LCD Flat Television Users Guide
For Models:
LT-37X898
LT-42X898
LT-47X898
Illustration of LT-42X898 and RM-C1400
Important Note:
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this
guide. Keep this user’s guide in a convenient place for future reference. Keep the carton
and original packaging for future use.
Model Number:
LCT2329-001A-A
0807TNH-II-IM
Serial Number:
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT RECYCLING INFORMATION
This product has a fluorescent lamp that contains mercury. Disposal
of these materials may be regulated in your community due to
environmental considerations. For disposal or recycling information,
please contact your local authorities or for USA, the Electronic Industries
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
16) Avoid improper installation and never position the unit where good ventilation is impossible.
When installing this TV, distance recommendations must be maintained between the set
and the wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the
minimum distance guidelines shown for safe operation.
200 mm
200 mm
50 mm
150 mm
150 mm
17) Cautions for installation
— Do not tilt the TV towards the left or right, or towards the back.
— Install the TV in a corner on the floor so as to keep cords out of the way.
— The TV will generate a slight amount of heat during operation. Ensure that sufficient
space is available around the TV to allow satisfactory cooling.
18) Make enough room for inserting and removing the power plug. Place the TV as close
to the outlet as possible. The main power supply for this TV is controlled by inserting or
removing the power plug.
19) Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
20) When this TV is connected to the wall outlet, it is always on standby even when all the LED
lamps are not lit. To shut down the TV, unplug the TV from the wall outlet.
FCC Notice:
Caution: Changes or modifications not expressly approved by party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings
We have an important note for customers who subscribe to basic cable services (do not have
a separate cable box) and plan to use their JVC TV remote control to select channels.
Once you run the Auto Tuner Setup (which detects and programs all the channels your TV is
receiving through the RF input), every channel number available from your cable company
will appear in your television’s Channel Summary and they will all be marked as available for
scanning. Even though every channel is detected and appears as available, you will only be
able to view those that you specifically subscribe to from your cable company. This will likely
mean there are blank channels between those channels you wish to scan or “surf”.
We apologize for any inconvenience this may cause but it is important to note that this is
not a malfunction of your television. If you want to sequentially scan those channels you
subscribe to without blank ones in between, you can contact your cable company for their
cable box and remote.
Avoiding Ghost Images
Displaying fixed images for extended periods of time can leave a subtle but temporary ghost
image on your screen. To avoid this, mix your viewing pattern.
Examples include, but are not limited to the following:
For example...
• Stock-market report bars
• Shopping channel logos and pricing
displays
TV on
TV off
• Video game patterns or scoreboards
• Bright station logos
• Internet web sites or other computer-style
images
• DVD discs, video tapes, laser discs
• Broadcast, cable, satellite channels or
digital television tuners/converters
XYZ
XYZ
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings
Caring for the Cabinet
Normally, light dusting with a soft, non-scratching duster will keep your TV clean.
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly
moistened with water. You can add a few drops of mild liquid detergent to the water to help
remove spots of oily dirt.
• DO NOT allow liquid to enter the TV through the ventilation slots.
• DO NOT use strong or abrasive cleaners on the TV.
• DO NOT spray liquids or cleaners directly on the TV’s surface.
• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.
Caring for the Screen
The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.
Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.
These will remove the coating layer and cause discolorations.
Do not push or hit the screen. This could cause scratches on the screen surface and image
distortions.
Tidying the cables
A cable holder which keeps your connection cables tidy is attached to the back of the stand.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings
Disconnecting the stand
If you disconnect the stand, attach the bottom cover and the screw (supplied) into the hole.
1) Place the TV face down on a soft cloth on a table.
2) Remove the four screws from the back of the TV.
3) Pull out the stand from the TV.
4) Cover the hole with a bottom cover and tighten the screw.
Note:
• To re-install the stand, reverse the procedure from 4) to 1).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Sound Adjust . . . . . . . . . . . . . 55
Sound Settings . . . . . . . . . . . . . 55
Turn On Volume . . . . . . . . . . . . . 55
Volume Limit . . . . . . . . . . . . . . 55
Reset . . . . . . . . . . . . . . . . . . 55
Clock/Timers . . . . . . . . . . . . . . . . 56
Set Clock . . . . . . . . . . . . . . . . 56
On/Off Timer . . . . . . . . . . . . . . . 57
Important Safety Precautions . . 2
Warnings . . . . . . . . . . . . . . . 5
Quick Setup . . . . . . . . . . . . . . 9
Unpacking your TV . . . . . . . . . . . . 9
TV Models . . . . . . . . . . . . . . . . 10
TV Remote Control . . . . . . . . . . . 11
Getting Started . . . . . . . . . . . . . 12
The Remote Control . . . . . . . . . . 12
Connecting Your Devices . . . . . . . 13
Interactive Plug In Menu . . . . . . . . 24
Button Functions . . . . . . . . . . 58
Power . . . . . . . . . . . . . . . . . . 58
Number Buttons . . . . . . . . . . . . . 58
Tune . . . . . . . . . . . . . . . 58
Sub Channel . . . . . . . . . . . . . 58
Channel +/- . . . . . . . . . . . . . 58
Volume +/- . . . . . . . . . . . . . 59
Muting . . . . . . . . . . . . . . . . . . 59
D/A (Digital/Analog) . . . . . . . . . . . . 59
Input . . . . . . . . . . . . . . . . . . . 59
Return+/TV . . . . . . . . . . . . . . . 60
Light . . . . . . . . . . . . . . . . . . 60
Menu . . . . . . . . . . . . . . . . . . 60
OK . . . . . . . . . . . . . . . . . . . 60
Back . . . . . . . . . . . . . . . . . . . 60
Favorite . . . . . . . . . . . . . . . . 61
Aspect . . . . . . . . . . . . . . . . . 62
Guide . . . . . . . . . . . . . . . 63
Sound . . . . . . . . . . . . . . . . . . 64
ML/MTS . . . . . . . . . . . . . . . . . 64
Video Status . . . . . . . . . . . . . . . 65
C.C. . . . . . . . . . . . . . . . . . . . 65
Sleep Timer . . . . . . . . . . . . . . . 66
Display . . . . . . . . . . . . . . . . . 66
Twin . . . . . . . . . . . . . . . . . 67
Swap . . . . . . . . . . . . . . . . . 67
Select . . . . . . . . . . . . . . . . . 68
Freeze . . . . . . . . . . . . . . . . . 68
Mode . . . . . . . . . . . . . . . . . . 68
External device control buttons . . . . . 68
Onscreen Menus . . . . . . . . . 27
Using the Guide . . . . . . . . . . . . . 27
Onscreen Menu System . . . . . . . . . 28
Initial Setup . . . . . . . . . . . . . 30
HDMI Size . . . . . . . . . . . . . . . . . 30
Video-1 Audio . . . . . . . . . . . . . 30
Noise Muting . . . . . . . . . . . . . . 31
Front Panel Lock . . . . . . . . . . . . 31
Video Input Label . . . . . . . . . . . 32
Position Adjustment . . . . . . . . . . . . 33
Power Indicator . . . . . . . . . . . . . 33
Illumination . . . . . . . . . . . . . . . . 34
Language . . . . . . . . . . . . . . . . 34
Closed Caption . . . . . . . . . . . . . 34
Auto Shut Off . . . . . . . . . . . . . . 37
XDS ID . . . . . . . . . . . . . . . . . . 37
Auto Tuner Setup . . . . . . . . . . . . 37
Channel Summary . . . . . . . . . . . . 38
V-Chip . . . . . . . . . . . . . . . . . . 40
Set Lock Code . . . . . . . . . . . . . 46
Auto Demo . . . . . . . . . . . . . . . 47
Digital Setup . . . . . . . . . . . . . . . 47
V5 Input . . . . . . . . . . . . . . . . . 49
Picture Adjust . . . . . . . . . . . . . 50
Picture Settings . . . . . . . . . . . . . 50
Color Temperature . . . . . . . . . . . . 50
Color Management . . . . . . . . . . . . 51
Dynamic Gamma . . . . . . . . . . . . . 51
Smart Picture . . . . . . . . . . . . . . 51
Natural Cinema . . . . . . . . . . . . . . 52
Digital VNR . . . . . . . . . . . . . . . 52
MPEG NR . . . . . . . . . . . . . . . 53
Smart Sensor . . . . . . . . . . . . . . 53
Sensor Effect . . . . . . . . . . . . . . . 53
Theater Pro II . . . . . . . . . . . . . . . 53
Reset . . . . . . . . . . . . . . . . . . 54
Remote Programming . . . . . . 69
OSD Information . . . . . . . . . . 75
Weak Signal . . . . . . . . . . . . . 75
No Program . . . . . . . . . . . . . . 75
Invalid Signal . . . . . . . . . . . . . 75
Troubleshooting . . . . . . . . . . 76
Specifications . . . . . . . . . . 78
Warranty . . . . . . . . . . . . . 79
Authorized Service Center . . . 80
Notes . . . . . . . . . . . . . . . 81
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Unpacking your TV
Thank you for your purchase of a JVC LCD Flat Television. Before you begin setting up your
new television, please check to make sure you have all of the following items. In addition to
this guide, your television box should include:
AA Batteries x 2
Remote Control x 1
Television x 1
POWER
D/A
TV
STB VCR DVD AUDIO
INPUT
MODE
V1
V2
V3
V4
V5
1
2
5
8
0
3
6
9
4
7
RETURN
TV
+
TUNE
–
CH
+
–
VOL
+
LIGHT
MUTING
OK
Note: Your television
and/or remote
DVR
STATUS
VIDEO
SOUND
GUIDE
SUB CH
TV/VCR
C.C.
