JVC Portable CD Player RV NB20B User Manual

POWERED WOOFER CD SYSTEM

RV-NB20B/RV-NB20W

For Customer Use:

Enter below the Model No. and Serial No.

which are located either on the rear,

bottom or side of the cabinet. Retain this

information for future reference.

INSTRUCTIONS

Model No.

Serial No.

LVT1614-001A

[J]

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user

serviceable parts inside the unit; leave all servicing to qualified

service personnel.

CAUTION:

• Do not block the ventilation openings or holes. (If the ventilation

openings or holes are blocked by a newspaper or cloth, etc., the

heat may not be able to get out.)

• Do not place any naked flame sources, such as lighted candles,

on the apparatus.

• When discarding batteries, environmental problems must be

considered and local rules or laws governing the disposal of

these batteries must be followed strictly.

• Do not expose this apparatus to rain, moisture, dripping or

splashing and that no objects filled with liquids, such as vases,

shall be placed on the apparatus.

3. CAUTION:

(For U.S.A.) Visible and/or invisible class II laser radiation when

open. Do not stare into beam.

(For Canada) Visible and/or invisible class 1M laser radiation when

open. Do not view directly with optical instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE

THE UNIT.

ATTENTION:

• Ne bloquez pas les orifices ou les trous de ventilation. (Si les

orifices ou les trous de ventilation sont bloqués par un journal un

tissu, etc., la chaleur peut ne pas être évacuée correctement de

l’appareil.)

• Ne placez aucune source de flamme nue, telle qu’une bougie, sur

l’appareil.

IMPORTANT POUR PRODUITS LASER

1. PRODUIT LASER CLASSE 1

2. ATTENTION: N’ouvrez pas le couvercle supérieur. Il n’y a aucune

pièce réparable par l’utilisateur à l’intérieur de l’appareil; confiez

toute réparation à un personnel qualifié.

3. ATTENTION:

• Lors de la mise au rebut des piles, veuillez prendre en

considération les problèmes de l’environnement et suivre

strictement les règles et les lois locales sur la mise au rebut des

piles.

• N’exposez pas cet appareil à la pluie, à l’humidité, à un

égouttement ou à des éclaboussures et ne placez pas des objets

remplis de liquide, tels qu’un vase, sur l’appareil.

(Pour les Etats-Unis) Radiation laser de classe II visibles et/ou

invisible si l’appareil est ouvert. Ne regardez pas le rayon.

(Pour le Canada) Rayonnement laser visible et/ou invisible de

classe 1M une fois ouvert. Ne pas regarder directement avec des

instruments optiques.

4. REPRODUCTION DE L’ÉTIQUETTE: ÉTIQUETTE DE

PRÉCAUTION PLACÉE À L’INTERIEUR DE L’APPAREIL.

[European Union Only]

[Union européenne seulement]

G-2

Download from Www.Somanuals.com. All Manuals Search And Download.

Thank you for purchasing the JVC Powered Woofer CD System.

Before operating this system, read this manual carefully and thoroughly to obtain the best possible performance from your system, and retain

this manual for future reference.

Features

Here are some of the things that make your system both powerful and simple to use.

„ General

• With JVC’s COMPU PLAY you can turn on the system and start playing the iPod connected to the iPod jack with a

single touch, as well as the radio and disc player. (Only when AC power is used.)

• Shoulder strap with carrying case for the iPod and carrying handle

• Active Clear Sound (ACS) circuit for enhancing sound reproduction

• Super woofer volume control that provides powerful bass

• Sound mode control—reproducing various sound fields

• Remote control unit that operates the disc, tuner, and iPod functions

• Locking mechanism for disc door

• Microphone/guitar input

„ With Quick Portable Link (QP Link) function, the system automatically switches the source to AUX when the connected auxiliary

equipment starts to play.

„ Disc playback mode includes Skip Play, Search Play, Repeat Play, Random Play, and Program Play.

„ A 45-station preset capability (30 stations in FM band and 15 stations in AM band) in addition to auto-seek and manual tuning.

„ Clock/timer functions, timer on/off with preset volume function, and sleep timer.

iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

IMPORTANT CAUTIONS

1. Where to place the system

„

• Select a place which is level, dry and neither too hot nor too cold (between 5°C and 35°C or 41°F and 95°F).

• Leave sufficient distance between the system and a TV.

• Do not use the system in a place subject to vibrations.

2. Power cord

„

• Do not handle the power cord with wet hands!

• Some power is always consumed as long as the power cord is connected to the wall outlet.

• When unplugging the system from the wall outlet, always pull the plug, not the power cord.

3. When carrying the system

„

• Remove a disc from the system.

• Disconnect all the cords from the system.

4. Malfunctions, etc.

„

• There are no user serviceable parts inside. In case of system failure, unplug the power cord and consult your dealer.

• Do not insert any foreign object into the system.

• The system is not waterproof or dust proof.

Table of contents

„„

Features............................................................................ 1

IMPORTANT CAUTIONS.............................................. 1

Index of parts and controls.................................. 2

Getting started....................................................... 3

Basic operations ................................................... 7

Listening to the radio............................................ 9

Playing back discs ................................................ 10

Listening to the iPod............................................. 13

Listening to auxiliary equipment......................... 14

Using the microphone/guitar ............................... 15

Using the timer...................................................... 15

Care and maintenance.......................................... 17

Troubleshooting .................................................... 17

Specifications........................................................ 18

Download from Www.Somanuals.com. All Manuals Search And Download.

Index of parts and controls

„„

Display window

How to open the cover

See pages in parentheses for details.

Display window

o Timer indicators (16)

ON/STANDBY button (7)

•

(timer), ON, OFF

2 Shoulder strap hooks (4)

3 AUX button (3, 14)

• Pressing this button also turns on the system.

4 SOUND button (8)

5 SUPER WOOFER VOLUME +/– control knob (8)

6 LOCK/RELEASE knob (for disc) (10)

7 Disc compartment door (10)

8 VOLUME +/– control knob (7)

9 PRESET TUNING button (9)

p FM MODE button (9)

q ACTIVE CLEAR SOUND button (8)

w iPod jack (6)

e AUX jack (6)

; SLEEP indicator (15)

a CLOCK indicator (8, 15)

s QP LINK indicator (14)

d iPod indicator (13)

f FM mode indicators (9)

• STEREO, MONO

g MP3 indicator (11)

h Repeat indicators (12)

•

, ALL, GROUP

j Main display

k PRGM (program) indicator (12)

l RANDOM indicator (12)

/ Frequency unit indicators (8, 9)

• kHz, MHz

r ACS (Active Clear Sound) indicators (8)

• ON, LEVEL

t STANDBY lamp (7)

y Remote sensor (4)

u MULTI CONTROL buttons (9 – 13)

• 4 (reverse skip), 7, x (forward skip)

i Source and play mode buttons (3, 9 – 13)

• CD 6, iPod 6, FM/AM

Pressing one of these buttons also turns on the system.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control

See pages in parentheses for details.

