Kenwood Car Satellite TV System KVC 1000 User Manual

6.5-Inch WIDE TELEVISION

KVC-1000

INSTRUCTION MANUAL

00/12 11 10 9 8 7 6 5 4 3 2 1 99/12 11 10 9 8 7 6

Download from Www.Somanuals.com. All Manuals Search And Download.

Egnlish

Cancelling the PTY Search Screen . . . . . . . . . . .21

Disc Repeat Function . . . . . . . . . . . . . . . . . . . .24

Track Scan Function . . . . . . . . . . . . . . . . . . . . . .24

Disc Scan Function . . . . . . . . . . . . . . . . . . . . . .24

Track Random Play Function . . . . . . . . . . . . . . .25

Magazine Random Play Function . . . . . . . . . . .25

Switching to the Disc Changer Control

Screen (Shift) . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Switching to the Next Source Mode . . . . . . . . .25

Switching to the Previous Source Mode . . . . . .25

Switching to the Menu Screen . . . . . . . . . . . . .25

Disc Changer Control Screen (Shift)

Selecting the Name or Title Display for Discs . .26

To Scroll Manually . . . . . . . . . . . . . . . . . . . . . . .26

Selecting the Time Display for CDs . . . . . . . . . .26

Switching to the Disc List Screen . . . . . . . . . . .26

Switching to the Name Set Screen . . . . . . . . . .26

Returning to the Disc Changer Control

DAB Tuner Control Function

DAB Setup Screen

Automatic Switching from DAB to RDS . . . . . .22

Dynamic Range Control . . . . . . . . . . . . . . . . . . .22

Restricting the DAB Region . . . . . . . . . . . . . . . .22

DAB Control Screen (Main)

Switching the Ensemble . . . . . . . . . . . . . . . . . .22

Selecting the Type of Programme to be

Received . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Service Preset Memory . . . . . . . . . . . . . . . . . . .22

Turning the DAB PTY Search On/Off . . . . . . . . .22

Switching the DAB Control Screen (Shift) . . . . .22

Switching to the Next Source Mode . . . . . . . . .22

Switching to the Previous Source Mode . . . . . .22

Switching to the Menu Screen . . . . . . . . . . . . .22

DAB Control Screen (Shift)

Screen (Main) . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Disc List Screen

Changing to the Disc List . . . . . . . . . . . . . . . . . .26

Selecting the Disc . . . . . . . . . . . . . . . . . . . . . . .26

Switching the Display for Discs . . . . . . . . . . . . .26

Returning to the Source Control Screen . . . . . .26

Selecting the Seek Mode . . . . . . . . . . . . . . . . .23

Auto Memory Entry . . . . . . . . . . . . . . . . . . . . . .23

Dual Channel Audio Switching . . . . . . . . . . . . . .23

Primary/Secondary Switching . . . . . . . . . . . . . .23

Presetting the Volume Level for Traffic

Information/News . . . . . . . . . . . . . . . . . . . . . . .23

Returning to the DAB Control Screen (Main) . . .23

Name Set Function

Name Set Screen

Disc Changer Control Function

Station Name Preset (SNPS)/Disc Name Preset

Disc Changer Control Screen (Main)

(DNPS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Pausing and Restarting CD Play . . . . . . . . . . . .24

Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Fast Forwarding and Reversing Disc Play . . . . .24

Disc Search . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Track Repeat Function . . . . . . . . . . . . . . . . . . . .24

Remote Control Function . . . . . . . . . . . . . . .28

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Troubleshooting Guide . . . . . . . . . . . . . . . . . .34

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .36

The control screens shown in this manual are for explanation purposes only.

The actual screens and design differ.

The TV must be set according to the TV Area Setting Screen (see page 10).

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety Precautions

Mask key

2 WARNING

If you have transmitted the Mask Key's signal once to

the unit in advance, you will have to transmit it once

again if the unit has been removed from the battery.

If this procedure is not carried out, the control panel of

the unit will re-open even with your vehicle's ignition

turned off.

To prevent injury and/or fire, take the

following precautions:

• Ensure that the unit is securely installed. Otherwise

it may fly out of place during collisions and other

jolts.

Egnlish

• When extending the ignition, battery or ground

cables, make sure to use automotive-grade cables or

2 CAUTION

other cables with an area of 0.75mm (AWG18) or

Do not loose the "Mask Key".

more to prevent cable deterioration and damage to

the cable coating.

If power is disconnected from the unit, correct operation

can only be restored by the "Mask Key's" signal.

The "Mask Key" will also be required for service repair.

• To prevent short circuits, never put or leave any

metallic objects (e.g., coins or metal tools) inside the

unit.

NOTE

If you send products in for repair that include a mask

key, make sure to present the unit together with the

mask key.

• If the unit starts to emit smoke or strange smells,

turn off the power immediately and consult your

Kenwood dealer.

• Do not touch the liquid crystal fluid if the LCD is

damaged or broken due to shock. The liquid crystal

fluid may be dangerous to your health or even fatal.

If the liquid crystal fluid from the LCD contacts your

body or clothing, wash it off with soap immediately.

Cleaning the Unit

If the front panel gets dirty, turn off the power and

wipe the panel with a dry silicon cloth or soft cloth.

2 CAUTION

Do not wipe the panel with a stiff cloth or a cloth

dampened by volatile solvents such as paint thinner

and alcohol. They can scratch the surface of the panel

and/or remove the indicator letters.

Screen brightness during low temperatures

When the temperature of the unit falls such as during

winter, the liquid crystal panel's screen will become

darker than usual. Normal brightness will return after

using the monitor for a whilst.

2 CAUTION

To prevent damage to the machine, take the

following precautions:

• Make sure to ground the unit to a negative 12V DC

power supply.

• Do not open the top or bottom covers of the unit.

• Do not install the unit in a spot exposed to direct

sunlight or excessive heat or humidity. Also avoid

places with too much dust or the possibility of water

splashing.

Loading and Replacing the Batteries for the

Remote

• Do not subject the faceplate to excessive shock, as

it is a piece of precision equipment.

2 CAUTION

• When replacing a fuse, only use a new one with the

prescribed rating. Using a fuse with the wrong rating

may cause your unit to malfunction.

Do not set the remote on hot places such as above

the dashboard.

Loading and Replacing the Batteries

1. Use two "AAA" batteries.

• To prevent short circuits when replacing a fuse, first

disconnect the wiring harness.

Slide the cover while pressing downwards to

remove it as illustrated.

• Do not use any screws except for the ones provided.

The use of improper screws might result in damage

to the main unit.

• You cannot view video pictures whilst the vehicle is

moving. To enjoy TV/video pictures, find a safe place

to park and engage the parking brake.

2. Insert the batteries with the ª and · poles

aligned properly following the illustration inside the

case.

NOTE

• If you experience problems during installation,

consult your Kenwood dealer.

• If the unit does not seem to be working right, try

pressing the reset button first. If that does not solve

the problem, consult your Kenwood dealer.

Reset button

2 WARNING

Store unused batteries out of the reach of children.

Contact a doctor immediately if the battery is

accidentally swallowed.

NOTE

• The provided batteries are intended for use in

operation checking, and their service life may be

short.

• When the remote controllable distance becomes

short, replace both of the batteries with new ones.

Download from Www.Somanuals.com. All Manuals Search And Download.

Monitor Control Function

3Opening the Monitor

Egnlish

Set the vehicle’s parking brake.

Press the OPEN/CLOSE button. The monitor will

open.

2 CAUTION

The gear shift lever or other parts may interfere with

the monitor when it opens. If so, move the gear shift

lever (being sure to do so safely) before operating the

set. (The monitor is drawn back in automatically if it

cannot be opened normally due to an obstacle.)

OPEN/CLOSE

NOTE

The monitor cannot be opened unless the parking

brake is set.

3Closing the Monitor

Press the OPEN/CLOSE button. The monitor will

close.

NOTE

• The monitor cannot be closed unless the parking

brake is set.

• The position to which the monitor slides or angle

when the power is turned on can be set. (Refer to

the angle control screen on ( Page 7).)

MODE

FNC

V.SEL

KVC-1000 6.5-inch WIDE COLOR LCD TELEVISION

SCRN

AV OUT SEL.

V.OFF

3Power Off

Hold down the OPEN/CLOSE button for one second

or more to turn the set’s power off.

Press the OPEN/CLOSE button to turn the power on.

VISUAL

AUDIO

TOUCH PANEL

MULTIPLE SOURCE CONTROL

3Switching the Monitor’s Picture

V.SEL

FNC

Each time you press the V.SEL button, the monitor’s

picture switches as follows:

MODE

SCRN

AV IN setting during "VD" (Page 9)

Video input terminal (AV-IN 2) (3.5ø-Monaural)

Audio input terminal (AV-IN 2) (3.5ø-Stereo)

▼

Television or Video 1 or Video 2

▼

Navigation (RGB pictures)

AV IN setting during "NAV" (Page 9)

• Full mode

• Normal mode

▼

Television or Video 1 or Video 2

▼

Navigation (Video 1 pictures)

NOTE

The video 1 will not select when the "IN-OUT" switch

is set to “OUT” (Page 32).

2 CAUTION

• Just mode

• Zoom mode

You cannot view television and video pictures whilst

the vehicle is moving. To enjoy television and video

pictures, find a safe place to park and engage the

parking brake.

3Switching the TV/Video Picture Mode

Each time you press the MODE button, the picture

mode switches between full, zoom, just, cinema and

normal.

