KIV-BT901
KIV-701
DIGITAL MEDIA RECEIVER
INSTRUCTION MANUAL
Before reading this manual, click the button below to check
the latest edition and the modified pages.
Check the latest edition
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new Digital
Media-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided
below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model KIV-BT901/ KIV-701 Serial number
US Residents Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2011 Kenwood Corporation All Rights Reserved.
11ORD_IM337_Ref_K_en_00
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
Notes
2WARNING
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check with
your Kenwood dealer to make sure that they work
with your model and in your area.
• Characters that conform to ISO 8859-1 can be
displayed.
• The Radio Data System feature won’t work where
the service is not supported by any broadcasting
station.
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
To prevent injury or fire, take the following
precautions:
• Do not watch or fix your eyes on the unit’s display
when you are driving for any extended period.
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
Do not use this unit before canceling
Demonstration mode
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel
the Demonstration mode. Refer to <Exit of the
•
The demonstration is an operation image. It may be
different from actual operation.
How to reset your unit
If this unit or the connected unit (auto disc changer,
etc.) fails to operate properly, reset the unit. While
pressing the [Volume] knob and the [MENU] button,
press the [SRC] button for at least 3 seconds. The unit
returns to factory settings when the reset operation
is complete.
SRC MENU Volume
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with
a cloth moistened with neutral cleaner, then wipe it
again with a clean soft dry cloth.
¤
•
Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth or
using a volatile liquid such as thinner or alcohol may scratch
the surface or erases characters.
English
|
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Component Names and Functions
1
2
3
4
5
Rear view
AUX
6
7
8
9
10
11
12
13
1
[MENU] button
7
[SRC] button
To select a song or set functions. See <Menu List
To turn on this unit and select the Source (press
the button).
To turn off this unit (press the button at least 1
second).
2
3
[DISP] button
To change display item (press the button).
8
9
[
4
] / [
¢] buttons
[Volume] knob
To select a station and song. (press the button).
To adjust volume (turn the knob).
To select menu setting item (turn and press the
details.
[
38] button
To start or interrupt playback for audio file and
iPod. (press the button).
KIV-BT901 : To display Play mode in the Menu List
(press the knob at least 1 second).
KIV-701 : To make a voice dialing call (press the
To select the remove mode, and remove the USB
device or an iPod (press the button at least 2
seconds or more).
10 [SCRL] button
Scrolls the display text (press the button).
4
5
[SEARCH MODE] button
11 Display window
To enter Search mode (iPod), move between
folders (Audio file), etc. For more details, see
operations of each source described in page 6
or later.
12 KIV-BT901: [ ] button
To enter Bluetooth mode (press the button).
To enter Bluetooth easy pairing mode (press
the button at least 1 second). See <Easy pairing
Microphone (KIV-BT901)
The microphone for hands free phone is
supplied.
When your voice cannot be recognized due
to the low microphone volume or noises in
the vehicle, adjust the microphone settings by
KIV-701: [iPod] button
To select iPod source (press the button).
To enter Bluetooth mode (press the button at
least 1 second). *1
13 USB Terminal
A USB device or an iPod can be connected.
6
Auxiliary Input Terminal
Portable audio device can be connected with the
⁄
mini-plug (3.5 mm ø).
*1 Only with KCA-BT300/BT200 (optional accessory)
connected.
•
Use the mini-plug cable which is stereo type and does
not have any resistance.
|
4
KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operation
Exit of the Demonstration Mode
Menu List Operation
Turn off the demonstration mode when you use it
for the first time after installation.
The basic operating procedure for using this
function is described below. The individual function
items are covered in the operating procedures.
1
Press the [Volume] knob to quit the
demonstration mode when the message “To
Cancel DEMO Press the volume knob” is displayed
(approx. 15 seconds).
1
Select the source
Press the [SRC] button repeatedly also switches
source.
Function items vary from source to source. For a list
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
2
Turn the [Volume] knob to select “YES” and then
press the [Volume] knob.
Power and Source Select
Turns the power ON by pressing the [SRC]
button.
2
3
Enter Menu List mode
Press the [MENU] button.
When the power is ON, select a source.
• SRC Select mode 1: Pressing the [SRC] button
each time switches between sources.
Tuner (“ TUNER” or “ HD RADIO”) ➜ USB
(“ USB”), iPod (“ iPod”) or Zune (“ Zune”)
➜ Pandora (“ Pandora”) ➜ Internal Memory
(“ Int.Mem.”) ➜ Auxiliary Input (“ AUX”) ➜
Standby (“ STANDBY”)
• SRC Select mode 2: Press the [SRC] button and
then turn the [Volume] knob. To determine the
selected source, press the [Volume] knob.
Keeping pressing the [SRC] button for at least 1
second turns the power OFF.
Select the setting item
Turn the [Volume] knob and press it when the
desired item is displayed.
Repeat the operation until your desired setup item
is selected.
✍ Press the [MENU] button to return to the
previous item.
Operation example:
4
[Volume]
1[Volume]
2
4
3
2
Music
3
2
Playlists
My
Best 25
1
1
Artists
Albums
[MENU]
3[MENU]
⁄
Videos
Play Mode
•
•
•
•
•
The SRC Select mode can be set in “Source Select” of <Initial
1 sec.
Auxiliary input source is initially set to “OFF”. Set “Built in
To use the Pandora source, set “Pandora Source” in <Initial
When an optional accessory is connected, the source name
for each device appears.
In this manual, the above selection is indicated as
Select “Music” > “Playlists” > “My Best 25”.
4
5
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
When connection of the iPod or Zune is recognized, the
source display changes from “USB” to “iPod”, “Zune”.
Exit Menu Setting mode
Press the [MENU] button for at least 1 second to
return to the first hierarchy.
Press the [MENU] button in the first hierarchy to
exit the Menu List mode.
Volume
Turning the [Volume] knob adjusts the sound
volume.
English
|
5
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod/iPhone Operation
SRC MENU Volume
DISP
SEARCH MODE
KCA-iP202 (optional
accessory) is required
to connect an iPod.
(Do not use extension
cables.)
KIV-701
iPod
4
38
¢
SCRL
USB Device select
iPod may not be recognized when USB HUB is used.
Switch to the device to be connected.
Basic Operation
Playing iPod
1. Enter Menu List mode
Press the [MENU] button.
• Connect an iPod
When connected, the source is switched
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “Port Up”.
Repeat these steps to switch to the device to
be connected.
automatically and a song starts playing.
• Select iPod source
Press the [SRC] button repeatedly also
switches source.
Select the “ iPod” display.
⁄
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
•
For more details on USB HUB, see <About USB hub>
Switching display
Song Select
Press the [DISP] button to select display mode.
Selects the Artwork small, Artwork large, Video or
Clock.
Press the [4] or [¢] button.
✍ This unit cannot be operated for a few seconds
while reading Artwork after selecting a song.
✍ The Video mode is displayed only when you
have applied the parking brake.
Fast Forwards or Fast Backwards
Hold down the [4] or [¢] button.
Display example of Artwork small mode
Pause and Play
Press the [38] button to pause or resume
playback.
3
1
Remove iPod
4
Press the [38] button for at least 2 seconds.
The unit enters the USB REMOVE mode (“USB
REMOVE” is displayed), and the iPod can be
removed safely.
2
5
2 Play time and play time bar
3 Browse item
4 Album art
iPod control by Hand mode
KIV-701
Press the [iPod] button.
When set to “ON”, allows you to operate iPod with
the control on the iPod.
KIV-BT901
The setting of “iPod By Hand Mode” in <Play Mode>
|
6
KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Cancelling the Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Selecting a Song by Browsing iPod
Display
Items
“Music”
⁄
“Playlists”
“Artists”
Playlists
Artists
•
The unit memorizes the position where you have found a
song in the Search mode. When you enter the Menu List
mode after searching a song, the memorized position is
displayed. Press the [MENU] button for at least 1 second to
move to the first hierarchy, select a Menu item, and set it’s
parameters.
“Albums”
“Songs”
Albums
Songs
“Podcasts”
“Genres”
Podcasts
Genres
•
Characters which cannot be displayed are left blank. If non
of the characters can be displayed, the browse item name
and digits are displayed.
“Composers”
“Audiobooks”
Composers
Audio books
“Videos”*1
Items
Playlists
Artists
Albums
Songs
Display
“PLIST***” Podcasts
“ART***”
“ALB***”
“PRGM***”
Items
Display
“Video Playlists” Video Playlists
“Movies” Movies
“Music Videos” Music Videos
“TV Shows” TV Shows
“Video Podcasts” Video Podcasts
“Rentals” Rentals
“PDCT***”
“GEN***”
“COM***”
Genres
Composers
“CAT***”, “LIST***”, or “PRGM***” may be displayed
depending on the hierarchy of Video files folders.
*1 Name and number of items displayed in “Videos” are the
same as the iPod.
1
Select iPod source
Press the [SRC] button repeatedly also switches
source.
Select the “ iPod” display.
2
3
Enter Menu List mode
Press the [MENU] button.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Music” or “Videos”.
4
Select a song
Operation type
Move between items
Select an item
Operation
Turn the [Volume] knob.
Press the [Volume] knob.
Page up or down
Press the [DISP] or [SCRL] button.
Press the [DISP] or [SCRL] button for at
least 1 second to continuously scroll. Press
the button again to stop scrolling.
Press the [MENU] button.
Return to previous item
Return to Top menu
Press the [MENU] button for at least 1
second.
✍ For example: Searching by Artist name.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Music” > “Artists” > Artist name > Album
name > Song title
English
|
7
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod/iPhone Operation
•
If the browse item is changed to search for music while
the all random function is on, the all random function is
turned off and the songs in the browse item are played
at random.
Play Mode
You can select a Play Mode, such as Random play
and Repeat play.
• iPod By Hand Mode (iPod Control by Hand Mode)
Allows you to operate iPod with the control on the iPod.
1
Select iPod source
Press the [SRC] button repeatedly also switches
source.
Select the “ iPod” display.
⁄
•
In the iPod Control by Hand Mode, controllable
functions of iPod using this unit are those described in
<Basic Operation>.
2
Enter Play Mode in the Menu List
KIV-BT901: Press the [Volume] knob for at least
1 second.
✍ You can also select from “Play Mode” in Menu
List mode.
•
•
•
This mode is not compatible with music information
display. The display will show “iPod By Hand Mode”.
iPod can be operated when it conforms to the iPod
control function.
When you cancel the hand mode while playing a video
file, the video file stops and a music file starts.
KIV-701:
1. Press the [MENU] button.
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “Play Mode”.
iPod Setting
You can select following iPod Setting items.
3
Select the Play Mode
Turn the [Volume] knob and press it when the
desired item is displayed.
1
Select iPod source
Press the [SRC] button repeatedly also switches
source.
Select the “ iPod” display.
Display
Overview
“Play Mode”
2
3
Enter Menu List mode
Press the [MENU] button.
“iPod By Hand When set to“ON”, allows you to operate iPod
Mode”
with the control on the iPod.
On “”/ Off “”
Turn the [Volume] knob and press it when the
desired item is displayed.
“Folder Random” When set to“ON”, plays the music in the folder
randomly. (Music only)
Select “Settings”.
On “”/ Off “”
“All Random”
“File Repeat”
When set to“ON”, plays all songs in iPod
randomly. (Music only)
On “”/ Off “”
When set to“ON”, plays the music repeatedly.
On “”/ Off “”
4
Select the setting item
Turn the [Volume] knob and press it when the
desired item is displayed.
Display
Overview
(
: Factory setting)
“Settings”
“Skip Search”
Sets the ratio of skip performed with <Skip
“0.5%”/ “1%”/ “5%”/ “10%”
4
5
Make a setting
Press the [Volume] knob.
Exit Menu List mode
Press the [MENU] button for at least 1 second,
“Device F/W
Version”
Display the version of the firmware of this unit.
and then press it again briefly.
“Delete My
Playlist”
Deletes the registered My Playlist.
operation.
“Delete One”/ “Delete All” ➜ “YES”/ “NO”
Sets the audio book playback speed.
“Slower”/ “Normal”/ “Faster”
Remarks
• All Random
•
The time required to turn on the all random function
“Audiobook
Speed”
may become longer depending on the number of songs
in iPod.
“Sound Check” Sets the sound volume of all songs to the same
•
Turning on the all random function changes the iPod
browse item to “Songs”. This browse item will not be
changed even if the all random function is turned off.
level. The sound volume adjustment is required
using iTunes.
“ON”/ “OFF”
(
: Factory setting)
|
8
KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
2
Enter Search mode
Press the [SEARCH MODE] button.
✍ The search mode you can select changes
depending on normal playback or browsing. For
browsing operation, see <Selecting a Song by
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
3
4
Select the Search mode
Turn the [Volume] knob.
⁄
•
The setting of “Skip Search” in <iPod Setting> (page 8)
Changing the setting of one reflects the other.
Start the search mode
Press the [Volume] knob.
Cancelling Search mode
Selecting the Search Mode
Press the [SEARCH MODE ] button.
You can select the most suited search method for
the desired song.
Search mode in Normal playing
Display
Overview
“Direct Search”
You can quickly search the desired song by
specifying its Search item (artist, album, etc.)
and character.
Searches for music of the same artist or genre
as the one being played. (Music only)
Registers a song to My Playlist and play it.
“Related Search”
“Recall My Playlist”
“Delete My Playlist”
“Register My Playlist”
Search mode in Browsing
Display
Overview
“Direct Search”
You can quickly search the desired song by
specifying its Search item (artist, album, etc.)
and character.
You can select an alphabetic character from
the list in the browse item (artist, album, etc.)
selected now.
The number of songs to be skipped is
determined by the ratio of the total number of
songs in the list which is selected now.
“Alphabet Search”
“Skip Search”
“Register My Playlist” Registers a song to My Playlist.
1
Select iPod source
Press the [SRC] button repeatedly also switches
source.
Select the “ iPod” display.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
English
|
9
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod/iPhone Operation
Direct Search
⁄
•
Characters that can be entered are alphabetical characters
You can quickly search the desired song by
specifying its Search item (artist, album, etc.) and
character.
(A to Z), numerical characters (0 to 9), and “ * ”.
“ * ” indicates characters other than alphabetical and
numerical characters. You cannot enter any more characters
when entering “ * ” in the first character position.
If the first character string begins with an article “a”, “an”, or
“the” in the Direct Search mode, it is searched for in defiance
of the article.
•
1
Select iPod source
Press the [SRC] button repeatedly also switches
source.
Select the “ iPod” display.
•
2
3
Enter Search mode
Press the [SEARCH MODE] button.
Related Search
Searches for music of the same artist or genre as the
one being played. (Music only)
Enter Direct Search mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Direct Search”.
1
2
3
Play the music in iPod
Press the [SEARCH MODE] button.
4
Select the browse item
Turn the [Volume] knob and press it when the
desired browse item is selected.
Enter Related Search mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Display
“Music”
Items
Display
“Videos”*1
Items
Select “Related Search”.
4
Select the browse item
Turn the [Volume] knob and press it when the
desired browse item is selected.
“Playlists”
“Artists”
Playlists
Artists
“Video
Playlists”
“Movies”
Video Playlists
Movies
“Music Videos” Music Videos
“TV Shows” TV Shows
“Albums”
“Songs”
Albums
Songs
Display
Browses music
“Podcasts”
“Genres”
Podcasts
Genres
“Search Artist”
“Search Album”
Displays the album of the same artist.
Displays music in the album in which the one
being played is included.
“Video
Podcasts”
“Rentals”
Video Podcasts
“Composers” Composers
“Audiobooks” Audio books
Rentals
“Search Genre”
Displays the artist of the same genre.
“Search Composer” Displays the album including music created by the
same composer.
*1 Name and number of items displayed in “Videos” are the
same as the iPod.
After this step, you need to browse. See step 4 of
select a song.
5
6
Select the character to be searched for
Operation type
Operation
Move between items
Select an item
Turn the [Volume] knob.
Press the [Volume] knob.
Cancelling the Related Search
Press the [SEARCH MODE] button.
Move to the next column
Press the [4] or [¢] button.
⁄
Up to 3 characters can be entered.
•
Related search cannot be performed while playing the
video file.
Determine the selected character
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “DONE”.
•
When the music being played has no information on
browsing items or no music was found, “Not Found” is
displayed.
Start search. When the search is completed,
the music search mode is selected again at the
selected character position.
After this step, you need to browse. See step 4 of
select a song.
Cancelling the Direct Search
Press the [SEARCH MODE] button.
|
10 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Alphabet Search
Skip Search
You can select a song by alphabet. This function
searches songs whose name contain the specified
character(s) in the list of the selected Search item
(artist, album, etc).
You can scroll up or down according to the number
of the selected Search items so that you can quickly
switch the display position.
1
Select iPod source
Press the [SRC] button repeatedly also switches
1
Select iPod source
Press the [SRC] button repeatedly also switches
source.
source.
Select the “ iPod” display.
Select the “ iPod” display.
2
Enter browsing mode
Press the [MENU] button.
2
Enter browsing mode
Press the [MENU] button.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Music” or “Videos” > category > brows
item.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Music” or “Videos” > category > brows
item.
3
4
Enter Skip Search mode
3
4
Enter Alphabet Search mode
Press the [SEARCH MODE] button.
Turn the [Volume] knob and press it when the
desired item is displayed.
Press the [SEARCH MODE] button.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Skip Search”.
Select “Alphabet Search”.
Search for item
Search for item
Operation type
Move between items
Select an item
Operation
Turn the [Volume] knob.
Press the [Volume] knob.
Press the [DISP] or [SCRL] button.
Keep pressing the button for 3 seconds or
longer skips songs at 10% irrespective of
the setting.
Operation type
Select the character
Move between items
Select an item
Operation
Press the [DISP] or [SCRL] button.
Turn the [Volume] knob.
Press the [Volume] knob.
Press the [MENU] button.
Skip Search
Return to previous item
Sets the ratio of skip
performed
Return to previous item
Press the [
4] or [¢] button.
Cancelling the Alphabet Search
Press the [SEARCH MODE] button.
Press the [MENU] button.
⁄
•
The time of search by alphabet may become long
depending on the number of songs or items in iPod.
If the first character string begins with an article “a”, “an”,
or “the” in the Alphabet Search mode, it is searched for in
defiance of the article.
Cancelling the Skip Search
Press the [SEARCH MODE] button.
•
⁄
•
English
|
11
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod/iPhone Operation
Deleting a Song from the Playlist
My Playlist
1
2
Press the [SEARCH MODE] button.
Allows you to register your favorite songs in the
Playlist of this unit. You can register up to 30 songs
in the Playlist.
Enter Delete Playlist mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Delete My Playlist”.
Registering Songs in the Playlist
1
2
Play the song you want to register
3
Turn the [Volume] knob and press it when the
desired item is displayed.
Press the [SEARCH MODE] button.
Select ”Delete One” or ”Delete All”.
Selecting “Delete All” moves to step 5 and all songs
are deleted.
3
Register the song
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Register My Playlist”.
“## Stored (Registration number)” is displayed.
4
5
Turn the [Volume] knob and press it when the
desired item is displayed.
Select the song you want to delete.
⁄
•
Make a Playlist from the songs stored in one iPod. If you
attempt to register a song stored in a different iPod, ”No
Information” appears and then ”ALL Delete?” appears.
Select “YES” to delete the Playlist when you want to
remake it.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select ”YES”.
“Completed” is displayed.
⁄
•
The song displayed in the Music Search mode can be
registered in the same manner. For how to use the music
search function, refer to <Selecting a Song by Browsing
•
You can also delete all songs from the Playlist by
selecting “Delete My Playlist” described in <iPod Setting>
•
•
If you attempt to register the 31st song, ”Memory Full”
appears and you cannot register it accordingly. To
register the song, delete an unnecessary song.