SUB T.
DISPLAY
control may differ
from the examples
illustrated here.
TWIN
SLEEP
ML/MTS
FREEZE
SWAP
SELECT
RTM-CV1400
Cover x 1
Screw x 1
We recommend that before you start using your new television, you read this entire User’s
Guide so you can learn about your new television’s many great features. If you’re anxious to
start using your television right away, a quick setup guide follows on the next few pages.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
TV Models
Before you connect your television to another device, please refer to the proper diagrams for
your specific TV and remote. These will help assist you in understanding how to connect your
television to another device, as well as use the remote to set up your television.
Rear Panel Diagram
5
INPUT
VI
D
EO
R
-
A
U
D
IO
-
L
P
C
I
N
(D-SUB)
5
I
VIDEO
R
-
AUDIO
-
L
Y
PR
PB
4
T
VIDEO
R
-
AUDIO
-
L
Y
Y
PR
PB
3
I
S-VIDEO
VIDEO
SERVICE
ONL
DIGITAL AUDIO
OPTICAL OUT
Y
R
R
-
AUDIO
-
L
L
RS-232C
INPUT
5
INPUT
2
INPUT
1
D
O
I
N
U
FORHDMI1
DIOUT
R
-
AUDIO
-
L
P
O
U
A
P
4
INPUT
VI
-
D
SERVICE
ONLY
DIGITAL AUDIO
OPTICAL OUT
EO
R
-
RS-232C
A
U
D
IO
INPUT
5
INPUT
2
INPUT
1
L
Y
P
P
3
INPUT
S-
VI
D
EO
VI
-
D
EO
R
R
-
A
U
D
IO
L
AU
D
IO
I
NP
U
T
L
FORHDMI1
DIOUT
R
-
A
U
D
IO
-
L
ADIOUT
D
Notes:
• The terminal labeled "SERVICE ONLY", is exclusively used to update the
software version.
• For governing the usage of the RS-232C terminal, consult your dealer.
Side Panel Diagram
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
TV Remote Control
POWER
D/A
TV
STB VCR DVD AUDIO
INPUT
MODE
V1
V2
V3
V4
V5
1
2
5
8
0
3
6
9
4
7
RETURN +
TV
TUNE
– CH +
– VOL +
LIGHT
MUTING
OK
DVR
STATUS
SOUND
VIDEO
GUIDE
SUB CH
TV/VCR
C.C.
SUB T.
DISPLAY
TWIN
SLEEP
ML/MTS
SWAP
SELECT
FREEZE
RTM-CV1400
RM-C1400
Notes:
• For information on remote control buttons, see pages 58 - 68.
• SUB CHANNEL and GUIDE buttons are for digital channels. If your TV is connected to an
ATSC antenna or Digital Cable, you can use these buttons.
• This remote control is capable of operating many external device brands. See page 69 - 74
for how to program the remote control.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away. If you have questions, or for more detailed
information on any of these steps, please consult other sections of this manual.
Step 1 – The Remote Control
Before you can operate your remote control, you first need
to install the batteries (included).
Raise the latch on the remote's back cover to remove.
Insert two batteries, carefully noting the "+" and "–"
markings. Place the "–" end in the unit first. Snap the
cover back into place.
When you change the batteries, try to complete the
task within three minutes. If you take longer than
three minutes, the remote control codes (ex. VCR,
DVD) may have to be reset. See pages 69 - 74.
POWER
Basic Operation
Turn the television on and off by pressing the POWER button at the top right corner
of the remote. If this is the first time you are turning on the TV, the interactive
plug in menu appears.
• At first, to watch your TV, select the TV mode by pressing the MODE button on
the remote control before you turn the TV power on.
• See page 58 to 68 for details regarding the remote control buttons.
Using Menu Buttons
To use the menu functions, press the MENU button. Next,
select a menu using the four arrow keys. The four arrow keys
are used only for menu selections.
OK
DVR
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Step 2 - Connecting your devices
To make these connections, you will use plugs like the ones illustrated below.
Component Cables
Coaxial Cables
Composite Cables
Audio Cables
Used to connect an external
antenna or cable TV system to your
TV.
Used to connect audio/video
devices like VCRs, DVD players,
stereo amplifiers, game consoles,
etc.
S-Video Cable
Used to make video connections
with S-Video VCRs, Camcorders
and DVD players.
Notes:
• The following connection diagrams are examples.
• After you are finished connecting your devices, plug the power cord into the nearest power
outlet and turn on the TV.
• If you follow these diagrams and the television does not work properly, contact your local
cable operator.
• To connect a DVD player, see VCR Connection.
• If you have a satellite television system, refer to the satellite TV manual.
No VCR Connection
TV Rear Panel
Cable or Antenna
Output
Coaxial Cable
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
VCR • DVD Connection
Notes:
• Green, blue and red are the most common colors for DVD cables. Some models may vary
colors. Please consult the user’s manual for your DVD player for more information.
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete
one set of connections (DVD or audio output) before starting the other to avoid accidentally
switching the cables.
• You may also connect the DVD player to Input 1.
Diagram #1
5
INPUT
V
-
ID
EO
R
-
A
U
D
IO
L
Y
PR
PB
4
INPUT
V
-
ID
E
O
R
-
AU
D
IO
L
Cable or Antenna
Output
Y
PR
PB
3
INPUT
Y
P
P
S
-VID
E
Green
Blue
O
V
-
IDEO
B
R
R
R
-
AU
D
IO
L
AUDIO OUT
Red
AUDIO INP
UT
L
OUT
R
L
FORHDMI1
DIOUT
Coaxial Cable
DVD Player
R
-
A
U
D
IO
-
L
ADIOUT
DIOUT
OR
IN
IN
TV Rear Panel
OUT
R
L
V
TV Rear Panel
OUT
VCR
Note:
• If this connection setup does not work for you, try the connection setup on page 15.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Diagram #2
5
INPUT
V
-
ID
EO
R
-
A
U
D
IO
L
Y
PR
PB
4
Cable or Antenna
Output
INPUT
V
-
ID
E
O
R
-
AU
D
IO
L
Y
IN
Two-Way Splitter
(Not supplied)
OUT OUT
PR
PB
3
Y
P
P
INPUT
S
Green
Blue
-VID
EO
V
-
IDEO
B
R
R
R
-
AU
D
IO
L
AUDIO OUT
Red
AUDIO INP
UT
L
OUT
R
L
FORHDMI1
DIOUT
DVD Player
R
-
A
U
D
IO
-
L
ADIOUT
DIOUT
OR
IN
IN
Coaxial Cable
TV Rear Panel
OUT
R
L
V
TV Rear Panel
OUT
VCR
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to a Camcorder
You can connect a camcorder to your television by using the input jacks located on the back
of the TV.
I
V
ID
EO
R
-
A
U
D
IO
-
L
TV Rear Panel
Y
PR
PB
4
IPNUT
VI
-
DEO
L
R
-
AU
D
IO
CAMCORDER
Y
PR
PB
IDEO
L
3
IPNUT
S
-V
IDE
O
V
-
R
-
AU
D
IO
1) Connect a yellow composite cable from the camcorder VIDEO OUT to the VIDEO IN on the
back of the TV.
