ENGLISH
HD-ILA TV
HD-Z70RF7
HD-Z61RF7
INSTRUCTIONS
HD-Z70RF7
LCT2135-001A-C
Download from Www.Somanuals.com. All Manuals Search And Download.
Please follow all the guidelines below
Warning
Never insert objects
into the cabinet
openings!
It may cause
a fatal electric
shock.
Take care when
children are near.
Never place anything on
the TV!
Placing liquids, open
flames, cloths, paper, etc.
on the TV may cause a fire.
Never expose to rain
or moisture!
To prevent fire or
electric shock, never
allow liquids to enter
the unit.
Do not allow the TV
to fall!
Do not rest your elbows on, or allow children
to hang from the TV.
There is a risk that the TV will fall and cause
injuries.
Hold the TV so as not to
scratch the screen!
If the TV is damaged
or behaving strangely,
stop using it at once!
Unplug the power cord and contact
your retailer.
Do not touch the screen when carrying the
TV.
Never cut or damage
the power cord!
Never try to repair
the TV yourself!
Do not hold by the
screen frame when
moving the TV!
If the AC plug is not
the right shape, or
the power cord is
not long enough,
use an appropriate
plug adapter or
extension cable.
(Consult your
If the problem cannot be solved in
“Troubleshooting” (P. 20), unplug
the power cord and contact your
retailer.
This could cause
the screen frame to
detach, causing the TV
to fall. Hold the TV as
illustrated on the right.
retailer.)
Follow this manual
regarding setup!
Connect only to a 110-240V, 50/60Hz AC
outlet.
Ensure ample room to
Never listen with
headphones at high
volume!
Unplug the power cord
when going out!
Make enough room for
inserting and removing
the power plug!
avoid overheating
“Installation requirements” (P. 7)
The power buttons
It may damage your hearing.
Never dismantle the rear
on the remote control
and the TV unit
panel!
Place the TV as near
as possible to the AC
outlet
The main power supply for this TV is
controlled by inserting or removing the
power plug.
cannot completely
It may cause an electric shock.
turn off the TV.
For more details on installation, usage and safety
Consult your retailer
(Make appropriate
Never block the
arrangements for
bedridden people.)
Make sure that the cooling process (P.
3) has completed before unplugging the
power cord.
ventilation holes!
It may cause overheating or a fire.
Handle screen with care!
Use a soft, dry cloth when cleaning.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Please follow all the guidelines below
Precautions
This TV uses a lamp to project the picture on the screen. Misoperations may shorten the lamp life or
cause malfunction of the lamp.
Before operating the TV, read all the instructions below.
When the power is turned
off, the cooling down is
performed
When the TV is turned off, the picture on
the screen disappears gradually. Once the
screen is dark, cooling down is performed for
about 1 minute.
During this cooling-down period, the LAMP
indicator blinks every 2 seconds.
Do not unplug the TV while the lamp is
cooling down. This may cause the internal
circuits and the lamp to overheat and shorten
the lamp life.
When the power is turned
on, the warming up
commences
Immediately after the TV is turned on, the
picture is displayed only dimly. It takes about
one minute for the lamp to warm up. Once
the lamp has warmed up, you can enjoy the
pictures at their normal brightness.
During this warming-up period, the LAMP
indicator blinks every 2 seconds.
This TV has a fan to cool the
lamp
When the lamp is hotter, the fan works
harder to cool the lamp. In such a case, the
noise of the fan becomes louder but it is not
malfunction.
Do not place the TV too
closely to wallpaper
The warm air from the air ducts may change
the colour of the wallpaper.
While the LAMP indicator is
blinking, the TV cannot be
turned off
While the LAMP indicator is
blinking, the TV cannot be
turned on
You can turn on the TV within 15 seconds
after turning off.
Keep children or pets away
from the air ducts
Long exposure to the warm air from the ducts
may cause a minor burn.
The lamp is a consumable
item
Never open the lamp cover
except when replacing the
lamp
Condensation on the lamp
and screen
Do not turn the power on and
off repeatedly in a short period
It subjects the TV and the lamp to stress and may
lead to malfunctions and shorten the lamp life.
When the lamp has blown, replace the lamp;
otherwise, the picture cannot be displayed.
For details “Replacing the lamp” (P. 4, 5)
Exposing the lamp is dangerous because...
When the heater is turned on or the TV is
moved from a cold place to a warm place,
droplets of water may form on the lamp and
screen. This is called condensation. If the TV
is used while this condensation is still present,
the picture may seem distorted, and the inside
of the screen may become dirty. In this case,
wait until the condensation has gone before
using the TV.
The lamp becomes extremely hot
while in use, it may cause a burn.
Touching metallic portion of the
lamp may cause electric shock.
Ultraviolet rays are emitted from the
lamp.
Follow the instructions on
“Replacing the lamp” when
replacing the lamp (P. 4)
Handle the lamp carefully and correctly;
otherwise, it may cause a burn or an electric
shock. In addition, it may shorten lamp life or
cause malfunction of the TV.
Do not keep the TV on for more
than 24 hours consecutively
The lamp life may be shortened.
Never replace the lamp
immediately after use
Since the lamp becomes extremely hot
while in use, it may cause a burn.
Do not project a still picture
for a long time
Because of the ILA characteristics, still picture
may stick on the screen. (The picture will
disappear over time.)
Never touch the lamp
glass
Dirt or oil from the finger may cause the
lamp to break.
Consult your retailer
For more details on installation, usage and safety
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Before replacing the lamp, read all the instructions.
Replacing the lamp
Turn the TV off
Wait until the LAMP
indicator stops blinking
Unplug the TV
The TV uses a lamp to project the picture onto the screen. When the lamp has blown or when the
picture becomes dark, replace the lamp.
1
Before replacing the lamp, read all the instructions carefully.
LAMP indicator and Power
lamp are refered as “LAMP
LED” and “POWER LED”
on the Instructions of
Replacement Lamp Kit TS-
CL110C.
If you feel unsure about replacing the lamp yourself
Consult your retailer
Preparation
Prepare the Replacement Lamp Kit
For purchasing the Replacement
Lamp Kit, consult your retailer.
Wait for at least 1 hour until the lamp has fully cooled
2
3
Use only the specified
Replacement Lamp Kit!
!
This lamp is for use with JVC
model televisions. Using the
lamp with a different television
or other product could cause a
malfunction and/or damage to
the television or lamp.
Remove the lamp unit
Replacement Lamp Kit:
TS-CL110C
Never replace the lamp before it has fully cooled!
