SAFETY PRECAUTIONS
FOR USA
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
These are general IMPORTANT SAFEGUARDS and
certain items may not apply to all appliances.
FIXED HD IP DOME CAMERA
Instructions (Installation)
VN-H257U
VN-H237U
IMPORTANT SAFEGUARDS
INFORMATION (FOR CANADA)
1. Read all of these instructions.
2. Save these instructions for later use.
RENSEIGNEMENT (POUR CANADA)
3. All warnings on the product and in the operating instructions
should be adhered to.
4. Unplug this appliance system from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil num rique de la Class A est conforme á la
norme NMB-003 du Canada.
5. Do not use attachments not recommended by the appliance
manufacturer as they may cause hazards.
6. Do not use this appliance near water - for example, near
a bathtub, washbowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool, etc.
7. Do not place this appliance on an
unstable cart, stand, or table. The
appliance may fall, causing serious
injury to a child or adult, and serious
damage to the appliance. Use only with
a cart or stand recommended by the
manufacturer, or sold with the appliance.
Wall or shelf mounting should follow the
manufacturer’s instructions, and should
use a mounting kit approved by the
Due to design modifications, data given in this instruction
book are subject to possible change without prior notice.
For Customer Use:
Enter below the Model No. which is located
on the body.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
* The VN-H237U camera is shown in the illustration.
Retain this information for future reference.
Thank you for purchasing this product.
Before operating this unit, please read the instructions carefully
to ensure the best possible performance.
Model No.
Serial No.
AVERTISSEMENT
POUR EVITER LES RISQUES D'INCENDIE OU
D'ELECTROCUTION, NE PAS EXPOSER L'APPAREIL A
L'HUMIDITE OU A LA PLUIE.
manufacturer.
The standard camera installation procedure can be found on the back side of this page.
An appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause
the appliance and cart combination to overturn.
8. Slots and openings in the cabinet and the back or bottom are
provided for ventilation, and to insure reliable operation of the
appliance and to protect it from overheating, these openings
must not be blocked or covered. The openings should never be
blocked by placing the appliance on a bed, sofa, rug, or other
similar surface. This appliance should never be placed near
or over a radiator or heat register. This appliance should not
be placed in a built-in installation such as a bookcase unless
proper ventilation is provided.
9. This appliance should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied to your home, consult your dealer or
local power company. For appliance designed to operate from
battery power, refer to the operating instructions.
10.For added protection for this product during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna
or cable system. This will prevent damage to the product due to
lightning and power-line surges.
FOR EUROPE
© 2012 JVC KENWOOD Corporation
LST1234-001D
WARNING
This is a Class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
Safety precautions
Dear Customer
The power rating is AC 24 V, 50/60 Hz/PoE (VN-H257U) or PoE (VN-H237U). Use the correct voltage.
Always use the AC 24 V power source that is insulated from the primary power supply. (VN-H257U)
A level of supplied power that exceeds the ratings may result in failures, smoke or fire. If the camera breaks
down, turn off the power and contact our service center immediately.
If a level of power that exceeds the ratings is supplied, the internal components may be damaged even if no
abnormalities are observed in the appearance and/or operation of the camera. Contact our service center
immediately to arrange for an inspection (charged separately).
This apparatus is in conformance with the valid European
directives and standards regarding electromagnetic
compatibility and electrical safety.
European representative of JVC KENWOOD Corporation is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
Sehr geehrter Kunde, sehr geehrte Kundin, dieses Gerät
stimmt mit den gültigen europäischen Richtlinien und Normen
bezüglich elektromagnetischer Verträglichkeit und electrischer
Sicherheit überein.
Die europäische Vertretung für die JVC KENWOOD
Corporation ist:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Attachments and accessories
11. Do not allow anything to rest on the power cord. Do not locate
this appliance where the cord will be abused by persons
walking on it.
12.Follow all warnings and instructions marked on the appliance.
13.Do not overload wall outlets and extension cords as this can
result in fire or electric shock.