2) Connect a white cable from the camcorder LEFT AUDIO OUT to the LEFT AUDIO IN on the
back of the TV.
3) Connect a red cable from the camcorder RIGHT AUDIO OUT to the RIGHT AUDIO IN on
the back of the TV.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to an External Amplifier
PR
PB
3
INPUT
S
-V
ID
E
O
V
IDEO
L
TV Rear Panel
R
-
AU
D
IO
-
AUD
IO
I
NP
UT
R
L
FORHDMI1
DIOUT
Speaker
Speaker
R
-
A
U
D
IO
-
L
Amplifier
ADIOUT
DIOUT
1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the
LEFT AUDIO INPUT on the amplifier.
2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the
RIGHT AUDIO INPUT on the amplifier.
Notes:
• Refer to your amplifier’s manual for more information.
• You can use AUDIO OUTPUT for your home theater system.
• If you have a device connected to INPUT-1, INPUT-2 or INPUT-5 (set "V5 INPUT" in the
INITIAL SETUP menu to "HDMI"). You will not be able to hear any audio from the AUDIO
OUT on the back of the TV.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to a Digital TV Receiver
By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in
their digital form.
FORHDMI1
DIOUT
TV Rear Panel
ADIOUT
DIOUT
TV Rear Panel
SERVICE
ONLY
DIGITAL AUDIO
OPTICAL OUT
RS-232C
INPUT
5
INPUT
2
INPUT
1
L
R
AUDIO OUT
DIGITAL OUT
DTV Decoder
HDMI to DVI Cable
After the connections have been made,
tighten the screw to secure the cables.
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder to
the HDMI INPUT-1 on the back of the TV.
2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT to the RIGHT AUDIO INPUT
HDMI AUDIO IN "R" on the back of the TV.
3) Connect a white cable from the DTV decoder LEFT AUDIO OUT to the LEFT AUDIO INPUT
HDMI AUDIO IN "L" on the back of the TV.
• Personal computer compatibility cannot be guaranteed.
• Use an HDMI to DVI cable (commercially available) in order to digitally connect the television
with a DTV decoder.
Notes:
• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance
may be slightly shifted. Access the “HDMI SIZE” in the INITIAL SETUP menu to adjust it.
(Refer to page 30.)
• When you do the above connection, set "VIDEO-1 AUDIO" in the INITIAL SETUP menu to
"ANALOG". See "VIDEO-1 AUDIO", page 30.
• The Analog Audio input can only be used with the HDMI INPUT-1.
• When setting the “VIDEO-1 AUDIO - ANALOG/DIGITAL” menu setting on the TV, please note
that this setting only effects the HDMI INPUT-1 jack and that if you use a DVI to HDMI adapter
this connection must be made to the HDMI INPUT-1 along with analog audio cables.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to an HDMI Compatible Device
By connecting an HDMI compatible device, high definition pictures can be displayed on your
TV in their digital form. Some HDMI devices can include DVD players, D-VHS or other HDMI
compatible device.
HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all
digital audio/video interface. HDMI provides an interface between any audio/video source,
such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a
digital television (DTV).
TV Rear Panel
SERVICE
ONLY
DIGITAL AUDIO
OPTICAL OUT
RS-232C
INPUT
5
INPUT
2
INPUT
1
HDMI Compatible Device
HDMI Cable
L
R
AUDIO OUT
DIGITAL OUT
1) Connect the HDMI Cable from the DIGITAL OUT on the back of your DTV or HDMI device to
the HDMI INPUT-1 on the back of the TV.
Notes:
• When you do the above connection, set "VIDEO-1 AUDIO" in the INITIAL SETUP menu to
"DIGITAL". See "VIDEO-1 AUDIO", page 30.
• Some decoders may not respond depending on the equipment that is connected to the HDMI.
• If the HDMI output device signal is changed (for example, 480i/60Hz is changed to
480p/60Hz), the screen may turn green and there may be some distortion for a short time
until the signal becomes stable.
• This TV can accept 480i, 480p, 720p, 1080i and 1080p signals via HDMI.
• This JVC television can accept a variety of HD signals, including 720/60p, 1080/60i and
1080/60p. It does not accept a 1080/24p signal. Please note that in some cases, a Blu-ray
or HD-DVD may only offer the choice of 1080/60i or 1080/24p. In this case, it is necessary
to choose the 1080/60i output. Please refer to your Blu-ray/HD-DVD manual for complete
details on choosing the correct output.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to an amplifier using your optical output
You can connect an amplifier that has an optical digital input terminal by using an optical digital
cable from the optical output. The signal that is output can be PCM or DOLBY DIGITAL.
SERVICE
ONLY
DIGITAL AUDIO
OPTICAL OUT
TV Rear Panel
RS-232C
INPUT 5
INPUT 2
INPUT 1
Amplifier
1) Connect the optical cable from underneath the television to the back of the amplifier.
Notes:
• This terminal can only output digital audio.
• In order to use the optical output connection, select PCM or DOLBY DIGITAL on Digital
Sound in the DIGITAL SETUP Menu. See page 48.
• Refer to your owners manual on using your amplifier.
• You cannot output sound from your Optical Output connection if the audio source is from
your HDMI device.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to an AV Receiver using your television's
V3 Smart Input
By connecting your AV Receiver to your television's V3 Smart Input, you can watch picture
sources from many different devices, without having to change or use the other input
connections on your TV. This allows you to free up the other input connections so you can
connect more devices to your television.
R
-
AU
D
IO
-
L
TV Rear Panel
Y
PR
PB
3
IPNUT
S
-VID
EO
V
-
IDEO
R
R
-
AU
D
IO
L
AV Receiver
AUDIO
INP
UT
L
FROHDMI1
DIOUT
MONITOR
OUT
P
R
P
B
R
-
A
U
D
IO
-
L
AIDOUT
DIOUT
Y
MONITOR OU
1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT to the S-Video INPUT-3
on the back of the TV.
2) Connect a Yellow Composite Cable from the AV Receiver's MONITOR OUT to the VIDEO
INPUT-3 on the back of the TV.
3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT to the Y
VIDEO INPUT-3 on the back of the TV.
4) Connect a Blue Component Cable from the AV Receiver's PB MONITOR OUT to the PB
VIDEO INPUT-3 on the back of the TV.
5) Connect a Red Component Cable from the AV Receiver's PR MONITOR OUT to the PR
VIDEO INPUT-3 on the back of the TV.
Notes:
• Please refer to your AV Receiver instruction manual for more information on connecting your
speakers and other devices like a DVD player.
• Use your AV Receiver's remote to switch to the different devices you have connected.
• Some AV Receivers may not respond when the V3 Smart Input function is turned on.
• If you have video connections for each input device connected to your AV Receiver, you
should not connect them using both S-Video and Composite connection at the same time
when you are using V3 Input as the V3 Smart Input. In this case we recommend using the
S-Video connection.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to the computer
This TV can be used as a computer screen. Use a commercially available D-SUB cable to
connect the TV's PC INPUT terminal to the computer's analog RGB output terminal. If you
want to listen to the sound from the computer, use a commercially available RCA cable to
connect the INPUT-5 audio input terminal to the computer's audio output terminal.
5
IPNUT
TV Rear Panel
Computer
4
IPNUT
3
IPNUT
Notes:
• When you do the above connection, set "V5 INPUT" in the INITIAL SETUP menu to "PC".
See page 49.
• Refer to your computer manual for a detailed explanation of the connections concerning your
computer.
• Use cable with ferrite cores and no longer than of 3 m to avoid electromagnetic disturbance.
• Make sure that the connectors are facing the correct way when connecting.
• After connecting, tighten the two screws to fix the connectors in place.
Looking at the images from a computer
After starting the computer, press the V5 button on the remote control. You can listen to the
sound when the sound from the computer is connected to the INPUT-5 AUDIO input terminal.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Table of signals for each type of computer
Resolution
Vertical
Frequency
(Hz)
Horizontal
Frequency
(kHz)
640 x 480
(VGA)
60.0
60.0
31.5
48.4
1024 x 768
(XGA)
• Only the above formats are supported.
• Even with the above formats at 60 Hz, some problems may be experienced depending on
the quality of the synchronous signal. (Depending on the quality, some pictures may not be
displayed correctly).
• Apple Macintosh* computers are not supported.
When a picture is not displayed
With some computers, some problems can be solved by changing the settings. Check the
computer's refresh rate and set it to 60Hz. Computers that cannot set the refresh rate to 60
Hz, cannot be used with this TV. Refer to the computer's instruction manual.