Do not register Podcasts. Songs you do not want to
register may be registered, or playback may not be
carried out correctly.
•
If you connect the different iPod from one registered to
My Playlist, “Delete One” and “Delete All” will not appear
and all songs be deleted.
Playing the Song in the Playlist
1
2
Press the [SEARCH MODE] button.
Enter My Playlist mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Recall My Playlist”.
3
Play the song in the Playlist
Turn the [Volume] knob and press it when the
desired item is displayed.
Select the song you want to play.
⁄
•
•
•
Turning ACC OFF or the power OFF cancels the My
Playlist mode.
The ending of a song may be cut unless the song has a
silence of 1 second or longer at the end.
Random play cannot be performed during playback of a
song in the Playlist.
|
12 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
English
|
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PANDORA® internet radio Operation
SRC MENU Volume
DISP
KCA-iP202 (optional
accessory) is required
to connect an iPhone.
(Do not use extension
cables.)
4
38
¢
SCRL
USB Device select
iPhone may not be recognized when USB HUB is
used. Switch to the device to be connected.
Basic Operation
Listening to PANDORA® internet radio
1. Enter Menu List mode
Press the [MENU] button.
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “Port Up”.
• Connect an iPhone
Connecting the iPhone with the Pandora
application running will switch the source
automatically to start broadcasting from the
registered station.
Repeat these steps to switch to the device to
be connected.
• Select Pandora source
Press the [SRC] button repeatedly also
switches source.
Select the “ Pandora” display.
✍ If the Pandora application is not running, “Check
Device” is displayed.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
⁄
•
For more details on USB HUB, see <About USB hub>
Switching display
Press the [DISP] button to select display mode.
Selects the Artwork small, Artwork large or Clock.
Display example of Artwork small mode
⁄
•
To use the Pandora source, set “Pandora Source” in
If no station has been selected, broadcasting does not
start.
1
•
3
Pause and Play
2
Press the [38] button to pause or resume
playback.
4
Thumbs up
2 Play time and play time bar
3 Album art
Press the [DISP] button for at least 1 second.
“
” is displayed.
4 Thumbs indicator
Thumbs down
Press the [SCRL] button for at least 1 second.
“
” is displayed. Skips the current song.
Station Search
Song skip
Press the [¢] button.
✍ If the skip count limit specified by Pandora is
exceeded, “No skips remaining” is displayed.
You can select the station you want to listen to from
your station list.
1
2
Select Pandora source
Enter Menu List mode
Press the [MENU] button.
Remove iPhone
Press the [38] button for at least 2 seconds.
The unit enters the USB REMOVE mode (“USB
REMOVE” is displayed), and the iPhone can be
removed safely.
|
14 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Stations” > “A-Z” (Stations are displayed
in alphabetical order) or “By Date” (Stations are
displayed in date order).
4
Select the character to be searched for
Operation type
Move between items
Select an item
Operation
Turn the [Volume] knob.
Press the [Volume] knob.
Move to the next column Press the [
Return to previous item Press the [MENU] button.
4] or [¢] button.
A station list is displayed.
4
5
Select a station
Turn the [Volume] knob and press it when the
desired item is displayed.
Up to 3 characters can be entered.
5
6
Determine the selected character
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “DONE”.
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Start search.
Select a station
Bookmark Registration
Operation type
Move between items
Select an item
Operation
Turn the [Volume] knob.
Press the [Volume] knob.
You can register the current song information or
artist information in Bookmark.
Cancelling the Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
1
2
Select Pandora source
Enter Menu List mode
Press the [MENU] button.
⁄
3
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Bookmarks” > “Bookmark Song” (to
register song information) or “Bookmark Artist”
(to register artist information).
•
Characters that can be entered are alphabetical
characters (A to Z), numerical characters (0 to 9), and
other symbols (“&”, “_”, “ ’ ”, “-”, “#”, “+”, “!”, “$”, “ " ”).
Deletion of Station
4
Exit Menu List mode
Press the [MENU] button for at least 1 second,
You can delete registered station information.
and then press it again briefly.
1
2
Select Pandora source
⁄
Enter Menu List mode
Press the [MENU] button.
•
This unit allows you to bookmark songs and/or artists in
your personalized PANDORA® account. The bookmarks
will not be available for review on the unit but will be
available in your PANDORA® account.
3
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Station Delete” > “A-Z” (Stations are
displayed in alphabetical order) or “By Date”
(Stations are displayed in date order).
Search and New Station Registration
You can search for the desired station by specifying
its character. You can register the displayed station
as a new station.
4
5
Turn the [Volume] knob and press it when the
desired item is displayed.
Select the station you want to delete.
1
2
Select Pandora source
Turn the [Volume] knob and press it when the
desired item is displayed.
Select ”YES”.
Enter Menu List mode
Press the [MENU] button.
“Completed” is displayed.
3
Turn the [Volume] knob and press it when the
desired item is displayed.
Cancelling the Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Select “New Stations”.
English
|
15
Download from Www.Somanuals.com. All Manuals Search And Download.
USB device/ Zune/ Internal Memory Operation
When connecting the
USB device, usage of the
CA-U1EX (500 mA Max:
option) is recommended.
SEARCH MODE
SRC MENU Volume
DISP
4
38
¢
SCRL
Multi card reader Drive Search
Selecting the device inserted in the Multi Card
Reader.
Basic Operation
Playing USB device
• Connect a USB device
When connected, the source is switched
automatically and a song starts playing.
1. Enter Menu List mode
Press the [MENU] button.
2. Select a drive
Turn the [Volume] knob and press it when
the desired item is displayed.
Select “Drive Select” > “Drive#”.
• Select USB/ Zune/ Internal memory source
Press the [SRC] button repeatedly also
switches source.
Select the “ USB”, “ Zune” or “ Int.Mem.”
display.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
Switching display
Press the [DISP] button to select display mode.
Selects the Artwork small, Artwork large, Video or
Clock.
✍ The Video mode is displayed only when you
have applied the parking brake.
Moving to the next folder (Except for Music
Editor media or Zune)
Press the [SEARCH MODE] button.
Display example of Artwork small mode
Song Select
Press the [4] or [¢] button.
1
4
Fast Forwards or Fast Backwards
Hold down the [4] or [¢] button.
2
3
Pause and Play
5
Press the [38] button to pause or resume
playback.
2 Play time and file number
3 File format indicator
4 Album art
Remove USB device
Press the [38] button for at least 2 seconds.
The unit enters the USB REMOVE mode (“USB
REMOVE” is displayed), and the USB device can be
removed safely.
About Internal Memory
USB Device select
Audio files, Video files or Picture files can be stored
by copying from a USB device.
• Built-in flash memory: 512 MB
USB device may not be recognized when USB HUB
is used. Switch to the device to be connected.
1. Enter Menu List mode
Press the [MENU] button.
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “Port Up”.
Repeat these steps to switch to the device to
be connected.
|
16 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
✍ For example: Searching for ¡".
Turn the [Volume] knob and press it when the
desired item is displayed.
File Search
Selecting the file you want to listen to from the
device being played now.
Select “USB List” > 1 > 2 > ¡"
USB device/ Internal memory source
1
2
Display
Items
¡"
¡!
¡#
“USB List”/
“Internal Memory
List”
Folder or file name list.
Cancelling the Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Music Editor media
Display
Items
⁄
“Music”
“Playlists”
“Artists”
“Albums”
“Songs”
“Genres”
•
When you search a song in the File Search mode, the unit
memorizes the position of the song being played after the
search. To set a different Menu item after searching a song,
press the [MENU] button for at least 1 second to move to
the first hierarchy.
Playlists
Artists
Albums
Songs
Genres
Remarks
• Displaying picture files
The playback of audio file continues even when a picture
file is selected during playback. Pressing the [4] or [¢]
button switches between picture files.
Zune
Display
“Music”
“Genres”
Items
Genres
Artists
Albums
Songs
“Artists”
“Albums”
“Songs”
“Playlists”
Playlists
1
2
Select USB/ Zune/ Internal memory source
Enter Menu List mode
Press the [MENU] button.
3
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “USB List”, “Internal Memory List” or
“Music”.
4
Select a file
Operation type
Move between items
Select an item
Operation
Turn the [Volume] knob.
Press the [Volume] knob.
Page up or down
Press the [DISP] or [SCRL] button.
Press the [DISP] or [SCRL] button for at
least 1 second to continuously scroll. Press
the button again to stop scrolling.
Press the [MENU] button.
Return to previous item
Return to Top menu
Press the [MENU] button for at least 1
second.
English
|
17
Download from Www.Somanuals.com. All Manuals Search And Download.
USB device/ Zune/ Internal Memory Operation
Function of Zune/ Music Editor media
Play Mode
Skip Search
You can select a Play Mode, such as Random play
and Repeat play.
You can scroll up or down according to the number
of the selected Search items so that you can quickly
switch the display position.
1
2
Select USB/ Zune/ Internal memory source
Enter Play Mode in the Menu List
KIV-BT901: Press the [Volume] knob for at least
1 second.
1
2
Select USB or Zune source
Enter File Search mode
Press the [MENU] button.
✍ You can also select from “Play Mode” in Menu
List mode.
KIV-701:
Turn the [Volume] knob and press it when the
desired item is displayed.
1. Press the [MENU] button.
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “Play Mode”.
Select “Music” > item.
3
4
Enter Skip Search mode
Press the [SEARCH MODE] button.
Search for item
3
Select the setting item
Turn the [Volume] knob and press it when the
desired item is displayed.
Operation type
Move between items
Select an item
Operation
Turn the [Volume] knob.
Press the [Volume] knob.
Press the [DISP] or [SCRL] button.
Keep pressing the button for 3 seconds or
longer skips songs at 10% irrespective of
the setting.
Display
Overview
Skip Search
“Play Mode”
“File Scan”
When set to“ON”, plays the intro of the music in
the folder successively.
On “”/ Off “”
“Folder Random” When set to“ON”, plays the music in the folder
Sets the ratio of skip
performed
Press the [
4] or [¢] button.
randomly.
Return to previous item
Press the [MENU] button.
On “”/ Off “”
“All Random”*1 When set to“ON”, plays all songs in USB device
randomly.
After this step, see step 4 of <File Search> (page 17)
to select a song.
On “”/ Off “”
When set to“ON”, plays the music repeatedly.
Cancelling the Skip Search
Press the [SEARCH MODE] button.
“File Repeat”
On “”/ Off “”
“Folder Repeat”*1 When set to“ON”, plays the music in the folder
⁄
repeatedly.
•
On “”/ Off “”
(
: Factory setting)
*1 Not selectable when Music Editor media or Zune is used.
4
5
Make a setting
Press the [Volume] knob.
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
|
18 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Function of remote control
USB Setting
Direct Music Search
You can select following USB Setting items.
Searching the music by entering the file number.
1
2
Select USB source
1
2
3
Enter Direct Music Search mode
Press the [DIRECT] button on the remote
control.
Enter Menu List mode
Press the [MENU] button.
3
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Settings”.
Enter the music number
Press the number buttons on the remote
control.
4
Select the setting item
Turn the [Volume] knob and press it when the
desired item is displayed.
Search the music
Press the [4] or [¢] button.
Cancelling Direct Music Search
Press the [DIRECT] button.
Display
“Settings”
Overview
⁄
•
Direct Music Search cannot be performed during playing of
Zune/ “Music Editor” media, Random play, or scan play.
“0.5%”/ “1%”/ “5%”/ “10%”
“Device F/W
Version”
Display the version of the firmware of this unit.
“Device F/W
Update”
Updates the firmware. The update information
will be posted on the following URL as necessary.
(
: Factory setting)
*1 Selectable when Music Editor media or Zune is used.
5
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
•
The setting of “Skip Search” in <iPod Setting> (page 8)
Changing the setting of one reflects the other.
English
|
19
Download from Www.Somanuals.com. All Manuals Search And Download.
USB device/ Zune/ Internal Memory Operation
Function of USB source
7
Exit Copy mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “EXIT”.
Copying from USB device
Copy files and folders from USB device to internal
memory.
Returns to step 3 if “NEXT” is selected.
USB
(
]
)
(
]
Int Mem)
¡File1
Folder4
⁄
¡File1
^
•
If a folder is selected, the files in the folder are copied.
Sub folders are not copied.
]
]
¡
¡
•
If there is a file or folder with the same name, a message
is displayed. If you select “OK”, a number is added as
“Name_001”.
¡
]
Folder4
•
If there is not enough space for the selected files or
folders, “MEMORY OVER” is displayed. Reduce the number
of files to copy or erase unnecessary files in the USB
memory.
If copying is canceled or if space runs out while copying,
the files copied up to that point remain.
The displayed space is a rough estimate. The actual size
may be smaller or greater.
Audio files with DRM can be copied, but cannot be
played.
Depending on the digital audio player, it may not be
able to copy files.
When files are copied from Music Editor media, the
copied audio files are played as normal audio file. Song
selection using the Music Editor media function is not
possible.
Files may be lost if the engine is started while copying.
Copy with the engine running.
The file in the internal memory cannot be copied to
another media.
If a Hands-Free phone call is received while copying files
from the USB device, the copying stops.
Only the following controls can be used while copying,
or erasing:
¡
]
^
:
An empty folder
¡
1
Select USB source
Press the [SRC] button repeatedly also switches
source.
Select the “ USB” display.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
•
•
•
•
•
2
3
Enter Menu List mode
Press the [MENU] button.
Enter Copy mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Copy from USB”.
•
•
•
4
Select a file or folder to copy
•
•
Operation type
Move between items
Select an item
Operation
Turn the [Volume] knob.
Press the [Volume] knob.
- Volume
- Attenuator
- Power off
High Speed Search
Return to previous item
Return to Top menu
Press the [DISP] or [SCRL] button.
Press the [MENU] button.
Press the [MENU] button for at least 1
second, and then press it again briefly.
When copying is interrupted
If ACC is turned off while copying, a screen to
confirm whether to continue copying appears next
time ACC is turned on (Resume function).
5
6
Determine the selected file or folder
Press the [Volume] knob for at least 3 seconds.
Start copy
1
2
3
When “Continue USB Copy?” is displayed.
Turn on the engine and then select “YES”.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “OK”.
“Completed” is displayed when copying completes.
✍ Cancelling copy
Press the [Volume] knob.
Copying resumes.
1. Press the [Volume] knob.
2. Turn the [Volume] knob and press it when
the desired item is displayed. Select “YES”.
|
20 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Function of Internal memory source
Deleting file or folder
Deleting Files in Memory
1
2
Select Internal memory source
Deleting Files in Memory.
Enter Menu List mode
Press the [MENU] button.
Display
Items
“Settings”
3
Enter Delete mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Settings” > “Internal Memory Delete”.
“Internal Memory Delete a folder or file.
Delete”
“Internal Memory Perform format to delete all files stored in
Format”
internal memory.
4
Select a file or folder to delete
Internal Memory Format
Operation type
Move between items
Select an item
High Speed Search
Return to previous item
Return to Top menu
Operation
Turn the [Volume] knob.
Press the [Volume] knob.
Press the [DISP] or [SCRL] button.
Press the [MENU] button.
1
Select Internal memory source
Press the [SRC] button repeatedly also switches
source.
Select the “ Int.Mem.” display.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
Press the [MENU] button for at least 1
second, and then press it again briefly.
5
6
Determine the selected file or folder
Press the [Volume] knob for at least 3 seconds.
2
3
Enter Menu List mode
Press the [MENU] button.
Start deleting
Enter Internal memory Format mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “OK”.
Select “Settings” > “Internal Memory Format”.
”Completed” is displayed when deleting completes.
✍ Canceling delete
4
5
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “YES”.
1. Press the [Volume] knob.
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “YES”.
”Completed” is displayed when deleting completes.
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
7
Exit Delete mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “EXIT”.
Returns to step 4 if “NEXT” is selected.
English
|
21
Download from Www.Somanuals.com. All Manuals Search And Download.
USB device/ Zune/ Internal Memory Operation
Function of USB or Internal memory source
Function of USB or Internal memory source
Picture File Viewing
Wallpaper Downloading
You can select and view a picture file in the device.
You can use downloaded picture for the display of
this unit.
1
2
Select USB or Internal memory source
1
Connect the USB device
Connect the USB device containing the files to be
Select a picture file
downloaded into this unit.
✍ A picture file can be downloaded from Internal
memory.
to be displayed.
1. Press the [MENU] button.
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “USB List” or “Internal Memory List”
> folder > picture file.
2
Select files to be downloaded
file to be downloaded.
1. Press the [MENU] button.
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “USB List” or “Internal Memory List”
> folder > picture file.
To select a file
Press the [4] or [¢] button.
Slide show
1
Enter Menu List mode
Press the [MENU] button.
3
Enter Menu List mode
Press the [MENU] button.
✍ If the first hierarchy is displayed at this step, skip
✍ If the first hierarchy is displayed at this step, skip
step 2 and proceed to step 3.
2
3
Press the [MENU] button for at least 1 second to
move to the first hierarchy.
step 4 and proceed to step 5.
4
5
Press the [MENU] button for at least 1 second to
move to the first hierarchy.
Select the slide show
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Slide” > “START” or “STOP”.
Start downloading
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Save as Wallpaper”.
When the downloading finishes, “Completed” is
displayed.
4
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Cancelling the picture file
Press the [DISP] button.
⁄
Setting the downloaded picture as wallpaper
Press [DISP] button to select Artwork small
mode.
•
The playback of audio file continues even when a picture
file is selected during playback Cancel your picture file
viewing to operate audio files.
•
•
If picture files are started to play while playing a video file,
the video play stops.
The Slide show is displayed only when you have applied the
parking brake.
Set “Graphic Select” in <Customization of
⁄
•
A wallpaper (picture file) cannot be downloaded during the
slide show. Cancel the slide show, and then download a
wallpaper.
•
When a new wallpaper is downloaded, it will overwrite the
currently downloaded wallpaper. There is no way to delete
the downloaded pictures.
|
22 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
English
|
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Changer Control (Optional)
Play Mode
SEARCH MODE
DISP
SRC MENU Volume
You can select a Play Mode, such as Random play
and Repeat play.
1
2
Select CD changer source
Enter Play Mode in the Menu List
KIV-BT901: Press the [Volume] knob for at least
1 second.
4
38
¢
SCRL
KIV-701:
1. Press the [MENU] button.
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “Play Mode”.
Basic Operation
Select CD changer source
Press the [SRC] button repeatedly also switches
source.
3
Select the setting item
Turn the [Volume] knob and press it when the
desired item is displayed.
Select the “ CD CH” display.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
Display
Overview
“Play Mode”
“Track Scan”
Moving to the next disc
Press the [SEARCH MODE] button.
When set to“ON”, plays the intro of the music on
the disc successively.
On “”/ Off “”
“Disc Random” When set to“ON”, plays the music on the disc
Song Select
Press the [4] or [¢] button.
randomly.
On “”/ Off “”
Fast Forwards or Fast Backwards
“Magazine
Random”
When set to“ON”, plays the music in the disc
changer randomly.
On “”/ Off “”
Hold down the [4] or [¢] button.
Pause and Play
Press the [38] button to pause or resume
playback.
“Track Repeat” When set to“ON”, plays the music repeatedly.
On “”/ Off “”
“Disc Repeat”
When set to“ON”, plays the music on the disc
repeatedly.
Switching display
Press the [DISP] button to select display mode.
Selects the Information or Clock.
On “”/ Off “”
(
: Factory setting)
Display example of information display mode
4
5
Make a setting
Press the [Volume] knob.
