback.
:Function of DivX file playback.
:Function of JPEG file playback.
:Function of Disc (DVD, CD) media.
:Function of USB device.
DEO
-VR
o CD
:Function of FM reception.
FM
Other marks
Press 2 seconds or more
Press the button, denoted by
seconds or more
Important precautions are described to
prevent injuries etc.
2sec. , for 2
Indicates to press and hold down the button
until operation starts or the screen changes.
The left example indicates to press the button
for 2 seconds.
Special instructions, supplementary
explanations, limitations, and reference pages
are described.
General precautions and reference pages are
shown on the item.
The initial value of each setup is shown.
English
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions of the buttons on the front panel
Security indicator (page 63)
Remote control sensor
Disc slot (page 13)
A
Reset button
(page 4)
TEL
AV OU
NAV
For DDX
series
B
C
D
ATT
VOL
AUD
TOP
VOL
ATT
AUD
SRC
R-CAM
FNC
NAV MAP
For DNX series
AV-IN
microSD card slot
for upgrading the
navigation system
(page 13)
E
F
Input jack for external device
1 sec. : Press for more than 1 second
Ejects the disc.
A
B
DNX series
Displays the navigation screen.
When the navigation screen has already been displayed, it switches
to the currently selected source screen.
DDX series
Displays the Top Menu screen. %
Volume adjustment. (Turn the knob either way.)
Attenuation of the volume On/Off. (Press the knob.)
1 sec. Displays Tone Control screen.*1 U
C
⁄
*1 The display may not switch to Tone
Control screen in some conditions.
Turns the power On.
D
Displays the Source Select screen. @
1 sec. Turns the power Off.
10
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions of the buttons on the front panel
E
DNX series
DDX series with navigation unit
7 While watching the playback screen of a visual source
Displays the Easy Control screen. &
7 While watching the navigation screen
Displays the Screen Control screen. e
7 While watching the screen other than the above
⁄
Screen Switching function On/Off. !
*2 The function of the [FNC] button
can be changed to the display off
function. See <User Interface> (page
61).
1 sec. Rear view display On/Off.*2
DDX series without navigation unit
7 While watching the playback screen of a visual source
Displays the Easy Control buttons. &
1 sec. Rear view display On/Off.*2
Hands Free control screen On/Off.
F
1 sec. Switches the source that is output at the AV OUTPUT
terminal.
Screen Switching Function
Switching between the navigation screen and the source control screen with one touch operation.
⁄
•
For DDX series
Screen Switching fuction can be activated when an optional navigation system is connected to this unit.
Connecting an external device to AV-IN jack (DNX5360M only)
Use of the optional cable CA-C3AV is recommended for connecting an external player. When
connecting, make sure to attach the ferritic core supplied with this unit to prevent electromagnetic
noise. If the ferritic core may scratch the vehicle, wrap it with the cushion sheet (Accessory of this
unit).
Approx. 10 cm (3-15/16 inch)
R-CAM
Ferritic core
(Accessory of this unit)
FNC
Lock
NAV MAP
AV-IN
Banding band
(Accessory of this unit)
English
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
How to Display the Navigation Screen
How to Select the Source
Sources can be selected from the Source Select
screen.
DNX series
Source Select screen
NAV
VOL
ATT
AUD
The navigation screen appears.
DDX series
TOP
VOL
ATT
AUD
SRC
The Source Select screen appears.
Touch the icon of the source.
Use
or
to turn the page.
For how to operate each source, see the
following pages.
DVD-VIDEO/ DVD-VR/
Video CD disc
\ Page 18
CD
\ Page 23
The navigation screen appears.
Audio file/ Video file/
Picture file disc
\ Page 23
\ Page 29
\ Page 23
\ Page 32
\ Page 37
\ Page 41
iPod
•
For how to set up and use the navigation function,
see the Navigation Instruction Manual.
USB
⁄
•
TUNER
TV
For DDX series
An optional navigation system needs to be connected.
See <Navigation unit that can be connected to this unit>
(page 6) for connectable navigation units.
Bluetooth
⁄
•
For Disc media, iPod, and USB, the input is switched to
the source as the media or the device is set.
12
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
How to Set a Medium / a Device
DNX series
7 MicroSD card
7 Disc media
This microSD card slot is used to upgrade the
Navigation System.
For how to upgrade the Navigation System,
refer to the instruction manual of the
navigation system.
If a disc is already inserted, it is ejected by
pressing the [0] button.
7 iPod
Inserting the microSD card
Hold the microSD card with the label side
facing left and the notched section up, and
insert it into the slot until it clicks.
To disconnect the iPod, stop the playback
by touching the [38] button on the source
control screen, and then disconnect the iPod.
See <Source Control Screen> (page 30).
Removing the microSD card
Push the microSD card until it clicks and
then remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
7 USB device
To disconnect the USB device, touch the [0]
button on the source control screen, and
then disconnect the USB device. See <Source
Control Screen> (page 23).
⁄
•
The playback starts automatically after setting the media
or the device.
English
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
How to Display the Source Control Screen
DDX series
On the Source Control screen you can find all the
control buttons for the selected source.
TOP
Source Control screen
VOL
ATT
AUD
•
For how to use each button, see the operation pages
of each source.
How to display the Source Control screen
The Source Control screen appears.
DNX series
DDX series
with navigation unit
7 While watching the Easy Control screen
7 While watching the navigation screen
The Source Control screen appears.
The Source Control screen appears.
⁄
•
The screen will return to the navigation screen by
touching the same part of the Source Control screen.
14
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Buttons on the Top Menu screen
[NAV Switches to the navigation screen.
[SRC] Switches to the source control screen of
the selected source. The icon of this button
changes according to the selected source.
How to Display Top Menu Screen
]
Top Menu screen is the entrance to all the
functions. You can enter source operation screen
as well as various setup menu from this screen.
Top Menu screen
[TEL
]
Switches to the Hands Free Main
screen. (page 59)
[NAV SETUP] Displays Navigation SETUP screen.
(DNX series and DDX series with navigation
unit only)
Refer to the navigation instruction manual for
setting up the navigation system.
[SRC SETUP] Displays SETUP Menu screen. (page
59)
[TEL SETUP] Displays Hands Free SETUP screen.
(page 50)
How to display the Top Menu screen
[
[
[
SRC SELECT] Displays Source Select
screen. (page 12)
Displays Audio Control Menu screen. (page
56)
]
]
Changes the screen skin each time it is
pressed.
The buttons listed below are common for
many screens.
[MENU] Displays Top Menu screen.
[
]
Opens the function bar. The buttons shown
below appear.
Touch the [MENU] button on any screen.
[
[
[
[
]
Displays the currently selected source
Displays Audio Control Menu screen.
screen.
]
The Top Menu screen appears.
(page 56)
]
Displays SETUP Menu screen. (page
59)
]
•
For DDX series
Pressing the [TOP] button on the front panel also
displays the Top Menu screen.
Closes the function bar.
English
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Basic Operation
Operation on the Playback Screen of
Visual Sources
How to display the playback screen
While watching visual sources, basic operation is
possible by touching the screen.
SRC
The screen has 4 function areas. The function of
each area is different depending on the sources.
(Some areas are unavailable for some sources.)
Playback screen of a visual source
The Source Select screen appears.
Touch the icon of the source.
2
1
3
4
Basic operation of each area
1
Reverse search.
2
Displays Menu control screen (DVD-VIDEO,
DVD-VR source), Picture control buttons
(sources with picture files), or Zoom control
buttons (Video CD).
The Playback screen of a visual source appears.
Switches TV band.
Forward search.
⁄
•
The playback screen may appear directly after touching
the source icon on Source Select screen.
3
4
Displays/ Clears Source Information screen.*
•
For the function of each touching area, see the pages
of each source.
* Source Information screen
2
1
3
4
⁄
•
The information display is cleared automatically after
approximately 5 seconds.
16
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
How to Display the Easy Control Screen
Basic operation buttons of the selected source
can be displayed on the playback screen of
visual sources so that you can control the source
without switching the screen.
Easy Control screen
Buttons on the Easy Control screen
[∞] Changes the function as follows by touching
the [∞] button.
[SCRN] Displays Screen Control screen (page
43).
[TEL] Switches to the Hands Free Main
screen (page 46).
[1], [¡], [4], [¢], [7], [£8]
Buttons for source control. The buttons are
different depending on the source. See the
operation pages of each source.
While watching the visual source
R-CAM
FNC
The Easy control screen appears.
⁄
•
Easy Control screen is hidden when you touch the central
part of the monitor.
English
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching DVD/Video CD
You can play DVD/Video CD using various functions.
•
Set the remote controller mode switch to "DVD" mode before starting operation, see <Remote Controller mode switch>
(page 78).
Playback Screen
Easy Control Screen
Basic functions are available even when the
playback screen is displayed.
Displays the basic operation buttons on the
screen.
1
2
Display the Playback Screen
1
2
Display the Easy Control Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
See <How to Display the Easy Control buttons>
(page 17).
Operation on the Playback Screen
Operation on the Easy Control Screen
2
1
2
1
3
4
3
1, 3
Searches for a chapter.
Searches for a chapter.
1, 2 Switches to the Playback screen.
DVD-VIDEO
DVD-VR
3
Displays the Source Control screen.
Selects a scene (when PBC is
On) or a track (when PBC is Off).
Video CD
[1], [¡] Fast Forwards or Fast Backwards.
Changes the speed (2 times, 3 times, or off) each
time the button is touched.
2
Displays the Menu Control 1 screen
(page 20).
Displays the Menu Control screen
(page 21).
Displays the Zoom Control screen
(page 22).
DVD-VIDEO
DVD-VR
[4], [¢]
Searches for a chapter.
DVD-VIDEO
Searches for a chapter.
DVD-VR
Video CD
Selects a scene (when PBC is On) or a
track (when PBC is Off).
Video CD
4
Displays/ Clears Source Information screen.
[7] Stops playing.
When touched twice, the disc is played from
its beginning when you play it the next time.
⁄
•
The information display is cleared automatically after
approximately 5 seconds.
[38] Plays or pauses.
18
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
"3" Play Mode Display
Source Control Screen
"T"/ "C"/ "R"/ "P" Play Time Display
Use the [TIME] to change play time
display.
Switches to the source control screen to use
various playback functions.
1
2
Display the Source Control Screen
[
]
When
appears, the text display is
scrolled by touching it.
See <How to Display the Source Control
Screen> (page 14).
Multi Function
Operation on the Source Control Screen
DVD-VIDEO/DVD-VR
1
[
[
]
Closes the multi function bar.
Opens the multi function bar.
]
DVD-VIDEO
[REP] Switches the Repeat Play operations in
the following sequence.
Title Repeat, Chapter Repeat, Repeat Off
Video CD
[TIME] Switches the play time display in the
following sequence.
1
Chapter ("C"), Title ("T"), remaining titles ("R")
DVD-VR
[REP] Switches the Repeat Play operations in
the following sequence.
Title Repeat, Repeat Off
[TIME] Switches the play time display in the
following sequence.
Title ("T"), remaining titles ("R")
[38] Plays or pauses.
[7] Stops playing.
When touched twice, the disc is played from
its beginning when you play it the next time.
[PLST] Switches between the original mode
and Play list mode.
[0] Ejects a disc.
Video CD
[1], [¡] Fast Forwards or Fast Backwards.
Changes the speed (2 times, 3 times, or off) each
time the button is touched.
[REP] Switches the Repeat Play operations in
the following sequence.
Track Repeat, Repeat Off (Available when the
PBC is off)
[4], [¢]
Searches for a chapter.
DVD-VIDEO
[TIME] Switches the play time display in the
following sequence.
Track ("P"), remaining discs ("R") (Effective only
when the PBC function is off)
Searches for a chapter.
DVD-VR
Selects a scene (when PBC is On) or a
track (when PBC is Off).
Video CD
[
], [
]
Slow Forwards or
DVD-VR
DVD-VIDEO
,
[PBC] Turns the PBC On or Off. (only when VCD
Ver 2.0 is in use)
Backwards.
[
1
]
Switches to the playback screen.
Information display
Title display.
"Title" Title Number Display
"Chap" Chapter Number Display
"Scene"/ "Track" Scene/Track Number
Display
English
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching DVD/Video CD
DVD-VIDEO Disc Menu
Selects an option from the DVD-VIDEO Disc
Menu.
1
2
Display the Playback Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
⁄
Display the Menu Control 1 screen
•
Touching the central part of the monitor also turns on
the Highlight Control.
•
•
To cancel Highlight Control, press the [FNC] button.
The Highlight Control is cleared automatically after
approximately 10 seconds.
5
Operation on the Menu Control 2 screen
3
Operation on the Menu Control 1 screen
[Menu] Calls the Menu.
[Previous] Displays the Menu Control 1 screen.
[Angle] Switches the picture angle.
[SUB] Switches the subtitle language.
[Audio] Switches the voice language.
[Zoom] Displays the Zoom Control screen.
[Exit] Exits the Menu Control 2 screen.
[Next] Displays the Menu Control 2 screen.
[2], [3], [5], [∞] Selects a menu option.
[Enter] Enters your menu selection.
[Return] Returns to the previous menu screen.
[Top] Displays the Top Menu.
[Highlight] Highlight Control.
[Exit] Exits the Menu Control 1 screen.
6
Operation on the Zoom Control screen
4
Operation on the Highlight Control
Highlight control lets you control DVD Menu
by touching the menu button directly on the
screen.
