dissipation and shorten the life of the bulb. Use two fingers and pull the
bulb out touching the metal part of the bulb. Clean the bulb surface with
alcohol and lens paper if the user has touched the bulb surface accidental-
ly. Any larger watt bulb may cause damage to the unit.
d. Specification of the 10 watt bulb can be found on the surface of the
microscope. Replacement bulbs (Part # T115V10WB) may be purchased
on Ken-A-Vision web site under accessories at www.ken-a-vision.com
CARE AND MAINTENANCE
Your microscope is a fine precision instrument and should be treated
with care. When not in use it should be protected from dust by the plas-
tic cover provided. Lenses and mirror should be cleaned periodically
with optical lens tissue that is soft and lint free. Painted surfaces can be
cleaned with a moistened cloth. Objectives should be cleaned with a cot-
ton swab and Denatured Alcohol.
Ken-A-Vision has quality technicians on staff to repair or service your
microscopes. Ken-A-Vision recommends service every two years for
optimal life of product. Contact us at 1.816.353.4787 for more details.
WARRANTY: TEN YEAR LIMITED WARRANTY AGAINST DEFECTIVE PARTS
AND WORKMANSHIP.
PrepScope
Instruction Manual
T-1200
T-1201
T-1202
T-1201C (see supplemental)
T-1202C (see supplemental)
KEN-A-VISION MANUFACTURING CO., INC.
5615 Raytown Road, Kansas City, MO 64133 U.S.A Tel. 816-353-4787 Fax. 816-358-5072
kav.instcman.prep.pc.v3
Part# INS-SC50
Download from Www.Somanuals.com. All Manuals Search And Download.
|