*Apple Macintosh is a registered trademark of Apple Inc.
Note:
• If you are inputting a PC signal that is invalid, "Invalid Signal" will appear on the TV screen.
It appears when the input is PC and it is a single screen.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Step 3 – The Interactive Plug In Menu
When you turn your television on for the first time the interactive plug in menu will appear. The
plug in menu helps you to get your TV ready to use by letting you set your preferences for:
• The language in which you want the onscreen menus to appear.
• Setting the TV’s clock to the correct time so your timer functions will work properly. You can
choose “AUTO” or “MANUAL” for setting the clock.
• The auto tuner setup of which channels you wish to receive.
We recommend you complete the interactive plug in items before you start using your
television.
Notes:
• The interactive plug in menu setting does not appear if your TV has been turned on before.
In this case use the onscreen menus to perform these settings. See pages 34, 56, 37.
• If you press the Menu button while setting up the interactive plug in menu, it will skip over it.
Language
After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically
switches to the LANGUAGE settings. You can choose to view your onscreen menus in three
languages: ENGLISH, FRANÇAIS (French) or ESPAÑOL (Spanish).
LANGUAGE/LANGUE/IDIOMA
è
To choose a language:
ENGLISH, FRANÇAIS or ESPAÑOL
†
To NEXT (To set clock)
ENGLISH
NEXT
MENU
SELECT
OPERATE
EXIT
(Continued...)
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Auto Clock Set
Before you use any of your TV’s timer functions, you must first set the clock. You may
precisely set your clock using the XDS time signal broadcast by most public analog
broadcasting stations. If you do not have this in your area, you will have to set the clock
manually. See manual clock set below. To set the clock using the XDS signal:
è
†
To choose AUTO
To TIME ZONE
SET CLOCK
è
To select your time zone: (Atlantic, Eastern,
Central, Mountain, Pacific, Alaska or Hawaii)
MODE
TIME
TIME ZONE
D.S.T.
AUTO
-- ----
:
ATLANTIC
ON
†
è
†
To move to D.S.T. (Daylight Savings Time)
To turn D.S.T. ON or OFF
To NEXT (To Auto Tuner Setup)
NEXT
MENU
SELECT
OPERATE
EXIT
Notes:
• D.S.T. can be used when it is set to ON in the SET CLOCK menu.
• Only when the MODE is set to AUTO, the Daylight Saving Time feature automatically adjusts
your TV’s clock for Daylight Saving.
• The real time and D.S.T. may not be set correctly depending on the broadcasting signal and
receiving conditions. In this case, set your clock manually and turn D.S.T. to OFF.
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
Manual Clock Set
To set your clock manually (without using the XDS signal), choose MANUAL. If you choose
AUTO, see auto clock set above.
è
†
To choose MANUAL
To TIME
SET CLOCK
è
†
è
†
To set the hour
To minute
To set the minute
To TIME ZONE
MODE
TIME
TIME ZONE
D.S.T.
MANUAL
-- ----
:
ATLANTIC
ON
è
To select your time zone: (Atlantic, Eastern,
Central, Mountain, Pacific, Alaska or Hawaii)
START CLOCK
OPERATE
†
To move to D.S.T. (Daylight Savings Time)
MENU
SELECT
EXIT
è
†
To turn D.S.T. ON or OFF
To START CLOCK
Note:
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
(Continued...)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Auto Tuner Setup
In auto tuner setup, the TV automatically scans through all available channels, memorizing the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.
AUTO TUNER SETUP
è
To choose CABLE or AIR (or SKIP when
you skip Auto Tuner Setup)
TUNER MODE
AIR
†
To START
After Analog Auto Tuner Setup is finished, Digital Auto
Tuner Setup starts.
START
MENU
SELECT
OPERATE
EXIT
NOW
PROGRAMMING !
Now Programming...
20
48
When the setup is finished, "THANK YOU ! SETUP IS NOW COMPLETE" is displayed. Your
quick setup is now complete. You can now begin watching your television, or you can continue
on in this guide for more information on programming your remote control, or using the
JVC onscreen menu system to customize your television viewing experience.
Notes:
• If you want to cancel the Auto Tuner Setup, press the MENU button.
• Noise Muting will not work during Auto Tuner Setup.
• If you choose SKIP, it finished without doing the Auto Tuner Setup.
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is
normal.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
Using the Guide
Certain symbols are used throughout this guide to help you learn about the features of your
new television. The ones you will see most frequently are:
π† Up and Down arrows mean:
• Move vertically in a main menu screen
• Move through a submenu screen
• Move to the next letter, number, or other choice in a submenu
è Left and right arrows mean:
• Select a highlighted menu item
• Select an item in a submenu
• Select numbers in certain menu options
The “press button” icon means you should press the button named on your remote
control. (Button names appear in SMALL CAPITAL LETTERS.)
The “helping arrow” icon points to the highlighted or selected item in a menu.
To bring up the onscreen menu, press the MENU button on the remote control. The item that
appears in green is the one currently selected. If you use the Menu button on the TV’s side
panel instead of the remote, an additional menu screen showing VIDEO STATUS and ASPECT
will appear between INITIAL SETUP and PICTURE ADJUST. The “INTERACTIVE PLUG IN
MENU” will appear the first time the TV is plugged in.
INITIAL SETUP
PREVIOUS
AUTO TUNER SETUP
CHANNEL SUMMARY
V-CHIP
SET LOCK CODE
AUTO DEMO
ON
(4/5)
NEXT PAGE
SELECT
MENU
OPERATE
EXIT
Note:
• Menus shown in this book are illustrations, not exact replications of the television’s onscreen
displays.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
The Onscreen Menu System
Your television comes with JVC’s onscreen menu system. The onscreen menus let you make
adjustments to your television’s operation simply and quickly. Examples of the onscreen
menus are shown on the next page. Detailed explanations on using each menu follow later in
this guide. For information about the interactive plug in Menu, see pages 24 - 26.
The Onscreen Menu System
To open the onscreen menu system, press the MENU button on the remote control. You
navigate within the onscreen menus by using the four directional arrow buttons on the remote
control.
The selected feature and option on a menu screen are highlighted in a different color.
Selected
Feature (Green)
Selected Option
(Blue)
ENG. FRAN. ESP.
LANGUAGE
CLOSED CAPTION
To move to a different feature use the π† arrows to move up or down the list. When you
press the up arrow at the top of the list or the down arrow at the bottom, the next menu screen
will appear. Use the arrows √ ® to select an option from the highlighted feature. Pressing
MENU on the remote control will close the onscreen menu system and return you to normal
television viewing.
Each menu and its features will be discussed in the following pages of this guide.
Notes:
• If you do not press any buttons for about a minute, the onscreen menu will automatically
shut off.
• Button names in this guide are shown in SMALL CAPITAL LETTERS.
• Menus may appear in different sizes onscreen depending on the aspect ratio selected.
• Some menu items may not appear in menu screens when certain aspect ratios or inputs
are selected.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
Press the MENU button
To CLOCK/TIMERS
PICTURE ADJUST
INITIAL SETUP
SOUND ADJUST
PREVIOUS
HDMI SIZE
VIDEO-1 AUDIO
PREVIOUS
DIGITAL VNR
MPEG NR
SMART SENSOR
SENSOR EFFECT
THEATER PRO II
RESET
STANDARD
PREVIOUS
MaxxBass
MaxxTreble
MaxxStereo
MaxxVolume
BALANCE
HIGH
AUTO
DIGITAL
AUTO
ON
OFF
OFF
05
05
05
OFF
00
NEXT PAGE
SELECT
(1/5)
NEXT PAGE
(3/3)
NEXT PAGE
SELECT
(1/2)
MENU
OPERATE
EXIT
MENU
MENU
SELECT
OPERATE
EXIT
OPERATE
EXIT
INITIAL SETUP 01
PICTURE ADJUST 03
SOUND ADJUST 01
SOUND ADJUST
PICTURE ADJUST
INITIAL SETUP
PREVIOUS
TURN ON VOLUME
VOLUME LIMIT
PREVIOUS
NOISE MUTING
FRONT PANEL LOCK
VIDEO INPUT LABEL
POSITION ADJUSTMENT
POWER INDICATOR
PREVIOUS
STANDARD
ON
OFF
10
40
COLOR TEMPERATURE
COLOR MANAGEMENT
DYNAMIC GAMMA
SMART PICTURE
NATURAL CINEMA
HIGH
OFF
OFF
ON
AUTO
OFF
RESET
NEXT PAGE
(2/5)
NEXT PAGE
SELECT
(2/2)
EXIT
NEXT PAGE
(2/3)
MENU
MENU
SELECT
OPERATE
EXIT
OPERATE
MENU
SELECT
OPERATE
EXIT
SOUND ADJUST 02
INITIAL SETUP 02
PICTURE ADJUST 02
INITIAL SETUP
/
PICTURE ADJUST
CLOCK TIMERS
PREVIOUS
SET CLOCK
PREVIOUS
ILLUMINATION
LANGUAGE
PREVIOUS
TINT
STANDARD
LOW
00
00
00
00
00
ENG. FRAN. ESP.
