COMPACT COMPONENT SYSTEM
NX-PN10
For customer use:
Enter below the Model No. and
Serial No. which are located
either on the rear, bottom or side
of the cabinet. Retain this
information for future reference.
INSTRUCTIONS
Model No.
Serial No.
LVT2011-001A
[J]
Download from Www.Somanuals.com. All Manuals Search And Download.
For Canada/pour le Canada
CAUTION
THIS DIGITAL APPARATUS DOES NOT
EXCEED THE CLASS B LIMITS FOR RADIO
NOISE EMISSIONS FROM DIGITAL
APPARATUS AS SET OUT IN THE
INTERFERENCE-CAUSING
EQUIPMENT STANDARD ENTITLED
“DIGITAL APPARATUS,” ICES-003 OF THE
DEPARTMENT OF COMMUNICATIONS.
• Do not block the ventilation openings or
holes.
(If the ventilation openings or holes are
blocked by a newspaper or cloth, etc., the
heat may not be able to get out.)
• Do not place any naked flame sources, such
as lighted candles, on the apparatus.
• When discarding batteries, environmental
problems must be considered and local rules
or laws governing the disposal of these
batteries must be followed strictly.
• Do not expose this apparatus to rain,
moisture, dripping or splashing and that no
objects filled with liquids, such as vases, shall
be placed on the apparatus.
CET APPAREIL NUMERIQUE RESPECTE
LES LIMITES DE BRUITS
RADIOELECTRIQUES APPLICABLES AUX
APPAREILS NUMIRIQUES DE CLASSE B
PRESCRITES DANS LA NORME SUR LE
MATERIEL BROUILLEUR; “APPAREILS
NUMERIQUES”, NMB-003 EDICTEE PAR LE
MINISTRE DES COMMUNICATIONS.
ATTENTION
• Ne bloquez pas les orifices ou les trous de
ventilation.
CAUTION
(Si les orifices ou les trous de ventilation sont
bloqués par un journal un tissu, etc., la
chaleur peut ne pas être évacuée
correctement de l’appareil.)
Battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
ATTENTION
• Ne placez aucune source de flamme nue,
telle qu’une bougie, sur l’appareil.
• Lors de la mise au rebut des piles, veuillez
prendre en considération les problèmes de
l’environnement et suivre strictement les
règles et les lois locales sur la mise au rebut
des piles.
Les piles ne doivent en aucun cas être
exposées à une chaleur excessive (lumière du
soleil, feu, etc.).
• N’exposez pas cet appareil à la pluie, à
l’humidité, à un égouttement ou à des
éclaboussures et ne placez pas des objets
remplis de liquide, tels qu’un vase, sur
l’appareil.
G-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1. Front: No obstructions and open spacing.
2. Sides/Top/Back: No obstructions should be placed in the areas shown by the dimensions below.
3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a
stand with a height of 10 cm (3-15/16") or more.
Attention: Aération correcte
Pour prévenir tout risque de décharge électrique ou d’incendie et éviter toute détérioration, installez
l’appareil de la manière suivante:
1. Avant: Bien dégagé de tout objet.
2. Côtés/dessus/dessous: Assurez-vous que rien ne bloque les espaces indiqués sur le schéma ci-
dessous.
3. Dessous: Posez l’appareil sur une surface plane et horizontale. Veillez à ce que sa ventilation
correcte puisse se faire en le plaçant sur un support d’au moins dix centimètres de hauteur.
Front
Face
Side
Côté
G-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction.................................................2
Precautions ................................................................2
Getting Started............................................3
Connections................................................................4
Canceling the Display Demonstration (Demo)..........6
Turning on the Power Automatically
(Motion Sensor) ..................................................6
Basic Operations .........................................7
Main Unit ...................................................................7
Remote Control ..........................................................9
Playing Back from iPod Devices..............12
Connecting iPod.......................................................13
Operations ................................................................14
Listening to FM Broadcasts.....................17
Basic Operations ......................................................17
Playing Back from Other Equipment .....19
Connecting Other Equipment...................................19
Operations ................................................................19
Setting the Clock and Timer....................20
Setting the Clock......................................................20
Using Timer .............................................................20
Troubleshooting ........................................23
Specifications.............................................24
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and
to obtain the best possible performance from the unit.