Exit Menu List mode
Press the [MENU] button for at least 1 second,
1
and then press it again briefly.
2
3
2 Play time and track number
|
24 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Function of remote control
Direct Music Search
Searching the music by entering the track number.
1
2
3
Enter Direct Music Search mode
Press the [DIRECT] button on the remote
control.
Enter the music number
Press the number buttons on the remote
control.
Search the music
Press the [4] or [¢] button.
Cancelling Direct Music Search
Press the [DIRECT] button.
⁄
•
Direct Music Search cannot be performed during playing of
Random play or scan play.
Function of disc changer with remote control
Direct Disc Search
Searching the disc by entering the disc number.
1
2
3
Enter Direct Disc Search mode
Press the [DIRECT] button on the remote
control.
Enter the disc number
Press the number buttons on the remote
control.
Search the disc
Press the [FM+] or [AM–] button.
Cancelling Direct Disc Search
Press the [DIRECT] button.
⁄
•
Direct Disc Search cannot be performed during Random
play or scan play.
•
Input “0” to select disc 10.
English
|
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Operation
Tuner Setting
SRC MENU
DISP SEARCH MODE
Volume
You can select following Tuner Setting items.
1
2
Select Tuner source
Enter Menu List mode
Press the [MENU] button.
3
Turn the [Volume] knob and press it when the
desired item is displayed.
4
¢
Select “Settings”.
Basic Operation
4
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Selecting Tuner source
Press the [SRC] button repeatedly also switches
source.
Display
Overview
Select the “ TUNER” display.
“Settings”
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
“Seek Mode”
Selects the tuning mode of the radio.
“Auto1”: Automatic search for a station.
“Auto2”: Search in order of the stations in the
Preset memory.
Selecting the Receiving Band
1. Enter Menu List mode
“Manual”: Normal manual tuning control.
“Auto Memory” Memorizes 18 (FM) or 6 (AM) stations with
good reception automatically.
Press the [MENU] button.
“YES”/ “NO”
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “FM” or “AM”.
“TI”
Switches to the traffic information automatically
when the traffic bulletin starts.
“ON”/ “OFF”
“TAG Memory” Displays the tag memory usage of Radio Data
System station receiver. Up to 50 tags can be
registered to this unit.
Selecting the Receiving station
Press the [4] or [¢] button.
✍ Details of the station selecting in operation are
set in the “Seek Mode” of <Tuner Setting> (page
26).
“##/50”
“Tagging”
Turns ON / OFF the tag memory function of
Radio Data System station receiver.
”ON”/ “OFF”
Switching display
Press the [DISP] button to select display mode.
Selects the Information or Clock.
“Forced MONO” Reduces the noise when stereo broadcasts are
received as monaural.
“ON”/ “OFF”
Display example of information display mode
(
: Factory setting)
5
6
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
1
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
2
Remarks
• Forced MONO
Strong electrical fields (such as from power lines) may
cause unstable sound quality when it is set to ON. In such
a situation, turn it OFF.
• “TI” (Traffic information)
Turns ON or OFF the Traffic Information function.
When the function is set to ON, “TI” indicator is ON.
If traffic bulletin starts when the function is ON,
|
26 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
“Traffic INFO” is displayed and traffic information is
received.
If the volume is adjusted during reception of traffic
information, the adjusted volume is memorized
automatically. The memorized volume will be applied next
time the Traffic Information function is turned ON.
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
1
2
3
Select the radio band you wish to store in the
preset memory
Enter Menu List mode
Press the [MENU] button.
Station Preset Memory
Putting a station in the memory.
Enter Auto Memory Entry mode
Turn the [Volume] knob and press it when the
desired item is displayed.
1
Select the radio band and tune in a desired
radio station you wish to store in the preset
memory
Select “Settings” > “Auto Memory”.
4
Open Auto Memory Entry
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “YES”.
When 18 stations (FM) or 6 stations (AM) that can
be received are put in the memory, auto memory
entry closes.
2
3
Enter Menu List mode
Press the [MENU] button.
Enter Preset Memory mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “List & Memory”.
4
Select the number to put in the memory
Turn the [Volume] knob and press it for at least
2 seconds when the desired item is displayed.
Select a preset number.
⁄
•
This setting can be made when “Type Normal” is selected
Display
“List & Memory”
“-1”
Overview
Preset Tuning
Preset number 1. (FM/ AM/ Mixed)
Preset number 2. (FM/ AM/ Mixed)
Recalling the stations in the memory.
“-2”
1
2
Select the radio band
“-6”
Preset number 6. (FM/ AM/ Mixed)
Preset number 18. (FM).
Select a desired station in the memory
Turn the [Volume] knob and press it when the
desired item is displayed.
“-18”
Select “List & Memory” > Preset number.
⁄
•
You can register up to 18 FM stations and 6 AM stations.
Selecting “Mixed” for “Tuner Preset Type” allows you to
register up to 6 stations including FM, AM, and another
Satellite Radio Tuner regardless of the selected source.
English
|
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Operation
Function of remote control
iTunes Tagging
Direct Access Tuning
Using an iTunes Tagging enabled Radio Data System
station receiver you can tag your music. When you
hear a song you enjoy on your local Radio Data
System station, you only have to press the [SEARCH
MODE] button. The song’s information will then be
saved on this unit. The saved songs will then show
up in a playlist called “Tagged” in iTunes the every
next time you sync your iPod to your computer. So
then you just need to click and then easily buy and
download the song you were tagging directly from
the Apple iTunes Music Store.
Tuning in a desired radio station by entering the
frequency.
1
2
Select the radio band
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
“– – – –” is displayed.
3
Enter the frequency
Press the number buttons on the remote
control.
Example:
1
Enter iTunes tagging mode
Press the [SEARCH MODE] button.
“
” will be displayed when song information
TAG
Desired frequency Press button
can be registered.
92.1 MHz (FM)
810 kHz (AM)
[9], [2], [1]
[8], [1], [0]
⁄
•
using this function.
Up to 50 TAGs (song’s information) can be registered to
this unit. When iPod is connected, the TAG information
registered to this unit is transferred to the connected
iPod.
4
Tune in to the entered frequency
Press the [4] or [¢] button.
•
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
•
The memory usage can be checked by selecting “TAG
|
28 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
PTY (Program Type)
Program Type Preset
Selecting the Program Type below and searching
for a station.
Putting the Program Type in the Preset button
memory and quick recall.
Program Type Display
Program Type Display
Presetting the Program Type
Speech
Music
News
“Speech”
“Music”
“News”
Soft
“Soft”
1
2
3
Select the Program Type to preset
Nostalgia
Jazz
“Nostalga”
“Jazz”
Information
Sports
Talk
“Inform”
“Sports”
“Talk”
Classical
R & B
“Classicl”
“R & B”
Enter Program Type Preset mode
Press the [SEARCH MODE] button.
Soft R & B
Language
“Soft R&B ”
“Language”
Select the number to put in the memory
Turn the [Volume] knob and press it for at least
2 seconds when the desired item is displayed.
Select the preset number.
Rock
“Rock”
Classic Rock
Adult Hits
Soft Rock
Top 40
Country
Oldies
“Cls Rock”
“Adlt Hit”
“Soft Rck”
“Top 40”
“Country”
“Oldies”
Religious Music “Rel Musc”
Religious Talk “Rel Talk”
Personality
Public
“Persnlty”
“Public”
Recalling the preset Program Type
College
Weather
“College”
“Weather”
1
2
3
Enter PTY mode
•
Speech and Music include the Program type shown
below.
Enter Program Type Preset mode
Press the [SEARCH MODE] button.
Speech: Items in the white letters.
Music: Items in the black letters.
Select a desired Program Type in the memory
Turn the [Volume] knob and press it when the
desired item is displayed.
1
2
Enter Menu List mode
Press the [MENU] button.
Select the preset number.
Select the FM band
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “FM”.
3
4
Enter Menu List mode
Press the [MENU] button.
Enter PTY mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “PTY Search”.
5
6
7
Select the Program Type
Turn the [Volume] knob.
Search for the selected Program Type station
Press the [4] or [¢] button.
Exit PTY mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
•
•
•
This function cannot be used during a traffic bulletin or
AM reception.
When the selected Program Type is not found, “No PTY”
is displayed. Select another Program Type.
The operation ends automatically if you do not operate
within 30 seconds.
English
|
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear view camera (Optional)
Rear view camera
SRC MENU Volume
Put the gearshift lever into reverse.
The rear view camera image is displayed.
Clearing the Rear View Camera Image
Press a button other than [Volume].
⁄
•
During hands-free conversation, the rear view camera
image is not displayed.
•
To display the rear view camera image after it is
canceled, put the gearshift lever into reverse again.
Getting Started
1
Select the Standby
Press the [SRC] button repeatedly also switches
source.
Select the “ STANDBY” display.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
2
3
Enter Menu List mode
Press the [MENU] button.
Enter Rear view camera setting mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Initial Settings” > “R-CAM Interruption”.
4
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
Display
Overview
“Initial Settings”
“R-CAM
Interruption”
Sets a method to switch to the rear view camera
video display.
“ON”: Switches to the rear view camera video
display when engaging the shift knob of car
to“Reverse”.
“OFF”: Rear view camera is not used.
“R-CAM Mirror” You can flip the left and right of the rear view
camera video display. Set to“ON”and the rear
view will be displayed left and right in mirror
image on the screen.
“ON”/ “OFF”
(
: Factory setting)
5
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
•
To use the rear view camera feature, connection of a
reverse sensor wire is required. Refer to <Connecting
|
30 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Function of KIV-701 with KCA-BT300/BT200 (Optional Accessory)
Bluetooth Audio Operation
Basic Operation
SRC
DISP
Volume
Selecting Bluetooth Audio source
Press the [SRC] button repeatedly also switches
source.
Select the “ BT AUD EXT” display.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
4
38
¢
Pause and play
Press the [38] button.
Connecting a Bluetooth Device
Before using the Bluetooth device, you need to
connect Bluetooth device to this unit.
Music Search
Press the [4] or [¢] button.
Pairing (Registering from Bluetooth devices)
To make your Bluetooth Audio player usable with
this unit, you need to register it (pairing).
Switching display
Press the [DISP] button to select display mode.
Selects the Information or Clock.
1
Turn on this unit
Press the [SRC] button.
Display example of information display mode
2
Start registering this unit by operating the
Bluetooth device
1
By operating the Bluetooth device, register the
audio player (pairing). Select “KCA-BT300”/ “KCA-
BT200” from the list of connected units.
3
4
Enter a PIN code
Input the PIN code (“0000”) in the Bluetooth
device.
Check that registration is complete on the
Bluetooth device.
✍ PIN code is set to “0000” as the default. You can
change this code. Refer to <Registering PIN
1 Song information*1
(Only with KCA-BT300 (optional accessory)
connected)
⁄
•
*1 If the Bluetooth Audio player supports AVRCP1.3
profile, these items can be displayed.
•
All or some of the operations above cannot be
performed if the Bluetooth audio player is not ready for
remote control.
By operating the Bluetooth device, start
Bluetooth connection.
•
•
Switching between Bluetooth audio sources does
not start or stop playback automatically. Perform the
operation for starting or stopping playback.
Some audio players cannot be controlled remotely or
reconnected after Bluetooth disconnection. Operate the
main unit of the audio player to connect Bluetooth.
⁄
•
If pairing does not succeed, try followings.
– Turn off the power of this unit and turn it back on. And
then try the pairing operation again.
– If other audio players have been registered, delete
them. And then try the pairing operation again. See
When registering from this unit, refer to <Registering
For details on the Bluetooth Audio player which can be
connected, see <About the Bluetooth Audio player> in
the instruction manual of the Bluetooth Unit.
•
•
English
|
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Function of KIV-BT901
KIV-701 with KCA-BT300/BT200 (Optional Accessory)
Operation of Hands-Free Phoning
KIV-701
SRC MENU Volume
DISP
The following 3 steps procedure is necessary.
Step 1. Pairing (Registering from Bluetooth
devices)
To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing).
1
2
Turn on this unit
Press the [SRC] button.
KIV-BT901
KIV-701
4
38
¢
iPod
Start registering this unit by operating the
Bluetooth device
By operating the Bluetooth device, register the
hands-free unit (pairing). Select “KCA-BT300”/ “KCA-
BT200” from the list of connected units.
Getting Started
Before use the cell-phone, you need to connect cell-
phone to this unit.
⁄
•
For details on the Bluetooth cell-phone with the hands-
3
Enter a PIN code
Input the PIN code (“0000”) in the Bluetooth
device.
KIV-BT901
Check that registration is complete on the
Bluetooth device.
✍ PIN code is set to “0000” as the default. You can
change this code. Refer to <Registering PIN
1
Enter easy pairing mode
Press the [ ] button for at least 1 second.
2
3
4
“Searching” is displayed.
Search for the Bluetooth device.
When search is completed, “Finished” is displayed.
4
By operating the Bluetooth device, start hands-
free connection.
Select a cell-phone name
Turn the [Volume] knob and press it when the
desired item is displayed.
Step 2. Connection
If you have registered 2 or more cell-phones, you
need to select one of them. For more details, see
When a cell-phone is connected, the “BT” indicator
is light up.
Input the PIN code
1. Turn the [Volume] knob and press it when
the desired item is displayed.
Select the digit.
2. Turn the [Volume] knob to select the
numbers, and then press the [Volume] knob.
Step 3. Hands-free phoning
You can do hand-free phoning when the
connection is made.
5
6
Transmit the PIN code
Press the [Volume] knob for at least 1 second.
If “Pairing Success” is displayed, registration is
completed.
When “Confirm Phone” is displayed, confirm
connection with a cell-phone operation.
⁄
•
When registering from this unit, refer to <Registering
The receiver is connected to a cell-phone, with
“HF Connect” displayed, and exits the easy
pairing mode.
⁄
•
|
32 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving a Call
Call Waiting
Answering a Phone Call
Press the [Volume] knob.
Answering Another Incoming Call with the
Current Call Suspended
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Answer”.
⁄
•
The following operations disconnect the line:
- Connect a USB device.
•
The name of the calling party is displayed if it has already
been registered in the Phone Book.
Answering another Incoming Call after
Terminating the Current Call
KIV-BT901: Press the [SRC] or [ ] button.
KIV-701: Press the [SRC] or [iPod] button.
Rejecting an Incoming Call
KIV-BT901: Press the [SRC] or [ ] button.
KIV-701: Press the [SRC] or [iPod] button.
Continuing the Current Call
Turn the [Volume] knob and press it when the
desired item is displayed.
During a Call
Select “Reject”.
Disconnecting a Call
KIV-BT901: Press the [SRC] or [ ] button.
KIV-701: Press the [SRC] or [iPod] button.
Answering the Waiting Call after Terminating
the Current Call
KIV-BT901: Press the [SRC] or [ ] button.
KIV-701: Press the [SRC] or [iPod] button.
Switching to the Private Mode
Press the [38] button.
Switching between the Current Call and Waiting
Call
Press the [Volume] knob.
Each pressing of this knob switches the calling
party.
Switches between Private talk (“PRIVATE”) and
Hands-free talk each time this button is pressed.
⁄
•
Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection.
If this happens, the source cannot be switched back to
the hands-free talk mode by operating this unit. Operate
your cell-phone to return to the hands-free talk mode.
Clearing the Disconnection Message
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
Adjusting the Voice Volume during a Call
Turn the [Volume] knob.
“HF Disconnect” disappears.
English
|
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Function of KIV-BT901
KIV-701 with KCA-BT300/BT200 (Optional Accessory)
Operation of Hands-Free Phoning
Making a Call
Calling a Number in the Phone Book
1
Enter Bluetooth mode
1
2
3
Enter Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
2
Select a dialing method
Turn the [Volume] knob and press it when the
desired item is displayed.
Select the Phone Book mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Phonebook”.
Display
Overview
“
“
Preset Call”
Phonebook”
Calling a number in the preset.
Selecting the character to be searched for the
phone book.
Select the character to be searched for
Operation type
Operation
Move to the next character. Turn the [Volume] knob.
“
“
“
“
“
Outgoing Calls” Calling a number in the outgoing call list.
Incoming Calls” Calling a number in the incoming call list.
Missed Calls” Calling a number in the missed calls list.
Number Dial” Making a call by entering phone number.
Voice Recognize” Make a Voice Dialing Call.
Determine the selected
character.
Press the [Volume] knob.
4
5
Select the name or phone number
Turn the [Volume] knob.
✍ Switching between Display Modes
Press the [DISP] button.
Pressing this button each time switches between
name and telephone number.
Operation method of each mode is described
below.
3
Exit Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
Make a call
Press the [Volume] knob.
⁄
•
During search, a non-accent character such as “u” is
searched for instead of an accent character such as “ü”.
Speed Dialing (Preset Dial)
1
2
3
Enter Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
Calling a Number in the Call log
1
Enter Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
Select the preset dial mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Preset Call”.
2
Select the call log mode
Turn the [Volume] knob and press it when the
Select the number you want to recall from the
memory
Turn the [Volume] knob and press it when the
desired item is displayed.
Select the preset number.
desired item is displayed.
Select “Outgoing Calls” (outgoing call),
“Incoming Calls” (incoming call), or “Missed
Calls” (missed call).
Phone number is displayed.
3
4
Select a name or phone number
Turn the [Volume] knob.
✍ Switching between Display Modes
Press the [DISP] button.
Pressing this button each time switches between
name and telephone number.
4
Make a call
Press the [Volume] knob.
⁄
•
You need to register the preset dial number. Refer to
Make a call
Press the [Volume] knob.
|
34 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Make a Voice Dialing Call
⁄
•
The outgoing call list and the incoming call list, and the
1
Enter voice recognition mode
KIV-BT901:
missed call list are the lists of calls originated from and
received at this unit. They are not the ones stored in the
cell-phone memory.
1. Press the [ ] button.
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “Voice Recognize”.
Dial a Number
KIV-701: Press the [VOL] button for at least 1
second.
1
2
3
Enter Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
2
3
“Phonebook Name?” is displayed.
When a beep is heard, say the name within 2
seconds.
Select the number dial mode
Turn the [Volume] knob and press it when the
desired item is displayed.
“Phonebook Type?” is displayed.
When a beep is heard, say the category name
within 2 seconds.
Select “Number Dial”.
4
Make a call
Press the [Volume] knob.
✍ This step is the same as step 4 of the procedure
34). You can make a call or select a category.
Enter a phone number
Operation type
Operation
Select the numbers.
Move to the next digit.
Delete the last digit.
Turn the [Volume] knob.
Press the [
Press the [
¢
] button.
] button.
4
⁄
• Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.
✍ To erase the entered phone number digit
by digit:
•
•
•
If your voice cannot be recognized, a message is
displayed. Pressing the [Volume] knob allows you to retry
Both the name and category require registration of
a voice tag. Refer to <Setting a Voice Command for
Press the [4] button on the remote
controller.
Audio sound is not output during voice recognition.
4
Make a call
• Press the [Volume] knob.
• Press the [DIRECT] button on the remote
controller.
⁄
•
You can input max 25 (KIV-BT901)/ 32 (KIV-701) digits.
English
|
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Function of KIV-BT901
KIV-701 with KCA-BT300/BT200 (Optional Accessory)
Operation of Hands-Free Phoning
Registering to the Preset Dial Number
List
1
Select the phone number you wish to register
Select the phone number with reference to the
following:
2
3
Enter Preset Memory mode
Press the [Volume] knob for at least 2 seconds.
Select the preset number to put in the
memory
Turn the [Volume] knob.
Select the preset number.