1 Number buttons (9, 11)

2 SLEEP button (15)

3 Multi control buttons (9, 11, 15, 16)

•

GROUP UP,

GROUP DOWN

• 4, 7, x

4 Source buttons (3, 9 – 14)

• iPod 6, CD 6, AUX, FM/AM

Pressing one of these buttons also turns on the system.

5 PLAY MODE button (12)

6 REPEAT button (12)

7 SOUND button (8)

8 ACS (Active Clear Sound) button (8)

ON/STANDBY button (7, 15, 16)

p DISPLAY button (8)

q CANCEL button (12, 15, 16)

w SET button (10, 15, 16)

e CLOCK/TIMER button (15, 16)

r FM MODE button (9)

t QP LINK button (14)

y MUTING button (8)

u VOLUME +/– button (7)

i SUPER WOOFER VOLUME +/– buttons (8)

COMPU PLAY — One Touch Operation

With One Touch Operation you can play a disc, an iPod, or turn on the radio with a single press of the play button for that function. The system

turns on and starts playing the source if it is ready.

The COMPU PLAY buttons are: On the system and remote control

iPod 6 button

CD 6 button

AUX button

FM/AM button

Note: The COMPU PLAY feature is not effective when the system is operated on batteries or car battery (DC12V).

Getting started

„„

Accessories

Check that you have all the following items, which are supplied for the system.

Power cord (1)

Remote control (1)

Shoulder strap with carrying case for the iPod (1)

iPod cable (1)

iPod stand (1)

If any of these items are missing, contact your dealer immediately.

Download from Www.Somanuals.com. All Manuals Search And Download.

Carrying the system

„ Using the carrying handles

Be sure to hold both handles when you carry the system.

If you carry the system by only one handle, because of the length

of the system, the end may drag on the ground and be damaged as a

result.

„ Using the shoulder strap

Attach the supplied shoulder strap (adjustable in length) to each

end of the system as illustrated.

Shoulder strap

(supplied)

Do not lift the system by the woofer ducts, and do not insert any

foreign objects into them.

Carrying handle

Woofer duct

iPod (not supplied)

iPod case (supplied)

Shoulder strap

To detach the shoulder strap, press in the metal fitting and unhook

it from the shaft.

Using the remote control — RM-SRVNB20A

CAUTION:

To avoid battery leakage or explosion:

„ Installing the batteries

• Remove batteries when the remote control is not in use for an

extended period of time.

• When you need to replace the batteries, replace both batteries at

the same time with new ones.

• Do not use different types of batteries together.

Point the remote control at the remote sensor on the system’s

control panel (from a distance of up to 7 m or 23 feet). If you point

the remote control from the slant direction, the distance will be

shortened.

Match the polarity (+ and –) on the batteries with the +

and – markings in the battery compartment.

• Do not expose the remote sensor to strong direct sunlight or

artificial lighting.

• Make sure there are no obstacles between the remote sensor and

the remote control.

Remote sensor

R6(SUM-3)/AA(15F)

(not supplied)

Checking the type of your iPod

This system has been designed to operate an iPod (see page 13).

If the iPod does not play correctly, please update your iPod

Software to the latest version.

• For details about updating your iPod, check on the Apple web site

<http://www.apple.com>.

Compatible iPod types:

iPod nano 1G/2G/4G

iPod mini

iPod (4th Generation) 20G/40G

iPod photo (4th Generation) 20G/30G/40G/60G

iPod video (5th Generation) 30G/60G

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

CAUTION: Make all connection before plugging the system into an AC power outlet.

„ Connecting the microphone/guitar

Rear view

(See page 15.)

(Not supplied)

„ Connecting the headphones (See page 7.)

(Not supplied)

Stereo mini plug

„ Connecting to the car battery

„ Memory backup batteries

Car adapter JVC model

CA-R120 (not supplied)

To car’s cigarette

lighter socket (DC12V)

CAUTIONS:

• Be sure to use the specified car adapter (JVC model CA-R120) to prevent

mishaps or damage resulting from different polarity design.

• For safety, stop the car before performing operations.

• Be sure to start the engine when you use the car adapter; otherwise, the car

battery will be exhausted.

Battery cover

Match the polarity (+ and –) on the batteries

with the + and – markings in the battery

compartment.

• During transport, stabilize the system in a box, etc.

• To prevent malfunctions, do not leave the system in a car for a long time.

• If the power is supplied through the car battery, the display will be blank

with the system turned off (at standby).

Unplug the AC power cord from the system to supply the power

through the car battery; otherwise, the system does not work.

“R6(SUM-3)/AA(15F)”

size batteries (not

supplied)

„ Connecting the AC power cord

Power cord

CAUTIONS:

• ONLY USE THE JVC POWER CORD PROVIDED FOR

THIS SYSTEM TO AVOID MALFUNCTION OR

DAMAGE TO THE SYSTEM.

• BE SURE TO UNPLUG THE POWER CORD FROM THE

OUTLET WHEN GOING OUT OR WHEN THE SYSTEM

IS NOT IN USE FOR AN EXTENDED PERIOD OF

TIME.

Download from Www.Somanuals.com. All Manuals Search And Download.

„ Connecting the auxiliary equipment

„ Connecting the iPod (See page 13.)

(See page 14.)

To headphones jack

To dock connector

Stereo mini plug cable (not supplied)

Auxiliary equipment (not supplied)

iPod cable

(supplied)

iPod stand

(supplied)

Disconnecting the auxiliary equipment

When disconnecting the auxiliary equipment, make sure the

system is turned off.

iPod (not supplied)

Disconnecting the iPod

• When disconnecting the iPod, make sure the

system is turned off.

• To remove the iPod cable from the iPod,

hold the buttons on the sides and pull.

Front view

To remove the batteries, remove battery

“3” first.

To remove the batteries, remove battery

“10” first.

„ Operating the system on

batteries

Notes:

• The memory backup batteries will not be

consumed as long as the power is supplied

from an AC outlet, loaded 10 batteries, or

car battery (DC12V). However, if no

power is supplied to the system, the

memory backup batteries should be

replaced with new ones approximately

every 12 months to securely maintain the

contents of the memory.

• Before replacing the memory backup

batteries, always connect the AC power

cord to the system to prevent the contents

of memory from being erased.

• When you operate the system on mains

(AC) power or on car battery (DC12V), the

power source automatically switches from

batteries to AC or DC12V. However, you

should remove the 10 batteries when

operating on AC power or car battery

(DC12V).

