Jwin Conference Phone JT P551 User Manual

Caller ID Speaker Phone with Emergency  
Remote Control  
Instruction Manual  
JT-P551  
Please read this manual carefully before operating and save it for future reference.  
Have a question? Please visit http://www.jWIN.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
USER SAFETY GUIDE  
Compliance (USA and Canada)  
This product complies with the standards in Part 68 of the FCC Rules in the USA  
and CS-03 in Canada.  
1. This product must be connected to the public switched telephone network  
through a modular telephone outlet or jack.  
2. Upon the request of the local telephone service provider, the user of this product  
must provide the following information:  
The “line” to which this telephone equipment will be connected (telephone  
number)  
The telephone equipment’s FCC registration number and ringer equivalence  
number. This information is printed on the back or bottom of the unit.  
3. If it is determined that this equipment is malfunctioning, the FCC requires that it  
not be used and that it must be unplugged from the modular outlet until the  
problem has been corrected.  
4. If the product causes harm to the telephone network, the telephone company  
may temporarily discontinue telephone service. Whenever possible, the  
telephone company will contact a customer prior to a service interruption. If  
advanced notice is not possible, the customer will be notifies as soon as possible.  
The customer will be given the opportunity to correct the problem.  
Download from Www.Somanuals.c-om2. -All Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
TABLE OF CONTENTS  
Getting Started  
General Features ……………………………………………………………………...  
What’s Included …..…………………………………………………………………...  
Location of Controls ………………………………………………………………..…  
Getting the Telephone Ready for Use ……………………………………………...  
Mounting the Phone on the Wall …………………………………………………….  
Connecting the Stand for Wall Mounting ……………………………….................  
Installing the Batteries ………………………………………………………………..  
Using an AC Adapter (Optional) ……………………………………………………..  
4
4
5
6
7
7
9
9
Operational Instructions  
Description of the Display ……………………………………………………………. 11  
Basic Setup ……………………………………………………………………………. 11  
Receiving Caller ID Information …………...………………………………………... 15  
Emergency Call Function ……………………...…………………………………….. 16  
Receiving a Call using the Pendant Remote ………...….………………………… 18  
Reviewing the Caller ID List …………………………………………………………. 18  
Erasing Data from the Caller ID List ………………………………………………... 18  
Calling a Number from the Caller ID List …………………………………………... 18  
Name Recording ……………………………………………………………………… 19  
Phonebook Search, Delete and Dial Back ...………………………………………. 20  
One-Touch Memory …………………………..……………………………………… 20  
Pre-Dialing Function ……….…………………………………………………………. 20  
Last Number Redial …………………………..……………………………………… 21  
Using the Flash Function …………………………………………………………….. 21  
Troubleshooting and Specifications …………………………………………….. 22  
Download from Www.Somanuals.c-om3. -All Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
GETTING STARTED  
Thank you for purchasing the JT-P551 Caller ID Speaker Phone with emergency  
pendant remote control. Please read and follow the instructions in this manual  
carefully to ensure that your product operates correctly.  
General Features  
Supports both FSK and DTMF systems  
Emergency call (SOS) function with 2.4GHz wireless pendant remote control  
Emergency message recording  
Speaker phone system  
16-digit liquid crystal display (LCD)  
Stores ID information for up to 60 calls  
Digital phonebook for 30 telephone numbers  
2 one-touch speed dial buttons  
Clock and date display  
Redial and flash functions  
Incoming call indication  
Flashing ringer light  
Tone / pulse mode selection  
Ringer / receiver / speaker phone volume controls  
Supports 11 languages: English, French, Spanish, Italian, Portuguese, German,  
Dutch, Swedish, Danish, Polish, Finnish  
3 languages for voice reporting: English, French, Italian  
What’s included  
Caller ID phone  
Wireless pendant remote control  
Instruction manual  
Download from Www.Somanuals.c-om4. -All Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
