JVC Home Theater System SP PWC3 User Manual

DVD DIGITAL CINEMA SYSTEM

TH-C3

Consists of XV-THC3, SP-PWC3, SP-THC3F, SP-THC3C and SP-THC3S

INSTRUCTIONS

GVT0150-003A

[B]

Download from Www.Somanuals.com. All Manuals Search And Download.

Warnings, Cautions and Others

Caution: Proper Ventilation

To avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surface. The minimal clearances are

shown below:

Wall or obstructions

XV-THC3

Wall or

XV-THC3

8 cm

obstructions

Front

3 cm

10 cm

DISC

obstructions

15 cm

Wall or obstructions

SP-PWC3

Wall or

obstructions

20 cm

SP-PWC3

Front

15 cm

obstructions

SAFETY INSTRUCTIONS

“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be

taken if you are to obtain the best results and safety is to be assured.

Do read the operating instructions before you attempt to use the equipment.

Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are

properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing

connections.

Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

Do be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way — switch off,

withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has

a standby mode.

Switch off using the switch on the equipment and make sure that your family know how to do this.

Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to

watch television whilst driving.

DON’T listen to headphones at high volume as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.

Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved

stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

— NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case — this could result in a fatal

electrical shock.;

— NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

E43486-340B

G-2

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of contents

Introduction .....................................2

Notes on handling .................................................................2

Supplied accessories ............................................................2

Playback ........................................17

Basic playback ....................................................................17

One Touch Replay ...............................................................19

Fast-forward/fast-reverse search ........................................19

Skip to the beginning of a desired selection .......................19

Locating a desired title/group using number buttons .........20

Playing back a bonus group ................................................20

Selecting the desired title/playlist from the control display .20

About discs .....................................3

Playable disc types ...............................................................3

Notes on file types ................................................................3

Description of parts and controls ...4

Advanced operations ....................21

Using the surround mode ...................................................21

Using the on-screen bar .....................................................22

Playing from a specified position on a disc .........................24

Using the file control display ..............................................25

Resume Playback ...............................................................26

Selecting a view angle .........................................................26

Selecting the subtitle ..........................................................26

Selecting the audio .............................................................27

Special picture playback .....................................................27

Program Playback ...............................................................29

Random Playback ...............................................................29

Repeat Playback .................................................................30

Tray lock .............................................................................31

Sound settings ....................................................................31

Connections ....................................7

Connecting the FM and AM (MW) antennas .........................7

Connecting the satellite (front, center, surround) speakers ..... 8

Speaker layout ......................................................................9

Connecting a TV ....................................................................9

Connecting the powered subwoofer ....................................10

Connecting to an analog component ...................................10

Connecting to a digital component .....................................10

Connecting the power cord .................................................10

Operating external components with

the remote control ........................11

Operating the TV .................................................................11

Operating the VCR ..............................................................12

Basic operations ...........................13

Turning the system on/off ...................................................13

Selecting the source to play ................................................14

Adjusting the volume [VOLUME] ........................................14

Listening with headphones (not supplied) ..........................14

Turning off the sound temporarily [MUTING] .....................14

Adjusting the brightness of the indications [DIMMER] .......14

Sleep Timer [SLEEP] ...........................................................15

Adjusting the output level of the subwoofer and speakers ..15

Adjusting the treble sound [TREBLE] ..................................15

Adjusting the bass sound [BASS] .......................................15

Changing the scan mode ....................................................15

Optimizing the speaker settings [Smart Surround Setup] ...16

Setting DVD preferences ..............32

Using the setup menus .......................................................32

Menu description ................................................................32

Tuner operations ...........................35

Manual tuning .....................................................................35

Preset tuning ......................................................................35

Selecting the FM reception mode ........................................36

Reducing the noise of AM (MW) broadcast ........................36

Using the RDS (Radio Data System) when receiving FM

stations ...............................................................................36

References ....................................39

Maintenance .......................................................................39

Troubleshooting ..................................................................39

Specifications .....................................................................40

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

7 Safety precautions

Notes on handling

7 Important cautions

Avoid moisture, water and dust

Do not place the system in moist or dusty places.

Avoid high temperatures

Do not expose the system to direct sunlight and do not place it near

a heating device.

Installation of the system

• Select a place which is level, dry and neither too hot nor too cold;

between 5°C and 35°C.

When you are away

When away on travel or for other reasons for an extended period of

time, disconnect the power cord plugs from the wall outlet.

• Leave sufficient distance between the system and the TV.

• Do not use the system in a place subject to vibration.

Power cord

Do not block the vents

Blocking the vents may damage the system.

• Do not handle the power cord with wet hands!

• A small amount of power is always consumed while the power

cord is connected to the wall outlet (center unit only).

• When unplugging the power cord from the wall outlet, always

pull on the plug, not the power cord.

Care of the cabinet

When cleaning the system, use a soft cloth and follow the relevant

instructions on the use of chemically-coated cloths. Do not use

benzene, thinner or other organic solvents including disinfectants.

These may cause deformation or discoloring.

To prevent malfunctions of the system

• There are no user-serviceable parts inside. If anything goes

wrong, unplug the power cord and consult your dealer.

• Do not insert any metallic object into the system.

• Do not use any non-standard shape disc (like a heart, flower or

credit card, etc.) available on the market, because it may damage

the system.

If water gets inside the system

Turn the system off and disconnect the power cord plug from the

wall outlet, then call the store where you made your purchase.

Using the system in this condition may cause fire or electrical

shock.

• Do not use a disc with tape, stickers, or paste on it, because it

may damage the system.

Label sticker

Supplied accessories

Check to be sure you have all of the supplied accessories.

The number in parentheses is the quantity of the pieces supplied.

If anything is missing, contact your dealer immediately.

Sticker

Paste

• Remote control (1)

• Batteries (2)

• FM antenna (1)

• AM loop antenna (1)

• Power cord (1)

• System cord (1)

• Core filter (1)

Note about copyright laws

Check the copyright laws in your country before recording from the

discs. Recording of copyrighted material may infringe copyright

laws.

Note about copyguard system

The discs are protected by copyguard system. When you connect

the system to your VCR directly, the copyguard system activates

and the picture may not be played back correctly.

Download from Www.Somanuals.com. All Manuals Search And Download.

About discs

If a DVD with an improper Region Code number is loaded,

“REGION CODE ERROR!” appears on the TV screen and

playback cannot start.

Playable disc types

This system has been designed to play back the following discs:

Notes on DVD-R, DVD-RW and DVD-RAM

DVD VIDEO

DVD AUDIO

• This system can also play finalized DVD-Rs or DVD-RWs

recorded in DVD VIDEO format and DVD-RWs or DVD-RAMs

recorded in DVD VR format.

• This system can also play DVD-Rs or DVD-RWs if MP3, WMA,

and JPEG files are recorded on them with UDF Bridge format.

This system does not support “multi-border” discs.

VCD/SVCD

Audio CD

Notes on CD-R and CD-RW

• This system can also play CD-Rs or CD-RWs if MP3, WMA and

JPEG files are recorded on them with ISO 9660 format.

• This system supports “multi-session” discs (up to 20 sessions).

• This system cannot play “packet write” discs.

• DVD Logo is a trademark of DVD Format/Logo Licensing

Corporation.

Some discs may not be played back because of their disc

characteristics, recording conditions, or damage or stain on them.

• The Non-DVD side of a “DualDisc” does not comply with the

“Compact Disc Digital Audio” standard. Therefore, the use of

Non-DVD side of a DualDisc on this product may not be

recommended.

Unplayable discs:

SACD, CD-I (CD-I Ready), Photo CD, etc.

Playing back these discs will generate noise and damage the

speakers.

• This system accommodates the PAL system, and also can play

discs recorded with NTSC system. Note that an NTSC video

signal on a disc is converted to the PAL60 signal and output.

• On some DVD VIDEOs, DVD AUDIOs, VCDs or SVCDs, their

actual operation may be different from what is explained in this

manual. This is due to the disc programming and disc structure,

not a malfunction of this system.

Notes on file types

For all playable files

• The system can only recognize and play files with one of the

following extensions, which can be in any combination of upper

and lower case;

• Before playing back discs, read their instructions or cautions

carefully.

Region code of DVD VIDEO

MP3:

WMA: “.WMA” , “.wma”

“.MP3”, “.mp3”

This system can play back DVD VIDEO discs whose Region Code

numbers include the system’s Region Code, which is indicated on

the rear panel.

JPEG: “.JPG”, “.JPEG”, “.jpg”, “.jpeg”

• The system recognizes up to 150 tracks (files) per group, 99

groups per disc, and the total number of the tracks (files) that the

system can play is 4000.

Example of playable DVD:

• Some files may not be played back normally because of their disc

characteristics or recording conditions.

2 3

4 5

ALL

2 5

For MP3/WMA files

• The system supports MP3/WMA files recorded with a bit rate of

32 – 320 kbps and a sampling frequency of 16 kHz, 22.05 kHz,

24 kHz*, 32 kHz, 44.1 kHz, or 48 kHz.

• If the tag information (album name, artist, and track title, etc.) is

recorded on a disc, it appears in the file control display on the TV

screen. (A pg. 25)

• We recommend to record each piece of material (song) at a

sample rate of 44.1 kHz and at a data transfer rate of

128 (96*) kbps.

* For WMA only

For JPEG files

• We recommend to record a file at 640 x 480 resolution.

• This system can only play baseline JPEG files.

This product incorporates copyright protection technology

that is protected by U.S. patents and other intellectual

property rights. Use of this copyright protection technology

must be authorized by Macrovision, and is intended for

home and other limited viewing uses only unless otherwise

authorized by Macrovision. Reverse engineering or

disassembly is prohibited.

“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH

DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE

WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE

DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625

PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS

RECOMMENDED THAT THE USER SWITCH THE

CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT.

IF THERE ARE QUESTIONS REGARDING OUR TV SET

COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD

PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE

CENTER.”

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of parts and controls

Front panel (center unit)

Display window

pg. 22

pg. 18

pg. 19

pg. 22

pg. 35 pg. 35

FM AM

P LPCM SURR

MHz

kHz

WMAMP3

RESUME

PROGRESSIVE B.S.P. CHAP. TRK PG PL BONUS ST MONO RDS TA NEWS INFO PRG RND

DISC ALL

pg. 29

pg. 30

pg. 18

pg. 35

pg. 18

pg. 26

pg. 28

pg. 18

pg. 36

pg. 17

pg. 18 pg. 20

pg. 15

pg. 19

pg. 14

pg. 17

TUNING

SOURCE

Disc tray (inside): pg. 17

pg. 14

DISC 1

DISC 2

DISC 3

DISC 4

DISC 5

pg. 13

pg. 14

pg. 17

pg. 13

Remote sensor:

pg. 6

Rear panel (center unit)

pg. 7

pg. 10

AUX IN

pg. 9

pg. 10

pg. 9

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of parts and controls

Powered subwoofer

SP-PWC3

pg. 10

pg. 8

CAUTION:

S_ΩPEAKER_ΩIMPEDANCE

POWER ON lamp:

pg. 13

Power cord:

Front

Rear

pg. 10

NOTE

• For safety reasons, always ensure that there is sufficient space behind the powered subwoofer.

* Do not block the ventilation openings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of parts and controls

Remote control

Putting batteries in the remote control

pg. 11

TV/VIDEO

FAUDIO

VCR

pg. 13

pg. 11

DISC 1

DISC 3

DVD

DISC 2

DISC 4

FM/AM

pg. 12

pg. 14

pg. 17

pg. 14

DISC 5

MUTING

R6P (SUM-3)/AA (15F)

type dry-cell batteries

(supplied)

AUX TV SOUND

TV VOL

CHANNEL AUDIO VOL

pg. 14

AUDIO

pg. 11 – 38

pg. 11

VCR

pg. 17

pg. 19, 35

TUNING

SLOW

MEMORY

FM MODE

SLOW

pg. 17,

pg. 20,

pg. 19, 27

pg. 17, 36

pg. 20, 24

TOP MENU/PG

MENU/PL

If the range or effectiveness of the remote control decreases,

replace both batteries.

pg. 15,

ENTER

CAUTION

• Do not expose batteries to heat or flame.

