GPS NAVIGATION SYSTEM
DNX520VBT
INSTRUCTION MANUAL
© B64-4644-00/00 (EW)
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
57
57
58
58
59
60
61
61
62
63
64
65
66
66
68
68
Hands-Free Phoning
Before Use
Downloading the Phonebook
Receiving a Call
During a Call
Call Waiting
42
42
42
43
43
43
44
45
45
46
46
47
48
49
50
51
52
How to Display SETUP Menu Screen
DivX Setup
Software Information
User Interface
Language Setting
Touch Panel Adjustment
Clock Setup
Security Setup
Making a Call
Calling by Phonebook
Calling by Entering a Phone Number
Making a Call Using Call Records
Calling by Voice Recognition
Controlling Tone-based Services
Setting Up the Hands-Free Phone
Voice Registration
Key Word Voice Registration
Phone Number Preset
SMS (Short Message Service)
Setup Memory
Entering Background
Panel Color Coordinate
Screen Adjustment
Registering Bluetooth Unit
Registering Bluetooth Unit PIN Code
Bluetooth Unit Connection
Bluetooth Hands-Free/Audio Output Setup 69
AV Input Setup
AV Interface Setup
Navigation Setup
Speaker Setup
DVD Setup
DVD Language Setup
DVD Parental Level Setup
Disc Setup
USB Setup
iPod Setup
Tuner Setup
TV Setup
69
70
70
71
72
73
73
74
75
75
76
76
Audio Control
Audio Control Menu
Audio Control
Equalizer Control
Tone Setup
54
54
54
55
55
56
Zone Control
Initial Setup
77
78
79
80
81
82
Status bar Indicator items
DVD Language Codes
Help? Troubleshooting
Help? Error
Specifications
English
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
Handling discs
2WARNING
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with
tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
To prevent injury or fire, take the following
precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
• Do not watch or fix your eyes on the unit’s display
when you are driving for any extended period.
• When removing discs from this unit, pull them out
horizontally.
• If the disc center hole or outside rim has burrs,
use the disc only after removing the burrs with a
ballpoint pen etc.
How to reset your unit
• If the unit or the connected unit fails to operate
properly, press the Reset button. The unit returns to
factory settings when the Reset button is pressed.
• Remove the USB device before pressing the Reset
button. Pressing the Reset button with the USB
device installed can damage the data contained in
the USB device. For how to remove the USB device,
see <How to Set a Medium / a Device> (page 13).
Discs that cannot be used
• Discs that are not round cannot be used.
• When the unit is turned on after pressing the Reset
button, the Initial SETUP screen is displayed. (page
77)
• Discs with coloring on the recording surface or
discs that are dirty cannot be used.
• This unit can only play the CDs with
.
This unit may not correctly play discs which do not
have the mark.
• You cannot play a disc that has not been finalized.
(For the finalization process refer to your writing
software, and your recorder instruction manual.)
• If you try to load a 3-inch-disc with its adapter into
the unit, the adapter might separate from the disc
and damage the unit.
Reset button
Cleaning the unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe it again with a clean soft dry cloth.
Other notes
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check
with your Kenwood dealer to make sure that they
work with your model and in your area.
• Characters that conform to ISO 8859-1 can be
displayed.
• The RDS or RBDS feature won’t work where the
service is not supported by any broadcasting
station.
¤
•
Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
Lens fogging
Protecting the monitor
To protect the monitor from damage, do not operate
the monitor using a ball point pen or similar tool with
the sharp tip.
When you turn on the car heater in cold weather, dew
or condensation may form on the lens in the disc player
of the unit. Called lens fogging, this condensation on
the lens may not allow discs to play. In such a situation,
remove the disc and wait for the condensation to
evaporate. If the unit still does not operate normally
after a while, consult your Kenwood dealer.
4
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
About Audio files
List of playable discs
•
Playable Audio file
Disc
types
DVD
Standard
Support
Remark
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), Linear
PCM (WAV) (.wav)
‡
×
DVD Video
DVD Audio
DVD-VR
⁄
‡
Not compatible with CPRM.
•
If music of normal CD and other playback systems are
‡
DVD-R
MP3/WMA/AAC/WAV/
JPEG/MPEG/DivX Playback
Multi-border/Multisession/
(Playback depends on
authoring conditions)
Compatible with 8-cm (3
inch) discs
recorded in the same disc, only the playback system
recorded at the first setout is played.
Acceptable media
‡
‡
‡
DVD-RW
DVD+R
•
CD-R/RW/ROM, DVD R/RW, mass-storage-class
USB device, iPod with KCA-iP240V
DVD+RW
•
•
Playable disc file format
ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
Playable USB device file system
FAT16, FAT32
‡
‡
×
‡
DVD-R DL (Dual layer)
DVD+R DL (Double layer)
DVD-RAM
Only video format
CD
Music CD
CD-TEXT/8-cm (3 inch)
discs supported.
MP3/WMA/AAC/WAV/
JPEG/DivX playback.
Multisession supported
Packet write not supported.
Although the audio files are complied with the standards
listed above, the play maybe impossible depending on
the types or conditions of media or device.
‡
‡
‡
‡
‡
×
CD-ROM
CD-R
•
Playing order of the Audio file
In the example of folder/file tree shown below, the
files are played in the order from ① to ⑩.
CD-RW
DTS-CD
Video CD (VCD)
Super video CD
Photo CD
<
v
:
:
FFollder
Audiofile
CD
(ꢂ)
vꢀ
ꢁ
×
%
CD-EXTRA
Only music CD session can
be played.
Sound quality of normal
CD music
ꢃ
vꢆ
vꢇ
%
HDCD
ꢅ
vꢄ
ꢈ
CCCD
×
×
%
Others
Dualdisc
vꢉ
v.
Super audio CD
Only CD layer can be
played.
‡ : Playback is possible.
An online manual about audio files is put on the
online manual, detailed information and notes
which are not written in this manual are provided.
Make sure to read through the online manual as
well.
% : Playback is partly possible.
× : Playback is impossible.
⁄
•
When buying DRM enabled contents, check the
Registration Code in the <DivX Setup> (page 58).
Registration Code changes each time a file with the
displayed Registration Code is played to protect against
copying.
About Video files
•
•
•
Acceptable video files
MPEG1, MPEG2, DivX
Extensions
mpg, mpeg, m1v, m2v, divx, div, avi
Acceptable media
Use of "DualDisc"
When playing a "DualDisc" on this unit, the surface
of the disc that is not played may be scratched
while the disc is inserted or ejected. Since the music
CD surface does not conform to the CD standard,
playback may be impossible.
CD-R/RW/ROM, DVD R/RW, mass-storage-class
USB device, iPod with KCA-iP240V
Acceptable discs, disc formats, USB device file system,
file and folder names and playing order are the same
as those for audio files. See <About Audio files>.
(A "DualDisc" is a disc with one surface containing
DVD standard signals and the other surface
containing music CD signals.)
Next page 3
English
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
About Picture files
About USB device
• In this manual, the word "USB device" is used for
flash memories and digital audio players which
have USB terminals.
• When the USB device is connected to this unit,
it can be charged up provided that this unit is
powered.
• Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
•
•
•
Acceptable picture files
JPEG
Extensions
jpg, jpeg
Acceptable media
CD-R/RW/ROM, DVD R/RW, mass-storage-class
USB device
Acceptable discs, disc formats, USB device file system,
file and folder names and playing order are the same
as those for audio files. See <About Audio files>.
• You cannot connect a USB device via a USB hub
and Multi Card Reader.
• Take backups of the audio files used with this unit.
The files can be erased depending on the operating
conditions of the USB device.
We shall have no compensation for any damage
arising out of erasure of the stored data.
iPod/iPhone that can be connected to this
unit
Made for
• iPod nano (1st generation)
• iPod nano (3rd generation)
• iPod nano (5th generation)
• iPod with video
• iPod touch (1st generation) • iPod touch (2nd generation)
Works with
• iPod nano (2nd generation)
• iPod nano (4th generation)
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
• When connecting the USB device, usage of the
CA-U1EX (option) is recommended.
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than 5 m can result in abnormal playback.
• iPod classic
TV tuner that can be connected to this unit
• KTC-D500E
• KTC-V300E
• KTC-V301E
• Update iPod/iPhone software to the latest version.
• You can control an iPod/iPhone from this unit by
connecting an iPod/iPhone (commercial product)
with Dock connector using an optional accessory
iPod connection cable (KCA-iP240V). The word
"iPod" appearing in this manual indicates the iPod/
iPhone connected with the KCA-iP240V (optional
accessory).
• By connecting your iPod/iPhone to this unit with
an optional accessory iPod connection cable (KCA-
iP240V), you can supply power to your iPod/iPhone
as well as charge it while playing music. However,
the power of this unit must be on.
⁄
• If you start playback after connecting the iPod, the
music that has been played by the iPod is played
first.
In this case, "RESUMING" is displayed without
displaying a folder name, etc. Changing the browse
item will display a correct title, etc.
• When the iPod is connected to this unit,
"KENWOOD" or "✓" is displayed on the iPod to
indicate that you cannot operate the iPod.
6
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Region codes in the world
The DVD players are given a region code according to the country or area it is marketed, as shown in the
following map.
1
5
2
1
2
1
4
5
2
4
DVD disc marks
Operation regulatory marks
With this DVD, some functions of this unit such as the
play function may be restricted depending on the
location where the DVD is playing. In this case, the
following marks will appear on the screen. For more
information, refer to the disc manual.
Symbol
Description
Indicates a region number. The discs with this mark can
be played with any DVD player.
ALL
Indicates the number of audio languages recorded. Up
to 8 languages can be recorded in a movie. You can
select a favorite language.
Prohibition Mark
8
Indicates the number of subtitled languages recorded.
Up to 32 languages can be recorded.
32
If a DVD disc has scenes shot from multiple angles, you
can select a favorite angle.
Discs with limited period of use
Do not leave discs with a limited period of use in this
unit. If you load an already expired disc, you may not
be able to remove it from this unit.
9
Indicates the type of screen for the image. The left mark
indicates that a wide image picture (16:9) is displayed
on a standard TV set screen (4:3) with a black band at
both the top and bottom of the screen (letter box).
16:9 LB
English
7
Download from Www.Somanuals.com. All Manuals Search And Download.
How to read this manual
This manual uses illustrations to explain its
operations.
Source Control Screen
The displays and panels shown in this manual
are examples used to provide clear explanations
of the operations.
For this reason, they may be different from the
actual displays or panels used, or some display
patterns may be different.
Switches to the source control screen to use
various functions.
1
Display the Source Control Screen
See <How to Display the Source Control
Screen>.
2
Operation on the Source Control screen
1
Selecting a screen item
Select and choose an item on the screen
Select the item by touching the button on the
screen
[FM] Switches to the FM1/2/3 band.
[AM] Switches to the AM band.
[4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
Multi Function
Short Press
Pre
[Mono]
Selects the Monaural
FM
reception.
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display
Setting
"AUTO1" Tunes in a station with good reception
automatically.
Change in the screen
With each operation, the screen changes in
th
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
3
Store in memory
2 sec.
∞ : Continues to the next line.
¶ : Ends here.
Continue to touch until the memory number
appears.
Next page 3
Continue to the next page
The instruction continues to the next page.
Make sure to flip the page for the rest of the
instruction.
The above operation example with the mark
differs from the actual operation.
8
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Icon
Icons representing available functions are
shown below.
:Function of DVD-VIDEO playback.
:Function of DVD-VR playback.
:Function of Video CD playback.
:Function of CD (CD-DA) playback.
:Function of Audio File playback.
:Function of MPEG file playback.
:Function of DivX file playback.
:Function of JPEG file playback.
:Function of Disc (DVD, CD) media.
:Function of USB device.
:Function of FM reception.
FM
Other marks
Press 2 seconds or more
Press the button, denoted by
seconds or more
Important precautions are described to
prevent injuries etc.
2sec. , for 2
Indicates to press and hold down the button
until operation starts or the screen changes.
The left example indicates to press the button
for 2 seconds.
Special instructions, supplementary
explanations, limitations, and reference pages
are described.
General precautions and reference pages are
shown on the item.
The initial value of each setup is shown.
English
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions of the buttons on the front panel
Security indicator (page 62)
Disc slot (page 13)
Remote control sensor
A
B
C
D
E
NAV
SRC
DVD
TUNER
TV
TEL
AV OUT
USB
FNC
V.OFF
Reset button
(page 4)
F
AUD
VOL
iPod
/AV-IN
ATT
NAV MAP
G
1 sec. : Press for more than 1 second
Ejects the disc.
Displays the navigation screen.
A
B
When the navigation screen has already been displayed, it switches
to the currently selected source screen.
Turns the power On.
C
Displays the Source Select screen. @
1 sec. Turns the power Off.
Hands Free control screen On/Off.
1 sec. Switches the source that is output at the AV OUTPUT
D
E
terminal.
7 While watching the playback screen of a visual source
Displays the Easy Control screen. &
7 While watching the navigation screen
Displays the Screen Control screen. q
7 While watching the screen other than the above
⁄
*1 The function of the [FNC] button
can be changed to the display off
function. See <User Interface> (page
59).
Screen Switching function On/Off. !
1 sec. Turns the display Off.*1
10
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions of the buttons on the front panel
Volume adjustment. (Turn the knob either way.)
Attenuation of the volume On/Off. (Press the knob.)
1 sec. Displays Tone Control screen.*2 T
F
⁄
*2 The display may not switch to Tone
Control screen in some conditions.
*3 [TV] button can be switched to
[VIDEO1], and [USB] button to [iPod].
