Jackson Dishwasher AJ 100 User Manual
SECTION 5:  
PARTS SECTION  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
AJ-64 CONTROL BOX ASSEMBLY (CONTINUED)  
ITEM  
1
2
3
4
QTY  
1
1
1
6
2
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
4
1
1
12  
4
1
1
DESCRIPTION  
Electrical Box Weldment  
Decal, L1-L2-L3  
Terminal Block  
Mfg. No.  
05700-041-88-50  
09905-101-12-66  
05940-011-48-27  
05311-273-02-00  
05305-011-62-17  
05945-111-44-44  
05945-111-44-44  
05940-200-76-00  
05945-111-44-45  
05700-021-72-75  
05305-011-39-36  
05311-174-01-00  
09905-011-86-86  
05940-002-78-97  
05945-111-68-38  
05945-111-68-38  
05945-111-68-38  
05925-011-68-34  
N/A  
Lockwasher, #10  
5
Screw, 10-32 x 3/4” Long Phillips Trusshead  
Light, Amber (Wash Heater Overload) (Not used on steam or gas models)  
Light, Amber (Rinse Heater Overload) (Not used on steam or gas models)  
Wire Lug, 2 AWG to 14 AWG  
Light, Red (Power)  
6a  
6b  
7
8
9
Din Rail  
10  
11  
12  
13  
14a  
14b  
14c  
15  
16a  
16b  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
Screw, 10-32 x 1/2” Long Phillips Trusshead  
Washer, Flat, 1/4”  
Decal, Ground  
Terminal Board  
Drive Motor Contactor  
Wash Pump Motor Contactor  
Recirculating Rinse Pump Motor Contactor  
Circuit Breaker (208 & 230 volt models only)  
Recirculating Rinse Pump Motor Overload (See motor overloads chart)  
Wash Pump Motor Overload (See motor overloads chart)  
Switch, ON/FILL & OFF/DRAIN  
Drive Motor Overload (See motor overloads chart)  
Terminal Board  
Heater Contactor (Not available on steam or gas models)  
Screw, 10-32 x 3/8” Long Phillips Trusshead  
Transformer  
Locknut, 10-24 with Nylon Insert  
Fuse Holder (460 volt models only)  
Fuse (460 volt models only)  
Screw, 6-32 x 3/8” Long Phillipshead  
Control Relay, 2 Pole  
Relay, 3 Pole  
Rinse Thermometer  
Decal, Rinse 180°F  
Wash Thermometer  
Decal, Wash 150°F  
Power Rinse Thermometer  
Decal, Power Rinse 160°F  
N/A  
05930-011-49-55  
N/A  
05940-021-89-41  
05945-002-24-70  
05305-173-12-00  
05950-011-68-35  
05310-373-01-00  
05920-011-72-89  
05920-011-72-88  
05305-171-02-00  
05945-111-35-19  
05945-111-72-51  
06685-111-68-49  
09905-002-97-62  
06685-111-87-13  
09905-002-97-61  
06685-111-87-13  
09905-003-01-31  
09905-021-82-65  
30  
31  
32  
1
1
1
Decal, Gauge  
Items not shown:  
Grommet, 1/2” OD x 3/8” ID  
Bushing, Heyco SB100  
Plug, Heyco 2700 G-875  
Control Box Cover  
Control Box Cover Hinge Weldment  
Control Hinge Rod  
MANUAL/DELIME Switch (Located on rear of contol box)  
MANUAL/DELIME Decal  
Copper Conductors Only Decal  
Control Box Leg  
05325-011-46-73  
05975-210-09-00  
05975-011-47-81  
05700-031-66-88  
05700-021-68-57  
05700-011-68-58  
05930-301-22-18  
09905-011-74-61  
09905-011-47-35  
05700-011-71-47  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
AJ-86 & AJ-100 CONTROL BOX ASSEMBLY  
1
2
3, 4, 5  
6b  
4, 7, 10, 11, 12  
6a  
14d  
14c  
14b  
14a  
16a  
8
16b  
15  
18  
17  
18  
22, 23  
20, 21  
24, 25, 26  
29a  
26, 27  
29b  
26, 28  
13, 26  
30a  
30b  
19, 26  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
AJ-86 & AJ-100 CONTROL BOX ASSEMBLY (CONTINUED)  
ITEM  
1
2
3
4
QTY  
1
1
1
6
2
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
4
1
1
12  
7
3
DESCRIPTION  
Electrical Box Weldment  
Decal, L1-L2-L3  
Terminal Block  
Mfg. No.  
05700-041-88-50  
09905-101-12-66  
05940-011-48-27  
05311-273-02-00  
05305-011-62-17  
05945-111-44-44  
05945-111-44-44  
05940-200-76-00  
05945-111-44-45  
05700-021-94-96  
05305-011-39-36  
05311-174-01-00  
09905-011-86-86  
05940-002-78-97  
05945-111-68-38  
05945-111-68-38  
05945-111-68-38  
05945-111-68-38  
05925-011-68-34  
N/A  
Lockwasher, #10  
5
Screw, 10-32 x 3/4” Long Phillips Trusshead  
Light, Amber (Wash Heater Overload) (Not used on steam or gas models)  
Light, Amber (Rinse Heater Overload) (Not used on steam or gas models)  
Wire Lug, 2 AWG to 14 AWG  
Light, Red (Power)  
Din Rail  
Screw, 10-32 x 1/2” Long Phillips Trusshead  
Washer, Flat, 1/4”  
Decal, Ground  
Terminal Board  
Drive Motor Contactor  
6a  
6b  
7
8
9
10  
11  
12  
13  
14a  
14b  
14c  
14d  
15  
16a  
16b  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29a  
Wash Pump Motor Contactor  
Recirculating Rinse Pump Motor Contactor  
Prewash Pump Motor Contactor  
Circuit Breaker (208 & 230 volt models only)  
Recirculating Rinse Pump Motor Overload (See motor overloads chart)  
Wash Pump Motor Overload (See motor overloads chart)  
Switch, ON/FILL & OFF/DRAIN  
Drive Motor Overload (See motor overloads chart)  
Terminal Board  
Heater Contactor (Not available on seam models)  
Screw, 10-32 x 3/8” Long Phillips Trusshead  
Transformer  
Locknut, 10-24 with Nylon Insert  
Fuse Holder (460 volt models only)  
Fuse (460 volt models only)  
Screw, 6-32 x 3/8” Long Phillipshead  
Control Relay, 2 Pole (5 for Gas models, 1 not shown)  
Relay, 3 Pole (Gas models only)  
Rinse Thermometer, 96” (L-R & R-L models)  
Decal, Rinse 180°F  
Power Rinse Thermometer, 96” (L-R models)  
Power Rinse Thermometer, 120” (R-L models)  
Decal, Power Rinse 160°F  
Wash Thermometer, 120” (L-R models)  
Wash Thermometer, 96” (R-L models)  
Decal, Wash 150°F  
Prewash Thermometer, 120” (L-R & R-L models)  
Power Rinse Thermometer  
N/A  
05930-011-49-55  
N/A  
05940-021-89-41  
05945-002-24-70  
05305-173-12-00  
05950-011-68-35  
05310-373-01-00  
05920-011-72-89  
05920-011-72-88  
05305-171-02-00  
05945-111-35-19  
05945-111-72-51  
06685-111-68-49  
09905-002-97-62  
06685-111-68-49  
06685-111-87-13  
09905-003-01-31  
06685-111-87-13  
06685-111-68-49  
09905-002-97-61  
06685-111-87-13  
06685-111-87-13  
09905-003-01-31  
09905-021-82-65  
1
29b  
29b  
1
1
30a  
30a  
1
1
30b  
31  
1
1
Decal, Power Rinse 160°F  
Decal, Gauge  
32  
1
Items not shown:  
Grommet, 1/2” OD x 3/8” ID  
Bushing, Heyco SB100  
Plug, Heyco 2700 G-875  
Control Box Cover  
Control Box Cover Hinge Weldment  
Control Hinge Rod  
MANUAL/DELIME Switch (Located on rear of contol box)  
MANUAL/DELIME Decal  
Copper Conductors Only Decal  
Control Box Leg  
05325-011-46-73  
05975-210-09-00  
05975-011-47-81  
05700-031-66-88  
05700-021-68-57  
05700-011-68-58  
05930-301-22-18  
09905-011-74-61  
09905-011-47-35  
05700-011-71-47  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
MOTOR OVERLOADS  
AJ-64 SERIES MOTOR OVERLOAD CHART:  
208-230V/60 HZ/1 PHASE  
Not Applicable  
208-230V/60 HZ/3 PHASE  
05945-111-68-39  
Not Applicable  
460V/60 HZ/3 PHASE  
05945-111-69-12  
Not Applicable  
Drive Motor  
PreWash Motor  
Wash Motor  
Not Applicable  
Not Applicable  
05945-111-68-40  
05945-111-68-40  
05945-111-68-41  
05945-111-68-41  
Power Rinse Motor  
Not Applicable  
AJ-86 SERIES MOTOR OVERLOAD CHART:  
208-230V/60 HZ/1 PHASE  
Not Applicable  
208-230V/60 HZ/3 PHASE  
05945-111-68-39  
460V/60 HZ/3 PHASE  
05945-111-69-12  
05945-111-69-13  
05945-111-68-41  
05945-111-68-41  
Drive Motor  
PreWash Motor  
Wash Motor  
Not Applicable  
Not Applicable  
Not Applicable  
05945-111-68-41  
05945-111-68-40  
Power Rinse Motor  
05945-111-68-40  
AJ-100 SERIES MOTOR OVERLOAD CHART:  
208-230V/60 HZ/1 PHASE  
208-230V/60 HZ/3 PHASE  
05945-111-68-39  
460V/60 HZ/3 PHASE  
05945-111-69-12  
05945-111-68-41  
05945-111-68-41  
05945-111-68-41  
Drive Motor  
Not Applicable  
Not Applicable  
Not Applicable  
Not Applicable  
PreWash Motor  
Wash Motor  
05945-111-68-40  
05945-111-68-40  
Power Rinse Motor  
05945-111-68-40  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
HEATER BOX ASSEMBLY  
5
4
2
3
6
1
See Heater Assembly Page  
ITEM  
QTY  
DESCRIPTION  
Heater Box Cover  
Kit, Thermostat, Wash Regulating (Electrically Heated)  
Kit, Thermostat, Wash Regulating (Steam Heated)  
Thermostat, High Limit  
Terminal Board  
Fitting, 1/4”, Imperial Brass  
Heater Box Weldment  
Mfg. No.  
1
2
2
3
4
5
6
1
1
1
1
1
1
1
05700-031-81-61  
06401-003-18-20  
06401-003-18-21  
05930-011-49-43  
05940-002-78-97  
05310-924-02-05  
05700-002-41-18  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
HEATER ASSEMBLY  
See Heater Chart Below  
5/16” Lockwasher  
05311-275-01-00  
Heater Gasket  
05330-011-47-79  
5/16”-18 Hex Nut  
05310-275-01-00  
Heater Chart  
Phase KW  
Model  
Volts  
Part Number  
All*  
208  
230  
208  
230  
460  
1
1
3
3
3
10  
10  
10  
10  
10  
06401-003-12-94  
06401-003-12-95  
06401-003-12-94  
06401-003-12-95  
06401-003-12-96  
Heater Chart  
Model  
All*  
KW  
15  
208V Models  
230V Models  
460V Models  
04540-121-68-45  
04540-121-68-46  
04540-121-68-47  
* - “CS” & “CGP” models do not use electric heaters in the wash tank or power rinse tank.  
SERVICE NOTE: When replacing the tub heaters, it is HIGHLY recommended that you also change out the gasket as well.  
Once installed, gaskets become compressed and are subjected to extreme temperature changes. Replacing the gasket with a  
new one when replacing the heater may prevent future leaks.  
SERVICE NOTE: The nuts used to secure the heater to the tub should be torqued to 16 in-lbs. After tightening, the unit should  
be allowed to heat up and operate normally for approximately 30 minutes. Secure power to the machine and check the nuts  
once more to ensure that they are torqued to 16 in-lbs.  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
HEATER ASSEMBLY (CONTINUED)  
The wash tank heater system is electrically connected in the circuit so that they are dependent upon the dishwasher being prop-  
erly filled with and maintaining a safe water level, two thermostats (mounted in the heater box behind the dress panel), float  
switch (mounted in the wash tank), and the heater relay (mounted in control box) with the heater being activated by the ther-  
mostats.  
Once the dishwasher has been filled to the correct level, the heater should operate automatically. Should the tank heat be too  
high, too low or no indication of temperatures at all, the following checkout should be made.  
Note: The following checkout should be made by either a qualified service person or electrician.  
A- Checkout of the heater system  
1- If the temperature is too high, adjust thermostat using instructions on the page entitled “Thermostats”.  
2- If temperature is too low, adjust thermostat as above, then:  
a - Turn off power to machine by placing customer’s circuit breaker in the “OFF” position. Turn off machine  
circuit breaker located on right side of control box.  
b - Remove cover from control box on top of dishwasher.  
c - Make sure water temperature is below 140° F.(preferably about 130°F.).  
d - Turn on both circuit breakers. Observe heater relay (R1) while the power switch is turned “ON” and “OFF”.  
If relay contacts move in and out, the heater relay is operating correctly: if not proceed to “C”.  
B- If heater relay (R1) closes:  
1 - Check power supply at incoming terminal board L1, L2 & L3. It should be the same voltage as indicated on  
the machine data plate.  
2 - Check power at connections on heater relay (R1). The voltage should agree with the voltage on the  
machine data plate. If not, check wires for breaks or bad connections.  
3 - Check power at terminals of heater which should agree with the data plate. If not check wires for breaks or  
bad connections.  
4 - Temperatures should rise as explained in “C-1”, and amperage may be checked according to those instruc-  
tions. Replace any defective elements.  
C - If heater relay (R1) does not close.  
1 - There is an insulated movable insulated movable bar on relay across the top. With an insulated probe, depress  
this bar and observe the thermometer: the temperature should rise noticeably in a minute or two. If it moves slow-  
ly, it would indicate that the element is faulty. If it moves constantly higher at a good rate, elements should be  
good.  
Note: A check with an amp probe at heater relay (R1) terminals should be made to verify the amp draw on each leg.  