20
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
[Zoom] Changes the zoom ratio at 4 levels (2
times, 3 times, 4 times, or off) each time you
touch.
DVD-VR Menu Control
Selects an option from the DVD-VR Disc Menu.
1
Display the playback screen
[2], [3], [5], [∞] Scrolls the screen in the
direction you touch.
See <Operation on the Playback Screen of Visual
Sources> (page 16).
[Return] Returns to the Menu Control 2 screen.
[Exit] Exits the Zoom Control screen.
2
Display the Menu Control screen
3
Operation on the Menu Control screen
[Zoom] Displays the Zoom Control screen.
[SUB] Switches the subtitle language.
[Audio] Switches the voice language.
[Exit] Exits the Menu Control screen.
4
Operation on the Zoom Control screen
[Zoom] Changes the zoom ratio at 4 levels (2
times, 3 times, 4 times, or off) each time you
touch.
[2], [3], [5], [∞] Scrolls the screen in the
direction you touch.
[Return] Returns to the Menu Control screen.
[Exit] Exits the Zoom Control screen.
English
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching DVD/Video CD
Video CD Zoom Control
Displays an enlarged VCD screen.
1
Display the playback screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
2
Display the Zoom Control screen
3
Operation on the Zoom Control screen
[Zoom] Changes the zoom ratio at 2 levels (2
times or off) each time you touch.
[2], [3], [5], [∞] Scrolls the screen in the
direction you touch.
[Exit] Exits the Zoom Control screen.
22
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Disc/ Audio File Listening &
Video File/ Picture File Watching
You can recall various control screens during playback of CD, audio file, video file and picture file.
•
•
See <List of playable discs> (page 5) for playable discs.
See <About Audio file> (page 5), <About Video files> (page 5) or <About Picture files> (page 6) for playable files.
[List]
Displays the folder list or play list. (page 24)
Switches to the playback screen.
Information display
Selects the Disc Text or Track Text.
,
,
Source Control Screen
Audio File MPEG/DivX®
JPEG
Switches to the source control screen to use
various playback functions.
[
1
]
1
2
Display the Source Control Screen
CD
See <How to Display the Source Control
Screen> (page 14).
,
,
Audio File MPEG/DivX®
JPEG
Selects Folder Name, File Name, Title,
Artist Name, or Album Name.
Operation on the Source Control Screen
"Track" Track Number Display
CD
"
"
"
Folder Number Display
File Number Display
1
"
"#### / ####" Total number of file in the
folder and the file number display
"3" Play Mode Display
"P"/ "R" Play Time Display
Use the [TIME] to change play time display.
[
]
When
appears, the text display is
Audio File
MPEG/DivX®
JPEG
scrolled by touching it.
1
Multi Function
[1/2] Switches the multi function display.
[38] Plays or pauses.
[7] Stops playing.
[
[
]
Closes the multi function bar.
Opens the multi function bar.
Disc
]
When touched twice, the disc is played from
its beginning when you play it the next time.
CD
[0]
Ejects the disc.
Disc
[REP] Repeats the present track.
USB Disables the USB device.
When "No Device" is shown, the USB
device can be removed safely.
If you wish to play it again while the
USB device is connected, touch it
again.
[RDM] Starts or stops Random Play (to play
music in random order).
[TIME] Switches the play time display between
Track ("P"), and Disc Remaining Time ("R").
[1], [¡]
,
,
CD
Audio File MPEG/DivX®
Fast Forwards or Fast Backwards.
[4], [¢] Selects a track/ file.
[
], [
]
,
,
Audio File MPEG/DivX®
JPEG
Selects a folder.
Next page 3
English
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Disc/ Audio File Listening & Video File/ Picture File Watching
List Select
Audio File
MPEG/DivX®
JPEG
[REP] Repeats the present file or data.
[FREP] Repeats the music or data of the
present folder.
Folder list: Searches folders and Audio/ Video/
Picture files stored in media and devices
according to hierarchy.
[RDM] Starts or stops Random Play (to play
files of the present folder in random order).
Not available if there are only picture files.
Play list: Lists and searches music contained in the
USB device.
1
Display the Source Control Screen
[4Line]/ [2Line] Switches the number of lines
displayed in the Information Display.
See <Source Control Screen> (page 23).
[FOLD]/ [FLIST] Displays the folder list.
2
Start List Select
[PLIST]
in
USB
Audio File
Displays the play list.
[SLIDE]
Disc
,
Audio File
JPEG
Displays images in the folder currently being
played one after another.
If there is no image in the folder currently
being played, initial background is displayed.
For information on setting the image display
time, see <Disc Setup> (page 75) or <USB
Setup> (page 76).
USB
[INFO]
Displays music information
Audio File
⁄
•
(such as Tag and content property) of Audio
file being played.
Touching [List] displays the previously used Folder
list or Play list.
,
Displays information of file
MPEG/DivX®
JPEG
being played.
[LINK]
3
Select a file
in
Searches for another
USB
Audio File
Folder list
Disc/USB
song of the currently selected artist. See <Link
Search> (page 26).
[Device]
Selects the connected USB
USB
1
device (or a partition). See <USB Device
Select> (page 25).
1
Folder opens when touched, and the files in
the folder are played.
When appears, the text display is
[
]
scrolled by touching it.
[
[
[
[
ROOT] Moves to the top hierarchy level.
UP] Moves up a hierarchy level.
TOP]
Moves to the top folder.
USB
CUR] Displays the currently playing folder.
[CTRL] Returns to the Source Control screen.
24
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Play list
in
USB device select
Audio File
USB
Selects the connected USB device (or a partition).
1
2
Display the Source Control Screen
1
See <Source Control Screen> (page 23).
Display the USB Device Select Screen
1
Switches to the lower level of the category.
When appears, the text display is
[
]
scrolled by touching it.
3
Select a USB device
[
[
ALL] Lists all the music in the selected
category.
UP] Moves to the upper level of the
category.
1
[
[
TOP] Moves to the top category.
CUR] Displays the currently playing
category.
[CTRL] Returns to the Source Control screen.
1
[
Selects a device or partition.
UP] Returns to the Device Selection screen.
Scrolls to the position of the specified initial
[
]
When
appears, the text display is
scrolled by touching it.
[CTRL] Returns to the Source Control screen.
Scrolls to the selected initial.
English
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Disc/ Audio File Listening & Video File/ Picture File Watching
Link search (Audio file in USB)
Playback Screen (Video file, Picture file)
Searches for another song of the currently
selected artist.
Basic functions are available even when the
playback screen is displayed.
1
Display the Source Control Screen
1
2
Display the Playback Screen
See <Source Control Screen> (page 23).
See <Operation on the Playback Screen of Visual
Sources> (page 16).
2
Start Link search
Operation on the Playback Screen
2
1
3
3
Select a song
4
1
1, 3 Searches for a file.
2
Displays the Picture Control screen
(page 27).
JPEG
Displays the Menu Control screen
(page 28).
MPEG/DivX®
1
Plays the touched song.
When appears, the text display is
4
Displays/ Clears Source Information screen.
[
]
⁄
scrolled by touching it.
•
The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
[
[
TOP] Moves to the top category.
CUR] Displays the currently playing
category.
[CTRL] Returns to the Source Control screen.
Scrolls to the position of the specified initial
Scrolls to the selected initial.
26
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Control Screen
(Video file, Picture file)
Picture Control
Adjusting the picture display.
Displays the basic operation buttons on the
screen.
1
Display the Playback Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
1
2
Display the Easy Control Screen
See <How to Display the Easy Control Screen>
(page 17).
2
Display the Picture Control Screen
Operation on the Easy Control Screen
1
2
3
3
Adjust the picture display
1, 2 Switches to the Playback screen.
3
Displays the Source Control screen.
[1], [¡]
,
JPEG MPEG/DivX®
Fast Forwards or Fast Backwards.
[4], [¢] Searches for a file.
During the slide show of picture files, touching
the buttons searches the audio file.
[
[
[
]
]
]
Reverses the picture horizontally.
Rotates counter clockwise.
Rotates clockwise.
[7]
Stops playing.
When touched twice, the disc is played from
its beginning when you play it the next time.
Disc
[38] Plays or pauses.
[Exit] Ends Picture Control.
English
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Music Disc/ Audio File Listening & Video File/ Picture File Watching
Movie Menu Control
Selects an option from the Movie Menu.
1
Display the playback screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
2
Display the Menu Control screen
3
Operation on the Menu Control screen
[SUB] Switches the subtitle language.
[Audio] Switches the voice language.
[Exit] Exits the Menu Control screen.
28
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod Control
You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP301V
(optional accessory). You can also display video contents on this unit when connecting an iPod with video.
Playback Screen
Easy Control Screen
Basic functions are available even when the
playback screen is displayed.
Displays the basic operation buttons on the
screen.
1
2
Display the Playback Screen
1
2
Display the Easy Control Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
See <How to Display the Easy Control Screen>
(page 17).
Operation on the Playback Screen
Operation on the Easy Control Screen
2
1
2
1
3
4
3
1, 3 Selects the music/video.
1, 2 Switches to the Playback screen.
2
Not effective
Displays/ Clears Source Information screen.
3
Displays the Source Control screen.
4
[1], [¡] Fast Forwards or Fast Backwards.
[4], [¢] Music/Video Search.
[38] Plays or pauses.
⁄
•
•
•
•
The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
Remove all accessories such as headphone before
connecting an iPod. You may not be able to control the
iPod if you connect it with accessories attached.
When you connect an iPod to this unit, playback starts
from the song you were playing on the iPod itself
(Resume Function).
If the played song is not a video content, "No Video
Signal" is displayed on the video screen.
English
29
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod Control
Multi Function
Source Control Screen
Switches to the source control screen to use
various playback functions.
1
2
Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 14).
[1/2] Switches the multi function display.
Operation on the Source Control Screen
[
[
]
Closes the multi function bar.
Opens the multi function bar.
1
]
[MUSIC] Displays the list of music category.
[VIDEO] Displays the list of video category.
[REP] Repeats the present file or data.
[RDM]* Starts or stops Random play.
[ARDM]* Starts or stops Album Random Play
(plays randomly from current album).
[38] Plays or pauses.
[INFO] Displays information screen of music/
video being played.
[1], [¡] Fast Forwards or Fast Backwards.
[4], [¢] Selects Music/Video.
[List] Displays the iPod list. (page 31)
[LINK]*
Searches for another song of
MUSIC
the currently selected artist. See <Link Search>
(page 31).
[
1
]
Switches to the playback screen.
Information display
⁄
Selects the Title, Artist Name, Album Name
or iPod Name.
* Disabled when VIDEO is being played.
"##### / #####" Total number of music in
the iPod and the music number display
"3" Play Mode Display
"P" Play Time Display
[
]
When
appears, the text display is
scrolled by touching it.
30
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod List
Link Search (Music file)
Lists and searches music/video contained in the
iPod.
Searches for another song of the currently
selected artist.
1
Display the Source Control Screen
1
Display the Source Control Screen
See <Source Control Screen> (page 30).
See <Source Control Screen> (page 30).
2
Display the iPod List
2
Start Link search
3
Select a song
3
Select music/video
1
1
1
Plays the touched song.
When appears, the text display is
1
Categories and music are listed.
Touch a category name to move to its lower
level. If music title is displayed, the music is
played by touching it.
When [38] is appeared, all the music in its
category is played by touching the button.
[
]
scrolled by touching it.
[
[
TOP] Moves to the top category.
CUR] Displays the currently playing
category.
[
]
When
appears, the text display is
[CTRL] Returns to the Source Control screen.
scrolled by touching it.
[
[
[
UP] Returns to previous category.
TOP] Moves to the top category.
CUR] Displays the currently playing
Scrolls to the position of the specified initial
category.
[CTRL] Returns to the Source Control screen.
Scrolls to the position of the specified initial
Scrolls to the selected initial.
Scrolls to the selected initial.
English
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Listening
Various control screens appear in the Tuner Source mode.
•
Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller mode switch>
(page 78).
Multi Function
Source Control Screen
Switches to the source control screen to use
various functions.
1
2
Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 14).
Operation on the Source Control Screen
1
[1/3] Switches the multi function display.
[
[
]
Closes the multi function bar.
Opens the multi function bar.
]
[P1] – [P6] When [P1] to [P6] buttons appear,
you can recall the stations on memory.
For memory of broadcasting stations, see
<Auto Memory> (page 34) or <Manual
Memory> (page 34).
[FM] Switches to the FM1/2/3 band.
[AM] Switches to the AM band.
[TI] Turns the Traffic Information function On or
Off. (Type 2/3 models only)
See <Traffic Information>, (page 36).
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
[4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency.
[List] Display the Tuner Preset List screen. See
<Preset Select> (page 33).
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 34).
1
Information display
Selects the Program Service Name, Title &
Artist name, Station Name, Radio Text Plus,
or Radio Text.
[PRE] Lists and selects memorized station.
[4Line]/ [2Line] Switches the number of lines
displayed in the Information Display.
"FM"/ "AM" Band display
"Preset" Preset number
"MHz"/ "kHz" Frequency display
[PTY]
Searches station by program
FM
type. (Type 2/3 models only)
See <Search by Program Type> (page 36).
[
]
When
appears, the text display is
[Mono]
reception. (Type 2/3 models only)
[CRSC] Turns the CRSC function On or
Selects the Monaural
FM
scrolled by touching it.
FM
Off. (Type 4/6 models only)
[LO.S] Turns the Local Seek function On or Off.
