COLOUR TELEVISION
EQUALIZER • CINEMA SURROUND • COMPONENT INPUT
Contents
Knowing your TV’s features ....................................................... 3
Remote control buttons and basic functions .............................. 4
TV buttons and functions ........................................................... 6
Setting up your TV ..................................................................... 7
Basic setting for picture.............................................................. 9
Advanced setting for picture .....................................................11
Original features for picture...................................................... 12
Basic setting for sound............................................................. 13
Advanced setting for sound ..................................................... 14
Favorite channel and video setting .......................................... 15
Customized setting .................................................................. 16
TV channel presetting .............................................................. 18
Additional preparation .............................................................. 21
Troubleshooting ....................................................................... 22
Specifications ........................................................................... 23
AV-21YS24
AV-21YX50
AV-20NX50
INSTRUCTIONS
GGT0096-001A-H
Download from Www.Somanuals.com. All Manuals Search And Download.
Knowing your TV’s features
Main features
TELETEXT
You can view teletext programmes which are broadcasted by some TV channels. Teletext
programme is an information in text form.
FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press.
AI VOLUME
TV adjusts the volume automatically to the same level for all TV channels to avoid sudden
change of the volume when selecting different TV channel.
VNR
You can reduce the picture noise when viewing noisy TV programmes or video sources.
3
2
WHITE BALANCE
You can choose one of three tones of white to match the video source such as movie,
sports, etc. Changing WHITE BALANCE affects the appearance of all other colours on the
screen.
CHILD LOCK
To prevent accidental operation by your child, you can disable the control buttons on the
TV.
Confirm your TV’s functions
Some functions written in this instruction manual may not be available for your TV.
When you press a button concerned to a function that is not available for your TV, it does not work and the
logo “Ø” appears on the screen. For a function that is not available for your TV, it is not displayed in the
menu.
4
1
Model No.
No.
Function
1
2
–
*PICTURE BOOSTER
(STEREO/I•II)
COMPRESS (16:9)
O
–
–
–
–
–
–
O
–
O
–
3,4 TELETEXT control buttons
O
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and basic functions
No. Press
POWER
MENU/OK
To
Turn on or off the TV from standby mode.
Display menu and confirm selected function.
5 / ∞ / 2 / 3 Select and adjust menu function.
CHANNEL -/+ Select the desired channel number.
VOLUME -/+ Adjust the volume level.
TV/VIDEO
MUTING
Select TV or video terminal input.
Turn off the volume.
Press this button again to resume the volume.
Display the programme number or video terminal number and PR list (channel list) on the
screen.
DISPLAY/
BACK
You can select the channel using the PR list.
1 Press the DISPLAY button once to display the PR list.
2 Press 5 / ∞ / 2 / 3 buttons to choose a channel, then press the MENU/OK button.
You can confirm the favorite channels in the PR list. The channels set to favorite channels are
indicated with coloured mark.
On the other hand, you can use this button to return to the previous menu.
Select the programme number. For two digits programme number, press -/--, then press the
number button.
0~9, -/--
+
RETURN
a) Return to the frequently view channel with one touch.
1 Choose the channel you want to register.
2 Press and hold RETURN+ button until “RETURN PLUS PROGRAMMED!” appears.
To cancel, press and hold RETURN+ button until “RETURN PLUS CANCELED!” appears.
b) Return to the previously viewed channel, if you have not set or have cancelled the Return
channel as above.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and basic functions (continued)
How to operate menus and menus locations
Top menu
MENU INPUT
2nd menu
EXT. INPUT
DISPLAY
PICTURE MODE
PICTURE SETTING P.10
WHITE BALANCE P.10
Location 3rd menu
Location
To
Operation
Note
P.17
P.17
P.9
–
–
–
–
–
–
–
–
–
–
Display the MENU Press the MENU/OK button
.
To exit the MENU,
press the DISPLAY/
PICTURE
BACK button*
or
*
If you want to
adjust PICTURE
SETTING menu,
you must set
PICTURE MODE
menu to USER.
choose EXIT menu.
Display the top
menu
Press 5/∞ buttons
to choose a Press ∞ button to
menu title. Then press MENU/OK display the next page
PICTURE
FEATURES
–
VNR
P.16
button
Press 5/∞ buttons
menu title. Then press MENU/OK
button
Press 5/∞ buttons
menu title. Then press MENU/OK
button
.
for more functions.
FAVORITE CH SETTING P.15
VIDEO SETTING P.15
COLOUR SYSTEM P.9
PICTURE BOOSTER P.10
COMPRESS (16:9) P.11
Display the 2nd
menu
to choose a
.
Display the 3rd
menu
to choose a
.
SOUND
STEREO/I•II
AI VOLUME
SOUND MODE
EQUALIZER
BALANCE
SOUND TURBO
CINEMA SURROUND P.14
OFF TIMER
CHILD LOCK
P.14
P.14
P.13
P.14
P.13
P.13
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Return to the
previous menu
Press the DISPLAY/BACK button*
.
*
If you want to
–
adjust EQUALIZER
menu, you must
set SOUND MODE
menu to USER.