This should be appropriate for the voltage and phase indicated on the data plate  
HEATER PROTECTION & AUTOMATIC FILL  
This control is activated when the power switch is turned “ON”. The primary function is to automatically energize the wash tank  
heat circuit. It will also cutoff the wash tank heat circuit should the water be accidently drained from the machine with the power  
switch still “ON”. The power switch should always be turned-off before draining the unit.  
This water level control consists of two (2) floats that operate when the power switch is turned on and works in conjunction with  
the thermostats and heater relays.  
When the power switch is turned “ON” water starts to enter the dishmachine. When it reaches the proper level the normally  
open contacts in the water level float switch close activating the heating circuit for tank heat.  
If the water level below the correct level while power is still on, the float switch will sense the lack of water and de-activate the  
heater.  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
FRAME WELDMENTS/DRESS PANELS  
FRAME WELDMENTS  
Model  
Left to Right Part Number  
Right to Left Part Number  
AJ-64’s  
AJ-86’s  
AJ-86CGP  
AJ-100’s  
AJ-100CGP  
05700-002-73-00  
05700-041-83-65  
05700-041-83-65  
05700-041-91-00  
05700-041-91-00  
05700-002-73-00  
05700-041-83-65  
05700-041-83-65  
05700-041-91-00  
05700-041-91-00  
Bullet Feet (4 per model) - order using part number 05340-011-71-74.  
FRONT DRESS PANELS  
Model  
Left to Right Part Number  
Right to Left Part Number  
AJ-64’s  
AJ-86’s  
AJ-86CGP  
AJ-100’s  
AJ-100CGP  
05700-002-40-41  
05700-031-83-68  
05700-002-89-68  
05700-041-94-89  
05700-041-94-89  
05700-002-40-41  
05700-041-86-60  
05700-041-86-60  
05700-041-91-06  
05700-041-91-06  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
PREWASH PLUMBING ASSEMBLY  
Vacuum Breaker, 3/4”  
04820-002-53-77  
Valve, Solenoid, 3/4”  
04810-100-53-00  
Elbow, 90°, 3/4” Brass  
04730-206-04-34  
Nipple, 3/4”, Brass, Close  
04730-207-34-00  
Nipple, 3/4” x 6” Long  
05700-001-26-74  
A new gasket can be  
ordered using part num-  
ber 05330-111-42-81.  
Fill Line Injector  
05700-011-67-99  
Nipple, 3/4”, Brass, Close  
04730-207-34-00  
Y-Strainer, 3/4” NPT,  
Brass  
04730-717-02-06  
Elbow, 90°, 3/4” Brass  
04730-206-04-34  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
INCOMING PLUMBING ASSEMBLY (ELECTRIC & GAS HEATED MODELS)  
19a  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
INCOMING PLUMBING ASSEMBLY(CONTINUED)  
ITEM  
1
1
2
3
4
5
6
7
QTY  
1
1
2
3
3
5
6
3
3
4
2
1
2
2
2
1
1
1
2
1
1
1
1
1
DESCRIPTION  
Mfg. No.  
Injector, Rinse Weldment (L-R all units)  
Injector, Rinse Weldment (R-L CGP units only)  
Fill Line, Injector  
05700-021-67-98  
05700-002-57-87  
05700-011-67-99  
04730-209-07-37  
04820-002-53-77  
04730-206-04-34  
04730-207-34-00  
04810-100-53-00  
04730-212-05-00  
04730-401-11-01  
04730-411-46-01  
05700-000-54-85  
05700-001-26-74  
04730-411-03-01  
04730-401-41-01  
04810-011-72-67  
06685-111-88-34  
09905-002-97-74  
05700-011-72-72  
04730-209-01-00  
06685-011-58-22  
04730-206-13-00  
05700-000-75-61  
05700-011-31-48  
05700-002-61-46  
Plug, 1/8” NPT, Brass  
Vacuum Breaker, 3/4” NPT, Brass  
Elbow, 3/4” NPT, Street, Brass  
Nipple, 3/4” NPT, Close, Brass  
Valve, Solenoid, 3/4” NPT, 110 Volt  
Union, 3/4” NPT, Brass  
8
9
Adapter, 3/4” Male  
10  
11  
12  
13  
14  
15  
16  
Tee, Copper, 3/4” CU x CU x CU  
Tube, Copper, 3/4” x 3” Long  
Nipple, 3/4” NPT, Brass, 6” Long  
Tee, Copper, 3/4” x 3/4” x 1/2”  
Adapter, Threaded, 1/4”  
Valve, Ball, Test Cock, 1/4” NPT  
Gauge, 0-100 PSI  
Decal, 15-25 PSI  
Tube, 3/4” x 2-13/16” Long  
Plug, 1/4”  
Regulator, Pressure, 3/4” NPT (Not used on CGP models)  
Elbow, 3/4” 90° Brass (Used on CGP models only)  
Tube, 3/4” x 9” Long  
17  
18  
19  
19a  
20  
21  
22  
Tube, 3/4” x 16-1/4” Long  
Tube, 3/4” x 5-1/2” Long  
2
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
RINSE HEADER PLUMBING ASSEMBLY (CGP MODELS)  
Complete Plumbing Assembly  
05700-002-51-16  
Valve, 3/4” Pressure Reducing  
04820-002-51-53  
Y-Strainer, 3/4” Brass  
Solenoid Valve, 3/4” 110V  
04810-100-53-00  
04730-717-02-06  
Nipple, 3/4” Close Brass  
04730-207-34-00  
Incoming Plumbing Support Bracket  
05700-002-50-70  
Inlet Plumbing Mounting Bracket  
2 per  
05700-002-51-41  
Incoming Piping Assembly  
05700-002-51-15  
Clamp, Pipe  
2 per  
05700-000-35-06  
Elbow, 3/4” NPT 90° Brass  
04730-206-13-00  
Nipple, 3/4” Close Brass  
04730-207-34-00  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
EXTERNAL ELECTRIC BOOSTER INCOMING PLUMBING ASSEMBLIES  
Plumbing with Water Hammer Arrestor  
1
2
10  
3
8
9
11  
7
9
8
4
5
6
Plumbing without Water Hammer Arrestor  
6
3
4
1
7
6
5
ITEM  
QTY  
DESCRIPTION  
Mfg. No.  
1
2
3
4
5
6
7
8
-
-
-
-
-
-
-
-
-
-
-
Y-Strainer, 3/4” NPT, Brass  
Arrestor, Water Hammer, 1/2” NPT  
Regulator, Pressure, 3/4” NPT, Brass  
Nipple, 3/4” NPT x 2” Long, Brass  
Elbow, Brass, 90°, 3/4”  
Nipple, 3/4” NPT, Close, Brass  
Coupling, 3/4” FNPT x 3/4” FNPT, Brass  
Adapter, 3/4” Male  
04730-717-02-06  
06685-100-05-00  
06685-011-58-22  
04730-207-46-00  
04730-206-13-00  
04730-207-34-00  
04730-011-87-95  
04730-401-11-01  
05700-011-72-70  
04730-401-07-01  
04730-411-03-01  
9
10  
11  
Tube, Copper, 3/4” x 3-7/16” Long  
Adapter, 1/2” NPT x Male  
Tee, Copper, 3/4” x 3/4” x 1/2”  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
EXTERNAL ELECTRIC BOOSTER OPTION OUTLET PLUMBING  
Elbow, 3/4” Copper to Copper (Female)  
Tube, Copper, 3/4” x 5-7/8” Long  
05700-011-87-96  
04730-406-16-01  
Elbow, 3/4”, 90°, Street, Copper to Copper  
04730-406-40-01  
Tube, Copper, 3/4” x 49-1/2” Long  
05700-031-87-98  
Adapter, 3/4”, Brass  
04730-401-11-01  
Nipple, 3/4” NPT x 2” Long, Brass  
04730-207-46-00  
Elbow, 3/4” Copper to Copper (Female)  
04730-406-16-01  
Tube, Copper, 3/4” x 24” Long  
05700-021-76-53  
Union, 3/4” NPT, Brass  
04730-212-05-00  
Elbow, Brass, 90°, 3/4”  
04730-206-13-00  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
WATER HAMMER ARRESTOR OPTION/WATER PRESSURE REGULATOR KIT OPTION  
WATER HAMMER ARRESTOR OPTION  
Water Arrestor, 1/2” NPT  
06685-100-05-00  
Tee, 3/4” x 3/4” x 1/2”  
04730-211-06-00  
Nipple, 3/4” NPT,  
Close, Brass  
04730-207-34-00  
WATER PRESSURE REGULATOR WITH ARRESTOR KIT OPTION  
Water Arrestor, 1/2” NPT  
06685-100-05-00  
Bushing, 3/4” x 1/2”  
04730-002-01-34  
Regulator, Pressure, 3/4”  
06685-011-58-22  
Tee, Brass, 3/4” x 3/4” x 3/4”  
04730-211-01-34  
Nipple, Close, 3/4”  
04730-207-34-00  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
RINSE SOLENOID VALVE & VACUUM BREAKER REPAIR PARTS KITS  
Screw  
Data Plate  
Cap Screw  
Coil & Housing  
Data Plate  
Valve Bonnet  
Spring  
06401-003-07-40  
Cap  
Spring position is moved  
for clarity.  
Goes below the plunger.  
Plunger  
06401-003-07-40  
O-Ring  
Cap Retainer  
06401-003-07-42  
Diaphragm  
Retainer  
O-Ring  
Plunger  
Body  
Diaphragm  
06401-003-07-42  
Components of  
Repair Kit  
06401-003-06-24  
Screen  
Retainer  
Mesh Screen  
Valve Body  
Complete Vacuum Breaker Assembly, 3/4” NPT  
04820-002-53-77  
Complete 110 Volt Solenoid Valve Assembly, 3/4”  
04810-100-53-00  
DISASSEMBLY - These valves may be taken apart by  
unscrewing the bonnet and the enclosing tube assembly from  
the valve body assembly. After unscrewing, carefully lift off the  
bonnet and enclosing tube assembly. Don’t drop the plunger.  
The o-ring seal and diaphragm cartridge can now be lifted out.  
Be careful not to damage the machined faces while the valve  
is apart.  
Coil & Housing only, 3/4”  
04810-200-01-18  
Possible Problems:  
TO REASSEMBLE - Place the diaphragm cartridge in the  
body with the pilot port extension UP. Hold the plunger with  
the synthetic seat against the pilot port. Make sure the o-ring  
is in place, then lower the bonnet and enclosing tube assem-  
bly over the plunger. Screw the bonnet assembly snugly down  
on the body assembly.  
1. Pilot port extension #1 clogged. Clean hole.  
2. Hole #2 Clogged. Pass heated straight pin through hole.  
2
1
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
WASH TANK COIL ASSEMBLY  
Coil Weldment  
05700-031-88-30  
WASH TANK COIL ASSEMBLY  
(LEFT TO RIGHT) (05700-041-88-31)  
Stand “A” Weldment  
05700-002-74-82  
Stand “C” Weldment  
05700-002-74-84  
Coil Nut  
05310-011-17-85  
Flat Washer  
05700-001-17-87  
SERVICE NOTE: Jackson HIGHLY recom-  
mends that the Coil Gaskets be replaced  
any time the Coil Weldment is replaced or  
removed for an extended period of time.  
Coil Gasket  
05700-001-17-86  
WASH TANK COIL ASSEMBLY  
(RIGHT TO LEFT) (05700-002-81-44)  
Coil Weldment  
05700-031-88-30  
Stand “A” Weldment  
05700-002-74-82  
Stand “a” Weldment  
05700-002-74-82  
Coil Nut  
05310-011-17-85  
Flat Washer  
05700-001-17-87  
Coil Gasket  
05700-001-17-86  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
STEAM INLET PLUMBING ASSEMBLY (LEFT TO RIGHT MODELS)  
1
2
4
5
3
15  
8
14  
9
10  
10  
11  
12  
8
13  
10  
10  
11  
12  
10  
13  
11  
12  
9
12  
9
16  
10  
6
11  
12  
7
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
STEAM INLET PLUMBING ASSEMBLY (LEFT TO RIGHT MODELS) (CONTINUED)  
ITEM  
1
2
3
4
5
6
7
8
QTY  
1
1
1
1
1
1
1
2
4
6
4
5
2
1
1
2
DESCRIPTION  
Valve, 1” Gate, Steam  
Nipple, 1” NPT, Close, Black Iron  
Y-Strainer, 1” NPT, Black Iron  
Reducer, 1” to 3/4”  
Nipple, 3/4” NPT x 6” Long, Black Iron  
Nipple, 3/4” NPT x 17” Long, Black Iron  
Nipple, 3/4” NPT x 26-1/2” Long, Black Iron  
Nipple, 3/4” NPT x 2” Long, Black Iron  
Elbow, 90°, 3/4” NPT, Black Iron  
Elbow, 90°, 3/4” NPT, Street, Black Iron  
Union, 3/4” NPT, Black Iron  
Nipple, Close, 3/4” NPT, Black Iron  
Valve, Solenoid, Steam, 120V, 3/4” NPT  
Nipple, 3/4” NPT x 7” Long, Black Iron  
Tee, 3/4” NPT x 3/4” NPT x 3/4” NPT, Black Iron  
Reducer, 3/4” NPT to 1/2” NPT, Black Iron  
Mfg. No.  
04820-011-87-30  
04730-907-08-34  
04730-217-02-32  
04730-011-95-66  
04730-907-01-34  
05700-002-74-16  
05700-002-74-17  
04730-907-02-34  
04730-906-10-34  
04730-011-87-37  
04730-912-01-00  
04730-907-04-00  
04820-011-87-39  
05700-002-74-15  
04730-002-74-14  
04730-911-02-34  
9
10  
11  
12  
13  
14  
15  
16  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
STEAM INLET PLUMBING ASSEMBLY (RIGHT TO LEFT MODELS)  
10  
9
7
8
11  
12  
15  
16  
6
15  
TOP VIEW  
14  
2
FRONT VIEW  
12  
4
9
11  
3
11  
13  
1
5
11  
9
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
STEAM INLET PLUMBING ASSEMBLY (RIGHT TO LEFT MODELS)(CONTINUED)  
ITEM  
1
2
3
4
5
6
7
8
QTY  
1
1
1
1
1
1
2
6
4
1
4
5
1
1
2
2
DESCRIPTION  
Valve, 1” Gate  
Nipple, 1” NPT, Close, Black Iron  
Y-Strainer, 1” NPT, Black Iron  
Reducer, 1” NPT to 3/4” NPT  
Nipple, 3/4” NPT x 6” Long, Black Iron  
Tee, 3/4” x 3/4” x 3/4”, Black Iron  
Nipple, 3/4” NPT x 4” Long, Black Iron  
Elbow, Street, 3/4” NPT, 90°, Black Iron  
Elbow, 3/4” NPT, 90°, Black Iron  
Nipple, 3/4” NPT x 7” Long, Black Iron  
Union, 3/4” NPT, Black Iron  
Nipple, 3/4” NPT, Close, Black Iron  
Nipple, 3/4” NPT x 17” Long, Black Iron  
Nipple, 3/4” NPT x 26-1/2” Long, Black Iron  
Valve, Solenoid, Steam, 3/4” NPT, 120V  
Reducer, 3/4” NPT to 1/2” NPT  
Mfg. No.  