• High-pressure mercury lamp
!
The lamp becomes extremely hot while in use, which may cause a burn. After turning off
the TV, wait for at least 1 hour.
Never attempt to replace the lamp with the TV plugged in!
!
Attempting to replace the lamp with the TV plugged in could lead to a severe electrical
shock.
When the lamp is near to its end...
Remove the lamp cover
The following message appears on the screen.
1
Lamp needs to replaced.
Refer to instructions book for replacement
instructions.
To make the message disappear
If you feel any warmth
near the lamp, DO NOT
!
After replacing the Lamp, please reset
timer in the TV menu.
TOUCH IT!
Press OK, if you do not want to see this
message again.
Philips head type screw
driver (cross-head type)
After the usage time of the lamp has reached to 6500 hours, this message appears every time you turn on
the TV.
Remove the lamp unit
2
Loosen
Remove
Possible causes of shortened lamp life
Do not drop
the lamp!
Turning on/off the TV repeatedly in a short amount of time
Keeping the TV turned on for more than 24 hours consecutively
HD-Z70RF7 is used for explanation on the illustrations on this Instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Install the NEW lamp unit
Reset the lamp timer
4
6
Display the menu bar
Unpack
1
1
Select “Set Up”
2
3
select
Set Up
Do not drop the lamp!
Never touch the glass
surface of the lamp!
Oils deposited from the finger may
cause a difference in temperature
when the lamp heats up to its
operating temperature, causing the
lamp to break.
next
!
Do not shock the glass surface of
the lamp!
Select “Lamp Timer Reset”
It may shatter the lamp causing injuries.
Set Up
select
Auto Program
Edit/Manual
Language
Video-1 Setting
Video-3 Setting
AI Volume
Video
Video
Off
Teletext Language
HDMI Setting
Insert
Re-tighten
PC Position
Lamp Timer Reset
2
Make sure the lamp sits securely
and flat in the housing area.
next
Finish
4
Press OK to Reset
the Lamp Timer
The Lamp Timer is
Reset Successfully
Finally, the lamp has been replaced!
7
Never dispose of the lamp with normal trash!
Reinstall the lamp cover
!
The lamp contains a small amount of mercury. For disposal or recycling information, please
contact your local authorities or consult your retailer.
3
Tighten the screw.
Dispose of it in the same way as disposing of fluorescent lamps.
Turn the TV on
Plug in the TV
5
“Lamp” (P. 21)
If the power lamp and LAMP indicator blink rapidly after turning on the TV
If the lamp unit is not installed securely
(e.g. flat in the lamp housing area), the
TV won’t turn on. In this case, reinstall
the lamp unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Names of all the parts
Front panel
Power On/Off
Mute
Power On / Off
Power lamp
ON: Lit (Blue)
OFF: Unlit
To change the brightness of the
Change the channel / page
power lamp
“Illumination” (P. 18)
LAMP indicator
HD-Z70RF7
Return to channel you want to
view
When this indicator blinks
(P. 13)
To teletext
“About the LAMP indicator” (Below)
Colour buttons
Switch between “TV / VCR / DVR
(P. 17)
/ DVD / AUDIO”
(P. 18)
Display on-screen menu
Return to TV / Watch video, etc.
(P. 14)
Select and confirm settings in
menues
HD-Z61RF7
Volume
Change the channel / page
To the previous screen
Power On/Off
Channel information
(P. 12)
Right side
panel
Switch between TV / AV
devices
(P. 10)
To headphones
Display on-screen menu
/ set
S-video input terminal
(VIDEO-4)
When watching TV / Video
Change the aspect ratio (P. 12)
Turn on “Cinema Surround” (P. 12)
Change channel / page
Video input terminal
(VIDEO-4)
(P. 13)
When viewing teletext
Audio input terminals
(VIDEO-4)
Volume
Hold the current page
Bookmark pages
Take a snapshot of the
screen (P. 15)
Reveal hidden pages
Enlarge the text
View in multi-picture
mode (P. 15)
Connecting terminals on the back of the TV “Connecting external devices” (P. 10)
About the LAMP indicator
Check accessories
The LAMP indicator blinks as follows.
Insert the batteries
When turning on the TV, the LAMP indicator blinks for
about 1 minute every 2 seconds.
The lamp is warming up. During this period, the TV cannot
be turned off.
Use two “AAA/LR03” dry cell batteries. Insert the
batteries from the
end, making sure the
and
Remote control
polarities are correct.
(RM-C1855)
After turning off the TV, the LAMP indicator blinks for
about 1 minute every 2 seconds.
Cooling is performed. During the cooling period, the TV
cannot be turned on.
If the LAMP indicator blinks rapidly
“Lamp” (P. 21)
Switch briefly between
teletext and TV
To index page
AAA/LR03 Batteries
For confirming
the TV works
(P. 16)
When watching TV
When operating a JVC VCR or
(P. 17)
DVD
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Basic connections
Please read the user manuals of each device carefully before setup.
It is necessary to connect an aerial to watch TV.
Connect with other devices “Connecting external devices” (P. 10)
Connect the aerial
Connect a VCR / DVD recorder
AERIAL
AERIAL
VIDEO-1
Back of the TV
Back of the TV
After all the connections have been made, insert the plug into an AC outlet.
Care when setting
Power requirements
Connect the power cord only to a 110-240V, 50/60Hz AC outlet.
VCR / DVD recorder
Installation requirements
To avoid overheating, ensure the unit has ample room.
Do not place the TV
After all the connections have been made, insert the plug into an AC outlet.
If both composite and S-VIDEO cable are connected, S-VIDEO will be enable.
too close to wallpaper
The warm air from the
air ducts may change
the colour of the
wallpaper.
Keep children or pets
away from the air
ducts
Long exposure to
the warm air from the
ducts may cause a
minor burn.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
After turning on the TV, it takes about 1 minute to
project the picture to its full brightness.
After turning off the TV, it takes about 5 seconds to
make the screen dark. After that, cooling is performed
for about 1 minute.
Initial settings
Set the menu language, installation location and automatically register the TV channels.
These channels can be edited later in “Editing channels” (P. 9).
“About the LAMP indicator” (P. 6)
The remote control doesn’t
work
Begin
1
2
Shown only when powering on for the first time.
Confirm the mode is set to “TV”.
The power button on the remote control can also be
used.
HD-Z70RF7
HD-Z61RF7
Select a language
When you press the Power button of the HD-Z61RF7,
recommend that press below of the button.
