JLBIWD 1400
Built-in 1400 spin washer-dryer
Instruction manual
Programme time
On/Off
1400
900
Extra dry
Store dry
Iron dry
Prewash
Wash
30 Minute wash
Spin
90°
Economy 60°
60°
Off
700
Rinse
Drain
Softeners
Rinse
500
Rinse hold
Drain
Economy 40°
40°
Rinse hold
Extra Automatic Time
rinse
Delay
start
Start/
Pause
Spin
30°
Drying
Spin Prewash Quick
dry
dry
Soak 30°
Cold
Drying
End
60°
30°
Economy 40°
40°
40°
Delicates 30°
Delicates 40°
Easy iron 40°
Drying
JLBIWD1400
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Select the desired programme/temperature
Select the spin speed or the “Rinse hold” option
Select the desired options
Select the “Delay start”
Start the programme
How to change an option or a programme
during its cycle
How to interrupt a programme
How to open the door during
the cycle of a programme
End of programme
Drying 2.5 kg of cotton
20
20
20
20
20
Important Safety Information
Your New Washer-Dryer
2
4
5
5
5
Description of the Appliance
Detergent dispenser drawer
Child safety feature
20
21
For the Installer
Installation Instructions
Technical Specifications
Unpacking
Positioning
6
6
7
7
21
21
22
Autodrying 1.5 kg of synthetics
22-23
Installation on a suspended floor
Building-in
Water inlet
Water drainage
Levelling
Special conditions
In the interest of the environment
Electrical connection
Permanent connection
7
8-10
10
11
12
12
12
12-13
13
Washing and Drying
Wash Care Symbols
Washing Programmes
Drying Programmes
Maintenance and Cleaning
Descaling
24
24
26-27
28
29-30
29
After each wash
Maintenance Wash
29
29
External cleaning
29
29
29
For the User
The Control Panel
Programme information
Operating Sequence
Load the laundry
Measure out the detergent
Measure out the fabric softener
Switch the machine on
Cleaning the dispenser drawer
Cleaning the drawer recess
Cleaning the filter
Cleaning the water inlet filter
The dangers of freezing
Emergency emptying out
14-17
18
19-21
19
29-30
30
30
30
19
19
19
Something Not Working
Service and Spare Parts
31-32
33
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
Hints and tips
Environmental information
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Your New Washer-Dryer
Your new washer-dryer, which is fitted with the Jet System, meets all modern requirements for
effective treatment of laundry with low water, energy and detergent consumption.
Even small loads are washed “economically” because the amount of water used is regulated
automatically according to the load and type of fabric.
●
The programme progress display shows the programme steps selected, the programme phase which is
running and the end of the programme.
●
The programme selector dial combines the function of programme and temperature selection, making it
easier to set the programme.
●
Automatic cooling of the wash water to 60°C before draining, with the 90°C programme. This reduces
thermal shock to fabrics, helping to prevent creasing.
●
The special wool programme with its new delicate wash system treats your woollens with extreme care.
●
The balance control device ensures that the washer-dryer remains stable when spinning.
●
The two drying programmes will give your wash that soft, relaxed feel whatever the weather.
Ecological hints
Environmental Information
To save water and energy and help protect the
environment, we recommend that you follow these
hints:
●
●
Materials marked with the symbol
recyclable.
are
Check with your local Council or Environmental
Health Office to see if there are facilities in your
area for re-cycling this appliance.
●
Normally soiled laundry may be washed without
prewashing in order to save detergent, water and
time (the environment is protected too!).
●
●
When the appliance is to be scrapped, cut off the
power supply cable and make the door lock device
unusable to prevent young children from being
trapped inside.
●
The machine works more economically if it is fully
loaded.
●
With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature.
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
●
Measure out detergent according to the water
The symbol
on the product or on its packaging
hardness, the degree of soiling and the quantity of
laundry being washed.
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local city office, your
household waste disposal service or the shop where
you purchased the product.
●
Try to load the maximum drying capacity of the
machine as small loads are uneconomical.
●
Save energy and reduce drying time by ensuring the
laundry load has been thoroughly spun before
attempting to machine dry.
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute
the wash load manually and select a spin programme. For more detailed information see the section headed
“Something Not Working” (See pages 31 to 32).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the Appliance
1 Detergent dispenser drawer
2 Control panel
Programme time
3 Door opening handle
On/Off
1400
900
Extra dry
Store dry
Iron dry
Prewash
Wash
30 Minute wash
Spin
90°
Economy 60°
60°
Off
700
Rinse
Drain
Softeners
Rinse
500
Rinse hold
Drain
Economy 40°
40°
Rinse hold
Extra Automatic Time
Delay
start
Start/
Pause
Spin
Spin Prewash Quick
rinse
dry
dry
Soak 30°
Cold
30°
Drying
Drying
End
30°
60°
40°
Economy 40°
40°
4 Filter
Delicates 30°
Delicates 40°
Easy iron 40°
Drying
JLBIWD1400
5 Adjustable feet
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
C0110
Child safety feature
This machine incorporates a special child safety feature
to prevent small children from being trapped inside the
machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the groove is
horizontal. If necessary use a coin.
To disable this device and restore the possibility of
closing the door, rotate the button anti-clockwise until
the groove is vertical.
P1131
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Technical Specifications
DIMENSIONS
Height
Width
Depth
82 cm
60 cm
54 cm
POWER SUPPLY VOLTAGE
TOTAL POWER ABSORBED
230-240 V/50 Hz
2050 W (10 A)
WATER PRESSURE
Minimum
Maximum
0.05 MPa (0.5 bar)
0.80 MPa (8. bar)
Washing
MAXIMUM RECOMMENDED LOAD
Cotton, linen
Synthetics
Delicate fabrics
Wool/Hand wash
Drying
5.kg
2 kg
2.kg
1 kg
Cotton, linen
Synthetics
2.5.kg
1.5.kg
SPIN SPEED
MaximumZ 16 S
1400 rpm
CONSUMPTION DATA FOR WASHING
5 KG NORMALLY SOILED COTTON
ITEMS WITH PROGRAMME ”
Energy
Water
0.85 kWh
49 litres
“Cottons Economy 60°” (White Cottons):
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking
Set the machine upright and remove the two remaining
bolts from the back.
Pull out the three plastic spacers from the holes into
which the bolts were fitted.
Plug the open holes with the plugs supplied with the
instruction booklet.
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
Using a spanner unscrew and remove the rear right
bolt.
Lay the machine gently on its back, making sure that the
hoses are not squashed.
P0020
P0256
Positioning
P0255
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is
not impeded by carpets, rugs etc. Check that the
machine does not touch the wall or other kitchen
units.