04820-011-87-30  
04730-907-08-34  
04730-217-02-32  
04730-011-95-66  
04730-907-01-34  
04730-002-74-14  
04730-907-02-34  
04730-011-87-37  
04730-906-10-34  
05700-002-74-15  
04730-912-01-00  
04730-907-01-00  
05700-002-74-16  
05700-002-74-17  
04820-011-87-39  
04730-911-02-34  
9
10  
11  
12  
13  
14  
15  
16  
12  
8
RIGHT SIDE VIEW  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
STEAM OUTLET PLUMBING (LEFT TO RIGHT)  
TOP PLUMBING  
05700-002-81-66  
2
3
7
1
6
4
5
ITEM  
QTY  
DESCRIPTION  
Mfg. No.  
1
2
3
4
5
6
7
8
-
-
-
-
-
-
-
-
Trap, Steam, 3/4” NPT  
Nipple, Close, 3/4” NPT, Black Iron  
Union, 3/4” NPT, Black Iron  
Nipple, 3/4” x 18” Long, Black Iron  
Elbow, 90° Street, 3/4” NPT, Black Iron  
Elbow, 90°, 3/4” NPT, Black Iron  
Reducer, 3/4” NPT to 1/2” NPT Black Iron  
Nipple, 3/4” NPT x 26-1/2” Long, Black Iron  
06680-500-02-77  
04730-907-01-00  
04730-912-01-00  
05700-002-74-10  
04730-011-87-37  
04730-906-10-34  
04730-911-02-34  
04730-911-02-34  
7
BOTTOM PLUMBING  
05700-002-81-65  
2
3
2
1
6
2
6
8
6
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
STEAM OUTLET PLUMBING (RIGHT TO LEFT)  
TOP PLUMBING  
7
2
3
1
4
5
6
ITEM  
QTY  
DESCRIPTION  
Mfg. No.  
1
2
3
4
5
6
7
8
-
-
-
-
-
-
-
-
Steam Trap  
06680-500-02-77  
04730-907-01-00  
04730-912-01-00  
04730-011-87-37  
05700-002-74-08  
04730-906-10-34  
04730-911-02-34  
05700-002-74-10  
Nipple, Close, 3/4”, Black Iron  
Union, 3/4” NPT, Black Iron  
Elbow, Street, 90°, Black Iron  
Nipple, 3/4” NPT x 22” Long, Black Iron  
Elbow, 90°, 3/4” FNPT, Black Iron  
Reducer, 3/4” NPT x 1/2” NPT  
Nipple, 3/4” NPT x 18” Long, Black Iron  
2
BOTTOM PLUMBING  
3
4
1
7
6
8
4
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
AJ-86 GAS COIL ASSEMBLY (CGP MODELS)  
(See “Wash Tank Coil  
Assembly” page)  
(See “Hose Connections” page)  
Connects with:  
3/4” 90° Elbow Brass  
04730-206-13-00  
3/4” Close Brass Nipple  
04730-207-34-00  
Gas Coil Box Cover  
05700-002-48-50  
Coil Box Weldment  
05700-002-50-94  
Other items used but not shown.  
ITEM  
QTY  
DESCRIPTION  
Mfg. No.  
1
2
3
4
5
6
7
1
1
1
1
1
1
1
Thermostat, High Limit  
Gasket  
Terminal Board  
Thermostat Bracket  
Decal, Thermostat Regulating  
Thermostat, Wash Regulating  
Fitting, 1/4”, Imperial Brass  
05930-011-49-43  
05330-200-02-70  
05940-002-78-97  
05700-011-81-64  
09905-011-84-31  
06401-140-00-32  
05310-924-02-05  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
TANK, RINSE BOOSTER (CGP MODELS ONLY)  
1
4
7
6
6
7
8
BOTTOM ANGLED VIEW  
6
2
7
1
TOP ANGLED VIEW  
Mfg. No.  
ITEM  
QTY  
DESCRIPTION  
1
2
3
4
5
6
7
8
2
1
1
1
1
1
3
1
Plumbing Assembly, Inlet/Discharge, Rinse Tank  
Tube, Dispersion Weldment  
Tank, GP Rinse  
Bracket, Upper Rinse Tank  
Bracket, Lower Rinse Tank  
Nipple, 3/4” NPT x 4” Long  
Elbow, 3/4” NPT, 90° Brass  
Nipple, 3/4” NPT x Closed Brass  
05700-002-51-24  
05700-002-46-16  
05700-002-45-05  
05700-002-67-13  
05700-002-67-14  
04730-207-05-00  
04730-206-13-00  
04730-207-34-00  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
RECIRCULATING PUMP ASSEMBLY (CGP MODELS ONLY)  
Elbow, 3/4” 90° Brass  
2 per  
04730-206-13-00  
Pump, Recirculating  
06105-002-05-26  
Pump, Recirculating with Adapters  
05700-002-51-28  
Nipple, 3/4” Close Brass  
2 per  
04730-207-34-00  
Pump, Recirculating Modified  
05700-002-81-22  
Used on AJ-64CGP, AJ-86CGP, AJ-100CGP units right to  
left units and the AJ-64CGP left to right unit.  
Used only on AJ-86CGP left to right units.  
Mounting Bracket  
05700-002-25-74  
Mounting Bracket  
05700-002-23-61  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
HOSE CONNECTIONS (CGP MODELS ONLY)  
D
A
C
A
G
G
B
F
B
Recirculating Pump Assembly  
Gas Coil Weldment  
Rinse Booster Tank  
E
C
D
Rinse Header Plumbing Assembly  
Wash/Fill Plumbing Assembly  
HOSE ASSEMBLIES  
AJ-86CGP (L-R & R-L)  
AJ-100CGP (L-R)  
*Each hose assembly includes 2, 3/4” Pushlock Fittings part number 04730-011-94-00.  
A - Hose, Recirculating Discharge  
B - Hose, Recirculating Pump Suction  
C - Hose, Wash Coil Assembly  
D - Hose, Wash/Fill Supply  
05700-002-52-74  
05700-002-52-75  
05700-002-52-76  
05700-003-03-97  
05700-002-52-76  
05700-002-51-38  
04720-011-94-10 (66”)  
05700-003-03-99  
E - Hose connection to existing gas booster outlet fitting.  
F - Hose connection to existing gas booster inlet fitting.  
G - Hose, Coil Recirculating  
05700-002-17-71  
05700-002-17-71  
Gas Booster Connection Kit 05700-002-51-73 includes:  
18 Feet of 3/4” Hose  
4 - 3/4” Push Lock Fittings  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
AJ-64 DRAIN PLUMBING ASSEMBLY  
11  
1
2
2
10  
7
5
3
9
8
4
NOTE 1  
7
6
4
2
3
1
5
4
3
6
3
4
ITEM  
QTY  
DESCRIPTION  
Mfg. No.  
1
2
1
3
4
4
2
2
2
1
1
1
1
Ball Valve Handle Assembly  
Spacer (Not Shown)  
Tee, Brass, 1-1/2” x 1-1/2” x 1-1/2”  
Adapter, 1-1/2”  
Tube, Copper, 1-1/2” OD x 2” Long  
Connector, No-Hub, 1-1/2”  
Elbow, 1-1/2”, Street, Brass, 90°  
Valve, Ball, 1-1/2” NPT  
Nipple, 1-1/2” NPT, Brass, Close  
Rinse Nipple Weldment  
05700-021-84-74  
05700-002-87-05  
04730-011-69-93  
04730-401-25-01  
05700-011-87-16  
04720-604-06-00  
04730-206-32-00  
04820-111-71-46  
04730-207-40-00  
05700-021-84-61  
04730-011-69-92  
04730-011-87-04  
2
3
4
5
6
7
8
9
10  
11  
Fitting, Barbed, 1-1/2” NPT x 1-1/2”  
Nipple, Brass, 1-1/2” x 3” Long  
NOTE 1: Component is shown for installation in a Right-to-Left model; component is rotated 180 degrees for Left-to-Right  
units.  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
AJ-86 & AJ-100 DRAIN PLUMBING ASSEMBLY (LEFT TO RIGHT MODELS)  
3
15  
15  
4
6
4
4
5
3
7
4
1
3
7
9
8
10  
11  
9
6
9
14 11  
10  
13  
6
2
11  
7
9
3
12  
11  
2
4
12  
4
ITEM  
QTY  
DESCRIPTION  
Mfg. No.  
1
1
Ball Valve Handle  
05700-021-84-74  
05700-002-87-05  
05700-021-83-53  
05700-002-87-05  
04730-011-73-77  
04730-401-25-01  
05700-011-84-22  
05700-002-79-12  
04720-604-06-00  
04820-011-71-46  
05700-021-84-24  
05700-021-88-17  
04730-207-40-00  
04730-206-32-00  
04730-011-69-93  
05700-011-87-16  
04730-011-87-04  
05700-021-84-61  
05700-021-84-29  
05700-021-84-28  
Spacer (Not Shown)  
Ball Valve Handle  
Spacer (Not Shown)  
Elbow, 1-1/2” FNPT, 90° Brass  
Adapter, 1-1/2”  
Tube, Copper, 1-1/2” OD x 4-7/16” Long (AJ-86 Models)  
Tube, Copper, 1-1/2” OD x 5-1/4” Long (AJ-100 Models)  
Connector, No-HUB, 1-1/2”  
Ball Valve, 1-1/2”  
Tube, Copper, 1-1/2” OD x 7-3/4” Long (AJ-86 Models)  
Tube, Copper, 1-1/2” OD x 13-3/4” Long (AJ-100 Models)  
Nipple, 1-1/2” NPT, Brass, Close  
Elbow, 1-1/2” NPT, Brass, Street  
Tee, Brass, 1-1/2” NPT  
Tube, Copper, 1-1/2” OD x 2” Long  
Nipple, Brass, 1-1/2” NPT x 3” Long  
Rinse Nipple Weldment  
Tube, Copper, 1-1/2” OD x 20-1/8” Long (AJ-86 Models)  
Tube, Copper, 1-1/2” OD x 27-1/2” Long (AJ-100 Models)  
2
2
3
4
5
5
10  
2
2
5
3
2
2
5
2
4
4
1
1
2
2
6
7
8
9
10  
11  
12  
13  
14  
15  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
AJ-86 & AJ-100 DRAIN PLUMBING ASSEMBLY (RIGHT TO LEFT MODELS)  
8
10  
7
4
3
4
14  
1
9
6
6
5
7
7
14  
3
12  
3
11  
8
6
1
4
13  
11  
4
8
4
4
7
12  
3
14  
4
15  
2
ITEM  
QTY  
DESCRIPTION  
Mfg. No.  