>
Language
select
set
Select the teletext language group
For the teletext language group
“Language group for teletext”
(P. 22)
If the characters are unreadable
“Language group for teletext”
(P. 22)
>
Teletext Language
select
Group-1
Group-2
Group-3
Group-4
Group-5
3
4
Automatically register channels
>> Auto Program
CH 28
TV
MENU
BACK
14%
Check what was registered
>
Edit
Edit channels
in “Editing channels” (P. 9)
PR
AV
01
ID
CH/CC
5
6
CH 21
CH 22
CH 23
CH 24
CH 25
CC 02
02
03
04
05
06
07
08
09
CC
03
CC 04
CC 05
To the previous screen
Exit
Confirm
If the “JVC” logo does not appear or if
you wish to make changes later
“Language”, “Teletext Language” and
“Auto Program” (P. 18)
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Editing channels
Edit the channels registered with “Auto Program” in “Initial settings” (P. 8).
Begin
Select a destination
Finish
Move a
>Edit
> Edit
4
When coming from “Initial settings” (P. 8), skip to
.
PR
AV
01
ID
CH/CC
PR
AV
01
ID
CH/CC
select
channel’s
position
CH 21
CH 22
CH 21
CH 22
CH 24
CH 25
CH 23
CC 03
CC 04
CC 05
02
03
04
05
06
07
08
09
02
03
04
05
06
07
08
09
CH 23
CH 24
CH 25
CC 02
CC 03
CC 04
CC 05
Display the menu bar
MOVE
move out
move in
1
Begin
Enter a channel name
Edit a
>Edit
>Edit
Select “Set Up”
enter the first
PR
AV
01
ID
CH/CC
PR
AV
01
ID
CH/CC
channel
name
(red)
CH 21
CH 22
CH 23
CH 24
CH 25
CC 02
CC 03
CC 04
CC 05
CH 21
CH 22
CH 23
CH 24
CH 25
CC 02
CC 03
CC 04
CC 05
character
select
02
03
04
05
06
07
08
09
02
03
04
05
06
07
08
09
2
ID
A
JVC
next column
set
Set Up
next
Select “Edit / Manual”
Begin
Select a CH / CC
Enter a number
Receives the
broadcast
signal.
Set Up
>Edit
select
>Edit
(green)
3
Auto Program
Edit/Manual
Language
PR
AV
01
ID
CH/CC
PR
AV
01
ID
CH/CC
select
CH 21
CH 22
CH 23
CH 24
CH 25
CC 02
CC
CH 21
CH 22
CH 23
CH 24
CH 25
CC 02
CC
CC 03
CC 04
Insert a
channel
02
03
04
05
06
07
08
09
02
03
04
05
06
07
08
09
Video-1 Setting
Video-3 Setting
AI Volume
Video
Video
Off
Teletext Language
HDMI Setting
PC Position
12
Lamp Timer Reset
INSERT
CC 03
CC 04
next
“CH/CC List” (P. 22)
Select a row
>
Edit
select
PR
AV
01
ID
CH/CC
4
CH 21
CH 22
CH 23
CH 24
CH 25
CC 02
Delete
(yellow)
02
03
04
05
06
07
08
09
>Edit
Delete a
channel
PR
AV
01
02
03
04
05
06
07
ID
CH/CC
CC
03
CH 22
CH 23
CH 24
CH 25
CC 02
CC 03
CC 04
CC 04
CC 05
To the previous
screen
DELETE
Edit
5
6
From high
From low
Begin
(blue)
Beginning channel search
frequencies frequencies
> Manual
> Manual
Auto-search begins,
and the nearest
Exit
(red)
(green)
ID
CH/CC
PR
10
11
12
13
14
15
16
17
ID
CH/CC
PR
10
11
CC 06
CC 06
CH 02 (B/G)
CH 08 (B/G)
12
13
14
15
16
17
frequency is imported.
Repeat the previous
steps until the
Finish
or
desired channel is
displayed
If you can not receive the
channel you want to view,
press to change the sound
system.
Adjust
>Manual
Register a
PR
ID
CH/CC
10
CC 06
CH 08 (I)
new channel
11
12
13
14
15
16
“Sound system in your
country or region” (P. 22)
MANUAL
(yellow) (blue)
Picture fine tuning
Sound fine tuning
/
Set
> Edit
ID
PR
CH/CC
select a system
10
CC 06
11
12
13
14
15
16
17
CH 08
Download from Www.Somanuals.com. All Manuals Search And Download.
9
VCR / DVD / other devices
Connecting external devices
You can connect many devices to the rear panel of the TV.
Please read the user manuals of each device before setup. (Connecting cables are not supplied with this TV.)
Plug in headphones
: signal direction
VCR / DVD recorder
VIDEO-1
DVD player
Game consoles
Video camera
(HDMI compatible)
Right side panel
Rear panel
HDMI-1
VIDEO-4
Set-top box
/ Digital broadcast
tuner
Analogue Audio input (HDMI-1)
“HDMI Setting” (P. 18)
VIDEO-2
VIDEO-3
DVD player
(HDMI compatible)
VCR / DVD
recorder
HDMI-2
VCR / DVD recorder
Amplifier
Connect a PC
AERIAL
OUT
(L)
(R)
Check for PC compatibility
“Technical information” (P. 22)
JVC’s VCR / DVD player
AV
COMPULINK
(AV COMPULINK compatible)
PC IN
AV COMPULINK
This feature makes playing video tapes or DVDs totally automatic.
Simply insert a pre-recorded media into your JVC brand VCR or DVD player and the device will automatically turn on and
begin playback. At the same time, using the AV CompuLink, the VCR or DVD player sends a signal to the television telling it to
turn on and switch to the proper video input.
Connect DVI devices to
“HDMI-1”
(P. 22)
Refer to your DVD or VCR’s instruction book for detailed connection information.
Watching videos
Input
Watching videos
Input
Watching videos
Input
Watching videos
Input
VIDEO-1
VIDEO-2
VIDEO-3
VIDEO-4
HDMI-1
OUT
Connecting
Video and sound signal of a TV channel
you are viewing s from this terminal
HDMI devices
Output
Output
Output
Output
HDMI-2
·
Component signal
/ S-VIDEO /
· S-VIDEO /
Composite signal
· Sound L / R
·
Component signal
Composite signal
· Sound L / R
/
· S-VIDEO /
Composite signal
· Sound L / R
Output
Input
Output
Input
· S-VIDEO /
Composite signal
· Sound L / R
Composite signal
· HDMI signal
· Sound L / R
(HDMI-1 only)
· Sound L / R
Use S-VIDEO
Use Component signal
“Switch between video and
component signal” (P. 14)
Use S-VIDEO
Use Component signal
“Switch between video and
component signal” (P. 14)
Use S-VIDEO
“Using S-VIDEO” (P. 14)
“Using S-VIDEO” (P. 14)
“Using OUT terminal” (P. 14)
“HDMI Setting” (P. 18)
HDMI-2 input does not support
analogue sound.
