VIDEO CASSETTE PLAYER
-
HR J P400K
-
HR J P200A
STANDBY/ON
NTSC
PLAYBACK
ON PAL TV
MIC
DIGITAL ECHO
SP/LP/EP
1
MIC
2
B.E.S.T POWER-ON LP
STANDBY REC
/ EP
NTSC
4.43
B.E.S.T.
/
PAL NTSC
MIN
MAX
0
10
NTSC 3.58
REMOTE CONTROL UNIT
VIDEO
TV/VCR
AUTO
-
TRACKING
+
-
-
TV CH +
VOLUME
+
TV/VCR
STANDBY/ON
TV
NTSC
PLAYBACK
ON PAL TV
VIDEO
AUDIO
SP/LP/EP
B.E.S.T POWER-ON LP
STANDBY REC
/ EP
NTSC 3.58/4.43
G, RECORDING
NTSC PLAYBACK ON PAL TV
NTSC
4.43
PAL
B
/
D
/
K
MESECAM
B
/
G,
D
/
K
B.E.S.T.
/
PAL NTSC
NTSC 3.58
PAL NTSC
The VCP illustrations appearing in this instruction manual are of the HR-JP400K.
Рисунки для видеомагнитофона, подаваемые в данной инструкции по
эксплуатации, относятся к модели HR-JP400K.
INS TRUCTIONS
LPT0416-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Front panel
STANDBY/ON
NTSC
PLAYBACK
ON PAL TV
MIC
DIGITAL ECHO
SP/LP/EP
1
MIC
2
B.E.S.T POWER-ON LP
STANDBY / REC
/
EP
NTSC
4.43
B.E.S.T.
PAL NTSC
MIN
MAX
0
10
NTSC 3.58
HR-JP400K
STANDBY/ON
NTSC
PLAYBACK
ON PAL TV
VIDEO
AUDIO
SP/LP/EP
B.E.S.T POWER-ON LP
STANDBY / REC
/
EP
NTSC 3.58/4.43
G, RECORDING
NTSC PLAYBACK ON PAL TV
NTSC
4.43
PAL
B
/
D
/
K
MESECAM
B
/
G,
D
/
K
B.E.S.T.
PAL NTSC
NTSC 3.58
HR-JP200A
1 STANDBY/ON
button
@ Mode indicators
To turn the power on and off (standby mode).
B.E.S.T. indicator
•
Lights when B.E.S.T. in set to on.
2 Cassette loading slot
POWER-ON indicator
•
•
Load the video cassette here.
Lights when the power turns on.
Blinks while a cassette is ejected.
3 Rewind 1 button
LP / EP indicator
•
Torewindthevideotapeandtostartreverseshuttlesearch
playback mode.
Lights when the tape speed is LP(PAL) or EP(NTSC)
mode.
STANDBY / REC indicator
4 Play # button
•
Lights when the power turns off (Standby mode) or
during recording mode.
To start playback.
•
Blinks during recording pause mode.
5 Fast forward ¡ button
To fast forward the video tape and to start forward shuttle
search playback mode.
Note:
All five indicators excluding the STANDBY/REC indicator
blink one by one in a clockwise sequence during playback
or fast forward mode and in a counterclockwise sequence
during rewind mode. They do not blink one by one during
rewinding in the repeat playback mode.
6 Pause 8 button
To freeze the picture during playback and to engage the
recording pause mode.
7 Stop/Eject § button
# DIGITAL ECHO control (HR-JP400K only)
To stop playback and to eject the video tape.
To add as much echo to your voice.
8 Record ¶ button
$ MIC volume control (HR-JP400K only)
To start recording.
To adjust the microphone volume.
9 B.E.S.T. button
% SP / LP / EP button
To set the B.E.S.T. (Biconditional Equalized Signal Track-
ing) system to on.
To select the recording tape speed.
^ MIC input terminals (HR-JP400K only)
0 Remote sensor window
For remote control operation.