• Cinema mode

NOTE

You cannot operate when the wide navigation system is

connected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Monitor Control Function

3Switching the AV Output Picture

Each time you press the V.SEL button for one second

or more, AV output picture switches as follows:

▼

Egnlish

NORMAL : Picture selected from the TV control

screen(Page 15)

▼

: Picture of television

▼

VD2

: Picture input from the front AV-IN

terminal

NOTE

MODE

FNC

V.SEL

KVC-1000 6.5-inch WIDE COLOR LCD TELEVISION

The unit will not operate when the "IN-OUT" switch is

set to “IN” (Page 32).

SCRN

AV OUT SEL.

V.OFF

3Switching to the Angle/Screen Control

VISUAL

AUDIO

TOUCH PANEL

MULTIPLE SOURCE CONTROL

Screen

Pressing the SCRN button will cause the angle

control screen(monitor angle adjustment mode) or

screen control screen (screen adjustment mode) to

be displayed on the TV or video picture (Page 7).

V.SEL

FNC

MODE

SCRN

3Turning the Monitor Picture Off

Video input terminal (AV-IN 2) (3.5ø-Monaural)

Audio input terminal (AV-IN 2) (3.5ø-Stereo)

Hold down the SCRN button for two seconds or

more to turn the monitor’s picture off.

NOTE

The picture reappears when the one of the SCRN,

FNC, MODE or V.SEL buttons is pressed.

3Switching to the Source Control Screen

Press the FNC button to switch to the source control

screen (Page 15-27).

3Changing the Background of the Source

Control Screen Picture

Each time you press the FNC button, you can select

the background between 5 different patterns for the

source control screen and menu screen.

3Adjusting the Volume

When the KTC-1000R/A907 is not connected to

the system

Press the 5 button to increase the volume of the

built-in speaker.

Press the ∞ button to decrease the volume of the

built-in speaker.

When the KTC-1000R/A907 is connected

Press the 5 button to increase the volume of the

KTC-1000R/A907.

Press the ∞ button to decrease the volume of the

KTC-1000R/A907.

Download from Www.Somanuals.com. All Manuals Search And Download.

Egnlish

Angle Control Screen

Screen Control Screen

A N G L E C T R L

S C R E E N C T R L

S C R E E N

A N G L E

S L I D E

B R T

T I N

O N

D I M

OFF

C O L

A U T O

O P E N - C L O S E

C O N T

B L K

O F F

O K

3Adjusting the Angle Position [ANGLE]

3Adjusting the Picture Quality

Each time you touch [ 3 ], the monitor slants back

[BRT]

one step.

Touch [ 3 ] for a brighter screen.

Each time you touch [ 2 ], the monitor slants forward

Touch [ 2 ] for a darker screen.

one step

[TIN]

Touch [ 3 ] for a stronger green level.

Touch [ 2 ] for a stronger red level.

[COL]

Touch [ 3 ] for a deeper colour.

Touch [ 2 ] for a paler colour.

[CONT]

NOTE

Touch [ 3 ] for less contrast.

The angle can be adjusted in 9 steps.

Touch [ 2 ] for stronger contrast.

3Adjusting the Slide Position [SLIDE]

[BLK]

Touch [ 3 ] for less blackness.

Touch [ 3 ] to slide the monitor one step to the front.

Touch [ 2 ] for a stronger black level.

NOTE

Touch [ 2 ] to slide the monitor one step to the back.

• The [ TIN ] and [ COL ] cannot be adjusted for the

navigation screen or the graphic screens (Audio

source control, etc.).

• The [ TIN ] cannot be adjusted for the picture of

PAL/SECAM.

• Separate picture quality settings can be stored for

the television, video 1, video 2, graphic screens and

navigation screens and for day and night use.

NOTE

This slide position can be adjusted in 3 steps.

3Turning the Automatic Open/Close

3Turning the Dimmer Function On/Off

Function On/Off [AUTO OPEN-CLOSE]

Touch [ ON ] or [ OFF ] to switch the function on and

off.

Touch [ ON ] or [ OFF ] to switch the function on and

off.

: Switch head light ON, and switch to

nighttime viewing screen picture

■ O N

: Switch the ACC ON/OFF to open/close

the monitor

■ O F F : Leave the set in nighttime viewing screen

■ O F F : Use the OPEN/CLOSE button to

picture

open/close the monitor

NOTE

When adjusting nighttime picture quality, switch this

function ON and switch head lights ON.

If the shift lever or other parts of the vehicle interfere

with the monitor when it opens, select [ OFF ].

3Switching to the Angle Control Screen

3Switching to the Screen Control Screen

Touch [ ANGLE ] to switch to the angle control

screen.

Touch [ SCREEN ] to switch to the screen control

screen.

3Ending the Screen Control Screen

3Ending the Angle Control Screen

Touch [ OK ].

Touch [ OK ] .

Download from Www.Somanuals.com. All Manuals Search And Download.

System Setup Function

Menu Screen

Setup Menu Screen

S Y S T E M

R D S

T I

Setup

Audio

1 2 : 0 0

S O U R C E S E L E C T

T V A R E A

D A B

Egnlish

C L O C K

T O U C H

S E C U R I T Y

S E T U P

RTN

3Switching to the Menu Screen

3Switching to the System Setting Screen

Touch [ SYSTEM ] to switch to the system setting

screen (Page 9).

Press the FNC button on the monitor. The source

control screen is displayed (Page 15-27).

3Switching to the TV Area Setting Screen

Touch [ MENU ] to switch to the menu screen.

Touch [ TV AREA ] to switch to the TV area setting

screen (Page 10).

3Switching to the Setup Menu Screen

Touch [ Setup ] to switch to the setup menu screen.

3Switching to the RDS Setting Screen

3Switching to the Audio Control Screen

Touch [ RDS ] to switch to the RDS setting screen

(Page 12).

Touch [ Audio ] to switch to the audio control screen

(Page 14).

3Switching to the DAB Setting Screen

Touch [ DAB ] to switch to the DAB setting screen

(Page 22).

3Switching to the Source Control Screen

Touch the marks to switch to the source control

screen as follows:

3Switching to the Clock Adjustment

Screen

Touch this mark to switch to the Tuner control

screen (Page 18). <With the KTC-1000R/A907>

Touch [ CLOCK ] to switch to the clock adjustment

screen (Page 10).

Touch this mark to switch to the DAB control

screen (Page 22). <With the KTC-959DAB>

3Switching to the Touch Panel

Adjustment Screen

Touch this mark to switch to the disc changer

control screen (Page 24).

Touch [ TOUCH ] to switch to the panel adjustment

screen (Page 12).

3Switching to the Code Security Screen

Touch this mark to switch to the TV control screen

(Page 15).

Keep touching [ SECURITY ] for two seconds or more

to switch to the code security screen (Page 11).

Touch this mark to switch to the standby mode

screen.

3Cancelling the Setup Menu Screen

Touch [ RTN ] to switch to the menu screen.

The mark for the currently selected source is

displayed in light pink.

NOTE

Up to two disc changers can be operated.

3Cancelling the Menu Screen

Touch [ RTN ] to switch to the source control screen

for the current source.

Download from Www.Somanuals.com. All Manuals Search And Download.

Egnlish

System Setting Screen - 2

System Setting Screen - 1

A V - I N

S C R O L L

N A V

A U T O

M A N U

A V - O U T

N O RM

V D 2

O F F

B E E P

O F F

S P M O D E

N O RM

N A V

O N

S C R E E N

A U T O

S P L E V E L

M A N U

1 0

S Y S T E M

RTN

S Y S T E M

RTN

3Setting the Auto Scroll Display Function

3Setting the AV Input [AV-IN]

[SCROLL]

Touch [ VD ] or [ NAV ] to switch the AV IN 1

terminal’s input setting between Video and

Navigation mode.

This function permits the text to be scrolled and

the entire text to be displayed. Switching

between manual scrolling and automatic scrolling

is permitted.

Touch [ AUTO ] or [ MANU ] to switch the function

automatic and manual scrolling.

■ V

: Set the video mode

: Set the navigation mode

■ N A V

NOTE

■ AUTO

: Automatic scrolling

: Manual scrolling

• There is no display when the unit’s "IN-OUT" switch

is set to "OUT" (Page 32).

• If a navigation unit is connected to AV IN, be sure to

set it to [ NAV ].

■ MANU

3Setting the Touch Sensor Tone [BEEP]

Touch [ ON ] or [ OFF ] to switch the function on

and off.

3Setting the AV Output [AV-OUT]

Touch [ NORM ], [ TV ] or [ VD2 ]. The video of the

AV output terminal will be switched as follows:

■ O

: Touch sensor tone is turned on

: Touch sensor tone is turned off

■ O F F

: Picture selected from the TV control

screen (Page 15)

: Picture of the television

: Picture input from the front AV-IN

terminal

■ NORM

■ T

3Setting the On Screen Display Function

■ V D 2

[ON SCREEN]

Touch [ AUTO ] or [ MANU ] to switch the function

between automatic and manual.

NOTE

There is no display when the unit’s "IN-OUT" switch is

set to "IN" (Page 32).