4
Determine the preset number to put in the
memory
Press the [Volume] knob for at least 2 seconds.
Exit the Preset Memory mode
Press the [MENU] button.
Display of Phone Number Type
(category)
The category items in the Phone Book are displayed
as follows:
Display
Information
“General”/“
”
General
“Home”/“
“Office”/“
“Mobile”/“
“Other”/“
”
Home
Office
Mobile
Other
”
”
”
|
36 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
English
|
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Settings
SRC MENU Volume
DISP
Display
Overview
“Settings”
“Display &
Illumination”
“Display Select” Selecting and customizing the Display type.
Making Display and Illumination settings.
“Display Off
Mode”
If this unit is not operated at least 5 seconds
with“OFF”selected, the display turns off. During
a setup mode, the display will not turn off even
if 5 seconds lapse.
SCRL
“ON”/ “OFF”
Basic Operation
“Display
Dimmer”
Reduces the display Illumination brightness.
“Auto”: Dims the illumination in conjunction
with the Light switch of the vehicle.
“OFF”: Does not dim the illumination.
“Auto”: Scroll the display information
automatically.
“Once”: Scroll the display information only
once.
“OFF”: Allows you to scroll the screen manually.
Selecting the Illumination Color of the panel.
Refer to <Illumination Color Selection>
Reduces the key Illumination brightness.
“Auto”: Dims the illumination in conjunction
with the Light switch of the vehicle.
“Manual1”: Dims the illumination constantly.
“Manual2”: Dims the illumination darker than
Manual 1.
Switching display
Press the [DISP] button.
“Text Scroll”
Mode
Display Type
Artwork small
Displays song information. (Only for iPod/ USB/
Zune/ Pandora/ Internal Memory source)
Displays artwork and song information, etc.,
separately. (Only for iPod/ USB/ Zune/ Pandora/
Internal Memory source)
Displays video of a video file. (Video file only)
Displays station information, etc. (Except for iPod/
USB/ Zune/ Pandora/ Internal Memory source)
Displays the clock.
Artwork large
“Key Color
Select”
Video*1
Information
“Key ILLUMI
Dimmer”
Clock
*1 The Video mode is displayed only when you have
applied the parking brake.
“OFF”: Does not dim the illumination.
Text scroll
Press the [SCRL] button.
The displayed text scrolls.
“ILLUMI Effect” Sets whether the key illumination brightness is
changed in conjunction with the key operation.
“ON”/ “OFF”
“ILLUMI Music Sets whether the key illumination brightness is
SYNC”
changed in conjunction with the sound volume.
“ON”/ “OFF”
Display Setting
“Aspect Set”*1 Sets the aspect ratio of video files.
You can select following Display Setting items.
“Full”: Displays in Wide screen by 16:9 aspect
ratio.
“Normal”: Displays in Standard screen by 4:3
aspect ratio.
1
Select the source
Press the [SRC] button repeatedly also switches
source.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
“Monitor Setup”
“Brightness” Adjusting the display Brightness.
“-3” – “0” – “+3”
“Contrast” Adjusting the display contrast.
“-3” – “0” – “+3”
2
3
Enter Menu List mode
Press the [MENU] button.
(
: Factory setting)
*1 Only for iPod/ USB/ Internal Memory source.
Enter Display Setting mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Settings” > “Display & Illumination”.
5
6
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
4
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
|
38 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Illumination Color Selection
Customization of Clock Display
Selecting the Illumination Color of the panel.
You can customize the display of the Clock Display
mode.
1
Enter Menu List mode
Press the [MENU] button.
1
Select the source
Press the [SRC] button repeatedly also switches
2
Enter Illumination color selection mode
Turn the [Volume] knob and press it when the
desired item is displayed.
source.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
Select “Settings” > “Display & Illumination” >
“Key Color Select”.
2
3
Enter Menu List mode
Press the [MENU] button.
3
Select the Illumination Color
Turn the [Volume] knob and then press the
[Volume] knob when the desired item is
displayed.
Enter Display Setting mode and Select the
Clock Display
Select the color from “Variable Scan”/ “Color1” —
Turn the [Volume] knob and press it when the
“Color 24”/ “User”.
desired item is displayed.
Select “Settings” > “Display & Illumination”
> “Display Select” > “Type Select” > Clock
Display.
Creating “User” color
You can create your original color during the
selection from “Color1” — “Color24”.
The color you created can be called when you
select “User”.
1. Press the [Volume] knob for at least 1 second.
Enter the detail color adjustment mode.
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select the color to adjust. (red, green, or
blue).
3. Turn the [Volume] knob to adjust color
(Range: 0 – 9), and then press the [Volume]
knob.
4
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Display
Setting
“Display Select”
“Type Select” Selects the Clock Display mode.
“Text Select” Sets the text display.
“Graphic
Select”
Switches between single and dual clock and
between analog and digital display.
5
6
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
4. Press the [Volume] knob for at least 1 second.
Exit the detail color adjustment mode.
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
4
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
•
This setting can be made when “OFF” is selected for the
English
|
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Settings
Text Display Selection
In FM Tuner source
Customization of Display
You can customize the display of the Artwork small,
Artwork large, or Information mode.
Frequency & Program Service
name (“Frequency/PS”)
Song title*1 (“Song Title”)
Artist name*1 (“Artist Name”)
Station name*1 (“Station Name”) Spectrum analyzer (“Speana”)
Blank (“Blank”)
Radio text plus*1 (“Radio Text
Plus”)
Radio text (“Radio Text”)
Date (“Date”)
1
Select the source
Press the [SRC] button repeatedly also switches
source.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
*1 Information of Radio text plus is displayed.
In AM Tuner source
2
3
Enter Menu List mode
Press the [MENU] button.
Frequency (“Frequency”)
Date (“Date”)
Spectrum analyzer (“Speana”)
Blank (“Blank”)
Enter Display Setting mode and Select the
Information Display
Turn the [Volume] knob and press it when the
In USB/ iPod/ Internal Memory source
Song title (“Song Title”)
My rate (“My Rate”) : iPod only
Date (“Date”)
Spectrum analyzer (“Speana”)
Blank (“Blank”)
Artist name (“Artist Name”)
Album name (“Album Name”)
Folder name (“Folder Name”)
File name (“File Name”)
desired item is displayed.
Select “Settings” > “Display & Illumination”
> “Display Select” > “Type Select” > Artwork
small, Artwork large, or Information.
In Auxiliary input source
4
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Source name (“Source Name”)
Date (“Date”)
Spectrum analyzer (“Speana”)
Blank (“Blank”)
Display
“Display Select”
“Type Select” Selects from Artwork small, Artwork large, or
Information mode.
“Side Select”*1 Sets the icon display.
Appear/ Disappear
Setting
In Standby
Source name (“Source Name”)
Date (“Date”)
Blank (“Blank”)
In Pandora source
Song title (“Song Title”)
Artist name (“Artist Name”)
Album name (“Album Name”)
Date (“Date”)
Spectrum analyzer (“Speana”)
Thumbs Up Down (“Thumbs
Up&Down”)
“Text Select” Sets the text display.
“Graphic
Changes the wallpaper.
Select”*1
Original/ User Wallpaper*2
Blank (“Blank”)
*1 Only for Artwork small or Information mode.
In Bluetooth audio source (Optional : KIV-701 only)
Bluetooth audio (“Source Name”) Date (“Date”)
5
6
Make a setting
Song title*1 (“Song Title”)
Spectrum analyzer (“Speana”)
Blank (“Blank”)
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
When selecting “Text Select”:
1. Turn the [Volume] knob to select the text
display part, and then press the [Volume]
knob.
Artist name*1 (“Artist Name”)
Album name*1 (“Album Name”)
*1 Only with KCA-BT300 (optional accessory) connected
In Disc changer source (Optional)
Source name (“Source Name”)
Disc title (“Disc Title”)
Track title (“Track Title”)
Date (“Date”)
Spectrum analyzer (“Speana”)
Blank (“Blank”)
2. Turn the [Volume] knob to select the text,
and then press the [Volume] knob.
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
In HD Radio source (Optional)
Frequency (“Frequency”)
Artist name*1 (“Artist Name”)
Station name (“Station Name”)
Song title (“Song Title”/“Title”)
Album name*1 (“Album Name”)
Date (“Date”)
Spectrum analyzer (“Speana”)
Blank (“Blank”)
*1 Only with KTC-HR300 (optional accessory) connected
|
40 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
In SIRIUS source (Optional)
Auxiliary Input Display Setting
Channel Name (“Channel Name”) Band & Channel Number
Selecting the display when changing to Auxiliary
input source.
(“Channel Number”)
Date (“Date”)
Spectrum analyzer (“Speana”)
Blank (“Blank”)
Song Title (“Song Title”)
Artist name (“Artist Name”)
Composer name (“Composer
Name”)
1
Select the AUX source
Press the [SRC] button repeatedly also switches
Category Name (“Category
Name”)
source.
Select the “ AUX” display.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
In XM source (Optional)
Channel Name (“CHANNEL
NAME”)
Song title (“SONG TITLE”)
Artist name (“ARTIST NAME”)
Category Name (“CATEGORY”)
Band & Channel Number
(“CHANNEL NUMBER”)
Date (“Date”)
Spectrum analyzer (“Speana”)
Blank (“Blank”)
2
3
Enter Menu List mode
Press the [MENU] button.
Enter Auxiliary input display setting mode
Turn the [Volume] knob and press it when the
desired item is displayed.
⁄
•
•
•
If the selected display item does not have any information,
alternative information is displayed.
Select “Settings” > “Name Set”.
Some items cannot be selected depending on the display
type and row.
When selecting “Folder Name” while playing with iPod,
names will be displayed depending on currently selected
browsing items.
4
5
Select the Auxiliary input display
Turn the [Volume] knob.
Select “AUX”, “DVD”, “PORTABLE”, “GAME”, “VIDEO”, or
“TV”.
•
•
If the iPod Control by Hand Mode is set to on while playing
the iPod, “iPod By Hand Mode” is displayed.
If all characters cannot be displayed while playing with iPod,
the file number in the list is displayed.
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
Information
Music title
Folder name
File name
Display
•
The Auxiliary input display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S220A is used. On the KCA-S220A, “AUX EXT” is
displayed by default.
“TITLE***”
“FLD***”
“FILE***”
•
AUX source is initially set to “OFF”. Before display setting,
set “Built in AUX” described in <Initial Settings> (page 43)
to “ON”.
English
|
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock and Other Functions
5
6
7
Select Summer Time
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Summer Time” > “ON” or “OFF”.
SRC MENU Volume
Enter Date adjustment mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Date Adjust”.
Adjusting Date
1. Turn the [Volume] knob and press it when
Clock and Date Adjustment
the desired item is displayed.
Select month, day or year.
2. Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
3. Press the [MENU] button.
You can adjust the clock and date.
Display
Overview
“Settings”
“Clock & Date”
“Clock Adjust”
Sets the clock and Time zone.
8
9
Enter Date format mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Date Mode”.
“Time Synchronized” Synchronizing the Radio Data System
station time data and this unit’s clock.
“ON”/ “OFF”
“Summer Time”
Advances the clock one hour when set
to ON.
Select Date format
“ON”/ “OFF”
Turn the [Volume] knob and press it when the
desired item is displayed.
Select from 7 types.
“Sub Clock Adjust” Adjusts the time difference caused by
summer time.
“-1h”/ “0h”/ “+1h”
“Date Adjust”
“Date Mode”
Sets the date.
Sets the date display mode.
7 types
10 Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
(
: Factory setting)
1
2
Enter Menu List mode
Press the [MENU] button.
Remarks
• Time zone
Set a time zone for your area as “Home”. When you set a
time zone for different area to the “Sub”, clocks for two
time zones can be displayed on the clock display. See
Select Radio Data System’s automatic time
adjustment
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Settings” > “Clock & Date” > “Time
Synchronized” > “ON” or “OFF”.
3
4
Enter Clock adjustment mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Clock Adjust”.
Adjusting Clock and Time zone
1. Turn the [Volume] knob and press it when
the desired item is displayed.
Select hours, minutes or time zone (home or
sub).
2. Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
3. Press the [MENU] button.
|
42 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
“Built in AMP”
“AV Out Set”
Selecting“OFF”turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
“ON”/ “OFF”
Changes the iPod setting from AV Output to
output-only terminal.
“ON”/ “OFF”
Sets a method to switch to the rear view camera
video display.
Initial Settings
You can select following Initial Setting items.
1
Select the Standby
Press the [SRC] button repeatedly also switches
source.
Select the “ STANDBY” display.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
“R-CAM
Interruption”
“ON”: Switches to the rear view camera video
display when engaging the shift knob of car
to“Reverse”.
2
3
Enter Menu List mode
Press the [MENU] button.
“OFF”: Rear view camera is not used.
“R-CAM Mirror” You can flip the left and right of the rear view
camera video display. Set to“ON”and the rear
view will be displayed left and right in mirror
image on the screen.
Enter Initial Setting mode
Turn the [Volume] knob and press it when the
desired item is displayed.
“ON”/ “OFF”
Select “Initial Settings”.
“System F/W
Update”
Updates the firmware. The update information
will be posted on the following URL as
necessary.
4
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
(
: Factory setting)
1
*
Not selectable when KTC-HR200 (optional accessory) is
connected.
Display
Overview
“Initial Settings”
“Tuner Preset
Type”*1
You can select a preset type.
5
6
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
“Type Normal”: Memorizes one station for each
preset button in each band (FM/ AM/ SR1 –
SR4/ XM1 – XM4).
“Type Mixed”: Memorizes one station for each
preset button regardless of the selected band
(FM/ AM) and another Satellite Radio Tuner.
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
“Source Select” Sets the source selection method.
“1”/ “2”
Remarks
• “AV Out Set”
Outputs video and audio from the iPod source. Those from
the USB device cannot be output.
“Beep”
Setting the operation check sound (beep sound)
ON/OFF.
“ON”/ “OFF”
“Menu Language You can select the display language for the
When the iPod source is switched to the Pandora source
or Internal Memory source, the output from the AV Output
terminal stops.
Select”
Menu list item.
“English”/ “Français”/ “Español”
“Pandora Source” When this is set to ON, Pandora source can be
selected.
“ON”: Allows you to select the Pandora source
by connecting a Pandora-compliant iPhone.
“OFF”: Disable Pandora source selection.
“Built in AUX”
When this is set to ON, AUX source can be
selected.
“ON”: Allows AUX source to be selected. Use
this setting when the built-in AUX terminal
is connected to the external equipment all
the time.
“OFF”: Disable AUX source selection. Use this
setting when the built-in AUX terminal is
not used.
English
|
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock and Other Functions
Demonstration Mode Setting
Turning the demonstration mode ON/OFF.
1
2
Enter Menu List mode
Press the [MENU] button.
Enter Demonstration mode setting
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “DEMO Mode”.
3
4
Set the Demonstration mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “ON” or “OFF”.
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Function of KIV-701
Muting Volume upon Reception of
Phone Call
The audio system automatically mutes when a call
comes in.
When a call comes in
“CALL” is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The “CALL” display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The “CALL” display disappears and the audio system
comes back ON.
⁄
•
To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
80).
|
44 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
English
|
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Adjustments
“2Zone Select”
“2Zone Front/Rear”
“Preset”
Sets the Dual Zone System.
SRC MENU Volume
Sets the audio preset.
(
: Factory setting)
1
Select the source
Press the [SRC] button repeatedly also switches
source.
Select a source other than “ STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
Audio Control
You can adjust following Audio Setting items.
Display
Overview
“SubWoofer Level”
You can set subwoofer level.
“–15” — “0” — “+15”
2
3
Enter Audio Control mode
Press the [Volume] knob.
“DSP Set”
“Bypass”: Disables the DSP function.
“Through”: Enables the DSP function.
Sets the sound quality.
Sets the Bass Boost level in two steps.
“OFF”/ “STEP1”/ “2”
Compensates the low volume or bass sound
being lost by road noises to make vocal sound
clearer.
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
“Equalizer”
4
5
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
“Bass Boost”
“HIGHWAY-SOUND”
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
“OFF”/ “STEP1”/ “2”/ “3”
“Supreme+”
“Position”
Turns ON/OFF the Supreme plus function.
Can be set while USB, iPod, Pandora and
Internal Memory source.
Remarks
• “DSP Set”
When “DSP Set” is set to “Bypass”, the DSP function is
disabled , and the colored items cannot be set.
“ON”/ “OFF”
Compensates the sound environment in
accordance with the listening position.
48).
Adjusts left/right speaker balance.
(Left) “L15” — “0” — “R15” (Right)
Adjusts front/rear speaker balance.
(Front) “F15” — “0” — “R15” (Rear)
• “HIGHWAY-SOUND”
Increases the volume of faintest sound being lost by road
noises to make the sound more audible. Additionally, it
accentuates bass sound being lost by road noises to make
the bass sound more dynamic.
“Balance”
“Fader”
•
HIGHWAY-SOUND is not available in tuner source and
HD Radio source.
• “Supreme+” (Supreme Plus)
Technology to extrapolate and supplement with
proprietary algorithm, the high-frequency range that is cut
off when encoding. The bass and vocal sound that are cut
off by encoding are supplemented for the reproduction
of natural sound quality. Supplementing is optimized by
compression format and processed according to bit rate.
The effect is negligible with music that is encoded at high
bit rate, variable bit rate or has minimal high frequency
range.
“SubWoofer”
Turns on/off the subwoofer output.
“ON”/ “OFF”
“Detailed Setup”
“Car Type”
“Speaker Setting”
“Car Type Adjust”
“X'Over”
To get clear sound, set the sound environment
according to the location and size of physically
installed speakers with reference to the
followings:
• “2Zone Select” (Dual Zone System)
Main source and sub source output Front channel and
Rear channel separately.
“Volume Offset”
Sets each source’s volume as a difference from
the basic volume.
“–8” — “0” (AUX: “–8”— “+8”)
|
46 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset Equalizer Curve Select
Manual Equalizer Control
You can select following Equalizer curve.
You can adjust following Equalizer Control items.
Display
“Natural”
“User”
“Rock”
“Pops”
“Easy”
“Top40”
“Jazz”
“Game”
“iPod”
Equalizer curve
Natural
User*
Rock
Pops
Easy
Top 40
Jazz
Band
Item
Range
“BAND1”(62.5 Hz) “GAIN”Band level
“EFCT”Bass Effect
“BAND2”(250 Hz) “GAIN”Band level
“BAND3”(1 kHz)
“BAND4”(4 kHz)
“BAND5”(16 kHz) “GAIN”Band level
-9 –+9 dB
“OFF”/“ON”
-9 –+9 dB
-9 –+9 dB
-9 –+9 dB
-9 –+9 dB
“GAIN”Band level
“GAIN”Band level
1
Select the source
Press the [SRC] button repeatedly also switches
source.
Select a source other than “ STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
Game
iPod (During iPod source only)
* The Equalizer curve set in the section <Manual Equalizer
Control> is recalled.
1
Select the source
Press the [SRC] button repeatedly also switches
source.
Select a source other than “ STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
2
3
Enter Audio Control mode
Press the [Volume] knob.
Enter Manual Equalizer Control mode
Turn the [Volume] knob and press it when the
desired item is displayed.
2
3
Enter Audio Control mode
Press the [Volume] knob.
Select “Equalizer” > “Manual Equalizer”.
4
5
6
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Enter Preset Equalizer mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Equalizer” > “Preset Equalizer”.
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
4
Select the Equalizer curve
Turn the [Volume] knob and press it when the
desired item is displayed.
✍ Select the iPod Equalizer curve
You can select from 22 Equalizer curve types for
iPod when “iPod” is selected.