Choose the setting Press 5/∞ buttons
to choose Press the MENU/OK
of a function
a function. Then press the 2/3
button
to exit from
buttons
to change the setting. the menu.
Adjust the effect
level of a function
Press 5/∞ buttons
to choose
a function. Then press the 2/3
–
buttons
level.
to adjust the effect
FEATURES
INSTALL
P.16
P.16
–
–
Display the sub
Press the 5/∞ buttons
to
menu of a function. choose a function. Then press
AUTO PROGRAM P.18
EDIT/MANUAL
–
–
–
MENU/OK buttons
the sub menu.
to display
P.18
DELETE, MOVE,
P.18-
MANUAL,INSERT P.19
The following chart shows locations of functions in menus. In this manual,
location of a function is described as follows:
LANGUAGE
BLUE BACK
AUTO SHUTOFF
VIDEO-2 SETTING P.17
TEXT LANGUAGE P.12
P.16
P.11
P.17
LANGUAGE
P.16
–
–
–
–
–
–
2nd menu
MENU
Top menu
MENU
2nd menu
Top menu
3rd menu
Note: Some functions have the 4th menus as the sub-menus.
TEXT LANGUAGE P.12
* To exit the menu, the on screen display will show BACK indicated in
blue. But it doesn’t refer to the blue button on the remote control.
Instead, it refers to the DISPLAY/BACK button on the remote control.
EXIT
–
–
–
–
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TV buttons and functions
The illustrations shown below is for AV-20NX50 and AV-21YX50 only, which are used for explanation purpose.
Your TV may not look exactly the same as illustrated.
No. Button/terminal Description
Page
–
–
Front of the TV
L (main power) Press to turn on or turn off the TV’s main power.
AV-20NX50
POWER lamp
Indicate the TV is being turned on or off.
No colour : TV’s main power is being turned off.
9
8
7
6
5
4
3 2
1
Red :
TV’s main power is being turned on.
TIMER lamp
Indicate the OFF TIMER function is being turned on or off.
No colour : The OFF TIMER function is being turned off.
–
MENU
OK
CHANNEL
VOLUME
TIMER
POWER
V
L
/
MONO
IN (VIDEO-3)
R
Orange :
The OFF TIMER function is being turned on.
Remote control sensor
–
–
–
VOLUME -/+
CHANNEL -/+
MENU
Press to adjust the volume level.
Press to select the desired channel.
Press to display the menu.
AV-21YX50
4
9
8
7
6
5
3 2
1
–
IN (VIDEO-3)
IN (VIDEO-2)
Video and audio input jacks for VIDEO-3 mode.
Video and audio input jacks for VIDEO-2 mode.
Headphone jack.
21
21
21
7
TIMER POWER
MENU
OK
CHANNEL
VOLUME
V
L
/
MONO
IN (VIDEO-2)
R
Aerial socket.
OUTPUT
Video and audio output jacks. (The component video
signal cannot be output.)
Video or component video, and audio input jacks for
Rear of the TV
21
AV-20NX50
AV-21YX50
COMPONENT
(VIDEO-2) INPUT VIDEO-2 mode. You can select the input signal by setting
COMPONENT
(VIDEO-2)
INPUT
VIDEO-1
INPUT
VIDEO-1
OUTPUT
OUTPUT
INPUT
the “VIDEO-2 SETTING” function (see page 17).
21
7
VIDEO-1 INPUT Video and audio input jacks for VIDEO-1 mode
V
L
Y
V
/
V
V
L
V
L
How to operate the menus with the TV button
Work as same as the button on the
L
L
C
C
B
/
/
MONO
MONO
/
MONO
TV button
Note
R
R
R
R
R
R
remote control unit
MENU
MENU/OK button
To display main menu and exit
menu after finish setting.
"
!
#
$
"
$
!
CHANNEL -/+ ∞/5 button
To select menu function.
VOLUME -/+ 2/3 button
To adjust the desired function.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV
CAUTION
•
Turn off the equipment including the TV before connecting.
1 Connecting the aerial cable.
2 Connecting the compatible main plug to the AC outlet.
VHF/UHF outdoor aerial
75-ohm coaxial cable (not supplied)
If you connect a VCR, connect the aerial output jack of your VCR
and the aerial jack on the TV with the aerial cable. Then connect the
output jacks of your VCR and the VIDEO-1 input jacks of the TV
with the video cable and audio cables. For details, see the manual
of your VCR.
3 Inserting batteries into the remote control.
Insert two batteries by following the + and -
polarities and inserting the - end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• It the remote control does not work properly, fit
new batteries. The supplied batteries are for testing,
not regular use.
Rear of TV
VHF/UHF outdoor aerial
AV-20NX50
COMPONENT
VIDEO-1
(VIDEO-2)
OUTPUT
INPUT
INPUT
V
L
Y
V
L
/
V
L
CB
/
/
MONO
MONO
4 Turn on the TV by pressing the main power button.
CR
R
R
R
JVC logo appears on the screen.