Remove the polystyrene base and take off the bottom
panel by unscrewing the central screw.
Carefully slide out the right polythene bag.
Never place cardboard, wood or similar materials
under the machine to compensate for any unevenness
in the floor.
Your new washer-dryer has been designed to be
permanently plumbed in to your home’s water supply
and drainage system. However, if this is not possible, it
may be connected to a suitable existing tap with the
drain hose discharging into a sink.
P0457
P0015
The appliance has an inlet hose, with female 3/4” BSP
thread connector. If this connection is not compatible
with the plumbing of the existing installation, a variety
of connectors are available from good hardware stores
and plumbers merchants to suit most domestic
plumbing. Any alteration to your existing plumbing
must be carried out by a competent person, or
qualified plumber.
Repeat the operation for the left and central polythene
bags.
Re-fit the bottom panel using the 4 screws supplied
with the door hinges (in the plastic bag) and the
previously removed screw.
Installation on a Suspended
Floor
Suspended wooden floors are particularly susceptible
to vibration. To help prevent vibration we recommend
you place a waterproof wood panel, at least 15 mm
thick under the appliance, secured to at least 2 floor
beams with screws. If possible install the appliance in
one of the corners of the room, where the floor is
more stable.
P0453
P0016
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Building-in
6
4
This appliance has been designed to be built into the
kitchen furniture. The recess should have the
dimensions shown in picture A.
1
7
5
600
600
3
min.
596
570
2
B
P0982
541
8
a) Door
The dimensions of the door should be:
- width 595-598 mm
- thickness 16-22 mm
90
490
A
P0965
The height (C-Fig. C) depends on the height of the
adjacent furniture's base.
When installing the appliance into the kitchen furniture
ensure, if possible, the hoses are placed in either of the
two recesses on the back of the appliance. This will
help to prevent the hoses from becoming kinked or
trapped. Fig. AB.
35 Ø 12.5-14 depth
16-22
22+1,5
595-598
C
P0422S
b) Hinges
To mount the hinges it is necessary to drill two holes
(dia. 35 mm, depth 12.5-14 mm depending on the
depth of door furniture) on the inner side of the door.
The distance between the holes hobs fixing centres
must be 416 mm.
The distance (B) from upper edge of the door to the
centre of the hole depends on the adjacent furniture's
dimensions.
Preparation and assembly of
the door
The machine is originally pre-arranged for the assembly
of a door opening from right to left.
The required dimensions are given in the picture C.
The hinges will be fixed to the door by means of
screws for wood (2-Fig. B) supplied with the appliance.
In this case it is sufficient to screw in the hinges (1) and
the counter-magnet (6) provided with the appliance, at
the right level (Fig. B).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
c) Mounting the door
Recommendations regarding
the construction and fitting of
a base when the installation
requires an integrated
Fix the hinges (1) to the machine by means of the
M5x15 screws (3-Fig. B). The hinges can be adjusted to
compensate for possible uneven thickness of the door.
To align the door perfectly it is necessary to loosen the
screw (3-Fig. B), adjust the door and tighten the screw
again.
appliance to be raised
Where the appliance has been raised by mounting onto
a wooden base provided by the installer. The material
used to construct the base should have a non slip
surface, be water repellent and if possible be one solid
piece.
If it is not possible to use one solid piece, due to the
additional height required, ensure that any additional
strips of timber are glued and screwed to the underside
of the base (see Fig. F).
d) Counter-magnet (6)
The appliance is pre-arranged for a magnetic closure of
the door. To enable a correct operation of this device,
it is necessary to screw the counter-magnet (6) (steel
disk + rubber ring) into the inner side of the door.
Its position must correspond to the magnet (4) on the
appliance (See fig. D).
5 mm Hardwood strip
Additional pieces of
timber should run
from front to back
40 mm
6
4
100 mm
600-605 mm
Front view
F
D
P0984
If the door has to be opened from left to right, invert
the position of the plates (7), the magnet (4) and the
plate (5) (Fig. B and E). Mount the countermagnet (6)
and the hinges (1) as previously described.
Drill four fixing holes see Fig. G
600-605 mm
E
6
490 mm
4
95 mm
1
5
7
Front edge
50 mm
Top view
3
G
2
P0983
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Position the base into the recess with its front edge as
far forward as the adjoining plinth line will allow.
Water inlet
Connect the hose to a tap with a 3/4” thread.
Always use the hose supplied with the appliance to
connect to the water supply.
Do not use previously used hoses for water
connection.
The reason for placing the base in this position
is to allow a small strip of beading to be fitted in
front of the appliance feet.
Fix the base firmly to the floor using four appropriate
countersunk screws (see Fig. H).
The inlet hose is provided with a water stop device,
which protects against damage caused by water leaks in
the hose which could develop due to natural ageing of
the hose. This fault is shown by a red sector in the
window “A”. Should this occur, turn the water tap off
and refer to your Service Centre to replace the hose.
Hardwood strip
5 X 25 X 605
5 mm x 25 mm
490
600-605
A
H
P0352
Installation should comply with local water authority
and building regulations’ requirements.
With the appliance installed adjust all four feet ensuring
the machine is stable, and a clearance of approximately
5 mm is left between the top of the machine and the
underside of the worktop.
The appliance must be connected to a cold
water supply.
A minimum water pressure of 0.05 MPa (0.5 bar) is
required for safe operation of the appliance.
A final check for stability should be carried out with the
machine on spin with a load, this will identify the need
for any further fine adjustment to the feet.
If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system.
A strip of beading approximately 605 mm W, x 5 mm
H, x 25 mm D must be screwed down into the base
directly in front of the machine’s feet, this will provide
additional security.
There should be a minimum distance of 5.02m
(16.5 ft) between the appliance’s inlet and the bottom
of the water storage tank.
Set the hose correctly by loosening the ring nut. After
positioning the inlet hose, be sure to tighten the ring
nut again to prevent leaks.
If required an additional door magnet, part number
1242394-00/3 and disc, part number 1242393-00/5 are
available from spare parts.
P0021
10
Download from Www.Somanuals.com. All Manuals Search And Download.
If your drain hose looks like this (see below) you do
not require the “U” piece”. Just push the hose firmly
into the standpipe.
Water drainage
This appliance is designed to be permanently plumbed
into your home's drainage system using one of the
following methods.
1. Into a drainage standpipe.
Firstly form a hook in the end of the drain hose using
the “U” piece” supplied.
P1212
2. Onto a sink outlet spigot.
“U” piece
supplied
If the outlet spigot has not been used before, remove
any blanking plug that may be in place.
P1199
Place the drain hose into your standpipe, which should
have an internal diameter of approximately 38mm thus
ensuring there is an air break between the drain hose
and standpipe.