SCREEN

REC

pg. 12,

pg. 22

TITLE/GROUP

AUDIO

pg. 20

Operating the system from the remote

control

Aim the remote control directly to the front panel of the center unit.

• Do not hide the remote sensor.

pg. 27

pg. 26

Number

buttons:

pg. 19

SUBTITLE

ANGLE

PAGE

100+

TV RETURN

pg. 26

pg. 29

REPEAT PLAY MODE CANCEL

pg. 28

pg. 29

pg. 15, 28

pg. 28

pg. 37

pg. 15

pg. 24

pg. 30

SET UP SETTING

TA/NEWS/INFO

ZOOM

SCAN MODE

pg. 32

pg. 31

pg. 38

pg. 14

VFP

PTY SEARCH

FL DISPLAY DIMMER SLEEP

SMART

RETURN

TREBLE

pg. 18

pg. 22

pg. 16

S.SETUP BASS

SURROUND

pg. 15

FRONT L CENTER FRONT R

S.WFR

LEVEL

pg. 15

SURR. L

SURR. R

NOTE

• To use the buttons

under the cover, slide

down the cover.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Do not connect the power cord until all other connections have been made.

If reception is poor

Connecting the FM and

AM (MW) antennas

Center unit

AM (MW) loop

antenna

7 AM (MW) loop antenna

Setting up supplied AM loop antenna

Outdoor single vinyl-covered wire antenna

(not supplied)

If the antenna cord is covered with the insulation

coat, twist and pull the insulation coat off and

remove.

7 FM antenna

FM antenna (supplied)

Center unit

Extend the supplied FM antenna

horizontally.

Connecting AM (MW) loop antenna

Center unit

If reception is poor

Center unit

Outdoor FM antenna

(not supplied)

Standard type (75 C

coaxial) connector

Outdoor FM antenna cord

(not supplied)

Antenna cord

NOTE

• We recommend that you use coaxial cable for the FM antenna as it is

well-shielded against interference.

• Turn the loop antenna until you have the best reception during

AM (MW) broadcast program reception.

NOTE

• Make sure the antenna conductors do not touch any other terminals,

connecting cords and power cords. This could cause poor reception.

Download from Www.Somanuals.com. All Manuals Search And Download.

Do not connect the power cord until all other connections have been made.

Connections

Connecting the satellite

(front, center, surround)

speakers

Before connecting the speaker cords;

Twist and pull the insulation coat off and remove.

Front speakers

SP-THC3F

Powered subwoofer

SP-PWC3

Speaker cord

• Connect the black cords to the black (r) terminals.

• Connect the white cords to the (q) terminals

referring to the table below:

FRONT SPEAKERS (LEFT)

FRONT SPEAKERS (RIGHT)

CENTER SPEAKER

White

Red

Green

Blue

SURROUND SPEAKERS (LEFT)

SURROUND SPEAKERS (RIGHT)

FROM

XV-THC3

XV-THS55

XV-THS58

XV-THS66

Gray

Ω

16Ω

Surround speakers

SP-THC3S

Center speaker

SP-THC3C

Precautions for daily use

CAUTION

• When moving the speakers, do not pull the speaker cords;

otherwise, the speakers may fall over, causing damage or injury.

• When holding a speaker, always grasp the lower portion.

• Do not lean against the speakers, as the speakers could fall down

or break, possibly causing an injury. Especially be careful that

children do not lean against them.

• When you connect speakers other than the supplied ones, use

speakers of the same speaker impedance (SPEAKER IMPEDANCE)

indicated near the speaker terminals on the rear of the powered

subwoofer.

• DO NOT connect more than one speaker to one speaker terminal.

• Be sure to have them installed on the wall by a qualified

personnel.

• DO NOT install the satellite speakers on the wall by yourself to

avoid unexpected damage from their falling off the wall due to

incorrect installation or weakness in wall structure.

• Care must be taken in selecting a location for speaker installation

on a wall. Injury to personnel or damage to equipment may result

if the speakers installed interfere with daily activities.

Download from Www.Somanuals.com. All Manuals Search And Download.

Do not connect the power cord until all other connections have been made.

Connections

Speaker layout

Connecting a TV

• Distortion of picture may occur when connecting to the TV via a

VCR, or to a TV with a built-in VCR.

• You need to set “MONITOR TYPE” in the PICTURE menu

correctly according to the aspect ratio of your TV. (A pg. 33)

Center speaker

Front left

speaker

Front right

speaker

Powered

subwoofer

7 To connect a TV equipped with the component video

input jacks

Center unit

To component

video input

Surround left

speaker

Surround right

speaker

Component video cord (not supplied)

NOTE

• Place the satellite speakers on a flat and level surface.

• The front and center speakers are magnetically shielded to avoid color

distortions on TVs. However, if not installed properly, they may

cause color distortions. So, pay attention to the following when

installing the speakers.

• If your TV supports progressive video input, you can enjoy a high

quality picture by setting the progressive scan mode to active.

(A pg. 15)

• If the component video input jacks of your TV are of the BNC type,

use a plug adapter (not supplied) to convert the pin plugs to BNC

plugs.

– When placing the speakers near a TV set, turn off the TV’s main

power switch or unplug it before installing the speakers. Then wait

at least 30 minutes before turning on the TV’s main power switch

again.

• The component video signals can be output only when you select

“DVD” as the source to play. (A pg. 14)

Some TVs may still be affected even though you have followed the

above. If this happens, move the speakers away from the TV.

• The surround speakers are not magnetically shielded.

If it is located nearby the TV or monitor, it will probably cause

color distortion on the screen. To avoid this, do not place the

speaker nearby the TV or monitor.

7 To connect a TV with the SCART connector

Center unit

• Be sure to place the powered subwoofer to the TV’s right. If you place

the powered subwoofer to the TV’s left, keep sufficient distance

between them to prevent the TV screen from appearing mottled.

To SCART

connector*

SCART cable (not supplied)

* Some TV’s SCART connectors output audio signal. In such a

case, you can enjoy the TV sound through this system.

NOTE

• No sound signal comes out from “AV” (SCART) connector.

• Select the appropriate scan mode according to your TV. See

“Changing the scan mode” (A pg. 15).

Download from Www.Somanuals.com. All Manuals Search And Download.

Do not connect the power cord until all other connections have been made.

Connections

Connecting the powered

subwoofer

Connecting to a digital

component

You can enjoy the sound of a digital component.

Powered

subwoofer

Center unit

System cord

(supplied)

Align the 5marks.

To digital optical output

DBS* tuner

MD player

Align the 5marks.

Digital optical cord (not supplied)

NOTE

• The way of connecting the system cord varies depending on the type

of the powered subwoofer.

* DBS = Direct Broadcasting Satellite

NOTE

When playing a video component such as a DBS tuner;

• To listen to the sound, select “AUX D” as the source to play.

(A pg. 14)

• To see the picture, connect the video output jack of the component to

the video input jack of the TV directly, and select the correct input

mode on the TV.

Connecting to an analog

component

You can enjoy the sound of an analog component.

Center unit

Connecting the power

cord

Make sure that all other connections have been completed.

Center unit

Powered

subwoofer

RCA pin plug cord

(not supplied)

To audio output

Power cord

(Supplied)

Power cord

VCR

Cassette recorder

Plug into AC outlets.

NOTE

• If you connect a sound-enhancing device such as a graphic equalizer

between the source components and this system, the sound output

through this system may be distorted.

CAUTION

• Disconnect the power cord before cleaning or moving the system.

• Do not pull on the power cord to unplug the cord. When unplugging

the cord, always grasp and pull the plug so as not to damage the cord.

• When playing a video component such as a VCR;

•

To listen to the sound, select “AUX” as the source to play.

(A pg. 14)

•

To see the picture, connect the video output jack of the component

to the video input jack of the TV directly, and select the correct

input mode on the TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating external components with the remote control

4 Press number buttons (1-9, 0) to enter

The buttons described below are used on pages 11 and

12.

the manufacturer’s code (2 digits).

Examples:

For a Hitachi TV:

Press 0, then 7.

For a Toshiba TV:

Press 2, then 9.

TV/VIDEO

VCR

Manufac-

turer

Manufactur-

Code

JVC

Akai

Nordmende

Okano

13, 14, 18, 26 – 28

02, 05

TV VOL

CHANNEL

Blaupunkt 03

Orion

Remote control

mode selector

Daewoo

Fenner

Fisher

10, 31, 32

Panasonic

Philips

16, 17

VCR

04, 31, 32

Saba

13, 14, 18, 26 – 28

(play button)

Grundig

Hitachi

Inno-Hit

Irradio

Sanyo

07, 08

Schneider

Sharp

02, 05

ENTER

02, 05

Sony

21 – 25

REC

Magnavox 10

Telefunken

13, 14, 18, 26 – 28

13, 14, 18,

26 – 28, 30

Mitsubishi 11, 33

Thomson

Toshiba

Miver

Nokia

Number

buttons

12, 34

100+

TV RETURN

5 Release

TV.

If there is more than one code listed for corresponding brand,

try each one until you enter the correct one.

NOTE

• Manufacturers’ codes are subject to change without notice.

• Set the codes again after replacing the batteries of the remote control.

7 Operation

Aim the remote control at the TV.

IMPORTANT

Before using the remote control to operate a TV;

• Set the remote control mode selector to TV.

Operating the TV

The following buttons are available:

TV:

TV VOL +/–:

TV/VIDEO:

Turns TV on and off.

Adjusts the volume.

Selects the input mode (either TV or

VIDEO).

7 To set the manufacturer’s code

You can operate a JVC TV without setting the manufacturer’s code.

1 Slide the remote control mode selector

CHANNEL +/–:

Changes the channels.

to TV.

1-10, 0, +10 (100+): Selects the channel.

TV RETURN: Alternates between the previously selected

channel and the current channel.

2 Press and hold TV.

Keep the button pressed until step 4 is finished.

3 Press ENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 11 for button locations.

Operating external components with the remote control

Operating the VCR

7 To set the manufacturer’s code

1 Slide the remote control mode selector

to VCR.

2 Press VCR.

3 Press and hold FVCR.

Keep the button pressed until step 5 is finished.

4 Press ENTER.

5 Press number buttons (1-9, 0) to enter

the manufacturer’s code (2 digits).

Examples:

For a Panasonic VCR:

Press 2, then 1.

For a Philips VCR:

Press 0, then 5.

Manufac-

turer

Manufac-

turer

Code

JVC

Nokia

Aiwa

02, 20

Nordmende 17 – 19, 31

Bell+Howell 03, 16

Orion

Blaupunkt

CGM

Panasonic

Philips

Phonola

Saba

03, 05, 16

05, 22

Daewoo

Digtal

17 – 19, 23, 31

24, 25

Fisher

03, 16

Samsung

Sanyo

G.E.

03, 16

Grundig

Hitachi

Loewe

Sharp

26, 27

08, 09

05, 10, 11

04, 05

12 – 15

Siemens

Sony

28 – 30, 35

17 – 19, 31, 32

Magnavox

Mitsubishi

Telefunken

Toshiba

6 Release FVCR.

If there is more than one code listed for your brand, try each

one until you enter the correct one.

7 Operation

Aim the remote control at the VCR.

IMPORTANT

Before using the remote control to operate a

VCR;

• Set the remote control mode selector to VCR.

The following buttons are available:

FVCR : Turns VCR on and off.

3(play button): Starts playback.

8 :

Stops operation.

Pauses playback.

y :

REC:

Fast forwards video tape.

Rewinds video tape.

Press this button together with 3(play button) to

start recording or together with 8to pause

recording.

CHANNEL +/–: Changes the TV channels on the VCR.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic operations

The buttons on the remote control are used to explain most of the

operations in this manual. You can use the buttons on the center

unit same as on the remote control for operations unless

otherwise noted.

Turning the system on/off

On the remote control:

Press

AUDIO.

IMPORTANT

Before using the remote control for the following

On the center unit:

Press

operation;

• Set the remote control mode selector to AUDIO.

