JVC Stereo System UX V20R UX V10 User Manual

MICRO COMPONENT SYSTEM  
MIKRO-KOMPONENTEN-SYSTEM  
SYSTEME DE MICROCOMPOSANTS  
MIKRO KOMPONENTENSYSTEEM  
SYSTEMAS DE MICROCOMPONENTES  
SISTEMA A MICROCOMPONENTI  
UX-V20R/UX-V10  
COMPACT  
COMPACT  
DIGITAL AUDIO  
DIGITAL AUDIO  
VERTICAL DISC  
LOADING MECHANISM  
VERTICAL DISC  
LOADING MECHANISM  
FM  
AUTO  
SLEEP  
AUX  
DISPLAY  
TAPE  
MODE  
PRESET  
MICRO COMPONENT SYSTEM UX-V20R  
FM  
AUTO  
MICRO COMPONENT SYSTEM UX-V10  
SLEEP  
AUX  
DISPLAY  
TAPE  
MODE  
PRESET  
CD  
FM/AM  
CD  
FM/AM  
STANDBY  
CD  
AHB  
PRO  
STANDBY  
CD  
AUX  
REC  
AHB  
PRO  
AUX  
REC  
DISPLAY  
MODE  
VOLUME  
REPEAT  
PROGRAM  
PTY/EON  
UP  
VOLUME  
REPEAT  
PROGRAM  
UP  
TIMER  
SET  
TIMER  
SET  
RANDOM  
DOWN  
TREBLE  
REV  
MODE  
.
CLOCK  
RANDOM  
DOWN  
TREBLE  
REV.  
MODE  
CLOCK  
AHB  
PRO  
BASS  
CANCEL  
AHB  
PRO  
BASS  
CANCEL  
CD  
VOLUME  
OPEN/CLOSE  
CD  
VOLUME  
OPEN/CLOSE  
TAPE  
FM/AM  
CD  
TAPE  
FM/AM  
CD  
PHONES  
REMOTE CONTROL RM-SUXV20R  
PHONES  
REMOTE CONTROL RM-SUXV10E  
DOWN  
MULTI CONTROL  
UP  
DOWN  
MULTI CONTROL  
UP  
UX-V20R  
UX-V10  
INSTRUCTIONS  
For Customer Use:  
Enter below the Model No. and Serial No.  
which are located either on the rear, bot-  
tom or side of the cabinet. Retain this  
information for future reference.  
BEDIENUNGSANLEITUNG  
MANUEL D’INSTRUCTIONS  
GEBRUIKSAANWIJZING  
MANUEL DE INSTRUCCIONES  
ISTRUZIONI  
Model No.  
Serial No.  
GVT0031-006A  
[E]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caution: Proper Ventilation  
To avoid risk of electric shock and fire, and to prevent damage, locate  
the apparatus as follows:  
Voorzichtig: Goede ventilatie vereist  
Om brand, elektrische schokken en beschadiging te voorkomen, moet  
u het toestel als volgt opstellen:  
1 Front:  
1 Voorkant:  
No obstructions and open spacing.  
2 Sides/ Top/ Back:  
Geen belemmeringen en voldoende ruimte.  
2 Zijkanten/boven-/onderkant:  
No obstructions should be placed in the areas shown by the  
dimensions below.  
Geen belemmeringen plaatsen in de hieronder aangegeven zones.  
3 Onderkant:  
3 Bottom:  
Op vlakke ondergrond plaatsen. Voldoende ventilatieruimte voorzien  
door het toestel op een onderstel met een hoogte van 10 cm of  
meer te plaatsen.  
Place on the level surface. Maintain an adequate air path for  
ventilation by placing on a stand with a height of 10 cm or more.  
Vorsicht: Ausreichende Belüftung  
ZurVermeidungvonelektrischenSchlägen,FeuerundsonstigenSchäden  
sollte das Gerät unter folgenden Bedingungen aufgestellt werden:  
1 Vorderseite:  
Precaucion: ventilación correcta  
Para evitar el riesgo de descargas eléctricas e incendio y prevenir  
posibles daños, instale el equipo en un lugar que cumpla los siguientes  
requisitos:  
Hindernisfrei und gut zugänglich.  
1 Parte frontal:  
2 Seiten- und Rückwände:  
Sin obstrucciones, espacio abierto.  
Hindernisfrei in allen gegebenen Abständen (s. Abbildung).  
3 Unterseite:  
2 Lados/parte superior/parte posterior:  
No debe haber ninguna obstrucción en las áreas mostradas por las  
dimensiones de la siguiente figura.  
3 Parte inferior:  
Die Stellfläche muß absolut eben sein. Sorgen Sie für ausreichende  
Luftzufuhr durch Aufstellung auf einem Stand mit mindestens 10 cm  
Höhe.  
Sitúe el equipo sobre una superficie nivelada. Mantenga un espacio  
adecuado para permitir el paso del aire y una correcta ventilación,  
situando el equipo sobre un soporte de 10 o más cm de allura.  
Attention: Aération correcte  
Attenzione: Per una corretta ventilazione  
Per prevenire il rischio di scosse elettriche e di incendio ed evitare  
possibili danni, collocare le apparecchiature nel modo seguente:  
1 Parte anteriore:  
Pour prévenir tout risque de décharge électrique ou d’incendie et éviter  
toute détérioration, installez l’appareil de la manière suivante:  
1 Avant:  
Bien dégagé de tout objet.  
Nessun ostacolo e spazio libero.  
2 Côtés/dessus/dessous:  
2 Lati/Parte superiore/Retro:  
Assurez-vous que rien ne bloque les espaces indiqués sur le  
schéma ci-dessous.  
Lasciare libere le zone indicate dalle dimensioni di seguito.  
3 Base:  
3 Dessous:  
Collocare su una superficie piana. Consentire un’adeguata  
ventilazionedell’impiantoappoggiandolosuuntavolinettoaltoalmeno  
10 cm.  
Posez l’appareil sur une surface plane et horizontale. Veillez à ce  
que sa ventilation correcte puisse se faire en le plaçant sur un sup-  
port d’au moins dix centimètres de hauteur.  
Front view  
Vorderansicht  
Face  
Side view  
Seitenansicht  
Côté  
Vooraanzicht  
Zijaanzicht  
Vista frontal  
Vista frontale  
Vista lateral  
Vista laterale  
15 cm  
15 cm  
COMPACT  
DIGITAL AUDIO  
15 cm  
VERTICAL DISC  
LOADING MECHANISM  
UX-V20R  
MICRO COMPONENT SYSTEM UX-V20R  
UX-V10  
1 cm  
1 cm  
15 cm  
10 cm  
15 cm  
TAPE  
FM/AM  
CD  
UX-V20R/UX-V10  
G-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT FOR LASER PRODUCTS / WICHTIGER HINWEIS FÜR LASER-PRODUKTE / IMPORTANT POUR LES PRODUITS LASER /  
BELANGRIJKE INFORMATIE VOOR LASERPRODUKTEN / IMPORTANTE PARA LOS PRODUCTOS LÁSER / IMPORTANTE PER I  
PRODOTTI LASER  
REPRODUCTION OF LABELS/ANBRINGUNGSORTE FÜR LASER-PRODUKTE/REPRODUCTION DES ETIQUETTES/VERKLARING VAN  
DE LABELS/REPRODUCCIÓN DE ETIQUETAS/RIPRODUZIONE DELLE ETICHETTE  
1
1
1
CLASSIFICATION LABEL, PLACED ON REAR ENCLOSURE  
KLASSIFIKATIONSETIKETTE AN DER RÜCKSEITE  
2
2
2
WARNING LABEL, PLACED INSIDE THE UNIT  
WARNETIKETTE IM GERÄTEINNEREN  
ETIQUETTE DE CLASSIFICATION, PLACÉE A L'ARRIÈRE DU  
COFFRET  
ETIQUETTE D'AVERTISSEMENT PLACÉE À L'INTERIEUR DE  
L'APPAREIL  
1
1
1
KLASSIFIKATIELABEL, OP DE ACHTERZIJDE VAN HET  
APPARAAT  
2
2
2
WAARSCHUWINGSLABEL, IN HET APPARAAT  
ETIQUETA DE CLASIFICACIÓN, PEGADA EN LA PARTE  
POSTERIOR DE LA CAJA  
ETIQUETA DE ADVERTENCIA, PEGADA EN EL INTERIOR DE  
LA UNIDAD  
ETICHETTA DI CLASSIFICAZIONE, SITUATA SUL  
RIVESTIMENTO POSTERIORE  
ETICHETTA DI AVVERTENZA, SITUATA ALL'INTERNO  
DELL'APPARECCHIO  
DANGER: Invisible laser VARNING: Osynlig laser-  
radiation when open and strålning när denna del är  
interlock failed or defeated. öppnad och spärren är  
AVOID DIRECT EXPOSURE urkopplad. Betrakta ej  
ADVARSEL: Usynlig laser-  
stråling ved åbning, når  
sikkerhedsafbrydere er ude  
af funktion. Undgå udsæt-  
VARO: Avattaessa ja suo-  
jalukitus ohitettaessa olet  
alttiina näkymättömälle  
lasersäteilylle. Älä katso  
CLASS  
LASER  
1
(e)  
(s)  
(d)  
(f)  
TO BEAM.  
strålen.  
telse for stråling  
säteeseen.  