GETTING STARTED  
Location of Controls  
1
10  
11  
2
3
4
5
12  
6
7
13  
14  
8
9
15  
16  
1. LCD Screen  
9. CID/ESC Button  
2. DEL Button  
3. OK DIAL Button  
4. Handset  
5. SOS Emergency Dial Button  
6. M2 (Memory 2)  
7. M1 (Memory 1)  
8. MENU Button  
10. SEARCH Button  
11. SEARCH Button  
12. ONE CALL Button with light  
13. Receiver Volume Button  
14. Number Keypad  
15. REDIAL/P Button  
16. FLASH Button  
Getting the Telephone Ready for Use  
1. Choose a desired location for the unit (mounted or on a flat, level surface).  
2. Adjust the removable tab located above the speaker on the base of the phone.  
The tab slides for easy removal.  
Download from Www.Somanuals.c-om5. -All Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
GETTING STARTED  
Getting the Telephone Ready for Use- continued  
For wall mounted units, the side of the tab with the lip must be situated toward  
the top of the base to allow the handset to hang on the base without falling.  
The lip fits into the opening under the earpiece on the handset.  
LIP  
NO LIP  
For flat, level placement, the side of the tab with the lip should be situated  
toward the bottom of the base to allow smooth removal of the handset from  
the base.  
3. Plug one end of the coiled telephone cord into the jack on the handset, and the  
other into the matching jack on the left side of the unit’s base.  
4. Plug one end of the flat telephone cord into the jack in the rear of the unit’s base  
(marked TEL-LINE), and the other end into the wall jack which supplies  
telephone service.  
Download from Www.Somanuals.c-om6. -All Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
GETTING STARTED  
Mounting the Phone on the Wall  
1. Choose a desired wall location for the phone.  
Wall mount  
hanger  
2. Align nails or picture hooks with the wall-  
mount hanger located on the bottom  
surface of the base.  
3. Hammer nails or hangers into the wall so  
the phone can hang flush with the wall.  
4. Set the removable receiver tab with lip toward the top of the base.  
5. Hang phone on nails or picture hangers making certain that the phone is flush  
with the wall.  
Connecting the Stand for Flat Surfaces  
When using the JT-P551 on a flat surface, it is recommended that you use the  
included stand.  
1. Remove the stand from the plastic wrapper.  
2. Turn the phone upside down with the battery compartment closest to you.  
3. The stand attaches above where the battery compartment is located.  
4. There are four (4) slots. The top slot is large and located in the center of  
the bottom surface of the unit. The bottom three (3) slots are situated closer  
together and are located near the battery compartment.  
Download from Www.Somanuals.c-om7. -All Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
GETTING STARTED  
Connecting the Stand for Flat Surfaces-continued  
5. Line up the bottom three (3) lips on the stand with the bottom three (3) slots  
on the bottom of the unit and place the lips into the slots.  
6. Using your thumbs, gently press the stand just above the bottom three (3)  
lips until the stand clicks into position.  
Click!  
7. Return the phone to the upright position. The phone is now ready to be  
mounted on the wall.  
Download from Www.Somanuals.c-om8. -All Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
GETTING STARTED  
Installing the Batteries  
The JT-P551 requires four (4) AA batteries, which are used to operate the  
speakerphone, the LCD display, and to retain Caller ID data and any settings  
programmed into the phone. Using an optional AC adapter (see Notes below) will  
increase the battery’s life span, requiring less frequent battery replacement.  
1. Remove the battery compartment cover at the  
bottom of the unit.  
2. Carefully install four (4) AA batteries by observing  
the polarity direction shown in the battery  
compartment.  
3. Replace the cover.  
Notes:  
Whether installing batteries for the first time or replacing them, do not mix old  
and new batteries, nor should alkaline, standard (zinc-carbon), or rechargeable  
(nickel-cadmium) batteries be used together.  
When not using the phone for a long period of time, remove the batteries to  
prevent possible leakage and corrosion. Keeping the phone powered by the  
optional AC adapter, discussed below, will preserve all data and settings in the  
phone’s memory.  