1
2
Ball Valve Handle Assembly  
Spacer (Not Shown)  
Ball Valve Handle Assembly  
Spacer (Not Shown)  
Elbow, 1-1/2” FNPT, 90°, Brass  
Adapter, 1-1/2” NPT  
Tube, 1-1/2” x 20-1/8” Long (AJ-86 Models)  
Tube, Copper, 1-1/2” x 27-1/2” Long (AJ-100 Models)  
Connector, No Hub, 1-1/2”  
Nipple, 1-1/2” NPT, Brass, Close  
Tee, 1-1/2” NPT x 1-1/2” NPT x 1-1/2” NPT  
Nipple, 1-1/2” NPT x 3 Long, Brass  
05700-021-83-53  
05700-002-87-05  
05700-021-84-74  
05700-002-87-05  
04730-011-73-77  
04730-401-25-01  
05700-021-84-29  
05700-021-84-28  
04720-604-06-00  
04730-207-40-00  
04730-011-69-93  
04730-011-87-04  
05700-021-84-61  
05700-011-87-16  
04730-206-32-00  
05700-021-84-24  
05700-021-88-17  
04820-011-71-46  
05700-011-84-22  
05700-002-79-12  
2
1
3
4
5
5
10  
2
2
5
5
4
1
1
4
2
2
2
3
2
2
6
7
8
9
10  
11  
12  
13  
Rinse Nipple Weldment  
Tube, Copper, 1-1/2” x 2” Long  
Elbow, 1-1/2” NPT, 90°, Brass, Street  
Tube, Copper, 1-1/2” x 7-3/4” Long (AJ-86 Models)  
Tube, Copper, 1-1/2” x 13-3/4” Long (AJ-100 Models)  
Valve, Ball, 1-1/2” NPT  
Tube, Copper, 1-1/2” x 4-7/16” Long (AJ-86 Models)  
Tube, Copper, 1-1/2” x 5-1/4” Long (AJ-100 Models)  
14  
15  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
DRAIN VALVE HANDLE ASSEMBLY/DRAIN QUENCH SYSTEM  
Drain Valve Handle  
Sleeve  
05700-000-01-53  
Drain Quench Assembly  
06401-002-44-07  
Handle Weldment  
05700-021-70-45  
Nipple, 1-1/2” NPT  
04730-207-40-00  
Modified Compression Fitting  
05700-001-16-52  
Lid, Drain Quench  
05700-002-67-16  
Thermostat  
05930-003-13-65  
Solenoid Valve  
04810-100-09-18  
Reducer, 1-1/2” x 1/4”  
04730-002-55-76  
To Dishmachine Drain  
To Cold Water Supply  
Tee, 1-1/2” x 1-1/2” x 1-1/2”  
04730-011-69-93  
Box, Drain Quench  
05700-002-69-96  
Reducer, 1-1/2” to 1/2”  
04730-002-55-75  
Valve, Check, 1/2”  
(Not Shown)  
Nipple, Close, 1/2” NPT  
(Not Shown)  
04820-002-55-77  
04730-207-15-00  
From the existing drain, attach the two additional Tees using the 1-1/2” NPT Close Nipples. Tighten the Reducers into the Tees  
as shown above. Attach the Modified Compression Fitting into the 1-1/2” to 1/4” Reducer. Position the bulb of the thermostat  
so that it rests approximately 1/4” from the bottom of the Tee. Tighten the Modified Compression Fitting as required. Attach to  
the incoming cold water line. Use pipe dope or thread tape as required to prevent any leaks.  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
MOTOR ASSEMBLIES  
Wash Impeller  
05700-031-67-45  
Power Rinse Impeller (AJ-100’s)  
05700-031-67-45  
See Motor  
Chart Below  
Key, 3/16” x 1” Long  
05700-011-89-17  
Pump Plate  
05700-021-71-83  
Prewash Impeller (AJ-86’s & AJ-100’s)  
05700-031-71-78  
Pump Seal  
05330-011-71-98  
Impellar Washer  
05700-011-71-95  
Bolt, 1/4”-20 x 3/4”  
05305-274-04-00  
Cap Screw, 3/8”-16 x 2”  
05305-011-74-98  
Clamp  
(Not Shown)  
WASH MOTOR CHART  
04730-002-32-15  
Volts  
Phase Hz  
Part Number  
208 - 230  
200 - 230  
460  
1
3
3
60  
60  
60  
06105-021-70-57  
06105-121-70-58  
06105-121-70-58  
PREWASH MOTOR CHART  
Model(s)  
AJ-86’s  
Volts  
208  
230  
208  
230  
460  
Phase Hz  
Part Number  
1
1
3
3
3
60  
60  
60  
60  
60  
06105-121-70-55  
06105-121-70-55  
06105-121-70-56  
06105-121-70-56  
06105-121-70-56  
Upper Support Bracket  
05700-021-73-68  
AJ-100’s  
208  
230  
208  
230  
460  
1
1
3
3
3
60  
60  
60  
60  
60  
06105-121-70-57  
06105-121-70-57  
06105-121-70-58  
06105-121-70-58  
06105-121-70-58  
Nut, 1/4”-20 Serrated  
05310-011-66-49  
Lower Support Bracket  
05700-021-73-71  
POWER RINSE MOTOR CHART  
Model(s)  
AJ-100’s  
Volts  
208  
230  
208  
230  
460  
Phase Hz  
Part Number  
1
1
3
3
3
60  
60  
60  
60  
60  
06105-121-70-57  
06105-121-70-57  
06105-121-70-58  
06105-121-70-58  
06105-121-70-58  
Motor Mounting Gasket  
05330-011-71-62  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
PREWASH & WASH PUMP WELDMENT  
Prewash Intake Strainer Weldment  
05700-021-74-96  
Intake Suction Scoop Weldment  
05700-021-87-60  
Prewash Strainer Bracket  
05700-021-74-94  
The pump weldment is secured to the pump plate (through the actual tub wall) using the following fasteners:  
Nut, Hex, 3/8”-16  
Washer, Flat, 3/8”  
Lockwasher, Split, 3/8”  
05310-276-01-00  
05311-176-01-00  
05311-276-01-00  
The power rinse pump weldment is a single part. Separate  
pieces of the weldment are not available for purchase.  
The wash pump weldment is a single part. Separate pieces  
of the weldment are not available for purchase. The weld-  
ment is used for the wash pump in all models covered in this  
manual. The weldment may be ordered using part number  
05700-041-68-88.  
Power Rinse Pump Weldment (AJ-100’s)  
05700-031-81-47  
The prewash pump weldment is a single part. Separate  
pieces of the weldment are not available for purchase.  
The prewash pump weldment is a single part. Separate  
pieces of the weldment are not available for purchase.  
Prewash Pump Weldment  
Prewash Pump Weldment  
AJ-86/AJ-100 Right to Left models: 05700-002-11-96  
AJ-86/AJ-100 Left to Right models: 05700-002-10-62  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
PREWASH & UPPER WASH ARM ASSEMBLIES  
Prewash Tube Weldment  
05700-001-16-89  
Upper Wash Manifold Support Bracket  
05700-021-73-97  
Replacement Kit Note:  
The replacement kit for the end  
cap includes the endcap, lanyard,  
mounting screw and the locknut.  
Complete Prewash Arm Assembly  
05700-021-74-65  
End Cap Replacement Kit  
06401-003-10-19  
Complete Upper Wash Arm Assembly  
05700-031-74-99  
Upper Wash Arm Weldment  
05700-031-67-34  
Replacement Kit Note:  
The replacement kit for the end cap  
includes the endcap, lanyard, mounting  
screw and the locknut.  
End Cap Replacement Kit  
06401-003-10-19  
End Cap  
05700-011-67-11  
Cap, Wash Tube  
05700-021-69-68  
Lanyard  
05340-011-72-46  
SERVICE NOTE: When replacing the 10-32  
screws in the End Caps, it is recommended  
that a thread locking fluid be used to ensure  
that the screws do not back out during nor-  
mal operation.  
Locknut, 10-24 with Nylon Insert  
05310-373-01-00  
Screw, 10-32 x 3/8” Truss Head  
05305-173-12-00  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
LOWER WASH ARM ASSEMBLY  
Lower Wash Arm Support Bracket  
05700-011-71-20  
Secured with Locknut, 1/4”-20 with Nylon Insert  
05310-374-01-00  
Screw, 10-32 x 3/8” Truss Head  
05305-173-12-00  
End Cap  
6 per  
05700-011-67-11  
Lanyard  
6 per  
05340-011-72-46  
Manifold Quick-Release Key  
05700-011-94-45  
Lower Wash Arm Manifold Weldment  
05700-031-67-29  
Locknut, 10-24 with Nylon Insert  
05310-373-01-00  
Complete Lower Wash Arm Assembly  
05700-031-74-66  
SERVICE NOTE: When replacing the 10-32 screws in the End Caps, it is recommended that a thread locking fluid be used to  
ensure that the screws do not back out during normal operation.  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
UPPER & LOWER POWER RINSE ARM ASSEMBLIES  
Complete Upper Power Rinse Arm Assembly  
Screw, 10-32 x 3/8” Long  
05305-173-12-00  
05700-031-91-46  
Locknut, 10-24 with Nylon Insert  
05310-373-01-00  
Lanyard  
05340-011-72-46  
End Cap  
05700-011-87-11  
Upper Wash Manifold  
05700-031-91-48  
SERVICE NOTE: When replacing the  
10-32 screws in the End Caps, it is rec-  
ommended that a thread locking fluid be  
used to ensure that the screws do not  
back out during normal operation.  
Cap, Wash Tube  
05700-021-69-68  
Lanyard  
05340-011-72-46  
Complete Lower Power Rinse Arm Assembly  
05700-031-91-47  
End Cap  
05700-011-67-11  
Manifold Quick Release Key  
05700-011-94-45  
Locknut, 10-24 with Nylon Insert  
05310-373-01-00  
Screw, 10-32 x 3/8” Long  
05305-173-12-00  
Lower Wash Arm Manifold  
05700-031-91-49  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
FINAL RINSE ASSEMBLY  
Gasket  
05330-111-42-81  
End plugs can be ordered using  
part number 04730-209-07-37.  
Rinse Arm  
Support Bracket  
05700-011-71-19  
Upper Rinse Arm Replacement Kit  
06401-003-10-08  
O-Ring  
05330-011-74-55  
Final Rinse Manifold Weldment  
05700-021-74-88  
Retaining Ring (Not Shown)  
05340-112-01-11  
Lower Rinse Arm Replacement Kit  
06401-003-10-09  
Replacement Kit Note:  
The replacement kits for the rinse  
arms have the rinse arms, end caps, o-  
rings and the retaining rings.  
Right Rinse Pan Locator Bracket  
05700-021-92-37  
Rinse Pan Strainer Weldment  
05700-041-85-09  
Locknut, 1/4”-20 with Nylon Insert  
05310-374-01-00  
Rinse Drain Control Plate  
05700-011-68-70  
Rinse Tray Weldment  
(All models except CGP)  
05700-031-66-75  
Left Rinse Pan Locator Bracket  
05700-021-92-38  
Optional Parts for CGP  
Rinse Drain Control Plate  
05700-011-68-70  
Models  
Rinse Drain Overflow Plate  
05700-002-53-62  
Rinse Tray Weldment  
(CGP models only)  
05700-031-66-75  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
DRIVE ASSEMBLY  
6
5
10  
7
1
8
2
9
3
11  
14  
4
15  
12  
See Detail A  
13  
16  
18  
17  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
DRIVE ASSEMBLY (CONTINUED)  
ITEM  
QTY  
DESCRIPTION  
Mfg. No.  
1
1
Drive Plate and Rod Weldment  
Replacement Kit with Expansion Legs  
Replacement Kit with Expansion Legs/Adjuster Crank  
Adjuster Crank Assembly  
Skotch Yoke Weldment Replacement Kit  
Coupling & Expansion Leg Weldment  
Pawl Bar Drive Linkage Casting  
Spacer Plate  
Pillow Block Replacment Kit  
Shaft Collar  
Drive Socket  
Drive Plate  
Pillow Block  
Drive Spring  
Shaft Collar  
Drive Motor Mounting Bracket  
Adjuster Spring  
Adjusting Handle Weldment  
Drive Motor Replacement Kits  
Drive Motor (208-230 Volt, 60 Hz, Single Phase Models)  
Drive Motor (208-230 Volt, 60 Hz, Three Phase Models)  
Gear Drive  
05700-021-67-44  
06401-021-86-80  
06401-011-94-54  
05700-021-69-95  
06401-003-08-48  
05700-021-67-50  
09515-021-87-73  
05700-011-67-58  
06401-003-08-50  
05700-011-89-18  
05700-021-67-39  
05700-021-67-42  
03120-021-71-87  
05315-011-83-51  
05700-011-89-18  
05700-031-73-56  
05315-011-71-90  
05700-021-72-28  
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
1
1
2
1
1
2
2
1
1
2
1
2
1
1
1
1
1
06401-003-08-42  
06401-003-08-40  
06105-011-71-88  
03120-011-71-81  
05700-011-67-97  
18  
19  
20  
1
1
1
Roller Bearing  
Drive Hub  
Front Drive Motor Cover  
Rear Drive Motor Cover  
Replacement Kit  
06401-003-11-64  
Replacment Kit  
06401-003-10-18  
20  
19  
Replacement Kits Notes:  
The replacement kits for the drive motor covers come  
with the weldments and the mounting hardware.  
Detail A  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
DOOR ASSEMBLIES  
Left Door Guide Weldment  
05700-002-32-51  
Screw, 8-32 x 1/4” Long  
05305-172-09-00  
Right Door Guide Weldment  
05700-031-76-44  
Door Switch Magnet  
05700-111-51-68  
Door Catch Weldment  
05700-031-84-80  
1
Locknut, 1/4”-20 with Nylon Insert  
05310-374-01-00  
Door Glide  
2
05700-111-70-92  
Door Stop  
05700-002-05-46  
Wash Door Handle Weldment  
05700-011-82-63  
Wash Door Hood Support: 05700-031-84-13  
Prewash Door Hood Support: 05700-031-84-14  
Prewash Door Handle Weldment  
05700-011-80-45  
ITEM  
QTY  
DESCRIPTION  
Mfg. No.  
1
1
2
2
2
2
1
1
1
1
1
1
Wash Door Weldment  
Wash Door Weldment (No Emboss)  
05700-031-83-39  
05700-003-13-53  
05700-031-95-05  
05700-031-95-07  
05700-003-13-42  
05700-003-13-40  
05700-031-83-43  
05700-031-83-57  
Prewash Door Weldment (Left to Right Model)  
Prewash Door Weldment (Right to Left Model)  
Prewash Door Weldment - No Emboss (Left to Right Model)  
Prewash Door Weldment - No Emboss (Right to Left Model)  
Wash Door Stiffener (Not Shown)  
Prewash Door Stiffener (Not Shown)  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
PAWL BAR MISCELLANEOUS COMPONENTS  
Pawl Bar Roller Replacement Kit  
06401-003-11-80  
Replacement Kit Notes:  
The replacement kit for the pawl bar roller comes with the roller, roller  
shaft, hardware and locknut as shown.  
Pawl Bar Bracket (with studs) Weldment  
05700-031-84-68  
Pawl Bar Bracket (without tabs) Weldment  
05700-031-92-36  
Replacement Kits Notes:  
The pawl bar gutter weldment  
replacement kit contains the weld-  
ment, a gasket and the mounting  
hardware. The guide block kit con-  
tains both blocks and a gasket.  