(Type 2/3 models only)
32
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
[NAME] Sets a name to the station. (Type 4/6
models only)
See <Set Station Name> (page 35).
Preset Select
Lists and selects memorized station.
1
2
Display the Source Control Screen
[TEXT]
(Type 2/3 models only)
See <Radio Text> (page 35).
Displays Radio Text screen.
FM
See <Source Control Screen> (page 32).
Display the Tuner Preset List Screen
Frequency Step Setting
(Type 4/ 6 models)
Changing the tuning frequency step. The original
setting is FM band 50 kHz, and AM band 9 kHz.
1
Switch the frequency step
While pressing [NAV] (DNX series)/ [TOP] (DDX
series) button and [0] button, press the Reset
button.
3
Select a station
Release your fingers from the buttons after the
display appears.
1
The frequency step changes to FM band 200
kHz, and AM band 10 kHz.
1
Memorized stations are displayed. Touch to
tune in.
[CTRL] Returns to the Source Control screen.
English
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Listening
Auto Memory
Manual Memory
Stores stations with good reception in memory
automatically.
Stores the current receiving station in memory.
1
2
Display the Source Control Screen
1
Display the Source Control Screen
See <Source Control Screen> (page 32).
See <Source Control Screen> (page 32).
Select a station you wish to store in
memory
2
Select a band you wish to store in memory
3
Select the Auto Memory mode
3
Store in memory
2 sec.
Continue to touch until the memory number
appears.
4
Start Auto Memory
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
⁄
•
The operation ends automatically if you do not operate
within 10 seconds.
34
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Text (Type 2/ 3 models)
Set Station Name (Type 4/ 6 models)
You can display the radio text. (Only when
receiving the FM broadcast)
Assigns a name to a station.
1
2
Tune in to the station to name
1
Select a station
See <Source Control Screen> (page 32).
See <Source Control Screen> (page 32).
Start Name set
2
Display the radio text
3
4
Enter the name
See <Character Entry> (page 42) for information
on how to enter a name.
1
End Name set
1
Selects the Program Service Name, Title &
Artist name, Station Name, Radio Text Plus, or
Radio Text for text display.
[
]
When
scrolled by touching it.
[5], [∞] Scrolls the text display.
appears, the text display is
English
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Listening
Search by Program Type
(Type 2/ 3 models)
Traffic Information (Type 2/ 3 models)
When a traffic bulletin starts, any source is
switched to the traffic information and it is
displayed automatically.
A program is tuned when you set its program
type. (Only when receiving the FM broadcast)
1
Display the Source Control Screen
1
Display the Source Control Screen
See <Source Control Screen> (page 32).
See <Source Control Screen> (page 32).
2
Set the Traffic information mode
2
Enter Program Type Search mode
When the traffic bulletin starts...
The Traffic Information screen appears
automatically.
3
Select a Program Type
Traffic Information screen
1
1
Program Type is displayed. Touch to select a
Program Type.
[Search] Searches for the program type.
It is displayed when the Program type is
selected.
⁄
•
It is necessary to have Traffic Information function set to
On in order to have the Traffic Information screen appear
automatically.
4
Search a station of the selected Program
Type
•
During the reception of traffic information the adjusted
volume is automatically remembered, so that the next
time it switches to traffic information the volume level is
that from the previously adjusted and remembered level.
36
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Watching
Various control screens appear in the TV source mode. You can only operate TV with the optional accessory
TV Tuner connected.
Function During TV Screen
Easy Control Screen
Basic functions are available even when the TV
screen is displayed.
Displays the basic operation buttons on the
screen.
1
2
Display the TV screen
1
2
Display the Easy Control Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
See <How to Display the Easy Control Screen>
(page 17).
Operation on the TV screen
Operation on the Easy Control Screen
2
1
2
1
3
4
3
1, 3 Selects a channel.
1, 2 Switches to the TV screen.
2
Switches to TV1 or TV2.
Displays/ Clears Source Information screen.
3
Displays the Source Control screen.
4
[BAND] Switches to TV1 or TV2.
[4], [¢] Selects a channel.
Use the [SEEK] to change the channel tuning
sequence.
⁄
•
The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
[SEEK] Switches the Seek mode. (page 38)
English
37
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Watching
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 39).
Source Control Screen
Switches to source control screen to use various
functions.
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
1
2
Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 14).
Operation on the Source Control Screen
1
[PRE] Lists and selects memorized station.
[NAME] Sets a name to the station. See <Set
Station Name> (page 40).
[BAND] Switches to TV1 or TV2.
[4], [¢] Select a channel.
Use the [SEEK] to change the channel tuning
sequence.
[List] Display the TV Preset List screen. (page
40).
[
1
]
Switches to the TV screen.
Information display
Channel information display
"TV" Band display
"Group" TV Area Group Display. See <TV
Setup> (page 77).
"Preset" Memory Number Display
"ch" Channel display
[
]
When
appears, the text display is
scrolled by touching it.
Multi Function
[1/2] Switches the multi function display.
[
[
]
Closes the multi function bar.
Opens the multi function bar.
]
[P1] – [P6] When [P1] to [P6] buttons appear,
you can recall channels on memory.
For memory of broadcasting stations, see
<Auto Memory> (page 39) or <Manual
Memory> (page 39).
38
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Memory
Manual Memory
Stores stations with good reception in memory
automatically.
Stores the current receiving channel in memory.
1
2
Display the Source Control Screen
1
Display the Source Control Screen
See <Source Control Screen> (page 38).
See <Source Control Screen> (page 38).
Select a station you wish to store in
memory
2
Select a band you wish to store in memory
3
Select the Auto Memory mode
3
Store in memory
2 sec.
Continue to touch until the memory number
appears.
4
Start Auto Memory
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
⁄
•
The operation ends automatically if you do not operate
within 10 seconds.
English
39
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Watching
Preset Select
Set Station Name
Lists and selects memorized station.
Assigns a name to a station.
1
2
Display the Source Control Screen
1
2
Tune in to the station to name
See <Source Control Screen> (page 38).
See <Source Control Screen> (page 38).
Start Preset Select
Start Name set
3
Select a station
1
3
4
Enter the name
See <Character Entry> (page 42) for information
on how to enter a name.
1
Memorized stations are displayed. Touch to
tune in.
Switches to the TV screen.
[CTRL] Returns to the Source Control screen.
End Name set
[
]
40
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth Audio Control
You can listen to audio files stored in Bluetooth audio player and cell-phone.
It is necessary to connect the optional Bluetooth unit KCA-BT200.
•
You need to register your audio player and cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction
manual of the Bluetooth Unit as well.
Before Use
Source Control Screen
•
•
•
You need to register your audio player and cell-phone
before using it with this unit. For more details, see
<Registering Bluetooth Unit> (page 67).
If you have registered two or more audio players or cell-
phones, you need to select one of them. For more details,
see <Bluetooth Unit Connection> (page 69).
Switches to control screen to use various
functions.
1
2
Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 14).
Sound Output speaker can be set. See <Bluetooth
Hands-Free/Audio Output Setup> (page 69).
Operation on the Source Control Screen
[3] Plays.
[7] Stops playing.
[8] Pauses.
[4], [¢] Selects a file.
⁄
•
If the Bluetooth Audio player does not support AVRCP
profile, buttons are not displayed. Operate from the
Audio player.
English
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Other Functions
Muting Audio Volume upon Reception of
Phone Call
Character Entry
Character Entry screen
When a telephone call is received...
The Phone Call ("CALL") screen appears, and
system is paused.
1
Phone Call ("CALL") screen
1
Enters characters.
[2], [3] Shifts the cursor.
[5], [∞] Scrolls up or down the character
button display.
[QWE]/ [ABC] Sets the key layout of the
character buttons.
When the call ends...
Hang up the phone.
ABC : Alphabetical key layout.
QWE : Qwerty key layout.
The system resumes playing automatically.
[Clear] Clears the character.
If you erase a character, locate the cursor on it
and touch this button.
⁄
•
To use the TEL Mute feature, you need to hook up
the MUTE wire to your telephone using a commercial
telephone accessory. Refer to <INSTALLATION MANUAL>.
Playback of the source output at the AV OUTPUT port
may not be paused even a call comes in.
If touched more than 1 second, all the input
characters are erased.
•
[Space] Enters a space.
⁄
•
You can enter characters only after you have applied the
parking brake.
42
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Control
Setting the monitor screen.
"NAV-SYNC": Turning the Dimmer function
On or Off according to the
Screen Control
1
Display the Easy Control Screen
Navigation Day/Night display
setting. (DNX series and DDX
series with navigation unit only)
See <How to Display the Easy Control Screen>
(page 17).
[Mode] Selects a screen mode.
You can select any of the following screen
mode.
2
Display the Screen Control Screen
"Full", "Just", "Zoom", "Normal"
⁄
•
The Screen Control screen is displayed only when you
have applied the parking brake.
•
•
The picture quality can be set for each source.
You can set image quality of screens such as menu from
<Screen Adjustment> (page 66).
3
Adjust the picture quality
Full picture mode ("Full")
Justify picture mode ("Just")
Zoom picture mode ("Zoom")
Normal picture mode ("Normal")
[Bright] Brightness Control
[Tint] Tint Control
Displayed for an NTSC system image on Video,
iPod, TV or Rear View Camera.
[Color] Color Control
Displayed on Video, iPod, TV or Rear View
Camera screen only.
[Contrast] Contrast Control
[Black] Black Level Adjustment
[Sharpness] Sharpness control
Displayed on Video, iPod, USB, TV or Rear View
Camera screen only.
[Dimmer] Dimmer Mode Setup
"ON": The display dims.
"OFF": The display doesn’t dim.
"SYNC": Turning the Dimmer function On or
Off when the vehicle light control
switch is turned On or Off.
English
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Hands-Free Phoning
Various functions can be used in the Hands Free control mode.
It is necessary to connect the optional Bluetooth unit KCA-BT200.
•
•
You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the
Bluetooth Unit as well.
To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of
your Bluetooth Unit and your cell-phone.
Before Use
Downloading the Phonebook
•
•
•
•
You need to register your cell-phone before using it with
this unit. For more details, see <Registering Bluetooth
unit> (page 67).
If you have registered two or more cell-phones, you need
to select one of them. For more details, see <Bluetooth
Unit Connection> (page 69).
To use the Phone Book, it must be downloaded to this
unit in advance. For details, see <Downloading the
Phonebook> (page 44).
Sound Output speaker can be set. See <Bluetooth
Hands-Free/Audio Output Setup> (page 69).
Downloads the phonebook data from the
cell-phone to this unit so that you can use the
Phonebook of this unit.
1
By operating the cell-phone, send the
phonebook data to this unit
2
By operating the cell-phone, start the
hands-free connection
⁄
•
For the cell-phones which support auto-download of
phonebook:
If the phonebook is not downloaded automatically for
some reasons, follow the procedure above to download
manually.
•
•
•
For how to operate the cell-phone, refer to the
Instruction Manual that comes with your cell-phone.
Up to 1000 phone numbers can be registered for each
registered cell-phone.
Up to 32 digits can be registered for each phone number
along with up to 50* characters representing a name.
(* 50: Number of alphabetical characters. Fewer
characters can be input depending on the type of
characters.)
•
Depending on the type of your cell-phone, the following
restrictions are placed:
-
-
-
The phonebook data cannot be downloaded normally.
Characters in the Phonebook are garbled.
The phonebook data cannot be downloaded normally
if it contains images. It may take several hours to a full
day to download the phone book depending on the
total image size.
•
To cancel downloading of the phonebook data, operate
the cell-phone.
44
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving a Call
Call Waiting
[
[
]
]
Answering a Phone Call
[
[
]
]
• Answering another incoming call with
the current call suspended
• Switching between the current call and
waiting call
Each touch of this button switches the
calling party.
Rejecting an Incoming Call
⁄
•
While monitoring the rear view camera, this screen is
not displayed even a call comes in. To display this screen,
press the [TEL] button or return the shift knob of car to
the drive position.
• Answering another incoming call after
terminating the current call
• Answering the waiting call after
terminating the current call
During a Call
[
]
Switches the voice output between
phone and speaker.
[DTMF] Outputs dial tone. See <Controlling
Tone-based Services> (page 49).
[
]
Disconnecting a call
English
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Hands-Free Phoning
Making a Call
[Voice] Starts voice recognition.
See <Calling by Voice Recognition> (page 48).
Displaying the control screen and using various
functions.
[BT SETUP] Displays the Bluetooth SETUP
screen. See <Registering Bluetooth Unit>
(page 67).
1
Display the Hands-Free Control screen
[TEL SETUP] Displays the Hands Free Setup
screen. See <Setting Up the Hands-Free
Phone> (page 50).
TEL
AV OUT
⁄
•
While your car is moving, some functions are disabled
due to safety reasons. The buttons associated with the
disabled functions become ineffective if pressed.
2
Select a dialing method
•
•
When the Hands-Free Control screen appears, the name
of the connected cell-phone is displayed for 5 seconds.
1
The status icons such as
and
displayed on the
control unit may discord from those displayed on the
cell-phone.
•
Setting the cell-phone in the private mode can disable
the hands-free function.
1
Calls the displayed phone number. If you
have registered a phone number in the
Phonebook, the destination person name is
displayed.
[
]
Calls the displayed phone number.
[Redial] Displays the previously called phone
number.
[Preset1], [Preset2], [Preset3] Displays the
preset phone number.
For information on how to preset a phone
number, see <Phone Number Preset> (page
53).