Using an AC Adapter (Optional)  
If an optional AC power adapter (not included) is used, it plugs into the DC 9V jack  
on the rear of the unit and converts common household AC electricity into low  
voltage DC power, suitable for the phone’s operation. Such adapters are commonly  
available, but before buying, be sure that it can provide the necessary +/- polarity, as  
indicated on the unit’s rear panel, just below the DC 9V jack. Once connected, plug  
the adapter’s other end into an un-switched (always on) AC outlet, outlet strip, or  
extension cord. Even when an AC adapter is employed, the use of batteries is  
recommended as a backup in case AC power is ever lost.  
Download from Www.Somanuals.c-om9. -All Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
GETTING STARTED  
Notes:  
If neither the batteries nor an AC adapter are connected, the JT-P551 will still be  
able to place and receive calls, but the speakerphone, the ability to store Caller  
ID data, and the LCD display functions will not operate.  
When batteries are used without an AC adapter, they should be replaced when  
the display dims.  
When replacing the batteries without an AC adapter connected, it’s the best to  
pick up the handset before removing the batteries. Doing so prevents the loss of  
stored Caller ID data and programmed settings while the batteries are being  
replaced. If not done, it’s possible that all settings and data in the phone’s  
memory will be lost.  
If batteries are not installed in the main unit or the batteries are low, the RED  
speaker phone button light will flash. Flashing RED will continue until batteries  
are installed.  
Download from Www.Somanuals.-co1m0. A-ll Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
OPERATIONAL INSTRUCTIONS  
Description of the Display  
The JT-P551 features a three-line LCD. The top line displays basic information; the  
middle line shows the telephone number of the incoming call; and the bottom line  
displays the name of the caller. Also included on the display is helpful information  
such as:  
The word, “NEW” appears on the screen when there are new incoming calls.  
The word, “CALL#” indicates the total number of incoming calls received.  
The word “REPEAT” on the LCD screen means that the incoming call is  
coming in again.  
The word “VOICE” appears to indicate voice reporting.  
“SOS” appears on the screen when an emergency call is dialed.  
Hour: Minute Morning/Afternoon Day/Month are displayed. For example:  
“10:15 AM 21/03” (Year is not displayed)  
If the time and date programmed into the telephone differ from the  
telephone company’s record, the telephone will automatically adjust to the  
service provider’s information when receiving calls.  
When there has been no operation on the telephone for more than 20  
seconds, the LCD will only display the time and date, amount of received  
calls and amount of incoming calls.  
The JT-P551 can store up to 60 incoming calls. Once 60 calls have been  
received, the oldest call will automatically erase when a new call is received.  
Basic Setup  
In order to navigate the following menu items, press the [MENU] button (opens the  
menu). To scroll through menu items, press the [MENU] button repeatedly or the  
SEARCH [] / [] buttons.  
Note: Please be sure the telephone lines are connected well and batteries or AC  
adapter are installed before starting setting.  
1. LCD CONTRAST  
Press [OK/DIAL] to enter the LCD contrast mode when “LCD CONTRAST”  
appears on the screen.  
Press [] or [] to select the desired contrast level (1 to 5).  
Press [OK/DIAL] to confirm.  
Download from Www.Somanuals.-co1m1. A-ll Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
OPERATIONAL INSTRUCTIONS  
Basic Setup-Continued  
2. SET DATE / TIME  
When the LCD displays “ENTER TIME / DATE”, press [OK/DIAL] to enter  
this function.  
When the LCD displays “ENTER TIME”, press [] or [] to set the hour.  
Press [] or [] to set the minute.  
Press [OK/DIAL] to confirm.  
Use the same procedure to set the month and day.  
3. SET LANGUAGE  
When the LCD displays “LANGUAGE”, use [] or [] to select the desired  
language, ENGLISH (English), FRANCAIS (French), ITALIANO (Italian),  
DEUTSCH (German), ESPANOL (Spanish), PORTUGUES (Portuguese).  