/
ON OFF TIMER
COLOR
PICTURE
BRIGHT
DETAIL
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
OFF
ON
ENERGY SAVER MODE
NEXT PAGE
NEXT PAGE
SELECT
(3/5)
NEXT PAGE
SELECT
(1/3)
EXIT
MENU
MENU
OPERATE
EXIT
OPERATE
EXIT
MENU
SELECT
OPERATE
INITIAL SETUP 03
CLOCK/TIMERS
PICTURE ADJUST 01
INITIAL SETUP
INITIAL SETUP
PREVIOUS
PREVIOUS
AUTO TUNER SETUP
CHANNEL SUMMARY
V-CHIP
DIGITAL SETUP
V5 INPUT
To INITIAL SETUP 01
HDMI
SET LOCK CODE
AUTO DEMO
ON
NEXT PAGE
(4/5)
EXIT
NEXT PAGE
SELECT
(5/5)
EXIT
MENU
MENU
SELECT
OPERATE
OPERATE
INITIAL SETUP 04
INITIAL SETUP 05
Notes:
• The HDMI SIZE menu can only be displayed when a 480p picture signal is input to the HDMI
terminal and the picture is being displayed on the screen.
• SMART PICTURE menu cannot be selected when the Video Status mode is DYNAMIC.
• DETAIL menu cannot be selected when the Video Status mode is THEATER.
• When the Menu button on the TV side panel is pressed, the FRONT PANEL CONTROL menu
between INITIAL SETUP 05 and PICTURE ADJUST 01 will appear.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
HDMI Size
The HDMI SIZE option can only be selected in the INITIAL SETUP menu when an HDMI 480p
picture signal is being input to the HDMI terminal. This option adjusts the position when an
HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of
HDMI 480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted,
the position can be adjusted by selecting AUTO, SIZE1 or SIZE2.
Press the MENU button
HDMI SIZE
AUTO
SIZE1
SIZE2
π†
è
π†
To HDMI SIZE
To enter
To select AUTO, SIZE1 or SIZE2
Press the MENU button to finish
Notes:
• The HDMI SIZE menu can only be selected when a HDMI or DVI 480p picture signal is input
to the HDMI terminal and the picture is being displayed on the screen.
• You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the
television will select "SIZE1" or "SIZE2" automatically.
Video-1 Audio
This feature is used if you have a DVI or HDMI compatible component connected to your TV.
Press the MENU button
INITIAL SETUP
PREVIOUS
HDMI SIZE
VIDEO-1 AUDIO
π†
è
To VIDEO-1 AUDIO
To select ANALOG, DIGITAL or AUTO
AUTO
DIGITAL
Press the Menu button when finished
Notes:
NEXT PAGE
SELECT
(1/5)
• If your DVI or HDMI component is capable of digital
audio and video, choose DIGITAL. If your DVI or HDMI
MENU
OPERATE
EXIT
component is capable of analog audio and digital video, choose ANALOG.
• Refer to your DVI or HDMI component’s instruction manual for more information.
• When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically,
depending on the audio input from the HDMI.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Noise Muting
This feature inserts a blank gray screen over channels which are not broadcasting or are too
weak to be received clearly.
Press the MENU button
INITIAL SETUP
PREVIOUS
NOISE MUTING
ON
OFF
π†
è
To NOISE MUTING
To turn ON or OFF
FRONT PANEL LOCK
VIDEO INPUT LABEL
POSITION ADJUSTMENT
POWER INDICATOR
Press the MENU button when finished
OFF
NEXT PAGE
(2/5)
MENU
Notes:
SELECT
OPERATE
EXIT
• Noise muting will not work during auto tuner setup or
when you operate channel summary.
• Noise muting will not work when the digital TV is displayed.
Front Panel Lock
This allows you to lock the keys on the side of the TV, so that a child may not accidentally
change your viewing preferences.
Press the MENU button
INITIAL SETUP
PREVIOUS
NOISE MUTING
FRONT PANEL LOCK
VIDEO INPUT LABEL
POSITION ADJUSTMENT
POWER INDICATOR
π†
è
To FRONT PANEL LOCK
To turn ON or OFF
ON
OFF
Press the MENU button when finished
OFF
(2/5)
You can turn off this feature in the following ways:
NEXT PAGE
– Use the remote control.
– Press the MENU button on the side of the TV for more
MENU
SELECT
OPERATE
EXIT
than 3 seconds. In this case, the OSD for FRONT PANEL LOCK will appear.
– Unplug the power cord, and plug it back in. Do this if your batteries die or you lose your
remote control.
Note:
• To turn ON/OFF the TV, press the POWER button for more than 3 seconds. This feature will
remain ON.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Video Input Label
This function is used to label video input connections for the onscreen displays.
Press the MENU button
VIDEO INPUT LABEL
π†
è
π†
è
To VIDEO INPUT LABEL
To enter
VCR
DVD
SAT
GAME
STB
VIDEO-1
VIDEO-2
VIDEO-3
VIDEO-4
VIDEO-5
To select the desired video input
To select the desired preset input label (see
chart below)
OK
PRESS TO FINISH
MENU
SELECT
OPERATE
EXIT
Press the OK button to save
Press the MENU button when finished
Preset
Labels
Select when...
VCR
DVD
PVR
You have a VCR connected to the video input
You have a DVD connected to the video input
You have a Personal Video recorder connected to the video input
You have a Digital VCR connected to the video input
You have a Set-top Box connected to the video input
You have a Satellite Receiver connected to the video input
You have an Amplifier connected to the video input
You have a Video Game connected to the video input
You have a Video Camera connected to the video input
You have a Video Disc player connected to the video input
DVHS
STB
SAT
AMP
GAME
CAM
DISC
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Position Adjustment
Position adjustment allows you to adjust the position of the picture on the screen vertically
when the aspect is set to panorama or cinema.
Press the MENU button
π†
è
To POSITION ADJUSTMENT
To enter
π†√® To adjust the position
Press the MENU button to finish
Notes:
OK
MENU
RESET
EXIT
OPERATE
• To reset the adjustment to the center, press the
OK button.
• When the arrow disappears, while you are adjusting the position, the position is at its
maximum limit.
• If you select REGULAR, SLIM, FULL or FULL NATIVE size with aspect or Multi Screen,
position adjustment option is not selected.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position vertically and horizontally when
the aspect is set Panorama Zoom or Cinema Zoom for 1080i and 720p signals, or when PC
mode is set.
• It is also possible to use Position Adjustment when you are in PC Mode
• When you are receiving a 1080p signal, Position Adjustment cannot be selected.
Power Indicator
Power indicator allows you to adjust the brightness of the power indicator.
Press the MENU button
INITIAL SETUP
PREVIOUS
NOISE MUTING
π† To POWER INDICATOR
ON
FRONT PANEL LOCK
VIDEO INPUT LABEL
POSITION ADJUSTMENT
POWER INDICATOR
OFF
è
To turn LOW, HIGH or OFF
Press the MENU button to finish
OFF
NEXT PAGE
(2/5)
Notes :
• When OFF is selected :
MENU
SELECT
OPERATE
EXIT
The LED disappears if you have a TV signal.
The LED is lit as “LOW” when there is no TV signal.
• When the On Timer turns ON, the LED is lit as "LOW" when you turn the power off.
• If you set a timer on the TV, the power indicator will light even if the TV is on stand by.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Illumination
The illumination feature allows you to adjust the brightness of the light on the front of the
television. When you turn the power on the televison, the front panel light remains on when
illumination is set to LOW or HIGH.
Press the Menu button
INITIAL SETUP
PREVIOUS
ILLUMINATION
LANGUAGE
π†
To ILLUMINATION
LOW
ENG. FRAN. ESP.
