COMPACT COMPONENT SYSTEM
CA-MXG65V
CA-MXG68V
VIDEO CD
PlayBack
Control
DISC CHANGE
DISC CHANGE
STANDBY
STANDBY
STANDBY/ON
STANDBY/ON
PLAY
&
EXCHANGE
CD-R
/
RW PLAYBACK
PLAY
&
EXCHANGE
CD-R
/
RW PLAYBACK
SOUND
MODE
SOUND
MODE
VIDEO CD
PRESET
VIDEO CD
PRESET
SUBWOOFER
LEVEL
SUBWOOFER
LEVEL
NEXT
NEXT
PREV
PREV
COMPACT
COMPACT
DIGITAL VIDEO
COMPACT COMPONENT SYSTEM MX-G65V
COMPACT COMPONENT SYSTEM MX-G68V
DIGITAL VIDEO
SET
SET
CANCEL
/DEMO
CANCEL
/DEMO
PHONES
PHONES
TUNING
TUNING
SELECT
SELECT
CLOCK
TIMER
CLOCK
TIMER
/
DISPLAY
/
DISPLAY
STANDBY/ON
REPEAT PROGRAM RANDOM
REPEAT PROGRAM RANDOM
REC START CD
REC START DUBBING
SUBWOOFER SOUND
LEVEL
MODE
STANDBY/ON
SUBWOOFER SOUND
LEVEL
MODE
ON SCREEN
V.INTRO
REC START CD
/STOP
1
4
2
5
3
6
9
ON SCREEN
V.INTRO
TAPE
A
TAPE
B
TAPE
A
TAPE
B
PBC
RETURN
VCD NUMBER
PBC
RETURN
VCD NUMBER
REC START DUBBING
/STOP
1
4
2
5
3
6
9
HIGHLIGHT SLOW
HIGHLIGHT SLOW
MPX
AUX
7
8
MPX
AUX
7
8
FM MODE/
STILL
KEY CONTROL
FM MODE/
STILL
10
+10
I
i
KEY CONTROL
10
+10
I
i
SLEEP
RETURN KARAOKE ECHO
SLEEP
RETURN KARAOKE ECHO
FADE
FM/AM
CD
TAPE
TAPE A/B MUTING
DISC SKIP
FADE
FM/AM
CD
TAPE
TAPE A/B MUTING
DISC SKIP
SELECT
+
EJECT
EJECT
SELECT
EJECT
EJECT
VOLUME
+
VOLUME
PREV.
NEXT
PREV.
NEXT
VOLUME
–
VOLUME
–
FULL - LOGIC CONTROL
CD SYNCHRO RECORDING
FULL - LOGIC CONTROL
CD SYNCHRO RECORDING
A
PLAY
REC/PLAY
B
A
PLAY
REC/PLAY
B
RM–SMXG65VU REMOTE CONTROL
RM–SMXG65VU REMOTE CONTROL
CA-MXG65V
CA-MXG68V
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT0700 -001A
[US]
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
•
Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to
get out.)
•
•
Do not place any naked flame sources, such as
lighted candles, on the apparatus.
When discarding batteries, environmental problems
must be considered and local rules or laws governing
the disposal of these batteries must be followed
strictly.
•
Do not use this apparatus in a bathroom or places
with water. Also do not place any containers filled with
water or liquids (such as cosmetics or medicines,
flower vases, potted plants, cups, etc.) on top of this
apparatus.
– G-2 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1 Front:
No obstructions and open spacing.
2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
3 Bottom:
Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand
with a height of 10 cm or more.
15 cm
15 cm
1 cm
1 cm
15 cm
15 cm
15 cm
CA-MXG65V
CA-MXG68V
CA-MXG65V
CA-MXG68V
10 cm
– G-3 –
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT FOR LASER PRODUCTS /
REPRODUCTION OF LABELS /
1
CLASSIFICATION LABEL, PLACED ON REAR
ENCLOSURE
2
WARNING LABEL, PLACED INSIDE THE UNIT
ADVARSEL: Usynlig laser-
stråling ved åbning, når
sikkerhedsafbrydere er ude
af funktion. Undgå udsæt-
VARO: Avattaessa ja suo-
jalukitus ohitettaessa olet
DANGER: Invisible laser
radiation when open and
interlock failed or defeated.
AVOID DIRECT EXPOSURE
VARNING: Osynlig laser-
strålning när denna del är
öppnad och spärren är
alttiina
lasersäteilylle. Älä katso
säteeseen. (f)
näkymättömälle
CLASS
LASER
1
urkopplad.
strålen.
Betrakta
ej
(s)
telse for stråling
(d)
TO BEAM.
(e)
PRODUCT
1. CLASS 1 LASER PRODUCT
2. DANGER: Invisible laser radiation when open and interlock
failed or defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the Unit; leave all servicing to
qualified service personnel.
– G-4 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
We would like to thank you for purchasing one of our JVC products.
Before operating this unit, read this manual carefully and thoroughly to
obtain the best possible performance from your unit, and retain this manual
for future reference.
Power sources
• When unplugging from the wall outlet, always pull the
plug, not the AC power cord.
About This Manual
This manual is organized as follows:
• The manual mainly explains operations using the
buttons and controls on the unit. You can also use the
buttons on the remote control if they have the same or
similar names (or marks) as those on the unit.
If operation using the remote control is different from
that using the unit, it is then explained.
• Basic and common information that is the same for many
functions is grouped in one place, and is not repeated in
each procedure. For instance, we do not repeat the
information about turning on/off the unit, setting the
volume, changing the sound effects, and others, which are
explained in the section “Common Operations” on pages 9
to 11.
DO NOT handle the AC power cord with wet
hands.
Moisture condensation
Moisture may condense on the lens inside the unit in the
following cases:
• After starting heating in the room
• In a damp room
• If the unit is brought directly from a cold to a warm place
Should this occur, the unit may malfunction. In this case,
leave the unit turned on for a few hours until the moisture
evaporates, unplug the AC power cord, and then plug it in
again.
• The following marks are used in this manual:
Gives you warnings and cautions to prevent
damage or risk of fire/electric shock.
Also gives you information which is not good
for obtaining the best possible performance
from the unit.
Others
• Should any metallic object or liquid fall into the unit,
unplug the unit and consult your dealer before operating
any further.
• If you are not going to operate the unit for an extended
period of time, unplug the AC power cord from the wall
outlet.
Gives you information and hints you had better
know.
DO NOT disassemble the unit since there are no
user serviceable parts inside.
Precautions
If anything goes wrong, unplug the AC power cord and
consult your dealer.
Installation
• Install in a place which is level, dry and neither too hot nor
too cold — between 5˚C (41˚F) and 35˚C (95˚F).
• Install the unit in a location with adequate ventilation to
prevent internal heat built-up in the unit.
• Leave sufficient distance between the unit and the TV.
• Keep the speakers away from the TV to avoid interference
with TV.
DO NOT install the unit in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust or vibration.
– 1 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Location of the Buttons and Controls ....................... 3 Playing Back Tapes ................................................... 20
Front Panel ................................................................. 3
Remote Control .......................................................... 5
Playing Back a Tape ................................................. 20
Recording .................................................................. 21
Getting Started............................................................ 6
Recording a Tape on Deck B.................................... 21
Dubbing Tapes.......................................................... 22
CD Synchronized Recording ..................................... 22
Unpacking .................................................................. 6
Putting the Batteries into the Remote Control ........... 6
Connecting Antennas ................................................. 6
Connecting Speakers .................................................. 7
Connecting Other Equipment..................................... 8
Adjusting the Voltage Selector ................................... 8
Cancelling the Display Demonstration ...................... 8
Using the Microphones............................................. 23
Singing Along (Karaoke) ......................................... 23
Microphone Mixing ................................................. 23
Using Multiplex Discs
— Multiplex Sound (MPX) ................................ 24
Adjusting Key Control ............................................. 24
Common Operations .................................................. 9
Turning On or Off the Power ....................................... 9
Setting the Clock ........................................................ 9
Selecting the Sources................................................. 10
Setting the AM Tuner Interval Spacing .................... 10
Adjusting the Volume ............................................... 10
Reinforcing the Bass Sound ..................................... 11
Selecting the Sound Modes ...................................... 11
Using the Timers ....................................................... 25
Using Daily Timer .................................................... 25
Using Recording Timer ............................................ 26
Using Sleep Timer .................................................... 27
Timer Priority ........................................................... 27
Maintenance .............................................................. 28
Troubleshooting ........................................................ 29
Specifications............................................................. 30
Listening to FM and AM Broadcasts ...................... 12
Tuning in a Station ................................................... 12
Presetting Stations .................................................... 12
Tuning in a Preset Station ........................................ 12
Playing Back Discs.................................................... 13
Loading Discs........................................................... 13
Playing Back the Entire Discs
— Continuous Play............................................. 13
Basic Disc Operations .............................................. 14
Programming the Playing Order of the Tracks
— Program Play ................................................. 14
Playing at Random — Random Play ....................... 15
Repeating Tracks or Discs — Repeat Play .............. 15
Prohibiting Disc Ejection — Tray Lock................... 15
Playing Video CDs ................................................... 16
Special Plays for Video CDs .................................... 16
Playing Video CDs with PBC Function ................... 18
– 2 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of the Buttons and Controls
Become familiar with the buttons and controls on your unit.