When DVD is selected as the source (A pg. 14), the following

messages will appear on the TV screen.

The buttons described below are used on

pages 13 to 16.

• “OPEN”/“CLOSE”:

Appears when opening or closing the disc tray.

• “NOW READING”:

TV SOUND

Source

selecting

buttons

Appears when the system is reading the disc information.

• “REGION CODE ERROR!”:

Remote control

mode selector

Appears when the Region Code of the DVD VIDEO does not

match the code the system supports. The disc cannot be

played back.

• “NO DISC”:

Appears when no disc is loaded.

• “CANNOT PLAY THIS DISC”:

Appears when unplayable disc is loaded.

Cursor

(3/2/Y/5)/

ENTER

NOTE

• The STANDBY lamp turns on when the power is turned off and turns

off when the power is turned on.

• The power supply to the subwoofer is linked to the center unit. The

POWER ON lamp on the subwoofer lights green when the power is

turned on.

• A small amount of the power is consumed even when the power is

turned off (center unit only). This is called standby mode and the

STANDBY lamp lights in this mode. Unplug the power cord from the

AC outlet to turn the power off completely.

• You can also turn on the system by pressing the following buttons;

DIMMER SLEEP

SMART

•

One of 0buttons on the center unit

One of the source selecting buttons on the remote control

One of the DISC (1-5) 3buttons or 3on the center unit

You can use the same buttons on the remote control.

S.SETUP BASS

TREBLE

LEVEL

BASS/

LEVEL

FRONT L CENTER FRONT R

Speaker

buttons

S.WFR

SURR. L

SURR. R

SOURCE

DISC

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 13 for button locations.

Basic operations

Selecting the source to

play

Listening with headphones

(not supplied)

On the remote control:

CAUTION

Be sure to turn down the volume;

Press one of the source selecting buttons

(DVD, FM/AM, AUX or TV SOUND).

• Before connecting or putting on headphones as high volume may

damage both the headphones and your hearing.

• Before disconnecting headphones as high volume may be suddenly

output from the speakers.

DVD:

To play back a disc (DVD VIDEO, VCD etc.).

(A pg. 17)

FM/AM:

To tune in an FM or AM station. (A pg. 35)

Each time you press the button, the band alternates

between FM and AM.

While connecting a pair of headphones to the PHONES jack on the

center unit, the system automatically cancels the surround mode

(A pg. 21) currently selected, deactivates the speakers, turns the

subwoofer’s power off, and activates the headphone mode. “H.

PHONE” appears on the display window.

AUX:

To select the source from a component connected to

the AUX IN jacks or DIGITAL IN jack. (A pg. 10)

Each time you press the button, the source alternates

between “AUX” and “AUX D”.

Headphone mode

When using the headphones, the following signals are output

regardless of your speaker setting;

TV SOUND: To select the TV (that outputs sound signals)

connected to the AV (SCART) connector. (A pg. 9)

• For 2 channel sources, the front left and right channel signals are

output from the headphones.

On the center unit:

• Multi-channel signals are down-mixed and output from the

headphones.

Press SOURCE repeatedly until the source

name you want appears on the display

window.

• (For DVD AUDIO) When the disc prohibits down-mixing, only

the front left and right channels are output from the headphones.

In this case, “LR ONLY” appears on the display window for a

few seconds.

NOTE

• When a source except DVD is selected, this system does not output

video signals.

• It may take time to change the source.

Turning off the sound

temporarily [MUTING]

Press MUTING.

Adjusting the volume

[VOLUME]

To restore the sound

Perform one on the following:

CAUTION

• Press MUTING again.

• Press AUDIO VOL +/– (or turn VOLUME on the center unit).

• Always set the volume to minimum level before starting any source.

If the volume is set at its high level, the sudden blast of sound could

permanently damage your hearing and/or blow out the speakers.

Adjusting the brightness

of the indications

[DIMMER]

On the remote control:

Press AUDIO VOL +/–.

On the center unit:

Turn VOLUME.

Press DIMMER.

Each time you press the button, the brightness level changes.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 13 for button locations.

Basic operations

Sleep Timer [SLEEP]

The system turns off automatically when the specified period of

time has passed.

Changing the scan mode

The system can be accommodated to your TV’s scan mode.

NOTE

Press SLEEP.

Each time you press the button, the shut-off time changes.

• To use the system in PROGRESSIVE mode, it is required that the

center unit is connected to the TV by using a component video cord

(not supplied). (A pg. 9)

Example:

7While DVD is selected as the source and stopped

minutes

1 Press and hold SCAN MODE for

S L E E P

6 0

2 seconds.

“RGB”, “Y/C”, or “PROGRESS” appears on the display

window.

To check the remaining time

Press SLEEP once.

2 Press Cursor 3/2to select the desired

mode.

• RGB:

To change the remaining time

Press SLEEP repeatedly.

Select this when your TV accommodates

the interlaced RGB/composite video

signal.

To cancel

Press SLEEP repeatedly until “SLEEP – –” appears.

• Turning off the power also cancels the Sleep Timer.

• Y/C:

Select this when your TV accommodates

the interlaced S-video signal.

Select this when your TV equipped with

component jacks supports the progressive

video input.

• PROGRESS:

Adjusting the output level

of the subwoofer and

speakers

Press each speaker button you want to

adjust the output level and then LEVEL +/–.

You can get better picture quality in the order —

“PROGRESSIVE” > “RGB” > “Y/C” > Composite.

3 Press ENTER while the selected mode

is displayed.

When “PROGRESS” is selected, the PROGRESSIVE

indicator lights on the display window.

• FRONT L:

• FRONT R:

• SURR. L:

• SURR. R:

• CENTER:

• S.WFR:

Front Left speaker

Front Right speaker

Surround Left speaker

Surround Right speaker

Center speaker

NOTE

• Although the picture may be distorted when you press ENTER, this

is not a malfunction of the system.

• “RGB” is selected at your purchase.

Subwoofer

• There are some progressive TVs and High-Definition TVs that are

not fully compatible with this system, resulting in an unnatural

picture when playing back a DVD VIDEO in the progressive scan

mode. In such a case, change the scan mode to “RGB” or “Y/C”.

To check the compatibility of your TV, contact your local JVC

customer service center.

NOTE

• You can also make adjustments by using the setup menu shown on the

TV screen. (A pg. 34)

• The adjustments take effect for all sources.

• All JVC progressive TVs and High-Definition TVs are fully

compatible with this system.

Adjusting the treble

sound [TREBLE]

Press TREBLE and then LEVEL +/–.

NOTE

• The adjustments take effect for all sources.

Adjusting the bass sound

[BASS]

Press BASS and then LEVEL +/–.

NOTE

• The adjustments take effect for all sources.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 13 for button locations.

Basic operations

Optimizing the speaker

settings [Smart Surround

Setup]

NOTE

• When you change the positioning of the speakers or listener, or

replace the supplied speakers with other ones, perform Smart

Surround Setup again.

7While DVD is selected as the source and stopped

1 Take your position where you listen to

the sound.

2 Press and hold SMART S. SETUP.

“SETTING” appears on the display window.

3 Clap your hands over your head once.

4 Make sure that “COMPLETED !”

appears on the TV screen, then press

SMART S. SETUP.

The system detects your clapping sound through the satellite

speakers, then automatically makes the best settings for each

speaker. “COMPLETED !” appears on the TV screen when

Smart Surround Setup completes.

When “FAILED !” appears on the TV screen

The system could not detect the clapping sound correctly. In such a

case, follow the instructions that appear on the TV screen.

• When the system detects the clapping sound as “FAILED !” three

times, set the delay time (DELAY) and the output level (LEVEL)

manually. (A pg. 34)

To cancel

Press SMART S. SETUP.

NOTE

• You need to set the subwoofer’s output level (LEVEL) manually.

(A pg. 15)

• In step 2, “SW ERROR” appears on the display window if the center

unit and the powered subwoofer are not connected correctly by using

the supplied system cord.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

DVD

VIDEO

• The icon such as

shows the disc formats or file types the

Basic playback

operation is available for.

IMPORTANT

Before using the remote control for the

following operation;

1 Set the remote control mode selector to

AUDIO.

DVD DVD DVD

VIDEO AUDIO VR

1 Press the desired DISC (1-5)

0on the center unit.

• The system turns on and the disc tray

comes out.

2 Press DVD.

2 Place a disc.

Label side up

The buttons described below are used on pages 17 to 20.

When placing an 8 cm

disc

DISC 1

DISC 3

DVD

DISC 2

DISC 4

DISC 5

3 Press DISC (1-5).

For MP3/WMA files

AUDIO

(play button)

Remote control

mode selector

The file control display (A pg. 25) appears on the TV screen.

For JPEG files

Each file (still pictures) is shown on the TV screen for about 3

seconds (slide-show). When stopping playback, the file control

TOP MENU/PG

MENU/PL

display (A pg. 25) appears on the TV screen.

TOP MENU/PG

MENU/PL

For DVD VR disc

Pressing TOP MENU/PG or MENU/PL shows the control display

on the TV screen. (A pg. 20)

ENTER

7 To pause playback

Press 8.

To return to playback, press 3(play button).

TITLE/GROUP

Number buttons

7 To stop

Press 7.

7 On-screen guide icons

During DVD VIDEO playback, the following guide icons may

appear for a while on the TV screen;

FL DISPLAY

•

: appears at the beginning of a scene containing multi-

subtitle languages.

: appears at the beginning of a scene containing multi-audio

languages.

: appears at the beginning of a scene containing multi-angle

views.

(Play),

(Pause),

(Fast forward/

fast-reverse),

reverse): appears when you perform each operation.

(Slow-motion forward/

•

: the disc cannot accept an operation you have tried to do.

NOTE

• Up to 5 discs can be loaded.

DISC

• You can also start playback by pressing 3(play button) or DVD.

• The system plays back available discs sequentially until you stop

playback or until the disc loaded on the DISC 5 tray reaches to the

end. However, when DVD VIDEO or DVD AUDIO is loaded in the

system, playback of the disc next to the DVD VIDEO or DVD

AUDIO will not start.

• (For JPEG) The system cannot accept operations even though you

press any buttons before the entire picture appears on the TV screen.

• If you do not want the on-screen guide icons to appear, see page 34.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 17 for button locations.

Playback

MP3/WMA file

7 Playback information on the display window

DVD VIDEO

Example:

When an MP3 is played back

Example:

Signal and speaker

indicators

When a DVD VIDEO encoded with Dolby Digital 5.1ch is played

Track number

Elapsed playing time

Chapter number

(hour:minute:second)

1 2 3

1 2 3 4

MP3

SURR

1: 2 3: 3 1

2 4

MP3 indicator*¹

Elapsed playing time (minute:second)

(during playback only)

Signal and speaker indicators (A pg. 22)

Surround mode and digital signal format (A pg. 22)

Pressing FL DISPLAY

Group number

Pressing FL DISPLAY

G 1 2

T 1

Title number

Chapter number

MP3

Track number

C 2 4

1 5

SURR

^*1WMA indicator lights for WMA disc.

JPEG file

DVD AUDIO

File number

Signal and speaker indicators

1 2 3

J P E

1 2 3

P LPCM

Track number

Elapsed playing time

(hour:minute:second)

Pressing FL DISPLAY

Group number

File number

Pressing FL DISPLAY

G 1 2

F 1 2 3

Group number

Track number

P LPCM

T 1

DVD VR disc

Example:

During playback on the Original program*

VCD/SVCD/CD

Elapsed playing time

(hour:minute:second)

Example:

Title number

When a CD is played back

2 2

0: 2 0: 3 6

Signal and speaker

indicators

Track number

PG (Original program) indicator

LPCM

1 2

3: 3

Pressing FL DISPLAY

Title number

Elapsed playing time (minute:second)

Chapter number

NOTE

• When a VCD or SVCD with PBC function is played, the elapsed

P G

1 C

playing time does not appear, but “PBC” appears.

Continued on next page

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 17 for button locations.