• When the batteries are exhausted, the

following symptoms will occur:

–Mistracking occurs during disc playback.

–“DC OFF” flashes on the display, then the

power goes off.

Battery cover

Match the polarity (+ and –) on the

batteries with the + and – markings in

the battery compartment.

If this happens, replace the batteries.

• When a power failure occurs, the time

indication disappears from the display to

save the battery power of the memory

backup batteries.

CAUTION:

To avoid battery leakage or explosion:

• Remove the 10 batteries when the system is

not in use for an extended period of time.

• When you need to replace the batteries,

replace all batteries at the same time with

new ones.

• Do not use different types of batteries

together.

• If the power is supplied through the

batteries, the display will be blank with the

system turned off (at standby).

CAUTION:

To avoid battery leakage or explosion:

• When you need to replace the batteries,

replace all batteries at the same time with

new ones. Before replacing, you need to

supply AC power to the system.

• Do not use an old battery with new ones.

• Do not use different types of batteries

together.

“R20/D(13F)” size

batteries (not supplied)

Unplug the AC power cord from the

system to supply the power through the

batteries; otherwise, the system does

not work.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic operations

„„

ON/STANDBY

SUPER WOOFER

VOLUME +/–

DISPLAY

VOLUME +/–

SOUND

SUPER WOOFER

VOLUME +/–

MUTING

STANDBY lamp

ON/STANDBY

SOUND

ACS

ACTIVE CLEAR

SOUND

ACS ON/LEVEL

indicator

VOLUME +/–

Turning the power on and off

Turning off the system

Note: The lighting condition for the STANDBY lamp and for the

Press

ON/STANDBY again.

display differs depending on the power source.

The STANDBY lamp lights up when the system is operated on AC

power.

Power source

STANDBY lamp/display

• When the AC power is used, the CLOCK indicator and the time

are displayed without backlighting.

• AC power

• The STANDBY lamp lights when power is

turned off.

• Backlighting of the display is illuminated

when power is turned on.

• Batteries or car • The STANDBY lamp does not light.

battery

(DC12V)*

• Backlighting of the display is not

illuminated.

On remote control

On system

• With the system turned off (at standby), no

indication is shown on the display.

„ Some power is always consumed even though power is turned

off (called standby mode).

* If no source is playing and no operation is done for about 4

minutes, “DC OFF” starts flashing on the display for about one

minute before the system turns off automatically (except when

the source is FM/AM or AUX, or when the microphone/guitar is

used).

„ To disconnect the system from mains (AC) supply completely,

unplug the AC power cord from the AC outlet. When you

unplug the AC power cord, the clock will be reset to

“AM12:00” if no memory backup batteries are installed.

Adjusting the volume

You can adjust the volume level between 0 and 50.

Turning on the system

Press

• When the system is operated on batteries or car battery (DC12V),

press ON/STANDBY on the system.

The STANDBY lamp goes off when the system is operated on AC

power.

ON/STANDBY.

Using the system

Turn the VOLUME +/– control clockwise to

increase the volume or turn it

counterclockwise to decrease the volume.

The display comes on and the system is ready to continue in the

mode it was in when the power was last turned off.

Using the remote control

On system

On remote control

Press VOLUME + to increase the volume or

press VOLUME – to decrease it.

When you press and hold VOLUME + or –, the volume changes

rapidly.

CAUTION:

DO NOT start playing any source without setting

the volume to minimum first, as a sudden blast of

sound can damage your hearing, speakers and/or

headphones.

„ For private listening

Connect a pair of headphones to the PHONES jack on the rear of

the system (see page 5). No sound comes out of the speakers.

Be sure to turn down the volume before connecting or putting on

the headphones.

Download from Www.Somanuals.com. All Manuals Search And Download.

Turning off the sound

temporarily

Selecting the sound mode

Sound modes can be selected to enhance the type of music being

played.

Using the remote control only

Press SOUND to select the sound mode.

Each time you press the button, the sound mode changes as

follows:

Press MUTING.

“MUTING” appears on the display.

On remote control

To restore the sound, press MUTING again or adjust the volume

(see page 7).

Adjusting the super woofer

volume

During play, you can adjust the bass level between BASS 1

(minimum) and BASS 6 (maximum).

On system

On remote control

Sound mode selection:

BEAT:

Set to this position for music with a heavy

beat, such as rock and disco music.

POP:

Set to this position for light music including

popular and vocal music.

Using the system

Turn the SUPER WOOFER VOLUME +/–

control clockwise to increase the bass level

or turn it counterclockwise to decrease the

bass level.

CLEAR:

Set to this position for crisp and clear

sounding music with transparent highs.

FLAT (no effect): Set to this position not to apply any sound

mode.

Showing the time

While the power is turned on, you can see the current time (clock)

at any time, as follows.

Using the remote control only

Press DISPLAY.

Each time you press the button, the display changes as follows:

Using the remote control

Press SUPER WOOFER VOLUME + to

increase the bass level or press SUPER

WOOFER VOLUME – to decrease it.

Current sound source (e.g. FM103.5 MHz) O (clock)

Note: To let the clock work, you need to set the clock first. (See

“Setting the clock” on page 15.)

Note: This function is not effective when the headphones are in

use.

Activating clear sound

The Active Clear Sound (ACS) circuit emphasizes high-frequency

sound without lowering the signal-noise ratio, while adjusting its

output according to the input signal level. This results in a better

balance between the high-frequency sound and the low-frequency

heavy bass.

Press ACS (active clear sound) to turn it on

or off.

When it is turned on, the ACS ON indicator lights in red.

On remote control

On system

• The ACS LEVEL indicator flashes in green according to the

input signal level.

Download from Www.Somanuals.com. All Manuals Search And Download.

Listening to the radio

„„

Number buttons

SET

FM/AM

PRESET TUNING

FM MODE

You can listen to FM and AM stations. Stations can be tuned in manually, automatically, or from preset memory storage.

„ Before listening to the radio, fully extend the FM telescopic antenna.

„ Preset Tuning (possible only after presetting stations)

Select the desired preset number using PRESET TUNING on

the system or the number buttons on the remote control. The

preset number and then the band frequency appear on the

display.

Tuning in to a station

1. Press FM/AM repeatedly to select either

„

FM or AM.

Each time you press FM/AM, the band changes between FM

and AM.

PRESET TUNING button: Each time you press the button, the

preset number increases.

The system tunes in to the last tuned station. The following

information appears on the display.

–When “Manual Tuning” or “Auto Tuning” was used to tune

in to the last tuned station (see below), the band frequency

appears.

Number buttons:

To select P-5, press 5.

To select P-15, press +10 then 5.

To select P-20, press +10 once then

press 10.

Notice: To adjust the reception condition

For FM: Adjust the FM telescopic antenna’s length, angle and

direction until the best reception is obtained.