PRODUCT  
1. CLASS 1 LASER PRODUCT  
2. DANGER: Invisible laser radiation when open and interlock failed  
or defeated. Avoid direct exposure to beam.  
3. CAUTION: Do not open the top cover. There are no user service-  
able parts inside the Unit; leave all servicing to qualified service  
personnel.  
1. KLAS 1 LASERPRODUKT  
2. GEVAARLIJK: Onzichtbare laserstraling wanneer open en de  
beveiliging faalt of uitgeschakeld is. Voorkom het direkt  
blootstaan aan de straal.  
3. VOORZICHTIG: De bovenkap niet openen. Binnenin het toestel  
bevinden zich geen door de gebruiker te repareren onderdelen:  
laat onderhoud over aan bekwaam vakpersoneel.  
1. LASER-PRODUKT DER KLASSE 1  
1. PRODUCTO LASER CLASE 1  
2. PELIGRO: En el interior hay radiación láser invisible. Evite el  
contacto directo con el haz.  
3. PRECAUCIÓN: No abra la tapa superior. En el interior de la  
unidad no existen piezas reparables por el usuario; deje todo  
servicio técnico en manos de personal calificado.  
2. GEFAHR: Unsichtbare Laserstrahlung bei Öffnung und  
fehlerhafter oder beschädigter Spre. Direkten Kontakt mit dem  
Strahl vermeiden!  
3. ACHTUNG: Das Gehäuse nicht öffnen. Das Gerät enthält  
keinerlei Teile, die vom Benutzer gewartet werden können.  
Überlassen Sie Wartungsarbeiten bitte qualifizierten  
Kundendienst-Fachleuten.  
1. PRODUIT LASER CLASSE 1  
1. PRODOTTO LASER CLASSE 1  
2. ATTENTION: Radiation laser invisible quand l'appareil est ouvert  
ou que le verrouillage est en panne ou désactivé. Eviter une  
exposition directe au rayon.  
2. PERICOLO: Radiazione laser invisibile quando l'apparecchio è aperto  
ed il dispositivo di sicurezza è guasto o disattivato. Evitare  
l'esposizione diretta ai raggi.  
3. ATTENTION: Ne pas ouvrir le couvercle du dessus. Il n'y a  
aucune pièce utilisable à l'intérieur. Laisser à un personnel  
qualifié le soin de réparer votre appareil.  
3. ATTENZIONE: Non aprire il coperchio superiore. Non vi sono parti  
adoperabili dall'utente all'interno di questo apparecchio; lasciare tutti i  
controlli a personale qualificato.  
G-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Thank you for purchasing the JVC Micro Component System.  
We hope it will be a valued addition to your home, giving you years of enjoyment.  
Be sure to read this instruction manual carefully before operating your new stereo system.  
In it you will find all the information you need to set up and use the system.  
If you have any query that is not answered by the manual, please contact your dealer.  
Features  
Here are some of the things that make your System both powerful and simple to use.  
The controls and operations have been designed to make them very easy to use, freeing you to just enjoy the music.  
With JVC’s COMPU PLAY you can turn on the System and automatically start the Radio, Cassette deck or CD  
Player with a single touch.  
The System incorporates Active Hyper Bass PRO circuitry to faithfully reproduce low frequency sounds.  
Forty-five-station preset capability (30 FM and 15 AM (MW/LW)) in addition to auto-seek and manual tuning.  
Versatile CD options include repeat, random and program play.  
Timer functions; Daily Timer, Recording Timer and Sleep Timer.  
Auto-reverse tape function.  
The System is compatible with RDS (Radio Data System) broadcasting. (ONLY FOR UX-V20R.)  
The EON data enables you to standby for desired information.  
The PTY Search function searches for programs in the category you wish.  
In addition, Radio Text can be displayed using data sent by station.  
You can connect an audio equipment — used only as a playback device.  
How This Manual Is Organized  
Basic information that is the same for many different functions – e.g. setting the volume – is given in the section “Common Opera-  
tions”, and not repeated under each function.  
The names of buttons/controls and display messages are written in all capital letters: e.g. TAPE, “NO DISC”.  
The illustrations used in this manual are of UX-V20R.  
IMPORTANT PRECAUTIONS  
1 Installation of the System  
Select a place which is level, dry and neither too hot nor too cold. (Between 5°C and 35°C.)  
Leave sufficient distance between the System and a TV.  
Do not use the System in a place subject to vibrations.  
2 Power cord  
Do not handle the power cord with wet hands!  
Some power is always consumed as long as the power cord is connected to the wall outlet.  
When unplugging the System from the wall outlet, always pull the plug, not the power cord.  
3 Malfunctions, etc.  
There are no user serviceable parts inside. In case of a system failure, unplug the power cord and consult your dealer.  
Do not insert any metallic object into the System.  
Table of Contents  
Features.................................................................................. 1 Using the Cassette Deck (Recording) ................... 16  
How This Manual Is Organized............................................. 1  
IMPORTANT PRECAUTIONS ............................................ 1  
Using External Equipment.......................................18  
Using the Timers ......................................................19  
Care and Maintenance .............................................22  
Troubleshooting .......................................................23  
Specifications ...........................................................24  
Getting Started ...........................................................2  
Common Operations ..................................................6  
Using the Tuner ..........................................................8  
Using the CD Player .................................................12  
Using the Cassette Deck (Listening to a Tape) ..... 15  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Accessories  
Make sure that you have all of the following items, which are supplied with the System.  
AC Power Cord (1)  
AM Loop Antenna (1)  
Remote Control (1)  
Batteries (2)  
FM Wire Antenna (1)  
If any of these items are missing, contact your dealer immediately.  
How to Put Batteries in the Remote Control  
Match the polarity (+ and –) on the batteries with the + and – markings in the battery compartment.  
R6(SUM-3)/AA(15F)  
CAUTION: Handle batteries properly.  
To avoid battery leakage or explosion:  
Remove batteries when the Remote Control will not be used for a long time.  
When you need to replace the batteries, replace both batteries at the same time with new ones.  
Do not use an old battery with a new one.  
Do not use different types of batteries together.  
Using the Remote Control  
The Remote Control makes it easy to use many of the functions of the System from a distance of up to 7 m away.  
You need to point the Remote Control at the remote sensor on the System’s front panel.  
COMPACT  
DIGITAL AUDIO  
VERTICAL DISC  
LOADING MECHANISM  
MICRO COMPONENT SYSTEM UX-V20R  
STANDBY  
AHB  
PRO  
AUX  
REC  
VOLUME  
TIMER  
REV.  
MODE  
CLOCK  
CD  
OPEN/CLOSE  
Remote sensor  
TAPE  
FM/AM  
CD  
PHONES  
DOWN  
MULTI CONTROL  
UP  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION: Make all connections before plugging the System into an AC power outlet.  
Connecting the FM Antenna  
Using the supplied Wire Antenna  
Rear Panel of the Unit  
FM Wire Antenna  
(supplied)  
R
L
Using the coaxial type connector  
(not supplied)  
A 75 antenna with coaxial type connector (IEC or DIN 45325)  
should be connected to the FM (75 ) COAXIAL terminal.  
L
R
SPEAKERS  
IMPEDANCE  
MIN 4  
If reception is poor, connect the outdoor antenna.  
AC IN  
FM outdoor antenna  
(not supplied)  
Coaxial cable  
Note: Before attaching a 75 coaxial lead (the kind with a  
round wire going to an outdoor antenna), disconnect the  
supplied FM Wire Antenna.  
Connecting the AM (MW/LW) Antenna  
AM Loop Antenna (supplied)  
Rear Panel of the Unit  
R
L
L
Attach the AM loop to its base by snapping the tabs on the loop  
into the slot in the base.  
R
SPEAKERS  
IMPEDANCE  
MIN 4Ω  
ANTENNA  
AM EXT  
AM LOOP  
AC IN  
FM (75)  
COAXIAL  
CAUTION:  
To avoid noise, keep antennas away from the  
System, the connecting cord and the AC power  
cord.  
Turn the loop until you have the best reception.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION: Make all connections before plugging the System into an AC power outlet.  
Connecting the Speakers  
For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the System.  
1. Open each of the terminals and insert the speaker wires firmly, then close the terminals.  
2. Connect the red (+) and black (–) wires of the right side speaker to the red (+) and black (–) terminals marked R on the System.  
Connect the red (+) and black (–) wires of the left side speaker to the red (+) and black (–) terminals marked L on the System.  
Right speaker (rear side)  
Left speaker (rear side)  
Black  
L
R
SPEAKERS  
IMPEDANCE  
MIN 4  
CAUTION:  
If a TV is installed near the speakers, the picture on the TV may be distorted. If this happens, set the  
speakers away from the TV.  
Connecting External Equipment  
You can connect an audio equipment — used only as a playback device.  
Connect the audio output terminals on the other equipment and the LINE IN (AUX) terminals on the rear, using an audio cord (not supplied).  
Pin-plug x 2  
Pin-plug x 2  
To audio output  
Signal cord (not supplied)  
MD recorder or  
R
L
cassette deck (not supplied)  
LINE IN  
(AUX)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the AC Power Cord  
Firmly insert the supplied AC power cord into the AC inlet on the back of the Unit.  
AC IN  
AC power cord  
CAUTIONS:  
ONLY USE JVC POWER CORD PROVIDED WITH THIS SYSTEM TO AVOID MALFUNCTION OR DAMAGE  
TO THE SYSTEM.  
BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN YOU ARE GOING OUT OR WHEN  
THE SYSTEM IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME.  
Now you can plug the AC power cord into the wall outlet, and your System is at your command!  
COMPU PLAY  
The JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single touch.  
With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external equipment at a single press of the play button  
for that function. One Touch Operation turns the power on for you, then starts the function you have specified.  
How One Touch Operation works in each case is explained in the section dealing with that function.  
The COMPU PLAY buttons are:  
On the Unit  
CD #/8 button  
FM/AM button  
TAPE @ # button  
AUX button  
On the Remote Control  
CD #/8 button  
FM/AM button  
TAPE @ # button  
AUX button  
AUTOMATIC POWER ON  
The System automatically turns on with the following operation.  
When you press the CD OPEN/CLOSE 0 button on the Unit (or CD 0 button on the Remote Control), the System automatically turns  
on and the CD cover opens to allow CD insertion. However, this operation does not change the source to CD.  
When you press the  
button to turn on or off the System, the CD cover will automatically close if it is open.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Common Operations  
FM  
AUTO  
SLEEP  
AUX  
DISPLAY  
TAPE  
MODE  
PRESET  
DISPLAY  
UP  
CD  
FM/AM  
8
¥
CD  
DISPLAY  
MODE  
STANDBY  
REPEAT  
PROGRAM  
PTY/EON  
UP  
AHB  
PRO  
STANDBY lamp  
PHONES  
AUX  
REC  
VOLUME  
AHB PRO  
VOLUME +, –  
CLOCK  
SET  
TIMER  
REV  
RANDOM  
DOWN  
TREBLE  
MODE  
CLOCK  
BASS  
AHB PRO  
DOWN  
AHB  
PRO  
CD  
OPEN/CLOSE  
BASS  
CANCEL  
TAPE  
FM/AM  
CD  
PHONES  
VOLUME  
TREBLE  
DOWN  
MULTI CONTROL  
UP  
VOLUME +, –  
REMOTE CONTROL RM-SUXV20R  
Turning the Power On and Off  
Adjusting the Volume  
Press the VOLUME + button to increase the volume or press the  
VOLUME – button to decrease it.  
Turning the System on –––––––––––––––  
Press the  
button.  
SLEEP  
The STANDBY lamp goes out.  
The System comes on ready to play the source it was for when the  
power was last turned off.  
For example, if the last thing you were doing was listening to a  
CD, you are now ready to listen to a CD again. If you wish,  
you can change to another source.  
You can adjust the volume level between 0 and 40.  
If you were listening to the Tuner last, the Tuner comes on  
playing the station it was last set to.  
CAUTION:  
DO NOT turn off (on standby) the Unit with the  
volume set to an extremely high level; otherwise  
a sudden blast of sound could damage your  
hearing, speakers and/or headphones when you  
turn on the Unit or start playing any source next  
time.  
Turning the System off––––––––––––––  
Press the  
button again.  
The STANDBY lamp lights up.  
Some power is always consumed even though power is turned  
off (called Standby Mode).  
To switch off the System completely, unplug the AC power  
cord from the wall outlet. When you unplug the AC power  
cord, the clock will be reset to 0:00.  
REMEMBER you cannot adjust the volume level  
while the Unit is on standby.  
For private listening  
Connect a pair of headphones to the PHONES jack. No sound  
comes out of the speakers.  
Be sure to turn down the volume before connecting or putting on  
headphones.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Showing the Clock Time  
In Standby mode, the digital clock appears on the display.  
Reinforcing the Bass Sound  
(AHB PRO)  
You can reinforce the bass sound to maintain rich, full bass at low  
volume (you can use this effect only for playback):  
To get the effect, press the AHB (Active Hyper Bass) PRO  
button.  
The BASS indicator lights up on the display.  
To cancel the effect, press the button again.  
The BASS indicator goes out.  
When the System is turned on, you can display the digital clock  
any time.  
To display the digital clock, press the CLOCK button on the  
Unit or DISPLAY button on the Remote Control.  
Controlling the Tone (Bass/  
Treble)  
To return to the previous mode, press the same button again.  
You can control the tone by changing the bass and treble.  
Note: To let the clock work, you need to set the clock beforehand.  
(See “Setting the Clock” on page 19.)  
Adjusting the bass level –––––––––––––  
You can adjust the bass level (low frequency range level) between  
–5 and +5. (0: Flat)  
1 Press the BASS button on the Remote  
Control.  
2 Press the UP or DOWN button on the  
Remote Control to adjust the bass level.  
BASS  
DOWN  
UP  
or  
Adjusting the treble level ––––––––––––  
You can adjust the treble level (high frequency range level)  
between –5 and +5. (0: Flat)  
1 Press the TREBLE button on the Remote  
Control.  
2 Press the UP or DOWN button on the  
Remote Control to adjust the treble level.  
TREBLE  
DOWN  
UP  
or  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Tuner  
STANDBY  
AHB  
PRO  
AUX  
VOLUME  
REC  
TIMER  
REV  
CLOCK  
MODE  
FM MODE  
AUTO PRESET  
FM  
MODE  
AUTO  
PRESET  
CD  
SLEEP  
AUX  
DISPLAY  
TAPE  
OPEN/CLOSE  
TAPE  
FM/AM  
CD  
CD  
PHONES  
FM/AM  
FM/AM  
DOWN  
MULTI CONTROL  
UP  
FM/AM  
¢
DISPLAY MODE*  
>
SET  
CD  
¢
4
*PTY/EON  
<
DISPLAY  
MODE  
REPEAT  
PROGRAM  
PTY/EON  
UP  
4
SET  
RDS indicators (ONLY FOR UX-V20R)  
RANDOM  
DOWN  
TREBLE  
UP  
AHB  
PRO  
BASS  
CANCEL  
DOWN  
FM mode indicators  
MONO STEREO  
EON TA NEWS INFO  
VOLUME  
REMOTE CONTROL RM-SUXV20R  
* ONLY FOR UX-V20R  
Band display, Frequency  
display, Preset channel  
When the System is in use, the display shows other items as well.  
For simplicity, only the items described in this section are shown here.  
You can listen to FM and AM (MW/LW) stations. Stations can be  
tuned in manually, automatically, or from preset memory storage.  
Before listening to the radio:  
OR  
Preset Tuning using the Remote Control (Possible  
only after presetting stations)  
Make sure that both the FM and AM (MW/LW) antennas  
Select the desired preset number using the UP, DOWN, > or <  
button on the Remote Control. After 1 second the display will  
show the preset number’s band and frequency.  
Example: Press the UP button until the preset number 12  
“P-12” appears.  
are correctly connected. (See page 3.)  
One touch radio ––––––––––––––––––––––  
Just press the FM/AM button to turn on the System and start  
playing the station you were last tuned to.  
UP  
DOWN  
You can switch from any other sound source to the radio by  
pressing the FM/AM button.  
or  
(After 1 second)  
Presetting Stations  
You can preset up to 30 FM stations and up to 15 AM (MW/LW)  
Tuning In a Station  
stations using the Remote Control.  
1 Press the FM/AM button.  
The band and frequency you were last tuned to appear on the  
display.  
Note: Preset numbers may have been set to factory test frequen-  
cies prior to shipment. This is not a malfunction. You can  
preset the stations you want into memory by following one  
of the presetting methods below.  
(If the last station was selected using the preset number, the  
preset number appears first.)  
Each time you press the button, the band alternates between  
FM and AM (MW/LW).  
Presetting stations manually ––––––––  
UP  
FM/AM  
SET  
SET  
STORED  
SET  
FM/AM  
FM/AM  
FM  
AM  
FM  
AM  
DOWN  
or  
(On the Unit)  
(On the Remote Control)  
(Within 5 seconds)  
FM = 30, AM = 15  
2 Select a station using one of the follow-  
ing methods.  
When changing the Band  
Manual Tuning  
1 Select a band by pressing the FM/AM  
button.  
Press the 4 or ¢ button repeatedly to move from fre-  
quency to frequency until you find the station you want.  
OR  
2 Press the 4 or ¢ button to tune in a  
Auto Tuning  
station.  
If you press and hold the 4 or ¢ button for one second or  
more, the frequency changes down, or up, automatically until a  
station is found.  
3 Press the SET button.  
“SET” will flash for 5 seconds.  
Within 5 seconds, proceed to the next step.  
When the display returns to the one set in Step 2 after 5  
seconds, press the SET button again.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Press the UP, DOWN, > or < button within  
5 seconds to select the preset number.  
Receiving FM Stations with  
RDS  
ONLY FOR UX-V20R  
You can use the RDS (Radio Data System) by using the buttons on  
the Unit and the Remote Control.  
UP or > button:  
Increases the preset number by 1.  
DOWN or < button: Decreases the preset number by 1.  
When the > or < button is held down, the preset number  
changes rapidly.  
RDS allows FM stations to send additional signals with their  
regular program signals. For example, the stations send their station  
names, and information about what type of programs they  
broadcast, such as sports or music, etc. This Unit can receive the  
following types of RDS signals:  
5 Press the SET button within 5 seconds.  
“STORED” appears and after 2 seconds, the display returns to  
the broadcast frequency display.  
6 Repeat above steps 1 to 5 for each sta-  
tion you want to store in memory with a  
preset number.  
PS (Program Service):  
shows commonly known station names.  