1. Enter iPod Equalizer mode
Press the [Volume] knob.
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
⁄
•
When “iPod” is selected in the section <Preset Equalizer
Curve Select> (page 47), Manual Equalizer Control is
disabled.
2. Select the iPod Equalizer curve
Turn the [Volume] knob and press it when the
desired item is displayed.
•
You can select for each source.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
⁄
•
You can select for each source.
English
|
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Adjustments
Listening Position Selection
Listening Position Fine Adjustments
The sound environment can be compensated in
accordance with the selected position. According to
the listening position, select the position from the
following settings.
Making fine adjustment of the value specified at
Preset position selection per speaker.
1
Select the source
Press the [SRC] button repeatedly also switches
source.
Compensation seat
Not compensating.
Front-Left seat
Front-Right seat
Front seat
Display
“ALL”
“FL”
“FR”
“F ALL”
Select a source other than “ STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
2
3
Enter Audio Control mode
Press the [Volume] knob.
1
Select the source
Press the [SRC] button repeatedly also switches
source.
Select a source other than “ STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
Enter Manual position setting mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Position” > “DTA”.
4
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
2
3
Enter Audio Control mode
Press the [Volume] knob.
Enter Preset position setting mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Item
Setting overview
Front Left speaker
Front Right speaker
Rear Left speaker
Rear Right speaker
Subwoofer Left
“Front”/“L”
“Front”/“R”
“Rear”/“L”
“Rear”/“R”
“SW”/“L”
“SW”/“R”
“INITIAL”
Select “Position” > “Preset Position”.
4
5
Select the seat you want to compensate
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
Subwoofer Right
Initialize the setting values.
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
5
6
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
Adjust between 0 and 5.58 feet.
Press the [Volume] knob for at least 1 second if you
want to execute the “INITIAL”.
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
|
48 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
The Bluetooth audio source can be set exclusively to the
front speaker. Set “2Zone Front/Rear” to “Rear”.
The source set as a sub source cannot be operated
during the dual zone mode. Cancel the mode and then
operate the source.
Dual Zone System
The separate sources can be selected for Front
channel and Rear channel.
Display
Overview
“2Zone Rear Volume”*1 Adjust the volume of Rear channel.
“0” — “35”
“Detailed Setup”
“2Zone Select”
The Dual Zone System is enabled by selecting
a sub source.
“OFF”/ “USB” (“iPod”/ “Zune”)/ “INT
MEM”/ “AUX”
“2Zone Front/Rear”*1 Specifies the destination of sub source sound
when the Dual Zone function is turned on.
“Rear”/ “Front”
(
: Factory setting)
*1 The Dual Zone System is enabled.
1
Select the source
Press the [SRC] button repeatedly also switches
source.
Select a source other than “ STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
2
3
Enter Audio Control mode
Press the [Volume] knob.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Detailed Setup”.
4
5
6
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
⁄
•
•
•
•
Select Main source by [SRC] button.
Adjust the volume of Front channel by [Volume] knob.
The Audio Control has no effect on sub source.
“USB”, ”iPod”, “Zune” and “Int.Mem.” (Internal memory)
cannot be set at the same time for the main and sub
sources.
•
There are following limitations when Dual Zone System
is enabled.
- There is no output from the subwoofer.
and DSP function are not available.
English
|
49
Download from Www.Somanuals.com. All Manuals Search And Download.
DSP Setup
Speaker Setting
SRC MENU Volume
The speaker X’Over is automatically set when the
position and size of each speaker are selected from
the following items.
Speaker
“FRONT”
Item
“Location” Speaker Location Front
“Door”, “On Dash”, “Under Dash”
Speaker Size Front
Range
“Size”
“O.E.M.”, “4inch”, “5inch”, “6 1/2inch”,
“6 3/4inch”, “7inch”, “4x6”, “5x7”, “6x8”,
“6x9”, “7x10”
Car Type Selection
You can compensate the delay of the sound arrival
time by selecting your environment from the
following car types.
“Tweeter” Speaker Size Tweeter
“None”, “Use”
“Location” Speaker Location Rear
• “Door”, “Rear Deck”
“REAR”
Display
Overview
• “2nd Row”, “3rd Row” (Car Type:
“Minivan”, “Minivan (Long)”)
Speaker Size Rear
“None”, “O.E.M.”, “4inch”, “5inch”,
“6 1/2inch”, “6 3/4inch”, “7inch”, “4x6”,
“5x7”, “6x8”, “6x9”, “7x10”
Speaker Size Subwoofer
“Off”
Not compensating.
Compact car
Full size car
Station wagon
Minivan
Sport-utility vehicle
Long Minivan
“Compact”
“FullSize Car”
“Wagon”
“Minivan”
“SUV”
“Size”
“Size”
“SUB W”
“None”, “6 1/2inch”, “8inch”, “10inch”,
“12inch”, “15inch Over”
“Minivan (Long)”
1
Select the source
Press the [SRC] button repeatedly also switches
1
Select the source
Press the [SRC] button repeatedly also switches
source.
source.
Select a source other than “ STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
Select a source other than “ STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
2
3
Enter Audio Control mode
Press the [Volume] knob.
2
3
Enter Audio Control mode
Press the [Volume] knob.
Enter Car Type select mode
Turn the [Volume] knob and press it when the
Enter Speaker setting mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Detailed Setup” > “Speaker Setting”.
desired item is displayed.
Select “Detailed Setup” > “Car Type”.
4
5
Select the car type
Turn the [Volume] knob and press it when the
desired item is displayed.
4
5
6
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
⁄
•
You can compensate the distances in more details by
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
|
50 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference point
Car Type Fine Adjustments
Adjusting fine tuning of the speaker position
compensation value specified at <Car Type
+3.2 feet
FRONT
FRONT
REAR
Display
“Front”
“Rear”
“SW”
Item
Range
1.7 feet
Front speaker
Rear speaker
Subwoofer
0 – 14.44 feet
0 – 14.44 feet
0 – 14.44 feet
2.6 feet
REAR
1
Select the source
Press the [SRC] button repeatedly also switches
4.9 feet
+2.3 feet
source.
Select a source other than “ STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
+0 feet
SUB-W
6
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
2
3
Enter Audio Control mode
Press the [Volume] knob.
Enter Car Type Adjustment mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Detailed Setup” > “Car Type Adjust”.
4
5
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the ears
of the person sitting in the front seat, and set
the right and left positions to the center of the
vehicle interior.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the distance difference in accordance
with the farthest speaker.
English
|
51
Download from Www.Somanuals.com. All Manuals Search And Download.
DSP Setup
8
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
X’Over Setting
Fine adjusting the following setting values
corresponding to the X’Over values set in the
Audio Preset Memory
Registering the value setup by Sound Control.
Display
Item
Range
“X’Over”
“Front”
1
Setup Sound Control
Refer to the following operations to setup the
Sound Control.
“FC”
Front High Pass Filter
Through, 30, 40, 50, 60, 70, 80, 90,
100, 120, 150, 180, 220, 250 (Hz)
“SLOPE” Front High Pass Slope
-6, -12, -18, -24 dB/Oct
“Rear”
“FC”
Rear High Pass Filter
Through, 30, 40, 50, 60, 70, 80, 90,
100, 120, 150, 180, 220, 250 (Hz)
“SLOPE” Rear High Pass Slope
-6, -12, -18, -24 dB/Oct
Subwoofer Low Pass Filter
“SubWoofer” “FC”
30, 40, 50, 60, 70, 80, 90, 100, 120,
2
Enter Audio preset memory mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Detailed Setup” > “Preset” > “Preset
Memory”.
150, 180, 220, 250, Through (Hz)
“SLOPE” Subwoofer Slope
-6, -12, -18, -24 dB/Oct
“PHASE” Subwoofer Phase
Reverse (180°)/ Normal (0°)
3
4
Select the number to put in the memory
Turn the [Volume] knob and press it when the
desired item is displayed.
1
Select the source
Press the [SRC] button repeatedly also switches
source.
Select a source other than “ STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
Select a preset number.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “YES”.
“Completed” is displayed.
2
3
Enter Audio Control mode
Press the [Volume] knob.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
Enter X’Over setting mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Detailed Setup” > “X’Over”.
⁄
•
•
Register 6 patterns of Audio Preset Memory.
Preset number “1”:
When you press the Reset, all the sources will be the
setting value which is registered.
4
Select the speaker you want to set
Turn the [Volume] knob and press it when the
desired item is displayed.
•
•
Preset number “1” and “2”:
The memory cannot be erased by the Reset button.
This function cannot be registered when the iPod
Select “Front”, “Rear”, or “SubWoofer”.
5
6
7
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
Repeat steps 3 to 5 to complete the X’Over
settings
|
52 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Preset Recall
Recalling the sound setup registered by <Audio
1
Select the source
Press the [SRC] button repeatedly also switches
source.
Select a source other than “ STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
2
Enter Audio preset recall mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Detailed Setup” > “Preset” > “Preset
Recall”.
3
4
Select the number to recall in the memory
Turn the [Volume] knob and press it when the
desired item is displayed.
Select the preset number.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “YES”.
“Completed” is displayed.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
⁄
•
changed to the value which was recalled.
•
The Equalizer curve is changed to the value which was
recalled by the selected source.
English
|
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Function of KIV-BT901
KIV-701 with KCA-BT300/BT200 (Optional Accessory)
Bluetooth Setup
When a cell-phone has already been registered,
or maximum of five cell-phones have already
been registered (Selecting a cell-phone)
KIV-BT901
KIV-701
iPod
Volume
SRC MENU
2
“(cell-phone name)” or “Device Full” is
displayed.
3
Select a cell-phone name
Turn the [Volume] knob.
✍ To register a new cell-phone, select “Device
Search”, then go to “When registering a cell-
phone for the first time.”
Function of KIV-BT901
Easy pairing function
4
Set up the cell-phone name
Press the [Volume] knob.
1
Enter easy pairing mode
“
(cell-phone name)” or “ (cell-phone name)” is
Press the [ ] button for at least 1 second.
Any of the following is displayed depending on
cell-phone registration condition:
displayed.
“
“
” (blue): The selected Bluetooth device is busy.
” (gray): The selected Bluetooth device is on
standby.
– “Searching”: When registering a cell-phone for the
first time.
“ ” (blank): The Bluetooth device is deselected.
✍ If a Bluetooth device is already selected, deselect
it, and then select a different one.
– “(cell-phone name)”: When a cell-phone has
already been registered.
– “Device Full”: When maximum of five cell-phones
have already been registered.
5
Exit easy pairing mode
Press the [ ] button.
When registering a cell-phone for the first time
(Registering a cell-phone)
Deleting the registered cell-phone
2
3
4
“Searching” is displayed.
Search for the Bluetooth device.
When search is completed, “Finished” is displayed.
2
“(cell-phone name)” or “Device Full” is
displayed.
3
Select a cell-phone name
Turn the [Volume] knob.
Select a cell-phone name
Turn the [Volume] knob and press it when the
desired item is displayed.
4
5
Delete the selected cell-phone
Press the [Volume] knob for at least 2 seconds.
Input the PIN code
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “YES”.
1. Turn the [Volume] knob and press it when
the desired item is displayed.
Select the digit.
2. Turn the [Volume] knob to select the
numbers, and then press the [Volume] knob.
“Delete” is displayed.
Bluetooth Setting
5
6
Transmit the PIN code
Press the [Volume] knob for at least 1 second.
If “Pairing Success” is displayed, registration is
completed.
When “Confirm Phone” is displayed, confirm
connection with a cell-phone operation.
You can select following Bluetooth Setting items.
1
Enter Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
The receiver is connected to a cell-phone, with
“HF Connect” displayed, and exits the easy
pairing mode.
2
3
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “BT Settings”.
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
|
54 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
“SMS Inbox”
Overview
Display the received short message.
“Mic Gain”*3
“Noise
Adjust the sensitivity of the microphone for a
telephone call. Adjust the voice of caller. Setting
to“+”increases the voice volume.
“–3” – “0” – “+3”
“BT Settings”
“Pairing”
Reduce the noises generated by surrounding
Reduction”*3 environment without changing the microphone
volume. Adjust the voice of caller when it is
not clear. Setting to“+”increases the noise
reduction.
“Device
Registration”
Register a Bluetooth device (pairing).
Refer to <Registering Bluetooth Device
Select a cell-phone or Bluetooth audio player
connection.
“Phone
“–3” – “0” – “+3”
Selection”
“Audio
“Echo Cancel
Level”*3
Adjust the level of echo cancellation. Setting to
“+”increases the echo cancel reduction.
“–2” – “0” – “+2”
Refer to <Selecting the Bluetooth Device You
Selection”*1
“Special Device Register a Bluetooth device (pairing).
Select”
(
: Factory setting)
Refer to <Registering Bluetooth Device
*1 Function of KIV-701 with KCA-BT300/BT200 (Optional
Accessory)
“Device Delete” Cancel registration of the Bluetooth device.
Refer to <Deleting a Registered Bluetooth
“SMS Download” Download a short message.
*2 Function of KIV-BT901
*3 Function of KIV-BT901/ KIV-701 with KCA-BT300
(Optional Accessory)
4
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
“Voice Tag”
Registers voice for voice recognition and voice
to select the Phone number category in Phone
book.
5
6
Exit BT Setting mode
Press the [MENU] button for at least 1 second.
Exit Bluetooth mode
“Detailed Setup” Move to detailed item.
“PIN Code Edit” Specify the PIN code required when registering
this unit using the Bluetooth device.
“Auto Answer” Answer a call automatically after lapse of the
preset time interval for automatic answer.
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
Remarks
• “Auto Answer” (Setting the Time Interval for Automatic
Answer)
“OFF”/ “0s” – “8s” – “99s”
“Auto
Automatically reconnects the selected
Reconnect”*2 Bluetooth device when radio wave becomes
strong enough, even after it is disconnected.
“ON”/ “OFF”
This function automatically answers (responds to) a call
after lapse of the preset time interval for automatic answer.
“OFF” : Does not answer the phone call automatically.
“0” : Automatically answers the phone call at once.
“1s” – “99s” : Automatically answers the phone call after
lapse of 1 – 99 seconds.
✍ When this function is enabled, the
Bluetooth device is reconnected even if
“Phone Selection”is selected to select
a cell-phone connection. To cancel the
Bluetooth connection, select OFF to disable
this function.
⁄
•
If the time set in the cell-phone is shorter than that set in
the unit, the former will be used.
“Bluetooth
HF”*2
You can specify output speakers for hands-free
voice communication and Bluetooth audio
•
This function does not work for call waiting.
“Bluetooth HF/ sound.
• “BT F/W Update” (Displaying the Firmware Version)
Display the version of the firmware of this unit.
For how to update the firmware, access our web site.
Audio”*1
“Front”: Outputs voice from the front speakers.
“All”: Outputs voice from the front and rear
speakers.
“Call Beep”
You can output a beep from the speaker when
a call comes in.
“ON”: Beep is heard.
“OFF”: Beep is canceled.
“BT F/W Update” Display the version of the firmware of this unit.
English
|
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Function of KIV-BT901
KIV-701 with KCA-BT300/BT200 (Optional Accessory)
Bluetooth Setup
the [Volume] knob and proceed to steps 5.
Registering Bluetooth Device
(Pairing)
5
6
Input the PIN code
1. Turn the [Volume] knob and press it when
the desired item is displayed.
Select the digit.
2. Turn the [Volume] knob to select the
numbers, and then press the [Volume] knob.
To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing). You
can register up to 5 Bluetooth devices to this unit.
Registering from Bluetooth devices
1
Turn on this unit
Press the [SRC] button.
Transmit the PIN code
Press the [Volume] knob for at least 1 second.
If “Pairing Success” is displayed, registration is
completed.
2
Start registering this unit by operating the
Bluetooth device
When “Confirm Phone” is displayed, confirm
connection with a cell-phone operation.
✍ If the error message appears even though the
PIN code is correct, try <Registering Special
By operating the Bluetooth device, register the
hands-free unit (pairing). Select “KENWOOD BT
USB/R-3P1”/ “KCA-BT300”/ “KCA-BT200” from the list
of connected units.
3
4
Enter a PIN code
Input the PIN code (“0000”) in the Bluetooth
device.
Check that registration is complete on the
Bluetooth device.
✍ PIN code is set to “0000” as the default. You can
change this code. Refer to <Registering PIN
7
8
Return to the device list
Press the [Volume] knob.
Exit BT Setting mode
Press the [MENU] button for at least 1 second.
⁄
•
This unit allows up to eight digits to be input for a PIN
code. If a PIN code cannot be input from this unit, it can
be input from the Bluetooth device.
By operating the Bluetooth device, start hands-
free connection.
•
If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
Registering Special Bluetooth device
Allow registration of a special device that cannot be
registered normally (pairing).
1. Select Special device registration mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Registering from this unit
1
Enter Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
2
Enter Bluetooth device registration mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “BT Settings” > “Detailed Setup” > “Special
Device Select”.
A list is displayed.
Select “BT Settings” > “Pairing” > “Device
Registration”.
Search for the Bluetooth device.
2. Select a device name
Turn the [Volume] knob and push the center
when the desired device name is displayed.
If “Completed” is displayed, registration is
completed.
3. Go through the procedure step 3 of
<Registering from this unit> and complete
the registration (pairing).
When search is completed, “Finished” is displayed.
3
4
Select a Bluetooth device
Turn the [Volume] knob and press it when the
desired item is displayed.
“Confirm Phone” is displayed (KCA-BT300
only)
Cancelling Special device registration mode
Press the [MENU] button for at least 1 second.
When “Confirm Phone” is displayed, confirm
connection with a cell-phone operation.
If “Pairing Success” is displayed, proceed to step 7.
If “Pairing Failed”/ “Connect NG” is displayed. Press
⁄
•
If the device name is not in the list, select “Other Phones”.
|
56 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering PIN Code
Selecting the Bluetooth Device You
Wish to Connect
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1
Enter Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
1
Enter Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
2
Enter PIN code edit mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “BT Settings” > “Detailed Setup” > “PIN
Code Edit”.
2
Select Bluetooth device selection mode
Turn the [Volume] knob and press it when the
desired item is displayed.
The current setting of PIN code is displayed.
Cell-phone
3
Input the PIN code
Select “BT Settings” > “Pairing” > “Phone
Selection”.
1. Turn the [Volume] knob and press it when
the desired item is displayed.
Select the digit.
2. Turn the [Volume] knob to select the
numbers, and then press the [Volume] knob.
Audio player (KIV-701 only)
Select “BT Settings” > “Pairing” > “Audio
Selection”.
“(device name)” is displayed.
4
5
Register a PIN code
3
4
Select the Bluetooth device
Turn the [Volume] knob.
Press the [Volume] knob for at least 1 second.
If “Completed” is displayed, registration is
completed.
Set up the Bluetooth device
Press the [Volume] knob.
Exit BT Setting mode
Press the [MENU] button for at least 1 second.
“
“
“
(device name)” or “ (device name)” is displayed.
” (blue): The selected Bluetooth device is busy.
” (gray): The selected Bluetooth device is on
standby.
⁄
•
•
By default, “0000” is specified.
A PIN code can be specified with up to eight digits.
“ ” (blank): The Bluetooth device is deselected.
5
Exit BT Setting mode
Press the [MENU] button for at least 1 second.
⁄
•
If a Bluetooth device is already selected, deselect it, and
then select a different one.
•
If you cannot select a device using the audio player,
connect the device with the audio player.
English
|
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Function of KIV-BT901
KIV-701 with KCA-BT300/BT200 (Optional Accessory)
Bluetooth Setup
Deleting a Registered Bluetooth
Device
Downloading the Phone Book
Download the phone book data from the cell-
phone to this unit so that you can use the Phone
Book of this unit.