–When “Preset Tuning” was used to tune in to the last tuned

station (see the right column), the preset number (displayed

as “P-XX” on the display) and then the band frequency

appear.

(After one second)

2. Select a station using one of the following

„

methods.

• When you tune in to an FM stereo broadcast, the STEREO

indicator lights up and you can hear stereo effect.

If an FM stereo broadcast is hard to receive or

noisy, press FM MODE. The MONO indicator lights up and

the sound becomes monaural, but the reception improves.

When you tune in to another station, the MONO indicator

goes off and stereo effect restores automatically.

For AM: Change the direction of the system to obtain the best

reception.

Placing the system near the window, for example, will

improve AM reception.

Note: AM broadcasts are monaural.

„ Manual Tuning

Press 4 or x repeatedly to move from frequency to

frequency until you find the station you want.

„ Auto Tuning

Press and hold 4 or x for one second or more.

The frequency changes automatically until a station frequency

is found.

Download from Www.Somanuals.com. All Manuals Search And Download.

4.Press the number buttons to select the

„

Presetting stations

You can preset up to 30 FM stations and 15 AM stations.

preset number you want.

• To select 5, press 5.

• To select 15, press +10 then 5.

• To select 20, press +10 once then press 10.

Note: Preset numbers may have been set to factory test

frequencies prior to shipment. This is not a malfunction.

You can preset the stations you want into memory as

follows:

5.Press SET.

„

“STORED” appears on the display and the station is stored.

Using the remote control only

6.Repeat above steps

for each

„

There is a time limit in doing the following steps. If the setting is

station you want to store into memory with

a preset number.

canceled before you finish, start again from step

To change the preset stations, repeat the same steps as

above to overwrite a new station.

1. Press FM/AM repeatedly to select either

„

FM or AM.

CAUTION:

2. Press 4 or x to tune in to a station.

3. Press SET.

„

To prevent the preset stations from being erased

because of a power failure, etc., install memory

backup batteries in the system. (See pages 5 and

6.)

Playing back discs

„„

CANCEL

Number

buttons

LOCK/RELEASE

GROUP UP

knob

CD 6

PLAY MODE

GROUP DOWN

REPEAT

This system has been designed to play back the following discs—

CD, finalized CD-R/CD-RW (recorded in audio CD format) and

CD-R/CD-RW (in MP3 format).

• This system is not compatible with the other discs such as DVD,

DVD-R, and DVD-RW.

• This system recognizes up to 999 tracks on a disc (or less

depending on the recording condition of a disc).

Setting a disc

1.Turn the LOCK/RELEASE knob

„

Notes on MP3:

counterclockwise to open the disc

compartment door.

• The system can only recognize files (tracks) with “MP3” or

“mp3” as the extensions, which can be in any combination of

upper and lower case.

• It is recommended that you record your material at a 44.1 kHz

sampling rate, using the 128 kbps data transfer rate.

• You can play back the discs containing the tracks in music CD

format or MP3 files in ISO 9660 format.

• Some MP3 tracks or discs may not be played back because of

their characteristics or recording conditions.

• MP3 discs require a longer readout time than normal discs.

2.Place a disc, with its label side up as

„

shown above.

3.Close the disc compartment door and turn

„

Hierarchy

the knob to “LOCK” position.

To remove the disc, open the disc compartment door in stop

mode.

Level 1

Level 2

Level 3

Level 4

Level 5

„ You can place an 8 cm (3-3/16") disc without an adapter.

„ If the disc cannot be read correctly (because it is scratched, for

example), “NO PLAY” or “NO DISC” appears on the display.

„ You can place a disc while listening to the other source.

Group with its play order

MP3 track with its play order

Download from Www.Somanuals.com. All Manuals Search And Download.

Skip Play

Press 4 or x to select the track you

want to play during playback.

Using the disc player—Normal

Play

• Press x once to skip to the beginning of the next track.

• Press 4 to skip to the beginning of the track being played.

Press 4 twice quickly to skip to the beginning of the previous

track.

To play a disc

1. Set a disc.

„

2. Press CD 6.

„

You can also select a track in stop mode with the same buttons.

For CD: Selected track and its playback time are shown on the

display.

For MP3:Group and track numbers (then ID3 Tag if any) are

shown on the display.

The first track of the disc starts playing.

For CDs:

Track number

Playback time

To start playback, press CD 6.

For MP3 discs:

Search Play

Press and hold 4 or x to fast forward/

reverse the disc during playback.

You can quickly find a particular passage in the track you are

listening to. During search play, you can hear the sound of approx.

one forth level.

MP3 indicator

• When playing an MP3 disc, the file name (then ID3 Tag if

any) is displayed at the beginning of each track.

• If no disc is inserted, “NO DISC” appears on the display and

the system remains in stop mode.

• The system automatically stops when the last track of the disc

has finished playing.

To locate a track directly

Using the remote control only

Press the number buttons to directly play a

track.

To stop playing the disc, press 7.

The following information for the disc is displayed.

• To directly play track 5, press 5.

For CDs:

• To directly play track 15, press +10 then 5.

• To directly play track 20, press +10 once then press 10.

Total track

number

Total playback time

(Only for MP3 discs)

• To directly play track 109, press +100 once then press 9.

• To directly play track 125, press +100, +10, +10 then 5.

To select a group (for MP3 disc)

For MP3 discs:

Total group

number*

Total track

number

Using the remote control only

Press

GROUP UP or

GROUP DOWN to

select the group you want to play during

playing the MP3 disc.

MP3 indicator

* If a disc includes more than 99 groups, “G – –” will appear on

the display.

• Press

GROUP UP to skip to the next group.

GROUP DOWN to skip to the previous group.

You can also select a group in stop mode with the same buttons.

To pause, press CD 6. The playback time flashes on the

display.

To play the group after selection, press CD 6.

To cancel pause, press the same button again. Playback

continues from the point where it was paused.

Note: Do not turn the LOCK/RELEASE knob during playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming the playing order

of the tracks

Random play

The tracks will play in no special order when you use this mode.

Using the remote control only

„ You can program up to 50 tracks in any desired order including

the same tracks.

„ You can only make a program when the system is stopped.

„ While making a program, you cannot specify a group number to

select a track.

1.Set a disc.

„

2.Press CD 6.

„

3.Press 7 to stop the disc.

„

4.Press PLAY MODE repeatedly to select

1. Set a disc.

“RANDOM.”

„

The RANDOM indicator lights up on the display.

2. Press CD 6.

„

3. Press 7 to stop the disc.

5.Press CD 6.

„

The tracks are played in random order once.

4. Press PLAY MODE repeatedly to select

“PROGRAM.”