Playback

Example:

During playback on the Playlist*

Fast-forward/fast-reverse

7During playback

Elapsed playing time

(hour:minute:second)

Title number

DVD DVD DVD

VIDEO AUDIO VR

3 0

0: 5 0: 3 0

On the remote control:

Press y or 1.

Each time you press the button, the search speed

PL (Playlist) indicator

Pressing FL DISPLAY

changes.

To return to normal speed playback

Playlist number

Chapter number

Press 3(play button).

Press and hold xor 4.

Continuously pressing xor 4increases the fast-forward/

reverse search speed.

P L

1 C

* Pressing TOP MENU/PG or MENU/PL, you can change the

play mode. (A pg. 20)

NOTE

• The operation with xor 4above is available for a disc other

than MP3 and WMA.

NOTE

• You can change the time information mode (except for MP3/WMA/

• When a DVD VIDEO, DVD VR, VCD and SVCD is played back, no

sound comes out during fast-forward/reverse search.

• When a DVD AUDIO or CD is played back, sound is intermittent and

low during fast-forward/reverse search.

JPEG). (A pg. 23)

• You can also check the playback information on the TV screen.

(A pg. 22)

• This feature may not work for some discs.

7 Disc information on the display window

The disc indicators on the display window show the current status

of the corresponding disc tray.

Skip to the beginning of a

desired selection

Example:

When the discs are loaded to disc trays 1, 2 and 5, and the disc in the

disc tray 5 is selected.

DVD DVD DVD

VIDEO AUDIO VR

7 Using x/4buttons

7For DVD VIDEO/DVD VR (chapter):

During playback

For VCD/SVCD (track):

Currently selected

disc number

During playback without PBC function

For DVD AUDIO/CD/MP3/WMA/JPEG (track/file): During

playback or while stopped

Currently loaded disc number

Press xor 4repeatedly.

NOTE

• When playing back an MP3/JPEG file, you can make operations

7 Screen saver

A TV screen may burn out if a static picture is displayed for a long

time. To prevent this, the system automatically dims the screen if a

static picture is displayed for over 5 minutes (the screen saver

function).

using the file control display. (A pg. 25)

• This feature may not work for some discs.

7 Using number buttons on the remote control

• Pressing any button will cancel the screen saver function.

• If you do not want to use the screen saver function, see page 33.

7For DVD VIDEO/DVD VR (title, chapter):

While stopped, the title number is selected.

During playback, the chapter number is selected.

For DVD AUDIO (track):

During playback or while stopped

For VCD/SVCD (track):

During playback without PBC function

For CD/MP3/WMA/JPEG (track/file):

During playback or while stopped

One Touch Replay

You can move back the playback position by 10 seconds

from the current position.

7During playback

DVD DVD

VIDEO VR

Press number buttons (0-10, +10) to select

the desired number.

• For details on using the number buttons, see “How to use the

On the remote control:

Press

number buttons” below.

NOTE

• This function works in the same title.

How to use the number buttons

• This function is not available during the repeat playback.

• This feature may not work for some discs.

To select 3:

To select 14:

To select 24:

To select 40:

Press 3.

Press +10, then 4.

Press +10 twice, then 4.

Press +10 three times, then 10.

Or press +10 four times, then 0.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 17 for button locations.

Playback

Locating a desired title/

group using number

buttons

Selecting the desired

title/playlist from the

control display

7During playback or while stopped.

7During playback or while stopped

DVD DVD

VIDEO AUDIO

1 Press TITLE/GROUP.

1 Press TOP MENU/PG or MENU/PL.

“_ _” or “_” is shown in the title/group

display area in the display window.

The control display is shown on the TV screen, and the system

starts playback of the first title/playlist.

• The PLAY LIST is shown only when the playlist is on the

DVD VR disc.

Example:

During DVD VIDEO playback

TOP MENU/PG: shows the ORIGINAL PROGRAM.

Example:

_ _

1 2 3 4 5

ORIGINAL PROGRAM

2 While the display window shows “_ _”

or “_”, use number buttons (0-10, +10)

to enter the desired title or group

number.

No Date

Time

Title

1 25/04/04 4ch 19:00

2 17/05/04 8ch 10:30

3 22/05/04 8ch 17:00

4 26/05/04 L-1 13:19

5 20/06/04 4ch 22:00

JVC DVD World 2004

Music Festival

children 001

6 25/06/04 L-1

8:23

children 002

The system starts playback from the first chapter/track/file of

the selected title/group.

• For details on using the number buttons, see “How to use the

number buttons” (A pg. 19).

*1: Title number

*2: Recording date

NOTE

• This feature may not work for some discs.

*3: Recording source (TV station, the input terminal of the

recording equipment etc.)

*4: Start time of recording

Playing back a bonus

group

*5: Title of the original program/playlist (The title may not be

displayed depending on the recording equipment.)

*6: Current title

Some DVD AUDIOs have a special group called “bonus

group” whose contents are not open to the public. The

DVD

AUDIO

MENU/PL: shows the PLAY LIST.

Example:

bonus group is always assigned to the last group of a disc.

To play back a bonus group, you have to enter the specific “key

number” (a password). The way of getting the key number depends

on the disc. After getting the key number, you can play back the

bonus group by following the procedure below.

PLAY LIST

No Date

Chap Length

Title

1 25/05/04 001 1:03:16

2 17/06/04 005 1:35:25

3 20/06/04 003 0:10:23

4 25/06/04 001 0:07:19

My JVC World

7While the BONUS indicator lights up on the display window

Favorite music

children001-002

1 Select the bonus group.

For selecting the group, see “Locating a desired title/group

using number buttons” described above.

The key number entry indication appears.

On the TV

*10

*11

*7: Playlist number

*8: Creating date of playlists

*9: Number of chapters

*10:Total playing time

*11:Current playlist

On the display window

_ _ _ _

K E Y

2 Press Y/5to select the desired title/

The system starts playback of the selected title/playlist.

BONUS

playlist.

2 Press number buttons (0-9) to enter the

key number, then press ENTER.

To clear the control display

• Press ENTER.

When you enter the correct key number, playback starts and

the BONUS indicator goes off.

• If you enter the wrong number, reenter the correct number.

About the play mode on a DVD VR disc

To clear the key number entry

Perform whichever one of the following:

• Open the disc tray.

• Original program (ORIGINAL PROGRAM):

The system can play back the original picture in the recorded

order.

• Turn off the system.

• Playlist (PLAY LIST):

The system can play back the playlist edited by the recording

equipment.

NOTE

• In Random Playback, tracks in the bonus group are not played back.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

DVD

VIDEO

• The icon such as

shows the disc formats or file types the

Using the surround mode

7 Auto Surround (AUTO SUR)

Used to reproduce the sound as it is recorded without any

conversion (downmixing or simulation, etc.). For example, a

multichannel source is automatically reproduced in multichannel

audio.

operation is available for.

IMPORTANT

Before using the remote control for the following

operation;

• Set the remote control mode selector to AUDIO.

• There are exceptions in the operation mentioned

above. In such a case, follow each instruction.

7 Dolby Surround

Dolby Pro Logic II*¹

The buttons described below are used on pages 21 to 31.

Dolby Pro Logic II has a newly developed multichannel playback

format to decode all 2 channel sources — stereo source and Dolby

Surround encoded source — into a 5.1 channel.

Dolby Pro Logic II has two modes — Movie mode and Music

mode:

AUDIO

(play button)

Remote control

mode selector

SLOW

• Pro Logic II Movie (MOVIE)

Suitable for reproduction of Dolby Surround encoded sources

SLOW

MENU/PL

TOP MENU/PG

bearing the mark

• Pro Logic II Music (MUSIC)

/PG

/PL

Cursor

(3/2/Y/5)/

ENTER

Suitable for reproduction of any 2 channel stereo music sources.

Dolby Digital*¹

Used to reproduce multichannel soundtracks of the software

encoded with Dolby Digital (

7 DTS Digital Surround*

Used to reproduce multichannel soundtracks of the software

Number buttons

encoded with DTS Digital Surround (

DTS Digital Surround (DTS) is another discrete multichannel

digital audio format available on CD and DVD software.

SURROUND

Available Surround modes for each input signal

The B marks show available surround modes.

Surround

off

Auto

Surround

DTSDigital Linear Packed

Surround

Manufactured under

license from Dolby

Laboratories. “Dolby”,

“Pro Logic”, “MLP

Lossless”, and the

double-D symbol are

trademarks of Dolby

Laboratories.

“DTS” and “DTS

Digital Surround” are

registered trademarks

of Digital Theater

Systems, Inc.

Mode

Dolby Surround

DSP

ALL

PCM

DOLBY

Signal

SURR OFF AUTO SUR MOVIE* MUSIC*

DTS

LPCM

PPCM

ST*

Dolby D

(Multichannel)

—

Dolby D

(2 channel)

—

DTS Digital

Surround

(Multichannel)

—

DTS Digital

Surround

(2 channel)

—

You can select these

modes by pressing

SURROUND.

Analog or

Linear/Packed

PCM

—

(2 channel)

(A pg. 22)

Linear/Packed

PCM

(Multichannel)

—

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 21 for button locations.

Advanced operations

7 All Channel Stereo (DSP)

7 When playing back digital multichannel software

(except during SURR OFF mode)

The appropriate multichannel surround mode (Dolby D, DTS

Digital Surround or Linear/Packed PCM) is automatically selected.

All Channel Stereo (ALL ST) mode can reproduce a larger stereo

sound field using all the connected (and activated) speakers.

All Channel Stereo can be used while reproducing 2 channel stereo

source.

Normal stereo sound

All Channel Stereo

7 When playing back 2 channel source

You can select either mode of Dolby Pro Logic II (MOVIE/

MUSIC) or the DSP (ALL ST) mode.

Press SURROUND repeatedly to select the

desired mode.

The surround mode is turned on and the current surround mode

appears on the display window.

Each time you press the button, the surround mode changes.

7 Indicators on the display window

Digital signal format indicators

For details on each mode, see page 21.

PPCM, SURR:

Lights when DVD AUDIO packed PCM signals

comes in.

To turn off the surround mode

Press SURROUND repeatedly until SURR

OFF appears on the display window.

LPCM, SURR:

GD, SURR:

C, SURR:

Lights when Linear PCM signal comes in.

Lights when Dolby D signals come in.

Lights when DTS Digital (Surround) signals

come in.

Storing adjustments — auto memory

No indication:

No digital signal indicator lights when analog

signals come in.

When you turn the power off, the system memorizes the current

surround mode. The memorized mode is automatically recalled

when you turn the power on.

Dolby Surround/DSP mode indicators

GPLII, SURR: Lights when Dolby Pro Logic II mode is

activated.

NOTE

• When FM or AM is selected as the source, you can select All Channel

Stereo (ALL ST) and SURR OFF mode.

SURR:

Lights when All Channel Stereo mode is

activated.

• For a down-mixing prohibited DVD AUDIO disc, the system

continues to output multi-channel signals with “MULTI CH” shown

on the display window even if the surround mode is turned off during

playback. On the other hand, the system outputs only the front left and

right channel signals with “LR ONLY” shown on the display window

when you start playback with the surround mode having been set to

“SURR OFF” or “H. PHONE”.

Source signal indicators, etc.

Light to indicate the incoming signals.

a: Lights when the left channel signal comes

in.

b: Lights when the center channel signal comes in.

c: Lights when the right channel signal comes in.

d: Lights when the LFE channel signal comes in.

g: Lights when the surround left channel signal comes in.

i: Lights when the surround right channel signal comes in.

h: Lights when the monaural surround channel signal or 2

channel Dolby Surround signal comes in.

SW : Always lights.

Using the on-screen bar

You can check disc information and you can use some functions

using the on-screen bar.

The channel with “ ” shows that the corresponding speakers are

reproducing the channels’ sound.

If the channels’ sound decoded into 5.1 channel is reproduced, only

Showing the on-screen bar

7Whenever a disc is loaded

DVD DVD DVD

“

” lights.

VIDEO AUDIO VR

Press ON SCREEN.

Each time you press the button, the on-screen bar

changes as follows on the TV screen.

