COMPACT COMPONENT SYSTEM
HX-C6
—Consists of CA-HXC6 and SP-HXC6
SP-HXC6
CA-HXC6
SP-HXC6
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
INSTRUCTIONS
Model No.
Serial No.
LVT1350-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
[J]
IMPORTANT FOR LASER PRODUCTS
Note to CATV system installer:
1 CLASS 1 LASER PRODUCT
This reminder is provided to call the CATV system
installer’s attention to Section 820-40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
2 CAUTION: Do not open the top cover. There are no
user serviceable parts inside the Unit; leave all
servicing to qualified service personnel.
3
CAUTION: Visible and invisible laser radiation when
open and interlock failed or defeated. Avoid direct
exposure to beam.
4 REPRODUCTION OF LABEL: CAUTION LABEL,
PLACED INSIDE UNIT.
IMPORTANT POUR PRODUITS LASER
1 PRODUIT LASER CLASSE 1
2 ATTENTION: N’ouvrez pas le couvercle supérieur. Il
n’y a aucune pièce réparable par l’utilisateur à
l’intérieur de l’appareil; confiez toute réparation à un
personnel qualifié.
3 ATTENTION: Risque de radiations laser wisible et
invisible quand l’appareil est ouvert ou que le
systéme de verrouillage ne fonctionne pas ou a été
mis hors service. Évitez toute exposition directe au
rayon.
30 kg / 67 lbs.
CAUTION!
To avoid personal injury or accidentally dropping
theunit,havetwopersonsunpack,carry, and install the
unit.
ATTENTION!
Pour éviter toute blessure personnelle ou chute
accidentelle del’appareil, faites déballer, transporter et
installer l’appareil par deux personnes.
4 REPRODUCTION DE L’ÉTIQUETTE: ÉTIQUETTE
DE PRÉCAUTION PLACÉE À L’INTERIEUR DE
L’APPAREIL.
For Canada/pour le Canada
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
ATTENTION: POUR EVITER LES CHOCS
ELECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQUAU FOND.
For Canada/pour le Canada
THIS DIGITAL APPARATUS DOES NOT EXCEED
THE CLASS B LIMITS FOR RADIO NOISE
EMISSIONS FROM DIGITAL APPARATUS AS SET
OUT IN THE INTERFERENCE-CAUSING
EQUIPMENT STANDARD ENTITLED “DIGITAL
APPARATUS,” ICES-003 OF THE DEPARTMENT
OF COMMUNICATIONS.
CET APPAREIL NUMERIQUE RESPECTE LES
LIMITES DE BRUITS RADIOELECTRIQUES
APPLICABLES AUX APPAREILS NUMIRIQUES DE
CLASSE B PRESCRITES DANS LA NORME SUR LE
MATERIEL BROUILLEUR: “APPAREILS
NUMERIQUES”, NMB-003 EDICTEE PAR LE
MINISTRE DES COMMUNICATIONS.
G-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
• If you are not going to operate the System for an extended
period of time, unplug the AC power cord from the wall
outlet.
Precautions
Installation
• Install in a place which is level, dry and neither too hot nor
too cold—between 5°C and 35°C.
If anything goes wrong, unplug the AC power cord and
consult your dealer.
• Install the System in a location with adequate ventilation to
prevent internal heat buildup in the System.
How to Read This Manual
DO NOT install the System in a location
near heat sources, or in a place subject to
direct sunlight, excessive dust or vibration.
To make the explanations in this manual as simple and easy-
to-understand as possible, we have adapted the following
methods:
• Button and control operations are explained as listed in the
table below.
• Leave sufficient distance between the System and the TV.
• Keep the speakers away from the TV to avoid interference
with TV.
• Some related tips and notes are explained later in the
sections “Learning More about This System” and
“Troubleshooting,” but not in the same section
explaining the operations. If you want to know more about
the functions, or if you have a doubt about the functions, go
to these sections and you will find the answers.
Power sources
• When unplugging the System from the wall outlet, always
pull on the plug, not the AC power cord.
DO NOT handle the AC power cord with
wet hands.
Indicates that you press the button
briefly
.
Moisture condensation
Moisture may condense on the lenses inside the System in
the following cases:
• After starting to heat the room
Indicates that you press the button
briefly and repeatedly until an
option you want is selected.
• In a damp room
• If the System is brought directly from a cold to a warm
place.
Should this occur, the System may malfunction. In this case,
leave the System turned on for a few hours until the moisture
evaporates, unplug the AC power cord, then plug it in again.
Indicates that you press one of the
buttons.
Internal heat
•
A cooling fan is mounted on the rear panel to prevent heat
buildup inside the unit.
Indicate that you press and hold the
button for an specified periods.
• The number inside the arrow
indicates the period of press (in this
example, 2 seconds).