38 mm (11.2”)
standpipe
diameter
P1197
Push the drain hose onto the spigot and secure with a
clip if required, ensure a loop is formed in the drain
hose (see diagram) to prevent waste from the sink
entering the washing machine.
When discharging into a standpipe ensure that the top
of the standpipe is no more than 90cm (35.4'') and no
less than 60cm (23.6'') above floor level.
3 pin
Loop
P1198
Important
Before connecting the machine to new pipework or to
pipework that has not been used for some time, run off
a reasonable amount of water to flush out any debris
that may have collected in the pipes.
P1039
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre.
The joining piece must have an internal diameter of
18 mm.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Levelling
In the interest of the environment
Level the washing machine by raising or lowering the
feet. The feet may be tight to adjust as they incorporate
a self locking nut, but the machine MUST be level and
stable (check diagonally).
Washing machines and dishwashers should be
connected to the FOUL drainage system, the water will
then be taken to a sewage works for treatment before
being discharged safely into a river.
SHOWER
SINK TOILET
BATH
BIDET
P1051
WASHING
MACHINE
DISHWASHER
RAINWATER
'RUN-OFF'
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, noise and
displacement of the machine during operation.
FOUL DRAIN
SURFACE WATER
DRAINS & SEWERS
FOUL SEWERS
SEWAGE
TREATMENT
WORKS
UNTREATED
DISCHARGE
Some vibration is inevitable, especially if mounted on a
wooden floor.
TREATED
DISCHARGE
RIVER
RIVER
P0987
Sprung wooden floors are particularly susceptible to
vibration. For advice, consult a builder. If possible,
always place the machine on a solid floor.
It is essential that these appliances are not connected
to the surface water drainage system as this water is
discharged directly into a river or stream and may
cause pollution.
If you require any further advice please contact your
local water authority.
Special conditions
If the floor is carpeted or covered with crumbly or soft
material, insert a rigid support base under the feet to
prevent noise, vibration or displacement. The base
should protrude a few centimetres beyond the edges of
the machine.
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
Warning
The machine should NOT be placed on deep pile
carpeting.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
Note
The manufacturer declines any liability
should this safety measure not be
observed.
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
The rating plate is located at the top of the rim of the
open door.
Upon completion there must be no cut, or stray
strands of wire present and the cord clamp must be
secure over the outer sheath.
WARNING:
A cut off plug inserted into a 13 amp
socket is a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely. Should the appliance power supply
cable neeed to be replaced, this must be
carried out by our Service Force Centre.
P
r o
M
d
o
.
N
d
.
.
.
.
.
.
.
.
.
.
.
o
. . . . . . . . . . .
.
S
e
r
.
N
o
.
.
.
.
.
.
.
.
.
.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042 BD
The power supply cable must be easily
accessible after installing the appliance.
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS1363/A) fuse
must be used.
Should the plug need to be replaced for any reason,
proceed as described below.
Important
If the mains supply cable is damaged it must be
replaced; contact our warranty administrators on
0870 0107887 who will give you details for your local
Service Force Centre.
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow
Blue
- Earth
- Neutral
- Live
Permanent connection
In the case of permanent connection it is necessary
that you install a double pole switch between the
appliance and the electricity supply (mains), with a
minimum gap of 3mm between the switch contacts and
of a type suitable for the required load in compliance
with the current electrical regulations.
Brown
GREEN & YELLOW
E
L
N
The switch must not break the yellow and green earth
cable at any point.
BROWN
BLUE
CORD CLAMP
P1041
The wire coloured green and yellow must be
connected to the terminal marked with the letter «E»
or by the earth symbol
yellow.
or coloured green and
The wire coloured blue must be connected to the
terminal marked «N» or coloured black.
The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
The Control Panel
Programme time
On/Off
1400
900
Extra dry
Store dry
Iron dry
Prewash
Wash
30 Minute wash
Spin
90°
Economy 60°
60°
Off
700
Rinse
Drain
Softeners
Rinse
500
Rinse hold
Drain
Economy 40°
40°
Rinse hold
Extra Automatic Time
rinse dry dry
Delay
start
Start/
Pause
Spin
30°
Drying
Spin Prewash Quick
Soak 30°
Cold
Drying
End
60°
30°
Economy 40°
40°
40°
Delicates 30°
Delicates 40°
Easy iron 40°
Drying
JLBIWD1400
11
5 6 7 8 9
10
4
3
12
1
2
To empty out water there are 2 possibilities:
1 Detergent dispenser drawer
2 Mains-on light
• Select programme “Drain” and then depress the
“Start/Pause” button:
The water is emptied out without spinning.
This light comes on when the “On/Off” button is
• Select the Spin programme : reduce the spin speed
by means of the relevant button and then depress
the “Start/Pause” button.
pressed, and goes out when it is pressed again.
The water is emptied out and the laundry is spun at
the selected spin speed.
3 “On/Off” button
Press this button to switch the machine on. Press it
again to switch the machine off.
Important !
Before selecting the “Drain” or “Spin” programmes, the
selector dial must be positioned on Off (cancelling).
4 “Spin” button
The “Rinse hold” option CANNOT be selected for
the automatic Washing & Drying programme.
Press this button repeatedly to change the spin speed,
if you want your laundry to be spun at a speed
different from the one proposed by the washer-dryer
or to select position “Rinse hold”. The relevant light
will light up.
5 “Option” buttons
Depending on the programme, different functions can
be combined. These must be selected after choosing
the desired programme and before depressing the
“Start/Pause” button.
Spin speed
The following speeds are available for the different
fabrics:
When these buttons are pressed, the corresponding
pilot lights illuminate. When they are pressed again, the
pilot lights go out.
If an incorrect option is selected, the pilot lights flash
for about 2 seconds, an acoustic signal is heard and the
message Err is displayed.
• Cottons, linen:
500/700/900 max 1400 r.p.m.;
• Synthetics and wool:
500/700 max 900 r.p.m.;
• Delicates and “30 Minute wash”: 700 r.p.m.
“Rinse Hold” position
Press these buttons to select the following options:
When RINSE HOLD option is selected, the last rinse
water is not emptied out, to prevent the fabrics from
creasing. When the programme has finished, the light
of the “Start/Pause” button goes out, the light of the
“Rinse hold” position and the “End” pilot light are
alight to indicate that the water must be emptied out.
The door is locked.
• “Prewash”: select this option if you wish your
laundry to be prewashed at 30°C max. before the
main wash (not available for Wool and “30
Minute wash”).