For how to assign the source to the
button, refer to <User Interface>
(page 59).
Switches to the selected source.*3
G
Screen Switching Function
Switching between the navigation screen and the source control screen with one touch operation.
Connecting an external device to AV-IN jack
Use of the optional cable CA-C3AV is recommended for connecting an external player. When
connecting, make sure to attach the ferritic core supplied with this unit to prevent electromagnetic
noise. If the ferritic core may scratch the vehicle, wrap it with the cushion sheet (Accessory of this
unit).
Approx. 10 cm (3-15/16 inch)
iPod
Ferritic core
/AV-IN
Lock
(Accessory of this unit)
Banding band
(Accessory of this unit)
English
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
How to select the source by one-touch
operation
How to Display the Navigation Screen
DVD
TUNER
TV
NAV
USB
The navigation screen appears.
⁄
•
[TV] button can be switched to [VIDEO1], and [USB]
button to [iPod]. For how to assign the source to the
button, refer to <User Interface> (page 59).
•
For how to set up and use the navigation function,
see the Navigation Instruction Manual.
For how to operate each source, see the
following pages.
DVD-VIDEO/ DVD-VR/
How to Select the Source
Video CD disc
\ Page 18
\ Page 23
Sources can be selected from the Source Select
screen.
CD
Audio file/ Video file/
Picture file disc
Source Select screen
\ Page 23
\ Page 29
\ Page 23
\ Page 32
\ Page 36
iPod
USB
TUNER
TV
⁄
•
For Disc media, iPod, and USB, the input is switched to
the source as the media or the device is set.
How to display the Source Select screen
SRC
The Source Select screen appears.
Touch the icon of the source.
Use
or
to turn the page.
12
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
7 USB device
How to Set a Medium / a Device
7 Disc media
CA-U1EX
(Optional accessory)
If a disc is already inserted, it is ejected by
pressing the [0] button.
CA-U1EX (optional accessory) is required to
connect a USB device.
To disconnect the USB device, touch the [0]
button on the source control screen, and
then disconnect the USB device. See <Source
Control Screen> (page 23).
7 iPod
⁄
•
The playback starts automatically after setting the media
or the device.
7 microSD card
This microSD card slot is used to upgrade the
Navigation System.
For how to upgrade the Navigation System,
refer to the instruction manual of the
navigation system.
Ferritic core
(Accessory of this unit)
KCA-iP240V
(Optional accessory)
KCA-iP240V (optional accessory) is required
to connect an iPod. When connecting, make
sure to attach the ferritic core supplied with
this unit to prevent electromagnetic noise
(page 11).
To disconnect the iPod, stop the playback
by touching the [38] button on the source
control screen, and then disconnect the iPod.
See <Source Control Screen> (page 30).
Inserting the microSD card
Hold the microSD card with the label side
facing left and the notched section up, and
insert it into the slot until it clicks.
Removing the microSD card
Push the microSD card until it clicks and
then remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
English
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
How to Display the Source Control Screen
DVD
TUNER
TV
On the Source Control screen you can find all the
control buttons for the selected source.
Source Control screen
USB
The Source Control screen appears.
7 While watching the playback screen of a
visual source
•
For how to use each button, see the operation pages
of each source.
How to display the Source Control screen
7 While watching the navigation screen
FNC
V.OFF
The Source Control screen appears.
⁄
•
The screen will return to the navigation screen by
touching the same part of the Source Control screen.
The Source Control screen appears.
14
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Buttons on the Top Menu screen
[NAV Switches to the navigation screen.
[SRC] Switches to the source control screen of
the selected source. The icon of this button
changes according to the selected source.
How to Display Top Menu Screen
]
Top Menu screen is the entrance to all the
functions. You can enter source operation screen
as well as various setup menu from this screen.
Top Menu screen
[TEL
]
Switches to the Hands Free Main
screen. (page 44)
[NAV SETUP] Displays Navigation SETUP screen.
Refer to the navigation instruction manual for
setting up the navigation system.
[SRC SETUP] Displays SETUP Menu screen. (page
57)
[TEL SETUP] Displays Hands Free SETUP screen.
(page 48)
[
[
[
SRC SELECT] Displays Source Select
screen. (page 12)
Displays Audio Control Menu screen. (page
54)
How to display the Top Menu screen
]
]
Changes the screen skin each time it is
pressed.
The buttons listed below are common for
many screens.
[MENU] Displays Top Menu screen.
[
]
Opens the function bar. The buttons shown
below appear.
[
[
[
[
]
Displays the currently selected source
Displays Audio Control Menu screen.
screen.
Touch the [MENU] button on any screen.
]
(page 54)
]
Displays SETUP Menu screen. (page
The Top Menu screen appears.
57)
]
Closes the function bar.
English
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Basic Operation
Operation on the Playback Screen of
Visual Sources
How to display the playback screen
DVD
TUNER
TV
While watching visual sources, basic operation is
possible by touching the screen.
The screen has 4 function areas. The function of
each area is different depending on the sources.
(Some areas are unavailable for some sources.)
USB
Playback screen of a visual source
2
1
3
4
Basic operation of each area
The Playback screen of a visual source appears.
1
Reverse search.
2
Displays Menu control screen (DVD-VIDEO,
DVD-VR source), Picture control buttons
(sources with picture files), or Zoom control
buttons (Video CD).
⁄
•
The playback screen may appear directly after selecting
the source.
Switches TV band.
3
4
Forward search.
Displays/ Clears Source Information screen.*
•
For the function of each touching area, see the pages
of each source.
* Source Information screen
2
1
3
4
⁄
•
The information display is cleared automatically after
approximately 5 seconds.
16
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
How to Display the Easy Control Screen
Basic operation buttons of the selected source
can be displayed on the playback screen of
visual sources so that you can control the source
without switching the screen.
Easy Control screen
Buttons on the Easy Control screen
[∞] Changes the function as follows by touching
the [∞] button.
[SCRN] Displays Screen Control screen (page
41).
[TEL] Switches to the Hands Free Main
screen (page 44).
[1], [¡], [4], [¢], [7], [£8]
Buttons for source control. The buttons are
different depending on the source. See the
operation pages of each source.
While watching the visual source
FNC
V.OFF
The Easy control screen appears.
⁄
•
Easy Control screen is hidden when you touch the central
part of the monitor.
English
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching DVD/Video CD
You can play DVD/Video CD using various functions.
Playback Screen
Easy Control Screen
Basic functions are available even when the
playback screen is displayed.
Displays the basic operation buttons on the
screen.
1
2
Display the Playback Screen
1
2
Display the Easy Control Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
See <How to Display the Easy Control buttons>
(page 17).
Operation on the Playback Screen
Operation on the Easy Control Screen
2
1
2
1
3
4
3
1, 3
Searches for a chapter.
Searches for a chapter.
1, 2 Switches to the Playback screen.
DVD-VIDEO
DVD-VR
3
Displays the Source Control screen.
Selects a scene (when PBC is
On) or a track (when PBC is Off).
Video CD
[1], [¡] Fast Forwards or Fast Backwards.
Changes the speed (2 times, 3 times, or off) each
time the button is touched.
2
Displays the Menu Control 1 screen
(page 20).
Displays the Menu Control screen
(page 21).
Displays the Zoom Control screen
(page 22).
DVD-VIDEO
DVD-VR
[4], [¢]
Searches for a chapter.
DVD-VIDEO
Searches for a chapter.
DVD-VR
Video CD
Selects a scene (when PBC is On) or a
track (when PBC is Off).
Video CD
4
Displays/ Clears Source Information screen.
[7] Stops playing.
When touched twice, the disc is played from
its beginning when you play it the next time.
⁄
•
The information display is cleared automatically after
approximately 5 seconds.
[38] Plays or pauses.
18
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
"3" Play Mode Display
Source Control Screen
"T"/ "C"/ "R"/ "P" Play Time Display
Use the [TIME] to change play time
display.
Switches to the source control screen to use
various playback functions.
1
2
Display the Source Control Screen
[
]
When
appears, the text display is
scrolled by touching it.
See <How to Display the Source Control
Screen> (page 14).
Multi Function
Operation on the Source Control Screen
DVD-VIDEO/DVD-VR
1
[
[
]
Closes the multi function bar.
Opens the multi function bar.
]
DVD-VIDEO
[REP] Switches the Repeat Play operations in
the following sequence.
Title Repeat, Chapter Repeat, Repeat Off
Video CD
[TIME] Switches the play time display in the
following sequence.
1
Chapter ("C"), Title ("T"), remaining titles ("R")
DVD-VR
[REP] Switches the Repeat Play operations in
the following sequence.
Title Repeat, Repeat Off
[TIME] Switches the play time display in the
following sequence.
Title ("T"), remaining titles ("R")
[38] Plays or pauses.
[7] Stops playing.
When touched twice, the disc is played from
its beginning when you play it the next time.
[PLST] Switches between the original mode
and Play list mode.
[0] Ejects a disc.
Video CD
[1], [¡] Fast Forwards or Fast Backwards.
Changes the speed (2 times, 3 times, or off) each
time the button is touched.
[REP] Switches the Repeat Play operations in
the following sequence.
Track Repeat, Repeat Off (Available when the
PBC is off)
[4], [¢]
Searches for a chapter.
DVD-VIDEO
[TIME] Switches the play time display in the
following sequence.
Track ("P"), remaining discs ("R") (Effective only
when the PBC function is off)
Searches for a chapter.
DVD-VR
Selects a scene (when PBC is On) or a
track (when PBC is Off).
Video CD
[
], [
]
Slow Forwards or
DVD-VR
DVD-VIDEO
,
[PBC] Turns the PBC On or Off. (only when VCD
Ver 2.0 is in use)
Backwards.
[
1
]
Switches to the playback screen.
Information display
Title display.
"Title" Title Number Display
"Chap" Chapter Number Display
"Scene"/ "Track" Scene/Track Number
Display
English
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching DVD/Video CD
DVD-VIDEO Disc Menu
Selects an option from the DVD-VIDEO Disc
Menu.
1
2
Display the Playback Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
⁄
Display the Menu Control 1 screen
•
Touching the central part of the monitor also turns on
the Highlight Control.
•
•
To cancel Highlight Control, press the [FNC] button.
The Highlight Control is cleared automatically after
approximately 10 seconds.
5
Operation on the Menu Control 2 screen
3
Operation on the Menu Control 1 screen
[Menu] Calls the Menu.
[Previous] Displays the Menu Control 1 screen.
[Angle] Switches the picture angle.
[SUB] Switches the subtitle language.
[Audio] Switches the voice language.
[Zoom] Displays the Zoom Control screen.
[Exit] Exits the Menu Control 2 screen.
[Next] Displays the Menu Control 2 screen.
[2], [3], [5], [∞] Selects a menu option.
[Enter] Enters your menu selection.
[Return] Returns to the previous menu screen.
[Top] Displays the Top Menu.
[Highlight] Highlight Control.
[Exit] Exits the Menu Control 1 screen.
6
Operation on the Zoom Control screen
4
Operation on the Highlight Control
Highlight control lets you control DVD Menu
by touching the menu button directly on the
screen.
20
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
[Zoom] Changes the zoom ratio at 4 levels (2
times, 3 times, 4 times, or off) each time you
touch.
DVD-VR Menu Control
Selects an option from the DVD-VR Disc Menu.
1
Display the playback screen
[2], [3], [5], [∞] Scrolls the screen in the
direction you touch.
See <Operation on the Playback Screen of Visual
Sources> (page 16).
[Return] Returns to the Menu Control 2 screen.
[Exit] Exits the Zoom Control screen.
2
Display the Menu Control screen
3
Operation on the Menu Control screen
[Zoom] Displays the Zoom Control screen.
[SUB] Switches the subtitle language.
[Audio] Switches the voice language.
[Exit] Exits the Menu Control screen.
4
Operation on the Zoom Control screen
[Zoom] Changes the zoom ratio at 4 levels (2
times, 3 times, 4 times, or off) each time you
touch.
[2], [3], [5], [∞] Scrolls the screen in the
direction you touch.
[Return] Returns to the Menu Control screen.
[Exit] Exits the Zoom Control screen.
English
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching DVD/Video CD
Video CD Zoom Control
Displays an enlarged VCD screen.
1
Display the playback screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
2
Display the Zoom Control screen
3
Operation on the Zoom Control screen
[Zoom] Changes the zoom ratio at 2 levels (2
times or off) each time you touch.
[2], [3], [5], [∞] Scrolls the screen in the
direction you touch.
[Exit] Exits the Zoom Control screen.
22
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Disc/ Audio File Listening &
Video File/ Picture File Watching
You can recall various control screens during playback of CD, audio file, video file and picture file.
•
•
See <List of playable discs> (page 5) for playable discs.
See <About Audio file> (page 5), <About Video files> (page 5) or <About Picture files> (page 6) for playable files.
[List]
Displays the folder list or play list. (page 24)
Switches to the playback screen.
Information display
Selects the Disc Text or Track Text.
,
,
Source Control Screen
Audio File MPEG/DivX®
JPEG
Switches to the source control screen to use
various playback functions.
[
1
]
1
2
Display the Source Control Screen
CD
See <How to Display the Source Control
Screen> (page 14).
,
,
Audio File MPEG/DivX®
JPEG
Selects Folder Name, File Name, Title,
Artist Name, or Album Name.
Operation on the Source Control Screen
"Track" Track Number Display
CD
"
"
"
Folder Number Display
File Number Display
1
"
"#### / ####" Total number of file in the
folder and the file number display
"3" Play Mode Display
"P"/ "R" Play Time Display
Use the [TIME] to change play time display.