“Using S-VIDEO” (P. 14)
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Enjoying your new TV!
TV mode
TV and Text mode
Text mode
PAGE
13 Viewing teletext
Enlarge the text
To the index page
Watching TV
PAGE
View channel information
Change the aspect ratio
Hold the current page
Switch briefly between teletext and TV
Bookmark your favourite pages
Reveal hidden pages
Enjoy “Cinema Surround”
Register your favourite channels
12
PAGE
Personal preferences
18
Adjust the picture
Adjust the sound
Picture
Advanced settings
(sleep-timer / channel guard, etc.)
Basic settings
(channel settings, etc.)
PAGE
Watching
videos / DVDs
Watch high quality video (S-VIDEO)
Switch between video and component signal
PC position adjustments
14
Download from Www.Somanuals.com. All Manuals Search And Download.
11
After turning on the TV, it takes about 1 minute to project the picture to its normal brightness.
After turning off the TV, it takes about 5 seconds to make the screen dark. After that, cooling down is performed for about 1 minute.
“About the LAMP indicator” (P. 6)
Watching TV
Set to “TV”
PR List
PR List
Channels registered in
“Initial settings” will appear
here.
Channel information
AV
1
AV
01
02
03
04
05
06
07
08
09
Mute
Power on
Channel information
(No indication)
select
view
DISPLAY
select
The blue power lamp on
2
3
Select and view a channel
Select a page
the TV lights
Zoom
select
set
When set to “Auto”, the aspect ratio
will turn to the ratio obtained from the
information the TV received. Without
receiving aspect information, it will
be set to “4:3 Auto Aspect” (P. 19)
Not available for 1080i (1125i) / 720p
(750p) signals.
Press again to turn the screen off
and put the TV into standby mode.
Auto
Regular
Panoramic
14:9 Zoom
16:9 Zoom
16:9 Zoom Subtitle
Full
16 : 9 Zoom
Change the aspect
Select a channel
ratio
E.g.
ZOOM
Move the picture with
or while this bar is
displayed
In PC mode, “Regular” and “Full” can
be selected.
1 :
15 :
Move up or down a channel
High
Low
Mono
Off
: For stereo sound
up
Enjoy ambient
sound
CINEMA SURROUND
: For stereo sound (when the sound distorts in “High” mode)
: For mono sound (emulates a stereo-like sound)
: Turns off “Cinema Surround”
down
Cinema Surround
High
Switch between stereo / mono / bilingual
broadcasting
“Stereo /
·
” ( P. 18)
“MENU”
“
”
“Sound” “MaxxBass”
Emphasize bass
sound
select
High
MAXXBASS
level
Note
Off
Low
High
set
To completely turn off the TV, unplug the AC
plug after the LAMP indicator stops blinking.
Volume
Registered as return channel
Cancel
While the channel
is displayed
While the channel
is displayed
Basic operations using the side buttons
Always return to the
channel you want to
view
Return Plus
Programmed!
Return Plus
Canceled!
Hold down for
3 seconds
Hold down for
3 seconds
Power on
RETURN PLUS
TV/VIDEO
1
IN (VIDEO-4)
S-VIDEO
MENU/OK
CHANNEL
Recall the return channel
Change the
channel
CHANNEL
OVER
VIDEO
2
L/MONO
+
34
23
VOLUME
Return to the last
channel you were
viewing
Volume
R
-
AUDIO
RETURN
Current channel
Last channel
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Viewing teletext
This TV can display TV broadcasts and teletext on the same channel in two windows.
Hold the current page
When watching TV
Hold the
1
current page
HOLD
Press
again
Release
TV
TEXT
Enter a teletext page
2
Display hidden information
(answers to quizzes, etc)
Reveal
hidden pages
TEXT
Move up or down a page
REVEAL
up
down
View sub-pages
Double the size of the displayed text
.....
Enlarge the
text
to sub-page
SIZE
(RED) (GREEN) (YELLOW) (BLUE
)
Display your
favourites list
1
Select a coloured button to save your page to
Returns to page “100” or a previously
designated page
To the index
page
2
3
4
(red)
(green)
(yellow)
(blue)
Bookmark
your favourite
page
INDEX
Enter the number of the page to save
LIST MODE
Leave the current page open, while you
switch to watch TV
Switch briefly
from teletext
to TV
Save
CANCEL
Useful when running a page search.
Press the coloured button as in step 2
Recall your favourite page
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Watching videos / DVDs
Select the video source
Switch between video and component signal
AV Select
select
1
01
0
1
2
3
4
5
6
7
Video-1
Video-2
Video-3
Video-4
HDMI1
HDMI2
PC
Display the menu bar
or
1
watch
Select “Set Up”
Operate the connected device and play a video
select
2
2
Operate JVC recorders and other devices (P. 17)
Set Up
next
Select the video source using the side buttons
Select “Video-1 Setting” or “Video-3 Setting”
3
Set Up
TV/VIDEO
TV/VIDEO
select
Auto Program
Edit/Manual
Language
1
2
IN (VIDEO-4)
MENU/OK
Video-1 Setting
Video-3 Setting
AI Volume
Video
Video
Off
S-VIDEO
Teletext Language
HDMI Setting
PC Position
CHANNEL
Select the video source
Lamp Timer Reset
OVER
CHANNEL
VIDEO
L/MONO
+
Change setting
MENU/OK
VOLUME
R
-
3
AUDIO
select
set
4
: For composite
or S-video
signal
Video
Video
: For component
video signal
Component
PC position adjustment
Display the menu bar
1
2
Using S-VIDEO
If both composite and S-VIDEO cables are connected, S-VIDEO will be enable.
Select “Set Up”
Select “PC Position”
Set Up
select
next
select
Auto Program
Edit/Manual
Language
Video-1 Setting
Video-3 Setting
AI Volume
Video
Video
Off
Teletext Language
HDMI Setting
PC Position
Using OUT terminal
Component and PC signals do not come out from this terminal.
Set Up
next
Lamp Timer Reset
When you are viewing video signal, no signal will come out through the S-VIDEO terminal.
HDMI-1 and HDMI-2 inputs does not come out from this terminal.