The prewash cycle ends with a short spin at 650 rpm
in programmes for cotton and synthetic fabrics,
whereas in the programme for delicate fabrics the
water is only drained. This option can be selected for
heavily soiled laundry.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
If you have already pressed the “Start/Pause” button,
and you wish to cancel the delay time, proceed as
follows:
• “Quick”: select this option for laundry that is only
slightly soiled in order to obtain a good wash result in
a short time.
This option is not available with the Wool
programmes, the Energy saving programmes
“Economy” and “30 Minute wash”.
The washing time will be reduced according to the
type of fabric and the selected temperature.
• set the machine to PAUSE by pressing the
“Start/Pause” button;
0’
• press the “Delay start” button until the symbol “ ”
is displayed.
• press the “Start/Pause” button again.
• “Extra rinse”: this option can be selected with all
programmes, except the Wool programmes and “30
Minute wash”. The machine add 2 rinses for cotton
and 1 rinse for synthetics and delicates.
Important!
• The “Delay start” cannot be used with “Drain” or
“Spin” programmes.
This option is recommended for people who are
allergic to detergents, and areas where the water is
very soft.
Note!
• With programme “Soak 30°” the selected delay (up
to a maximum of 10 hours) corresponds to the
soak time of the laundry in the drum.
6 “Automatic Dry” button
This button allows you to choose the required degree
of drying for cottons and synthetics:
• The door will be locked throughout the delay time.
If you need to open the door, you must first set the
washer-dryer to Pause by pressing the “Start/Pause”
button. After you have closed the door, press the
“Start/Pause” button again.
- Extra dry (only for cottons)
- Store dry (cottons and synthetics)
- Iron dry (only for cottons)
The drying time is automatically adjusted by the
machine: the laundry will be dried to the selected
degree of dryness.
9 “Start/Pause” button
This button has two functions:
• Start: after you have selected the desired programme
and options, press this button to start the washer-
dryer. The light above the button will stop flashing
and remain lit.
If you have selected a delay time, the countdown will
begin and will be shown on the display.
7 “ Time dry” button
If you wish to carry out a timed programme instead of
an electronic programme push the button until the
drying time you want appears in the display according
to the fabrics (cotton or synthetics) you have to dry.
For Cottons and Synthetics you can select a drying
• Pause: when you press this button again, the
programme in progress is interrupted. The light above
the button will start flashing. To restart the
programme from the point at which it was
interrupted, press the button again.
time from 10 minutes to 130 minutes.
8 “Delay start” button
This button makes it possible to delay the starting of
the programme 30 min - 60 min - 90 min, 2 hours and
then by 1 hour up to a maximum of 23 hours.
The delay you have selected is shown on the display for
about 3 seconds; afterwards, the duration of the
programme reappears.
Important!
You must set the washer-dryer to Pause before you
make any change in the programme in progress.
You must select this option after you have set the
programme and before you press the “Start/Pause”
button.
10 Display (Programme time)
The following pieces of information are shown on the
display:
The time value shown on the display will decrease by
one unit every hour.
• Reset/cancellation of the programme
If the programme selector dial is turned to “Off”
position, three blinking dashes are displayed.
Now you can select a new programme.
You can change the delay time at any moment,
before you press the “Start/Pause” button.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
(If, at the end of a washing cycle, the programme
selector dial has not been turned to “Off” position ,
when you press the “On/Off” button to switch the
machine on for the next washing, the display will show
a blinking zero.)
After starting the programme, the remaining time is
updated every minute.
Important!
If you select a drying time longer then 55’ minutes,
after 3 seconds, the display will show it in hours and
minutes (see the example below).
Example:
100
1.00
55
---
Time
dry
Time
dry
• Duration of washing programme in hours and
minutes, after you have selected a programme (for
example 2.05).
• The washer-dryer has stopped with water in
the tub, when the “Rinse hold” option has been
selected or at the end of the “Soak 30°”: this is
indicated by a flashing zero.
• The washer-dryer has completed the
programme: this is indicated by a flashing zero.
2.05
The duration is calculated automatically on the basis
of the maximum recommended load for each type of
fabric.
0
While the programme is running (after you have
pressed the Start/Pause button), the displayed time
value decreases by one unit every minute.
• Delay start, a time value indicated in hours (23
hours max) and selected by means of the relevant
button.
1.25
Delay
start
• Selection of drying time in minutes.
The delay time is displayed for 3 seconds, then the
duration of the selected programme reappears.
After you have pressed the Start/Pause button, the
countdown is updated every hour, and, for the last
two hours, every 30 minutes.
105
16
Download from Www.Somanuals.com. All Manuals Search And Download.
• An incorrect option selection has been made:
this is indicated by the message Err when a function
incompatible with the current programme is selected.
Important!
If you turn the programme selector dial to another
programme when the machine is working, all the lights
of the programme progress display will flash for about 2
seconds but the machine will not perform the new
selected programme.
12 Programme selector dial
The programme selector dial is divided into the
following sections:
• Cottons,
• Synthetics,
• Delicates
• An alarm code indicates a fault in the machine
operation (see page 31, "Something Not Working").
• Wool Hand washing
/
• Special programmes from “Soak 30°” to
“30 Minute wash”
• Reset programme “Off”
E20
30 Minute wash
Spin
90°
Economy 60°
60°
Off
Drain
Softeners
Rinse
Economy 40°
40°
30°
Drying
Soak 30°
Cold
60°
30°
Economy 40°
40°
40°
11 Programme phase indicator
lights
When you select a programme, the lights relevant to
the phases that form the programme light up.
Delicates 30°
Delicates 40°
Easy iron 40°
Drying
The selector dial can be turned either clockwise or
anticlockwise to select the required wash and drying
programme .
“Economy” position corresponds to an ENERGY
SAVING programme and “Cold” to a cold wash.
After you have started the programme, only the light
relevant to the phase that is currently being carried out
will remain lit.
When the washing or drying programme has finished,
the “End” light comes on and a flashing zero appears
on the display. The light of the ‘Start/Pause is off.
Before setting the dial to any position ensure that the
machine is turned to the “Off” position.
Important!
Prewash
Wash
At the end of the programme the selector dial
must be turned to position “Off”.
Rinse
Rinse hold
Drain
Spin
Drying
End
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme information
Important!
Easy iron 40°
The spin speed will automatically assume the setting for
cotton items. If required, reduce the speed to the
desired level by depressing the "Spin" button.
With this programme at 40°C it is possible to wash
synthetic garments which must be ironed. The laundry
is gently washed and spun to prevent the fabrics from
creasing.
Max. load 1 kg.
Final spin speed 900 r.p.m.
Softeners
Hand washed garments can be be starched or softened
with this programme.
Soak 30°
The machine performs 1 rinse, followed by a final long
spin at the maximum speed, which can be reduced by
depressing the “Spin” button.