[
]
When
appears, the text display is
Audio File
MPEG/DivX®
JPEG
scrolled by touching it.
1
Multi Function
[1/2] Switches the multi function display.
[38] Plays or pauses.
[7] Stops playing.
[
[
]
Closes the multi function bar.
Opens the multi function bar.
Disc
]
When touched twice, the disc is played from
its beginning when you play it the next time.
CD
[0]
Ejects the disc.
Disc
[REP] Repeats the present track.
USB Disables the USB device.
When "No Device" is shown, the USB
device can be removed safely.
If you wish to play it again while the
USB device is connected, touch it
again.
[RDM] Starts or stops Random Play (to play
music in random order).
[TIME] Switches the play time display between
Track ("P"), and Disc Remaining Time ("R").
[1], [¡]
,
,
CD
Audio File MPEG/DivX®
Fast Forwards or Fast Backwards.
[4], [¢] Selects a track/ file.
[
], [
]
,
,
Audio File MPEG/DivX®
JPEG
Selects a folder.
Next page 3
English
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Disc/ Audio File Listening & Video File/ Picture File Watching
List Select
Audio File
MPEG/DivX®
JPEG
[REP] Repeats the present file or data.
[FREP] Repeats the music or data of the
present folder.
Folder list: Searches folders and Audio/ Video/
Picture files stored in media and devices
according to hierarchy.
[RDM] Starts or stops Random Play (to play
files of the present folder in random order).
Not available if there are only picture files.
Play list: Lists and searches music contained in the
USB device.
1
Display the Source Control Screen
[4Line]/ [2Line] Switches the number of lines
displayed in the Information Display.
See <Source Control Screen> (page 23).
[FOLD]/ [FLIST] Displays the folder list.
2
Start List Select
[PLIST]
in
USB
Audio File
Displays the play list.
[SLIDE]
Disc
,
Audio File
JPEG
Displays images in the folder currently being
played one after another.
If there is no image in the folder currently
being played, initial background is displayed.
For information on setting the image display
time, see <Disc Setup> (page 74) or <USB
Setup> (page 75).
USB
[INFO]
Displays music information
Audio File
⁄
•
(such as Tag and content property) of Audio
file being played.
Touching [List] displays the previously used Folder
list or Play list.
,
Displays information of file
MPEG/DivX®
JPEG
being played.
[LINK]
3
Select a file
in
Searches for another
USB
Audio File
Folder list
Disc/USB
song of the currently selected artist. See <Link
Search> (page 26).
[Device]
Selects the connected USB
USB
1
device (or a partition). See <USB Device
Select> (page 25).
1
Folder opens when touched, and the files in
the folder are played.
When appears, the text display is
[
]
scrolled by touching it.
[
[
[
[
ROOT] Moves to the top hierarchy level.
UP] Moves up a hierarchy level.
TOP]
Moves to the top folder.
USB
CUR] Displays the currently playing folder.
[CTRL] Returns to the Source Control screen.
24
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Play list
in
USB device select
Audio File
USB
Selects the connected USB device (or a partition).
1
2
Display the Source Control Screen
1
See <Source Control Screen> (page 23).
Display the USB Device Select Screen
1
Switches to the lower level of the category.
When appears, the text display is
[
]
scrolled by touching it.
3
Select a USB device
[
[
ALL] Lists all the music in the selected
category.
UP] Moves to the upper level of the
category.
1
[
[
TOP] Moves to the top category.
CUR] Displays the currently playing
category.
[CTRL] Returns to the Source Control screen.
1
[
Selects a device or partition.
UP] Returns to the Device Selection screen.
Scrolls to the position of the specified initial
[
]
When
appears, the text display is
scrolled by touching it.
[CTRL] Returns to the Source Control screen.
Scrolls to the selected initial.
English
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Disc/ Audio File Listening & Video File/ Picture File Watching
Link search (Audio file in USB)
Playback Screen (Video file, Picture file)
Searches for another song of the currently
selected artist.
Basic functions are available even when the
playback screen is displayed.
1
Display the Source Control Screen
1
2
Display the Playback Screen
See <Source Control Screen> (page 23).
See <Operation on the Playback Screen of Visual
Sources> (page 16).
2
Start Link search
Operation on the Playback Screen
2
1
3
3
Select a song
4
1
1, 3 Searches for a file.
2
Displays the Picture Control screen
(page 27).
JPEG
Displays the Menu Control screen
(page 28).
MPEG/DivX®
1
Plays the touched song.
When appears, the text display is
4
Displays/ Clears Source Information screen.
[
]
⁄
scrolled by touching it.
•
The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
[
[
TOP] Moves to the top category.
CUR] Displays the currently playing
category.
[CTRL] Returns to the Source Control screen.
Scrolls to the position of the specified initial
Scrolls to the selected initial.
26
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Control Screen
(Video file, Picture file)
Picture Control
Adjusting the picture display.
Displays the basic operation buttons on the
screen.
1
Display the Playback Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
1
2
Display the Easy Control Screen
See <How to Display the Easy Control Screen>
(page 17).
2
Display the Picture Control Screen
Operation on the Easy Control Screen
1
2
3
3
Adjust the picture display
1, 2 Switches to the Playback screen.
3
Displays the Source Control screen.
[1], [¡]
,
JPEG MPEG/DivX®
Fast Forwards or Fast Backwards.
[4], [¢] Searches for a file.
During the slide show of picture files, touching
the buttons searches the audio file.
[
[
[
]
]
]
Reverses the picture horizontally.
Rotates counter clockwise.
Rotates clockwise.
[7]
Stops playing.
When touched twice, the disc is played from
its beginning when you play it the next time.
Disc
[38] Plays or pauses.
[Exit] Ends Picture Control.
English
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Music Disc/ Audio File Listening & Video File/ Picture File Watching
Movie Menu Control
Selects an option from the Movie Menu.
1
Display the playback screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
2
Display the Menu Control screen
3
Operation on the Menu Control screen
[SUB] Switches the subtitle language.
[Audio] Switches the voice language.
[Exit] Exits the Menu Control screen.
28
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod Control
You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP240V
(optional accessory). You can also display video contents on this unit when connecting an iPod with video.
Playback Screen
Easy Control Screen
Basic functions are available even when the
playback screen is displayed.
Displays the basic operation buttons on the
screen.
1
2
Display the Playback Screen
1
2
Display the Easy Control Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
See <How to Display the Easy Control Screen>
(page 17).
Operation on the Playback Screen
Operation on the Easy Control Screen
2
1
2
1
3
4
3
1, 3 Selects the music/video.
1, 2 Switches to the Playback screen.
2
Not effective
Displays/ Clears Source Information screen.
3
Displays the Source Control screen.
4
[1], [¡] Fast Forwards or Fast Backwards.
[4], [¢] Music/Video Search.
[38] Plays or pauses.
⁄
•
•
•
•
The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
Remove all accessories such as headphone before
connecting an iPod. You may not be able to control the
iPod if you connect it with accessories attached.
When you connect an iPod to this unit, playback starts
from the song you were playing on the iPod itself
(Resume Function).
If the played song is not a video content, "No Video
Signal" is displayed on the video screen.
English
29
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod Control
Multi Function
Source Control Screen
Switches to the source control screen to use
various playback functions.
1
2
Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 14).
[1/2] Switches the multi function display.
Operation on the Source Control Screen
[
[
]
Closes the multi function bar.
Opens the multi function bar.
1
]
[MUSIC] Displays the list of music category.
[VIDEO] Displays the list of video category.
[REP] Repeats the present file or data.
[RDM]* Starts or stops Random play.
[ARDM]* Starts or stops Album Random Play
(plays randomly from current album).
[38] Plays or pauses.
[INFO] Displays information screen of music/
video being played.
[1], [¡] Fast Forwards or Fast Backwards.
[4], [¢] Selects Music/Video.
[List] Displays the iPod list. (page 31)
[LINK]*
Searches for another song of
MUSIC
the currently selected artist. See <Link Search>
(page 31).
[
1
]
Switches to the playback screen.
Information display
⁄
Selects the Title, Artist Name, Album Name
or iPod Name.
* Disabled when VIDEO is being played.
"##### / #####" Total number of music in
the iPod and the music number display
"3" Play Mode Display
"P" Play Time Display
[
]
When
appears, the text display is
scrolled by touching it.
30
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod List
Link Search (Music file)
Lists and searches music/video contained in the
iPod.
Searches for another song of the currently
selected artist.
1
Display the Source Control Screen
1
Display the Source Control Screen
See <Source Control Screen> (page 30).
See <Source Control Screen> (page 30).
2
Display the iPod List
2
Start Link search
3
Select a song
3
Select music/video
1
1
1
Plays the touched song.
When appears, the text display is
1
Categories and music are listed.
Touch a category name to move to its lower
level. If music title is displayed, the music is
played by touching it.
When [38] is appeared, all the music in its
category is played by touching the button.
[
]
scrolled by touching it.
[
[
TOP] Moves to the top category.
CUR] Displays the currently playing
category.
[
]
When
appears, the text display is
[CTRL] Returns to the Source Control screen.
scrolled by touching it.
[
[
[
UP] Returns to previous category.
TOP] Moves to the top category.
CUR] Displays the currently playing
Scrolls to the position of the specified initial
category.
[CTRL] Returns to the Source Control screen.
Scrolls to the position of the specified initial
Scrolls to the selected initial.
Scrolls to the selected initial.
English
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Listening
Various control screens appear in the Tuner Source mode.
Multi Function
Source Control Screen
Switches to the source control screen to use
various functions.
1
2
Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 14).
Operation on the Source Control Screen
1
[1/3] Switches the multi function display.
[
[
]
Closes the multi function bar.
Opens the multi function bar.
]
[P1] – [P6] When [P1] to [P6] buttons appear,
you can recall the stations on memory.
For memory of broadcasting stations, see
<Auto Memory> (page 33) or <Manual
Memory> (page 34).
[FM] Switches to the FM1/2/3 band.
[AM] Switches to the AM band.
[TI] Turns the Traffic Information function On
or Off.
See <Traffic Information>, (page 35).
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
[4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency.
[List] Display the Tuner Preset List screen. See
<Preset Select> (page 33).
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 33).
1
Information display
Selects the Program Service Name, Title &
Artist name, Station Name, Radio Text Plus,
or Radio Text.
[PRE] Lists and selects memorized station.
[4Line]/ [2Line] Switches the number of lines
displayed in the Information Display.
"FM"/ "AM" Band display
"Preset" Preset number
"MHz"/ "kHz" Frequency display
[PTY]
Searches station by program
FM
type.
See <Search by Program Type> (page 35).
[
]
When
appears, the text display is
[Mono]
reception.
Selects the Monaural
FM
scrolled by touching it.
[LO.S] Turns the Local Seek function ON or OFF.
[TEXT] Displays Radio Text screen.
See <Radio Text> (page 34).
FM
32
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset Select
Auto Memory
Lists and selects memorized station.
Stores stations with good reception in memory
automatically.
1
2
Display the Source Control Screen
1
Display the Source Control Screen
See <Source Control Screen> (page 32).
See <Source Control Screen> (page 32).
Display the Tuner Preset List Screen
2
Select a band you wish to store in memory
3
Select a station
3
Select the Auto Memory mode
1
1
Memorized stations are displayed. Touch to
tune in.
[CTRL] Returns to the Source Control screen.
4
Start Auto Memory
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
⁄
•
The operation ends automatically if you do not operate
within 10 seconds.
English
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Radio Listening
Manual Memory
Radio Text
Stores the current receiving station in memory.
You can display the radio text. (Only when
receiving the FM broadcast)
1
2
Display the Source Control Screen
1
Select a station
See <Source Control Screen> (page 32).
See <Source Control Screen> (page 32).
Select a station you wish to store in
memory
2
Display the radio text
3
Store in memory
1
2 sec.
Continue to touch until the memory number
appears.
1
Selects the Program Service Name, Title &
Artist name, Station Name, Radio Text Plus, or
Radio Text for text display.
[
]
When
scrolled by touching it.
[5], [∞] Scrolls the text display.
appears, the text display is
34
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Traffic Information
Search by Program Type
When a traffic bulletin starts, any source is
switched to the traffic information and it is
displayed automatically.
A program is tuned when you set its program
type. (Only when receiving the FM broadcast)
1
Display the Source Control Screen
1
Display the Source Control Screen
See <Source Control Screen> (page 32).
See <Source Control Screen> (page 32).
2
Enter Program Type Search mode
2
Set the Traffic information mode
3
Select a Program Type
When the traffic bulletin starts...
The Traffic Information screen appears
automatically.
1
Traffic Information screen
1
Program Type is displayed. Touch to select a
Program Type.
[Search] Searches for the program type.
It is displayed when the Program type is
selected.
⁄
•
It is necessary to have Traffic Information function set to
On in order to have the Traffic Information screen appear
automatically.
4
Search a station of the selected Program
Type
•
During the reception of traffic information the adjusted
volume is automatically remembered, so that the next
time it switches to traffic information the volume level is
that from the previously adjusted and remembered level.
English
35
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Watching
Various control screens appear in the TV source mode. You can only operate TV with the optional accessory
TV Tuner connected.
Function During TV Screen
Easy Control Screen
Basic functions are available even when the TV
screen is displayed.
Displays the basic operation buttons on the
screen.
1
2
Display the TV screen
1
2
Display the Easy Control Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
See <How to Display the Easy Control Screen>
(page 17).
Operation on the TV screen
Operation on the Easy Control Screen
2
1
2
1
3
4
3
1, 3 Selects a channel.