NEDERLANDS (Dutch), POLSKI (Polish), SVENSKA (Swedish), DANISH  
(Danish), FINNISH (Finnish).  
Press [OK/DIAL] to confirm your choice.  
4. SET VOICE  
When the LCD displays “VOICE”, press [OK/DIAL] to enter.  
Use [] or [] to select the desired language for voice reporting, (VOICE  
ENGLISH, VOICE FRENCH, VOICE GERMAN, VOICE ITALIAN.  
To disable the voice reporting function, select VOICE NO.  
Press [OK/DIAL] to confirm your choice.  
5. SET FLASH TIME  
When the LCD displays “SET FLASH TIME,” press [OK/DIAL] to enter.  
Press to select flash time from among 100MS, 300MS, or 600MS.  
Press [OK/DIAL] again to confirm.  
6. SET DIAL MODE  
When the LCD displays “SET DIAL MODE,” press [OK/DIAL] to enter this  
menu.  
Press [] or [] to choose TONE (T) or PULSE (P).  
Press [OK/DIAL] to confirm.  
Download from Www.Somanuals.-co1m2. A-ll Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
OPERATIONAL INSTRUCTIONS  
Basic Setup-Continued  
7. SET LOCAL AREA CODE  
When the LCD displays “LOCAL AREA CODE”, press [OK/DIAL] to enter  
this function.  
Press [] or [] to select the first digit of area code.  
Press [OK/DIAL] to confirm the first digit.  
Use the same procedure to set the rest of the digits.  
8. PHONE BOOK ENTRY WITHOUT EMERGENCY NUMBER SETTING  
When the LCD displays “STORE NUMBER”, press [OK/DIAL] to enter.  
Flashing prompt will appear in the middle of the display.  
Use the keypad to enter the desired number.  
Press [OK/DIAL] to confirm.  
A flashing prompt will now appear on the bottom line of the display.  
Use the keypad to enter the name (16 letters max.).  
Press the number key containing the desired letter and press it repeatedly  
until that letter is displayed on the LCD screen. Press the “1” key once for a  
space (repeatedly for a symbol). Press “*” and “# ” keys for additional  
symbols.  
Press the [DEL] button to correct entry.  
Press [OK/DIAL] to confirm followed by the words “EMERGENCY OFF” on  
the display.  
Press [OK/DIAL] to confirm followed by the word “SAVE” on the display and  
an audio announcement: “Name recording.”  
If you wish to not record a voice tag, press the [DEL] button or;  
Press and hold [OK/DIAL] until there is a beep.  
To record a Name Tag for the number entered, press and hold [OK/DIAL]  
during the entire recording process until finished.  
Release [OK/DIAL] to end the recording. There will be an audio signal of  
“STORE,” and the words “STORE NUMBER” will be shown on the display.  
Press the [DEL] button to exit this setting.  
Note: The JT-P551 can store up to 30 records. The words “MEMORY FULL” will  
appear on the LCD screen when the records are full.  
Download from Www.Somanuals.-co1m3. A-ll Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
OPERATIONAL INSTRUCTIONS  
Basic Setup-Continued  
9. PHONE BOOK ENTRY WITH EMERGENCY NUMBER SETTING  
When the LCD displays “STORE NUMBER”, press [OK/DIAL] to enter.  
Flashing prompt will appear in the middle of the display.  
Use the keypad to enter the desired number.  
Press [OK/DIAL] to confirm.  
A flashing prompt will now appear on the bottom line of the display.  
Use the keypad to enter the name (16 letters max.).  
Press the number key containing the desired letter and press it repeatedly  
until that letter is displayed on the LCD screen.  
Press the [DEL] button to correct entry.  
Press [OK/DIAL] to confirm followed by the words “EMERGENCY OFF” on  
the display.  
