JVC Home Theater System LVT1148 010A User Manual

DVD DIGITAL CINEMA SYSTEM  
Consists of XV-THS8, SP-PWS8, SP-THS9F,  
SP-THS9C and SP-THS9S  
Consists of XV-THS5, SP-PWS5, SP-THS5F,  
SP-THS5C and SP-THS7S  
INSTRUCTIONS  
LVT1148-010A  
[US, UB, UG, A]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings, Cautions and Others  
Caution: Proper Ventilation  
To avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surface. The minimal clearances are  
shown below:  
Wall or obstructions  
Wall or  
obstructions  
8 cm  
XV-THS8/  
3 cm XV-THS5  
Front  
XV-THS8/XV-THS5  
3 cm  
10 cm  
No  
obstructions  
15 cm  
Wall or obstructions  
Wall or  
obstructions  
20 cm  
SP-PWS8/  
SP-PWS5  
Front  
SP-PWS8/SP-PWS5  
No  
15 cm  
15 cm  
15 cm  
obstructions  
G-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the subtitle ..........................................................29  
Random Playback ...............................................................33  
Speaker layout ....................................................................12  
Hong Kong and Australia) ...................................................13  
Menu description ................................................................36  
Turning off the sound temporarily [MUTING] .....................17  
Adjusting the brightness of the indications [DIMMER] .......17  
Sleep Timer [SLEEP] ...........................................................18  
Adjusting the output level of the subwoofer and center/  
surround speakers [SUBWFR, CENTER, SURR L/R] ...........18  
Adjusting the treble sound [TREBLE] ..................................18  
Changing the scan mode ....................................................18  
Optimizing the speaker settings [Smart Surround Setup] ...19  
Setting the AM tuner interval spacing .................................39  
AV COMPU LINK remote control  
system ...........................................41  
References ....................................42  
Maintenance .......................................................................42  
Troubleshooting ..................................................................42  
Specifications .....................................................................43  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
7 Safety precautions  
Notes on handling  
7 Important cautions  
Avoid moisture, water and dust  
Do not place the system in moist or dusty places.  
Avoid high temperatures  
Do not expose the system to direct sunlight and do not place it near  
a heating device.  
Installation of the system  
Select a place which is level, dry and neither too hot nor too cold;  
between 5°C and 35°C.  
When you are away  
When away on travel or for other reasons for an extended period of  
time, disconnect the power cord plug from the wall outlet.  
Leave sufficient distance between the system and the TV.  
Do not use the system in a place subject to vibration.  
Power cord  
Do not block the vents  
Blocking the vents may damage the system.  
Do not handle the power cord with wet hands!  
A small amount of power is always consumed while the power  
cord is connected to the wall outlet (center unit only).  
When unplugging the power cord from the wall outlet, always  
pull on the plug, not the power cord.  
Care of the cabinet  
When cleaning the system, use a soft cloth and follow the relevant  
instructions on the use of chemically-coated cloths. Do not use  
benzene, thinner or other organic solvents including disinfectants.  
These may cause deformation or discoloring.  
To prevent malfunctions of the system  
There are no user-serviceable parts inside. If anything goes  
wrong, unplug the power cord and consult your dealer.  
Do not insert any metallic object into the system.  
Do not use any non-standard shape disc (like a heart, flower or  
credit card, etc.) available on the market, because it may damage  
the system.  
If water gets inside the system  
Turn the system off and disconnect the power cord plug from the  
wall outlet, then call the store where you made your purchase.  
Using the system in this condition may cause fire or electrical  
shock.  
Do not use a disc with tape, stickers, or paste on it, because it  
may damage the system.  
Label sticker  
Supplied accessories  
Check to be sure you have all of the supplied accessories.  
The number in parentheses is the quantity of the pieces supplied.  
If anything is missing, contact your dealer immediately.  
Sticker  
Paste  
Remote control (1)  
Batteries (2)  
FM antenna (1)  
Note about copyright laws  
AM loop antenna (1)  
Power cord (1)  
Check the copyright laws in your country before recording from the  
discs. Recording of copyrighted material may infringe copyright  
laws.  
System cord (1)  
Composite video cord (1)  
Note about copyguard system  
Speaker cords  
For satellite (front left/right) and center speakers (3)  
For satellite speakers (surround left/right) (2)  
The discs are protected by copyguard system. When you connect  
the system to your VCR directly, the copyguard system activates  
and the picture may not be played back correctly.  
Screws (TH-S8 only)  
M5 x 25 mm:  
For satellite speakers (8)  
AC plug adaptor (2) (except for Hong Kong and Australia)  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
About discs  
The following discs cannot be played back:  
DVD-ROM, DVD-RAM, SACD, CD-ROM, CD-I (CD-I Ready),  
Photo CD, etc.  
Playable disc types  
Playing back these discs will generate noise and damage the  
speakers.  
• On some DVD VIDEOs, DVD AUDIOs, VCDs or SVCDs,  
their actual operation may be different from what is  
explained in this manual. This is due to the disc  
programming and disc structure, not a malfunction of this  
system.  
This system has been designed to play back the following discs:  
DVD VIDEO, DVD AUDIO, Video CD (VCD), Super Video CD  
(SVCD), Audio CD (CD), CD-R and CD-RW.  
This system accommodates the NTSC and PAL system. When  
you play an NTSC disc with the scan mode set to PAL”  
(A pg. 18), the NTSC video signal is converted to the PAL60  
signal and output.  
This system can also play MP3, WMA, JPEG and MPEG4 files  
recorded on CD-Rs and CD-RWs. (A pg. 20)  
This system can also play finalized DVD-R/-RWs recorded in  
DVD VIDEO format. However, some discs may not be played  
because of their disc characteristics or recording conditions.  
Notes on CD-R and CD-RW  
User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can  
be played back only if they are already finalized.  
This system can play CD-Rs or CD-RWs recorded on a personal  
computer if they have been recorded in the audio CD format.  
This system can also play CD-Rs or CD-RWs if MP3, WMA,  
JPEG or MPEG4 files are recorded on them.  
However, some discs may not be played back because of their  
disc characteristics, recording conditions, or damage or stain on  
them.  
Discs you can play:  
DVD VIDEO  
CD  
Especially, the configuration and characteristics of an MP3,  
WMA, JPEG or MPEG4 disc are determined by the writing  
(encoding) software and hardware used for recording. Therefore,  
due to the software and hardware used, the following symptoms  
may occur:  
DVD AUDIO  
CD-R  
Some discs may not be played back.  
Some tracks on an MP3 or WMA disc may be skipped or may  
not be played back normally.  
VCD  
CD-RW  
Some files on a JPEG or MPEG4 disc may be played back  
distortedly.  
Before playing back CD-Rs or CD-RWs, read their instructions  
or cautions carefully.  
CD-RWs may require a longer readout time. This is caused by  
the fact that the reflectance of CD-RWs is lower than that of  
regular CDs.  
SVCD  
DVD Logo is a trademark of DVD Format/Logo Licensing  
Corporation.  
Region code of DVD VIDEO  
DVD VIDEO players and DVD VIDEO discs have their own  
Region Code numbers. This system can play back DVD VIDEO  
discs whose Region Code numbers include the systems Region  
Code, which is indicated on the rear panel.  
Example of playable DVD:  
For Australia  
For Middle East  
Except for Australia and Middle East  
If a DVD with an improper Region Code number is loaded,  
REGION CODE ERROR!appears on the TV screen and  
playback cannot start.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
About discs  
Notes on MP3/WMA/JPEG/MPEG4 discs  
MP3/WMA/JPEG/MPEG4 discs (either CD-R or CD-RW)  
require a longer readout time. (It differs due to the complexity of  
the directory/file configuration.)  
Notes on JPEG discs only  
We recommend to record a file at 640 x 480 resolution. (If a file  
has been recorded at a resolution of more than 640 x 480, it will  
take a longer time to be displayed.)  
When making an MP3/WMA/JPEG/MPEG4 disc, select ISO  
9660 Level 1 or Level 2 for the disc format.  
This system can only play baseline JPEG files.  
Some files on a JPEG disc may be played back distortedly.  
This system supports multi-sessiondiscs (up to 20 sessions).  
This system cannot play packet writediscs.  
The system can only play MP3/WMA/JPEG/MPEG4 files with  
the following file extensions;  
Notes on MPEG4 disc only  
The system supports the types of simple profile as MPEG4 files  
(MPEG4 SP).  
The system supports MPEG4 files recorded with the maximum  
bit rate of 384 kbps and an audio codec of G.726. (To play the  
MPEG4 file, it is required that G.726 formatted audio data is  
contained in that file.)  
The maximum size of the played picture is at a 352 x 288 pixel  
resolution (CIF).  
MP3:  
.MP3, .Mp3, .mP3and .mp3”  
WMA: .wma, .WMAand any uppercase and lowercase  
combination (such as .Wma)  
JPEG: .jpg, .jpeg, .JPG, .JPEGand any uppercase and  
lowercase combination (such as .Jpg)  
MPEG4: .asf, .ASFand any uppercase and lowercase  
combination (such as .Asf)  
Some files may be skipped or may not be played normally.  
If different type of files (audio (MP3/WMA), still picture  
(JPEG), and video (MPEG4) files) are recorded on a disc, set the  
FILE TYPE setting in the PICTURE menu to the appropriate  
setting for the data to be read. (A pg. 37)  
The system recognizes up to 150 tracks (files) per group, 99  
groups per disc, and the total number of the tracks (files) that the  
system can play is 1000. For example, if you set FILE TYPE to  
AUDIO (A pg. 37) and play a disc that contains 500 MP3 tracks,  
200 JPEG files, and 600 WMA tracks, the system can play 500  
MP3 tracks and the first 500 of 600 WMA tracks.  
Some MP3/WMA/JPEG/MPEG4 discs may not be played back  
normally because of their disc characteristics or recording  
conditions.  
Notes on MP3/WMA discs only  
The system supports MP3 files recorded with a bit rate of 32 –  
320 kbps and a sampling frequency of 16 kHz, 22.05 kHz,  
24 kHz*, 32 kHz, 44.1 kHz, or 48 kHz.  
If the tag information (album name, artist, and track title, etc.) is  
recorded on a disc, it appears in the file control display on the TV  
screen. (A pg. 28)  
We recommend to record each piece of material (song) at a  
sample rate of 44.1 kHz and at a data transfer rate of  
128 (96*) kbps.  
Some tracks may be skipped or may not be played back  
normally.  
* For WMA only  
This product incorporates copyright protection technology  
that is protected by method claims of certain U.S. patents  
and other intellectual property rights owned by Macrovision  
Corporation and other rights owners. Use of this copyright  
protection technology must be authorized by Macrovision  
Corporation, and is intended for home and other limited  
viewing uses only unless otherwise authorized by  
Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES  
WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED,  
EXCEPT FOR USE BY A CONSUMER ENGAGING IN  
PERSONAL AND NON-COMMERCIAL ACTIVITIES.  
“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH  
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE  
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE  
DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625  
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS  
RECOMMENDED THAT THE USER SWITCH THE  
CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT.  
IF THERE ARE QUESTIONS REGARDING OUR TV SET  
COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD  
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE  
CENTER.”  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
The illustrations of the center unit and the subwoofer used in this manual are of TH-S8 unless otherwise noted.  
Front panel (center unit)  
Display window  
pg. 25 pg. 40  
pg. 25  
pg. 31  
pg. 21  
pg. 21  
pg. 21  
pg. 21  
pg. 21  
pg. 39  
pg. 40  
pg. 33  
pg. 18  
pg. 23 pg. 39  
pg. 16  
pg. 20  
pg. 20  
pg. 20  
Disc tray (inside): pg. 20  
pg. 17  
STANDBY  
VOLUME  
PHONES  
Remote sensor: pg. 7 pg. 16  
pg. 17  
pg. 17  
Rear panel (center unit)  
pg. 41  
pg. 12  
pg. 13  
pg. 13  
OPTICAL  
VIDEO  
OUT  
VCR IN  
ANTENNA  
AM LOOP  
LEFT  
COMPONENT VIDEO OUT  
Y
PB  
PR  
RIGHT  
DIGITAL  
IN  
(DBS)  
FM 75  
AM EXT  
AC IN  
COAXIAL  
AUDIO IN  
(VCR)  
AV COMPU  
LINK-  
S-VIDEO  
pg. 12  
pg. 13 pg. 12  
pg. 8  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Description of parts and controls  
Powered subwoofer  
SP-PWS8/SP-PWS5  
Do not block the  
ventilation openings.  
pg. 12  
pg. 10  
pg. 13  
(except for Hong Kong  
and Australia)  
POWER ON lamp:  
pg. 16  
Power cord:  
pg. 13  
Rear  
Front  
NOTE  
For safety reasons, always ensure that there is sufficient space behind  
the powered subwoofer.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
OPEN/CLOSE  
F AUDIO  
VCR/DBS  
DBS  
pg. 16  
pg. 14  
pg. 15  
pg. 20  
pg. 14  
TV/VIDEO MUTING  
TV  
pg. 17  
DVD  
FM/AM  
VCR  
pg. 17  
R6P (SUM-3)/AA (15F)  
type dry-cell batteries  
(supplied)  
AUDIO SUBTITLE SURR. FL DISP.  
pg. 21  
pg. 25  
pg. 17  
pg. 30  
pg. 29  
CHANNEL AUDIO VOL  
AUDIO  
TV  
pg. 14  
pg. 14  
pg. 14 – 39  
pg. 20  
VCR/DBS  
TUNING  
TUNING  
pg. 22, 39  
MEMORY  
FM MODE  
pg. 22  
pg. 27  
MENU  
pg. 27  
pg. 20,  
40  
pg. 20, 40  
If the range or effectiveness of the remote control decreases,  
replace both batteries.  