PTY (Program Type):  
To change the preset stations, repeat the same steps as above.  
shows types of broadcast programs.  
RT (Radio Text):  
shows text messages the station sends.  
EON (Enhanced Other Networks):  
provides the information about the types of the programs sent by  
other RDS stations.  
Presetting stations automatically –––  
In each band, you can automatically preset 30 FM and 15 AM  
(MW/LW) stations. Preset numbers will be allocated as stations are  
found, starting from the lowest frequency and moving up the  
frequency.  
AUTO  
PRESET  
What information can RDS signals provide?  
FM/AM  
The display shows RDS signal information that the station sends.  
(For more than 2 seconds)  
Showing the RDS signals on the  
display–––––––––––––––––––––––––––––––  
1 Select a band by pressing the FM/AM  
button.  
Press the DISPLAY MODE button on the  
Remote Control while listening to an FM  
station.  
2 Press the AUTO PRESET button on the  
Remote Control for more than 2 seconds.  
Each time you press the button, the display changes to show  
information in the following order:  
3 Repeat steps 1 – 2 for the other band.  
If you want to change the preset stations, carry out the Manual  
Presetting for the desired preset numbers.  
DISPLAY  
MODE  
PS  
PTY  
RT  
Frequency  
CAUTION:  
Even if the system is unplugged or if a power  
failure occurs, the preset stations will be stored  
for about 24 hours. However, in case the preset  
stations are erased, you will need to preset the  
stations again.  
PS (Program Service):  
While searching, “PS” appears, then station name is displayed.  
“NO PS” appears if no signal is sent.  
PTY (Program Type):  
While searching, “PTY” appears, then broadcast program type is  
displayed. “NO PTY” appears if no signal is sent.  
RT (Radio Text):  
While searching, “RT” appears, then a text message sent by the  
station is displayed. “NO RT” appears if no signal is sent.  
Frequency:  
Changing the FM Reception  
Mode  
When you have tuned into an FM stereo broadcast, the STEREO  
indicator lights up and you can hear stereo effects.  
If an FM stereo broadcast is hard to receive or noisy, you can select  
Monaural mode. Reception improves, but you lose any stereo  
effect.  
Station frequency (non-RDS service)  
To search for a program using the PTY codes  
REMEMBER you must preset FM RDS stations to use the EON  
function. If not yet done, see page 8.  
Notes:  
Press the FM MODE button on the Remote  
Control so that the MONO indicator lights up  
on the display.  
If searching finishes at once, “PS”, “PTY” and “RT” will not  
appear on the display.  
If you press the DISPLAY MODE button while listening to an  
AM (MW/LW) station, the display only shows station  
frequency.  
FM  
MODE  
RDS is not available for AM (MW/LW) broadcasts and for  
some FM broadcasts.  
STEREO  
MONO  
To restore the stereo effect, press the FM MODE button on  
the Remote Control so that the MONO indicator goes off.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
On characters displayed  
Descriptions of the PTY Codes  
When the display shows PS, PTY or RT signals:  
NEWS:  
News  
The display shows upper case letters only.  
The display cannot show accented letters; For example, “A”  
may represent accented “A’s” like “Á, Â, Ã, À, Ä and Å”.  
AFFAIRS:  
Topical program expanding on the current news or  
affairs  
Programs on medical service, weather forecasts, etc.  
Sports events  
INFO:  
SPORT:  
EDUCATE: Educational programs  
DRAMA: Radio plays  
CULTURE: Programs on national or regional culture  
Searching for a program by PTY  
codes –––––––––––––––––––––––––––––––––  
One of the advantages of the RDS service is that you can locate a  
particular kind of program by specifying the PTY codes.  
SCIENCE:  
VARIED:  
POP M:  
Programs on natural sciences and technology  
Other programs like comedies or ceremonies  
Pop music  
To search for a program using PTY or TA codes:  
UP  
ROCK M:  
M.O.R.M:  
Rock music  
Middle-of-the-road music (usually called “easy  
DOWN  
listening”)  
PTY/EON  
PTY/EON  
(On the Remote Control)  
LIGHT M:  
CLASSICS: Classical music  
OTHER M: Other music  
Light music  
or  
DOWN  
UP  
WEATHER: Weather information  
(On the Unit)  
FINANCE:  
Reports on commerce, trading, the Stock Market, etc.  
1
Press the PTY/EON button on the Remote  
Control once while listening to an FM  
station.  
CHILDREN: Entertainment programs for children  
SOCIAL A: Programs on social activities  
RELIGION: Programs dealing with any aspect of belief or faith,  
or the nature of existence or ethics  
The display alternates between “PTY ” and “SELECT”.  
PHONE IN: Programs where people can express their views  
either by phone or in a public forum  
2 Select the PTY code using the 4 or ¢  
button on the Unit (or the UP or DOWN  
button on the Remote Control) within 10  
seconds.  
TRAVEL:  
LEISURE:  
JAZZ:  
Programs about travel destinations, package tours,  
and travel ideas and opportunities  
Programs concerned with recreational activities  
such as gardening, cooking, fishing, etc.  
Jazz music  
Each time you press the button, the display shows a category in  
the following order:  
COUNTRY: Country music  
NATIONAL: Current popular music from another nation region,  
in that country’s language  
NEWS Ô AFFAIRS Ô INFO Ô SPORT Ô EDUCATE Ô  
DRAMA Ô CULTURE Ô SCIENCE Ô VARIED Ô POP M  
Ô ROCK M Ô M.O.R.M Ô LIGHT M Ô CLASSICS Ô  
OTHER M Ô WEATHER Ô FINANCE Ô CHILDREN Ô  
SOCIAL A Ô RELIGION Ô PHONE IN Ô TRAVEL Ô  
LEISURE Ô JAZZ Ô COUNTRY Ô NATIONAL Ô OLDIES  
Ô FOLK M Ô DOCUMENT Ô TRAFFIC Ô NEWS  
OLDIES:  
FOLK M:  
Classic pop music  
Folk music  
DOCUMENT: Programs dealing with factual matters, presented in  
an investigative style  
TRAFFIC:  
Traffic announcement  
Classification of the PTY codes for some FM stations  
may be different from the above list.  
3 Press the PTY/EON button on the Remote  
Control again within 10 seconds.  
While searching, the display alternates between “SEARCH”  
and the selected PTY code.  
The Unit searched 30 preset stations and stops when it finds a  
station of the category you have selected, then tunes into that  
station.  
To continue searching after the first stop, press the PTY/  
EON button on the Remote Control again while the display  
indications are flashing.  
If no program is found, “NOTFOUND” appears on the display.  
To stop searching at any time during the process, press the  
PTY/EON button on the Remote Control.  
[Example]  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Case 2: If there is a station broadcasting the program  
type you have selected  
This Unit tunes to the station broadcasting the program. The  
program type (TA, NEWS or INFO) indicator starts flashing.  
Switching to a program type of your  
choice temporarily –––––––––––––––––––  
EON (Enhanced Other Networks) is another convenient RDS  
service that allows this Unit to switch temporarily to a broadcast  
program of your choice (NEWS, TA or INFO) from the currently  
selected station, except if you are listening to a non-RDS station  
(all AM (MW/LW) stations or some FM stations).  
When the program is over, this Unit goes back to the currently  
selected station, but still remains in EON Standby mode.  
Case 3: If the FM station you are listening to is broad-  
casting the program type you have selected  
The broadcast station being currently heard will continue to be  
heard. The program type (TA, NEWS or INFO) indicator starts  
flashing.  
The EON indicator lights up when tuned to a station which  
provides EON information.  
If an FM station does not broadcast EON information, EON  
cannot be activated.  
UP  
DOWN  
When the program is over, this Unit goes back to the currently  
selected station, but still remains in EON Standby mode.  
PTY/EON  
PTY/EON  
(On the Remote Control)  
or  
DOWN  
UP  
Notes:  
(On the Unit)  
If the EON is in standby mode and the source (CD, TAPE,  
AUX) is changed or the power is switched off, then the EON  
mode will be released. When the band is set to AM (MW/LW),  
the EON is not activated. When the band is set to FM again, the  
EON will be set to standby mode.  
1 Press the PTY/EON button on the Remote  
Control twice while listening to an FM  
station.  
The display alternates between “EON” and “SELECT.”  
When the EON is being operated (i.e. the selected program  
type is being received from the broadcast station) and if the  
DISPLAY MODE or 4, ¢ button (or the </>/DOWN/UP  
button on the Remote Control) is operated, the station will not  
switch back to the current selected station even after the  
program ends. The program type indicator remains in the  
display, indicating that the EON is in standby mode.  
When the EON is in standby mode and a radio broadcast is  
being recorded, be careful because the EON may be activated  
and a different program than the intended one may be recorded.  
When the EON mode is not required, release the EON mode.  
When the alarm signal is detected by EON, the station  
broadcasting the alarm is received with priority. “ALARM” is  
not displayed.  
2 Select the program type with the 4 or  
¢ button on the Unit (or the UP or  
DOWN button on the Remote Control)  
within 10 seconds.  
The display shows a program type in the following order:  
TA:  
NEWS:News  
Traffic Announcement  
INFO: Programs on medical service, weather forecast, etc.  
OFF: Canceled  
CAUTION:  
3 Press the PTY/EON button on the Remote  
Control again within 10 seconds to set  
the selected program type.  
When the sound alternated intermittently be-  
tween the station tuned in by the EON function  
and the current selected station, cancel the EON  
mode. This does not constitute malfunction of  
the Unit.  
