RC-D710
CONTROL PANEL
INSTRUCTION MANUAL
PANNEAU DE CONTROLE
MODE D’EMPLOI
PANEL DE CONTROL
MANUAL DE INSTRUCCIONES
コントロールパネル
取扱説明書
Only basic operations are explained in this instruction manual.
For a detailed explanation on the operations, refer to the PDF file
supplied on the CD-ROM.
Seules les fonctions de base sont expliquées dans ce mode
d’emploi. Pour le détail sur les autres opérations, reportez-vous au
fichier PDF à votre disposition sur le CD-ROM.
En este manual de instrucciones solamente se explican
las operaciones básicas. Si desea obtener una descripción
detallada de las operaciones, consulte el archivo PDF
correspondiente incluido en el CD-ROM.
本取扱説明書の操作説明は基
本的な内容を記載しています。各機能の詳
細説明は付属CD-ROM内の取扱説明書（PDF形式）をご覧ください。
© B62-2003-00 (W)
09 08 07 06 05 04 03 02 01 00
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank You
We are grateful you decꢀded to purchase thꢀs RC-D710.
FeaTures
RC-D710 has the followꢀng maꢀn features:
•
•
•
Has a buꢀlt-ꢀn TNC whꢀch conforms to the AX.25protocol. Wꢀth a portable computer,
allows you to enjoy Packet operatꢀon quꢀte easꢀly.
Includes a program for dealꢀng wꢀth data formats supported by Automatꢀc Packet/
Posꢀtꢀon Reportꢀng System (APRS®).
<RC-D710 + TM-V71>
When the RC-D710 ꢀs connected to the TM-V71A/E, the avaꢀlable functꢀons are the
same as the TM-D710A/E.
•
<RC-D710 + PG-5J>
When the RC-D710 ꢀs connected to the DATA termꢀnal of a transceꢀver vꢀa the PG-5J
(optꢀon), wꢀth the RC-D710 buꢀlt-ꢀn TNC, you can use PACKET and APRS mode (Stand
Alone mode).
noTices To The user
One or more of the followꢀng statements may be applꢀcable:
FCC WARNING
Thꢀs equꢀpment generates or uses radꢀo frequency energy. Changes or modꢀfꢀcatꢀons to thꢀs
equꢀpment may cause harmful ꢀnterference unless the modꢀfꢀcatꢀons are expressly approved ꢀn the
ꢀnstructꢀon manual. The user could lose the authorꢀty to operate thꢀs equꢀpment ꢀf an unauthorꢀzed
change or modꢀfꢀcatꢀon ꢀs made.
INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC
Thꢀs equꢀpment has been tested and found to comply wꢀth the lꢀmꢀts for a Class B dꢀgꢀtal devꢀce,
pursuant to Part 15 of the FCC Rules. These lꢀmꢀts are desꢀgned to provꢀde reasonable protectꢀon
agaꢀnst harmful ꢀnterference ꢀn a resꢀdentꢀal ꢀnstallatꢀon.
Thꢀs equꢀpment generates, uses and can generate radꢀo frequency energy and, ꢀf not ꢀnstalled and
used ꢀn accordance wꢀth the ꢀnstructꢀons, may cause harmful ꢀnterference to radꢀo communꢀcatꢀons.
However, there ꢀs no guarantee that the ꢀnterference wꢀll not occur ꢀn a partꢀcular ꢀnstallatꢀon. If
thꢀs equꢀpment does cause harmful ꢀnterference to radꢀo or televꢀsꢀon receptꢀon, whꢀch can be
determꢀned by turnꢀng the equꢀpment off and on, the user ꢀs encouraged to try to correct the
ꢀnterference by one or more of the followꢀng measures:
•
•
•
Reorꢀent or relocate the receꢀvꢀng antenna.
Increase the separatꢀon between the equꢀpment and receꢀver.
Connect the equꢀpment to an outlet on a cꢀrcuꢀt dꢀfferent from that to whꢀch the receꢀver ꢀs
connected.
•
Consult the dealer for technꢀcal assꢀstance.
Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU
countries that have adopted separate waste collection systems)
Products wꢀth the symbol (crossed-out wheeled bꢀn) cannot be dꢀsposed as household waste.
Old electrꢀcal and electronꢀc equꢀpment should be recycled at a facꢀlꢀty capable of handlꢀng these ꢀtems
and theꢀr waste byproducts. Contact your local authorꢀty for detaꢀls ꢀn locatꢀng a recycle facꢀlꢀty nearest
to you. Proper recyclꢀng and waste dꢀsposal wꢀll help conserve resources whꢀlst preventꢀng detrꢀmental
effects on our health and the envꢀronment.
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
PrecauTions
Observe the followꢀng precautꢀons to prevent fꢀre, personal ꢀnjury, and RC-D710/
transceꢀver damage.
•
•
•
•
When operatꢀng mobꢀle, do not attempt to confꢀgure the RC-D710 whꢀle drꢀvꢀng; ꢀt ꢀs too
dangerous.
Do not expose the RC-D710 to long perꢀods of dꢀrect sunlꢀght, nor place ꢀt near heatꢀng
applꢀances.
Do not place the RC-D710 ꢀn excessꢀvely dusty, humꢀd, or wet areas, nor on unstable
surfaces.
If an abnormal odor or smoke ꢀs detected comꢀng from the RC-D710 or transceꢀver,
swꢀtch the RC-D710/ transceꢀver power off ꢀmmedꢀately, and contact a Kenwood
servꢀce statꢀon or your dealer.
•
Do not use optꢀons not specꢀfꢀed by Kenwood.
WriTing convenTions FolloWed in This Manual
The wrꢀtꢀng conventꢀons descrꢀbed below have been followed to sꢀmplꢀfy
ꢀnstructꢀons and avoꢀd unnecessary repetꢀtꢀon.
Instruction
Press [KEY].
Action
Momentarꢀly press KEY.
Press [KEY] (1s).
Press and hold KEY for 1 second or longer.
Press KEY1 momentarꢀly, release KEY1, then press
KEY2.
Press [KEY1], [KEY2].
Press the F key to enter Functꢀon mode, then press
KEY to access ꢀts secondary functꢀon.