ENTER  
pg. 18, 36  
ON  
CAUTION  
SCREEN  
REC  
Do not expose batteries to heat or flame.  
pg. 25  
pg. 15,  
22  
ANGLE  
ZOOM  
pg. 23  
pg. 29  
control  
Number  
buttons:  
pg. 22  
Aim the remote control directly to the front panel of the center unit.  
pg. 31  
pg. 31  
pg. 33  
pg. 34  
pg. 36  
pg. 35  
100+  
Do not hide the remote sensor.  
REPEAT A-B RPT PLAY MODE CANCEL  
pg. 32  
pg. 32, 33  
SETUP SETTING SCAN MODE RETURN  
VFP  
pg. 27  
pg. 18, 31  
TREBLE  
pg. 17  
pg. 18  
SMART  
SLEEP DIMMER S.SETUP  
pg. 18  
pg. 19  
pg. 18  
S.WFR CENTER  
L-SURR.-R  
pg. 18  
pg. 18  
NOTE  
To use the buttons  
under the cover, slide  
down the cover.  
TITLE/GROUP  
ANGLE  
ZOOM  
PAGE  
TV RETU
100+  
REPEAT -
SLETUP  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Do not connect the power cord until all other connections have been made.  
Connections  
If reception is poor  
Connecting the FM and  
AM antennas  
Center unit  
AM loop antenna  
7 AM loop antenna  
Setting up supplied AM loop antenna  
Outdoor single vinyl-covered wire antenna  
(not supplied)  
If the antenna cord is covered with the insulation  
coat, twist and pull the insulation coat off and  
remove.  
7 FM antenna  
FM antenna (supplied)  
Center unit  
Extend the supplied FM antenna  
horizontally.  
Connecting AM loop antenna  
1
Center unit  
If reception is poor  
Center unit  
Outdoor FM antenna  
(not supplied)  
2
Standard type (75 C  
Outdoor FM antenna cord  
coaxial) connector  
(not supplied)  
Antenna cord  
NOTE  
We recommend that you use coaxial cable for the FM antenna as it is  
well-shielded against interference.  
3
Turn the loop antenna until you have the best reception during  
AM broadcast program reception.  
NOTE  
Make sure the antenna conductors do not touch any other terminals,  
connecting cords and power cords. This could cause poor reception.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connections  
This page is for  
2
Assembling the front and  
surround speakers  
The following procedure explains the front speaker assembly. The  
assembly of both the front and surround speakers are done in the  
same manner.  
Black  
Red  
Copper  
Silver  
Front speaker  
Surround speaker  
Stand (×4)  
(×2)  
(×2)  
Screw M5 x 25 mm (supplied)  
3
Base plate (×4)  
Speaker  
Black  
White  
NOTE  
The stands and the base plates are commonly used for both front and  
surround speakers assembly.  
Before assembling —  
Prepare a Phillips screwdriver (not supplied).  
Take care not to drop the base plate while assembling; otherwise,  
it may cause damage to the floor or injury.  
Stand  
Screw M5 x 25 mm  
(supplied)  
1
Completion  
Stand  
Speaker cord  
Base plate  
(supplied)  
Bottom  
with stand  
without stand  
You can route the speaker cords through one on the three  
grooves on the base plate depending on the speaker layout.  
Depending on the installing condition, you can assemble the  
front and surround speakers without the stands. In such a  
case, attach the speaker directly to the base plate instead of  
the stand.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connections  
This page is for  
Connecting the satellite (front, center, surround)  
speakers  
Before connecting the  
speaker cords;  
Twist and pull the insulation coat  
off and remove.  
Speaker cord (supplied)  
Connect the silver cords to the black (r) terminals.  
Connect the copper cords to the (q) terminals referring to the table below:  
Powered subwoofer  
SP-PWS8  
FRONT SPEAKERS (LEFT)  
FRONT SPEAKERS (RIGHT)  
CENTER SPEAKER  
White  
Red  
Green  
Blue  
SURROUND SPEAKERS (LEFT)  
SURROUND SPEAKERS (RIGHT)  
Gray  
Center speaker  
SP-THS9C  
Red  
Black  
Silver  
4 m  
Copper  
Front speakers  
SP-THS9F  
Surround speakers  
SP-THS9S  
4 m  
10 m  
CAUTION  
When you connect speakers other than the supplied ones, use  
speakers of the same speaker impedance (SPEAKER IMPEDANCE)  
indicated near the speaker terminals on the rear of the powered  
subwoofer.  
DO NOT connect more than one speaker to one speaker terminal.  
Continued on next page  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connections  
This page is for  
Before connecting the speaker cords;  
Twist and pull the insulation coat off and remove.  
Speaker cord (supplied)  
4 m  
Connect the silver cords to the black (r) terminals.  
Connect the copper cords to the (q) terminals  
referring to the table below:  
Front speakers  
SP-THS5F  
FRONT SPEAKERS (LEFT)  
FRONT SPEAKERS (RIGHT)  
CENTER SPEAKER  
White  
Red  
Green  
Blue  
SURROUND SPEAKERS (LEFT)  
SURROUND SPEAKERS (RIGHT) Gray  
Powered subwoofer  
SP-PWS5  
4 m  
10 m  
Center speaker  
SP-THS5C  
Surround speakers  
SP-THS7S  
(Bottom)  
Silver  
Black  
Copper  
Red  
Route the speaker cord  
through the hole on the  
bracket.  
When installing the satellite speakers on the wall;  
CAUTION  
Be sure to have them installed on the wall by a qualified personnel.  
DO NOT install the satellite speakers on the wall by yourself to  
avoid unexpected damage from their falling off the wall due to  
incorrect installation or weakness in wall structure.  
When you connect speakers other than the supplied ones, use  
speakers of the same speaker impedance (SPEAKER IMPEDANCE)  
indicated near the speaker terminals on the rear of the powered  
subwoofer.  
Care must be taken in selecting a location for speaker installation  
on a wall. Injury to personnel or damage to equipment may result  
if the speakers installed interfere with daily activities.  
DO NOT connect more than one speaker to one speaker terminal.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
7 To connect a TV equipped with the component video  
Speaker layout  
input jacks  
Center unit  
COMPONENT VIDEO OUT  
Center speaker  
TV  
Y
P
B
PR  
Front left  
speaker  
Front right  
speaker  
To component  
video input  
Powered  
subwoofer  
Component video cord (not supplied)  
NOTE  
If your TV supports progressive video input, you can enjoy a high  
quality picture by setting the progressive scan mode to active.  
(A pg. 18)  
If the component video input jacks of your TV are of the BNC type,  
use a plug adapter (not supplied) to convert the pin plugs to BNC  
plugs.  
Surround left  
speaker  
Surround right  
speaker  
The component video signals can be output only when you select  
DVDas the source to play. (A pg. 17)  
NOTE  
Although the satellite speakers and the powered subwoofer are  
magnetically shielded, the TV screen may appear mottled. In this  
case, keep enough distance between the speakers and the TV.  
The speakers are magnetically shielded to avoid color distortions on  
TVs. However, if not installed properly, they may cause color  
distortions. So, pay attention to the following when installing the  
speakers.  
7 To connect a TV equipped with the composite video  
or S-video jack  
Center unit  
Composite video cord  
(supplied)  
or  
When placing the speakers near a TV set, turn off the TVs main  
power switch or unplug it before installing the speakers. Then wait  
at least 30 minutes before turning on the TVs main power switch  
again.  
Some TVs may still be affected even though you have followed the  
above. If this happens, move the speakers away from the TV.  
Place the satellite speakers on a flat and level surface.  
Be sure to place the powered subwoofer to the TVs right. If you place  
the powered subwoofer to the TVs left, keep sufficient distance  
between them to prevent the TV screen from appearing mottled.  
S-video cord  
(not supplied)  
Align the 5 marks.  
To composite  
video input  
TV  
NOTE  
Select the appropriate scan mode according to your TV. See  
Changing the scan mode(A pg. 18).  
Connecting a TV  
You can get better picture quality in the order Component  
video > S-video > Composite video.  
Distortion of picture may occur when connecting to the TV via a  
VCR, or to a TV with a built-in VCR.  
You need to set MONITOR TYPEin the PICTURE menu  
correctly according to the aspect ratio of your TV. (A pg. 37)  
Connecting the powered  
subwoofer  
Powered  
subwoofer  
Center unit  
System cord  
(supplied)  
Align the 5 marks.  
Align the 5 marks.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Connections  
Connecting to an analog  
component  
Setting the VOLTAGE  
SELECTOR switch  
(except for Hong Kong  
and Australia)  
You can enjoy the sound of an analog component.  
Center unit  
LEFT  
To avoid damaging the powered subwoofer, set the VOLTAGE  
SELECTOR switch to the voltage of your area.  
RIGHT  
When you change the position of the VOLTAGE SELECTOR  
switch, use a tool such as a slotted screwdriver, etc.  
AUDIO IN  
(VCR)  
CAUTION  
DO NOT plug the power cord of the powered subwoofer  
before setting the VOLTAGE SELECTOR switch to the  
correct voltage.  
S-video cord  
(not supplied)  
RCA pin plug cord  
(not supplied)  
or  
Composite video  
cord  
(not supplied)  
A
B
C
VCR (A C or B C)  
TV (C)  
Cassette recorder (C)  
Powered subwoofer  
A To composite video output  
B To S-video output  
C To audio output  
Connecting the power  
cord  
NOTE  
The signals input to the VIDEO VCR IN jack will be output only from  
Make sure that all other connections have been completed.  
the VIDEO OUT jack, not from the S-VIDEO OUT jack.  
Center unit  
Powered  
subwoofer  
Connecting to a digital  
component  
AC IN  
You can enjoy the sound of a digital component.  
Center unit  
DBS* tuner  
MD recorder  
Power cord  
(supplied)  
Power cord  
OPTICAL  
Plug into AC outlets.  
To digital optical  
output  
Digital optical cord  
(not supplied)  
DIGITAL  
IN  
(DBS)  
CAUTION  
Disconnect the power cord before cleaning or moving the system.  
Do not pull on the power cord to unplug the cord. When unplugging  
the cord, always grasp and pull the plug so as not to damage the cord.  
If the AC outlets do not match the AC plugs, use the supplied AC plug  
adaptors. (except for Hong Kong and Australia)  
* DBS = Direct Broadcasting Satellite  
NOTE  
Only digital audio signals can be input when selecting DBSas the  
source to play. (A pg. 17) When connecting a video component such  
as a DBS tuner, operate this system to listen to the sound.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Operating external components with the remote control  
4 Press number buttons (1-9, 0) to enter  
The buttons described below are used on pages 14 and  
15.  
the manufacturers code (2 digits).  
Examples:  
For a Hitachi TV:  
Press 1, then 0.  
For a Toshiba TV:  
Press 0, then 8.  
Manufacturer  
JVC  
Code Manufacturer  
Code  
12  
01  
10  
02  
03  
Samsung  
Sharp  
Hitachi  
06  
Magnavox  
Mitsubishi  
Panasonic  
RCA  
Sony  
07  
Remote control  
mode selector  
Toshiba  
08  
04, 11 Zenith  
05  
09  
(play button)  
5 Release F TV.  
If there is more than one code listed for corresponding brand,  
try each one until you enter the correct one.  
7 Operation  
Aim the remote control at the TV.  
IMPORTANT  
Number  
buttons  
Before using the remote control to operate a TV;  
Set the remote control mode selector to TV.  
The following buttons are available:  
F TV:  
TV VOL +/–:  
TV/VIDEO:  
Turns TV on and off.  
Adjusts the volume.  
Selects the input mode (either TV or  
VIDEO).  
CHANNEL +/–:  
Changes the channels.  
1-10, 0, +10 (100+): Selects the channel.  
TV RETURN: Alternates between the previously selected  
channel and the current channel.  
NOTE  
Manufacturerscodes are subject to change without notice.  
Set the codes again after replacing the batteries of the remote control.  
Operating the DBS tuner  
or CATV converter  
Operating the TV  
7 To set the manufacturer’s code  
You can operate a JVC TV without setting the manufacturers code.  
7 To set the manufacturer’s code  
1 Slide the remote control mode selector  
1 Slide the remote control mode selector  
to TV.  
to VCR/DBS.  
2 Press and hold F TV.  
2 Press DBS.  
3 PKereepsthse bEutNtonTpEreRss.ed until step 4 is finished.  
3 Press and hold F VCR/DBS.  
4 PKereepsthse bEutNtonTpEreRss.ed until step 5 is finished.  
Continued on next page  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
See page 14 for button locations.  
Operating external components with the remote control  
5 Press number buttons (1-9, 0) to enter  
the manufacturers code (2 digits).  
5 Press number buttons (1-9, 0) to enter  
the manufacturers code (2 digits).  
Examples:  
For a GI Jerrold product:  
Examples:  
For a Philips VCR:  
Press 0, then 1.  
For a Sony product:  
Press 2, then 0.  
Press 0, then 9.  
For an NEC VCR:  
Press 2, then 5.  