Front Panel
1
DISC CHANGE
STANDBY
2
STANDBY/ON
u
i
o
PLAY & EXCHANGE
CD-R
/
RW PLAYBACK
;
a
3
SOUND
MODE
4
5
VIDEO CD
SUBWOOFER
LEVEL
PRESET
6
s
d
NEXT
PREV.
7
8
9
p
q
COMPACT
COMPACT COMPONENT SYSTEM MX-G65V
DIGITAL VIDEO
SET
CANCEL
/DEMO
f
g
h
PHONES
TUNING
SELECT
CLOCK
w
e
DISPLAY
/
TIMER
REPEAT PROGRAM RANDOM
REC START CD
TAPE A
TAPE B
PBC
RETURN
VCD NUMBER
/STOP
REC START DUBBING
j
r
t
y
k
l
/
EJECT
EJECT
FULL - LOGIC CONTROL
CD SYNCHRO RECORDING
PLAY
REC/PLAY
A
B
– 3 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Display Window
3
1
2
4 5
7
6
w
8
q
9
p
See pages in the parentheses for details.
s PRESET + / – buttons (12)
4 / ¢ (reverse search/forward search) buttons
Front Panel
(9, 14, 25 – 27)
PREV. (previous) / NEXT buttons (16, 18, 19)
d SUBWOOFER LEVEL control (11)
f VOLUME control (10)
1 Carrousel
2
STANDBY/ON button and STANDBY lamp
(9, 26, 27)
g TUNING + / – buttons (12)
1 / ¡ (fast rewind/fast forward) buttons (10, 14, 16)
h MIC LEVEL control (23)
3 7 (stop) button (13 – 23)
4 SET button (9, 12, 14, 25 – 27)
5 CANCEL button (9, 15, 25, 26)
DEMO button (8)
j MIC jack (23)
k TAPE A button (16, 20)
6 Display window
• This button also functions as NTSC/PAL button.
TAPE B button (20)
l REC START/STOP button (21)
CD REC START button (22)
7 TAPE 3 button and lamp (10, 20, 22)
Pressing this button also turns on the unit.
8 CD 6 (play/pause) button and lamp (10, 13 – 15)
Pressing this button also turns on the unit.
SELECT button (18, 19)
DUBBING button (22)
/ Deck B cassette holder (20 – 22)
• Pressing the EJECT 0 portion opens the holder.
9 FM/AM button and lamp (10, 12)
Pressing this button also turns on the unit.
p DISPLAY button (9)
q AUX button and lamp (10)
Pressing this button also turns on the unit.
w PHONES jack (10)
e CLOCK/TIMER button (9, 25 – 27)
r PBC button (18, 19)
RETURN button (18, 19)
VCD NUMBER + / – buttons (18, 19)
t REPEAT button (15)
Display window
1 Timer indicators
• DAILY (daily timer), REC (recording timer), SLEEP
(sleep timer), and
(timer) indicators
2 Tape operation indicators
• A/B (operating deck), REC (recording), and 2 3 (tape
running) indicators
3 CD play mode indicators
• REPEAT (1, 1 DISC, ALL DISC), PRGM (program),
and RANDOM indicators
4 Tuner operation indicators
• MONO and ST (stereo) indicators
5 PBC indicator
6 SOUND MODE indicator
7 Disc indicators
8 Volume level, Subwoofer level, and Sound Mode pattern
indicators
PROGRAM button (14)
RANDOM buttons (15)
y Deck A cassette holder (20, 22)
• Pressing the 0 EJECT portion opens the holder.
u 0 (Carrousel open/close) button (13 – 16)
Pressing this button also turns on the unit.
i Disc number buttons and lamps (CD1, CD2, and CD3)
(13, 14, 17 – 19, 22)
Pressing one of these buttons also turns on the unit.
o DISC CHANGE button (13, 14)
; Remote sensor
9 Karaoke (
) and echo ( ) indicators
p SUBWOOFER LEVEL indicator
q Main display
• Shows the source name, frequency, etc.
w CD track number indicators
a SOUND MODE control (11)
– 4 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Remote Control
1
STANDBY/ON button (9)
2 Number buttons (12, 14, 17)
3 FM MODE button (12)
STILL button (17)
STANDBY/ON
q
w
SUBWOOFER SOUND
LEVEL
MODE
4 RETURN
button (18, 19)
1
2
5 SLEEP button (27)
6 FM/AM button (10, 12)
ON SCREEN V. INTRO
HIGHLIGHT SLOW
1
4
2
5
3
6
9
e
Pressing this button also turns on the unit.
7 CD 6 button (10, 13 – 15)
SELECT button (18, 19)
8 TAPE 3 button (10, 20, 22)
Pressing this button also turns on the unit.
9 4 (fast rewind/reverse search) button (12, 14, 20)
PREV. (previous) button (16, 18, 19)
p VOLUME – button (10)
MPX
AUX
r
t
y
u
i
o
;
a
s
7
8
FM MODE/
STILL
KEY CONTROL
3
4
+10
10
I
i
SLEEP
RETURN
KARAOKE ECHO
FADE
FM/AM
CD
TAPE
TAPE A/B MUTING
DISC SKIP
5
6
7
8
/
SELECT
+
q SUBWOOFER LEVEL button (11)
w SOUND MODE button (11)
e VCD operating buttons
VOLUME
9
PREV.
NEXT
ON SCREEN button (17)
V. INTRO button (17)
HIGHLIGHT button (17)
SLOW button (16)
d
f
VOLUME
p
–
r AUX button (10)
Pressing this button also turns on the unit.
t MPX button (24)
y KEY CONTROL I / i buttons (24)
u ECHO button (24)
i KARAOKE button (24)
o FADE MUTING button (10)
; DISC SKIP button (13, 14)
a TAPE A/B button (20)
RM–SMXG65VU REMOTE CONTROL
s VOLUME + button (10)
d ¢ (fast forward/forward search) button (12, 14, 20)
NEXT button (16, 18, 19)
f 7 (stop) button (13 – 23)
DISC CHANGE
SSTTAANNDDBBYY
STANDBY/ON
PLAY
&
EXCHANGE
CD-R/
RW PLAYBACK
SOUND
MODE
VIDEO CD
PRESET
SUBWOOFER
LEVEL
COMPACT
COMPACT COMPONENT SYSTEM
DIGITAL AUDIO
S
PR
CAN
/D
PHONES
TUNING
SELECT
CLOCK
/
TIMER
DISPLAY
REPEAT PROGRAM RANDOM
REC START CD
REC START DUBBING
PBC
RETURN
VCD NUMBER
/STOP
EJECT
EJECT
FULL - LOGIC CON
A
PLAY
B
When using the remote control, point it at
the remote sensor on the front panel.
– 5 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Continued
Unpacking
Connecting Antennas
After unpacking, check to be sure that you have all the
following items.
FM antenna
The number in the parentheses indicates the quantity of the
pieces supplied.
FM antenna (supplied)
• AM loop antenna (1)
• FM antenna (1)
• Remote control (1)
• Batteries (2)
AM
ANTENNA
FM [75
]
• Video cord (1)
• AC plug adaptor (1)
If any is missing, consult your dealer immediately.
1 Attach the FM antenna to the FM [75 Ω]
Putting the Batteries into the Remote Control
coaxial terminal.
Insert the batteries — UM-4/AAA/IEC R03 — into the
remote control, by matching the polarity (+ and –) on the
batteries with the + and – markings on the battery
compartment.
When the remote control can no longer operate the unit,
replace both batteries at the same time.
2 Extend the FM antenna.
3 Fasten it up in the position which gives you
the best reception, then fix it on the wall, etc.
1
About the supplied FM antenna
The FM antenna supplied with this unit can be used as temporary
measure. If reception is poor, you can connect an outdoor FM
antenna.
To connect an outdoor FM antenna
Before connecting it, disconnect the supplied FM antenna.
Outdoor FM antenna
(not supplied)
2
UM-4/AAA/IEC R03
-
3
AM
ANTENNA
FM [75
]
• DO NOT use an old battery together with a new one.
• DO NOT use different types of batteries together.
• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery
A 75 Ω antenna with coaxial type connector should be
used.
compartment when you are not going to use the
remote control for an extended period of time.