è
To choose HIGH, LOW or OFF
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
Press the MENU button when finished
OFF
ON
NEXT PAGE
SELECT
(3/5)
MENU
OPERATE
EXIT
Language
The language function is described on page 24 as the interactive plug in menu. If you need to
choose the language again, follow the steps below.
INITIAL SETUP
Press the Menu button
PREVIOUS
π†
To LANGUAGE
ILLUMINATION
LANGUAGE
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
LOW
ENG. FRAN. ESP.
è
To choose a language: ENG. (English),
FRAN. (French) or ESP. (Spanish)
OFF
ON
Press the MENU button when finished
NEXT PAGE
(3/5)
MENU
SELECT
OPERATE
EXIT
Closed Caption
Many broadcasts now include an onscreen display of dialog called closed captions. Some
broadcasts may also include displays of additional information in text form. Your television can
access and display this information using the closed caption feature. To activate the closed
caption feature, follow the steps below. There are three methods. When you are watching
analog channels, you can perform Analog Setting of closed caption. When you are watching
digital channels, you can perform Digital Auto Setting or Digital Manual Setting.
Analog Setting
Press the MENU button
CLOSED CAPTION
MODE
CAPTION
TEXT
π†
è
π†
è
π†
è
To CLOSED CAPTION
To enter
To MODE
TEXT
CC1
T1
To select CAPTION or TEXT in MODE
To CAPTION or TEXT
To select a caption (CC1 to CC4) or text
channel (T1 to T4)
OK
PRESS TO FINISH
MENU
SELECT
OPERATE
EXIT
Press the OK button to save
Press the MENU button when finished
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Digital Auto Setting
Press the MENU button
Digital Closed Caption
Preview
π†
To CLOSED CAPTION
To enter
To Type
Closed Caption Sample
è
π†
è
Type
Auto
Service
Appearance
1
To select Auto, Advanced or Basic
Auto: Shows closed caption a priority for
digital channels over analog channels. It is
set automatically.
Cancel
Set
Operate BACK Back
MENU Exit
Select
Advanced: Shows only the digital closed
caption.
Digital Closed Caption > Appearance
Preview
Basic: Shows only the analog closed
caption.
Closed Caption Sample
Appearance Mode
Auto
Font
π†
è
π†
è
è
π†
To Service
To select 1, 2, 3, 4, 5 or 6
To Appearance
Colors
Opacities
Cancel
Set
To enter
BACK Back
MENU Exit
Select
Operate
To select Auto ("Manual, see page 36)
To Set
Press the OK button to save
The font/type and color are set automatically.
To Set
π†
Press the OK button to save
Press the MENU button when finished
Note:
• If you want to cancel the settings, select cancel.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Digital Manual Setting
Press the MENU button
Digital Closed Caption
Preview
>
Appearance
π†
To CLOSED CAPTION
To enter
To Appearance
To select Manual for Appearance Mode
To Font
To enter
Closed Caption Sample
è
π†
è
π†
è
π†
è
Appearance Mode
Manual
Font
Colors
Opacities
Cancel
Set
BACK
MENU
Select
Operate
Back
Exit
To select Font Size or Font Style
To select the setting you like
Font Size: Auto, Standard, Large or Small
Digital Closed Caption
Preview
>
Appearance
Font Style: Auto, Serif Mono, Serif, SanSerif Mono,
SanSerif, Casual, Cursive or Small Capital
π†
Closed Caption Sample
Font Size
Standard
Auto
Appearance Mo
Font
To Set
Font Style
Press the OK button to save
Colors
Cancel
Set
Opacities
Cancel
π†
è
π†
è
To Colors
To enter
To select Text, Edge or Background
To select the setting you like
Set
BACK
MENU
Select
Operate
Back
Exit
Auto, White, Black, Red, Green, Blue, Yellow, Magenta or Cyan
π†
To Set
Digital Closed Caption
>
Appearance
Press the OK button to save
Preview
Closed Caption Sample
π†
è
π†
è
To Opacities
To enter
To select Text/Edge or Background
To select Auto, Transparent, Translucent, Solid
or Flashing
Text
Appearance Mo
White
White
Black
Edge
Font
Background
Cancel
Colors
Opacities
Set
Cancel
Set
BACK
MENU
Select
Operate
Back
Exit
π†
π†
π†
To Set
Press the OK button to save
All fonts used for digital closed
caption and digital menus are
licensed from Monotype Imaging
Inc.
To Set
Press the OK button to save
To Set
Press the OK button to save
Press the MENU button when finished
Notes:
• Closed caption subtitles are usually found on closed caption channel CC1. Some programs may
include additional text information which is usually found on text channel T1. The other channels
are available for future use.
• Closed captioning may not work correctly if the signal being received is weak or if you are playing
a video tape.
• Most broadcasts containing closed captioning will display a notice at the start of the program.
• To select the mode, press the C.C. button. See page 65.
• When ZOOM aspects like PANORAMA or CINEMA are selected, Digital Closed Captions may be
cut off or distorted.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Auto Shut Off
This function automatically shuts off your TV when there is no signal from the channel or no
operation while the TV is on for 10 minutes.
INITIAL SETUP
Press the MENU button
PREVIOUS
ILLUMINATION
LANGUAGE
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
LOW
ENG. FRAN. ESP.
π†
è
To AUTO SHUT OFF
To turn ON or OFF
OFF
ON
Press the MENU button when finished
• If the channel that you have on does not receive a
signal for more than one minute, the blinking text
“NOT RECEIVING A SIGNAL AUTO SHUT OFF
IN 9 MIN.” appears on the screen, and starts the
countdown. If no signal is being received within 10
minutes, the TV shuts itself off.
NEXT PAGE
(3/5)
MENU
SELECT
OPERATE
EXIT
XDS ID
XDS ID Display provides a channel’s call letters, the network’s name, and even a program
name. The XDS ID information is provided by the broadcaster.
INITIAL SETUP
Press the MENU button
PREVIOUS
ILLUMINATION
LANGUAGE
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
LOW
ENG. FRAN. ESP.
π†
è
To XDS ID
To turn ON or OFF
OFF
ON
Press the MENU button when finished
NEXT PAGE
(3/5)
MENU
SELECT
OPERATE
EXIT
Auto Tuner Setup
The auto tuner setup function is described on page 26 as the interactive plug in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the MENU button
AUTO TUNER SETUP
TUNER MODE
π†
è
è
†
To AUTO TUNER SETUP
To operate
AIR
To choose CABLE or AIR
To START
START
è
To start the setup
MENU
SELECT
OPERATE
EXIT
The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.
Press the Menu button when finished
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV.
Regarding analog channels, you can add or delete channels from the line-up or prevent any
unauthorized viewers from watching any or all 181 channels. Regarding digital channels, the
only channels that will appear are the ones that are broadcasting.
Press the MENU button
To CHANNEL SUMMARY
To operate
Analog Channels
CHANNEL SUMMARY
π†
CHNO. SCAN
ID
CHNO. SCAN
ID
HBO
L
è
01
02
03
04
05
06
The Channel summary screen will now be displayed with
the channels set to scan marked with an “√”. Regarding
analog channels, you can delete channels from the scan
by removing the “√”. If any channels were missed during
auto tuner setup and you wish to add them, you may by
placing an “√” next to the channel number.
MTV
07
08
09
10
A&E
E!
OK
MENU
SELECT
OPERATE
EXIT
Digital Channels
• Digital channels cannot be added to the channel
summary if the auto tuner setup did not find them.
Channel Summary Digital
CH No.
D01
Scan
Station Name
FOX
π†√® To the SCAN column
Press the OK button to include or delete from
scan
D02
ABC
D02
CNN
D10-1
D10-2
D12345
NBC
BOX
Press the MENU button when finished
NHK
OK Operate
BACK Back
MENU Exit
Select
Note:
• The number of a digital channel may change,
depending on the time of some broadcastings. If
this channel existed and now has disappeared,
the lock channel or scanned channel mark by
the channel summary for that channel will be
cancelled.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
How to set the channel label. (This is only for analog broadcasting.)
Press the MENU button
ID
π†
è
è
To CHANNEL SUMMARY
To operate
To the ID column
CHANNEL 09
RESET
Press the OK button to enter
OK
PRESS TO FINISH
è
π†
To select the character you want
To move to the next space
MENU
SELECT
OPERATE
EXIT
...continue to follow these directions for all four
spaces
Press the OK button to finish
Your characters are now set
Press the MENU button when finished
If you want to reset the characters you set:
Press the MENU button
π†
è
è
To CHANNEL SUMMARY
To operate
To the ID column
Press the OK button to enter
To select RESET
π†
Press the OK button to finish
Your characters are now reset
Notes:
• You can use characters for: Alphabet, numbers, marks and spaces.