Manufacturer  
Echostar  
GI Jerrold  
Hamlin  
Code  
Manufacturer Code  
Manufacturer Code  
21  
JVC  
01, 02, 03  
Philips  
RCA  
09  
01, 02, 03, 04, 05, 06, 07, 08  
Emerson  
Fisher  
11, 26  
29  
05, 06  
24  
15, 16, 17, 18  
13, 14  
19  
Samsung  
Pioneer  
Funai  
10, 14, 15, 16 Sanyo  
21, 22, 23  
27, 28  
30  
RCA  
Gold Star  
Hitachi  
Mitsubishi  
NEC  
12  
Sharp  
Scientific Atlanta  
Sony  
09, 10  
20  
04  
Shintom  
Sony  
13  
18, 19, 20  
08  
Zenith  
11, 12  
25  
Zenith  
Panasonic  
07, 17  
6 Release F VCR/DBS.  
If there is more than one code listed for your brand, try each  
one until you enter the correct one.  
6 Release F VCR/DBS.  
If there is more than one code listed for your brand, try each  
one until you enter the correct one.  
7 Operation  
Aim the remote control at the DBS tuner or CATV converter.  
7 Operation  
Aim the remote control at the VCR.  
IMPORTANT  
Before using the remote control to operate a  
DBS tuner or CATV converter;  
1 Set the remote control mode selector to  
VCR/DBS.  
IMPORTANT  
Before using the remote control to operate a  
VCR;  
1 Set the remote control mode selector to  
2 Press DBS.  
VCR/DBS.  
2 Press VCR.  
The following buttons are available:  
F VCR/DBS:  
Turns DBS tuner or CATV converter on and  
off.  
Changes the channels.  
The following buttons are available:  
F VCR/DBS: Turns VCR on and off.  
3 (play button): Starts playback.  
CHANNEL +/:  
1-10, 0, +10 (100+): Selects the channel.  
7 :  
8 :  
y
Stops operation.  
Pauses playback.  
Fast forwards video tape.  
Rewinds video tape.  
:
1:  
Operating the VCR  
REC:  
Press this button together with 3 (play button) to  
start recording or together with 8 to pause  
recording.  
7 To set the manufacturers code  
CHANNEL +/: Changes the TV channels on the VCR.  
1 Slide the remote control mode selector  
to VCR/DBS.  
NOTE  
When operating a VCR or DBS tuner/CATV converter;  
2 Press VCR.  
The source setting of VCR or DBS remains after you have changed  
the remote control mode selector to AUDIO or TV. When operating  
VCR or DBS tuner/CATV converter again, it is not necessary to press  
VCR or DBS after setting the remote control mode selector.  
3 Press and hold F VCR/DBS.  
4 PKereepsthse bEutNtonTpEreRss.ed until step 5 is finished.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic operations  
The buttons on the remote control are used to explain most of the  
operations in this manual. You can use the buttons on the center  
unit same as on the remote control for operations unless  
otherwise noted.  
On the remote control:  
Press F AUDIO.  
IMPORTANT  
Before using the remote control for the following  
operation;  
On the center unit:  
Press F.  
Set the remote control mode selector to AUDIO.  
When DVD is selected as the source (A pg. 17), the following  
messages will appear on the TV screen.  
The buttons described below are used on  
pages 16 to 19.  
F AUDIO  
MUTING  
DVD  
FM/AM  
VCR  
DBS  
Source  
selecting  
buttons  
• “OPEN/CLOSE:  
Appears when opening or closing the disc tray.  
• “NOW READING:  
AUDIO VOL  
Appears when the system is reading the disc information.  
• “REGION CODE ERROR!:  
Appears when the Region Code of the DVD VIDEO does not  
match the code the system supports. The disc cannot be  
played back.  
AUDIO  
Remote control  
mode selector  
• “NO DISC:  
Appears when no disc is loaded.  
• “CANNOT PLAY THIS DISC:  
Appears when unplayable disc is loaded.  
Cursor  
(3/2/Y/5)/  
ENTER  
ENTER  
NOTE  
The STANDBY lamp turns on when the power is turned off and turns  
off when the power is turned on.  
The power supply to the subwoofer is linked to the center unit. The  
POWER ON lamp on the subwoofer lights green when the power is  
turned on.  
SCAN MODE  
A small amount of the power is consumed even when the power is  
turned off (center unit only). This is called standby mode and the  
STANDBY lamp lights in this mode. Unplug the power cord from the  
AC outlet to turn the power off completely.  
TREBLE  
SMART  
SLEEP DIMMER S.SETUP  
S.WFR CENTER  
L-SURR.-R  
You can also turn on the system by pressing the following buttons;  
OPEN/CLOSE on the remote control or 0 on the center unit  
One of the source selecting buttons on the remote control  
3 on the center unit. You can use the same buttons on the remote  
control except after pressing FM/AM.  
STANDBY  
VOLUME  
PHONES  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
See page 16 for button locations.  
Basic operations  
Selecting the source to  
play  
Listening with headphones  
(not supplied)  
On the remote control:  
CAUTION  
Be sure to turn down the volume;  
(DVD, FM/AM, VCR or DBS).  
Before connecting or putting on headphones as high volume may  
damage both the headphones and your hearing.  
Before disconnecting headphones as high volume may be suddenly  
output from the speakers.  
DVD: To play back a disc (DVD VIDEO, VCD etc.). (A pg. 20)  
FM/AM: To tune in an FM or AM station. (A pg. 39)  
Each time you press the button, the band alternates  
between FM and AM.  
While connecting a pair of headphones to the PHONES jack on the  
center unit, the system automatically cancels the surround mode  
(A pg. 24) currently selected, deactivates the speakers, turn the  
subwoofers power off, and activates the headphone mode.  
HEADPHONEappears on the display window.  
VCR: To select the source from a component connected to the  
VCR IN jacks and AUDIO IN (VCR) jacks. (A pg. 13)  
DBS: To select the source from a component connected to the  
DIGITAL IN (DBS) jack. (A pg. 13)  
Headphone mode  
When using the headphones, the following signals are output  
regardless of your speaker setting;  
For 2 channel sources, the front left and right channel signals are  
output from the headphones.  
Multi-channel signals are down-mixed and output from the  
headphones.  
(DVD AUDIO) When the disc prohibits down-mixing, only the  
front left and right channels are output from the headphones. In  
this case, L/R ONLYappears on the display window for a few  
seconds.  
On the center unit:  
Press SOURCE repeatedly until the source  
name you want appears on the display  
window.  
NOTE  
When AM, FM or DBS is selected as the source, the system does not  
output video signals.  
It may take time to change the source.  
Adjusting the volume  
[VOLUME]  
Turning off the sound  
temporarily [MUTING]  
CAUTION  
Press MUTING.  
Always set the volume to minimum level before starting any source.  
If the volume is set at its high level, the sudden blast of sound could  
permanently damage your hearing and/or blow out the speakers.  
To restore the sound  
Perform one on the following:  
Press MUTING again.  
Press AUDIO VOL +/(or turn VOLUME on the center unit).  
On the remote control:  
Press AUDIO VOL + or .  
On the center unit:  
Adjusting the brightness  
of the indications  
[DIMMER]  
Turn VOLUME.  
Press DIMMER.  
Each time you press the button, the brightness level changes.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
See page 16 for button locations.  
Basic operations  
Sleep Timer [SLEEP]  
The system turns off automatically when the specified period of  
time has passed.  
Changing the scan mode  
The system can be accommodated to your TVs scan mode.  
NOTE  
Press SLEEP.  
Each time you press the button, the shut-off time changes.  
To use the system in PROGRESSIVE mode, it is required that the  
center unit is connected to the TV by using a component video cord  
(not supplied). (A pg. 12)  
Example:  
minutes  
7 While DVD is selected as the source and stopped  
1 Press and hold SCAN MODE for  
S L E E P 6 0m i n  
2 seconds.  
2 PCurreresntslyCseulecrtsedomro3de a/2ppeatros osnethleedcistpltahyewidndeosw.ired  
To check the remaining time  
Press SLEEP once.  
mode.  
PAL:  
Select this when your TV supports the  
PAL interlaced video input only.  
Select this when your TV equipped with  
component jacks supports the PAL  
progressive video input.  
To change the remaining time  
Press SLEEP repeatedly.  
PAL PROG.:  
To cancel  
Press SLEEP repeatedly until SLEEP OFFappears.  
Turning off the power also cancels the Sleep Timer.  
NTSC:  
Select this when your TV supports the  
NTSC interlaced video input only.  
NTSC PROG.: Select this when your TV equipped with  
component jacks supports the NTSC  
progressive video input.  
You can get better picture quality in PAL PROG.or NTSC  
PROG.mode than in PAL or NTSC mode.  
Adjusting the output level  
of the subwoofer and  
center/surround speakers  
[SUBWFR, CENTER,  
SURR L/R]  
Press S.WFR +/to adjust the subwoofer.  
Press CENTER +/to adjust the center  
speaker.  
3 Press ENTER while the selected mode  
is displayed.  
When PAL PROG.or NTSC PROG.is selected, the  
PROGRESSIVE indicator lights on the display window.  
NOTE  
Although the picture may be distorted when you press ENTER, this  
is not a malfunction of the system.  
Press SURR.-L +/to adjust the surround  
left speaker.  
Press SURR.-R +/to adjust the surround  
right speaker.  
There are some progressive TVs and High-Definition TVs that are  
not fully compatible with this system, resulting in an unnatural  
picture when playing back a DVD VIDEO in the progressive scan  
mode. In such a case, change the scan mode to PALor NTSC .  
To check the compatibility of your TV, contact your local JVC  
customer service center.  
NOTE  
All JVC progressive TVs and High-Definition TVs are fully  
compatible with this system.  
You can also make adjustments by using the setup menu shown on the  
TV screen. (A pg. 37)  
The adjustments take effect for all sources.  
You cannot make this adjustment when FM or AM is selected as the  
source.  
Adjusting the treble  
sound [TREBLE]  
Press TREBLE +/.  
NOTE  
The adjustments take effect for all sources.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
See page 16 for button locations.  
Basic operations  
When FAILED !appears on the TV screen  
The system could not detect the clapping sound correctly. In such a  
case, follow the instructions that appears on the TV screen.  
When the system detects the clapping sound as FAILED !three  
times, set the distance (DISTANCE) and the output level  
(LEVEL) manually (A pg. 37).  
Optimizing the speaker  
settings [Smart Surround  
Setup]  
NOTE  
To cancel  
When you change the positioning of the speakers or listener, or  
replace the supplied speakers with other ones, perform Smart  
Surround Setup again.  
Press SMART S.SETUP.  
NOTE  
You need to set the subwoofers output level (LEVEL) manually.  
(A pg. 18 and 37)  
7 While DVD is selected as the source and stopped  
In step 2, SW ERRORappears on the display window if the center  
unit and the powered subwoofer are not connected correctly by using  
the supplied system cord.  
1 Take your position where you listen to  
the sound.  
2 Press and hold SMART S.SETUP.  
3 PSrEeTsTIsNGEUNPTEflaRsh,espornetshesdiCspulayrswoinrdoYw. /5 to  
select the distance between the front  
speakers and the listening position,  
then press ENTER.  
4 Press Cursor Y/5 to select START,  
then press ENTER.  
5 Clap your hands over your head once.  
6 Make sure that COMPLETED !”  
appears on the TV screen, then press  
SMART S.SETUP.  
The system detects your clapping sound through the satellite  
speakers, then automatically makes the best settings for each  
speaker. COMPLETED !appears on the TV screen when  
Smart Surround Setup completes.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Playback  
The icon such as  
available for.  
shows the types of discs the operation is  
IMPORTANT  
Before using the remote control for the  
following operation;  
1 Set the remote control mode selector to  
AUDIO.  
2 Press DVD.  
1 Press OPEN/  
CLOSE.  
The system turns on and the  
disc tray comes out.  
2 Pl0acoen thae dceinstecr .unit can also be used.  
The buttons described below are used on pages 20 to 23.  
When placing an 8 cm  
disc  
Label side up  
OPEN/CLOSE  
DVD  
FL DISP.  
3 Press 3 (play button).  
AUDIO  
(play button)  
Remote control  
mode selector  
For MP3/WMA disc  
The file control display (A pg. 28) appears on the TV screen.  
For JPEG disc  
Each file (still pictures) is shown on the TV screen for about 3  
seconds (slide-show). When stopping playback, the file control  
display (A pg. 28) appears on the TV screen.  
ENTER  
For MPEG4 disc  
Pressing TOP MENU or MENU shows the file control display  
(A pg. 28) on the TV screen during playback.  
TITLE/GROUP  
7 To pause playback  
Press 8.  
To return to playback, press 3 (play button).  
Number buttons  
100+  
7 To stop  
Press 7.  
7 On-screen guide icons  
During DVD VIDEO playback, the following guide icons may  
appear for a while on the TV screen;  
: appears at the beginning of a scene containing multi-  
subtitle languages.  
: appears at the beginning of a scene containing multi-audio  
languages.  
: appears at the beginning of a scene containing multi-angle  
views.  
(Play),  
(Pause),  
/
(Fast forward/  
fast-reverse),  
/
(Slow-motion forward/  
reverse): appears when you perform each operation.  
: the disc cannot accept an operation you have tried to do.  
Continued on next page  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
See page 20 for button locations.  
