JVC Stereo System CA MD70R User Manual

COMPACT COMPONENT MD SYSTEM  
MD-KOMPAKT-KOMPONENTEN-SYSTEM  
SYSTEME MD DE COMPOSANTS COMPACT  
COMPACTO COMPONENT MD-SYSTEEM  
SISTEMAS MD DE COMPONENTES COMPACTOS  
IMPIANTO A COMPONÈNTI COMPATTO MD  
CA-MD70R  
MD  
TITLE  
PLAY  
RDS  
INPUT  
MODE CONTROL  
SLEEP  
MARK  
1
ABC  
2
DEF  
3
EON  
GHI  
PTY SEARCH  
JKL  
DISPLAY  
MNO  
DISPLAY  
/CHARA  
4
5
6
TA/NEWS/INFO  
PQRS  
PTY SELECT  
+
TUV  
WXYZ  
CANCEL  
SET  
7
8
9
10  
0
+
10  
FM MODE SOUND  
BASS  
ENTER  
CD3  
FM/AM TAPE AUX  
MD  
REC PAUSE  
MD  
CD2  
FADE MUTING  
CD  
CD1  
REPEAT  
VOLUME  
COMPACT  
REMOTE CONTROL RM-SEM70RU  
DIGITAL AUDIO  
INSTRUCTIONS  
BEDIENUNGSANLEITUNG  
MANUEL D'INSTRUCTIONS  
GEBRUIKSAANWIJZING  
MANUAL DE INSTRUCCIONES  
ISTRUZIONI  
For Customer Use:  
Enter below the Model No. and Serial  
No. which are located either on the rear,  
bottom or side of the cabinet. Retain this  
information for future reference.  
Model No.  
Serial No.  
LVT0074-002B  
[E]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Location of the Buttons and Controls ........... 3 Playing Back an MD..................................... 23  
Front Panel ............................................................. 4  
Remote Control ...................................................... 5  
Playing Back the Entire MD  
— Continuous Play........................................ 23  
Basic MD Operations........................................... 23  
Programming the Playing Order of the Tracks  
— Program Play ............................................ 24  
Playing at Random — Random Play ................... 26  
Repeating Tracks — Repeat Play ........................ 26  
Getting Started................................................ 6  
Unpacking .............................................................. 6  
Putting the Batteries into the Remote Control ....... 6  
Connecting Antennas ............................................. 6  
Connecting Speakers.............................................. 7  
Connecting Other Equipment ................................ 8  
Recording onto an MD ................................. 27  
Things to Know Before You Start Recording ...... 27  
Recording FM/AM Broadcasts or from the  
Basic Settings ................................................ 10  
Cassette Deck ................................................ 28  
Recording from the External (AUX) Equipment ... 29  
Recording CDs ..................................................... 30  
Setting the Clock.................................................. 10  
Changing the Display Pattern .............................. 10  
Common Operations .................................... 11  
Editing MDs .................................................. 32  
Turning On the Power and Selecting the Sources .. 11  
Adjusting the Volume ........................................... 11  
Reinforcing the Bass Sound ................................. 12  
Selecting the Sound Modes.................................. 12  
Creating Your Own Sound Mode — MANUAL  
Mode .............................................................. 12  
Introducing MD Editing Functions ...................... 32  
DIVIDE Function ................................................ 33  
JOIN Function...................................................... 34  
MOVE Function ................................................... 35  
ERASE Function.................................................. 36  
ALL ERASE Function ......................................... 37  
Erasing a Portion of a Track ................................ 37  
Listening to FM and AM Broadcasts .......... 13  
Tuning in a Station ............................................... 13  
Presetting Stations................................................ 13  
Tuning in a Preset Station .................................... 14  
Assigning Titles to MDs................................ 38  
Assigning a Title Using the Unit.......................... 38  
Assigning a Title Using the Remote Control ....... 41  
Receiving FM Stations with RDS ................ 15  
Using the Timers ........................................... 43  
Changing the RDS Information ........................... 15  
Searching for Programs by PTY Codes (PTY  
Search) ........................................................... 16  
Switching to a Program Type of Your Choice  
Temporarily ................................................... 16  
Using Recording Timer ........................................ 43  
Using Daily Timer ............................................... 44  
Using Sleep Timer ............................................... 46  
Timer Priority....................................................... 46  
Maintenance .................................................. 47  
Playing Back CDs ......................................... 19  
Loading CDs ........................................................ 19  
Playing Back the Entire Discs  
Additional Information ................................ 48  
— Continuous Play........................................ 20  
Basic CD Operations ........................................... 20  
Programming the Playing Order of the Tracks  
— Program Play ............................................ 20  
Playing at Random — Random Play ................... 22  
Repeating Tracks or CDs — Repeat Play ............ 22  
Prohibiting Disc Ejection — Disc Lock .............. 22  
MD Disc Types .................................................... 48  
ATRAC (Adaptive TRansform Acoustic Coding) .. 48  
UTOC (User Table Of Contents) ......................... 48  
Serial Copy Management System (SCMS).......... 48  
Sound Skip Guard Memory ................................. 49  
Troubleshooting ............................................ 50  
MD Messages ...................................................... 51  
Specifications................................................. 52  
Download from Www.Somanuals.c2om. All Manuals Search And Download.  
Location of the Buttons and Controls  
Become familiar with the buttons and controls on your unit.  
Front Panel  
p
Amplifier/  
tuner section  
q
w
1
2
e
r
t
3
4
5
y
6
7
8
u
i
o
9
MD recorder  
section  
d
;
a
s
f
g
k
CD player  
section  
h
j
l
/
z
Display Window  
5
1
2
3
4
– 3 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
See pages in the parentheses for details.  
CD player section  
h Disc number lamps  
• CD 1, CD 2, and CD 3 lamps  
j Disc compartment  
Front Panel  
k CD CONTROL buttons (19)  
Amplifier/tuner section  
• CD 6, REPEAT, 4 / ¢, and 7 buttons  
Pressing CD 6 also turns on the unit.  
l Disc number buttons (20)  
1
button and STANDBY/ON lamp (11)  
2 SOUND button and lamp (12)  
3 ACTIVE BASS EX. (extension) button and lamp (12)  
4 CONTRAST/DISPLAY/CHARA. (character) button  
(10, 24, 38)  
5 TITLE button (38)  
6 MD EDIT button (33)  
7 CLOCK/TIMER button (10, 43)  
8 PLAY MODE button (20, 22, 24, 26)  
9 CURSOR ø / Ø buttons (12, 39)  
p DISPLAY PATTERN buttons (10)  
• 1, 2, 3, DIMMER, and DEMO buttons  
Pressing DEMO also turns on the unit.  
DIRECT TITLE INPUT buttons (39)  
q Display window  
w VOLUME control (11)  
e ENTER button (39)  
r MULTI JOG dial  
t TAPE button (11)  
Pressing this button also turns on the unit.  
y Tuner control buttons (13)  
• FM/AM, + / –, and < / > buttons  
Pressing FM/AM also turns on the unit.  
u AUX button (11, 29)  
• CD 1, CD 2, and CD 3 buttons  
Pressing one of these buttons also turns on the unit.  
/ 0 (open/close) buttons (19)  
0 1, 0 2, and 0 3 buttons  
Pressing one of these buttons also turns on the unit.  
z PHONES jack (11)  
Display window  
1 Main display  
2 MD/CD playback mode indicators  
• PROGRAM, RANDOM, REPEAT mode indicators  
3 Timer mode indicators  
• DAILY (daily timer) and REC (recording timer)  
indicators  
4 Tuner mode indicators  
• STEREO, RDS, EON, and TA/NEWS/INFO  
indicators  
5 Analog clock  
About the indications in the main display  
When operating the unit using the remote control, the indications  
in the main display appear enlarged (without the audio level  
indicator), then become diminished (with the audio level  
indicator). On the other hand, they do not appear enlarged when  
using the buttons on the unit.  
Pressing this button also turns on the unit.  
i SET button  
o CANCEL button  
MD recorder section  
; MD recorder operation lamps  
• MD IN, REC, and DIGITAL lamps  
a 0 (eject) button (23)  
Pressing this button also turns on the unit.  
s MD loading slot  
Ex. When using the remote control  
d SENSOR (remote sensor)  
f MD CONTROL buttons (23)  
• MD 6, REPEAT, 4 / ¢, and 7 buttons  
Pressing MD 6 also turns on the unit.  
g Recording buttons (28 – 31)  
• CD REC, REC PAUSE, 1ST TRACK REC, and  
LISTENING buttons  
The illustrations of the main display used in  
this manual are of those shown by using the  
buttons on the unit.  
Download from Www.Somanuals.c4om. All Manuals Search And Download.  
Continued  
Remote Control  
Remote Control  
1 PLAY MODE button (20, 22, 24, 26)  
2 MD TITLE INPUT button (41)  
3 Number buttons*  
• 1 – 10, +10 buttons (14, 20, 24)  
• Character entry buttons (A – Z) (41)  
ø / Ø buttons (41)  
1
2
w
MD  
PLAY  
RDS  
TITLE  
INPUT  
MODE CONTROL  
e
r
t
• RDS operation buttons (15):  
SLEEP  
MARK  
ABC  
DEF  
EON, PTY SEARCH, DISPLAY, TA/NEWS/  
INFO, PTY SELECT – / + buttons  
4 SOUND button (12)  
1
EON  
2
3
DISPLAY  
PTY SEARCH  
JKL  
DISPLAY  
/CHARA  
GHI  
MNO  
4
5
6
TA/NEWS/INFO  
PQRS  
PTY SELECT  
TUV  
+
3
CANCEL  
SET  
WXYZ  
5 FM MODE button (13)  
7
8
9
y
u
i
o
6 Source selecting buttons (11, 13, 29)  
• FM/AM, TAPE, and AUX buttons  
Pressing one of these buttons also turns on the unit.  
7 MD 6 button (23)  
Pressing this button also turns on the unit.  
8 MD REC PAUSE button (29)  
9 CD 6 button (19)  
Pressing this button also turns on the unit.  
p FADE MUTING button (11)  
q VOLUME + / – button (11)  
w RDS CONTROL button (15)  
+
10  
10  
0
4
5
6
7
8
9
p
FM MODE SOUND  
BASS  
ENTER  
CD3  
FM/AM TAPE AUX  
MD  
REC PAUSE  
MD  
CD  
CD2  
;
a
FADE MUTING  
CD1  
REPEAT  
VOLUME  
q
e
button (11)  
r SLEEP button (46)  
REMOTE CONTROL RM-SEMD70RU  
t DISPLAY/CHARA (character) button (24, 38)  
y CANCEL button  
u SET button  
i BASS button (12)  
o ENTER button (39)  
; Disc number buttons (20)  
• CD 1, CD 2, and CD 3 buttons  
Pressing one of these buttons also turns on the unit.  
a CD/MD/tuner control buttons*  
• REPEAT, 4 / ¢, 7, and @ / # / % / buttons  
* Before using these buttons:  
For tuner operations, press FM/AM on the remote control  
first.  
For CD operations, press one of the disc number buttons  
(CD 1, CD 2, and CD 3) or CD 6 on the remote control  
first.  
For MD operations, press MD 6 on the remote control  
first.  
The number buttons are also used for the following:  
To operate RDS function, press RDS CONTROL on the  
remote control first.  
To enter an MD title, press MD TITLE INPUT on the  
remote control first.  
To operate the unit correctly using the remote  
control  
Make sure that the operation mode for the unit is the same for  
the remote control.  
When using the remote control, point it at the  
remote sensor on the front panel.  
– 5 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Continued  
Unpacking  
Connecting Antennas  
After unpacking, check to be sure that you have all the  
following items.  
FM antenna  
The number in the parentheses indicates the quantity of the  
pieces supplied.  
FM antenna (supplied)  
• AM loop antenna (1)  
• FM antenna (1)  
• Remote control (1)  
• Batteries (2)  
ANTENNA  
FM  
75  
EXT  
AM  
COAXIAL  
AM  
OP  
If any is missing, consult your dealer immediately.  
GND  
LO  
Putting the Batteries into the Remote  
Control  
1 Attach the FM antenna to the FM 75 COAXIAL  
terminal.  
Insert the batteries — R6P(SUM-3)/AA(15F) — into the  
remote control, by matching the polarity (+ and –) on the  
batteries with the + and – markings on the battery  
compartment.  
2 Extend the FM antenna.  
3 Fasten it up in the position which gives you the best  
When the remote control can no longer operate the unit,  
replace both batteries at the same time.  
reception.  
About the supplied FM antenna  
The FM antenna supplied with this unit can be used as temporary  
measure. If reception is poor, you can connect an outside FM  
antenna.  
1
R6P(SUM-3)/AA(15F)  
To connect an outside FM antenna  
Before connecting it, disconnect the supplied FM antenna.  
2
Outside FM antenna  
(not supplied)  
3
ANTENNA  
FM  
75  
AXIA  
EXT  
AM  
L
DO NOT use an old battery together with a new  
one.  
O
C
M
O
A
LO  
ND  
G
P
DO NOT use different types of batteries together.  
DO NOT expose batteries to heat or flame.  
DO NOT leave the batteries in the battery  
compartment when you are not going to use the  
remote control for an extended period of time.  
Otherwise, it will be damaged from battery leakage.  
A 75antenna with coaxial  
type connector (DIN 45325)  
should be used.  
Download from Www.Somanuals.c6om. All Manuals Search And Download.  