: When a button on the main unit or remote

control unit is pressed, or the disc track is

changed, the audio source control

information is temporarily superimposed on

the picture

: When the lower centre of the screen is

touched whilst a TV/video picture is

displayed, the audio source control

information is temporarily superimposed on

the picture

■ AUTO

3Setting the Built-In Speaker Mode

[SP MODE]

■ MANU

■ NORM

■ N A V

■ O F F

: Sound with monitor picture

: Sound with navigation

: Switch off the built-in speakers

3Setting the Built-In Speaker Level

3Returning to the Setting Screen -1

[SP LEVEL]

Touch [ 2 ] to return to the setting screen-1.

Touch [ 3 ] to increase the volume.

3Ending the System Setting Screen

Touch [ 2 ] to decrease the volume.

Touch [ RTN ] to return to the setup menu screen.

NOTE

No display when the "SP MODE" is set to "OFF".

3Switching to the Setting Screen -2

Touch [ 3 ] to switch to the setting screen-2.

Download from Www.Somanuals.com. All Manuals Search And Download.

System Setup Function

Clock Adjustment Screen

TV Area Setting Screen

T V 1

T V 2

C L O C K

Egnlish

1 2 : 0 0 P M

R E S E T

• A u s t r i a

• D e n m r k

• G e m a n y

• B e l g i u m

• F i n l a n d

• N e t h e r l a n d

• N o r w a y

• P o r t u g a l

• S w e d e n

S Y N C

• I c e l a n d

• S w i t z e r l a n d

• Y u g o s l a v i a

O F F

• S p a i n

RTN

C L O C K A D J U S T

RTN

T V A R E A S E T

3Turning the Automatic Time Adjustment

3Selecting the Preset Bands

On/Off [SYNC]

Touch [ TV 1 ] or [ TV 2 ]. The band switches

between the TV1 and TV2.

With automatic time adjustment, you can set the

clock time automatically according to time data

sent from RDS stations (after receiving RDS

signals for several minutes). You can also set the

time manually if the automatic time adjustment

function is turned off. The factory default is

automatic time adjustment.

3Selecting the Television Area

Select the area for video broadcast viewing.

Touch [ 1 ] - [ 6 ] to select the channel setting for

your country as follows.

Touch [ ON ] or [ OFF ] to switch the function on and

off.

Germany

Iceland

PAL-B/G

(A1)

■ 1

Portugal

Netherlands

Belgium

Switzerland

Austria

Sweden

Norway

: Tune into an RDS station for 3 or 4

minutes

■ O

The time adjusts automatically to the

correct local time

: Manual adjusting

■ O F F

NOTE

Denmark

Finland

Yugoslavia

Spain

The time is not adjusted when the RDS station you

are tuned to be not transmitting a time signal. Choose

another RDS station in such a case.

3Adjusting the Time Manually [CLOCK]

(A2)

(A3)

Italy

Albania

■ 2

Touch [ 5 ] to advance

the minutes.

the hours.

PAL-I

■ 3

United Kingdom

Ireland

C L O C K

(A4)

(A5)

SECAM-L

■ 4

France

SECAM-D/K

■ 5

1 2 : 0 0

Russia

Poland

Hungary

Czech

Slovakia

Bulgaria

Roumania

Touch the [ ∞ ] to make

Touch [ ∞ ] to make the

the minutes go back .

hours go back.

SECAM-B/G

(A6)

■ 6

Greece

Setting the Minutes to "00":

Touch [ RESET ] to set the minutes to "00".

NOTE

3Ending the TV Area Setting Screen

Touch [ RTN ] to return to the setup menu screen.

• Touch [ RESET ] whilst the minute is below "30"

rounds it off, and whilst the minute is "30" or more

rounds it up.

• No display when the "SYNC" is set to "ON".

3Ending the Clock Adjustment Screen

Touch [ RTN ] to return to the setup menu screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Egnlish

Code Security Screen

T h e s y s t e m i s n o w

w a i t i n g f o r y o u r

M A S K K E Y s i g n a l .

P l e a s e i n p u t n o w .

C O D E S E C U R I T Y

RTN

3Mask Key

If you have transmitted the Mask Key's signal

once to the unit in advance, you will have to

transmit it once again if the unit has been

removed from the battery. This function helps

prevent theft.

When using the unit for the first time:

If this procedure is not carried out, the control panel of

the unit will re-open even with your vehicle's ignition

turned off.

Hold down the transmit button on the Mask Key

until the half transmit level indicator lights up in the

display. “System now checking for valid signal

code”will be displayed.

S y s t e m n o w

c h e c k i n g f o r v a l i d

s i g n a l c o d e .

Transmission part

Transmit button

C O D E S E C U R I T Y

RTN

NOTE

• Keep the Mask Key close to the signal sensor when

you transmit the Mask Key signal.

• If the Mask Key signal does not be received

correctly, the display will return to “Code rejected.

Please check MASK KEY”. In this case, repeat the

procedure in step 1.

Hold down the transmit button on the Mask Key

again until the full transmit level indicator lights up

in the display.

S y s t e m n o w

c h e c k i n g f o r v a l i d

s i g n a l c o d e .

"Code APPROVED" will appear in the display, with

the Mask Key function turning on.

If you press the RESET button or remove the battery:

The first time you turn the unit on again, “The

system in now waiting for your MASK KEY signal.

Please input now.” will appear in the display,

indicating the setting mode has been entered. Repeat

steps 1 and 2 above, and transmit the signal.

You can start operating the unit again when "Code

APPROVED" appears in the display.

C O D E S E C U R I T Y

RTN

3Ending the Code Security Screen

Touch [ RTN ] to return to the setup menu screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

System Setup Function

RDS Setting Screen

Touch Panel Adjustment Screen

N EWS

1 0 m i n

T O U C H

P A N E L

A D J U S T

A F

O F F

P l e a s e T o u c h

t h e C e n t e r o f

t h e B u t t o n i n t h e

L e f t - B o t t o m C o r n e r

R E G

A T P S

C A N C E L

R E S E T

R D S S E T U P

RTN

RDS (Radio Data System)

3Adjusting the Touch Position

RDS is a digital information system that lets you

receive signals besides those of regular radio

programmes, such as network information being

transmitted from radio stations.

When listening to an RDS station (ie, a station

with RDS capability), the programme service

name of the station is displayed along with the

frequency, advising you quickly which station is

being received.

RDS (Radio Data System) stations also transmit

frequency data for the same station. When you

are making long trips, this function automatically

switches to the particular frequency with the best

reception for the particular network of stations

that you want to listen to. The data is

automatically stored, allowing you to switch

quickly to another RDS stations, broadcasting the

same programme, that has better reception.

These include stations stored in the station

preset memory that you often listen to.

The touch panel can be adjusted if the position

touched and the operation performed do not

match.

Accurately touch the mark at the lower left and the

mark at the upper right, following the instructions in

the messages.

When the mark at the upper right is touched, the

adjustment is completed and the system setup menu

screen reappears.

NOTE

• If [ CANCEL ] is touched without touching the button

at the lower left, the adjustment is cancelled and the

screen that was set before switching to the system

setup menu reappears.

• If [ CANCEL ] is touched after touching the button at

the lower left, the button at the lower left reappears.

• If [ RESET ] is touched, the settings are reset to the

factory defaults and the setup menu screen

reappears.

EON (Enhanced Other Network)

Stations that offer EON also transmit information

about other RDS stations that have traffic

information. When you are tuned to a station that

is not transmitting traffic information, but

another RDS station starts transmitting a traffic

bulletin, the tuner automatically switches to the

other station for the duration of the bulletin.

Alarm

When an emergency transmission (announcing

disasters, etc.) is sent, all current functions are

interrupted to allow the warning to be received.

3News Bulletin Function with PTY News

Timeout Setting [NEWS]

You can arrange to have news bulletins interrupt

your current listening source, including other

radio stations. When the News Bulletin function

is on, the PTY News Timeout setting allows you

to set the interval during which further news

interruption cannot take place. You can adjust the

PTY news interruption period from 10 to 90

minutes for each journey.

Changing the Function Setting:

Touch [ 2 ] or [ 3 ] repeatedly until the desired

setting is displayed.

Touch [ 3 ] to increase the interval, and the [ 2 ] to

decrease it.

OFF ↔ 00min ↔ 10min ↔ 20min ↔ 30min ↔

40min ↔ 50min ↔ 60min ↔ 70min ↔ 80min ↔

90min

(min= minutes)

When you select the news interruption timeout

interval, the News function turns on and the NEWS

indicator is displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

When a news bulletin is received, the NEWS

indicator will blinks and reception will begin at the

preset volume.

Egnlish

NOTE

• If you choose the " 20min " setting, further news

bulletins will not be received for 20 minutes once

the first news bulletin is received.

Setting the interval at the "OFF" factory default

indicates no News Timeout will be made, meaning

that additional news bulletins will continue to be

searched for.

•This function is only available if the desired station

sends PTY-code for news bulletin or belongs to

EON-Network sending PTY-code for news bulletin.

3Alternative Frequency Function [AF]

When poor reception is experienced,

automatically switch to another frequency

broadcasting the same programme in the same

RDS network with better reception.

The AF indicator is displayed when the AF

function is turned on.

Turning AF Function On/Off:

Touch [ ON ] or [ OFF ] to switch the function on and

off.

■ O

: AF function is turned on

: AF function is turned off

■ O F F

NOTE

When no other stations with stronger reception are

available for the same programme in the RDS

network, you may hear the incoming broadcast in bits

and snatches. Turn off the AF function in such a case.

3Restricting RDS Region (Region Restrict

Function) [REG]

You can choose whether or not to restrict the

RDS channels, received with the AF function for a

particular network, to a specific region. When the

Region Restrict Function is on, the region is

restricted and the REG indicator is displayed.