[
[
[
[
Phonebook] Displays the Search
for Phonebook screen. See <Calling by
Phonebook> (page 47).
Outgoing Calls] Displays the Outgoing
Calls screen. See <Making a Call Using Call
Records> (page 48).
Incoming Calls] Displays the Incoming
Calls screen. See <Making a Call Using Call
Records> (page 48).
Missed Calls] Displays the Missed
Calls screen. See <Making a Call Using Call
Records> (page 48).
[Direct Number] Displays the Dialing Display
screen. See <Calling by Entering a Phone
Number> (page 47).
46
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling by Phonebook
Calling by Entering a Phone Number
You can call a person using his/her phone
number that you have registered in the
Phonebook.
Makes a call by entering a phone number.
1
2
Display the Hands-Free Control screen
See <Making a call> (page 46).
1
Display the Hands-Free Control screen
Display the number input screen
See <Making a call> (page 46).
2
Display the Phonebook screen
3
Enter a phone number
3
Select the name to call
1
2
1
1
Enters the desired phone number using the
keypad.
[Clear] Clears the number.
1
2
Phonebook data list.
4
Make a call
Displays the Phonebook beginning with the
name whose first character you have touched.
When appears, the text display is
scrolled by touching it.
[
]
Press the green phone icon to dial the entered
phone number.
4
Select the phone number to call
⁄
•
•
You can input up to 32 digits.
This function is unavailable while driving.
5
Make a call
⁄
•
•
This function is unavailable while driving.
To use the Phonebook, it must have been downloaded
from the cell-phone. For more details, see the instruction
manual of your Bluetooth Unit and your cell-phone.
Initials including no corresponding name will not be
displayed.
•
•
During search, a non-accent character such as "u" is
searched for instead of an accent character such as "ü".
English
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Hands-Free Phoning
Making a Call Using Call Records
Calling by Voice Recognition
Calls by selecting a phone number from the
outgoing, incoming, or missed calls list.
Calls by recognizing the registered voice.
⁄
1
Display the Hands-Free Control screen
•
In order to perform voice recognition, voice must
be registered in the Phonebook data. See <Voice
Registration> (page 51). Or, to perform voice recognition
by Phone number category (Home, Office, Mobile etc.)
of Phonebook data, a key word voice must be registered.
See <Key Word Voice Registration> (page 52).
See <Making a call> (page 46).
2
Display the Outgoing Calls, Incoming Calls,
or Missed Calls screen
1
Display the Hands-Free Control screen
See <Making a call> (page 46).
2
Display the Voice Recognition screen
3
Select from calls list
Example : Outgoing Calls screen
7 If there is only one phone number assigned
under the registered name
3
Say the name registered in the Phonebook
Calls the selected phone number.
4
Make a call
When a beep is heard, say the name within 2
seconds.
⁄
•
The Outgoing Calls list screen, Incoming Calls list,
4
Make a call
or Missed Calls list screen shows the list of the calls
originated from or received at this unit. They are not the
ones stored in the cell-phone memory.
48
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
7 If there are more than one phone numbers
Controlling Tone-based Services
assigned under the registered name
Uses tone base service using DTMF (Dual Tone
Multi Frequency).
5
Say the key word registered for the
category
1
2
Display the Talking screen
See <Calling by Entering a Phone Number>
(page 47).
Display the DTMF input screen
When a beep is heard, say the key word within
2 seconds.
6
Make a call
3
You can send tones during a call
7 If there are more than one phone numbers
registered under the same name, go to step 7.
7
Select a Phone number category
Selects the Phone number category.
8
Make a call
⁄
•
A message is displayed if the voice is not recognized.
Read the message for the further operation.
English
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Hands-Free Phoning
[SMS Use] Sets the SMS function. ( "ON")
"ON": Use SMS function.
"OFF": SMS not available.
Setting Up the Hands-Free Phone
The Hands-Free system can be set as follows.
1
2
Display the Hands-Free Control screen
[Key Word] Registers the voice to select phone
number category with voice recognition.
See <Key Word Voice Registration> (page 52).
See <Making a call> (page 46).
Display the Hands Free Setup screen
[Use Phone Voice Recognition]
Sets whether to dial using the phone voice
recognition function. ( "ON")
⁄
•
Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
3
Set each item
[Auto Response] Sets an automatic response
time to pick-up an incoming call. ( "8")
"OFF": This function is disabled.
"0-99": Sets the incoming call ringing duration
(in seconds).
[Call Beep] Sets the beep of the incoming call.
(
"ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[SMS Receive Beep] Sets the beep of the
incoming SMS. ( "ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[Phone Information Use] Sets whether to
use cell-phone phonebook, outgoing calls list,
incoming calls list and missed calls list.
(
"ON")
"ON": Yes.
"OFF": No.
50
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
6
End voice registration
Voice Registration
Registers voice for voice recognition in
Phonebook. Up to 35 voices can be recorded in
one cell-phone.
1
Display the Phonebook Detail screen
Go through the procedure of <Calling by
Phonebook> (page 47).
2
Select the name to register
⁄
•
A message is displayed if the voice is not recognized.
Read the message for the further operation.
•
Repeat from 1st try if the voice is different from the 1st
try.
1
1
Selects a name.
[Record] Registers the voice for voice
recognition to the selected Phonebook. If
there are already 35 voice tag registered
in the same cell-phone, [Record] button is
deactivated.
[Play] Plays the voice registered in the selected
Phonebook data.
[Delete] Deletes the voice registered in the
selected Phonebook data.
Touch to display the confirmation screen.
Touch [Yes] to delete or [No] to cancel.
3
4
Display the voice registration screen
Say the name to register (1st try)
Say within 2 seconds after the Beep.
5
Say the name to register (2nd try)
Say within 2 seconds after the Beep.
English
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Hands-Free Phoning
5
Say the phone category to register (1st try)
Key Word Voice Registration
Registers the voice to select the Phone number
category by Voice Recognition.
1
2
Display the Hands Free Setup screen
See <Setting Up the Hands-Free Phone> (page
50).
Display the Key Word List screen
Say within 2 seconds after the Beep.
6
7
Say the phone category to register (2nd try)
Say within 2 seconds after the Beep.
End voice registration
3
Select the Phone number category to
register
1
⁄
•
A message is displayed if the voice is not recognized.
Read the message for the further operation.
•
Repeat from 1st try if the voice is different from the 1st
try.
1
Selects the Phone number category.
"REC" turns on for data with voice for voice
recognition already registered.
[Record] Registers voice for the selected
Phone number category.
[Play] Plays the voice registered for the
selected Phone number category.
[Delete] Deletes the voice registered for the
selected Phone number category.
Touch to display the confirmation screen.
Touch [Yes] to delete or [No] to cancel.
4
Display voice registration screen
52
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Register phone number
Phone Number Preset
Registers frequently used phone number to
Hands Free control screen preset button.
1
Display the Hands-Free Control screen
See <Making a call> (page 46).
2
Select the Preset number to register
1 sec.
⁄
•
If no Preset number is registered, pressing this button
momentarily moves to the step 3.
3
Select the search destination of the number
to register
[
[
[
[
[
[
]
]
]
]
]
]
Registers from SMS received message list.
Registers from SMS sent message list.
Registers from Phonebook.
Registers from outgoing calls list.
Registers from incoming calls list.
Registers from missed calls list.
[Direct Number] Registers by entering phone
numbers.
[Voice] Registers voice for voice recognition to
preset number.
[Memory] Registers the currently displayed
phone number.
[Delete] Deletes the currently displayed phone
number. Touch to display the confirmation
screen. Touch [Yes] to delete or [No] to cancel.
4
Search phone number to register with each
function
English
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Hands-Free Phoning
SMS Message screen
SMS (Short Message Service)
Uses SMS function.
1
2
Display the Hands-Free Control screen
See <Making a call> (page 46).
Display the SMS Select screen
[
SMS] Creates a new message for the
selected message.
3
Select a function
[
]
Displays the SMS create menu screen.
See <Create a message>.
[
[
[
]
]
]
Displays received message list.
Displays sent message list.
Displays the SMS Create Menu screen.
See <Create a message>. The button will be
active when any message has been created
after power-on.
[Download] Retrieves SMS messages from the
cell-phone.
4
Select a message to display
1
1
Calls the number in the selected message.
[DISP] Displays the selected message.
54
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Create a message
4
Send the message
1
Enter phone number / Select contact
[
]
Select a contact from the phonebook.
[Direct Number] Enter the phone number.
[SET] Display the Create SMS Message screen.
[Send] Sends the message.
[Delete] Deletes the Draft message.
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
2
3
Display the Create SMS Message screen
Create a message
1
1
Enters characters.
[2], [3] Moves the cursor.
[5], [∞] Scrolls up or down the character
button display.
[QWE]/ [ABC] Sets the key layout of the
character buttons.
ABC : Alphabetical key layout.
QWE : Qwerty key layout.
[Clear] Erases the entered character.
If touched more than 1 second, all the input
characters are erased.
[Space] Enters a space.
[SET] Saves the message and returns to the
Create SMS Menu screen.
Only one draft message can be saved /
retained in memory at any one time.
English
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Audio Control
Audio Control Menu
Audio Control
Displays the Audio Control menu to set the sound
effect function of this unit.
You can adjust the front/rear and right/left audio
balance.
1
Display the Source Select Screen
1
Display the Audio Control screen
Touch [ ] > [
] > [Audio Control]. (page 56)
2
Set each item
SRC
1
2
Display the Audio Control menu
1
Adjusts the front/back and left/right balance
of the volume by touching the Adjust screen.
[2], [3] Adjusts the right and left volume
balance.
[5], [∞] Adjusts the front and rear volume
balance.
[VOL.Offset] Finely adjust the volume of the
current source to minimize the difference in
volume between different sources.
In this manual, the above selection is indicated
as:
⁄
•
If you have increased the volume first, then reduced
the volume using the "VOL. Offset", the sound
generated if you suddenly switch to another source
may be extremely loud.
Touch [ ] > [
].
3
Select the Audio Control item
[Subwoofer Level] Adjusts the subwoofer
volume.
The setting is available when subwoofer is set
to "ON". See <Speaker Setup> (page 72).
[Loudness] Turns the loudness control
function On or Off.
If turned "ON", high and low tones are
automatically enhanced during low volume.
Settable only when zone function is set to Off.
See <Zone Control> (page 58).
Item
Page
56
57
57
58
[Audio Control]
[Equalizer]
[Tone]
[Stream Information] Displays the present
source information.
[Zone Control]
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.
56
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Equalizer Control
Tone Setup
You can set up the equalizer.
You can set a Tone curve.
1
2
Display the Equalizer screen
1
2
Display the Equalizer screen
Touch [ ] > [
] > [Equalizer]. (page 56)
Touch [ ] > [
] > [Equalizer]. (page 56)
Set each item
Display the Tone Control screen
3
Set the Tone
[SystemQ] Selects an equalizer curve type.
You can select any of the following equalizer
curves.
"Natural"/ "Rock"/ "Pop"/ "Easy"/ "Top40"/
"Jazz"/ "User"
[Bass] Bass adjustment items are displayed.
⁄
[Middle] Middle adjustment items are
displayed.
•
"User":
Your own tone curve can be created. See <Tone
Setup> (page 57).
[Treble] Treble adjustment items are displayed.
[Flat] Tone level becomes 0 (flat).
[FREQ] Sets the Center frequency.
[Level] Sets the level.
[SystemQ-EX] Selects items to be adjusted for
tone curve setup.
If selected "OFF", only Level can be set up for
tone curves.
[Q Factor] Sets the Q factor. (Only [Bass] and
[Middle] can be set)
[Tone] Displays the Tone curve setup screen.
(page 57)
[Bass DC EXT] Bass DC Extend settings. (Only
[Bass] can be set)
If turned "ON", it extends the bass center
frequency to the low register by approximately
20%.
[SW Level] Adjusts the subwoofer volume.
The setting is available when subwoofer is set
to "ON". See <Speaker Setup> (page 72).
English
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Control
Zone Control
You can set the front and rear audio source.
1
2
Display the Zone Control screen
Touch [ ] > [
] > [Zone Control]. (page 56)
Set the Zone Control
[Single Zone] Sets the unit to single zone.
[Dual Zone] Sets the unit to dual zone.
[Front Source] Sets the front audio source.
[Rear Source] Sets the rear audio source.
⁄
•
When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is
also switched to the same source.
[Rear VOL.] Adjusts the volume of the rear
channel.
⁄
•
There are following limitations when zone function is set
to "ON".
- There is no output from the subwoofer.
- <Equalizer Control> (page 57) and <Speaker Setup>
(page 72) are not available.
58
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
You can set up various receiver parameters.
How to Display SETUP Menu Screen
Item
Page
[Information]
[DivX(R)]
[Software]
[System]
Displays the Setup menu to set various functions.
60
60
1
Display the Source Select Screen
[User Interface]
[Touch]
[Clock]
[Security]
[SETUP Memory]
61
62
62
63
63
SRC
[Display]
[Background]
[Color]
64
65
66
67
77
73
76
76
77
70
71
2
Display the Setup Menu Screen
[Screen Adjust]
[Bluetooth SETUP]
[TUNER SETUP]
[DVD SETUP]
[iPod SETUP]
[USB SETUP]
[TV SETUP]
[AV-IN SETUP]
[Navigation]
[Audio SETUP]
[Speaker Select]
[AV Interface]
72
70
In this manual, the above selection is indicated
as:
Touch [ ] > [
].