• If no number is inside the arrow,
press and hold until the entire
procedure is complete or until you
get a result you want.
2
sec.
For safety, observe the following carefully:
• Make sure there is good ventilation around
the unit. Poor ventilation could overheat
and damage the unit.
• DO NOT block the cooling fan and the
ventilation openings or holes. If they are
blocked by a newspaper or cloth, etc., the
heat may not be able to get out.
Indicate that you turn the control
toward the specified direction(s).
Others
• Should any metallic object or liquid fall into the System,
unplug the AC power cord and consult your dealer before
operating any further.
Indicates that this operation is only
possible using the remote control.
Remote
ONLY
DO NOT disassemble the System since
there are no user serviceable parts inside.
Indicates that this operation is only
possible using the buttons and controls on
the main unit.
Main Unit
ONLY
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction..................................................................1
Precautions......................................................................................1
How to Read This Manual ..............................................................1
Getting Started .............................................................3
Step 1: Unpack................................................................................3
Step 2: Prepare the Remote Control................................................3
Step 3: Hook Up..............................................................................4
Before Operating the System ......................................6
Parts Index ......................................................................................6
Daily Operations—Playback.......................................8
Listening to the Radio.....................................................................9
Playing Back a Disc......................................................................10
Playing Back from the PC.............................................................12
Daily Operations—Sound and Other
Adjustments.............................................................13
Adjusting the Volume...................................................................13
Reinforcing the Bass Sound..........................................................13
Selecting the Sound Modes...........................................................14
Selecting the Surround Modes......................................................14
Turning On or Off the Key-Touch Tone.......................................14
Setting the Clock...........................................................................14
Advanced Disc Operations ........................................15
Programming the Playing Order—Program Play .........................15
Playing at Random—Random Play ..............................................16
Repeating Playback—Repeat Play ...............................................17
Prohibiting Disc Ejection—Tray Lock .........................................17
Timer Operations.......................................................18
Turning Off the Power Automatically ..........................................18
Setting the Daily Timer.................................................................18
Additional Information..............................................20
Learning More about This System................................................20
Maintenance..................................................................................21
Troubleshooting ............................................................................21
Specifications................................................................................22
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1: Unpack
Step 1:Unpack the package and
check the accessories.
After unpacking, check to be sure that you have all the
following items. The number in parentheses indicates the
quantity of each piece supplied.
• FM antenna (1)
• AM loop antenna (1)
• Remote control (1)
• Batteries (2)
If any item is missing, consult your dealer immediately.
Step 2: Prepare the Remote Control
Insert the batteries into the remote control by matching the
polarity (+ and –) correctly.
1
Step 2:Prepare the remote control.
R6(SUM-3)/AA(15F)
2
Step 3:Hook up the components such
as AM/FM antennas, the
speakers, etc.
3
• DO NOT use an old battery together with a
new one.
• DO NOT use different types of batteries
together.
• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery
compartment when you are not going to
use the remote control for an extended
period of time. Otherwise, the remote
control will be damaged from battery
leakage.
Finally plug the AC power cord.
Now you can operate this System.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Step 3: Hook Up
If you need more detailed information, see page 5.
Illustrations of the input/output terminals below are
typical examples.
To assemble the AM loop antenna
When you connect other components, refer also to their
manuals since the terminal names actually printed on
the rear vary among the components.
Turn the power off to all components before
connections.
AM loop antenna (supplied)
Turn it until the best reception
is obtained.
FM antenna (supplied)
Extend it so that you can obtain
the best reception.
To a wall outlet
Plug the AC power cord only after all
connections are complete.
• Demonstration will start automatically. To
cancel it, see page 8.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
To connect the AM loop antenna cords
• Connect black cord to the H terminal, and the while cord to
the other terminal.
• DO NOT connect more than one speaker to
each terminal.
• DO NOT push or pull the speakers as this
will damage the foot spacers at the bottom of
the speakers.
1 Hold
2 Insert
3 Release
• If the AM loop antenna wire or speaker cords are covered with
vinyl, remove the vinyl to expose the tip of the antenna by
twisting the vinyl.
1 Hold
3 Release
2 Insert
• Make sure the antenna conductors do not touch any other
terminals, connecting cords and power cord. Also, keep the
antennas away from metallic parts of the System, connecting
cords, and the AC power cord. This could cause poor
condition.
Black
From left
speaker
For better FM/AM reception
Outdoor FM antenna
(not supplied)
Blue
Red
Vinyl-covered wire (not supplied)
When reception is poor, connect a single
vinyl-covered wire to the AM EXT terminal
and extend it horizontally.
From right
speaker
Black
To connect other equipment
By using a stereo mini plug cord (not supplied), you can connect
equipment with analog audio output jacks such as an MD
player, a TV, etc.
AM loop antenna
Keep it connected.