Pawl Bar Gutter Weldment Replacement Kit  
06401-003-09-95  
Pawl Bar Gutter Gasket  
05330-011-68-55  
Guide Block Replacment Kit  
06401-003-10-15  
Top Guide Block  
Bottom Guide Block  
Service Note: It is highly recommended that when  
changing out one guide block, that the other be changed  
out as well, along with the gasket.  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
PAWL BAR ASSEMBLIES  
PAWL BAR ASSEMBLY, LEFT TO RIGHT OPERATION  
09515-021-69-00  
Pawl Bar Dog Casting  
Pawl Bar Weldment  
(See below)  
PAWL BAR ASSEMBLY, RIGHT TO LEFT OPERATION  
09515-021-69-00  
Pawl Bar Dog Casting  
Pawl Bar Weldment  
(See below)  
PAWL BAR ASSEMBLIES:  
Model  
Left to Right  
Right to Left  
Pawl Bar Weldment  
Pawl Bar  
Dogs Complete Assembly  
Pawl Bar Weldment  
05700-031-81-03  
05700-041-83-67  
N/A  
Prison Package  
06401-231-81-02  
06401-331-83-75  
AJ-64  
AJ-86  
05700-031-81-03  
05700-002-81-34  
05700-003-13-63  
18  
24  
24  
06401-131-81-02  
06401-131-83-75 (L-R)  
06401-231-83-75 (R-L)  
N/A (L-R)  
AJ-86  
N/A  
N/A  
With Side Loader  
05700-003-13-64 (R-L)  
AJ-100  
05700-041-91-13  
05700-041-91-13  
28  
06401-141-91-05  
06401-241-91-05  
PAWL BAR WELDMENT  
AJ-86 RIGHT TO LEFT WITH A SIDE LOADER  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
RACK RAIL ASSEMBLIES  
POWER  
RINSE  
START  
PREWASH  
FINAL  
RINSE  
WASH  
RAIL  
WELDMENT  
Left to Right Assembly (AJ-86  
Model shown for reference)  
FINAL  
RINSE  
POWER  
RINSE  
WASH  
START  
PREWASH  
Right to Left Assembly (AJ-86  
Model shown for reference)  
RAIL  
WELDMENT  
LEFT TO RIGHT:  
COMPONENT  
AJ-64 MODELS  
AJ-86 MODELS  
AJ-100 MODELS  
Start Actuator  
Prewash Actuator  
Wash Actuator  
Power Rinse Actuator  
Final Rinse Actuator  
Rail Weldment  
05700-021-72-39  
Not Applicable  
05700-021-72-39  
05700-021-75-68  
05700-021-72-39  
05700-021-72-39  
05700-021-76-96  
05700-031-83-96  
05700-041-82-15  
05700-041-83-72  
05700-021-72-39  
05700-021-75-68  
05700-021-72-39  
05700-021-72-39  
05700-021-76-96  
05700-041-94-91  
05700-041-89-97  
05700-041-94-90  
05700-021-72-39  
05700-021-72-39  
05700-021-75-68  
05700-002-74-57  
05700-041-82-78  
05700-002-74-55  
Opposite Rail  
Complete Assembly  
RIGHT TO LEFT:  
COMPONENT  
AJ-64 MODELS  
AJ-86 MODELS  
AJ-100 MODELS  
Start Actuator  
Prewash Actuator  
Wash Actuator  
Power Rinse Actuator  
Final Rinse Actuator  
Rail Weldment  
05700-021-72-39  
Not Applicable  
05700-021-72-39  
05700-021-76-96  
05700-021-72-39  
05700-021-72-39  
05700-021-75-68  
05700-041-91-21  
05700-041-82-14  
05700-041-91-20  
05700-021-72-39  
05700-021-76-96  
05700-021-72-39  
05700-021-72-39  
05700-021-75-68  
05700-041-91-03  
05700-041-89-97  
05700-041-91-04  
05700-021-72-39  
05700-021-72-39  
05700-021-76-96  
05700-002-74-58  
05700-041-80-56  
05700-002-74-56  
Opposite Rail  
Complete Assembly  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
MISCELLANEOUS PARTS AND WELDMENTS  
Plate, Left Water  
Directional  
05700-021-79-27  
Plate, Right Water  
Directional  
05700-021-79-23  
Splash Shield Weldment  
05700-031-85-16  
Run Off Sheet Weldment  
05700-021-71-39  
Replacment Kit Note:  
The kit for the hole direction plate comes  
with the plate, a new gasket and the  
mounting hardware.  
Hole Direction Plate Replacment Kit  
06401-003-10-00  
Pipe Clamp  
05700-000-35-05  
Rinse Drain Plate Replacment  
Kit  
Rinse Drain Plug Replacement Kit  
06401-003-10-06  
(CGP Models Only)  
06401-003-10-07  
Rinse Drain Weldment Replacement Kit  
06401-003-10-05  
Replacement Kits Notes:  
The kits for the drain weldments and  
drain  
plugs  
come  
with  
the  
weldments/parts, a new gasket and the  
mounting hardware.  
Rinse Drain Plate Gasket  
05330-011-72-27  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
MANIFOLDS/STRAINER SUPPORT WELDMENTS  
Secured to the Hood Weldment with:  
Washer, Flat, S/S, 1/4” ID  
05311-174-01-00  
Locknut, 1/4”-20 with Nylon Insert  
05310-374-01-00  
Prewash Manifold Weldment  
AJ-86 Models Only  
05700-031-69-70  
Wash Manifold Weldment  
05700-031-71-13  
Prewash Manifold Weldment  
AJ-100 Models Only  
05700-002-24-94  
Wash Fill Tube Weldment  
05700-021-71-21  
Vellumoid Gasket  
05330-111-42-81  
Prewash Fill Tube Weldment  
(AJ-86 & AJ-100 Models Only)  
05700-021-74-76  
Secured with Locknut, 1/4”-20 with Nylon Insert  
05310-374-01-00  
Wash Strainer Separator Weldment  
05700-031-84-38  
Shoulder Bolt Wingnut Weldment  
05700-002-46-02  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
STRAINERS  
Front Strainer Weldment  
05700-021-85-10  
Back Strainer Weldment  
05700-021-85-11  
Overflow Strainer Support  
05700-001-96-48  
Drain Guard  
Strainer Weldment  
05700-002-09-15  
Wash Intake Strainer Weldment (CGP Models)  
05700-002-51-52  
Tub Strainer Weldment (CGP Models)  
05700-002-03-21  
Screen Strainer  
with Handle Weldment  
05700-002-09-04  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
FLOAT SWITCH COMPONENTS/SCRAP BASKETS  
Wash Tank Float Switch Replacment Kit  
06401-003-11-75  
Prewash Tank Float Switch Replacment Kit  
06401-003-11-76  
Float Switch Support Bracket  
Replacement Kit  
06401-003-11-77  
Replacment Kit Note:  
The float switch support bracket replace-  
ment kit contains the bracket and asso-  
ciated hardware for mounting.  
Replacment Kit Note:  
The float switch replacement kits contain the float switch with  
associated terminals, the flat washer and the nut.  
Service Agent Note:  
Remember than when reinstalling the float switch that the flat  
washer goes inside against the tub wall while the nut is on the  
outside of the tub.  
Float Switch Cover  
05700-021-75-71  
Scrap Basket Lid  
Weldment  
05700-002-56-55  
Scrap Basket Assembly  
06401-011-87-78  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
CURTAINS/TUB MAGNETS  
Curtain, 12” Long x 20-1/2” Wide  
08415-131-73-44  
Curtain, 21” Long x 20-1/2” Wide  
08415-131-73-45  
Curtain, 24 1/2” Long x 20-1/2” Wide  
CGP MODELS ONLY  
Short Curtain Decal  
09905-011-73-82  
08415-002-47-37  
Long Curtain Decal  
09905-011-73-84  
Curtain Hook  
05700-011-83-54  
Extra Long Curtain Decal  
CGP MODELS ONLY  
09905-002-52-69  
Middle Curtain Hook  
05700-011-72-65  
Curtain Rod  
05700-021-73-43  
Conveyor Switch Replacement Kit  
06401-003-11-79  
Replacement Kit Note:  
The conveyor switch replacement kit  
comes with the switch, a terminal and  
a wire nut.  
Limit Switch Bracket  
05700-021-71-18  
Service Note:  
The cord for the conveyor switch needs to be cut to length in the field  
and have the pink terminal applied there.  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
VENT COWL ASSEMBLY/VENT SCOOP OPTION  
Gasket, Top Vent Cowl  
05330-031-83-47  
Vent Cowl Cover Replacement Kit  
06401-003-10-16  
Gasket, Side Vent Cowl  
05330-031-83-48  
Vent Cowl Replacement Kit  
06401-003-11-62  
Replacement Kit Note:  
The kit for the vent cowl comes with the vent  
cowl weldment, new gaskets and the lock-  
nuts needed to mount it.  
VENT SCOOP OPTION  
Vent Scoop Assembly  
05700-002-04-08  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
EXHAUST FAN CONTROL/TABLE LIMIT SWITCH OPTIONS  
2” Din Rail  
05700-002-36-09  
Terminal Board  
05940-011-84-41  
FAN LOAD ON TIMER OUTPUT  
5A, 1/4HP, 240 V AC MAX  
Kit, Exhaust Fan - Electric & Steam Models  
05700-031-90-53  
Decal, Fan Load  
09905-003-32-20  
Kit, Exhaust Fan - Gas Models  
05700-003-14-59  
Delay Timer  
05945-011-65-44  
Striker Plate Limit Switch  
Assembly  
05700-002-62-94  
Limit Switch  
05930-002-62-81  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: 09-29-2007  
104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
SIDE LOADER TRACK ASSEMBLY/LEG REPLACEMENTS/STRAINER  
Side loader track assembly  
(left to right model shown).  
2
4
5
3
1
6
ITEM  
1
QTY  
1
1
1
1
1
2
1
1
DESCRIPTION  
Mfg. No.  
Track Weldment (Left to Right) 24”  
Track Weldment (Right to Left) 24”  
Track Weldment (Left to Right) 30”  
Track Weldment (Right to Left) 30”  
Actuator Switch Replacement Kit  
Spacer  
Leg Socket Replacement Kit  
Leg Support Replacement Kit  
Bullet Foot  
05700-031-78-98  
05700-031-95-20  
05700-003-04-57  
05700-003-04-58  
06401-003-10-64  
05700-011-71-44  
06401-003-09-79  
06401-003-09-80  
05340-108-01-03  
2
3
4
5
6
1
Replacement Kits Notes:  
The actuator switch replacement kit comes with the  
actuator weldment, mounting hardware and (2)  
spacers.  
The leg socket replacement kit has the leg socket,  
mounting hardware and set screw.  
Front Strainer Weldment  
05700-021-85-10  
The leg support replacement kit has the leg and the  
bullet foot included.  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
SIDE LOADER PAWL BAR ASSEMBLIES/PAWL BAR BRACKET/MAGNET  
Replacement Kit Note:  
The kits for the pawl bars come with the bar  
weldment, (3) dogs and the hardware.  
Pawl Dog Wing Weldment  
05700-021-86-79  
Pawl Bar Spacer  
05700-011-71-45  
Kit, Pawl Bar Replacement: 06401-131-86-90  
Kit, 30” Pawl Bar Replacement: 06401-231-86-90  
Drive Linkage Replacment Kit (L-R)  
06401-003-11-59  
Replacement Kit Note:  
The replacement kits for the drive linkages come also  
with the hardware for mounting them to the pawl bars.  
Drive Linkage Replacement (R-L)  
06401-003-11-60  
Replacement Kit Note:  
The conveyor switch replacement  
kit comes with the switch, a termi-  
nal and a wire nut.  
See page entitled “Pawl Bar  
Miscellaneous Components”  
for other parts used on the  
Side Loader.  
Service Note:  
The cord for the conveyor switch needs to  
be cut to length in the field and have the  
pink terminal applied there.  
Pawl Bar Roller Bracket  
05700-031-77-94  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
SIDE LOADER VENT COWL OPTION  
Vent Cowl Replacement Kit (Left to Right)  
06401-003-11-81  
Vent Cowl Replacement Kit (Right to Left)  
06401-003-11-83  
Service Note:  
One of the side  
gaskets that come  
in the kit will need  
to be cut to length  
in order to fit prop-  
erly on the unit  
when replaced.  
Replacement Kit Note:  
The replacement kit(s) for the vent cowls come with the  
cowls, the gaskets and mounting hardware.  
Vent Cowl Gasket, Top: 05330-031-83-47  
Vent Cowl Gasket, Side: 05330-031-83-48  
STANDARD ASSEMBLY  
Vent Cowl Cover Replacement Kit  
VENT SCOOP OPTION  
Vent Scoop Assembly  
05700-002-04-08  
06401-003-10-16  
Vent Cowl Assembly for  
Hooded Side Loader Option  
05700-003-15-66  
Replacement Kit Note:  
The cover kit contains the  
cover and the hardware for  
mounting it.  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
D226 STEAM BOOSTER CONTROL BOX ASSEMBLY  
Decal, Warning, Disconnect Power  
09905-100-75-93  
Decal, Schematic, D226 Booster (on the  
inside of the control box cover)  
09905-002-78-56  
Control Box Cover  
Replacement Kit  
06401-003-11-63  
Replacement Kit Note:  
The kit for the terminal block  
replacement includes the block,  
the spacer and the locknut.  
Replacement Kit Note:  
Terminal Block Replacement Kit  
06401-003-11-78  
The kit for the control box cover  
comes with the decals and the  
screws for securing the cover.  
Decal, L1-L2  
09905-002-78-67  
Decal, Ground  
09905-011-86-86  
Ground Lug  
05940-200-76-00  
Thermostat  
06680-500-01-77  
Spacer, Terminal Block  
Light, Red  
05945-111-21-57  
Conduit Fitting, .231” x.394”  
05975-011-49-03  
Control Box with Decal  
06401-002-78-87  
Power Switch  
05930-011-49-55  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
108  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
D226 STEAM BOOSTER PLUMBING ASSEMBLY  
8
1
2
3
4
5
6
32  
10  
18  
17  
12  
14  
29  
15  
25  
9
20  
16  
19  
24  
23  
13  
7
31 30  
33  
22  
31  
28  
27  
21  
11  
26  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
D226 STEAM BOOSTER PLUMBING ASSEMBLY (CONTINUED)  
ITEM  
1
2
3
4
5
6
7
8
QTY  
1
2
2
1
1
1
1
2
6
2
2
4
1
1
2
1
2
2
1
3
2
1
1
1
1
1
1
1
1
1
1
1
2
2
2
DESCRIPTION  
Mfg. No.  