Selecting the surround mode

The system is set up to automatically select the optimal surround

mode for input signal from digital multichannel software.

When playing back 2 channel source, you can select the desired

surround mode manually.

Example:

During DVD VIDEO playback

Dolby D

2/0 . 0ch

IMPORTANT

Before using the remote control for the following

operation;

• Set the remote control mode selector to AUDIO.

Dolby D

2/0 . 0ch

OFF

(The on-screen bar disappears)

(back to the beginning)

• The currently selected item shows green.

Continued on next page

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 21 for button locations.

Advanced operations

G Shows playback status.

appears during playback.

: appears during fast forward/reverse.

7 Contents of the on-screen bar during playback

DVD VIDEO

: appears during playback in forward slow-motion/

reverse slow-motion.

Dolby D

2/0 . 0ch

appears when paused.

appears when stopped.

H Select this to change time information (F). See “Changing the

time information” below.

DVD AUDIO

I Select this for Repeat Playback. (A pg. 30)

J Select this for time search function. (A pg. 25)

K Select this for chapter (for DVD VIDEO and DVD VR) or track

(for DVD AUDIO) search function. (A pg. 24)

L Select this to change audio language, channel, or stream.

(A pg. 27)

M Select this to change subtitle language and subpicture.

(A pg. 26)

N Select this to change view angle. (A pg. 26)

O Select this to change the page. (A pg. 28)

P Shows Playback Mode status.

Dolby D

2/0 . 0ch

VCD

SVCD

PROGRAM: appears during Program Playback. (A pg. 29)

RANDOM: appears during Random Playback. (A pg. 29)

Changing the time information

You can change the time information in the on-

DVD DVD DVD

VIDEO AUDIO VR

screen bar on the TV screen and the display

window of the center unit.

7During playback

1 Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

2 Press Cursor 3/2to highlight

DVD VR disc

3 Press ENTER repeatedly to select the

desired information.

Dolby D

2/0 . 0ch

CHAP

TOTAL 0:00:34

DVD-VR

Example:

When elapsed playing time of disc is selected.

A Shows disc type.

B Shows audio information.

C Shows disc number.

7VCD/SVCD/CD

• TIME: Elapsed playing time of current track

• REM:

Remaining time of current track

D Shows current title (for DVD VIDEO), group (for DVD

AUDIO) number or play mode (for DVD VR).

• TOTAL: Elapsed time of disc

• T. REM: Remaining time of disc

E Shows current chapter number (for DVD VIDEO and DVD VR)

or track number (for other type of discs).

F Shows time information. See “Changing the time information”.

7DVD VIDEO/DVD AUDIO/DVD VR

• TIME: Elapsed playing time of current chapter/track

• REM:

Remaining time of current chapter/track

• TOTAL: Elapsed time of Title/Group/Program

• T. REM: Remaining time of Title/Group/Program

4 Press ON SCREEN.

The on-screen bar disappears.

NOTE

• When playing back DVD VR, “TIME” and “REM” cannot be shown.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 21 for button locations.

Advanced operations

2 Press number buttons (1-10, +10) to

• For details on using the number buttons, see “How to use the

number buttons” (A pg. 19).

Playing from a specified

position on a disc

You can start playing a title, chapter or track you specify. You can

select the number of the desired item.

To return to the menu

also play a disc from specified time.

Press RETURN.

When “NEXT” or “PREVIOUS” is shown on the TV

screen:

Locating a desired scene from the DVD

DVD VIDEOs generally have their own menus which show

• To go to the next page, press x.

• To return to the previous page, press 4.

DVD

disc contents and you can display them on the TV screen.

You can locate a desired scene by using these menus.

VIDEO

NOTE

• If you want to play a PBC-compatible VCD/SVCD without using the

PBC function, perform any of the following:

7Whenever a DVD VIDEO is loaded

•

Start playback by pressing number buttons while stopped.

Press xrepeatedly until the desired track number is displayed,

then start playback by pressing 3(play button).

The track number appears on the display window instead of

“PBC”.

1 Press TOP MENU/PG or MENU/PL.

The menu appears on the TV screen.

Example:

• To activate the PBC function when playing a PBC-compatible VCD/

SVCD without using the PBC function, perform any of the following:

•

Press TOP MENU/PG or MENU/PL.

Press 7twice to stop playback, then press 3(play button).

Locating a desired chapter/track using the

on-screen bar

Normally, a DVD VIDEO which contains more than one title

will have a “top” menu which lists the titles. Press

TOP MENU/PG to show the title menu.

Some DVD VIDEO may also have a different menu which is

shown by pressing MENU/PL.

7During playback

DVD DVD DVD

VIDEO AUDIO VR

See the instructions for each DVD VIDEO regarding its

particular menu.

1 Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

2 Use Cursor 3/2/Y/5to select a

2 Press Cursor 3/2to highlight

desired item.

3 Press ENTER.

• With some discs, you can also select items by entering the

corresponding number using number buttons.

Example:

During DVD VIDEO playback

Dolby D

Locating a desired scene using a VCD/

SVCD menu with PBC

2/0 . 0ch

A VCD or SVCD recorded with PBC has its own

menus such as a list of contained songs. You can locate

a specific scene by using these menus.

4 Press number buttons (0-9) to enter the

desired chapter number.

Example:

7During playback with PBC function

To select 8:

To select 10:

To select 20:

To select 37:

Press 8.

1 Press RETURN repeatedly until the

Press 1, then 0.

Press 2, then 0.

Press 3, then 7.

menu appears on the TV screen.

Example:

To correct a misentry

Repeat step 4.

5 Press ENTER.

6 Press ON SCREEN.

The on-screen bar disappears.

NOTE

• You can select up to the 99th chapter/track.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 21 for button locations.

Advanced operations

Locating a desired position by specifying

the time

Using the file control

display

You can search and play desired groups and tracks/files

using the file control display on the TV screen.

7For DVD VIDEO/DVD AUDIO/DVD VR:

During playback

DVD DVD DVD

VIDEO AUDIO VR

For VCD/SVCD:

While stopped or during playback without PBC

Current group/total group Playback mode (PROGRAM,

function

number

RANDOM, REPEAT)

For CD:

During playback or while stopped

Elapsed playing time of current

track (for MP3/WMA only)

Tag information (for MP3/

WMA only)

7 When specifying the elapsed playing time from the

beginning of the disc

Perform the following procedure while stopped.

7 When specifying the elapsed playing time from the

beginning of the current title/track

Perform the following procedure during playback.

1 Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

2 Press Cursor 3/2to highlight

3 Press ENTER.

Dolby D

2/0 . 0ch

Current group

Current track (file)

Current track (file) / total track

(file) number on current group

Total track (file)

number on disc

4 Use number buttons (0-9) to enter the

time.

Playback status

Example:

To play back from a point 2 (hours): 34 (minutes): 08 (seconds)

elapsed

The file control display appears automatically during playback

(MP3/WMA) or while stopped.

7For MP3/WMA:

During playback or while stopped

For JPEG:

Press 2

Press 4

Press 3

Press 0

While stopped

1 Press Cursor 3/2/Y/5to select the

• For MP3/WMA, playback starts from the selected track.

Press 8

To cancel a misentry

Press Cursor 2repeatedly.

desired group/track/file.

2 Press 3(play button) or ENTER.

file.

5 Press ENTER.

• Track playback/slide-show starts from the selected track/

6 Press ON SCREEN.

• When you press ENTER for JPEG, only the selected file is

played back.

The on-screen bar disappears.

NOTE

• You can specify time in hours/minutes/seconds for DVD VIDEO/

DVD AUDIO/DVD VR and in minutes/seconds for VCD/SVCD/CD.

NOTE

• (For MP3/WMA) During playback, you can locate the desired track/

file by pressing x/4or Cursor 5/Y.

• You can also check playback information on the display window.

(A pg. 18)

• Some group, track and file names may not be displayed correctly

depending on recording conditions.

• The order of groups, tracks and files may be displayed differently

from the order displayed on your personal computer.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 21 for button locations.

Advanced operations

Resume Playback

Selecting the subtitle

When Resume Playback is set to “ON” (A pg. 34)

and you stop playback by the following operations,

the position where playback has been stopped is

stored. (“RESUME” appears on the display

window.)

7During playback of a disc containing subtitles in

several languages

DVD DVD DVD

VIDEO AUDIO VR

DVD DVD DVD

VIDEO AUDIO VR

When using the SUBTITLE button:

1 Press SUBTITLE.

• Turning off the power (A pg. 13)

• Pressing 7once

• Changing the source (A pg. 14)

Example (DVD VIDEO):

“ENGLISH” is selected out of 3 subtitle languages recorded.

To start playback from the stored position

Press 3(play button) or DVD.

• There may be a case where 3(play button) does not work after

changing the source.

2 Press Cursor Y/5to select the desired

To clear the stored position

Press 7again or open the disc tray with the playback disc.

subtitle.

For DVD VR

• Pressing SUBTITLE activates the subtitles (subpictures)

regardless of whether the subtitles are recorded or not.

(subpictures will not change if no subpictures is recorded.)

Selecting a view angle

7During playback of a disc containing multi-view

angles

DVD DVD

VIDEO AUDIO

For SVCD

• An SVCD can contain up to four subtitles. Pressing

SUBTITLE changes the subtitles regardless of whether the

subtitles are recorded or not. (Subtitles will not change if no

subtitle is recorded.)

When using the ANGLE button:

1 Press ANGLE.

Example:

NOTE

The first view angle is selected out of 3 view angles recorded.

• To clear the subtitle, press SUBTITLE. Each time you press

SUBTITLE, subtitle appears and disappears alternately.

When using the on-screen bar:

1 Press ON SCREEN twice.

2 Press ANGLE repeatedly or press

Cursor Y/5to select the desired view

angle.

The on-screen bar appears on the TV screen.

2 Press Cursor 3/2to highlight

3 Press ENTER.

When using the on-screen bar:

Dolby D

2/0 . 0ch

1 Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

2 Press Cursor 3/2to highlight

3 Press ENTER.

4 Press Cursor Y/5repeatedly to select

the desired subtitle.

Dolby D

2/0 . 0ch

5 Press ENTER.

6 Press ON SCREEN.

The on-screen bar disappears.

4 Press Cursor Y/5to select the desired

NOTE

• To clear the subtitle, press SUBTITLE. Each time you press

SUBTITLE, subtitle appears and disappears alternately.

• Some subtitle or audio languages are abbreviated in the pop-up

window. See “The language codes list” (A pg. 32).

• During DVD AUDIO playback, this feature is available only for the

video part.

view angle.

5 Press ENTER.

6 Press ON SCREEN.

The on-screen bar disappears.

NOTE

• During DVD AUDIO playback, this feature is available only for the

video part.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 21 for button locations.

Advanced operations

Selecting the audio

7During playback of a disc containing audio in

several languages

Special picture playback

DVD DVD DVD

VIDEO AUDIO VR

Frame-by-frame playback

7During playback

When using the AUDIO button:

DVD DVD DVD

VIDEO AUDIO VR

Press 8repeatedly.

Each time you press the button, the still picture

advances by one frame.

1 Press AUDIO.

Example (DVD VIDEO):

“ENGLISH” is selected out of 3 audio languages recorded.

To return to normal playback

Press 3(play button).

Playing back in slow-motion

7During playback

DVD DVD DVD

VIDEO AUDIO VR

2 Press AUDIO repeatedly or press

Cursor Y/5to select the desired audio.

1 Press 8at the point where

you want to start playback in

slow-motion from.

The system pauses playback.

When using the on-screen bar:

1 Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

2 Press SLOW 9.

2 Press Cursor 3/2to highlight

3 Press ENTER.

• Playback in forward slow-motion starts.

For DVD VIDEO/DVD AUDIO only:

• To play back in reverse slow-motion, press SLOW (.

Dolby D

2/0 . 0ch

Each time you press the button, the playback speed become

faster.

Example: On the TV

4 Press Cursor Y/5to select the desired

audio.

To return to normal playback

Press 3(play button).

5 Press ENTER.

NOTE

6 Press ON SCREEN.

• Sound cannot be heard during slow-motion playback.