Press [F], [KEY].
Wꢀth the transceꢀver power OFF, press and hold
KEY whꢀle turnꢀng the transceꢀver power ON.
Press [KEY] + Power ON.
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
conTenTs
PREPARATION................................................................................................ 1
SuPPlIED ACCESSORIES....................................................................... 1
INSTAllATION .......................................................................................... 2
CONNECTION TO PC................................................................................ 3
CONNECTION TO TM-V71........................................................................ 3
CONNECTION TO PG-5J........................................................................... 4
GETTING ACQuAINTED................................................................................. 6
OPERATION PANEl (FRONT) <RC-D710 + TM-V71>............................. 6
OPERATION PANEl (REAR & lEFT) ....................................................... 9
DISPlAY <RC-D710 + TM-V71>.............................................................. 10
OPERATION PANEl (FRONT) <RC-D710 + PG-5J>.............................. 12
BASIC OPERATIONS (RC-D710 + TM-V71)................................................. 14
SWITCHING THE POWER ON/ OFF....................................................... 14
ADJuSTING THE VOluME..................................................................... 14
ADJuSTING THE SQuElCH................................................................... 14
SElECTING A BAND............................................................................... 15
SElECTING DuAl BAND MODE/ SINGlE BAND MODE...................... 16
SElECTING A FREQuENCY BAND........................................................ 17
SElECTING AN OPERATING MODE...................................................... 18
TRANSMITTING....................................................................................... 19
MENu MODE ................................................................................................. 20
MENu ACCESS ....................................................................................... 20
MENu CONFIGuRATION........................................................................ 21
CHARACTER ENTRY .............................................................................. 32
MAINTENANCE ............................................................................................. 34
GENERAl INFORMATION....................................................................... 34
SERVICE.................................................................................................. 34
SERVICE NOTE....................................................................................... 34
ClEANING ............................................................................................... 34
SPECIFICATIONS.......................................................................................... 35
ꢀꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
For a detailed explanation on the operation, refer to the PDF file supplied on the CD-
ROM.
•
Tꢀtles denoted wꢀth <RC-D710 + TM-V71> are operatꢀon explanatꢀons only for
when the RC-D710 ꢀs connected to the TM-V71(A/E). Tꢀtles wꢀthout thꢀs ꢀndꢀcatꢀon
ꢀnclude operatꢀon explanatꢀons for when connectꢀng the RC-D710 to the PG-5J.
•
In the explanatꢀons, the term "transceꢀver" ꢀs generally referrꢀng to the RC-D710 +
TM-V71(A/E).
Operation
File name
conTenTs
00-CONTENTS-E.pdf
oPeraTing Through rePeaTers
<rc-d710 + TM-v71>
01-REPEATER-E.pdf
MeMorY channels <rc-d710 + TM-v71>
PrograMMaBle MeMorY (PM)
scan <rc-d710 + TM-v71>
02-MEMORY CHANNEL-E.pdf
03-PM CHANNEL-E.pdf
04-SCAN-E.pdf
conTinuous Tone coded sQuelch sYsTeM
(cTcss) <rc-d710 + TM-v71>
05-CTCSS-E.pdf
06-DCS-E.pdf
07-DTMF-E.pdf
digiTal coded sQuelch (dcs)
<rc-d710 + TM-v71>
dual Tone MulTi-FreQuencY (dTMF)
<rc-d710 + TM-v71>
echolink® <rc-d710 + TM-v71>
oTher oPeraTions
PackeT oPeraTion
aPrs®
08-EchoLink-E.pdf
09-OTHER OPERATIONS-E.pdf
10-PACKET-E.pdf
11-APRS-E.pdf
reseT
12-RESET-E.pdf
vgs-1 (oPTional) oPeraTion
<rc-d710 + TM-v71>
13-VGS-E.pdf
cross-Band/ locked-Band oPeraTion
<WiTh TM-v71(a) k TYPe onlY>
14-CROSS BAND (K TYPE)-E.pdf
15-WIRELESS (K TYPE)-E.pdf
16-WEATHER ALERT (K TYPE)-E.pdf
17-SKY COMMAND (K TYPE)-E.pdf
Wireless oPeraTion
<WiTh TM-v71(a) k TYPe onlY>
WeaTher alerT
<WiTh TM-v71(a) k TYPe onlY>
skY coMMand
<WiTh TM-v71(a) k TYPe onlY>
Note: Operatꢀons fꢀle ꢀs avaꢀlable ꢀn PDF fꢀle format. To read the fꢀle, you must use Adobe®
Reader®.
ꢀv
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
SuPPlIEd AccESSORIES
Item
Part Number
E30-7639-XX
L79-ꢀ4ꢀ7-XX
Quantity
Modular plug cable (for PANEL jack)
Line filter
ꢀ
2
Cable with a 2.5 mm (ꢀ/ꢀ0") 3-conductor plug (for
GPS jack)
E30-3400-XX
ꢀ
Base stand
• Sheet
J09-0409-XX
Gꢀꢀ-4438-XX
J29-0663-XX
Gꢀ3-2233-XX
J29-0707-XX
Gꢀꢀ-4228-XX
N99-2055-XX
——
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Panel holder
• Cushion
Panel bracket
• Sheet
Screw set
For USA/ CANADA
Warranty Card
For Europe
——
English, French,
B62-2003-XX
B62-2004-XX
T93-0ꢀ34-XX
ꢀ
ꢀ
ꢀ
Spanish, Japanese
Instruction manual
Italian, German, Dutch,
Chinese (traditional)
CD-ROM (For a detailed explanation on the
operation)
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTAllATION
n Mobile Installation
Tapping screw
(4 mm x ꢀ2 mm)
1 Clean and dry the installation location.
Flat washer
Do not install the bracket close to an air bag.
2 Remove the release paper from the base
of the panel bracket, then secure it in
place using the 3 supplied self-tapping
screws.
Panel
bracket
Adhesive tape
•
Allow the panel to set for a while, to ensure
it remains fast. Otherwise, vibrations may
occur.
•
After removing the release paper, it cannot
be reused.