Stereo mini plug cord
(not supplied)
Audio equipment
output
(front panel)
Disconnect the supplied FM antenna, and
connect to an outdoor FM antenna using a 75 Ω
wire with coaxial type connector.
If the audio output on the other equipment is not stereo
mini plug type, use a plug adapter to convert the stereo mini
plug to the corresponding plug of the audio output.
To connect the speaker cords
IMPORTANT
• Always set volume to VOL MIN when connecting or
• The supplied speakers do not conform to magnetically
shielded design. Place the speakers enough distance from
a TV so that they do not cause color irregularity on the TV.
• When connecting the speaker cords, match their polarity
with that of the speaker terminals: red/blue to (+) and black
to (–).
disconnecting the other equipment.
DO NOT plug in any equipment until all
connections are complete.
• Use only speakers with the same speaker impedance as
indicated by the speaker terminals on the rear of the unit.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operating the System
Parts Index
Refer to the pages to see how to use the buttons and controls.
Remote control
14, 18
18
8, 12, 19
9, 11
9, 11, 15
8, 13
9, 14, 19
10, 16
14, 16, 18, 19
9, 11, 14, 16, 19
14
8, 13
13
8 – 10, 12
16
13
13
14
11, 15
10, 17
14
10, 15
Main unit
7
9
Remote sensor
8, 10
8, 9
8, 19
8, 12
11
Standby lamp
10, 14, 16, 17
10
10, 17
10
8, 13
14
13
9
8
13, 21
12
5
8
6
Download from Www.Somanuals.com. All Manuals Search And Download.
The indications on the display teach you a lot of things while you are operating the System.
Before operating the System, be familiar with when and how the indicator illuminates on the display.
1 BEEP ON indicator
• Lights when key-touch tone is activated.
2 Timer indicators
Display Window
1 2
3
4
5
• DAILY: lights when the Daily Timer stands by or is
working; flashes while the Daily Timer is being
set.
• SLEEP: lights when the Sleep Timer is activated.
•
: lights when Daily Timer stands by or being set; flashes
while the Daily Timer is working.
6 7 8
9
p q w
e
3 RESUME indicator
• Lights when Resume Play for MP3 disc is activated.
4 Main display
5 Disc operation indicators
Indications on the main display
• While listening to radio:
Band
Frequency
• PROGRAM: lights when Program Play mode is activated.
• RANDOM: lights when Random Play is activated.
• REPEAT: lights when Repeat Play mode is activated.
• ALL, 1, DISC:
Reception mode (FM only)
– ALL DISC: lights when All Disc Play/Repeat is activated.
– 1: lights when One Track Repeat is activated.
– 1 DISC: lights when One Disc Play/Repeat is activated.
6 Audio level indicator
• While playing a disc:
CD:
Track number
Elapsed playing time
7 GROUP indicator
• Lights when the ALBUM mode is selected for MP3
playback.
8 CD PLAY indicator
TRACK indicator
1
MP3* :
• Lights when “CD” is selected as the source.
9 Disc indicators
2
Track number*
Elapsed playing time
• Each indicator shows the status of a disc placed on the
corresponding disc tray (DISC1 – DISC5).
– Lights up when a disc is detected.
– Flashes when the tray is currently selected.
– Goes off when the unit detects there is no disc loaded on
the disc tray.
• While disc play is stopped:
CD:
Total track number
Total playing time
p TRACK indicator
• Lights when a CD is loaded.
• Lights when the TRACK mode is selected for MP3
playback.
q S.MODE indicator
• Lights when the Sound mode is activated.
w SURR. indicator
TRACK indicator
Total track number
MP3:
• Lights when the Surround mode is activated.
e FM reception indicators
• ST: lights while an FM stereo station with sufficient signal
strength is tuned in.
• MONO: lights when monaural reception mode is selected.
• While selecting “AUX” or “USB”:
Source name
*1 At the playback beginning, the file name will be shown for
a while after the track number and elapsed playing time.
*2 In the TRACK mode: Track number on the disc.
In the ALBUM mode: Track number in the current group
(see page 11).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily Operations—Playback
¥ Turn on the power.
In this manual, the operation using the remote control
The standby lamp on the main unit goes off.
is mainly explained; however, you can use the buttons
and controls on the main unit if they have the same (or
similar) name and marks.
• Without pressing STANDBY/ON
turns on by pressing one of the source select button in step
ø.
, the System also
ø Select the source.
Playback automatically starts if the selected source is ready
to start.
• If you press AUX/USB, start playback source on the
external audio component or the PC.
1
10 keys
(1–10,+10)
π Adjust the volume.
FM MODE/
MP3
[ Operate the target source as explained
later.
7
3
SET
4/1
To turn off (stand by) the System
¡/¢
The standby lamp on the unit lights in
red.
• A small amount of power is always
consumed even while on standby.