You can delete a registered Bluetooth device.
1
Enter Bluetooth mode
To download automatically
If the cell-phone supports a phone book
synchronization function, the phone book is
downloaded automatically after Bluetooth
connection.
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
2
Enter Bluetooth device deletion mode
Turn the [Volume] knob and press it when the
desired item is displayed.
⁄
•
•
Setting on the cell-phone may be required.
If no phone book data is found in the unit even after
the compete display, your cell-phone may not support
automatic download of phone book data. In this case, try
downloading manually.
Select “BT Settings” > “Pairing” > “Device
Delete”.
“(device name)” is displayed.
3
Select the Bluetooth device
Turn the [Volume] knob.
To download from the cell-phone manually
4
5
Delete the selected Bluetooth device
Press the [Volume] knob.
1
By operating the cell-phone, end the hands-free
connection.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “YES”.
2
By operating the cell-phone, send the phone
book data to this unit
By operating the cell-phone, download the phone
“Delete” is displayed.
book data to this unit.
6
Exit BT Setting mode
Press the [MENU] button for at least 1 second.
• During downloading:
“Downloading” is displayed.
• After completion of downloading:
“Completed” is displayed.
⁄
•
When a registered cell-phone is deleted, its Phone Book,
log, SMS, and voice tag are also deleted.
3
By operating the cell-phone, start the hands-
free connection.
To clear the downloading completion message
Press any button.
⁄
•
Up to 1000 phone numbers can be registered for each
registered cell-phone.
•
Up to 25 (KIV-BT901)/ 32 (KIV-701) digits can be
registered for each phone number along with up to 50*
characters representing a name.
(* 50: Number of alphabetical characters. Fewer
characters can be input depending on the type of
characters.)
•
To cancel downloading of the phone book data, operate
the cell-phone.
|
58 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Select “Phonebook Name Check” (Play)
Adding a Voice Dialing Command
5
Press the [Volume] knob.
Play the registered voice and return to step 3.
Add a voice tag to the phone book for voice dialing.
You can register up to 35 voice tags.
Select “Phonebook Name Delete” (Delete)
1
Enter Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
5
6
Delete a voice tag
Press the [Volume] knob.
Turn the [Volume] knob to select “YES”, and
then press the [Volume] knob.
2
Enter Phone book name edit mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “BT Settings” > “Voice Tag” >
“Phonebook Name Edit”.
Exit BT Setting mode
Press the [MENU] button for at least 1 second.
⁄
•
Audio sound is not output during voice tag registration.
3
4
Search for the name to register
Select the name to register with reference to 4 in
If a voice tag has already been registered for a
name, “*” is displayed before the name.
Select a mode
Turn the [Volume] knob.
Display
Operation
“Phonebook Name Registration” Register a voice tag.
“Phonebook Name Check”*
“Phonebook Name Delete”*
Play a voice tag.
Delete a voice tag.
* Displayed only when a name for which a voice tag has
been registered is selected.
Select “Phonebook Name Registration”
(Registration)
5
6
Press the [Volume] knob.
Register a voice tag (first)
“Enter Voice 1” is displayed.
When a beep is heard, say a voice tag within 2
seconds.
7
8
Confirm the voice tag (second)
“Enter Voice 2” is displayed.
When a beep is heard, say the same voice tag as
that you said in step 6 within 2 seconds.
“Completed” is displayed.
End registration
Press the [Volume] knob.
Return to step 3. You can register another voice tag
continuously.
⁄
•
If your voice cannot be recognized, a message is
displayed. Pressing the [Volume] knob allows you to retry
English
|
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Function of KIV-BT901
KIV-701 with KCA-BT300/BT200 (Optional Accessory)
Bluetooth Setup
Setting a Voice Command for
Category
Add a voice tag to the phone number category
(type) for voice calling.
1
Enter Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
2
Enter Phone Number type edit mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “BT Settings” > “Voice Tag” >
“Phonebook Type Edit”.
3
4
Select the category (type) you wish to set
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “General”, “Home”, “Office”, “Mobile”, or
“Other”.
Select a mode
Turn the [Volume] knob.
Display
Operation
“Phonebook Type Registration” Register a voice tag.
“Phonebook Type Check”*
“Phonebook Type Delete”*
Play a voice tag.
Delete a voice tag.
* Displayed only when a name for which a voice tag has
been registered is selected. Function of KIV-701 with
KCA-BT300/BT200 (Optional Accessory)
5
6
Register the category (type) by performing
steps 5 to 8 in <Adding a Voice Dialing
Exit BT Setting mode
Press the [MENU] button for at least 1 second.
⁄
•
Set the voice tag for all the 5 categories. If the voice tag
is not registered for all the categories, the Phone book
may not be recalled by voice command.
|
60 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Function of KIV-BT901
KIV-701 with KCA-BT300/BT200 (Optional Accessory)
SMS (Short Message Service)
Display the SMS
MENU
Volume
DISP
The SMS arrived at the cell-phone is displayed on
the receiver.
A newly arrived message is displayed.
¤
•
To prevent car accidents, the driver should not read the
SMS while driving.
KIV-BT901
KIV-701
iPod
When a new message arrives
“SMS RECEIVED” is displayed.
Downloading the SMS
The display disappears with any operations.
Download the short message (SMS) arrived at the
cell-phone so that it can be read on this unit.
Displaying the SMS
1
2
Enter Bluetooth mode
1
2
3
Enter Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
Enter SMS Inbox mode
Enter SMS download mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “BT Settings” > “SMS Download”.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “SMS Inbox”.
A message list appears.
Start downloading
3
4
Select a message
Turn the [Volume] knob.
Each pressing of the [DISP] button switches
between telephone number or name and message
reception date.
Press the [Volume] knob.
“SMS Downloading” is displayed.
When the downloading finishes, “Completed” is
displayed.
4
5
Exit BT Setting mode
Press the [MENU] button for at least 1 second.
Display the text
Press the [Volume] knob.
Turning the [Volume] knob scrolls the message.
Pressing the [Volume] knob again returns to the
message list screen.
Exit Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
5
6
Exit SMS Inbox mode
Press the [MENU] button.
⁄
•
The cell-phone must be able to transmit the SMS using
Bluetooth. Setting on the cell-phone may be required.
If the cell-phone does not support SMS function, the
SMS download item in Function Control mode is not
displayed.
Exit Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
•
•
•
When the SMS is downloaded from the cell-phone, the
unopened messages in the cell-phone are opened.
The already-read and unread short messages can be
respectively downloaded up to 75.
⁄
•
•
•
The unopened message is displayed at the beginning
of the list. Other messages are displayed in the order of
reception.
Up to 200 characters can be received per SMS.
The SMS that has arrived when the cell-phone is not
linked with Bluetooth cannot be displayed. Download
the SMS.
The short message cannot be displayed during
downloading the SMS.
English
|
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Satellite Radio Tuner Control (Optional)
Satellite Radio Setting
SRC MENU
Volume
You can select following Satellite Radio Setting
items.
1
2
Select Satellite Radio source
Enter Menu List mode
Press the [MENU] button.
4
¢
3
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Settings”.
Basic Operation
4
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Selecting Satellite Radio source
Press the [SRC] button repeatedly also switches
source.
Select the “ SIRIUS”, or “ XM” display.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
Display
“Settings”
Selectable setting/item
“Seek Mode” Selects the tuning mode of the radio.
“Channel”: Normal manual seeking control.
“Preset”: Search in order of the channels in the
Preset memory
⁄
•
You need to register to the service provider to receive
the service by Satellite Radio. Consult the service
provider if “CALL … TO SUBSCRIBE” appears.
The radio may take a little time to start receiving after
you select the Satellite Radio source.
“ESN”
Displays the Electronic Serial Number of satellite
radio.
“ESN=”
•
•
(
: Factory setting)
5
6
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
If the signal reception fails, “Acquiring Signal”/ “No Signal”
appears.
Selecting the channel
Press the [4] or [¢] button.
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Selecting the Preset Band
1. Enter Menu List mode
Press the [MENU] button.
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “SR1”, “SR2”, “SR3” or “SR4”. (SIRIUS)
Select “XM1”, “XM2”, “XM3” or “XM4”. (XM)
Category and Channel Search
Selecting the channel and category you want to
receive.
1
2
Select Satellite Radio source
Switching display
Press the [DISP] button to select display mode.
Selects the Information or Clock.
Enter Menu List mode
Press the [MENU] button.
Display example of information display mode
3
Enter Category and Channel Search mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Channel Search”.
1
4
5
Select the Category
Turn the [Volume] knob to select Category, and
then press the [Volume] knob.
Select the Channel
Turn the [Volume] knob to select Channel, and
then press the [Volume] knob.
|
62 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Cancelling Category and Channel Search mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Channel Scan
Every receivable Channel is checked for 10 seconds.
1
2
Select Satellite Radio source
⁄
•
You cannot Channel search until the category
information is acquired.
Enter Menu List mode
Press the [MENU] button.
3
Start Channel Scan
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Channel Scan”.
Preset Memory
Putting the channel in the memory.
1
2
3
Select the channel you wish to store in the
preset memory
4
Release it when the channel you want to listen
to is received
Press the [Volume] knob.
Enter Menu List mode
Press the [MENU] button.
Function of remote control
Enter Preset Memory mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Direct Access Tuning
Entering the channel and tuning.
Select “List & Memory”.
1
2
Select Satellite Radio source
4
Select the number to put in the memory
Turn the [Volume] knob and press it for at least
2 seconds when the desired item is displayed.
Select the preset number.
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
⁄
3
4
Enter the channel
Press the number buttons.
•
Only the channel number is stored. Category information
is not stored.
Tune in to the entered channel
Press the [4] or [¢] button.
•
Up to six channels can be registered for each preset
band. Selecting “Mixed” for “Tuner Preset Type” allows
you to register up to six stations including FM, AM, and
another Satellite Radio Tuner regardless of the selected
source. See “Tuner Preset Type” of <Initial Settings> (page
43).
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
⁄
•
If you make no button operation for 10 seconds, the
Direct Access Tuning mode is automatically canceled.
If you cannot receive any signal in the input Channel due
to bad conditions on radio wave or other such problems,
“Acquiring Signal”/ “No Signal” appears.
Preset Tuning
•
Recalling the channels in the memory.
1
2
Select Satellite Radio source
Enter Menu List mode
Press the [MENU] button.
3
Select a desired station in the memory
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “List & Memory” > Preset number.
English
|
63
Download from Www.Somanuals.com. All Manuals Search And Download.
HD Radio™ Tuner Control (Optional)
Station Preset Memory
SRC MENU
DISP SEARCH MODE
Volume
Putting a station in the memory.
1
Select the radio band and tune in a desired
radio station you wish to store in the preset
memory
2
3
Enter Menu List mode
Press the [MENU] button.
4
¢
Enter Preset Memory mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Basic Operation
Selecting HD Radio source
Press the [SRC] button repeatedly also switches
source.
Select the “ HD RADIO” display.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
Select “List & Memory”.
4
Select the number to put in the memory
Turn the [Volume] knob and press it for at least
2 seconds when the desired item is displayed.
Select the preset number.
⁄
•
You can register up to 18 FM stations and six AM
stations. Selecting “Mixed” for “Tuner Preset Type” allows
you to register up to six stations including FM, AM, and
another Satellite Radio Tuner regardless of the selected
source. See “Tuner Preset Type” of <Initial Settings> (page
43).
Selecting the Receiving Band
1. Enter Menu List mode
Press the [MENU] button.
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “FM1”, “FM2”, “FM3” or “AM”.
Selecting the Receiving station or channel
Press the [4] or [¢] button.
During reception of stereo stations the “ST”
indicator lights up.
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
✍ Details of the station selecting in operation are
set in the “Seek Mode” of <HD Radio™ Setting>
1
2
3
Select the radio band you wish to store in the
preset memory
Enter Menu List mode
Press the [MENU] button.
Switching display
Press the [DISP] button to select display mode.
Selects the Information or Clock.
Enter Auto Memory Entry mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Display example of information display mode
Select “Settings” > “Auto Memory”.
4
Open Auto Memory Entry
Turn the [Volume] knob and press it when the
1
desired item is displayed.
Select “YES”.
When 6 stations that can be received are put in the
2
memory, auto memory entry closes.
⁄
•
This setting can be made when “Type Normal” is selected
|
64 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset Tuning
HD Radio™ Setting
Recalling the stations in the memory.
You can select following HD Radio Setting items.
1
2
Select the radio band
1
2
Select the HD Radio source
Enter Menu List mode
Press the [MENU] button.
Enter Menu List mode
Press the [MENU] button.
3
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Settings”.
3
Select a desired station in the memory
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “List & Memory” > Preset number.
4
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Display
Overview
“Settings”
“Seek Mode”
Selects the tuning mode of the radio.
“Auto1”: Automatic search for a station.
“Auto2”: Search in order of the stations in the
Preset memory.
“Manual”: Normal manual tuning control.
“Auto Memory” Memorizes 6 stations with good reception
automatically.
“YES”/ “NO”
“Receive Mode” Sets the receive mode of the HD Radio receiver.
“Auto”: Automatically tunes to analog broadcast
when there is no digital broadcast.
“Digital”: Digital broadcasts only.
“Analog”: Analog broadcasts only.
“TAG Memory”*1 Displays the tag memory usage of HD Radio
receiver. Up to 50 tags can be registered to
this unit.
“##/50”
“Tagging”*1
Turns ON / OFF the tag memory function of HD
Radio receiver.
“ON”/ “OFF”
(
: Factory setting)
*1 Only with KTC-HR300 (optional accessory) connected
5
6
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
English
|
65
Download from Www.Somanuals.com. All Manuals Search And Download.
HD Radio™ Tuner Control (Optional)
Function of KTC-HR300 (optional accessory)
Function of remote control
Function of KTC-HR300 (optional accessory)
iTunes Tagging
Direct Access Tuning
Using an iTunes Tagging enabled HD Radio receiver
you can tag your music. When you hear a song you
enjoy on your local HD Radio station, you only have
to press the [SEARCH MODE] button. The song’s
information will then be saved on this unit. The
saved songs will then show up in a playlist called
“Tagged” in iTunes the every next time you sync
your iPod to your computer. So then you just need
to click and then easily buy and download the song
you were tagging directly from the Apple iTunes
Music Store.
Tuning in a desired radio station by entering the
frequency.
1
2
Select the radio band
Enter Direct Access Tuning mode
Press the [DIRECT] button.
“– – – –” is displayed.
3
Select Tuning item
Press the [DIRECT] button.
Pressing the [DIRECT] button each time switches
the tuning items as follows.
1
Saves Song’s Information.
Press the [SEARCH MODE] button.
Items
Frequency
Channel
Cancelling Direct Access Tuning
Display
“– – – –”
“HD –”
—
“
” will be displayed when song information
TAG
can be registered.
⁄
•
when using this function.
4
5
Enter the frequency or channel
Press the number buttons.
Example of frequency input:
•
Up to 50 TAGs (song’s information) can be registered to
this unit. When iPod is connected, the TAG information
registered to this unit is transferred to the connected
iPod.
Desired frequency
92.1 MHz (FM)
810 kHz (AM)
Press button
[9], [2], [1]
[8], [1], [0]
•
The memory usage can be checked by selecting “TAG
Tune in to the entered frequency or channel
Press the [4] or [¢] button.
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
⁄
•
You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
|
66 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
English
|
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations of Remote Control
In Tuner source
• Band select: [FM+]/[AM–]
• Station select: [4]/[¢]
• Recall preset stations: [1] — [0] and [ENT]
Example:
VOL
SRC
ATT
ENT/ 38
Desired preset number Press button
1
6
[1], [ENT]
[6], [ENT]
5/∞
AUD
EXIT
10
18
[1], [0], [ENT]
[1], [8], [ENT]
AM–
FM+
0 — 9
In USB/ Internal Memory source
• Music select: [4]/[¢]
DIRECT
• Folder select: [FM+]/[AM–]
• Pause/Play: [38]
• Movement between Menu List mode: [5]/[∞]
• Return to previous folder: [
]
General control
In iPod source
• Volume control: [VOL]
• Source select: [SRC]
• Volume reduce: [ATT]
When the button is pressed again, the volume
returns to the previous level.
• Return to previous item: [
• Exit from mode: [EXIT]
• Selection of item: [5]/[∞]
• Determination: [ENT]
• Movement between Menu List mode:
[5]/[∞]
• Return to previous item: [
• Music select: [4]/[¢]
• Pause/Play: [38]
]
]
In Satellite Radio tuner source
• Preset band select: [FM]
• Channel select: [4]/[¢]
• Recall preset channels: [1] — [6]
• Enter Audio Control mode: [AUD]
In HD Radio source
• Band select: [FM+]/[AM–]
• Station select: [4]/[¢]
• Recall preset stations: [1] — [6]
|
68 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Hands-free phone control
Preparing the remote control unit
Making a call
Pull the battery sheet out from the remote control
unit to the direction of the arrow.
• Enter the dialing method selection mode: [
• Select a dialing method: [ENT]
• Number dial input:
]
Input a digit: [0] – [9]
Input “+”: [¢]
Input “#”: [FM+]
Input “*”: [AM–]
Clear the entered phone number: [4]
• Make a call: [DIRECT]
Changing the battery of the remote control
unit
Receiving a call
Use a commercially available
button battery (CR2025).
Insert the battery with the +
and – poles aligned properly,
following the illustration
inside the case.
Push on slide
• Answer the call: [
]
• Switch between the private talk mode and the
hands-free talk mode: [ENT]
CR2025
(+side)
Pull out
Call waiting
• Answer Another Incoming Call with the Current
Call Suspended: [
]
• Answer another Incoming Call after Terminating
the Current Call: [SRC]
• Continue the Current Call: [1]
During a call
• End the call: [SRC]
¤ CAUTION
• Do not set the remote control in hot places such
as on the dashboard.
• Lithium battery.
Danger of explosion if the battery is incorrectly
replaced.
Replace only with the same or equivalent type.
• The battery pack or batteries shall not be exposed
to excessive heat such sunshine, fire or the like.
• Keep battery out of reach of children and in
original package until ready to use. Dispose of
used batteries promptly. If swallowed contact
physician immediately.
English
|
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Acceptable USB device file system, file and folder
names and playing order are the same as those for
audio files. See <About Audio files>.
About Audio file
•
Playable Audio file
AAC-LC (.m4a)
MP3 (.mp3)
WMA (.wma)
Linear PCM (WAV) (.wav)
Acceptable Album art
MP3 ID3 v2.3
JPEG (Max. 500 KB)
About Picture files
•
Acceptable picture files
JPEG (.jpg)
•
BMP (.bmp)
•
Acceptable media
Mass-storage-class USB device
•
•
Playable USB device
USB mass storage class
Acceptable USB device file system, file and folder
names and playing order are the same as those for
audio files. See <About Audio files>.
Playable USB device file system
FAT16, FAT32
Although the audio files are complied with the
standards listed above, the play maybe impossible
depending on the types or conditions of media or
device.
iPod/iPhone that can be connected to this
unit
•
Playing order of the Audio file
In the example of folder/file tree shown below, the
files are played in the order from ① to ⑩.
Made for
• iPod touch (4th generation) • iPod touch (3rd generation)
• iPod touch (2nd generation)• iPod touch (1st generation)
^
¡
: Foder
:
Audio file
• iPod classic
• iPod with video
Folder
Root
(1)
• iPod nano (6th generation) • iPod nano (5th generation)
• iPod nano (4th generation) • iPod nano (3rd generation)
• iPod nano (2nd generation)• iPod nano (1st generation)
• iPhone 4G
• iPhone 3G
¡!