Shown only when “PC” is selected.
adjust
>PC Position
(blue)
3
Reset position
set
Download from Www.Somanuals.com. All Manuals Search And Download.
14
1
2
Useful functions
select “Features”
Still picture
Features
next
Take
Features
Set a time for
the TV to turn
itself off
select “Sleep Timer”
snapshots of
Current programme
the screen
Sleep Timer
Channel Guard
Appearance
Blue Back
Type A
On
3
Cancel
FREEZE
Child Lock
On
Auto Shutoff
Favourite Setting
Illumination
On
SLEEP TIMER
Press “ ” again, or change the channel
Bright
next
Not available when the Sub-picture (below) is displayed, or when
in PC mode.
You cannot save or export the snapshot.
>
Sleep Timer
select a time in minutes
Off
4
set
Select the number
of screens
Cancel Set the time to “0” in step 4
You can confirm the remaining time in step 4, after
repeating this process.
Remaining time
select
After steps 1 and 2 above
set
Features
select
“Channel Guard”
Sleep Timer
Channel Guard
Appearance
Selecting “
”
returns to normal viewing mode
Type A
On
3
Blue Back
Child Lock
On
Not available in PC mode.
Auto Shutoff
Favourite Setting
Illumination
On
Bright
Watch in dual-picture mode
E.g. You can watch TV and video at the same time.
>
Set ID No.
enter an “ID No.”
(a secret number of your choice)
(For wide aspect ratio signals)
4
5
to the next column
set
Main
Main
Sub
Sub
Watch in
multi-picture
mode
>>Channel Guard
select a channel to lock
Stop children
from watching
specific
PR
AV
01
CH/CC
ID
Switch between the
sound sources
Change the channel
(Main)
CH 21
CH 22
CH 23
CH 24
CH 25
CC 02
02
03
04
05
06
MULTI-PICTURE
channels
CHANNEL GUARD
>>Channel Guard
(Sub)
(blue)
Lock more channels
Repeat steps 5 and 6
PR
AV
01
CH/CC
ID
CH 21
CH 22
CH 23
CH 24
CH 25
CC 02
02
03
04
05
06
Select a channel in 12-screen mode
All registered channels are displayed as still images.
6
7
select a channel
Main
watch
Press “(blue)” again in step 6
Only the selected frame has a
moving picture.
Release a channel
View a locked channel
Use the numerical buttons to enter the
channel number. When appears, press
Move up or down a page
Not available for HDMI-1 or HDMI-2 input.
“
” and enter your “ID No.”. (If you forget
your “ID No.” check it in step 4.)
Download from Www.Somanuals.com. All Manuals Search And Download.
15
(continued)
Useful functions
“MENU”
“
”
“Features” “Blue Back”
select
While the channel is
displayed
On
Off
On
1
: Function is
turned off
: Displays a
blue screen
Displays a
blue screen
and mute the
sound when
the signal is
weak
set
Hold down for
3 seconds
Set
1 - 4?
Press the number to
register it on
12
12
BLUE BACK
2
Programmed!
Disappears in a few seconds
When the signal is weak or
absent
Displays a blue screen and
mute the sound
Recall the favourite channel
1
“MENU”
“
”
“Features” “Auto Shutoff”
select
Favourite
1 - 4?
Register a
channel to a
button
FAVOURITE
CHANNEL
On
Off
On
Press the number you
registered
1
: Function is
turned off
: Set the
power to
turn off
Set the power
to turn off if
no signal is
received and
no operation
is performed
2
set
Customizations (P. 18) to the picture of a favourite channel get
saved as well.
AUTO
SHUTOFF
Check your favourite channels
Press “ ” and confirm that the channels you have registered have
marks beside them
When no signal is received
and no operation is performed
for about 15 minuites
The power turns off
Delete a favourite channel
“MENU”
“
”
“Features”
“Favourite Setting”
1
2
> Favourite Setting
select
1
2
3
4
PR 01
PR 03
PR 05
PR 07
“MENU”
“
”
“Set Up” “AI Volume”
select
Prevent
sudden
increase or
decrease of
sound when
changing
channels
On
Off
On
delete
(blue)
> Favourite Setting
1
: Function is
turned off
: Set to
prevent
set
PR 01
2
3
4
PR 03
sudden
increase or
decrease of
sound
PR 07
AI VOLUME
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Operate JVC recorders and other devices
The included remote control can be used to operate JVC recorders and other devices.
Select a device
1
VCRs
DVD recorders
HDD recorders
Operate DVD / HDD recorder menues
Display menu
Playback / Record etc.
Home theater
system
Rewind / Playback
/ Fast-forward
Operate the
VCR, DVD
Select
Record / Stop / Pause
recorder or
TV (P. 12)
DVD players
HDD recorder
VCR/DVR
Display top menu
Back to previous
menu
OK
TV
VCR/DVR
Select a chapter
Display the subtitle (DVD / HDD recorder mode)
Operate DVD menues
AUDIO
DVD
The indicator lights for 3 seconds each time
the remote control is operated.
Playback etc.
Display menu
Rewind / Playback
/ Fast-forward
Turn on the device
Select
2
3
Operate the
DVD player
Stop / Pause
DVD
Display top menu
Back to previous
menu
OK
Select a chapter
Operate the device
Other buttons can be used to operate the TV
at any time.
Display the subtitle
Playback etc.
Operate AUDIO menues
Try changing the remote control code if you
cannot operate a recorder.
Display menu
Rewind / Playback
/ Fast-forward
Select
Code A or 1 (Default)
Code C or 3
Stop / Pause
Operate the
home theatre
system
Display top menu
Back to previous
menu
Press and hold
Press and hold
OK
Select a chapter
AUDIO
Display the subtitle
Mute
Confirm the code for your recorder by checking the manual it came with.
Some models of JVC devices cannot be operated with this remote control.
JVC DVD recorders and HDD recorders are set to code “C” or “3” by default.