3
2
REPEAT
PROGRAM
DISC 1– 5
For private listening
Connect a pair of headphones to the PHONES jack on the main
unit. The sound will no longer come out of the speakers. Be sure
to turn down the volume before connecting or putting the
headphones.
• Disconnecting the headphones will activate the speakers
again.
1
2
DO NOT turn off (stand by) the System with
the volume set to an extremely high level;
Otherwise, the sudden blast of sound can
damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
To cancel the demonstration
Main Unit
ONLY
DEMO OFF
DEMO START
3
Press and hold until “DEMO OFF” appears on the display.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
To preset stations
To save the power consumption while on
standby—Eco mode
Main Unit
ONLY
You can preset 30 FM and 15 AM stations.
While on standby...
1 Tune in to a station you want to preset.
2 Enter into the presetting mode.
ECO
Canceled
The display illumination (including the display
demonstration) disappears.
Listening to the Radio
3 Select a preset number for the station you store.
To select the band (FM/AM)
FM
AM
To tune in to a station
While FM or AM is selected...
4 Store the station.
2
sec.
Increases the frequencies.
Decreases the frequencies.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency search stops.
To stop searching manually, press either button.
To tune in to a preset station
1 Select the band (FM or AM).
FM
If the received FM station is hard to listen
Remote
ONLY
The MONO indicator lights on the
display. Reception will improve though
stereo effect is lost—monaural reception
mode.
To restore the stereo effect, press the
button again (the MONO indicator goes
off).
AM
2 Select a preset number for the station you store.
Examples:
To select preset number 5,
press 5.
To select preset number 15,
press +10, then 5.
To select preset number 30,
press +10, +10, then 10.
• You can also use the PRESET +/– control on the unit.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
To pause playback
Remote control:
Playing Back a Disc
This System can play back the following discs—regular CD
and CD-R/RW (recorded in the audio CD format and in the
ISO 9660 format for MP3 files).
Main unit:
Main Unit
To insert discs
ONLY
To release it, press the
button again.
To release it, press CD #.
To select a playback disc
Remote control:
1
2
5
3
4
Main unit:
Ex.: To select DISC 1
Playback of the selected disc starts.
• You can play all loaded discs continuously—All Disc Play,
or one selected disc—One Disc Play.
Before playback or while playing...
• When using an 8 cm disc, place it
on the inner circle of the disc tray.
ALL DISC
1 DISC
REPEAT 1*
REPEAT ALL DISC
*
REPEAT 1 DISC
*
REPEAT
To close the disc tray, push up the same control (0) again.
If you push down the same control (3), the disc tray closes
automatically and playback starts.
*See page 17.
ALL DISC indicator
• When you push up the control (0) for the next tray you
want to place another disc onto, the first disc tray
automatically closes and then next tray comes out.
• When you load an MP3 disc, you can select playback mode.
See “To select MP3 playback mode” on page 11.
Ex.:When All Disc play is selected.
ALL DISC All the loaded discs are played in sequence.
Ex.: When playback starts from DISC 2:
DISC 2]DISC 3]DISC 4]DISC5]
DISC 1](then stops)
To start:
To stop:
1 DISC
Playback stops when all tracks on the
selected disc are played once.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
To select a track
To skip MP3 tracks
•
See the right column for an MP3 disc.
While playing a disc...
TRACK
Increases the track
numbers.
ALBUM
Remote
ONLY
Decreases the track
numbers.
To select an MP3 track directly
In the TRACK mode:
Selects a track number on
the current MP3 disc.
To locate a particular portion
While playing a disc, press and hold the button until the
portion you want is reached.
In the ALBUM mode:
Selects a track number in
the current group.
Fast-forwards the track.
Fast-reverses the track.
To select a group on an MP3 disc
TRACK
ALBUM
Remote
ONLY
To select a track directly
Track number in the
selected group
Examples:
Selected group number
To select track 5, press 5.
To select track 15, press +10,
then 5.
To select track 30, press +10,
+10, then 10.
The first track of the selected group starts playing.
Remote
ONLY
To select MP3 playback mode
Resume Play for MP3 discs
Before playback or while playing an MP3 disc...
While playing an MP3 disc, this System can store the
number of the track that you have stopped playback. By
pressing CD 6, you can start playback again from the
beginning of the same track—Resume Play.
To activate/deactivate Resume Play
TRACK
ALBUM
TRACK
mode
The System recognizes only tracks (files).
You can play an MP3 disc like an Audio CD.
RESUME ON
RESUME OFF
PROGRA
ALBUM
mode
The System recognizes tracks (files) and
albums (groups) on an MP3 disc. You can
play the MP3 disc according to the way how
they are grouped. (The GROUP indicator
lights up on the display.)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4 The USB drivers are installed automatically.
• If the USB drivers are not installed automatically,
install the USB drivers following the instructions on the
PC’s monitor.