Press [] and the display will show “EMERGENCY ON”  
Press [OK/DIAL] and the phone will display “XX LOCATION”  
Press [] or [] to edit the position of the entered number in the emergency list  
and press [OK/DIAL] to confirm (If a number is already set for the decided  
location, “XX overwrite” will display), “SAVED!” will then be shown and the  
phone will announce “NAME RECORDING”  
If you wish to not record a voice tag, press the [DEL] button or;  
Press and hold [OK/DIAL] until there is a beep.  
To record a Name Tag for the number entered, press and hold [OK/DIAL]  
during the entire recording process until finished.  
Release [OK/DIAL] to end the recording. There will be an audio signal of  
“Store,” and the words “STORE NUMBER” will be shown on the display.  
Press the [DEL] button to exit this setting.  
10. COPY FROM THE CALLER ID TO THE PHONE BOOK  
You can copy Caller ID information to the phone book while you are reviewing  
the Caller ID information.  
Select the required Caller ID memory location by scrolling [] or []  
buttons.  
Press and hold [MENU] button for two (2) seconds, the LCD will display the  
words, “COPY TO MEMORY?”  
Press [OK/DIAL] button, the LCD will display the word “SAVE.”  
Download from Www.Somanuals.-co1m4. A-ll Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
OPERATIONAL INSTRUCTIONS  
Basic Setup-Continued  
11. REMOTE SETTING  
Press [MENU] to enter this mode.  
Press [] until “PAIR NEW PENDANT” is shown on the LCD screen.  
Press [OK/DIAL] twice.  
The word, “PAIRING” will flash on LCD screen.  
Press the SOS button on the pendant and the word “DONE” will display on  
the LCD screen.  
Press [DEL] to exit the setting  
12. RINGER VOLUME  
Slide the [RINGER] switch to ‘HI’ position for high ringer volume, ‘MI’  
position for medium ringer volume and ‘LO’ for low ringer volume.  
13. HANDSET VOLUME CONTROL  
Slide the [RECEIVER] switch from the handset to adjust the handset  
volume. ‘NOR’ position for normal handset volume, ‘HI’ position for high  
handset volume and ‘VHI’ for very high handset volume  
14. SPEAKER PHONE VOLUME CONTROL (MIN. to MAX.)  
Slide the [SPEAKER] switch from the left side of the base unit to adjust the  
speakerphone volume from minimum (Min.) to maximum (Max.).  
Receiving Caller ID Information  
Your telephone service provider must offer caller ID service in order to activate the  
caller ID function on this unit.  
1. Incoming Call Display.  
When there is an incoming call, the LCD will display the number, area code,  
name, time and date of the call.  
2. Make note of the following indicators.  
“UNAVAILABLE”: The call is made through a telephone company that does  
not offer caller ID service or does not transfer such information long  
distance.  
“BLOCKED CALL”: Some areas allow callers the option of preventing their  
telephone data from display on other telephones.  
MESSAGE ICON: This will appear if you have a message service through  
your telephone service provider and someone has left a message.  
Download from Www.Somanuals.-co1m5. A-ll Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
OPERATIONAL INSTRUCTIONS  
Emergency Call Function  
1. EMERGENCY MESSAGE  
It is important you record the personalized message with all the important  
information as below (part B).  
A. This unit includes a back-up pre-recorded message. “THIS IS AN  
EMERGENCY CALL, TO ACCEPT THIS CALL PRESS ZERO.”  
B. Your own message must be recorded to properly use the Emergency Help  
System (max. recording time is 20 seconds). The message should always  
end with “please immediately hang up if you cannot get me help now. To  
accept this call press zero”.  
Example: There is a medical emergency at the home of John Smith at 123  
Main Street, Apt. 4D, please come at once. Please immediately hang up if you  
cannot get me help now. To accept this call press zero.  
2. RECORDING AN EMERGENCY MESSAGE  
A. Press and release the [MENU] button until the “RECORD MESSAGE” is  
shown in the LCD display.  