Playback  
MP3/WMA disc  
Example:  
When an MP3 disc is played back  
NOTE  
(For JPEG) The system cannot accept operations even though you  
press any buttons before the entire picture appears on the TV screen.  
If you do not want the on-screen guide icons to appear, see page 38.  
Signal and speaker  
indicators  
Track number  
7 Playback information on the display window  
DVD VIDEO  
Example:  
T R 1 2 3 1 2 : 3 4  
When a DVD VIDEO encoded with Dolby Digital 5.1ch is played  
MP3 indicator*2  
Elapsed playing time (minute:second)  
(during playback only)  
Elapsed playing time  
(hour:minute:second)  
Chapter number  
Pressing FL DISP.  
C 1 0 : 0 2 : 3 1  
2
Group number  
*
Signal and speaker indicators (A pg. 25)  
Surround mode and digital signal format (A pg. 24)  
MP 3 G 1 2 T 1 2 3  
Track number  
Pressing FL DISP.  
*2 WMA indicator lights for WMA disc.  
Title number  
Chapter number  
JPEG disc  
Group number  
File number  
D V D T 1 C 1  
J P G G 1 2 F 1 2 3  
DVD AUDIO  
Signal and speaker indicators  
MPEG4 disc  
Track number  
T 1 1 : 2 3 : 4 5  
T R 1 2 3 1 0 : 3 1  
Track number  
Elapsed playing time  
(hour:minute:second)  
Elapsed playing time (minute:second)  
(during playback only)  
Pressing FL DISP.  
Group number  
Pressing FL DISP.  
Group number  
Track number  
Track number  
D V D A G 1 T 1  
A S F G 1 2 T 1 2 3  
VCD/SVCD/CD  
Signal and speaker indicators  
Example:  
When a CD is played back  
Track number  
Signal and speaker  
indicators  
NOTE  
You can change the time information mode (except for MP3/WMA/  
JPEG/MPEG4). (A pg. 26)  
You can also check the playback information on the TV screen.  
(A pg. 25)  
C D 1 1 0 : 3 1  
1
Elapsed playing time (minute:second)  
*
*1 VCD indication appears for VCD/SVCD.  
NOTE  
When a VCD or SVCD with PBC function is played, the elapsed  
playing time does not appear, but PBCappears.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
See page 20 for button locations.  
Playback  
7 Screen saver  
Skip to the beginning of a  
desired selection  
A TV screen may burn out if a static picture is displayed for a long  
time. To prevent this, the system automatically dims the screen if a  
static picture is displayed for over 5 minutes (the screen saver  
function).  
Pressing any button will cancel the screen saver function.  
If you do not want to use the screen saver function, see page 37.  
7 Using x/4 buttons  
7 For DVD VIDEO (chapter):  
During playback  
For VCD/SVCD (track):  
One Touch Replay  
You can move back the playback position by 10 seconds  
from the current position.  
During playback without PBC function  
For DVD AUDIO/CD/MP3/WMA/JPEG/MPEG4 (track/file):  
During playback or while stopped  
Press x or 4 repeatedly.  
7 During playback  
NOTE  
On the remote control:  
When playing back an MP3/WMA disc, you can make operations  
using the file control display. (A pg. 28)  
This feature may not work for some discs.  
Press  
.
NOTE  
7 Using number buttons on the remote control  
This function works in the same title.  
This feature may not work for some discs.  
7 For DVD VIDEO (title, chapter):  
While stopped, the title number is selected.  
During playback, the chapter number is selected.  
For DVD AUDIO (track):  
For VCD/SVCD (track):  
During playback without PBC function  
For CD/MP3/WMA/JPEG/MPEG4 (track/file):  
During playback or while stopped  
Fast-forward/fast-reverse  
search  
7 During playback  
On the remote  
control:  
Press number buttons (0-10, +10) to select  
the desired number.  
For details on using the number buttons, see How to use the  
number buttonsbelow.  
Press y or 1.  
Each time you press the button, the search speed changes (M2,  
M5, M10, M20, M60).  
How to use the number buttons  
To return to normal speed playback  
Press 3 (play button).  
To select 3:  
To select 14:  
To select 24:  
To select 40:  
Press 3.  
Press +10, then 4.  
Press and hold x or 4.  
Continuously pressing x or 4 increases the fast-forward/  
reverse search speed (M5 M20).  
Press +10 twice, then 4.  
Press +10 three times, then 10.  
Or press +10 four times, then 0.  
NOTE  
The operation with x or 4 above is available for a disc other  
than MPEG4 disc.  
When a DVD VIDEO, VCD, SVCD, or MPEG4 disc is played back,  
no sound comes out during fast-forward/reverse search.  
When a DVD AUDIO or CD is played back, sound is intermittent and  
low during fast-forward/reverse search.  
This feature may not work for some discs.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
See page 20 for button locations.  
Playback  
Locating a desired title/  
group using number  
buttons  
Playing back a bonus  
group  
Some DVD AUDIOs have a special group called bonus  
groupwhose contents are not open to the public. The  
bonus group is always assigned to the last group of a disc.  
To play back a bonus group, you have to enter the specific key  
number(a password). The way of getting the key number depends  
on the disc. After getting the key number, you can play back the  
bonus group by following the procedure below.  
7 During playback or while  
1stPoprpeedss TITLE/  
GROUP.  
_ _or _is shown in the title/group display area in the  
display window.  
7 While the BONUS indicator lights up on the display window  
Example:  
During DVD VIDEO playback  
1 Select the bonus group.  
For selecting the group, see Locating a desired title/group  
using number buttonsdescribed above.  
_ _  
T
1 : 2 3 : 4 5  
The key number entry indication appears.  
On the TV  
2 While the display window shows _ _”  
or _, use number buttons (0-10, +10)  
to enter the desired title or group  
number.  
On the display window  
_ _ _ _  
K E Y  
The system starts playback from the first chapter/track/file of  
the selected title/group.  
For details on using the number buttons, see How to use the  
number buttons(A pg. 22).  
2 Press number buttons (0-9) to enter the  
key number, then press ENTER.  
NOTE  
When you enter the correct key number, playback starts and  
the BONUS indicator goes off.  
This feature may not work for some discs.  
If you enter the wrong number, reenter the correct number.  
To clear the key number entry  
Perform whichever one of the following:  
Press 7.  
Open the disc tray.  
Turn off the system.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Advanced operations  
The icon such as  
shows the types of discs the operation is  
Using the surround mode  
7 Auto Surround (AUTO SURR)  
Used to reproduce the sound as it is recorded without any  
conversion (downmixing or simulation, etc.). For example, a  
multichannel source is automatically reproduced in multichannel  
audio.  
available for.  
IMPORTANT  
Before using the remote control for the following  
operation;  
1 Set the remote control mode selector to  
AUDIO.  
2 Press DVD.  
There are exceptions in the operation mentioned above. In such a  
case, follow each instruction.  
7 Dolby Surround  
Dolby Pro Logic II*1  
The buttons described below are used on pages 24 to 35.  
Dolby Pro Logic II has a newly developed multichannel playback  
format to decode all 2 channel sources stereo source and Dolby  
Surround encoded source into a 5.1 channel.  
Dolby Pro Logic II has two modes Movie mode and Music  
mode:  
AUDIO SUBTITLE SURR.  
AUDIO  
(play button)  
Remote control  
mode selector  
Pro Logic II Movie (PL II MOVIE)  
Suitable for reproduction of Dolby Surround encoded sources  
bearing the mark  
.
Pro Logic II Music (PL II MUSIC)  
Suitable for reproduction of any 2 channel stereo music sources.  
TOP MENU  
MENU  
Dolby Digital*1  
Used to reproduce multichannel soundtracks of the software  
encoded with Dolby Digital (  
).  
ENTER  
Cursor  
(3/2/Y/5)/  
ENTER  
ON  
2
SCREEN  
7 DTS Digital Surround*  
Used to reproduce multichannel soundtracks of the software  
encoded with DTS Digital Surround (  
).  
DTS Digital Surround (DTS) is another discrete multichannel  
digital audio format available on CD and DVD software.  
ANGLE  
ZOOM  
PAGE  
Number buttons  
100+  
REPEAT A-B RPT PLAY MODE CANCEL  
SETTING  
RETURN  
VFP  
Available Surround modes for each input signal  
The B marks show available surround modes.  
*1  
Surround  
off  
Auto  
DTSDigital Linear Packed  
Manufactured under  
license from Dolby  
Laboratories. Dolby,  
Pro Logic, MLP  
Lossless, and the  
double-D symbol are  
trademarks of Dolby  
Laboratories.  
DTSand DTS  
Digital Surroundare  
registered trademarks  
of Digital Theater  
Systems, Inc.  
Mode  
Dolby Surround  
DSP  
Surround  
Surround  
PCM  
PCM  
ALL  
CH  
AUTO  
SURR  
PL II  
PL II  
Dolby  
Signal  
SURR OFF  
DTS  
LPCM  
PPCM  
MOVIE*3 MUSIC*3 Digital  
ST.*3  
Dolby Digital  
(Multichannel)  
B
B
B
B
B
Dolby Digital  
(2 channel)  
B
B
B
*2  
*3  
DTS Digital  
Surround  
(Multichannel)  
B
B
B
B
B
DTS Digital  
Surround  
(2 channel)  
B
B
B
You can select these  
modes by pressing  
SURR.. (A pg. 25)  
Analog (VCR) or  
Linear/Packed  
PCM  
B
B
B
B
B
B
B
(2 channel)  
Linear/Packed  
PCM  
(Multichannel)  
B
B
Continued on next page  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
See page 24 for button locations.  
Advanced operations  
7 All Channel Stereo (DSP)  
7 When playing back digital multichannel software  
(except during SURR OFF mode)  
The appropriate multichannel surround mode (Dolby Digital, DTS  
Digital Surround or Linear/Packed PCM) is automatically selected.  
All Channel Stereo (ALL CH ST.) mode can reproduce a larger  
stereo sound field using all the connected (and activated) speakers.  
All Channel Stereo can be used while reproducing 2 channel stereo  
source.  
Normal stereo sound  
All Channel Stereo  
7 When playing back 2 channel source  
You can select either mode of Dolby Pro Logic II (PL II MOVIE/  
PL II MUSIC) or the DSP (ALL CH ST.) mode.  
Press SURR. repeatedly to select the  
desired mode.  
The surround mode is turned on and the current surround mode  
appears on the display window.  
Each time you press the button, the surround mode changes.  
7 Indicators on the display window  
Digital signal format indicators  
For details on each mode, see page 24.  
PPCM:  
Lights when DVD AUDIO packed PCM signals  
comes in.  
To turn off the surround mode  
Press SURR. repeatedly until SURR OFF  
appears on the display window.  
LPCM:  
GD:  
C:  
Lights when Linear PCM signal comes in.  
Lights when Dolby Digital signals come in.  
Lights when DTS Digital (Surround) signals  
come in.  
No digital signal indicator lights when analog  
signals come in.  
Storing adjustments auto memory  
No indication:  
When you turn the power off, the system memorizes the current  
surround mode. The memorized mode is automatically recalled  
when you turn the power on.  
Dolby Surround/DSP mode indicators  
GPLII: Lights when Dolby Pro Logic II mode is activated.  
NOTE  
DSP:  
Lights when All Channel Stereo mode is activated.  
When FM or AM is selected as the source, you cannot select any  
surround mode.  
Source signal indicators, etc.  
Note that the surround mode takes no effect on MPEG4 playback.  
For a down-mixing prohibited DVD AUDIO disc, the system  
continues to output multi-channel signals with MULTI CHshown  
on the display window even if the surround mode is turned off during  
playback. On the other hand, the system outputs only the front left and  
front right channel signals with LR ONLYshown on the display  
window when you start playback with the surround mode having been  
set to SURR OFF.  
Light to indicate the incoming signals.  
a: Lights when the left channel signal comes  
in.  
b: Lights when the center channel signal comes in.  
c: Lights when the right channel signal comes in.  
d: Lights when the LFE channel signal comes in.  
g: Lights when the surround left channel signal comes in.  
i: Lights when the surround right channel signal comes in.  
h: Lights when the monaural surround channel signal or 2  
channel Dolby Surround signal comes in.  
SW : Always lights.  
Using the on-screen bar  
You can check disc information and you can use some functions  
using the on-screen bar.  
The channel with “ ” shows that the corresponding speakers are  
reproducing the channelssound.  
If the channelssound decoded into 5.1 channel is reproduced, only  
lights.  
Showing the on-screen bar  
7 Whenever a disc is  
Selecting the surround mode  
loaded  
The system is set up to automatically select the optimal surround  
mode for input signal from digital multichannel software.  
When playing back 2 channel source, you can select the desired  
surround mode manually.  
Press ON SCREEN.  
Each time you press the button, the on-screen bar changes as  
follows on the TV screen.  
IMPORTANT  
Before using the remote control for the following  
operation;  
Example:  
During DVD VIDEO playback  
Set the remote control mode selector to AUDIO.  
OFF  
(The on-screen bar disappears)  
(back to the beginning)  
The currently selected item shows green.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
See page 24 for button locations.  
Advanced operations  
F Shows playback status.  
appears during playback.  
: appears during fast forward/reverse.  
7 Contents of the on-screen bar during playback  
DVD VIDEO  
:
/
/
: appears during playback in forward slow-motion/  
reverse slow-motion.  
:
:
appears when stopped.  
G Select this to change time information (E). See Changing the  
time informationbelow.  