• During DVD AUDIO playback, this feature is available only for the

video part.

The on-screen bar disappears.

NOTE

• Some subtitle or audio languages are abbreviated in the pop-up

window. See “The language codes list” (A pg. 32).

• “ST”, “L” or “R” is displayed when playing a VCD, SVCD or DVD

VR respectively representing “stereo”, “left sound” and “right

sound”.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 21 for button locations.

Advanced operations

Selecting browsable still picture recorded

on DVD AUDIO

Changing the VFP setting

The VFP (Video Fine Processor) function enables

you to adjust the picture character according to the

type of programming, picture tone or personal

preference.

DVD DVD DVD

VIDEO AUDIO VR

Most DVD AUDIOs include browsable still pictures

(B.S.P.), which usually appear by turns automatically

during playback according to the playback sequence. You

DVD

AUDIO

can change the picture (turn the page) manually when the current

group/track has selectable pictures (pages).

7During playback

1 Press VFP.

7During playback and while the B.S.P. indicator lights up on the

display window

The current VFP settings appear on the TV screen.

Example:

When using the PAGE button:

Press PAGE repeatedly to select a desired

still picture.

When using the on-screen bar:

1 Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

2 Press Cursor 3/2repeatedly to select

2 Press Cursor 3/2to highlight

3 Press ENTER.

the VFP mode.

• NORMAL:Normally select this.

• CINEMA: Suitable for movies.

When you select “NORMAL” or “CINEMA”, press VFP to

complete the setting.

Dolby D

2/0 . 0ch

• USER 1 and USER 2:

You can adjust parameters that affect picture

appearance.

4 Press Cursor 5/Yto select the desired

Only when selecting “USER 1” or “USER 2” in step

2, proceed to perform the following operation;

still picture.

5 Press ENTER.

3 Press Cursor Y/5repeatedly to select

6 Press ON SCREEN.

a parameter you want to adjust.

The on-screen bar disappears.

Adjust gradually and confirm picture appearance results are as

preferred.

• GAMMA:

Zooming in

7During playback or while paused

Controls brightness of neutral tints while maintaining

brightness of dark and bright portions.

• BRIGHTNESS:

DVD DVD DVD

VIDEO AUDIO VR

Controls screen brightness.

• CONTRAST:

1 Press ZOOM.

magnification changes.

Each time you press ZOOM, scene

Controls screen contrast.

• SATURATION:

Controls screen color depth.

• TINT:

Controls screen tint.

2 While zoomed in, press Cursor 3/2/Y/

5to move zoom-in area.

• SHARPNESS:

Controls screen sharpness.

To return to normal playback

Press ZOOM repeatedly to select ZOOM OFF.

4 Press ENTER.

NOTE

• The number of the magnification steps varies depending on the disc

Example:

type.

• During slide-show playback of JPEG, zooming in is not available. In

such a case, press 8to pause slide-show playback, then zoom in.

• During DVD AUDIO playback, this feature is available only for the

video part.

5 Press Cursor Y/5to change the

• During playback, there may be a case where Cursor (3/2/Y/5)

does not work in step 2 above.

setting.

6 Press ENTER.

The current VFP settings appear again.

7 Repeat steps 3 to 6 to adjust other

parameters.

8 Press VFP.

NOTE

• Although the setting display disappears in the middle of the

procedure, the setting at that time will be stored.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 21 for button locations.

Advanced operations

3 Press 3(play button).

Program Playback

7While stopped

If all of the programmed tracks/files have been played back,

playback stops and the program window appears again. Note

that program setting remains.

DVD DVD

VIDEO AUDIO

To check the program contents

During playback, press 7. Playback stops and the program window

appears.

1 Press PLAY MODE

repeatedly until program

window appears on the TV screen.

To quit the Program mode

While stopped, press PLAY MODE repeatedly until both program

window and

disappear from the TV screen.

NOTE

• There may be a case where bonus group on a DVD AUDIO cannot be

played.

• The Resume function cannot be used with Program Playback.

• Program Playback may not work for some discs.

USE NUMERIC KEYS TO PROGRAM TRACKS.

USE CANCEL TO DELETE THE PROGRAM.

Random Playback

You can play titles or tracks on a disc in random

order.

2 Follow the instructions that appear on

the TV screen to program the desired

chapters/tracks.

DVD DVD

VIDEO AUDIO

7While stopped

• For details on using the number buttons, see “How to use the

number buttons” (A pg. 19).

• The content’s numbers that you have to specify for

programming varies depending on the disc type:

1 Press PLAY MODE

repeatedly until

appears on the TV screen.

•

DVD VIDEO:

VCD, SVCD, CD:

Titles and chapters

Tracks

2 Press 3(play button).

DVD AUDIO, MP3, WMA:

Groups and tracks

• When more than one discs are loaded, the system starts

Random Playback of the next disc after completing current

disc playback.

• Before you program the tracks in bonus group on a DVD

AUDIO, perform the procedure of “Playing back a bonus

group” (A pg. 20) to turn off the BONUS indicator on the

display window.

To quit Random mode

While stopped, press PLAY MODE repeatedly until both program

• You can specify the chapters/tracks whose number is up to

99.

window and disappear from the TV screen.

You can also clear the Random mode by turning off the system.

• There may be a case that the group or title number can be

entered even for discs that contain no groups or titles. In

such a case, press ENTER to proceed to the Track/Chapter

column.

NOTE

• The same title/track will not be played back more than once during

Random Playback.

• When you press ENTER instead of the number buttons in

the Track/Chapter column, “ALL” appears and all the tracks

or chapters on the selected group or title are programmed as

a step.

To clear the programs one by one from the last

entered number

Press CANCEL repeatedly.

To clear all programs

Press 7.

You can also clear the program by turning off the system.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 21 for button locations.

Advanced operations

When using the on-screen bar (except for MP3/

WMA/JPEG):

Repeat Playback

1 Press ON SCREEN twice.

Repeating the current selection or all

discs

7For DVD VIDEO/DVD VR:

During playback

The on-screen bar appears on the TV screen.

2 Press Cursor 3/2to highlight

3 Press ENTER.

DVD DVD DVD

VIDEO AUDIO VR

Dolby D

2/0 . 0ch

For VCD/SVCD:

During playback without PBC function or

stopped

For DVD AUDIO/CD/MP3/WMA/JPEG:

During playback or stopped

4 Press Cursor Y/5repeatedly to select

When using the REPEAT button:

the Repeat mode.

Press REPEAT.

5 Press ENTER.

: 3

1 2

6 Press ON SCREEN.

To cancel Repeat Playback

Select “OFF” in step 4.

The on-screen bar disappears.

Repeat mode indicator

Each time you press REPEAT, the Repeat mode changes.

Display

window

Repeating a desired part [A-B Repeat]

TV screen

Meanings

You can repeat playback of a desired part by

DVD DVD DVD

Repeats the current group for

DVD AUDIO/MP3/WMA/

JPEG.

specifying the beginning (point A) and ending

(point B).

VIDEO AUDIO VR

REPEAT GROUP

7During playback

Repeats the current title for

DVD VIDEO.

1 Press ON SCREEN twice.

(For DVD VR) Repeats the

current title for Original

program.

The on-screen bar appears on the TV screen.

2 Press Cursor 3/2to highlight

3 Press ENTER.

(For DVD VR) Repeats the

current playlist for Playlist.

Dolby D

2/0 . 0ch

Repeats all titles and tracks on

the current disc for DVD VR/

VCD/SVCD/CD/MP3/WMA/

JPEG.

DISC

4 Press Cursor Y/5repeatedly to select

Repeats all the available discs.

ALL

“A-B”.

REPEAT ALL

5 Press ENTER at the beginning of the

Repeats the current track for

DVD AUDIO/VCD/SVCD/

CD/MP3/WMA.

REPEAT TRACK,

REPEAT STEP

part you want to repeat (point A).

Dolby D

2/0 . 0ch

Repeats the current chapter for

DVD VIDEO/DVD VR.

REPEAT STEP

6 Press ENTER at the end of the part you

A-B Repeat Playback starts.

Repeat mode is off.

The system plays back the disc

normally.

indication

want to repeat (point B).

NOTE

• When DVD VIDEO or DVD AUDIO is loaded in the system,

7 Press ON SCREEN.

The on-screen bar disappears.

playback of the disc next to the DVD VIDEO or DVD AUDIO will

not start, although

To cancel

/REPEAT ALL on the TV screen or

Select “OFF” in step 4, then press ENTER.

ALL in the display window is shown.

• For DVD VIDEO and DVD AUDIO, REPEAT ALL and REPEAT

DISC may not be available depending on the disc.

NOTE

• When playing back a DVD VIDEO/DVD VR, A-B Repeat Playback

is possible only within the same title.

• “A-B” cannot be selected during Program and Random Playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 21 for button locations.

Advanced operations

Sound settings

Tray lock

You can lock the tray and prohibit the unwanted disc ejection.

IMPORTANT

Before using the remote control for the following

operation;

• Set the remote control mode selector to

AUDIO.

On the center unit ONLY:

While the system is turned off

DISC 1

NOTE

Before you start operation;

• There is a time limit when doing the following steps. If the setting is

cancelled before you finish, start from step 1 again.

Press and hold

1 Press SETTING.

• The system turns on and “LOCKED” appears on the display

window.

Example:

• If you try to eject the disc, “LOCKED” appears to indicate that

the tray is locked.

D E

A /

C M

To cancel

Carry out the same operation again.

• The system turns on and “UNLOCKED” appears on the display

window.

2 Press Cursor Y/5to select the item

• DEC (Decode):

you want to set.

When you play an external source (AUX D is selected as a

source) that was encoded with Dolby D or DTS Digital

Surround, the following symptoms may occur;

• No sound comes out at the beginning of playback.

• Noise comes out while searching for or skipping chapters

or tracks.

A/PCM (Auto/PCM):

Normally select this. The system automatically

detects the incoming signals.

DD:

Select this if the symptoms above occur when

playing a disc (or software) encoded with Dolby

DTS:

Select this if the symptoms above occur when

playing a disc (or software) encoded with DTS

Digital Surround.

3 Press Cursor 3/2to make an

adjustment or selection.

Example:

D E

D D

The adjustment is set and the display automatically disappears

a few seconds later.

NOTE

• When “DD” or “DTS” is selected, if a signal encoded with another

digital format comes in, you cannot listen to the sound. (The

GDIGITAL or Cindicator flashes.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting DVD preferences

NOTE

• See the following “The language codes list” for the code of each

Using the setup menus

• You can change the language used in the setup menus. See

“Menu description” below.

language, such as “AA”, etc.

The language codes list

Basic operation on the setup menus

AA Afar

IK Inupiak

IN Indonesian

IS Icelandic

IW Hebrew

RN Kirundi

RO Rumanian

RU Russian

RW Kinyarwanda

SA Sanskrit

SD Sindhi

IMPORTANT

Before using the remote control for the

following operation;

1 Set the remote control mode selector to

AUDIO.

AB Abkhazian

AF Afrikaans

AM Ameharic

AR Arabic

Yiddish

2 Press DVD.

AS Assamese

AY Aymara

AZ Azerbaijani

BA Bashkir

BE Byelorussian

BG Bulgarian

BH Bihari

JW Javanese

KA Georgian

KK Kazakh

SG Sangho

SH Serbo-Croatian

SI Singhalese

SK Slovak

KL Greenlandic

KM Cambodian

KN Kannada

KO Korean (KOR)

KS Kashmiri

Cursor

(3/2/Y/5)/

ENTER

SL Slovenian

SM Samoan

SN Shona

BI Bislama

BN Bengali, Bangla KU Kurdish

SO Somali

BO Tibetan

BR Breton

CA Catalan

CO Corsican

CS Czech

KY Kirghiz

LA Latin

SQ Albanian

SR Serbian

SS Siswati

7While stopped

LN Lingala

LO Laothian

LT Lithuanian

ST Sesotho

SU Sundanese

1 Press SET UP.

CY Welsh

LV Latvian, Lettish SV Swedish

DA Danish

DZ Bhutani

EL Greek

MG Malagasy

MI Maori

SW Swahili

TA Tamil

MK Macedonian

ML Malayalam

MN Mongolian

MO Moldavian

MR Marathi

TE Telugu

TG Tajik

EO Esperanto

ET Estonian

EU Basque

FA Persian

FI Finnish

FJ Fiji

TH Thai

TI Tigrinya

TK Turkmen

TL Tagalog

TN Setswana

TO Tonga

TR Turkish

TS Tsonga

TT Tatar

MS Malay (MAY)

MT Maltese

2 Follow the instructions that appear on

the TV screen.