Volume
Note
Select a surround mode
If the battery is removed, the remote control code reverts back to code A or 1.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Menu
Item
Picture Mode
Iris
Adjustments / Configurations
Picture mode (Bright / Standard / Soft)
Customizing your TV
Adjust the amount of light projected on the screen (Darker
Brighter)
Contrast (Lower
Brightness (Darker
Sharpness (Softer
Colour (Lighter
Higher)
Brighter)
Sharper)
Deeper)
Greenish)
Contrast
Bright
Display the menu bar
1
Sharp
Colour
Tint for NTSC (Reddish
Tint
Select a menu
Selected menu’s title
Colour temperature (Warm / Mid / Cool)
Finer picture adjustments (P. 19)
White Balance
Features
select
2
Picture
Picture
Sound
Features
Set Up
Mode / Language ( : Mono /
: Stereo / : Sub1 / : Sub2 / MONO)
Stereo /
·
next
Low tones (Weaker
High tones (Weaker
Stronger)
Stronger)
Bass
Treble
Balance
Select an item
Speaker balance (Left Stronger
Right Stronger)
select
3
Ambience level (High / Low / Mono / Off)
Cinema Surround
*1
Emphasize the bass sound (Off / Low / High)
Sound enhancement technology (On / Off)
Timer for turning off the TV (P. 15)
MaxxBass
Voice Enhancer
Sleep Timer
Stops children from watching specific channels (P. 15)
Format for displaying the channel number (TYPE A / TYPE B)
Channel Guard
Appearance
To the previous
screen
Items
Displays a blue screen and mutes the sound when the signal is weak or
absent (P. 16)
Blue Back
Adjust / Configure
adjust /
Disables the front control buttons of the TV (On / Off)
Child Lock
4
select
Set the power to turn off if no signal is received and no operation is performed
for about 15 minuites. (P. 16)
Standard
Exit
Picture Mode
Auto Shutoff
Favourite Setting
Illumination
Clear favourite channel settings (P. 16)
set
Change the brightness of the Power lamp (P. 6) while the TV is on
(Bright / Soft)
The menu disappears
after one minute of
inactivity.
Automatically registers channels (P. 8,
)
Auto Program
Edit / Manual
Language
When adjusting with the sliding-bar
Change registered channels or add new ones (P. 9)
adjust
set
Select a language for on-screen menus (P. 8,
For use with VCRs and other devices (P. 14)
For use with VCRs and other devices (P. 14)
)
Video-1 Setting
Video-3 Setting
Move
Prevent sudden increase or decrease of sound when changing channels
(P. 16)
AI Volume
Select a language for Teletext programmes (P. 22)
Teletext Language
HDMI Setting
When selecting from presets
HDMI-1 : Size (1 / 2 / Auto) HDMI-2 : Size (1 / 2 / Auto)
Audio (Digital / Analogue / Auto)
select
set
PC position adjustment (P. 14)
Resets the lamp timer (P. 5)
PC Position
Standard
The item will change.
Lamp Timer Reset
· Change the aspect ratio “ZOOM” (P. 12)
· Turn on “Cinema Surround” “CINEMA SURROUND” (P. 12)
Other settings
Some items have a sub-menu.
*1 MaxxBass is a registered trademark of Waves Audio Ltd. in the USA, Japan and other countries.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Advanced picture adjustment
By default, the TV automatically adjusts itself for the best picture.
Off
Min
Max
Auto
For smooth
Super
: Function is
turned off
: When the
picture loses
sharpness
: When
much noise
appears
: Automatically
adjusts
Auto
Display the menu bar
DigiPure
looking picture
1
2
Off
On
Auto
: Function is
turned off
: Function is
always on
: Automatically
adjusts
For smoothing
cinema film
Pull Down
Auto
On
Select “Picture”
select
Picture
Off
On
: Function is
turned off
: Maintains a natural
colour balance
Colour
Management
For natural-
looking pictures
next
Select “Features”
Select an item
select
Off
On
3
4
: Function is
turned off
: Makes it easier to view
bright / dark pictures
Fix bright /
Picture
On
Management dark pictures
next
Not available when
“Picture Mode” is set to
“Bright” (P. 18)
Off
On
Advanced
Fix brightness
Smart
: Function is
turned off
: Make it easier to
view white areas
On
On
select
next
of white areas
Picture
To the previous
screen
Off
On
To reduce
MPEG video
noise
E.g. “Super DigiPure”
MPEG
: Function is
turned off
: When noise
appears
Noise
Reduction
Change settings
Exit
select
5
6
1
Select the screen to change settings for
Main Sub
: Main picture
Auto
>> Colour System
Super DigiPure
: Sub-picture in MULTI-PICTURE mode
(P. 15)
The menu disappears
after one minute of
inactivity.
Main
Sub
Auto
PAL
E.g. “Super DigiPure”
When there is
no colour
Colour
System
2
Select the colour system
PAL SECAM
NTSC 3.58
NTSC 4.43
Auto
Finish
For colour system in your country or region.
“Colour system in your country or region” (P. 22)
Select a default aspect ratio for Auto in “Zoom” (P. 12)
>> 4:3 Auto Aspect
Panoramic
Regular
14:9 Zoom
Panoramic
Regular
Set a default
aspect ratio
4:3 Auto
Aspect
14:9 Zoom
16 : 9
4 : 3
14 : 9
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Troubleshooting
Problem
Actions
page
Severe noise or snow
Unplug the TV, and wait about 1 hour until the lamp
completely cooled. Then plug the TV in again. (Turning on the
TV soon may shorten the lamp life.)
Remote control stops
working
-
Front control buttons do
not work
Switch “Child Lock” to “Off.”
18
12
Is the TV connected correctly to the
aerial?
Change the direction of the aerial.
Is the aerial or its cable damaged?
Consult your retailer
Aspect ratio changes
unintentionally
Press “
” to return to your settings.
Although the HD-ILA element is manufactured with high-
precision technology, please understand that some pixels
may be lost or permanently displayed.
Black or white dots
-
appear on the screen
Patterns, stripes or
noise
I can’t turn it on!
Is the power cord connected to the AC
outlet correctly?
PC screen alignment is
off
Adjust the “PC Position.”
Adjust the “Iris” brighter.
14
18
The screen is dim
Is the aerial receiving interference
from high-voltage power lines or
wireless transmitters?
Consult your retailer
Are connected devices too close to
the TV?
Insert the minimum distance
between the aerial and the cause
of interference until no interference
Unnatural colour >>> Adjust “Colour” and “Bright.”
Check your “Colour System.”
18
19
If “Auto” is selected, select the specific
colour system manually.
Noise >>> Set to the following functions.
-
18
19
-
18
19
Poor picture quality
Picture Mode :
Standard
Super DigiPure : Max
Dull picture >>> Set to the following functions.
Picture Mode :
Bright
Ghosting
Super DigiPure : Min
The remote
(Doubling of images)
control doesn’t
work!
Are the batteries flat?
If the top of the image is distorted, check the video signal
quality itself.
If movement appears unnatural when receiving a signal from
a DVD player, etc. with 625p (progressive-scanning), change
the output setting of the external device to 625i (interlace-
scanning).