To video
output
To audio
output
To RF
output
VCR
To aerial input
The illustration shown is just a sample. It may not be same as your
TV.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV (continued)
5 Making the initial settings
Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV menu by following the steps as below:
TEXT LANGUAGE
AUTO PROGRAM
AUTO PROGRAM
EDIT
LANGUAGE
PR
7
8
CH/CC
CH 09
CH 11
CH 13
ENGLISH
РУССКИЙ
GROUP-1
GROUP-2
GROUP-3
SETUP TOUR RESTART?
CH 12
22%
9
I
3
MELAYU
INDONESIA
OK
RESTART
NO
10
11
12
13
I
BACK
I
BACK
I
OK
OK
BACK
I
IINSERT
IDELETE
IMANUAL
OK
OK MOVE
• Press 5/∞ button to
select your desired
language.
• Press 5/∞ button to
select your desired
Teletext language
group. For details,
see page 12.
• TV will start searching • Press the red button to
• To complete the initial
setting, press the
MENU/OK button. To
edit the channel list,
see page 18.
for the channels.
cancel the SETUP
TOUR RESTART
function.
To stop AUTO
PROGRAM, press
MENU/OK button.
If you want to make
initial settings again
when the next time you
turn on the TV, press
the MENU/OK button
to activate the SETUP
TOUR RESTART
function.
If the JVC logo does not appear, use LANGUAGE, TEXT LANGUAGE and AUTO PROGRAM functions to make the initial settings.
Those functions are located in the INSTALL menu.
If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic setting for picture
COLOUR SYSTEM
PICTURE MODE
You can select the appropriate colour system when the picture is
not clear or no colour appears.
You can choose the desired picture setting with one-touch.
Press the PICTURE MODE button to select a setting.
Press the COLOUR SYSTEM button to select a setting.
SOFT
Softens contrast and sharpness.
BRIGHT
STANDARD
USER
Heightens contrast and sharpness.
Standard picture setting.
You can change this picture setting as you like.
Select USER and adjust following items in the
PICTURE SETTING menu. (CONTRAST, BRIGHT,
SHARP, COLOUR, TINT*)
AUTO
PAL
SECAM
NTSC3.58
NTSC4.43
To operate this function with a menu:
❇
MENU
PICTURE menu
PICTURE FEATURES menu
*TINT can only be adjusted in NTSC system.
COLOUR SYSTEM
To operate this function with a menu:
❇
MENU
PICTURE menu
PICTURE MODE
For the colour system in each country or region, see the table
below:
To return the USER setting to the default, press the blue button
when the PICTURE SETTING menu appears.
Area
Country or Region
System
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, etc.
PAL
❇ About the basic operations of the menu, please see the “How
Indonesia, Malaysia, Singapore, Thailand, India, etc.
Asia, Middle
East
China, Vietnam, etc.
Hong Kong, etc.
PAL
PAL
to operate menus and menus locations” on page 5.
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. SECAM
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
NTSC
SECAM
PAL
PAL
PAL
Europe
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
PAL
PAL
PAL
Egypt, Morocco, etc.
SECAM
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic setting for picture (continued)
Adjusting the picture – USER
WHITE BALANCE
You can adjust the desired picture setting when selecting USER
in PICTURE MODE.
You can change the white balance of the picture to better match
the type of video being viewed.
Select the WHITE BALANCE in the PICTURE menu, then choose
the desired setting.
1 Select the USER in PICTURE MODE under PICTURE menu.
❇
PICTURE menu
MENU
USER
PICTURE MODE
❇
PICTURE menu
MENU
WHITE BALANCE
2 Select the PICTURE SETTING in PICTURE menu, then adjust
NORMAL
COOL
WARM
Normal white balance.
Bluish white.
Reddish white.
the setting.
❇
PICTURE menu
MENU
PICTURE SETTING
CONTRAST
BRIGHT
SHARP
COLOUR
TINT*
2 : Lower contrast
2 : Darker
2 : Softer
2 : Lighter
2 : Reddish
3 : Higher contrast
3 : Brighter
3 : Higher
3 : Deeper
3 : Greenish
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
*TINT can only be adjusted in NTSC system.
PICTURE BOOSTER
You can improve picture clarity when the picture is unclear due
to the low signal reception.
Press the PICTURE BOOSTER button to select the desired mode.
HIGH
LOW
OFF
Perform at maximum level.
Perform at minimum level.
Cancel the function
To operate this function with a menu:
❇
PICTURE menu
MENU
PICTURE FEATURES menu
PICTURE BOOSTER
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced setting for picture
COMPRESS (16:9)
You can convert a normal picture (4:3 aspect ratio) into a wide
picture (16:9 aspect ratio).
Select the COMPRESS (16:9) in the PICTURE FEATURES menu
under PICTURE menu, then choose ON or OFF.
❇
PICTURE menu
MENU
PICTURE FEATURES menu
COMPRESS (16:9)
BLUE BACK
You can set the TV to automatically change to a blue screen and
mute the sound if the signal is weak or absent, or when there is
no input from an antenna.
Select the BLUE BACK in the INSTALL menu, then choose ON or
OFF.
