MICRO COMPONENT SYSTEM
UX-P3
— Consists of CA-UXP3 and SP-UXP3.
COMPACT
DIGITAL AUDIO
C
D
-
R
/
R
W
P
L
A
Y
B
A
C
K
STANDBY
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
·
P
3
CLOCK
STANDBY
/
ON
AHB PRO
SOUND
CD
TAPE
FM/AM
AUX
/
STANDBY/ON
DIRECT OPERATING
FUNCTION
VOLUME
TIMER
DISPLAY
SLEEP
AUX
FM/AM
TAPE
PROG RANDOM REPEAT
SOUND
MODE
AUTO
PRESET FM MODE
CD
CD
REV.MODE
REC
CANCEL
MULTI KEY
SET
A
U
T
O
R
E
V
E
R
S
E
AUTO TAPE SELECTOR
PHONES
AHB
PRO
VOLUME
RM-SUXP3U REMOTE CONTROL
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial No.
which are located either on the rear, bot-
tom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
GVT0053-014A
[UB]
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
CAUTION
•
Do not block the ventilation openings or holes.
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or
moisture.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to
get out.)
•
•
Do not place any naked flame sources, such as lighted
candles, on the apparatus.
When discarding batteries, environmental problems
must be considered and local rules or laws governing
the disposal of these batteries must be followed
strictly.
•
Do not use this apparatus in a bathroom or places with
water. Also do not place any containers filled with
water or liquids (such as cosmetics or medicines,
flower vases, potted plants, cups, etc.) on top of this
apparatus.
– G-2 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1 Front:
No obstructions and open spacing.
2 Sides/ Top/ Back:
No obstructions should be placed in the areas shown by the dimensions below.
3 Bottom:
Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10
cm or more.
15 cm
15 cm
1 cm
15 cm
1 cm
15 cm
15 cm
UX-P3
10 cm
UX-P3
– G-3 –
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT FOR LASER PRODUCTS
REPRODUCTION OF LABELS /
2
WARNING LABEL, PLACED INSIDE THE UNIT
1
CLASSIFICATION LABEL, PLACED ON REAR ENCLO-
SURE
ADVARSEL: Usynlig laser-
stråling ved åbning, når
sikkerhedsafbrydere er ude
af funktion. Undgå udsæt-
VARO: Avattaessa ja suo-
jalukitus ohitettaessa olet
CAUTION: Invisible laser
radiation when open and
interlock failed or defeated.
AVOID DIRECT EXPOSURE
VARNING: Osynlig laser-
strålning när denna del är
öppnad och spärren är
alttiina
lasersäteilylle. Älä katso
säteeseen. (f)
näkymättömälle
CLASS
LASER
1
urkopplad.
strålen.
Betrakta
ej
(s)
telse for stråling
(d)
TO BEAM.
(e)
PRODUCT
1. CLASS 1 LASER PRODUCT
2. CAUTION: Invisible laser radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user serviceable
parts inside the Unit; leave all servicing to qualified service personnel.
– G-4 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
We would like to thank you for purchasing one of our JVC products.
Before operating this unit, read this manual carefully and thoroughly to
obtain the best possible performance from your unit, and retain this manual
for future reference.
Power sources
• When unplugging from the wall outlet, always pull the
plug, not the AC power cord.
About This Manual
This manual is organized as follows:
• The manual mainly explains operations using the
buttons on the remote control.
DO NOT handle the AC power cord with wet
hands.
You can use the buttons both on the remote control and
on the unit for the same operations if they have the
same or similar names (or marks), unless mentioned
otherwise.
• Basic and common information that is the same for many
functions is grouped in one place, and is not repeated in
each procedure. For instance, we do not repeat the
information about turning on/off the unit, setting the
volume, changing the sound effects, and others, which are
explained in the section “Common Operations” on pages 9
and 10.
Moisture condensation
Moisture may condense on the lens inside the unit in the
following cases:
• After starting heating in the room
• In a damp room
• If the unit is brought directly from a cold to a warm place
Should this occur, the unit may malfunction. In this case,
leave the unit turned on for a few hours until the moisture
evaporates, unplug the AC power cord, and then plug it in
again.
• The following marks are used in this manual:
Gives you warnings and cautions to prevent
from damage or risk of fire/electric shock.
Also gives you information which is not good
for obtaining the best possible performance
from the unit.
Others
• Should any metallic object or liquid fall into the unit,
unplug the unit and consult your dealer before operating
any further.
• If you are not going to operate the unit for an extended
period of time, unplug the AC power cord from the wall
outlet.
Gives you information and hints you had better
know.
DO NOT disassemble the unit since there are no
user serviceable parts inside.
Precautions
If anything goes wrong, unplug the AC power cord and
consult your dealer.
Installation
• Install in a place which is level, dry and neither too hot nor
too cold — between 5˚C (41˚F) and 35˚C (95˚F).
• Install the unit in a location with adequate ventilation to
prevent internal heat built-up in the unit.
• Leave sufficient distance between the unit and the TV.
• Keep the speakers away from the TV to avoid interference
with TV.
DO NOT install the unit in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust or vibration.
Download from Www.Somanuals.–com1. A–ll Manuals Search And Download.