Precautions
Installation
• Install in a place which is level, dry and neither too hot nor too cold—between 5°C and 35°C (41°F
and 95°F).
• Install the unit in a location with adequate ventilation to prevent internal heat buildup inside the
unit.
DO NOT install the unit in a location near heat sources, or in a place subject to direct
sunlight, excessive dust or vibration.
• Leave sufficient distance between the unit and the TV.
• Keep the unit away from the TV to avoid interference with TV.
Power Sources
• When unplugging the unit from the wall outlet, always pull on the plug, not the AC power cord.
DO NOT handle the AC power cord with wet hands.
Internal Heat
For safety, observe the following carefully:
• Make sure there is good ventilation around the unit. Poor ventilation could overheat
and damage the unit.
• DO NOT block the ventilation openings or holes. If they are blocked by a newspaper
or cloth, etc., the heat may not be able to get out.
Others
• Should any metallic object or liquid fall into the unit, unplug the AC power cord and consult your
dealer before operating any further.
DO NOT disassemble the unit since there are no user serviceable parts inside.
• If you are not going to operate the unit for an extended period of time, unplug the AC power cord
from the wall outlet.
If anything goes wrong, unplug the AC power cord and consult your dealer.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Replacing the battery in the remote control
• In this manual, operations using the remote
control are mainly explained; however, you
can use the buttons and controls on the unit
if they have the same (or similar) name and
marks.
• In this manual, “iPod” means both iPod and
iPhone devices. When iPhone device is
especially mentioned, “iPhone” is used in
this case.
Insert the battery into the remote control by
matching the polarity (+ and –) correctly.
• If the range or effectiveness of the remote
control decreases, replace the battery.
Rear side
Lithium coin battery
(product number:
CR2025)
Supplied Accessories
After unpacking, check to be sure that you have
all the following items. The number in
parentheses indicates the quantity of each piece
supplied.
WARNINGS:
• Store the battery in a place where children
cannot reach. If a child accidentally swallows
the battery, consult a doctor immediately.
• Do not recharge, short, disassemble or heat
the battery or dispose of it in a fire. Doing any
of these things may cause the battery to give
off heat, crack, or start a fire.
• Do not leave the battery with other metallic
materials. Doing this may cause the battery to
give off heat, crack, or start a fire.
• Remote control (1)
• Lithium coin battery CR2025 (1) (The battery
has been installed when shipped from the
factory.)
• FM antenna (1)
• AC power cord (1)
• AC adaptor (1)
• When throwing away or saving the battery,
wrap it in tape and insulate; otherwise, the
battery may start to give off heat, crack, or
start a fire.
• Do not poke the battery with tweezers or
similar tools. Doing this may cause the battery
to give off heat, crack, or start a fire.
• Dispose of battery in the proper manner,
according to federal, state, and local
regulations.
If anything is missing, consult your dealer
immediately.
CAUTION:
To avoid risk of fire and to prevent damage.
• Do not use AC adaptors except the supplied
AC adaptor.
• Do not use the supplied AC adaptor for other
equipment.
Prepare the Remote Control
When you use the remote control for the first
time, pull out the insulation sheet.
CAUTION:
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent
type.
Front side
For USA-California only
This product contains a CR Coin Cell Lithium
Battery which contains Perchlorate Material—
special handling may apply.
Insulation sheet
perchlorate
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Do not connect the AC power cord until all other connections have been made.
Connecting the Antenna
FM antenna (supplied):
Extend it so that you can
obtain the best reception.
Rear side
For better FM reception
Disconnect the supplied FM antenna and
connect to an outdoor FM antenna using a 75 Ω
wire with coaxial type connector.
OutdoorFMantenna
(not supplied)
FM75ΩCOAXIAL
terminal
(on the rear panel)
NOTES:
• Make sure the FM antenna does not touch any other terminals, connecting cords or the AC power
cord. Also, keep the antenna away from metallic parts of the unit, connecting cords and the AC
power cord. This could cause poor reception.
AM band is not received with this unit.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Video Cord to View a Video/Picture from iPod
When viewing a video/picture from iPod on your TV, use a composite video cord (not supplied) to
connect the VIDEO OUT jack on the unit and the composite video input on your TV.
• After you have connected the unit, change the video input mode on your TV. For details, also refer
to the instruction manual for your TV.