Turning Region Restrict Function On/Off:

Touch [ ON ] or [ OFF ] to switch the function on and

off.

■ O

: Region restrict function is turned on

: Region restrict function is turned off

■ O F F

NOTE

Sometimes stations in the same network broadcast

different programmes or use different programme

service names.

3Auto TP Seek Function [ATPS]

When the TI function is on and poor reception

conditions are experienced when listening to a

traffic information station, another traffic

information station with better reception will be

searched for automatically. This function is on,

when unit is first powered on.

Turning Auto TP Seek Function On/Off:

Touch [ ON ] or [ OFF ] to switch the function on and

off.

■ O

: Auto TP seek function is turned on

: Auto TP seek function is turned off

■ O F F

3Ending the RDS Setting Screen

Touch [ RTN ] to return to the setup menu screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Control Function

Audio Control Screen - 1

Audio Control Screen - 2

L O U D

H P - F 1 5 0

B A L / F A D

O F F

N F

B A S S

P R E O U T

R E A R

H P - R 2 2 0

N F - L V - 1 0

T R E B L E

A U D I O

RTN

A U D I O

RTN

3Adjusting the Balance and Fader Levels

3Turning the Loudness On/Off [LOUD]

[BAL/FAD]

This function amplifies low and high tones when

the volume is turned down.

Each time you touch [ 2 ](L), the sound in the left

The LOUD indicator is displayed on the source

control screen, when the loudness function is on.

Touch [ ON ] or [ OFF ] to switch the function on and

off.

channel is emphasized.

Each time you touch [ 3 ](R), the sound in the right

channel is emphasized.

Each time you touch [ 5 ](F), the sound in the front

channel is emphasized.

■ O

: Loudness function is turned on

: Loudness function is turned off

Each time you touch [ ∞ ](R), the sound in the rear

channel is emphasized.

■ O F F

3Adjusting the Bass Level [BASS]

3Setting the Preout [PREOUT]

Each time you touch [ 3 ], the bass level is

Touch [ REAR ] or [ NF ] to switch the non-fading

preout and rear preout.

increased.

Each time you touch [ 2 ], the bass level is

decreased.

■ REAR

: Set the rear preout

: Set the non-fading preout

3Adjusting the Treble Level [TREBLE]

■ N F

Each time you touch [ 3 ], the treble level is

increased.

3Setting the High-Pass Filter for Front and

Each time you touch [ 2 ], the treble level is

decreased.

Rear Output [HP-F] [HP-R]

Each time you touch [ 2 ] or [ 3 ], you can select the

3Switching to the Audio Control Screen -2

frequency to be cut, as follows:

Touch [ 3 ] to switch to the audio control screen-2.

OFF “ 40Hz “ 60Hz “ 80Hz “ 100Hz “

220Hz “ 180Hz “ 150Hz “ 120Hz “

3Adjusting the Non-Fading Preout Level

[NF-LV]

Each time you touch [ 3 ], the non-fading sound

increased.

Each time you touch [ 2 ], the non-fading sound

decreased.

3Returning to the Audio Control Screen -1

Touch [ 2 ] to return to the audio control screen-1.

3Ending the Audio Control Screen

Touch [ RTN ] to return to the menu screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Control Function

Egnlish

TV Control Screen (Main)

3Switching to the TV Control Screen

(Shift)

Touch [ ] to swicth the TV control screen (Shift).

T I

M E N U

1 2 : 0 0

T V

V D

T V

3Switching to the Next Source Mode

T V 1 A 1 P 1

N O N A M E

MANU

1 2 c h

Touch the mark located at the lower side of ∞

to switch to the next source control screen.

LOUD

3Switching to the Previous Source Mode

Touch the mark located at the upper side of 5

to switch to the previous source control screen.

3Switching to the Menu Screen

P 1 P 2 P 3 P 4 P 5 P 6

Touch [ MENU ] to switch to the menu screen.

3Selecting the Bands

Touch [ TV ] to select the band.

Each time you touch [ TV ], the band switches

between the TV1 and TV2.

3Selecting the Video Inputs

Each time you touch [ VD ], the video input switches

between the video 1 and video 2.

NOTE

The video 1 will not select when the "IN-OUT" switch

is set to “OUT” (Page 32).

3Selecting the Channels

Auto Seek Tuning (AUTO1)

Touch [ ¢ ] to seek for channels up the band.

Touch [ 4 ] to seek for channels down the band.

Preset station Seek Tuning (AUTO2)

Touch [ ¢ ] to move to the next preset station (i.e.,

the one with the next highest number).

Touch [ 4 ] to move to the last preset station (i.e.,

the one with the next lowest number).

Manual Tuning (MANU)

Touch [ ¢ ] to increase the channel by one step.

Touch [ 4 ] to decrease the channel by one step.

3Station Preset Memory

Store the channel of the station currently being

listened to. You can then recall that station with a

single touch of a button.

Select the band/ station that you want to store.

Hold down preset station number [ P1 ] - [ P6 ] on

which you want to store the station, for two

seconds or more.

NOTE

You can store 6 stations in each of the TV1 and TV2

bands.

3Recalling a Preset Station

Touch the preset station number [ P1 ] - [ P6 ] for the

desired station. The number of the recalled station is

displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Control Function

TV Control Screen (Shift)

3Selecting the Tuning Mode

T I

M E N U

1 2 : 0 0

T V

You can choose from three tuning modes: auto

seek, preset station seek, and manual. The

“AUTO1” indicator is displayed when auto seek

tuning is selected, and the “AUTO2” indicator is

displayed when preset station seek tuning is

selected.

Egnlish

V D

T V

T V 1 A 1 P 1

N O N A M E

MANU

1 2 c h

Each time you touch [ SEEK ], the mode switches as

follows:

▼

AUTO 1

(Auto Seek Tuning)

▼

AUTO 2

(Preset Station Seek Tuning)

(Manual Tuning)

NAME

LIST

AME

SEEK

▼

MANU

3Auto Memory Entry

You can automatically store all the receivable

channels in the band currently being listened to,

and then recall them with the touch of a button

later. This function is especially useful when you

are travelling and do not know what stations are

available. Up to 6 stations can be stored this way.

3Switching to the TV List Screen

Touch [ LIST ] to switch to the TV list screen.

3Switching to the Name Set Screen

Touch [ NAME ] to switch to the name set screen

(Page 27).

Select the band for auto memory entry.

Touch [ AME ].

NOTE

You cannot operate unless the parking brake is set.

[ ¢ ] and [ 4 ] blink.

Touch [ ¢ ] or [ 4 ] to start auto memory entry.

The preset station numbers [ P1 ] - [ P6 ] are shown

in order.

3Returning to the TV Control Screen

(Main)

Touch [ ] to return to the TV control screen (Main).

When all the stations on a certain band have been

stored in the preset memory, the auto memory

entry stops. The tuner then plays the last station

received.

TV List Screen

T I

M E N U

1 2 : 0 0

1 2 c h

T V 1 P 1

I N F O - T V

T V - J A P A N

5 c h

7 c h

T V

V D

8 c h

CTRL

1 0 c h

3Selecting the Band List

Each time you touch [ TV ], the list switches between

the TV1 and TV2.

3Selecting the Station

Touch station number or name in the list for the desired

station. The number of the recalled station is displayed.

3Returning to the Source Control Screen

Touch [ CTRL ] to return to the source control

screen (Shift) .

Download from Www.Somanuals.com. All Manuals Search And Download.

Egnlish

Selecting the Channels on the TV Picture Screen

Touch the upper centre to switch between the TV1 and

TV2 bands

MODE

FNC

V.SEL

KVC-1000 6.5-inch WIDE COLOR LCD TELEVISION

SCRN

AV OUT SEL.

V.OFF

VISUAL

AUDIO

TOUCH PANEL

MULTIPLE SOURCE CONTROL

Touch the right part to increase the

channel

Touch the left part to decrease the

channel

The lower centre of the screen is touched whilst a TV/video picture is displayed, the audio source,

picture settings, video out settings, etc., are superimposed on the picture (On Screen Display). The

display turns off when the lower centre of the screen is pressed again.

Tuning mode

TV band

A U T O 2

T V 1

Channel

1 0 c h

W I D E

C I N E M A

A V O U T

V I D E O

AV output picture

mode

Screen mode

F M

E U R O I N F O

9 7 . 5

Audio source control information

Download from Www.Somanuals.com. All Manuals Search And Download.

FM/AM Tuner Control Function

Tuner Control Screen (Main)

3Switching to the Next Source Mode

T I

M E N U

1 2 : 0 0

F M

Touch the mark located at the lower side of ∞

Egnlish

A M

T U N E R

to switch to the next source control screen.

3Switching to the Previous Source Mode

F M 1 P 1

F M - I N F O

1 0 8 . 0

Touch the mark located at the upper side of 5

MANU

ALM NEWS REG AF

to switch to the previous source control screen.

3Switching to the Menu Screen

Touch [ MENU ] to switch to the menu screen.

PTY

P 2 P 3 P 4 P 5 P 6

P 1

3Selecting the Bands

Touch either [ FM ] or [ AM ] to select the band.

Each time you touch [ FM ] , the band switches

between the FM1, FM2 and FM3.

Touch [ AM ] to select the MW and LW bands.

3Tuning

Auto Seek Tuning (AUTO1)

Touch [ ¢ ] to seek increasing frequencies.