To skip a track during playback, press x to skip to another

track in the random sequence. The 4 button works only to go

back to the beginning of the current track.

The system enters the programming mode and the PRGM

indicator lights up.

While stopped:

5. Press the number buttons to select the

„

„ To exit from random mode, press PLAY MODE repeatedly

until the RANDOM indicator goes off.

Each time you press the button, the play mode changes as

follows:

track to program.

• For detailed operations, see “To locate a track directly” on

page 11.

Example: For track 7, press 7.

Normal play = PROGRAM = RANDOM = (back to the

beginning)

Program order number

Last programmed track

Repeating tracks

You can repeat the tracks or individual track as many times as you

like.

(After 2 seconds)

Total playback time of the programmed tracks*

Using the remote control only

Press REPEAT.

Each time you press the button, repeat indicator changes as

*Total playback time will not appear while making a program

using an MP3 disc.

follows:

For CDs:

6. Repeat step

to select other tracks for

„

the program.

ALL =

ALL:

= canceled = (back to the beginning)

Repeats all the tracks on the disc.

Repeats the current track.

• To cancel the last track programmed, press CANCEL once.

•

7. Press CD 6.

„

For MP3 discs:

ALL =

beginning)

The system plays the tracks in the same order as you have

programmed them.

GROUP =

= canceled = (back to the

„ You can skip to a particular programmed track by pressing 4

or x during program play.

•

ALL:

Repeats all the tracks on the disc.

GROUP: In normal play mode, repeats all the tracks in a

group.

While stopped:

„ To confirm the programmed tracks, press 4 or x

repeatedly; the tracks making up the program will successively

be displayed in the programmed order.

In program and random play modes, group repeat

cannot be selected.

Repeats the current track.

•

• To add a track to the end of the program, simply press the

number buttons.

„ Repeat mode (except “

GROUP”) remains in effect even

when you change the play mode.

„ To delete the tracks in the program, press CANCEL

repeatedly. Each time you press the button, the last track will be

erased.

To exit from repeat mode, press REPEAT repeatedly until the

repeat indicator on the display goes off.

„ To delete the entire program, press and hold CANCEL

until “CLEAR!” appears on the display.

• Turning off the power will clear the program.

„ To exit from program mode, press PLAY MODE

repeatedly until the PRGM indicator goes off.

Each time you press the button, the play mode changes as

follows:

Normal play = PROGRAM = RANDOM = (back to the

beginning)

Note:

(For CDs) If the total playback time of the programmed tracks

exceeds 99 minutes 59 seconds, “– – : – –” will appear on the

display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Listening to the iPod

„„

iPod 6

You can operate an iPod through the system.

• Before connecting your iPod to the system, check its type and

software version (see page 4).

• Remember you cannot send any data to your iPod from the

system.

Skip Play

Press 4 or x to select the track you

want to play during playback.

• You can also operate the iPod directly even while it is connected

to the system. For details of the operation, refer to the instructions

of your iPod.

CAUTIONS:

• Press x once to skip to the beginning of the next track.

• Press 4 to skip to the beginning of the track being played.

Press 4 twice quickly to skip to the beginning of the previous

track.

• The iPod battery is charged while the system is turned on. See the

iPod instruction manual about charging times.

• Sound distortion may occur when playing back audio sources

with high recording levels. Adjusting the ipod’s equalizer to

“Flat” is recommended. For information on operating the iPod,

see the iPod instruction manual.

You can also select a track with the same buttons while the iPod is

paused.

• JVC is not responsible for any loss of or damage to iPod that

might result from the use of this product.

To start playback, press iPod 6.

• When you connect your iPod to the cable, make sure it connects

all the way in.

Search Play

• Do not carry the system with iPod connected. You might drop it

down or it might cause damages to the connector part.

• Do not touch or hit the iPod terminal pins or the connector pins

directly. It might cause damages to the connector part.

• Remove the iPod from the cable when you do not use.

Press and hold 4 or x to fast forward/

reverse the track during playback.

Playing the iPod

To play the iPod

You can quickly find a particular passage in the track you are

listening to. During search play, you can hear the sound of approx.

one forth level.

1. Set the volume level to minimum.

NOTE:

„

When iPod is selected as the source...

2. Press iPod 6.

„

– “CONNECT” appears on the display with the iPod connected.

– “NO CONNECT” scrolls on the display without the iPod

connected.

The iPod is turned on and starts playing.

iPod indicator

Turning off the iPod

Press and hold iPod 6 for about 2 seconds.

• Turning off the system* or changing iPod to another source also

turns off the iPod.

*Turning off the system may not turn off the iPod depending on

the current source.

(After 2 seconds)

3. Adjust the volume to the desired listening

„

level.

To pause, press iPod 6.

To cancel pause, press the same button again. Playback

continues from the point where it was paused.

About the battery charge of the iPod

• When the system is operated on the AC power:

The iPod battery is always charged except while FM/AM is

selected as the source.

• When the system is operated on the batteries or the car battery

(DC12V):

The iPod battery is charged only while the system is turned on

without FM/AM selected as the source.

– The iPod battery will not be charged while “DC OFF” is

flashing on the display (see page 6).

Download from Www.Somanuals.com. All Manuals Search And Download.

Listening to auxiliary equipment

„„

AUX

QP LINK

You can listen to auxiliary equipment.

First make sure that the auxiliary equipment is properly connected to the system. (See pages 5 and 6.)

Note: For operation of the auxiliary equipment, refer to its instructions.

„ How does QP Link work?

While QP Link is activated, starting playback performs the

following:

– While listening to another source,

Changes the source to AUX.

– When the power is supplied through the AC outlet and the

system is turned off,

Listening to auxiliary

equipment

1. Set the volume level to minimum.

„

2. Press AUX.

„

“AUX” appears on the display.

Turns on the system and selects AUX as the source.

NOTES:

• When the sound signal from the auxiliary equipment is too weak,

QP Link may not function correctly. In this case, turn up the

volume of the auxiliary equipment so that the system can detect

the sound signal properly.

• If you change the source from AUX with QP Link turned on, QP

Link will be deactivated temporarily. In this case, the following

reactivate QP Link:

• To listen to the auxiliary equipment, start playing the

auxiliary equipment.

Bubbles appear when the

– When the auxiliary equipment is unplugged from the AUX

jack, then plugged in again.

system detects the sound

signal.

– When the sound signal from AUX jack stops or becomes very

weak for about 30 seconds.

3. Adjust the volume to the desired listening

„

• If the system is turned off while QP Link is working, QP Link

will be deactivated temporarily. In this case, QP Link is

reactivated when the sound signal from AUX jack stops or

becomes very weak for about 30 seconds after the system is

turned off.

level.

4. Apply sound effects, if you wish.

„

• Adjust the super woofer volume to reinforce the bass sound.