Video cord (not supplied)
To video input
Rear side
Connecting the Power Cord
AC power cord
(supplied)
AC adaptor
(supplied)
To a wall outlet
Plug in the AC power cord
only after all connections
are complete.
Rear side
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Canceling the Display Demonstration (Demo)
When you connect the AC power cord for the first time, the display demonstration starts
automatically.
• When you operate the unit, the display demonstration stops temporarily. If no operation is done
for about 2 minutes, the unit starts the display demonstration again.
Button
Operation
On the unit
Hold down until “DEMO OFF” appears on the display.
• To activate again, hold down DEMO until “DEMO ON” appears on the display.
• When ECO mode is activated (P.10), the display demonstration does not function.
Turning on the Power Automatically (Motion Sensor)
When you move your hand or an object closer to Motion sensor (P.7), the unit turns on
automatically.
• iPod starts playback or an FM broadcast is received if you selected either of them last time.
• Motion Sensor works even if ECO mode is activated.
Button
Operation
On the unit
Press to activate Motion Sensor. “
• When you select Clock as the display information or the unit is on standby,
” is shown on the display (see page 10).
M.S ON” appears on the display.
“
• To deactivate, press MOTION SENSOR. “M.S OFF” appears on the display.
NOTE:
• If the AC power cord is unplugged, Motion Sensor does not work.
• Deactivate Motion Sensor in the following cases to prevent the unit from turning on automatically:
–when you do not use the unit for a long time
–when you use Timer
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Main Unit
Dock A
(P.13)
Dock B
(P.13)
Illumination panel
(P.10)
Motion
sensor
(P.6)
Display (P.8)
Remote
control
sensor
STANDBY
lamp
Operating on the Main Unit
Buttons
Operations
Turns on or off (standby) the power.
Activates or deactivates Motion Sensor (P.6).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons
Operations
Activates or deactivates the display demonstration (P.6).
Adds the powerfulness to the sound (P.11).
Stops the timer sound and restarts it 5 minutes later (P.22).
• iPod (P.14):
Press: Reverse skip/forward skip.
Hold down: Reverse search/forward search.
• FM (P.17): Tunes in to a station.
• Changes the source to iPod /iPod
(P.14).
• Starts playback and pauses for iPod (P.14).
Changes the source to FM (P.17) or
AUDIO IN (P.19).
FM
AUDIO IN
Adjusts the volume level (VOL MIN/VOL 0 to VOL MAX/VOL 30).
Display Information
Symbols
Description
Lights up when iPod is connected to dock A.
Lights up when iPod is connected to dock B.
iPod
iPod
A
B
SHUFFLE Lights up when Shuffle Play applies to both iPod and iPod (P.15).
S.TURBO Lights up when Sound Turbo is activated (P.11).
MHz
Lights up when FM frequency is indicated.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Symbols
Description
Lights up when FM stereo broadcast is received.
Lights up when FM monaural reception mode is activated.
Lights up when an FM station of sufficient signal strength is tuned in.
Lights up when FM is selected as the source.
ST
MONO
TUNED
FM
1/2/3
• Lights up when Timer is set (P.21).
•
1/2/3 icon flashes while Timer is working.
SLEEP
Lights up when Sleep Timer is activated (P.11).
Remote Control
P.10
P.11
P.20, P.22
P.14, P.20, P.22
P.14, P.17, P.18
P.15, P.17
P.14, P.17, P.18,
P.20 – 22
, P.17 – 19
, P.14
P.11
P.15, P.18 – 21
P.15
, P.11
P.11
Operating on the Remote Control
Basic operations
Buttons
Main operations
Turns on or off (standby) the power.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons
Main operations
Changes the display information.
• For iPod A/iPod B/AUDIO IN:
• When the unit is turned off:
Source name
Day of the week
Clock
Clock
Day of the week
• For FM:
Frequency
Clock
Day of the week
Changes the source to FM (P.17) or AUDIO IN (P.19).
• Changes the source to iPod /iPod
(P.14).
• Starts playback and pauses for iPod (P.14).
Adjusts the volume level (VOL MIN/VOL 0 to VOL MAX/VOL 30).
Drops the volume in a moment.
• To restore the volume, press again or adjust the volume level.
To dim the display and illumination panel—DIMMER
You can change the brightness of the display and illumination panel.
Press repeatedly.