Touch [ 4 ] to seek decreasing frequencies.

Preset Station Seek Tuning (AUTO2)

Touch [ ¢ ] to move to the next preset station (i.e.,

the one with the next highest number), and [ 4 ] to

move to the last preset station (i.e., the one with the

next lowest number).

Manual Tuning (MANU)

Touch [ ¢ ] to increase the frequency by one step.

Touch [ 4 ] to decrease the frequency by one step.

NOTE

The ST indicator is displayed when stereo broadcasts

are being received.

3Station Preset Memory

Store the frequency of the station currently being

listened to. You can then recall that station with a

single touch of a button.

Select the band/station that you want to have

stored.

Hold down preset station number [ P1 ] - [ P6 ] that

you want to use for the station, for two seconds or

more.

NOTE

You can store 6 stations in each of the FM1, FM2,

FM3, and AM (MW and LW) bands.

3Recalling a Preset Station

Touch the preset station number [ P1 ] - [ P6 ] for the

desired station. The number of the recalled station is

displayed.

3Switching to the PTY Search Screen

Touch [ PTY ] to switch the PTY search screen.

(Page 21)

3Switching to the Tuner Control Screen

(Shift)

Touch [ ] to switch to the tuner control screen

(Shift).

Download from Www.Somanuals.com. All Manuals Search And Download.

Egnlish

Tuner Control Screen (Shift)

3Selecting the Tuning Mode

T I

M E N U

1 2 : 0 0

F M

You can choose from three tuning modes: auto

seek, preset station seek, and manual. The

“AUTO1” indicator is displayed when auto seek

tuning is selected, and the “AUTO2” indicator is

displayed when preset station seek tuning is

selected.

A M

T U N E R

F M 1 P 1

F M - I N F O

MANU

1 0 8 . 0

ALM NEWS REG AF

Each time you touch [ SEEK ], the mode switches as

follows.

▼

PTY

AUTO 1

(Auto Seek Tuning)

▼

AUTO 2

(Preset Station Seek Tuning)

(Manual Tuning)

SEEK

LO.S

TI VOL

AME

MONO

▼

MANU

3Auto Memory Entry

You can automatically store all the receivable

3Turning the Local Seek Function On/Off

frequencies in the band currently being listened

to, and then recall them with the touch of a

button later. This function is especially useful

when you are travelling and do not know what

stations are available. Up to 6 frequencies can be

stored this way.

With the local seek function turned on, auto seek

tuning skips stations with relatively poor

reception.

Touch [ LO.S ] to switch the local seek function on

and off.

The LO.S indicator is displayed when the local seek

function is on.

Select the band for auto memory entry.

Touch [ AME ].

[ ¢ ] and [ 4 ] blink.

Touch [ ¢ ] or [ 4 ] to start auto memory entry.

The preset station numbers [ P1 ] - [ P6 ] are shown

in order.

When all the stations in a certain band are stored in

the preset memory, the auto memory entry stops.

The tuner then plays the last station received.

NOTE

• When the AF function is turned on whilst auto

memory entry takes place, only RDS stations (i.e.,

stations with RDS capability) are stored. RDS

stations that have been preset for FM1 cannot also

be preset in FM2 or FM3.

• When the local seek function is turned whilst auto

memory entry takes place, stations with poor

reception are not stored.

• When the Traffic Information function is on, only the

local traffic information station frequency will be

stored.

3Turning the Monaural Reception On/Off

When poor stereo reception is experienced, this

function will reduce noise and improve listening

conditions.

Touch [ MONO ] to switch the monaural reception on

and off.

The MONO indicator is displayed when monaural

reception is on.

Download from Www.Somanuals.com. All Manuals Search And Download.

FM/AM Tuner Control Function

Tuner Control Screen (Shift)

3Traffic Information Function

You can listen to traffic information. If you are

listening to discs, they will continue playing until

a traffic bulletin is broadcast.

Egnlish

Turning TI function On/Off:

Touch [ TI ] on the control screen to turn the function

on and off.

When the function is on, the TI indicator is turned on.

When a traffic information station is received, the TI

indicator blinks.

If you are listening to a disc when a traffic bulletin

begins, playback will be interrupted. When the

bulletin ends or poor reception causes signal losses ,

the disc will continue to play again.

Switching to a Different Traffic Information Station:

Use [ 4 ] / [ ¢ ] to make an auto seek of the TI

stations in a certain band.

NOTE

• When you are listening to a disc, you cannot change

to another TI station.

• When the auto TP seek function is turned on and

reception starts to weaken, the tuner automatically

seeks stations with better reception.

• If you are tuned to a station that is not a traffic

information station itself but which provides EON

services, you can still have traffic information

received.

3Presetting the Volume for Traffic

Information/News

Preset the volume to be used when traffic

information/news starts to be broadcast.

Tune into the station for which you want to set the

volume.

Adjust the volume to the desired level.

Keep touching [ TI VOL ] for two seconds or more.

The volume level that the data has been stored.

Future traffic information broadcasts are heard at

the preset level.

NOTE

• The volume cannot be lowered by this function

during tuner reception. The volume is only set when

it is louder than the listening volume of the tuner.

• You can arrange only to listen to traffic information

/news bulletins with at preset volume with the

volume set at minimum.

3Returning to the Tuner Control Screen

(Main)

Touch [ ] to return to the tuner contorl screen

(Main).

Download from Www.Somanuals.com. All Manuals Search And Download.

Egnlish

PTY Search Screen

3Seeking the Selected Programme Type

F M - I N F O

ENG.

J a z z M u s i c

Touch [ ¢ ] to make a seek of frequencies with

LANG.

your selected type of programme.

S o c i a l A f f a i r s

R e l i g i o n

If your selected type of programme is found, the

name of the station is displayed and the station is

tuned into.

P h o n e I n

3Cancelling the PTY Search Screen

Touch [ CTRL ] to return to the source control

screen.

T r a v e l

T o u r i n g

H o b b y

L e i s u r e

J a z z M u s i c

CTRL

Conduct auto seek tuning only on those stations

with selected kinds of programmes.

NOTE

You cannot use this function whilst the traffic

information function is turned on.

3Changing the Display Language to

French or German

In the PTY mode, touch [ LANG. ] to display the name

of the language currently used.

3Selecting the Type of Programme to be

Received

Touch either [ ∞ ] or [ 5 ] repeatedly to select the

type of programme in the list.

Touch the list to select the type of programme you

want to listen to.

News

Current Affairs

Information

Sports

Current Affairs

Information

Sports

Education

Drama

Culture

Science

Varied Speech

Pop Music

Rock Music

Easy Listening

Education

Drama

Culture

Science

Varied Speech

Pop Music

Rock Music

Easy Listening

Light Classics M Light Classics Music

Serious Classics Serious Classics

Other Music

Weather & Metr Weather & Metr

Finance Finance

Children’s progs Children’s programs

Social Affairs

Religion

Phone In

Travel & Touring Travel & Touring

Leisure & Hobby Leisure & Hobby

Jazz Music

Country Music

National Music National Music

Oldies Music

Folk Music

Documentary

All Speech

All Music

Social Affairs

Religion

Phone In

Jazz Music

Country Music

Oldies Music

Folk Music

Documentary

All Speech

All Music

(S: Speech, M: Music)

Download from Www.Somanuals.com. All Manuals Search And Download.

DAB Tuner Control Function

DAB Setup Screen

3Dynamic Range Control [DRC]

R D S

D R C

R E G

C H G

Touch [ ON ] or [ OFF ] to switch the DRC function on

and off.

O F F

Egnlish

■ O

: Dynamic range control is turned on

: Dynamic range control is turned off

■ O F F

3Restricting the DAB Region (Region

I N T

Restrict Function) [REG INT]

Touch [ ON ] or [ OFF ] to switch the Region restrict

function on and off.

D A B S E T U P

RTN

■ O

: Region restrict function is turned on

: Region restrict function is turned off

■ O F F

3Automatic Switching from DAB to RDS

[RDS CHG]

Touch [ ON ] or [ OFF ] to switch the function on and

off.

: Automatic DAB-RDS switching function is

turned on

: Automatic DAB-RDS switching function is

turned off

■ O

■ O F F

DAB Control Screen (Main)

3Service Preset Memory

T I

M E N U

1 2 : 0 0

S +

Touch [ BAND ] to select the preset band.

S -

D A B

Each time you touch [ BAND ], the preset band

switches between the DAB1, DAB2 and DAB3.

DAB

E N S E M B L E L A B E L # # #

P 1

1 4 5 1 . 0 7 2

Receive the service to be preset.

AUTO1 ALM NEWS REG AF

MAIN DAB DRC PR

Hold down preset number [ P1 ] - [ P6 ] for two

seconds or more to preset the service.

The service is preset when the number of the

button blinks once.

BAND

PTY

Recalling a Preset Service:

P 1 P 2 P 3 P 4 P 5 P 6

Touch [ BAND ] to select the preset band, and press

the desired preset number [ P1 ] - [ P6 ]. The number

of the pressed button is shown in the display.

3Switching the Ensemble

In Auto Ensemble Seek Mode (AUTO1)

Each time you touch [ ¢ ], Auto Ensemble Seek

begins toward higher frequencies, and each time you

touch [ 4 ], seeking begins toward lower

frequencies.

3Turning the DAB PTY Search On/Off

Touch [ PTY ] to switch the DAB PTY search on and

off.