& VIDEO/AUDIO IN terminals (HR-JP200A only)
! Colour System Output switch
Select to watch an NTSC tape and to record NTSC signal.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Terminals and wireless remote control
Rear panel
RF OUT
32(24)
IN
OUT
40(27)
AUDIO
K
G
ANT.IN
VIDEO
002
1 AC power cord
HR-JP400K
2 RF channel adjustment screw
3 RF. OUT terminal
4 AUDIO/VIDEO IN terminals
(HR-JP400K only)
5 AUDIO/VIDEO OUT terminals
6 ANT. IN terminal
7 TV system switch
RF OUT
ANT.IN
32(24)
40(27)
OUT
AUDIO
K
G
001
VIDEO
HR-JP200A
Remote control
5 Play 3 button
REMOTE CONTROL UNIT
VIDEO
To start playback.
TV/VCR
6 Record ¶ button
Press the Record ¶ and Play 3 buttons together, to start
AUTO
-
TRACKING
+
recording.
7 TV channel –/+ buttons
8 TV VOLUME –/+ buttons
-
-
TV CH
+
+
9 POWER
(Player) button
To turn the power on and off (standby mode).
VOLUME
TV/VCR
0 TRACKING –/+ buttons
TV
To adjust tracking during playback.
! Fast forward ¡ Z button
To fast forward the video tape. Also to start forward shuttle
search playback.
@ Pause 8 button
To freeze the picture during playback. Also to engage the
recording pause mode.
# Stop 7 button
To stop playback.
When using the remote control for operation of the video
cassette player, make sure that it is pointed at the remote
sensor window.
$ POWER
(TV) button
To turn the TV power on and off.
You can also use the player’s remote control to operate a JVC
television.
% TV/VCR (TV) button
To switch TV between TV and VCR (or AV).
1 Transmitting window
Notes:
2 TV/VCR (Player) button
• Point the remote control toward the sensor window.
• The maximum operating distance of the remote control is
about 8 m.
• When inserting the batteries, be sure to insert in the correct
directions as indicated under the battery cover.
• If the remote control doesn’t work properly, remove its
batteries, wait a short time, replace the batteries and then try
again.
Not function
3 Digital AUTO TRACKING button
To cancel the Auto tracking mode.
4 Rewind 1 + button
To rewind the video tape. Also to start reverse shuttle
search playback.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Make sure that the power to the video cassette player and TV
is off before making the following connections.
Connection A
HR-JP400K
RF OUT
ANT.IN
32(24)
40(27)
IN
OUT
AUDIO
K
G
VIDEO
002
Connection B
Connection A
STANDBY/ON
VIDEO
AUDIO
HR-JP200A
RF OUT
32(24)
40(27)
OUT
K
G
AUDIO
ANT.IN
002
VIDEO
Connection B
Note:
If you put a TV set directly on this VCP or install it too close to
a TV set, noise may occur. If this noise occurs, separate the
VCP and the TV set.
Connect the TV’s VIDEO OUT and AUDIO OUT termi-
nals to the video cassette player’s VIDEO IN and AU-
DIO IN terminals.
2
Connection A (basic)
In order to use the video cassette player it must be connected
between the antenna and the TV.
Connect the TV’s VIDEO IN and AUDIO IN terminals to
the VCP’s VIDEO OUT and AUDIO OUT terminals.
3
1 Cploanyneer’cstAyNouTr. ITNVtearnmteinnnala. cable to the video cassette
Connect the power cord to your household AC outlet.
4
2 Cthoenvniedcetoocnaesesnedtteofptlhaeyeprr’sovRidFe. dORUFT atenrtmeninnaalcaanbdlethtoe
TV system
other end to the TV’s antenna terminal.
The TV system switch should be set as follows.
K position: Set to this position for K system areas (East-
ern European countries).
3 Connect the power cord to your household AC outlet.
G position: Set to this position for G system areas (West-
Connection B
ern European countries for example).
For connection of a TV that has VIDEO/AUDIO IN/OUT termi-
nals. This connection is necessary to record TV programmes.
UseRCAtypepinconnectioncords(availablefromaudio/video
stores) for connection. This connection is in addition to connec-
tion A.
K
G
Note:
• When connection B is used to connect the TV and video
cassette player, setting the TV system switch is not
necessary.
Follow steps 1 and 2 of “Connection A”.
1
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the video channel The video cassette
To watch videos on your TV, it must be set to the same UHF
channel as the video cassette player. This channel is used as
the video channel.
Inserting a cassette
This video cassette player has been preset to UHF channel 36.