DIM 1
DIM 2
DIM OFF
(Canceled)
DIM 1: Dims the display and illumination panel.
DIM 2: Dims the display much more than “DIM 1” and turns off the illumination panel.
• Dimmer is canceled when you turn off the unit.
To activate ECO mode
Activating ECO mode allows you to reduce power consumption by turning off the display while on
standby.
Press while the unit is on standby. “ECO ON” appears on the display for a while.
• The clock is not shown on the display when the unit is on standby.
• To cancel the mode, press ECO/DIMMER again. “ECO OFF” appears for a while then the clock
is shown on the display.
• The battery of iPod is not charged in ECO mode.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn off the unit after a certain period of time—Sleep Timer
Press repeatedly to specify the time (in minutes) as follows:
10
20
OFF
(Canceled)
30
60
90
150
120
180
• To check the time remaining before the shut-off time, press SLEEP once. If you press the button
repeatedly, you can change the shut-off time.
To emphasize the sound—Sound Turbo
You can add the powerfulness to the sound.
Press to activate Sound Turbo.
“S-TURBO” appears for a while and S.TURBO lights up on the display.
• To cancel, press SOUND TURBO again. “OFF” appears on the display.
To adjust the tone
You can adjust the bass and treble levels.
Select the item you want to adjust.
BASS
TREBLE
1
2
Canceled
Adjust the bass or treble level (–5 to +5).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back from iPod Devices
You can connect 2 iPod devices to the unit and enjoy sound and video from them.
Compatible iPod Models:
iPod model
Audio
Video
—
√
√
√
√
√
√
√
√
√
√
√
√
√
√
iPod nano 1GB/2GB/4GB
iPod nano (2nd Generation) 2GB/4GB/8GB
iPod nano (3rd Generation) 4GB/8GB
iPod nano (4th Generation) 8GB/16GB
iPod mini 4GB
—
√
√
—
—
—
iPod mini (2nd Generation) 4GB/ 6GB
iPod (4th Generation) 20GB/40GB
iPod photo (4th Generation) 20GB/30GB/40GB/60GB
iPod video (5th Generation) 30GB/60GB/80GB
iPod classic 80GB/120GB/160GB
*
√
√
√
√
√
√
√
iPod touch 8GB/16GB/32GB
iPod touch (2nd Generation) 8GB/16GB/32GB
iPhone 4GB/8GB/16GB
iPhone (3G) 4GB/8GB/16GB
* Only for still picture.
If iPod does not play correctly, update iPod software to the latest version.
• For details about updating iPod, check on the Apple web site <http://www.apple.com>.
• JVC does not assure the compatibility of iPod released after April 2009 with this unit.
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
• iPhone is a trademark of Apple Inc.
• “Made for iPod” means that an electronic accessory has been designed to connect
specifically to iPod and has been certified by the developer to meet Apple performance
standards.
• “Works with iPhone” means that an electronic accessory has been designed to connect
specifically to iPhone and has been certified by the developer to meet Apple performance
standards.
• Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting iPod
Connect iPod to dock A or B on the unit.
You can have 2 iPod devices connected at the same time.
• Make sure the unit is on standby when you connect iPod.
Dock adapter (supplied with iPod
or sold separately)
Dock A
Dock B
To detach the dock adapter from the dock:
Pull up the dock adapter with your fingernail or a sharp-pointed tool using the slot.
• Be careful not to injure your fingertips or damage the terminal of the dock.
slot
NOTES:
• Be careful not to damage the terminal on the dock when connecting/disconnecting iPod.
• Close the cover of the dock when you do not connect iPod to the unit.
About the battery charge of iPod
The battery of iPod is always charged through the unit except when the unit is in ECO mode (see
page 10).
• When 2 iPod devices are connected, both batteries are charged at the same time.
• For details of the battery charging, see the instruction manual for iPod.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
For details, also refer to the instruction manual for iPod.
NOTES:
• Before viewing a video/picture from iPod on your TV, make the appropriate video setting on
iPod. For details of the setting, see the instruction manual for iPod.
• For iPhone and iPod touch
Operate iPhone or iPod touch itself in the following cases:
–when operating the home button
–when selecting application icons on the home screen
–when dragging the slider
Buttons
Control of
Operations
On the
remote
iPod
On the unit
Press:
–Selects iPod /iPod
playback.
as the source and starts
38, 3, or
8
–Starts playback/pauses.