Water Pressure Regulator, 3/4”  
Nipple, Brass, 3/4” NPT x 6” Long  
U-Bolt, 6”, 5/8”-11 Thread  
Platform Weldment  
Heat Exchanger  
Steam Trap, 3/4”  
Bushing, 2” NPT x 3/4” NPT, Black Iron  
Elbow, 3/4” NPT, Brass  
Nipple, 1” NPT, Close, Black Iron  
Union, 3/4” NPT, Brass  
Bushing, 2” NPT x 3/4” NPT, Brass  
Nipple, 3/4” NPT x 1-3/8” Long  
Bushing, Hex 3/4” M x 1/2” F, Brass  
Y-Strainer, 1” NPT, Black Iron  
Pressure Gauge  
04820-100-01-06  
05700-001-26-74  
05306-458-01-04  
05700-002-78-02  
04420-100-01-05  
06680-500-02-77  
04730-902-06-34  
04730-206-13-00  
04730-907-08-34  
04730-212-05-00  
04730-202-18-00  
04730-207-34-00  
04730-002-56-27  
04730-217-02-32  
06685-111-88-34  
04820-100-07-06  
04730-207-05-00  
04730-211-01-34  
04730-002-94-51  
04730-906-03-34  
04730-907-09-34  
04730-011-87-37  
04730-907-14-34  
04730-904-01-34  
04820-100-29-34  
04820-002-93-66  
04820-002-90-26  
04730-211-04-00  
04810-011-72-67  
04730-911-01-34  
04820-100-01-35  
04730-911-01-00  
04730-912-01-00  
04730-207-46-00  
04730-907-01-00  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
25  
25  
26  
27  
28  
29  
30  
31  
32  
33  
Steam Relief Valve  
Nipple, 3/4” NPT x 4” Long, Brass  
Tee, 3/4” NPT x 3/4” NPT x 3/4” NPT, Brass  
Bushing, 2” NPT x 1” NPT, Black Iron  
Elbow, 90°, 1” NPT, Black Iron  
Nipple, 1” NPT x 4” Long, Black Iron  
Elbow, 90°, Street, 3/4” NPT, Black Iron  
Nipple, Pigtail, 1/4” NPT  
Coupling, 1/4” NPT x 1/4” NPT  
Steam Solenoid Valve, 240VA  
Steam Solenoid Valve, 200VA  
Steam Solenoid Valve (ASCO)  
Tee, 3/4” NPT x 3/4” NPT x 1/4” NPT, Brass  
Valve, Test Cock, 1/4” NPT  
Tee, 1” NPT x 1” NPT x 1” NPT, Black Iron  
Valve, Safety Relief 1” NPT  
Tee, 1” NPT x 1” NPT x 1/4” NPT, Black Iron  
Union, 3/4” NPT, Black Iron  
Nipple, 3/4” NPT x 2” Long, Brass  
Nipple, 3/4” NPT, Close, Black Iron  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
GO*BOX COMPONENTS  
A GO*BOX is a kit of the most needed parts for a particular model or model familly to successfully effect a repair in the first  
call 90% or more of the time.  
The following components may be ordered together using part number 06401-002-14-99.  
QTY  
1
1
1
2
1
1
1
6
2
2
2
1
1
1
1
1
4
1
2
2
2
1
1
1
2
2
1
1
DESCRIPTION  
Drive Motor Contactor  
Mfg. No.  
05945-111-68-38  
05945-002-24-70  
05945-111-68-37  
05700-011-35-92  
06680-121-70-71  
05330-011-68-55  
06685-111-88-34  
05700-111-70-92  
05930-111-51-68  
05330-400-12-08  
05330-011-74-56  
05945-111-68-39  
05945-111-68-40  
05945-111-72-51  
05945-111-35-19  
04820-001-60-57  
05700-011-68-16  
05330-011-71-98  
04810-100-53-00  
05930-011-49-55  
05930-111-68-44  
05930-111-68-86  
06685-111-68-48  
06685-111-68-49  
05930-121-71-36  
05930-121-67-72  
05950-011-68-35  
04820-111-71-46  
Contactor, Wash Heater, 3 ph, 3 pole  
Contactor, Wash Heater, 1 ph, 4 pole  
Final Rinse Arm End Cap  
Float Switch, Dual, Wash & Prewash  
Gasket, Pawl Bar Gutter  
Gauge, Pressure  
Glide, Door Edge  
Magnet, Door Reed Switch  
O Ring, Prewash Manifold  
O Ring, Wash Manifold  
Overload, Drive Motor  
Overload, Wash Motor  
Relay,120v, 3 PDT  
Relay,120v,50/60Hz 3A Control  
Repair Kit, 3/4" Vacuum Breaker  
Roller, Pawl Bar  
Seal Kit for Wash and Prewash pump  
Solenoid Valve, Fill & Rinse  
Switch, Power  
Switch, Reed, Actuator (NC)  
Switch, Reed, Door (NO)  
Thermometer, 48" Capillary  
Thermometer, 96" Capillary  
Thermostat, Wash High Limit  
Thermostat, Wash Regulating  
Transformer,150VA  
Valve, Ball 1 1/2" NPT  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 5: PARTS SECTION  
RINSE FILL MOTOR OPTION  
5
10  
9
3
1
2
4
12  
6
7
8
11  
ITEM  
QTY  
1
1
1
1
1
1
1
1
1
4
4
4
DESCRIPTION  
Rinse Fill Motor Assembly  
Motor  
Mfg. No.  
05700-002-40-25  
06105-002-72-71  
05700-002-63-59  
04730-011-34-90  
04730-002-73-62  
04730-011-65-14  
04730-002-11-99  
04730-002-12-00  
04730-002-12-55  
05311-274-01-00  
05305-274-02-00  
05310-274-01-00  
05700-002-38-90  
1
2
3
4
5
6
7
8
Bracket, Pump Mounting  
Clamp, Hose 5 5/8” to 6”  
Reducer Bushing, 1 1/4” to 1”  
Reducer Bushing 1” to 3/4”  
Elbow, 90 Deg., 1” Street  
Nipple, 1” NPT x 6” Long Brass  
Elbow, 90 Deg. Brass Female  
Lockwasher, 1/4”  
9
10  
11  
12  
Bolt, 1/4”-20 x 1/2” Long  
Nut, Hex S/S 1/4”-20  
Rinse Motor Mounting Bracket  
1
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
112  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6:  
ELECTRICAL SCHEMATICS  
113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-64CE (208-230 VOLT, 60 HZ, SINGLE PHASE) PRIMARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
114  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-64CE (208-230 VOLT, 60 HZ, SINGLE PHASE) SECONDARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-64CE (208-230 VOLT, 60 HZ, THREE PHASE) PRIMARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
116  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-64CE (208-230 VOLT, 60 HZ, THREE PHASE) SECONDARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-64CE (460 VOLT, 60 HZ, THREE PHASE) PRIMARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
118  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-64CE (460 VOLT, 60 HZ, THREE PHASE) SECONDARY SIDE  
09905-031-95-56  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-64CS (208-230 VOLT, 60 HZ, SINGLE PHASE) PRIMARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
120  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-64CS (208-230 VOLT, 60 HZ, SINGLE PHASE) SECONDARY SIDE  
9905-002-55-96a  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
121  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-64CS (208-230 VOLT, 60 HZ, THREE PHASE) PRIMARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
122  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-64CS (208-230 VOLT, 60 HZ, THREE PHASE) SECONDARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
123  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-64CS (460 VOLT, 60 HZ, THREE PHASE) PRIMARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
124  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-64CS (460 VOLT, 60 HZ, THREE PHASE) SECONDARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
125  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CE & AJ-100CE (208-230 VOLT, 60 HZ, SINGLE PHASE) PRIMARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
126  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CE & AJ-100CE (208-230 VOLT, 60 HZ, SINGLE PHASE) SECONDARY SIDE  
09905-031-80-35  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
127  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CE & AJ-100CE (208-230 VOLT, 60 HZ, THREE PHASE) PRIMARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
128  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CE & AJ-100CE (208-230 VOLT, 60 HZ, THREE PHASE) SECONDARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
129  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CE & AJ-100CE (460 VOLT, 60 HZ, THREE PHASE) PRIMARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
130  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CE & AJ-100CE (460 VOLT, 60 HZ, THREE PHASE) SECONDARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
131  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CS & AJ-100CS (208-230 VOLT, 60 HZ, SINGLE PHASE) PRIMARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
132  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CS & AJ-100CS (208-230 VOLT, 60 HZ, SINGLE PHASE) SECONDARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
133  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CS & AJ-100CS (208-230 VOLT, 60 HZ, THREE PHASE) PRIMARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
134  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CS & AJ-100CS (208-230 VOLT, 60 HZ, THREE PHASE) SECONDARY SIDE  
09905-002-46-98  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
135  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CS & AJ-100CS (460 VOLT, 60 HZ, THREE PHASE) PRIMARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
136  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CS & AJ-100CS (460 VOLT, 60 HZ, THREE PHASE) SECONDARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
137  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CGP & AJ-100CGP (208-230 VOLTS, 60 HZ, SINGLE PHASE) PRIMARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
138  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CGP & AJ-100CGP (208-230 VOLTS, 60 HZ, SINGLE PHASE) SECONDARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
139  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CGP & AJ-100CGP (208-230 VOLTS, 60 HZ, THREE PHASE) PRIMARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
140  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CGP & AJ-100CGP (208-230 VOLTS, 60 HZ, THREE PHASE) SECONDARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
141  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CGP & AJ-100CGP (460 VOLTS, 60 HZ, THREE PHASE) PRIMARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
142  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
AJ-86CGP & AJ-100CGP (460 VOLTS, 60 HZ, THREE PHASE) SECONDARY SIDE  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
143  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
CONVEYOR EXHAUST FAN HOOKUP  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
144  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 6: ELECTRICAL SCHEMATICS  
D226 STEAM BOOSTER/DRAIN QUENCH SYSTEM/SIDE LOADER  
GND L1  
L2  
D226/J120 STEAM BOOSTER OPTION  
120/200/208/230 VOLT - 60 HZ - 1PH  
S1  
S1  
ON  
ON  
OFF  
OFF  
E1  
E2  
TS1  
TS1: THERMOSTAT  
FS1: SOLENOID COIL  
S1: POWER SWITCH  
E1: POWER LIGHT  
E2: SOLENOID LIGHT  
FS1  
09905-002-78-56 D  
Drain Quench System  
64” CONVEYORS  
86” & 100” CONVEYORS  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
145  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 7:  
JACKSON MAINTENANCE  
& REPAIR CENTERS  
146  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS  
ALABAMA TO FLORIDA  
ALABAMA  
CALIFORNIA  
P & D APPLIANCE  
4220-C ROSEVILLE ROAD  
NORTH HIGHLANDS, CA  
95660  
GCS SERVICE INC.  
PHILADELPHIA, PA  
(215)925-6217  
JONES-McLEOD APPLIANCE  
SVC  
BARKERS FOOD MACHINERY  
SERVICES  
800-441-9115  
1616 7TH AVE. NORTH  
BIRMINGHAM, AL 35203  
(205) 251-0159  
800-821-1150  
FAX: (205) 322-1440  
service@jones-mcleod.com  
5367 SECOND STREET  
IRWINDALE, CA 91706  
(626) 960-9390  
800-258-6999  
FAX: (626) 337-4541  
service@barkers.com  
(916) 974-2772  
800-824-7219  
FAX:(916) 974-2774  
FAX: (215) 925-6208  
ELMER SCHULTZ SERVICE  
36 BELMONT AVE.  
WILLMINGTON, DE 19804  
(302) 655-8900  
COMMERCIAL APPLIANCE  
SERVICE, INC.  
281 LATHROP WAY, #100  
SACRAMENTO, CA 95815  
(916) 567-0203  
(800) 464-2222  
(916) 567-0324 FAX  
800-225-0599  
FAX: (302) 656-3673  
elmer2@erols.com  
JONES-McLEOD APPLIANCE  
SVC  
854 LAKESIDE DRIVE  
MOBILE, AL 36693  
(251) 666-7278  
GCS SERVICE INC.  
LOS ANGELES, CA  
(213) 683-2090  
800-327-1433  
FAX: (213) 683-2099  
EMR SERVICE DIVISION  
106 WILLIAMSPORT CIRCLE  
SALISBURY, MD 21804  
(410) 543-8197  
800-237-9859  
FAX: (251) 661-0223  
COLORADO  
GCS SERVICE INC.  
SANTA ANA, CA  
(714) 542-1798  
GCS SERVICE INC.  
SHERIDAN, CO  
(303) 371-9054  
FAX: (410) 548-4038  
ALASKA  
800-540-0719  
FLORIDA  
RESTAURANT APPLIANCE  
SERVICE  
7219 ROOSEVELT WAY NE  
SEATTLE, WA 98115  
(206) 524-8200  
800-433-9390  
FAX: (206) 525-2890  
info@restappl.com  
FAX: (714) 542-4787  
800-972-5314  
FAX: (303) 371-4754  
COMMERCIAL APPLIANCE  
SERVICE  
8416 LAUREL FAIR CIRCLE  
BLDG 6, SUITE 114  
TAMPA, FL 33610  
(813) 663-0313  
GCS SERVICE INC.  
S. SAN FRANCISCO, CA  
(650) 635-0720  
800-969-4427  
FAX: (650) 871-4019  
HAWKINS COMMERCIAL  
APPLIANCE SERVICE  
3000 S. WYANDOT ST.  
ENGLEWOOD, CO 80110  
(303) 781-5548  
800-282-4718  
COMMERCIAL APPLIANCE  
SERVICE, INC.  
6507 PACIFIC AVENUE, SUITE  
102  
STOCKTON, CA 95207  
(916) 567-0203  
(800) 464-2222  
(800) 624-2117  
FAX: (303) 761-5561  
johns@hawkinscommercial.com  
FAX: (813) 663-0212  
commercialappliance@world-  
net.att.net  
ARIZONA  
AUTHORIZED COMMERCIAL  
FOOD EQMT. SVC  
4832 SOUTH 35TH STREET  
PHOENIX, AZ 85040  
(602) 234-2443  
METRO APPLIANCE SERVICE  
1640 S BROADWAY  
DENVER, CO 80210  
(303) 778-1126  
GCS SERVICE INC  
MIAMI, FL  
(305) 621-6666  
800-766-8966  
(916) 567-0266 FAX  
800-824-8875  
800-525-3532  
FAX: (305) 621-6656  
FAX: (602) 232-5862  
acsboss@aol.com  
GCS SERVICE INC.  
SAN DIEGO, CA  
(858) 549-8411  
FAX: (303) 778-0268  
metroappls@aol.com  
GCS SERVICE INC  
ORLANDO, FL  
GCS SERVICE INC.  
PHOENIX, AZ  
800-422-7278  
FAX: (858) 549-2323  
CONNECTICUT  
(407) 841-2551  
800-338-7322  
(602) 474-4510  
800-510-3497  
FAX: (602) 470-4511  
GCS SERVICE INC.  
HARTFORD, CT  
(860) 549-5575  
800-423-1562  
FAX: (860) 527-6355  
FAX: (407) 423-8425  
INDUSTRIAL ELECTRIC SVC.  
5662 ENGINEER DRIVE  
HUNTINGTON BEACH, CA  
92649  
NASS PARTS AND SERVICE,  
INC.  
1144 BELVILLE ROAD, UNIT  
359  
ARKANSAS  
(714) 379-7100  
BROMLEY PARTS & SVC  
10TH AND RINGO  
(800-457-3783  
FAX: (714) 379-7109  
SUPERIOR KITCHEN SER-  
VICE INC.  