STANDBY/ON
Note:
• When you have connected the VIDEO/AUDIO OUT termi-
NTSC
MIC
DIGITAL ECHO
PLAYBACK
ON PAL TV
SP/LP/EP
1
MIC
2
B.E.S.T POLP
ST
/
EP
NTSC
4.43
nals of this video cassette player to your TV’s video/audio in
terminals (connection B of the “Connections” section), set-
ting the video channel is not necessary. In this case simply
set the TV’s TV/VCR switch to VCR.
B.E.S.T.
PAL NTSC
MIN
MAX
0
10
NTSC 3.58
1 Tpurer-nrethcoervdieddeovicdaesosteatptee.player’s power on and load a
2 Turn on the TV and set it to UHF channel 36.
If UHF channel 36 is being used for broadcasting in
your area:
STANDBY/ON
1
MIC
2
P
B.E.S.T.
PAL NTSC
MIN
MAX
0
10
SC 3.58
AdjusttheTV’schannelselectoralittleatatimeuntiltheTV
screen is blank (set it towards a higher or lower channel).
Adjust the RF channel adjustment screw on the rear panel
of the video cassette player a little at a time until the
playback picture appears on the TV screen.
7 Insert the cassette as shown and push it gently into the
video cassette player.
Thevideocassetteplayerwillbeturnedonautomaticallyand
the cassette will be loaded.
7 Press the Stop/Eject § button to eject a cassette.
During playback or recording, press the § button twice
(once to stop the tape and once more to eject it).
Lower channel
32(24)
Notes:
40(27)
• If the cassette’s safety tab has been removed, playback will
start automatically when the cassette is inserted.
• A cassette can also be ejected when the power is off.
• ThePOWER-ONindicatorblinkswhilethecassetteisejected.
Higher channel
Special note on Video Cassettes
• If the TV’s channel selector was set to a higher channel
than channel 36, turn the RF channel adjustment screw
to the left and vice versa.
To prevent accidental recording on a recorded cassette, re-
move its safety tab. To record on it later, cover the hole with
adhesive tape.
Adjust the TV picture with the TV’s tuning controls.
3
Using the TV while the video
cassette player is connected
Safety tab
To watch a normal TV broadcast, select a TV station with
the TV’s channel selector.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
NTSC, PAL and MESECAM video tapes can be played back on
this video cassette player. Refer to the “Colour system output
mode selection” section for details.
NTSC Playback on PAL TV
• The vertical size of the playback picture will shrink and some
picture “noise” may appear on the screen.
• The playback picture may roll. In this case adjust the picture
with the TV’s vertical hold knob (with some TV’s this adjust-
ment may not be possible).
Before proceeding:
• The colour of the playback picture may differ from the
• Turn on the power of the TV and video cassette player.
• Make sure that the TV is set to the video channel or that the
TV’s TV/VIDEO switch is set to VIDEO (refer to the “Setting
the video channel” section for details).
original.
• In the forward/reverse shuttle search or still modes there
may be no colour depending on the TV and video cassette
player combination.
Colour system output mode selec-
tion
REMOTE CONTROL UNIT
VIDEO
TV/VCR
AUTO
-
TRACKING
+
1
2
2
To watch an NTSC tape, it will be necessary to select one of the
following output modes.
-
-
TV CH +
VOLUME
+
TV/VCR
Selecting the NTSC PLAYBACK ON PAL TV mode
Select this mode to watch NTSC tapes on a PAL system TV.
NTSC
TV
MIC
DIGITAL ECHO
PLAYBACK
ON PAL TV
SP/LP/EP
B.E.S.T POWER-ON LP EP
/
NTSC
4.43
B.E.S.T.
STANDBY / REC
PAL TS
MIN
MAX
0
10
NTSC 3.58
NTSC
PLAYBACK
ON PAL TV
NTSC
4.43
NTSC3.58
Load a pre-recorded cassette.
If the safety tab on the cassette is removed, playback will
start automatically.
1
2
Selecting the NTSC 4.43 mode
Select this mode to watch NTSC tapes on a multi-system TV
(that has an NTSC 4.43 setting).
Press the Play - button to start playback.
Select NTSC 4.43 to record NTSC 4.43 signal.
NTSC
PLAYBACK
ON PAL TV
7 Press the Stop/Eject § button or the remote control’s
Stop 7 button to stop playback.
NTSC
4.43
To fast forward or rewind the tape:
7 From the stop mode, press the Fast forward ¡ or
Rewind 1 button.