1, 2 Switches to the TV screen.
2
Switches to TV1 or TV2.
3
Displays the Source Control screen.
2
Displays Menu Control screen (only with
KTC-D500E (optional accessory) connected
(page 37).
[BAND] Switches to TV1 or TV2.
[4], [¢] Selects a channel.
Use the [SEEK] to change the channel tuning
sequence.
4
Displays/ Clears Source Information screen.
[SEEK] Switches the Seek mode. (page 37)
⁄
•
The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
36
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 38).
Source Control Screen
Switches to source control screen to use various
functions.
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
1
2
Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 14).
Operation on the Source Control Screen
1
[PRE] Lists and selects memorized station.
[NAME] Sets a name to the station. See <Set
Station Name> (page 39).
TV Menu (only with KTC-D500E (optional
accessory) connected)
[BAND] Switches to TV1 or TV2.
Menu Control screen appears by touching the
area shown below.
[4], [¢] Select a channel.
Use the [SEEK] to change the channel tuning
sequence.
1
2
Display the TV screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
[List] Display the TV Preset List screen. (page
39).
[
1
]
Switches to the TV screen.
Display the Menu Control screen
Information display
Channel information display
"TV" Band display
"Group" TV Area Group Display. See <TV
Setup> (page 76).
"Preset" Memory Number Display
"ch" Channel display
[
]
When
appears, the text display is
3
Operation on the Menu Control screen
scrolled by touching it.
Multi Function
[1/2] Switches the multi function display.
[Menu] Shows Digital TV Broadcasting menu
screen.
[
[
]
Closes the multi function bar.
Opens the multi function bar.
]
[EPG] Shows EPG (Electric Program Guide)
screen.
[P1] – [P6] When [P1] to [P6] buttons appear,
you can recall channels on memory.
For memory of broadcasting stations, see
<Auto Memory> (page 38) or <Manual
Memory> (page 38).
[2], [3], [5], [∞] Moves highlight in Digital TV
Broadcasting menu.
Next page 3
English
37
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Watching
Manual Memory
[Enter] Executes selected menu item.
(only with KTC-V300E or KTC-V301E
(optional accessory) connected)
[Return] Returns to the previous screen.
[Exit] Returns to Digital TV screen.
Stores the current receiving channel in memory.
⁄
•
When using the remote control unit to operate the TV
menu, use the one of KTC-D500E.
1
2
Display the Source Control Screen
See <Source Control Screen> (page 37).
Select a station you wish to store in
memory
Auto Memory
(only with KTC-V300E or KTC-V301E
(optional accessory) connected)
Stores stations with good reception in memory
automatically.
1
Display the Source Control Screen
See <Source Control Screen> (page 37).
2
Select a band you wish to store in memory
3
Store in memory
2 sec.
Continue to touch until the memory number
appears.
3
Select the Auto Memory mode
4
Start Auto Memory
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
⁄
•
The operation ends automatically if you do not operate
within 10 seconds.
38
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset Select
Set Station Name
Lists and selects memorized station.
Assigns a name to a station.
1
2
Display the Source Control Screen
1
2
Tune in to the station to name
See <Source Control Screen> (page 37).
See <Source Control Screen> (page 37).
Start Preset Select
Start Name set
3
Select a station
1
3
4
Enter the name
See <Character Entry> (page 40) for information
on how to enter a name.
1
Memorized stations are displayed. Touch to
tune in.
Switches to the TV screen.
[CTRL] Returns to the Source Control screen.
End Name set
[
]
English
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
Muting Audio Volume upon Reception of
Phone Call
Character Entry
Character Entry screen
When a telephone call is received...
The Phone Call ("CALL") screen appears, and
system is paused.
1
Phone Call ("CALL") screen
1
Enters characters.
[2], [3] Shifts the cursor.
[5], [∞] Scrolls up or down the character
button display.
[QWE]/ [ABC] Sets the key layout of the
character buttons.
When the call ends...
Hang up the phone.
ABC : Alphabetical key layout.
QWE : Qwerty key layout.
The system resumes playing automatically.
[Clear] Clears the character.
If you erase a character, locate the cursor on it
and touch this button.
⁄
•
To use the TEL Mute feature, you need to hook up
the MUTE wire to your telephone using a commercial
telephone accessory. Refer to <INSTALLATION MANUAL>.
Playback of the source output at the AV OUTPUT port
may not be paused even a call comes in.
If touched more than 1 second, all the input
characters are erased.
•
[Space] Enters a space.
⁄
•
You can enter characters only after you have applied the
parking brake.
40
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Control
Setting the monitor screen.
"NAV-SYNC": Turning the Dimmer function
On or Off according to the
Navigation Day/Night display
setting.
Screen Control
1
Display the Easy Control Screen
See <How to Display the Easy Control Screen>
(page 17).
[Mode] Selects a screen mode.
You can select any of the following screen
mode.
2
Display the Screen Control Screen
"Full", "Just", "Zoom", "Normal"
⁄
•
The Screen Control screen is displayed only when you
have applied the parking brake.
•
•
The picture quality can be set for each source.
You can set image quality of screens such as menu from
<Screen Adjustment> (page 66).
3
Adjust the picture quality
Full picture mode ("Full")
Justify picture mode ("Just")
Zoom picture mode ("Zoom")
Normal picture mode ("Normal")
[Bright] Brightness Control
[Tint] Tint Control
Displayed for an NTSC system image on Video,
iPod, TV or Rear View Camera.
[Color] Color Control
Displayed on Video, iPod, TV or Rear View
Camera screen only.
[Contrast] Contrast Control
[Black] Black Level Adjustment
[Sharpness] Sharpness control
Displayed on Video, iPod, USB, TV or Rear View
Camera screen only.
[Dimmer] Dimmer Mode Setup
"ON": The display dims.
"OFF": The display doesn’t dim.
"SYNC": Turning the Dimmer function On or
Off when the vehicle light control
switch is turned On or Off.
English
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Hands-Free Phoning
Various functions can be used in the Hands Free control mode.
Before Use
Downloading the Phonebook
•
•
•
•
You need to register your cell-phone before using it with
this unit. For more details, see <Registering Bluetooth
unit> (page 66).
If you have registered two or more cell-phones, you need
to select one of them. For more details, see <Bluetooth
Unit Connection> (page 68).
To use the Phone Book, it must be downloaded to this
unit in advance. For details, see <Downloading the
Phonebook> (page 42).
The units supporting the Bluetooth function have been
certified for conformity with the Bluetooth Standard
following the procedure prescribed by Bluetooth
SIG. However, it may be impossible for such units to
communicate with your cell-phone depending on its
type.
Downloads the phonebook data from the
cell-phone to this unit so that you can use the
Phonebook of this unit.
1
By operating the cell-phone, send the
phonebook data to this unit
2
By operating the cell-phone, start the
hands-free connection
⁄
•
For the cell-phones which support auto-download of
phonebook:
If the phonebook is not downloaded automatically for
some reasons, follow the procedure above to download
manually.
•
•
For the cell-phones verified for compatibility, access the
following URL:
Sound output speaker can be set. See <Bluetooth Hands-
Free/Audio Output Setup> (page 69).
•
•
•
For how to operate the cell-phone, refer to the
Instruction Manual that comes with your cell-phone.
Up to 1000 phone numbers can be registered for each
registered cell-phone.
Up to 25 digits can be registered for each phone number
along with up to 50* characters representing a name.
(* 50: Number of alphabetical characters. Fewer
characters can be input depending on the type of
characters.)
•
Depending on the type of your cell-phone, the following
restrictions are placed:
-
-
-
The phonebook data cannot be downloaded normally.
Characters in the Phonebook are garbled.
The phonebook data cannot be downloaded normally
if it contains images. It may take several hours to a full
day to download the phone book depending on the
total image size.
•
To cancel downloading of the phonebook data, operate
the cell-phone.
42
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving a Call
Call Waiting
[
[
]
]
Answering a Phone Call
[
[
]
]
• Answering another incoming call with
the current call suspended
• Switching between the current call and
waiting call
Each touch of this button switches the
calling party.
Rejecting an Incoming Call
⁄
•
While monitoring the rear view camera, this screen is
not displayed even a call comes in. To display this screen,
press the [TEL] button or return the shift knob of car to
the drive position.
• Answering another incoming call after
terminating the current call
• Answering the waiting call after
terminating the current call
During a Call
[
]
Switches the voice output between
phone and speaker.
[DTMF] Outputs dial tone. See <Controlling
Tone-based Services> (page 47).
[
]
Disconnecting a call
English
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Hands-Free Phoning
Making a Call
[Voice] Starts voice recognition.
See <Calling by Voice Recognition> (page 46).
Displaying the control screen and using various
functions.
[BT SETUP] Displays the Bluetooth SETUP
screen. See <Registering Bluetooth Unit>
(page 66).
1
Display the Hands-Free Control screen
[TEL SETUP] Displays the Hands Free Setup
screen. See <Setting Up the Hands-Free
Phone> (page 48).
TEL
AV OUT
⁄
•
While your car is moving, some functions are disabled
due to safety reasons. The buttons associated with the
disabled functions become ineffective if pressed.
2
Select a dialing method
•
•
When the Hands-Free Control screen appears, the name
of the connected cell-phone is displayed for 5 seconds.
1
The status icons such as
and
displayed on the
control unit may discord from those displayed on the
cell-phone.
•
Setting the cell-phone in the private mode can disable
the hands-free function.
1
Calls the displayed phone number. If you
have registered a phone number in the
Phonebook, the destination person name is
displayed.
[
]
Calls the displayed phone number.
[Redial] Displays the previously called phone
number.
[Preset1], [Preset2], [Preset3] Displays the
preset phone number.
For information on how to preset a phone
number, see <Phone Number Preset> (page
51).
[
[
[
[
Phonebook] Displays the Search
for Phonebook screen. See <Calling by
Phonebook> (page 45).
Outgoing Calls] Displays the Outgoing
Calls screen. See <Making a Call Using Call
Records> (page 46).
Incoming Calls] Displays the Incoming
Calls screen. See <Making a Call Using Call
Records> (page 46).
Missed Calls] Displays the Missed
Calls screen. See <Making a Call Using Call
Records> (page 46).
[Direct Number] Displays the Dialing Display
screen. See <Calling by Entering a Phone
Number> (page 45).
44
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling by Phonebook
Calling by Entering a Phone Number
You can call a person using his/her phone
number that you have registered in the
Phonebook.
Makes a call by entering a phone number.
1
2
Display the Hands-Free Control screen
See <Making a call> (page 44).
1
Display the Hands-Free Control screen
Display the number input screen
See <Making a call> (page 44).
2
Display the Phonebook screen
3
Enter a phone number
3
Select the name to call
1
2
1
1
Enters the desired phone number using the
keypad.
[Clear] Clears the number.
1
2
Phonebook data list.
4
Make a call
Displays the Phonebook beginning with the
name whose first character you have touched.
When appears, the text display is
scrolled by touching it.
[
]
Press the green phone icon to dial the entered
phone number.
4
Select the phone number to call
⁄
•
•
You can input up to 25 digits.
This function is unavailable while driving.
5
Make a call
⁄
•
•
This function is unavailable while driving.
To use the Phonebook, it must have been downloaded
from the cell-phone. For more details, see the instruction
manual of your Bluetooth Unit and your cell-phone.
Initials including no corresponding name will not be
displayed.
•
•
During search, a non-accent character such as "u" is
searched for instead of an accent character such as "ü".
English
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Hands-Free Phoning
Making a Call Using Call Records
Calling by Voice Recognition
Calls by selecting a phone number from the
Calls by recognizing the registered voice.
outgoing, incoming, or missed calls list.
⁄
•
1
2
Display the Hands-Free Control screen
In order to perform voice recognition, voice must
be registered in the Phonebook data. See <Voice
Registration> (page 49). Or, to perform voice recognition
by Phone number category (Home, Office, Mobile etc.)
of Phonebook data, a key word voice must be registered.
See <Key Word Voice Registration> (page 50).
See <Making a call> (page 44).
Display the Outgoing Calls, Incoming Calls,
or Missed Calls screen
1
Display the Hands-Free Control screen
See <Making a call> (page 44).
2
Display the Voice Recognition screen
3
Select from calls list
Example : Outgoing Calls screen
7 If there is only one phone number assigned
under the registered name
3
Say the name registered in the Phonebook
Calls the selected phone number.
4
Make a call
When a beep is heard, say the name within 2
seconds.
⁄
•
The Outgoing Calls list screen, Incoming Calls list,
4
Make a call
or Missed Calls list screen shows the list of the calls
originated from or received at this unit. They are not the
ones stored in the cell-phone memory.
46
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
7 If there are more than one phone numbers
Controlling Tone-based Services
assigned under the registered name
Uses tone base service using DTMF (Dual Tone
Multi Frequency).
5
Say the key word registered for the
category
1
2
Display the Talking screen
See <Calling by Entering a Phone Number>
(page 45).
Display the DTMF input screen
When a beep is heard, say the key word within
2 seconds.
6
Make a call
3
You can send tones during a call
7 If there are more than one phone numbers
registered under the same name, go to step 7.
7
Select a Phone number category
Selects the Phone number category.
8
Make a call
⁄
•
A message is displayed if the voice is not recognized.
Read the message for the further operation.
English
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Hands-Free Phoning
[SMS Receive Beep] Sets the beep of the
incoming SMS. ( "ON")
"ON": Beep is heard.
Setting Up the Hands-Free Phone
The Hands-Free system can be set as follows.
"OFF": Beep is canceled.