-
-
Are you more than 7 metres away from the TV?
Is the “MODE (TV, VCR/DVR, DVD, AUDIO)” set to “TV”?
When viewing teletext, the TV menu bar does not appear.
Depending on the stability of the signal, there may be a time
lag when changing channels.
Strange picture when
using an external device
Are you receiving interference from
signals reflected off mountains or
buildings?
Adjust the direction of your aerial,
or change to a good-quality
directional aerial
Blue screen appears on
the screen
Switch “Blue Back” to “Off.”
16
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Problem
Actions
page
Problem
Actions
page
Keep the TV off for a while and then turn the power on
again. If the TV goes into warning mode, unplug the TV
after the cooling has completed and consult your retailer. (It
may be a malfunction of the internal electrical circuits.)
Adjust the “Bass” and “Treble.”
18
18
9
If receiving a poor signal in “Stereo /
·
”, switch to “Mono.”
Poor sound
The LAMP indicator
blinks rapidly
-
Adjust the channel reception using “Manual.”
“Voice Enhancer” does
not work
“AI Volume” makes the effect of “Voice Enhancer” weak.
Switch “AI Volume” to “Off.”
18
Keep the TV off for a while and then turn the power on
again. If the TV goes into warning mode, unplug the TV
after the cooling has completed and consult your retailer.
(The internal temperature rises abnormally or the fan may
be blocked.)
The power lamp and
LAMP indicator blink
alternately
-
Switch “Size” in “HDMI Setting” to “1” or “2.”
Use the cable with HDMI logo.
Wrong screen size
18
No picture, no sound
-
If this condition occurs soon after replacing the lamp,
reinstall the new lamp unit. (The lamp unit may not be
inserted into the lamp housing correctly.)
Repeat the lamp installation steps, taking care to observe
all warnings.
- Make sure the lamp sits flat inside the housing area.
- Make sure the lamp cover is reinstalled.
If this condition occurs except for replacing the lamp, keep
the TV off for a while and then turn the power on again. If
the TV goes into warning mode, unplug the TV after the
cooling has completed and consult your retailer. (It may be
a lamp malfunction.)
6
Check if the device is compliant with HDMI.
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for
HDMI devices, or “Analogue” or “Auto” for DVI devices.
(Not available for HDMI-2)
The power lamp and
LAMP indicator blink
rapidly simultaneously
-
18
No sound
-
Green and distorted
screen
Wait a little for the signal to stabilize when switching the
signal format for an “HDMI” device.
-
-
Some functions do not
work
It is not a malfunction. Some functions (dark background) in
the menu do not work depending on the situation.
Some inputs cannot
be selected in the sub-
picture
“VIDEO-1 (Component signal)”, “VIDEO-3 (Component
signal)”, “HDMI-1”, “HDMI-2” inputs and PC mode cannot be
selected in the sub-picture.
-
14
Some inputs are not output from the OUT terminal.
No picture, no sound
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Technical information CH/CC List
To use the INSERT function (P. 9), find the “CH/CC” number corresponding to the TV’s Channel number from this
Language group for teletext
table.
Group
Languages
US:
CCIR:
OIRT:
The US channel numbers are the channel numbers used in the United States, Philippines, etc.
The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc.
The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc.
Group-1
Group-2
Group-3
Group-4
Group-5
Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese, Greek, Swedish, Finnish
Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, Hungarian, German, French, Italian, Swedish, Finnish
Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian, Croatian, Slovenian, Czech, Slovak, English, German
Arabic, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish, Portuguese, Swedish, Finnish
Farsi, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish, Portuguese, Swedish, Finnish
AUSTRALIA: The AUSTRALIA channel numbers are the channel numbers used in Australia, etc.
If the characters are unreadable. Select different teletext language group.
Channel
R1
Channel
CH
CH 02
CC
CC 01
US
US-02
CCIR
OIRT
AUSTRALIA
AU-0
US
CCIR
OIRT
AUSTRALIA
AU-5
E2
S-1
Colour system in your country or region
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CH 17
CH 18
CH 19
CH 20
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CH 27
CH 28
CH 29
CH 30
CH 31
CH 32
CH 33
CH 34
CH 35
CH 36
CH 37
CH 38
CH 39
CH 40
CH 41
CH 42
CH 43
CH 44
CH 45
CH 46
CH 47
CH 48
CH 49
CH 50
CH 51
CH 52
CH 53
CH 54
CH 55
CH 56
CH 57
CH 58
CH 59
CH 60
CH 61
CH 62
CH 63
CH 64
CH 65
CH 66
CH 67
CH 68
CH 69
US-03
US-04
US-05
US-06
US-07
US-08
US-09
US-10
US-11
US-12
US-13
US-14, W+29
US-15, W+30
US-16, W+31
US-17, W+32
US-18, W+33
US-19, W+34
US-20, W+35
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
AU-1
AU-2
AU-6
AU-7
AU-8
AU-9
CC 02
CC 03
CC 04
CC 05
CC 06
CC 07
CC 08
CC 09
CC 10
CC 11
CC 12
CC 13
CC 14
CC 15
CC 16
CC 17
CC 18
CC 19
CC 20
CC 21
CC 22
CC 23
CC 24
CC 25
CC 26
CC 27
CC 28
CC 29
CC 30
CC 31
CC 32
CC 33
CC 34
CC 35
CC 36
CC 37
CC 38
CC 39
CC 40
CC 41
CC 42
CC 43
CC 44
CC 45
CC 46
CC 47
CC 48
CC 49
CC 50
CC 51
CC 52
CC 53
CC 54
CC 55
CC 56
CC 57
CC 58
CC 59
CC 60
CC 61
CC 62
CC 63
CC 64
CC 75
CC 76
CC 77
CC 78
CC 79
CC 95
CC 96
CC 97
CC 98
CC 99
S-2
S-3
S-4
S-5
S-6
S-7
S-8
S-9
R2
R6
R7
R8
R9
Area
Country or Region
System
PAL
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc. Indonesia, Malaysia, Singapore, Thailand, India, etc.
AU-5A
China, Vietnam, etc.
Asia, Middle East
Hong Kong, etc.