❇
MENU
INSTALL menu
BLUE BACK
If you wish to continue viewing the poor picture, cancel the BLUE
BACK function.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Original features for picture
2 Press a colour button, then press the number buttons to enter
TELETEXT
the page number.
You can watch the Teletext broadcast channel with TEXT function.
1 Press the TEXT button to select the desired mode as follows:
3 Press and hold down the
(Store) button.
The page number is blinking white to indicate that they are
stored in memory.
TV mode
TEXT mode
MIX mode
4 To store other favorite teletext pages, repeat Step 2 to 3.
To recall the favorite teletext page, press the MODE button, then
press the colour button.
To exit the List mode, press the MODE button again.
When viewing teletext programme, menu operations are not
available.
2 Press the CHANNEL -/+ buttons, number buttons or colour
buttons to select other Teletext pages.
3 Press TEXT or TV/VIDEO button to return to TV mode.
You can also operate the teletext using the following buttons:
If characters on a teletext programme do not appear properly,
change the TEXT LANGUAGE setting.
(Hold)
Hold a teletext page.
The
(Hold) are displayed at the top left of the screen.
To cancel, press
(Hold) button again.
TEXT LANGUAGE
(Reveal)
Display the hidden text (e.g. answers to a quiz).
To cancel, press (Reveal) button again.
You can set the Teletext language group that corresponds to the
(Size)
Enlarge the teletext display.
programmes.
Select TEXT LANGUAGE in the INSTALL menu, then choose the
desired language group.
(Index)
(Cancel)
Return to the index page instantly.
Watch TV programme while waiting for a teletext page.
When the teletext page is found, a page number
appears at the upper left of the screen.
❇
INSTALL menu
MENU
TEXT LANGUAGE
GROUP-1
English, German, Swedish / Finnish / Danish /
Hungarian, Italian, French, Spanish / Portuguese,
Turkish
Press
(Cancel) to view the teletext page.
(Sub-page)
Operate the
(Sub-page) function.
Sub-page numbers are displayed at the left of the
screen.
To cancel sub-page function, press
button again.
GROUP-2
GROUP-3
Polish, German, Estonian, Slovenian, Czech /
Slovakian, Rumanian
Polish, German, Estonian, Lettish, Russian, Ukrainian
(Sub-page)
Depending on the broadcast, the language set may not display
properly. For details, see in page 8.
Using the List mode
You can store and recall the favorite teletext pages in memory
using the colour buttons.
1 In TEXT mode, press the MODE button to enter the List mode.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic setting for sound
SOUND SYSTEM
SOUND MODE
You can select an appropriate sound system when abnormal
sound occurs even when the picture appears normally.
Press the SOUND SYSTEM button to select a setting.
You can choose the desired sound setting.
Select the SOUND MODE in SOUND menu, then choose the
setting.
❇
MENU
SOUND menu
B/G
I
D/K
M
SOUND MODE
.
.
USER
You can change this sound setting as you like.
Select USER and adjust the frequencies in EQUALIZER
(100, 300, 1K, 3K, 8K Hz).
For details, see “EQUALIZER” on page 14.
Emphasize on both vocal sound and music.
Emphasize on music effect.
This function is not available in video mode.
For the sound system in each country or region, see the table
below:
Area
Country or Region
System
DYNAMIC
MUSIC
NEWS
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, etc.
B/G
Indonesia, Malaysia, Singapore, Thailand, India, etc.
Emphasize on vocal sound.
Asia, Middle
East
China, Vietnam, etc.
Hong Kong, etc.
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
D/K
I
BALANCE
M
You can adjust the volume balance between the left and right
speakers.
Select the BALANCE in SOUND menu, then adjust the setting.
D/K
D/K
B/G
I
B/G
I
Europe
❇
MENU
SOUND menu
BALANCE
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
B/G
B/G
SOUND TURBO
Egypt, Morocco, etc.
You can enjoy the emphatic low and high frequency levels.
Press the SOUND TURBO to select ON or OFF.
To operate this function with a menu:
❇
MENU
SOUND menu
SOUND TURBO
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced setting for sound
CINEMA SURROUND
EQUALIZER
You can enjoy an enhanced sound for wider audience.
Press the CINEMA SURROUND button to select a setting.
You can adjust the sound level of each frequencies when
selecting USER mode in SOUND MODE.
OFF
Cancel the function.
1 Select the USER in SOUND MODE under SOUND menu.
❇
LOW
HIGH
MONO
Listen to sound with less wider audience effect.
Listen to sound with more wider audience effect.
Listen to mono sound with stereo effect.
SOUND menu
MENU
SOUND MODE
USER
2 Select the EQUALIZER in SOUND menu.
❇
MENU
SOUND menu
EQUALIZER
To operate this function with a menu:
The following display appears.
❇
MENU
SOUND menu
CINEMA SURROUND
EQUALIZER
If slight volume distortion occurs when you select HIGH mode,
change the setting to LOW mode. The CINEMA SURROUND
effect will be less noticeable.
100 300
1K
3K
8K Hz
If you use CINEMA SURROUND and SOUND TURBO together,
volume distortion might occurs.