Otherwise, it will be damaged from battery leakage.
– 6 –
Download from Www.Somanuals.com. All Manuals Search And Download.
AM antenna
Connecting Speakers
2
1
1
2
Vinyl-covered wire
(not supplied)
ANENNA
FM 75
[
]
AM
Speaker cord
(blue/black)
Black
Speaker
cord
(red/black)
MAIN SPEAKER SUBWOOFER
[
]
[
]
4-8
6-16
L
L
R
R
Red
Blue
Black
Speaker cord
(blue/black)
Speaker cord
(red/black)
AM loop antenna
(supplied)
From right
main
speaker’s
terminals
From right
subwoofer’s
terminals
1 Press and hold the clamp of the AM
terminals on the rear of the unit.
From left
subwoofer’s
terminals
From left
main
speaker’s
terminals
2 Insert the end of the AM loop antenna cord
into the terminal.
3 Release the finger from the clamp.
1 Press and hold the clamp of the speaker
4 Turn the AM loop antenna until you have the
terminal on the rear of the unit.
best reception.
2 Insert the end of the speaker cord into the
To connect an outdoor AM antenna
terminal.
When reception is poor, connect a single vinyl-covered wire
to the AM terminal and extend it horizontally. (The AM loop
antenna must remain connected.)
Match the polarity (colors): Blue (+) to blue (+) and black
(–) to black (–); Red (+) to red (+) and black (–) to black
(–).
3 Release the finger from the clamp.
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
IMPORTANT: Use only speakers with the same speaker
impedance as indicated by the speaker terminals on the
rear of the unit.
– 7 –
Download from Www.Somanuals.com. All Manuals Search And Download.
To connect the TV
Connecting Other Equipment
VIDEO
OUT
You can connect conventional audio equipment and TV.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
To video input
To connect analog audio component
TV
Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.
Connect the video input jacks and the VIDEO OUT jack on
the rear using a video cord (supplied.)
AUX IN
Adjusting the Voltage Selector
Before plugging in the unit, set the correct voltage for your
area with the voltage selector on the rear of the unit.
• DO NOT plug in before setting the voltage
selector on the rear of the unit and all connection
procedures are complete.
Audio equipment
To audio output
Connect the audio output jacks on the other equipment and
AUX IN jacks using an audio cords (not supplied.)
230-
220
VOLTAGE
SETTING
To connect audio equipment with an optical digital
input terminal
You can record CD sound onto the connected digital
equipment.
1 1 0
220
VOLTAGE
SETTING
DIGITAL OUT
Protective
plug
[
]
OPTICAL
Using a screw driver, set the voltage selector so that the arrow
on printed on the rear points the correct voltage where you
use this unit. (See the back cover page.)
Before connecting the
other equipment,
remove the protective
plug from the terminal.
NOW, you can plug in the unit and other
connected equipment FINALLY!
To optical
digital input
Audio equipment
with an optical digital
input
Cancelling the Display Demonstration
When connecting the AC power cord into a wall outlet, the
unit automatically starts display demonstration.
Connect an optical digital cord (not supplied) between the
optical digital input terminal on the other equipment and the
DIGITAL OUT [OPTICAL] terminal.
On the unit ONLY:
CANCEL
/DEMO
To cancel the display demonstration, press DEMO.
When you press other buttons
The display demonstration stops temporarily. It will start
automatically again (if no operation is done for 2 minutes) until you
cancel it by pressing DEMO.
To start the display demonstration manually
Press and hold DEMO again for more than 2 seconds.
– 8 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Common Operations
Turning On or Off the Power
3 Press 4 or ¢ to adjust the
PRESET
minute, then press SET.
To turn on the unit, press
STANDBY
STANDBY/ON so that the STANDBY
lamp goes off.
STANDBY/ON
SET
STANDBY
To turn off the unit (on standby), press
STANDBY/ON
STANDBY/ON again so that the
STANDBY lamp lights up.
To check the clock time
DISPLAY
Press DISPLAY while playing any source.
• Each time you press the button, the source
indication and the clock time alternate on the
display.
A little power is always consumed even while the unit is on
standby.
To adjust the clock again
To switch off the power supply completely, unplug the AC
If you have adjusted the clock before, you need to press
CLOCK/TIMER repeatedly until “CLOCK” is selected.
• Each time you press the button, the clock/timer setting
modes change as follows:
power cord from the AC outlet.
When you unplug the AC power cord or if a power
failure occurs
The clock is reset to “– – : – –” soon, while the tuner preset stations
(see page 12) will be erased in a few days.
ON TIME
CLOCK
REC
DAILY
Canceled
ON TIME
Setting the Clock
If there is a power failure
The clock loses the setting and is reset to “– – : – –.” You need to set
the clock again.
Before operating the unit any further, first set the clock built
in this unit. You can set the clock whether the unit is on or
off.
On the unit ONLY:
CLOCK
/
TIMER
1 Press CLOCK/TIMER.
The hour digits start
flashing on the display.
2 Press 4 or ¢ to adjust the
PRESET
hour, then press SET.
SET
• If you want to correct the hour after pressing SET,
press CANCEL. The hour digits start flashing
again.
– 9 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Selecting the Sources
Adjusting the Volume
To listen to the FM/AM broadcasts, press FM/AM. (See
page 12.)
You can adjust the volume level only while the unit is turned
on.
To play back discs, press CD 6. (See pages 13 – 19.)
To play back tapes, press TAPE 3. (See page 20.)
To select the external equipment as the source, press AUX.
Turn the VOLUME control clockwise to
increase the volume or counterclockwise
to decrease it.
• The volume level can be adjusted in 32
steps (VOL MIN, VOL 1 — VOL 30,
and VOL MAX).
SLECT
When you press the play button for a particular source (AUX,
FM/AM, CD 6, and TAPE 3), the unit turns on (and the
unit starts playing the source if it is ready — COMPU PLAY
CONTROL).
When using the remote control, press VOLUME + to increase
the volume or press VOLUME – to decrease it.
For private listening
Setting the AM Tuner Interval Spacing
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers. Be sure to turn down the volume before
connecting or putting on headphones.
Some countries space AM stations 9 kHz apart, and some
countries use 10 kHz spacing.
On the unit ONLY:
DO NOT turn off (on standby) the unit with the
volume set to an extremely high level; otherwise, a
sudden blast of sound can damage your hearing,
speakers and/or headphones when you turn on the
unit or start playing any source next time.
REMEMBER you cannot adjust the volume level
while the unit is on standby.
When shipped, the unit is set to 9 kHz spacing.
To select 10 kHz, press
down ¡ when the unit is in standby mode.
“AM -- 10” appears on the display.
STANDBY/ON while holding
STANDBY
TUNING
STANDBY/ON
+
To turn down the volume level temporarily
Press FADE MUTING on the remote control.
FADE
MUTING
The volume level gradually decreases to “VOL MIN.”
To restore the sound, press the button again.
To change back to 9 kHz interval, press
while holding down 1 when the unit is in standby mode.
“AM -- 9” appears on the display.
STANDBY/ON
STANDBY
TUNING
STANDBY/ON
+
– 10 –
Download from Www.Somanuals.com. All Manuals Search And Download.
As you turn the control, the sound modes change as
follows:
Reinforcing the Bass Sound
This function only affects the playback sound, but does not
affect your recording.
D.CLUB
(Dance CLUB)
HALL
STADIUM
ROCK
SUBWOOFER
Turn the SUBWOOFER LEVEL control
clockwise to increase the subwoofer
sound or counterclockwise to decrease it.
• The subwoofer level can be adjusted in 4
steps (LEVEL 1 — LEVEL 4.)
LEVEL
OFF
(Canceled)
CLASSIC
POP
Surround modes*:
D.CLUB: Increases resonance and bass.
HALL: Adds depth and brilliance to the sound.
STADIUM: Adds clarity and spreads the sound, like in an
If you turn the control clockwise up to the
volume LEVEL 4, “MAX” flashes on the
display for a few seconds.
outdoor stadium.
SUBWOOFER LEVEL indicator always
lights up when the unit is on.
SEA (Sound Effect Amplifier) modes:
ROCK:
Boosts low and high frequency. Good for
acoustic music.
POP:
Good for vocal music.
CLASSIC: Good for classical music.
OFF: Cancels the sound mode.
* Surround elements are added to the SEA elements to create a
being-there feeling in your room.
When one of these modes is selected, the SOUND MODE
indicator lights up as —
When using the remote control, press SUBWOOFER LEVEL
to adjust the subwoofer level. The subwoofer level changes as
LEVEL 1 = LEVEL 2 = LEVEL 3 = LEVEL 4 =
(back to the beginning).