The final spin is foreseen only for cotton items
as in the spin programme.
This is a special programme for heavily soiled laundry.
The machine performs a soak of about 20 minutes at
30°C. At the end of the soak time the machine will
stop automatically with water left in the tub. The
display will show a flashing zero.
Pour the detergent for the soak programme into the
Drain
compartment marked
.
This programme cannot be used for very delicate
fabrics or Wool.
For emptying out the water of the programme
“Soak 30°” or at the end of a programme with the
“Rinse hold” option.
Turn first the programme selector dial to “Off”, then
select the “Drain” programme and depress the
“Start/Pause” button.
Before starting a new washing phase, it is necessary to
empty out the water by:
• Draining only: turn the programme selector dial to
“Drain” programme”. (Depress the “Start/Pause”
button).
Spin
• Draining and spin: turn the programme selector
dial to programme “Spin”, reduce the spin speed by
means of the “Spin” button, and then depress
“Start/Pause” button.
Separate long spin at the max speed for hand washed
garments. It has to be used for cotton items. You can
reduce the speed by means of “Spin” button to adapt
it to the fabrics to be spun.
Important!
• At the end of the soak (after having emptied out the
water) you can select the washing programme. First
turn the programme selector dial to “Off”, then
select the programme and depress the
30 Minute wash
This is a complete programme that can be combined
with the following options: Spin speed reduction,
“Rinse hold” and “Delay start”.
To be used for laundry which is lightly soiled or which
needs freshening up.
Max. load 2 kg.
Washing temperature 30 C.
Programme duration 30 minutes.
Final spin speed 700 rpm.
“Start/Pause” button.
Note!
• With programme “Soak 30°” it is possible to select
the delay start only up to a maximum of 10 hours and
it corresponds to the soak time of the laundry in the
drum.
Off = Reset programme
Rinse
To reset a programme turn the selector dial to “Off”.
Now a new programme can be selected.
With this programme it is possible to rinse and spin the
garments which have been washed by hand. The
machine performs 3 rinses, followed by a final long spin
at the maximum speed.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Sequence
Before the first wash, we recommend that you run a cotton
4. Switch the machine on
To switch the machine on, press the ON/OFF button:
the mains-on light comes on. To switch the appliance
off, depress the same button.
cycle at 90°C, without any laundry in the machine, to
remove any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the dispenser drawer
and start the machine.
WASHING 5 KG OF WHITE COTTON AT 90°C
Suppose you have 5 kg of laundry to wash. It is white
cotton and is suitable for high temperature washing.
On/Off
---
1.Load the laundry
Open the door.
0
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
If the programme selector dial is on the “Off” (Reset)
position, three flashing dashes will be displayed. If the
programme selector dial is positioned on a wash
programme, a flashing zero appears on the display.
5. Select the desired
programme/temperature
Turn the selector dial to 90° programme. The lights
relevant to the phases that form the programme will
light up.
P0004
2.Measure out the detergent
The display will show the duration of the selected
programme, calculated on the basis of the maximum
load for each type of fabric. The Start/Pause button
light will start flashing.
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent required and pour it into
the main wash compartment
.
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
duration relevant to the maximum load. The duration
value will be gradually adjusted during the cycle.
If you wish to carry out the prewash or a soak
programme, pour detergent into the appropriate
compartment marked
.
3.Measure out the fabric softener
30 Minute wash
Spin
90°
Economy 60°
60°
Off
If required, pour fabric softener into the compartment
Drain
Softeners
Rinse
Economy 40°
40°
marked , without exceeding the «MAX» mark.
30°
Drying
Soak 30°
Cold
2.05
60°
30°
Economy 40°
40°
40°
Delicates 30°
Delicates 40°
Easy iron 40°
Drying
If your laundry needs a soak time, turn the programme
selector dial to “Soak 30°” and then, before starting a
washing cycle, empty the water as described in the
“Soak 30°” paragraph.
C0111
C0112
Close the drawer gently.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
The selected delay time value (up to 23 hours) will
appear on the display for 3 seconds, then the duration
of the programme will appear again.
6. Select the spin speed or the
“Rinse hold” option
Press the “Spin” button repeatedly in order to select
the desired spin speed or the “Rinse hold” option. If
you select the “Rinse hold” option, the machine will
stop at the end of the programme with the water still
in the tub. The relevant light will light up.
Delay
start
1400
900
700
500
Rinse hold
During this period it is possible to load other laundry:
press the “Start/Pause” button. Open the door. Load
the laundry. Close the door and press the
“Start/Pause” button again.
Spin
9. Start the programme
7. Select the desired options
Press the “Start/Pause” button. The relevant light will
stop flashing, and only the light relevant to the phase
that is in progress will remain lit. The machine starts
operating.
If your laundry is very dirty, it may be advisable to
select the “Prewash” option.
If your laundry is only slightly soiled, select the
“Quick” option.
If you have chosen a delayed start, the washer dryer
will begin the countdown.
The display will show the duration of the programme
or the selected delay.
If you wish the laundry to undergo an extra rinse,
select the “Extra Rinse” option.
The relevant light illuminates.
10. How to change an option
or a programme during its
cycle
It is possible to change any option before the
programme carries it out.
Extra
rinse
Prewash Quick
Before you make any change, you must pause the
machine by pressing the “Start/Pause” button.
Changing a running programme is possible only by
resetting it.
Turn the programme selector dial to “Off” and then
to the new programme position.
Start the new programme by depressing the
“Start/Pause” button. The washing water in the tub
will not emptied out.
8. Select the “Delay start”
Before you start the programme, if you wish the
start to be delayed, press the “Delay start” button
repeatedly, or keep it pressed, to select the desired
delay.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
11. How to interrupt a
programme
Depress the “Start/Pause” button to interrupt a
programme which is running, the corresponding light
starts to flash. Depress the button again to restart the
programme.
13. End of programme
At the end of the programme, the machine stops
automatically and displays a flashing zero.
The “End” light illuminates.
If the “Rinse hold” option has been selected, the light
of the “Start/Pause” button goes out, a flashing zero
appears on the display, the “Rinse hold” pilot light and
the “End” light are on (the door will be locked) to
indicate that the water must be emptied out before
opening the door.
12. How to open the door
during the cycle of a
programme
You can open the door, after having set the washer-
dryer to Pause, provided the following conditions exist:
To drain the water or to spin see the paragraphs
“Draining only” or “Draining and spin” on page 18.
Release of the lock is also indicated by the illumination
• the machine is not in the heating phase beyond 55°C;
• the level of the water is not high;
of the “End” light.
Turn the programme selector dial to Reset “Off” and
then press the “On/Off” button to switch the machine
off.