• While QP Link is activated, QP Link may start working when

you just connect the auxiliary equipment to the AUX jack or

unplug it. This is not a malfunction.

Switching to AUX

automatically—QP Link

Quick Portable Link (QP Link) automatically switches the source

to AUX as the auxiliary equipment connected to the AUX jack

starts playback.

Changing the AUX jack

sensitivity

You can change the AUX jack sensitivity when QP Link

mistakenly works with detecting non-playback signals from the

auxiliary equipment, such as its switching noise.

Using the remote control only

To activate QP Link

Press QP LINK repeatedly to show “QPL

ON” on the display.

The QP LINK indicator appears on the display in the following

cases to inform you that QP Link is ready to work:

– When an auxiliary equipment is connected to the AUX jack.

– When AUX is selected as the source.

Using the remote control only

Press and hold QP LINK.

Each time you press and hold QP LINK, the sensitivity level

changes between QPL LV1 and QPL LV2.

QP LINK indicator

QPL LV1: Normally select this (initial setting).

QPL LV2: Select this when QP Link works mistakenly.

To cancel, press QP LINK repeatedly to show “QPL OFF” on the

display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the microphone/guitar

„„

3.Connect a microphone or a guitar into the

„

Microphone/guitar mixing

MIC/GUITAR INPUT jack on the rear of the

system.

Using a microphone or a guitar (not supplied), you can mix its

sound with a source sound.

4.Start a source: disc, tuner, iPod, or

„

auxiliary equipment.

1. Make sure the MIC/GUITAR LEVEL control

„

5.Adjust the VOLUME +/– control and the

on the rear of the system is properly set.

„

MIC/GUITAR LEVEL control, as you play the

microphone or the guitar.

• When using a microphone, make sure the knob is pressed in

(

• When using a guitar, make sure the knob is released ( ).

CAUTION:

DO NOT connect a bass guitar to the MIC/

GUITAR INPUT jack, as it may damage the

system.

2. Set the MIC/GUITAR LEVEL control to MIN

„

by turning it fully counterclockwise.

Using the timer

„„

ON/STANDBY

CANCEL

SET

SLEEP

CLOCK/TIMER

The timers let you control the listening functions automatically.

CAUTION:

Setting the clock

If memory backup batteries are exhausted or not

installed, and the AC power cord is plugged in

again after being disconnected, or power is

restored after a power failure, the CLOCK

indicator will flash on the display. Set the

current time (clock) again.

When the power is first supplied, the CLOCK indicator and

“AM12:00” flash on the display. Set the clock.

Note:

The clock must be correctly set for the timers to work.

Using the remote control only

Setting the sleep timer

Use the sleep timer to turn the system off after a certain number of

minutes when it is playing. By setting the sleep timer, you can fall

asleep to the music and know that your system will turn off by

itself rather than playing all night.

1. Press

ON/STANDBY.

„

2. Press CLOCK/TIMER repeatedly until the

„

CLOCK indicator lights up.

The hour digit flashes on the display.

„ You can set the sleep timer only when the system is turned on.

3. Press x or 4 to select the hour.

„

• When you press and hold the button, the hour digit changes

continuously.

Using the remote control only

1.Press SLEEP.

„

The SLEEP indicator lights up on the display.

4. Press SET to set the hour.

„

The minutes digits start flashing on the display.

SLEEP indicator

5. Press x or 4 to select the minute.

„

• When you press and hold the button, the minute digit changes

continuously.

• If you want to change the hour setting, press CANCEL.

6. Press SET to finish setting the clock.

„

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Set the length of time you want the source

5.Set the OFF time (example: PM1:30).

„

to play before shutting off.

Each time you press the button, it changes the number of

minutes shown on the display in this sequence:

10 = 20 = 30 = 60 = 90 = 120 = OFF = (back to

the beginning)

(1) Press x or 4 to select the hour, then press SET.

(2) Press x or 4 to select the minute, then press SET.

• Press and hold the button to change the time rapidly.

• If you want to change the time setting, press CANCEL.

After setting the number of minutes for the sleep timer, the

indication will stop flashing and go off.

The system is now set to turn off after the number of minutes you

set.

To confirm the sleep time:

When SLEEP is pressed, the remaining sleep time is displayed.

Wait until the display returns to the original display.

6.Press x or 4 to select the music

„

source you want to listen to, then press

SET.

Each time you press the button, the display changes as shown

below:

To cancel the sleep timer:

Press SLEEP repeatedly to select “OFF.” Turning off the system

also cancels the sleep timer.

TUNER = CD = iPod = (back to the beginning)

7.Press x or 4 to select the volume level,

„

Setting the daily timer

then press SET.

– –:

The current volume level will be used.

Once the timer has been set, it will be activated at the same time

everyday until the timer is turned off.

0 to 50: When the timer is turned on, the volume will be

automatically set to the selected level.

• While the timer is being set, the timer indicator (

) lights up.

) also lights

• After the timer has been set, the timer indicator (

up if the power is supplied through the AC outlet.

• While the timer is working, the timer indicator (

) flashes.

• The current timer setting appears for confirmation.

Using the remote control only

8.Before turning off the system, prepare the

„

1. Press

ON/STANDBY.

music source selected in step

„

TUNER: Tune in to the desired frequency (FM/AM).

2. Press CLOCK/TIMER.

„

CD:

Set a disc.

“TIMERON?” appears.

iPod:

Connect an iPod to the iPod jack.

• Press SET to activate the timer setting you have made before.

• Press CANCEL to cancel the timer.

• Go to the next step to set the timer first time (or reset the

timer).

9.Press

ON/STANDBY to turn off the

„

system.

• When the timer turns on, the volume level gradually increases

from 0 (zero) to the preset level in step

3. Press CLOCK/TIMER again, so that the

„

timer indicator ( ) and ON indicator light

up.

However, if the volume has been set to “– –”, the volume

level will be set to the last level directly.

The hour digit of the current ON time flashes on the display.

To cancel the operation, press CLOCK/TIMER until the

display returns to the original one.

To cancel the timer, press CLOCK/TIMER once, then press

CANCEL. (“TIMEROFF” appears, only when power is on.)

To reactivate (or confirm) the canceled timer, press

CLOCK/TIMER once, then press SET. (The current timer setting

appears for confirmation.)

4. Set the on-time you want the system to

„

turn on.

Notes:

• The timer cannot be set if on-time and off-time are the same.

• The timer does not work if the system is not in the standby mode

(the system needs to be in standby mode at least one minute

before the on-time).

(1) Press x or 4 to select the hour, then press SET.

(2) Press x or 4 to select the minute, then press SET.

The OFF indicator lights up.

CAUTION:

If memory backup batteries are exhausted or not

installed, and the AC power cord is disconnected

or there is a power failure, time settings will be

erased from memory. If this happens, set the

current time (clock) and perform the timer

setting again.