B. Press and hold the [OK/DIAL]. Start your message directly after you hear  
the “BEEP” tone and “VOICE” icon is flashing. While recording, keep at a  
distance of 15cm from the telephone so that you speak easily into the  
microphone on the upper side.  
C. Release [OK/DIAL] after you have finished your emergency message. The  
message will now be played back automatically.  
3. CHECKING THE EMERGENCY MESSAGE  
You can check the emergency message at any time.  
A. Press and release the [MENU] button until the words “CHECK MESSAGE”  
appear on the LCD screen.  
B. The press [OK/DIAL] to play back the message.  
4. DELETING EMERGENCY MESSAGE (REVERT TO PRE-RECORDED  
MESSAGE)  
If you have recorded your own message, you can delete this and by doing so  
revert to the pre-recording message. Note: As stated above, it is important to  
record a personalized message.  
A. Press and release the [MENU] button until the words “CHECK MESSAGE”  
appear on the LCD screen.  
Download from Www.Somanuals.-co1m6. A-ll Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
OPERATIONAL INSTRUCTIONS  
Emergency Call Function-Continued  
B. Then press the [OK/DIAL] to play back the message.  
C. During the playback, press [DEL] button. Your own message will be deleted  
and you will be using the pre-recorded greeting.  
5. ACTIVATING THE EMERGENCY HELP SYSTEM  
A. Press and hold the [SOS] button on the telephone for 3 seconds, then the  
telephone local alarm will sound for 15 seconds. The telephone will then  
dial out the entered emergency help system numbers automatically in  
speakerphone mode. or;  
B. Using the wireless pendant also can activate the Emergency Help System.  
Press and hold down the button on the pendant remote for more than 1  
second. The pendant will flash for approximately 15 seconds, the telephone  
local alarm sounds for 15 seconds as well.  
C. Within these 15 seconds, press [SOS] button or press button on the  
pendant remote once more to turn off the Emergency Help System.  
D. The telephone dials out the first of the entered emergency numbers (stored  
in the phone book emergency location 1) in speakerphone mode, and then  
begins playing the emergency message.  
E. The emergency message will be played repetitively for 1 minute until the  
called party can acknowledge the call by pressing 0 the telephone will be  
put in speakerphone operation for 3 minutes.  
Note: If 0 is not pressed during the period the message is played, the next  
emergency number in the sequence will be dialed out automatically in  
speakerphone mode.  
F. During 3 minutes speakerphone operation, press [SPEAKER] button or red  
button of the pendant to terminate the conversation and the Emergency  
Help System will be turned off or:  
G. During 3 minutes speakerphone operation, if the called party presses ‘1’  
and then presses ‘5’ the Emergency Help System will be turned off and the  
conversation will be terminated only after one of the parties hung up.  
Note: When the time reaches to 2 minutes 50 seconds, you will hear a signal to  
indicate that 10 seconds left to 3 minutes.  
Download from Www.Somanuals.-co1m7. A-ll Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
OPERATIONAL INSTRUCTIONS  
Receiving a call Using the Pendant Remote  
Telephone will ring to alert the user of an incoming call.  
1. When there is an incoming call, pick up the handset or press [SPEAKER]  
to receive the call.  
2. You may also use pendant remote to pick up the call. When there is an  
incoming call, just press the button of the pendant remote and the  
telephone will be put in speakerphone operation.  
3. After finishing the conversation, press and hold the button of the pendant  
remote again for a few seconds to terminate the call and the telephone will  
be returned to on-hook state.  
Reviewing the Caller ID List  
Press [] or [] to review incoming calls (up to 60 calls).  
Erasing Data from the Caller ID List  
1. Press [] or [] to find the number you wish to erase.  
2. Press [DEL] to erase the number from the list.  
3. Press [DEL] for approximately 3 seconds for the LCD to show “ERASE  
ALL?”  
4. Press [DEL] again to erase the entire caller ID list.  
Calling a Number from the Caller ID List  
In on-hook state:  
1. Press [] or [] to select the desired caller ID record.  
2. If the record is less than 10 digits, press [OK/DIAL] once, pick up the  
handset and the displaying number will be dialed out automatically.  