Instructions.......................................................2
CD-ROM...........................................................1
WARRANTY CARD (For USA).........................1
SCREW (M2)....................................................2
Deutschland
14.Never push objects of any kind into this appliance through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock. Never
spill liquid of any kind on the appliance.
Information for Users on Disposal of Old Equipment
Operating Precautions
[European Union]
15.Do not attempt to service this appliance yourself as opening
or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
16.Unplug this appliance from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the appliance.
c. If the appliance has been exposed to rain or water.
d. If the appliance does not operate normally by following
the operating instructions. Adjust only those controls that
are covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the appliance to normal operation.
Storage and Operating Environment
● This camera has been designed for indoor use. It
cannot be used outdoors.
Disclaimer
This symbol indicates that the electrical and
electronic equipment should not be disposed as
general household waste at its end-of-life.
Instead, the product should be handed over to
the applicable collection point for the recycling
of electrical and electronic equipment for proper
treatment, recovery and recycling in accordance with
your national legislation.
● The motion detection feature is not a feature to prevent
theft or fire. Our company shall not be liable for any
loss or damage resulting from the use of this feature.
● Do not install the camera in the following
environments.
● We shall not be responsible for any loss or damage
caused in the event of privacy invasion as a result of
camera footage created by this product.
Doing so may result in malfunctions or failure.
• Hot or cold locations beyond ambient temperature
range (-10 °C to 50 °C).
• Locations beyond the allowable operating humidity
range (20 %RH to 90 %RH) (no condensation
allowed).
• Near equipment that emits strong magnetic fields,
such as transformers or motors.
• Near equipment that emits radio waves, such as
transceivers and mobile phones.
• Locations in which excessive dust or sand exist.
• Locations that are subject to vibration.
• Locations prone to moisture such as sides of
windows.
• Locations that may contain steam or oil, such as
kitchens.
• Locations that are subject to radiation emissions,
X-rays or corrosive gases.
• Locations where chemicals are used, such as
swimming pools.
By disposing of this product correctly, you will help
to conserve natural resources and will help prevent
Attention:
Maintenance
● Turn off the power before performing maintenance.
potential negative effects on the environment and
This symbol
human health which could otherwise be caused by
is only valid in
inappropriate waste handling of this product. For
the European
● Wipe off dirt on the dome cover with a lens-cleaning
cloth (or soft cloth). For dirt that cannot be easily
removed, wipe using a neutral detergent diluted with
water. Following that, wipe with a dry cloth. Do not use
thinner or benzene. The surface of the dome cover
may dissolve or fog up.
more information about collection point and recycling
Union.
of this product, please contact your local municipal
e. If the appliance has been dropped or the cabinet has been
damaged.
f. When the appliance exhibits a distinct change in
performance
office, your household waste disposal service or the
shop where you purchased the product. Penalties
may be applicable for incorrect disposal of this
waste, in accordance with national legislation.
- this indicates a need for service.
(Business users)
17.When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock or other hazards.
18.Upon completion of any service or repairs to this appliance,
ask the service technician to perform routine safety checks to
determine that the appliance is in safe operating condition.
If you wish to dispose of this product, please visit our web
back of the product.
Saving Energy
● If the camera is not going to be used for a long period
of time, turn off the power or the system for safety
reasons and to conserve energy.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in
accordance with applicable national legislation or other
rules in your country for the treatment of old electrical and
electronic equipment.
Others
● This camera has a built-in AGC circuit. Setting AGC
to "Mid" or "High" increases the sensitivity of a dark
image, and the screen may appear grainy. This is not
a malfunction.
FOR USA AND CANADA
● This installation should be made by a qualified service
person and should conform to all local codes.
● Use of this camera and cables connected to this
camera at locations where strong electrical or
magnetic waves are generated (e.g. near a radio, TV,
transformer, monitor, etc.) may result in images being
affected by noise interference or colors being changed.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
● When this camera is used with the white balance set to
"ATW" (Auto Tracking White Balance), the color tone
of some objects may differ slightly from the actual color
due to the principle of the automatic tracking white
balance circuit. This is not a malfunction.
● This installation shall be in accordance with the
National Electrical Code, ANSI/NFPA 70. The unit is to
be powered by a Listed Class 2 power supply or using
the PoE.