• Press and hold the button to change the time rapidly.

• If you want to change the time setting, press CANCEL.

Download from Www.Somanuals.com. All Manuals Search And Download.

Care and maintenance

„„

Handle your discs carefully, and they will last a long time.

Cleaning the lens

Compact discs

If the lens in the pickup is dirty, dropout, etc., could degrade sound.

Open the disc compartment door and clean the lens as shown.

• Use a blower (available at camera stores) to blow dust off the

lens.

• This system can play back the following discs:

–Audio CD

–Finalized CD-R/CD-RW recorded in audio

CD format or MP3 format

However, continued use of irregular shape

discs (heart-shape, octagonal, etc.) can damage

the system.

Blower

Lens

• Remove the disc from its case by holding it at

the edges while pressing the case’s center hole

lightly.

• Do not touch the shiny surface of the disc, or

bend the disc.

• Put the disc back in its case after use to prevent

warping.

• If there are fingerprints, etc. on the lens, gently wipe clean with a

cotton swab.

• Be careful not to scratch the surface of the disc

when placing it back in the case.

• Avoid exposure to direct sunlight, temperature

extremes, and moisture.

• A dirty disc may not play correctly. If a disc

does become dirty, wipe it with a soft cloth in a

straight line from center to edge.

CAUTION:

Moisture condensation

Moisture may condense on the lens inside the

system in the following cases:

Do not use any solvent (for example,

conventional record cleaner, spray thinner,

benzine, etc.) to clean a disc.

• After turning on heating in the room.

• In a damp room.

• If the system is brought directly from a cold to

a warm place.

Should this occur, the system may malfunction.

In this case, leave the system turned on for a few

hours until the moisture evaporates, unplug the

AC power cord, and then plug it in again.

General notes

In general, you will have the best performance by keeping your

discs and the mechanism clean.

• Store discs in their cases, and keep them in cabinets or on

shelves.

• Keep the disc compartment door closed when not in use.

Troubleshooting

• If you are having a problem with your system, check this list for a possible solution before calling for service.

• If you cannot solve the problem from the hints given here, or the system has been physically damaged, call a qualified person, such as your

dealer, for service.

„„

Symptom

Possible cause

Action

• Power does not come on.

• The power cord is not connected to an

AC outlet.

• Insert the plug into the socket.

• No sound is heard.

• Poor FM reception.

• Connections are incorrect, or loose.

• Check all connections and make

corrections. (See pages 5 and 6.)

• Disconnect the headphones.

• Headphones are connected.

• MP3 disc is recorded with “packet

writing.”

• It cannot be played. Replace the disc.

• The FM telescopic antenna is not

properly extended and positioned.

• Fully extend the FM telescopic antenna

and turn it for the best reception.

Download from Www.Somanuals.com. All Manuals Search And Download.

Symptom

• The track skips.

Possible cause

Action

• The disc is dirty or scratched.

• Clean or replace the disc.

• The disc does not play (“NO PLAY” or

“NO DISC” appears).

• The disc is upside down.

• The disc is dirty or scratched.

• Put the disc in with the label side up.

• Change the disc.

• Specific files (tracks) on an MP3 disc are

not played.

• Files other than MP3 are included in the

disc.

• They cannot be played.

• iPod is not turned on.

• Connection is not firmly made.

• The battery of the iPod is empty.

• Check the connection. (See page 6.)

• iPod does not play though “CONNECT”

appears on the display.

• Leave the iPod connected for more than

approximately ten minutes.

• iPod is not charged.

• FM/AM is selected as the source.

• The system is in a standby mode when

the system is operated on the batteries or

the car battery (DC12V).

• Select any source other than FM/AM.

• Turn on the system.

• Unable to operate the remote control.

• Operations are disabled.

• The path between the remote control and

the sensor on the system is blocked.

• The batteries have lost their charge.

• Remove the obstruction.

• Replace the batteries.

• The built-in microprocessor has

malfunctioned due to external electrical

interference.

• Unplug the system then plug it back in

after a few minutes.

• Indicators and the display do not light up

while in standby mode.

• Batteries or DC power is used to supply

the power.

Specifications

„„

Amplifier

Tuner

Output Power

FM Tuner

Tuning Range

AM Tuner

87.5 MHz – 108.0 MHz

6 W per channel, min. RMS, at 4 Ω from 150 Hz to 15

kHz with no more than 10% total harmonic distortion.

20 W per channel woofer, min. RMS into 4 Ω at 60 Hz

with no more than 10% total harmonic distortion.

Input Sensitivity/Impedance (1 kHz)

Tuning Range

Antenna

530 kHz – 1 710 kHz

FM telescopic antenna

Ferrite core antenna for AM

AUX

300 mV/47 kΩ

Switchable

200 Ω – 2 kΩ (6.3 mm dia. plug)

100 kΩ – 1 MΩ (6.3 mm dia. plug)

Speakers

Full range

Super woofer

MIC/GUITAR INPUT:

MIC

GUITAR

8 cm (3-3/16") × 2, 4 Ω

16 cm (6-5/16") × 2, 4 Ω

Output Sensitivity/Impedance (1 kHz)

General

Phones

16 Ω – 1 kΩ

Dimensions

690 mm × 239 mm × 293 mm (W/H/D)

(27-3/16" × 9-7/16" × 11-9/16")

9.2 kg (20.3 lbs) (without batteries)

10.3 kg (22.8 lbs) (with batteries)

0 – 12 mW/ch output into 32 Ω

Mass

Disc Player

Dynamic range

90 dB

Signal-to-noise ratio

Wow and Flutter

95 dB

Unmeasurable

Power Specifications

Power Requirements

AC 120 V

, 60 Hz

DC 15 V (“R20/D(13F)” batteries [10])

External DC 12 V (car battery via

optional CA-R120 car adapter)

5 V/500 mA

Power Supply to iPod

Power Consumption

AC 120 V

, 60 Hz 50 W (power on mode)

1.3 W (in standby mode)

2.5 A (power on mode)

External DC 12 V

Design and specifications are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

For U.S.A.

Download from Www.Somanuals.com. All Manuals Search And Download.

For U.S.A.

Download from Www.Somanuals.com. All Manuals Search And Download.

0806KMMMDWJEIN

Download from Www.Somanuals.com. All Manuals Search And Download.

POWERED WOOFER CD SYSTEM

CHAIN CD A WOOFER AMPLIFIE

RV-NB20B/RV-NB20W

INSTRUCTIONS

MANUEL D’INSTRUCTIONS

LVT1614-002A

[C]

Download from Www.Somanuals.com. All Manuals Search And Download.