3Switching to the DAB Control Screen

In Preset Ensemble Seek Mode (AUTO2)

Touch [ ¢ ] to move to the next preset station (i.e.,

the one with the next highest number), and [ 4 ] to

move to the last preset station (i.e., the one with the

next lowest number).

(Shift):

Touch [ ] on the DAB control screen (Main) to

swicth to the DAB control screen (Shift).

3Switching to the Next Source Mode

In Manual Seek Mode (MANU)

Touch the mark located at the lower side of ∞

Touch [ ¢ ] to increase the receiving frequency by

one step or each touch [ 4 ] to decrease it by one

step.

to switch to the next source control screen.

3Switching to the Previous Source Mode

3Selecting the Type of Programme to be

Touch the mark located at the upper side of 5

Received

to switch to the previous source control screen.

Touch [ S- ] or [ S+ ] repeatedly to select the type of

programme you want to listen to.

3Switching to the Menu Screen

Touch [ MENU ] to switch to the menu screen.

NOTE

See KTC-959DAB Instruction Manual for type of

programme.

Download from Www.Somanuals.com. All Manuals Search And Download.

Egnlish

DAB Control Screen (Shift)

3Primary/Secondary Switching

T I

M E N U

1 2 : 0 0

P +

Each time you touch [ P/S ], the service switches as

follows:

P -

D A B

▼

DAB

E N S E M B L E L A B E L # # #

P 1

1 4 5 1 . 0 7 2

Primary

▼

AUTO

ALM NEWS REG AF

Secondary 1

MAIN DAB DRC PR

▼

Secondary 2

BAND

PTY

3Presetting the Volume Level for Traffic

AME

SEEK

P/S

TITLE

SUB

TI VOL

Information/News

Preset the volume level to be used when traffic

information/news start to be broadcast.

3Selecting the Seek Mode

Each time you touch [ SEEK ], the mode switches as

follows:

Tune into the station for which you want to set the

volume.

▼

AUTO

(Auto Ensemble Seek)

(Manual Seek)

Adjust the volume to the desired level.

▼

Keep touching [ TI VOL ] for two seconds or more.

MANU

The volume level that has now been stored.

Future traffic information/news broadcasts are

heard at the preset level.

3Auto Memory Entry

You can automatically store all the receivable

frequencies in the band currently being listened

to, and then recall them with the touch of a

button later. This function is especially useful

when you are travelling and do not know what

stations are available. Up to 6 frequencies can be

stored this way.

NOTE

• The volume level cannot be lowered by this function

during tuner reception. The volume is only set when

it is louder than the current listening volume of the

tuner.

• When the volume level is set to minimum, it is still

possible to listen to traffic information bulletins at

preset volume.

Select the band for auto memory entry.

Touch [ AME ].

3Returning to the DAB Control Screen

[ ¢ ] and [ 4 ] blink.

Touch [ ¢ ] or [ 4 ] to start auto memory entry.

(Main)

Touch [ ] to return to the DAB control screen

(Main).

The preset station numbers [ P1 ] - [ P6 ] are shown

in order.

When all the stations on a certain band have been

stored in the preset memory, the auto memory

entry stops. The tuner then plays the last station

received.

Recalling a Preset Station:

Touch the preset station number [ P1 ] - [ P6 ] for the

desired station. The number of the recalled station is

displayed.

3Dual Channel Audio Switching

The Dual Channel Audio can be switched between

Main and Sub.

Touch [ SUB ] to switch the dual channel audio

between main and sub.

NOTE

When "SUB" is selected, the sub audio continues to

be received even when the service is switched to

another, provided that the new service also

broadcasts a dual channel audio programme.

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc Changer Control Function

Disc Changer Control Screen (Main)

T I

M E N U

1 2 : 0 0

D +

3Track Repeat Function

Repeat playing the current track.

D -

C D - C H 1

Egnlish

Turning Track Repeat Play Function On/Off:

Touch [ REP ] to switch the track repeat play function

on and off.

The REP indicator is displayed when the track repeat

play function is turned on.

Disc 5 - Tr 1 2

B E S T H I T S

2 : 3 4 P

REP

NOTE

The track repeat play function is cancelled when you

stop playing the disc.

3Disc Repeat Function

DSCN SCN DREP REP MRDM RDM

Repeat playing the current disc.

3Pausing and Restarting CD Play

Turning Disc Repeat Play Function On/Off:

Touch [ DREP ] to switch the disc repeat play

function on and off.

Touch [ 38 ] to make the disc pause.

Touch [ 38 ] again to start play again.

NOTE

The DREP indicator is displayed when the disc repeat

play function is turned on.

When one disc has finished playing its last track, the

next disc in the changer starts playing. When the last

disc in the changer has finished, the player returns to

the first disc and starts playing it.

NOTE

The disc repeat play function is cancelled when you

stop playing the disc.

3Track Scan Function

3Track Search

Successively play the beginning of each track on a

Search forwards or backwards through the tracks

on the disc until you reach the one that you want

to listen to.

disc until you find the one that you want to listen

to.

Turning Track Scan Function On/Off:

Touch [ SCN ] to switch the track scan function on

and off.

Making a Forward Track Search:

Touch [ ¢ ] to display the desired track number.

Touch once to fast forward to the next track, twice to

fast forward to the track after that, and so forth.

Play starts at the beginning of the displayed track

number.

The SCN indicator is displayed when the track scan

function is turned on.

The first 10 seconds of each track are played, and the

tracks are played in order.

Stopping to Listen to the Track Being Scanned:

Touch [ 38 ] or [ SCN ] again to stop the scan and

keep on listening to a track normally.

Making a Reverse Track Search:

Touch [ 4 ] to display the desired track number.

Touch once to search back to the beginning of the

current track, twice to search back to the beginning

of the previous track, and so forth.

NOTE

Play starts at the beginning of the displayed track

number.

• The track scan function is cancelled when you stop

playing a disc.

• The track scan function only scans each track on a

disc once.

3Fast Forwarding and Reversing Disc Play

Fast Forwarding Disc Play:

3Disc Scan Function

Hold down on [ ¢ ].

Release your finger to play the disc at that point.

Successively play the beginning of each disc on a

changer until you find the one that you want to

listen to.

Reversing Disc Play:

Hold down on [ 4 ].

Release your finger to play the disc at the point.

Turning Disc Scan Function On/Off:

Touch [ DSCN ] to switch the disc scan function on

and off.

The DSCN indicator is displayed when the scan

function is turned on.

The first 10 seconds of each disc are played, in the

order in which they are loaded on the changer.

3Disc Search

Search forwards or backwards through the discs

in a disc changer until you reach the one that you

want to listen to.

Making a Forward Disc Search:

Touch [ D + ] to display the desired disc number.

Each time [ D + ] is touched, the displayed disc

number increases by one.

Stopping to Listen to the Disc Being Scanned:

Touch [ 38 ] or [ DSCN ] again to stop the scan and

keep on listening to the disc normally.

Play starts at the beginning of the displayed disc.

NOTE

Making a Reverse Disc Search:

• The disc scan function is cancelled when you stop

playing a disc.

Touch [ D – ] to display the desired disc number.

Each time [ D – ] is touched, the displayed disc

number decreases by one.

• The disc scan function only scans each disc on the

changer once.

Play starts at the beginning of the displayed disc.

NOTE

• "LOAD" is displayed when discs are being exchanged

on the disc changer.

"LOAD" is displayed when discs are being exchanged

on the disc changer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Egnlish

3Track Random Play Function

Play all the tracks on the current disc in random

order.

Touch [ RDM ] to switch the random play function

on and off.

The RDM indicator is displayed when the random

play function is turned on.

The display of the track number changes

continuously as the next track is being selected.

When the track has been selected, play starts.

To change the track being heard, touch [ ¢ ].

Another track is selected and played.

NOTE

The random play function is cancelled when you stop

playing a disc.

3Magazine Random Play Function

Play the tracks on all the discs in the disc changer

in random order.

Touch [ MRDM ] to switch the magazine random

play function on and off.

The MRDM indicator is displayed when the

magazine random play function is turned on.

The display of the disc and track numbers change

continuously as the next track is being selected.

When the disc/track has been selected, play starts.

To change the track being heard, touch [ ¢ ].

Another disc/track is selected and played.

NOTE

• The magazine random play function is cancelled

when you stop playing a disc.

• The time needed for random selection depends on

the number of discs loaded in the disc magazine.

3Switching to the Disc Changer Control

Screen (Shift)

Touch [ ] to switch to the disc changer control

screen (Shift).

3Switching to the Next Source Mode

Touch the mark located at the upper side of ∞ to

switch to the next source control screen.

3Switching to the Previous Source Mode

Touch the mark located at the lower side of 5 to

switch to the previous source control screen.

3Switching to the Menu Screen

Touch [ MENU ] to switch to the menu screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc Changer Control Function

Disc Changer Control Screen (Shift)

3To Scroll Manually

T I

M E N U

1 2 : 0 0

D +

Touch [ SCRL ] to display the disc title or the track

title. The titles will be displayed in one scrolling

display.

D -

C D - C H 1

Egnlish

Disc 5 - Tr 1 2

B E S T H I T S

2 : 3 4 P

3Selecting the Time Display for CDs

Each time you touch [ TIME ], the time display during

disc play switches as follows:

REP

▼

P : Elapsed time of track being played

▼

A : Elapsed time of entire disc

▼

TITLE SCRL

TIME

LIST

NAME

R : Remaining time of entire disc

3Selecting the Name or Title Display for

Discs

3Switching to the Disc List Screen

Each time you touch [ TITLE ], the display during disc

play switches as follows:

Touch [ LIST ] to switch the disc list screen.