Contents
Location of the Buttons and Controls ....................... 3 Playing Back CDs (CD/CD-R/CD-RW).................. 12
Front Panel ................................................................. 3
Remote Control .......................................................... 5
Playing Back the Entire CD — Normal Play ........... 12
Basic CD Operations ................................................ 12
Programming the Playing Order of the Tracks
— Program Play ................................................. 13
Playing at Random — Random Play ....................... 14
Repeating Tracks — Repeat Play............................. 14
Prohibiting Disc Ejection — Tray Lock................... 14
Getting Started............................................................ 6
Supplied Accessories.................................................. 6
Putting the Batteries into the Remote Control ........... 6
Connecting Antennas ................................................. 6
Connecting Speakers .................................................. 7
Connecting Other Equipment..................................... 8
Playing Back Tapes ................................................... 15
Playing Back a Tape ................................................. 15
Common Operations .................................................. 9
Recording .................................................................. 16
Turning On the Power ................................................. 9
Setting the Clock ........................................................ 9
Setting the AM Tuner Interval Spacing ...................... 9
Selecting the Sources and Starting Play ..................... 10
Adjusting the Volume ............................................... 10
Reinforcing the Bass Sound ..................................... 10
Selecting the Sound Modes ...................................... 10
Recording on a Tape ................................................. 16
CD Direct Recording ................................................. 17
One Track Recording ................................................ 17
Using the Timers ....................................................... 18
Using Daily Timer and Recording Timer ................. 18
Using Sleep Timer .................................................... 19
Listening to FM and AM Broadcasts ...................... 11
Maintenance .............................................................. 20
Troubleshooting ........................................................ 21
Specifications............................................................. 22
Tuning in a Station ................................................... 11
Presetting Stations .................................................... 11
Tuning in a Preset Station ........................................ 11
Download from Www.Somanuals.–com2. A–ll Manuals Search And Download.
Location of the Buttons and Controls
Become familiar with the buttons and controls on your unit.
Front Panel
Front Panel
1
9
p
COMPACT
DIGITAL AUDIO
C
D
-
R
/
R
W
P
L
A Y
B
A
C
K
q
w
STANDBY
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
P
3
CLOCK
2
e
STANDBY ON
/
3
4
AHB PRO
r
CD
/
TAPE
FM/AM
AUX
5
DIRECT OPERATING
FUNCTION
VOLUME
TIMER
SOUND
6
7
t
y
u
i
REV.MODE
o
;
REC
a
A U T O R E V E R S E
AUTO TAPE SELECTOR
PHONES
8
s
Download from Www.Somanuals.–com3. A–ll Manuals Search And Download.
Continued
Display Window
2
1
3
[
]
DAILY REC SLEEP REC
CLOCK
ALL
BASS SOUND MONOST
PRGM RANDOM
4
5
6
7
8
9
See pages in the parentheses for details.
Front Panel
Display Window
1 Remote sensor
1 Tape operation indicators
• 2 3 (tape direction) and
indicators
2
(STANDBY/ON) button and STANDBY lamp
(9, 14, 19)
(reverse mode)
3 TAPE 2 3 button (10, 15, 16)
Pressing this button also turns on the unit.
4 CD 3/8 (play/pause) button (10, 12, 17)
Pressing this button also turns on the unit.
5 AHB (Active Hyper Bass) PRO button (10)
6 SOUND button (10)
2 Timer indicators
•
(timer), DAILY, REC and SLEEP indicators
3 REC indicator
4 CLOCK indicator
5 CD play mode indicators
• PRGM (program), RANDOM and repeat (
indicators
/
ALL)
7 AUX button (10)
Pressing this button also turns on the unit.
8 PHONES jack (10)
9 0 (disc tray open/close) button (12)
Pressing this button also turns on the unit.
p Disc tray
6 BASS (Active Hyper Bass) indicator
7 SOUND (sound mode) indicator
8 Tuner operation indicators
• MONO and ST (stereo) indicators
9 Main display
q FM/AM button (10, 11)
• Shows the source name, frequency, etc.
Pressing this button also turns on the unit.
w Display window
e CLOCK button (9)
r VOLUME + / – control (10)
t TIMER button (18, 19)
y ¢ (forward search) button (9, 11, 12, 14, 15, 18)
u 7 (stop) button (12 – 17)
i 4 (reverse search) button (9, 11, 12, 15, 18)
o REV.MODE (reverse mode) button (15 – 17)
; Cassette holder
a REC button (16, 17)
s 0 (eject) button for cassette deck (15 – 17)
Download from Www.Somanuals.–com4. A–ll Manuals Search And Download.
Remote Control
Remote Control
1 REPEAT button (14)
2 DISPLAY button (9)
3 PROG (program) button (13)
4 RANDOM button (14)
STANDBY/ON
5 SOUND MODE button (10)
6 AUTO PRESET button (11)
7 CD 0 (disc tray open/close) button (12)
Pressing this button also turns on the unit.
8 CD 3/8 button (10, 12, 13)
Pressing this button also turns on the unit.
9 4 (reverse search) button (11, 12, 15)
p 7 (stop) button (12 – 17)
1
2
e
r
t
y
DISPLAY
SLEEP
AUX
PROG RANDOM REPEAT
3
4
AUTO
SOUND
FM/AM
FM MODE
PRESET
MODE
5
6
7
8
TAPE
q CANCEL button (13)
CD
w AHB (Active Hyper Bass) PRO button (10)
u
i
o
CD
e
(STANDBY/ON) button (9)
r SLEEP button (19)
t AUX button (10)
9
p
Pressing this button also turns on the unit.
y FM/AM button (10, 11)
Pressing this button also turns on the unit.
u TAPE 2 3 button (10, 15)
Pressing this button also turns on the unit.
i FM MODE button (11)
q
;
a
CANCEL
MULTI KEY
SET
o ¢ (forward search) button (11, 12, 14, 15)
; SET button (11, 13)
a MULTI KEY > / < buttons (11 – 14)
s VOLUME + / – buttons (10)
AHB
PRO
VOLUME
s
w
RM-SUXP3U REMOTE CONTROL
COMPACT
DIGITAL AUDIO
C
D
-
R
/
R
W
P
L
A
Y
B
A
C
K
CLOCK
CT OPERATING
FUNCTION
VOLUME
TIMER
REV.MODE
REC
When using the remote control, point it at
the remote sensor on the front panel.