While one of the SEA modes (SEA elements without surround
elements) is selected, the SOUND MODE indicator lights up as
—
When using the remote control, press SOUND MODE to
adjust the sound mode.
• Each time you press the button, the sound modes change as
follows:
Selecting the Sound Modes
This function only affects the playback sound, but does not
affect your recording.
D.CLUB
(Dance CLUB)
HALL
STADIUM
ROCK
You can select one of the 6 preset sound modes (3 surround
modes and 3 SEA — Sound Effect Amplifier — modes).
OFF
(Canceled)
CLASSIC
POP
To select the sound modes, turn the
SOUND MODE control until the sound
SOUND
MODE
mode you want appears on the display.
SOUND MODE indicator
also lights up on the display
– 11 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to FM and AM Broadcasts
Before operating the tuner, make sure you have selected the
correct AM spacing intervals (see page 10).
On the unit ONLY:
1 Tune in the station you want to preset.
• See “Tuning in a Station” on the left column.
Tuning in a Station
1 Press FM/AM.
SET
The unit automatically turns on and tunes
in the previously tuned station (either FM
or AM).
2 Press SET.
• Each time you press the button, the
band alternates between FM and AM.
3 Press PRESET + or PRESET –
PRESET
2 Start searching for stations.
to select a preset number.
On the unit:
Press and hold TUNING + or
TUNING
TUNING – for more than 1
second.
SET
On the remote control:
Press and hold 4 or
4 Press SET again.
NEXT
PREV.
¢ for more than 1 second.
The unit starts searching for stations
and stops when a station of sufficient
signal strength is tuned in.
The tuned station in step 1 is stored in the preset number
selected in step 3.
• Storing a new station on a used number erases the
previously stored one.
If a program is broadcast in stereo, the ST (stereo)
indicator lights up.
To stop during searching, press TUNING + or TUNING –
(or 4 or ¢ on the remote control).
When you unplug the AC power cord or if a power
failure occurs
The preset stations will be erased in a few days. If this happens,
preset the stations again.
When you press TUNING + or TUNING – (or 4 or ¢ on
the remote control) briefly and repeatedly
The frequency changes step by step.
To change the FM reception mode
Tuning in a Preset Station
When an FM stereo broadcast is hard to receive or
FM MODE/
noisy, press FM MODE on the remote control so
that “MONO” appears and the MONO indicator
lights up on the display. Reception improves.
STILL
1 Press FM/AM.
The unit automatically turns on and
tunes in the previously tuned station
(either FM or AM).
To restore the stereo effect, press FM MODE
again so that “STEREO” appears on the diplay and the
MONO indicator goes off from the display.
In this stereo mode, you can hear stereo sounds when a
program is broadcast in stereo.
• Each time you press the button, the
band alternates between FM and AM.
2 Select a preset number.
On the unit:
PRESET
Press PRESET + or PRESET –.
Presetting Stations
You can preset 30 FM and 15 AM stations.
In some cases, test frequencies have been already memorized
for the tuner since the factory examined the tuner preset
function before shipment. This is not a malfunction. You can
preset the stations you want into memory by following the
presetting method.
On the remote control:
1
4
2
5
3
6
9
Press the number buttons.
Ex.: For preset number 5, press 5.
For preset number 15, press +10
then 5.
7
8
•
There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step 1 again.
+10
10
For preset number 20, press +10,
then 10.
For preset number 25, press +10, +10, then 5.
For preset number 30, press +10, +10, then 10.
– 12 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Discs
This unit has been designed to playback the following CDs:
Audio CD, Video CD, CD-R, and CD-RW.
About the disc indicators
Each disc indicator corresponds to the disc tray of the same number.
Continued use of irregular shape discs (heart-shape,
octagonal, etc.) can damage the unit.
Disc number
When playing a CD-R or CD-RW
Disc indicator
Disc marker
User-edited CD-Rs (Recordable) and CD-RWs
(Rewritable) can be played back only if they are already
“finalized.”
• You can play back your original CD-Rs or CD-RWs
recorded in music CD format. (However, they may not
be played back depending on their characteristics or
recording conditions.)
• The disc marker lights up for the disc number you have selected.
• The disc indicator rotates while the corresponding disc is being
played.
• The disc indicator goes off when the unit has detected that there is
no disc on the corresponding disc tray.
• Before playing back CD-Rs or CD-RWs, read their
instructions or cautions carefully.
Playing Back the Entire Discs — Continuous
Play
• Some CD-Rs or CD-RWs may not be played back on
this unit because of their disc characteristics, damage or
stain on them, or if the player’s lens is dirty.
• CD-RWs may require a longer readout time. (This is
caused by the fact that the reflectance of CD-RWs is
lower than for regular CDs.)
You can play discs continuously.
1 Load discs.
2 Press one of the disc number
buttons (CD1, CD2 or CD3)
for the disc you want to play.
CD play starts from the first track of
the selected disc.
Loading Discs
Whenever you press 0, the source automatically
changes to CD.
Track number of the currently playing disc is
flashing. (Track numbers exceeding 16 are
not displayed.)
1 Press 0.
The unit automatically turns on and the
carrousel comes out.
2 Place one or two discs correctly on the front
slots of the carrousel, with its label side up.
Track number
Elapsed playing time
• Pressing CD 6 instead of the disc number buttons
starts playing back if a disc is on the tray.
INCORRECT
CORRECT
When you turn on the unit, ALL DISC indicator lights up on
the display automatically. If you do not want all the discs to
play back, select 1 DISC by pressing REPEAT.
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
REPEAT 1
ALL DISC
1 DISC
REPEAT ALL DISC
REPEAT 1 DISC
DISC CHANGE
3 If you wish to load a third disc,
ALL DISC:
1 DISC:
Plays all loaded disc.
Plays back one disc.
press DISC CHANGE on the unit
or DISC SKIP on the remote
control.
The carrousel rotates by 120˚.
DISC SKIP
To stop during play, press 7.
To remove the disc, press 0.
4 Press 0 again.
The carrousel closes.
– 13 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Programming the Playing Order of the Tracks
— Program Play
Disc playback sequence (when ALL DISC is selected)
When 3 discs are loaded on the disc trays, they are played in one of
the following sequences.
• When CD1 is pressed : CD1 ] CD2 ] CD3 (then stops)
• When CD2 is pressed : CD2 ] CD3 ] CD1 (then stops)
• When CD3 is pressed : CD3 ] CD1 ] CD2 (then stops)
* When only 2 discs are loaded, they are played in the same order,
but the disc tray without a disc is skipped.
You can arrange the order in which the tracks play before you
start playing. You can program up to 32 tracks.
• To use Repeat play (see page 15) for Program play, press
REPEAT after starting Program play.
On the unit ONLY:
1 Load discs.
Basic Disc Operations
• If the current playing source is not the CD player, press
CD 6, then 7 before going to the next step.
While playing a disc, you can do the following operations.
EAPROGRAM M
2 Press PROGRAM.
To exchange discs during playback of another
Press DISC CHANGE to change the disc and the
DISC CHANGE
carrousel comes out.
If you change discs during play, the current play
will not stop until all discs you have changed are
played.
To close the carrousel, press DISC CHANGE or 0.
3 Press one of the disc number
buttons (CD1, CD2 or CD3)
to select the disc number
you want to play.
Track number
To skip to the another disc in the carrousel
Press DISC SKIP on the remote control.
DISC SKIP
To stop play for a moment
Press CD 6.
While pausing, “PAUSE” appears on the
display.
To resume play, press CD 6 again.
SLECT
Disc number
Program step number
To locate a particular point in a track
4 Press 4 or ¢ to select the track number,
then press SET.
During play, press and hold 1 or ¡.
TUNING
• 1: Fast reverses the disc.
Each time you select a track and press SET, the selected
track number is added to the CD track number indicator.
• ¡: Fast forwards the disc.
When using the remote control, press and
hold 4 or ¢.
PRESET
SET
To go to another track
Press 4 or ¢ repeatedly before or
during playback.
PRESET
• 4:Goes back to the beginning of the
current or previous tracks.
• ¢:Skips to the beginning of the next or
succeeding tracks.
If you press and hold 4 or ¢ on the unit before or
during play
You can change the tracks continuously.
5 Program other tracks you want.
• To program tracks from the same disc, repeat step 4.
• To program tracks from a different disc, repeat steps 3
and 4.
To go to another track directly using the number buttons
Pressing the number button(s) before or
1
2
3
6
9
during play allows you to start playing the
track number you want.
4
5
7
8
6 Press CD 6.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
The tracks are played in the order you
+10
10
have programed.
SLEC
For track number 32, press +10, +10, +10, then 2.
– 14 –
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop during play, press 7.
To stop during play, press 7.
• Random play also stops when 0 is pressed.