Continued  
AM antenna  
Connecting Speakers  
You can connect the speakers using the speaker cords.  
2
3, 4  
Red  
Vinyl-covered wire  
(not supplied)  
Speaker cord  
Speaker cord  
ANTENNA  
RIGHT  
LEFT  
SPEAKERS  
Black  
GND  
AM EXT  
FM  
75  
COAXIAL  
AM  
LOOP  
AM loop antenna (supplied)  
Right speaker  
Left speaker  
1 Twist the core of the cord at the end of  
each cord, then remove the insulation.  
2 Open the speaker terminal.  
1 Connect the AM loop antenna to the AM LOOP  
3 Insert the end of the speaker cord to the terminal.  
Match the polarity of the speaker terminals: Red (+) to  
red (+) and black (–) to black (–).  
terminals as illustrated.  
2 Turn the AM loop antenna until you have the best  
reception.  
4 Close the speaker terminal on the rear of the unit.  
To connect an outside AM antenna  
Use only speakers with the same speaker impedance as  
indicated by the speaker terminals on the rear of the unit.  
When reception is poor, connect a single vinyl-covered  
wire to the AM EXT terminal and extend it horizontally.  
(The AM loop antenna must remain connected.)  
For better reception of both FM and AM  
• Make sure the antenna conductors do not touch any other  
terminals and connecting cords.  
• Keep the antennas away from metallic parts of the unit,  
connecting cords, and the AC power cord.  
– 7 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
To connect audio equipment without a digital output  
terminal  
Connecting Other Equipment  
You can connect the following equipment to this unit:  
• Cassette deck — used as a playback and recording  
device.  
• Audio equipment — used only as an analog playback  
device.  
GND  
AM EXT  
FM  
75  
COAXIAL  
AM  
LOOP  
• Audio equipment with an optical digital output terminal  
— used only as a digital playback device.  
When you connect and use these equipment, refer also to  
the manuals supplied with them.  
LEFT  
RIGHT  
IN (PLAY)  
LEFT  
RIGHT  
LEFT  
Be sure that the plugs of the audio cords and the jacks on  
the rear of the unit are color coded: White plugs and jacks  
are for left audio signals, and red ones for right audio  
signals.  
RIGHT  
OUT (REC)  
DIGITAL IN  
OPTICAL  
RIGHT  
LEFT  
DO NOT connect other equipment while the  
power is on.  
DO NOT plug in any equipment until all  
connections are complete.  
To output  
Audio equipment  
without a digital output  
To connect a cassette deck  
Connect the audio output jacks on the other equipment and  
the AUX jacks, using an audio cord (not supplied).  
GND  
AM EXT  
FM  
75  
COAXIAL  
AM  
LOOP  
LEFT  
RIGHT  
IN (PLAY)  
LEFT  
RIGHT  
LEFT  
RIGHT  
OUT (REC)  
DIGITAL IN  
OPTICAL  
RIGHT  
LEFT  
To input  
Cassette deck  
To output  
By using audio cords (not supplied), connect:  
• Between the audio input jacks on the cassette deck and  
the TAPE OUT (REC) jacks.  
• Between the audio output jacks on the cassette deck and  
the TAPE IN (PLAY) jacks.  
Download from Www.Somanuals.c8om. All Manuals Search And Download.  
Continued  
To connect audio equipment with an optical digital  
output terminal  
NOW, you can plug in the unit and other connected  
equipment FINALLY!  
GND  
AM EXT  
FM  
75  
COAXIAL  
AM  
LOOP  
GND  
AM EXT  
FM  
75  
COAXIAL  
AM  
LOOP  
LEFT  
LEFT  
RIGHT  
RIGHT  
IN (PLAY)  
IN (PLAY)  
LEFT  
LEFT  
RIGHT  
RIGHT  
LEFT  
LEFT  
RIGHT  
OUT (REC)  
RIGHT  
OUT (REC)  
DIGITAL IN  
OPTICAL  
DIGITAL IN  
OPTICAL  
T  
LEFT  
RIGHT  
LEFT  
Protective plug  
To a wall outlet  
When connecting the AC power cord into a wall outlet, the  
unit automatically starts display demonstration.  
Before connecting the other equipment,  
remove the protective plug from the terminal.  
To stop the display demonstration, press any button on  
the unit or the remote control.  
To optical digital output  
Audio equipment with an  
optical digital output  
To audio output  
By using both an optical digital cord (not supplied) and an  
audio cord (not supplied), connect:  
• Between the optical digital output terminal on the other  
equipment and the AUX DIGITAL IN OPTICAL  
terminal.  
• Between the audio output jacks on the other equipment  
and the AUX jacks.  
– 9 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Settings  
Amplifier/Tuner  
DISPLAY PATTERN  
MULTI JOG  
SET  
CANCEL  
CONTRAST  
CLOCK/TIMER  
(DISPLAY/CHARA.)  
Before operating the unit any further, first set the clock  
built in this unit, then some other basic settings.  
Changing the Display Pattern  
To change the display pattern of the audio level  
indicator  
Setting the Clock  
The audio level indicator appears in the main display only  
while playing a source.  
You can set the clock whether the unit is turned on or in  
standby mode.  
Press 1, 2 or 3.  
1 Press CLOCK/TIMER.  
The hour digit in the main display starts  
flashing.  
1: For the following pattern:  
2: For the following pattern:  
2 Rotate MULTI JOG to adjust the hour,  
then press SET.  
3: For erasing the audio level indicator:  
The audio level indicator is not shown, and other  
indications — the disc number or track number,  
playing time — become enlarged in the main display.  
To restore the previous audio level indicator, press  
3 again. (The other indications in the main display are  
diminished.)  
• If you want to correct the hour after  
pressing SET, press CANCEL. The hour  
digit starts flashing again.  
3 Rotate MULTI JOG to adjust the  
minute, then press SET.  
After completing the clock setting...  
To dim the display window  
The analog clock in the display window shows the current time.  
This analog clock advances its long hand twice every 5 minutes.  
(When 3 minutes pass, it advances once. Then 2 minutes pass, it  
advances again.)  
Press DIMMER.  
Each time you press the button, the display window and the  
MULTI JOG dial dim and brighten alternately.  
To start the display demonstration  
Press DEMO.  
• If the unit is in standby mode, the power turns on  
automatically.  
If there is a power failure  
The clock loses the setting and is reset to “0:00.” You need to set  
the clock again.  
To stop the demonstration, press any button. “DEMO  
OFF” appears.  
To adjust the contrast of the display window  
1
Press and hold CONTRAST (DISPLAY/CHARA.)  
for more than 2 seconds.  
The contrast adjustment display appears.  
Rotate MULTI JOG to adjust the contrast.  
2
After completing contrast adjustment...  
Pressing any button restores the previous display.  
Download from Www.Somanuals.1co0m.All Manuals Search And Download.  
Common Operations  
Amplifier/Tuner  
Remote control  
MD  
TITLE  
INPUT  
PLAY  
RDS  
MODE CONTROL  
SOUND  
MULTI JOG  
SLEEP  
MARK  
ABC  
DEF  
STANDBY/ON  
1
EON  
2
3
DISPLAY  
PTY SEARCH  
JKL  
DISPLAY  
/CHARA  
GHI  
MNO  
4
5
6
TA/NEWS/INFO  
PQRS  
PTY SELECT  
+
CANCEL  
SET  
TUV  
WXYZ  
7
8
9
+
10  
10  
0
FM MODE SOUND  
BASS  
ENTER  
CD3  
BASS  
SOUND  
FM/AM TAPE AUX  
MD  
REC PAUSE  
MD  
CD2  
FADE  
CD  
CD1  
FADE MUTING  
MUTING  
REPEAT  
VOLUME  
VOLUME  
+ / –  
CURSOR ø / Ø  
ACTIVE BASS EX.  
SET  
VOLUME  
Here are basic and common things that apply to all the  
functions of the unit.  
Adjusting the Volume  
You can adjust the volume level only while the unit is  
turned on.  
Turning On the Power and Selecting the  
Sources  
Turn VOLUME clockwise to increase the volume or  
counterclockwise to decrease it.  
When you press the play button for a particular source, the  
unit automatically turns on (and starts playing the source).  
When using the remote control, press VOLUME + to  
increase the volume or press VOLUME – to decrease it.  
To select the external equipment as the source, press  
TAPE or AUX so that the unit automatically turns on.  
For private listening  
To turn on the unit without playing, press  
STANDBY/ON lamp lights orange.  
so that the  
Connect a pair of headphones to the PHONES jack. No sound  
comes out of the speakers. Be sure to turn down the volume before  
connecting or putting headphones.  
To turn off the unit (on standby), press  
again so that  
the STANDBY/ON lamp lights red.  
A little power is always consumed even while the unit is in  
standby mode.  
To switch off the power supply completely, unplug the  
AC power cord from the AC outlet.  
The STANDBY/ON lamp goes off.  
PHONES jack  
DO NOT turn off (on standby) the unit with the  
volume set to an extremely high level; otherwise, the  
sudden blast of sound can damage your hearing,  
speakers and/or headphones when you turn on the  
unit or start playing any source.  
When you unplug the AC power cord or if a power  
failure occurs  
The clock is reset to 0:00 right away, while the tuner preset  
stations will be erased in a few days.  
REMEMBER you cannot adjust the volume level  
while the unit is in standby mode.  
To turn down the volume level temporarily  
Press FADE MUTING on the remote control.  
To restore the sound, press the button again.  
– 11 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reinforcing the Bass Sound  
Creating Your Own Sound Mode —  
MANUAL Mode  
The richness and fullness of the bass sound is maintained  
regardless of how low you set the volume.  
You can use this effect only for playback.  
You can create and store your own sound mode only by  
using the buttons and controls on the unit.  
• There is a time limit in doing the following steps. If the  
setting is canceled before you finish, start from step 1  
To get the effect, press ACTIVE BASS EX. (extension) on  
the unit or BASS on the remote control so that the ACTIVE  
BASS EX. lamp lights on the unit.  
1again.  
Press SOUND repeatedly until “MANUAL” appears  
in the main display.  
(In the main display)  
Equalizer pattern  
To cancel the effect, press the button again so that the lamp  
goes off.  
2
3
Press SET.  
Selecting the Sound Modes  
You can select one of the 6 preset sound modes. The sound  
modes can be applied only to playback sounds, and cannot  
be used for recording.  
Adjustable  
frequency range  
To select the sound modes, press SOUND so that the  
SOUND lamp lights on the unit.  
• Each time you press the button, the sound modes change  
as follows:  
Adjust the equalizer pattern.  
1) Press CURSOR ø / Ø to select the frequency  
range to adjust (LOW, MID, HIGH).  
2) Rotate MULTI JOG to adjust the level (–3 to +3)  
of the selected frequency range.  
D.CLUB  
(Dance CLUB)  
OFF  
HALL  
STADIUM  
CLASSIC  
ROCK  
POP  
MANUAL  
(Canceled)  
D.CLUB: Increases resonance and bass.  
HALL: Adds depth and brilliance to the sound.  
STADIUM: Adds clarity and spreads the sound, like in an  
Adjustable frequency range  
outdoor stadium.  
ROCK:  
POP:  
Boosts low and high frequency. Good for  
acoustic music.  
Good for vocal music.  
3) Repeat steps 1) and 2) to adjust the level of the  
other frequency ranges.  
CLASSIC: Good for classical music.  
MANUAL: Your individual mode stored in memory. See  
“Creating Your Own Sound Mode —  
MANUAL Mode.”  
4
Press SET again.  
The equalizer pattern you have created are stored in  
memory.  
OFF:  
Cancels the sound mode.  
To use your own sound mode  
Select MANUAL when using the sound modes. See  
“Selecting the Sound Modes.”  
Download from Www.Somanuals.1co2m.All Manuals Search And Download.  
Listening to FM and AM Broadcasts  
Amplifier/Tuner  
Remote control  
MD  
FM/AM  
TITLE  
INPUT  
PLAY  
RDS  
MULTI JOG  
MODE CONTROL  
SLEEP  
MARK  
ABC  
DEF  
1
2
3
EON  
GHI  
PTY SEARCH  
JKL  
DISPLAY  
MNO  
DISPLAY  
/CHARA  
4
5
6
Number  
buttons  
TA/NEWS/INFO  
PQRS  
PTY SELECT  
TUV  
+
CANCEL  
SET  
WXYZ  
7
8
9
CANCEL  
SET  
+
10  
10  
0
FM MODE SOUND  
BASS  
ENTER  
CD3  
FM MODE  
FM/AM  
FM/AM TAPE AUX  
MD  
REC PAUSE  
MD  
CD2  
CD  
CD1  
FADE MUTING  
REPEAT  
VOLUME  
Tuner control  
Tuner control  
(– / + / < / >)  
CANCEL  
SET  
(% / / @ / #)  
When using the number buttons on the remote control,  
make sure that they are ready for tuner operations.  
• Pressing FM/AM on the remote control makes the  
number buttons ready for tuner operations.  
To change the FM reception mode  
When an FM stereo broadcast is hard to receive or noisy,  
press FM MODE on the remote control so that “MONO”  
appears in the main display. Reception improves.  
To restore the stereo effect, press FM MODE again so  
that “AUTO” appears in the main display.  
In this stereo mode, you can hear stereo sounds when a  
program is broadcast in stereo.  
Tuning in a Station  
1
Press FM/AM.  
The unit automatically turns on and tunes in the  
previously tuned station (either FM or AM).  
• Each time you press the button, the band alternates  
between FM and AM.  