BACK
I
OK
.
I
3 Select and adjust the desired frequencies.
STEREO / I II (
)
4 Press the MENU/OK button to exit the menu.
Adjust high frequency will affect higher pitch sound and vice versa.
You can enjoy the stereo and bilingual broadcasted programmes.
Press the
button to select the desired mode.
Select stereo sound.
AI VOLUME
Select monaural sound.
Select bilingual I (sub I).
Select bilingual II (sub II).
I
II
You can adjust the volume of all the channels and video inputs to
the same level automatically.
Select the AI VOLUME in SOUND menu, then choose ON or OFF.
This function is not available in video mode.
To operate this function with a menu:
❇
SOUND menu
MENU
AI VOLUME
❇
I
SOUND menu
MENU
STEREO / I II
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorite channel and video setting
4 Select the desired item that you wish to adjust.
CONTRAST BRIGHT SHARP COLOUR
To register the favorite channel
You can register and recall 4 favorite channels by using the
colour buttons (red, green, yellow, blue).
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)
TINT
1 In TV mode, select a TV channel (PR01-99) you desired to register.
5 Press the MENU/OK button to exit the menu.
2 Press and hold a colour button for 3 seconds or more.
“FAVORITE CHANNEL I PROGRAMMED!” appears on the
screen and current channel is registered.
To adjust the video setting (VIDEO SETTING)
You can adjust the picture and sound settings for video inputs.
3 To register other favorite channels, repeat Step 1 to 2.
To recall the favorite channel, press the colour button.
When the TV is in menu mode, favorite channel function is not
available.
1 Display the PICTURE menu and select VIDEO SETTING in
PICTURE FEATURES menu.
❇
MENU
PICTURE menu
PICTURE FEATURES menu
VIDEO SETTING
To adjust favorite channel setting
(FAVORITE CH SETTING)
2 Select VIDEO STATUS in VIDEO SETTING menu, then
choose the desired video input.
❇
VIDEO SETTING
VIDEO STATUS
You can adjust the picture and sound settings for the favorite channels.
1 Display the PICTURE menu and select FAVORITE CH
SETTING in PICTURE FEATURES menu.
VIDEO SETTING
3 Select EFFECT, then press 2/3 button
to choose ON.
VIDEO STATUS
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
VIDEO-1
❇
MENU
PICTURE menu
PICTURE FEATURES menu
To cancel the settings, choose OFF.
FAVORITE CH SETTING
SOUND MODE
EFFECT
USER
ON
2 Select FAVORITE CHANNEL in FAVORITE CH SETTING
menu, then choose the desired favorite channel.
BACK
I
IRESET
OK
❇
FAVORITE CH SETTING
FAVORITE CHANNEL
FAVORITE CH SETTING
3 Select EFFECT, then press 2/3 button
to choose ON.
4 Select the desired item that you wish to adjust.
CONTRAST BRIGHT SHARP COLOUR
FAVORITE CHANNEL
CONTRAST
BRIGHT
I
PR 01
To cancel the settings, choose OFF.
TINT
SHARP
COLOUR
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)
TINT
SOUND MODE
EFFECT
5 Press the MENU/OK button to exit the menu.
USER
ON
BACK
I
❇ About the basic operations of the menu, please see the “How
OK
to operate menus and menus locations” on page 5.
.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Customized setting
VNR
CHILD LOCK
You can reduce the picture noise.
You can disable the front control buttons of the TV.
Select the VNR in the PICTURE FEATURES menu under
Select the CHILD LOCK in the FEATURES menu, then choose
PICTURE menu, then choose a setting of VNR function.
ON or OFF.
❇
❇
PICTURE menu
FEATURES menu
MENU
PICTURE FEATURES menu
MENU
CHILD LOCK
VNR
OFF TIMER
OFF
VNR is turned off.
You can set the TV to turn off automatically to standby mode after
a set time.
Press the OFF TIMER button to select a desired period of time.
AUTO
MIN
MAX
Effect of VNR is automatically controlled.
Effect of VNR becomes minimum level.
Effect of VNR becomes maximum level.
OFF TIMER
If you select MAX, the picture becomes softer even if the original
picture is sharp.
0
120
You can set the period of time
to a maximum of 120 minutes
in 10 minutes step.
10
LANGUAGE
You can choose your desired on screen display language.
Select the LANGUAGE in the INSTALL menu, then choose a
BACK
I
OK
language.
❇
To operate this function with a menu:
INSTALL menu
MENU
LANGUAGE
❇
FEATURES menu
MENU
OFF TIMER
When the elapsed of time left one minute, “GOOD NIGHT!”
appears on the screen.
You can display the OFF TIMER menu again to confirm or
change the remaining time.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Customized setting (continued)
AUTO SHUTOFF
EXT. INPUT (TV/VIDEO)
You can set the TV to turn off automatically when no signal is
received for about 15 minutes or longer after the end of a
broadcast.
You can select TV or video terminal input with one touch.
Press the TV/VIDEO button to select an input.
To operate this function with a menu:
❇
Select AUTO SHUTOFF in INSTALL menu, then choose ON or
INPUT menu
MENU
EXT. INPUT
OFF.