To exit from Program play mode, press PROGRAM again
before or after play so that the unit enters Continuous play
mode. (The program you have made is stored in memory
until you turn off the unit or erase the program.)
To exit from Random play mode, press RANDOM again
during play so that the unit enters Continuous play mode.
To use Random play mode, you have to exit from the
Program play mode.
To modify the program
Before playing, you can erase the programed
CANCEL
/DEMO
tracks shown on the display by pressing CANCEL.
• Each time you press the button, the last
If you press ¢ or 4
Skips to the next track selected randomly.
programmed track is erased from the program.
Repeating Tracks or Discs — Repeat Play
To check the program during play, press ¢ (or
4) so that the playing track will change according to the
program (or reverse) order.
You can have all the discs, the program or the individual track
currently playing repeat as many times as you like.
To add tracks in the program before play, simply select the
disc numbers and/or track numbers you want to add by
following steps 3 and 4 of the programming procedure on
page 14.
REPEAT M
To repeat play, press REPEAT during or before
playing.
• Each time you press the button, Repeat play
mode changes as follows, and the following
indicator lights up on the display:
To erase the entire program before or during play, press 7
twice.
• Ejecting a carrousel will also erase the stored memory.
REPEAT 1
ALL DISC
1 DISC
REPEAT ALL DISC
REPEAT 1 DISC
REPEAT 1:
Repeats one track on one disc.
REPEAT 1 DISC*: Repeats all the tracks on one disc.
REPEAT ALL DISC: Repeats all the tracks on all the discs.
If you try to program a 33rd track
“FULL” will appear on the display.
*
REPEAT 1 DISC is not used for Program play.
To cancel Repeat play, press REPEAT repeatedly until the
REPEAT indicator (REPEAT 1, REPEAT 1 DISC or
REPEAT ALL DISC) goes off from the display.
• Repeat play and Random play cannot be used at the same
time.
If your entry is ignored
You have tried to program a track from an empty tray, or a track
number that does not exist on the disc. Such entries are ignored.
Playing at Random — Random Play
Prohibiting Disc Ejection — Tray Lock
The tracks of the selected disc will play at random.
You can prohibit disc ejection from the unit and lock discs.
• This operation is possible only while the unit is on with
disc selected as the source.
1 Load a disc.
• If the current playing source is not the CD player, press
CD 6, then 7 before going to the next step.
On the unit ONLY:
M
RANDOM
2 Press RANDOM so that “RANDOM”
appears on the display.
To prohibit disc ejection, press 0 for the carrousel while
holding 7.
“LOCKED” appears for a while, and the carrousel is locked.
The RANDOM indicator also lights up on the
display.
To cancel the prohibition and unlock the discs, press 0 for
the carrousel while holding 7.
“UNLOCKED” appears for a while, and the carrousel is
unlocked.
If you try to eject discs
“LOCKED” appears to inform you that the Tray Lock is in use.
• The tracks are played automatically at random. Random
play ends when all tracks are played once.
– 15 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
To locate a particular point in a track
During play, press and hold 1 or ¡.
• 1: Fast reverses the disc.
Playing Video CDs
TUNING
You can play Video CDs either with or without the PBC
(PlayBack Control) function.
Before playing, set video output correctly according to your TV
system. Refer to “Connecting Other Equipment” on page 8.
• ¡: Fast forwards the disc.
Each time you press the button, “SCAN”
appears upper left on the TV screen. When
using the remote control, press and hold
4 PREV. or ¢ NEXT.
1 Turn on the TV and select the video input so
that you can view the pictures from the unit.
• Refer also to the manual supplied with your TV.
NEXT
PREV.
To go to another track
Press 4 or ¢ repeatedly before or
during playback.
• 4: Goes back to the beginning of
the current or previous tracks.
• ¢: Skips to the beginning of the
next or succeeding tracks.
2 Prepare the discs.
PRESET
• Refer to “Loading Discs” on page 13.
When you load video CDs, “VCD/CD” appears on the
display.
NEXT
PREV.
NEXT
PREV.
If you press and hold 4 or ¢ on the unit before or
during play
You can change the tracks continuously.
3 Start playback of the discs.
You can play Video CDs by using same buttons for
playing audio CD both on the unit and on the Remote
Control.
• Refer to “Basic Disc operations” on page 14.
Special Plays for Video CDs
To stop during play, press 7.
To stop play and remove the disc, press 0 for the disc being
You can use the following special plays for Video CDs both
with and without PBC function.
played.
To enjoy slow motion playback
Please make sure that the Video CDs to be played
is not flawed optically, as this may cause a
distorted sound or the unit to malfunction.
SLOW
Press SLOW on the remote control during
playback.
A still picture appears on the screen.
Each time you press the button, slow motion speed
changes as follows:
To adjust the color system — NTSC/PAL
According to a Video CD or the color system used
SLOW 1/8
SLOW 1/4
SLOW 1/2
TAPE A
on your TV, press TAPE A on the unit while the
Normal play
unit is turned off (on standby.) When you press this
button for the first time, the present color system
appears in the display.
• To resume normal playback, press CD 6.
Each time you press the button, the following appears in the
display window and on the TV screen.
During slow motion playback
No sound comes out.
NTSC
PAL
• Be sure to select either NTSC or PAL position when the picture
on the TV screen appears correctly.
About the color system
When wrong position selected, picture on TV screen will lose the
color and change into monochrome view.
– 16 –
Download from Www.Somanuals.com. All Manuals Search And Download.
To play Still- and Frame-by-Frame pictures
1
4
2
5
3
6
9
3 Press the number button of the
video intro you want to
playback.
FM MODE/
STILL
Press STILL on the remote control during
playback.
When you press the button, playback pauses and a
still picture is shown on the TV screen. Each time
7
8
Playback starts from the selected track.
+10
10
you press the button, still pictures advance by one frame.
• To resume normal playback, press CD 6.
To stop and cancel the video intro, press 7.
During still- and frame-by-frame playback
No sound comes out.
To view the Highlights of a Video CD
You can view 9 highlights scenes of the selected track on a
video CD. These highlight scenes are created by dividing the
track equally into 9 portions and the beginning (5 seconds
each) of those 9 scenes are shown on the TV screen.
To view Operation Status
You can view operation status about the track being played
on the TV screen.
1 Press one of the disc number
buttons (CD1, CD2 and CD3)
on the unit or on the remote
control and the number
button of the track you want
to view the highlights.
ON SCREEN
Press ON SCREEN on the remote control.
The information about the disc being played are
shown on TV: disc number, track number and
playing time.
DISC 1
01 00:00:00
Playback starts.
HIGHLIGHT
2 Press HIGHLIGHT after a picture
appears on the TV screen.
The highlight starts and shows in sequence (the
first 5 seconds of nine divided highlight
scenes) on the TV screen for 1 minute.
ON SCREEN
To erase operation status, press ON SCREEN
again. All the information about the track being
played disappear.
HIGHLIGHT
To view the Video Intro of a Video CD
1
4
7
2
5
8
3
6
9
You can view contents of a video CD, the first 5 seconds of
each track on the disc.
• For a video CD with PBC function, cancel the PBC
function. Refer to “Playing Video CDs without Using
Menu Screen” on page 19.
3 Press the number button of the
highlight scene you want to
playback.
1
4
2
5
3
6
9
1 Press one of the disc number
buttons (CD1, CD2 and CD3)
on the unit or on the remote
control to select the disc you
want to view the video intro.
Playback starts.
7
8
Playback starts from the beginning of
the selected scene.
• If you do not select any highlight
+10
10
scene to playback for 1 minute, another 9 highlight
scenes of the next track will be shown on the TV screen.
V. INTRO
2 Press V.INTRO after a picture
appears on the TV screen.
To stop and cancel the highlight, press 7.
The video intro starts and shows in sequence
(the first 5 seconds of nine tracks) on the TV
screen. If the disc consists more than 9 tracks, remaining
tracks are shown after the first 9 tracks finish showing.
During video intro or highlight play
The picture shown on the TV screen may be partially distorted,
resulting from noises or incorrect manufacturing of the disc.
VIDEO INTRO
1
4
7
2
5
8
3
6
9
– 17 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Playing Video CDs with PBC Function
1 Turn on the TV and select the video input so
that you can view the pictures from the unit.
Refer also to the manual supplied for your TV.
The PBC (Playback Control) function allows you to enjoy
menu-driven operation and high resolution still pictures.
2 Prepare Video CDs.
Refer to “Loading Discs” on page 13.
“VCD/CD” and then “PBC” indicator lights on the
display.
This unit is designed for playback of video CDs,
version 1.1 and 2.0. Only with version 2.0, you can
call up “on screen menu” function. This unit will not
play back any other video CDs other than 1.1 and
2.0 versions.