SEMS screw
(M4 x ꢀ0 mm)
3 Attach the panel holder to the panel
bracket using the 2 supplied SEMS
screws.
Panel holder
4 Attach the RC-D7ꢀ0 to the panel holder
so that it locks in place.
n Fixed Station
1 Attach the panel holder to the base
stand using the 2 supplied SEMS
screws.
2 Attach the RC-D7ꢀ0 to the panel
holder so that it locks in place.
SEMS screw (M4
x ꢀ0 mm)
Panel holder
Base stand
2
Download from Www.Somanuals.com. All Manuals Search And Download.
cONNEcTION TO Pc
Use a PG-5G (option) cable when connecting the RC-D7ꢀ0 to a computer D-SUB
terminal.
cOM terminal pin
NC
NC
RXD
GND
CTS
NC
TXD
RTS
PG-5G (option)
To PC 9-pin
D-SUB terminal
PG-5G pin configuration (cross connection)
cONNEcTION TO TM-V71
Connect the RC-D7ꢀ0 to the TM-V7ꢀ using the supplied cable.
TM-V71
Panel jack
Line filter
RC-D710
Modular plug cable
Line filter
Panel jack
Installing the Line Filter
Install the line filter approximately 3 cm from the
connector.
Approx. 3 cm
3
Download from Www.Somanuals.com. All Manuals Search And Download.
cONNEcTION TO PG-5J
When using the RC-D7ꢀ0 with a transceiver other than the TM-V7ꢀ, attach the
RC-D7ꢀ0 to the transceiver using the PG-5J (option).
DATA terminal
To ꢀ3.8 V DC power supply
or ꢀ2 V vehicle battery
Panel jack
PG-5J
Red (+)
cable
Black (—)
cable
DATA terminal
Transceiver
Line filter
DC power cable
6 pin mini-DIN cable
RC-D710
Modular plug cable
Line filter
Panel jack
dATA terminal pin
No. Name
I/O
O
Function
(PG-5J)
TNC data output
2 Vp-p/ 10 kΩ (9600 bps data)
40 mVp-p/ 10 kΩ (1200 bps data)
q
w
e
PKD
GND
PKS
SQC
PR9
GND
NC
PKS
PKD
—
O
GND
Data standby control signal output
Open corrector TX : L level / RX : Hi
impedance
TNC data input (9600 bps)
350 mVp-p to 600 mVp-p/ 10 kΩ
r
t
y
PR9
NC
I
—
I
No connection
Squelch control signal input
SQL Open: H level / Close: L level
SQC
4
Download from Www.Somanuals.com. All Manuals Search And Download.
n Power cable connection (PG-5J)
Fixed Station
In order to use the PG-5J for fixed station operation, you will need a separate
ꢀ3.8 V DC power supply that must be purchased separately.
Note: Do not plug the DC power supply into an AC outlet until you make all connections.
Mobile Installation
Be sure to use a ꢀ2 V vehicle battery that has sufficient current capacity. If the
current to the PG-5J is insufficient, the display may darken during transmission
or the transmit output power may drop excessively. Never connect the
transceiver to a 24 V battery.
Note: Install the PG-5J Interface Box using the included screw set in a location where it will
not interfere with driving.
n Replacing Fuses (PG-5J)
If the fuse blows, determine the cause, then correct the problem. After the
problem is resolved, replace the fuse. If newly installed fuses continue to
blow, disconnect the power cable and contact your authorized Kenwood
dealer or an authorized Kenwood service center for assistance.
Only use fuses of the specified type and rating; otherwise the PG-5J could be damaged.
Fuse
Fuse holder
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING ACQUAINTED
OPERATION PANEl (FRONT) <RC-D710 + TM-V71>
n IN NORMAlMODE
q CALL
Press [CALL] to select the Call channel.
Press [CALL] (1s) to start Call scan.
w VFO
Press [VFO] to enter VFO mode , then rotate the Tuning control to select an
operating frequency.
Press [VFO] (1s) to start VFO scan.
e MR
Press [MR] to enter Memory Channel mode, then rotate the Tuning control to
select a Memory channel.
Press [MR] (1s) to start Memory scan.
r Tuning Control
Rotate to select an operating frequency or Memory channel, change the scan
direction, etc.
Press the Tuning control to enter MHz mode (while in VFO or Call mode) or to
toggle the display between the channel name and frequency (while in Memory
Channel mode).
Press Tuning control (1s) to start MHz scan or Group scan.
t KEY
Press [KEY] to turn the APRS key function ON and OFF.
Note: For APRS key functions, refer to the APRS explanation.
y F
Press [F] to enter Function mode.
Press [F] (1s) to turn the transceiver key lock function ON and OFF.
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
u TONE
Press [TONE] to turn the Tone function ON.
Each time you press [TONE] to toggle the functions as follows: Tone ON >>
CTCSS ON >> DCS ON >> OFF.
i REV
Press [REV] to turn the Reverse function ON or OFF.
Press [REV] (1s) to turn the Automatic Simplex Checker ON.
o LOW
Press [LOW] to toggle the transmit output power as follows: High Power (with
TM-Vꢁ1(A/E) K, E types only) –> Middle Power –> Low Power.
! PF1
Press [PF1] to activate its programmable function.
! PF2
Press [PF2] to activate its programmable function.
! BAND SEL (VOL) Control
Rotate the [BAND SEL] control to adjust the speaker volume.
Press the left [BAND SEL] to select the A band. Press the right [BAND SEL]
to select the B band.
Press [BAND SEL] (1s) to toggle between single and dual-band mode.
! SQL Control
Rotate the [SQL] control to adjust the squelch level. Clockwise opens the
squelch and counterclockwise tightens the squelch.
! TNC
Press [TNC] to turn built-in TNC ON and the APRS (or NAVITRA) mode ON.
Each time you press [TNC], the mode toggles as follows: APRS (or
NAVITRA) mode ON >> PACKET mode ON >> TNC OFF.
•
•
When the built-in TNC turns on, “OPENING TNC” appears on the display.
When “OPENING TNC” appears on the display, the mode cannot be changed.
! PM
Press [PM] to enters the PM (Programmable Memory) channel selection
mode.
!