(Page 26)

3Switching to the Name Set Screen

▼

Disc name (DNPS)

Touch [ NAME ] to switch the name set screen.

(Page 27)

▼

Disc title (CD text)

▼

NOTE

Track title (CD text)

You cannot operate unless the parking brake is set.

3Returning to the Disc Changer Control

NOTE

Screen (Main)

• You can give names to discs through the presetting

disc name function.

• If you try to display the name of a disc that does not

have one, "NO NAME" is displayed instead.

• If you try to display the title of a disc that does not

have one, “NO TEXT” is displayed instead.

Touch [ ] to return to the disc changer control

screen (Main).

Disc List Screen

3Switching the Display for Discs

T I

M E N U

1 2 : 0 0

2 : 3 4

Disc 5 - Tr 1 2

Touch [ TITLE ] to swich the display between the disc

title and disc name in the list.

B E S T H I T S - V 1

B E S T H I T S - V 2

N o N a m e

3Returning to the Source Control Screen

Touch [ CTRL ] to return to the source control

screen (Shift) .

N o N a m e

TITLE

N o N a m e

CTRL

3Changing to the Disc List

Each time you touch [ ] , the disc list switches

between the disc1-6 and disc 7-10.

NOTE

Depending on the connected model, a 6-disc changer

might be identified as a 10-disc changer.

3Selecting the Disc

Touch the disc number or name in the list for the

desired disc. The number of the changed disc is

displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Name Set Function

Name Set Screen

Egnlish

B E S T H I T S

A B

a b

1 2

Ä ä

M N

S P C

V W X

N A M E S E T

O K

3Station Name Preset (SNPS) /Disc Name

Preset (DNPS)

1 If the cursor is in the desired character input

position, go on to step 4. If not, touch either [ 2 ] or

[ 3 ] to move the cursor to the desired position.

Touching [ 2 ] moves the cursor to the left and

touching [ 3 ] moves it to the right.

2 Touch [ ∞] or [ 5] to switch the character lists.

NOTE

When all characters are displayed on the character

list, [ ∞] and [ 5] do not appear.

3 Touch [ A B ], [ a b ], [ 1 2 ] or [ Ä ä ] to switch the

character lists.

4 Touch a character.

5 Continue steps 1 and 4 until all the characters have

been input for the name.

NOTE

• You can enter up to 12 characters for each name.

• To enter a space, touch [ SPC ]. A blank is inserted

and the cursor moves to the right.

6 Touch [ OK ] to finish name entry and leave the

name preset mode.

NOTE

• If you want to change the name of a station, first

display the name of the station (following step 1),

then change the letter(s) that you by following steps

2, and 4.

• You can assign names for up to 30 TV stations.

• You can only store names for up to 100 CDs. If you

store the name for an 101st CD, the first one will be

erased automatically.

• CDs are identified by their total length and number

of tracks. If you play another CD that happens to

have exactly the same specifications as another CD

whose name is stored, the wrong name may be

displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control Function

VOLUME buttons

SRC

SRC button

–

Egnlish

TV/VD

TUNE

TRACK

ATT button

DISC

–

M/S

V.SEL button

FNC button

MODE

V.SEL

FNC

MODE button

AME

REAR AV

REAR AV button

OPEN

SP button

OPEN button

Basic Source Control Function

• SRC button

Each time you press the SRC button, the source mode switches as follows:

▼

Tuner mode

▼

Disc changer mode

▼

TV mode

▼

Standby mode

NOTE

• The mode switches to the next mode from any mode which cannot be used.

• The tuner mode and disc changer mode will differ depending on the unit that is connected.

• VOLUME buttons

Press the ª button to increase the volume.

Press the ·button to decrease the volume.

• ATT button

Turn down the volume quickly. To return the volume to its original level, press the button again.

• SP button

Switch to the built-in speaker mode.

• OPEN button

Open/Close the monitor.

NOTE

The “

” button cannot be used.

Visual Function

• V.SEL button

Each time you press V.SEL button, the image video will switch between the navigation, television and video.

• MODE button

Each time you press MODE button, the screen mode switches between the full, zoom, just, cinema and

normal.

• FNC button

Press the FNC button to switch the source control screen.

Each time you press FNC button, the back picture in the source control screen changes.

• REAR AV button

Each time you press REAR AV button, the AV output mode switches between the normal, television and

video 2 (from the front AV-IN terminal).

Download from Www.Somanuals.com. All Manuals Search And Download.

Egnlish

SRC

–

4 button

¢ button

38 button

TV/VD

TUNE

TRACK

FM+ button

AM– button

DISC

–

M/S

MODE

V.SEL

FNC

AME

REAR AV

AME button

OPEN

TV Control Function

• 38 button

Each time you press the 38 button, the tuning mode switches to auto 1, to auto 2 and manual.

• TUNE buttons

Press the 4 button to make decreasing seeks.

Press the ¢ button to make increasing seeks.

Start the auto memory entry during the auto memory entry mode.

• FM+ button

Switch between the TV1, TV2, video1 and video2.

• AME button

Selects the band for auto memory entry.

Press the AME button.

Press the ¢ button or 4 button to start auto memory entry.

Tuner Control Function

• 38 button

Each time you press the 38 button, the tuning mode switches to auto 1, auto 2 and manual.

• TUNE buttons

Press the 4 button to make decreasing seeks.

Press the ¢ button to make increasing seeks.

• FM+ button

Select and switch between the FM1, FM2 and FM3 bands.

• AM– button

Select the MW and LW bands.

Disc Changer Control Function

• 38 button

Press the 38 button to make the disc pause.

Press the 38 button to start play again.

• TRACK buttons

Press the 4 button to search through the tracks backwards.

Press the ¢ button to search through the tracks forwards.

• DISC buttons

^{Press the AM}– button to search through the discs backwards.

Press the FM+ button to search through the discs forwards.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Accessories

Installation Procedure

1. To prevent short circuits, remove the key from the

External view

ignition and disconnect the - terminal of the battery.

2. Make the proper input and output cable connections

for each unit.

......... Number of items

Egnlish

3. Connect the wiring harness cables in the following

order: ground, battery, ignition.

4. Connect the wiring harness connector to the unit.

5. Install the unit in your car.

6. Reconnect the - terminal of the battery.

7. Press the reset button.(See p. 4)

2 CAUTION

........1

........2

........1

........2

........1

........6

........1

........2

• If your car's ignition does not come with an ACC

position, connect the ignition cables to a power

source that can be turned on and off with the

ignition key. If you connect the ignition cable to a

power source that receives a constant

voltage supply, as with battery cables, the battery

may die.

• If the fuse blows, first make sure that the cables

have not caused a short circuit, then replace the old

fuse with one with the same rating.

• Do not let unconnected cables or terminals touch

metal on the car or anything else conducting

electricity. To prevent short circuits do not remove

the caps from unused terminals or from the ends of

the unconnected cables.

• After the unit is installed, check whether the brake

lamps, blinkers, wipers, etc. on the car are working

properly.

• Insulate unconnected wires with vinyl tape or other

similar material.

• Mount the unit so that the mounting angle is 30° or

less.

2 CAUTION

The use of any accessories except for those provided might result in damage to the unit. Make sure only to use

the accessories shipped with the unit, as shown above.

Installation of Monior Unit

2 CAUTION

When mounting the main unit after checking the operation, close the monitor first.

NOTE

• Move the fittings on both sides to suit the installation chassis and select the embedding position from among

the 3 positions.(

:Fixing screw)

• When the fittings are set closest to the front (i.e., the embedding position is farthest back), use the hard rubber

frame (Accessory 5).

Accessory 5

Accessory 9

Download from Www.Somanuals.com. All Manuals Search And Download.

Egnlish

On cars where there is no compartment in the centre for installing a car audio unit:

Use the spacer (Accessory 0) to affix the centre unit sleeve and the sleeve attached to the main unit in such a way

that they are correctly aligned both depthwise and horizontally.

On cars lacking a centre

compartment

Accessory 0

Removing Unit

■

Removing the Hard Rubber Frame

Engage the catch pins on the removal tool and

remove the two locks on the lower level.

Lower the frame and pull it forward as shown in the

figure.

When the lower level is removed, remove the upper

two locations.

NOTE

The frame can be removed from the top side in the

same manner.

Catch

Lock

Accessory 4

■

Removing the Unit

Refer to the section “Removing the Hard Rubber

Frame” and then remove the hard rubber frame.

Remove the Hex-head screw (Accessory 9) with

integral washer (M4×8) on the back panel.

Catch facing up

Pull the unit all the way out with your hands, being

careful not to drop it.

Insert the two removal tools deeply into the slots on

each side, as shown.

2 CAUTION

Be careful to avoid injury from the catch pins on the

removal tool.

Lower the removal tool toward the bottom, and pull

out the unit halfway whilst pressing towards the

inside.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Connections

Accessory 6

Egnlish

Audio/Visual Input or Output

•Visual (Yellow)

•Audio left (White)

•Audio right (Red)

Kenwood navigation unit

2CAUTION

Accessory 3

When disconnecting the I/F cable,

pull on the connector’s ring.

KVC-1000

M 4

NAV

IN OUT

I / F

Accessory 2

Accessory 1

To parking brake detection switch harness

of car

NOTE

2 CAUTION

Parking sensor cable (Green)

IN-OUT setting

For the sake of safety, be sure to connect

the parking sensor.