Playing Back from the PC
This System is equipped with a USB terminal on the front
panel. You can connect your PC to this terminal and enjoy
sound reproduced through your PC.
When you connect your PC for the first time, follow the
procedure below.
• Remember you cannot send any signal or data to your PC
from this System.
5 Check if the drivers are correctly installed.
1
Open the Control Panel on your PC: Select [Start] =
[Settings] = [Control Panel]
Click [System] = [Hardware] = [Device Manager]
= [Sound, video and game controllers] and
[Universal Serial Bus controllers]
2
IMPORTANT
• Always set volume to VOL MIN when connecting or
• The following window appears, and you can check
whether the drivers are installed.
disconnecting the other equipment.
DO NOT turn off the System and disconnect
the USB cable while installing drivers and
playing back, and for several seconds after
your PC recognizes the System.
How to install the USB drivers
The following procedure is described using the English
R
version of Windows XP. If your PC is running on a
different version of Windows, the screens shown on your
PC’s monitor will differ from the ones used in the following
procedure.
*The installed drivers can be shown only when the System is
connected to the PC.
R
1 Turn on your PC and start running Windows 98SE,
R
R
R
Windows Me, Windows 2000 or Windows XP.
• If the PC has been turned on, quit all the applications
now running.
To play back sounds on the PC
Refer to the manuals supplied with the sound reproduction
application installed in the PC.
• Noise and static electricity may stop the sound through the
USB connection. In this case, do the following operations:
– Disconnect and connect the USB cable again.
– Restart the music software on your PC.
2 Turn on the System and select USB for the source.
AUX
USB
– Turn off and on the System.
3 Connect the unit to the PC using a USB cable (not
supplied).
®
®
®
®
• Microsoft , Windows 98SE, Windows Me, Windows
®
2000 and Windows XP are registered trademarks of
Microsoft corporation.
USB cable
(front panel)
PC
• Use “USB series A plug to B plug” cable when
connecting.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily Operations—Sound and Other Adjustments
Adjusting the Volume
Remote Control
The volume level can be adjusted in 32 steps (VOL MIN,
VOL 1 – VOL 30, and VOL MAX).
Remote control:
Main unit:
CLOCK
/TIMER
VOLUME +/–
CANCEL
SET
4
RHYTHM AX
SOUND MODE
FADE MUTING
¢
Remote
ONLY
To drop the volume in a moment
DISPLAY
SUBWOOFER
LEVEL +/–
BEEP
To restore the volume, press the button again, or adjust the
volume level.
Reinforcing the Bass Sound
To adjust the subwoofer level gradually
You can select the subwoofer level from level 0 (minimum)
to level 2 (maximum).
Main unit
Remote control:
Main unit:
BEEP
To emphasize rhythm feeling—RHYTHM AX
This function emphasizes bass attack feeling, and also
changes the subwoofer level.
SUBWOOFER
LEVEL +
VOLUME +/–
SOUND MODE
ON
(subwoofer level 2)
SURROUND MODE
OFF
(subwoofer level 0)
SUBWOOFER
LEVEL –
RHYTHM AX
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Sound Modes
You can select one of the preset Sound Modes.
Remote control:
Turning On or Off the Key-Touch Tone
Remote control:
BEEP ON
ROCK
POP
BEEP OFF
BEEP
OFF
CLASSIC
(Canceled)
Main unit:
Main unit:
2
sec.
ROCK
POP
BEEP ON
OFF
CLASSIC
BEEP OFF
(Canceled)
Remote
ONLY
ROCK
POP
Boosts low and high frequency.
Good for vocal music.
Setting the Clock
Without setting the built-in clock, you cannot use Daily
Timer (see page 18).
CLASSIC
Good for classical music.
• To exit from the clock setting, press CLOCK/TIMER as
required.
• To go back to the previous step, press CANCEL.
• If you have already adjusted the clock before, press
CLOCK/TIMER repeatedly in step 1, until the clock setting
mode is selected.
Selecting the Surround Modes
Main Unit
ONLY
You can select one of the Surround Modes to create being-
there feeling in your room.
1 Enter into clock setting mode.
DANCE
HALL
OFF
(Canceled)
STADIUM
2 Adjust the hour, then minute.
DANCE
HALL
Increases resonance and bass.
Adds depth and brilliance to the sound.
STADIUM
Adds clarity and spreads the sound, as in
an outdoor stadium.
Now the built-in clock starts working.
Remote
ONLY
To check the current time during play
Clock
Source information
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Disc Operations
Remote
ONLY
Programming the Playing Order
—Program Play
Remote Control
You can arrange the playing order of the tracks (up to 32
tracks) before you start playback.
• Program Play cannot be used for MP3 discs.