Hold down*1: Puts iPod in sleep mode.
Press: Forward skip
Hold down: Forward search
x
Press: Reverse skip/Return to the beginning of the
current track.
Hold down: Reverse search
4
Goes back to the previous menu/screen.
—
—
MENU*2
Selects an item on the menu/screen.
–Press: Selects an item.
–Hold down: Scrolls through a list. To stop
scrolling, press either one of the buttons.
• For iPhone and iPod touch: The buttons work
after starting “Music” or “Videos” by tapping
the corresponding application icon on the home
screen of iPhone and iPod touch.
Click
wheel*2
• For iPod devices other than above: The buttons
work in the same way as operating the click
wheel of iPod counterclockwise/clockwise.
*1
*2
Not available for iPhone and iPod touch.
Not equipped with iPhone and iPod touch.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons
Control of
iPod
Operations
On the
remote
On the unit
Confirms an item on the menu/screen.
Center
button*
—
Press: Applies Shuffle Play to iPod or iPod
selected as the source.
Select the desired shuffle mode.
“SHUFFLE” appears for a while.
• The shuffle icon lights up on the display of iPod.
• To cancel, press again until the shuffle icon
disappears.
Hold down: Applies Shuffle Play to both iPod
and iPod if connected.
—
—
Select the desired shuffle mode.
“SHUFFLE” appears for a while and
SHUFFLE lights up on the display.
• The shuffle icon lights up on the display of both
iPod devices.
• To cancel, press again until the shuffle icon
disappears.
Applies Repeat Play to iPod selected as the
source.
Select the desired repeat mode.
“REPEAT” appears on the display for a while.
• The repeat icon lights up on the display/screen
of iPod.
—
—
• To cancel, press again until the repeat icon
disappears.
* Not equipped with iPhone and iPod touch.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES:
• JVC is not responsible for any loss of or damage to iPod that might result from the use of
this product.
• Do not touch or hit the terminals of the dock and of iPod. It might cause damage to these terminals.
• When you connect iPod to the dock, make sure the terminal on the dock is fully inserted into iPod.
• Always set the volume to the minimum level when connecting or disconnecting iPod.
• Do not carry the unit with iPod connected. You might drop it down or it might cause damage to
the connector part.
• Sound distortion may occur when playing back audio sources with a high recording level. When
distortion occurs, it is recommended to turn off the equalizer of iPod. For information on operating
iPod, see the instruction manual for iPod.
• Turn off the unit when disconnecting iPod.
• Remove iPod from the dock when you do not use it.
• When you cannot operate iPod connected through the unit or using the remote control, operate
iPod itself.
• After connecting iPod, wait until the unit is ready for operation (about 3 seconds).
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to FM Broadcasts
Basic Operations
Buttons
On the unit On the remote
Operations
Selects FM as the source.
FM
AUDIO IN
When an FM program is broadcasted in stereo, ST (stereo)
lights up on the display (only when the reception is good).
Press: Changes the frequency.
Hold down and release: The unit starts searching for stations
and stops when a station of sufficient signal strength is found.
• To stop searching, press again.
Tunes in to a preset station: Press repeatedly to select a preset
station number. (For presetting stations, see page 18.)
—
—
Changes the FM reception mode: When an FM stereo
broadcast is hard to receive or noisy, press to improve
reception. MONO (monaural) lights up on the display.
Reception will improve though the stereo effect is lost.
• To restore the stereo effect, press again.
AM band is not received with this unit.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting Stations
You can preset 30 FM stations.
Select FM as the source.
1
2
Tune in to the station you want to preset.
• You can also store the monaural reception mode for FM preset stations if
selected.
Activate the preset number entry mode.
“SET” flashes on the display for a few seconds.
• Complete the following operations while the indication is flashing.
3
4
Select a preset number for the station you want to store.
Store the station.
5
“STORED” appears on the display for a while.
NOTES:
• When you unplug the AC power cord or if a power failure occurs, the preset stations will be erased
in a few days.
• If you store a new station onto an occupied preset number, the station previously stored on that
number will be erased.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back from Other Equipment
Connecting Other Equipment
By using a stereo mini plug cord (not supplied), you can connect other equipment with analog audio
output jacks, such as a portable audio player, etc.