DVD AUDIO  
H Select this for Repeat Playback. (A pg. 33)  
I Select this for time search function. (A pg. 28)  
J Select this for chapter (for DVD VIDEO) or track (for DVD  
AUDIO) search function. (A pg. 27)  
K Select this to change audio language, channel, or stream.  
(A pg. 30)  
L Select this to change subtitle language. (A pg. 29)  
M Select this to change view angle. (A pg. 29)  
N Select this to change the page. (A pg. 31)  
O Shows Playback Mode status.  
PROGRAM: appears during Program Playback. (A pg. 32)  
RANDOM: appears during Random Playback. (A pg. 33)  
P Shows Repeat Mode status. (A pg. 33)  
VCD  
SVCD  
CD  
Changing the time information  
You can change the time  
information in the on-screen  
bar on the TV screen and the  
display window of the center unit.  
7 During playback  
1 Press ON SCREEN twice.  
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht  
.
MPEG4*  
3 Press ENTER repeatedly to select the  
desired information.  
* 7 N are not available.  
Example:  
When elapsed playing time of disc is selected.  
A Shows disc type.  
B Shows current transfer rate (Megabits per second).  
C Shows current title (for DVD VIDEO) or group (for DVD  
AUDIO) number.  
D Shows current chapter number (for DVD VIDEO) or track  
number (for other type of discs).  
TIME: Elapsed playing time of current chapter/track  
REM:  
Remaining time of current chapter/track  
TOTAL: Elapsed time of disc  
T. REM: Remaining time of disc  
E Shows time information. See Changing the time information”  
below.  
4 Press ON SCREEN.  
The on-screen bar disappears.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
See page 24 for button locations.  
Advanced operations  
2 Press number buttons (1-10, +10) to  
For details on using the number buttons, see How to use the  
number buttons(A pg. 22).  
Playing from a specified  
position on a disc  
select the number of the desired item.  
You can start playing a title, chapter or track you specify. You can  
also play a disc from specified time.  
To return to the menu  
Press RETURN.  
When NEXTor PREVIOUSis shown on the TV  
Locating a desired scene from the DVD  
menu  
DVD VIDEOs generally have their own menus which show  
disc contents and you can display them on the TV screen.  
You can locate a desired scene by using these menus.  
screen:  
To go to the next page, press x.  
To return to the previous page, press 4.  
NOTE  
If you want to play a PBC-compatible VCD/SVCD without using the  
PBC function, perform any of the following:  
7 Whenever a DVD VIDEO is loaded  
Start playback by pressing number buttons while stopped.  
Press x repeatedly until the desired track number is displayed,  
then start playback by pressing 3 (play button).  
The track number appears on the display window instead of  
PBC.  
1 Press TOP MENU or MENU.  
The menu appears on the TV screen.  
Example:  
To activate the PBC function when playing a PBC-compatible VCD/  
SVCD without using the PBC function, perform any of the following:  
Press TOP MENU or MENU.  
Press 7 twice to stop playback, then press 3 (play button).  
Locating a desired chapter/track using the  
on-screen bar  
Normally, a DVD VIDEO which contains more than one title  
will have a topmenu which lists the titles. Press  
TOP MENU to show the title menu.  
Some DVD VIDEO may also have a different menu which is  
shown by pressing MENU.  
7 During playback  
See the instructions for each DVD VIDEO regarding its  
1 Press ON SCREEN twice.  
2 pUarstieculCarumresnuo.r 3/2/Y/5 to select a  
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht  
/
desired item.  
.
3 Press ENTER.  
3 Press ENTER.  
With some discs, you can also select items by entering the  
corresponding number using number buttons.  
Example:  
During DVD VIDEO playback  
Locating a desired scene using a VCD/  
SVCD menu with PBC  
A VCD or SVCD recorded with PBC has its own  
menus such as a list of contained songs. You can  
locate a specific scene by using these menus.  
4 Press number buttons (0-9) to enter the  
desired chapter number.  
Example:  
7 During playback with PBC function  
To select 8:  
To select 10:  
To select 20:  
To select 37:  
Press 8.  
1 Press RETURN repeatedly until the  
Press 1, then 0.  
Press 2, then 0.  
Press 3, then 7.  
menu appears on the TV screen.  
Example:  
To correct a misentry  
5 RPerpeeastssteEp 4N. TER.  
6 Press ON SCREEN.  
The on-screen bar disappears.  
NOTE  
You can select up to the 99th chapter/track.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
See page 24 for button locations.  
Advanced operations  
Locating a desired position by specifying  
the time  
Using the file control  
display  
7 For DVD VIDEO/DVD  
AUDIO:  
You can search and play desired groups and  
tracks/files using the file control display on  
the TV screen.  
During playback  
For VCD/SVCD:  
While stopped or during playback without PBC function  
Current group/total group Playback mode (PROGRAM,  
For CD:  
number  
RANDOM, REPEAT)  
During playback or while stopped  
Elapsed playing time of current  
track (for MP3/WMA/MPEG4  
only)  
Tag information (for MP3/  
WMA only)  
7 When specifying the elapsed playing time from the  
beginning of the disc  
Perform the following procedure while stopped.  
7 When specifying the elapsed playing time from the  
beginning of the current title/track  
Perform the following procedure during playback.  
1 Press ON SCREEN twice.  
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht  
3 Press ENTER.  
.
Current group  
Current track (file)  
4 Use number buttons (0-9) to enter the  
Current track (file) / total track  
(file) number on current group  
Total track (file)  
number on disc  
time.  
Example:  
Playback status  
To play back from a point 2 (hours): 34 (minutes): 08 (seconds)  
elapsed  
The file control display appears automatically during playback  
(MP3/WMA) or while stopped.  
Press 2  
Press 4  
Press 3  
Press 0  
Press 8  
To cancel a misentry  
5 PPrersessCsursEorN2TrEepRea.tedly.  
6 Press ON SCREEN.  
The on-screen bar disappears.  
NOTE  
You can specify time in hours/minutes/seconds for DVD VIDEO/  
DVD AUDIO and in minutes/seconds for VCD/SVCD/CD.  
Continued on next page  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
See page 24 for button locations.  
Advanced operations  
7 For MP3/WMA:  
2 Press ANGLE repeatedly or press  
Cursor Y/5 to select the desired view  
angle.  
During playback or while stopped  
For JPEG/MPEG4:  
1WPhirleesstosppCedursor 3/2/Y/5 to select the  
When using the on-screen bar:  
desired group/track/file.  
1 Press ON SCREEN twice.  
2 PrFeorsMsP33/WM(pAl,apylaybbauctktsotanrts)forormEthNe sTelEecRted. track.  
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht  
3 Press ENTER.  
.
Track playback/slide-show starts from the selected track/  
file.  
When you press ENTER for JPEG, only the selected file is  
played back.  
NOTE  
During playback, you can locate the desired track/file by pressing  
x/4 or Cursor 5/Y.  
You can also check playback information on the display window.  
(A pg. 21)  
Some group, track and file names may not be displayed correctly  
depending on recording conditions.  
The order of groups, tracks and files may be displayed differently  
from the order displayed on your personal computer.  
4 Press Cursor Y/5 to select the desired  
view angle.  
5 Press ENTER.  
6 Press ON SCREEN.  
The on-screen bar disappears.  
NOTE  
When Resume Playback is set to  
During DVD AUDIO playback, this feature is available only for the  
video part.  
ON(A pg. 38) and you stop  
playback by the following  
operations, the position where playback has been stopped is stored.  
(RESUMEappears on the display window.)  
Turning off the power (A pg. 16)  
Pressing 7 once  
Selecting the subtitle  
7 During playback of a disc containing  
subtitles in several languages  
Changing the source (A pg. 17)  
When using the SUBTITLE button:  
To start playback from the stored position  
Press 3 (play button) or DVD.  
There may be a case where 3 (play button) does not work after  
1 Press SUBTITLE.  
Example (DVD VIDEO):  
changing the source.  
ENGLISHis selected out of 3 subtitle languages recorded.  
To clear the stored position  
Press 7 again or open the disc tray.  
Selecting a view angle  
2 Press Cursor Y/5 to select the desired  
subtitle.  
7 During playback of a disc containing multi-view  
angles  
For SVCD  
When using the ANGLE button:  
An SVCD can contain up to four subtitles. Pressing  
SUBTITLE changes the subtitles regardless of whether the  
subtitles are recorded or not. (Subtitles will not change if no  
subtitle is recorded.)  
1 Press ANGLE.  
Example:  
The first view angle is selected out of 3 view angles recorded.  
NOTE  
To clear the subtitle, press SUBTITLE. Each time you press  
SUBTITLE, subtitle appears and disappears alternately.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
See page 24 for button locations.  
Advanced operations  
When using the on-screen bar:  
4 Press Cursor Y/5 to select the desired  
audio.  
1 Press ON SCREEN twice.  
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht  
3 Press ENTER.  
.
5 Press ENTER.  
6 Press ON SCREEN.  
The on-screen bar disappears.  
NOTE  
Some subtitle or audio languages are abbreviated in the pop-up  
window. See The language codes list(A pg. 36).  
• “ST, Lor Ris displayed when playing a VCD or SVCD  
respectively representing stereo, left soundand right sound.  
4 Press Cursor Y/5 repeatedly to select  
the desired subtitle.  
Special picture playback  
5 Press ENTER.  
6 Press ON SCREEN.  
Frame-by-frame playback  
7 During playback  
The on-screen bar disappears.  
NOTE  
Press 8 repeatedly.  
Each time you press the button, the  
still picture advances by one frame.  
To clear the subtitle, press SUBTITLE. Each time you press  
SUBTITLE, subtitle appears and disappears alternately.  
Some subtitle or audio languages are abbreviated in the pop-up  
window. See The language codes list(A pg. 36).  
During DVD AUDIO playback, this feature is available only for the  
video part.  
To return to normal playback  
Press 3 (play button).  
NOTE  
During DVD AUDIO playback, this feature is available only for the  
video part.  
Selecting the audio  
7 During playback of a disc  
containing audio in several  
languages  
Playing back in slow-motion  
7 During playback  
When using the AUDIO button:  
1 Press 8 at the point  
where you want to start playback in  
slow-motion from.  
1 Press AUDIO.  
Example (DVD VIDEO):  
2 PThreessysstemypaus.es playback.  
ENGLISHis selected out of 3 audio languages recorded.  
Playback in forward slow-motion starts.  
For DVD VIDEO/DVD AUDIO only:  
To play back in reverse slow-motion, press 1.  
2 Press AUDIO repeatedly or press  
Cursor Y/5 to select the desired audio.  
Each time you press the button, the playback speed become  
faster.  
Example: On the TV  
When using the on-screen bar:  
1 Press ON SCREEN twice.  
To return to normal playback  
Press 3 (play button).  
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht  
3 Press ENTER.  
.
NOTE  
Sound cannot be heard during slow-motion playback.  
During DVD AUDIO playback, this feature is available only for the  
video part.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
See page 24 for button locations.  
Advanced operations  
Selecting browsable still picture recorded  
on DVD AUDIO  
NOTE  
The number of the magnification steps varies depending on the disc  
type.  
Most DVD AUDIOs include browsable still pictures  
(B.S.P.), which usually appear by turns automatically  
during playback according to the playback sequence. You  
can change the picture (turn the page) manually when the current  
group/track has selectable pictures (pages).  
During slide-show playback of a JPEG disc, zooming in is not  
available. In such a case, press 8 to pause slide-show playback, then  
zoom in.  
During DVD AUDIO playback, this feature is available only for the  
video part.  
During MPEG4 playback, there may be a case where Cursor (3/2/  
Y/5) does not work in step 2 above.  
7 During playback and while the B.S.P. indicator lights up on the  
display window  
When using the PAGE button:  
Changing the VFP setting  
Press PAGE repeatedly to select a desired  
still picture.  
The VFP (Video Fine  
Processor) function  
enables you to adjust  
the picture character according to the type of programming, picture  
tone or personal preference.  
When using the on-screen bar:  
1 Press ON SCREEN twice.  
7 During playback  
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht  
3 Press ENTER.  
.
1 Press VFP.  
The current VFP settings appear on the TV screen.  
Example:  
4 Press Cursor 5/Y to select the desired  
still picture.  
5 Press ENTER.  
2 Press Cursor 3/2 repeatedly to select  
the VFP mode.  
6 Press ON SCREEN.  
NORMAL:Normally select this.  
CINEMA: Suitable for movies.  
When you select NORMALor CINEMA, press VFP to  
complete the setting.  
The on-screen bar disappears.  
Zooming in  
USER 1 and USER 2:  
7 Duringplaybackor  
You can adjust parameters that affect picture  
appearance.  
while paused  
Only when selecting USER 1or USER 2in step  
1 Press ZOOM.  
2, proceed to perform the following operation;  
2 WEachhitlimeezyoouopmresesdZOinO,Mp, srceensesmCagunirfiscaotiorn3cha/n2ges/Y. /  
5 to move zoom-in area.  
3 Press Cursor Y/5 repeatedly to select  
a parameter you want to adjust.  
Adjust gradually and confirm picture appearance results are as  
preferred.  
To return to normal playback  
Press ZOOM repeatedly to select ZOOM OFF.  
GAMMA:  
Controls brightness of neutral tints while maintaining  
brightness of dark and bright portions.  
BRIGHTNESS:  
Controls screen brightness.  
CONTRAST:  
Controls screen contrast.  
SATURATION:  
Controls screen color depth.  