Presetting Stations  
You can preset 30 FM and 15 AM (MW/LW) stations at  
random.  
2
On the unit:  
Press and hold + or – of the tuner control buttons.  
On the remote control:  
In some cases, test frequencies have been already  
memorized for the tuner since the factory examined the  
tuner preset function before shipment. This is not a  
malfunction. You can preset the stations you want into  
memory by following the presetting method.  
• There is a time limit in doing the following steps. If the  
setting is canceled before you finish, start from step 1  
again.  
Press and hold % or of the tuner control buttons.  
The unit starts searching stations and stops when a  
station of sufficient signal strength is tuned in.  
If a program is broadcast in stereo, the STEREO  
indicator also lights.  
To stop during searching, press + / – (or % / ) of the  
tuner control buttons again.  
1 Tune in the station you want to preset.  
• See “Tuning in a Station.”  
When you press + / – (or % / ) briefly and  
repeatedly  
The frequency changes step by step.  
2 Press SET.  
The current preset number starts flashing.  
– 13 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM  
FM  
Tuning in a Preset Station  
3
4
Select a preset number.  
On the unit:  
Rotate MULTI JOG, or press < or > of the tuner  
control buttons.  
On the remote control:  
Press @ or # of the tuner control buttons.  
You can also use the number buttons. (Make sure that  
you have pressed FM/AM on the remote control  
before pressing the Number buttons.)  
For preset number 5, press 5.  
For preset number 15, press +10 then 5.  
For preset number 20, press +10, then 10.  
For preset number 30, press +10, +10, then 10.  
1
Press FM/AM.  
The unit automatically turns on and tunes in the  
previously tuned station (either FM or AM).  
• Each time you press the button, the band alternates  
between FM and AM.  
2
Select a preset number.  
On the unit:  
Rotate MULTI JOG, or press < or > of the tuner  
control buttons.  
On the remote control:  
Press @ or # of the tuner control buttons.  
You can also use the number buttons. (Make sure that  
you have pressed FM/AM on the remote control  
before pressing the Number buttons.)  
For preset number 5, press 5.  
For preset number 15, press +10 then 5.  
For preset number 20, press +10, then 10.  
For preset number 30, press +10, +10, then 10.  
Press SET again.  
The tuned station in step 1 is stored in the preset  
number selected in step 3.  
• Storing a new station on a used number erases the  
previously stored one.  
“MEMORY” does not appear if you  
press SET on the remote control.  
To erase a preset station  
The following procedure is only possible on the unit.  
1
2
Select a preset station number you want to erase.  
Press CANCEL.  
The preset number starts flashing in the main display.  
Press SET.  
“CANCEL” appears in the main display, and the  
station frequency stored in the preset number is erased.  
When you unplug the AC power cord or if a power  
failure occurs  
The preset stations will be erased in a few days. If this happens,  
preset the stations again.  
3
Download from Www.Somanuals.1co4m.All Manuals Search And Download.  
Receiving FM Stations with RDS  
Remote control  
MD  
TITLE  
PLAY  
RDS  
PTY SEARCH  
INPUT  
MODE CONTROL  
RDS CONTROL  
DISPLAY  
SLEEP  
MARK  
ABC  
DEF  
1
EON  
2
3
DISPLAY  
EON  
PTY SEARCH  
JKL  
DISPLAY  
/CHARA  
GHI  
MNO  
4
5
6
TA/NEWS/INFO  
PTY SEARCH +  
TA/NEWS/INFO  
PQRS  
PTY SELECT  
TUV  
+
CANCEL  
SET  
WXYZ  
7
8
9
PTY SEARCH –  
+
10  
10  
0
FM MODE SOUND  
BASS  
ENTER  
CD3  
FM/AM TAPE AUX  
MD  
REC PAUSE  
MD  
CD2  
CD  
CD1  
FADE MUTING  
RDS allows FM stations to send an additional signal along  
with their regular program signals. For example, the  
stations send their station names, as well as information  
about what type of program they broadcast, such as sports  
or music, etc.  
Changing the RDS Information  
You can see RDS information on the display while  
listening to an FM station.  
• RDS operations are possible only using the remote  
1control.  
Press RDS CONTROL.  
When tuned to an FM station which provides the RDS  
service, the RDS indicator lights up on the display.  
2
Press DISPLAY.  
• Each time you press the button, the display changes  
to show the following information:  
With the unit, you can receive the following types of RDS  
signals.  
PS  
PTY  
RT  
(Radio Text)  
PS (Program Service):  
(Program Service) (Program Type)  
Shows commonly known station names.  
All information (PS/PTY/RT)  
PTY (Program Type):  
Shows types of broadcast programs.  
RT (Radio Text):  
If No PS, PTY, or RT signals are sent by a station  
Shows text messages the station sends.  
“NO PS,” “NO PTY” or NO RT” appears in the main display.  
EON (Enhanced Other Networks):  
Provides the information about the types of the  
programs sent by other RDS stations than the one  
being received.  
If the unit takes time to show the RDS information  
received from a station  
WAIT PS”, “WAIT PTY”, or “WAIT RT” may appear on the  
display.  
More about RDS  
• Not all FM stations provide RDS signals, nor do all RDS  
stations provide the same services. If in doubt, check with local  
radio stations for details on RDS in your area.  
• RDS may not work correctly if the received station is not  
transmitting the signals properly or if the signal strength is  
weak.  
– 15 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
Searching for Programs by PTY Codes (PTY  
Search)  
Switching to a Program Type of Your Choice  
Temporarily  
One of the advantages of RDS is that you can locate a  
particular kind of program by specifying the PTY codes.  
• The PTY Search is applicable only to preset stations.  
• There is a time limit in doing the following steps. If the  
setting is canceled before you finish, start from step 1  
again.  
The EON function allows the unit to switch temporarily to  
a broadcast program of your choice (NEWS, TA, and/or  
INFO) from a different station except when you are  
listening to a non-RDS stations – some FM stations and  
AM (MW/LW) stations.  
• The EON indicator lights while receiving a station with  
the EON code.  
To search for a program using the PTY codes, use the  
remote control:  
• EON function is applicable only to preset stations.  
To activate the EON function, use the remote control:  
1
2
Press RDS CONTROL.  
1
2
Press RDS CONTROL.  
Press PTY SEARCH.  
“PTY SELECT” flashes in the main display.  
Press EON.  
The last EON data type selected — TA/NEWS/INFO  
— lights on the display window.  
3
Press PTY SELECT – / + to select a PTY code while  
“PTY SELECT” is flashing.  
Each time you press the button, the PTY codes change  
as follows (refer also to the list on page 18):  
3
Press TA/NEWS/INFO repeatedly until the EON  
data type you want is selected.  
Each time you press the button, the EON data types  
change as follows:  
NEWS AFFAIRS INFO SPORT “  
EDUCATE DRAMA CULTURE “  
TA NEWS INFO = TA = NEWS = INFO =  
TA NEWS = NEWS INFO = TA INFO = (back to  
the beginning)  
SCIENCE VARIED POP M ROCK M “  
M.O.R. M LIGHT M CLASSICS “  
OTHER M WEATHER FINANCE “  
CHILDREN SOCIAL A RELIGION “  
PHONE IN TRAVEL LEISURE JAZZ “  
COUNTRY NATIONAL OLDIES “  
FOLK M DOCUMENT TRAFFIC “  
NONE (back to the beginning)  
TA:  
Traffic announcement  
NEWS: News  
INFO: Program the purpose of which is to impart  
advice in the widest sense.  
To cancel the EON function, press EON again so that the  
TA/NEWS/INFO indicator goes off.  
4
Press PTY SEARCH again.  
While searching, “SEARCH” and the selected PTY  
code alternate on the display.  
The unit searches 30 preset FM stations, stops when it  
finds the one you have selected, and tunes in that  
station.  
• If you cancel the EON function while receiving a  
program selected by the EON function, the unit goes  
back to the previously tuned station.  
Continued  
To continue searching after the first stop:  
Press PTY SEARCH again while the indications on the display are  
flashing.  
If no program is found, “NOT FOUND” appears on the display  
and the unit returns to the last received station.  
To stop searching any time during the process:  
Press PTY SEARCH while searching.  
Download from Www.Somanuals.1co6m.All Manuals Search And Download.  
Continued  
How the EON function actually works:  
More about the EON function  
EON data sent from some stations may not be compatible with  
this unit.  
CASE 1  
If there is no station broadcasting the program you  
have selected  
While listening to a program tuned in by the EON function, the  
station does not change even if another network station starts  
broadcasting a program of the same EON data.  
While listening to a program tuned in by the EON function, you  
can only use the EON and DISPLAY buttons as the tuner  
operation buttons.  
If the stations alternate intermittently between the station tuned  
by the EON function and the currently tuned station  
(“WAITING” flashes in the main display), press EON to cancel  
the EON function.  
If you do not press the button, the currently tuned station is  
received finally, and the indication of the EON data type  
flashing on the display disappears.  
While receiving a station with the EON code (the EON indicator  
lights on the display window), you cannot erase a preset station.  
The unit continues tuning in the current station.  
«
When a station starts broadcasting the program you  
have selected, the unit automatically switches to the  
station. The indicator of received PTY code starts  
flashing.  
«
When the program is over, “EON END” appears in the  
main display, and the unit goes back to the previously  
tuned station, but the EON function still remains  
activated.  
CASE 2  
If there is a station broadcasting the program you  
have selected  
The unit tunes in the program. The indicator of received  
PTY code starts flashing.  
«
When the program is over, “EON END” appears in the  
main display, and the unit goes back to the previously  
tuned station, but the EON function still remains  
activated.  
CASE 3  
If the FM station you are listening to is broadcasting  
the program you have selected  
The unit continues to receive the station but the  
indicator of received PTY code starts flashing.  
«
When the program is over, the indicator of received  
PTY code stops flashing and remains lit, but the EON  
function still remains activated.  
– 17 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the PTY codes:  
NEWS:  
News.  
FINANCE: Stock Market reports, commerce, trading  
etc.  
AFFAIRS:  
Topical program expanding or enlarging  
upon the news — debate, or analysis.  
CHILDREN: Programs targeted at a young audience.  
INFO:  
Program the purpose of which is to impart  
advice in the widest sense.  
SOCIAL A: Programs about sociology, history,  
geography, psychology and society.  
SPORT:  
Program concerned with any aspect of  
sports.  
RELIGION: Religious programs.  
PHONE IN: Involving members of the public expressing  
their views either by phone or at a public  
forum.  
EDUCATE: Educational programs.  
DRAMA: All radio plays and serials.  
TRAVEL:  
LEISURE:  
JAZZ:  
Travel information.  
CULTURE: Programs concerning any aspect of national  
or regional culture, including language,  
theatre, etc.  
Programs about recreational activities.  
Jazz music.  
SCIENCE:  
Programs about natural sciences and  
technology.  
COUNTRY: Songs which originate from, or continue the  
musical tradition of the American Southern  
States.  
VARIED:  
Used for mainly speech-based programs  
like quizzes, panel games and personality  
interviews.  
NATIONAL: Current popular music of the nation or  
region in that country’s language.  
POP M:  
Commercial music of current popular  
appeal.  
OLDIES:  
FOLK M:  
Music from the so-called “golden age” of  
popular music.  
ROCK M:  
M.O.R. M:  
Rock music.  
Music which has its roots in the musical  
culture of a particular nation.  
Current contemporary music considered to  
be “easy-listening.”  
DOCUMENT:Program concerning factual matters,  
LIGHT M:  
Instrumental music, and vocal or choral  
works.  
presented in an investigative style.  
TRAFFIC:  
Traffic announcement.  
Undefined.  
CLASSICS: Performances of major orchestral works,  
NONE:  
symphonies, chamber music, etc.  
OTHER M: Music not fitting into any of the other  
Classification of the PTY codes for some FM  
stations may be different from the above list.  
categories.  
WEATHER: Weather reports and forecasts.  
Download from Www.Somanuals.1co8m.All Manuals Search And Download.  
Playing Back CDs  
Amplifier/tuner  
Remote control  
MD  
TITLE  
INPUT  
PLAY  
RDS  
MODE CONTROL  
PLAY MODE  
SLEEP  
MARK  
ABC  
DEF  
1
2
3
EON  
GHI  
PTY SEARCH  
JKL  
DISPLAY  
MNO  
PLAY MODE  
DISPLAY  
/CHARA  
4
5
6
Number  
buttons  
TA/NEWS/INFO  
PQRS  
PTY SELECT  
TUV  
+
CD player  
CANCEL  
SET  
WXYZ  
7
8
9
CD CONTROL  
(CD 6, 7, 4, ¢)  
Disc number lamp  
(CD 1, CD 2, CD 3)  
+
10  
10  
0
FM MODE SOUND  
BASS  
ENTER  
CD3  
FM/AM TAPE AUX  
MD  
Disc number  
buttons  
REC PAUSE  
MD  
CD2  
(CD 1, CD 2  
CD 3)  
CD  
CD1  
FADE MUTING  
CD 6  
REPEAT  
VOLUME  
CD control  
(7, 4, ¢)  
REMOTE CONTROL RM-SEM70RU  
Open/close buttons  
(0 1, 0 2, 0 3)  
Disc compartment  
Disc number buttons  
(CD 1, CD 2, CD 3)  
When using the remote control, make sure that it is ready  
for CD operations.  
• Pressing CD 1, CD 2, CD 3, or CD 6 on the remote  
control makes the remote control ready for CD  
operations.  