• It is possible to set the maximum of 40 channel labels.
• If you try to set more than the 40 maximum, the message "MEMORY OVERFLOW" will
appear.
You can block access to a channel by activating the channel lock.
Press the MENU button
π†
To CHANNEL SUMMARY
To operate
è
π†√® To the Lock Column (
)
Press the ZERO button to lock or unlock that channel
Press the MENU button when finished
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Channel Guard Message
When a viewer attempts to watch a guarded channel, the following message appears:
To watch a channel that you have locked, enter the
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
Lock Code using the 10 key pad.
If the wrong code is entered, the message
“INVALID LOCK CODE!” will flash on the screen.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
The channel cannot be accessed until the correct code
is entered.
NO. - - - -
Notes:
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.
• See also “Set Lock Code”, page 46.
V-Chip
Your TV is equipped with V-Chip technology which enables you to block channels or content
that you feel to be inappropriate for children, based on US and Canada rating guidelines.
V-Chip has no effect on video signals from DVD discs or Camcorder connection.
Note: Some programs, and movies are broadcast without a ratings signal. Even if you set
up V-CHIP ratings limits, these programs will not be blocked. See page 41 for information on
how to block unrated programs.
Note (for Canadian viewers): The V-Chip function is based on specifications designed for
the United States and therefore may not work properly in Canada.
You can customize the V-Chip settings of your television to match your personal tastes. The
V-Chip menu below is the starting point for your V-Chip settings
You can use US V-Chip settings (for programming broadcast from the United States), Canadian
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use
any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting
each of the three V-Chip formats appear in the next six pages along with descriptions of the
rating categories.
To access the rating categories:
Press the MENU button
V-CHIP
V-CHIP
OFF
π†
è
To V-CHIP
To operate (Lock icon
SET US TV RATINGS
SET MOVIE RATINGS
SET CANADIAN RATINGS ENG
SET CANADIAN RATINGS FRE
UNRATED
will appear)
Press ZERO to access the V-Chip menu
VIEW
è
To turn V-Chip ON or OFF (V-Chip must be
turned ON for rating settings to operate)
π†
To move to SET US TV RATINGS,
SET MOVIE RATINGS, or
MENU
SELECT
OPERATE
EXIT
SET CANADIAN RATINGS (see following
pages for descriptions of each item)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Unrated Programs
Unrated programming refers to any programming which does not contain a rating signal.
Programming on television stations which do not broadcast rating signals will be placed in the
“Unrated Programming” category.
Examples of Unrated programs:
• Emergency Bulletins
• News
• Public Service Announcements
• Sports
• Locally Originated Programming
• Political Programs
• Religious Programs
• Weather
• Some Commercials
Note:
• TV programs or movies that do not have rating signals will be blocked if the unrated category
is set to BLOCK.
Directions to Block Unrated Programs
You can block programs that are not rated.
Press the MENU button
V-CHIP
V-CHIP
OFF
π†
To V-CHIP
SET US TV RATINGS
SET MOVIE RATINGS
SET CANADIAN RATINGS ENG
SET CANADIAN RATINGS FRE
UNRATED
è
To operate (The lock icon
appears)
Press ZERO to access V-Chip setup options
VIEW
π†
To UNRATED
è
To VIEW or BLOCK
MENU
SELECT
OPERATE
EXIT
Press MENU when done
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
US V-Chip Ratings
U.S. PARENTAL RATING SYSTEMS
Programs with the following ratings are appropriate for children.
❒ TV Y is Appropriate for All Children
Programs are created for very young viewers and should be suitable for all ages, including
children ages 2 - 6.
❒ TV Y7 is for Older Children
Most parents would find such programs suitable for children 7 and above. These programs
may contain some mild fantasy violence or comedic violence, which children should be able
to discern from reality.
Programs with the following ratings are designed for the entire audience.
❒ TV G stands for General Audience
Most parents would find these programs suitable for all age groups. They contain little or no
violence, no strong language, and little or no sexual dialog or situations.
❒ TV PG Parental Guidance Suggested
Programs may contain some, but not much, strong language, limited violence, and some
suggestive sexual dialog or situations. It is recommended that parents watch these
programs first, or with their children.
❒ TV 14 Parents Strongly Cautioned
Programs contain some material that may be unsuitable for children under the age of 14
including possible intense violence, sexual situations, strong coarse language, or intensely
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.
❒ TV MA Mature Audiences Only
These programs are specifically for adults and may be unsuitable for anyone under 17
years of age. TV MA programs may have extensive V, S, L, or D.
Viewing Guidelines
In addition to the ratings categories explained above, information on specific kinds of content
are also supplied with the V-Chip rating. These types of content may also be blocked. The
content types are:
• V/FV is for VIOLENCE/FANTASY VIOLENCE
• S stands for SEXUAL CONTENT
• L stands for strong LANGUAGE
• D stands for suggestive DIALOG
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Setting US V-Chip Ratings
Press the MENU button
V-CHIP
V-CHIP
OFF
π†
è
To V-CHIP
To operate (lock icon
SET US TV RATINGS
SET MOVIE RATINGS
SET CANADIAN RATINGS ENG
SET CANADIAN RATINGS FRE
UNRATED
appears)
Press ZERO to access the V-Chip menu
VIEW
è
π†
è
To turn V-Chip ON or OFF
To move to SET US TV RATINGS
To operate
MENU
SELECT
OPERATE
EXIT
Directions to set US V-Chip Ratings
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and
press the π† or √® to move the cursor to the correct location. Press OK to turn the locking
feature on or off. An item is locked if the
icon appears instead of a “—”.
For example: To block viewing of all TV 14 shows, move the cursor to the top row of that
column and add a lock icon. Once you’ve put a lock on the top row, everything in that column
is automatically locked.
SET US TV RATINGS
π†√® To the TV 14 Column
TV
TV
TV
TV
G
TV
TV
Y
Press the OK button to lock
MA 14
PG
Y7
Press the MENU button when finished
V/FV
S
L
D
Note:
• If you want to change the setup, move the cursor to
the top column and change the lock icon to “—” by
pressing OK again. You may then select individual
categories to block.
OK
MENU
EXIT
SELECT
OPERATE
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Movies Ratings
❒ NR – Not Rated
This is a film which has no rating. In many cases these films were imported from countries
which do not use the MPAA ratings system. Other NR films may be from amateur producers
who didn’t intend to have their film widely released.
NR (Not Rated) Programming may contain all types of programming including children’s
programming, foreign programs, or adult material.
❒ G – General Audience
In the opinion of the review board, these films contain nothing in the way of sexual content,
violence, or language that would be unsuitable for audiences of any age.
❒ PG – Parental Guidance
Parental Guidance means the movie may contain some contents such as mild violence,
some brief nudity, and strong language. The contents are not deemed intense.
❒ PG-13 – Parents Strongly Cautioned
Parents with children under 13 are cautioned that the content of movies with this rating may
include more explicit sexual, language, and violence content than movies rated PG.
❒ R – Restricted
These films contain material that is explicit in nature and is not recommended for
unsupervised children under the age of 17.
❒ NC-17 – No One Under 17
These movies contain content which most parents would feel is too adult for their children
to view. Content can consist of strong language, nudity, violence, and suggestive or explicit
subject matter.
❒ X – No One under 18
Inappropriate material for anyone under 18.
Directions to set Movie (MPAA) Ratings
Press the MENU button
π†
è
To V-CHIP
To operate (Lock icon
appears)
Press ZERO to access V-Chip setup options
π†
è
To SET MOVIE RATINGS
To enter movies menu
For example: To block viewing of programming rated
NC-17 shows, move the cursor to the NC-17 column and
add a lock icon. Once you've put a lock on the NC-17
column, X column is automatically locked.
SET MOVIE RATINGS
N
P
C17
R
G13
PG
G
X
π†√® To the NC-17 Column
Press the OK button to lock
NR
Press the MENU button to finish
OK
MENU
EXIT
SELECT
OPERATE
• If you want to change the setup, move the cursor to the
column and change the lock icon to “—” by pressing OK again.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Canadian V-Chip Ratings
❒ E – Exempt
Exempt programming includes: news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
❒ C – Programming Intended for Children
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or
unrealistic in nature.