Download from Www.Somanuals.–com5. A–ll Manuals Search And Download.
Continued
Getting Started
Supplied Accessories
Connecting Antennas
Make sure that you have all the following items.
The number in the parentheses indicates the quantity of the
pieces supplied.
FM antenna
ANTENNA
• AM loop antenna (1)
• FM antenna (1)
• Remote control (1)
• Batteries (2)
FM antenna (supplied)
EXT
M LOOP
FM 75
OAXIAL
If anything is missing, consult your dealer immediately.
Putting the Batteries into the Remote Control
Insert the batteries — R6(SUM-3)/AA(15F) — into the
remote control, by matching the polarity (+ and –) on the
batteries with the + and – markings on the battery
compartment.
1 Attach the FM antenna to the FM 75 Ω
COAXIAL terminal.
2 Extend the FM antenna.
When the remote control can no longer operate the unit,
replace both batteries at the same time.
3 Fasten it up in the position which gives you
the best reception, then fix it on the wall, etc.
1
About the supplied FM antenna
The FM antenna supplied with this unit can be used as temporary
measure. If reception is poor, you can connect an outdoor FM
antenna.
To connect an outdoor FM antenna
Before connecting it, disconnect the supplied FM antenna.
R6(SUM-3)/AA(15F)
2
Outdoor FM antenna
(not supplied)
3
Coaxial cable
ANTENNA
EXT
AM LOOP
• DO NOT use an old battery together with a
new one.
FM 75
OAXIAL
• DO NOT use different types of batteries
together.
• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery
compartment when you are not going to use
the remote control for an extended period of
time. Otherwise, it will be damaged from
battery leakage.
A 75 Ω antenna with coaxial type connector should be
used.
Download from Www.Somanuals.–com6. A–ll Manuals Search And Download.
AM antenna
Connecting Speakers
2
]
]
1
3
ANTENNA
Vinyl-covered wire
(not supplied)
Red
1
AM EXT
AM LOOP
RIGHT
LEFT
Speaker
cord
Speaker
cord
MAIN
SPEAKERS
FM75
COAXIAL
SPEAKER
Black
IMPEDANCE
MIN
4
2
AM loop antenna
(supplied)
Right
speaker
Left
speaker
1 Connect the AM loop antenna to the AM
LOOP terminals as illustrated.
• If the AM loop antenna wire is covered with
vinyl, remove the vinyl by twisting it as
shown in the diagram.
1 Press and hold the clamp of the speaker
terminal on the rear of the unit.
2 Insert the end of the speaker cord into the
terminal.
2 Turn the AM loop antenna until you have the
best reception.
Match the polarity of the speaker terminals: Red (+) to
red (+) and black (–) to black (–).
To connect an outdoor AM antenna
When reception is poor, connect a single vinyl-covered wire
to the AM EXT terminal and extend it horizontally. (The AM
loop antenna must remain connected.)
3 Release the finger from the clamp.
IMPORTANT: Use only speakers with the same speaker
impedance as indicated by the speaker terminals on the
rear of the unit.
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
Download from Www.Somanuals.–com7. A–ll Manuals Search And Download.
To connect audio equipment with an optical digital
input terminal
Connecting Other Equipment
You can connect both of the analog and digital equipment.
You can record CD sound onto the connected digital
equipment.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
Protective plug
OPTICAL
DIGITAL
OUT
To connect audio equipment
Be sure that the plugs of the audio cords are colored: White
plugs and jacks are for left audio signals, and red ones for
right audio signals.
Before connecting the other equipment,
remove the protective plug from the
terminal.
Audio equipment
with an optical digital
input
OUT
To optical digital input
AUX
R
L
IN
Connect an optical digital cord (not supplied) between the
optical digital input terminal on the other equipment and the
OPTICAL DIGITAL OUT terminal.
To audio output
To audio input
Audio equipment
By using audio cords (not supplied), connect:
• Between the audio input jacks on the other equipment
and AUX OUT jacks: For recording on the other
equipment.
• Between the audio output jacks on the other equipment
and AUX IN jacks: For playing the other equipment.
Now, you can plug the AC power cord.
IMPORTANT: Be sure to check all connections to be done
before plugging the AC power cord into a wall outlet.
Download from Www.Somanuals.–com8. A–ll Manuals Search And Download.
Common Operations
Turning On the Power
2 Press ¢ or 4 to adjust
the hour, then press CLOCK.
The minute digits start flashing on the
display.
When you press the play button — CD 3/8, TAPE 2 3, or
the source selecting button — FM/AM, and AUX, the unit
automatically turns on and starts playback if the source is
ready.
CLOCK
CLOCK
To turn on the unit, press
(STANDBY/ON).
The STANDBY lamp on the unit goes out.
STANDBY/ON
STANDBY
3 Press ¢ or 4 to adjust
the minute, then press
CLOCK.
STANDBY ON
/
The CLOCK indicator remains lit on the
display.
CLOCK
To turn off the unit (on standby), press
ON) again.
(STANDBY/
CLOCK
The STANDBY lamp lights up.
• The CLOCK indicator flashes on the display until you set
the built-in clock. After setting the clock, the clock time
will appear on the display while the power is off.
• A little power is always consumed even while the unit is on
standby.