• the drum is not turning.
If these requirements are met, when you pause the
washer dryer, the door can be opened.
Remove the laundry from the washer dryer.
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get damaged
in a subsequent wash (e.g. by shrinking) or bleed colour
into another load of laundry.
Should it not be possible to open the door, and should
it be absolutely necessary to do so, switch the machine
off by pressing the “On/Off button.
After approximately 3 minutes, you can open the door.
Pay attention to the level and temperature of
the water in the washer-dryer!
We advise you to close the water supply tap and
disconnect the plug from the socket.
When you close the door and press the “On/Off”
button again, the machine will resume the programme
from the point where it had been interrupted.
Leave the door ajar in order to air the machine.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Drying
DRYING 2.5 KG OF COTTON
4. Press the “Start/Pause” button to start the
programme.
You have for example just machine-washed and spun at
1400 rpm 5 kg of laundry.
They are cotton fabrics of medium weight which you
want to iron as soon as they are dry.
Remove the laundry from the appliance and divide the
items to obtain two loads of approx. 2.5 kg each.
Start/
Pause
The water tap must be open and the drain hose
must be positioned in the sink or connected to
the drain pipe.
1. Load the laundry.
5. At the end of the programme turn the programme
selector dial to “Off” and press the “On/Off”
button again to switch the machine off.
2. Depress the “On/Off” button to switch the
machine on.
3. Turn the programme selector dial to the “Drying”
6. Remove the laundry.
programme in the Cottons sector.
Note:
4. If you wish to carry out the electronic drying,
depress “Automatic dry” button until the light
“Iron Dry” illuminates.
The programme time will automatically increase by up
to 1 minute, this is quite normal.
Extra dry
Store dry
Iron dry
AUTODRYING 1.5 KG OF SYNTHETICS
Warning! For NON-STOP programmes, it is also
essential not to exceed the maximum load sizes of 2.5
kg for cotton and 1.5 kg for synthetics.
Automatic
dry
You intend to wash and dry automatically 1.5 kg of
synthetics which do not need ironing.
If you want a timed drying, depress the “Time dry”
button until the time you want appears on the display
(see page 19).
Do not use a dosing device/ball when carrying
out a washing & drying programme.
1. Load the laundry.
2. Add detergent and fabric softener.
55
3. Switch the machine on by depressing the “On/Off”
button. Turn the selector dial to a programme for
synthetics.
Time
dry
4. Select the wash programme/fabric and temperature.
5. Select the drying time or degree of drying.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select the required options by means of the relevant
buttons. If possible, do not select a spin speed lower
than that proposed by the appliance to avoid a too
long drying time so saving energy.
In any case the reduction of the spin speed is only
possible after selecting drying. The lowest values
you can select are the following:
- 900 r.p.m. for Cottons & Synthetics with electronic
drying
- 900 r.p.m. for Cottons and 700 r.p.m. for
Synthetics with timed drying
7. Start the programme by depressing the
“Start/Pause” button.
8. At the end of the programme turn the programme
selector dial to “Off” and depress the “On/Off”
button again to switch the machine off.
9. Remove the laundry.
Important!
During drying the door can only be opened for the first
10 minutes and at the end of drying (after the cooling
phase).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing and Drying Hints
●
Do NOT overload the machine. Weigh the laundry the
Some stains such as fruit, wine, grass, rust etc. are
first few times you use the appliance.
difficult to remove and should be treated before
washing with specific products, which can be found
in most household shops. In some cases it may help
to soak the stain before washing with a special pre-
soak product or biological detergent.
The average weights of the most common items are
listed below as a guide:
1000g = 1 kg
●
If you have used the machine to wash, rinse or spin
only non-colour fast garments, there may be dye left
in the sump. To ensure any subsequent wash is not
contaminated with the dye, select and carry out a
rinse and spin programme, without any garments, to
ensure that any dye is removed from the sump.
Sheet
700-1000 g
100-200 g
400-500 g
50-100 g
Pillow case
Tablecloth
Serviette
●
●
●
Do not leave the damp laundry load in a heap too
long before drying.
Avoid drying dark clothes with light coloured fluffy
items such as towels as these can attract the fluff.
If you overdry the laundry, besides wasting energy,
any subsequent ironing may become more difficult
because the fabric could be heavily crumpled.
Remove the laundry when the appliance has finished
drying.
To avoid a static charge when drying is completed,
use either a fabric softener when you are washing
the laundry or a fabric conditioner specifically for
tumble dryers.
Particularly delicate items such as synthetic curtains,
woollen and silk, garments with metal inserts, nylon
stockings, bulky garments such as anoraks,
bedcovers, quilts, sleeping bags and duvets must not
be machine dried.
Garments padded with foam-rubber or materials
similar to foam-rubber must not be machine dried;
they represent a fire hazard.
Also, fabrics containing residues of setting lotions or
hair sprays, nail solvents or similar solutions must
not be machine dried in order to avoid the
formation of harmful vapours.
Tea towel
70-120 g
Linen hand towel
Towelling hand towel
Towelling bath towel
Bath robe
100-150 g
150-250 g
700-1000 g
1000-1500 g
200-300 g
150-200 g
Man’s shirt
●
●
Apron
●
Load the laundry loosely alternating large items with
small ones.
●
●
●
●
Sort the laundry according to the type of fabric,
colour-fastness and how dirty it is.
Avoid washing unhemmed or torn items as they
may unravel.
Before washing, empty all pockets of small objects
which may have been left inside (coins, keys, screws
etc). as these could damage the drain pump.
●
●
●
●
●
When washing curtains, remove the hooks.
Close poppers and zips and fasten loose buttons.
It is essential to wash new coloured items separately
when washing for the first time.
●
●
For drying, follow the indications given on the
manufacturer’s labels.
When washing fabrics requiring different wash
temperatures together, always select the lowest
temperature.
White items should not be washed with coloured
items.
Very small items (handkerchiefs, ribbons, socks etc)
should be washed in a washing bag or a pillow case.
Use a good quality detergent suitable for automatic
washing machines.
Use the correct quantities of detergent.
For wool, use gentle detergent only in small
quantities.
Bleach is very corrosive; it should be used with care
and kept out of reach of children.
May be tumble dried
●
●
●
Drying at high temperature
Drying at reduced temperature
Do not tumble dry
Important!
As a dryer, the machine works on the condensation
principle.
●
●
Therefore, the water tap must be open and
the drain hose must drain water into a sink
or into the drain pipe, even during the drying
cycle.
●
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash Care Symbols
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct
programme on your washing machine.
WASHING SYMBOL
WASH ACTION
FABRIC
White Cotton or Linen
without Special Finishes
Normal (Maximum)
95
Cotton, Linen or Viscose
without Special Finishes
Colourfast at 60°C.