FO Faroese

FY Frisian

GA Irish

MY Burmese

NA Nauru

NE Nepali

Menu description

GD Scots Gaelic

GL Galician

GN Guarani

GU Gujarati

HA Hausa

NL Dutch

NO Norwegian

OC Occitan

TW Twi

UK Ukrainian

UR Urdu

:Language menu (LANGUAGE)

OM (Afan) Oromo

OR Oriya

UZ Uzbek

VI Vietnamese

WO Wolof

VO Volapuk

XH Xhosa

YO Yoruba

7MENU LANGUAGE

Some DVDs have their own menus in multiple languages.

• Select the initial language*.

HI Hindi

PA Panjabi

HR Croatian

HU Hungarian

HY Armenian

IA Interlingua

IE Interlingue

PL Polish

PS Pashto, Pushto

PT Portuguese

QU Quechua

7AUDIO LANGUAGE

Some DVDs have multiple audio languages.

• Select the initial audio language*.

RM Rhaeto-Romance ZU Zulu

7SUBTITLE

Some DVDs have multiple subtitle languages.

• Select the initial subtitle language*.

7ON SCREEN LANGUAGE

• Select the language shown on the TV screen when operating this

system.

* When the language you have selected is not recorded to a disc,

the original language is automatically used as the initial

language.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting DVD preferences

:Audio menu (AUDIO)

7D. RANGE COMPRESSION

(Dynamic range compression)

You can enjoy low level recorded sound clearly at night even at a

low volume when listening to the sound with Dolby Digital.

• AUTO

:Picture menu (PICTURE)

7MONITOR TYPE

You can select the monitor type to match your TV when you play

DVDs recorded in the picture’s height/width ratio of 16:9.

• 16:9 (Wide television conversion)

Select this when the aspect ratio of your TV is fixed on 16:9

(wide TV).

When you play DVDs recorded in the picture’s height/width

ratio of 4:3, the system adjust the ratio of output signal

automatically.

Select this when you want to enjoy surround sound with its

full dynamic range (no effect applied).

• ON

Select this when you want to fully apply the compression

effect (useful at midnight).

• 4:3 LB (Letter Box conversion)

Select this when the aspect ratio of your TV is 4:3

(conventional TV). While viewing a wide screen picture, the

black bars appear on the top and the bottom of the screen.

• 4:3 PS (Pan Scan conversion)

Select this when the aspect ratio of your TV is 4:3

(conventional TV). While viewing a wide screen picture, the

black bars do not appear, however, the left and right edges of

the pictures will not be shown on the screen.

NOTE

• When you play a multichannel Dolby Digital source with the

surround mode is off, the setting of D. RANGE COMPRESSION is

set to ON automatically.

Ex.: 16:9

Ex.: 4:3 LB

Ex.: 4:3 PS

NOTE

• Even if “4:3 PS” is selected, the screen size may become “4:3 LB”

with some DVDs. This depends on how DVDs are recorded.

7PICTURE SOURCE

When you set the scan mode to “PROGRESS” (A pg. 15), you can

obtain optimal picture quality by selecting whether the content on

the disc is processed by frame (film source) or by field (video

source) .

Normally set to “AUTO”.

• AUTO

Used to play a disc containing both video and film source

materials.

This system recognizes the source type (video or film) of the

current disc according to the disc information.

• If the playback picture is unclear or noisy, or the oblique

lines of the picture are rough, try to change to other modes.

• FILM

Suitable for playing back a film source disc.

• VIDEO

Suitable for playing back a video source disc.

7SCREEN SAVER (A pg. 19)

You can activate or deactivate Screen Saver function.

7FILE TYPE

When several types of files are recorded on a disc, you can select

which files to play.

• AUDIO

Select this to play MP3/WMA files.

• STILL PICTURE

Select this to play JPEG files.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting DVD preferences

:Speaker setting menu

(SPK. SETTING)

:Other setting menu (OTHERS)

7RESUME

You can activate or deactivate Resume Playback function.

7Level menu (LEVEL)

(A pg. 26)

FRONT LEFT SPEAKER/FRONT RIGHT SPEAKER/

CENTER SPEAKER/SURROUND RIGHT SPEAKER/

SURROUND LEFT SPEAKER

7ON SCREEN GUIDE

You can activate or deactivate the on-screen guide icons.

(A pg. 17)

While monitoring the test tone, adjust the output level of the

speakers.

TEST TONE*

Outputs the test tone.

* The test tone comes out of all of the activated speakers in the

following sequence:

sFront left speaker sCenter speaker sFront right

speaker sSurround right speaker sSurround left

speaker s(back to the beginning)

7Delay menu (DELAY)

Example:

Center

speaker

1 ms

Subwoofer

Front right

0 ms

Front left

0 ms

Surround left

2 ms

Surround right

2 ms

In this case, set the delay time of each speaker as follows;

• Delay time of front speakers: 0 ms

• Delay time of center speaker: 1 ms

• Delay time of surround speakers: 2 ms

FRONT LEFT SPEAKER/FRONT RIGHT SPEAKER/

CENTER SPEAKER/SURROUND RIGHT SPEAKER/

SURROUND LEFT SPEAKER

Adjust the distance from the listening position to the speakers.

Within the range from 0 ms to 15 ms. (by 1 ms)

7Subwoofer menu (SUBWOOFER)

LEVEL

You can set the output level of the subwoofer in the -6 dB to +6 dB

range.

CROSS OVER

The signals below the preset frequency level will be sent to and be

reproduced by the subwoofer.

Select one of the cross over frequency levels according to the bass

sound quality from the front/center/surround speakers.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuner operations

IMPORTANT

Before using the remote control for the

following operation;

1 Set the remote control mode selector to

AUDIO.

Preset tuning

Once a station is assigned to a channel number, the station can be

quickly tuned in. You can preset 30 FM and 15 AM stations.

2 Press FM/AM.

7 To preset the stations

NOTE

• When FM or AM is selected as the source, you can select All Channel

1 Tune in the station you want to preset.

• If you want to store the FM reception mode for an FM

station, select the reception mode you want. See “Selecting

the FM reception mode” (A pg. 36).

Stereo (ALL ST) and SURR OFF mode.

The buttons described below are used on pages 35 to 38.

Example:

FM/AM

When the system is tuned in to 103.5 MHz.

MHz

1 0 3 5 0

AUDIO

Remote control

mode selector

TUNING

2 Press MEMORY.

MEMORY

FM MODE

MHz

_CH_ _

5 0

1 0 3

While “CH” and “– –” are flashing:

3 Press number button(s) (1-10, +10) to

select a preset number you want.

• For details on using the number buttons, see “How to use the

number buttons” (A pg. 19).

Number buttons

Example:

When the preset channel 1 is selected.

MHz

3 5 0

TA/NEWS/INFO

PTY SEARCH

If the setting is cancelled before you finish, start from step 2

again.

PTY SEARCH

While the selected number is flashing:

4 Press MEMORY.

Manual tuning

The selected number stops flashing.

The station is assigned to the selected preset number.

If the setting is cancelled before you finish, start from step 2

again.

1 Press FM/AM repeatedly to select the

band.

Example:

5 Repeat steps 1 to 4.

stored one.

When the system is tuned in to 810 kHz.

• Storing a new station to a used number erases the previously

0 _kHz

7 To tune in to a preset station

1 Press FM/AM repeatedly to select FM or

2 Press TUNING 9/(repeatedly until

AM.

you find the frequency you want.

When you hold down the button until the system starts

searching for stations and then release it, the system stops

searching automatically when a station of sufficient signal

strength is tuned in to.

2 Press number button(s) (1-10, +10) to

select a preset number.

• For details on using the number buttons, see “How to use the

number buttons” (A pg. 19).

NOTE

• When an FM stereo program is received, the ST indicator lights on the

display window.

NOTE

• You can also select a preset number by pressing y /1.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 35 for button locations.

Tuner operations

With the system, you can receive the following types of RDS

signals:

Selecting the FM

reception mode

When the stereo FM program currently tuned in is noisy, you can

PS (Program Service):

PTY (Program Type):

RT (Radio Text):

Shows commonly known station names.

Shows types of broadcast programs.

Shows text messages the station sends.

Enhanced Other Network: See page 38.

change the FM reception mode to improve the reception.

7While listening to an FM station

NOTE

• RDS is not available for AM (MW) broadcasts.

Press FM MODE.

The FM reception mode appears on the display window.

Each time you press the button, the FM reception mode changes.

• AUTO:

• RDS may not operate correctly if the station tuned is not transmitting

RDS signal properly or if the signal strength is weak.

IMPORTANT

Before using the remote control for the

following operation;

1 Set the remote control mode selector to

AUDIO.

When a program is broadcast in stereo, you will hear stereo

sound. (The ST indicator lights on the display window.) When in

monaural, you will hear monaural sound. This mode is also

useful to suppress static noise between stations.

• MONO:

Reception will be improved although you will lose the stereo

effect. (The MONO indicator lights on the display window.) In

this mode, you will hear noise until you are tuned in to a station.

2 Press FM/AM.

7 To show the RDS signals

information

Press FL DISP. while listening to an FM

station.

Each time you press the button, the indication on the display

Reducing the noise of AM

(MW) broadcast

When listening to an AM (MW) broadcast with a lot of noise

interference, you can change the Beat Cut mode to reduce the

noise.

window changes.

PS (Program Service):

While searching, “PS” appears and then the station names will be

displayed. “NO PS” appears if no signal is sent.

PTY (Program Type):

7While listening to an AM (MW) station

Press FM MODE.

While searching, “PTY” appears and then the type of the broadcast

program will be displayed. “NO PTY” appears if no signal is sent.

RT (Radio Text):

The current Beat Cut mode appears on the display window.

Each time you press the button, the Beat Cut mode changes.

• Choose “BEATCUT1” or “BEATCUT2” according to which

gives clearer sound.

While searching, “RT” appears and then text messages the station

sends will be displayed. “NO RT” appears if no signal is sent.

Frequency:

Station frequency (non-RDS service).

Using the RDS (Radio

Data System) when

receiving FM stations

About characters shown on the display window

When PS, PTY, or RT signals appear on the display window, some

special characters and marks may not be displayed correctly.

NOTE

• If searching finishes at once, “PS”, “PTY”, and “RT” will not appear

on the display window.

RDS allows FM stations to send an additional signal along with

their regular program signals. For example, the stations send their

station names, as well as information about what type of program

they broadcast, such as sports or music, etc.

When tuned in to an FM station which provides the RDS service,

the RDS indicator lights up on the display window.

MHz

1 0 3 5 0

RDS

RDS indicator

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 35 for button locations.

Tuner operations

Description of the PTY codes

Searching for a program by PTY codes

One of the advantages of the RDS service is that you can locate a

particular kind of program from the preset channels (A pg. 35) by

specifying the PTY codes.

NEWS:

News.

AFFAIRS:

Topical program expanding or enlarging upon

the news — debate, or analysis.

INFO:

Programs the purpose of which is to impart

advice in the widest sense.

7 To search for a program using the PTY codes

SPORT:

Programs concerned with any aspect of sports.

Educational programs.

NOTE

Before you start operation;

• The PTY Search is only applicable to preset stations.

• To stop searching any time during the process, press PTY SEARCH

while searching.

EDUCATE:

DRAMA:

CULTURE:

All radio plays and serials.

Programs concerning any aspect of national or

regional culture, including language, theater,

etc.

• There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step 1 again.

SCIENCE:

VARIED:

Programs about natural sciences and

technology.