1
2
Display the Hands-Free Control screen
[Phone Information Use] Sets whether to
use cell-phone phonebook, outgoing calls list,
incoming calls list and missed calls list.
See <Making a call> (page 44).
Display the Hands Free Setup screen
(
"ON")
"ON": Yes.
"OFF": No.
[SMS Use] Sets the SMS function. ( "ON")
"ON": Use SMS function.
"OFF": SMS not available.
[Key Word] Registers the voice to select phone
number category with voice recognition.
See <Key Word Voice Registration> (page 50).
3
Set each item
[Use Phone Voice Recognition]
Sets whether to dial using the phone voice
recognition function. ( "ON")
[Echo Cancel Level] Adjusts the level of echo
cancelling function. ( "15")
[Microphone Level] Adjusts the sensitivity of
the microphone for a telephone call. ( "8")
[Noise Reduction Level] Adjusts the level
of the noise reduction and the quality of the
resulting speech signal. ( "4")
[Restore] Restores the [Echo Cancel Level],
[Microphone Level], or [Noise Reduction Level]
value to the initial value.
⁄
•
Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
[Auto Response] Sets an automatic response
time to pick-up an incoming call.
(
"OFF")
"OFF": This function is disabled.
"0-99": Sets the incoming call ringing duration
(in seconds).
[Call Beep] Sets the beep of the incoming call.
(
"ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
48
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
6
End voice registration
Voice Registration
Registers voice for voice recognition in
Phonebook. Up to 35 voices can be recorded in
one cell-phone.
1
Display the Phonebook Detail screen
Go through the procedure of <Calling by
Phonebook> (page 45).
2
Select the name to register
⁄
•
A message is displayed if the voice is not recognized.
Read the message for the further operation.
•
Repeat from 1st try if the voice is different from the 1st
try.
1
1
Selects a name.
[Record] Registers the voice for voice
recognition to the selected Phonebook. If
there are already 35 voice tag registered
in the same cell-phone, [Record] button is
deactivated.
[Play] Plays the voice registered in the selected
Phonebook data.
[Delete] Deletes the voice registered in the
selected Phonebook data.
Touch to display the confirmation screen.
Touch [Yes] to delete or [No] to cancel.
3
4
Display the voice registration screen
Say the name to register (1st try)
Say within 2 seconds after the Beep.
5
Say the name to register (2nd try)
Say within 2 seconds after the Beep.
English
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Hands-Free Phoning
6
7
Say the phone category to register (2nd try)
Key Word Voice Registration
Say within 2 seconds after the Beep.
Registers the voice to select the Phone number
category by Voice Recognition.
End voice registration
1
2
Display the Hands Free Setup screen
See <Setting Up the Hands-Free Phone> (page
48).
Display the Key Word List screen
⁄
•
A message is displayed if the voice is not recognized.
Read the message for the further operation.
•
Repeat from 1st try if the voice is different from the 1st
try.
3
Select the Phone number category to
register
1
1
Selects the Phone number category.
"REC" turns on for data with voice for voice
recognition already registered.
[Record] Registers voice for the selected
Phone number category.
4
5
Display voice registration screen
Say the phone category to register (1st try)
Say within 2 seconds after the Beep.
50
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Register phone number
Phone Number Preset
Registers frequently used phone number to
Hands Free control screen preset button.
1
Display the Hands-Free Control screen
See <Making a call> (page 44).
2
Select the Preset number to register
1 sec.
⁄
•
If no Preset number is registered, pressing this button
momentarily moves to the step 3.
3
Select the search destination of the number
to register
[
[
[
[
[
[
]
]
]
]
]
]
Registers from SMS received message list.
Registers from SMS sent message list.
Registers from Phonebook.
Registers from outgoing calls list.
Registers from incoming calls list.
Registers from missed calls list.
[Direct Number] Registers by entering phone
numbers.
[Voice] Registers voice for voice recognition to
preset number.
[Memory] Registers the currently displayed
phone number.
[Delete] Deletes the currently displayed phone
number. Touch to display the confirmation
screen. Touch [Yes] to delete or [No] to cancel.
4
Search phone number to register with each
function
English
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Hands-Free Phoning
SMS (Short Message Service)
Uses SMS function.
SMS Message screen
1
2
Display the Hands-Free Control screen
See <Making a call> (page 44).
Display the SMS Select screen
[
SMS] Creates a new message for the
selected message.
3
Select a function
[
]
Displays the SMS create menu screen.
See <Create a message>.
[
[
[
]
]
]
Displays received message list.
Displays sent message list.
Displays the SMS Create Menu screen.
See <Create a message>. The button will be
active when any message has been created
after power-on.
[Download] Retrieves SMS messages from the
cell-phone.
4
Select a message to display
1
1
Calls the number in the selected message.
[DISP] Displays the selected message.
⁄
•
If a large number of SMS messages are stored in
the cell-phone, message list may not be displayed
correctly.
52
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Create a message
4
Send the message
1
Enter phone number / Select contact
[
]
Select a contact from the phonebook.
[Direct Number] Enter the phone number.
[SET] Display the Create SMS Message screen.
[Send] Sends the message.
[Delete] Deletes the Draft message.
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
2
3
Display the Create SMS Message screen
Create a message
1
1
Enters characters.
[2], [3] Moves the cursor.
[5], [∞] Scrolls up or down the character
button display.
[QWE]/ [ABC] Sets the key layout of the
character buttons.
ABC : Alphabetical key layout.
QWE : Qwerty key layout.
[Clear] Erases the entered character.
If touched more than 1 second, all the input
characters are erased.
[Space] Enters a space.
[SET] Saves the message and returns to the
Create SMS Menu screen.
Only one draft message can be saved /
retained in memory at any one time.
English
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Audio Control
Audio Control Menu
Audio Control
Displays the Audio Control menu to set the sound
effect function of this unit.
You can adjust the front/rear and right/left audio
balance.
1
Display the Source Select Screen
1
Display the Audio Control screen
Touch [ ] > [
] > [Audio Control]. (page 54)
2
Set each item
SRC
1
2
Display the Audio Control menu
1
Adjusts the front/back and left/right balance
of the volume by touching the Adjust screen.
[2], [3] Adjusts the right and left volume
balance.
[5], [∞] Adjusts the front and rear volume
balance.
[VOL.Offset] Finely adjust the volume of the
current source to minimize the difference in
volume between different sources.
In this manual, the above selection is indicated
as:
⁄
Touch [ ] > [
].
•
If you have increased the volume first, then reduced
the volume using the "VOL. Offset", the sound
generated if you suddenly switch to another source
may be extremely loud.
3
Select the Audio Control item
[Subwoofer Level] Adjusts the subwoofer
volume.
The setting is available when subwoofer is set
to "ON". See <Speaker Setup> (page 71).
[Loudness] Turns the loudness control
function On or Off.
If turned "ON", high and low tones are
automatically enhanced during low volume.
Settable only when zone function is set to Off.
See <Zone Control> (page 56).
Item
Page
54
55
[Audio Control]
[Equalizer]
[Tone]
55
[Zone Control]
56
[Stream Information] Displays the present
source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.
54
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Equalizer Control
Tone Setup
You can set up the equalizer.
You can set a Tone curve.
1
2
Display the Equalizer screen
1
2
Display the Equalizer screen
Touch [ ] > [
] > [Equalizer]. (page 54)
Touch [ ] > [
] > [Equalizer]. (page 54)
Set each item
Display the Tone Control screen
3
Set the Tone
[SystemQ] Selects an equalizer curve type.
You can select any of the following equalizer
curves.
"Natural"/ "Rock"/ "Pop"/ "Easy"/ "Top40"/
"Jazz"/ "User"
[Bass] Bass adjustment items are displayed.
⁄
[Middle] Middle adjustment items are
displayed.
•
"User":
Your own tone curve can be created. See <Tone
Setup> (page 55).
[Treble] Treble adjustment items are displayed.
[Flat] Tone level becomes 0 (flat).
[FREQ] Sets the Center frequency.
[Level] Sets the level.
[SystemQ-EX] Selects items to be adjusted for
tone curve setup.
If selected "OFF", only Level can be set up for
tone curves.
[Q Factor] Sets the Q factor. (Only [Bass] and
[Middle] can be set)
[Tone] Displays the Tone curve setup screen.
(page 55)
[Bass DC EXT] Bass DC Extend settings. (Only
[Bass] can be set)
If turned "ON", it extends the bass center
frequency to the low register by approximately
20%.
[SW Level] Adjusts the subwoofer volume.
The setting is available when subwoofer is set
to "ON". See <Speaker Setup> (page 71).
English
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Control
Zone Control
You can set the front and rear audio source.
1
2
Display the Zone Control screen
Touch [ ] > [
] > [Zone Control]. (page 54)
Set the Zone Control
[Single Zone] Sets the unit to single zone.
[Dual Zone] Sets the unit to dual zone.
[Front Source] Sets the front audio source.
[Rear Source] Sets the rear audio source.
⁄
•
When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is
also switched to the same source.
[Rear VOL.] Adjusts the volume of the rear
channel.
⁄
•
There are following limitations when zone function is set
to "ON".
- There is no output from the subwoofer.
- <Equalizer Control> (page 55) and <Speaker Setup>
(page 71) are not available.
56
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
You can set up various receiver parameters.
How to Display SETUP Menu Screen
Item
Page
[Information]
[DivX(R)]
[Software]
[System]
Displays the Setup menu to set various functions.
58
58
1
Display the Source Select Screen
[User Interface]
[Touch]
[Clock]
[Security]
[SETUP Memory]
59
61
61
62
63
SRC
[Display]
2
Display the Setup Menu Screen
[Background]
[Color]
64
65
66
66
76
72
75
75
76
69
70
[Screen Adjust]
[Bluetooth SETUP]
[TUNER SETUP]
[DVD SETUP]
[iPod SETUP]
[USB SETUP]
[TV SETUP]
[AV-IN SETUP]
[Navigation]
[Audio SETUP]
[Speaker Select]
[AV Interface]
In this manual, the above selection is indicated
as:
71
70
Touch [ ] > [
].
3
Select the setup item
[5], [∞] Scrolls the setup menu.
⁄
•
[AV-IN SETUP], [Navigation] and [Audio SETUP] options
can be locked. The key mark ( ) is displayed in reverse
video for the locked option. See <Setup Memory> (page
63).
English
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Setup Menu
DivX Setup
Software Information
Checks the registration code. This code is needed
when making a disc which has DRM (Digital
Rights Management).
Checks the software version of this unit.
1
Display the Software Information screen
Touch [ ] > [
] > [Information] >
1
Display the DivX Setup screen
[Software]. (page 57)
Touch [ ] > [
] > [Information] > [DivX].
(page 57)
Displays the software version.
⁄
Displays the registration code.
•
For how to update the software, refer to the relevant
update procedure manual which comes with the
software.
⁄
•
When downloading a DivX VOD file controlled by DRM,
register the code appeared on the screen such as the
one above. Otherwise the file may not be able to play
with this unit. Remaining number of viewing is displayed
when playing a DivX VOD file with the viewing restriction.
When the remaining number of viewing reached 0, a
warning message appears and the file cannot be played.
58
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
[FNC Key Longer than 1 Second] Sets the
function of the [FNC] button.
User Interface
You can setup user interface parameters.
(
"V.OFF")
"V.OFF" : Press the [FNC] button for more than
1 second to turn the display off.
"R-CAM" : Press the [FNC] button for more than
1 second to switch to rear view.
1
Display the User Interface screen
Touch [ ] > [
] > [System] > [User
Interface]. (page 57)
2
Set each item
[Animation] Sets whether to display
animation. ( "ON")
[TV Key Setting] Assign the source to [TV]
button on the front panel. ( "TV")
"TV": The button is assigned as [TV].
"VIDEO1": The button is assigned as [VIDEO1].
[USB Key Setting] Assign the source to [USB]
button on the front panel. ( "USB")
"USB": The button is assigned as [USB].
"iPod": The button is assigned as [iPod].
[Beep] Turns the key touch tone On or Off.
"ON")
(
[Remote Sensor] Selects a remote control
signal. ( "ON")
When turned "OFF", the remote control of TV
reception is rejected.
[Language] Select the language used for the
control screen and setting items. (page 60)
[Scroll] Allows scrolling of text display on the
Source Control screen. ( "Manual")
"Auto": Scrolls the screen automatically.
"Manual": Allows you to scroll the screen
manually.
[Marker] Sets whether to display the target
when touching the panel. ( "OFF")
[Drawer Close] Sets whether to close the
function bar automatically. ( "Manual")
English
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
When [Select Mode] is set to "Advanced"
Language Setting
You can select the display language for the
control screen and audio file tags.
1
2
Display the User Interface screen
[Navigation Language Select] Selects the
language used for navigation.
Touch [ ] > [
] > [System] > [User
Interface]. (page 57)
(
"British English")
Display the Language Setting screen
3
Select a language
[Select Mode] Selects language select mode.
(
"Easy")
"Easy" : Language to display text and tag
information, and language for GUI can
be selected.
Navigation language is set to that
selected in [Text Language Select].
"Advanced" : Language to display text and
tag information, language for
GUI, and language for navigation
information can be selected.
[Text Language Select] Selects the language
to display text information of the selected
source and tag information of the audio/video
files.
(
"British English")
[GUI Language Select] Selects the language
used for the control screen, setting menu and
so forth. ( "Local")
"Local" : Sets the language to that selected in
[Text Language Select].
"English" : Sets the language to English.
[Enter] Determines the selected language.
[Cancel] Cancels the selected language.
60
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Touch Panel Adjustment
Clock Setup
You can adjust the touch panel operations.