CAUTION: TO REDUCE THE RISK OF ELECTRICK
SHOCK. DO NOT REMOVE COVER
● Do not install this camera at locations where cold
air is circulated, such as near the air vent of an air
conditioner. The drastic change in temperature may
fog up the dome cover.
● The AC 24 V power supply should conform to the
following: Class 2 only (For USA), Isolated power
supply only (For Europe and other).
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
● For regions with a commercial power frequency of
50 Hz, switch to the Flickerless mode during use
under fluorescent lights (excluding inverter lighting
equipment) to prevent flickers.
● Any Mention in this manual of Alarm inputs have not
been evaluated by UL to be used for Burglar Alarm
Functionality.
The lightning flash wish arrowhead symbol, within
an equilateral triangle is intended to alert the
user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that age"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
● Do not install this camera at a location that traps heat.
This camera discharges heat from the surface of the
main unit. Do not install it at locations that may trap
heat, such as wall corners.
● When the electronic sensitivity enhancement feature
is enabled, the screen may appear grainy and more
white spots may appear because the sensitivity has
increased. However, this is not a malfunction.
● Special technique is required when installing this
product.
Please refer to your dealer for installation.
Handling Precautions
● If the power supply voltage is momentarily cut off or
reduced due to lightning or the power supply to the
air conditioner being turned on, the image may be
disrupted or noise interference may occur.
● Rating label is pasted at the bottom or top of the
camera unit.
● Do not block the vents.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Inadequate heat ventilation may cause this camera to
malfunction. Be sure not to block the vents around the
camera.
● JVC is not liable for any compensation if you drop the
camera due to insecure mounting by not following the
installation description. Pay careful attention during
installation.
● The rotation angle of this camera is increased to
enable installation at a wider variety of locations. When
the lens is at the wide-angle position, and tilted at an
angle close to +/-80 degrees, a part of the camera
may come into view on the screen depending on the
rotation angle. When this occurs, adjust the field angle
accordingly.
Copyright Protection
Information for USA
● With the exception of the user being the copyright
holder or when permission such as for duplication has
been granted by the copyright holder, permission is
required in principle to duplicate, modify or transmit
copyrighted material.
This device complies with part 15 of the FCC Rules. Changes
or modifications not approved by JVC could void the user's
authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct
the interference at his own expense.
● When mounting this product to a ceiling or wall, select
a location strong enough to support the weight of this
camera. If the location is not strong enough to support
the weight, be sure to reinforce the ceiling or wall
before installation.
● Unauthorized duplication, modification or transmission
of copyrighted material may constitute a copyright
infringement, and the user may be liable to pay
compensation for damages. When using copyrighted
material, be sure to check the license agreement or
the copyrighted material thoroughly.
● When using multicast, make use of an IGMPv2-
compliant network switch.
● The camera may drop if the mounting screws are
not tightened securely. Check that the screws are
tightened appropriately and securely.
● Some hubs/switches of products that are equipped
with intelligent features may include a broadcast/
multicast suppression function. If this function is
enabled, viewing of multicast images on this camera
may fail.
● Do not install the camera near lighting fixtures of high
temperature, such as spot lights. It might result in
failure or fires.
● When rights or rights holders are involved with regard
to the targeted subject of duplication, permission may
be required for shooting or using (processing) it. Be
sure to check the licensing conditions thoroughly.
CAUTION
● It should be noted that it may be unlawful to re-record
pre-recorded tapes, records, or discs without the
consent of the owner of copyright in the sound or video
recording, broadcast or cable program and in any
literary, dramatic musical, or artistic work embodied
therein.
● It is recommended to use shielded LAN cables for
connection with this camera. The safety and reliability
of this camera has been checked by using shielded
cables.
CHANGES OR MODIFICATIONS NOT APPROVED BY JVC
COULD VOID USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
● Use of recorded materials without first gaining the prior
consent of the author is forbidden under copyright law
except in cases of personal use.
● Under halogen lamps, light bulbs and other light
sources that emit strong infrared light, black objects
may look almost purple in the recording. It is an
inherent characteristic of this camera and not a defect.