❇
MENU
INSTALL menu
AUTO SHUTOFF
DISPLAY
The AUTO SHUTOFF function does not turn off the TV’s main
power.
The AUTO SHUTOFF function is not available in video mode.
You can display the programme number, video terminal number
and PR list on the screen.
Press the DISPLAY button to select the desired mode:
ON
OFF
PR LIST
VIDEO-2 SETTING
You can set the VIDEO-2 SETTING according to the video signal
output from the external devices connected to the VIDEO-2
terminal.
Choose a TV channel or a VIDEO terminal.
1 Press the DISPLAY button to display the PR LIST.
2 Select a programme number or video terminal by pressing the
5/∞ button to move up/down on the programme number or
press the 2/3 button to skip for each 7 programme numbers,
Select the VIDEO-2 SETTING in INSTALL menu, then choose a
setting.
❇
MENU
INSTALL menu
VIDEO-2 SETTING
then press MENU/OK button.
PR LIST
VIDEO
If a normal video signal (composite video signal) is
input.
PR
AV
1
2
3
4
5
6
CH/CC
I
I
I
I
CH 03
CH 05
CH 07
CH 09
CC 04
CC 05
B
R
COMPONENT
If a component video signal (Y/C /C ) is input.
For connecting methods, see “Additional Preparation” on page
21.
.
-7 OK +7
.
To operate this function with a menu:
❇
INPUT menu
MENU
DISPLAY
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel presetting
2 Choose EDIT/MANUAL, then press the MENU/OK button.
To register the TV channels automatically
EDIT menu appears.
You can register the TV channels into the TV’s channel list
automatically.
EDIT
PR
7
8
CH/CC
CH 09
CH 11
CH 13
1 Display the INSTALL menu.
❇
INSTALL menu
MENU
9
I
3
10
11
12
13
2 Choose AUTO PROGRAM, then press the MENU/OK button.
AUTO PROGRAM function starts, and the channels received
are registered in the channel list (PR list) automatically.
BACK
I
IINSERT
IDELETE
IMANUAL
OK MOVE
3 “SETUP TOUR RESTART?” appears.
To start the SETUP
TOUR
To skip the SETUP
TOUR
Press the MENU/OK button. Then proceed to
step 5 of “Setting up your TV” on page 8.
Press the Red button.
3 Choose the channel which you want to register.
4 Press the blue button to activate the MANUAL function.
The sound system of the channel appears at the right of the
CH/CC number.
5 Press the 3 button to choose an appropriate sound system.
For details, see “SOUND SYSTEM” on page 13.
4 The EDIT menu appears.
To edit the channel
list
Proceed to the Step 3 of “To edit the channel
list (PR LIST)” on page 19.
6 Press the green or red button to search for the TV channel.
Searching stops when a channel is found and displayed.
7 Repeat step 5 until your desired TV channel appears
If a channel is not
registered
To exit the menu
Proceed to the Step 3 of “To register the
TV channels manually” on this page.
Press the MENU/OK button.
For details of “SETUP TOUR”, see page 8.
If the reception is poor Press the blue or yellow button to fine tune
the TV channel.
If noisy sound is heard Press the 3 button to choose an appropriate
sound system.
To register the TV channels manually
(MANUAL in the EDIT menu)
You can register the TV channels into the TV’s channel list manually.
8 Press the MENU/OK button to exit the menu.
1 Display the INSTALL menu.
❇ About the basic operations of the menu, please see the “How
❇
INSTALL menu
MENU
to operate menus and menus locations” on page 5.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel presetting (continued)
To edit the channel list (PR LIST)
(MOVE and DELETE in the EDIT menu)
To add in the new channel
(INSERT in the EDIT menu)
You can edit the TV channel list as you like.
Note: After this operation, other channel’s PR numbers will be
changed.
You can add in the new channel in the TV channel list as you like.
You need to find the “CH/CC” number for the TV channel. Find the
“CH/CC” number corresponding to the channel number of the TV
channel from the attached sheet “CH/CC number list” on page 20.
1 Display the INSTALL menu.
❇
1 Display the INSTALL menu.
INSTALL menu
MENU
❇
INSTALL menu
MENU
2 Choose EDIT/MANUAL, then press the MENU/OK button.
2 Choose EDIT/MANUAL, then press the MENU/OK button.
EDIT menu appears.
EDIT menu appears.
EDIT
PR
7
8
CH/CC
CH 09
CH 11
CH 13
3 Choose the PR number for which you will register a new TV
channel. When you add a new TV channel of NTSC-M system,
press the SOUND SYSTEM button to change the sound
system to M. Then proceed to the next step.
9
I
3
10
11
12
13
4 Press the green button, then press 5/∞ buttons to choose
BACK
I
IINSERT
IDELETE
IMANUAL
OK MOVE
“CC” or “CH”.
5 Press the number button to enter the remaining CH/CC
number.
3 Choose the channel which you want to change PR number, or
delete.
The TV starts to search the TV channel, and the picture of the
TV channel appears. If the TV finds no TV channel, a noisy
picture appears.