DAYTONA BEACH, FL 32114  
(386) 226-2642  
P.O. BOX 1688  
LITTLE ROCK, AR 72202  
(501) 374-0281  
22 THOMPSON ROAD  
WINDSOR, CT 06088  
(888) 590-1899  
(800) 432-2795  
(386) 736-7695 FAX  
P & D APPLIANCE SVC  
100 SOUTH LINDEN AVE.  
S. SAN FRANCISCO, CA 94080  
(650) 635-1900  
800-424-1414  
FAX: (650) 635-1919  
pndappl@aol.com  
800-482-9269  
(888) 590-1996 FAX  
GCS SERVICE INC  
TAMPA, FL  
(813) 626-6044  
800-282-3008  
FAX: (501) 374-8352  
service@bromleyparts.com  
parts@bromleyparts.com  
DELAWARE  
FOOD SERVICE EQMT.  
2101 PARKWAY SOUTH  
BROOMALL, PA 19008  
(610) 356-6900  
FAX: (610) 356-2038  
dancerule@aol.com  
FAX: (813) 621-1174  
GCS SERVICE,INC.  
3717 CHERRY ROAD  
MEMPHIS, TN 38118  
(901) 366-4587  
800-262-9155  
FAX: (901) 366-4588  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
147  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS  
FLORIDA TO MARYLAND  
JONES-McLEOD APPLIANCE  
SVC  
854 LAKESIDE DRIVE  
MOBILE, AL 36693  
(251) 666-7278  
800-237-9859  
FAX: (251) 661-0223  
service@jones-mcleod.com  
HAWAII  
INDIANA  
CERTIFIED SERVICE CENTER  
1051 GOODWIN DRIVE  
LEXINGTON, KY 40505  
(606) 254-8854  
800-432-9269  
FAX: (606) 231-7781  
jatkins@certifiedsc.com  
FOOD EQMT. PARTS &  
SERVICE CO.  
300 PUUHALE RD.  
HONOLULU, HI 96819  
(808) 847-4871  
GCS SERVICE INC.  
INDIANAPOLIS, IN  
(317) 545-9655  
800-727-8710  
FAX: (317) 549-6286  
FAX: (808) 842-1560  
fepsco@hula.net  
B622 LA PAS TRAIL  
INDIANAPOLIS, IN 46268  
(317) 290-8060  
(800) 410-9794  
(317) 290-8085 FAX  
NASS PARTS AND SERVICE,  
INC.  
1108 SOUTH WOODS AVENUE  
ORLANDO, FL 32805  
(407) 425-2681  
GCS SERVICE INC.  
LOUISVILLE, KY  
(502) 367-1788  
800-752-6160  
FAX: (502) 367-0400  
IDAHO  
RESTAURANT APPLIANCE  
SVC.  
(800) 432-2795  
(407) 425-3463 FAX  
7219 ROOSEVELT WAY NE  
SEATTLE, WA 98115  
(206) 524-8200  
IOWA  
GOODWIN TUCKER GROUP  
GCS SERVICE INC.  
LEXINGTON, KY  
(606) 255-0746  
800-432-9260  
FAX: (606) 255-0748  
NASS PARTS AND SERVICE,  
INC.  
1376 HEIDE AVENUE  
PALM BAY, FL 32907  
(321) 952-2012  
800-433-9390  
FAX: (206) 525-2890  
info@restappl.com  
2900 DELAWARE AVENUE  
DES MOINES, IA 50317  
(515) 262-9308  
800-372-6066  
FAX: (515) 262-2936  
parts@goodwintucker.com  
RON'S SERVICE  
LOUISIANA  
(800) 432-2795  
(321) 953-0266 FAX  
703 E 44TH STREET STE 10  
GARDEN CITY, ID 83714  
(208) 375-4073  
HERITAGE SERVICE GROUP  
1532 RIVER OAKS WEST  
NEW ORLEANS, LA 70123  
(504) 734-8864  
(800) 499-2351  
(504) 733-2559 FAX  
CONES REPAIR SVC.  
1056 27TH AVENUE SW  
CEDAR RAPIDS, IA 52404  
(319) 365-3325  
GEORGIA  
FAX: (208) 375-4402  
GCS SERVICE INC  
ATLANTA, GA  
ILLINOIS  
800-747-3326  
(770) 452-7322  
800-334-3599  
FAX: (770) 452-7473  
CONES REPAIR SVC.  
2408 40TH AVE.  
MOLINE, IL 61265  
(309) 797-5323  
800-716-7070  
FAX: (309)797-3631  
jackb@cones.com  
FAX: (319) 365-0885  
MAINE  
KANSAS  
GCS SERVICE INC.  
CHELSEA, MA  
(617) 889-9393  
800-225-1155  
FAX: (617) 889-1222  
HERITAGE FOODSERVICE  
GROUP OF ATLANTA  
2100 NORCROSS PKWY.  
SUITE 130  
GCS SERVICE INC.  
KANSAS CITY, MO  
(816) 920-5999  
800-229-6477  
NORCROSS, GA 30071  
(770) 368-1465  
866-388-9837  
EICHENAUER SERVICES INC.  
130 S OAKLAND ST.  
DECATUR, IL 62522  
(217) 429-4229  
800-252-5892  
FAX: (217) 429-0226  
esi@esiquality.com  
FAX: (816) 920-7387  
MASSACHUSETTS RESTAU-  
RANT SUPPLY  
34 SOUTH STREET  
SOMERVILLE, MA 02143  
(617) 868-1930  
GENERAL PARTS, INC.  
1101 E. 13TH STREET  
KANSAS CITY, MO 64106  
(816) 421-5400  
FAX: (866) 388-9838  
WHALEY FOODSERVICE  
REPAIRS  
(800) 279-9967  
800-338-6737  
109-A OWENS INDUSTRIAL  
DRIVE  
SAVANNAH, GA 31405  
(912) 447-0827  
(816) 421-1270 FAX  
FAX: (617) 686-5331  
GCS SERVICE INC.  
ELMHURST, IL  
(630) 941-7800  
KENTUCKY  
PINE TREE FOOD EQUIP-  
MENT  
888-765-0036  
FAX: (912) 447-0826  
800-942-9689  
FAX: (630) 941-6048  
CERTIFIED SERVICE CENTER  
127 DISHMAN LANE  
BOWLING GREEN, KY 42101  
(270) 783-0012  
(877) 907-0012  
FAX: (270) 783-0058  
175 LEWISTON ROAD  
GRAY, ME 04039  
(207) 657-6400  
(800) 540-5427  
(207) 657-5464 FAX  
PIERCE PARTS & SERVICE  
2422 ALLEN ROAD  
MACON, GA 31216  
(478) 781-6003  
GCS SERVICE INC.  
ST. LOUIS, MO  
(314) 683-7444  
800-284-4427  
MARYLAND  
800-368-2512  
FAX: (478) 781-7186  
FAX: (314) 638-0135  
CERTIFIED SERVICE CENTER  
RAMCO BUSINESS PARK  
4283 PRODUCE ROAD  
LOUISVILLE, KY 40218  
(502) 964-7007  
EMR SERVICE DIVISION  
700 EAST 25TH STREET  
BALTIMORE, MD 21218  
(410) 467-8080  
GENERAL PARTS, INC.  
248 JAMES STREET  
BENSONVILLE, IL 60106  
(630) 595-3300  
800-637-6350  
800-879-4994  
(800) 880-3604  
FAX: (630)595-0006  
FAX: (502) 964-7202  
cwalker@certifiedsc.com  
droenigk@certifiedsc.com  
FAX: (410) 467-4191  
baltparts@emrco.com  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
148  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS  
MARYLAND TO NEW YORK  
EMR SERVICE DIVISION  
106 WILLIAMSPORT CIRCLE  
SALISBURY, MD 21804  
(410) 543-8197  
MICHIGAN  
GCS SERVICE INC.  
ST. LOUIS, MO  
(314) 638-7444  
NEW HAMPSHIRE  
GCS SERVICE INC.  
LIVONIA, MI  
GCS SERVICE INC.  
CHELSEA, MA  
800-284-4427  
888-687-8080  
FAX: (410) 548-4038  
baltparts@emrco.com  
(248) 426-9500  
800-772-2936  
FAX: (248) 426-7555  
FAX: (314) 638-0135  
(617)889-9393  
800-225-1155  
FAX: (617) 889-1222  
KAEMMERLIN PARTS & SVC.  
2728 LOCUST STREET  
ST. LOUIS, MO 63103  
(314) 535-2222  
FAX: (314) 535-6205  
petek@kps.stl.com  
EMR SERVICE DIVISION  
5316 Sunnyside Ave.  
Beltsville, MD 20715  
(301) 931-7000  
ACE SERVICE CO.  
95 HAMPTON AVE.  
NEEDHAM, MA 02494  
(781) 449-4220  
800-225-4510 MA & NH  
FAX: (781) 444-4789  
taceservice@aol.com  
JACKSON SERVICE COMPA-  
NY  
3980 BENSTEIN RD.  
COMMERCE TWSHP, MI 48382  
(248) 363-4159  
800-348-2365  
FAX: (301) 931-3060  
baltparts@emrco.com  
GCS SERVICE INC.  
SILVER SPRING, MD  
(301) 585-7550 (DC)  
(410) 792-0338 (BALT)  
(800) 638-7278  
800-332-4053  
FAX: (248) 363-5448  
GENERAL PARTS, INC.  
1101 EAST 13TH STREET  
KANSAS CITY, MO 64106  
(816) 421-5400  
(800) 279-9967  
(816) 421-1270 FAX  
MASSACHUSETTS RESTAU-  
RANT SUPPLY  
34 SOUTH STREET  
SOMERVILLE, MA 02143  
(617) 868-1930  
GCS SERVICE INC.  
GRAND RAPIDS, MI  
(616) 241-0200  
FAX: (301) 495-4410  
800-823-4866  
FAX: (616) 241-0541  
MONTANA  
800-338-6737  
MASSACHUSETTS  
FAX: (617) 868-5331  
MINNESOTA  
RESTAURANT APPLIANCE  
SVC.  
ACE SERVICE CO.  
95 HAMPTON AVE.  
NEEDHAM, MA 02494  
(781) 449-4220  
800-225-4510 MA & NH  
FAX: (781) 444-4789  
taceservice@aol.com  
NEW JERSEY  
GCS SERVICE INC.  
MINNEAPOLIS, MN  
(612) 546-4221  
800-345-4221  
FAX: (612) 546-4286  
7219 ROOSEVELT WAY NE  
SEATTLE, WA 98115  
(206) 524-8200  
800-433-9390  
FAX: (206) 525-2890  
info@restappl.com  
JAY HILL REPAIRS  
90 CLINTON RD.  
FAIRFIELD, NJ 07004  
(973) 575-9145  
800-836-0643  
FAX: (973) 575-5890  
jhrepair@aol.com  
MASSACHUSETTS RESTAU-  
RANT SUPPLY  
34 SOUTH STREET  
SOMERVILLE, MA 02143  
(617) 868-1930  
GENERAL PARTS, INC.  
11311 HAMPSHIRE AVENUE  
SOUTH  
BLOOMINGTON, MN 55438-  
2456  
NEBRASKA  
GOODWIN - TUCKER GROUP  
7535 D STREET  
OMAHA, NE 68124  
(402) 397-2880  
GCS SERVICE INC.  
EAST RUTHERFORD, NJ  
(973) 614-0003  
800-338-6737  
(952) 944-5800  
800-399-8294  
FAX: (617) 868-5331  
(800) 279-9980  
800-228-0342  
FAX: (973) 614-0230  
(800) 279-9980 FAX  
FAX: (402) 397-2881  
askme@goodwintucker.com  
GCS SERVICE INC.  
CHELSEA, MA  
(617) 889-9393  
GCS SERVICE INC.  
PHILADELPHIA, PA  
(215) 925-6217  
MISSISSIPPI  
NEVADA  
800-225-1155  
FAX: (617) 889-1222  
GCS SERVICE INC.  
JACKSON, MS  
(601) 956-7800  
800-441-9115  
FAX: (215) 925-6208  
HI TECH COMMERCIAL SER-  
VICE  
GCS SERVICE INC.  
HARTFORD, CT  
(860) 549-5575  
800-723-1562  
FAX: (860) 527-6355  
800-274-5954  
FAX: (601) 956-1200  
1840 STELLA LAKE STREET  
NORTH LAS VEGAS, NV 89106  
(702) 649-4616  
(877) 924-4832  
FAX: (702) 649-4607  
larry@hitechnv.com  
ELMER SCHULTZ SERVICES  
201 W. WASHINGTON AVE.  
PLEASANTVILLE, NJ 08232  
(609) 641-0317  
800-378-1641  
FAX:(609) 641-8703  
GCS SERVICE INC.  
MEMPHIS, TN  
(901) 366-4587  
SUPERIOR KITCHEN SER-  
VICE INC.  
399 FERRY STREET  
EVERETT, MA 02149  
(617) 389-1899  
800-262-9155  
FAX: (901) 366-4588  
elmer2@erols.com  
5454 LOUIE LANE  
RENO, NV 89511  
(775) 852-9696  
NEW YORK  
MISSOURI  
FAX: (775) 852-5104  
APPLIANCE INSTALLATION  
AND SERVICE CORP.  
1336 MAIN STREET  
BUFFALO, NY 14209  
(716) 884-7425  
(888) 590-1899  
(617) 389-1996 FAX  
GCS SERVICE INC.  
KANSAS CITY, MO  
(816) 920-5999  
GCS SERVICE INC.  
LAS VEGAS, NV  
(702) 450-3495  
800-229-6477  
FAX: (816) 920-7387  
800-500-9060  
800-722-1252  
FAX: (702) 450-3491  
FAX: (716) 884-0410  
ais@worldnet.att.net  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
149  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS  
NEW YORK TO PENNSYLVANIA  
B.E.S.T. INC.  