● The latest version
Please visit V.NETWORKS web site to check the
latest firmware at
index.html
● During viewing using the Built-in Viewer, the video
and audio may appear out of sync. This is not a
malfunction (VN-H257U).
Download from Www.Somanuals.com. All Manuals Search And Download.
1
☞ Continued overleaf
2 Roughly adjust the focus.
Adjust the field angle and focus
1 Lift the focusing gear control, release the catch from position A
Turn on the power
1 Adjust the zoom ratio.
and insert it into position B to disengage the gear.
Loosen the fastening screw of the zoom adjustment ring, then
move the ring to the right and left to adjust the zoom ratio. After
completing the adjustment, tighten the setscrew.
Note
•
If you open the gear beyond position B, the gear shaft is
released from the bearing (C in the figure on the left) to prevent
it from being damaged. In this case, correctly re-insert the shaft
into bearing A (the original position).
After all connections and installations are completed,
turn on the power of the unit. When the camera is
booting, the [STATUS] indicator lights up orange. It lights
up green after booting.
Note
• Applying force to the zoom adjustment ring while adjusting the
image size may result in damage.
Moving the zoom adjustment ring beyond its adjustable range
may cause the performance of this camera to deteriorate.
VN-H257U camera
2 Rotate the lens section at the tip to roughly adjust the focus.
2
Lens section
Image Adjustment
VN-H257U camera
VN-H237U camera
Focusing ring
Adjust images by watching them on the monitor.
Knob
Knob
Note
*The illustration of the camera directly mounted on the ceiling is used.
The same procedures are performed regardless of the camera is
embedded into the ceiling or mounted on the wall with the cables
pulled out.
Catches
Catches
• Do not hold the lens section when adjusting the direction of the
camera. The lens section may be damaged if you apply force to
it. Also, exercise care not to leave your finger prints on the lens
when you rotate the lens section.
Zoom adjustment ring
Zoom adjustment ring
B
A
B
A
3 Return the catch of the focus adjustment gear B to position A
shown in the diagram, and then return the focus adjustment
gear to its original position.
Note
• Before touching the camera body, make sure you touch the metal
surface of the [MONITOR] terminal first to discharge any static
electricity from your body.
VN-H237U camera
2 Loosen the focusing ring setscrew and roughly focus the image
Otherwise, static electricity may cause the camera to malfunction.
by rotating the ring to the right or left.
3 Return the catch of the focus adjustment gear B to position A
shown in the diagram, and then return the focus adjustment
gear to its original position.
C
Focus adjustment gear
C
Focus adjustment gear
Adjust the shooting direction of the
One base
pitch
[MONITOR] terminal
camera
3 Finely adjust the focus.
Dome cover
setscrews
1 Connect a test monitor to the [MONITOR] terminal.
VN-H257U camera
1 Connect the camera to a computer, and open the Built-in Viewer.
• For details about computer settings and methods for
connecting the camera to a computer, refer to “Instructions (IP
Address Settings)”.
2 Select “Day Focus Adjust” from the “Focus” page in “Advanced
Settings”.
[STATUS] indicator
[MONITOR] selection switch
NTSC
PAL
[RESET] button
• The focus position is automatically adjusted.
• For details on focus, refer to “Instructions (Setting)” on the
supplied CD-ROM.
[MONITOR] terminal
• You can also adjust the focus after mounting the dome cover.
VN-H237U camera
1 Press the [FOCUS ASSIST] button.
• The camera enters Focus Assist mode, and [STATUS]
indicator flashes green and orange alternately.
• The image is sharpened with the opening of the aperture.
Tilt fastening
screw
2 Finely adjust the camera focus by rotating the focus adjustment
gear knob to the right or left.
Protruding part
75 Ω
termination
3 Rotate the focus adjustment gear knob for approximately one
base pitch in the direction of the arrow shown in the figure.
•
This is to correct the focus shift when mounting the dome cover.
4 Remove the protective sheet of the dome cover, and check the
camera focus by holding the dome cover over the lens.
Test monitor
•
After checking, replace the protective sheet on the dome cover.