R10
R11
R12
AU-10
AU-11
SECAM
NTSC
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
S-10
S-11
S-12
S-13
S-14
S-15
S-16
S-17
S-18
S-19
S-20
S-21
S-22
S-23
S-24
S-25
S-26
S-27
S-28
S-29
S-30
S-31
S-32
S-33
S-34
S-35
S-36
S-37
S-38
S-39
S-40
S-41
SECAM
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
Europe
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
W+1
W+2
W+3
W+4
W+5
W+6
W+7
W+8
W+9
W+10
W+11
W+12
W+13
W+14
W+15
W+16
W+17
W+18
W+19
W+20
W+21
W+22
W+23
W+24
W+25
W+26
W+27
W+28
PAL
PAL
PAL
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
US-21, W+36 E21
US-22, W+37 E22
US-23, W+38 E23
US-24, W+39 E24
US-25, W+40 E25
US-26, W+41 E26
US-27, W+42 E27
US-28, W+43 E28
US-29, W+44 E29
US-30, W+45 E30
US-31, W+46 E31
US-32, W+47 E32
US-33, W+48 E33
US-34, W+49 E34
US-35, W+50 E35
US-36, W+51 E36
US-37, W+52 E37
US-38, W+53 E38
US-39, W+54 E39
US-40, W+55 E40
US-41, W+56 E41
US-42, W+57 E42
US-43, W+58 E43
US-44, W+59 E44
US-45, W+60 E45
US-46, W+61 E46
US-47, W+62 E47
US-48, W+63 E48
US-49, W+64 E49
US-50, W+65 E50
US-51, W+66 E51
US-52, W+67 E52
US-53, W+68 E53
US-54, W+69 E54
US-55, W+70 E55
US-56, W+71 E56
US-57, W+72 E57
US-58, W+73 E58
US-59, W+74 E59
US-60, W+75 E60
US-61, W+76 E61
US-62, W+77 E62
US-63, W+78 E63
US-64, W+79 E64
US-65, W+80 E65
US-66, W+81 E66
US-67, W+82 E67
US-68, W+83 E68
US-69, W+84 E69
SECAM
Egypt, Morocco, etc.
Sound system in your country or region
Area
Country or Region
System
B/G
D/K
I
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc. Indonesia, Malaysia, Singapore, Thailand, India, etc.
China, Vietnam, etc.
Asia, Middle East
Hong Kong, etc.
B/G
M
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
D/K
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
Europe
B/G
I
B/G
I
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
B/G
Egypt, Morocco, etc.
Monoaural sound
Use this function when stereo sound or bilingual sound is hard to hear.
Set “Stereo /
·
” to “Mono.” (P. 18)
PC Signals that can be displayed
If the signal doesn’t appear, check that the vertical
frequency on the PC is set to 60 Hz.
Resolution
640 x 480 (VGA) 1024 x 768 (XGA)
Vertical frequency (Hz)
Horizontal frequency (kHz)
60.0
31.5
60.0
48.4
X
Y
Z
Z+1
Z+2
Connect DVI devices
Connect a “DVI“ device to “HDMI-1” using “DVI-HDMI” conversion cable. Connect analogue sound output of the
DVI device to L and R terminals in IN HDMI-1.
Set “Audio” in “HDMI Setting” to “Analogue” or “Auto” (P. 18)
HDMI-2 input does not support analogue sound (IN HDMI-1).
HDMI-2 input does not support DVI devices.
R3
R4
R5
AU-3
AU-4
A-5
A-4
A-3
A-2
A-1
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Specifications
Main unit
Terminals / Connectors
Terminal name
Terminal type
Signal type (IN)
Signal type (OUT)
Model
HD-Z70RF7
HD-Z61RF7
Composite video, S-video,
Analogue component
(576i (625i) / 480i (525i),
Broadcasting systems
Colour systems
B / G / I / D / K / K1 / M (See “Technical information”, P. 22)
PAL, SECAM, NTSC 3.58/4.43MHz
VHF low channel (VL) = 46.25 to 140.25 MHz
VHF high channel (VH) = 147.25 to 423.25 MHz
UHF channel (U) = 431.25 to 863.25 MHz
· Receives cable channels in mid band (X to Z+2, S1 to S10), super band (S11 to
S20) and hyper band (S21 to S41).
NICAM (I / B / G / D / K), A2 (B / G / D / K)
FLOF (Fastext), WST (standard system)
AC 110 V - 240 V, 50/60 Hz
RCA connectors x 6
S-VIDEO connector x 1 Progressive : 576p (625p) / 480p (525p),
VIDEO-1
HD : 1080i (1125i), 720p (750p)
Audio L / R
Composite video, S-video,
)
Channels and frequencies
RCA connectors x 3,
S-VIDEO connector x 1 Audio L / R
VIDEO-2
Composite video,
Sound-multiplex systems
Teletext systems
Analogue component
(576i (625i) / 480i (525i),
VIDEO-3
RCA connectors x 6
RCA connectors x 3,
S-VIDEO connector x 1 Audio L / R
HDMI
Input terminals
Progressive : 576p (625p) / 480p (525p),
Power requirements
HD : 1080i (1125i), 720p (750p)
)
Audio output (Rated power output) 10 W + 10 W
Audio L / R
Speakers
10 cm round x 2
(8.5 x 12.5cm) oval x 2
Composite video, S-video,
VIDEO-4
HDMI-1
HDMI-2
195 W
Power consumption
[standby]
[0.9 W]
(576i (625i) / 480i (525i) /
576p (625p) / 480p (525p),
1080i (1125i), 720p (750p))
Audio L / R
Analogue PC signal (P. 22)
Screen size
(
HDMI connector x 2
178 cm
155 cm
visible area size measured diagonally)
Dimensions (W x H x D: mm)
Weights
1626 x 1167 x 519
1403 x 1015.5 x 483.6
IN HDMI-1
PC IN
RCA connectors x 2
D-SUB (15 pins) x 1
g
g
44 k
70 k
Accessories
(See “Check accessories”, P. 6)
Composite video
,
RCA connectors x 3,
S-VIDEO connector x 1
OUT
S-video,
Output
Audio L / R
terminals
Stereo mini-jack x 1
(3.5 mm in diameter)
Headphone
output
Headphone
We may change the design and specifications without notice.
Demonstration
To start the demonstration:
Press the MENU button to display the menu bar. Then press the yellow button.
Select DEMO 1 (Super Digipure), DEMO 2 (Maxx Bass) or DEMO 3 (Iris Meter) from the DEMO MODE
menu.
Press the
/
buttons, then press the OK button.
To quit the demonstration:
Press the yellow button, BACK button, CHANNEL
/
buttons or any of the number buttons.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
C
2006 Victor Company of Japan, Limited
1006TKH-MW-BJ
Download from Www.Somanuals.com. All Manuals Search And Download.
|