3
4
Press the same open/close button (0 1 to 0 3) you  
have pressed in step 1.  
The disc compartment closes, and the corresponding  
disc number lamp (CD 1 to CD 3) lights.  
Repeat steps 1 to 3 to place other CDs.  
Loading CDs  
When loading more than one CD continuously  
Press the open/close button (0 1 to 0 3) for the next tray you  
want to place a CD onto, the disc compartment automatically  
closes and then opens with the next tray on the top.  
1
Press one of the open/close buttons (0 1 to 0 3) for  
the disc tray (CD 1 to 3) you want to load a CD onto.  
The unit automatically turns on and  
the disc compartment comes out  
About the disc number lamps (CD 1 to CD 3)  
Each disc number lamp corresponds to the disc tray of the same  
number.  
with the specified disc tray on the  
top.  
It lights orange when the unit has recognized that there is a CD  
on the corresponding disc tray.  
It lights green when a CD on the corresponding disc tray is  
selected as the current disc or played back.  
2
Place a disc correctly on the circle of the disc tray,  
with its label side up.  
Good  
No good  
• When using a CD single (8 cm), place it on the  
inner circle of the disc tray.  
– 19 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
To locate a particular point in a track  
Playing Back the Entire Discs — Continuous  
Play  
During play, press and hold 4 or ¢ of the CD control.  
4 : Fast reverses the disc.  
¢ : Fast forwards the disc.  
You can play CDs continuously.  
To go to another track  
1
2
Load CDs.  
Press 4 or ¢ of the CD control repeatedly before or  
during playback.  
4 :Goes back to the beginning of the current or  
previous tracks.  
¢ :Skips to the beginning of the next or succeeding  
tracks.  
Press one of the disc number buttons (CD 1, CD 2  
and CD 3) for the disc you want to play.  
CD playback starts from the first track of the selected  
disc.  
Rotating MULTI JOG on the unit also changes the tracks.  
Disc No.  
Track No.  
Elapsed playing time  
To go to another track directly using the number  
buttons  
• Pressing CD 6 instead of the disc number buttons  
starts playing back the CD whose disc number lamp  
lights green.  
Pressing the number button(s) allows you to start playing  
the track number you want. (Make sure that you have  
pressed one of the following buttons — disc number  
buttons (CD 1, CD 2, CD 3) and CD 6 — on the remote  
control before using the number buttons.)  
Ex.: For track number 5, press 5.  
To stop during play, press 7 of the CD control.  
To remove the disc, press the corresponding open/close  
buttons (0 1 to 0 3).  
For track number 15, press +10 then 5.  
For track number 20, press +10, then 10.  
For track number 32, press +10 , +10, +10, then 2.  
CD playback sequence  
When 3 CDs are loaded in the disc compartment, they are played  
in one of the following sequences.  
When CD 1 is pressed : CD 1 ] CD 2 ] CD 3 (then stops)  
When CD 2 is pressed : CD 2 ] CD 3 ] CD 1 (then stops)  
When CD 3 is pressed : CD 3 ] CD 1 ] CD 2 (then stops)  
Programming the Playing Order of the  
Tracks — Program Play  
* When only 2 CDs are loaded, they are played in the same order,  
but the disc tray without a CD is skipped.  
You can arrange the order in which the tracks play before  
you start playing. You can program up to 32 tracks.  
Basic CD Operations  
1
Load discs.  
• If the current playing source is not the CD player,  
press CD 6, then 7 of the CD control before going  
to the next step.  
While playing a CD, you can do the following operations.  
To exchange CDs during playback of another  
Press the open/close button (0 1 to 0 3) corresponding to a  
disc number whose disc number lamp is lit orange to eject  
that disc tray and exchange the CD.  
When CDs are exchanged during playback, playback stops  
after playing the last exchanged CD.  
2
Press PLAY MODE so that “PROGRAM” appears  
in the main display.  
• Each time you press the button, play mode changes  
as follows:  
PROGRAM  
RANDOM  
Canceled  
(Continuous play)  
To stop playback for a moment  
Press CD 6.  
To resume play, press CD 6 again.  
Step No.  
Disc No.  
Track No.  
Continued  
Download from Www.Somanuals.2co0m.All Manuals Search And Download.  
Continued  
Amplifier/tuner  
Remote control  
MD  
TITLE  
INPUT  
PLAY  
RDS  
MODE CONTROL  
PLAY MODE  
SLEEP  
MARK  
ABC  
DEF  
CANCEL  
SET  
1
EON  
2
3
DISPLAY  
PTY SEARCH  
JKL  
DISPLAY  
/CHARA  
MULTI JOG  
PLAY MODE  
GHI  
MNO  
4
5
6
Number  
buttons  
TA/NEWS/INFO  
PQRS  
PTY SELECT  
TUV  
+
CD player  
CANCEL  
SET  
WXYZ  
7
8
9
CANCEL  
SET  
CD CONTROL  
Disc number lamp  
(CD 1, CD 2, CD 3)  
(CD 6, 7, 4, ¢, REPEAT)  
+
10  
10  
0
FM MODE SOUND  
BASS  
ENTER  
CD3  
FM/AM TAPE AUX  
MD  
Disc number  
buttons  
REC PAUSE  
MD  
CD2  
(CD 1, CD 2,  
CD 3)  
CD  
CD1  
FADE MUTING  
CD 6  
REPEAT  
CD control  
(7, 4, ¢,  
REPEAT)  
VOLUME  
REMOTE CONTROL RM-SEM70RU  
Open/Close buttons  
(0 1, 0 2, 0 3)  
Disc compartment  
Disc number buttons  
(CD 1, CD 2, CD 3)  
Continued  
6
Press CD 6.  
The tracks are played in the order you have programed.  
3
Press one of the disc number buttons (CD 1, CD 2,  
and CD 3) to select the disc number you want to  
play.  
To stop during play, press 7 of the CD control.  
To exit from program play mode, press PLAY MODE  
once or twice so that the unit enters another playback mode  
(Random play or Continuous play mode).  
Ex. Disc No. 2 is selected  
To check the program contents  
4
Select the track from the CD selected in the above  
step.  
On the unit:  
Rotate MULTI JOG to select the track number,  
then press SET.  
On the remote control:  
Before playing, you can check the program contents by  
pressing 4 or ¢ of the CD control.  
¢ :Shows the programed tracks in the programed  
order.  
4 :Shows them in the reverse order.  
Press the number buttons.  
• For how to use the number buttons, see “To go to  
another track directly using the number buttons” on  
page 20.  
To modify the program  
Before playing, you can erase the last programed track by  
pressing CANCEL.  
Each time you press the button, the last programed track is  
erased from the program.  
To add tracks in the program before you start play, simply  
select track numbers you want to add.  
Ex. Track No. 8 is selected  
5
Program other tracks you want.  
• To program tracks from the same disc, repeat step 4.  
• To program tracks from a different disc, repeat steps  
3 and 4.  
– 21 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeating Tracks or CDs — Repeat Play  
If you try to program a 33rd step  
“PROGRAM FULL” will appear in the main display.  
You can have all the CDs, the program or the individual  
track currently playing repeat as many times as you like.  
If your entry is ignored  
You have tried to program a track from an empty tray,  
or a track number that does not exist on the CD (for example,  
selecting track 14 on a CD that only has 12 tracks). Such entries  
are ignored.  
To repeat play, press REPEAT during or before playing.  
Each time you press the button, Repeat play mode changes  
as follows, and appears in the main display:  
REPEAT ALL  
REPEAT 1CD  
REPEAT 1  
Canceled  
(Continuous play)  
Playing at Random — Random Play  
The tracks of all loaded CDs will play at random.  
REPEAT ALL: Repeats all the tracks on all the CDs  
(continuously or at random), or all the  
tracks in the program.  
REPEAT 1CD*: Repeats all the tracks on one CD.  
1
Prepare discs.  
• If the current playing source is not the CD player,  
press CD 6, then 7 of the CD control before going  
to the next step.  
REPEAT 1:  
Repeats one track on one CD.  
*
REPEAT 1CD is not used for Program play and  
Random Play.  
2
Press PLAY MODE repeatedly until “RANDOM”  
appears in the main display.  
• Each time you press the button, play mode changes  
as follows:  
To cancel Repeat play, press REPEAT repeatedly until no  
REPEAT indication (REPEAT ALL, REPEAT 1CD, or  
REPEAT 1) lights on the display window.  
• REPEAT 1CD is also canceled when you press PLAY  
MODE to change the play mode.  
PROGRAM  
RANDOM  
Canceled  
(Continuous play)  
Prohibiting Disc Ejection — Disc Lock  
You can prohibit CD and MD ejection from the unit and  
can lock discs.  
• This operation is only possible using the unit.  
3
Press CD 6.  
The tracks are played at random.  
Random play ends when all the tracks are played once.  
• Random play also ends when the disc compartment is  
opened.  
To prohibit disc ejection, press 0 1 while holding 7 of  
the CD control with the unit set in standby mode.  
“LOCKED” appears for a while, and the loaded discs (both  
CDs and MD) are locked.  
To stop during play, press 7 of the CD control.  
To exit from Random play mode, press PLAY MODE  
once or twice so that the unit enters another playback mode  
(Continuous play or Program play mode).  
If you try to eject the locked discs  
“LOCKED” appears to inform you that the Disc Lock is in use.  
To cancel the prohibition and unlock the discs, press 0 1  
again while holding 7 of the CD control with the unit set in  
standby mode.  
“UNLOCKED” appears for a while, and the loaded discs  
(both CDs and MD) are unlocked.  
Download from Www.Somanuals.2co2m.All Manuals Search And Download.  
Playing Back an MD  
Amplifier/tuner  
Remote control  
MD  
TITLE  
INPUT  
PLAY  
POWER  
SLEEP  
MODE  
PLAY MODE  
MARK  
ABC  
DEF  
1
2
3
DISPLAY  
/CHARA  
GHI  
JKL  
MNO  
4
5
6
Number  
buttons  
CANCEL  
SET  
PQRS  
TUV  
WXYZ  
DISPLAY/CHARA.  
(CONTRAST)  
PLAY MODE  
7
8
9
+
10  
10  
0
FM MODE SOUND  
BASS  
ENTER  
CD3  
FM/AM TAPE AUX  
MD  
MD recorder  
MD CONTROL  
(MD 6, 7, 4, ¢)  
REC PAUSE  
MD  
CD2  
MD 6  
MD IN lamp  
CD  
CD1  
FADE MUTING  
REPEAT  
MD control  
VOLUME  
(7, 4, ¢)  
REMOTE CONTROL RM-SEM70U  
US and foreign patents licensed from  
Dolby Laboratories Licensing Corporation.  
MD loading slot  
0
When using the remote control, make sure that it is ready  
for MD operations.  
• Pressing MD 6 on the remote control makes the  
remote control ready for MD operations.  
2
Press MD 6.  
MD playback starts from the first track.  
Track No.  
Elapsed playing time  
Playing Back the Entire MD — Continuous  
Play  
To stop during play, press 7 of the MD control.  
To remove the disc, press 0.  
You can play an MD continuously.  
1
Insert an MD into the MD loading slot.  
The MD is pulled in automatically.  
If the MD or track has a title  
The MD IN lamp lights.  
The title will be shown at the lower portion of the main display. (If  
a title is long and cannot be shown at a time, the unit scrolls the  
title to show the entire title.)  
Insert an MD in the same way  
as indicated on the MD.  
Basic MD Operations  
While playing an MD, you can do the following  
operations.  
Total Track No. Total Playing time  
(After a few seconds)  
To stop playback for a moment  
Press MD 6.  
To resume play, press MD 6 again.  
Current Track No.  
Playing time of the  
current track  
– 23 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
To locate a particular point in a track  
During play, press and hold 4 or ¢ of the MD control.  
4 : Fast reverses the disc.  
Programming the Playing Order of the  
Tracks — Program Play  
¢ : Fast forwards the disc.  
You can arrange the order in which the tracks play before  
you start playing. You can program up to 32 tracks.  
To go to another track  
Press 4 or ¢ of the MD control repeatedly before or  
during playback.  
4 :Goes back to the beginning of the current or  
previous tracks.  
1
Insert an MD.  
• If the current playing source is not the MD recorder,  
press MD 6, then 7 of the MD control before  
going to the next step.  
¢ :Skips to the beginning of the next or succeeding  
tracks.  
2
Press PLAY MODE so that “PROGRAM” appears  
in the main display.  
Rotating MULTI JOG on the unit also changes the tracks.  
• Each time you press the button, play mode changes  
as follows:  
To go to another track directly using the number  
buttons  
PROGRAM  
RANDOM  
Pressing the number button(s) allows you to start playing  
the track number you want. (Make sure that you have  
pressed MD 6 on the remote control before using the  
Number buttons.)  
Canceled  
(Continuous play)  
Ex.: For track number 5, press 5.  
For track number 15, press +10 then 5.  
For track number 20, press +10, then 10.  
For track number 32, press +10 , +10, +10, then 2.  
Track No.  
To change the display Indications  
Step No.  
The main display can show 4 track titles at a time.  
Each time you press DISPLAY/CHARA. (CONTRAST),  
the indications in the main display changes as follows:  
3
Select the track.  
On the unit:  
Rotate MULTI JOG to select the track number,  
then press SET.  
On the remote control:  
Normal  
indication mode  
Press the number buttons.  
• For how to use the number buttons, see “To go to  
another track directly using the number buttons.”  