4 Do the following action:
To change the PR
number (MOVE)
Press the 3 button. Then move it to the PR
number you want to use it for the channel.
Finally press the 2 button.
When a TV channel has already been registered in PR99, using
the INSERT function deletes that TV channel.
To delete the
Press the yellow button.
channel (DELETE)
❇ About the basic operations of the menu, please see the “How
5 Press the MENU/OK button to exit the menu.
to operate menus and menus locations” on page 5.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel presetting (continued)
CH
US
CCIR
E33
E34
E35
E36
E37
E38
E39
E40
E41
E42
E43
E44
E45
E46
E47
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E58
E59
E60
E61
E62
E63
E64
E65
E66
E67
E68
E69
OIRT
AUSTRALIA
CC
US
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
CCIR
S-18
S-19
S-20
S-21
S-22
S-23
S-24
S-25
S-26
S-27
S-28
S-29
S-30
S-31
S-32
S-33
S-34
S-35
S-36
S-37
S-38
S-39
S-40
S-41
OIRT
AUSTRALIA
CH/CC number
CH 33
CH 34
CH 35
CH 36
CH 37
CH 38
CH 39
CH 40
CH 41
CH 42
CH 43
CH 44
CH 45
CH 46
CH 47
CH 48
CH 49
CH 50
CH 51
CH 52
CH 53
CH 54
CH 55
CH 56
CH 57
CH 58
CH 59
CH 60
CH 61
CH 62
CH 63
CH 64
CH 65
CH 66
CH 67
CH 68
CH 69
US-33, W+48
US-34, W+49
US-35, W+50
US-36, W+51
US-37, W+52
US-38, W+53
US-39, W+54
US-40, W+55
US-41, W+56
US-42, W+57
US-43, W+58
US-44, W+59
US-45, W+60
US-46, W+61
US-47, W+62
US-48, W+63
US-49, W+64
US-50, W+65
US-51, W+66
US-52, W+67
US-53, W+68
US-54, W+69
US-55, W+70
US-56, W+71
US-57, W+72
US-58, W+73
US-59, W+74
US-60, W+75
US-61, W+76
US-62, W+77
US-63, W+78
US-64, W+79
US-65, W+80
US-66, W+81
US-67, W+82
US-68, W+83
US-69, W+84
CC 18
CC 19
CC 20
CC 21
CC 22
CC 23
CC 24
CC 25
CC 26
CC 27
CC 28
CC 29
CC 30
CC 31
CC 32
CC 33
CC 34
CC 35
CC 36
CC 37
CC 38
CC 39
CC 40
CC 41
CC 42
CC 43
CC 44
CC 45
CC 46
CC 47
CC 48
CC 49
CC 50
CC 51
CC 52
CC 53
CC 54
CC 55
CC 56
CC 57
CC 58
CC 59
CC 60
CC 61
CC 62
CC 63
CC 64
CC 75
CC 76
CC 77
CC 78
CC 79
CC 95
CC 96
CC 97
CC 98
CC 99
When you want to use the INSERT
function on page 19, find the CH/CC
number corresponding to the channel
number of the TV channel from this table.
Channel No. Country
US
CCIR
United States, Philippines, etc..
Middle East, Southeast Asia,
etc..
U
V
W
OIRT
Eastern Europe, Russia,
Vietnam, etc..
W+1
W+2
W+3
W+4
W+5
W+6
W+7
W+8
W+9
W+10
W+11
W+12
W+13
W+14
W+15
W+16
W+17
W+18
W+19
W+20
W+21
W+22
W+23
W+24
W+25
W+26
W+27
W+28
AUSTRALIA
Channel
Australia, etc..
CH
US
CCIR
E2
OIRT
R1
AUSTRALIA
AU-0
AU-1
AU-2
AU-6
AU-7
AU-8
AU-9
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CH 17
CH 18
CH 19
CH 20
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CH 27
CH 28
CH 29
CH 30
CH 31
CH 32
US-2
US-3
US-4
US-5
US-6
US-7
US-8
US-9
US-10
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
R2
R6
R7
R8
R9
R10
R11
R12
AU-10
AU-11
US-11
US-12
US-13
US-14, W+29
US-15, W+30
US-16, W+31
US-17, W+32
US-18, W+33
US-19, W+34
US-20, W+35
US-21, W+36
US-22, W+37
US-23, W+38
US-24, W+39
US-25, W+40
US-26, W+41
US-27, W+42
US-28, W+43
US-29, W+44
US-30, W+45
US-31, W+46
US-32, W+47
CC
US
CCIR
S-1
S-2
S-3
S-4
S-5
S-6
S-7
S-8
OIRT
AUSTRALIA
AU-5
CC 01
CC 02
CC 03
CC 04
CC 05
CC 06
CC 07
CC 08
CC 09
CC 10
CC 11
CC 12
CC 13
CC 14
CC 15
CC 16
CC 17
E21
E22
E23
E24
E25
E26
E27
E28
E29
E30
E31
E32
AU-5A
X
Y
Z
Z+1
Z+2
S-9
R3
R4
R5
S-10
S-11
S-12
S-13
S-14
S-15
S-16
S-17
AU-3
AU-4
A-5
A-4
A-3
A-2
A-1
A
B
C
D
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional preparation
The illustrations shown below is for AV-20NX50 and AV-21YX50
only, which are used for explanation purpose.