You can adjust the clock time.
1
Display the Touch panel Adjustment screen
1
Display the Clock Setup screen
Touch [ ] > [
(page 57)
] > [System] > [Touch].
Touch [ ] > [
(page 57)
] > [System] > [Clock].
2
Adjust the Touch panel
2
Setup the Clock
1
2
Follow the instruction on the screen and touch
1
2
Adjusts hours.
the center of
.
Adjusts minutes.
[Cancel] Cancels the adjustment and returns
to the Touch Panel Adjust screen.
[Reset] Sets "00" minute.
Setup examples: 3:00 – 3:29 \ 3:00
3:30 – 3:59 \ 4:00
[Reset] Resets to the initial status.
[Synchronize] Sets the clock time in
synchronization with the time data sent from
the navigation system or the RDS station.
(
"Navigation")
"OFF"/ "RDS"/ "Navigation"
When the synchronized mode is set, the clock
cannot be adjusted manually.
3
Adjust the clock time
English
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
5
6
Register your security code
Reenter the security code
Security Setup
You can set a security code to protect your
receiver system against theft.
⁄
•
When the Security Code function is activated, the code
cannot be changed and the function cannot be released.
Note the Security Code can be set as the 4 digit number
of your choice.
Reenter the same security code as that you have
entered in Step 4 for confirmation.
⁄
•
If you enter a different security code, the screen
returns to Step 4 (for the first code entry).
1
Display the Security screen
Touch [ ] > [
(page 57)
] > [System] > [Security].
7
Register the security code again
2
Setup the SI (Security Indicator)
Now, your security code is registered.
If you have pressed the Reset button or if you
have disconnected the Receiver from battery...
1
Enter the correct security code
[Security Code Set] Displays the Security code
input screen.
[SI] Turns the SI function on or off.
If turned "ON", the Security indicator on the
front panel flashes when the vehicle ignition is
off. ( "ON")
You must enter the same security code as that
you have entered in Step 4.
3
4
Start Security Code setup
2
Register your security code
⁄
•
If you have already completed the code registration,
[CLR] is displayed.
Now, you can use your Receiver.
Enter a security Code
Input four-digit number.
62
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Memorize or recall the settings
Setup Memory
Audio Control, AV-IN SETUP, AV Interface,
Navigation, and Audio SETUP settings can be
memorized. The memorized settings can be
recalled at any time. For example, even when the
settings are cleared due to replacement of the
battery, the settings can be restored.
When memorizing the Audio Setup and AV
Interface settings:
If settings have already been memorized, a
confirmation message appears. Touch [Yes]. To
cancel memorization, touch [No].
1
Display the SETUP Memory screen
Touch [ ] > [
Memory]. (page 57)
] > [System] > [SETUP
When recalling the memorized settings:
2
Start Setup Memory
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel recalling, touch
[No].
When clearing the currently memorized
settings:
[Lock] Locks the AV-IN SETUP, Navigation,
and Audio SETUP settings. When [Lock] is
selected, you cannot change the AV-IN SETUP,
Navigation, and Audio SETUP settings.
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
[Yes] Memorizes or recalls the settings.
[No] To cancel the function, touch [No]. To
cancel memorization, touch [No].
5
Quit memorization/recalling of settings
The SETUP Menu screen appears again.
3
Select a desired function
[Recall] Recalls the memorized settings.
[Memory] Memorizes the current settings.
[Clear] Clears the currently memorized
settings.
English
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
6
Load the image
Entering Background
Loads a image from the connected USB device
and sets it for the background image.
1
Connect the device which has the image
to load
1
2
Display the Background screen
Touch [ ] > [
[Background]. (page 57)
] > [Display] >
1
Rotates the image.
⁄
3
Display the Background Memory screen
•
•
•
See <About Picture files> (page 6) for readable image
specifications.
The [Memory] button on the “Background” screen
becomes active only in STANDBY source mode.
Pressing the [Memory] button on the “Background”
screen switches the AV OUT source to OFF.
For resetting the AV OUT source, refer to <AV Interface
Setup> section.
•
While loading the Background image, any other
operation is prohibited.
[Change] Selects a image for background.
[Delete] Deletes the background image.
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
Background Change
Selects a image for background.
1
Select Background Change screen
4
Select a medium (USB device)
2
Select a image for background
1
5
Select the image to load
1
1
Returns to the initial background.
3
Set the image as the background
1
Lists the files.
When appears, the text display is
[
]
scrolled by touching it.
[
[
ROOT] Moves to the top hierarchy level.
UP] Moves up a hierarchy level.
64
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
To register your original color
Panel Color Coordinate
1
Start the RGB coordinate
Sets the button illumination color.
1
Display the Color screen
Touch [ ] > [
] > [Display] > [Color].
(page 57)
2
Adjust each color value
2
Display the Panel Color Coordinate screen
1
1
Selects a preset number to register.
[Red Value] Adjusts the Red value.
[Green Value] Adjusts the Green value.
[Blue Value] Adjusts the Blue value.
[Initialize] Initialization resets the settings
made using the Panel Color to the default
settings made at the factory.
[Panel Color Scan] When set to "ON", the
illumination color of the buttons changes one
after another.
3
Select a Preset number to register
⁄
•
When touching [SET] or [Initialize], make sure [Panel
Color Scan] is set to "OFF".
3
Select a color
2 sec.
1
Adjusted color is registered to the selected
Preset button.
4
Complete the color coordination
1
Sets to the touched color.
[Adjust] Sets and registers favorite color to the
preset buttons ([P1] – [P3]).
English
Download from Www.Somanuals.com. All Manuals Search And Download.
65
Setup Menu
Screen Adjustment
Registering Bluetooth Unit
You can adjust the screen mode of the monitor.
Registers the Bluetooth unit to be connected.
1
Display the Screen Adjust screen
1
Display the Bluetooth Setup screen
Touch [ ] > [
Adjust]. (page 57)
] > [Display] > [Screen
Touch [ ] > [
(page 57)
] > [Bluetooth SETUP].
2
Set each item
2
Display the Connect Device List screen
[Bright] Brightness Control
[Contrast] Contrast Control
[Black] Black Level Adjustment
[Dimmer] Dimmer Mode Setup
"ON": The display dims.
3
Search for a Bluetooth unit
1
"OFF": The display doesn’t dim.
"SYNC": Turning the Dimmer function On or
Off when the vehicle light control
switch is turned On or Off.
1
Displays the registered Bluetooth units.
"NAV-SYNC": Turning the Dimmer function
On or Off according to the
The busy service becomes active. The available
service becomes inactive.
Navigation Day/Night display
setting.
[
]
When
appears, the text display is
scrolled by touching it.
⁄
[Search] Searches for a Bluetooth unit.
•
In this Screen Adjust screen, you can perform setups for
the menu screen. Setups for videos such as DVD can be
performed on the <Screen Control> (page 41).
[SP DEV] Registers a Bluetooth unit that
cannot be registered by normal register
(pairing) operation.
⁄
•
A new device cannot be registered if there are
already 5 Bluetooth units registered. Delete
unnecessary registration. See <Bluetooth Unit
Connection> (page 68).
66
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Select the Bluetooth unit to register
Registering Special Bluetooth Unit
Registers Special Bluetooth unit, that resulted
in error by normal registration method, by
selecting from the listed models.
1
1
Display the Special Device List screen
2
Select a model name
1
Displays the searched Bluetooth unit.
[Search] Searches for a Bluetooth unit.
[Cancel] Cancels searching of Bluetooth unit.
5
Enter PIN code
1
Displays the Bluetooth unit name that can be
registered.
3
Confirm whether to register
1
Enters a code number using the keypad.
[Enter] Confirms the entered PIN code. Enter
the PIN code specified for the Bluetooth unit
you are registering.
This button will not be active until at least four
PIN code digits have been entered.
[Cancel] Cancels registration of PIN code.
[Clear] Clears the code number.
⁄
•
⁄
Only models in Bluetooth unit name list can be
registered.
•
You can also register from the Bluetooth unit side. For
the PIN code necessary for registration, see <Registering
Bluetooth Unit PIN Code> (page 68).
If the error message appears even though the PIN code is
correct, try <Registering Special Bluetooth Unit>.
4
Go through the procedure of <Registering
Bluetooth Unit> and complete the
registration (pairing)
•
English
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
Registering Bluetooth Unit PIN Code
Bluetooth Unit Connection
Sets the PIN code of the Bluetooth unit to enter
when registering (pairing) from the cell-phone or
audio player side.
Selects the Bluetooth unit to connect.
1
Display the Bluetooth Setup screen
Touch [ ] > [
] > [Bluetooth SETUP].
1
Display the Bluetooth Setup screen
(page 57)
Touch [ ] > [
(page 57)
] > [Bluetooth SETUP].
2
Display the Connect Device List screen
Select a registered Bluetooth unit
Select the service to use
2
Display the Receiver PIN Code screen
3
3
Enter PIN code
1
4
1
Enters a code number using the keypad.
[Cancel] Cancels registration of PIN code.
[Enter] Registers the entered PIN code.
[Clear] Clears the code number.
[TEL (HFP)] Connects/disconnects cell-phone
to use for Hands Free.
[Remove] Deletes registration (pairing).
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
68
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth Hands-Free/Audio Output
Setup
AV Input Setup
You can set AV input parameters.
Selects speakers to output the sound of hands-
free phoning (such as phone call voice and
ringing tone).
1
2
Display the AV-IN Setup screen
Touch ] > [
] > [AV-IN SETUP]. (page 57)
Set each item
1
Display the Bluetooth Setup screen
Touch [ ] > [
] > [Bluetooth SETUP].
(page 57)
[On Screen AV-IN] Sets an on-screen display
of the AV-IN playback screen. ( "Auto")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
[Bluetooth HF/Audio] Sets the output
speakers. ( "Front Only")
"Front Only" : Outputs from the front speakers.
"All" : Outputs from all the speakers.
[iPod AV Interface Use] Sets the terminal to
which the iPod is connected to. ( "iPod")
[AV-IN1 Name], [AV-IN2 Name] Sets a name
to be displayed when you select a system that
is connected via the AV INPUT port.
(
"VIDEO")
⁄
•
[iPod AV Interface Use]
This item can be set when in STANDBY source and also
the iPod is unconnected.
•
[AV-IN Name]
One AV-IN name is displayed when "iPod" is selected in
[iPod AV Interface Use] and two are displayed when not
selected.
English
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
AV Interface Setup
Navigation Setup
You can set audio and visual (AV) interface
parameters.
You can set Navigation parameters.
1
2
Display the Navigation Setup screen
1
Display the AV Interface screen
Touch [ ] > [
] > [Navigation]. (page 57)
Touch [ ] > [
] > [AV Interface]. (page 57)
Set each item
2
Set each item
[NAV Interrupt Speaker] Selects speakers
used for voice guidance of the navigation
system.
[AV-OUT] Selects an AV source to be output at
the AV OUTPUT port. ( "AV-IN1")
(
"Front All")
[R-CAM Interrupt] Sets a method to switch to
"Front L": Uses the front left side speaker for
voice guidance.
the rear view camera video display.
(
"OFF")
"Front R": Uses the front right side speaker for
voice guidance.
"Front All": Uses both front speakers for voice
guidance.
"ON": Switches to the rear camera video
display when "Reverse" gear is engaged.
"OFF": The monitor does not switch to the
rear view camera video display even
when engaging the shift knob of car to
"Reverse".
[NAV Voice Volume] Adjusts the volume for
voice guidance of the navigation system.
(
"25")
⁄
[NAV Mute] Mutes the volume during voice
guidance of the navigation system.
•
When in DVD source, "AV-OUT" cannot be set to USB.
When in USB source, "AV-OUT" cannot be set to DVD.
(
"ON")
When turned "ON", the volume level drops for
voice guidance.
70
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Crossover Network Setup
You can set a crossover frequency of speakers.
Speaker Setup
You can select a speaker type and its size to get
the best sound effects.
1
Select the speaker to set the crossover
1
2
Display the Speaker Select screen
Touch [ ] > [ ] > [Audio SETUP] >
1
[Speaker Select]. (page 57)
2
Select a speaker you wish to adjust
3
When the speaker type and size are set, the
speaker crossover network and equalizer curve
are set automatically.
1
2
3
Sets the High Pass Filter of the front speaker.
Sets the High Pass Filter of the rear speaker.
Sets the Low Pass Filter of the subwoofer.
1
2
3
Display the Crossover setup screen
2
3
Set the crossover
1
2
3
Front speaker
Rear speaker
Subwoofer
[Subwoofer] Sets the availability of
subwoofers.
[X'over] Displays the Speaker Crossover Setup
screen.
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
[Phase] Sets the phase of subwoofer output.
The phase is reversed 180 degrees when set
to "Reverse".
Sets the subwoofer phase. (Only when
"Subwoofer" is set to "ON" in Speaker Setup,
and [LPF FREQ] is set to other than "Through")
3
Select a speaker type
[HPF FREQ] High Pass Filter adjustment.
(When front or rear speaker is selected on
Speaker Select screen)
[LPF FREQ] Low Pass Filter adjustment. (Only
when "Subwoofer" is set to "ON" in Speaker
Setup)
You can select front speaker type.
"Standard"/ "Wide"/ "Middle"/ "Narrow"
⁄
•
Speaker cannot be setup when in STANDBY source
mode.
English
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
DVD Setup
[Screen Ratio]* Selects the screen display
mode. ( "16:9")
"16:9": Displays wide pictures.
You can set up the DVD play.
1
2
Display the DVD Setup screen
"4:3 LB": Displays wide pictures in the Letter
Box format (having black stripes at the
top and bottom of screen).