3
Select the setup item
[5], [∞] Scrolls the setup menu.
⁄
•
[AV-IN SETUP], [Navigation] and [Audio SETUP] options
can be locked. The key mark ( ) is displayed in reverse
video for the locked option. See <Setup Memory> (page
63).
English
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Setup Menu
DivX Setup
Software Information
Checks the registration code. This code is needed
when making a disc which has DRM (Digital
Rights Management).
Checks the software version of this unit.
1
Display the Software Information screen
Touch [ ] > [
] > [Information] >
1
Display the DivX Setup screen
[Software]. (page 59)
Touch [ ] > [
] > [Information] > [DivX].
(page 59)
Displays the software version.
⁄
Displays the registration code.
•
For how to update the software, refer to the relevant
update procedure manual which comes with the
software.
⁄
•
When downloading a DivX VOD file controlled by DRM,
register the code appeared on the screen such as the
one above. Otherwise the file may not be able to play
with this unit. Remaining number of viewing is displayed
when playing a DivX VOD file with the viewing restriction.
When the remaining number of viewing reached 0, a
warning message appears and the file cannot be played.
60
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
User Interface
Language Setting
You can setup user interface parameters.
You can select the display language for the
control screen and audio file tags.
1
Display the User Interface screen
1
2
Display the User Interface screen
Touch [ ] > [
Interface]. (page 59)
] > [System] > [User
Touch [ ] > [
] > [System] > [User
Interface]. (page 59)
2
Set each item
Display the Language Setting screen
3
Select a language
[Beep] Turns the key touch tone On or Off.
"ON")
[Select Mode] Selects language select mode.
(DNX series only) ( "Easy")
(
[Remote Sensor] Selects a remote control
signal. ( "ON")
When turned "OFF", the remote control of TV
reception is rejected.
"Easy" : Language to display text and tag
information, and language for GUI can
be selected.
Navigation language is set to that
selected in [Text Language Select].
"Advanced" : Language to display text and
tag information, language for
[Language] Select the language used for the
control screen and setting items. (page 61)
[Scroll] Allows scrolling of text display on the
Source Control screen. ( "Manual")
"Auto": Scrolls the screen automatically.
"Manual": Allows you to scroll the screen
manually.
GUI, and language for navigation
information can be selected.
[Text Language Select] Selects the language
to display text information of the selected
source and tag information of the audio/video
files.
[Marker] Sets whether to display the target
when touching the panel. ( "OFF")
(
"British English")
[Drawer Close] Sets whether to close the
function bar automatically. ( "Manual")
[GUI Language Select] Selects the language
used for the control screen, setting menu and
so forth. ( "Local")
"Local" : Sets the language to that selected in
[Text Language Select].
[FNC Key Longer than 1 Second] Sets the
function of the [FNC] button.
(
"R-CAM")
"V.OFF" : Press the [FNC] button for more than
1 second to turn the display off.
"R-CAM" : Press the [FNC] button for more than
1 second to switch to rear view.
"English" : Sets the language to English.
[Enter] Determines the selected language.
[Cancel] Cancels the selected language.
[Animation] Sets whether to display
animation. ( "ON")
Next page 3
English
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
When [Select Mode] is set to "Advanced"
(DNX series only)
Clock Setup
You can adjust the clock time.
1
Display the Clock Setup screen
Touch [ ] > [
] > [System] > [Clock].
(page 59)
[Navigation Language Select] Selects the
language used for navigation.
2
Setup the Clock
(
"British English")
1
2
Touch Panel Adjustment
You can adjust the touch panel operations.
1
Display the Touch panel Adjustment screen
Touch [ ] > [
(page 59)
] > [System] > [Touch].
1
2
Adjusts hours.
Adjusts minutes.
2
Adjust the Touch panel
[Reset] Sets "00" minute.
Setup examples: 3:00 – 3:29 \ 3:00
3:30 – 3:59 \ 4:00
[Synchronize] Sets the clock time in
synchronization with the time data sent from
the navigation system or the RDS station.
(
DNX series: "Navigation",
DDX series Type 2/ 3 models : "RDS"
DDX series Type 4/ 6 models : "OFF")
"OFF"/ "RDS"*1/ "Navigation"
When the synchronized mode is set, the clock
cannot be adjusted manually.
Follow the instruction on the screen and touch
the center of
.
[Cancel] Cancels the adjustment and returns
to the Touch Panel Adjust screen.
⁄
[Reset] Resets to the initial status.
•
*1 Type 2/ 3 models only
3
Adjust the clock time
62
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Security Indicator Setup
Setup Memory
Setting the security indicator to ON helps to
protect your receiver system against theft.
Audio Control, AV-IN SETUP, AV Interface,
Navigation, and Audio SETUP settings can be
memorized. The memorized settings can be
recalled at any time. For example, even when the
settings are cleared due to replacement of the
battery, the settings can be restored.
1
Display the Security screen
Touch [ ] > [
] > [System] > [Security].
(page 59)
1
Display the SETUP Memory screen
Touch [ ] > [
] > [System] > [SETUP
Memory]. (page 59)
2
Start Setup Memory
[SI] Turns the SI function on or off.
If turned "ON", the security indicator on the
front panel flashes when the vehicle ignition is
off. ( "ON")
[Lock] Locks the AV-IN SETUP, Navigation,
and Audio SETUP settings. When [Lock] is
selected, you cannot change the AV-IN SETUP,
Navigation, and Audio SETUP settings.
[Yes] Memorizes or recalls the settings.
[No] To cancel the function, touch [No]. To
cancel memorization, touch [No].
The SETUP Menu screen appears again.
3
Select a desired function
[Recall] Recalls the memorized settings.
[Memory] Memorizes the current settings.
[Clear] Clears the currently memorized
settings.
Next page 3
English
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
4
Memorize or recall the settings
Entering Background
Loads a image from the connected USB device
and sets it for the background image.
When memorizing the Audio Setup and AV
Interface settings:
1
Connect the device which has the image
to load
If settings have already been memorized, a
confirmation message appears. Touch [Yes]. To
cancel memorization, touch [No].
2
Display the Background screen
Touch [ ] > [
] > [Display] >
[Background]. (page 59)
When recalling the memorized settings:
3
Display the Background Memory screen
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel recalling, touch
[No].
When clearing the currently memorized
settings:
[Change] Selects a image for background.
[Delete] Deletes the background image.
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
5
Quit memorization/recalling of settings
4
Select a medium (USB device)
5
Select the image to load
1
1
Lists the files.
When appears, the text display is
[
]
scrolled by touching it.
[
[
ROOT] Moves to the top hierarchy level.
UP] Moves up a hierarchy level.
64
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Load the image
Panel Color Coordinate
Sets the button illumination color.
1
Display the Color screen
1
Touch [ ] > [
] > [Display] > [Color].
(page 59)
2
Display the Panel Color Coordinate screen
1
Rotates the image.
⁄
•
•
•
See <About Picture files> (page 6) for readable image
specifications.
The [Memory] button on the “Background” screen
becomes active only in STANDBY source mode.
Pressing the [Memory] button on the “Background”
screen switches the AV OUT source to OFF.
For resetting the AV OUT source, refer to <AV Interface
Setup> section.
[Initialize] Initialization resets the settings
made using the Panel Color to the default
settings made at the factory.
•
While loading the Background image, any other
operation is prohibited.
[Panel Color Scan] When set to "ON", the
illumination color of the buttons changes one
after another.
Background Change
Selects a image for background.
⁄
•
When touching [SET] or [Initialize], make sure [Panel
Color Scan] is set to "OFF".
1
Select Background Change screen
3
Select a color
1
2
Select a image for background
1
1
Sets to the touched color.
[Adjust] Sets and registers favorite color to the
preset buttons ([P1] – [P3]).
1
Returns to the initial background.
3
Set the image as the background
Next page 3
English
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
To register your original color
Screen Adjustment
1
Start the RGB coordinate
You can adjust the screen mode of the monitor.
1
Display the Screen Adjust screen
Touch [ ] > [
] > [Display] > [Screen
Adjust]. (page 59)
2
Adjust each color value
2
Set each item
1
1
Selects a preset number to register.
[Red Value] Adjusts the Red value.
[Green Value] Adjusts the Green value.
[Blue Value] Adjusts the Blue value.
[Bright] Brightness Control
[Contrast] Contrast Control
[Black] Black Level Adjustment
[Dimmer] Dimmer Mode Setup
"ON": The display dims.
3
Select a Preset number to register
"OFF": The display doesn’t dim.
"SYNC": Turning the Dimmer function On or
Off when the vehicle light control
switch is turned On or Off.
"NAV-SYNC": Turning the Dimmer function
On or Off according to the
2 sec.
Navigation Day/Night display
setting. (DNX series and DDX
series with navigation unit only)
Adjusted color is registered to the selected
Preset button.
⁄
4
Complete the color coordination
•
In this Screen Adjust screen, you can perform setups for
the menu screen. Setups for videos such as DVD can be
performed on the <Screen Control> (page 43).
66
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Select the Bluetooth unit to register
Registering Bluetooth Unit
Registers the Bluetooth unit to be connected.
1
1
Display the Bluetooth Setup screen
Touch [ ] > [
] > [Bluetooth SETUP].
(page 59)
2
Display the Connect Device List screen
1
Displays the searched Bluetooth unit.
[Search] Searches for a Bluetooth unit.
[Cancel] Cancels searching of Bluetooth unit.
5
Enter PIN code
1
3
Search for a Bluetooth unit
1
1
Enters a code number using the keypad.
[Enter] Confirms the entered PIN code. Enter
the PIN code specified for the Bluetooth unit
you are registering.
This button will not be active until at least four
PIN code digits have been entered.
1
Displays the registered Bluetooth units.
The busy service becomes active. The available
service becomes inactive.
[Cancel] Cancels registration of PIN code.
[Clear] Clears the code number.
[
]
When
appears, the text display is
scrolled by touching it.
[Search] Searches for a Bluetooth unit.
⁄
•
You can also register from the Bluetooth unit side. For
[SP DEV] Registers a Bluetooth unit that
cannot be registered by normal register
(pairing) operation.
the PIN code necessary for registration, see <Registering
Bluetooth Unit PIN Code> (page 68).
•
If the error message appears even though the PIN code is
correct, try <Registering Special Bluetooth Unit>.
⁄
•
A new device cannot be registered if there are
already 5 Bluetooth units registered. Delete
unnecessary registration. See <Bluetooth Unit
Connection> (page 69).
Next page 3
English
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
Registering Special Bluetooth Unit
Registers Special Bluetooth unit, that resulted
in error by normal registration method, by
selecting from the listed models.
Registering Bluetooth Unit PIN Code
Sets the PIN code of the Bluetooth unit to enter
when registering (pairing) from the cell-phone or
audio player side.
1
Display the Special Device List screen
1
Display the Bluetooth Setup screen
Touch [ ] > [
] > [Bluetooth SETUP].
(page 59)
2
Select a model name
2
Display the Receiver PIN Code screen
Displays the Bluetooth unit name that can be
registered.
3
Enter PIN code
3
Confirm whether to register
1
1
Enters a code number using the keypad.
[Cancel] Cancels registration of PIN code.
[Enter] Registers the entered PIN code.
[Clear] Clears the code number.
⁄
•
Only models in Bluetooth unit name list can be
registered.
4
Go through the procedure of <Registering
Bluetooth Unit> and complete the
registration (pairing)
68
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth Hands-Free/Audio Output
Setup
Bluetooth Unit Connection
Selects the Bluetooth unit to connect.
Selects speakers to output the sound of hands-
free phoning (such as phone call voice and
ringing tone) and Bluetooth audio.
1
Display the Bluetooth Setup screen
Touch [ ] > [
] > [Bluetooth SETUP].
(page 59)
1
Display the Bluetooth Setup screen
2
Display the Connect Device List screen
Select a registered Bluetooth unit
Select the service to use
Touch [ ] > [
] > [Bluetooth SETUP].
(page 59)
3
[Bluetooth HF/Audio] Sets the output
speakers. ( "Front Only")
"Front Only" : Outputs from the front speakers.
"All" : Outputs from all the speakers.
4
[TEL (HFP)] Connects/disconnects cell-phone
to use for Hands Free.
[Audio (A2DP)] Connects/disconnects Audio
player to use for Bluetooth Audio.
[Remove] Deletes registration (pairing).
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
English
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
AV Input Setup
AV Interface Setup
You can set AV input parameters.
You can set audio and visual (AV) interface
parameters.
1
2
Display the AV-IN Setup screen
1
Display the AV Interface screen
Touch ] > [
] > [AV-IN SETUP]. (page 59)
Touch [ ] > [
] > [AV Interface]. (page 59)
Set each item
2
Set each item
[On Screen AV-IN] Sets an on-screen display
of the AV-IN playback screen. ( "Auto")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
[AV-OUT] Selects an AV source to be output at
the AV OUTPUT port. ( "AV-IN1")
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display.
(
"OFF")
[iPod AV Interface Use] Sets the terminal to
which the iPod is connected to. ( "iPod")
"ON": Switches to the rear camera video
display when "Reverse" gear is engaged.
"OFF": The monitor does not switch to the
rear view camera video display even
when engaging the shift knob of car to
"Reverse".
[AV-IN1 Name], [AV-IN2 Name] Sets a name
to be displayed when you select a system that
is connected via the AV INPUT port.
(
"VIDEO")
⁄
⁄
•
When in DVD source, "AV-OUT" cannot be set to USB.