Warnings, Cautions and Others

Mises en garde, précautions et indications diverses

(For U.S.A.)

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

The lightning flash with arrowhead symbol,

to radio or television reception, which can be determined by

within an equilateral triangle is intended to

turning the equipment off and on, the user is encouraged to try

alert the user to the presence of uninsulated

to correct the interference by one of the following measures:

“dangerous voltage” within the product’s

Reorient or relocate the receiving antenna.

enclosure that may be of sufficient magnitude

Increase the separation between the equipment and receiver.

to constitute a risk of electric shock to

Connect the equipment into an outlet on a circuit different from

persons.

that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for

help.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Caution

Changes or modifications not approved by JVC could void the

user’s authority to operate the equipment.

(For U.S.A.)

For Canada/pour le Canada

THIS DIGITAL APPARATUS DOES NOT EXCEED THE

CLASS B LIMITS FOR RADIO NOISE EMISSIONS

FROM DIGITAL APPARATUS AS SET OUT IN THE

INTERFERENCE-CAUSING EQUIPMENT STANDARD

ENTITLED “DIGITAL APPARATUS,” ICES-003 OF THE

DEPARTMENT OF COMMUNICATIONS.

CAUTION—

ON/STANDBY button!

Disconnect the mains plug to shut the power off completely (the

STANDBY lamp goes off). When installing the apparatus, ensure

CET APPAREIL NUMERIQUE RESPECTE LES

LIMITES DE BRUITS RADIOELECTRIQUES

APPLICABLES AUX APPAREILS NUMERIQUES DE

CLASSE B PRESCRITES DANS LA NORME SUR LE

MATERIEL BROUILLEUR: “APPAREILS

that the plug is easily accessible. The

ON/STANDBY button in

any position does not disconnect the mains line.

• When the unit is on standby, the STANDBY lamp lights red.

• When the unit is turned on, the STANDBY lamp goes off.

The power can be remote controlled.

NUMERIQUES”, NMB-003 EDICTEE PAR LE

MINISTRE DES COMMUNICATIONS.

^ATTENTION—Touche

ON/STANDBY!

Déconnectez la fiche secteur pour mettre l’appareil complètement

hors tension (le témoin STANDBY l s’éteint). Lors de l’installation de

l’appareil, assurez-vous que la fiche soit facilement accessible. La

touche

ON/STANDBY dans n’importe quelle position ne

déconnecte pas l’appareil du secteur.

• Quand l’appareil est en mode d’attente, le témoin STANDBY est

allumé en rouge.

• Quand l’appareil est sous tension, le témoin STANDBY s’éteint.

L’alimentation ne peut pas être commandée à distance.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose this appliance to rain or moisture.

ATTENTION

Afin d’éviter tout risque d’électrocution, d’incendie, etc.:

1. Ne pas enlever les vis ni les panneaux et ne pas ouvrir le coffret de

l’appareil.

2. Ne pas exposer l’appareil à la pluie ni à l’humidité.

G-1

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user

serviceable parts inside the unit; leave all servicing to qualified

service personnel.

CAUTION:

• Do not block the ventilation openings or holes. (If the ventilation

openings or holes are blocked by a newspaper or cloth, etc., the

heat may not be able to get out.)

• Do not place any naked flame sources, such as lighted candles,

on the apparatus.

• When discarding batteries, environmental problems must be

considered and local rules or laws governing the disposal of

these batteries must be followed strictly.

• Do not expose this apparatus to rain, moisture, dripping or

splashing and that no objects filled with liquids, such as vases,

shall be placed on the apparatus.

3. CAUTION:

(For U.S.A.) Visible and/or invisible class II laser radiation when

open. Do not stare into beam.

(For Canada) Visible and/or invisible class 1M laser radiation when

open. Do not view directly with optical instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE

THE UNIT.

ATTENTION:

• Ne bloquez pas les orifices ou les trous de ventilation. (Si les

orifices ou les trous de ventilation sont bloqués par un journal un

tissu, etc., la chaleur peut ne pas être évacuée correctement de

l’appareil.)

• Ne placez aucune source de flamme nue, telle qu’une bougie, sur

l’appareil.

IMPORTANT POUR PRODUITS LASER

1. PRODUIT LASER CLASSE 1

2. ATTENTION: N’ouvrez pas le couvercle supérieur. Il n’y a aucune

pièce réparable par l’utilisateur à l’intérieur de l’appareil; confiez

toute réparation à un personnel qualifié.

3. ATTENTION:

• Lors de la mise au rebut des piles, veuillez prendre en

considération les problèmes de l’environnement et suivre

strictement les règles et les lois locales sur la mise au rebut des

piles.

• N’exposez pas cet appareil à la pluie, à l’humidité, à un

égouttement ou à des éclaboussures et ne placez pas des objets

remplis de liquide, tels qu’un vase, sur l’appareil.

(Pour les Etats-Unis) Radiation laser de classe II visibles et/ou

invisible si l’appareil est ouvert. Ne regardez pas le rayon.

(Pour le Canada) Rayonnement laser visible et/ou invisible de

classe 1M une fois ouvert. Ne pas regarder directement avec des

instruments optiques.

4. REPRODUCTION DE L’ÉTIQUETTE: ÉTIQUETTE DE

PRÉCAUTION PLACÉE À L’INTERIEUR DE L’APPAREIL.

[European Union Only]

[Union européenne seulement]

G-2

Download from Www.Somanuals.com. All Manuals Search And Download.

Thank you for purchasing the JVC Powered Woofer CD System.

Before operating this system, read this manual carefully and thoroughly to obtain the best possible performance from your system, and retain

this manual for future reference.

Features

Here are some of the things that make your system both powerful and simple to use.

„ General

• With JVC’s COMPU PLAY you can turn on the system and start playing the iPod connected to the iPod jack with a

single touch, as well as the radio and disc player. (Only when AC power is used.)

• Shoulder strap with carrying case for the iPod and carrying handle

• Active Clear Sound (ACS) circuit for enhancing sound reproduction

• Super woofer volume control that provides powerful bass

• Sound mode control—reproducing various sound fields

• Remote control unit that operates the disc, tuner, and iPod functions

• Locking mechanism for disc door

• Microphone/guitar input

„ With Quick Portable Link (QP Link) function, the system automatically switches the source to AUX when the connected auxiliary

equipment starts to play.

„ Disc playback mode includes Skip Play, Search Play, Repeat Play, Random Play, and Program Play.

„ A 45-station preset capability (30 stations in FM band and 15 stations in AM band) in addition to auto-seek and manual tuning.

„ Clock/timer functions, timer on/off with preset volume function, and sleep timer.

iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

IMPORTANT CAUTIONS

1. Where to place the system

„

• Select a place which is level, dry and neither too hot nor too cold (between 5°C and 35°C).