Your TV may not look exactly the same as illustrated.
Connecting to rear component/video input
terminal and output terminal
Rear of TV
Before connecting
AV-20NX50
VCR (for playing)
DVD player (composite signals)
•
Read the manuals provided with the devices for the proper
connection.
COMPONENT
(VIDEO-2)
INPUT
VIDEO-1
OUTPUT
INPUT
•
•
Turn off all the devices including the TV.
Note that connecting cables are not supplied.
VCR (for recording)
V
L
Y
V
/
V
Connecting to front video input terminal
L
L
CB
/
/
MONO
MONO
DVD player
(component video signals)
CR
R
R
R
AV-20NX50
Front of TV
Camcorder or TV game
Rear of TV
AV-21YX50
MENU
OK
V
L
/
MONO
IN (VIDEO-3)
R
VIDEO-1
INPUT
OUTPUT
Headphones
AV-21YX50
VCR (for playing)
DVD player (composite signals)
V
L
V
L
V
L
IN (VIDEO-2)
/
MONO
R
MENU
OK
/
MONO
VCR (for recording)
R
R
When connecting to COMPONENT (VIDEO-2) input, depending
on the connection, choose the appropriate video input using the
menu (see page 17).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If a problem occurs when you are using the TV, check the below
troubleshooting guide before calling for repair.
• Cannot operate the
remote control
• The batteries may be exhausted. Replace with
new batteries (see page 7).
• Ensure that you are operating the remote less
than seven meters from the front of your TV.
• No picture,
no sound
• Deactivate the BLUE BACK function if it is turned
on.
• Choose the appropriate sound system. Refer to
“SOUND SYSTEM” on page 13.
• Cannot operate the
menus
• Press TV/VIDEO button to return to TV mode and
try operating the menus.
• Cannot operate the
front control buttons
• Deactivate the CHILD LOCK function if it is turned
on (see page 16).
• Snowy picture
• Check the aerial cable and its connection with the
TV.
• TV is turned off
suddenly
• This may due to the AUTO SHUTOFF function is
activated. Press the POWER button to turn on the
TV.
• Stripes appear on • Interference occurs caused by other devices such
the picture
as an amplifier, personal computer, or a hair drier.
Move such devices away from your TV.
• Colour patches
appear at the corner
of the screen
• This may due to the magnetized device such as a
speaker near to your TV. Keep the device apart
from your TV. Alternately, you can also use the
magnetic-shielded speaker.
• Double-pictures
(ghosting) occur
• Interference occurs caused by signal reflecting
from mountains or building. Try to adjust the
aerial’s direction or use a better directionality
antenna.
• Image takes a short
period to be
displayed
• Image required time to stabilize before display.
This is not a malfunction.
• Poor picture
• Choose the appropriate colour system. Refer to
“COLOUR SYSTEM” on page 9.
• Adjust the COLOUR or BRIGHT setting. Refer to
“Adjusting the picture - USER” on page 10.
• TV may emitted
crackling sound
• This is due to a sudden change in temperature
and it is not a malfunction. If the crackling sound
is too frequent, request your service technician for
inspection.
• White and bright still • Inevitable phenomenon due to the nature of the
image look as if it
were coloured
picture tube. This is not a malfunction.
• Feel a slight electric
shock when
touching the TV
screen
• This is due to the static electricity of the picture
tube and it will not harm the human body. This is
not a malfunction.
• Top of the image
from software
products or video
tape is distorted
• This is due to the condition of the video signal
whereby the image was not recorded properly.
This is not a malfunction.
• Poor sound
• Adjust the sound frequency properly. Refer to
“EQUALIZER” on page 14.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TV RF systems
B, G, I, D, K, M
Colour systems
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
Receiving channels
VHF low channel (VL), VHF high channel (VH), UHF channel (U)
Receives cable channels in mid band, super band and hyper band.
External input / output
VIDEO-1:
VIDEO input, AUDIO L/R input
VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input (For AV-20NX50 only )
VIDEO-3:
OUTPUT:
VIDEO input, AUDIO L/R input (For AV-20NX50 only )
VIDEO output, AUDIO L/R output
Headphone jack:
Stereo mini jack (3.5 mm diameter)
Sound-multiplex systems
A2 (B/G) or NICAM (B/G,I,D/K)
Teletext system
FLOF (Fastext), WST (World Standard Text)
Language displayed by teletext
Please see the table in the description “ TEXT LANGUAGE “ on page 12.
Depends on the model, STEREO/I•II function for the Sound-multiplex systems or Teletext function
may not be available. Please confirm with the chart on page 3.
Design and specifications subject to change without notice.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
0405-FLE-JMT
© 2005 Victor Company of Japan, Limited
Download from Www.Somanuals.com. All Manuals Search And Download.
|