10 keys
(1–10,+10)
1 Before starting playback, activate Program Play.
PROGRAM
Canceled
SET
CANCEL
¢/4
PROGRA
7
PROGRAM indicator
CD 3/8
REPEAT
PROGRAM
RANDOM
2 Select a disc.
DISC 1 – 5
1
2
5
3
4
3 Select tracks you want for Program Play.
Examples:
To select track 5, press 5.
Main unit
To select track 15, press
+10, then 5.
To select track 30, press
+10, +10, then 10.
Disc number
Program step number
7
0
Track number
4 Repeat steps 2 and 3 until you program all tracks you
want.
5 Start playback.
The tracks you have selected
are played back in the order
you have programmed.
• When all the programmed tracks played, the System
exits from Program Play.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
To pause:
To stop:
Playing at Random—Random Play
You can play the contents of the current disc at random.
Before playback or while playing...
RANDOM
Canceled
RAND
To release it, press the button The System exits from
again.
Program Play.
To skip:
RANDOM indicator
Random Playback starts. Random Play ends when all the
contents of the disc are played.
Remote
ONLY
To pause:
To stop:
To check the programmed contents
While the PROGRAM indicator lights on the display and
before playback...
in the programmed order.
To release it, press the button The System exits from
again.
Random Play.
in the reverse order.
To skip:
To modify the program
While the PROGRAM indicator lights on the display and
before playback...
To erase the last step:
To erase the entire
program:
Playback skips to the next track selected randomly.
To exit from Random Play while playback...
RANDOM
Canceled
RAND
To add steps in the program
Repeat steps 2 and 3 on page 15.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
Main Unit
ONLY
Repeating Playback—Repeat Play
Prohibiting Disc Ejection—Tray Lock
You can repeat playback.
• Repeat Play and Random Play cannot be used at the same
time.
You can prohibit disc ejection from the System and lock
discs.
• This operation is possible only when the source is the CD
player.
Before playback or while playing...
ALL DISC
*
1 DISC
*
REPEAT 1
While the disc tray is closed...
REPEAT ALL DISC
REPEAT 1 DISC
1
Push up and hold
0
for any disc tray while holding
7.
REPEAT
*See page 10.
Repeat mode indicators
(while holding...)
2 Release 7, then
0.
Ex.: When One Disc Repeat (“REPEAT 1 DISC”) is
selected.
REPEAT 1
Repeats the current track.
REPEAT 1 DISC
Repeats all tracks on the current
disc.
• If you try to eject discs while Tray Lock is in use,
“LOCKED” appears to inform you that the disc trays are
locked.
REPEAT ALL DISC Repeats all tracks on all the loaded
discs.
• “REPEAT 1 DISC” cannot be selected for Program Play. It
is also canceled when you select Program Play.
To cancel the prohibition, repeat the same procedure.
“UN LOCKED” appears on the display.
To exit from Repeat Play while playback...
ALL DISC
1 DISC
REPEAT 1
REPEAT ALL DISC
REPEAT 1 DISC
REPEAT
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Operations
Remote
ONLY
Turning Off the Power Automatically
Remote Control
With Sleep Timer, you can fall asleep to music.
SLEEP
While the System is turned on...
CLOCK
/TIMER
STANDBY/ON
SLEEP 10
SLEEP 20 SLEEP 30
SLEEP 120
SLEEP 60
SLEEP 90
OFF
CANCEL
SET
(Canceled)
4
¢
To check the time remaining until the shut-off time
• If you press the button repeatedly, you
can change the shut-off time.
Remote
ONLY
Setting the Daily Timer
Using Daily Timer, you can wake up with your favorite
song.
Main unit
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
1 Select the timer setting mode for Daily Timer—
“TIMER ON.”
DAILY
TIMER (ON)
Clock setting
STANDBY/ON
Canceled
18
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
4
Set the hour then minute for on-time.
Set the hour then minute for off-time.
To turn off the Daily Timer
Since Daily Timer is activated at the same time everyday,
you may need to cancel it on some particular days.
DAILY
TIMER (ON)
Clock setting
Canceled
Select the playback source—“TUNER FM,” “TUNER
AM,” “CD,” “AUX,” or “USB.”
• The timer (
) indicator goes off.
To turn on the timer again...
DAILY
TIMER (ON)
Clock setting
Ex.: When “TUNER FM” is selected.
Canceled
1
2
Select a preset station for “TUNER FM” and
“TUNER AM.”
Select the volume level.
5 Turn off the System (on standby) if you have set the
timer with the System turned on.
How Daily Timer actually works
Once the Daily Timer has been set, the timer (
)
indicator and DAILY indicator are lit on the display.
Daily Timer is activated at the same time everyday until
the timer is turned off manually (see the next column).
When the on-time comes
The System turns on, tunes in to the specified station or
start playing the specified source, and sets the volume
level to the preset level.
When the off-time comes
The System stops playback, and turns off (stands by).