The selected program type indicator lights up on the display,  
and the Unit enters EON Standby mode.  
Case 1: If there is no station broadcasting the program  
type you have selected  
The broadcast station being currently heard will continue to be  
heard.  
When a station starts broadcasting the program you have selected,  
this Unit automatically switches to the station. The program type  
(TA, NEWS or INFO) indicator starts flashing.  
When the program is over, this Unit goes back to the currently  
selected station, but still remains in EON Standby mode.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the CD Player  
COMPACT  
VERTICAL DISC  
LOADING MECHANISM  
CD Cover  
FM  
AUTO  
SLEEP  
AUX  
DISPLAY  
TAPE  
MODE  
PRESET  
7
MICRO COMPONENT SYSTEM UX-V20R  
CD  
FM/AM  
CD #¥8  
4
CD 0  
STANDBY  
AHB  
PRO  
AUX  
REC  
CD  
VOLUME  
¢
DISPLAY  
MODE  
TIMER  
REPEAT  
PROGRAM  
PTY/EON  
UP  
REV  
UP  
>
REPEAT  
CLOCK  
MODE  
SET  
CD OPEN/  
CD  
PROGRAM  
RANDOM  
<
OPEN/CLOSE  
TAPE  
FM/AM  
CD  
RANDOM  
DOWN  
TREBLE  
CLOSE 0  
PHONES  
SET  
CANCEL  
DOWN  
AHB  
PRO  
DOWN  
MULTI CONTROL  
UP  
BASS  
CANCEL  
CD #/8  
Track number, Playing time,  
Program order number  
VOLUME  
¢
7
REMOTE CONTROL RM-SUXV20R  
4
Music calendar  
OVER indicator  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15  
AALLLL OOVVEERR  
PROGRAM RANDOM  
Play mode indicator  
Repeat indicator  
When the System is in use, the display shows other items as well.  
For simplicity, only the items described in this section are shown here.  
Track number exceeding  
15 is not displayed.  
You can use Normal, Random, Program or Repeat Play. Repeat  
Play can repeat all the tracks or just one of the tracks on the CD.  
Here are the basic things you need to know to play a CD and locate  
the different tracks on it.  
3 Press the CD OPEN/CLOSE 0 button on  
the Unit (or the CD 0 button on the  
Remote Control) again to close the CD  
cover.  
To close the CD cover and play the CD, you can just press the  
CD #/8 button.  
You can place an 8 cm CD without an adaptor.  
When a CD with 16 tracks or more is loaded, the OVER  
indicator will light up on the display.  
The quickest way to start a CD is with the one touch  
operation  
Press the CD #/8 button on the Unit or the Remote Control.  
The power is automatically turned on. If a CD is already  
inserted, it will start playing from the first track.  
If no CD is inserted, “NO DISC” appears on the display and  
the CD Player remains in Stop mode.  
If the CD cannot be read correctly (because it is scratched, for  
example), “00 0000” appears on the display.  
You can insert a CD while listening to another source.  
CAUTIONS:  
Inserting a CD  
DO NOT try to open or close the CD cover by  
hand as it will be damaged.  
1 Press the CD OPEN/CLOSE 0 button on  
the Unit (or the CD 0 button on the  
Remote Control).  
When you place or take out a CD, do not let it  
fall. Be careful not to scratch your fingers  
with the CD cover.  
The CD cover opens.  
Unloading a CD  
Take out the CD as shown below.  
2 Place a CD, with its label side out as  
shown below. Press down on the portions  
around the CD’s center hole until you  
hear a click.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Press the PROGRAM button.  
The System enters the programing mode and the PROGRAM  
indicator lights up.  
Basics of Using the CD  
Player — Normal Play  
PROGRAM  
Playing a CD–––––––––––––––––––––––––  
PROGRAM RANDOM  
1 Insert a CD.  
5 Press the > or < button to select the track  
to program.  
> button: Increases the track number by 1.  
< button: Decreases the track number by 1.  
2 Press the CD #/8 button.  
The first track of the CD begins playing.  
When the > or < button is held down, the track number  
changes rapidly.  
Track number  
Playback time  
6 Press the SET button.  
The track number that has already played disappears from the  
music calendar.  
The CD Player automatically stops when the last track of the  
CD has finished playing.  
Program order number  
SET  
To stop playing the CD, press the 7 button.  
The following information for the CD is displayed.  
Total playback time of the  
programed tracks  
7 Repeat steps 5 and 6 to select the other  
Total track number  
Total playback time  
tracks for the program.  
You can see the total playback time of programed tracks on the  
display. You can also see the programed tracks on the music  
calendar.  
To stop playing and remove the CD, press the CD OPEN/  
CLOSE 0 button on the Unit or CD 0 button on the Remote  
Control to open the CD cover. Then remove the CD.  
To pause, press the CD #/8 button. The playback time flashes on  
the display.  
8 Press the CD #/8 button.  
The System plays the tracks in the order you have programed  
them.  
To cancel pause, press the same button again. Play continues  
from the point where it was paused.  
You can skip to a particular program track by pressing the 4  
or ¢ button (or the </>/DOWN/UP button on the Remote  
Control) during Program Play.  
To stop playing, press the 7 button once.  
To confirm the programed tracks while the CD player is  
stopped, press the PROGRAM button; the tracks making up the  
program will successively be displayed in the programed order.  
To delete all the tracks in the program while the CD  
player is stopped, press the 7 button. Pressing the CD 0 button  
on the Remote Control (or the CD OPEN/CLOSE 0 button on the  
Unit) to open the CD cover will also clear the programed tracks.  
To exit from the program mode while the CD player is  
stopped, press the 7 button to light off the PROGRAM indicator.  
All the programed tracks will be cleared.  
Selecting a track––––––––––––––––––––  
During playback, press the 4 or ¢ button (or the </>/DOWN/  
UP button on the Remote Control) to select the track you want.  
The selected track starts playing.  
Press the ¢ button (or the >/UP button on the Remote  
Control) once to skip to the beginning of the next track.  
Press the 4 button (or the </DOWN button on the  
Remote Control) to skip to the beginning of the track being  
played. Press twice quickly to skip to the beginning of the  
previous track.  
When the > or < button on the Remote Control is held  
down, the tracks are successively skipped.  
Selecting a passage within a track ––––  
Holding down the 4 or ¢ button (or the DOWN/UP button on  
the Remote Control), during playback, will fast-forward/reverse the  
CD so you can quickly find a particular passage in the track you  
are listening to.  
Notes:  
If the total playback time of the programed tracks exceeds 99  
minutes 59 seconds, “-- -- : -- --” appears on the display.  
If you try to program the 21st track, “FULL” appears on the  
display for about 2 seconds.  
Programing the Playing  
Order of the Tracks  
You can program the playing order of the tracks using the  
Remote Control.  
Modifying the program –––––––––––––––  
Modify the contents of the program while the CD Player is stopped.  
Each time you press the CANCEL button, the last track in the  
program is deleted. To add new tracks to the end of the program,  
repeat above steps 5 to 7.  
You can program up to 20 tracks in any desired order including  
the same tracks.  
You can only make a program when the CD Player is stopped.  
1 Insert a CD.  
2 Press the CD #/8 button.  
3 Press the 7 button to stop the CD.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing at Random  
The tracks will play in no particular order when you use this mode.  
Press the RANDOM button on the Remote  
Control.  
The RANDOM indicator lights up on the display, and tracks will  
be played in random order.  
To skip a track during playback, press the ¢ button (or the  
>/UP button on the Remote Control) to jump to the next randomly  
selected track. Press the 4 button (or the </DOWN button on the  
Remote Control) to jump back to the start of a track being played.  
To exit from Random Play mode, press the 7 button.  
Repeating Tracks  
You can set the program or individual track currently playing to  
repeat as many times as you like.  
Press the REPEAT button on the Remote  
Control.  
The Repeat indicator changes at each press of the button, as shown  
below.  
ALL  
blank display  
: Repeats one track.  
ALL : In Normal Play mode, repeats all the tracks.  
In Program Play mode, repeats all the tracks in  
the program.  
In Random Play mode, repeats all the tracks in  
random order.  
To exit from Repeat mode, press the REPEAT button until the  
Repeat indicator on the display goes out.  
In Random Play  
cannot be selected.  
Repeat mode remains in effect even when you change the play  
mode.  
Locking the CD cover  
You can lock the CD cover and prohibit to unload the CD.  
This operation is possible only using the buttons on the unit.  
To prohibit unloading the CD, press the button while  
holding the 7 button. (If the CD cover is opened, close it first.)  
“LOCKED” appears for a while, and the CD cover is locked.  
To cancel the prohibition and unlock the CD cover, press  
the  
button while holding the 7 button.  
“UNLOCKED” appears for a while, and the CD cover is unlocked.  