TINT:  
Controls screen tint.  
SHARPNESS:  
Controls screen sharpness.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
See page 24 for button locations.  
Advanced operations  
4 Press ENTER.  
2 Follow the instructions that appears on  
the TV screen to program the desired  
chapters/tracks.  
Example:  
For details on using the number buttons, see How to use the  
The contents numbers that you have to specify for  
programming varies depending on the disc type:  
5 Press Cursor Y/5 to change the  
setting.  
DVD VIDEO:  
VCD, SVCD, CD:  
DVD AUDIO, MP3, WMA:  
Groups and tracks  
Titles and chapters  
Tracks  
6 Press ENTER.  
7 TRhee pcuerraentt sVtFePpsesttin3gstoapp6eatroagaaind.just other  
Before you program the tracks in bonus group on a DVD  
AUDIO, perform the procedure of Playing back a bonus  
group(A pg. 23) to turn off the BONUS indicator on the  
display window.  
You can specify the chapters/tracks whose number is up to  
99.  
(For CD, SVCD or VCD) When the total playback time  
exceeds 99 minutes 59 seconds, “–:–” will appear on the  
display window. But, it is possible to continue  
programming.  
parameters.  
8 Press VFP.  
NOTE  
Although the setting display disappears in the middle of the  
procedure, the setting at that time will be stored.  
(For DVD VIDEO, DVD AUDIO, MP3 or WMA) When  
you press ENTER instead of the number buttons in the  
Track/Chaper column, ALLappears and all the tracks or  
chapters on the selected group or title are programmed as a  
step.  
Program Playback  
7 While stopped  
To clear the programs one by one from the last  
entered number  
Press CANCEL repeatedly.  
To clear all programs  
Press 7.  
1 Press PLAY MODE repeatedly until  
program window appears on the TV  
screen.  
You can also clear the program by turning off the system.  
3 Press 3 (play button).  
If all of the programmed tracks/files have been played back,  
playback stops and the program window appears again. Note  
that program setting remains.  
To check the program contents  
During playback, press 7. Playback stops and the program window  
appears.  
To quit the Program mode  
While stopped, press PLAY MODE repeatedly until both program  
window and  
disappear from the TV screen.  
NOTE  
The Resume function cannot be used with Program Playback.  
Program Playback may not work for some discs.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
See page 24 for button locations.  
Advanced operations  
Display  
window  
TV screen  
Meanings  
Random Playback  
You can play titles or  
tracks on a disc in  
random order.  
Repeats the current group for  
DVD AUDIO/MP3/WMA/  
JPEG/MPEG4 disc.  
REPEAT GROUP  
Repeats the current title for  
DVD VIDEO.  
7 While stopped  
1 Press PLAY MODE repeatedly until  
Repeats all tracks/files for VCD/  
SVCD/CD/MP3/WMA/JPEG/  
MEPG4 disc.  
ALL  
1
appears on the TV screen.  
REPEAT ALL  
,
2 Press 3 (play button).  
Repeats the current track for  
DVD AUDIO/VCD/SVCD/CD/  
MP3/WMA/MPEG4 disc.  
To quit Random mode  
REPEAT TRACK,  
REPEAT STEP  
While stopped, press PLAY MODE repeatedly until both program  
window and  
disappear from the TV screen.  
,
Repeats the current chapter for  
DVD VIDEO.  
You can also clear the Random mode by turning off the system.  
REPEAT STEP  
NOTE  
Repeat mode is off.  
The system plays back the disc  
normally.  
No  
indication  
The same title/track will not be played back more than once during  
Random Playback.  
NOTE  
For DVD VIDEO and DVD AUDIO, REPEAT ALL may not be  
available depending on the disc.  
Repeat Playback  
When using the on-screen bar (except for MP3/  
WMA/JPEG/MPEG4 disc):  
Repeating the current selection  
7 For DVD VIDEO:  
During playback  
For VCD/SVCD:  
During playback without PBC  
function or stopped  
For DVD AUDIO/CD/MP3/  
JPEG/MPEG4:  
1 Press ON SCREEN twice.  
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht  
3 Press ENTER.  
.
During playback or stopped  
When using the REPEAT button:  
Press REPEAT.  
4 Press Cursor Y/5 repeatedly to select  
C 1 1 : 3 1 : 0 1  
the Repeat mode.  
5 Press ENTER.  
Repeat mode indicator  
Each time you press REPEAT, the Repeat mode changes.  
6 Press ON SCREEN.  
The on-screen bar disappears.  
To cancel Repeat Playback  
Select OFFin step 4.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
See page 24 for button locations.  
Advanced operations  
To cancel  
Select OFFin step 4, then press ENTER.  
Repeating a desired part [A-B Repeat]  
You can repeat playback of a  
desired part by specifying the  
beginning (point A) and  
ending (point B).  
NOTE  
When playing back a DVD VIDEO, A-B Repeat Playback is possible  
only within the same title.  
• “A-Bcannot be selected during Program and Random Playback.  
7 During playback  
When using the A-B RPT button:  
Tray lock  
You can lock the tray and prohibit the unwanted disc ejection.  
1 Press A-B RPT at the beginning of the  
part you want to repeat (point A).  
The repeat mode indicator “  
appears on the display  
On the center unit ONLY:  
While the system is turned off  
window.  
2 Press A-B RPT again at the end of the  
part you want to repeat (point B).  
The repeat mode indicator on the display window changes to  
and A-B Repeat Playback starts. The selected part  
Press and hold  
of the disc (between point A and B) is played repeatedly.  
The system turns on and LOCKEDappears on the display  
window.  
If you try to eject the disc, LOCKEDappears to indicate that  
the tray is locked.  
To cancel  
Press A-B RPT during A-B Repeat Playback.  
To cancel  
Carry out the same operation again.  
The system turns on and UNLOCKEDappears on the display  
window.  
When using the on-screen bar:  
1 Press ON SCREEN twice.  
2 PThreeosn-sscrCeeunrbsaroarpp3ears/2on thteoThVisgcrheelnig. ht  
3 Press ENTER.  
.
4 Press Cursor Y/5 repeatedly to select  
A-B.  
5 Press ENTER at the beginning of the  
part you want to repeat (point A).  
6 Press ENTER at the end of the part you  
want to repeat (point B).  
7 AP-rBeRsespeOat PNlaySbCackRsEtarEtsN. .  
The on-screen bar disappears.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
See page 24 for button locations.  
Advanced operations  
M. OUT (Monitor Out):  
Select the video output jack type by which you watch DVD  
playback after connecting your TV. (A pg. 12)  
Set the video output to use AV COMPU LINK remote  
control system. (A pg. 41)  
Sound and other settings  
IMPORTANT  
Before using the remote control for the following  
VIDEO:  
S:  
To watch DVD playback via the VIDEO jack.  
To watch DVD playback via the S-VIDEO jack.  
operation;  
Set the remote control mode selector to  
COMPNT (component):  
To watch DVD playback via the  
AUDIO.  
NOTE  
Before you start operation;  
COMPONENT VIDEO OUT jacks.  
3 Press Cursor 3/2 to make an  
adjustment or selection.  
Example:  
There is a time limit when doing the following steps. If the setting is  
cancelled before you finish, start from step 1 again.  
1 Press SETTING.  
Example:  
--  
B A L : R  
5
B A L : C E N T E R  
The adjustment is set and the display automatically disappears  
a few seconds later.  
2 Press Cursor Y/5 to select the item  
NOTE  
you want to set.  
When DOLBY Dor DTSis selected, if a signal encoded with  
another digital format comes in, you cannot listen to the sound. (The  
GD or C indicator flashes.)  
BAL (Balance):  
You can adjust the balance between the front left and front  
right speakers.  
DEC (Decode):  
When you play an external source (DBS is selected as a  
source) that was encoded with Dolby Digital or DTS Digital  
Surround, the following symptoms may occur;  
No sound comes out at the beginning of playback.  
Noise comes out while searching for or skipping chapters  
or tracks.  
AUT/PCM (Auto/PCM):  
Normally select this. The system automatically  
detects the incoming signals.  
DOLBY D: Select this if the symptoms above occur when  
playing a disc (or software) encoded with  
Dolby Digital.  
DTS:  
Select this if the symptoms above occur when  
playing a disc (or software) encoded with DTS  
Digital Surround.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setting DVD preferences  
NOTE  
Using the setup menus  
See the following The language codes listfor the code of each  
language, such as AA, etc.  
You can change the language used in the setup menus. See  
Menu descriptionbelow.  
The language codes list  
Basic operation on the setup menus  
AA Afar  
IK Inupiak  
IN Indonesian  
IS Icelandic  
IW Hebrew  
RN Kirundi  
RO Rumanian  
RU Russian  
RW Kinyarwanda  
SA Sanskrit  
SD Sindhi  
IMPORTANT  
Before using the remote control for the  
following operation;  
AB Abkhazian  
AF Afrikaans  
AM Ameharic  
AR Arabic  
1 Set the remote control mode selector to  
JI  
Yiddish  
AUDIO.  
2 Press DVD.  
AS Assamese  
AY Aymara  
AZ Azerbaijani  
BA Bashkir  
BE Byelorussian  
BG Bulgarian  
BH Bihari  
JW Javanese  
TOP MENU  
PTYMENU  
KA Georgian  
KK Kazakh  
SG Sangho  
SEARCH  
SH Serbo-Croatian  
SI Singhalese  
SK Slovak  
KL Greenlandic  
KM Cambodian  
KN Kannada  
KO Korean (KOR)  
KS Kashmiri  
ENTER  
Cursor  
(3/2/Y/5)/  
ENTER  
ON  
SCREEN  
REC  
SL Slovenian  
SM Samoan  
SN Shona  
RDS  
DISPLAY  
BI Bislama  
BN Bengali, Bangla KU Kurdish  
SO Somali  
SETUP  
BO Tibetan  
BR Breton  
CA Catalan  
CO Corsican  
CS Czech  
KY Kirghiz  
LA Latin  
SQ Albanian  
SR Serbian  
SS Siswati  
7 While stopped  
LN Lingala  
LO Laothian  
LT Lithuanian  
ST Sesotho  
SU Sundanese  
1 Press SET UP.  
CY Welsh  
LV Latvian, Lettish SV Swedish  
DA Danish  
DZ Bhutani  
EL Greek  
MG Malagasy  
MI Maori  
SW Swahili  
TA Tamil  
MK Macedonian  
ML Malayalam  
MN Mongolian  
MO Moldavian  
MR Marathi  
TE Telugu  
TG Tajik  
EO Esperanto  
ET Estonian  
EU Basque  
FA Persian  
FI Finnish  
FJ Fiji  
TH Thai  
TI Tigrinya  
TK Turkmen  
TL Tagalog  
TN Setswana  
TO Tonga  
TR Turkish  
TS Tsonga  
TT Tatar  
MS Malay (MAY)  
MT Maltese  
2 Follow the instructions that appears on  
the TV screen.  
FO Faroese  
FY Frisian  
GA Irish  
MY Burmese  
NA Nauru  
NE Nepali  
Menu description  
GD Scots Gaelic  
GL Galician  
GN Guarani  
GU Gujarati  
HA Hausa  
NL Dutch  
NO Norwegian  
OC Occitan  
TW Twi  
UK Ukrainian  
UR Urdu  
:Language menu (LANGUAGE)  
OM (Afan) Oromo  
OR Oriya  
UZ Uzbek  
VI Vietnamese  
VO Volapuk  
WO Wolof  
XH Xhosa  
YO Yoruba  
7 MENU LANGUAGE  
Some DVDs have their own menus in multiple languages.  
Select the initial language*.  
HI Hindi  
PA Panjabi  
HR Croatian  
HU Hungarian  
HY Armenian  
IA Interlingua  
IE Interlingue  
PL Polish  
PS Pashto, Pushto  
PT Portuguese  
QU Quechua  
7 AUDIO LANGUAGE  
Some DVDs have multiple audio languages.  
Select the initial audio language*.  
RM Rhaeto-Romance ZU Zulu  
7 SUBTITLE  
Some DVDs have multiple subtitle languages.  
Select the initial subtitle language*.  
7 ON SCREEN LANGUAGE  
Select the language shown on the TV screen when operating this  
system.  
* When the language you have selected is not recorded to a disc,  
the original language is automatically used as the initial  
language.  
Continued on next page  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Setting DVD preferences  
AUTO  
:Picture menu (PICTURE)  
7 MONITOR TYPE  
Select this when you want to enjoy surround sound with its  
full dynamic range (no effect applied).  
ON  
You can select the monitor type to match your TV when you play  
DVDs recorded in the pictures height/width ratio of 16:9.  
16:9/16:9 MULTI (Wide television conversion)  
Select this when the aspect ratio of your TV is 16:9 (wide  
TV).  
Select this when you want to fully apply the compression  
effect (useful at midnight).  
NOTE  
When you play a multichannel Dolby Digital source with the  
surround mode is off, the setting of D. RANGE COMPRESSION is  
set to ON automatically.  
4:3 LB/4:3 MULTI LB (Letter Box conversion)  
Select this when the aspect ratio of your TV is 4:3  
(conventional TV). While viewing a wide screen picture, the  
black bars appear on the top and the bottom of the screen.  
4:3 PS/4:3 MULTI PS (Pan Scan conversion)  
Select this when the aspect ratio of your TV is 4:3  
(conventional TV). While viewing a wide screen picture, the  
black bars do not appear, however, the left and right edges of  
the pictures will not be shown on the screen.  