Press [ ] to turn the transceiver power ON and OFF.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
n IN FUNCTION MODE
q C.IN
Press [C.IN] to store the current operating frequency to the Call channel.
w M>V
Press [M>V] to copy the current Memory channel or Call channel to the VFO
(memory shift).
e M.IN
Select a Memory channel, then press [M.IN] to store the current operating
frequency in the Memory channel.
r Tuning Control
Press the Tuning control to enter Menu mode.
t F OFF
Press [F OFF] to return Normal mode.
y T.SEL
While Tone, CTCSS, or DCS is ON, press [T.SEL] to enter CTCSS or DCS
setup mode.
u SHIFT
Press [SHIFT] to enter Offset Direction selection mode. Each time you press
[SHIFT], the offset direction toggles as follows:
plus (+) direction –> minus (–) direction –> –ꢁ.ꢀ MHz (with TM-Vꢁ1(E) E type
only) –> OFF.
i MUTE
Press [MUTE] to turn the Mute function ON or OFF.
o VISUAL
Press [VISUAL] to turn the Visual Scan function ON and OFF.
! BAND SEL (VOL) Control
Rotate the [BAND SEL] control to adjust the speaker volume.
Press [BAND SEL] to select a frequency band.
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
! SQL Control
Rotate the [SQL] control to adjust the squelch level. Clockwise opens the
squelch and counterclockwise tightens the squelch.
! DX
Press [DX] to turn the DX PacketClusters Monitor ON and OFF.
! P.IN
Press [P.IN] to enter PM Channel registration mode.
!
Press [ ] to turn the transceiver power ON and OFF.
OPERATION PANEl (REAR & lEFT)
q GPS
Connect the GPS receiver or the Weather Station to this jack with using
supplied cable with a 2.5 mm (1/10") 3-conductor plug.
w COM
This terminal is for connecting to a PC. Use a PG-5G (option) cable when
connecting the built-in TNC to a computer D-SUB terminal.
e Panel jack
Connect the TM-Vꢁ1 or PG-5J to this jack using the supplied Modular plug
cable.
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
DIsPlAy <RC-D710 + TM-V71>
<A Band>
<B Band>
Indicator
Description
Clock display (Setting Time: Menu 525)
Appears when there is a transmission band available.
Blinks when the cross-band repeater is ON (with TM-Vꢁ1(A) K
type only).
Appears when there is an operation band available.
Blinks when the wireless remote control is ON (with TM-
Vꢁ1(A) K type only).
Appears when the Tone function is ON.
Appears when the CTCSS function is ON.
Appears when the DCS function is ON.
Appears when the Shift function is set to plus.
Appears when the Shift function is set to minus.
Appears when the Reverse function is ON.
Appears when the ASC function is ON.
Blinks when the ASC function is performing an OK check.
Appears while in AM mode.
Appears while in FM mode.
Appears while in Narrow FM mode.
Appears when the selected channel is registered while in
Memory Input mode.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Indicator
Description
Displays the Memory channel and Menu number.
Appears when the Memory Channel Lockout function is ON.
Appears while using High output power.
Blinks when the temperature protection circuit (transmit power
save) turns on. (with TM-Vꢁ1(A/E) K, E types only)
Appears while using Middle output power.
Blinks when the temperature protection circuit (transmit power
save) turns on.
Appears while using Low output power.
Displays the operating frequency.
Appears when receiving a busy signal.
Performs as an S meter when receiving a signal and displays
the selected power level while transmitting.
Appears while transmitting.
Appears while using the External data band.
Appears while using the Internal data band.
Appears when the data terminal is set as ꢃꢀ00 (bps).
Appears when mute function is ON.
Appears while making a continuous recording.
Appears while in EchoLink Sysop mode.
Appears when the Key Lock function is ON.
Displays the PM channel number.
Appears when Weather Alert is ON.
Blinks when receiving a signal. (with TM-Vꢁ1(A) K type only)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION PANEl (FRONT) <RC-D710 + PG-5J>
n IN NORMAlMODE
q Tuning Control
Press [F], then press the Tuning control to enter Menu mode.
w F
Press [F] to enter Function mode.
e TNC
Each time you press [TNC], the mode toggles between APRS (or NAVITRA)
mode ON and PACKET mode ON.
•
When “OPENING TNC” appears on the display, the mode cannot be changed.
r PM
Press [PM] to enters the PM (Programmable Memory) channel selection
mode.
t
Press [ ] to turn the RC-Dꢁ10 power ON and OFF.
Note: For [MSG], [LIST], [BCON], [POS], and [P.MON] keys, refer to the APRS explanation.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
n IN FUNCTION MODE
q Tuning Control
Press the Tuning control to enter Menu mode.
w F OFF
Press [F OFF] to return Normal mode.
e DX
Press [DX] to turn the DX PacketClusters Monitor ON and OFF.
r P.IN
Press [P.IN] to enter PM Channel registration mode.
t
Press [ ] to turn the RC-Dꢁ10 power ON and OFF.
Note: For [WXi] key, refer to the APRS explanation.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS (RC-D710 + TM-V71)
SwITChINg ThE POwER ON/ OFF
Press the [ ] switch to switch the transceiver ON.
Press the [ ] switch again to switch the transceiver OFF.
ADjuSTINg ThE VOluME
Rotate the [BAND SEL] (VOL) control of your selected band clockwise to
increase the volume and counterclockwise to decrease the volume.
ADjuSTINg ThE SQuElCh
Rotate the [SQL] control of your selected band, when no signals are present, and
select the squelch level at which the background noise is just eliminated.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SElECTINg A BAND
Press the left [BAND SEL] control to select band A and the right [BAND SEL]
control to select band B.
•
The
icon appears at the top of the band on which you are operating and the
icon appears at the top of the band on which you are currently set to transmit.
Band A (left [BAND SEL] control):
Band B (right [BAND SEL] control):
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Pressing [PF2] allows you to switch the operating band between bands A and B,
while maintaining the original band as the transmit band.
Band A is the transmit band and band B is the operating band:
Band A is both the transmit and operating band:
SElECTINg DuAl BAND MODE/ SINglE BAND MODE
You can switch the transceiver between dual band operation and single band
operation by pressing [BAND SEL] (1s) of your selected band.