Note: If you try to unload the CD, “LOCKED” appears to inform  
you that the CD cover is locked.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Cassette Deck  
(Listening to a Tape)  
STANDBY  
AHB  
AUX  
PRO  
VOLUME  
Cassette  
holder  
REC  
TIMER  
REV  
CLOCK  
MODE  
CD  
REV. MODE  
OPEN/CLOSE  
TAPE  
FM/AM  
CD  
FM  
AUTO  
SLEEP  
AUX  
DISPLAY  
TAPE  
AUTO TAPE SELECTOR  
AUTO REVERSE  
MODE  
PRESET  
PHONES  
TAPE @ #  
DOWN  
MULTI CONTROL  
UP  
CD  
FM/AM  
¢
7
TAPE @ #  
TAPE  
TAPE 0  
CD  
¢
7
DISPLAY  
MODE  
4
REPEAT  
PROGRAM  
PTY/EON  
UP  
4
SET  
RANDOM  
DOWN  
TREBLE  
Tape Direction indicator  
Reverse Mode indicator  
AHB  
PRO  
BASS  
CANCEL  
VOLUME  
REMOTE CONTROL RM-SUXV20R  
When the System is in use, the display shows other items as well.  
For simplicity, only the items described in this section are shown here.  
The Cassette Deck allows you to play and record audio tapes.  
With Automatic Tape Detection, you can listen to type I, II or  
IV tapes without having to change any settings.  
5 If you need to change the playback direc-  
tion, press the TAPE @ # button again.  
The other Tape Direction indicator lights up and the tape  
playback direction changes.  
To stop playing, press the 7 button.  
To remove the tape, stop the tape, and press the TAPE 0 button on  
the Unit.  
The use of tapes longer than 120 minutes is not recommended,  
since characteristic deterioration may occur and these tapes  
easily jam in the pinch-rollers and the capstans.  
One touch play –––––––––––––––––––––––  
By pressing the TAPE @ # button on the Unit or the Remote  
Control, the Unit will come on, “TAPE” appears on the display,  
and if a tape is in the deck, it will start to play. If no tape is loaded,  
the Unit will come on and wait for you to insert a tape, or select  
another function.  
Fast-winding a tape ––––––––––––––––––  
Press the ¢ or 4 button to fast-wind the tape.  
The Cassette Deck automatically stops when the tape  
reaches its end.  
Reverse Mode  
You can set the cassette deck to play just one side of a tape, both  
sides once, or both sides continuously.  
Standard Play  
When the power is already on, you can use this basic procedure:  
Press the REV. (reverse) MODE button on  
the Unit.  
The indicator changes at each press of the button as shown.  
1 Press the TAPE 0 button on the Unit.  
2 When the cassette holder opens, put the  
cassette in, with the side you want to  
listen to facing up.  
If the cassette holder does not open, turn the Unit off, then  
back on and press the TAPE 0 button again.  
: The Cassette Deck automatically stops after playing both  
sides of the tape. (Stops when playback in the 2  
direction is finished.)  
: The Cassette Deck continues to play both sides of the  
tape until the 7 button is pressed.  
The Cassette Deck automatically stops after playing one  
side of the tape.  
:
3 Close the holder gently until it clicks.  
4 Press the TAPE @ # button.  
The tape is played in the direction shown by the Tape Direction  
indicator.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Cassette Deck  
(Recording)  
STANDBY  
AHB  
AUX  
PRO  
VOLUME  
REC  
TIMER  
CLOCK  
FM  
AUTO  
SLEEP  
AUX  
DISPLAY  
TAPE  
MODE  
PRESET  
REV  
MODE  
REC  
CD  
FM/AM  
REV. MODE  
CD  
CD #¥8  
7
OPEN/CLOSE  
TAPE @ #  
TAPE  
FM/AM  
CD  
CD  
PHONES  
DISPLAY  
MODE  
TAPE @ #  
CD #¥8  
Tape Direction indicator  
REPEAT  
PROGRAM  
PTY/EON  
UP  
DOWN  
MULTI CONTROL  
UP  
7
SET  
RANDOM  
DOWN  
TREBLE  
AHB  
PRO  
BASS  
CANCEL  
VOLUME  
REC  
REC indicator  
REMOTE CONTROL RM-SUXV20R  
When the System is in use, the display shows other items as well.  
For simplicity, only the items described in this section are shown here.  
Reverse Mode indicator  
Recording onto a tape from any of the sound sources is simple. Just  
place a tape in the Cassette Deck, have the source ready, make one  
or two settings, and you’re ready to record. For each source the  
procedure is a little bit different so we explain each separately. But  
first, here are a few things to make your recordings better.  
Standard Recording  
You can record any sound source to tape as follows:  
1 Insert a blank or erasable tape into the  
Cassette Deck.  
Things to know before you start  
2 If you want to record on both sides of a  
tape, press the REV. MODE button on the  
recording –––––––––––––––––––––––––––––  
It may be unlawful to record or play back copyrighted  
material without the consent of the copyright owner.  
When you want to record onto both sides of a tape, you can set  
Reverse mode to do so. Recording automatically stops after  
recording in the 2 direction. Therefore, make sure that the tape  
direction is 3 when recording with Reverse mode on.  
The recording level, which is the volume at which the new tape  
is being made, is automatically set correctly, so it is not  
affected by the VOLUME control on the System. Nor is it  
affected by adjusting the sound effects. Thus, during recording  
you can adjust the sound you are actually listening to without  
affecting the recording level.  
Unit until the  
indicator is lit.  
When using Reverse mode, insert the tape so that it will be  
recorded in the forward 3 direction.  
3 Check the recording direction for the  
tape.  
Make sure that the Tape Direction indicator is the same as that  
for the tape in the Cassette Deck. If the directions are different,  
press the TAPE @ # button to correct the tape direction and  
then press the 7 button to stop the tape.  
4 Prepare the source by, for example,  
tuning in a radio station or turning on  
connected auxiliary equipment.  
Note: For CD recording, refer to “CD Direct Recording” on page  
17.  
Two small tabs on the back of the cassette tape, one for side A  
and one for side B, can be removed to prevent accidental  
erasure or recording.  
Type II detection  
slot  
5 Press the REC button on the Unit.  
Adhesive tape  
The REC indicator lights up and the System begins recording.  
To record on a cassette with the tabs removed, you must cover  
the holes with adhesive tape first. However, when a type II tape  
is used, only cover part of the hole as shown, since the other  
part of the hole (Type II detection slot) is used to detect the  
tape type.  
Notes for using Reverse mode for recording  
When recording in Reverse mode, the System automatically stops  
when it reaches the end of the reverse 2 direction. To record on  
both sides of a tape, make sure that the recording direction for the  
tape inserted is forwards 3, and that the Tape Direction indicator is  
also forwards 3, before you start recording.  
Type I and Type II tapes can be used for recording.  
Note: At the start and end of cassette tapes, there is leader tape  
which cannot be recorded onto. Thus, when recording CDs  
or radio broadcasts, wind on the leader tape first to ensure  
that the recording will be made without any music part lost.  
To stop at any time during the recording  
process  
Press the 7 button.  
CAUTION:  
If a recording you make has excessive noise or  
static, the Unit may have been too close to a TV  
which was on during the recording. Either turn  
off the TV or increase the distance between the  
TV and the System.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
One track recording–––––––––––––––––  
CD Direct Recording  
Everything on the CD goes onto the tape in the order it is on the  
1 Insert a blank or erasable tape into the  
Cassette Deck.  
CD, or according to the order you have set in a program.  
2 Play the track on the CD you wish to  
record.  
1 Insert a blank or erasable tape into the  
Cassette Deck.  
3 Press the REC button on the Unit.  
The CD player returns to the beginning of that track and the  
track is recorded on the tape. After recording, the CD player  
and Cassette Deck automatically stop.  
2 Insert a CD.  
3 Press the CD #/8 button.  
4 Press the 7 button.  
If you want to record specific tracks only, program the  
tracks beforehand. You can check their total playback time  
on the display during programing. (See page 13.)  
5 If you want to record on both sides of a  
tape, press the REV. MODE button on the  
Unit until the  
indicator is lit.  
Make sure that the recording direction for the tape and the  
Tape Direction indicator are correct. (See “Notes for using  
Reverse mode for recording” on page 16.)  
6 Select whether to have pauses left be-  
tween recorded selections.  
If nothing is done, a non-recorded pause of about four  
seconds will be automatically left between selections.  
If you do not want pauses left between selections, do the  
following before proceeding to the next step.  
Press the CD #/8 button twice.  
The CD player enters Pause mode.  
7 Press the REC button on the Unit.  
The REC indicator lights up and the System begins recording.  
When recording a CD onto tape with Reverse mode on:  
If a song is recorded for more than 12 seconds (which  
corresponds to the length of leader tape) but not finished  
before the first side of tape comes to an end, this song will  
automatically be recorded on the second side from its  
beginning to avoid being split on both sides.  
If a song is recorded for less than 12 seconds before the  
first side of tape comes to an end, the song preceding this  
song will also be recorded on the second side from its  
beginning as it may not be completely recorded on the first  
side because of leader tape.  
After the CD player has played the entire CD, or all the  
programed tracks, the tape automatically stops.  
To stop at any time during the recording process, press  
the 7 button. The tape stops after 4 seconds.  
Note: When making SLEEP timer settings while doing CD Direct  
recording, set enough time to allow for the CD to finish  
playing, otherwise the power will go off before recording is  
completed.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using External Equipment  
FM  
AUTO  
SLEEP  
AUX  
DISPLAY  
TAPE  
MODE  
PRESET  
CD  
FM/AM  
AUX  
CD  
DISPLAY  
MODE  
REPEAT  
PROGRAM  
PTY/EON  
UP  
STANDBY  
AHB  
PRO  
AUX  
REC  
VOLUME  
SET  
AHB PRO  
AUX  
TIMER  
RANDOM  
DOWN  
TREBLE  
REV  
VOLUME +, –  
CLOCK  
MODE  
BASS  
AHB  
PRO  
BASS  
CANCEL  
CD  
OPEN/CLOSE  
AHB PRO  
TAPE  
FM/AM  
CD  
TREBLE  
VOLUME  
PHONES  
DOWN  
MULTI CONTROL  
UP  
VOLUME +, –  
REMOTE CONTROL RM-SUXV20R  
Listening to External  
Equipment  
You can connect an audio equipment — used only as a playback  
device.  