AUTHORIZED APPLIANCE  
SERVICECENTER  
904 S. MARSHALL ST.  
WINSTON-SALEM, NC 27403  
(336) 725-5396  
OHIO  
OREGON  
3003 GENESEE STREET  
BUFFALO, NY 14225  
(716) 893-6464  
800-338-5011  
FAX: (716) 893-6466  
bestserv@aol.com  
CERTIFIED SERVICE CENTER  
890 REDNA TERRACE  
CINCINNATI, OH 45215  
(513) 772-6600  
RON'S SERVICE  
16364 SW 72ND AVE  
PORTLAND, OR 97224  
(503) 624-0890  
FAX:(336) 721-1289  
800-543-2060  
800-851-4118  
AUTHORIZED APPLIANCE  
SERVICECENTER  
104 HINTON AVE.  
WILMINGTON, NC 28403  
(910) 313-1250  
FAX:(910) 313-6130  
FAX: (513) 612-6600  
sbarasch@certifiedsc.com  
FAX: (503) 684-6107  
lrobinson@ronsservice.com  
DUFFY'S EQUIPMENT SVC.  
3138 ONEIDA STREET  
SAUQUOIT, NY 13456  
(315) 737-9401  
800-443-8339  
FAX: (315) 737-7132  
duffyequip@aol.com  
CERTIFIED SERVICE CENTER  
171J-K NORTH HAMILTON RD.  
COLUMBUS, OH 43213  
(614) 751-3769  
(866) 862-1252  
FAX: (614) 751-5792  
PENNSYLVANIA  
A.I.S. COMMERCIAL PARTS &  
SERVICE  
1816 WEST 26TH STREET  
ERIE, PA 16508  
(814) 456-3732  
800-332-3732  
WHALEY FOODSERVICE  
8334-K ARROWRIDGE BLVD  
CHARLOTTE, NC 28273  
(704) 529-6242  
FAX: (704) 529-1558  
info@whaleyfoodservice.com  
NORTHERN PARTS & SVC.  
21 NORTHERN AVENUE  
PLATTSBURGH, NY 12903  
(518) 563-3200  
800-634-5005  
FAX: (800) 782-5424  
info@northernparts.com  
jadkins@certifiedsc.com  
CERTIFIED SERVICE CENTER  
6025 N. DIXIE DRIVE  
DAYTON, OH 45414  
(937) 898-4040  
(800) 257-2611  
FAX: (937) 898-4177  
dharvey@certifiedsc.com  
FAX: (814) 452-4843  
aiserie@aol.com  
WHALEY FOODSERVICE  
REPAIRS  
203-D CREEK RIDGE RD.  
GREENSBORO, NC 27406  
(336) 333-2333  
ELMER SCHULTZ SVC.  
540 NORTH 3RD STREET  
PHILADELPHIA, PA 19123  
(215) 627-5400  
FAX: (215) 627-5408  
elmer2@erols.com  
GCS SERVICE INC.  
BROOKLYN, NY  
(718) 486-5220  
FAX: (336) 333-2533  
info@whaleyfoodservice.com  
COMMERCIAL PARTS & SVC.  
OF COLUMBUS  
800-969-4271  
FAX: (718) 486-6772  
5033 TRANSAMERICA DRIVE  
COLUMBUS, OH 43228  
(614) 221-0057  
800-837-8327  
FAX: (614) 221-3622  
GCS SERVICE INC.  
PHILADELPHIA, PA  
(215) 925-6217  
800-441-9115  
FAX: (215) 925-6208  
WHALEY FOODSERVICE  
REPAIRS  
335-105 SHERWEE DRIVE  
RALEIGH, NC 27603  
(919) 779-2266  
ALL SERVICE KITCHEN  
EQUIPMENT REPAIR  
10 CHARLES ST.  
NEW HYDE PARK, NY 11040  
(516) 378-1176  
FAX: (919) 779-2224  
info@whaleyfoodservice.com  
GCS SERVICE INC.  
COLUMBUS, OH  
(614) 476-3225  
GCS SERVICE INC.  
HARRISBURG, PA  
(717) 564-3282  
FAX: (516) 378-1735  
ALL ISLAND REPAIRS  
40-9 BURT DRIVE  
DEER PARK, NY 11729  
(631) 242-5588  
WHALEY FOODSERVICE  
REPAIRS  
6418-101 AMSTERDAM WAY  
WILMINGTON, NC 28405  
(910) 791-0000  
800-282-5406  
FAX: (614) 476-1196  
800-367-3225  
FAX: (717) 564-9286  
ELECTRICAL APPLIANCE  
REPAIR SVC.  
5805 VALLEY BELT ROAD  
CLEVELAND, OH 44131  
(216) 459-8700  
GCS SERVICE INC.  
PITTSBURGH, PA  
(412) 787-1970  
800-738-1221  
FAX: (412) 787-5005  
FAX: (631) 242-6102  
FAX: (910) 791-6662  
info@whaleyfoodservice.com  
NORTH CAROLINA  
AUTHORIZED APPLIANCE  
SERVICECENTER  
1020 TUCKASEEGEE RD.  
CHARLOTTE, NC 28208  
(704) 377-4501  
NORTH DAKOTA  
800-621-8259  
FAX: (216) 459-8707  
tomr@electapplrep.com  
K & D PARTS AND SERVICE  
CO.  
1833-41 N CAMERON STREET  
HARRISBURG, PA 17103  
(717) 236-9039  
GCS SERVICE INC.  
MINNEAPOLIS, MN  
(612) 546-4221  
OKLAHOMA  
(800) 532-6127  
800-345-4221  
FAX:(704) 377-4504  
FAX: (612) 546-4286  
HAGAR RESTAURANT EQMT.  
1229 W MAIN STREET  
OKLAHOMA CITY, OK 73106  
(405) 235-2184  
800-445-1791  
FAX: (405) 236-5592  
800-932-0503  
FAX: (717) 238-4367  
kdparts-service@paonline.com  
AUTHORIZED APPLIANCE  
SERVICECENTER  
800 N. PERSON ST.  
RALEIGH, NC 27604  
(919) 834-3476  
GENERAL PARTS, INC.  
10 SOUTH 18TH STREET  
FARGO, ND 58103  
(701) 235-4161  
CLARK SERVICE & PARTS  
306 AIRPORT DRIVE  
BOX 10  
(800) 279-9987  
FAX:(919) 834-3477  
(701) 235-0539 FAX  
SMOKETOWN, PA 17576  
(717) 392-5590  
(717) 392-5735  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
150  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS  
RHODE ISLAND TO WISCONSIN  
RHODE ISLAND  
WHALEY FOODSERVICE  
REPAIRS  
4740-A FRANCHISE STREET  
N. CHARLESTON, SC 29418  
(843) 760-2110  
GCS SERVICE INC.  
HOUSTON, TX  
(713)785-9187  
800-868-6957  
FAX: (713) 785-3979  
GCS SERVICE INC.  
VIRGINIA BEACH, VA  
(757) 464-3500  
800-476-4278  
FAX: (757) 464-4106  
GCS SERVICE INC.  
EAST PROVIDENCE, RI  
(401) 434-6803  
800-462-6012  
FAX: (843) 760-2255  
FAX: (401) 438-9400  
info@whaleyfoodservice.com  
GCS/STOVE PARTS  
2120 SOLANA STREET  
FORT WORTH, TX 76117  
(817) 831-0381  
WASHINGTON  
SUPERIOR KITCHEN SER-  
VICE INC.  
SOUTH DAKOTA  
GCS SERVICE INC.  
SEATTLE, WA  
669 ELMWOOD AVENUE  
PROVIDENCE, RI 02907  
(888) 590-1899  
GCS SERVICE INC.  
MINNEAPOLIS, MN  
(612) 546-4221  
800-433-1804  
FAX: (817) 834-7754  
bud@stoveparts.com  
(206) 763-0353  
800-211-4274  
FAX: (206) 763-5943  
(401) 781-1996 FAX  
800-345-4221  
FAX: (612) 546-4286  
UTAH  
RESTAURANT APPLIANCE  
SERVICE  
SOUTH CAROLINA  
GENERAL PARTS, INC.  
10 SOUTH 18TH STREET  
FARGO, ND 58103  
(701) 235-4161  
LA MONICA'S RESTAURANT  
EQMT. SVC.  
6182 SOUTH STRATLER  
AVENUE  
7219 ROOSEVELT WAY, NE  
SEATTLE, WA 98115  
(206) 524-8200  
AUTHORIZED APPLIANCE  
SERVICECENTER  
1811 TAYLOR ST.  
800-433-9390  
COLUMBIA, SC 29202  
(803) 254-8414  
(800) 279-9987  
(701) 235-0539 FAX  
MURRAY, UT 84107  
(801) 263-3221  
FAX: (206) 525-2890  
info@restappl.com  
FAX: (803) 254-5146  
800-527-2561  
TENNESSEE  
FAX: (801) 263-3229  
lamonica81@aol.com  
WEST VIRGINIA  
AUTHORIZED APPLIANCE  
SERVICECENTER  
2249 AUGUSTA RD.  
GREENVILLE, SC 29605  
(864) 235-9616  
GCS SERVICE INC.  
MEMPHIS, TN  
(901) 366-4587  
800-262-9155  
FAX: (901) 366-4588  
STATEWIDE SERVICE, INC.  
603 MAIN AVE.  
NITRO, WV 25143  
(304) 755-1811  
(800) 441-9739  
FAX: (304) 755-4001  
sws3182@aol.com  
VERMONT  
NORTHERN PARTS & SVC.  
4874 S. CATHERINE STREET  
PLATTSBURGH, NY 12901  
(518) 563-3200  
800-634-5005  
FAX: (800) 782-5424  
FAX: (864) 235-9623  
WHALEY FOODSERVICE  
REPAIRS  
I 26&US1  
GCS SERVICE INC.  
NASHVILLE, TN  
(615) 244-8050  
WISCONSIN  
P.O. BOX 4023  
800-831-7174  
info@northernparts.com  
WEST COLUMBIA, SC 29170  
(803) 791-4420  
800-877-2662  
FAX: (803) 794-4630  
info@whaleyfoodservice.com  
FAX: (615) 244-8885  
APPLIANCE SERVICE CEN-  
TER, INC.  
2439 ATWOOD AVE  
MADISON, WI 53704  
(608) 246-3160  
GCS SERVICE INC.  
CHELSEA, MA  
(617)889-9393  
800-225-1155  
FAX: (617) 889-1222  
TEXAS  
ARMSTRONG REPAIR CEN-  
TER  
800-236-7440  
WHALEY FOODSERVICE  
REPAIRS  
748 CONGAREE ROAD  
GREENVILLE, SC 29607  
(864) 234-7011  
800-494-2539  
FAX: (864) 234-6662  
info@whaleyfoodservice.com  
5110 GLENMOUNT DRIVE  
HOUSTON, TX 77081  
(713) 666-7100  
800-392-5325  
FAX: (713) 661-0520  
gm@armstrongrepair.com  
FAX: (608) 246-2721  
ascmad@execpc.com  
VIRGINIA  
DAUBERS, INC.  
APPLIANCE SERVICE  
CENTER, INC.  
6843 W. BELOIT RD.  
WEST ALLIS, WI 53219  
(414) 543-6460  
800-236-6460  
FAX: (414) 543-6480  
ascmil@execpc.com  
7645 DYNATECH COURT  
SPINGFIELD, VA 22153  
(703) 866-3600  
800-554-7788  
FAX: (703) 866-4071  
daubers@aol.com  
COMMERCIAL KITCHEN  
REPAIR CO.  
1377 N BRAZOS  
WHALEY FOODSERVICE  
REPAIRS  
P.O BOX 831128  
1406-C COMMERCE PL.  
MYRTLE BEACH, SC 29577  
(843) 626-1866  
FAX: (843) 626-2632  
info@whaleyfoodservice.com  
SAN ANTONIO, TX 78207  
(210) 735-2811  
800-292-2120  
FAX: (210) 735-7421  
brock@commercialkitchen.com  
GCS SERVICE INC.  
SILVER SPRING, MD  
(301) 585-7550(DC)  
(410) 792-0388(BALT)  
800-638-7278  
APPLIANCE SERVICE  
CENTER  
786 MORRIS AVE  
GREEN BAY, WI 54304  
(920) 496-9993  
FAX: (301)495-4410  
GCS SERVICE INC.  
DALLAS, TX  
(972) 484-2954  
800-442-5026  
800-236-0871  
FAX: (920) 496-9927  
ascfox@execpc.com  
GCS SERVICE INC.  
RICHMOND, VA  
(804) 672-1700  
FAX: (972) 484-2531  
800-899-5949  
FAX: (804) 672-2888  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
151  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS  
WISCONSIN TO WYOMING/INTERNATIONAL  
GENERAL PARTS, INC.  
W223 N735 SARATOGA DRIVE  
WAUKESHA, WI 53186  
(262) 650-6666  
(800) 279-9946  
(262) 650-6660 FAX  
WYOMING  
HAWKINS COMMERCIAL  
APPLIANCE SERVICE  
3000 S. WYANDOT ST.  
ENGLEWOOD, CO 80110  
(303) 781-5548  
(800) 624-2117  
FAX: (303) 761-5561  
johns@hawkinscommercial.com  
METRO APPLIANCE SERVICE  
1640 S BROADWAY  
DENVER, CO 80210  
(303) 778-1126  
800-525-3532  
FAX: (303) 778-0268  
metroappls@aol.com  
INTERNATIONAL  
GLOBAL PARTS AND SUPPLY  
7758 NW 72ND ST  
MIAMI, FL 33166  
(305) 885-6353  
H.D. SHELDON AND CO  
19 UNION SQUARE, WEST  
NEW YORK, NY 10003  
(212) 627-1759  
(212) 924-6920  
CANADA  
THE GARLAND GROUP  
1177 KAMATO ROAD  
MISSISSAUGA, ONTARIO L4W  
1X4  
(905) 206-8380  
SALES  
(905) 624-1419  
FAX: (905) 624-1851  
SERVICE  
800-427-6668  
FAX: 800-361-7745  
March 13, 2007  
AJ-64 Conveyor Series Technical Manual 7610-003-30-93  
Issued: 05-02-2006 Revised: N/A  
152  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Air Compressor 2115Ti User Manual
Insignia Automobile Parts NS MB5000 C User Manual
JBL Portable Speaker DS35 User Manual
JBL Portable Speaker S412P User Manual
Jensen Car Stereo System MCD5112 User Manual
John Deere Lawn Mower OMG X23532 J0 User Manual
John Deere Washer 8310RT User Manual
King Canada Drill KC 35 User Manual
KitchenAid Cooktop KECC506RSS04 User Manual
Klipsch Speaker System Quintet SL User Manual