• The timer setting remains in memory until you change
it.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Daily Operations—Sound and Other Adjustments
(see pages 13 and 14)
Learning More about This System
Adjusting the Volume:
• Be sure to turn down the volume before connecting or putting
the headphones.
• When you turn off the System with the volume level set to
“VOL 16” or higher, the volume level is reset to “VOL 15”
next time you turn on the System.
Daily Operations—Playback (see pages 8 to 12)
Listening to the Radio:
• When you repeatedly press ¡/1, the frequency changes
step by step.
• If you store a new station into an occupied preset number, the
previously stored station in that number will be erased.
• When you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If this
happens, preset the station again.
Adjusting the Sound:
• This function also affects the sound through the headphones.
• The subwoofer lamp(s) indicates the current subwoofer
level—1 or 2. (If the level is “0,” the lamp(s) turns off.)
Selecting the Sound Modes:
• The sound mode lamp lights when one of the sound mode is
activated.
Selecting the Surround Modes:
• The Surround mode lamp lights when one of the Surround
mode is activated.
Setting the Clock:
Playing Back a Disc:
• The Non-DVD side of a “DualDisc” does not comply with the
“Compact Disc Digital Audio” standard. Therefore, the use of
Non-DVD side of a DualDisc on this product may not be
recommended.
• This System cannot play “packet write” discs.
• For MP3 playback...
– MP3 discs require a longer readout time than regular CDs.
(It depends on the complexity of the group/file
configuration.)
– Some MP3 files cannot be played back and will be skipped.
This result from their recording processes and conditions.
– When making MP3 discs, use ISO 9660 Level 1 or level 2
for disc format.
– This System can play back MP3 files with the extension
code <.mp3> (regardless of the letter case—upper or
lower).
– It is recommended that you make each MP3 files at a
sampling rate of 44.1 kHz and at bit rate of less than 64
kbps.
– This System manages files and folders as “tracks” and
“groups.”
– This System can recognize up to 90 groups per disc (up to
750 tracks).
• You can exchange discs while playing or selecting another
disc.
• One Disc Play is also canceled when you change the source or
turn off the System.
• If the MP3 file has ID3 Tags (Version 1.0 or 1.1), the track title
(“<TITLE>”) and performer name (“<ARTIST>”) will be
shown after the file name appears.
• Your entry will be ignored if you have tried to enter a track
number that does not exist on the disc or in the group (for
example, selecting track 14 in the group that only has 12
tracks).
• “- -:- -” will flash on the display until you set the clock.
Advanced Disc Operations (see pages 15 to 17)
ProgrammingthePlayingOrder—ProgramPlay:
• While programming steps...
– If you try to program a disc number which the System has
not read, “NO READ” appears on the display.
– If you try to program a disc number on which no disc is
loaded, “NO DISC” appears on the display.
– Your entry will be ignored if you have tried to program an
item number that does not exist on the disc (for example,
selecting track 14 on a disc that only has 12 tracks). Such
entries are ignored.
• If you try to add a 33rd track, “FULL” appears on the display.
• The program contents will be erased when...
– You unplug the AC power cord.
– You open the disc tray currently selected (regardless of the
play mode).
Playing at Random—Random Play:
• Activating Random Play cancels Repeat Play or All Disc Play.
(One Disc Play is automatically selected.)
• Activating Random Play for an MP3 disc changes the
ALBUM mode to the TRACK mode.
• Random Play is also canceled when you eject the disc or
change the disc to play.
Repeating Playback—Repeat Play:
• Repeat Play is also canceled when you change the source or
turn off the System.
• The memory of the track number for Resume Play will be
erased when you eject the disc or you change the disc to play.
• If you unplug the AC power cord, Resume Play is back to on.
Timer Operations (see pages 18 and 19)
Turning Off the Power Automatically:
• If you turn off the System, Sleep Timer is canceled.
Setting the Daily Timer:
• When you unplug the AC power cord or if a power failure
occurs, the timer will be canceled. You need to set the clock
first, then the timer again.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operations:
Maintenance
To get the best performance of the System, keep your discs
clean.
Hard to listen to broadcasts because of noise.
] Antenna connections are incorrect or loose (see pages 4
and 5).
] The AM loop antenna is too close to the System.
Handling discs
• Remove the disc from its case by holding it at the edge while
pressing the center hole lightly.
• Do not touch the shiny surface of the disc, or bend the disc.
• Put the disc back in its case after use to prevent warping.
• Be careful not to scratch the surface of the disc when placing
it back in its case.
• Avoid exposure to direct sunlight, temperature extremes, and
moisture.
] The FM antenna is not properly extended and positioned.
Disc Operations:
The disc does not play.
] The disc is placed upside down. Place the disc with the label
side up.
The disc sound is discontinuous.
] The disc is scratched or dirty.
The disc tray does not open or close.