3 Start playback of the Video CD.
Press the CD 6 SELECT to start playback
of the currently selected disc or press the
Menu-driven operation
You can interact with the TV screen using menu screens to
select and play items of the disc.
SELECT
CD1, CD2 or CD3 to select the disc and start
playback.
High-resolution still pictures
You can view high-resolution still pictures having quality
four times higher than playback pictures.
Playing Video CDs with Using Menu Screens
When you start playing a video CD with the PBC function, a
selection menu appears on the TV screen. This menu shows a
list of items to select and play.
4 Select the item you want to playback when a
selection menu appears on the TV.
VCD NUMBER
Press VCD NUMBER + or – to select the
• The playback operation procedure may differ depending on
the disc you use.
item number. Then press CD 6 SELECT to
start the playback.
Button controls:
VCD NUMBER + or –
VCD NUMBER
SELECT
Select a specific menu item from the TV
screen or the monitor.
PREV. 4 or ¢ NEXT
PRESET
NEXT
Move through menu screens.
PREV.
CD 6 SELECT
When “SELECT XX” appears on the TV
screen, pressing this button jumps to the
selected picture or program.
SELECT
RETURN
RETURN
Press the button once, return to the previous
menu or screen.
7 (stop)
Press and hold the button for a few seconds, quit the
operation of the video CDs.
PBC
PBC
Each time you press the button, PlayBack
Control function is set to on/off. When you
change the function, video CDs program
automatically starts again from the beginning of
selected function.
• You cannot call up menu screen by pressing this button.
– 18 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Flow of Menu Play Operation
Playing Video CDs without Using Menu Screen
You can cancel the PBC function and play the disc without
using menu screen.
Some discs may show moving pictures or divided screens.
• When a list of items appears, you can select the item you
want to play back by pressing VCD NUMBER + or –
repeatedly.
1 Turn on the TV and select the video input so
that you can view the pictures from the Unit.
Refer also to the manual supplied for your TV.
VCD NUMBER
For example, “SELECT 01” appears on the
screen and “SEL-01 ” on the display.
• When moving picture appears, you
can select a moving picture by either
pressing PREV. 4 or ¢ NEXT or
pressing CD 6 SELECT after
selecting the item number by VCD
NUMBER – or + while the moving
picture you want to view is being played back.
“SELECT XX” appears on the screen.
PRESET
2 Prepare a Video CD.
NEXT
Refer to “Loading Discs” on page 13.
PREV.
PBC
3 Press PBC on the unit.
SELECT
• When a menu appears after the item you
4 Start playback of the Video CD.
Press the CD 6 SELECT to start playback
of the currently selected disc or press the
selected has finished playing, you can select
another number of the item you want to view next.
• If the video CD has more than 2
SELECT
CD1, CD2 or CD3 to select the disc and start
playback.
PRESET
pages of menu, you can view the
NEXT
remaining items by pressing the
¢ NEXT. If you want to go back to
the previous menu, press the PREV.
4.
PREV.
To stop during playback, press 7.
To restore the PBC function, press
PBC.
RETURN
• After playback, press
RETURN to go back
to the previous screen. Each time you press the
button, you can go back to the previous screen up
to the beginning of the program one by one.
• If you want to stop Menu Play, press 7 for more than 2
seconds. Some discs may return you to the menu screen
shown before playback.
When the PBC function is canceled,
some pictures, such as still pictures, may not be played back.
If “NEXT” or “PREVIOUS” is shown on the TV
screen (for some Video CDs it may be hidden or
illustrated),
you can move to the next or previous screen by pressing ¢ NEXT
or PREV. 4. By pressing
RETURN, you can also go back to
the previous screen, the opening menu screen, or some other screen
(this depends on how the Video CD has been programmed.)
TV Screen
Main menu
1. ......
2. ......
3. ......
VCD NUMBER +/–
NEXT
1. Sub menu
1. ......4. ......
2. ......
2. Still Picture
Playback
3. Sub menu
1. ......
2. ......
3. Sub menu
4. ......
5. ......
RETURN
RETURN
3. ......
3. ......
6. ......
PREV.
VCD NUMBER +/–
1. Sub-sub menu
2. Still Picture
4. Moving
Pictures
3. Moving
Pictures
1. ......
2. ......
3. ......
Playback
– 19 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Tapes
To stop during play, press 7.
Playing Back a Tape
To operate the other deck, press TAPE A or TAPE B (or
TAPE A/B on the remote control), then TAPE 3.
1 Press EJECT (0) for the deck you want to
To fast-forward the tape, press ¡ (or ¢ on the remote
control). The tape running indicator (3) starts flashing
quickly.
use.
To rewind the tape, press 1 (or 4 on the remote
control). The tape running indicator (2) starts flashing
quickly.
To remove the cassette, press 0 EJECT for deck A or
EJECT 0 for deck B.
EJECT
EJECT
For Deck B
For Deck A
EJECT
EJECT
2 Put a cassette in with the exposed part of the
tape down.
• You can play back only type I.
3 Close the cassette holder gently.
If you put cassettes in both decks A and B, the last deck
which you have put a cassette into is selected.
To operate the other deck, press TAPE A or TAPE B (or
TAPE A/B on the remote control).
The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.
4 Press TAPE 3.
The tape play starts and the tape running
indicator (3) starts flashing slowly.
When the tape plays to the end, the deck
automatically stops.
TAPE
– 20 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
IMPORTANT:
Recording a Tape on Deck B
• It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
• The recording level is automatically set correctly, so it is
not affected by the VOLUME control, the SOUND MODE
control and the SUBWOOFER LEVEL control. Thus,
during recording you can adjust the sound you are actually
listening to without affecting the recording level.
• While recording, you can hear sound modes through the
speakers or headphones. However, the sound is recorded
without these effects (see page 11).
On the unit ONLY:
1 Press EJECT 0 for the deck B.
• If recordings you have made have excessive noise or static,
the unit may be too close to a TV. Place the unit away from
the TV.
• You can use type I tape for recording.
EJECT
EJECT
To protect your recording
Cassettes have two small tabs
on the back to protect
unexpected erasure or re-
recording.
To protect your recording,
remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.
2 Put a recordable cassette in with the exposed
part of the tape down.
3 Close the cassette holder gently.
To keep the best recording and playback sound quality
If the heads, capstans, and pinch rollers of the cassette decks
become dirty, the following will occur:
• Impaired sound quality
• Discontinuous sound
• Fading
4 Start playing the source — FM, AM, CD
player or auxiliary equipment connected to
AUX IN jacks.
• When you want to use the dubbing method, see
“Dubbing Tapes” on page 22.
• When the source is CD, you can also use CD Synchro
Recording (see “CD Synchronized Recording” on
page 22.)
• Incomplete erasure
• Difficulty in recording
To clean the head, capstan, and pinch roller
Use a cotton swab moistened with alcohol.
REC START
/STOP
5 Press REC START/STOP.
The REC (recording) indicator lights up on
the display and recording starts.
Capstan
Erase head
To stop during recording, press REC START/STOP again
or 7.
Pinch roller
Head
To remove the cassette, press EJECT 0 for deck B.
To demagnetize the head
Turn off the unit, and use a head demagnetizer (available at
electronics and audio shops).
– 21 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing Tapes
CD Synchronized Recording
You can easily record a CD onto a tape.
• You can also record the tracks in order you have made the
program.
On the unit ONLY:
1 Press TAPE 3, then 7.
On the unit ONLY:
1 Put a recordable cassette into deck B.
2 Place a disc correctly on the circle of the disc
tray, with its label side up.
2 Put the source cassette in deck A, and a
3 Press one of the disc number buttons (CD1,
CD2 or CD3) to select the disc, then 7.
recordable cassette into deck B.
ADUBBING
3 Press DUBBING.
Dubbing starts.
“DUBBING” appears, and the REC
(recording) indicator lights up on the display.
ACD
P
REC START
4 Press CD REC START.
“CD REC” appears, and the REC
(recording) indicator lights up on the display.
To stop during dubbing, press 7.
To remove the cassette, press 0 EJECT for deck A and
EJECT 0 for deck B.
Deck B starts recording and the CD player starts playing.
When the recording is done, the CD player and deck B
stop.
To stop during CD Synchronized Recording, press 7.
To remove the cassette, press EJECT 0 for deck B.
– 22 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Microphones
If you use the following sources as the playing source
for Vocal Masking, you cannot get the satisfactory
results
You can enjoy singing along (Karaoke) and microphone
mixing.
• Radio programs — a radio signal is not as reliable as the signals
coming from a tape or CD.
• Monaural sources.
• Poorly dubbed tapes.
• Sources recorded with duets, strong echo, a chorus, or only a few
instruments.
IMPORTANT:
• Always set the MIC LEVEL to MIN when connecting
or disconnecting the microphone.