"4:3 PS": Displays wide pictures in the Pan &
Scan format (showing pictures cut at
the right and left ends).
Touch [ ] > [
] > [DVD SETUP]. (page 57)
Set each item
[Parental Level]* Displays the Parental Lock
screen. ( "OFF")
(See <DVD Parental Level Setup>, page 73)
[Disc SETUP] Makes the settings related to the
disc media. (See <Disc Setup>, page 74)
⁄
•
* Disabled when a DVD is being played.
[Menu Language]* Selects a disc menu
language.
(See <DVD Language Setup>, page 73)
[Subtitle Language]* Selects a subtitle
language.
(See <DVD Language Setup>, page 73)
[Audio Language]* Selects an audio
language.
(See <DVD Language Setup>, page 73)
[Dynamic Range Control]* Sets the dynamic
range. ( "Dialog")
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen to
the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
The operation is available during the play stop
mode.
[Angle Mark] Sets an angle mark display.
(
"ON")
72
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Parental Level Setup
DVD Language Setup
Sets a parental level.
Selects a language you use for the speech and
menus.
1
2
Display the DVD Setup screen
1
Display the DVD Setup screen
Touch [ ] > [
] > [DVD SETUP]. (page 57)
Touch [ ] > [
] > [DVD SETUP]. (page 57)
Display the Parental Level code number
screen
2
Select the language item to set
3
Enter a language code
See <DVD Language Codes> (page 79) and
select the desired language.
3
Enter the code number
1
1
1
Enters a language code.
1
Enters a code number.
[Cancel] Cancels the language setup and
returns to the "DVD SETUP" screen.
[Cancel] Cancels the current setup and returns
to the "DVD SETUP" screen.
[Enter] Sets the language and returns to the
"DVD SETUP" screen. (It appears after you have
entered a language code.)
[Level] Indicates the present parental lock
level.
[Original] Sets the DVD's original language
[Enter] Determines the code number and
(only when setting an audio language).
displays the Parental Level setup screen.
[Clear] Clears the language code.
[Clear] Clears the code number.
⁄
4
Set the language you use
•
The number you enter first is set as your code
number.
4
Display the Parental Level SETUP screen
Next page 3
English
Download from Www.Somanuals.com. All Manuals Search And Download.
73
Setup Menu
5
Select a parental level and complete the
setup
Disc Setup
Performs setup when using disc media.
1
2
Display the DVD Setup screen
Touch [ ] > [
] > [DVD SETUP]. (page 57)
Display the Disc Setup screen
Selects a parental level.
⁄
•
•
•
If a disc has higher parental lock level, you need to enter
the code number.
The parental lock level varies depending on a loaded
disc.
If a disc has no parental lock, anybody can play it back
even when you have set the parental lock.
3
Set each item
[Picture Display Time] Selects a picture
display time. ( "Long")
The Display of a JPEG picture is changed.
("Short", "Middle", "Long")
[CD Read] Sets a music CD playback. ( "1")
"1": Automatically recognizes and plays back
an Audio file disc, a DVD or a music CD.
"2": Forcibly plays back a disc as a music CD.
Select "2" if you wish to play a music CD
having a special format or if you cannot
play a disc in the "1" position.
[On Screen DVD] Sets an on-screen display of
the DVD Playback screen. ( "Manual")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
⁄
•
[CD Read]
Disabled when a disc is in the unit.
You cannot play an Audio file/VCD disc in the "2"
position. Also, you may not play some music CDs in the
"2" position.
74
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Setup
iPod Setup
Performs setup when using USB.
Performs setup when using iPod.
1
2
Display the USB Setup screen
1
2
Display the iPod Setup screen
Touch [ ] > [
] > [USB SETUP]. (page 57)
Touch [ ] > [
] > [iPod SETUP]. (page 57)
Set each item
Set each item
[Picture Display Time] Selects a picture
display time. ( "Long")
[AudioBook Speed] Sets the Audio book
playback speed. ( "Normal")
The Display of a JPEG picture is changed.
("Short", "Middle", "Long")
[Wide Screen] Sets Wide Screen on or off.
(
"OFF")
[On Screen USB] Sets an on-screen display of
the USB Playback screen. ( "Auto")
"Auto": Information is displayed for 5 seconds
when updated.
[On Screen iPod] Sets an on-screen display of
the iPod Playback screen. ( "Auto")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
"Manual": Information is displayed when you
touch on the screen.
⁄
•
"Wide Screen" cannot be set while the iPod is connected.
English
Download from Www.Somanuals.com. All Manuals Search And Download.
75
Setup Menu
Tuner Setup
TV Setup
You can set Tuner related parameters.
The TV signal receiving areas can be set.
1
2
Display the TV SETUP screen
1
2
Display the Tuner Setup screen
Touch [ ] > [
] > [TV SETUP]. (page 57)
Touch [ ] > [
] > [TUNER SETUP]. (page
57)
Set each item
Set each item
[TV1 Area], [TV2 Area] Sets the TV receiving
area. (only when KTC-V300E/KTC-V301E
(optional accessory) connected)
[On Screen TV] Sets an on-screen display of
the TV screen. ( "Auto")
(only when the optional accessory TV tuner
connected)
"Auto": Information is displayed for 5 seconds
when updated.
[NEWS] Sets a news bulletin interrupt time.
(
"OFF")
[AF] When station reception is poor,
automatically switches to the station that
is broadcasting the same program over the
same RDS network. ( "ON")
"Manual": Information is displayed when you
touch on the screen.
3
Set up TV (only when KTC-V300E/KTC-
V301E (optional accessory) connected)
[Regional] Sets whether to switch to the
station only in the specific region using the
"AF" control. ( "ON")
Example : TV1 Area screen
[Auto TP Seek] When traffic information
station reception is poor, automatically
searches for a station that can be received
better. ( "ON")
[Language Select] Selects a display language
for the PTY function.
Sets the present TV1 or TV2 receiving area.
76
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is
displayed.
Initial Setup
1
2
Turn the power On
Set each item
[Language] Select the language used for the
control screen and setting items. (page 60)
[iPod AV Interface Use] Sets the terminal to
which the iPod is connected to. ( "iPod")
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display.
(
"OFF")
"ON": Switches to the rear camera video
display when "Reverse" gear is engaged.
"OFF": The monitor does not switch to the
rear view camera video display even
when engaging the shift knob of car to
"Reverse".
[Color] Sets the screen and button illumination
color. (page 65)
3
End initial setup
⁄
•
The settings above can be changed in <Setup Menu>
(page 57).
English
Download from Www.Somanuals.com. All Manuals Search And Download.
77
Status bar Indicator items
Source Display Overview
Shown below is a list of indicators displayed on
the Status bar.
USB
"FO-REP" Indicates that the Folder repeat function is ON.
"MOVIE" Identifies the video file.
"MUSIC" Identifies the music file.
"PICTURE" Identifies the image file.
"RDM" Indicates that the Random function is ON.
"REP"
Identifies that the Repeat function is ON.
"PLST" Indicates that the Play list mode is selected now.
"SLIDE" Indicates that the slide show function is ON.
"MUSIC" Identifies the music file.
iPod
"VIDEO" Identifies the video file.
"RDM" Indicates that the Random function is ON.
"A-RDM" Indicates that the Album random function is ON.
Source Display Overview
General "ATT"
"DUAL" Turns on the Dual zone function.
"TEL" Indicates the connection state of the Bluetooth hands-free
unit. (Orange: Connected. White: Not connected.)
DVD/CD "FO-REP" Indicates that the Folder repeat function is ON.
Indicates that the attenuator is active.
"REP"
"AF"
Indicates that the Repeat function is ON.
Indicates that the AF search function is ON.
Tuner
"AUTO1" Indicates that Seek mode is set to Auto1.
"AUTO2" Indicates that Seek mode is set to Auto2.
"EON" Indicates that the RDS station is sending EON.
"LO.S" Indicates that the Local seek function is ON.
"MANU" Indicates that Seek mode is set to Manual.
"MONO" Indicates that the forced monaural function is ON.
"NEWS" Indicates that news bulletin interruption is in progress.
MEDIA
"IN"
Indicates that a disc is inserted. (White: A Disc is inside the
unit. Orange: Error at the disc player.)
"MOVIE" Identifies the video file.
"MUSIC" Identifies the music file.
"PICTURE" Identifies the image file.
"RDM" Indicates that the Random function is ON.
"RDS" Indicates the state of the RDS station when the AF function
is ON. (Orange: RDS is being received. White: RDS is not
being received.)
"REP"
Indicates that the Repeat function is ON.
"SLIDE" Indicates that the slide show function is ON.
"ST"
"TI"
Indicates that stereo broadcast is being received.
DVD-Video "C-REP" Indicates that the Chapter repeat function is ON.
"T-REP" Indicates that the Title repeat function is ON.
DVD-VR "1 M/S" Identifies the primary/secondary audio output of stream 1.
"1 MAIN" Identifies the primary audio output of stream 1.
"1 SUB" Identifies the secondary audio output of stream 1.
"PLST" Identifies the Play list mode.
Indicates the reception state of traffic information.
(Orange: TP is being received. White: TP is not being
received.)
TV
"AUTO1" Indicates that Seek mode is set to Auto1.
"AUTO2" Indicates that Seek mode is set to Auto2.
"MANU" Indicates that Seek mode is set to Manual.
"T-REP" Indicates that the Title repeat function is ON.
VCD
"1chLL" Identifies the left audio output of channel 1.
"1chLR" Identifies the monaural audio output of channel 1.
"1chRR" Identifies the right audio output of channel 1.
"1chST" Identifies the stereo audio output of channel 1.
"LL"
Identifies the left audio output.
"LR"
"RR"
"ST"
"PBC"
Identifies the monaural audio output.
Identifies the right audio output.
Identifies the stereo audio output.
Indicates that the PBC function is ON.
"SVCD" Identifies the Super Video CD.
"VER1" Indicates that the Video CD version is 1.
"VER2" Indicates that the Video CD version is 2.
"REP"
Indicates that the Repeat function is ON.
78
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Language Codes
Code
aa
ab
af
am
ar
as
ay
az
ba
be
bg
bh
bi
bn
bo
br
ca
co
cs
cy
da
de
dz
el
en
eo
es
et
Language
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Code
is
it
ja
jv
ka
kk
kl
km
kn
ko
ks
ku
ky
la
Language
Icelandic
Italian
Japanese
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Luxembourgish
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Code
si
sk
sl
sm
sn
so
sq
sr
ss
st
su
sv
sw
ta
Language
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
lb
ln
lo
lt
te
Telugu
Tajik
Thai
tg
th
ti
tk
tl
tn
to
tr
ts
tt
tw
uk
ur
uz
vi
vo
wo
xh
yo
zh
zu
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
lv
Welsh
Danish
German
Bhutani
Greek
mg
mi
mk
ml
mn
mo
mr
ms
mt
my
na
ne
nl
no
oc
om
or
pa
pl
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Twi
Ukrainian
Urdu
eu
fa
fi
fj
fo
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
fr
fy
Yoruba
Chinese
Zulu
ga
gd
gli
gn
gu
ha
he
hi
Polish
ps
pt
qu
rm
rn
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Hebrew
Hindi
ro
ru
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
hr
hu
hy
ia
ie
ik
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
rw
sa
sd
sg
sh
Serbo-Croatian
id
English
Download from Www.Somanuals.com. All Manuals Search And Download.
79
Help?
Troubleshooting
Some functions of this unit may be disabled by
some settings made on this unit.
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
!
• Cannot set up the subwoofer.
• Cannot set up subwoofer phase.
• No output from the subwoofer.
• Cannot set up the low pass filter.
• Cannot set up the high pass filter.
General
?
The Touch Sensor Tone doesn’t sound.
✔
The preout jack is being used.
Subwoofer is not set to On.
☞ <Speaker Setup> (page 71)
☞
The Touch Sensor Tone can’t be output from
the preout jack.
The Dual zone function is enabled.
☞ <Zone Control> (page 56)
Tuner source
Radio reception is poor.
The unit is set to STANDBY source.
?
!
!
• Cannot select the output destination of the
subsource in the Dual zone.
• Cannot adjust the volume of the rear
speakers.
The Dual zone function is disabled.
☞ <Zone Control> (page 56)
✔
The car antenna is not extended.
☞
Pull the antenna out all the way.
✔
The antenna control wire is not connected.
☞
Connect the wire correctly, referring to the
section on <INSTALLATION MANUAL>.
Disc source
The specified disc does not play, but another
one plays instead.
Cannot play audio files.
"CD Read" of <Disc Setup> (page 74) is set to
"2".
?
✔
The specified CD is quite dirty.
!
!
!
Cannot Folder select.
The Random play function is enabled.
☞
Clean the CD.
✔
The disc is severely scratched.
Try another disc instead.
☞
Cannot perform Repeat play.
The PBC function is enabled.
Audio file source
• Cannot set up the equalizer.
• Cannot set up the crossover network.
The Dual zone function is enabled.
☞ <Zone Control> (page 56)
?
The sound skips when an Audio file is being
played.
✔
The media is scratched or dirty.
☞
Clean the media, referring to the CD
cleaning of the section on <Handling discs>
(page 4).
The unit is set to STANDBY source.
✔
The recording condition is bad.
☞
Record the media again or use another
media.
Hands-Free operation
SMS messages are not displayed correctly.
Turn off the unit and turn it back on.
?
☞
80
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
Help?
Error
"No Media File" :
The connected USB device contains no playable audio
file.
When the unit fails to operate correctly, the cause
of the failure appears on the display.