NTSC3.58
Selecting the NTSC 3.58 mode
Select this mode to watch NTSC tapes on a NTSC system TV.
Note:
All five indicators excluding the STANDBY/REC indicator blink
one by one in a clockwise sequence during playback or fast
forward mode and in a counterclockwise sequence during
rewind mode. They do not blink one by one during rewinding
in the repeat playback mode.
NTSC
PLAYBACK
ON PAL TV
NTSC
4.43
NTSC3.58
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback features
Slow motion playback
Repeat playback
Slow motion playback is 1/6 of the normal playback speed. The
sound will be cut during slow motion playback.
Use this feature to repeat playback of a cassette 50 times.
During playback:
During playback:
Press the Play 3 button for more than 5 seconds.
1
Press the Pause 8 button for 2 seconds.
The Play indicator will blink slowly and playback of the
1
cassette will repeat 50 times automatically.
7 Press the Play 3 button to return to the normal playback
Press the Stop 7 button to stop repeat playback.
2 Tape playback will be stopped and the repeat playback
speed.
mode will be cancelled.
Notes:
• If the picture shakes during the slow mode, use the manual
tracking +/– buttons to correct the picture.
• After approx. 5 minutes, the slow mode will disengage to
protect the video tape.
Rewind power off
When the tape has finished rewinding, the VCP will turn itself off.
During stop:
Still picture and frame advance
Press the Rewind 1 button.
1
Use this feature to freeze the playback picture and to advance
one frame at a time. The sound will be cut during this mode.
Press the STANDBY/ON
button within 2 seconds.
2 The STANDBY/REC indicator will blink.
During playback:
Tracking adjustment
Press the Pause 8 button.
1 The picture will be frozen.
Automatic tracking is adjusted each time a cassette is inserted
in the video cassette player, you may wish to adjust tracking
manually during playback.
PressthePause8buttonrepeatedlytoadvanceframes.
2 Eachtimethebuttonispressedthestillpicturewilladvance
Manual tracking:
one frame.
Press the remote control’s AUTO button.
7 Press the Play 3 button to resume normal playback.
1
2
Press the remote control’s TRACKING + or – button to
adjust tracking.
Notes:
• If the picture shakes during the still mode, use the manual
tracking +/– buttons to correct the picture.
• After the picture has been frozen for approx. 5 minutes, the
still mode will disengage to protect the video tape.
7 Press the AUTO button to return to automatic tracking.
Notes:
• Trackingmayneedtobeadjustedeachtimeadifferentvideo
Shuttle search playback
tape is inserted for playback.
• Tracking will be automatically set to the reference position
when the cassette is ejected.
Use this feature during playback to visually locate any point on
arecordedcassette. Thesoundwillbecutduringshuttlesearch
operation.
ATTENTION:
In the search, still, slow-motion or frame advance mode,
• the picture will be distorted.
During playback:
• the noise bars will appear.
Press the Fast forward ¡ or Rewind 1 button to
1
• there will be loss of colour.
engage shuttle search forward or reverse.
• the picture may not appear.
These problems may occur especially in the SP mode.
7 Press the Play 3 button to resume normal playback.
Notes:
• Whenthevideocassetteplayerisinthestopmode,pressthe
Play 3 button to start playback before engaging the shuttle
search mode.
• For short searches, press and hold Fast forward or Rewind
button. When released, normal playback will continue.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Karaoke features
Recording
Use the following procedure to record TV programmes on a
blank video tape.
Karaoke (HR-JP400K only)
Use this feature to enjoy karaoke video. Connect a microphone
to both MIC 1 and MIC 2 for duets.
Before proceeding:
Insert a pre-recorded Karaoke tape.
1
• To record TV programmes, the video cassette player must
be connected to the TV as shown in connection B of the
“Connections” section.
• Turn on the power of the TV and video cassette player.
• Make sure that the video cassette’s safety tab is intact. If it
has been removed, cover the hole with adhesive tape.
2 Press the PLAY 3 button.
Adjust the MIC volume as necessary.
3
Adjust the DIGITAL ECHO volume as necessary.
4
REMOTE CONTROL UNIT
VIDEO
TV/VCR
1
5 Start singing.
AUTO
-
TRACKING
+
3
Note:
-
-
TV CH +
Check that the power is off (standby mode) before plugging in
the microphone.