3. If the record is 10 digits and the first 3 digits of the record is the same as set  
area code, press [OK/DIAL], the three digits area code will be erased and it  
will display 7 digits number only. The LCD will display “PICK UP OR ADJ”.  
Press [OK/DIAL] again to return back to 10 digits with adding area code.  
Press [OK/DIAL] once again to show 11 digits with adding ‘1’ as the first  
digits and area code as well. Pick up the phone and the number will be  
dialed out automatically.  
Download from Www.Somanuals.-co1m8. A-ll Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
OPERATIONAL INSTRUCTIONS  
Calling a Number from the Caller ID List-Continued  
4. If the record is 10 digits but the first 3 digits of the record is different from  
the set area code, press [OK/DIAL] once to show 11 digits with adding ‘1’  
as the first digits. Press [OK/DIAL] again to return back to 10 digits. Press  
[OK/DIAL] once again to show 7 digits and first three digits will be erased.  
Pick up the phone and the number will be dialed out automatically.  
In off-hook state:  
1. Press [] or [] to select the desire caller id record.  
2. If the record is less than 10 digits, press [OK/DIAL] once and the displaying  
number will be dialed out automatically after 2 seconds.  
3. If the record is 10 digits and the first 3 digits of the record is the same as set  
area code, press [OK/DIAL], the three digits area code will be erased and it  
will display 7 digits number only. Press [OK/DIAL] again to return back to  
10 digits with adding area code. Press [OK/DIAL] once again to show 11  
digits with adding ‘1’ as the first digits and area code as well. The number  
will be dialed out after 2 seconds automatically.  
4. If the record is 10 digits but the first 3 digits of the record is different from  
the set area code, press [OK/DIAL] once to show 11 digits with adding ‘1’  
as the first digits. Press [OK/DIAL] again to return back to 10 digits. Press  
[OK/DIAL] once again to show 7 digits and first three digits will be erased.  
Pick up the phone and the number will be dialed out automatically. (Please  
refer to the table as below for reference)  
Name Recording  
1. Press [] or [] to find the party for which you want to record a voice  
name (recorded voice will sound for the party when selected from the  
phone book) and press [OK].  
2. To record, press and hold [OK/DIAL] and begin recording after the beep  
(Hold [OK] while recording). Recorded voice name will automatically play  
one time.  
3. To re-record, press and hold [OK] and record again.  
4. Press [] or [] to find the next party for voice recording and repeat from  
step 1.  
Download from Www.Somanuals.-co1m9. A-ll Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
OPERATIONAL INSTRUCTIONS  
Phonebook Search, Delete and Dial Back  
1. In the on-hook state, press [] and [] to check incoming call records,  
press [CID/ESC] to enter phone book record.  
2. Use [] or [] to search the desire record or press the first letter of record  
name to search the desired record directly.  
3. Press [OK/DIAL] to dial back the displaying record.  
4. Press [DEL] once, the LCD will display “DELETE?” Then press [DEL] for 2  
seconds to delete the showing record.  
5. If you want to delete all phonebook records, press and hold [DEL] key until  
the LCD display “DELETE ALL?”, then press [DEL] for 2 seconds to delete  
all records.  
Note: To switch between phone book and caller ID, press [CID/ESC].  
One-Touch Memory  
1. In the on-hook or off-hook state, press [MENU] button until the LCD  
displays “STORE NUMBER.”  
2. Press [OK/DIAL] button, then enter the wanted number by using keypad.  
3. Press [OK/DIAL] to confirm.  
4. Choose the desired location M1 or M2.  
5. Press [OK/DIAL] to confirm and the LCD will display “SAVE.”  
To dial from one-touch memory keys, lift handset or press the speaker and press the  
key (M1/M2) and the number in the memory will be dialed out automatically.  