Memo
Dome cover
protective sheet
5
Tighten the setscrew of the focus adjustment ring and fix the focus.
•
The camera has the 16:9 aspect ratio. If the test monitor has the 4:3 aspect
ratio, the camera image is converted into the 4:3 ratio and displayed.
6 Press the [FOCUS ASSIST] button.
• The Focus Assist mode will be released.
• [The STATUS] indicator lights up green.
• Set to "NTSC" when connecting to an NTSC monitor, or set to "PAL"
when connecting to a PAL monitor, then hold down the [RESET]
button for approximately three seconds to reboot. While the camera
is rebooting, the [STATUS] indicator lights up orange.
Note
• It may be difficult to acquire focus automatically when shooting
the following places.
•
If you keep pressing the [RESET] button for more than 5s, the camera
enters the Service mode. Do not press this button for more than 5s.
– Too bright places.
– Too dark places.
– Places where brightness always changes. (e.g. a light is
flickering; people are passing by in front of the camera.)
– Places where there is little contrast of brightness.
– Places where there are repeating patterns of vertical stripes.
2 Adjust the shooting direction of the camera.
Dome cover
• Before you start, remove the light-blue protection tape.
• Adjust the pan, tilt and rotation controls of the cameras to face
the lens towards the subject.
Memo
• The focus position can be manually adjusted by using the Built-
in Viewer installed on your computer connected to the camera.
(☞ “Instructions (Setting)”) Resort to this method if it is difficult
to acquire focus automatically.
•
After adjusting the field angle, tighten the tilt fastening screw to
secure the camera so that its field angle does not go out of alignment.
Note
• Moving the pan, tilt or rotation beyond the adjustment range may
damage this unit.
• As the tilt and rotation range of this unit is wide, part of this unit may
be reflected in the shooting screen depending on the field angle and
direction.
• Do not hold the lens section when adjusting the direction of pan, tilt
or rotation. The lens section may be damaged if you apply force to it.
Mount the dome cover
When you mount the dome cover, make sure that no cables are connected to the [MONITOR] terminal.
Mount the inner dome
Mount the dome cover and remove
the dome cover protective sheet
Note
Pan: ± 175°
Engage the inner dome slot with the projection, and
mount the dome by rotating it in the direction of the
arrow. Press the inner dome in until you hear the click of
the catch.
•
If you remove the dome cover again after installing it, the field angle may
shift. If the field angle has shifted, adjust the focus and the field angle again.
• Check to ensure that the dome cover is firmly mounted. The cover
may fall off if it is not mounted correctly.
Rotation: ± 100°
Tilt: ± 80°
Align the position aligning marks (two locations) on the
camera body and the dome cover, mount the dome
cover and secure the dome cover with screws.
Shooting direction mark
Catches
(two locations)
Protection tape
Pan center mark
Position aligning mark
Protruding part
Rotation center mark
Mounting
position of a
screw (supplied)
Inner
depression
Rotation
Knob (two locations)
Memo
• Rotate the lens in the pan, rotation and tilt directions ± 175°, ± 100°
and ± 80° respectively from the position aligned with the camera's
shooting direction mark, pan center mark and rotation center mark.
Be sure to hold the rotation control and adjust the rotation without
holding the lens section.
Inner dome
Dome cover protective sheet
Memo
• When you mount the camera body, align the shooting direction mark
within the shooting range.
•
Secure the dome cover using two dome cover setscrews as required.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
☞ Continued overleaf
Cables
Troubleshooting
Symptom
Images on the monitor are dark
Causes and Countermeasures
If you connect the monitor output (RCA terminal) inside the dome cover to the test
monitor while the monitor output cable on the bottom is connected to video recording
equipment or another monitor, images may be dark.
Cable type
Color
Signal name
AC 24 V
•
1Monitor output cable (Common)
2Power cable
2
3
4
1
Red
(VN-H257U)
Black
AC 24 V
•
Disconnect the monitor output cable from the video recording equipment or another
monitor. Alternatively, set the terminal of either one of the equipments to “OPEN”.
After adjusting the image, restore the original condition.