Dual band mode:
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Single band mode (band A only):
Note: You can also turn the center partition bar display off {Menu No. 527}.
SElECTINg A FREQuENCy BAND
You can change the default frequency bands for bands A and B.
1 Select band A or B by pressing the [BAND SEL] control or [PF2].
2 Press [F], [BAND SEL] of your selected band.
•
Each time you press [F], [BAND SEL], you cycle to the next frequency band.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SElECTINg AN OPERATINg MODE
There are 3 operating modes available to choose from: VFO mode, Memory
Channel mode, and Call Channel mode.
■ VFO Mode
VFO mode allows you to manually change the operating frequency.
1 Press [VFO] to enter VFO mode.
2 Rotate the Tuning control to select your desired operating frequency.
■ Memory Channel Mode
Memory Channel mode allows you to quickly select a frequently used
frequency and related data which you have saved in the transceiver memory.
1 Press [MR] to enter Memory Channel mode.
2 Rotate the Tuning control to select your desired Memory channel.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Call Channel Mode
Call Channel mode allows you to quickly select a preset channel to allow
immediate calls on that frequency. The Call channel can be conveniently used
as an emergency channel within your group.
1 Select your desired band (A or B).
2 Press [CALL] to enter Call Channel mode.
•
The
icon appears on the display.
3 Press [CALL] again to return to your previous operating frequency.
TRANSMITTINg
1 Select your desired band and frequency/channel.
2 Press and hold the microphone [PTT] switch and speak into the microphone to
transmit.
•
•
The
transmit band. The RF power meter shows the relative transmit output power.
The icon(s) appear on the display, depending on what output power you
have selected.
icon and the RF power meter appear on the display for the selected
/
/
3 When you finish speaking, release the [PTT] switch.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU MODE
Many functions on this RC-D710 are selected or configured through the Menu
instead of physical controls. Once you become familiar with the Menu system,
you will appreciate the versatility it offers.
MENU AccEss
1 Press [F], Tuning control to access the Menu.
•
The setup category name appears on the display.
<RC-D710 + TM-V71>
<RC-D710 + PG-5J>
2 Rotate the Tuning control to select your desired setup category.
3 Press the Tuning control to set up the current category.
•
The Menu name and number appears on the display.
4 Rotate the Tuning control to select your desired Menu.
5 Press the Tuning control to set up the current Menu.
6 Rotate the Tuning control to select your desired value for the selected Menu.
7 Press the Tuning control to set the selected value.
8 Repeat steps 2 to 7 to set up additional Menus.
•
•
Press [ESC] at any time to exit Menu mode.
Press [BACK] at any time to cancel the Menu setup and return to the Menu
selection.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU cONfigUrAtiON
AUDIO <RC-D710 + TM-V71>
Description
Menu
Display
No.
Setting
Values
Default
Setting
000
KEY BEEP
Beep sound
OFF/ ON
ON
LEVEL 1 ~
LEVEL 7
001
BEEP VOLUME
Beep volume level
LEVEL 5
External speaker output
mode
MODE 1/
MODE 2
002
EXT.SPEAKER
ANNOUNCE
MODE 1
AUTO
OFF/ AUTO/
MANUAL
003 1
004 1
005 1
006 1
Voice announcement mode
ANNOUNCE
LANGUAGE
Voice announcement
language
ENGLISH/
JAPANESE
ENGLISH
LEVEL 5
ANNOUNCE
VOLUME
Voice announcement
volume
LEVEL 1 ~
LEVEL 7
Voice announcement
speed
SPEED 0 ~
SPEED 4
ANNOUNCE SPEED
SPEED 1
OFF
007 1 PLAYBACK REPEAT Recording playback repeat OFF/ ON
PLAYBACK
INTERVAL
Playback repeat interval
time
008 1
0 ~ 60 s
10 s
CONTINUOUS
RECORDING
009 1
Continuous recording
OFF/ ON
OFF
AUDIO <RC-D710 + PG-5J>
Description
Menu
No.
Setting
Values
Default
Setting
Display
000
KEY BEEP
Beep sound
OFF/ ON
ON
LEVEL 1 ~
LEVEL 3
001
BEEP VOLUME
Beep volume level
LEVEL 2
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TX/RX <RC-D710 + TM-V71>
Description
Menu
No.
Setting
Values
Default
Setting
Display
Varies with
the selected
frequency band
PROGRAMMABLE
VFO
100
101
102
Programmable VFO setup
Step frequency
–
–
–
Varies with
the selected
frequency band
STEP
Varies with
the selected
frequency band
Modulation/demodulation
mode
MODULATION
103
104
VHF AIP
UHF AIP
VHF band AIP
UHF band AIP
OFF/ ON
OFF/ ON
OFF
OFF
105
106
S-METER SQUELCH S-meter squelch
OFF/ ON
OFF
OFF
S-METER SQL
HANGUP TIME
S-meter squelch hang up
OFF/ 125/ 250/
500 ms
time
OFF/ 125/ 250/
500/ 750/ 1000
ms
MUTE HANGUP
TIME
107
Mute hang up time setup
OFF
108
109
BEAT SHIFT
TOT
Beat shift
OFF/ ON
3/ 5/ 10 min
OFF/ ON
OFF
10 min
OFF
Time-out timer
110 2
WEATHER ALERT Weather alert
MEMORY <RC-D710 + TM-V71>
Menu
No.
Setting
Values
Default
Setting
Display
Description
Up to 8
characters
200
MEMORY NAME
Memory name setup
–
Memory channel recall
method
ALL BANDS/
CURRENT
201
202
203
RECALL METHOD
LOCKOUT
ALL BANDS
Memory channel lockout
OFF/ ON
OFF
–
Memory group link
registration
Up to 10 digits
(0 ~ 9)
GROUP LINK
Up to 8
characters
for EchoLink
memory name
204
205
EchoLink MEMORY EchoLink memory setting
–
Up to 8 digits
for DTMF code
EchoLink memory
EchoLink SPEED
FAST/ SLOW
FAST
transmission speed
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DTMF <RC-D710 + TM-V71>
Description
Menu
No.