To check the clock time
DISPLAY
CLOCK
Press DISPLAY on the remote control (or CLOCK
on the unit) while playing any source.
• Each time you press the button, the source
indication and the clock time alternate on the
display.
To switch off the power supply completely, unplug the AC
power cord from the AC outlet.
When you unplug the AC power cord or if a power
failure occurs
The clock is reset to “0:00” right away, while the tuner preset
stations (see page 11) will be erased in a few days.
• When you unplug the AC power cord or if a power failure occurs,
the clock loses the setting and is reset to “0:00.” You need to set
the clock again.
• The clock may gain or lose 1 to 2 minutes per month.
Setting the Clock
Setting the AM Tuner Interval Spacing
Before operating the unit any further, first set the clock built
in this unit. When you plug the AC power cord into the wall
outlet, the CLOCK indicator starts flashing on the display.
You can set the clock whether the unit is on or off.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
When shipped, the AM tuner interval is set to 10 kHz or
9 kHz spacing. You can change it to 10 kHz or 9 kHz spacing.
On the unit ONLY:
To select 10 kHz intervals, while holding down ¢ in
standby mode, press
(STANDBY/ON) to turn on the
power (at the same time, the 100 kHz spacing is selected for
FM broadcast).
On the unit ONLY:
To select 9 kHz intervals, while holding down 4 in
standby mode, press
power.
CLOCK
1 Press CLOCK for more than 2
(STANDBY/ON) to turn on the
seconds.
The hour digits start flashing on the display.
[10 kHz Intervals]
[9 kHz Intervals]
CLOCK
STANDBY ON
/
STANDBY ON
/
When you change the setting
The preset stations are erased. You will need to preset the stations
again. (See page 11.)
Download from Www.Somanuals.–com9. A–ll Manuals Search And Download.
Selecting the Sources and Starting Play
Reinforcing the Bass Sound
To play back CDs, press CD 3/8. (See pages 12 – 14.)
To play back tapes, press TAPE 2 3. (See page 15.)
To listen to the FM/AM broadcasts, press FM/AM.
(See page 11.)
You can reinforce the bass sound to maintain rich (“AHB 1”
and “AHB 2”), full bass at low volume. This function only
affects the playback sound, but does not affect your
recording.
To select the external equipment as the source,
press AUX.
AHB
To get the effect, press AHB (Active Hyper
PRO
Bass) PRO until “AHB 1” or “AHB 2” appears
on the display. The BASS indicator also lights
up on the display.
AUX
FM/AM
TAPE
CD
BASS
Adjusting the Volume
• Each time you press the button, the bass sound change as
follows:
You can adjust the volume level only while the unit is turned
on. The volume level can be adjusted between “VOLUME 0”
and “VOLUME40”.
AHB 1
AHB 2
AHB OFF
(Canceled)
VOLUME
When using the remote control, press
VOLUME + to increase the volume or
press VOLUME – to decrease it.
“AHB 2” has much more bass reinforcement effect than
“AHB 1.”
To cancel the effect, press AHB PRO until “AHB OFF”
appears on the display. The BASS indicator goes off.
When using the unit, turn
VOLUME + / – clockwise (+) to increase
the volume or counterclockwise (–) to
decrease it.
Selecting the Sound Modes
VOLUME
You can select one of the 4 preset sound modes. This function
only affects the playback sound, but does not affect your
recording.
For private listening
To select the sound modes, press
SOUND MODE on the remote control (or
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers. Be sure to turn down the volume before
connecting or putting on headphones.
SOUND
MODE
SOUND on the unit) until the sound mode you
want appears on the display. The SOUND
DO NOT turn off (on standby) the unit with the
volume set to an extremely high level; otherwise, a
sudden blast of sound can damage your hearing,
speakers and/or headphones when you turn on the
unit or start playing any source next time.
REMEMBER you cannot adjust the volume level
while the unit is on standby.
indicator also lights up on the display.
SOUND
SOUND
• Each time you press the button, the sound modes change as
follows:
ROCK
POP
FLAT
(Canceled)
JAZZ
CLASSIC
ROCK:
POP:
Gives a heavy sound. Boosts low and high
frequency.
Good for vocal music.
CLASSIC: Good for classical music.
JAZZ:
Gives a feeling of live atmosphere. Good for
acoustic music.
FLAT:
The sound mode is canceled. The SOUND
indicator goes off.
– 10 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to FM and AM Broadcasts
Tuning in a Station
3 Repeat steps 1 and 2 to store stations for the
other band.
1 Press FM/AM.
FM/AM
The unit automatically turns on and tunes in
the previously tuned station (either FM or
AM).
When you cannot automatically store stations you want
Stations with weak signals cannot be detected with this automatic
presetting. To store such a station, use the manual presetting.
• Each time you press the button, the band
alternates between FM and AM.
To preset stations manually — Manual Presetting
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 2
again.
2 Press and hold ¢ or 4
for more than 1 second.
The unit starts searching for stations
and stops when a station of sufficient
signal strength is tuned in.
On the remote control ONLY:
If a program is broadcast in stereo, the ST (stereo)
indicator lights up.
1 Tune in the station you want to preset.
• See “Tuning in a Station.”
To stop searching, press ¢ or 4 .
2 Press SET.
SET
When you press ¢ or 4 briefly and repeatedly
The frequency changes step by step.
To change the FM reception mode
3 Press MULTI KEY > or
When an FM stereo broadcast is hard to receive or
MULTI KEY
FM MODE
MULTI KEY < to select a preset
noisy, press FM MODE on the remote control so
that the MONO indicator lights up on the display.
Reception improves.
number.