When in USB source, "AV-OUT" cannot be set to DVD.
•
[iPod AV Interface Use]
This item can be set when in STANDBY source and also
the iPod is unconnected.
•
[AV-IN Name]
One AV-IN name is displayed when "iPod" is selected in
[iPod AV Interface Use] and two are displayed when not
selected.
70
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
[On Screen Navigation] Sets an on-screen
display of the navigation screen. ( "OFF")
(DDX series only)
Navigation Setup
You can set Navigation parameters.
"Auto": Information is displayed for 5 seconds
when updated.
"OFF": Information is not displayed.
1
2
Display the Navigation Setup screen
Touch [ ] > [
] > [Navigation]. (page 59)
Set each item
⁄
•
[On Screen Navigation]
It can be set only when [Navigation Input] is set to "AV-
IN".
[NAV Interrupt Speaker] Selects speakers
used for voice guidance of the navigation
system.
(
"Front All")
"Front L": Uses the front left side speaker for
voice guidance.
"Front R": Uses the front right side speaker for
voice guidance.
"Front All": Uses both front speakers for voice
guidance.
[NAV Voice Volume] Adjusts the volume for
voice guidance of the navigation system.
(
DNX series: "25", DDX series: "21")
[NAV Mute] Mutes the volume during voice
guidance of the navigation system.
(
"ON")
When turned "ON", the volume level drops for
voice guidance.
[Navigation Input] Selects a navigation
system connection.
(
"RGB") (DDX series only)
"RGB": Allows the Kenwood’s Navigation
System to connect via its interface
cable.
"AV-IN": Allows a third-party navigation system
to connect via the AV INPUT1 port.
"OFF": Must be used if no navigation system is
connected.
(The navigation display is cancelled
when the AV source is switched.)
English
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
Crossover Network Setup
You can set a crossover frequency of speakers.
Speaker Setup
You can select a speaker type and its size to get
the best sound effects.
1
Select the speaker to set the crossover
1
2
Display the Speaker Select screen
Touch [ ] > [ ] > [Audio SETUP] >
1
[Speaker Select]. (page 59)
2
Select a speaker you wish to adjust
3
When the speaker type and size are set, the
speaker crossover network and equalizer curve
are set automatically.
1
2
3
Sets the High Pass Filter of the front speaker.
Sets the High Pass Filter of the rear speaker.
Sets the Low Pass Filter of the sub woofer.
1
2
3
Display the Crossover setup screen
2
3
Set the crossover
1
2
3
Front speaker
Rear speaker
Subwoofer
[Subwoofer] Sets the availability of
subwoofers.
[X'over] Displays the Speaker Crossover Setup
screen.
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
[Phase] Sets the phase of subwoofer output.
The phase is reversed 180 degrees when set
to "Reverse".
Sets the subwoofer phase. (Only when
"Subwoofer" is set to "ON" in Speaker Setup,
and [LPF FREQ] is set to other than "Through")
3
Select a speaker type
[HPF FREQ] High Pass Filter adjustment.
(When front or rear speaker is selected on
Speaker Select screen)
[LPF FREQ] Low Pass Filter adjustment. (Only
when "Subwoofer" is set to "ON" in Speaker
Setup)
You can select front speaker type.
"Standard"/ "Wide"/ "Middle"/ "Narrow"
⁄
•
Speaker cannot be setup when in STANDBY source
mode.
72
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
[Screen Ratio]* Selects the screen display
mode. ( "16:9")
"16:9": Displays wide pictures.
DVD Setup
You can set up the DVD play.
"4:3 LB": Displays wide pictures in the Letter
Box format (having black stripes at the
top and bottom of screen).
"4:3 PS": Displays wide pictures in the Pan &
Scan format (showing pictures cut at
the right and left ends).
1
2
Display the DVD Setup screen
Touch [ ] > [
] > [DVD SETUP]. (page 59)
Set each item
[Parental Level]* Displays the Parental Lock
screen. ( "OFF")
(See <DVD Parental Level Setup>, page 74)
[Disc SETUP] Makes the settings related to the
disc media. (See <Disc Setup>, page 75)
⁄
•
* Disabled when a DVD is being played.
[Menu Language]* Selects a disc menu
language.
(See <DVD Language Setup>, page 74)
[Subtitle Language]* Selects a subtitle
language.
(See <DVD Language Setup>, page 74)
[Audio Language]* Selects an audio
language.
(See <DVD Language Setup>, page 74)
[Dynamic Range Control]* Sets the dynamic
range. ( "Dialog")
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen to
the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
The operation is available during the play stop
mode.
[Angle Mark] Sets an angle mark display.
(
"ON")
English
Download from Www.Somanuals.com. All Manuals Search And Download.
73
Setup Menu
DVD Language Setup
DVD Parental Level Setup
Sets a parental level.
Selects a language you use for the speech and
menus.
1
2
Display the DVD Setup screen
1
Display the DVD Setup screen
Touch [ ] > [
] > [DVD SETUP]. (page 59)
Touch [ ] > [
] > [DVD SETUP]. (page 59)
Display the Parental Level code number
screen
2
Select the language item to set
3
Enter a language code
See <DVD Language Codes> (page 87) and
select the desired language.
3
Enter the code number
1
1
1
Enters a language code.
[Cancel] Cancels the language setup and
1
Enters a code number.
returns to the "DVD SETUP" screen.
[Cancel] Cancels the current setup and returns
[Enter] Sets the language and returns to the
"DVD SETUP" screen. (It appears after you have
entered a language code.)
to the "DVD SETUP" screen.
[Level] Indicates the present parental lock
level.
[Original] Sets the DVD's original language
(only when setting an audio language).
[Enter] Determines the code number and
displays the Parental Level setup screen.
[Clear] Clears the language code.
[Clear] Clears the code number.
⁄
4
Set the language you use
•
The number you enter first is set as your code
number.
4
Display the Parental Level SETUP screen
74
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Select a parental level and complete the
setup
Disc Setup
Performs setup when using disc media.
1
2
Display the DVD Setup screen
Touch [ ] > [
] > [DVD SETUP]. (page 59)
Display the Disc Setup screen
Selects a parental level.
⁄
•
•
•
If a disc has higher parental lock level, you need to enter
the code number.
The parental lock level varies depending on a loaded
disc.
If a disc has no parental lock, anybody can play it back
even when you have set the parental lock.
3
Set each item
[Picture Display Time] Selects a picture
display time. ( "Long")
The Display of a JPEG picture is changed.
("Short", "Middle", "Long")
[CD Read] Sets a music CD playback. ( "1")
"1": Automatically recognizes and plays back
an Audio file disc, a DVD or a music CD.
"2": Forcibly plays back a disc as a music CD.
Select "2" if you wish to play a music CD
having a special format or if you cannot
play a disc in the "1" position.
[On Screen DVD] Sets an on-screen display of
the DVD Playback screen. ( "Manual")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
⁄
•
[CD Read]
Disabled when a disc is in the unit.
You cannot play an Audio file/VCD disc in the "2"
position. Also, you may not play some music CDs in the
"2" position.
English
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
USB Setup
iPod Setup
Performs setup when using USB.
Performs setup when using iPod.
1
2
Display the USB Setup screen
1
2
Display the iPod Setup screen
Touch [ ] > [
] > [USB SETUP]. (page 59)
Touch [ ] > [
] > [iPod SETUP]. (page 59)
Set each item
Set each item
[Picture Display Time] Selects a picture
display time. ( "Long")
[AudioBook Speed] Sets the Audio book
playback speed. ( "Normal")
The Display of a JPEG picture is changed.
("Short", "Middle", "Long")
[Wide Screen] Sets Wide Screen on or off.
(
"OFF")
[On Screen USB] Sets an on-screen display of
the USB Playback screen. ( "Auto")
"Auto": Information is displayed for 5 seconds
when updated.
[On Screen iPod] Sets an on-screen display of
the iPod Playback screen. ( "Auto")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
"Manual": Information is displayed when you
touch on the screen.
⁄
•
"Wide Screen" cannot be set while the iPod is connected.
76
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Setup (Type 2/ 3 models)
TV Setup
You can set Tuner related parameters.
The TV signal receiving areas can be set.
1
2
Display the TV SETUP screen
1
2
Display the Tuner Setup screen
Touch [ ] > [
] > [TV SETUP]. (page 59)
Touch [ ] > [
] > [TUNER SETUP]. (page
59)
Set each item
Set each item
[TV1 Area], [TV2 Area] Sets the TV receiving
area. (only when KTC-V300P (optional
accessory) connected)
[On Screen TV] Sets an on-screen display of
the TV screen. ( "Auto")
(only when the optional accessory TV tuner
connected)
"Auto": Information is displayed for 5 seconds
when updated.
[NEWS] Sets a news bulletin interrupt time.
(
"OFF")
[AF] When station reception is poor,
automatically switches to the station that
is broadcasting the same program over the
same RDS network. ( "ON")
"Manual": Information is displayed when you
touch on the screen.
3
Set up TV (only when KTC-V300P (optional
accessory) connected)
[Regional] Sets whether to switch to the
station only in the specific region using the
"AF" control. ( "ON")
Example : TV1 Area screen
[Auto TP Seek] When traffic information
station reception is poor, automatically
searches for a station that can be received
better. ( "ON")
[Language Select] Selects a display language
for the PTY function.
[Antenna Control] Allows you to turn off
the RDS fuction to prevent the motor-driven
antenna from extending. ( "ON")
Sets the present TV1 or TV2 receiving area.
English
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Controller
For DNX5360/ DNX5360M : This unit can be operated using the Remote Controller (RC-DV331) supplied
with this unit.
For DDX5036/ DDX5036M : This unit can be operated using the Remote Controller (RC-DV340) supplied
with this unit.
Remote Controller mode switch
¤CAUTION
•
Put the Remote Controller in a place where it will not
move during braking or other operations. A dangerous
situation could result, if the Remote Controller falls down
and gets wedged under the pedals while driving.
Do not leave the battery near fire or under direct sunlight.
A fire, explosion or excessive heat generation may result.
Do not recharge, short, break up or heat the battery or
place it in an open fire. Such actions may cause the battery
to leak fluid. If spilled fluid comes in contact with your eyes
or on clothing, immediately rinse with water and consult a
physician.
The functions operated from the remote
controller differ depending on the position of the
mode switch.
•
•
[RC-DV331]
[RC-DV340]
DISP
SRC
V.SEL
AUD
DVD
TV
MODE FNC/PBC
TOP MENU
AUDIO
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
U
U
U
U
SUBTITLE
ꢀꢁ
ꢅ
O
AUD
U
U
U
NAV
DVD
TV
ENTER
O
O
•
•
Place the battery out of reach of children. In the unlikely
event that a child swallows the battery, immediately
consult a physician.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
OPEN
FM+
VOL
AUD
DVD
TV
U
ꢂ
ꢃ
D
Y
O
U
U
2
ZONE
1
2ABC 3DEF
1
ꢄ
ꢀ
R.VOL
ꢁ
4GHI 5JKL 6MNO
7PQRS 8TUV 9WXYZ
CLEAR
DIRECT
ATT
0
Battery installation
AUD mode
Use two "AAA"/"R03"-size batteries.
Switch to this mode when controlling a selected
source or tuner source, etc.
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
DVD mode
Switch to this mode when playing DVDs or CDs etc.
with the player integrated in this unit.
TV mode
Switch to this mode when controlling TV.
NAV mode (RC-DV331 only)
Switch to this mode when controlling Navigation
unit.
⁄
•
The position of the remote control mode switch is
indicated in the title of each mode, e.g., "(AUD mode)".
When controlling a player that is not integrated in the
unit, select "AUD" mode.
⁄
•
•
If the Remote Controller operates only over shorter
distances or does not operate at all, it is possible that
the batteries are depleted. In such instances, replace the
both batteries with new ones.
78
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Cursor key
Moves the cursor when displaying menu.
Common operations (AUD mode)
[RC-DV331]
[RC-DV340]
ꢀꢁ
ꢅ
O
AUD•
DVD•
TV•
Source switching
EN
Switches to the source to be played.
O
AM−
FM
+
DISP
SRC
V.SEL
ME FNC/PBC
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
ENTER
AUDIO
SUBTITLE
Enters options.
ꢀꢁ
ꢅ
ꢀꢁ
ꢅ
O
Volume control
Adjusts the volume.
AUD
DVD
TV
•
•
•
ENTER
O
O
O
O
AM−
OPEN
FM
+
AM−
OPEN
FM
+
VOL
ꢂ
ꢃ
D
Y
O
Hands-free communication
When a call comes in, it answers the call.
2Z
1
2ABC 3DEF
O
AM−
OPEN
FM
+
Volume attenuator
Press the key once to lower the volume. Press again
to restore the previous volume.
VOL
ꢂ
ꢃ
D
Y
O
2ZONE
ꢀ
1
2ABC 3
1
ꢄ
R.VOL
7PQRS 8TUV 9WXYZ
ꢁ
Function
CLEAR
DIRECT
ATT
0
Switches the function screen.
DISP
SRC
V.SEL
MODE FNC/PBC
Dual Zone
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
AUDIO
SUB
Switches the Dual Zone function ON and OFF.
ꢀꢁ
ꢅ
−
OPEN
FM
+
VOL
ꢂ
ꢃ
D
Y
O
MODE
Switches the screen mode.
Screen mode changes each time you press this key.