Setting
Values
Default
Setting
Display
300
DTMF HOLD
DTMF transmission hold
OFF/ ON
OFF
Up to 8
characters for
DTMF memory
name
301
DTMF MEMORY
DTMF SPEED
DTMF memory
–
Up to 16 digits
for DTMF code
DTMF memory
transmission speed
302
FAST/ SLOW
FAST
100/ 250/ 500/
750/ 1000/
1500/ 2000 ms
303
304
DTMF PAUSE
DTMF pause code time
DTMF key lock
500 ms
OFF
DTMF KEY LOCK
OFF/ ON
REPEATER <RC-D710 + TM-V71>
Setting
Values
Menu
No.
Default
Setting
Display
Description
See
explanation
400
401 3
402
OFFSET FREQUENCY Offset frequency
–
AUTO REPEATER
Auto Repeater Offset
OFFSET
OFF/ ON
ON
OFF
Transmission hold when
1750 TX HOLD
OFF/ ON
transmitting a 1750 Hz tone
CROSS BAND/
LOCKED TX:
A-BAND/
LOCKED TX:
B-BAND
403 2
REPEATER MODE
Repeater mode
CROSS BAND
404 2
405 2
REPEATER TX HOLD Repeater transmission hold ON/ OFF
OFF
–
Up to 12
REPEATER ID
Repeater ID registration
Repeater ID transmission
characters
OFF/ MORSE/
VOICE
406 2
REPEATER ID TX
OFF
23
Download from Www.Somanuals.com. All Manuals Search And Download.
AUX <RC-D710 + TM-V71>
Description
Menu
No.
Setting
Values
Default
Setting
Display
POWER ON
MESSAGE
Up to 8
characters
500
Power on message setup
Display brightness
HELLO !!
OFF/ LEVEL 1
~ LEVEL 8
501
502
503
BRIGHTNESS
LEVEL 8
OFF
AUTO BRIGHTNESS Display auto brightness
BACKLIGHT COLOR Backlight color
OFF/ ON
AMBER/
GREEN
AMBER
LEVEL 1 ~
LEVEL 16
504
505
CONTRAST
Display contrast
LEVEL 8
DISPLAY REVERSE
MODE
POSITIVE/
NEGATIVE
Display reverse mode
POSITIVE
WX CH
(K type)
PF1 key programmable
function value
See
explanation
507
PANEL PF1
FRQ.BAND
(E/ M4 types)
PF2 key programmable
function value
See
explanation
508
509
PANEL PF2
CTRL
A/B
Microphone PF1 key
programmable function
value
See
explanation
MIC PF1(PF)
Microphone PF2 key
programmable function
value
See
explanation
510
511
MIC PF2(MR)
MIC PF3(VFO)
MR
Microphone PF3 key
programmable function
value
See
explanation
VFO
CALL
(K/ M4 types)
Microphone PF4 key
programmable function
value
See
explanation
512
MIC PF4(CALL)
1750
(E type)
513
514
MIC KEY LOCK
SCAN RESUME
Microphone key lock
Scan resume method
OFF/ ON
OFF
TIME/
CARRIER/
SEEK
TIME
MODE 1: 31ch/
MODE 2 : 61ch/
MODE 3 : 91ch/
MODE 4 : 181ch
Number of Channels for
Visual Scan
515
516
VISUAL SCAN
APO
MODE 2 : 61ch
OFF
OFF/ 30/ 60/
90/ 120/ 180
(minutes)
Auto Power Off time
24
Download from Www.Somanuals.com. All Manuals Search And Download.
AUX <RC-D710 + TM-V71>
Description
Menu
No.
Setting
Values
Default
Setting
Display
A-BAND/
B-BAND/
External TNC data band
type
TX:A-BAND
RX:B-BAND/
RX:A-BAND
TX:B-BAND
517
EXT. DATA BAND
EXT. DATA SPEED
A-BAND
External TNC data
communications speed
518
519
1200/ 9600 bps
1200 bps
9600 bps
9600/ 19200/
38400/ 57600
bps
PC PORT
BAUDRATE
PC terminal baud rate
speed
OFF/ BUSY/
SQL/ TX/
BUSY or TX/
SQL or TX
520
SQC SOURCE
SQC output type
BUSY or TX
521
AUTO PM STORE
REMOTE ID
Automatic PM entry
OFF/ ON
ON
Personal Identification
Number
522 2
000 ~ 999
000
REMOTE ANSWER
BACK
523 2
524
525
526
527
Answer back
Date
OFF/ ON
ON
–
See
explanation
DATE
TIME
See
explanation
Clock time
–
UTC + 14:00 ~
UTC − 14:00
TIME ZONE
Time zone
UTC
ON
DISPLAY
PARTITION BAR
Display partition bar
OFF/ ON
9600/ 19200/
38400/ 57600
bps
COM PORT
BAUDRATE
COM terminal baud rate
speed
528
529
9600 bps
A-BAND
A-BAND/
B-BAND/
TX:A-BAND
RX:B-BAND/
RX:A-BAND
TX:B-BAND
INT. DATA BAND
(PACKET)
Internal TNC data band
(PACKET)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
AUX <RC-D710 + PG-5J>
Description
Menu
No.
Setting
Values
Default
Setting
Display
POWER ON
MESSAGE
Up to 8
characters
500
Power on message setup
Display brightness
HELLO !!
OFF/ LEVEL 1
~ LEVEL 8
501
502
503
BRIGHTNESS
LEVEL 8
OFF
AUTO BRIGHTNESS Display auto brightness
BACKLIGHT COLOR Backlight color
OFF/ ON
AMBER/
GREEN
AMBER
LEVEL 1 ~
LEVEL 16
504
CONTRAST
Display contrast
LEVEL 8
DISPLAY REVERSE
MODE
POSITIVE/
NEGATIVE
505
521
524
Display reverse mode
Automatic PM entry
Date
POSITIVE
AUTO PM STORE
DATE
OFF/ ON
ON
–
See
explanation
See
explanation
525
526
TIME
Clock time
Time zone
–
UTC + 14:00 ~
UTC − 14:00
TIME ZONE
UTC
9600/ 19200/
38400/ 57600
bps
COM PORT
BAUDRATE
COM terminal baud rate
speed
528
9600 bps
26
Download from Www.Somanuals.com. All Manuals Search And Download.