To restore the stereo effect, press FM MODE again so that
the MONO indicator goes off. In this stereo mode, you can
hear stereo sounds when a program is broadcasted.
4 Press SET again.
SET
Presetting Stations
The tuned station in step 1 is stored in the preset number
selected in step 3.
You can preset 30 FM and 15 AM stations — using either
automatic presetting or manual presetting.
• Storing a new station on a used number erases the
previously stored one.
In some cases, test frequencies have been already memorized
for the tuner since the factory examined the tuner preset
function before shipment. This is not a malfunction. You can
preset the stations you want into memory by following the
presetting method.
When you unplug the AC power cord or if a power
failure occurs
The preset stations will be erased in a few days. If this happens,
preset the stations again.
To preset stations automatically
— Automatic Presetting
You need to preset stations separately for the FM and AM
bands.
Tuning in a Preset Station
On the remote control ONLY:
On the remote control ONLY:
1 Press FM/AM to select the band.
FM/AM
1 Press FM/AM.
FM/AM
• Each time you press the button, the band
alternates between FM and AM.
The unit automatically turns on and tunes in
the previously tuned station (either FM or
AM).
AUTO
2 Press and hold AUTO PRESET for
• Each time you press the button, the band
alternates between FM and AM.
PRESET
more than 2 seconds.
Local stations with strong signals are searched
and stored in memory automatically.
When automatic presetting is over, the station
stored in preset number 1 is received.
2 Press MULTI KEY > or
MULTI KEY
MULTI KEY < to select a preset
number.
– 11 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Playing Back CDs (CD/CD-R/CD-RW)
This unit has been designed to playback the following CDs:
• CD
• CD-R
• CD-RW
3 Press CD 3/8.
CD
The disc tray automatically closes and the first
track of the CD starts playing.
Continued use of irregular shape CDs
(heart-shape, octagonal, etc.) can damage the
unit.
Track number
Elapsed playing time
• The CD automatically stops when the last track of the
CD has finished playing.
General Notes
To stop playing, press 7.
In general, you will have the best performance by keeping
your CDs and the mechanism clean.
• Store CDs in their cases, and keep them in cabinets or on
shelves.
Total track number
Total playing time
• Keep the unit’s disc tray closed when not in use.
To remove the disc, press CD 0 on the remote control (or 0
on the CD player section).
When playing a CD-R or CD-RW
User-edited CD-Rs (CD-Recordable) and CD-RWs
(CD-ReWritable) can be played back only if they are already
“finalized”.
• You can play back your original CD-Rs or CD-RWs
recorded in music CD format. (However, they may not be
played back depending on their characteristics or recording
conditions.)
• Before playing back CD-Rs or CD-RWs, read their
instructions or cautions carefully.
• Some CD-Rs or CD-RWs may not be played back on this
unit because of their disc characteristics, damage or stain
on them, or if the player’s lens is dirty.
• CD-RWs may require a longer readout time. (This is
caused by the fact that the reflectance of CD-RWs is lower
than for regular CDs.)
• If the CD cannot be read correctly (because it is scratched, for
example)
“00 0000” appears on the display.
• If no CD is inserted
“NO DISC” appears on the display.
• If an unreadable CD-R or CD-RW is inserted
“BLANK CD” appears on the display.
DO NOT try to open or close the CD tray by hand
as it will be damaged.
Basic CD Operations
Playing Back the Entire CD — Normal Play
While playing a CD, you can do the following operations.
CD
To stop playing for a moment
1 Press CD 0 on the remote control
CD
Press CD 3/8.
(or 0 on the CD player section).
The unit automatically turns on and the disc
tray comes out.
While pausing, the elapsed playing time
flashes on the display.
To resume playing, press CD 3/8 again.
To go to another track
2 Place a disc correctly on the circle of the disc
Press MULTI KEY > / MULTI KEY < or
MULTI KEY
tray, with its label side up.
¢ / 4 repeatedly before or during
playback.
• MULTI KEY > or ¢ :
Skips to the beginning of the
next or succeeding tracks.
• MULTI KEY < or 4 :
Goes back to the beginning of
the current or previous tracks.
INCORRECT
CORRECT
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
To locate a particular point in a track
During play, press and hold ¢ or 4.
• ¢ : Fast-forwards the tracks.
• 4 : Fast-reverses the tracks.
– 12 –
Download from Www.Somanuals.com. All Manuals Search And Download.
To check the program contents
You can check the program contents by
pressing PROG on the remote control. The
programed tracks are shown in the programed
order.
Programming the Playing Order of the Tracks
— Program Play
PROG
You can arrange the order in which tracks play before you
start playing. You can program up to 20 tracks.
To modify the program
On the remote control ONLY:
Before or after playing, you can erase the last
programed track by pressing CANCEL on the
remote control.
1 Load a CD.
CANCEL
• If the current playing source is not the CD player, press
CD 3/8, then 7 before going to the next step.
• Each time you press the button, the last programed track is
erased from the program.
2 Press PROG (program).
The PRGM (program) indicator lights up
on the display.
PROG
To add tracks in the program before playing, simply select
the track numbers you want to add by following step 3 of the
programming procedure.
PRGM
• If you try to program the 21st track
“FULL” will appear on the display.
• If the total playing time is 100 minutes or more
The total playing time will not be shown. “– –:– –” will appear.
• If a program has been stored in memory, the program is
called up.
3 Press MULTI KEY > or MULTI KEY < to
select the track number, then press SET.
SET
MULTI KEY
PRGM
Track number
Program step number
4 Repeat step 3 to program other tracks you
want.
CD
5 Press CD 3/8.
The tracks are played in the order you have
programed.