First make sure that the external equipment is properly  
connected to the System. (See page 4.)  
1 Set the VOLUME control to the minimum  
position.  
2 Press the AUX button.  
“AUX” appears on the display.  
3 Start playing the external equipment.  
4 Adjust the VOLUME control to the desired  
listening level.  
5 Apply sound effects, if you wish.  
Press the AHB PRO button to reinforce the bass sound.  
Press the BASS/TREBLE button on the Remote Control to  
control the tone. (See “Controlling the Tone (Bass/Treble)” on  
page 7.)  
To exit from AUX mode, select another source.  
Notes:  
For operation of the external equipment, refer to its  
Instructions.  
For recording from the external equipment, refer to “Standard  
Recording” on page 16.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Timers  
STANDBY  
AHB  
Timer indicator  
FM  
MODE  
AUTO  
PRESET  
AUX  
PRO  
SLEEP  
AUX  
DISPLAY  
TAPE  
VOLUME  
SLEEP  
CD  
REC  
TIMER  
FM/AM  
TIMER  
CLOCK  
REV  
ON  
SLEEP  
CLOCK  
MODE  
CD  
OFF CLOCK  
CD  
OPEN/CLOSE  
DISPLAY  
MODE  
TAPE  
FM/AM  
CD  
REPEAT  
PROGRAM  
PTY/EON  
UP  
PHONES  
DOWN  
MULTI CONTROL  
UP  
SET  
¢
4
RANDOM  
DOWN  
TREBLE  
AHB  
PRO  
BASS  
CANCEL  
VOLUME  
ON time, OFF time  
REMOTE CONTROL RM-SUXV20R  
When the System is in use, the display shows other items as well.  
For simplicity, only the items described in this section are shown here.  
The timers let you control listening and recording functions  
automatically.  
Setting the Daily Timer  
Once you have set the Daily Timer, the timer will be activated at  
the same time every day. It can be canceled and re-activate  
whenever you wish.  
The Timer indicator on the display shows when the Daily Timer  
you have set will be activated.  
Setting the Clock  
When you plug the AC power cord into the wall outlet, the  
CLOCK indicator flashes on the display.  
You can set the clock whether the System is on or off.  
Notes:  
Notes:  
Finish each step within 30 seconds. Otherwise, the setting is  
cleared and the procedure must be repeated from the beginning.  
The clock must be correctly set for the timers to work.  
If the clock has not been set, the CLOCK indicator will flash  
on the display when you press the TIMER button for more than  
2 seconds, and then the display alternates between “ADJUST”  
and “CLOCK” for about 5 seconds.  
The clock must be correctly set for the timers to work.  
The procedure must be completed within 2 minutes. Otherwise,  
the setting is cleared and must be repeated from the beginning.  
CLOCK  
CLOCK  
DOWN  
UP  
or  
(For 2 seconds)  
1 Press the TIMER button on the Unit for  
1 Press the CLOCK button on the Unit for  
more than 2 seconds.  
more than 2 seconds.  
The ON indicator lights up, and then the current ON time  
flashes on the display. (Example: 12:00)  
The hour digits rapidly flash on the display.  
ON  
SLEEP  
2 Press the ¢ or 4 button to set the  
hour.  
Pressing the ¢ button moves the hour forwards and pressing  
the 4 button moves it backwards. Hold down the button to  
move the hour rapidly.  
2 Set the ON time. (Example: 12:15)  
Press the ¢ or 4 button on the Unit to set the hour you  
3 Press the CLOCK button.  
want the Unit to come on.  
Pressing the ¢ button moves the hour forwards and pressing  
the 4 button moves it backwards. Hold down the button to  
move the hour rapidly. Press the TIMER button to adjust the  
minute.  
The minute digits rapidly flash on the display.  
4 Press the ¢ or 4 button to set the  
minute.  
ON  
SLEEP  
Pressing the ¢ button moves the minute forwards and  
pressing the 4 button moves it backwards. Hold down the  
button to move the minute rapidly.  
3 Set the OFF time. (Example: 13:15)  
1. Press the TIMER button on the Unit.  
5 Press the CLOCK button again.  
The selected time is set and the seconds start counting from 0.  
The CLOCK indicator remains lit on the display.  
The hour digits of the current OFF time flashes, and then  
the OFF indicator lights up on the display.  
SLEEP  
OFF  
CAUTION:  
If the System is unplugged, or a power failure  
occurs, the timer setting will be lost. You will  
need to reset the clock first, then the timer.  
2. Press the ¢ or 4 button on the Unit to set the time you  
want the Unit to be turned off.  
Note: The clock may gain or lose 1 to 2 minutes per month.  
Pressing the ¢ button moves the hour forwards and  
pressing the 4 button moves it backwards. Hold down  
the button to move the hour rapidly. Press the TIMER  
button again to adjust the minute.  
SLEEP  
OFF  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Select the music source.  
1. Press the TIMER button on the Unit.  
“TUNER” flashes on the display.  
Setting the Recording Timer  
With the Recording Timer, you can make a tape of radio broadcast  
automatically.  
2. Press the ¢ or 4 button to select the music source you  
want to listen to.  
The display changes as shown below.  
How Recording Timer actually works  
The Unit automatically turns on, tunes into the last received station,  
and starts recording when the on-time comes. Then, when the off-  
time comes, the Unit automatically turns off (stands by).  
The timer setting remains in memory until you change it.  
Notes:  
Finish each step within 30 seconds. Otherwise, the setting is  
cleared and the procedure must be repeated from the beginning.  
The clock must be correctly set for the timers to work.  
If the clock has not been set, the CLOCK indicator will flash  
on the display when you press the TIMER button for more than  
2 seconds, and then the display alternates between “ADJUST”  
and “CLOCK” for about 5 seconds.  
5 Set the volume level.  
1. Press the TIMER button on the Unit.  
The current volume setting flashes on the display.  
2. Press the ¢ or 4 button to select the volume level.  
--  
: The current volume level will be used.  
0 to 40 : When the timer is turned on, the Volume will  
be automatically set to the selected level.  
SLEEP  
1 Press the  
tem.  
button to turn on the Sys-  
2 Tune in to the desired station.  
See page 8.  
3 Press the TIMER button on the Unit for  
6 Press the TIMER button on the Unit.  
The timer setting is completed and the display returns to the indi-  
cations before you set the timer. The Timer indicator remains lit.  
more than 2 seconds.  
The ON indicator lights up, and then the current ON time  
flashes on the display. (Example: 12:00)  
ON  
SLEEP  
7 Before turning off the System, prepare  
the music source selected in step 4.  
TUNER: Tune in to the desired station.  
REC  
TUNER: See “Setting the Recording Timer”.  
4 Set the ON time. (Example: 12:15)  
CD: Insert a CD.  
Press the ¢ or 4 button on the Unit to set the hour you  
TAPE: Insert a tape.  
want the Unit to come on.  
Pressing the ¢ button moves the hour forwards and pressing  
the 4 button moves it backwards. Hold down the button to  
move the hour rapidly. Press the TIMER button to adjust the  
minute.  
8 Press the  
tem.  
To cancel the timer, press the TIMER button for more than 2  
seconds. The Timer indicator goes out on the display.  
To re-activate the canceled timer, press the TIMER button for  
more than 2 seconds to light the Timer indicator. Then, press the  
TIMER button until the display returns to the previous indications.  
The Timer indicator should remain lit.  
To confirm the timer settings, cancel the timer once by  
pressing the TIMER button, and press the button again for more  
than 2 seconds. Then, press the TIMER button repeatedly, to see  
the current timer settings (ON time, OFF time, source, and  
volume). Press the TIMER button to set the timer again.  
To change the timer setting, repeat the setting procedure from  
the beginning.  
button to turn off the Sys-  
ON  
SLEEP  
5 Set the OFF time. (Example: 13:15)  
1. Press the TIMER button on the Unit.  
The hour digits of the current OFF time flashes, and then  
the OFF indicator lights up on the display.  
SLEEP  
OFF  
2. Press the ¢ or 4 button on the Unit to set the time you  
want the Unit to be turned off.  
When the timer turns on, the Timer indicator starts flashing.  
Pressing the ¢ button moves the hour forwards and  
pressing the 4 button moves it backwards. Hold down  
the button to move the hour rapidly. Press the TIMER  
button again to adjust the minute.  
Note: If the Unit is turned on when the timer-on time comes,  
Daily Timer does not work.  
SLEEP  
OFF  
CAUTION:  
If the System is unplugged, or a power failure  
occurs, the timer will be canceled. You will need  
to reset the clock first, then the timer.  
6 Press the TIMER button on the Unit.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 Press the ¢ or 4 button until “TUNER”  
appears and the REC indicator lights up  
on the display.  
Setting the Sleep Timer  
When a source is playing, use the Sleep Timer to turn the System  
off after a certain number of minutes. By setting the Sleep Timer,  
you can fall asleep to music and know that your System will turn  
off by itself rather than play all night.  