4 track title  
indication mode  
Ex. Track No. 5 is selected  
If the selected track has a title, it will be shown at the lower  
portion of the main display. (If the title is long and cannot  
be shown at a time, the unit scrolls the title to show the  
entire title)  
If a track title cannot be shown at a time while in 4  
track title indication mode  
Continued  
The unit scrolls the title. However, if it consists of more than 32  
characters, the entire title cannot be shown.  
If you change the tracks quickly while in 4 track  
title indication mode  
The unit cannot catch up with the changing speed and, therefore,  
cannot show the track titles correctly.  
Download from Www.Somanuals.2co4m.All Manuals Search And Download.  
Continued  
Amplifier/tuner  
Remote control  
MD  
TITLE  
INPUT  
PLAY  
RDS  
MODE CONTROL  
PLAY MODE  
SLEEP  
MARK  
ABC  
DEF  
1
2
3
EON  
GHI  
PTY SEARCH  
JKL  
DISPLAY  
MNO  
DISPLAY  
/CHARA  
4
5
6
CANCEL  
SET MULTI JOG  
Number  
buttons  
TA/NEWS/INFO  
PQRS  
PTY SELECT  
TUV  
+
CANCEL  
SET  
WXYZ  
PLAY MODE  
7
8
9
CANCEL  
SET  
+
10  
0
10  
MD recorder  
FM MODE SOUND  
BASS  
ENTER  
CD3  
MD CONTROL  
(MD 6, 7, 4, ¢, REPEAT)  
MD IN lamp  
FM/AM TAPE AUX  
MD  
REC PAUSE  
MD  
CD2  
MD 6  
CD  
CD1  
FADE MUTING  
REPEAT  
MD control  
(7, 4, ¢,  
REPEAT)  
VOLUME  
REMOTE CONTROL RM-SEM70RU  
MD loading slot  
0
Continued  
If you try to program a 33rd step  
“PROGRAM FULL” will appear on the display.  
4
5
Repeat step 3 to program other tracks you want.  
Press MD 6.  
The tracks are played in the order you have programed.  
If your entry is ignored  
You have tried to program a track that does not exist on the MD  
(for example, selecting track 14 on an MD that only has 12 tracks).  
Such entries are ignored.  
To stop during play, press 7 of the MD control.  
To exit from Program play mode, press PLAY MODE  
once or twice so that the unit enters another playback mode  
(Random play or Continuous play mode).  
To check the program contents  
Before playing, you can check the program contents by  
pressing 4 or ¢ of the MD control.  
¢ :Shows the programmed tracks in the programmed  
order.  
4 :Shows them in the reverse order.  
To modify the program  
Before playing, you can erase the last programed track by  
pressing CANCEL.  
Each time you press the button, the last programed track is  
erased from the program.  
To add tracks in the program before you start play, simply  
select track numbers you want to add.  
– 25 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeating Tracks — Repeat Play  
Playing at Random — Random Play  
You can have all the tracks, the program or the individual  
track currently playing repeat as many times as you like.  
The tracks of the loaded MD will play at random.  
1
Insert an MD.  
To repeat play, press REPEAT during or before playing.  
Each time you press the button, Repeat play mode changes  
as follows, and appears in the main display:  
• If the current playing source is not the MD recorder,  
press MD 6, then 7 of the MD control before  
going to the next step.  
REPEAT ALL  
REPEAT 1  
2
Press PLAY MODE repeatedly until “RANDOM”  
appears in the main display.  
• Each time you press the button, play mode changes  
as follows:  
Canceled  
(Continuous play)  
REPEAT ALL: Repeats all the tracks in the MD  
(continuously or at random), or all the  
tracks in the program.  
PROGRAM  
RANDOM  
Canceled  
(Continuous play)  
REPEAT 1:  
Repeats one track.  
To cancel Repeat play, press REPEAT repeatedly until no  
REPEAT indication (REPEAT ALL or REPEAT 1) lights  
on the display window.  
3
Press MD 6.  
The tracks are played at random.  
Random play ends when all the tracks are played once.  
• Random play also ends when the MD is ejected.  
To prohibit disc ejection — Disc Lock  
You can prohibit CD and MD ejection from the unit,  
and can lock discs.  
To stop during play, press 7 of the MD control.  
To exit from Random play mode, press PLAY MODE  
once or twice so that the unit enters another playback mode  
(Continuous play or Program play mode).  
See page 22 for details.  
Download from Www.Somanuals.2co6m.All Manuals Search And Download.  
Recording onto an MD  
Things to Know Before You Start Recording  
It may be unlawful to record or play back copyrighted material without the consent of the  
copyright owner.  
• When you record onto partially recorded MD, its contents are not erased or overwritten. The recording starts from  
the point following the last recorded track of the MD.  
If you want to record on such an MD from the beginning, you have to erase its contents first (see “ALL ERASE  
Function” on page 37).  
• The recording level is automatically set correctly, so it is not affected by the VOLUME control. Thus, during  
recording you can adjust the sound you are actually listening to without affecting the recording level.  
• While recording, you can hear sound modes and/or the active bass extension effect through the speakers or  
headphones. However, the sound is recorded without these effects (see page 12).  
To avoid erasing important recordings  
About the track marks  
Recordable MDs have an erasure prevention tab so that  
When playing an MD, you can move among the tracks  
important recordings are not accidentally erased. When you  
using MULTI JOG or 4 / ¢ of the MD control, or  
finish recording or editing, slide open the erasure  
even select directly a track using the remote control.  
prevention tab on the cartridge side surface. New recording  
You can do this because there is a mark recorded at the  
or editing is now no longer possible.  
front of each track enabling you to locate the track. This  
To do re-recording or editing, return the tab to the closed  
mark is called a “track mark” and the portion between  
position.  
two adjacent track marks is called a “track.”  
When recording from a digital source such as the  
CD player, a track mark is recorded automatically at  
the beginning of each track.  
When recording from an analog source such as  
FM/AM broadcasts, no track mark is recorded on  
the MD. This means that, when playing this MD, the  
Erasure prevention tab  
MD recorder will regard the entire recording as one  
track (track 1). You will not be able to select directly  
a song or navigate through songs.  
However, if there is a blank of 3 seconds or more, the  
MD recorder will consider it as a blank separating 2  
tracks and consequently put a track mark.  
Recording/Editing  
possible  
Disc protected:  
Recording/Editing  
not possible  
To put a track mark manually while recording an  
analog source, press SET at the place you want to put a  
track mark.  
To add a track mark after recording is over, you can  
use the DIVIDE function (see page 33).  
– 27 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
Amplifier/tuner  
Remote control  
MD  
TITLE  
INPUT  
PLAY  
RDS  
MODE CONTROL  
SLEEP  
MARK  
ABC  
DEF  
1
2
3
EON  
GHI  
PTY SEARCH  
JKL  
DISPLAY  
MNO  
DISPLAY  
/CHARA  
4
5
6
TAPE  
TA/NEWS/INFO  
PQRS  
PTY SELECT  
TUV  
+
FM/AM  
CANCEL  
SET  
WXYZ  
7
8
9
MD recorder  
+
10  
0
10  
MD CONTROL  
FM MODE SOUND  
BASS  
ENTER  
CD3  
MD IN lamp  
REC lamp  
(MD 6)  
0
FM/AM TAPE AUX  
MD  
TAPE  
MD 6  
FM/AM  
REC PAUSE  
MD  
CD2  
MD REC  
PAUSE  
CD  
CD1  
FADE MUTING  
REPEAT  
VOLUME  
MD control  
(7)  
REMOTE CONTROL RM-SEM70RU  
REC PAUSE  
MD CONTROL (7)  
MD loading slot  
When using the remote control, make sure that it is ready  
for MD operations.  
Ex.: When recording an FM station  
• Pressing MD 6 on the remote control makes the  
remote control ready for MD operations.  
Remaining time  
for recording  
Recording FM/AM Broadcasts or from the  
Cassette Deck  
4
Press MD 6.  
The REC lamp stops flashing and remains lit, and  
recording starts.  
You can record FM/AM broadcasts or sounds from the  
cassette deck connected to the TAPE jacks on the rear.  
To stop recording, press 7 of the MD control.  
1
2
Insert a recordable MD.  
The MD IN lamp lights.  
To stop recording temporarily, press REC PAUSE (or  
MD REC PAUSE) again.  
To resume recording, press MD 6 again.  
Start playing the source — FM, AM, or cassette  
deck connected to the TAPE jacks.  
• When recording an FM/AM broadcast, press FM/  
AM, then tune into a station you want.  
To remove the MD, press 0.  
• When recording from the cassette deck, press TAPE  
to select it as the playback source.  
3
Press REC PAUSE on the unit (or MD REC PAUSE  
on the remote control).  
The REC lamp on the unit starts flashing.  
Download from Www.Somanuals.2co8m.All Manuals Search And Download.  
Continued  
Amplifier/tuner  
Remote control  
MD  
TITLE  
INPUT  
PLAY  
RDS  
MODE CONTROL  
SLEEP  
MARK  
ABC  
DEF  
1
2
3
EON  
GHI  
PTY SEARCH  
JKL  
DISPLAY  
MNO  
DISPLAY  
/CHARA  
4
5
6
TA/NEWS/INFO  
PQRS  
PTY SELECT  
+
CANCEL  
SET  
TUV  
WXYZ  
AUX  
7
8
9
MD recorder  
+
10  
10  
0
FM MODE SOUND  
BASS  
ENTER  
CD3  
MD CONTROL  
MD IN lamp  
REC lamp  
(MD 6)  
DIGITAL lamp  
FM/AM TAPE AUX  
MD  
AUX  
0
REC PAUSE  
MD  
CD2  
MD REC  
PAUSE  
MD 6  
CD  
CD1  
FADE MUTING  
REPEAT  
VOLUME  
MD control  
(7)  
REMOTE CONTROL RM-SEM70RU  
CD REC  
1ST TRACK REC  
REC PAUSE  
MD loading slot  
MD CONTROL (7)  
Recording from the External (AUX)  
Equipment  
Both analog and digital recording is possible from the  
external equipment connected to the AUX jacks.  
For digital recording: Connect;  
• Between the optical digital output terminal on the  
other equipment and the AUX DIGITAL IN  
OPTICAL terminal, by using an optical digital cord  
(not supplied).  
If you select the digital input, the DIGITAL lamp on the  
unit lights.  
• Between the audio output jacks on the other  
equipment and the AUX jacks, by using an audio  
cord (not supplied).  
DIGITAL: Enables digital recording through the  
optical digital cord connected to the AUX  
DIGITAL IN OPTICAL terminal.  
A sampling rate converter built in this unit  
allows you to record from a digital device  
whose sampling frequency is 32 kHz,  
44.1 kHz, or 48 kHz.  
1
Insert a recordable MD.  
The MD IN lamp lights.  
2
3
Press AUX once, then start playing the source.  
ANALOG: Enables analog recording through the  
audio cord connected to the AUX jacks.  
Press REC PAUSE on the unit (or MD REC PAUSE  
on the remote control).  
The REC lamp on the unit starts flashing.  
5
Press MD 6.  
The REC lamp stops flashing and remains lit, and  
recording starts.  
4
Press AUX again.  
• Each time you press the button, analog or digital  
input is selected alternately.  
– 29 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
To stop recording, press 7 of the MD control.  
To record a single track while playing a CD  
Press CD REC while playing back a CD track you want to  
record.  
The playback of that CD track is stopped, and the same  
track starts playing from the beginning again. This time, the  
MD recorder starts recording the CD track.  
To stop recording temporarily, press REC PAUSE (or  
MD REC PAUSE) again.  
To resume recording, press MD 6 again.  
To remove the MD, press 0.  
First Track Recording  
Recording CDs  
First Track Recording allows you to record the first track of  
each loaded CD. You can, for example, make a directory of  
all your best CDs.  
You have 3 methods to record from a CD onto an MD.  
• Synchronized Recording — Records the entire CD or  
the program you have made.  
1
2
Prepare CDs, and a recordable MD.  
• Always place a CD on the CD 1 tray. If not, this  
function does not work.  
• First Track Recording — Records the first track of  
each CD.  
• Listening Edit Recording — Allows you to make a  
program while listening to the CD.  
Press 1ST TRACK REC.  
The REC and DIGITAL lamps light, and First Track  
Recording starts from the CD on the CD 1 tray.  
Synchronized Recording  
This is the easiest way of CD recording. Only by pressing  
CD REC, you can start playing a CD and recording on an  
MD.  
1
2
Insert a recordable MD.  
The MD IN lamp lights.  
Prepare a CD.  
• Place a CD on one of the disc tray (CD 1, CD 2, or  
CD 3), press the corresponding Disc Number button  
(CD 1, CD 2, or CD 3), then 7 of the CD control  
before going to the next step. Make sure that the  
correct Disc Number lamp lights on the unit.  
You can make a program if you want (see page 20).  
When the first track of the CD on the CD 1 tray is  
recorded, the first track of the CD on the CD 2 tray will  
be recorded. Recording continues until the first track of  
each loaded CD is recorded.  
3
Press CD REC on the unit.  
The REC and DIGITAL lamps on the unit light.  
3
Replace the CDs on the trays whose disc number  
lamp does not light green.  
You can change CDs to continue the First Track  
Recording using more than 3 CDs.  
When the first track of the last loaded CD is recorded, First  
Track Recording stops.  
To stop recording, press 7 (of either the CD control or the  
MD control).  