If the monitor image output is turned ON, a lower frame rate is set for network images.
If you turned the monitor image output to OFF, set the frame rate again.
Red
Brown
Orange
Yellow
Black
White
Yellow
White
Yellow
INPUT 1 (ALARM)
INPUT 2 (ALARM)
OUTPUT 1 (ALARM)
OUTPUT 2 (ALARM)
GND (ALARM)
MIC IN
GND (MIC IN)
LINE OUT
GND (LINE OUT)
•
•
•
3Alarm I/O cable
Black
Movement of network image is not
smooth
(VN-H257U)
(
☞
“Instructios (Setting)” - “Internet Explorer Setting” - “Encoding Page”)
No monitor image is output.
The external mic sound is not heard.
Lens is out of focus
The image output may be turned Off on Internet Explorer.
Check the monitor output setting.
•
•
Brown
Check the MIC connection.
Is the audio setting turned off? (☞ “Instructions (Setting)” - “Audio Page”)
4Audio cable
(VN-H257U)
Black
Is the focus adjustment gear engaged? Check the location of the catch.
● Connecting the power cable to AC 24 V source
● LAN cable
• When connecting to a switching hub:
Use a straight cable.
• When connecting to a computer:
Use a crossing cable.
Conductor
diameter (mm)
1.0 mm dia 1.6 mm dia 2.0 mm dia
or more
or more
or more
Specifications
Max cable
distance (meters)
(Reference value)
90
240
370
•
A 100-meter or less length and Category-5 or higher
*
The specifications and appearance of this unit are subject to change for purposes of improvement without prior notice.
grade STP (shielded) cable is recommended.
VN-H257U VN-H237U
1/3-inch Square-Pixel Progressive Scan CMOS (elementary color filter)
Approximately 2,120,000 pixels
Note
Note
Image sensor
• For safety reasons, turn on the power only after
confirming that all the connections are completed.
• Be sure to turn off the camera before connecting
cables.
• If you use both the AC 24 V power cable and the
PoE-based LAN cable simultaneously, the camera
may fail. Always supply power using either method.
To use an AC 24 V power supply, remove the factory-
installed tape from the power cable, connect to an AC
24 V power supply, and wrap the connector with new
insulation tape.
• The crossing cable may not be used for some
computer models. Check the LAN specifications of
the computer when you directly connect this unit to
the computer.
Effective pixels
Camera
section
1944 (H) x 1092 (V)
(50 %, AGC High, 1/30 s)
Color: 0.3 lx (typ.)
(50 %, AGC High, 1/30 s)
Color: 0.3 lx (typ.)
Minimum illuminance
of subject
Black and White : 0.03 lx (typ.)
Black and White : 0.25 lx (typ.)
● Alarm I/O cable
• A 50-meter or less length shielded cable is
recommended.
75 Ω, 1.0 Vp-p
Monitor output
NTSC or PAL (switch selectable)
Can connect to a microphone that has a
plug-in power system
•
Input
–
Audio input
Reference voltage
Impedance
DC 2.47 V(typ.)
–
–
–
2.2 kΩ (typ.)
Audio output
Line OUT (200 Ω, Max 1.9 Vp-p)
Image compression format
JPEG, H.264 High Profile, H.264 Baseline Profile, MPEG-4
1920 × 1080
1280 × 960
1280 × 720
640 × 480
640 × 360
320 × 240
Audio cable connection
Connect the audio cable for an audio device.
(VN-H257U)
Frame size
Network
output
Audio compression
formats
μ-Law (64 kbps), AD/DA 16 bits,
Fs = 8 kHz, monaural
RJ-45
Audio cable (Brown and White) (MIC IN)
: Connect to a condenser microphone that has a plug-in power
system, etc.
–
Network interface
Audio cable (Black and White) (LINE OUT) : Connect to a speaker with a built-in amp, etc.
100BASE-TX/10BASE-T/FULL/HALF/Auto-negotiation enabled
No-voltage a contact input, PNP
open collector input, low level, latch/
momentary (500 msec or longer) (1 mA
circuit current at low level, and 3.3 VDC
applied voltage at high level)
NPN open collector-output (16 VDC safe
excitation voltage, and 30 mA allowable
sink current)
Memo
• A shielded audio cable is recommended.