1 Press PTY SEARCH while listening to

“PTY” and “SELECT” flashes alternately on the display

window.

Used for mainly speech-based programs such as

quizzes, panel games and personality

interviews.

an FM station.

POP M:

Commercial music of current popular appeal.

Rock music.

7While “PTY” and “SELECT” is flashing alternately:

ROCK M:

EASY M:

2 Press PTY 9or PTY (until the PTY

Current contemporary music considered to be

“easy-listening”.

code you want appears on the display

window.

• For details, see “Description of the PTY codes”.

LIGHT M:

Instrumental music, and vocal or choral works.

CLASSICS:

Performances of major orchestral works,

symphonies, chamber music, etc.

While the PTY code selected in step 2 is still on the display

window:

OTHER M:

Music not fitting into any of the other

categories.

WEATHER:

FINANCE:

CHILDREN:

SOCIAL:

Weather reports and forecasts.

3 Press PTY SEARCH again.

Stock Market reports, commerce, trading etc.

Programs targeted at a young audience.

While searching, “SEARCH” and the selected PTY code

alternate on the display window.

The system searches 30 preset FM stations, stops when it finds

the one you have selected, and tunes in that station.

Programs about sociology, history, geography,

psychology and society.

To continue searching after the first stop

Press PTY SEARCH again while the indications on the display

window are flashing.

RELIGION:

PHONE IN:

Religious programs.

Involving members of the public expressing

their views either by phone or at a public forum.

If no program is found, “NO FOUND” appears on the display

window.

TRAVEL:

LEISURE:

JAZZ:

Travel information.

Programs about recreational activities.

Jazz music.

COUNTRY:

Songs which originate from, or continue the

musical tradition of the American Southern

States.

NATION M:

OLDIES:

Current popular music of the nation or region in

that country’s language.

Music from the so-called “golden age” of

popular music.

FOLK M:

Music which has its roots in the musical culture

of a particular nation.

DOCUMENT: Programs concerning factual matters, presented

in an investigative style.

TEST:

Broadcasts for testing emergency broadcast

equipment or unit.

ALARM:

NONE:

Emergency announcement.

No program type, undefined program, or

difficult to categorize into particular types.

NOTE

• Classification of the PTY codes for some FM stations may be

different from the above list.

Download from Www.Somanuals.com. All Manuals Search And Download.

See page 35 for button locations.

Tuner operations

The TEST signal is used for equipment test — whether it

can receive the Alarm signal correctly

Switching to broadcast program of your

choice temporarily

The TEST signal makes the system work in the same way as the

Alarm signal does. If the TEST signal is received, the system

automatically switches to the station broadcasting the TEST signal.

While receiving the TEST signal, “TEST” appears on the display

window.

Another convenient RDS service is called “Enhanced Other

Network”.

This allows the system to switch temporarily to a broadcast

program of your choice (TA, NEWS, and/or INFO) from a different

station except in the following cases;

• When you are listening to non-RDS stations (all AM – MW

stations, some FM stations and other sources).

• When the system is in standby mode.

7 How the Enhanced Other Network function actually

works

Case 1

If there is no station broadcasting the program you have

selected

NOTE

Before you start operations;

• The Enhanced Other Network function is only applicable to preset

The system continues tuning in to the current station.

‘

stations.

When a station starts broadcasting the program you have selected,

the system automatically switches to the station. The indicator of

received PTY code starts flashing.

IMPORTANT

Before using the remote control for the

following operation;

1 Set the remote control mode selector to

AUDIO.

‘

When the program is over, the system goes back to the previously

tuned station, but the Enhanced Other Network function still

remains activated.

2 Press FM/AM.

Press TA/NEWS/INFO

Case 2

If the FM station you are listening to is broadcasting the

program you have selected

repeatedly until the program type indicator

(TA/NEWS/INFO) you want appears on the

display window.

Each time you press the button, the indicator on the display window

changes.

The system continues to receive the station but the indicator of

received PTY code starts flashing.

‘

When the program is over, the indicator of received PTY code stops

flashing and remains lit, but the Enhanced Other Network function

still remains activated.

MHz

1 0 3 5 0

TA NEWS INFO

NOTE

The program type indicator

Traffic Announcement in your area.

• In Enhanced Other Network standby mode, if you change the source

to play, Enhanced Other Network standby mode is canceled

temporarily.

TA:

NEWS: News.

If you change the source to FM again, the system returns to

Enhanced Other Network standby mode.

INFO: Program the purpose of which is to impart advice in the

widest sense.

• Enhanced Other Network data sent from some stations may not be

compatible with this system.

To stop listening to the program selected by Enhanced

Other Network

• Enhanced Other Network does not function for some FM stations

with RDS service.

Press TA/NEWS/INFO repeatedly again so that the program type

indicator (TA/NEWS/INFO) goes off from the display window. The

system exits from Enhanced Other Network standby mode and goes

back to the previously selected station.

• While listening to a program tuned in by the Enhanced Other Network

function, the station does not change even if another network station

starts broadcasting a program of the same Enhanced Other Network

data.

• While listening to a program tuned in by the Enhanced Other

Network function, you can only use TA/NEWS/INFO and FL

DISP. as the tuner operation buttons.

When an emergency broadcast (ALARM signal) is sent

from an FM station

The system automatically tunes in to the station and “ALARM”

appears on the display window while the system receiving the

emergency broadcast.

Note that an emergency broadcast cannot be received in the

following cases;

• When you are listening to non-RDS stations (all AM – MW

stations, some FM stations and other sources).

• When the system is in standby mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

References

To clean the disc

Wipe the disc with a soft cloth in a straight line

from center to edge.

• DO NOT use any solvent — such as

conventional record cleaner, spray,

thinner or benzine — to clean the disc.

Maintenance

7 Handling Discs

• Remove the disc from its case by holding it at

the edge while pressing the center hole lightly.

• Do not touch the shiny surface of the disc or

bend the disc.

7 Cleaning the system

• Stains on the system should be wiped off with a soft cloth. If the

system is heavily stained, wipe it with a cloth soaked in water-

diluted neutral detergent and wrung well, then wipe clean with a

dry cloth.

• Put the disc back in its case after use to

prevent warping.

• Be careful not to scratch the surface of the

disc when placing it back in its case.

• Avoid exposure to direct sunlight, temperature

extremes and moisture.

• Since the system may deteriorate in quality, become damaged or

get its paint peeled off, be careful about the following.

•

DO NOT wipe it with a hard cloth.

DO NOT wipe it strong.

DO NOT wipe it with thinner or benzine.

DO NOT apply any volatile substance such as insecticides to it.

DO NOT allow any rubber or plastic to remain in contact with

it for a long time.

Troubleshooting

PROBLEM

POSSIBLE CAUSE

SOLUTION

Power does not come

on.

The power cord and/or system cord is not connected.

Connect the power cord and system cord correctly.

(A pg. 10)

The remote control does The batteries are exhausted.

not work.

Replace the batteries. (A pg. 6)

Sunlight is falling directly on the remote sensor.

Hide the remote sensor from direct sunlight.

No sound.

The system cord and/or speaker cord is not connected. Check the connection.

The audio cord is not connected to AUX IN and/or

DIGITAL IN correctly.

Connect the cord correctly. (A pg. 10)

An incorrect source has been selected.

The decode mode is not set correctly.

Select the correct source. (A pg. 14)

Select the proper decode mode. (A pg. 31)

Connect the cord correctly. (A pg. 9)

Use a playable disc. (A pg. 3)

No picture is displayed The video cord is not connected correctly.

on the TV screen.

The disc is not playable.

No picture is displayed The scan mode is set to “PROGRESS” though the

on the TV screen, the center unit is connected to the TV which does not

picture is blurred, or the support the progressive video input such as a

Change the scan mode to “RGB” or “Y/C”. (A pg. 15)

picture is divided into

two parts.

conventional TV.

Video and audio are

distorted.

The disc is scratched or dirty.

Replace or clean the disc.

A VCR is connected between the center unit and the

TV.

Connect the center unit and TV directly. (A pg. 9)

The picture does not fit The monitor type is not set correctly.

the TV screen.

Set “MONITOR TYPE” properly. (A pg. 33)

Hard to listen to

broadcast because of

noise.

Antennas are disconnected.

Reconnect the antennas correctly and securely.

(A pg. 7)

Download from Www.Somanuals.com. All Manuals Search And Download.

References

7 Subwoofer (SP-PWC3)

Amplifier section

Specifications

Front:

140W per channel, RMS at 4 C at

1 kHz, with 10% total harmonic

distortion.

Audio section

Center unit (XV-THC3)

Center/Surround:

Subwoofer:

130W per channel, RMS at 4 C at

1 kHz, with 10% total harmonic

distortion.

Total Harmonic Distortion 0.02 %

NOTE: This value is measured at System cord CONNECTOR for

reference.

Digital input*¹:

140 W, RMS at 4 C at 100 Hz, with

10% total harmonic distortion.

DIGITAL IN:

(OPTICAL)

* Corresponding to Linear PCM, Dolby Digital, and DTS Digital

–21 dBm to –15 dBm

(660 nm E30 nm)

Speaker section

Speaker unit:

Power Handling Capacity: 140 W

16 cm Bass-reflex

Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz)

Video section

Video System:

Impedance:

Frequency Range:

4 C

30 Hz to 200 Hz

PAL

Horizontal Resolution:

Signal-to-Noise Ratio:

(Composite signal when “RGB” is selected)

500 lines

64 dB

General

Power Requirements:

Power Consumption:

AC 230 V

, 50 Hz

135 W (at operation)

0 W (in standby mode)

Video output level

Composite:

S-video-Y:

S-video-C:

1.0 V(p-p)/75 C

0.3 V(p-p)/75 C

1.0 V(p-p)/75 C

0.7 V(p-p)/75 C

Dimensions (W MH MD):

169 mm M411 mm M459 mm

11.3 kg

Mass:

Component-Y:

Component-P^B/PR:

RGB:

7 Satellite Speakers — SP-XTHC3

Front speakers (SP-THC3F)

Tuner section

Tuning Range

FM:

Speaker unit:

8.0 cm cone

1.5 cm dome

Bass-reflex, Magnetically Shielded

87.50 MHz to 108.00 MHz

522 kHz to 1 629 kHz

AM (MW):

Power Handling Capacity: 140 W

General

Power Requirements:

Power Consumption:

Impedance: 4 C

Frequency Range: 80 Hz to 20 kHz

Dimensions (W MH MD):

AC 230 V , 50 Hz

19 W (at operation)

1.4 W (in standby mode)

104.5 mm M139 mm M101 mm

0.56 kg each

Dimensions (W MH MD):

Mass:

400 mm M85 mm M399 mm

4.2 kg

Center speaker (SP-THC3C)

Speaker unit: 8.0 cm cone

1.5 cm dome

Mass:

Bass-reflex, Magnetically Shielded

Power Handling Capacity: 140 W

Impedance: 4 C

Frequency Range: 80 Hz to 20 kHz

Dimensions (W MH MD):

137 mm M105 mm M104.5 mm

0.57 kg

Mass:

Surround speakers (SP-THC3S)

8.0 cm cone

Bass-reflex

Speaker unit:

Power Handling Capacity: 140 W

Impedance: 4 C

Frequency Range: 80 Hz to 20 kHz

Dimensions (W MH MD):

111.5 mm M148 mm M106.5 mm

0.56 kg each

Mass:

Designs & specifications are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

0405TMMMDWJEM

Download from Www.Somanuals.com. All Manuals Search And Download.

JBL Speaker SS88IWS User Manual
John Deere Cultivator OMM147682 B2 User Manual
Jura Capresso Coffeemaker IMPRESSA E50 User Manual
JVC CD Player KD DV5400 User Manual
JVC Speaker SP XF51F User Manual
JVC VCR HR DD858EH User Manual
Kambrook Hot Beverage Maker KQK600 User Manual
Kenmore Range 790 9021 User Manual
Kenwood Two Way Radio TKR 7400S User Manual
KitchenAid Coffee Grinder 4KPCG100PM0 User Manual