To stop recording, press 7 (of either the CD control or the  
MD control).  
Download from Www.Somanuals.3co0m.All Manuals Search And Download.  
Continued  
MD recorder  
Amplifier/tuner  
MD IN lamp  
REC lamp  
DIGITAL lamp  
CD REC  
MD loading slot  
LISTENING  
MD CONTROL (7)  
MULTI JOG  
Listening Edit Recording  
If you do not either press the button or rotate MULTI  
JOG, the unit will play the same track repeatedly.  
Listening Edit Recording allows you to make a program  
while listening and checking each track of the loaded CDs,  
then to start recording the program.  
4
Repeat step 3 to program other tracks.  
You can program up to 32 tracks.  
When you finish checking all CDs or if there is no more  
remaining time for recording on the MD, Listening Edit  
Recording starts automatically.  
1
2
Prepare CDs, and a recordable MD.  
• Always place a CD on the CD 1 tray. If not, this  
function does not work.  
The REC and DIGITAL lamps light.  
Press LISTENING.  
Listening Edit starts from the CD on the CD 1 tray.  
To stop any time during editing process and start  
recording, press CD REC.  
To stop recording, press 7 (of either the CD control or the  
MD control).  
To erase the program, press 7 of the CD control while  
checking the contents of the loaded CDs.  
To modify the program  
Before you start recording (or move to the next disc  
programming), you can go back to a previous track of the  
currently programming disc by pressing 4 of the CD  
control (programmed tracks, up to the track you have  
returned to, are erased from the program).  
Start programming from that track again.  
• By rotating MULTI JOG downward, you can also go  
back to a previous track of the currently programming  
disc.  
Remaining time  
for recording  
3
Decide if you want to include the current track in  
the program or skip it.  
To include the current playing track in the  
program, press LISTENING again.  
The current track is programed (“Memory” appears  
for a while) and the next track starts playing. (If the  
last track of a CD is programed, the first track of the  
next CD starts playing.)  
To skip the current track, rotate MULTI JOG  
downward or press ¢ of the CD control.  
The current playing track is not programed and the  
next track starts playing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
– 31 –  
Editing MDs  
Continued  
Introducing MD Editing Functions  
A recorded MD can be edited in many ways. The MD editing functions include dividing, joining, moving, erasing a single  
track, erasing the entire disc, and more than one of them can be combined as required.  
Dividing a track (DIVIDE) : Page 33  
Erasing all tracks (ALL ERASE) : Page 37  
This function divides a track by adding a track marking(s)  
This function erases data in a disc entirely.  
in the desired point(s) in the middle or where you want to  
search later.  
2nd  
1st  
3rd  
4th  
5th  
2nd  
1st  
3rd  
4th  
C
D
E
B
A
Track No.  
A
B
C
D
E
After  
All Erase  
Track No.  
After track B  
division  
2nd  
1st  
3rd  
4th  
5th  
B
C
D
E
A
Combining MD editing functions  
By combining “DIVIDE”, “ERASE” and “JOIN”, for  
example, it is possible to erase only a part of an existing  
Joining a track (JOIN) : Page 34  
This function joins two adjacent tracks into a single track  
by deleting a track marking.  
track.  
Part to be erased  
2nd  
1st  
3rd  
4th  
5th  
1st  
2nd  
4th  
4th  
3rd  
C
D
E
B
A
Track No.  
B
B
C
C
C
A
After track B  
joining  
Track No.  
Dividing track A  
into 3 tracks  
2nd  
1st  
3rd  
4th  
A
B
C
D
E
2nd  
1st  
3rd  
5th  
A
A
A
C
a
c
b
Track No.  
Track No.  
Moving a track (MOVE) : Page 35  
This function moves a track by reordering the track  
numbers.  
Erasing track  
b
3rd  
1st  
2nd  
A
A
2nd  
1st  
3rd  
4th  
5th  
B
a
c
C
D
E
B
A
Joining  
Track No.  
tracks  
and  
a
c
After track B  
movement  
2nd  
3rd  
1st  
2nd  
1st  
3rd  
4th  
5th  
A
A
B
C
D
E
B
A
a
c
Erasing a track (ERASE) : Page 36  
This function erases a specified track. After the erasure,  
the subsequent tracks are justified and their track numbers  
are decremented automatically.  
You can also assign titles to MDs and/or tracks  
(See page 38.)  
A title can be assigned to a track or disc. Once a title is assigned,  
it is displayed in later playback for confirmation.  
Each title can be composed of up to 64 characters, and can be  
input using alphabetic characters (uppercase and lowercase),  
symbols and numerals.  
2nd  
1st  
3rd  
4th  
5th  
C
D
E
B
A
Track No.  
After track B  
erasure  
2nd  
1st  
3rd  
4th  
C
D
E
A
Download from Www.Somanuals.3co2m.All Manuals Search And Download.  
Continued  
Amplifier/tuner  
MD EDIT  
SET  
MULTI JOG  
ENTER  
CANCEL  
MD recorder  
MD IN lamp  
0
MD Loading slot  
• If you have selected a wrong track, press CANCEL  
then select the correct track.  
DIVIDE Function  
This function allows you to divide one track into two  
separate tracks. It is useful, for example, when you want to  
add track marks at a certain point within a track or if you  
want to separate a recording.  
• To do the following procedures, use the buttons and  
controls on the unit.  
5
6
Press SET when you find the point where you want  
to divide the track.  
The MD recorder repeats the selected point — a  
portion of 3 seconds length following the dividing  
point.  
• To stop any time during editing process, press MD EDIT.  
1
2
Insert an MD you want to edit into the MD loading  
slot.  
The MD IN lamp lights.  
Press MD EDIT.  
The MD recorder enters editing mode (with DIVIDE  
function selected).  
• If the dividing point is satisfactory, go to step 7.  
• If the dividing point is not satisfactory, go to the next  
step  
Rotate MULTI JOG to precisely adjust the dividing  
point.  
You can shift the dividing point up to ±128. This  
range (±128) corresponds to approximately ±8  
seconds from the original point (Position 0).  
3
4
Press SET.  
The information of the first track (or the current track,  
if during play) of the MD appears in the main display,  
and playback starts.  
Rotate MULTI JOG to select the track you want to  
divide.  
When you stop rotating the MULTI JOG dial, the unit  
repeats the newly selected dividing point.  
Ex. When you want to divide track 3  
• When you find the right position, go to the next step.  
– 33 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
4
5
Press SET.  
7
Press SET.  
Rotate MULTI JOG to select the two adjacent  
tracks you want to join.  
Ex.: When joining tracks 1 and 2  
• If you want to cancel the editing, press CANCEL.  
8
9
Press ENTER to finish the editing procedures.  
6
Press SET.  
Press 0 to eject the MD.  
“WRITING” appears while the editing you have made  
is being recorded on the MD.  
• If you have selected wrong tracks, press CANCEL,  
then select the correct tracks by rotating MULTI  
JOG.  
To join the divided tracks again, see the JOIN function.  
• If you want to cancel the editing, press CANCEL.  
JOIN Function  
7
8
Press ENTER to finish the editing procedures.  
This function allows you to join two adjacent tracks into  
one track.  
• To do the following procedures, use the buttons and  
controls on the unit.  
• To stop any time during editing process, press MD EDIT.  
1
2
Insert an MD you want to edit into the MD loading  
slot.  
The MD IN lamp lights.  
Press 0 to eject the MD.  
“WRITING” appears while the editing you have made  
is being recorded on the MD.  
Press MD EDIT.  
The MD recorder enters editing mode (with DIVIDE  
function selected).  
To divide the joined tracks, see the DIVIDE function.  
3
Rotate MULTI JOG until “JOIN” is selected.  
Download from Www.Somanuals.3co4m.All Manuals Search And Download.  
Continued  
Amplifier/tuner  
MD EDIT  
SET  
MULTI JOG  
ENTER  
CANCEL  
MD recorder  
MD IN lamp  
0
MD Loading slot  
MOVE Function  
5
6
Rotate MULTI JOG to select the track you want to  
move.  
This function allows you to move a track to the position  
you prefer. It is useful to change the order of the tracks as  
you like.  
• To do the following procedures, use the buttons and  
controls on the unit.  
Ex.: When moving track 2  
• To stop any time during editing process, press MD EDIT.  
1
2
Insert an MD you want to edit into the MD loading  
slot.  
The MD IN lamp lights.  
Press SET.  
Press MD EDIT.  
The MD recorder enters editing mode (with DIVIDE  
function selected).  
• If you have selected a wrong track number, press  
CANCEL, then select the correct track number again.  
7
Rotate MULTI JOG to select the position where you  
want to move the track.  
Ex.: When moving to the track 4 position  
3
4
Rotate MULTI JOG until “MOVE” is selected.  
Press SET.  
– 35 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
3
4
Rotate MULTI JOG until “ERASE” is selected.  
8
9
Press SET.  
Press SET.  
• If you have selected wrong tracks, press CANCEL,  
then select the correct tracks by rotating MULTI  
JOG.  
• If you want to cancel the editing, press CANCEL.  
Press ENTER to finish the editing procedures.  
5
6
Rotate MULTI JOG to select the track you want to  
erase.  
Press SET.  
10  
Press 0 to eject the MD.  
“WRITING” appears while the editing you have  
made is being recorded on the MD.  
• If you have selected a wrong track number, press  
CANCEL, then select the correct track number.  
ERASE Function  
7
8
Repeat steps 5 and 6 if you want to erase more  
tracks (up to 16).  
This function allows you to erase an unwanted track.  
• To do the following procedures, use the buttons and  
controls on the unit.  
Press ENTER to finish your selection of tracks to  
erase.  
• To stop any time during editing process, press MD EDIT.  
1
2
Insert an MD you want to edit into the MD loading  
slot.  
The MD IN lamp lights.  
• If you want to cancel the editing, press CANCEL.  
9
Press ENTER again.  
Press MD EDIT.  
The MD recorder enters editing mode (with DIVIDE  
function selected).  
10  
Press 0 to eject the MD.  
“WRITING” appears while the editing you have  
made is being recorded on the MD.  
Download from Www.Somanuals.3co6m.All Manuals Search And Download.  
Continued  
Amplifier/tuner  
MD EDIT  
SET  
MULTI JOG  
ENTER  
CANCEL  
MD recorder  
MD IN lamp  
0
MD Loading slot  
ALL ERASE Function  
6
Press 0 to eject the MD.  
“WRITING” appears while the editing you have made  
is being recorded on the MD.  
This function allows you to erase all the tracks on an MD.  
• To do the following procedures, use the buttons and  
controls on the unit.  
• To stop any time during editing process, press MD EDIT.  
Erasing a Portion of a Track  
1
2
3
Insert an MD you want to edit into the MD loading  
slot.  
The MD IN lamp lights.  
You can erase just a portion of one track by using the  
DIVIDE, ERASE and JOIN functions.  
• To do the following procedures, use the buttons and  
controls on the unit.  
Press MD EDIT.  
The MD recorder enters editing mode (with DIVIDE  
function selected).  
• To stop any time during editing process, press MD EDIT.  
1
2
3
Insert an MD you want to edit into the MD loading  
slot.  
The MD IN lamp lights.  
Rotate MULTI JOG until “ALL ERASE” is  
selected.  
Press MD EDIT.  
The MD recorder enters editing mode (with DIVIDE  
function selected).  
Divide a track into 3 portions to isolate the portion  
to erase.  
• Use the DIVIDE function by referring to page 33.  
4
5
Press SET.  
4
5
Erase the middle portion.  
• Use the ERASE function by referring to page 36.  
• If you want to cancel the editing, press CANCEL.  
Join the two remaining portions.  
• Use the JOIN function by referring to page 34.  
Press ENTER.  
– 37 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assigning Titles to MDs  
Continued  
Amplifier/tuner  
MULTI  
JOG  
DISPLAY/CHARA. DIRECT TITLE INPUT  
(CONTRAST) (DISPLAY PATTERN)  
ENTER  
MD recorder  
MD IN lamp  
MD Loading slot  
SET  
CANCEL  
TITLE ø CURSOR Ø  
You can assign a name to each MD and to each track.  
Once a title is assigned, it is displayed in later playback for  
confirmation.  
3
Rotate MULTI JOG to change the title entry mode.  
• Title entry mode changes as follows:  
Each title can be composed of up to 64 characters, and can  
be input using alphabetic characters (uppercase and  
lowercase), symbols and numerals.  
2nd track  
title  
1st track  
title  
Disc  
title  
Last track  
title  
3rd track  
title  
Assigning a Title Using the Unit  
• To stop any time during the process, press TITLE.  
1
2
Insert an MD you want to edit into the MD loading  
slot.  
The MD IN lamp lights.  
Ex.: When selecting 3rd track title entry mode  
Press TITLE.  
The MD recorder enters title entry mode.  
4
5
Press SET to enter the selected title entry mode.  
Disc title entry indication (mode): appears when  
you press TITLE while the disc information is shown  
in the main display.  
Character entry position  
Press DISPLAY/CHARA. (CONTRAST) to select  
the character set you want.  
• Each time you press the button, the character sets  
change as follows:  
Track title entry indication (mode): appears when  
you press TITLE while the track information is  
shown in the main display.  
Capital letters  
& Symbols  
Small letters  
& Symbols  
Numerals  
& Symbols  
See the character set table on page 40 to know what  
characters and symbols you can use.  
Continued  
Download from Www.Somanuals.3co8m.All Manuals Search And Download.  