Normal (Maximum)
60
50
Nylon, Polyester/Cotton, Viscose
with Special Finishes,
Cotton/Acrylic Mix.
Reduced (Medium)
Normal (Maximum)
Reduced (Medium)
Cotton, Linen or Viscose
Colourfast at 40°C but not 60°C.
40
40
Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.
Much Reduced (Minimum)
Hand wash only
Wool, wool mixtures, Silks
Do not machine wash
40
BLEACHING
Chlorine bleach may be used
IRONING
Cotton, Linen, Viscose
Polyester mixtures, Wool
Acrylic, Nylon, Polyester
Hot iron
Warm iron
Cool iron
DRY CLEANING
TUMBLE DRYING
May be dry cleaned. Other letters and/or a bar beneath the circle will
indicate the required process to the dry cleaner.
with high heat setting
with low heat setting
May be tumble dried
A cross through any symbol means «DO NOT»
X
fabric conditioner to avoid the conditioner entering the
machine prematurely.
When using liquid detergent and a prewash
programme, place the detergent into the correct
compartment in the dispenser drawer, after the
prewash has finished.
Important Notes
For best results, always use the dispenser drawer for
dispensing detergents and liquid additives.
Once the dispenser has been filled, close it by pushing
it in gently. This is particularly important if you are using
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Consumptions*
Programme/
Type of laundry
Available options
Load
Fabrics
Energy
Water
litres
Time
min.
temperature
kWh
Spin red./Rinse hold
Prewash
Sheets, household
linen, towels,
tablecloths
90°
White
5 Kg
1.9
52
49
142
136
cotton
Cottons
Quick
Extra rinse
Economy
60°
Sheets, household
linen, towels,
tablecloths
Spin red./Rinse hold
Prewash
White
cotton
5 Kg
5 Kg
0.85
Extra rinse
Cottons
Fast coloured and
non-fast items, for
example hand towels,
sheets, underwear,
tablecloths, shirts,
blouses
60°
40° - 30°
Spin red./Rinse hold
Prewash
White and
coloured
cotton
1.2
49
121
Quick
Extra rinse
Cottons
Economy
40°
Coloured items, for
example underwear,
shirts, blouses
Spin red./Rinse hold
Prewash
Coloured
cotton
5 Kg
2 Kg
0.90
49
41
41
39
58
141
89
Extra rinse
Cottons
Spin red./Rinse hold
Prewash
Shirts, blouses,
underwear, mixed
fabrics
60° - 40°-
Synthetics
Synthetics
Synthetics
Synthetics
Delicates
0.85
0.5
Quick
Extra rinse
Economy
40°
Synthetics
Shirts, blouses,
underwear, mixed
fabrics
Spin red./Rinse hold
Prewash
2 Kg
1 Kg
2 Kg
89
Extra rinse
Spin red./Rinse hold
Prewash
Easy iron
40°
Shirts, blouses,
underwear, mixed
fabrics
0.35
0.55
102
58
Quick
Extra rinse
Synthetics
Spin red./Rinse hold
Prewash
30° - 40°
Delicates
Acrylic, polyester
items, curtains, duvets
Quick
Extra rinse
Garments bearing the
“ Pure new wool,
non-shrink, machine
washable” or “Hand
wash” label
40° -
30° - Cold
Wool
Spin reduction/
Rinse hold
Wool
1 kg
58
57
0.4
The “Cottons Economy 60°” programme (white cottons) is the reference programme for the data entered in the
energy label, in compliance with EEC 92/75 standards.
* This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of
laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest
temperature provided for each programme.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Consumptions*
Programme
description
Load
Programme
Available options
Time
Energy
Water
litres
min.
kWh
Soak for 30 minutes
at 30°C
Soak 30°
5 Kg
0.3
18
19
Spin reduction/
Rinse hold
3 rinses
Long spin
at the max speed
47
23
Rinse
5 Kg
5 Kg
0.1
-
40
Extra rinse
1 rinse with liquid
additive
Long spin at max.
speed
Spin reduction/
Rinse hold
Softeners
16
Drain
For emptying out after
the programme “Soak
30° ” or at the end of a
programme with “Rinse
hold” option
5 Kg
5 Kg
-
-
Water draining
-
2
-
Drain and long spin at
max. speed
Spin
-
10
Spin reduction
30 Minute wash
Short cycle for lightly
soiled fabrics
Wash at 30°C
2 rinses
Short spin
Spin reduction/
Rinse hold
2 Kg
0.3
40
30
For cancelling the
programme which is
running
-
-
-
-
Off (Reset)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Drying Programmes
Timed drying
Degree of
drying
Drying time
mins
Type of fabric
Max. load
Spin speed
2.5 kg
1 kg
105-115
50-60
1400
1400
1400
1400
Extra dry
Ideal for towelling
materials
Cotton and linen
(bathrobes, bath
towels, etc.)
95-105
40-50
2.5 kg
1 kg
Cotton and linen
(towels, T-shirts,
bathrobes)
Store dry (*)
Suitable for items
to put away
without ironing
Synthetics and mixed
fabrics (jumpers,
blouses, underwear,
household linen)
1.5 kg
1, kg
900
900
100-110
55-65
2.5 kg
1. kg
65-75
30-35
1400
1400
Iron dry
Suitable for
ironing
Cotton and linen
(sheets, tablecloths,
shirts, etc.)
(*) The STORE DRY drying programme for cotton is the reference programme for the Energy Label data, in
compliance with EC directive 92/75.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Before any maintenance or cleaning is carried out you
must DISCONNECT the appliance from the
electricity supply.
Descaling
The water we use normally contains lime. It is a good
idea to periodically use a water softening powder in the
C0114
C0113
machine. Do this separately from any laundry washing,
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
Cleaning the drawer recess
Having removed the drawer, use a small brush to clean
the recess, ensuring that all washing powder residue is
removed from the upper and lower part of the recess.
Replace the drawer and run the rinse programme
without any clothes in the drum.
After each wash
Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the appliance.
Keeping the door open after a wash will also help to
preserve the door seal.
Maintenance Wash
With the use of low temperature washes it is possible
to get a build up of residues inside the drum.
We recommend that a maintenance wash be
performed on a regular basis.
P0038
To run a maintenance wash:
Cleaning the filter
The water drain filter
●
The drum should be empty of laundry.
●
Select the hottest cotton wash programme.
●
Use a normal measure of detergent, must be a
powder.
A clean filter is important for the correct functioning of
the machine, and should therefore be cleaned after
every washing programme.