Alarm input
–
–
* For the location to connect the audio cable, refer to [Cabling] (☞ page 2).
Alarm output
Alarm record
16 MB
f = 3 mm to 9 mm
Alarm I/O cable connection
(VN-H257U)
Focal length
f = 2.8 to 10.5 mm
Maximum aperture ratio F1.2 (f = 3 mm) to F2.1 (f = 9 mm)
Aperture range
Zoom ratio
Standards
Communication
protocol
F1.2 (f = 2.8 mm) to F2.6 (f = 10.5 mm)
Lens
F1.2 to F360
3 x
F1.2 to F360
3.75 x
Alarm input
Connect an infrared sensor, door sensor, metal
sensor, a manual switch or other device.
• To avoid noise entering the internal circuit, enter the • An alarm output signal is an open collector output.
non-voltage contact signal in the Alarm IN terminal.
• Do not supply voltage.
• The alarm can be set to be activated during close
contact (MAKE) or during open contact (BREAK)
can be set from the menu.
Alarm output
Connect an alarm device, indicator, lighting, buzzer or
other device.
Compliant with IEEE802.3, IEEE802.3u and IEEE802.3af
TCP/IP, UDP/IP, FTP, ICMP, ARP, DHCP, SNTP, HTTP, SMTP, RTP, RTSP, IPv4,
IPv6, DSCP, HTTPS, SNMP
AC24 V 50 Hz/ 60 Hz, or PoE (DC-48 V)
AC24 V 0.5 A, or PoE 150 mA (7.2 W)
-10 °C to 50 °C (Operation)
0 °C to 40 °C (Recommended)
20 %RH to 90 %RH (without condensation)
Approx. 480 g
LAN
standards
You can configure the menu to set the alarm to
sound when contacts short circuit (MAKE) or
when the contacts are open (BREAK). (Pressure
resistance lower than 16V, 30 mA)
• This terminal has different polarities. The output
voltage at the positive terminal must always be
higher than the output voltage at the negative
terminal. Otherwise, the circuit may be damaged.
Power supply voltage
Current consumption
PoE(DC-48 V)
120 mA
Ambient temperature
General
Ambient humidity
Mass
Option (sold separately)
•
The alarm signal should last for at least 500 msec. If
the alarm signal is short, it may not be recognized.
Approx. 450 g
Ceiling mount bracket (WB-S2205)
● Input conditions
● Output conditions
• Connect non-voltage a contact or open collector
output circuit
(For details on how to set polarities, please refer to
“Instructions (Setting)”.)
• Equivalent to NPN open collector output
(For details on how to set the output logic, please
refer to “Instructions (Setting)”.)
VN-H257U/VN-H237U
• Low level terminal current below 1 mA
• High level terminal current 3.3 V
This
• Safe excitation voltage: DC16 V or lower
• Allowable surge current: 30 mA
• Momentary (100 ms to 5000 ms) output
(For details on how to set the time, please refer to
“Instructions (Setting)”.)
External dimensions (unit: mm)
Mounting hole
for a screw
46
111
camera
Sensor example (1)
DC3.3 V
VCC
Input 1 or
Input 2
Alarm device
example
This
R
OUT
camera
3.3 V 1 mA
G
DC12 V
Output 1 or
Output 2
R
IN
G
Mounting hole for a screw
(Alarm input equivalent circuit)
Sensor example (2)
Relay switch or
other devices
G
G
Hole in the ceiling (unit: mm)
OUT
Mounting hole for a screw
(Alarm output equivalent circuit)
Front of the camera
Note
G
• Connect the G terminal cable of this camera to the
GND of the alarm device.
46
* For connecting the Alarm I/O cable, refer to [Cabling] (☞ page 2).
Φ
30 (cable hole)
Pan adjustable
range
Direction cables were pulled out
7.7
10
Mounting hole for a screw
LST1234-001D
Download from Www.Somanuals.com. All Manuals Search And Download.
4
|