To stop playing, press 7.
To exit from Program play mode, press 7 before or after
playing. The PRGM (program) indicator goes off. All the
programed tracks will be cleared.
• Disc ejection also erases the program.
– 13 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing at Random — Random Play
Prohibiting Disc Ejection — Tray Lock
The tracks will play in no particular order when you use this
mode.
You can lock the disc tray and prohibit to eject the CD.
• This is possible only while the unit is turned on.
On the remote control ONLY:
To use Random play mode, press RANDOM
On the unit ONLY:
To prohibit disc ejection, press
RANDOM
before or during playing.
The RANDOM indicator lights up on the display.
(STANDBY/ON) while holding 7. (If the
disc tray is opened, close it first.)
“LOCKED” appears for a while, and the
disc tray is locked.
STANDBY ON
/
RANDOM
The tracks are played at random.
Random play ends when all the tracks are played once.
To cancel the prohibition and unlock the
CD, press
holding 7.
(STANDBY/ON) while
To skip the current track, press ¢ or MULTI KEY >.
• You cannot go back to the previous track by pressing 4
or MULTI KEY <.
“UNLOCKED” appears for a while, and the
disc tray is unlocked.
STANDBY ON
/
To stop playing, press 7.
• Random play mode is also canceled.
To exit from Random play mode, press RANDOM again
before or during playing. Random play mode is canceled and
Normal play resumes.
If you try to eject the CD,
“LOCKED” appears to inform you that the disc tray is locked.
Repeating Tracks — Repeat Play
You can have all the tracks, the program or individual track
currently playing to repeat as many times as you like.
On the remote control ONLY:
REPEAT
To repeat playing, press REPEAT before or
during playing.
• Each time you press the button, Repeat play
mode changes as follows, and the following indicator lights
up on the display:
ALL
Canceled
: Repeats one track.
: In Normal play mode, repeat all the tracks.
In Program play mode, repeat all the tracks in the
program.
ALL
In Random play mode, repeats all the tracks in
random order.
To stop playing, press 7.
To cancel Repeat play, press REPEAT repeatedly until the
repeat indicator goes off from the display.
• In Random play
cannot be selected. If
is selected
when you press RANDOM, it is canceled (goes off).
• Repeat mode remains in effect even when you change the
play mode.
– 14 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Tapes
You can play back type I, type II, and type IV tapes without
changing any settings.
To stop playing, press 7.
To fast-wind to the left or to the right, press ¢ or 4
while the tape is not running.
The tape direction indicator (3 or 2) starts flashing quickly
on the display.
Playing Back a Tape
To remove the cassette, press 0 for cassette deck.
1 Press 0 for cassette deck.
To play both sides — Reverse Mode
You can set the deck to play just one side of a tape, both sides
once, or both sides continuously.
Press REV.MODE on the unit.
• Each time you press the button, reverse mode
changes as follows:
REV.MODE
2 Put a cassette in with the exposed part of the
tape down.
:
The deck automatically stops after playing both
sides of the tape. (Stops when playback in the
2 direction is finished.)
:
:
The deck continues to play both sides of the
tape until 7 is pressed.
The deck automatically stops after playing one
side of the tape.
The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.
3 Close the cassette holder gently.
4 Press TAPE 2 3.
TAPE
The unit automatically turns on and the tape
play starts. The tape direction indicator
(3 or 2) flashes slowly on the display.
• Each time you press the button, the tape direction
changes.
3 : plays the front side.
2 : plays the reverse side.
When the tape plays to the end, the deck automatically
stops if the reverse mode is set to
play both sides — Reverse Mode.”)
or
. (See “To
– 15 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Recording
IMPORTANT:
Recording on a Tape
• It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
• The recording level is automatically set correctly, so it is
not affected by the VOLUME, AHB (Active Hyper Bass)
PRO, and SOUND MODE settings. Thus, during recording
you can adjust the sound you are actually listening to
without affecting the recording level.
On the unit ONLY:
1 Put a recordable cassette in with the exposed
part of the tape down.
• If recordings you have made have excessive noise or static,
the unit may be too close to a TV. Increase the distance
between the TV and the unit.
• You can use type I tape for recording.
To protect your recording
Cassettes have two small
tabs on the back to protect
from unexpected erasure or
re-recording.
To protect your recording, remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.
2 Close the cassette holder gently.
• If you want to record on both sides of a tape, see “To
record on both sides — Reverse Mode.”
3 Check the recording direction for the tape.
• If the tape direction is not correct, press TAPE 2 3
twice then 7 to change the tape direction.
To keep the best recording and playback sound quality
If the heads, capstans, and pinch rollers of the cassette decks
become dirty, the following will occur:
• Impaired sound quality
• Discontinuous sound
• Fading
4 Start playing the source — FM, AM or
auxiliary equipment connected to AUX jacks.
• When the source is CD, see “CD Direct Recording” on
page 17.
• Incomplete erasure
• Difficulty in recording
REC
5 Press REC.
The REC indicator lights up on the display and
recording starts.
To clean the heads, capstans, and pinch rollers
Use a cotton swab moistened with alcohol.
To stop recording, press 7.
Capstans
To remove the cassette, press 0 for cassette deck.
To record on both sides — Reverse Mode
Press REV.MODE on the unit until the
REV.MODE
indicator is lit.
Heads
• When using the reverse mode for recording,
start recording in the forward (3) direction first.
Otherwise, recording will stop when recording is done only
on one side (reverse) of the tape.
Pinch rollers
To demagnetize the heads
Turn off the unit, and use a head demagnetizer (available at
electronics and audio shops).