Continued  
Amplifier/tuner  
MULTI  
JOG  
DISPLAY/CHARA. DIRECT TITLE INPUT  
(CONTRAST)  
(DISPLAY PATTERN)  
ENTER  
MD recorder  
MD IN lamp  
MD Loading slot  
0
SET  
CANCEL  
TITLE ø CURSOR Ø  
Continued  
• To move the character entry position while entering a  
title, press ø CURSOR Ø.  
• If you have entered an incorrect character, press  
CANCEL to cancel the last entry.  
6
Input a character.  
• EX. When entering “H”  
1) Rotate MULTI JOG to select the row where a  
character you want exists.  
7
Repeat steps 5 and 6 to input other characters.  
• The main display can only show 7 characters at a  
time. If you enter the 8th character, the first character  
disappears, and so on.  
• In this example, select the row of “F G H I J.”  
8
9
Press ENTER twice to finish title entry.  
Select the row  
• If you want to cancel the editing, press TITLE after  
pressing ENTER once in this step.  
2) Press one of the DIRECT TITLE INPUT  
buttons to select the character position in the  
row.  
Press 0 to eject the MD.  
“WRITING” appears while the editing you have made  
is being recorded on the MD.  
The selected character is input, and the character  
entry position moves to the next.  
• In this example, press 3 which corresponds to  
“H” in the row of “F G H I J.”  
You can assign titles during play or recording  
During play: Entering a track title  
The MD recorder repeats playback of the current  
track until you press ENTER twice in step 8  
above. When you press it twice, MD stops play.  
Entering a disc title  
The MD recorder repeats playback of all tracks  
of the MD until you press ENTER twice in step 8  
above. When you press it twice, MD stops play.  
During recording:Entering a track title  
The MD recorder continues recording even after  
you press ENTER twice in step 8 above. When  
you press it twice, a track title is assigned to the  
track where you have started the title entry.  
– 39 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
Changing the Title  
5
6
Repeat steps 2 to 4 of the current procedure to  
correct more characters.  
You can make a correction or change the title.  
1
2
Follow steps 1 to 4 of page 38.  
Press ENTER twice to finish correcting the title.  
• If you want to cancel the correction, press TITLE  
after pressing ENTER once in this step.  
Press ø CURSOR Ø to select the character you  
want to correct.  
• Make sure that the character you want to change is  
flashing.  
7
Press 0 to eject the MD.  
“WRITING” appears while the editing you have made  
is being recorded on the MD.  
3
4
Press CANCEL to delete the character you have  
selected in the above step.  
To erase all the characters  
Press CANCEL repeatedly in step 3 above to erase all the  
characters, then go to step 6.  
Input the correct character.  
1) Press DISPLAY/CHARA. (CONTRAST) to select  
the character set you want.  
2) Rotate MULTI JOG then press one of the DIRECT  
TITLE INPUT buttons.  
Available Characters  
Capital letters & Symbols  
Small letters & Symbols  
Numerals & Symbols  
(Blank)  
(Blank)  
(Blank)  
(Blank)  
(Blank)  
Download from Www.Somanuals.4co0m.All Manuals Search And Download.  
Continued  
Remote control  
MD  
TITLE  
INPUT  
PLAY  
RDS  
MD recorder  
MODE CONTROL  
MD TITLE  
INPUT  
SLEEP  
MARK  
ABC  
DEF  
1
2
3
EON  
GHI  
PTY SEARCH  
JKL  
DISPLAY  
MNO  
DISPLAY  
/CHARA  
4
5
6
DISPLAY/CHARA  
CANCEL  
SET  
Character  
entry buttons  
TA/NEWS/INFO  
PQRS  
PTY SELECT  
TUV  
+
CANCEL  
SET  
WXYZ  
7
8
9
+
10  
10  
0
FM MODE SOUND  
BASS  
ENTER  
CD3  
ø / Ø  
ENTER  
FM/AM TAPE AUX  
MD  
REC PAUSE  
MD  
CD2  
MD IN lamp  
MD Loading slot  
0
CD  
CD1  
FADE MUTING  
Assigning a Title Using the Remote Control  
4
Press SET to enter the selected title entry mode.  
• To stop any time during the following process, press MD  
TITLE INPUT.  
1
2
Insert an MD you want to edit into the MD loading  
slot on the unit.  
The MD IN lamp lights.  
Press MD TITLE INPUT.  
The MD recorder enters title entry mode.  
5
6
Press DISPLAY/CHARA. to select the character set  
you want.  
• Each time you press the button, the character sets  
change as follows:  
Disc title entry indication (mode): appears when  
you press MD TITLE INPUT while the disc  
information is shown in the main display.  
Capital letters  
Small letters  
Numerals  
Input a character.  
1) Press the character entry button for a character  
you want to input.  
Track title entry indication (mode): appears when  
you press MD TITLE INPUT while the track  
information is shown in the main display.  
Examples:  
• To input an “A” or “a,” press ABC once.  
To input a “B” or “b,” press ABC twice.  
To input a “C” or “c,” press ABC three times.  
To input a “D” or “d,” press DEF once.  
To input an “E” or “e,” press DEF twice.  
To input an “F” or “f,” press DEF three times.  
............  
• To input a symbol, press MARK repeatedly until  
the desired mark appears.  
3
Press ø or Ø to change the title entry mode.  
• Title entry mode changes as follows:  
2nd track  
title  
1st track  
title  
Disc  
title  
• To move the character entry position while  
entering a title, press ø or Ø.  
• If you have entered an incorrect character, press  
CANCEL to cancel the last entry.  
Last track  
title  
3rd track  
title  
– 41 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Name!!  
2) Press the button for the next character you want  
to input.  
Changing the Title  
You can make a correction or change the title.  
• If the next character you want to input is assigned  
to the same button you have just pressed in step  
6-1), press Ø first to move the character entry  
position to right.  
1
2
Follow steps 1 to 4 of page 41.  
Press ø or Ø to select the character you want to  
correct.  
7
Repeat steps 5 and 6 to input other characters.  
• The main display can only show 8 characters at a  
time. If you enter the 9th character, the first character  
disappears, and so on.  
• Make sure that the character you want to change is  
flashing.  
3
4
5
6
Press CANCEL to delete the character you have  
selected in the above step.  
8
9
Press ENTER twice to finish the title entry.  
Input the correct character by pressing one of the  
text entry buttons.  
• If you want to cancel the editing, press MD TITLE  
INPUT after pressing ENTER once in this step.  
Repeat steps 2 to 4 of the current procedure to  
correct more characters.  
Press 0 on the unit to eject the MD.  
“WRITING” appears while the editing you have made  
is being recorded on the MD.  
Press ENTER twice to finish correcting the title.  
• If you want to cancel the correction, press MD TITLE  
INPUT after pressing ENTER once in this step.  
You can assign titles during play or recording  
During play: Entering a track title  
The MD recorder repeats playback of the current  
7
Press 0 on the unit to eject the MD.  
“WRITING” appears while the editing you have made  
is being recorded on the MD.  
track until you press ENTER twice in step 8  
above. When you press it twice, MD stops play.  
Entering a disc title  
The MD recorder repeats playback of all tracks  
of the MD until you press ENTER twice in step 8  
above. When you press it twice, MD stops play.  
To erase all the characters  
Press CANCEL repeatedly in step 3 above to erase all the  
characters, then go to step 6.  
During recording: Entering a track title  
The MD recorder continues recording even after  
you press ENTER twice in step 8 above. When  
you press it twice, a track title is assigned to the  
track where you have started the title entry.  
Available Characters  
Capital letters  
Small letters  
Symbols  
Numerals  
(Blank)  
Download from Www.Somanuals.4co2m.All Manuals Search And Download.  
Using the Timers  
Amplifier/tuner  
CANCEL  
SET  
MULTI JOG  
CLOCK/TIMER  
There are three timers available — Recording Timer, Daily  
Timer, and Sleep Timer.  
Before using these timers, you need to set the clock built in  
the unit. (See page 10.)  
Using Recording Timer  
With Recording Timer, you can make an MD of a radio  
broadcast automatically.  
You can set Recording Timer whether the unit is turned  
on or off.  
• To correct a mis-entry any time during the setting  
process, press CANCEL.  
2
3
4
5
Rotate MULTI JOG to set the hour of the timer-on  
time, then press SET.  
Rotate MULTI JOG to set the minute of the timer-  
on time, then press SET.  
How Recording Timer actually works  
Rotate MULTI JOG to set the hour of the timer-off  
time, then press SET.  
The unit automatically turns on, tunes into the specified  
station, turns off the volume, and starts recording on the  
MD recorder when the timer-on time comes. Then, when  
the timer-off time comes, the unit automatically turns off  
(stands by).  
Rotate MULTI JOG to set the minute of the timer-  
off time, then press SET.  
The timer settings remain stored in memory until you reset  
them or disconnect the AC power cord.  
1
Press CLOCK/TIMER repeatedly until “REC SET”  
appears in the main display.  
• Each time you press the button, the timer mode  
changes as follows:  
6
Rotate MULTI JOG to select either “FM” or “AM,”  
then press SET.  
DAILY ON/OFF?  
DAILY SET  
Clock  
REC ON/OFF?  
REC SET  
Previous indication  
– 43 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
Using Daily Timer  
7
Rotate MULTI JOG to select a preset channel, then  
press SET.  
With Daily Timer, you can wake up to your favorite music  
or radio program.  
You can set Daily Timer whether the unit is turned on or  
off.  
How Daily Timer actually works  
The unit automatically turns on, and starts playing the  
specified source when the timer-on time comes. Then,  
when the timer-off time comes, the unit automatically turns  
off (stands by).  
After completing the settings...  
The REC indicator lights on the display window, and Recording  
Timer is ready for unattended recording.  
The timer settings remain stored in memory until you reset  
them or disconnect the AC power cord.  
After a timer recording is complete...  
Set the volume to an appropriate listening level.  
1
Press CLOCK/TIMER repeatedly until “DAILY  
SET” appears in the main display.  
• Each time you press the button, the timer mode  
changes as follows:  
If you press a certain button while Recording Timer  
is operating  
Recording will stop.  
DAILY ON/OFF?  
DAILY SET  
Clock  
REC ON/OFF?  
REC SET  
Previous indication  
To use the same Recording timer settings repeatedly  
Once you have set Recording Timer, it remains stored in  
memory until you change it.  
To activate Recording Timer with the previous settings  
recalled, follow the procedure below:  
1
Press CLOCK/TIMER repeatedly until “REC ON/  
OFF?” appears in the main display.  
2
3
4
5
Rotate MULTI JOG to set the hour of the timer-on  
time, then press SET.  
2
Press SET to use the previous settings for next timer  
recording.  
The REC indicator lights on the display window.  
Rotate MULTI JOG to set the minute of the timer-  
on time, then press SET.  
• To deactivate Recording Timer, press CANCEL in  
this step.  
Rotate MULTI JOG to set the hour of the timer-off  
time, then press SET.  
Rotate MULTI JOG to set the minute of the timer-  
off time, then press SET.  
Continued  
Download from Www.Somanuals.4co4m.All Manuals Search And Download.  
Continued  
Amplifier/tuner  
Remote control  
MD  
TITLE  
PLAY  
RDS  
INPUT  
MODE CONTROL  
SLEEP  
MARK  
ABC  
DEF  
1
EON  
2
3
DISPLAY  
SLEEP  
PTY SEARCH  
JKL  
DISPLAY  
/CHARA  
GHI  
MNO  
4
5
6
TA/NEWS/INFO  
PQRS  
PTY SELECT  
+
CANCEL  
SET  
TUV  
WXYZ  
7
8
9
+
10  
10  
0
FM MODE SOUND  
BASS  
ENTER  
CD3  
FM/AM TAPE AUX  
MD  
CANCEL  
SET  
MULTI JOG  
CLOCK/TIMER  
REC PAUSE  
MD  
CD2  
Continued  
8
9
Rotate MULTI JOG to set the volume level, then  
press SET.  
You can adjust the volume within the range of “00”  
to “50.” If you select “– –,” the volume is set to the  
previous level when the unit is turned off.  
6
Rotate MULTI JOG to set the source, then press  
SET.  
FM  
AM  
CD  
MD  
AUX  
TAPE  
FM:  
AM:  
CD:  
MD:  
Tunes into a preset FM station. Go to step 7.  
Tunes into a preset AM station. Go to step 7.  
Plays a CD. Prepare a CD, then go to step 7.  
Plays an MD. Prepare an MD.  
TAPE*: Selects TAPE” as the source. Make the  
cassette deck ready for playback.  
AUX*: Selects “AUX” as the source. Make the  
external equipment ready for playback.  
Rotate MULTI JOG to select either “FADE” or  
“NO FADE,” then press SET.  
* To use these equipment with the Daily Timer, they  
also have the timer function.  
FADE:  
Volume fades in (gradually becomes  
louder and is set to the specified level)  
when the timer-on time comes.  
7
If you have selected FM or AM as the source in the  
above step, select a preset channel.  
1) Rotate MULTI JOG to select a preset channel.  
2) Press SET.  
NO FADE: No fade-in effect. Volume is set to the  
specified level when the timer-on time  
comes.  
If you have selected CD as the source in the above  
step, select a disc.  
1) Rotate MULTI JOG to select a disc.  
2) Press SET.  
After completing the settings...  
The DAILY indicator lights on the display window.  
Turns off the unit (on standby) if you have set Daily Timer with the  
unit turned on.  
If you press a certain button while Daily Timer is  
operating  
The unit will not turn off automatically.  