External cleaning
Place a container under the filter to catch any spillage. If
the filter is blocked and the machine is unable to drain
you will need to drain the water manually from the
machine at this stage. To do this, unhook the drain
hose from the standpipe or sink and hold the end of
the hose over a bowl on the floor. The water should
drain by gravity into the bowl. When the bowl is full,
hook the hose back up and empty the bowl. Repeat the
procedure until water stops flowing out.
Clean the exterior cabinet of the appliance with soap
and water only, and then dry thoroughly.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
Remove the drawer by pressing the catch downwards
and by pulling it out. Flush it out under a tap, to
remove any traces of accumulated powder.
To aid cleaning, the top part of the additive
compartment should be removed.
P0037
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Unscrew and remove the filter.
The dangers of freezing
Clean carefully under a fast running tap.
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
●
Turn off the water tap.
●
Unscrew the inlet hose.
●
Unhook the drain hose from the rear support and
position the end of this hose and that of the inlet
hoses in a bowl. Run the draining programme.
To do this:
P0040
P0039
●
Switch the machine on
●
Select the “Drain” programme
Warning
●
Press “Start/Pause” button
When the appliance is in use and depending on the
programme selected there can be hot water in the
pump. Never remove the pump cover during a wash
cycle, always wait until the appliance has finished the
cycle, and is empty. When replacing the cover, ensure it
is securely retightened so as to stop leaks and young
children being able to remove it.
●
Disconnect the appliance .
●
Screw the inlet hose and reposition the drain hose.
●
When you intend to start the machine up again,
make sure that the room temperature is above 0°C.
Emergency emptying out
If the water is not discharged, proceed as follows to
empty out the machine:
Cleaning the water inlet filter
If your water is very hard or contains traces of lime
deposit, the water inlet filter may become clogged.
It is therefore a good idea to clean it from time to time.
Turn off the water tap.
Unscrew the water inlet hose.
Clean the filter using a hard bristle brush.
Tighten up the inlet hose.
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled down;
• open the filter;
• place a bowl on the floor under the filter.
• slightly loosen the filter to let the water come out
slowly;
• clean the filter if necessary as previously described;
• screw the filter again and close the door.
P1090
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily
without calling out an engineer. Before contacting your local Service Force Centre (see page 33 ,
Service and Spare Parts), please carry out the checks listed below.
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by
incorrect use or installation, a charge will be made even if the appliance is under guarantee.
During machine operation it is possible that the “End” light starts to flash, one of the following alarm codes appears
on the display and in the same time the buzzer sounds:
E 10
E 2 0
E 40
-
-
-
: problem with the water supply
: problem with water draining
: door open
Once the problem has been eliminated, press the “Start/Pause” button to restart the programme. If after all
checks, the problem persists, contact your local Service Force Centre.
Symptom
Solution
●
The machine does not start
E 40
The door has not been closed. (
)
●
The plug is not properly inserted in the power socket.
There is no supply at the socket.
The main fuse or the fuse in the plug has blown.
The “Start/Pause” button has not been depressed.
The “Delay start” option has been selected.
●
●
●
●
●
●
●
●
The machine does not fill
E 10
The water tap is closed. (
The filter in the inlet hose is blocked. (
The inlet hose may be squashed or kinked. (
)
E 10
)
E 10
)
E 40
The door has not been closed. (
)
●
●
●
The machine fills then empties
immediately
The end of the drain hose is too low.
The end of the drain hose is submerged in water.
There is no vent in the end of the drain hose.
●
●
●
●
●
E 2 0
The drain hose may be squashed or kinked. (
)
The machine does not empty
and/or does not spin
E 2 0
The drain filter may be blocked. (
)
The “Rinse hold” option has been selected.
The drainage system pipes are blocked.
The programme “Soak 30°”, which ends with water left in the tub,
has been selected.
●
The wash load is unbalanced: redistribute the clothes inside the drum
to allow the machine to spin.
●
●
Too much detergent or unsuitable detergent has been used (creates
too much foam).
Check whether there are any leaks from the inlet hose fittings. It is not
always easy to see this as the water runs down the hose; check to see
if it is damp.
There is water on the floor
●
●
The drain hose may be damaged or not securely positioned.
The filter has not been fully screwed in after cleaning.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Solution
●
Too little detergent or unsuitable detergent has been used. An
Unsatisfactory washing results
insufficient amount of detergent leaves the laundry looking grey and
causes lime scale to form.
●
Stubborn stains have not been treated prior to washing
●
The correct wash programme/temperature has not been selected.
●
Too much laundry has been placed in the drum.
●
The machine vibrates when
spinning
The internal packing has not been removed.
●
●
●
●
The machine is in contact with the wall or furniture.
The machine is not level and stable (check diagonally).
The washing load is badly distributed in the drum.
Maybe there is very little laundry in the drum.
●
●
●
The door will not open
The water level is above the bottom edge of the door.
The machine is heating the water or drying the laundry.
The drum is turning.
●
The electronic balance control device has cut in because the laundry is
not evenly distributed in the drum. The laundry is redistributed by
reverse rotation of the drum. This may happen several times before
the unbalance disappears and normal spinning can resume. If, after few
minutes, the laundry is still not evenly distributed in the drum, the
machine will not spin. In this case, redistribute the load manually and
select the spin programme.
Spinning starts late or the
machine does not spin
●
●
The machine makes an unusual
noise
The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor
ensures a softer start and more even distribution of the laundry in the
drum when spinning, as well as increased stability of the machine.
No water is visible in the drum
Machines based on modern technology operate very economically
using very little water without affecting performance.
●
●
●
●
●
The machine does not dry or
does not dry properly
The drying time or degree of drying has not been selected
E 10
The water tap is not turned on (
)
E 2 0
The drain filter is clogged (
The machine is overloaded
)
The selected drying time or degree of dryness was not suitable for the
laundry.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Please note that a valid purchase receipt is
required for in-guarantee service calls.
Service & Spare Parts
In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact our
extended warranty administrators by telephoning:
0870 01 07887
P
r o
M
d
N
o d
.
.
. . . . . . . . . .
. . . . . . . . . . .
o
.
S
e
r
.
N
o
. . . . . . . . .
.
They will give you details for your local Service Force
Centre.
Service Force are the appointed national appliance
repair agents responsible for warranty repairs to this
appliance.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042 BD
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working”.
When you contact the Service Centre you will need to
give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault
4. The model and serial number of the appliance
(found on the rating plate - see picture)
5. Your washer-dryer is covered by a 3 year parts and
labour guarantee (see separate details given at point
of sale). Please retain your purchase receipt safely
for the service .
33
Download from Www.Somanuals.com. All Manuals Search And Download.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
132 984 840
Download from Www.Somanuals.com. All Manuals Search And Download.
|