Media was played that doesn’t have data recorded that
the unit can play.
"Protect" :
Protective circuit has been activated because a speaker
cord has shorted or it has come in contact with the car
chassis.
➡ Wire or insulate the speaker cord as appropriate
and then push the Reset button.
"USB Device Error!!" :
The connected USB device is rated a current capacity
higher than the allowable limit.
➡ Check the USB device.
Some trouble may have occurred to the connected
USB device.
➡ Change the source to any source other than USB.
Remove the USB device.
"Hot Error" :
When the internal temperature of this unit rises to 60°C
or more, the protection circuit is activated and you
may not be able to operate the unit. At such times this
message will appear.
➡ Use the unit again after reducing the
temperature inside the vehicle.
"Authorization Error" :
Connection to the iPod has failed.
➡ Remove the iPod and then reconnect it.
The unit does not support the iPod.
➡ Refer to <iPod/iPhone that can be connected to
this unit> (page 6).
"Mecha Error" :
The disc player is malfunctioning.
➡ Eject the disc and try inserting it again. Contact
the Kenwood dealer if this indicator continues
blinking or the disc cannot be ejected.
"Update your iPod" :
The iPod's software is an older version which the unit
can not support.
➡ Confirm that the software for the iPod is the
latest version. Refer to <iPod/iPhone that can be
connected to this unit> (page 6).
"Disc Error" :
Disc is quite dirty.
➡ Clean the disc, referring tot he section on
<Handling discs> (page 4).
Disc is upside down.
➡ Load the disc with the labeled side up.
An unplayable disc is inserted.
"You only can connect one iPod." :
More than one iPod are connected to this unit.
➡ Connect only one iPod to the USB terminal with
iPod tag.
"Region Code Error" :
The disc you wanted to play has a region code that
cannot be played with this unit.
"Navigation Error. Please turn on power again
later." :
The communication error has occurred due to severely
cold temperature.
➡ Turn on power again after warming your car
interior.
"Parental Level Error" :
The disc you wanted to play has a higher level than the
parental level you set.
"No Device" (USB device):
The USB device is selected as a source although no USB
device is connected.
➡ Change the source to any source other than USB.
Connect an USB device, and change the source
to USB again.
"Disconnected" (iPod):
The iPod is selected as a source although no iPod is
connected.
➡ Change the source to any source other than iPod.
Connect an iPod, and change the source to iPod
again.
English
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Monitor section
USB interface section
Picture Size
USB Standard
: 7 inches (diagonal) wide
: USB 2.0
: 156.6 mm (W) x 81.6 mm (H)
File System
Display System
: FAT 16/ 32
: Transparent TN LCD panel
Maximum Power Supply Current
Drive System
: 500 mA
: TFT active matrix system
D/A Converter
Number of Pixels
: 24 Bit
: 1,152,000 (800H x 480V x RGB)
Video Decoder
Effective Pixels
: MPEG1/ MPEG2/ DivX
: 99.99 %
Audio Decoder
Pixel Arrangement
: MP3/ WMA/ AAC/ WAV
: RGB striped arrangement
Back Lighting
: LED
Bluetooth section
Technology
: Bluetooth Ver. 2.0 Certified
DVD player section
Frequency
D/A Converter
: 2.402 – 2.480 GHz
: 24 bit
Output Power
Audio Decoder
: +4dBm (MAX), 0dBm (AVE), Power Class2
: Linear PCM/ Dolby Digital/ dts/ MP3/ WMA/
AAC/ WAV
Maximum Communication range
: Line of sight approx. 10 m (32.8 ft)
Video Decoder
: MPEG1/ MPEG2/ DivX
Profile
HFP (Hands Free Profile)
SPP (Serial Port Profile)
HSP (Headset Profile)
Wow & Flutter
: Below Measurable Limit
OPP (Object Push Profile)
PBAP (Phonebook Access Profile)
SYNC (Synchronization Profile)
Frequency Response
Sampling frequency 96 kHz : 20 – 22,000 Hz
Sampling frequency 48 kHz : 20 – 22,000 Hz
Sampling frequency 44.1 kHz : 20 – 20,000 Hz
Total Harmonic Distortion
: 0.010 % (1 kHz)
S/N Ratio (dB)
: 98 dB (DVD-Video 96 kHz)
Dynamic Range
: 98 dB (DVD-Video 96 kHz)
Disc Format
: DVD-Video/ VIDEO-CD/ CD-DA
Sampling Frequency
: 44.1/ 48/ 96 kHz
Quantifying Bit Number
: 16/ 20/ 24 bit
82
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
FM tuner section
Video section
Frequency Range
Color System of External Video Input
50 kHz : 87.5 MHz – 108.0 MHz
: NTSC/ PAL
Usable Sensitivity (S/N : 26 dB)
External Video Input Level (mini jack)
: 0.7 μV/ 50 Ω
: 1 Vp-p/ 75 Ω
Quieting Sensitivity (S/N : 46 dB)
External Audio Max Input Level (mini jack)
: 1.6 μV/ 75 Ω
: 2 V/ 25 kΩ
Frequency Response ( 3.0 dB)
Video Output Level (RCA jacks)
: 30 Hz – 15 kHz
: 1 Vp-p/ 75 Ω
S/N Ratio (dB)
Audio Output Level (RCA jacks)
: 65 dB (MONO)
: 1.2 V/ 10 kΩ
Selectivity ( 400 kHz)
: ≥ 80 dB
Audio section
Stereo Separation
: 35 dB (1 kHz)
Maximum Power (Front & Rear)
: 50 W x 4
Full Bandwidth Power (Front & Rear)
: 30 W x 4 (PWR DIN 45324, +B=14.4 V)
LW tuner section
Frequency Range (9 kHz)
Preout Level (V)
: 153 kHz – 279 kHz
: 2 V/ 10 kΩ
Usable Sensitivity
Preout Impedance
: 45 μV
: ≤ 600 Ω
Speaker Impedance
: 4 – 8 Ω
MW tuner section
Tone Action
Bass : 100 Hz 8 dB
Middle : 1 kHz 8 dB
Treble : 10 kHz 8 dB
Frequency Range (9 kHz)
: 531 kHz – 1611 kHz
Usable Sensitivity
: 25 μV
English
Download from Www.Somanuals.com. All Manuals Search And Download.
83
Specifications
Navigation section
Receiver
: High-sensitivity GPS receiver
Reception Frequency
: 1575.42 MHz (C/A code)
Acquisition Times
Cold : < 38 seconds
Factory Reset : < 45 seconds
(On average for a stationary receiver with a clear
view of the sky)
Accuracy
Position : < 10 meters typical
Velocity : 0.05 m/sec. RMS
Position Method
: GPS
Antenna
: External GPS antenna
General
Operating voltage
: 14.4 V (10.5 – 16 V allowable)
Maximum Current Consumption
: 15 A
Installation Dimensions (W × H × D)
: 182 × 100 × 150 mm
7-3/16 x 3-15/16 x 5-7/8 inch
Operational Temperature Range
: -10 °C – +60 °C
Storage Temperature Range
: -20 °C – +85 °C
Weight
: 2.1 kg (4.6 lbs)
Specifications subject to change without notice.
Although the effective pixels for the liquid crystal panel is
given as 99.99% or more, 0.01% of pixels may not light or
may light incorrectly.
84
DNX520VBT
Download from Www.Somanuals.com. All Manuals Search And Download.
The "AAC" logo is a trademark of Dolby Laboratories.
Font for this product is designed by Ricoh.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
iPhone is a trademark of Apple Inc.
iTunes is a trademark of Apple Inc.
“Made for iPod”means that an electronic accessory has been designed to connect specifically to iPod and has been certified
by the developer to meet Apple performance standards.
“Works with iPhone”means that an electronic accessory has been designed to connect specifically to iPhone and has been
certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol and DTS 2.0 Channel are
trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
ABOUT DIVX VIDEO:
DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To
generate the registration code, locate the DivX VOD section in <DivX Setup> (page 58). Go to vod.divx.com
with this code to complete the registration process and learn more about DivX VOD.
DivX® is a registered trademark of DivX, Inc., and is under license.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation
is under license. Other trademarks and trade names are those of their respective owners.
The marking of products using lasers
The label is attached to the chassis/case and says that the component
uses laser beams that have been classified as Class 1. It means that the
unit is utilizing laser beams that are of a weaker class. There is no danger
of hazardous radiation outside the unit.
CLASS 1
LASER PRODUCT
English
85
Download from Www.Somanuals.com. All Manuals Search And Download.
· Declaration of Conformity with regard to the EMC Directive 2004/108/EC
· Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
English
Svenska
Hereby, Kenwood declares that this unit DNX520VBT is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Français
Härmed intygar Kenwood att denna DNX520VBT stär l överensstämelse med
de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår
av direktiv 1999/5/EG.
Par la présente Kenwood déclare que l’appareil DNX520VBT est conforme aux
exigences essentielles et aux autres dispositions pertinentes de la directive
1999/5/CE.
Par la présente, Kenwood déclare que ce DNX520VBT est conforme aux
exigences essentielles et aux autres dispositions de la directive 1999/5/CE qui
lui sont applicables.
Suomi
Kenwood vakuuttaa täten että DNX520VBT tyyppinen laite on direktiivin
1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen
mukainen.
Slovensko
S tem Kenwood izjavlja, da je ta DNX520VBT v skladu z osnovnimi zahtevami
in ostalimi ustreznimi predpisi Direktive 1999/5/EC.
Slovensky
Spoločnosť Kenwood týmto vyhlasuje, že DNX520VBT spĺňa zákldné
požiadavky a ďalšie prislušné ustanovenia Direktĺvy 1999/5/EC.
Dansk
Undertegnede Kenwood erklærer harved, at følgende udstyr DNX520VBT
overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Ελληνικά
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Kenwood ΔΗΛΩΝΕΙ ΟΤΙ DNX520VBT ΣΥΜΜΟΡΦΩΝΕΤΑΙ
ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ
ΟΔΗΓΙΑΣ 1999/5/EK.
Eesti
Sellega kinnitab Kenwood, et see DNX520VBT vastab direktiivi 1999/5/EC
põhilistele nõudmistele ja muudele asjakohastele määrustele.
Latviešu
Ar šo, Kenwood, apstiprina, ka DNX520VBT atbilst Direktīvas 1999/5/EK
galvenajām prasībām un citiem tās nosacījumiem.
Lietuviškai
Šiuo, Kenwood, pareiškia, kad šis DNX520VBT atitinka pagrindinius Direktyvos
1999/5/EB reikalavimus ir kitas svarbias nuostatas.
Malti
Deutsch
Hiermit erklärt Kenwood, dass sich dieser DNX520VBT in Übereinstimmung mit
den grundlegenden Anforderungen und den anderen relevanten Vorschriften
der Richtlinie 1999/5/EG befindet. (BMWi)
Hiermit erklärt Kenwood die Übereinstimmung des Gerätes DNX520VBT mit
den grundlegenden Anforderungen und den anderen relevanten Festlegungen
der Richitlinie 1999/5/EG. (Wien)
Nederlands
Hierbij verklaart Kenwood dat het toestel DNX520VBT in overeenstemming
is met de essentiële eisen en de andere relevante bepalingen van richtlijn
1999/5/EG.
Bij deze verklaat Kenwood dat deze DNX520VBT voldoet aan de essentiële
eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.
Italiano
Con la presente Kenwood dichiara che questo DNX520VBT è conforme ai
requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva
1999/5/CE.
Español
Por medio de la presente Kenwood declara que el DNX520VBT cumple con los
requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de
la Directiva 1999/5/CE.
Português
Kenwood declara que este DNX520VBT está conforme com os requisitos
essenciais e outras disposições da Directiva 1999/5/CE.
Polska
Hawnhekk, Kenwood, jiddikjara li dan DNX520VBT jikkonforma mal-ħtiġijiet
essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/
EC.
Kenwood niniejszym oświadcza, że DNX520VBT spełnia zasadnicze wymogi
oraz inne istotne postanowienia dyrektywy 1999/5/EC.
Český
Kenwood timto prohlasuje, ze DNX520VBT je ve shode se zakladnimi
pozadavky a s dalsimi prislusnymi ustanoveni Narizeni vlady c. 426/2000 Sb.
Magyar
Українська
Компанія Kenwood заявляє, що цей виріб DNX520VBT відповідає
ключовим вимогам та іншим пов’язаним положенням Директиви
1999/5/EC.
Alulírott, Kenwood, kijelenti, hogy a jelen DNX520VBT megfelel az 1999/5/
EC irányelvben meghatározott alapvető követelményeknek és egyéb vonatkozó
előírásoknak.
Download from Www.Somanuals.com. All Manuals Search And Download.
Information on Disposal of Old Electrical and Electronic Equipment and Batteries
(applicable for EU countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed
as household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility
capable of handling these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you.
Proper recycling and waste disposal will help conserve resources whilst preventing
detrimental effects on our health and the environment.
Notice: The sign "Pb" below the symbol for batteries indicates that this battery contains
lead.
This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional
importer of a vehicle into an EU Member State.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Insignia Car Stereo System NS C3111 User Manual
Intel Computer Hardware SA 1100 User Manual
JVC Camcorder D 9 User Manual
Karcher Pressure Washer K 2300 User Manual
Kenwood Food Processor BLX50 User Manual
Kenwood Stereo System VR 9070 User Manual
Keys Fitness Home Gym ST NBB User Manual
KitchenAid Range W10044930B User Manual
Knoll Stereo Amplifier MA215E User Manual
Koss Home Theater System KS4192 User Manual