2ZONE
1
2ABC 3DEF
1
ꢄ
ꢀ
4GHI 5JKL 6MNO
R.V
DISP
Rear volume control
SRC
V.SEL
MODE FNC/PBC
Adjusts volume at rear when the Dual Zone
TOP ENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
BTITLE
function is ON.
ꢀꢁ
ꢅ
2ZONE
1
2ABC 3DEF
1
ꢄ
ꢀ
R.VOL
ꢁ
4GHI 5JKL 6MNO
7PQRS 8TUV 9WXYZ
CLEAR
DIRECT
AT
0
NAV/V.SEL
Switches to the navigation screen.
DISP
SRC
V.SEL
MODE FNC/PBC
TOP MENU
MENU
DVD SETUP
ANGLE
RE
ZOOM
AUDIO
SUBTITLE
ꢀꢁ
ꢅ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
79
Remote Controller
VCD 1.X, VCD 2.X (PBC OFF)
DVD/VCD (DVD mode)
[RC-DV331]
Track number
Cancel
[RC-DV340]
Track search and file search
Selects the track or file to be played.
VCD 2.X (PBC ON)
O
O
Scene number
Number
AM−
OPEN
FM
+
VOL
ꢂ
D
Y
O
Cancel
2ZONE
1
2ADEF
ꢄ
Once you have switched to the direct search
feature, specify the search number from the
numeric keypad, and then press [ENTER] key.
Play/Pause
Pauses the track.
Press again to resume playing.
Numeric keypad
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
AUDIO
SUBTITLE
ꢃ
Y
2ZONE
1
2ABC 3DEF
ꢀꢁ
ꢅ
1
ꢄ
O
ꢀ
R.VOL
ꢁ
4GHI 5JKL 6MNO
AUD
•
•
•
DVD
TV
ENTER
7PQRS 8TUV 9WXYZ
CLEAR
DIRECT
ATT
0
Stop
Memorizes the last point where the disc stopped.
•
•
Specify the number to search in direct search.
When pressed again, the last point is deleted.
1
2ABC
to fast forward/backward.
Press
TOP MENU
AUDIO
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
SUBTITLE
Switches the fast forward/backward speed each
time you press this key.
ꢀꢁ
ꢅ
O
AUD
•
•
•
•
Press
4GHI
5JKL
to slow forward/backward.
DVD
TV
ENTER
Switches the slow playback speed each time you
press this key.
Direct search
R.VOL
7PQRS 8TUV 9WXYZ
ꢁ
DVD Top Menu
CLEAR
DIRECT
ATT
0
Returns to the DVD top menu.
DISP
SRC
MODE FNC/PBC
V.SEL
Pressing this key switches the features that can be
searched directly.
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
AU
UBTITLE
DVD-VIDEO
ꢀꢁ
ꢅ
Title number
Chapter number
Play time
DVD Menu
Displays the DVD menu.
Turns the playback control on or off while playing
VCD.
Item number*
Cancel
DISP
SRC
V.SEL
MODE FNC/PBC
* You may not be able to use this function with some discs
or scenes.
TOP MENU
MENU
DVD SETUP
NGLE
RETURN
ZOOM
AUDIO
SUB
ꢀꢁ
ꢅ
DVD-VR
Title number
Chapter number
Play time
Cancel
80
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Disc/Audio file/Video file/
Picture file (AUD mode)
SUBTITLE
Switches the subtitle language.
DISP
SRC
V.SEL
[RC-DV331]
[RC-DV340]
MODE FNC/PBC
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
Folder search
AUDIO
SUBTITLE
ꢀꢁ
Selects the folder to be played.
ZOOM
O
O
AM−
OPEN
Switches the zoom ratio each time you press this
FM
+
VOL
D
Y
key.
O
2ZONE
1
2ABC 3DEF
1
ꢄ
DISP
SRC
V.SEL
MODE FNC/PBC
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
Track search and file search
AUDIO
SUBTITLE
Selects the track or file to be played.
ꢀꢁ
ꢅ
O
O
AM−
OPEN
FM
+
Picture Angle
Switches the picture angle each time you press this
key.
VOL
ꢂ
ꢃ
D
Y
O
2ZONE
23DEF
ꢄ
DISP
SRC
V.SEL
Play/Pause
Pauses the track.
MODE FNC/PBC
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
AUDIO
SUBTITLE
Press again to resume playing.
ꢀꢁ
ꢅ
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
AUDIO
SUBTITLE
AUDIO
Switches Voice Language.
ꢀꢁ
ꢅ
O
AUD
•
•
•
Switches the voice language each time you press
this key.
DVD
TV
ENTER
Direct search
DISP
SRC
V.SEL
R.VOL
MODE FNC/PBC
7
PQRS 8TUV 9WXYZ
ꢁ
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
CLEAR
DIRECT
ATT
0
AUDIO
SUBTITLE
ꢀ
ꢅ
Pressing this key switches the features that can be
searched directly.
Music Disc
Track number
Play time
Cancel
Audio files in DVD/CD disc
Folder number
File number
Cancel
Once you have switched to the direct search
feature, specify the search number from the
numeric keypad, and then press [38] key.
Next page 3
English
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Controller
Numeric keypad
Example: 92.1MHz (FM)
ꢃ
Y
9WXYZ
2ABC
1
9WXYZ
2ABC
1
0
2ZONE
1
2ABC 3DEF
1
ꢄ
«
or
«
ꢀ
R.VOL
ꢁ
4GHI 5JKL 6MNO
7PQRS 8TUV 9WXYZ
or
CLEAR
DIRECT
ATT
0
Example: 810kHz (AM)
8TUV
1
0
8TUV
1
•
Specify the number to search in direct search.
«
«
or
or
Radio (AUD mode)
Numeric keypad
ꢃ
Y
[RC-DV331]
[RC-DV340]
2ZONE
1
2ABC 3DEF
1
ꢄ
ꢀ
R.VOL
ꢁ
4GHI 5JKL 6MNO
Band switching
Switches to bands received by the unit.
7PQRS 8TUV 9WXYZ
CLEAR
DIRECT
ATT
0
O
O
AM−
OPEN
FM
+
VOL
•
•
To use preset tuning, press the number of a
D
Y
O
1
programmed broadcast station. (
–
6MNO
)
2ZONE
1
2ABC 3DEF
1
ꢄ
Press the direct tuning key first, then specify the
frequency of the station to receive.
Station selection
Switches to broadcast stations received by the unit.
O
O
AM−
OPEN
FM
+
VOL
ꢂ
D
Y
O
2ZONE
1
2DEF
1
ꢄ
Seek mode switching
Switches the Seek mode (AUTO1, AUTO2, MANU).
TOP MENU
MENU
DVD SETUP
RETURN
AUDIO
SUBTITLE
ANGLE
ZOOM
ꢀꢁ
ꢅ
O
AUD
•
•
•
DVD
TV
ENTER
Direct tuning
After pressing this key, use the keypad to specify
the broadcast station you wish to receive.
R.VOL
7PQRS 8TUV 9WXYZ
ꢁ
CLEAR
DIRECT
ATT
0
82
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod (AUD mode)
NAV (NAVI mode) (RC-DV331 only)
[RC-DV331]
[RC-DV340]
Cursor key
Scrolls the map, or moves the cursor.
Music/Video search
Selects the music/video to be played.
O
O
AM−
OPEN
FM
+
VOL
ꢂ
D
Y
O
2ZONE
1
23DEF
ꢄ
ENTER
Play/Pause
Pauses the music/video.
Performs the selected function.
Press again to resume playing.
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
AUDIO
SUBTITLE
ꢀꢁ
ꢅ
O
AUD
•
•
•
DVD
TV
ZOOM
ENTER
Zooms in or out the navigation map.
USB (AUD mode)
[RC-DV331]
[RC-DV340]
Folder search
Selects the folder to be played.
MENU
Displays Main menu.
O
O
AM−
OPEN
FM
+
VOL
D
Y
O
2ZONE
1
2ABC 3DEF
1
ꢄ
CANCEL
Displays previous screen.
File search
Selects the file to be played.
O
O
AM−
OPEN
FM
+
VOL
ꢂ
D
Y
O
2ZONE
23DEF
ꢄ
POSITION
Displays the current position.
Play/Pause
Pauses the file.
Press again to resume playing.
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
AUDIO
SUBTITLE
ꢀꢁ
ꢅ
O
AUD
•
•
•
DVD
TV
ENTER
Next page 3
English
Download from Www.Somanuals.com. All Manuals Search And Download.
83
Remote Controller
ROUTE M
Displays Route Option menu.
TV (TV mode)
[RC-DV331]
[RC-DV340]
Switching Band/Video
It switches between the station of the TV band to
receive and video input.
O
O
VIEW
AM−
OPEN
FM
+
VOL
Switches between 2D and 3D map displays.
ꢂ
ꢃ
D
Y
O
2ZONE
1
2ABC 3DEF
1
ꢄ
Channel Selection
The TV channel to receive is selected.
O
O
VOICE
AM−
OPEN
FM
+
VOL
Plays Voice guidance.
ꢂ
D
Y
O
2ZONE
1
2DEF
ꢄ
Direct tuning
(NTSC TV type only)
R.VOL
MAP DIR
7PQRS 8TUV 9WXYZ
ꢁ
Switches between the heading up navigation and
CLEAR
DIRECT
ATT
0
north up navigation map displays.
Press this key first, and then specify the station to
receive with the numeric keypad.
Example: In case of Channel 6 (2-digit)
0
6MNO
Numeric keypad
ꢃ
Y
2ZONE
1
2ABC 3DEF
1
ꢄ
ꢀ
R.VOL
ꢁ
4GHI 5JKL 6MNO
7PQRS 8TUV 9WXYZ
CLEAR
DIRECT
ATT
0
•
•
The number of the memorized station is
1
selected. (
–
6MNO
)
Press the direct tuning key first, then specify the
channel of the station to receive.
84
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is
displayed.
Initial Setup
1
2
Turn the power On
Set each item
[Language] Select the language used for the
control screen and setting items. (page 61)
[iPod AV Interface Use] Sets the terminal to
which the iPod is connected to. ( "iPod")
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display.
(
"OFF")
"ON": Switches to the rear camera video
display when "Reverse" gear is engaged.
"OFF": The monitor does not switch to the
rear view camera video display even
when engaging the shift knob of car to
"Reverse".
[Color] Sets the screen and button illumination
color. (page 65)
3
End initial setup
⁄
•
The settings above can be changed in <Setup Menu>
(page 59).
English
Download from Www.Somanuals.com. All Manuals Search And Download.
85
Status bar Indicator items
Source Display Overview
Shown below is a list of indicators displayed on
the Status bar.
USB
"FO-REP" Indicates that the Folder repeat function is ON.
"MOVIE" Identifies the video file.
"MUSIC" Identifies the music file.
"PICTURE" Identifies the image file.
"RDM" Indicates that the Random function is ON.
"REP"
Identifies that the Repeat function is ON.
"PLST" Indicates that the Play list mode is selected now.
"SLIDE" Indicates that the slide show function is ON.
"MUSIC" Identifies the music file.
iPod
"VIDEO" Identifies the video file.
"RDM" Indicates that the Random function is ON.
"A-RDM" Indicates that the Album random function is ON.
Source Display Overview
General "ATT"
"DUAL" Turns on the Dual zone function.
"TEL" Indicates the connection state of the Bluetooth hands-free
unit. (Orange: Connected. White: Not connected.)
DVD/CD "FO-REP" Indicates that the Folder repeat function is ON.
Indicates that the attenuator is active.
"REP"
"AF"
Indicates that the Repeat function is ON.
Indicates that the AF search function is ON.
Tuner
"AUTO1" Indicates that Seek mode is set to Auto1.
"AUTO2" Indicates that Seek mode is set to Auto2.
"EON" Indicates that the RDS station is sending EON.
"LO.S" Indicates that the Local seek function is ON.
"MANU" Indicates that Seek mode is set to Manual.
"MONO" Indicates that the forced monaural function is ON.
"NEWS" Indicates that news bulletin interruption is in progress.
MEDIA
"IN"
Indicates that a disc is inserted. (White: A Disc is inside the
unit. Orange: Error at the disc player.)
"MOVIE" Identifies the video file.
"MUSIC" Identifies the music file.
"PICTURE" Identifies the image file.
"RDM" Indicates that the Random function is ON.
"RDS" Indicates the state of the RDS station when the AF function
is ON. (Orange: RDS is being received. White: RDS is not
being received.)
"REP"
Indicates that the Repeat function is ON.
"SLIDE" Indicates that the slide show function is ON.
"ST"
"TI"
Indicates that stereo broadcast is being received.
DVD-Video "C-REP" Indicates that the Chapter repeat function is ON.
"T-REP" Indicates that the Title repeat function is ON.
DVD-VR "1 M/S" Identifies the primary/secondary audio output of stream 1.
"1 MAIN" Identifies the primary audio output of stream 1.
"1 SUB" Identifies the secondary audio output of stream 1.
"PLST" Identifies the Play list mode.
Indicates the reception state of traffic information.
(Orange: TP is being received. White: TP is not being
received.)
TV
"AUTO1" Indicates that Seek mode is set to Auto1.
"AUTO2" Indicates that Seek mode is set to Auto2.
"MANU" Indicates that Seek mode is set to Manual.
"T-REP" Indicates that the Title repeat function is ON.
VCD
"1chLL" Identifies the left audio output of channel 1.
"1chLR" Identifies the monaural audio output of channel 1.
"1chRR" Identifies the right audio output of channel 1.