To headphones or
audio out
Stereo mini plug cord
(not supplied)
Portable
audio player
Rear side
• Refer to the instruction manual supplied with the equipment.
NOTE:
Make sure the unit is on standby when connecting or disconnecting other equipment.
Operations
To Listen to Other Equipment
Select AUDIO IN as the source.
FM
AUDIO IN
1
2
Start playing the equipment.
To Adjust the Sound Input Level from the Equipment
You can adjust the sound input level from the connected equipment if the incoming signal is too
weak or too strong.
Select AUDIO IN as the source.
1
Hold down to adjust the sound input level.
LEVEL 1
LEVEL 2
LEVEL 3
2
LEVEL 1: Ordinary input level.
LEVEL 2: Increases the input level.
LEVEL 3: Increases the input level more than “LEVEL 2.”
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Clock and Timer
Setting the Clock
Set the built-in clock before using Timer.
• You can set the clock when the unit is turned on or on standby.
Activate the clock setting mode.
“ADJCLOCK” appears then the hour digit of the time indication flashes on
the display.
• If you have already set the clock before, press the button twice to activate the
1
2
clock setting mode.
TIMER 1/TIMER 2/TIMER 3*
Clock setting
See “Using
Timer”.
*
Canceled
1 Set the hour while the hour digits of the time indication flashes on the
display.
2 Set the minute while the minute digits of the time indication flashes on the
display.
3 Select the day of the week.
SUN DAY
(Sunday)
MON DAY
(Monday)
TUE DAY
(Tuesday)
WED DAY
(Wednesday)
THU DAY
(Thursday)
FRI DAY
(Friday)
SAT DAY
(Saturday)
Back to the beginning
“CLOCK OK” appears and the built-in clock starts working.
• To exit from the clock setting, press CLOCK/TIMER as required.
• To correct a misentry during the process, press MENU/CANCEL. You can return to the previous
step.
• If a power failure occurs, the clock loses the setting and is reset to “AM12:00.” You need to adjust
the clock again.
Using Timer
Using Timer, you can wake up with music, etc.
• Deactivate Motion Sensor when you use Timer (P.6) .
• When using iPod or other equipment as the playback source, connect it to the unit beforehand.
(P.13, P.19)
• You can set Timer when the unit is turned on or on standby.
• The unit is turned off automatically 2 hours after it is turned on by Timer.
Activate the timer setting mode.
1
“TIMER 1,” “TIMER 2” or “TIMER 3” appears on the display.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Select Timer you want to set.
TIMER 1
TIMER 2
TIMER 3
2
3
Select Timer type.
WEEKLY
ONCE
WEEKLY: See step 4 below.
ONCE: Timer works once on a selected day of the week.
Select the desired day of the week.
• When “WEEKLY” is selected in step 3:
SUN DAY
THU DAY
MON-SAT
MON DAY
FRI DAY
WED DAY
MON-FRI
TUE DAY
SAT DAY
EVERYDAY
Back to the beginning
SUN DAY to SAT DAY: Timer works every week on the selected day.
MON-FRI: Timer works from Monday to Friday every week.
MON-SAT: Timer works from Monday to Saturday every week.
EVERYDAY: Timer works everyday.
4
• When “ONCE” is selected in step 3:
SUN DAY
MON DAY
TUE DAY
WED DAY
THU DAY
FRI DAY
SAT DAY
Back to the beginning
1 Adjust the hour then the minute for the on-time.
2 Select the playback source—“iPod A,” “iPod B,” “FM” or “AUDIO IN.”
• When “FM” is selected, select the preset number of the station you want to
listen to.
When you select “FM – –” the preset station you last tuned in is set. (See
5
6
“Listening to FM Broadcasts” on page 17.)
3 Select the volume level.
“SET OK” appears followed by the setting information, then the
and the timer number indicator (1/2/3) light up on the display.
icon
Turn off the unit (on standby).
• To exit from Timer setting, press CLOCK/TIMER as required.
• To correct a misentry during the process, press MENU/CANCEL. You can return to the previous
step.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
To Cancel Timer
Select Timer you want to cancel.
TIMER 1
TIMER 2
TIMER 3
1
“CANCEL” flashes on the display.
The icon and the timer number indicator (1/2/3) disappear.
2
NOTE:
The settings you have made are memorized though you cancel Timer.
To Turn off the Timer Sound briefly—Snooze
Using Snooze, you can have the timer sound stop and restart it 5 minutes later.