The display changes as shown below.  
You can only set the Sleep Timer when the System is on.  
Note: The clock must be correctly set for the timers to work.  
If the clock has not been set, the CLOCK indicator will  
flash on the display when you press the TIMER button for  
more than 2 seconds, and then the display alternates  
between “ADJUST” and “CLOCK” for about 5 seconds.  
8 Set the volume level.  
1. Press the TIMER button on the Unit.  
The current volume setting flashes on the display.  
2. Press the ¢ or 4 button to select the volume level.  
1 Play a CD or a cassette tape, or tune in to  
the desired station.  
--  
: The current volume level will be used.  
0 to 40 : When the timer is turned on, the Volume will be  
automatically set to the selected level.  
To turn off the volume while the Recording Timer is  
working, set the volume level to “0”.  
2 Press the SLEEP button on the Remote  
Control.  
The SLEEP indicator lights up.  
3 Set the length of time you want the  
source to play before shutting off.  
9
Press the TIMER button on the Unit.  
The timer setting is completed and the display returns to the indi-  
cations before you set the timer. The Timer indicator remains lit.  
Note: If you change the station before turning off the System,  
the last received station will be recorded.  
Each time you press the SLEEP button, it changes the number  
of minutes shown on the display in this sequence:  
10  
Canceled  
20  
30  
60  
90  
10 Insert a blank or erasable tape into the  
Cassette Deck.  
120  
After setting the number of minutes for the Sleep Timer, the  
display will stop flashing and return to the previous state.  
The System is now set to turn off after the number of minutes you  
set.  
Make sure that the tape has the enough length for recording.  
11 Press the  
System.  
button to turn off the  
To cancel the timer, press the TIMER button for more than 2  
seconds. The REC and Timer indicators go out on the display.  
To re-activate the canceled timer, press the TIMER button for  
more than 2 seconds to light the REC and Timer indicators.  
To confirm the timer settings, cancel the timer once by  
pressing the TIMER button, and press the button again for more  
than 2 seconds. Then, press the TIMER button repeatedly, to see  
the current timer settings (ON time, OFF time, source, and  
volume). Press the TIMER button to set the timer again.  
To change the timer setting, repeat the setting procedure from  
the beginning.  
To confirm the Sleep Time  
When the SLEEP button is pressed, the remaining sleep time is  
displayed.  
To cancel the Sleep Timer setting  
Press the SLEEP button until the SLEEP indicator goes out on the  
display.  
Turning off the System also cancels the Sleep Timer.  
When the timer turns on, the Timer indicator starts flashing.  
Note: If the Unit is turned on when the timer-on time comes,  
Recording Timer does not work.  
CAUTION:  
If the System is unplugged, or a power failure  
occurs, the timer will be canceled. You will need  
to reset the clock first, then the timer.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
Handle your CDs carefully, and they will last a long time.  
If there are fingerprints, etc. on the lens, gently wipe clean with  
a cotton swab.  
Compact Discs  
Only CDs bearing this mark can be used with  
this System. However, continued use of  
irregular shape CDs (heart-shape, octagonal,  
etc.) can damage the System.  
Moisture Condensation  
Moisture may condense on the lens inside the  
System in the following cases:  
Remove the CD from its case by holding it at  
the edges while pressing the case’s center hole  
lightly.  
Do not touch the shiny surface of the CD, or  
bend the CD.  
After turning on heating in the room  
In a damp room  
If the System is brought directly from a cold to  
a warm place  
Should this occur, the System may malfunction. In  
this case, leave the System turned on for a few  
hours until the moisture evaporates, unplug the AC  
power cord, and then plug it in again.  
Put the CD back in its case after use to prevent  
warping.  
Be careful not to scratch the surface of the CD  
when placing it back in the case.  
Avoid exposure to direct sunlight, temperature  
extremes, and moisture.  
Cassette Tapes  
If the tape is loose, it may get stretched, cut, or  
A dirty CD may not play correctly. If a CD  
does become dirty, wipe it with a soft cloth in a  
straight line from center to edge.  
caught in the cassette. Take up the slack by  
inserting a pencil in one of the reels and  
rotating.  
CAUTION: Do not use any solvent (for example,  
conventional record cleaner, spray thinner,  
benzine, etc.) to clean a CD.  
Do not touch the tape surface.  
General Notes  
Do not store the tape:  
In general, you will have the best performance by keeping your  
CDs and the mechanism clean.  
-
-
-
-
-
In dusty places  
In direct sunlight or heat  
In moist areas  
On a TV or speaker  
Near a magnet  
Store CDs in their cases, and keep them in cabinets or on  
shelves.  
Keep the system’s CD cover closed when not in use.  
Cassette Deck  
Cleaning the Lens  
If the heads, capstans, or pinch-rollers of the Cassette Deck  
become dirty, the following may occur:  
If the lens in the CD pickup is dirty, sound degradation may take  
place.  
-
-
-
-
-
Loss of sound quality  
Discontinuous sound  
Fading  
Incomplete erasure  
Difficulty in recording  
Open the CD cover and clean the lens as shown.  
Use a blower (available from a camera store) to blow dust off  
the lens.  
Clean the heads, capstans, and pinch-rollers using a cotton  
swab moistened with alcohol.  
Blower  
Lens  
Capstans  
Pinch-rollers  
Erase head  
Record/play head  
If the heads become magnetized, the Unit will produce noise or  
lose high frequency notes.  
To demagnetize the heads, turn off the Unit, and use a head  
demagnetizer (available at electronics and record shops).  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If you are having a problem with your System, check this list for a possible solution before calling for service.  
If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as  
your dealer, for service.  
Possible Cause  
Action  
Symptom  
Connections are incorrect, or loose.  
Check all connections and make  
corrections. (See pages 2 – 5.)  
Disconnect the headphones.  
No sound is heard.  
Headphones are connected.  
Antennas are disconnected.  
The AM Loop Antenna is too close to  
the System.  
Reconnect the antenna securely.  
Change the position and direction of the  
AM Loop Antenna.  
Poor radio reception  
The FM Wire Antenna is not properly  
extended and positioned.  
Extend FM Wire Antenna to the best  
reception position.  
The CD is upside down.  
Put the CD in with the label side up.  
Clean or replace the CD.  
The CD does not play.  
The CD is dirty or scratched.  
The AC power cord is not plugged in.  
The CD skips.  
Plug the AC power cord.  
The CD cover does not open or close.  
The cassette holder cannot be opened.  
During tape playing, the power cord was  
unplugged.  
Plug in the power cord, press the  
button, and then press the TAPE 0 button.  
Cassette record protect tabs are removed.  
Cover the holes on the back edge of the  
cassette with adhesive tape.  
Unable to record.  
The built-in microprocessor has malfunc-  
tioned due to external electrical interference.  
Unplug the System then plug it back in.  
Operations are disabled.  
The path between the Remote Control  
and the sensor on the Unit is blocked.  
The batteries have lost their charge.  
Remove the obstruction.  
Replace the batteries.  
Unable to operate the Remote Control.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
UX-V20R (CA-UXV20R and SP-UXV20R)  
UX-V10 (CA-UXV10 and SP-UXV10)  
Amplifier  
Output Power 44 W (22 W + 22 W) at 4 (Max.)  
40 W (20 W + 20 W) at 4 (10% THD)  
Input Sensitivity/Impedance (1 kHz)  
LINE IN (AUX) 400 mV/48 kΩ  
Speaker terminals 4 - 16 Ω  
Phones 16 - 1 kΩ  
0 mW - 15 mW per channel output into 32 Ω  
Cassette Deck  
Frequency Response  
Type I (Normal) 50 Hz - 14 kHz  
Type II (CrO2) 50 Hz - 15 kHz  
Wow and Flutter 0.15% (WRMS)  
CD Player  
Signal-To-Noise Ratio 90 dB  
Wow And Flutter Immeasurable  
Tuner  
FM Tuner  
Tuning Range 87.5 MHz - 108.0 MHz  
AM Tuner  
Tuning Range (MW) 522 kHz - 1,629 kHz  
(LW) 144 kHz - 288 kHz  
Speaker Specifications  
(each unit)  
Speakers 8 cm cone x 1  
Impedance 4 Ω  
Dimensions 140 mm x 230 mm x 211 mm (W/H/D)  
Mass Approx. 1.8 kg  
General  
Dimensions 438 mm x 234 mm x 279 mm (W/H/D)  
Mass Approx. 6.8 kg  
Power Specifications  
Power Requirements AC 230 V  
, 50 Hz  
Power Consumption 50 W (power on mode)  
3.7 W (in Standby mode)  
Accessories  
See page 2.  
Design and specifications are subject to change without notice.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VICTOR COMPANY OF JAPAN, LIMITED  
EN, GE, FR, NL, SP, IT  
0100MWMMDWJEM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer Dryer IDCE 8450 B H User Manual
Ingersoll Rand Cordless Drill 8670 1 User Manual
JL Audio Car Stereo System 300 2 User Manual
Jotul Indoor Fireplace GZ550s User Manual
JVC Car Stereo System GET0075 001A User Manual
JVC CRT Television HV 53PRO User Manual
Kenmore Clothes Dryer 69902 User Manual
Kenwood Computer Monitor LZ 760R User Manual
Kramer Electronics Camcorder XE 21C User Manual
Kramer Electronics Projector VP 727T User Manual