At the start and end of cassette tapes
There is leader tape which cannot be recorded onto. Thus, when
recording CDs or radio broadcasts, wind the leader tape first to
ensure that the recording will be made without any music part lost.
– 16 –
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Direct Recording
One Track Recording
Everything on the CD goes onto the tape in the order it is on
the CD, or according to the order you have made for Program
play.
This recording method is convenient when you record tracks
while playing a CD. You can only record your favorite songs
on the tape.
On the unit ONLY:
On the unit ONLY:
1 Put a recordable cassette in with the exposed 1 Put a recordable cassette in with the exposed
part of the tape down. part of the tape down.
2 Place a disc correctly on the circle of the disc 2 Play the track on the CD you wish to record.
tray, with its label side up.
REC
3 Press REC.
• If the current playing source is not the CD player, press
CD 3/8, then 7 before going to the next step.
• If you want to record on both sides of a tape, see “To
record on both sides — Reverse Mode.”
• If you do not want pauses of about 4 seconds recorded
between selections, press CD 3/8 twice. If nothing is
done, non-recorded pause will be automatically
recorded between selections.
The CD player returns to the beginning of that
track and the track is recorded on the tape. After
recording, the CD player and cassette deck
automatically stop.
4 Repeat steps 2 and 3 to record other tracks
you want.
REC
3 Press REC.
The REC indicator lights up on the display and
recording starts.
After recording, the CD player and cassette deck
automatically stop.
To stop CD Direct Recording, press 7. The tape stops after
4 seconds.
To remove the cassette, press 0 for the cassette deck.
To record on both sides — Reverse Mode
Press REV.MODE on the unit until
REV.MODE
the
indicator is lit.
• When using the reverse mode for CD Direct
Recording, start recording in the forward (3) direction
first. When the tape reaches its end while recording a song
in the forward direction (3), the last song will be re-
recorded at the beginning of the reverse side (2).
If you start recording on the reverse side (2), recording
will stop when recording is done only on one side (reverse)
of the tape.
When making SLEEP timer settings while doing CD
Direct recording
Set enough time to allow for the CD to finish playing; otherwise the
power will go off before recording is completed.
– 17 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Using the Timers
There are three timers available — Daily Timer, Recording
Timer, and Sleep Timer.
2 Set the on-time you want the
unit to turn on at.
Before using the timers, you need to set the clock built in the
unit (see page 9.) When you press TIMER on the unit for
more than 3 seconds, the display alternates between
“ADJUST” and “CLOCK” for about 5 seconds.
1) Press ¢ or 4 to set the hour,
then press TIMER.
2) Press ¢ or 4 to set the minute, then
press TIMER.
TIMER
The unit enters off-time setting mode.
[
]
DAILY
Using Daily Timer and Recording Timer
You can set the timer whether the unit is on or off.
When the on-time comes, the unit automatically turns on
3 Set the off-time you want the
unit to turn off (on standby)
at.
(the
indicator flashes just before the on-time, and
continues flashing while the timer is operating.) Then, when
the off-time comes, the unit automatically turns off (on
standby).
1) Press ¢ or 4 to set the hour, then press
TIMER
TIMER.
The timer setting remains in memory until you change it.
2) Press ¢ or 4 to set the minute, then
press TIMER.
• When the DAILY indicator is lit on the display, the timer
acts as the Daily Timer. Once the Daily Timer has been set,
it will be activated at the same time everyday until the timer
is turned off.
• When the REC indicator is lit on the display, the timer acts
as the Recording Timer. After the Recording Timer has
been performed, the details of the setting remain stored but
the timer is turned off.
The unit enters source selecting mode.
4 Press ¢ or 4 to select
the timer mode (Daily Timer
or Recording Timer) and the
source to play, then press TIMER.
• Each time you press ¢ or 4, the timer
mode and the source change as follows:
TIMER
Before you start...
DAILY
REC
TUNER
DAILY TAPE
TUNER
When using TUNER” as the source to play, make sure to
“
select the desired station before turning off the power.
DAILY
CD
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
DAILY TUNER: tunes into the last station you were
listening to. (Daily Timer)
REC TUNER: records the last station you were listening
to. (Recording Timer)
On the unit ONLY:
• Put a recordable cassette into the deck.
TIMER
DAILY CD:
plays a CD. (Daily Timer)
DAILY TAPE: plays a tape. (Daily Timer)
• Make sure that the tape direction is
1 Press and hold TIMER for more
than 3 seconds.
The timer ( ) indicator lights up, and the
timer mode indicator (DAILY or REC) and
the current on-time flash on the display.
The unit enters on-time setting mode.
correct.
5 Press ¢ or 4 to set the
volume level.
[
]
DAILY
• You can select the volume level
(“VOLUME 0” to “VOLUME40” and “VOLUME –”).
If you select “VOLUME –,” the volume is set to the last
level when the unit has been turned off.
To turn off the volume while the Recording Timer
(
REC TUNER) is working, set the volume level
“VOLUME 0.”
– 18 –
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER
Using Sleep Timer
6 Press TIMER to complete the timer
setting.
With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
7 Press
(STANDBY/ON) to turn
off the unit (on standby) if you have
set the timer with the unit turned
on.
STANDBY ON
/
How Sleep Timer actually works
The unit automatically turns off after the specified time
length passes.
• When the timer turns on the unit, the timer (
)
indicator and the selected timer mode indicator ( DAILY
or REC) start flashing.
On the remote control ONLY:
SLEEP
1 Press SLEEP.
The time length until the shut-off time appears
and the SLEEP indicator lights up on the display.