:Speaker setting menu  
(SPK. SETTING)  
7 Level menu (LEVEL)  
CENTER SPEAKER/SURROUND RIGHT SPEAKER/  
SURROUND LEFT SPEAKER/SUBWOOFER  
While monitoring the test tone, adjust the center and surround  
speakers volume as much as that of the front speakers.  
Ex.: 16:9  
Ex.: 4:3 LB  
Ex.: 4:3 PS  
TEST TONE*  
Outputs the test tone.  
RETURN  
NOTE  
Even if 4:3 PSor 4:3 MULTI PSis selected, the screen size may  
become 4:3 LBor 4:3 MULTI LBwith some DVDs. This  
depends on how DVDs are recorded.  
When selecting MULTIoptions as the monitor type for the multi-  
color system TV, this system outputs PAL or NTSC video signal  
according to the disc, regardless of the scan mode setting. (A pg. 18)  
Returns to the SPK. SETTING menu.  
* The test tone comes out of all of the activated speakers in the  
following sequence:  
s Front left speaker s Center speaker s Front right  
speaker s Surround right speaker s Surround left  
speaker s (back to the beginning)  
7 PICTURE SOURCE  
When you set the scan mode to PROGRESSIVE (A pg. 18), you  
can obtain optimal picture quality by selecting whether the content  
on the disc is processed by field (video source) or by frame (film  
source).  
NOTE  
Before you turn on the test tone, be sure to select AUTO SURR as the  
surround mode. (A pg. 24)  
Normally set to AUTO.  
AUTO  
7 Distance menu (DISTANCE)  
Used to play a disc containing both video and film source  
materials.  
This system recognizes the source type (video or film) of the  
current disc according to the disc information.  
If the playback picture is unclear or noisy, or the oblique  
lines of the picture are rough, try to change to other modes.  
FILM  
Example:  
Center  
speaker  
Subwoofer  
Front right  
Suitable for playing back a film source disc.  
VIDEO  
Suitable for playing back a video source disc.  
Front left  
3.0 m  
2.7 m  
2.4 m  
7 SCREEN SAVER (A pg. 22)  
You can activate or deactivate Screen Saver function.  
2.1 m  
7 FILE TYPE  
When several types of files are recorded on a disc, you can select  
which files to play. If you have changed FILE TYPE setting, be  
Surround left  
Surround right  
sure to turn the power off, then turn the power on to enable the new  
setting.  
In this case, set the distance of each speaker as follows;  
AUDIO  
Distance of front speakers:  
Distance of center speaker:  
3.0 m  
2.7 m  
Select this to play MP3/WMA files.  
STILL PICTURE  
Select this to play JPEG files.  
VIDEO  
Distance of surround speakers: 2.4 m  
FRONT SPEAKER/CENTER SPEAKER/SURROUND  
SPEAKER  
Select this to play MPEG4 files.  
Adjust the distance from the listening position to the speakers.  
Within the range from 0.3 m to 9.0 m. (by 0.3 m)  
:Audio menu (AUDIO)  
7 D. RANGE COMPRESSION  
RETURN  
Returns to the SPK. SETTING menu.  
(Dynamic range compression)  
You can enjoy low level recorded sound clearly at night even at a  
low volume when listening to the sound with Dolby Digital.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Setting DVD preferences  
SET LEVEL  
Select this when you set the level of restriction.  
PASSWORD  
7 RESUME  
You can activate or deactivate Resume Playback function.  
(A pg. 29)  
This item is selected automatically when some changes  
are made on Parental Lock setting. Enter a four-digit  
number as your password with number buttons 0-9, then  
press ENTER.  
7 ON SCREEN GUIDE  
You can activate or deactivate the on-screen guide icons.  
(A pg. 20)  
If you have failed to enter your correct password three  
times, you cannot select an item other than EXIT. In such a  
case, press ENTER to exit the mode, then try the setting  
again.  
7 Parental lock menu (PARENTAL LOCK)  
EXIT  
Returns to OTHERS menu.  
You can restrict playback of a DVD VIDEO containing violent  
scenes that is not suitable for your other family members.  
This setting takes effect only for DVDs containing the Parental  
Lock level information Level 1 (most restrictive) to Level 8  
(least restrictive).  
Be sure to exit the Parental Lock setting mode after  
entering your password. Otherwise, the changes you made  
wont be stored.  
If you forget your password, enter 8888instead of your  
password.  
COUNTRY CODE  
Select this when you set the code for your resident.  
(A pg. 38)  
NOTE  
When you enter wrong passwords three times, you can only select  
EXIT.  
Country/Area codes list for Parental Lock  
A: AD (Andorra), AE (United Arab Emirates), AF (Afghanistan), AG  
(Antigua and Barbuda), AI (Anguilla), AL (Albania), AM (Armenia),  
AN (Netherlands Antilles), AO (Angola), AQ (Antarctica), AR  
(Argentina), AS (American Samoa), AT (Austria), AU (Australia), AW  
(Aruba), AZ (Azerbaijan)  
M: MA (Morocco), MC (Monaco), MD (Moldova, Republic of), MG  
(Madagascar), MH (Marshall Islands), ML (Mali), MM (Myanmar),  
MN (Mongolia), MO (Macau), MP (Northern Mariana Islands), MQ  
(Martinique), MR (Mauritania), MS (Montserrat), MT (Malta), MU  
(Mauritius), MV (Maldives), MW (Malawi), MX (Mexico), MY  
(Malaysia), MZ (Mozambique)  
N: NA (Namibia), NC (New Caledonia), NE (Niger), NF (Norfolk  
Island), NG (Nigeria), NI (Nicaragua), NL (Netherlands), NO  
(Norway), NP (Nepal), NR (Nauru), NU (Niue), NZ (New Zealand)  
O: OM (Oman)  
B: BA (Bosnia and Herzegovina), BB (Barbados), BD (Bangladesh),  
BE (Belgium), BF (Burkina Faso), BG (Bulgaria), BH (Bahrain), BI  
(Burundi), BJ (Benin), BM (Bermuda), BN (Brunei Darussalam), BO  
(Bolivia), BR (Brazil), BS (Bahamas), BT (Bhutan), BV (Bouvet  
Island), BW (Botswana), BY (Belarus), BZ (Belize)  
C: CA (Canada), CC (Cocos (Keeling) Islands), CF (Central African  
Republic), CG (Congo), CH (Switzerland), CI (Côte dIvoire), CK  
(Cook Islands), CL (Chile), CM (Cameroon), CN (China), CO  
(Colombia), CR (Costa Rica), CU (Cuba), CV (Cape Verde), CX  
(Christmas Island), CY (Cyprus), CZ (Czech Republic)  
D: DE (Germany), DJ (Djibouti), DK (Denmark), DM (Dominica), DO  
(Dominican Republic), DZ (Algeria)  
P: PA (Panama), PE (Peru), PF (French Polynesia), PG (Papua New  
Guinea), PH (Philippines), PK (Pakistan), PL (Poland), PM (Saint  
Pierre and Miquelon), PN (Pitcairn), PR (Puerto Rico), PT (Portugal),  
PW (Palau), PY (Paraguay)  
Q: QA (Qatar)  
R: RE (Réunion), RO (Romania), RU (Russian Federation), RW  
(Rwanda)  
E: EC (Ecuador), EE (Estonia), EG (Egypt), EH (Western Sahara), ER  
S: SA (Saudi Arabia), SB (Solomon Islands), SC (Seychelles), SD  
(Sudan), SE (Sweden), SG (Singapore), SH (Saint Helena), SI  
(Slovenia), SJ (Svalbard and Jan Mayen), SK (Slovakia), SL (Sierra  
Leone), SM (San Marino), SN (Senegal), SO (Somalia), SR  
(Suriname), ST (Sao Tome and Principe), SV (El Salvador), SY (Syrian  
Arab Republic), SZ (Swaziland)  
T: TC (Turks and Caicos Islands), TD (Chad), TF (French Southern  
Territories), TG (Togo), TH (Thailand), TJ (Tajikistan), TK (Tokelau),  
TM (Turkmenistan), TN (Tunisia), TO (Tonga), TP (East Timor), TR  
(Turkey), TT (Trinidad and Tobago), TV (Tuvalu), TW (Taiwan), TZ  
(Tanzania, United Republic of)  
U: UA (Ukraine), UG (Uganda), UM (United States Minor Outlying  
Islands), US (United States), UY (Uruguay), UZ (Uzbekistan)  
V: VA (Vatican City State (Holy See)), VC (Saint Vincent and the  
Grenadines), VE (Venezuela), VG (Virgin Islands (British)), VI (Virgin  
Islands (U.S.)), VN (Vietnam), VU (Vanuatu)  
(Eritrea), ES (Spain), ET (Ethiopia)  
F: FI (Finland), FJ (Fiji), FK (Falkland Islands (Malvinas)), FM  
(Micronesia (Fedelated States of)), FO (Faroe Islands), FR (France),  
FX (France, Metropolitan)  
G: GA (Gabon), GB (United Kingdom), GD (Grenada), GE (Georgia),  
GF (French Guiana), GH (Ghana), GI (Gibraltar), GL (Greenland), GM  
(Gambia), GN (Guinea), GP (Guadeloupe), GQ (Equatorial Guinea),  
GR (Greece), GS (South Georgia and the South Sandwich Islands), GT  
(Guatemala), GU (Guam), GW (Guinea-Bissau), GY (Guyana)  
H: HK (Hong Kong), HM (Heard Island and McDonald Islands), HN  
(Honduras), HR (Croatia), HT (Haiti), HU (Hungary)  
I: ID (Indonesia), IE (Ireland), IL (Israel), IN (India), IO (British Indian  
Ocean Territory), IQ (Iraq), IR (Iran (Islamic Republic of)), IS  
(Iceland), IT (Italy)  
J: JM (Jamaica), JO (Jordan), JP (Japan)  
K: KE (Kenya), KG (Kyrgyzstan), KH (Cambodia), KI (Kiribati), KM  
(Comoros), KN (Saint Kitts and Nevis), KP (Korea, Democratic  
Peoples Republic of), KR (Korea, Republic of), KW (Kuwait), KY  
(Cayman Islands), KZ (Kazakhstan)  
W: WF (Wallis and Futuna Islands), WS (Samoa)  
Y: YE (Yemen), YT (Mayotte), YU (Yugoslavia)  
Z: ZA (South Africa), ZM (Zambia), ZR (Zaire), ZW (Zimbabwe)  
L: LA (Lao Peoples Democratic Republic), LB (Lebanon), LC (Saint  
Lucia), LI (Liechtenstein), LK (Sri Lanka), LR (Liberia), LS (Lesotho),  
LT (Lithuania), LU (Luxembourg), LV (Latvia), LY (Libyan Arab  
Jamahiriya)  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Tuner operations  
IMPORTANT  
Before using the remote control for the  
following operation;  
1 Set the remote control mode selector to  
AUDIO.  
2 Press FM/AM.  
Setting the AM tuner  
interval spacing  
Some countries space AM stations 9 kHz apart, and other countries  
use 10 kHz spacing.  
9 kHz interval spacing is the initial setting.  
The buttons described below are used on pages 39 to 40.  
On the center unit ONLY:  
STANDBY  
VOLUME  
PHONES  
7 When AM is selected as the source  
To select the 10 kHz interval  
Press and hold 7, then press 8. 10k STEPappears on the display  
window.  
Remote control  
mode selector  
To select the 9 kHz interval  
Press and hold 7, then press 3. 9k STEPappears on the display  
window.  
Manual tuning  
1 Press FM/AM repeatedly to select the  
band.  
Example:  
When the system is tuned in to 810 kHz.  
Number buttons  
8 1 0 k  
2 Press TUNING 9/( repeatedly until  
you find the frequency you want.  
When you hold down the button until the system starts  
searching for stations and then release it, the system stops  
searching automatically when a station of sufficient signal  
strength is tuned in to.  
NOTE  
When a station of sufficient signal strength is tuned in, the TUNED  
indicator lights on the display window.  
When an FM stereo program is received, the ST indicator lights on the  
display window.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
See page 39 for button locations.  
Tuner operations  
Preset tuning  
Once a station is assigned to a channel number, the station can be  
quickly tuned in. You can preset 30 FM and 15 AM stations.  
reception mode  
When the stereo FM program currently tuned in is noisy, you can  
change the FM reception mode to improve the reception.  
7 To preset the stations  
7 While listening to an FM station  
1 Tune in the station you want to preset.  
Press FM MODE.  
The FM reception mode appears on the display window.  
Each time you press the button, the FM reception mode changes.  
AUTO MUTING:  
When a program is broadcast in stereo, you will hear stereo  
sound. (The ST indicator lights on the display window.) When in  
monaural, you will hear monaural sound. This mode is also  
useful to suppress static noise between stations. The AUTO  
MUTING indicator lights on the display window.  
MONO:  
If you want to store the FM reception mode for an FM  
station, select the reception mode you want. See Selecting  
the FM reception modebelow.  
Example:  
When the system is tuned in to 103.50 MHz.  
1 0 3 . 5 0 M  
2 Press MEMORY.  
Reception will be improved although you will lose the stereo  
effect. (The ST indicator goes off.) In this mode, you will hear  
noise until you are tuned in to a station. (The AUTO MUTING  
indicator also goes off.)  