"1chST" Identifies the stereo audio output of channel 1.
"LL"
Identifies the left audio output.
"LR"
"RR"
"ST"
"PBC"
Identifies the monaural audio output.
Identifies the right audio output.
Identifies the stereo audio output.
Indicates that the PBC function is ON.
"SVCD" Identifies the Super Video CD.
"VER1" Indicates that the Video CD version is 1.
"VER2" Indicates that the Video CD version is 2.
"REP"
Indicates that the Repeat function is ON.
86
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Language Codes
Code
aa
ab
af
am
ar
as
ay
az
ba
be
bg
bh
bi
bn
bo
br
ca
co
cs
cy
da
de
dz
el
en
eo
es
et
Language
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Code
is
it
ja
jv
ka
kk
kl
km
kn
ko
ks
ku
ky
la
Language
Icelandic
Italian
Japanese
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Luxembourgish
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Code
si
sk
sl
sm
sn
so
sq
sr
ss
st
su
sv
sw
ta
Language
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
lb
ln
lo
lt
te
Telugu
Tajik
Thai
tg
th
ti
tk
tl
tn
to
tr
ts
tt
tw
uk
ur
uz
vi
vo
wo
xh
yo
zh
zu
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
lv
Welsh
Danish
German
Bhutani
Greek
mg
mi
mk
ml
mn
mo
mr
ms
mt
my
na
ne
nl
no
oc
om
or
pa
pl
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Twi
Ukrainian
Urdu
eu
fa
fi
fj
fo
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
fr
fy
Yoruba
Chinese
Zulu
ga
gd
gli
gn
gu
ha
he
hi
Polish
ps
pt
qu
rm
rn
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Hebrew
Hindi
ro
ru
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
hr
hu
hy
ia
ie
ik
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
rw
sa
sd
sg
sh
Serbo-Croatian
id
English
Download from Www.Somanuals.com. All Manuals Search And Download.
87
Help?
Troubleshooting
Some functions of this unit may be disabled by
some settings made on this unit.
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
!
• Cannot set up the subwoofer.
• Cannot set up subwoofer phase.
• No output from the subwoofer.
• Cannot set up the low pass filter.
• Cannot set up the high pass filter.
General
?
The Touch Sensor Tone doesn’t sound.
✔
The preout jack is being used.
Subwoofer is not set to On.
☞ <Speaker Setup> (page 72)
☞
The Touch Sensor Tone can’t be output from
the preout jack.
The Dual zone function is enabled.
☞ <Zone Control> (page 58)
Tuner source
Radio reception is poor.
The unit is set to STANDBY source.
?
!
!
• Cannot select the output destination of the
subsource in the Dual zone.
• Cannot adjust the volume of the rear
speakers.
The Dual zone function is disabled.
☞ <Zone Control> (page 58)
✔
The car antenna is not extended.
☞
Pull the antenna out all the way.
✔
The antenna control wire is not connected.
☞
Connect the wire correctly, referring to the
section on <INSTALLATION MANUAL>.
Disc source
The specified disc does not play, but another
one plays instead.
Cannot play audio files.
"CD Read" of <Disc Setup> (page 75) is set to
"2".
?
✔
The specified CD is quite dirty.
!
!
!
Cannot Folder select.
The Random play function is enabled.
☞
Clean the CD.
✔
The disc is severely scratched.
Try another disc instead.
☞
Cannot perform Repeat play.
The PBC function is enabled.
Audio file source
• Cannot set up the equalizer.
• Cannot set up the crossover network.
The Dual zone function is enabled.
☞ <Zone Control> (page 58)
?
The sound skips when an Audio file is being
played.
✔
The media is scratched or dirty.
☞
Clean the media, referring to the CD
cleaning of the section on <Handling discs>
(page 4).
The unit is set to STANDBY source.
✔
The recording condition is bad.
☞
Record the media again or use another
media.
88
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
Help?
Error
"No Media File" :
The connected USB device contains no playable audio
file.
When the unit fails to operate correctly, the cause
of the failure appears on the display.
Media was played that doesn’t have data recorded that
the unit can play.
"Protect" :
Protective circuit has been activated because a speaker
cord has shorted or it has come in contact with the car
chassis.
➡ Wire or insulate the speaker cord as appropriate
and then push the Reset button.
"USB Device Error!!" :
The connected USB device is rated a current capacity
higher than the allowable limit.
➡ Check the USB device.
Some trouble may have occurred to the connected
USB device.
➡ Change the source to any source other than USB.
Remove the USB device.
"Hot Error" :
When the internal temperature of this unit rises to 60°C
or more, the protection circuit is activated and you
may not be able to operate the unit. At such times this
message will appear.
➡ Use the unit again after reducing the
temperature inside the vehicle.
"Authorization Error" :
Connection to the iPod has failed.
➡ Remove the iPod and then reconnect it.
The unit does not support the iPod.
➡ Refer to <iPod/iPhone that can be connected to
this unit> (page 6).
"Mecha Error" :
The disc player is malfunctioning.
➡ Eject the disc and try inserting it again. Contact
the Kenwood dealer if this indicator continues
blinking or the disc cannot be ejected.
"Update your iPod" :
The iPod's software is an older version which the unit
can not support.
➡ Confirm that the software for the iPod is the
latest version. Refer to <iPod/iPhone that can be
connected to this unit> (page 6).
"Disc Error" :
Disc is quite dirty.
➡ Clean the disc, referring tot he section on
<Handling discs> (page 4).
Disc is upside down.
➡ Load the disc with the labeled side up.
An unplayable disc is inserted.
"You only can connect one iPod." :
More than one iPod are connected to this unit.
➡ Connect only one iPod to the USB terminal with
iPod tag.
"Region Code Error" :
The disc you wanted to play has a region code that
cannot be played with this unit.
"Navigation Error. Please turn on power again
later." (DNX series only) :
The communication error has occurred due to severely
cold temperature.
➡ Turn on power again after warming your car
interior.
"Parental Level Error" :
The disc you wanted to play has a higher level than the
parental level you set.
"No Device" (USB device):
The USB device is selected as a source although no USB
device is connected.
➡ Change the source to any source other than USB.
Connect an USB device, and change the source
to USB again.
"No Navigation" (DDX series only):
This unit does not support the connected navigation
unit.
➡ The latest information on the connectable
navigation unit can be obtained from http://
"Disconnected" (iPod, Bluetooth audio player):
No navigation unit is connected.
The iPod/Bluetooth audio player is selected as a source
although no iPod/Bluetooth audio player is connected.
➡ Change the source to any source other than
iPod/Bluetooth. Connect an iPod/Bluetooth
audio player, and change the source to iPod/
Bluetooth again.
➡ Connect a supported navigation unit.
English
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Monitor section
USB interface section
Picture Size
USB Standard
: 6.1 inches (diagonal) wide
: USB 2.0
: 136.2 mm (W) x 72 mm (H)
File System
Display System
: FAT 16/ 32
: Transparent TN LCD panel
Maximum Power Supply Current
Drive System
: 500 mA
: TFT active matrix system
D/A Converter
Number of Pixels
: 24 Bit
: 1,152,000 (800H x 480V x RGB)
Video Decoder
Effective Pixels
: MPEG1/ MPEG2/ DivX
: 99.99 %
Audio Decoder
Pixel Arrangement
: MP3/ WMA/ AAC/ WAV
: RGB striped arrangement
Back Lighting
: LED
FM tuner section
Frequency Range
200 kHz : 87.9 MHz – 107.9 MHz
(Type 4/ 6 models only)
50 kHz : 87.5 MHz – 108.0 MHz
DVD player section
D/A Converter
: 24 bit
Usable Sensitivity (S/N : 26 dB)
: 9.3 dBf (0.8 μV/ 75 Ω)
Audio Decoder
: Linear PCM/ Dolby Digital/ dts/ MP3/ WMA/
Quieting Sensitivity (S/N : 46 dB)
AAC/ WAV
: 15.2 dBf (1.6 μV/ 75 Ω)
Video Decoder
Frequency Response ( 3.0 dB)
: MPEG1/ MPEG2/ DivX
: 30 Hz – 15 kHz
Wow & Flutter
S/N Ratio (dB)
: Below Measurable Limit
: 70 dB (MONO)
Frequency Response
Selectivity ( 400 kHz)
Sampling frequency 96 kHz : 20 – 22,000 Hz
Sampling frequency 48 kHz : 20 – 22,000 Hz
Sampling frequency 44.1 kHz : 20 – 20,000 Hz
: ≥ 80 dB
Stereo Separation
: 40 dB (1 kHz)
Total Harmonic Distortion
: 0.010 % (1 kHz)
S/N Ratio (dB)
: 98 dB (DVD-Video 96 kHz)
AM tuner section (Type 4/ 6 models only)
Frequency Range
AM (10 kHz) : 530 kHz – 1700 kHz
AM (9 kHz) : 531 kHz – 1611 kHz
Dynamic Range
: 98 dB (DVD-Video 96 kHz)
Disc Format
: DVD-Video/ VIDEO-CD/ CD-DA
Usable Sensitivity
: 28 dBμ
Sampling Frequency
: 44.1/ 48/ 96 kHz
Quantifying Bit Number
: 16/ 20/ 24 bit
90
DNX5360/DNX5360M/DDX5036/DDX5036M
Download from Www.Somanuals.com. All Manuals Search And Download.
LW tuner section (Type 2/ 3 models only)
Navigation section (DNX series only)
Frequency Range (9 kHz)
Receiver
: 153 kHz – 279 kHz
: High-sensitivity GPS receiver
Usable Sensitivity
Reception Frequency
: 45 μV
: 1575.42 MHz (C/A code)
Acquisition Times
Cold : < 38 seconds
Factory Reset : < 45 seconds
(On average for a stationary receiver with a clear
view of the sky)
MW tuner section (Type 2/ 3 models only)
Frequency Range (9 kHz)
: 531 kHz – 1611 kHz
Accuracy
Position : < 10 meters typical
Velocity : 0.05 m/sec. RMS
Usable Sensitivity
: 25 μV
Position Method
: GPS
Video section
Antenna
: External GPS antenna
Color System of External Video Input
: NTSC/ PAL
External Video Input Level (mini jack)
: 1 Vp-p/ 75 Ω
General
External Audio Max Input Level (mini jack)
: 2 V/ 25 kΩ
Operating voltage
: 14.4 V (10.5 – 16 V allowable)
Video Output Level (RCA jacks)
: 1 Vp-p/ 75 Ω
Maximum Current Consumption
: 15 A
Audio Output Level (RCA jacks)
: 1.2 V/ 10 kΩ
Installation Dimensions (W × H × D)
: 182 × 112 × 160 mm
7-3/16 x 4-7/16 x 6-5/16 inch
Operational Temperature Range
: -10 °C – +60 °C
Audio section
Storage Temperature Range
: -20 °C – +85 °C
Maximum Power (Front & Rear)
: 50 W x 4
Weight
Full Bandwidth Power (Front & Rear)
DNX series : 1.9 kg (4.1 lbs)
: 22 W x 4 (at less than 1 % THD)
DDX series : 1.8 kg (4.0 lbs)
Preout Level (V)
: 2 V/ 10 kΩ
Preout Impedance
: ≤ 600 Ω
Speaker Impedance
: 4 – 8 Ω
Tone Action
Bass : 100 Hz 8 dB
Middle : 1 kHz 8 dB
Treble : 10 kHz 8 dB
Specifications subject to change without notice.
Although the effective pixels for the liquid crystal panel is
given as 99.99% or more, 0.01% of pixels may not light or
may light incorrectly.
English
91
Download from Www.Somanuals.com. All Manuals Search And Download.
The "AAC" logo is a trademark of Dolby Laboratories.
Font for this product is designed by Ricoh.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
iPhone is a trademark of Apple Inc.
iTunes is a trademark of Apple Inc.
“Made for iPod”means that an electronic accessory has been designed to connect specifically to iPod and has been certified
by the developer to meet Apple performance standards.
“Works with iPhone”means that an electronic accessory has been designed to connect specifically to iPhone and has been
certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol and DTS 2.0 Channel are
trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
ABOUT DIVX VIDEO:
DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To
generate the registration code, locate the DivX VOD section in <DivX Setup> (page 60). Go to vod.divx.com
with this code to complete the registration process and learn more about DivX VOD.
DivX® is a registered trademark of DivX, Inc., and is under license.
The marking of products using lasers (Except for some areas)
The label is attached to the chassis/case and says that the component
uses laser beams that have been classified as Class 1. It means that the
unit is utilizing laser beams that are of a weaker class. There is no danger
of hazardous radiation outside the unit.
CLASS 1
LASER PRODUCT
Download from Www.Somanuals.com. All Manuals Search And Download.
For Turkey
Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli ve Elektronik Eşyalarda Bazı Zararlı Maddelerin
Kullanımının Sınırlandırılmasına Dair Yönetmeliğe uygun olarak üretilmiştir.
This product complies with Directive, Number 26891 regarding "REGULATION ON THE RESTRICTION OF THE USE
OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT".
DNX5360M/ DDX5036M:
· Declaration of Conformity with regard to the EMC Directive 2004/108/EC
DNX5360M:
· Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
English
Türk
Kenwood, işbu belge ile DNX5360M numaralı bu ünitenin 1999/5/EC
Direktifi'nin özel gereksinimlerine ve ilgili diğer hükümlerine uygun olduğunu
beyan eder.
Hereby, Kenwood declares that this unit DNX5360M is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|