• Each time you press the button, the time length changes
as follows:
To cancel the setting, press and hold TIMER until the timer
(
) indicator goes off from the display.
10
20
30
60
90
120
Canceled
• If the unit is turned on when the timer-on time comes
Timer does not work.
• When you unplug the AC power cord or if a power failure
occurs
The timer will be canceled. You need to set the clock first, then
the timer again.
2 Wait for about 5 seconds after specifying the
time length.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly until the
SLEEP indicator goes off.
• Sleep Timer is also canceled when you turn off the unit.
• If you set the Sleep Timer after Daily Timer starts playing the
selected source
Daily Timer is canceled.
• If you set the Sleep Timer after Recording Timer starts
recording
Recording Timer is canceled, but recording continues until Sleep
Timer shuts off the power.
– 19 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
To get the best performance of the unit, keep your discs, tapes, and mechanism clean.
Handling discs
Cleaning the unit
• Remove the disc from its case by
holding it at the edge while pressing the
center hole lightly.
• Do not touch the shiny surface of the
disc, or bend the disc.
• Stains on the unit
Should be wiped off with a soft cloth. If the unit is heavily
stained, wipe it with a cloth soaked in water-diluted neutral
detergent and wrung well, then wipe clean with a dry cloth.
• Since the unit may deteriorate in quality, become
damaged or get its paint peeled off, be careful about the
followings.
• Put the disc back in its case after use to
prevent warping.
— DO NOT wipe it with a hard cloth.
— DO NOT wipe it strong.
— DO NOT wipe it with thinner or benzine.
— DO NOT apply any volatile substance such as
insecticides to it.
• Be careful not to scratch the surface of
the disc when placing it back in its case.
• Avoid exposure to direct sunlight,
temperature extremes, and moisture.
— DO NOT allow any rubber or plastic to remain in
contact with it for a long time.
To clean the disc
Wipe the disc with a soft cloth in a straight
line from center to edge.
DO NOT use any solvent — such as conventional
record cleaner, spray, thinner, or benzine — to
clean the disc.
Handling cassette tapes
• If the tape is loose in its cassette, take
up the slack by inserting a pencil in one
of the reels and rotating.
• If the tape is loose, it may get stretched,
cut, or caught in the cassette.
• Be careful not to touch the tape surface.
• Avoid the following places to store the
tape:
— In dusty places
— In direct sunlight or heat
— In moist areas
— On a TV or speaker
— Near a magnet
– 20 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you are having a problem with your unit, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person,
such as your dealer, for service.
Symptom
No sound is heard.
Cause
Action
• Connections are incorrect or loose.
• Check all connections and make
corrections. (See pages 6 to 8.)
• Disconnect the headphones.
• Headphones are connected.
• Antennas are disconnected.
Hard to listen to broadcasts because of
noise.
• Reconnect the antennas correctly and
securely.
• The AM loop antenna is too close to the
unit.
• Change the position and direction of the
AM loop antenna.
• The FM antenna is not properly extended
and positioned.
• Extend the FM antenna at the best
position.
The disc tray does not open or close.
The disc does not play.
The AC power cord is not plugged in.
The disc is placed upside down.
The disc is scratched or dirty.
Plug the AC power cord.
Place the disc with the label side up.
Clean or replace the disc. (See page 20.)
Turn on the unit.
The disc sound is discontinuous.
The cassette holder cannot be opened.
Power supply from the AC power cord has
been cut off while the tape was running.
Impossible to record.
Small tabs on the back of the cassette are
removed.
Cover the holes with adhesive tape.
Operations are disabled.
The built-in microprocessor may
malfunction due to external electrical
interference.
Unplug the AC power cord and then plug it
back in.
Unable to operate the unit from the remote
control.
• The path between the remote control and
the remote sensor on the unit is blocked.
• The batteries are exhausted.
• Remove the obstruction.
• Replace the batteries.
– 21 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Design and specifications are
subject to change without notice.
Specifications
UX-P3 (CA-UXP3 and SP-UXP3)
Cassette deck
Frequency response
Normal (type I):
Wow and flutter:
Amplifier
Output Power:
50 Hz – 14 000 Hz
0.15 % (WRMS)
44 W (22 W + 22 W) at 4 Ω (MAX.)
40 W (20 W + 20 W) at 4 Ω (10 % THD)
Audio input sensitivity/Impedance (at 1 kHz)
AUX:
Audio output level
AUX:
400 mV/48 kΩ
General
Power requirement:
Power consumption:
AC 230 V
, 50 Hz
260 mV/5.8 kΩ
50 W (at operation)
4.2 W (on standby)
505 mm x 256 mm x 295 mm (W/H/D)
8.5 kg
Digital output — OPTICAL DIGITAL OUT
Signal wave length: 660 nm
Dimensions (approx.):
Mass (approx.):
Output level:
–21 dBm to –15 dBm
Speakers/Impedance:
4 Ω – 16 Ω
Supplied Accessories
See page 6.
Tuner
FM tuning range:
AM tuning range:
87.50 MHz – 108.00 MHz
Speaker
Speaker units:
Impedance:
At 9 kHz intervals : 531 kHz – 1 710 kHz
At 10 kHz intervals :530 kHz – 1 710 kHz
8 cm cone x 1
4 Ω
Dimensions (approx.):
Mass (approx.):
160 mm x 256 mm x 205 mm (W/H/D)
2.1 kg
CD player
Dynamic range:
85 dB
Signal-to-noise ratio:
Wow and flutter:
90 dB
Immeasurable
– 22 –
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
0401MWMMDWJEM
EN, CH
Download from Www.Somanuals.com. All Manuals Search And Download.
|