Set Timer following the steps 1 to 6 on pages 20 and 21.
1
When the timer sound starts, press SNOOZE. The unit turns off for 5 minutes
to stop the timer sound. Timer remains activated.
• “SNOOZE” flashes on the display while the unit turns off.
5 minutes later, the unit turns on and the timer sound restarts automatically.
2
• To stop the timer sound again, press SNOOZE.
• After stopping the timer sound 10 times by pressing SNOOZE, Snooze is
canceled.
• When the timer sound starts:
–If you do not press SNOOZE within 3 minutes after the timer sound starts, Snooze does not work.
–When you turn off the unit by pressing
, Snooze does not work.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you have a problem with your unit, check this list for a possible solution before calling for service.
General
iPod Operations
Power does not come on.
The power plug is not inserted securely. Plug
it in securely (P.5).
iPod doesn’t play though iPod /iPod
lights up on the display.
The battery is empty. Leave it connected for
more than 10 minutes.
Power turns on even though you turned
off.
The battery of iPod cannot be charged
through the unit.
Motion Sensor is activated (P.6).
The unit is in ECO mode. Cancel the mode
(P.10, P.13).
Adjustments or settings are suddenly
canceled before you finish.
There is a time limit. Repeat the procedure
again.
Radio Operations
Hard to listen to broadcasts because of
noise.
Operations are disabled.
The built-in microprocessor may
malfunction due to external electrical
interference. Unplug the AC power cord and
then plug it back in.
The FM antenna connection is incorrect or
loose (P.4).
The FM antenna is not properly extended
and positioned (P.4).
Cannot view a video/picture from iPod
on the TV.
Timer Operations
Timer does not work.
Connect a composite video cord securely to
your TV (P.5).
Change the video input mode on your TV.
For details, refer to the instruction manual
for your TV.
Timer starts working only when the unit is
turned off (standby).
A power failure may have occurred. Set the
clock first, then Timer again (P.20, P.21).
Unable to operate the unit from the
remote control.
Timer sound starts working again.
Snooze is activated (P.22).
The path between the remote control and the
remote sensor on the unit is blocked.
Point it at the remote sensor on the front
panel.
Signals cannot reach the remote sensor.
Move closer to the unit.
Snooze does not work.
If you do not press SNOOZE within 3
minutes after the timer sound starts, Snooze
does not work (P.22).
The batteries are exhausted.
Pull out the insulation sheet (P.3).
The unit is suddenly turned off.
The unit is turned off automatically 2 hours
after it is turned on by Timer (P.20).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Accessories
Main Unit
See page 3.
Dimensions (W/H/D):
326 mm × 135 mm × 130 mm
(12-7/8 inches × 5-3/8 inches × 5-1/8 inches)
Mass:
Amplifier
Output Power
10 W (5W+5W) at 8 Ω (10%THD)
Approx. 1.6 kg (3.6 lbs)
Terminals
AUDIO IN
Speaker Specifications
Type:
Full range bass-reflex type
Speakers:
7 cm (2-13/16 inches) cone × 2
Impedance:
Input Sensitivity/Impedance (1 kHz):
LEVEL 1: 500 mV/47 kΩ
LEVEL 2: 315 mV/47 kΩ
LEVEL 3: 125 mV/47 kΩ
Dock A and B for iPod/iPhone
Compatible iPod/iPhone models:
See page 12.
Output power (each iPod dock):
DC 5 V
VIDEO OUT (For iPod/iPhone)
Composite
8 Ω
Power Specifications
Power Source:
500 mA
DC 10.7 V
3 A (EXTERNAL DC IN)
AC Adaptor (AA-R1001)
INPUT:
AC 110 – 240 V , 50/60 Hz 1A
OUTPUT:
Tuner
FM tuning range:
87.5 MHz – 108.0 MHz
(100 kHz channel space)
DC10.7 V
3 A
Power Consumption:
18 W (power on mode)
1.5 W or less (in Standby mode)
0.8 W or less (in ECO mode)
10 W (in Standby mode, with two iPod devices
connected.)
Design and specifications are subject to change
without notice.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not attempt to service the product yourself
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
© 2009 Victor Company of Japan, Limited
0409YAMMDWBET
Download from Www.Somanuals.com. All Manuals Search And Download.
|