2
3
• iPhone 3GS
• iPhone
¡"
¡#
4
(As of April 2011)
¡$
5
• Latest compatible list of iPod/iPhone. For details,
• Type of control available varies depending on the
type of connected iPod. For details, see above URL.
¡%
¡P
• The word “iPod” appearing in this manual indicates
the iPod or the iPhone connected with the iPod
connection cable* (optional accessory).
* Not supported model KCA-iP500.
Refer to the web site for connectable iPod and iPod
connection cable.
• Do not use a USB cable to extend the iPod
connection cable.
An online manual about audio files is put on the site,
www.kenwood.com/cs/ce/audiofile/. On this online
manual, detailed information and notes which are not
written in this manual are provided. Make sure to read
through the online manual as well.
⁄
•
In this manual, the word “USB device” is used for flash
memories and digital audio players which have USB
terminals.
⁄
• If you start playback after connecting the iPod, the
music that has been played by the iPod is played
first.
In this case, “RESUMING” is displayed without
displaying a folder name, etc. Changing the browse
item will display a correct title, etc.
About Video files
•
Acceptable video files
H.264/MPEG-4 AVC (.mp4, .avi : Baseline Profile)
MPEG-4 (.mp4, .avi : Simple Profile)
WMV 9 (.wmv)
•
•
Picture size
Recommended: 320 x 240 (QVGA)
Minimum: 160 x 120
Acceptable media
Mass-storage-class USB device, iPod
• You cannot operate iPod if “KENWOOD” or “✓”
displayed on iPod.
|
70 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
About PANDORA® internet radio
The requirements for listening to PANDORA® internet
radio are as follows:
• Use an Apple iPhone or iPod touch running under
iOS3 or later.
• Install the latest version of the PANDORA®
application on your iPhone. (Search for “PANDORA”
in the Apple iTunes App Store to find and install the
most current version.)
About USB hub
• You can use the USB hub with up to 3 ports. The
USB hub with 4 and more ports can also be used,
but available ports are up to 3 of them.
• Do not connect more than 2 USB hubs to this unit.
This unit cannot recognize the USB hubs if more
than 2 USB hubs are connected.
• Only one iPod can be connected to a USB hub.
• The iPod connected to the USB hub charged.
• Create an account with PANDORA®. (If you are
not already a registered user, an account can be
established at www.pandora.com.)
• Connect the Multi Card Reader directly to this unit.
if connected to an USB hub, proper operation of the
unit is not guaranteed.
• Internet connection by 3G, EDGE, or WiFi.
• iPhone/ iPod connected to this unit with a KCA-
IP202.
• Playback cannot be resumed if more than one USB
devices of the same model are connected to the
USB hub.
⁄
About “KENWOOD Music Editor”
• This unit supports the PC application “KENWOOD
Music Editor Light ver1.1” or later.
• When you use the audio file with database
information added by the “KENWOOD Music Editor
Light ver1.1”, you can search a file by title, album or
• In the Instruction manual, the term “Music Editor
media” is used to mean the device that contains
audio files with database information added with
KENWOOD Music Editor.
• “KENWOOD Music Editor Light ver1.1” is available
from the following web site:
•
•
The Pandora service is available only in the U.S.
Because PANDORA® internet radio is a third-party service,
the specifications are subject to change without prior
notice. Accordingly, compatibility may be impaired or some
or all of the services may become unavailable.
Some PANDORA® functionality cannot be operated from
this unit.
•
•
For issues using the PANDORA® application, please contact
Pandora at [email protected]
About USB device
• When the USB device is connected to this unit,
it will be charged from the unit when the unit is
turned on.
• For further information on “KENWOOD Music
Editor Light ver1.1”, refer to the site above or the
application help.
• Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
• Take backups of the audio files used with this unit.
The files can be erased depending on the operating
conditions of the USB device.
We shall have no compensation for any damage
arising out of erasure of the stored data.
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
• This unit cannot recognize a USB device whose
rating is other than 5 V and exceeds 500 mA.
• When connecting the USB device, usage of the
CA-U1EX (option) is recommended. The maximum
current consumption of the CA-U1EX is 500 mA.
• Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than 4 m can result in abnormal playback.
Next page 3
English
|
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
About the Cell-Phone
This unit conforms to the following Bluetooth
specifications:
Menu List
Common function items
Display
“Settings”
Page
–
KIV-BT901
Version
Profile
Bluetooth Standard Ver. 2.0
HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
SYNC (Synchronization Profile)
“Clock & Date”
“Clock Adjust”
“Time Synchronized”
“Summer Time”
“Sub Clock Adjust”
“Date Adjust”
KIV-701
You need to register your cell-phone to your
Bluetooth Unit beforehand. Make sure to read the
instruction manual of the Bluetooth Unit as well.
For the cell-phones verified for compatibility, access
the following URL:
“Date Mode”
“Display & Illumination”
“Display Select”
“Type Select”
–
–
“Side Select”
“Text Select”
“Graphic Select”
“Display Off Mode”
“Display Dimmer”
“Text Scroll”
“Key Color Select”
“Key ILLUMI Dimmer”
“ILLUMI Effect”
“ILLUMI Music SYNC”
“Aspect Set”
⁄
•
The units supporting the Bluetooth function have been
certified for conformity with the Bluetooth Standard
following the procedure prescribed by Bluetooth
SIG. However, it may be impossible for such units to
communicate with your cell-phone depending on its type.
HFP is a profile used to make a hands-free call.
OPP is a profile used to transfer data such as a phone book
between units.
•
•
“Monitor Setup”
“Tuner Settings”
“TI”
About Satellite Radio tuner (Optional)
This unit supports Satellite Radio tuners which are
released by SIRIUS and XM.
–
“DEMO Mode”
Refer to the instruction manual of Satellite radio tuner.
Function items appearing during standby
Display
“Settings”
Page
–
–
–
–
About HD Radio Reception (Optional)
When you connect an HD Radio tuner, Tuner features
of the unit are disabled and changed to HD Radio
tuner features. With the HD Radio tuner, you can use
the similar functions of Tuner features.
“Clock & Date”
“Display & Illumination”
“Initial Settings”
“Tuner Preset Type”
“Source Select”
“Beep”
“Menu Language Select”
“Pandora Source”
“Built in AUX”
“Built in AMP”
“AV Out Set”
“R-CAM Interruption”
“R-CAM Mirror”
“System F/W Update”
|
72 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Function items appearing when the iPod source
is selected
Function items appearing when the USB source
is selected
Display
“Music”
Page
Display
“USB List”
Page
“Playlists”
“Artists”
“Albums”
“Songs”
“Copy from USB”
“Play Mode”
“File Scan”
“Folder Random”
“Podcasts”
“Genres”
“Composers”
“Audiobooks”
“All Random”
“File Repeat”
“Folder Repeat”
“Port Up”
–
“Videos”
“Drive Select”
“Slide”
“Save as Wallpaper”
“Settings”
“Video Playlists”
“Movies”
“Music Videos”
“TV Shows”
“Video Podcasts”
“Rentals”
“Device F/W Version”
“Device F/W Update”
“Clock & Date”
“Display & Illumination”
“Tuner Settings”
–
–
–
“Play Mode”
“iPod By Hand Mode”
“Folder Random”
“All Random”
Function items appearing when the Music
Editor media source is selected
Display
“File Repeat”
Page
“Port Up”
“Settings”
“Skip Search”
–
“Music”
“Playlists”
“Artists”
“Albums”
“Songs”
“Device F/W Version”
“Delete My Playlist”
“Audiobook Speed”
“Sound Check”
“Clock & Date”
“Display & Illumination”
“Tuner Settings”
“Genres”
“Copy from USB”
“Play Mode”
–
–
–
“File Scan”
“Folder Random”
“File Repeat”
Function items appearing when the Pandora
source is selected
Display
“Stations”
“New Stations”
“Bookmarks”
“Bookmark Song”
“Bookmark Artist”
“Station Delete”
“Port Up”
“Settings”
“Port Up”
“Drive Select”
“Settings”
–
Page
“Skip Search”
“Device F/W Version”
“Device F/W Update”
“Clock & Date”
“Display & Illumination”
“Tuner Settings”
–
–
–
–
“Clock & Date”
–
“Display & Illumination”
“Tuner Settings”
–
–
Next page 3
English
|
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Function items appearing when the Zune
Function items appearing when the Disc
source is selected
Display
changer source is selected
Display
Page
Page
“Music”
“Play Mode”
“Genres”
“Track Scan”
“Artists”
“Disc Random”
“Albums”
“Songs”
“Magazine Random”
“Track Repeat”
“Playlists”
“Disc Repeat”
“Play Mode”
“File Scan”
“Folder Random”
“File Repeat”
“Port Up”
“Settings”
–
–
–
–
“Clock & Date”
“Display & Illumination”
“Tuner Settings”
–
Function items appearing when the Tuner
source is selected
Display
“List & Memory”
“FM”
“AM”
“Settings”
“Skip Search”
“Device F/W Version”
“Clock & Date”
“Display & Illumination”
“Tuner Settings”
Page
–
–
–
“PTY Search”
“Settings”
–
Function items appearing when the Internal
memory source is selected
Display
“Internal Memory List”
“Play Mode”
“Seek Mode”
“Auto Memory”
“TI”
“TAG Memory”
“Tagging”
Page
“File Scan”
“Forced MONO”
“Clock & Date”
“Display & Illumination”
“Folder Random”
“All Random”
“File Repeat”
“Folder Repeat”
“Settings”
–
–
Function items appearing when an AUX source
is selected
Display
–
“Internal Memory Delete”
“Internal Memory Format”
“Clock & Date”
“Display & Illumination”
“Tuner Settings”
Page
–
–
–
–
“Settings”
–
–
–
“Name Set”
“Clock & Date”
“Display & Illumination”
“Tuner Settings”
|
74 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Function items appearing when the Hands-Free
source is selected
Function items appearing when the Satellite
Radio tuner source is selected
Display
Page
Display
Page
“Preset Call”
“Phonebook”
“Outgoing Calls”
“Incoming Calls”
“Missed Calls”
“SMS Inbox”
“Number Dial”
“Voice Recognize”
“BT Settings”
“Pairing”
“List & Memory”
“SR1”/“XM1”
“SR2”/“XM2”
“SR3”/“XM3”
“SR4”/“XM4”
“Channel Search”
“Channel Scan”
“Settings”
–
–
“Seek Mode”
“ESN”
–
“Device Registration”
“Clock & Date”
“Display & Illumination”
“Tuner Settings”
–
–
–
“Phone Selection”
“Audio Selection”
“Special Device Select”
“Device Delete”
–
Function items appearing when the HD Radio™
tuner source is selected
Display
“List & Memory”
“FM1”
“FM2”
“SMS Download”
“Voice Tag”
“Detailed Setup”
Page
“PIN Code Edit”
“Auto Answer”
“Auto Reconnect”
“Bluetooth HF”/
“Bluetooth HF/Audio”
“Call Beep”
“BT F/W Update”
“Mic Gain”
“Noise Reduction”
“Echo Cancel Level”
“FM3”
“AM”
“Settings”
–
“Seek Mode”
“Auto Memory”
“Receive Mode:”
“TAG Memory”
“Tagging”
“Clock & Date”
“Display & Illumination”
–
–
Function items appearing when the Bluetooth
Audio source is selected
Display
Page
“Settings”
–
“Pairing”
“Device Registration”
–
“Audio Selection”
“Special Device Select”
“Device Delete”
“Detailed Setup”
“PIN Code Edit”
“Bluetooth HF”/
“Bluetooth HF/Audio”
“BT F/W Update”
“Clock & Date”
“Display & Illumination”
“Tuner Settings”
–
–
–
English
|
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Display Indicator items
Time zone list
Source Display Overview
Continent
Area
City
Hawaii
Alaska
Pacific Time
Arizona
Mountain Time
Central Time
Eastern time
Indiana
Atlantic Time
Mid-Atlantic
W.Central Africa
Abu Dhabi
Adelaide
Amman
Amsterdam
Anchorage
Ankara
Athens
Atlanta
Auckland
Baghdad
Baku
Bangkok
Beijing
Time Difference
–10:00
–9:00
–8:00
–7:00
–7:00
–6:00
–5:00
–5:00
–4:00
–2:00
+1:00
+4:00
+9:30
+2:00
+1:00
–9:00
+2:00
+2:00
–5:00
+12:00
+3:00
+4:00
+7:00
+8:00
+2:00
+1:00
–5:00
–3:00
+1:00
+2:00
+1:00
–3:00
+2:00
–1:00
–4:30
–6:00
+1:00
–7:00
–5:00
+6:00
+5:00
+2:00
+2:00
+8:00
+5:00
+2:00
+7:00
+2:00
+2:00
+4:30
General “ATT”
iPod/ USB “MP3”
“WMA”
Indicates that the attenuator is active.
Identifies the MP3 file.
Identifies the WMA file.
Identifies the AAC-LC file.
Identifies the WAVE file.
Identifies the MPEG4 file.
Identifies the H.264 file.
Identifies the WMV file.
Indicates that the Scan function is ON.
“AAC”
“WAV”
“MPG4”
“H.264”
“WMV”
“SCAN”
“Fo•RDM” Indicates that the Folder Random function is ON.
“ALL•RDM” Indicates that the All Random function is ON.
“Fo•REP” Indicates that the Folder Repeat function is ON.
“Fi•REP” Indicates that the File Repeat function is ON.
City
CD
Changer
“SCAN”
“RDM”
Indicates that the Scan function is ON.
Indicates that the Track Random function is ON.
“M•RDM” Indicates that the Magazine Random function is ON.
“D•REP”
“T•REP”
“REP”
“ST”
Indicates that the Disc Repeat function is ON.
Indicates that the Track Repeat function is ON.
Indicates that the Repeat function is ON.
Indicates that stereo broadcast is being received.
Indicates the reception state of traffic information. (On: TP
is being received. Blinking: TP is not being received.)
Indicates that Tagging is enabled.
Tuner
“TI”
“TAG”
HD Radio “HD A”
“HD D”
Indicates that analog broadcast is being received.
Indicates that digital broadcast is being received.
Indicates whether the reception channel is main or sub.
(On: The channel is main. Blinking: The channel is sub.)
Indicates that Multi channel is being received.
Indicates that stereo broadcast is being received.
Indicates that Tagging is enabled.
“M/S”
Beirut
Berlin
Bogotá
Brasilia
“MC”
“ST”
“TAG”
Hands- “BT”
Free
Bluetooth cell-phone connection status.
Battery level of cell-phone.
Brussels
“
“
“
”
”
”
Bucharest
Budapest
Buenos Aires
Cairo
Cape Verde Is.
Caracas
Chicago
Copenhagen
Denver
Detroit
Dhaka
Ekaterinburg
Harare
Helsinki
Full
>
>
>
Nearly dead
Indicates that the battery level of cell-phone cannot be
obtained.
Signal strength of cell-phone.
Maximum
>
>
>
Minimum
Indicates the out of coverage zone.
Indicates that the signal strength of cell-phone cannot
be obtained.
“
“
”
”
“CALL WAIT” Indicates call-waiting.
“PRIVATE” Indicates that cell-phone is busy in the private mode.
Hong Kong
Islamabad
Istanbul
Jakarta
Jerusalem
Johannesburg
Kabul
|
76 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Continent
City
Time Difference
–6:00
Kansas City
Kathmandu
Kingston
Krasnoyarsk
Kuala Lumpur
Kuwait
Kyiv
Las Vegas
Lima
London
Los Angeles
Madrid
Magadan
Manila
Mexico City
Midway Is.
Minsk
+5:45
–5:00
+7:00
+8:00
+3:00
+2:00
–8:00
–5:00
+0:00
–8:00
+1:00
+11:00
+8:00
–6:00
–11:00
+2:00
+3:00
+3:00
+11:00
+5:30
–6:00
–5:00
–3:30
+6:00
+13:00
+1:00
–5:00
–5:00
+1:00
+1:00
+1:00
–8:00
–4:00
+1:00
–8:00
+8:00
+3:00
+1:00
+10:00
+8:00
+3:30
+9:00
–5:00
+1:00
–8:00
+1:00
+1:00
+6:30
+1:00
+1:00
Moscow
Nairobi
New Caledonia
New Delhi
New Orleans
New York
Newfoundland
Novosibirsk
Nuku’alofa
Oslo
Ottawa
Panama
Paris
Prague
Rome
San Francisco
Santiago
Sarajevo
Seattle
Singapore
St. Petersburg
Stockholm
Sydney
Taipei
Tehran
Tokyo
Toronto
Tunis
Vancouver
Vienna
Warsaw
Yangon
Zagreb
Zurich
(GMT)
English
|
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
FCC WARNING
IC (Industry Canada) Notice
This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless
the modifications are expressly approved in the
instruction manual. The user could lose the authority
to operate this equipment if an unauthorized change
or modification is made.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation
of the device.
The term “IC: ” before the certification/registration
number only signifies that the Industry Canada
technical specification were met.
FCC NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment may cause harmful interference to radio
communications, if it is not installed and used in
accordance with the instructions. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
2CAUTION
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65 and
RSS-102 of the IC radio frequency (RF) Exposure rules.
This equipment has very low levels of RF energy that
it deemed to comply without maximum permissive
exposure evaluation (MPE). But it is desirable that it
should be installed and operated keeping the radiator
at least 20cm or more away from person’s body
(excluding extremities: hands, wrists, feet and ankles).
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
• Consult the dealer or an experienced radio/TV
technician for help.
CALIFORNIA, USA ONLY
•
•
Contains Transmitter Module
FCC ID : RKXCK5000NVIA
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material – special handling
may apply.
Contains Transmitter Module
IC : 5119A-CK5000NVIA
|
78 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories/ Installation Procedure
•
If the power is not turned ON (“Protect” is displayed), the
speaker wire may have a short-circuit or touched the
chassis of the vehicle and the protection function may
have been activated. Therefore, the speaker wire should be
checked.
If your car’s ignition does not have an ACC position, connect
the ignition wires to a power source that can be turned on
and off with the ignition key. If you connect the ignition
wire to a power source with a constant voltage supply, as
with battery wires, the battery may die.
If the fuse blows, first make sure the wires aren’t touching
to cause a short circuit, then replace the old fuse with one
with the same rating.
Insulate unconnected wires with vinyl tape or other similar
material. To prevent a short circuit, do not remove the caps
on the ends of the unconnected wires or the terminals.
Connect the speaker wires correctly to the terminals to
which they correspond. The unit may be damaged or fail to
work if you share the - wires or ground them to any metal
part in the car.
When only two speakers are being connected to the
system, connect the connectors either to both the front
output terminals or to both the rear output terminals (do
not mix front and rear). For example, if you connect the +
connector of the left speaker to a front output terminal, do
not connect the - connector to a rear output terminal.
After the unit is installed, check whether the brake lamps,
blinkers, wipers, etc. on the car are working properly.
Reception may drop if there are metal objects near the
Bluetooth antenna.
Accessories
1
2
3
4
5
•
..........1
..........2
..........4
..........4
6
•
•
•
7*
2 m (6.5 ft) ...1
3 m (9.5 ft) ...1
5 m (16.4 ft) ...1
•
* KIV-BT901 only
Installation Procedure
1
To prevent a short circuit, remove the key from the
ignition and disconnect the - battery.
•
•
2
Make the proper input and output wire
connections for each unit.
3
4
Connect the speaker wires of the wiring harness.
Connect the wiring harness wires in the following
order: ground, battery, ignition.