• When you do not use the microphone, keep the
microphones unconnected.
If howling or squealing (feedback) occurs while using the
microphone, take the following actions to prevent these
noises.
• Adjust the MIC LEVEL and VOLUME controls.
• Avoid pointing the microphone towards the speakers.
To apply an echo to your voice
ECHO
Press ECHO on the remote control so that the
echo ( ) indicator lights up on the display.
Each time you press the button, the echo level
changes as follows:
ECHO 1 (
)
ECHO 2 (
)
Singing Along (Karaoke)
ECHO OFF (
)
As the number increases, a stronger echo effect applies to
your voice.
You can enjoy singing along (Karaoke) using Vocal Masking.
Vocal Masking reduce the lead vocal of the playing source
while playing back a stereo source.
• This function cannot be used for multiplex discs or tapes.
Microphone Mixing
1 Rotate MIC LEVEL to MIN.
When you use microphone with any playback source, follow
the procedure below.
2 Connect the microphone (not supplied) by
1 Rotate MIC LEVEL to MIN.
plugging it into the MIC jack.
The karaoke indicator (
) lights up on the display.
2 Connect the microphone (not supplied) by
plugging it into the MIC jack.
3 Start playing the source — CD, tape or other
connected component.
3 Start playing the source — CD, tape or other
connected component.
KARAOKE
4 Press KARAOKE on the remote
control.
“V.MASK” appears on the display for a few
seconds.
4 Rotate MIC LEVEL and VOLUME
controls as you sing into the
microphone.
• By pressing REC START/STOP, you
can record your singing along if you
want. (For more details, see page
21.)
5 Rotate MIC LEVEL and VOLUME
controls as you sing into the
microphone.
When you finish singing, cancel the
Karaoke function by pressing
• To stop during recording, press 7.
KARAOKE.
• By pressing REC START/STOP, you
can record your singing along if you
want. (For more details, see page 21.)
• To stop during recording, press 7.
– 23 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Multiplex Discs — Multiplex Sound
(MPX)
In a multiplex karaoke disc, the instrumental part is recorded
on the left channel and the vocal part is recorded on the right
channel. By using Multiplex Sound (MPX) function, you can
select the channel to play back.
• This function cannot be used for multiplex karaoke tapes.
On the remote control ONLY:
MPX
1 Press MPX during play.
• Each time you press the button, output sound
changes as follows:
Lch MONO: Only the left channel (instrumental parts) is
played back through both the right and left
speakers.
Rch MONO: Only the right channel (vocal parts) is
played back through both the right and left
speakers.
STEREO: Cancels the Multiplex Sound (MPX)
(normal stereo playback resumes).
When you finish enjoying Karaoke
Cancel the Multiplex Sound (MPX) function; otherwise, normal
playback will not be possible.
Adjusting Key Control
You can adjust the key of the source if it’s not suite on you.
• This function is available only when you use CDs for
karaoke source.
On the remote control ONLY:
1 Start the source CD.
KEY CONTROL
I
i
2 Press KEY CONTROL.
To lower the key, press KEY CONTROL I
from “KEY 0” to “KEY –7.”
To raise the key, press KEY CONTROL i
from “KEY 0” to “KEY +7.”
To cancel the key control, press KEY CONTROL I or i
until “KEY 0” appears on the display.
If you use the key control function
• When you change the key, the key position remains unless you
change it again. To restore the original key of the source, refer to
“To cancel the key control” above.
• You cannot adjust the key while recording.
• When you change the source, key control function is canceled and
the key returns to “KEY 0.”
– 24 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
There are three timers available — Daily Timer, Recording
Timer, and Sleep Timer.
CLOCK
TIMER
2 Press CLOCK/TIMER again.
“ON TIME” appears for 2 seconds, then the
unit enters on-time setting mode.
/
Before using the timers, you need to set the clock built in the
unit. (See “Setting the Clock” on page 9.)
Using Daily Timer
With Daily Timer, you can wake to your favorite music or
radio program. You can set the timer whether the unit is on or
off.
PRESET
3 Set the on-time you want the unit
to turn on.
How Daily Timer actually works
The unit automatically turns on, set the volume level to the
preset level, and starts playing the specified source when the
1) Press 4 or ¢ to set the hour, then
press SET.
2) Press 4 or ¢ to set the minute,
then press SET.
on-time comes (the
indicator flashes while the timer is
SET
operating). Then, when the off-time comes, the unit
automatically turns off (stands by).
“OFF TIME” appears for 2 seconds, then
the unit enters off-time setting mode.
The timer setting remains in memory until you change it.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
• If you have made a mistake while setting timer, press
CANCEL. (However, this does not always work. If
CANCEL does not work, press CLOCK/TIMER repeatedly
and start from step 1 again.)
4 Set the off-time you want the unit
to turn off (on standby).
1) Press 4 or ¢ to set the hour, then
press SET.
PRESET
2) Press 4 or ¢ to set the minute,
then press SET.
SET
The unit enters source selecting mode.
Before you start...
• When using a CD as the source to play —
– Make sure there is a CD on the currently selected disc
number tray.
• When using a tape as the source to play —
– Make sure that a tape is in the deck whose deck
indicator (A or B) is lit on the display.
• When using the external component as the source to
play —
– Set the timer equipped with the external component at
the same time.
5 Press 4 or ¢ to select the
source to play, then press SET.
• Each time you press 4 or ¢, the
source changes as follows:
PRESET
On the unit ONLY:
CLOCK
1 Press CLOCK/TIMER repeatedly
/
TIMER
TUNER AM
CD
TUNER FM
AUX
until “DAILY” appears on the
display.
SET
TAPE
indicator lights up and the DAILY (daily
timer) indicator also starts flashing on the display.
TUNER FM: tunes into a specified preset FM station.
= go to step 6.
TUNER AM: tunes into a specified preset AM station.
= go to step 6.
CD:
plays a disc from the first track.
= go to step 7.
plays a tape in deck A or B. = go to step 7.
plays an external source. = go to step 7.
TAPE:
AUX:
• Each time you press the button, the timer setting modes
change as follows:
ON TIME
REC
DAILY
Canceled
CLOCK
(See page 9.)
ON TIME
– 25 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Using Recording Timer
PRESET
6 When you have selected “TUNER
FM” or “TUNER AM” in step 5.
Select a preset station number.
Press 4 or ¢ to select the preset
station number, then press SET.
With Recording Timer, you can make a tape of a radio
broadcast automatically. You can set the timer whether the
unit is on or off.
The unit enters volume setting mode.
SET
How Recording Timer actually works
The unit automatically turns on, tunes into the specified
station, sets the volume level to “VOL MIN,” and starts
recording when the on-time comes (the
indicator flashes
while the timer is operating). Then, when the off-time comes,
the unit automatically turns off (stands by).
The timer setting remains in memory until you change it.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
• If you have made a mistake while setting the timer, press
CANCEL. (However, this does not always work. If
CANCEL does not work, press CLOCK/TIMER repeatedly
and start from step 1 again.)
7 Press 4 or ¢ to set the
volume level.
PRESET
• You can select the volume level from
VOL MIN, VOL 1 — VOL 30, and
VOL MAX.
On the unit ONLY:
1 Put a recordable cassette into deck B.
2 Press CLOCK/TIMER repeatedly
until “REC” appears on the
display.
SET
CLOCK
8 Press SET to complete the Daily
Timer setting.
/
TIMER
The DAILY (daily timer) indicator stops
flashing and remains lit. The settings you have
indicator lights up and the REC
(recording timer) indicator also starts flashing on the
display.
done are shown on the display in sequence for your
confirmation.
STANDBY
9
Press
STANDBY/ON to
STANDBY/ON
turn off the unit (on standby)
if you have set the Daily Timer
with the unit turned on.
If the unit is turned on when the timer-on time comes
Daily Timer does not work.
• Each time you press the button, the timer setting modes
change as follows:
To turn on or off Daily Timer after its setting is done
ON TIME
REC
DAILY
CLOCK
1
Press CLOCK/TIMER repeatedly until
“DAILY” appears on the display.
/
TIMER
Canceled
CLOCK
(See page 9.)
ON TIME
2
To turn off the Daily Timer, press
CANCEL.
The DAILY (daily timer) indicator goes off
from the display (“OFF” appears for a while).
The Daily Timer is canceled, but the setting
for the Daily Timer remains in memory.
CLOCK
/TIMER
3 Press CLOCK/TIMER again.
“ON TIME” appears for 2 seconds, then the
unit enters on-time setting mode.
CANCEL
/DEMO
SET
To turn on the Daily Timer, press SET.
The DAILY (daily timer) indicator lights up on
the display. The settings you have done are
shown on the display in sequence for your
confirmation.
– 26 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Sleep Timer
4 Set the on-time you want the unit
to turn on.