NTSC
MIC
DIGITAL ECHO
VOLUME
+
TV/VCR
PLAYBACK
ON PAL TV
SP/LP/EP
B.E.S.T POWER-ON LP
STANDBY REC
/
EP
NTSC
4.43
B.E.S.T.
/
PAL NTSC
MIN
MAX
0
10
NTSC 3.58
TV
2
3
Load a blank video tape.
1
Press SP/LP/EP button to set the recording speed.
2 If LP or EP is selected, the LP/EP indicator will light.
Press the Record ¶ button to start recording. (On the
3
remote control unit press the Record ¶ and Play 3
button at the same time.)
The recording indicator will light during recording.
7 Press the Stop/Eject § button or the remote control’s
Stop 7 button to stop recording.
To stop recording temporarily:
7 Press the Pause 8 button.
The recording indicator will blink.
Press the Play 3 button to resume recording.
Notes:
• To engage recording standby, press the Record ¶ button
and then press the Pause 8 button. The recording indicator
will blink during recording standby. Press the Play 3 button
again to start recording.
• If the Record ¶ button does not work, check to see if the
cassette safety tab has been removed.
• The player automatically stops when record-standby contin-
ues for more than 5 minutes.
• The video tape will be rewound automatically when the end
of the tape is reached.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
B.E.S.T. picture system
The B.E.S.T. (Biconditional Equalized Signal Tracking) system
checks the condition of the tape in use during recording and
playback, and compensates to provide the highest-possible
recording and playback pictures. The default setting for both
recording and playback is ‘‘ON’’.
Playback
The recorder assesses the quality of the tape once you initiate
playback.
When watching a tape recorded with B.E.S.T. set to on, it is
recommended that you leave B.E.S.T. on during playback as
well.
Recording
Press Play 3 button to start playback.
Insert a cassette with the record safety tab intact.
1
1
7 The recorder adjusts the playback picture quality based on
7 The recorder power comes on automatically.
the quality of the tape in use.
7 B.E.S.T. is active during Auto Tracking.
The default setting is ‘‘ON’’.
2
Notes:
• When watching a rental tape, or one recorded on another
video recorder, set B.E.S.T. to on or off to your preference by
pressing B.E.S.T. button.
7 If this is the case, go to step 3. If not, press B.E.S.T. button
to set B.E.S.T.on and B.E.S.T. indicator lights.
• B.E.S.T. indicator only lights at the beginning of automatic
tracking.Eventhoughitdoesn’tappearafterthat,theB.E.S.T.
function is operative.
Press and hold Record ¶ and Play 3 buttons on the
3
remote, or press Record ¶ button on the recorder.
7 The recorder spends approximately 7 seconds assessing
the condition of the tape, then begins recording.
Notes:
• The B.E.S.T. system works only after a tape has been
inserted and the Record mode is first initiated. It does not
work during recording.
• Once the cassette is ejected, the B.E.S.T. data is cancelled.
The next time the cassette is used for recording, B.E.S.T. is
re-performed.
ATTENTION:
Since the B.E.S.T. system works before recording actually
starts, there is a delay of approximately 7 seconds after
Record ¶ and Play 3 buttons on the remote are pressed,
or Record ¶ button on the recorder is pressed. To make
sure you record the desired scene or programme in its
entirely, first perform the following steps:
1 PressandholdPause8 andRecord¶ buttonstoengage
the Record Pause mode.
• The recorder then automatically check the condition of
the tape and, after approximately 7 seconds, reenters
Record Pause.
2 Press Play 3 button to start recording.
• If you want to bypass the B.E.S.T. system and begin
recording immediately, press B.E.S.T. button to set
B.E.S.T. off.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
EditingTo/From Another Recorder
HR-JP400K
Player
HR-JP200A
Player
RF OUT
32(24)
RF OUT
ANT.IN
32(24)
40(27)
IN
OUT
40(27)
AUDIO
OUT
K
G
AUDIO
VIDEO
K
G
ANT.IN
VIDEO
002
002
Audio/Video signals
VIDEO CHANNEL
TV
Receiver
Audio/Video signals
Recorder
RF OUT
ANT.IN
AUD
RF OUT
32(24)
IN
OUT
40(27)
AUDIO
K
G
Recorder
ANT.IN
VIDEO
002
STANDBY/ON
NTSC
PLAYBACK
ON PAL TV
VIDEO
AUDIO
SP/LP/EP
B.E.S.T POWER-ON LP EP
/
NTSC 3.58/4.43
G, RECORDING
NTSC PLAYBACK ON PAL TV
NTSC
4.43
PAL
B
/
D
/
K
MESECAM
B
/
G,
D
/
K
B.E.S.T.