APRS
Menu
No.
Setting
Values
Default
Setting
Display
Description
BASIC SETTING
Up to 9
characters
MY CALLSIGN
BEACON TYPE
Call sign entry
Beacon type
NOCALL
APRS
600
APRS/
NAVITRA
INTERNAL TNC
A-BAND/
B-BAND/
DATA BAND
*RC-D710 +
TM-V71
TX:A-BAND
RX:B-BAND/
RX:A-BAND
TX:B-BAND
Data band type
A-BAND
1200 bps
Data communications
speed
DATA SPEED
DCD SENSE
1200/ 9600 bps
D or RxD
BAND/
BOTH BAND/
IGNORE DCD
601
D or RxD
BAND
*RC-D710 +
TM-V71
DCD sense type
ON/
IGNORE DCD
ON
*RC-D710 +
PG-5J
100/ 150/ 200/
300/ 400/ 500/
750/ 1000 ms
TX DELAY
TX delay time
200 ms
GPS PORT
2400/ 4800/
9600 bps
BAUD RATE
INPUT
Baud rate speed
4800 bps
OFF
OFF/ GPS/
WEATHER(Da
vis)/ WEATHER
(PeetBros)
602
GPS data input type
OFF/
OUTPUT
GPS data output type
WAYPOINT/
DGPS
OFF
WAYPOINT
NMEA/
FORMAT
Way point format
MAGELLAN/
KENWOOD
NMEA
603
6-CHAR ~ 9-
CHAR
NAME
Way point name
6-CHAR
ALL
ALL/ LOCAL/
FILTERED
OUTPUT
Way point output type
27
Download from Www.Somanuals.com. All Manuals Search And Download.
APRS
Menu
No.
Setting
Values
Default
Setting
Display
Description
COM PORT
COM port output
MY POSITION
604
OUTPUT
OFF/ ON
OFF
See
explanation
−
−
−
NAME
Name entry
605
See
explanation
LATITUDE
LONGITUDE
Latitude entry
Longitude entry
See
explanation
BEACON INFORMATION
SPEED
Speed information setup
Altitude information setup
OFF/ ON
OFF/ ON
ON
ON
606
ALTITUDE
POSITION
AMBIGUITY
OFF/ 1-DIGIT ~
4-DIGIT
Position ambiguity mode
OFF
POSITION COMMENT
607
608
POSITION
COMMENT
See
explanation
Position comment
STATUS TEXT
Status text
Off Duty
See
explanation
−
TEXT
TX RATE
Status text TX rate
OFF/ 1/1 ~ 1/8
1/1
PACKET FILTER
See
explanation
POSITION LIMIT
TYPE
Position limit
OFF
609
610
WHEATHER/
DIGI/ MOBILE/
OBJECT/
Packet filter type
Checked all
NAVITRA/
OTHERS
STATION ICON
See
explanation
W
STATION ICON
METHOD
Station icon
(KENWOOD icon)
BEACON TX ALGORITHM
MANUAL/ PTT/
Method
MANUAL
AUTO
0.2/ 0.5/ 1/ 3/ 5/
10/ 20/ 30 min
611
INITIAL INTERVAL Initial interval time
DECAY ALGORITHM Decay algorithm
3 min
ON
OFF/ ON
OFF/ ON
PROPORTIONAL
Proportional pathing
PATHING
ON
28
Download from Www.Somanuals.com. All Manuals Search And Download.
APRS
Menu
No.
Setting
Values
Default
Setting
Display
Description
PACKET PATH
Packet path type
NETWORK
612
TYPE
See explanation
613
Up to 9
characters
NETWORK
Network
APK102
VOICE ALERT *RC-D710 + TM-V71
VOICE ALERT
Voice alert
OFF/ ON
OFF
614
615
See
explanation
CTCSS FREQUENCY CTCSS frequency
100.0 Hz
WEATHER STATION
TX
Weather TX
OFF/ ON
OFF
TX INTERVAL
Weather TX interval time
5/ 10/ 30 min
5 min
DIGIPEAT (MY CALL)
616
617
DIGIPEAT
TIME
Digipeat
OFF/ ON
OFF
UI CHECK
UIDIGI
UI check time
0 ~ 250 sec
28 sec
UIDIGI
618
619
UIDIGI
See explanation
See explanation
ALIASES
UIFLOOD
UIFLOOD
ALIASES
UIFLOOD
SUBSTITUTION
UITRACE
UITRACE
ALIASES
620
621
UITRACE
See explanation
See explanation
USER PHRASES
USER PHRASES
User phrases
AUTO MESSAGE REPLY
REPLY
TEXT
Reply message
OFF/ ON
OFF
Up to 50
characters
622
−
Auto message reply text
Up to 9
characters
REPLY TO
Reply to
29
Download from Www.Somanuals.com. All Manuals Search And Download.
APRS
Menu
No.
Setting
Values
Default
Setting
Display
Description
GROUP FILTERING
Up to 59
ALL, QST, CQ,
KWD
MESSAGE
BLN
Message group
623
characters
Up to 29
characters
−
BLN group
SOUND
OFF/ MESSAG
E ONLY/ MINE/
ALL NEW/ ALL
RX BEEP
RX Beep
ALL
−
624
Up to 9
characters
SPECIAL CALL
Special call
APRS voice
APRS VOICE
*RC-D710 +
TM-V71
OFF/ ON
ON
INTERRUPT DISPLAY
OFF/ HALF/
ENTIRE
*RC-D710 +
TM-V71
ENTIRE
ENTIRE
DISPLAY AREA
Display area
625
OFF/ ENTIRE
*RC-D710
+PG-5J
AUTO BRIGHTNESS Auto brightness
CHANGE COLOR
Change color
DISPLAY UNIT 1
OFF/ ON
OFF/ ON
ON
ON
mi/h mile/ Km/h
mile/ Knots nm
SPEED, DISTANCE Speed/ distance
mi/h mile
626
ALTITUDE, RAIN
TEMPERATURE
Altitude/ rain
Temperature
feet/inch/ m/nm
°F/ °C
feet/inch
°F
DISPLAY UNIT 2
dd°mm. mm’/
dd°mm’ ss. s”
POSITION
Position format
Grid format
dd°mm. mm’
627
628
MAIDENHEAD
GRID/ SAR
GRID (CONV)/
SAR GRID
(CELL)
MAIDENHEAD
GRID
GRID FORMAT
NAVITRA GROUP
GROUP MODE
GROUP CODE
Group mode
Group code
OFF/ ON
OFF
000
3 characters
30
Download from Www.Somanuals.com. All Manuals Search And Download.