] The AC power cord is not plugged in.
] Tray Lock is in use (see page 17).
] Program Play is in use. Exit from Program Play (see
page 16).
To clean the disc:
Wipe the disc with a soft cloth in a straight line from center to
edge.
Cleaning the System
USB Operations:
• Stains should be wiped off with a soft cloth. If the System is
heavily stained, wipe it with a cloth soaked in water-diluted
neutral detergent and wrung well, then wipe clean with a dry
cloth.
Unable to play back through the USB connection.
] USB connection and setting is incorrect (see page 12).
The sound through the USB connection stops.
] Noise and static electricity may stop the sound through the
USB connection. In this case, do the following operations:
• Disconnect and connect the USB cable again
• Restart the music software on your PC
• Since the System may deteriorate in quality, it become
damaged or get its paint peeled off, be careful about the
following:
– DO NOT wipe it with a hard cloth.
– DO NOT wipe it strong.
• Turn off and on the system
– DO NOT wipe it with thinner or benzine.
– DO NOT apply any volatile substance such as insecticides
to it.
DO NOT allow any rubber or plastic to remain in contact with
it for a long time.
Timer operations:
Daily Timer does not work.
] The System has been turned on when the on-time comes.
Timer starts working only when the System is turned off.
If you still have a problem, reset the System.
While in standby...
Main Unit
ONLY
Troubleshooting
If you are having a problem with your System, check this list for
a possible solution before calling for service.
General:
Adjustments or settings are suddenly canceled before you
finish.
Press and hold until the display flashes.
The factory default settings are restored and all the settings
you have made are erased.
] There is a time limit. Repeat the procedure again.
Operations are disabled.
] The built-in microprocessor may malfunction due to
external electrical interference. Unplug the AC power cord
and then plug it back in.
Unable to operate the System from the remote control.
] The path between the remote control and the remote sensor
on the System is blocked. Remove the obstruction.
] The batteries are exhausted.
No sound is heard.
] Speaker connections are incorrect or loose (see pages 4
and 5).
] Headphones are connected. Disconnect the headphones.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Speaker section—SP-HXC6
Amplifier section—CA-HXC6
Output Power:
SUB WOOFER:
Type:
4-Way Front Twin Woofer
Speaker Systems:
Subwoofer:
Woofer:
170 W per channel, min. RMS,
driven into 6 Ω at 63 Hz with no more
than 10% total harmonic distortion.
5
16 cm (6 / in.) cone x 1
16 cm (6 / in.) cone x 1
16
5
16
13
Mid range:
Tweeter:
7 cm (2
2 cm (13/ in.) piezo x 1
/
in.) cone x 1
16
MAIN SPEAKER: 80 W per channel, min. RMS, driven
into 4 Ω at 1 kHz with no more than
10% total harmonic distortion.
Audio input sensitivity/impedance:
AUX:
16
Power handling capacity:
Subwoofer:
340 (170 + 170) W
Main speaker: 160 (80 + 80) W
Impedance:
Subwoofer:
400 mV/47 kΩ
USB Version 1.1
USB:
6 Ω
Speakers/impedance:
SUB WOOFER:
MAIN SPEAKER:
Main speaker: 4 Ω
6 Ω – 16 Ω
4 Ω – 8 Ω
Frequency range:
Subwoofer:
Main speaker: 50 Hz – 20 000 Hz
Sound pressure level:
Subwoofer:
25 Hz – 1 000 Hz
Tuner
FM tuning range:
AM tuning range:
73 dB/W•m
87.5 MHz – 108.0 MHz
530 kHz – 1 710 kHz
Main speaker: 82 dB/W•m
Dimensions (W/H/D) (approx.):
295 mm x 452 mm x 387 mm
5
13
1
CD player
CD capacity:
(
11 / in. x 17
/
in. x 15 / in.)
8
16
4
5 discs
Mass (approx.):
8.6 kg (19.0 lbs) each
Dynamic range:
Signal-to-noise ratio:
Wow and flutter:
87 dB
90 dB
Immeasurable
Design and specifications are subject to change without notice.
MP3 recording format: MPEG 1/2 Audio Layer 3
Max. Bit rate:
320 kbps
General
Power requirement:
Power consumption:
AC 120 V
, 60 Hz
90 W/110 VA (at operation)
11 W (on standby; with power saving
off—Normal mode)
1.2 W (on standby; with power saving
on—Eco mode)
Dimensions (W/H/D) (approx.):
175 mm x 373 mm x 389 mm
15
11
3
(6
/
in. x 14
/
in. x 15 / in.)
16
16
8
Mass (approx.):
9.8 kg (21.6 lbs)
Supplied accessories
See page 3.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
0305TMMMDWSAM
© 2005 Victor Company of Japan, Limited
Download from Www.Somanuals.com. All Manuals Search And Download.
|