PAL NTSC
STANDBY / REC
NTSC 3.58
TV
Receiver
VIDEO CHANNEL
Notes:
1 Ctootnhneercetctohredpelra’syeArU’sDAIOUDaInOdaVnIdDEVOIDEINOcOonUnTecctoonrns.ectors
2 Put the player in the Play mode.
• NTSCtapesbeingplayedbackintheNTSCPLAYBACKON
PAL TV mode cannot be dubbed to another recorder.
• When you dub an NTSC tape using your recorder as the
playback deck, select NTSC 3.58 (or 4.43) with the Colour
System Output switch.
3 Put the recorder in the Record mode.
Important:
7 To edit, both the player and the recorder must be of the
same colour system. Press your recorder’s Colour sys-
tem switch to select the appropriate colour system.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Specifications
Format................................ VHS Standard
Video recording system ..... Rotary, slant azimuth two-head
helical scan system
Rotary heads...................... 2 video heads
RF output ........................... System G/K type modulation
UHFch32–40adjustable(preset
ch 36)
Problem
Check point
Is the power cord plugged
in?
No power
Is the power turned on?
Tape cannot be ejected
No picture
Was the video cassette
player’s§buttonpressed?
Is the TV set to the video
channel?
Is a cassette loaded?
Aretheconnectionscorrect?
Recording (line input) ......... PAL, SECAM (MESECAM tape)
NTSC 3.58, NTSC 4.43
Playback (line output) ........ PAL, SECAM (MESECAM tape)
NTSC 3.58
NTSC 4.43
Simulated PAL (NTSC tape)
No colour
Set the Colour System Out-
put switch according to the
recorded tape system.
Video
Line input level ................. 0.5 – 2.0 Vp-p/75 ohms, unbal-
Shuttle search does not Is the video cassette player
function
in the playback mode?
Disturbances in playback Istrackingadjustedproperly?
anced
Line output level............... 1.0 Vp-p/75 ohms, unbalanced
S/N ratio ........................... More than 45 dB
Horizontal resolution ........ More than 250 lines
(PAL/MESECAM)
picture
Is the TV adjusted properly?
Install this VCP a little way
apart from the TV set.
More than 220 lines (NTSC)
Remote control does not The batteries are weak.
function
Replace the batteries.
Auto playback does not The video cassette’s record-
Audio
Line input level ................. –8 dBm/50 k ohms, unbalanced
Line output level............... –6 dBm/1 k ohm, unbalanced
Frequency response ........ 70 Hz to 10,000 Hz (Normal)
function
ing safety tab has not been
removed.
Recording does not func- Aretheconnectionscorrect?
FF, REW time .................... Approx. 3 min. with E-180
cassette
tion
Was the Record button
pressed?
The video cassette’s record-
ing safety tab is removed.
Power requirements
Rating .............................. AC 110 – 240 V, 50/60 Hz
Operating ......................... AC 90 – 260 V, 50/60 Hz
The video cassette player Microcomputer malfunction.
doesnotfunctionproperly Disconnect the power plug
from the AC outlet and then
Power consumption ........... 13 W
re-insert it.
The microcomputer will be
reset to its initial mode.
Operation temperature ....... 5°C to 40°C
Dimensions ........................ [HP-JP400K]
400 (W) × 94 (H) × 288 (D) mm
[HP-JP200A]
400 (W) × 94 (H) × 280 (D) mm
Weight ................................ 3.1 kg
About Head cleaning
Standard accessories
Remote control unit ...............................................................1
Batteries for remote control...................................................2
RF antenna cable..................................................................1
Microphone (HR-JP400K only) .............................................1
Conversion plug ....................................................................1
7 If the picture playback becomes blurred, it does not mean
that the recorded program has been erased.
7 Dirt accumulated on the video heads after long periods of
use causes such troubles. In this case, head cleaning
requiring highly technical care is necessary.
7 For head cleaning, consult the nearest JVC dealer.
• Design and specifications subject to change without notice.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
|