Ex.: When selecting “CD 2”  
– 45 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To use the same Recording timer settings repeatedly  
Once you have set Daily Timer, it remains stored in  
memory until you change it.  
To activate Daily Timer with the previous settings recalled,  
follow the procedure below:  
Timer Priority  
Since each timer can be set separately, you may wonder  
what happens if the setting for these timers overlaps.  
Here are the priorities for each timer.  
1
Press CLOCK/TIMER repeatedly until “DAILY  
ON/OFF?” appears in the main display.  
• Recording Timer has priority over Daily Timer and  
Sleep Timer.  
If Daily Timer is set to come on while Recording Timer  
is operating, Daily Timer will not come on at all.  
6:00  
6:30  
7:00  
7:30  
Recording Timer  
Daily Timer  
2
Press SET to activate Daily timer.  
• To deactivate Daily Timer, press CANCEL in this  
step.  
does not work.  
If Recording Timer is set to come on while Sleep Timer  
is operating, Sleep Timer will be canceled several  
seconds before Recording Timer comes on.  
Using Sleep Timer  
With Sleep Timer, you can fall asleep to your favorite  
music.  
6:00  
7:30  
6:30  
7:00  
You can set Sleep Timer when the unit is turned on.  
Recording Timer  
Sleep Timer  
How Sleep Timer actually works  
The unit automatically turns off after the specified time  
length passes.  
canceled.  
• Sleep Timer has priority over Daily Timer.  
If Daily Timer is set to come on while Sleep Timer is  
operating, Daily Timer will not come on at all.  
1
Press SLEEP on the remote control.  
• Each time you press the button, the time length  
changes as follows:  
6:00  
7:30  
6:30  
7:00  
10  
20  
30  
60  
90  
120  
Sleep Timer  
Daily Timer  
OFF  
(Canceled)  
does not work.  
2
Wait for about 3 seconds after specifying the time  
length.  
The display window dims.  
Therefore, the equation is like this —  
Recording Timer > Sleep Timer > Daily Timer  
To check the remaining time until the shut-off time,  
press SLEEP once. The remaining time until the shut-off  
time appears for about 5 seconds.  
To change the shut-off time, press SLEEP repeatedly until  
the desired time length appears.  
To cancel the setting, press SLEEP repeatedly until  
“SLEEP OFF” appears.  
• Turning off the unit also cancels Sleep Timer  
Download from Www.Somanuals.4co6m.All Manuals Search And Download.  
Maintenance  
To get the best performance of the unit, keep your discs and mechanism clean.  
Handling MDs  
General Notes  
In general, you will have the best performance by keeping  
your CDs, MDs and the mechanism clean.  
• Do not open the shutter.  
- The shutter is locked so that it  
will not open. Trying to force it  
open will break the MD. If the  
shutter opens accidentally, close  
it again quickly without  
Store CDs and MDs in their cases, and keep them in  
cabinets or on shelves.  
Keep the CD disc compartment, and the MD loading  
slot cover closed when not in use.  
touching the MD inside.  
• Do not place MDs in the follow-  
ing places:  
Handling CDs  
- High temperature areas such as  
in direct sunlight or inside a  
car.  
- High humidity areas, e.g. in a  
bathroom.  
• Remove the CD from its case by  
holding it at the edge while  
pressing the center hole lightly.  
• Do not touch the shiny surface of  
the disc, or bend the CD.  
- On a beach or sandy area.  
• Put the CD back in its case after  
use to prevent warping.  
• Clean MDs regularly.  
- If dust or dirt gets on cartridge, wipe it off with a soft  
dry cloth.  
• Be careful not to scratch the  
surface of the CD when placing it  
back in its case.  
• Avoid exposure to direct sunlight,  
temperature extremes, and  
moisture.  
To clean the CD  
Wipe the CD with a soft cloth in a  
straight line from center to edge.  
DO NOT use any solvent — such as conventional  
record cleaner, spray, thinner, or benzine — to clean  
the CD.  
– 47 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
MD Disc Types  
There are two types of MDs: Premastered (prerecorded) and Recordable (blank).  
Premastered MDs  
Premastered MDs, which have been recorded at music studio, can be played back like regular CDs. On an MD of this type,  
data is recorded as the presence or absence of tiny pits. A laser beam focuses on the pits on the surface of the MD and  
reflects the detection back to the lens in the MD recorder. The MD recorder then decodes the signals and plays them back as  
music. This type of MD is called an “optical disc.”  
Recordable MDs  
Recordable MDs, which use magneto-optical technology, can be recorded and played back repeatedly. The laser inside the  
MD recorder applies heat to the MD, demagnetizing the magnetic layer of the MD for recording and playback. This type of  
MD is called an “magnetic-optical disc.”  
ATRAC (Adaptive TRansform Acoustic Coding)  
The MD provides 74 minutes recording and playback time, the same as an audio CD, but in a diameter of only 64 mm. This  
ability to store such a large amount of data is the result of ATRAC, an audio compression technique developed for MD. This  
technology cuts out faint sounds that would not be heard by the human beings. This technology, based on human sensitivity  
to sounds, reduces recorded data volume up to about one-fifth of that of the original data.  
UTOC (User Table Of Contents)  
Found only on recordable MDs, this area contains sub-data (track number, recording data, etc.) which can be rewritten by  
the user.  
UTOC enables us to search tracks quickly and edit tracks on the MD.  
3:12  
4:15  
6:05  
Serial Copy Management System (SCMS)  
The MD recorder integrated to this unit uses the Serial Copy Management System which allows only first-generation digital  
copies to be made of premastered software (like CDs or prerecorded MDs).  
1st Generation  
2nd Generation  
OK  
NO  
ABCDEFG  
Download from Www.Somanuals.4co8m.All Manuals Search And Download.  
Sound Skip Guard Memory  
The biggest weakness of discs is their susceptibility to vibration. The “Sound Skip Guard Memory” has been developed to  
cope with this weakness.  
With this function, a few seconds of signals read by the optical read head from the disc are first stored in memory before  
being reproduced as audio signals. Thus, even when vibration or shock interrupts signals being read, these stored signals  
can continue to reproduce sounds for the few seconds. Thus, the user will enjoy uninterrupted music.  
When “vibrated”....  
Normally....  
MD limitations  
The MD records data in an original format that differs from that of conventional cassette tapes or DATs. Since there are  
some limitations with this recording format, the following types of symptoms may occur. These symptoms are not  
malfunctions.  
Cause  
Symptoms  
There is a maximum number of tracks which can be  
recorded, regardless of recording time. More than 254  
tracks cannot be recorded on an MD.  
“DISC FULL” appears, even though there is still enough  
remaining time on an MD.  
• Repeating erasure and recording on the same MD creates  
many blank portions sparsely on the MD. When record-  
ing on such an MD, a track is recorded on these blank  
portions sparsely. If a track is divided and recorded into  
so many portions, “DISC FULL” appears.  
“DISC FULL” appears even though the number of tracks  
and recording time do not reach the limit.  
The JOIN function sometimes does not work.  
• If a divided portion of less than 8 seconds is made while  
a track is recorded on the MD, that track cannot be  
joined to another track using the JOIN function. Further-  
more, if that track is erased, the remaining time of the  
MD may not increase exactly by the erased amount.  
• If a track has been divided into many portions while  
being recorded on the MD, sounds will drop out while  
fast forwarding or reversing such an MD.  
The remaining time on the MD does not increase even  
when tracks are erased.  
The sound drops out during fast forward or fast rewind.  
You cannot record on a blank portion of less than 2 seconds  
in the MD. For this reason, the actual recording time of  
discs may become shorter.  
The amount of recorded time on the MD added to the  
amount of remaining time is shorter than the MD’s total  
possible recording time.  
– 49 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If you are having a problem with your unit, check this list for a possible solution before calling for service.  
If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person,  
such as your dealer, for service.  
Symptom  
No sound is heard.  
Possible Cause  
Action  
Connections are incorrect, or loose.  
Check all connections and make  
corrections. (See pages 6 – 9.)  
Unable to record on an MD.  
Poor radio reception.  
You are using a prerecorded MD.  
The MD is write-protected.  
Change it with a recordable MD.  
Unprotect the MD. (See page 51.)  
Reconnect the antenna securely.  
The antenna is not connected  
correctly.  
The AM loop antenna is too close  
to the unit.  
Change the position and direction of  
the AM loop antenna.  
The FM antenna is not properly  
extended and positioned.  
Extend FM antenna to the best  
reception position.  
The CD skips.  
The CD is dirty or scratched.  
Clean or replace the CD. (See page 47.)  
• Remove the obstruction.  
Unable to operate the remote control.  
The path between the remote  
control and the remote sensor on  
the unit is blocked.  
The batteries have lost their charge. • Replace the batteries.  
Match them correctly.  
The number buttons and CD/MD/tuner The operation modes for the unit and  
control buttons on the remote control  
do not function correctly.  
for the remote control do not match.  
Loaded CDs and MD cannot be  
ejected.  
The main AC power cord is not  
plugged in.  
Plug in the AC power plug.  
The Disc Lock function is turned  
on.  
Turn off the Disc Lock function.  
(See page 22.)  
The CD does not play.  
Operations are disabled.  
The CD is upside down.  
Put the CD in with the label side up.  
Unplug the unit then plug it back in.  
The built-in microprocessor has  
malfunctioned due to external electrical  
interference.  
Download from Www.Somanuals.5co0m.All Manuals Search And Download.  
?
?
?
MD Messages  
Message  
Signification  
The disc is blank.  
Solution  
BLANK DISC  
Change the MD with another if you  
want to enjoy playback.  
CANNOT JOIN  
You are trying to join tracks which  
cannot be joined.  
This is not a malfunction. (See MD  
limitations on page 49.)  
DISC ERROR  
DISC FULL  
There is a problem with this MD.  
Change the MD.  
There is no more space on the MD or  
there are over 254 tracks.  
Use another recordable MD or erase  
some tracks.  
EMERGENCY STOP  
MD NO DISC  
A malfunction has occurred during the Eject the MD and re-insert it.  
recording.  
There is no MD.  
Put an MD.  
NON-AUDIO  
CANNOT COPY  
You are trying to copy a non-audio disc Stop recording.  
like a CD-ROM or a Video CD.  
PLAYBACK MD  
You are trying to edit or record on a  
playback-only MD.  
Use a recordable MD.  
DISC PROTECTED  
The MD is write-protected.  
Unprotect the MD or use another. (See  
page 27.)  
SCMS CANNOT  
COPY  
Digital copy of the 2nd generation is  
prohibited.  
Use an analog recording method.  
DIGITAL IN  
UNLOCK  
There is no digital device connected to Connect a digital device using digital  
the AUX DIGITAL IN OPTICAL  
terminal.  
optical cord.  
– 51 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
Amplifier  
Power requirement:  
AC 230 V , 50 Hz  
Output Power (IEC 268-3/DIN)  
37 watts per channel, min. RMS, both channels driven into  
6 ohms at 1 kHz with no more than 0.9% total harmonic  
distortion.  
Power consumption: 105 watts (at operation)  
11 watts (on standby: with Demo  
off)  
15 watts (on standby: with Demo  
on)  
Audio input sensitivity/Impedance (at 1 kHz)  
Analog input:  
Dimensions (approx.): 245 x 280 x 346 mm (W/H/D)  
(911/16 x 111/16 x 135/8 in.)  
Mass (approx.):  
TAPE  
AUX  
200 mV/47 kohms  
500 mV/47 kohms  
7.8 kg (17.2 lbs)  
Digital input:  
AUX:  
Optical  
Supplied accessories  
Signal wave length: 660 nm  
Input level: –23 dBm to –15 dBm  
(With the built-in sampling rate  
converter, corresponding to 32 kHz/  
44.1 kHz/48 kHz)  
See page 6.  
Design and specifications are subject to change without  
notice.  
Audio output level/Impedance (at 1 kHz)  
TAPE 170 mV/3.9 kohms  
Speakers/Impedance: 6 ohms  
Tuner  
FM tuning range: 87.50 – 108.00 MHz  
AM tuning range: MW: 522 – 1,629 kHz  
LW: 144 – 288 kHz  
CD player  
CD Capacity:  
3 CDs  
92 dB  
Dynamic range:  
Signal-to-noise ratio: 100 dB  
Wow and flutter:  
Immeasurable  
MD recorder  
Audio playing system: MiniDisc digital audio system  
Recording system:  
Reading system:  
Magneto-optical overwrite system  
Non-contact, semiconductor laser  
pickup (λ=780 nm)  
Error correction system: CIRC (Cross Interleave Reed-  
Solomon Code)  
Sampling frequency: 44.1 kHz  
(With sampling rate converter for  
recording — 32 kHz/44.1 kHz/  
48 kHz)  
Audio compression system:  
ATRAC (Adaptive TRansform  
Acoustic Coding)  
Download from Www.Somanuals.5co2m.All Manuals Search And Download.  

Intel Computer Hardware BOXDH61BF User Manual
Intel Computer Hardware SSDSC2BB240G401 User Manual
JVC Car Stereo System GET0626 001B User Manual
JVC Home Theater System TH M42 User Manual
JVC Stereo Amplifier KS AR8001D User Manual
Kenmore Clothes Dryer 3405602 User Manual
Kenmore Gas Grill 1481615421 User Manual
KitchenAid Cooktop KECC027 User Manual
KitchenAid Ice Maker 2313787 User Manual
Kodak Camera Accessories M522 User Manual