PRESET
With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
1) Press 4 or ¢ to set the hour, then
press SET.
2) Press 4 or ¢ to set the minute,
then press SET.
How Sleep Timer actually works
The unit automatically turns off after the specified time
length passes.
“OFF TIME” appears for 2 seconds, then
the unit enters off-time setting mode.
SET
On the remote control ONLY:
5 Set the off-time you want the
unit to turn off (on standby).
1) Press 4 or ¢ to set the hour, then
press SET.
PRESET
SLEEP
1 Press SLEEP.
The time length until the shut-off time appears
and the SLEEP indicator starts flashing on the
display.
2) Press 4 or ¢ to set the minute,
• Each time you press the button, the time length changes
as follows:
then press SET.
The unit enters preset station selecting
mode.
SET
SLEEP10 SLEEP20 SLEEP30 SLEEP60
SLEEP120
SLEEP90
OFF
(Canceled)
2 Wait for about 5 seconds after specifying the
6 Select the preset station.
1) Press 4 or ¢ to select the band
(“TUNER FM” or “TUNER AM”),
then press SET.
PRESET
time length.
The SLEEP indicator stops flashing and remains lit.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 5 seconds.
2) Press 4 or ¢ to select a preset
channel number, then press SET.
The REC (recording timer) indicator stops
flashing and remains lit. The settings you
have done are shown on the display in
sequence for your confirmation.
SET
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly until “OFF”
appears on the display so that the SLEEP indicator goes off
from the display.
STANDBY
7 Press
STANDBY/ON to
turn off the unit (on standby) if
necessary.
STANDBY/ON
• Sleep Timer is also canceled when you turn off the unit.
Timer Priority
If you want to listen to another source while recording
Press REC START/STOP or 7 to stop recording. Without stopping
it, you cannot change the source.
Since each timer can be set separately, you may wonder what
happens if the setting for these timers overlaps.
Here are examples.
To turn on or off Recording Timer after its setting is
done
• Recording Timer has priority over Daily Timer.
If Daily Timer is set to come on while Recording Timer is
operating, Daily Timer will not come on at all.
CLOCK
1
Press CLOCK/TIMER repeatedly until
“REC” appears on the display.
/
TIMER
• If Sleep Timer overlaps with another timer (either Daily
Timer or Recording Timer), a timer with the earlier shut-off
time has priority.
2
To turn off the Recording Timer, press
CANCEL.
The REC (recording timer) indicator goes off
from the display (“OFF” appears for a while).
The Recording Timer is canceled, but the
CANCEL
/DEMO
7:30
AM 6:00
6:30
7:00
Sleep Timer
setting for the Recording Timer remains in memory.
Recording Timer
canceled.
SET
To turn on the Recording Timer, press SET.
The REC (recording timer) indicator lights up
on the display. The settings you have done are
shown on the display in sequence for your
confirmation.
When using the Recording Timer and Sleep Timer at the
same time, pay special attention to the shut-off time.
– 27 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
To get the best performance of the unit, keep your discs, tapes, and mechanism clean.
Handling discs
Handling cassette tapes
• Remove the disc from its case by holding it
at the edge while pressing the center hole
lightly.
• If the tape is loose in its cassette, take up
the slack by inserting a pencil in one of the
reels and rotating.
• Do not touch the shiny surface of the disc,
or bend the disc.
• If the tape is loose, it may get stretched,
cut, or caught in the cassette.
• Put the disc back in its case after use to
prevent warping.
• Be careful not to touch the tape surface.
• Be careful not to scratch the surface of the
disc when placing it back in its case.
• Avoid exposure to direct sunlight,
temperature extremes, and moisture.
• Avoid the following places to store the
tape:
To clean the disc
— In dusty places
Wipe the disc with a soft cloth in a straight
line from center to edge.
— In direct sunlight or heat
— In moist areas
— Near a magnet
DO NOT use any solvent — such as conventional
record cleaner, spray, thinner, or benzine — to clean
the disc.
– 28 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you are having a problem with your unit, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person,
such as your dealer, for service.
Symptom
Cause
Action
Unable to cancel the display demonstration.
Other buttons are pressed to cancel the
display demonstration.
Press DEMO on the unit. (See page 8.)
No sound is heard.
Connections are incorrect or loose.
Check all connections and make
corrections. (See pages 6 to 8.)
Hard to listen to broadcasts because of
noise.
• Antennas are disconnected.
• Reconnect the antennas correctly and
securely.
• The AM loop antenna is too close to the
unit.
• The FM antenna is not properly extended
• Change the position and direction of the
AM loop antenna.
• Extend the FM antenna at the best
and positioned.
position.
The disc sound is discontinuous.
The disc is scratched or dirty.
Clean or replace the disc. (See page 28.)
The carrousel does not open or close.
• The AC power cord is not plugged in.
• The carrousel is locked.
• Plug the AC power cord.
• Unlock the carrousel. (See page 15.)
The disc does not play.
The disc is placed upside down.
Place the disc with the label side up.
Turn on the unit.
The cassette holders cannot be opened.
Power supply from the AC power cord has
been cut off while the tape was running.
Impossible to record.
Small tabs on the back of the cassette are
removed.
Cover the holes with adhesive tape.
Stereo effect is lost.
Vocal Masking is activated.
Cancel the Vocal Masking. (See page 23.)
Operations are disabled.
The built-in microprocessor may
malfunction due to external electrical
interference.
Unplug the AC power cord and then plug it
back in.
Unable to operate the unit from the remote
control.
• The path between the remote control and
the remote sensor on the unit is blocked.
• The batteries are exhausted.
• Remove the obstruction.
• Replace the batteries.
– 29 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Amplifier section — CA-MXG65V/CA-MXG68V
Output Power
SUBWOOFERS: 70 W per channel, min. RMS, driven into
6 Ω at 63 Hz with no more than 10% total
harmonic distortion.
MAIN SPEAKERS:30 W per channel, min. RMS, driven into
4 Ω at 1 kHz with no more than 10% total
harmonic distortion.
Audio input sensitivity/Impedance
(at 1 kHz, measured at MAIN SPEAKERS)
AUX: 400 mV/50 kΩ
MIC: 2.5 mV/5 kΩ
Digital output: DIGITAL OUT (OPTICAL)
Signal wave length: 660 nm
Output level: –21 dBm to –15 dBm
Speakers/Impedance: Subwoofer:
6 Ω — 16 Ω
Main speaker: 4 Ω — 8 Ω
Tuner
FM tuning range:
AM tuning range:
At 9 kHz intervals :
87.50 MHz — 108.00 MHz
531 kHz — 1 602 kHz
At 10 kHz intervals : 530 kHz — 1 710 kHz
CD player
CD Capacity:
3 CDs
85 dB
Dynamic range:
Signal-to-noise ratio: 85 dB
Cassette deck
Frequency response
Normal (type I): 50 Hz — 14 000 Hz
Wow and flutter
0.15% (WRMS)
General
Power requirement:
AC 110 V / AC 127 V / AC 220 V /
AC 230 V — AC 240 V (adjustable with
the voltage selector), 50 Hz / 60 Hz
Power consumption: 180 W (at operation)
17 W (on standby)
Dimensions (approx.): 270 mm x 317 mm x 447 mm (W/H/D)
(1011/16 in. x 121/2 in. x 175/8 in.)
Mass (approx.):
8.9 kg (19.6 lbs)
Supplied accessories
See page 6.
Design and specifications are subject to change without notice.
– 30 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, Australia, and
U.K.)
ANTENNA
AM
[
]
FM 75
DIGITAL OUT
OPTICAL]
[
AUX IN
MAIN SPEAKER SUBWOOFER
[4-8 [6-16
]
]
L
L
R
R
VIDEO
OUT
220
VOLTAGE
SETTING
IMPORTANT for mains (AC) line
BEFORE PLUGGING IN, do check that your mains (AC)
line voltage corresponds with the position of the voltage
selector switch provided on the outside of this equipment
and, if different, reset the voltage selector switch, to
prevent from a damage or risk of fire/electric shock.
220
VOLTAGE
SETTING
VICTOR COMPANY OF JAPAN, LIMITED
EN, CH
0501KSMMDWSAM
J
C
V
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Impulse Nail Gun IM200 F18 User Manual
InFocus Projector 410P User Manual
Inglis Home Appliances Microwave Oven IOR14XR User Manual
Insignia Flat Panel Television NS 15LCD User Manual
Intel Personal Computer GA N680SLI DQ6 User Manual
IntraServer Technology Network Card ITI 90 100250 User Manual
JAI Digital Camera Progressive Scan Shutter Cameras User Manual
JVC Digital Camera AX V55BK User Manual
Kenwood Marine Radio TK 2202L User Manual
KitchenAid Food Processor 161 User Manual