PRK SW

•Set to "IN" when using a video

player or when connecting a

navigation unit other than

Kenwood.

•Set to "OUT" when connecting to

another monitor.

Automatic illumination control

cable (Orange)

To car headlight switch

Ignition key switch

ILLUMI

Connection cable

(Provided with the KTC-1000R/A907)

Ignition cable (Red) ª12V

ACC

KTC-1000R/A907

Battery cable (Yellow) ª12V

BATT

Fuse (5A)

Connection cable

(Provided with the C907)

Ground cable (Black) ·(To car chassis)

C907

–

Battery

MASTER SW cable (White/Red)

When not connected to the KTC-1000R/A907,

this cable should be connected to ·.

NOTE

MASTER

When the KTC-1000R is connected,

see the KTC-1000R Instruction

Manual

2 CAUTION

The unit will not operate unless the cable is

connected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting and Install Antenna Units

Egnlish

■

Connection of Antenna Unit

2 CAUTION

Incar antennas have a lower reception sensitivity than antennas intended for outside mounting. The picture may not

appear or may be disturbed if the signal in your area is weak.

To the monitor unit

Booster switch

Set this booster switch to

"OFF" if there is ghosting

of the on-screen image

due to electromagnetic

fields.

Ignition key switch

ACC

Ignition cable (Red)ª12V

Fuse(1A)

Car fuse box

(Main fuse)

Ground cable (Black) ·(To car chassis)

–

+ Battery

■

Installation for Antenna Unit

• Attach the antenna to the inner glass surface of the rear window using double-sided tape. Carefully check the installation

location as the tape can only be stuck on once.

• If the surface temperature of the glass of the rear window is low, warm it by turning on the power of the rear defogger.

A cold window glass surface will weaken the adhesive strength of the double-sided tape.

Also, if installation inside the cabin is performed on a day with high humidity or when it is raining, the high humidity level

will weaken the adhesive strength of the double-sided tape.

• Do not install the antenna in a location where it may obstruct the field of view during driving, such as on the windshield.

Check the location where the antenna is to be attached. Clean off any grease

or dirt from the installation location using the supplied glass cleaner, clean the

area with water and allow to dry.

Antenna parts

2 CAUTION

Antenna unit

Clean the glass thoroughly as failure to clean the glass can not only weaken

the adhesive strength of the double-sided tape, but may also cause it to come

loose.

Remove the protective strips from the antenna parts and the back of the

antenna unit.

Bundle cables

with the

Attach the double-sided tape of the antenna parts and the antenna unit to the

rear windshield glass. Attach the double-sided tape by firmly pressing down

from the top. Secure cables using the supplied clampers.

Rear window

clamper bar

After attaching the antenna with the double-sided tape, allow it to sit

undisturbed for 24 hours. Take care not to apply force to the antenna or allow it

to get wet during this time.

Wire the antenna cable to the hideaway unit.

Accessory 8

Rear seat

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting Guide

What might appear to be a malfunction in your unit may just be the result of slight

misoperation or miswiring. Before calling service, first check the following table for possible

problems.

PROBLEM

POSSIBLE CAUSE

SOLUTION

Egnlish

The power does not turn on.

The fuse has blown.

After checking for short circuits in the

cables, replace the fuse with one having

the same rating.

Connect the same cable to the ignition as

the battery cable.

No ACC position on vehicle ignition.

Nothing happens when the

buttons are pressed.

The computer chip in the unit is not

functioning normally.

Press the reset button on the unit (see

page 4).

The monitor does not

open/close.

The parking brake is not engaged.

For safety reasons, the monitor does not

open while the vehicle is moving.

Engaging the parking brake.

No television/ video image

appears.

The unit is not connected to the parking brake

detection switch.

Make proper connections according to

”Connections“ (See page 32).

The parking brake is not engaged.

For safety reasons no television/ video

images are displayed while the vehicle is

moving. Engaging the parking brake will

cause images to be displayed.

The screen is dark.

The unit is in a location where temperature is

low.

If the temperature of the monitor unit

drops, the screen may appear darker

when power is first turned on due to the

characteristics of a liquid crystal panel.

Wait a while after turning power on for

the temperature to rise. Normal

brightness will return.

The screen does not darken

when the vehicle’s lights are

turned on

The unit is set to auto dimmer.

When the unit is set to auto dimmer, it is

not linked to the vehicle's light switch.

The illumination cable has not been

connected. (If manual dimmer is set)

Make proper connections according to

”Connections“ (See page 31).

AM/FM radio reception is poor

and/or there is noise.

The TV antenna and vehicle‘s radio antenna

are too close.

• Separate the two antennas as far as

possible.

• Turn off the main unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

The following indications are used to inform you that there is a problem with the connections of

the system.

Egnlish

BUS-E50: Two or more the KTC-1000R or A907 are connected.

BUS-W02: The No. switch of the connected disc changers is set to the same number (1 or 2) for both units.

] Set the No. switch of one disc changer to "1" and the other unit to "2" to enable proper use.

BUS-W08: Two or more monitors are connected to the BUS terminal.

The following messages are displayed when certain problems are occurring in your system.

Take the recommended actions.

No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.

EJECT

] Load the disc magazine properly.

No CD in the unit.

] Insert the CD.

No disc has been loaded in the disc magazine.

NO DISC

E-04

] Load a disc into the disc magazine.

No disc has been loaded in the disc magazine.

] Load a disc into the disc magazine.

The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.

] Clean the CD and load it correctly.

Nothing has been recorded on the MD.

] The next MD will automatically be played.

BLANK

No tracks are recorded on the MD, although it has a title.

NO TRACK

E-99

] The next MD will automatically be played.

Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.

] Check the disc magazine. And then press the reset button on the unit. If the "E- 99" code does not

disappear, consult your nearest service center.

The protective circuit in the unit activates when the temperature inside the automatic disc changer

exceeds 60°C (140°F), stopping all operation.

HOLD

] Cool down the unit by opening the windows or turning on the air conditioner. As the temperature

falls below 60°C (140°F), the disc will start playing again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Specifications subject to change without notice.

Monitor Section

Picture size ......................................................................................................................................6.5 inches wide

142.6(W) × 80.7(H) mm

Egnlish

Display system ................................................................................................................Transparent TN LCD panel

Drive system......................................................................................................................TFT active matrix system

Number of pixels............................................................................................336.960 pixels (480 H × 234 V × RGB)

Effective pixels ............................................................................................................................................99.99%

Pixel arrangement..............................................................................................................RGB striped arrangement

Back lighting ................................................................................................................................Cold cathode tube

Buit-in speaker ........................................................................................................................1 W (40mm × 20mm)

TV Tuner Section

Colour system ......................................................................................................................................PAL/SECAM

NTSC/PAL (Video)

Channel selection system....................................................................................PLL frequency synthesizer system

Demoduration system ................................................................................................................Split carrier system

Television system

Channel converge

PAL-B/G

2 - 12ch

A - Hch

PAL-I

SECAM-L

2 - 10ch

SECAM-D/K

1 - 12ch

SECAM-B/G

2 - 12ch

VHF

UHF

A - Jch

21 - 69ch

Antenna input ....................................................................................................4-ch diversity (75 Ω /3.5 ø minijack)

External video input level (miniplug)........................................................................................................1 Vp-p/75 Ω

External audio max. input level (miniplug)..................................................................................................1 V/22 KΩ

External video input level (RCA jacks) ....................................................................................................1 Vp-p/75 Ω

External audio max. input level (RCA jacks) ..............................................................................................1 V/22 KΩ

Video output level (RCA jacks) ................................................................................................................1 Vp-p/75 Ω

Audio output level (RCA jacks)..............................................................................................................500 mV/1 KΩ

General

Operating voltage ..................................................................................................................14.4 V DC (11 to 16 V)

Consumed current ............................................................................................................................................2.0 A

Operational temperature range ........................................................................................................–10°C to +60°C

Storage temperature range ..............................................................................................................–20°C to +85°C

Size ..............................................................................................................................180(W) × 50(H) × 182(D) mm

7-1/16(W) × 1-15/16 (H)× 7-3/16(D) inch

Installation size ............................................................................................................178(W) × 50(H) × 165(D) mm

7(W) × 1-15/16(H) × 6-1/2(D) inch

Weight ................................................................................................................................................1.8 kg(4 LBS)

TV Antenna Unit

Output inpedance ......................................................................................................................75 Ω /3.5 ø miniplug

Operating voltage ........................................................................................................................................12 V DC

Consumed current ............................................................................................................................................1.0 A

Cable length ........................................................................................................................................................5 m

Size ............................................................................................................................50(W) × 14.5(H) × 500(D) mm

1-15/16(W) × 9/16(H) × 19-11/16(D) inch

Weight ........................................................................................................................................................70 g (x2)

Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels may not light or

may light incorrectly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Insignia Network Card NS GWII1106 User Manual
Intel Life Jacket SC5300 User Manual
JVC Speaker TH BA1 User Manual
Karcher Pressure Washer K 289 M User Manual
Kaz Humidifier V3900 User Manual
Kenmore Water System 6253486 User Manual
Kensington MP3 Docking Station M01039 User Manual
Kenwood Cassette Player CT 201 User Manual
Kenwood Two Way Radio TK 8102H User Manual
KitchenAid Refrigerator 2210725 User Manual