APRS
Menu
No.
Setting
Values
Default
Setting
Display
Description
NAVITRA MESSAGE
629
Up to 20
−
MESSAGE
Message
characters
SKY CMD (RC-D710 + TM-V71)
Menu
No.
Setting
Values
Default
Setting
Display
Description
COMMANDER
CALLSIGN
Up to 9
characters
700 2
701 2
702 2
Commander call sign
Transporter call sign
NOCALL
NOCALL
88.5Hz
TRANSPORTER
CALLSIGN
Up to 9
characters
See
explanation
TONE FREQUENCY Tone frequency
OFF/
COMMANDER/
TRANSPORTER
703 2
SKY COMMAND
SKY command
OFF
AUX 2 (RC-D710 + TM-V71)
Description
Menu
No.
Setting
Values
Default
Setting
Display
POWER ON
PASSWORD
998
Power on password
Reset
OFF/ ON
OFF
VFO RESET/
PARTIAL
RESET/
PM RESET/
FULL RESET
999
RESET
VFO RESET
AUX 2 (RC-D710 + PG-5J)
Description
Menu
No.
Setting
Values
Default
Setting
Display
PM RESET/
FULL RESET
999
RESET
Reset
PM RESET
1
Available only when the optional VGS-1 unit is installed in the TM-V71(A/E).
Available only for TM-V71(A) K type models.
2
3
Available only for TM-V71(A/E) K and E types models.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
chArActEr ENtry
Certain menus require you to enter characters, such as the power on message
and memory names. When character entry is required, a cursor will appear on
the display.
1 Press the Tuning control.
•
The cursor will blink.
2 Rotate the Tuning control to select your desired character.
3 Press the Tuning control to set the selected character.
•
The cursor will move to the next digit.
•
•
•
•
You can move the cursor to the left or right by pressing [←] or [→].
You can insert one space by pressing [SPACE].
You can insert a character by pressing [INS].
You can delete the selected character by pressing [CLR].
4 Repeat steps 2 and 3 to enter the remaining characters.
•
•
Press [ESC] at any time to exit Menu mode.
Press [BACK] at any time to cancel the Menu setup and return to the Menu
selection.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
n Microphone Keypad character Entry (with tM-V71)
The microphone keys can also be used to enter characters. Refer to the table
below for characters corresponding to microphone keys.
Character Display (with
each press of the key)
Character Display (with
each press of the key)
Key
Key
1
2
3
4
5
6
Q
A
D
G
J
Z
B
E
H
K
N
1
C
F
I
7
8
9
0
P
T
R
U
X
S
V
Y
0
7
8
9
2
3
4
5
6
W
(space)
L
O
Not used
M
#
–
/
@
For a memory name, status text, and message:
Key
1
Character Display (with each press of the key)
q
z
b
e
h
k
n
r
1
c
f
Q
2
3
4
5
6
7
8
9
Z
A
D
G
J
2
a
B
E
H
K
N
R
U
X
C
3
d
F
I
4
g
i
5
j
l
L
6
m
o
s
v
y
M
P
T
O
S
V
Y
7
p
8
t
w
u
x
0
9
W
0
(space)
Not used
?
&
;
!
#
:
’
%
”
.
(
,
–
<
/
#
)
>
@
The microphone [A] ~ [D] keys have special functions assigned to them:
[A]: Functions the same as [CLR]
[B]: Functions the same as [←]
[C]: Functions the same as [→]
[D]: Functions the same as the Tuning control
33
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
GENERAL INFORMATION
This product has been factory aligned and tested to specification before shipment.
Attempting service or alignment without factory authorization can void the product
warranty.
SERVICE
When returning this product to your dealer or service center for repair, pack it in
its original box and packing material. Include a full description of the problem(s)
experienced. Include your telephone number along with your name and address
in case the service technician needs to contact you; if available, also include your
fax number and e-mail address. Don’t return accessory items unless you feel
they are directly related to the service problem.
You may return this product for service to the authorized Kenwood dealer from
whom you purchased it, or any authorized Kenwood service center. Please do
not send subassemblies or printed circuit boards; send the complete product. A
copy of the service report will be returned with the product.
SERVICE NOTE
If you desire to correspond on a technical or operational problem, please make
your note legible, short, complete, and to the point. Help us help you by providing
the following:
•
•
•
Model and serial number of equipment
Question or problem you are having
Other equipment in your station pertaining to the problem
Do not pack the equipment in crushed newspapers for shipment! Extensive damage may result
during rough handling or shipping.
Note:
u
u
Record the date of purchase, serial number and dealer from whom this product was purchased.
For your own information, retain a written record of any maintenance performed on this
product.
u
When claiming warranty service, please include a photocopy of the bill of sale or other
proof-of-purchase showing the date of sale.
CLEANING
To clean the case of this product, use a neutral detergent (no strong chemicals)
and a damp cloth.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Specifications are subject to change without notice due to advancements in
technology.
Supply voltage
10 V DC (9 ~ 11 V DC) <Negative ground>
Less than 450 mA
Current
Operating temperature range
–20°C ~ +60°C (–4°F ~ +140°F)
155 x 70 x 38 mm (6.10" x 2.76" x 1.50")
156 x 71 x 56 mm (6.14" x 2.80" x 2.21")
300 g (10.6 oz.)
Without projections
With projections
Dimensions
(W x H x D)
Weight (approx.)
To download the MCP-2A software, go to:
Note: This URL may change without notice.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
|