5
6
7
8
Connect the wiring harness connector to the unit.
Install the unit in your car.
Reconnect the - battery.
While pressing the [Volume] knob and the [MENU]
button, press the [SRC] button for at least 3
seconds. See <How to reset your unit> (page 3).
Bluetooth antenna unit
For Good Reception
To assure good reception, note the following:
• Communicate with the cell-phone within the line-
of-sight distance of 10 m (30 ft). The communication
range becomes shorter depending on the
surrounding environment. The communication
range also becomes shorter when there is an
obstacle between this unit and the cell-phone. The
above maximum communication range (10 m) is
not always assured.
2WARNING
If you connect the ignition wire (red) and the battery wire
(yellow) to the car chassis (ground), you may cause a short
circuit, that in turn may start a fire. Always connect those
wires to the power source running through the fuse box.
¤
•
• A broadcast station or walkie-talkie located nearby
can interfere with communication due to too strong
signal.
Mounting and wiring this product requires skills and
experience. For safety’s sake, leave the mounting and wiring
work to professionals.
•
•
Make sure to ground the unit to a negative 12V DC power
supply.
Do not install the unit in a spot exposed to direct sunlight
or excessive heat or humidity. Also avoid places with too
much dust or the possibility of water splashing.
Do not use your own screws. Use only the screws provided.
If you use the wrong screws, you could damage the unit.
•
English
|
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Wires to Terminals
Do not remove the cap when you do
⁄
For the sake of safety, be sure to connect the
parking sensor.
not use the USB cable. The connector
Connect to the vehicle’s parking brake
USB device
(commercially
available)
will cause the unit to malfunction if it
gets in touch with any metallic part
of the vehicle.
⁄
detection switch harness.
Light Green
(Accessory 3)
Light Green (Parking sensor wire)
CA-U1EX
(option)
iPod
(commercially
available)
Purple/White (Reverse sensor wire)
Connect to vehicle’s reverse lamp
harness when using the optional
rear view camera.
USB connector
(1m (3.2 ft))
Purple/White
(Accessory 4)
KCA-iP202
(option)
Rear View Camera Input
Rear output
L
Front output
R
Sub Woofer output
Antenna Cord
Microphone input
(KIV-BT901 only)
Microphone
(Accessory 7)
(KIV-BT901 only)
FM/AM antenna input (JASO)
R
L
AUX input (Stereo)
Fuse (10A)
Use the mini-plug (3.5 mm ø) which
is stereo type and does not have any
resistance.
Wiring harness (Accessory 1)
White
To Kenwood disc changer/External optional
accessory
White/Black
To front left speaker
To connect these leads, refer to the
relevant instruction manuals.
⁄
Gray
Gray/Black
To front right speaker
To rear left speaker
To rear right speaker
Green
Green/Black
Purple
If no connections are made, do not
let the wire come out from the tab.
Purple/Black
Blue/White
When using the optional power amplifier, connect to its power control
terminal.
P.CONT
(Power control wire)
Blue
Depending on what antenna you are using, connect either to the control
terminal of the motor antenna, or to the power terminal for the booster
amplifier of the film-type or short pole type antenna.
ANT.
(Antenna control wire)
CONT
Brown
To connect the Kenwood navigation system, consult your navigation
manual.
MUTE
(Mute control wire)
Connect to the terminal that is grounded when either the telephone
rings or during conversation. (KIV-701 only)
⁄
Light Blue/Yellow
To use the steering wheel remote control feature, you need to an exclusive
remote adapter (not supplied) matches your car is required.
REMOTECONT.
(Steering remote control wire)
STEERING WHEEL
REMOTEINPUT
Orange / White
To car light control switch
Ignition key switch
ACC
ILLUMI
(Dimmer control wire)
Red (Ignition wire)
Car fuse box
(Main fuse)
Yellow (Battery wire)
Car fuse box
Battery
Black (Ground wire) · (To car chassis)
|
80 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Removing the Unit
Non-Japanese Cars
Removing the Hard Rubber Frame
1
Engage the catch pins on the removal tool and
remove the two locks on the upper level.
Lift up and pull the frame forward as shown in the
figure.
Lock
Catch
Bend the tabs of the mounting
sleeve with a screwdriver or similar
tool and attach it in place.
Accessory 2
⁄
Removal tool
•
Make sure that the unit is installed securely in place. If the
unit is unstable, it may malfunction (for example, the sound
may skip).
2
When the upper level is removed, remove the
lower two locations.
⁄
•
The frame can be removed from the bottom side in the
same manner.
Japanese Cars
1
Refer to the section <Removing the Hard Rubber
Frame> and then remove the hard rubber frame.
Removing the Unit
2
Align the holes in the unit (two locations on each
side) with the vehicle mounting bracket and secure
the unit with the accessory screws.
1
2
3
Refer to the section <Removing the Hard Rubber
Frame> and then remove the hard rubber frame.
Insert the two removal tools deeply into the slots
on each side, as shown.
Lower the removal tool toward the bottom, and
pull out the unit halfway while pressing towards
the inside.
T
N
T/N
T
N
T: Toyota cars
N: Nissan cars
Accessory 2
8 mm
MAX.
8mm
MAX.
5
6
ø5mm
ø5mm
Accessory 5...for Nissan car
Accessory 6...for Toyota car
¤
•
Be careful to avoid injury from the catch pins on the
removal tool.
4
Pull the unit all the way out with your hands, being
careful not to drop it.
¤ CAUTION
Install this unit in the console of your vehicle.
Do not touch the metal part of this unit during and
shortly after the use of the unit. Metal part such as
the heat sink and enclosure become hot.
English
|
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Removing the Unit
Troubleshooting Guide
Accessory of KIV-BT901
Some functions of this unit may be disabled by
some settings made on this unit.
Installation the Microphone Unit
1
Check the installation position of the microphone
(accessory 7).
Remove oil and other dirt from the installation
surface.
Install the microphone.
!
• Cannot set up the subwoofer.
• No output from the subwoofer.
• Cannot set up the subwoofer position of Manual
position setting.
• The Dual zone function is enabled.
2
3
4
Wire the cable up to the unit with it secured at
several positions using tape or the like.
• In the speaker select option, None is selected for
the subwoofer.
!
• Cannot set up the equalizer.
• Cannot set up the Bass Boost.
• Cannot set up the Highway sound.
• Cannot set up the Supreme.
Accessory 7
• Cannot set up the Position control.
• The Dual zone function is enabled.
• The DSP function is disabled.
• In the speaker select option, None is selected for
the rear speakers.
!
• Cannot select the output destination of the
subsource in the Dual zone.
Fix a cable with a commercial
item of tape.
• Cannot adjust the volume of the rear speakers.
The Dual zone function is disabled.
!
!
• Cannot set up Display.
turned off.
• Cannot switch to USB/iPod or Internal Memory
source.
• The Dual zone function is set to USB/iPod or
Internal Memory.
Peel the release coated paper of double-face adhesive tape to
fix on the place shown above.
!
The number of songs contained in “Songs”
category of this unit is different from that
contained in “Songs” category of iPod.
Podcast files are not counted in this unit as this unit
does not support the playback of podcast files.
Adjust the direction of the microphone to the driver.
⁄
•
Install the microphone as far away as possible from the cell-
phone.
|
82 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
Hands-free
? The hands-free talk volume is low.
The hands-free talk volume is set at a low level.
The hands-free talk volume can be adjusted
independently. Adjust it during hands-free talk.
“Mic Gain”, “Noise Reduction” and “Echo Cancel
General
? The Touch Sensor Tone does not sound.
The preout jack is being used.
? No sound is heard from the rear speakers.
You are talking in the hand-free talk mode.
The Touch Sensor Tone cannot be output from
the preout jack.
No sound is heard from the rear speakers in the
hands-free talk mode.
? The illumination flashes when the knob or button
is operated.
? No beep is heard at reception of an incoming call.
This is the key illumination effect.
No beep is heard depending on the type of your
cell-phone.
You set this effect in “ILLUMI Effect” of <Display
set ON.
? The key illumination effect brought about in
conjunction with the sound volume is small.
? Voice is not recognized.
The key illumination effect may be insufficient
The vehicle window is open.
depending on the sound volume and sound quality.
If the surrounding noise is large, voice cannot be
recognized properly. Close the vehicle windows
to reduce noise.
? No image is output from the AV Output terminal of
iPod.
Small voice.
If voice is too small, it cannot be recognized
“AV Out Set” is not set properly.
set ON.
properly. Speak into the microphone a little more
loudly and naturally.
The person uttering the voice tag is not the one who
registered the it.
The Internal Memory source or Pandora source is
selected.
Since the Internal Memory source or Pandora
source cannot be used together with the iPod
source, the output from the AV Output terminal
stops.
Only the voice of the person who registered the
voice tag can be recognized.
Bluetooth audio source
Tuner source
? The Bluetooth audio player cannot be registered
? Radio reception is poor.
(pairing).
The car antenna is not extended.
The PIN code is fixed.
Pull the antenna out all the way.
When a PIN code is specified in the Instruction
Manual for Bluetooth Audio Player, register it
with reference to <Registering PIN Code> (page
57) to register the Bluetooth audio player. If no PIN
code is specified in the Instruction Manual, try
“0000”.
Audio file source
? The sound skips when an Audio file is being
played.
The recording condition is bad.
Record the media again or use another media.
? The sound from the Bluetooth audio player is
discontinuous.
The distance between this unit and audio player is
too far.
Move the audio player nearer to this unit.
Another Bluetooth device is affecting the Bluetooth
communication.
Turn off another Bluetooth device.
Move another Bluetooth device away from this
unit.
Another Bluetooth device or profile is used for
communication.
The downloading of the Phone book or the SMS
disconnects the sound.
English
|
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
USB ERROR:
iPod Error:
Some trouble may have occurred to the
connected USB device.
Remove the USB device, then cycle the
power switch to ON. If the same display is
repeated, use another USB device.
The messages shown below display your
systems condition.
TOC Error:
• No disc has been loaded in the disc
magazine.
• The CD is quite dirty. The CD is upside-
down. The CD is scratched a lot.
Connection to the iPod has failed.
Remove the USB device and then
reconnect it.
Error 05:
Error 77:
The disc is unreadable.
Reset the iPod.
The unit is malfunctioning for some reason.
Press the reset button on the unit. If the
“Error 77” code does not disappear, consult
your nearest service center.
USB REMOVE (Blink):
The Remove mode has been selected for the
USB device/iPod. You can remove the USB
device/iPod safely.
Error 99:
Something is wrong with the disc magazine.
Or the unit is malfunctioning for some reason.
Check the disc magazine. And then press
the reset button on the unit. If the “Error
99” code does not disappear, consult your
nearest service center.
Over Capacity: Recording or copying was canceled because
internal memory space ran out while copying
from USB device.
Delete unnecessary files and record or
copy once more.
Copy Error:
• An incompatible digital audio player was
used.
• Cannot copy because the USB device is not
firmly inserted.
Protect (Blink): The speaker wire has a short-circuit or
touches the chassis of the vehicle, and then
the protection function is activated.
Wire or insulate the speaker cable properly
and press the reset button. If the “Protect”
code does not disappear, consult your
nearest service center.
Delete Error:
Format Error: Abnormal condition detected while deleting
or formatting.
Repeat the operation once more. This may
take some time. If the message recurs,
contact your nearest Kenwood dealer.
Unsupported File:
An Audio file is played with a format that this
unit can’t support.
Can’t Download:
Copy Protection:
Download Error:
A copy-protected file is played.
This unit does not work properly for some
reason.
Press the reset button to download it
again. If this error is still displayed, consult
a local Kenwood dealer.
Try all over again from the start. If this error
is still displayed, consult a local Kenwood
dealer.
Read Error:
The file system of the connected USB device
is broken.
Copy the files and folders for the USB
device again. If the error message is still
displayed, initialize the USB device or use
other USB devices.
No Device:
N/A Device:
The USB device is selected as a source
although no USB device is connected.
Change the source to any source other
than USB. Connect an USB device, and
change the source to USB again.
Writing Error: Writing failed while the file was downloaded.
Try the downloading again.
Tuner/ SIRIUS/ XM/ HD Radio reception
Memory Full: The TAG Memory of HD Radio receiver or
Radio Data System is full.
• An unsupported USB device is connected.
• Connection to the iPod has failed.
Check that the connected iPod is an iPod
that is supported. See <iPod/iPhone that
information on supported iPods.
iPod Full:
The iPod Memory is full.
No TAG Function:
iPod which does not support the TAG
Memory is connected.
No Media File/Error 15:
• The connected USB device contains no
N/A Channels: No receivable channel and category.
playable audio file.
• Media was played that does not have data
recorded that the unit can play.
No Access:
The procedure preset with mixed preset
memory function cannot be available.
The preset content may not be recalled
depending on the selected band or source.
|
84 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth
Pandora
No Number:
• The calling party does not notify a caller ID.
• There is no phone number data.
Pandora Error_01: Registration in Bookmark has failed.
Pandora Error_02: Deletion of the station has failed.
Pandora Error_03: Registration of the station has failed.
No Data:
• There is no outgoing call list.
• There is no incoming call list.
• There is no missed call list.
• There is no phone book list.
Pandora Error_04: The number of registerable stations has
been exceeded.
No Entry:
The cell-phone has not been registered
(pairing).
Pandora Error_05: Thumb up/down operation has failed.
Pandora Error_06: Search has failed.
HF Disconnect: The unit cannot communicate with the cell-
phone.
No Station:
No station is found.
HF Error 07:
The memory cannot be accessed.
Turn off the power and on again. If this
message still appears, press the reset
button on the control unit.
Not available:
The station does not have an available
song.
No skips remaining: The skip count limit has been exceeded.
Check Device:
Start the Pandora application of the
iPhone.
HF Error 68:
The unit cannot communicate with the cell-
phone.
Turn off the power and on again. If this
message still appears, press the reset
button on the control unit.
Un Known:
Device Full:
The Bluetooth device cannot be detected.
5 Bluetooth device have already been
registered. No more Bluetooth device cannot
be registered.
PIN Code NG: The PIN code is wrong.
Connect NG: The unit cannot be connected to the device.
Pairing Failed: Pairing error.
Err No Matching:
The voice tag is wrong. Voice cannot be
recognized because of an unregistered voice
tag, etc.
Too Soft:
Too Loud:
Too Long:
Voice is too small and cannot be recognized.
Voice is too large to be recognized.
The word or utterance is too long to be
recognized.
No Phonebook: Data is not contained in the phone book.
No Message: No short message in In Box.
No Voice Data: The voice tag is not registered in the phone
book.
Memory Full: The number of voice tags reaches the
maximum number to be registered in the
phone book.
No Voice:
No call.
English
|
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
FM tuner section
USB Interface
Frequency Range (200 kHz Space)
: 87.9 MHz – 107.9 MHz
USB Standard
: USB 2.0 (Full speed)
Usable sensitivity (S/N = 30dB)
: 9.3dBf (0.8 μV/75 Ω)
Maximum Supply current
: DC 5 V 1 A
Quieting Sensitivity (S/N = 50dB)
: 15.2dBf (1.6 μV/75 Ω)
File System
: FAT16/ 32
Frequency response ( 3 dB)
: 30 Hz – 15 kHz
D/A Converter
: 24 Bit
Signal to Noise ratio (MONO)
: 70 dB
Frequency response ( 1 dB)
: 10 Hz – 20 kHz
Selectivity ( 400 kHz)
: ≥ 80 dB
Signal to Noise ratio (1 kHz)
: 110 dB
Stereo separation (1 kHz)
: 40 dB
Dynamic range
: 93 dB
Video decode
: H.264/ MPEG4 AVC, MPEG 4, WMV
Audio decode
: MP3, WMA, AAC, WAV (Linear PCM)
AM tuner section
Frequency range (10 kHz space)
: 530 kHz – 1700 kHz
Usable sensitivity (S/N = 20dB)
: 28 dBµ (25 µV)
Monitor section
Picture Size
: 3 inches (diagonal) wide
: 65.52 mm (W) x 36.84 mm (H)
Display System
: Transparent TN LCD panel
Drive System
: TFT active matrix system
Number of Pixels
: 76,800 (320H x 240V x RGB)
Pixel Arrangement
: RGB delta arrangement
Back Lighting
: LED
Bluetooth section (KIV-BT901)
Version
: Bluetooth Ver. 2.0 Certified
Frequency range
: 2.402 – 2.480 GHz
Output Power
: +4dBm (MAX), 0dBm (AVE) Power Class 2
Maximum Communication range
: Line of sight approx.10m (32.8 ft)
Profiles
: HFP (Hands Free Profile)
: HSP (Headset Profile)
: SPP (Serial Port Profile)
: PBAP (Phone Book Access Profile)
: OPP (Object Push Profile)
: SYNC (Synchronization Profile)
|
86 KIV-BT901/ KIV-701
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio/ Video section
Maximum output power
: 50 W x 4
Full Bandwidth Power (at less than 1% THD)
: 22 W x 4
Speaker Impedance
: 4 – 8 Ω
Tone action
BAND1 (62.5 Hz): 9 dB
BAND2 (250 Hz): 9 dB
BAND3 (1 kHz): 9 dB
BAND4 (4 kHz): 9 dB
BAND5 (16 kHz): 9 dB
Preout level / Load (CD-CH)
: 4000 mV/10 kΩ
Preout impedance
: ≤ 600 Ω
iPod terminal
Video output level : 1 Vp-p/ 75 Ω
Audio output level : 1.2 V/ 10 kΩ
Auxiliary input
Frequency response ( 1 dB)
: 20 Hz – 20 kHz
Input Maximum Voltage
: 1200 mV
Input Impedance
: 10 kΩ
Rear view camera input
Input level
: 1 Vp-p/ 75 Ω (NTSC)
General
Operating voltage
KIV-BT901 (10.5 – 16V allowable) : 14.4 V
KIV-701 (11 – 16V allowable) : 14.4 V
Maximum Current consumption
: 10 A
Installation Size (W x H x D)
: 182 x 53 x 153 mm
7-3/16 x 2-1/16 x 6 inch
Weight
: 2.6 lbs (1.20 kg)
•
•
Specifications subject to change without notice.
Although the effective pixels for the liquid crystal panel is
given as 99.99% or more, 0.01% of pixels may not light or
may light incorrectly.
English
|
87
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Ready to receive HD Radio™ broadcasts when
connected to the KTC-HR300/ KTC-HR200/ KTC-
HR100TR, sold separately.
•
•
“Adobe Reader” is a trademark of Adobe Systems
Incorporated.
PANDORA, the PANDORA logo, and the Pandora trade
dress are trademarks or registered trademarks of
Pandora Media, Inc., used with permission.
•
•
The “AAC” logo is a trademark of Dolby Laboratories.
The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Kenwood Corporation is under license. Other
trademarks and trade names are those of their
respective owners.
•
Microsoft, Zune™ and the Zune™ logo are trademarks
of the Microsoft group of companies.
•
•
iTunes is a trademark of Apple Inc.
“Made for iPod” and “Made for iPhone” mean that an
electronic accessory has been designed to connect
specifically to iPod or iPhone, respectively, and has
been certified by the developer to meet Apple
performance standards. Apple is not responsible for
the operation of this device or its compliance with
safety and regulatory standards. Please note that the
use of this accessory with iPod or iPhone may affect
wireless performance.
This symbol mark indicates that
Kenwood manufactured this product
so as to decrease harmful influence on
the environment.
•
iPhone, iPod, iPod classic, iPod nano, and iPod touch
are trademarks of Apple Inc., registered in the U.S. and
other countries.
Download from Www.Somanuals.com. All Manuals Search And Download.
|