Pre-Dialing Feature  
1. Under on-hook state, enter the wanted telephone number.  
2. Lift the handset or press [SPEAKER] and the number will be dialed out  
automatically.  
Note: You may use [DEL] key to modify or erase the number during entering the  
wanted telephone number.  
Download from Www.Somanuals.-co2m0. A-ll Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
OPERATIONAL INSTRUCTIONS  
Last Number Redial  
The last outgoing number can be redialed automatically just by pressing the  
[REDIAL/P] key under off-hook state. This is useful especially if the line is busy.  
Flash Function  
1. When in an office equipped with PABX, this telephone makes it easy to  
transfer calls. Ask caller to wait and press [FLASH] key once.  
2. Dial the extension number which caller intended.  
3. When the party answers, just hang up the handset.  
4. When the line is busy or nobody answers, press [FLASH] key again to re-  
connect with the caller.  
Important note: To operate this phone, you must have Caller ID Service set up  
through your local telephone company. Some functions will only operate if such  
service is included in the user’s Caller ID program through the local telephone  
company.  
Download from Www.Somanuals.-co2m1. A-ll Manuals Search And Download.  
Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008  
TROUBLESHOOTING & SPECIFICATIONS  
Troubleshooting  
No Display on LCD Screen  
o
Brightness on display may be turned down.  
ƒ Increase brightness level.  
o
No batteries or batteries are improperly installed.  
ƒ If no batteries, install 2 AA batteries as directed or  
ƒ Install optional AC Adapter (not included).  
ƒ Make sure batteries observe to polarities (+/-) as indicated inside the  
battery compartment.  
No Dial Tone when handset is picked up  
o
Phone may not be connected properly.  
ƒ Make sure the handset jack is connected to the base jack using the  
colied wire.  
ƒ Make sure the base jack (TEL-LINE) jack is connected to the wall  
telephone jack using the flat wire.  
o
Telephone service may be interrupted by the telephone company  
ƒ Contact your telephone company to check the status of your service.  
Static or interruptions during phone conversation  
o
Bad connection between phones  
ƒ Hang up and dial number again.  
o
Harsh weather conditions and/or lightning  
ƒ Hang up and dial number when weather conditions improve.  
Can only receive incoming calls and cannot make outgoing calls  
o
Telephone service may be limited or suspended by your telephone company  
ƒ Contact your telephone company to check the status of your service.  
Important Note:  
To operate this unit, you must have “CALLER ID SERVICE” setup with your local  
telephone company. Some functions such as CALLER NAME INDICATION will only  
operate if such service is included in the user’s Caller I.D. program with the local  
telephone company.  
Specifications  
Power Requirement  
o
o
Battery: 6V (4 x “AA” batteries, not included)  
AC Adapter: DC 9V, 300mA, center negative (AC adapter not included)  
Unit Weight: Approx. 1.4 lbs (0.640kg)  
Download from Www.Somanuals.-co2m2. A-ll Manuals Search And Download.  
TEL: 516-626-7188  
FAX: 516-626-7105  
© 2007 jWIN Electronics Corp. All rights reserved. No portion of this printed material or product  
enclosed herewith including design, shape and graphics, may be reproduced or transmitted in  
any form without the expressed written consent of jWIN Electronics Corp. by any means,  
electronic or mechanical, including photocopying, recording, or by use of an information storage  
and retrieval system. Any unauthorized distribution or reproduction of this printed material or  
product, or any portion thereof, will be prosecuted to the fullest possible extent of the law.  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer Dryer SIXL 125 S User Manual
Jensen MP3 Docking Station JiMS 198i User Manual
Jet Tools Automobile Parts JSJ 10T User Manual
Johnson Controls Network Router AS CVTPROx00 1 User Manual
JVC Furnace HR J245EA User Manual
Jwin Clock JL CD808 User Manual
Kenwood Stereo Receiver KR V888D User Manual
KitchenAid Food Warmer KEWS145SPA01 User Manual
Kodak Printer VX5000 User Manual
Korg Turntable The iS40 User Manual