While CHand “– –” are flashing:  
Reducing the noise of AM  
broadcast  
When listening to an AM broadcast with a lot of noise interference,  
you can change the Beat Cut mode to reduce the noise.  
3 Press number button(s) (1-10, +10) to  
select a preset number you want.  
For details on using the number buttons, see How to use the  
number buttons(A pg. 22).  
Example:  
When the preset channel 1 is selected.  
7 While listening to an AM station  
Press FM MODE.  
The current Beat Cut mode appears on the display window.  
Each time you press the button, the Beat Cut mode changes.  
Choose BEAT CUT 1or BEAT CUT 2according to which  
gives clearer sound.  
1 1 0 3 . 5 0 M  
If the setting is cancelled before you finish, start from step 2  
again.  
While the selected number is flashing:  
4 Press MEMORY.  
The selected number stops flashing.  
The station is assigned to the selected preset number.  
If the setting is cancelled before you finish, start from step 2  
5 aRgaeinp.eat steps 1 to 4.  
Storing a new station to a used number erases the previously  
stored one.  
1 Press FM/AM repeatedly to select FM or  
AM.  
2 Press number button(s) (1-10, +10) to  
select a preset number.  
For details on using the number buttons, see How to use the  
number buttons(A pg. 22).  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
AV COMPU LINK remote control system  
The AV COMPU LINK remote  
control system allows you to operate  
Available functions  
The AV COMPU LINK remote control system allows you to use  
the functions listed following.  
JVC TVs and VCRs through the center unit. This system is  
equipped with the AV COMPU LINK-III, which adds a function to  
operate JVCs video components via the video components  
terminals. To use this remote control system, you need to connect  
the video components you want to operate as follows.  
Refer also to the manuals supplied with your TV and video  
components.  
One-touch video play  
Simply by inserting a video cassette without its safety tab into the  
VCR, you can enjoy video playback without manually setting other  
switches. This system automatically turns on and changes the  
source to VCR.  
The TV automatically turns on and changes the input mode to the  
appropriate position so that you can view the playback picture.  
When you insert a video cassette with its safety tab in place, press  
the play (3) button on the VCR or on the remote control to get the  
same result.  
Connecting a TV and VCR  
CAUTION  
Before connecting;  
If you have already plugged your VCR, TV and the center unit into  
the AC outlets, unplug their AC power cords first.  
One-touch DVD play  
Simply by starting playback on the built-in DVD player, you can  
enjoy playback without manually setting other switches. The TV  
automatically turns on and changes the input mode to the  
appropriate position so that you can view the playback picture.  
1 Connect the center unit to a TV and  
VCR.  
2 CFoonr dneetacilst, tsheeepacgee n12taenrdu13n. it to a TV and VCR  
using the optional AV COMPU LINK  
cords.  
Automatic selection of TV input mode  
When you select DVD or VCR as the source to play on the system,  
the TV automatically changes the input mode to the appropriate  
position so that you can view the playback picture.  
Automatic Power On/Off  
The TV and VCR turn on and off along with the system.  
When you turn on the system;  
Center unit  
If the previously selected source is DVD, only the TV will turn  
on automatically.  
If the previously selected source is VCR, the TV and VCR will  
turn on automatically.  
When you turn off the system, the TV and VCR will turn off.  
NOTE  
If you turn off the system while recording on the VCR, the VCR will  
not turn off and will continue recording.  
AV COMPU LINK cord  
(not supplied)  
VCR  
TV  
3 Plug the AC power cords of the VCR, TV  
and the center unit into the AC outlets.  
4 Turn on the connected components  
When turning on the TV for the first time after the AV  
COMPU LINK connection, turn the TV volume to  
minimum using the TV volume control on the TV.  
When turning on the VCR, use the remote control supplied  
with this system. (Press F VCR/DBS.)  
NOTE  
To correctly use the automatic selection of TV input mode, select the  
correct M. OUTsetting. (A pg. 35)  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
References  
To clean the disc  
Wipe the disc with a soft cloth in a straight line  
from center to edge.  
DO NOT use any solvent such as  
conventional record cleaner, spray,  
thinner or benzine to clean the disc.  
Maintenance  
7 Handling Discs  
Remove the disc from its case by holding it at  
the edge while pressing the center hole lightly.  
Do not touch the shiny surface of the disc or  
bend the disc.  
7 Cleaning the system  
Stains on the system should be wiped off with a soft cloth. If the  
system is heavily stained, wipe it with a cloth soaked in water-  
diluted neutral detergent and wrung well, then wipe clean with a  
dry cloth.  
Put the disc back in its case after use to  
prevent warping.  
Be careful not to scratch the surface of the  
disc when placing it back in its case.  
Avoid exposure to direct sunlight, temperature  
extremes and moisture.  
Since the system may deteriorate in quality, become damaged or  
get its paint peeled off, be careful about the following.  
DO NOT wipe it with a hard cloth.  
DO NOT wipe it strong.  
DO NOT wipe it with thinner or benzine.  
DO NOT apply any volatile substance such as insecticides to it.  
DO NOT allow any rubber or plastic to remain in contact with  
it for a long time.  
Troubleshooting  
PROBLEM  
POSSIBLE CAUSE  
SOLUTION  
Power does not come  
on.  
The power cord and/or system cord is not connected.  
Connect the power cord and system cord correctly.  
(A pg. 13)  
The remote control does The batteries are exhausted.  
not work.  
Replace the batteries. (A pg. 7)  
Sunlight is falling directly on the remote sensor.  
Hide the remote sensor from direct sunlight.  
No sound.  
The system cord and/or speaker cord is not connected. Check the connection. (A pg. 12)  
The audio cord is not connected to AUDIO IN (VCR) Connect the cord correctly. (A pg. 13)  
and/or DIGITAL IN (DBS) correctly.  
An incorrect source has been selected.  
The decode mode is not set correctly.  
Select the correct source. (A pg. 17)  
Select the proper decode mode. (A pg. 35)  
Connect the cord correctly. (A pg. 12)  
Use a playable disc. (A pg. 3)  
No picture is displayed The video cord is not connected correctly.  
on the TV screen.  
The disc is not playable.  
No picture is displayed The scan mode is set to PAL PROG.or NTSC  
Change the scan mode to PALor NTSC.  
on the TV screen, the  
PROG.though the center unit is connected to the TV (A pg. 18)  
picture is blurred, or the which does not support the progressive video input  
picture is divided into  
two parts.  
such as a conventional TV.  
Video and audio are  
distorted.  
The disc is scratched or dirty.  
Replace or clean the disc.  
A VCR is connected between the center unit and the  
TV.  
Connect the center unit and TV directly. (A pg. 12)  
The picture does not fit The monitor type is not set correctly.  
the TV screen.  
Set MONITOR TYPEproperly. (A pg. 37)  
Hard to listen to  
broadcast because of  
noise.  
Antennas are disconnected.  
Reconnect the antennas correctly and securely.  
(A pg. 8)  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
References  
7 Subwoofer (SP-PWS8/SP-PWS5)  
Amplifier section  
Specifications  
Front/Center/Surround:  
80 W per channel, RMS at 6 C  
(Center/Surround)/120 W per channel,  
RMS at 4 C (Front)  
at 1 kHz, with 10 % total harmonic  
distortion.  
120 W, RMS at 4 C at 100 Hz, with  
10 % total harmonic distortion.  
7
Center unit (XV-THS8/XV-THS5)  
Audio section  
Total Harmonic Distortion 0.02 %  
NOTE: This value is measured at System cord CONNECTOR for  
Subwoofer:  
reference.  
Digital input*1:  
DIGITAL IN (DBS): 21 dBm to 15 dBm  
Speaker section  
Speaker unit:  
(OPTICAL)  
(660 nm E30 nm)  
16 cm Bass-reflex, Magnetically  
Shielded  
30 Hz to 200 Hz  
1
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital  
Surround (with sampling frequency 32 kHz, 44.1 kHz, 48 kHz)  
Frequency Range:  
Video section  
General  
Power Requirements:  
Video System:  
NTSC/PAL selectable  
500 lines  
64 dB  
AC 110 V/127 V/220 240 V  
selectable with the voltage selector,  
50 Hz/60 Hz  
Horizontal Resolution:  
Signal-to-Noise Ratio:  
Video output level  
Composite:  
(except for Hong Kong and Australia)  
1.0 V(p-p)/75 C  
AC 220 V  
(for Hong Kong only)  
AC 240 V , 50 Hz  
, 50 Hz  
S-video-Y:  
S-video-C:  
Component-Y:  
Component-PB/PR:  
1.0 V(p-p)/75 C  
0.286 V (0.3 V*2) (p-p)/75 C  
1.0 V(p-p)/75 C  
(for Australia only)  
110 W (at operation)  
0 W (in standby mode)  
0.7 V(p-p)/75 C  
Power Consumption:  
Dimensions (W M H M D):  
Mass:  
Video input sensitivity/Impedance (VCR IN)  
Composite:  
S-video-Y:  
S-video-C:  
1.0 V(p-p)/75 C  
1.0 V(p-p)/75 C  
0.286 V (0.3 V*2) (p-p)/75 C  
170 mm M 412 mm M 444 mm  
12.0 kg  
2
* For PAL system  
Tuner section  
Tuning Range  
FM:  
7 Satellite Speakers  
Front speakers (SP-THS9F)  
Speakers: 5.5 cm M 2,  
87.50 MHz to 108.00 MHz  
531 kHz to 1 602 kHz  
(at 9 kHz intervals)  
AM:  
3.0 cm  
Bass-reflex, Magnetically Shielded  
Power Handling Capacity: 120 W  
530 kHz to 1 600 kHz  
(at 10 kHz intervals)  
Impedance:  
Frequency Range:  
Dimensions (W M H M D):  
4 C  
General  
Power Requirements:  
95 Hz to 40 kHz  
AC 110 240 V  
(except for Hong Kong and Australia)  
AC 220 V , 50 Hz  
(for Hong Kong only)  
AC 240 V , 50 Hz  
(for Australia only)  
18 W (at operation)  
2.0 W (in standby mode)  
, 50/60 Hz  
250 mm M 1 103 mm M 250 mm  
3.67 kg  
Mass:  
Surround speakers (SP-THS9S)  
Speakers:  
5.5 cm M 2  
Bass-reflex, Magnetically Shielded  
Power Consumption:  
Dimensions (W M H M D):  
Mass:  
Power Handling Capacity: 80 W  
Impedance:  
Frequency Range:  
Dimensions (W M H M D):  
6 C  
435 mm M 57 mm M 319 mm  
3.0 kg  
90 Hz to 30 kHz  
250 mm M 1 103 mm M 250 mm  
Mass:  
3.77 kg  
Center speaker (SP-THS9C)  
Speakers: 5.5 cm M 2,  
3.0 cm  
Bass-reflex, Magnetically Shielded  
Power Handling Capacity: 80 W  
Impedance:  
6 C  
Frequency Range:  
90 Hz to 40 kHz  
Dimensions (W M H M D):  
209 mm M 85 mm M 92 mm  
Mass:  
0.87 kg  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
References  
7 Satellite Speakers  
Front speakers (SP-THS5F)  
Speakers:  
Woofer:  
Tweeter:  
8.0 cm  
1.5 cm  
Bass-reflex, Magnetically Shielded  
Power Handling Capacity: 120 W  
Impedance:  
4 C  
Frequency Range:  
90 Hz to 20 kHz  
Dimensions (W M H M D):  
106 mm M 139.5 mm M 102 mm  
Mass:  
0.67 kg  
Surround speakers (SP-THS7S)  
Speakers:  
8.0 cm  
Bass-reflex, Magnetically Shielded  
Power Handling Capacity: 80 W  
Impedance:  
6 C  
Frequency Range:  
80 Hz to 20 kHz  
Dimensions (W M H M D):  
111.5 mm M 139 mm M 106.5 mm  
Mass:  
0.52 kg  
Center speaker (SP-THS5C)  
Speakers:  
Woofer:  
Tweeter:  
8.0 cm  
1.5 cm  
Bass-reflex, Magnetically Shielded  
Power Handling Capacity: 80 W  
Impedance:  
6 C  
Frequency Range:  
90 Hz to 20 kHz  
Dimensions (W M H M D):  
137.5 mm M 105 mm M 108 mm  
Mass:  
0.67 kg  
Designs & specifications are subject to change without notice.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mains (AC) Line Instruction (not applicable for Hong Kong  
and Australia)  
SP-PWS8  
SP-PWS5  
CAUTION for mains (AC) line  
BEFORE PLUGGING IN, do check that your mains (AC) line voltage  
corresponds with the position of the voltage selector switch provided on the  
outside of this equipment and, if different, reset the voltage selector switch,  
to prevent from a damage or risk of fire/electric shock.  
EN  
© 2004 VICTOR COMPANY OF JAPAN, LIMITED  
Download from Www.Somanuals.com. All Manuals Search And Download.  
0404SKMIDEJEM  

Intel Switch 324632 003 User Manual
Jenn Air Oven 209630 User Manual
JVC Car Stereo System 1110DTSMDTJEIN User Manual
JVC CRT Television HV Z29V1 HV Z34L1 User Manual
JVC Speaker CS V624 User Manual
JVC VCR HR J270EK User Manual
Kane Industries Computer Hardware C6713CPU User Manual
Kawasaki Offroad Vehicle P9723 User Manual
Kenmore Washer Dryer 26 88752 User Manual
Klipsch Speaker RCX 3 User Manual