❒ C8+ – Programming Intended for Children 8 and Over
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low
intensity and will show the consequences of the acts. There will be no offensive language,
nudity or sexual content.
❒ G – General Audience
Programming will contain little violence and will be sensitive to themes which could affect
younger children.
❒ PG – Parental Guidance
Programming intended for a general audience, but which may not be suitable for younger
children. Parents may consider some content not appropriate for children aged 8-13.
❒ 14+ – 14 Years and Older
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and
early teens. Programming may contain mature themes and scenes of intense violence.
❒ 18+ – Adult
Material intended for mature audiences only.
Directions to set Canadian V-Chip Ratings
Press the MENU button
π†
è
To V-CHIP
To operate (lock icon
appears)
Press ZERO to access V-Chip setup options
π†
è
To SET CANADIAN RATINGS ENG (for English)
To enter ratings menu
For example: To block viewing of programming rated 14+ shows, move the cursor to the 14+
column and add a lock icon. Once you've put a lock
on the 14+ column, 18+ column is automatically
SET CANADIAN RATINGS ENG
locked.
P
C
G
C
18+
14+
G
8
è
To the 14+ Column
Press the OK button to lock
Press the MENU button to finish
MENU
OK
EXIT
SELECT
OPERATE
Notes:
• If you want to change the setup, move the cursor
to the column and change the lock icon to “—” by pressing OK again.
• For instructions on “SET CANADIAN RATINGS FRE (in French)”, please see page 45 in the
French user’s guide.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Set Lock Code
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes
preset with a lock code of “0000”. You may change the code to any four-digit number you wish.
To change the lock code, follow the steps below.
Press the MENU button
SET LOCK CODE
LOCK CODE
π†
To SET LOCK CODE
To operate (lock icon
0000
è
appears)
Press ZERO to access the lock code
The first digit will be highlighted
OK
PRESS
TO FINISH
MENU
SELECT
OPERATE
EXIT
è
π†
To select the number
To move to the next digit
Continue to follow these directions for all four numbers
Press the OK button to finish (your lock code is now set)
Press the Menu button when finished
When a viewer attempts to watch a blocked channel, this message appears:
THIS PROGRAMMING EXCEEDS
YOUR RATING LIMITS.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. - - - -
The channel will remain blocked until the correct lock code is entered (see above for
information on setting your lock code).
Notes:
• After a power interruption you must reset the lock code.
• Write your lock code number down and keep it hidden from potential viewers.
• If you forget the lock code, a new code may be set using the steps listed above.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Auto Demo
Auto Demo allows you to start the High Speed response Demonstration automatically or not.
Press the MENU button
INITIAL SETUP
PREVIOUS
π†
To AUTO DEMO
AUTO TUNER SETUP
CHANNEL SUMMARY
V-CHIP
SET LOCK CODE
AUTO DEMO
è
To turn ON or OFF
Press the MENU button when finished
ON
(4/5)
Note:
NEXT PAGE
MENU
SELECT
OPERATE
EXIT
• This demo is set to ON by default until you turn it OFF
in the main menu system.
Digital Setup
Use this function when you are receiving a digital broadcast.
Press the MENU button
Digital Setup
Antenna Level
π†
To DIGITAL SETUP
To enter
Digital Sound
PCM
è
Software Version
The onscreen will appear
Notes:
Software Update
• Software Update will only appear when the USB
memory is inserted into the USB connector.
Operate BACK Back
MENU Exit
Select
• If you are watching an analog channel, you can still
access the digital setup menu at anytime, while you are doing this, the background screen
will turn blank. In this case, the tuner will switch to digital, since you are accessing the digital
setup menu.
Antenna Level
Confirms the present antenna level.
Antenna Level
Press the MENU button
75
π†
To DIGITAL SETUP
To enter
BACK
MENU
è
Back
Exit
π†
To Antenna Level
To enter
è
The onscreen will appear
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Digital Sound
You can select the optical digital sound output, either PCM or DOLBY DIGITAL when your TV
is connected to an amplifier that has DOLBY DIGITAL decoder. If you select DOLBY DIGITAL,
you can enjoy listening in 5.1ch sound when watching digital broadcasts.
Press the MENU button
π†
è
To DIGITAL SETUP
To enter
π†
To Digital Sound
è
To select PCM or DOLBY DIGITAL
Press the MENU button when finished
Notes:
• If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don't select
PCM, it cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 20.
Manufactured under license from Dolby Laboratories. "Dolby", and
the double-D symbol are trademarks of Dolby Laboratories.
Software Version
You can confirm the Software Version.
Press the MENU button
π†
è
To DIGITAL SETUP
To enter
π†
To Software Version
è
To enter
Press the OK button when you are finished confirming your software version
Press the MENU button when finished
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup Menus
Software Update
At first, connect the USB memory into the USB connector. This function will appear only when
the USB memory is inserted into the USB connector.
Press the MENU button
π†
è
π†
è
π†
To DIGITAL SETUP
To enter
To Software Update
To enter
Checks if it needs an update or not
Press the MENU button when finished
V5 INPUT
The Video-5 input allows you to choose the signal type you wish to receive that you have
connected to Video-5 Input.
Press the MENU button
V5 INPUT
HDMI
π†
è
π†
To V5 INPUT
To enter
To select HDMI, PC or Composite
PC
COMPOSITE
Press the Ok button to decide
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust Menus
Picture Settings
These settings allow you to change and adjust the way the picture appears on your television.
TINT
Tint allows you to adjust the levels of red and green in your TV picture.
COLOR
The color function lets you make all the colors in the TV picture appear either more vivid or
subtle.
PICTURE
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker
or brighter picture overall.
BRIGHT
You can adjust the overall brightness of the TV picture with the Bright control.
DETAIL
The Detail feature adjusts the level of fine detail displayed in the picture.
ENERGY SAVER MODE
The energy saver mode adjusts the level of brightness on the TV screen.
Adjust the Picture Settings
Press the MENU button
PICTURE ADJUST
π†
To TINT, COLOR, PICTURE, BRIGHT,
DETAIL or ENERGY SAVER MODE
To enter
PREVIOUS
TINT
COLOR
PICTURE
BRIGHT
DETAIL
STANDARD
00
00
00
00
00
è
+02
TINT
ENERGY SAVER MODE
NEXT PAGE
(1/3)
EXIT
è
π†
π†
To adjust the setting
To back to the picture main menu
To move to the next setting
MENU
SELECT
OPERATE
Press the MENU button when finished
Notes:
• DETAIL menu cannot be selected when the Video Status mode is THEATER.
• There are six video status settings: Dynamic, Standard, Theater, Game, Memory-1 and
Memory-2. Each video status setting has a separate memory for HD (1080i/1080p/720p)
and SD (480p/480i) video signal. Each video status can be chosen along with your favorite
picture settings (Tint, Color, Picture, Bright, Detail, etc.) See page 65 for details.
Color Temperature
You can decide how strong or dull the colors appear on the TV screen.
Press the MENU button
COLOR TEMPERATURE
LOW
π†
è
π†
To COLOR TEMPERATURE
To enter
To set LOW or HIGH
HIGH
Press the MENU button when finished
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust Menus
Color Management
This TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated
to produce natural hues.
Press the MENU button
COLOR MANAGEMENT
ON
OFF
π†
è
π†
To COLOR MANAGEMENT
To enter
To turn ON or OFF
Press the MENU button when finished
Dynamic Gamma
JVC's Dynamic Gamma Circuitry (DGC) makes it easier to see dark areas when a picture
has many dark areas, and makes it easier to see the bright areas when a picture has many
bright areas. DGC is turned on, DGC analyzes and adjusts the total level of picture brightness
balance, especially in dark areas where the level of grayscale is often lost, turning completely
to black DGC automatically enhances the detail in these dark areas providing a more dynamic
image with finer detail, so the optimum picture settings are automatically set for each picture.
Normally use with DGC on.
Press the MENU button
DYNAMIC GAMMA
ON
OFF
π†
è
π†
To DYNAMIC GAMMA
To enter
To turn ON or OFF
Press the MENU button when finished
Smart Picture
Smart Picture detects the APL (Average Picture Level) and adjusts the level of brightness on
the TV screen suitable for what you are watching.
Press the MENU button
SMART PICTURE
ON
OFF
π†
è
π†
To SMART PICTURE
To enter
To turn ON or OFF
Press the MENU button when finished
Note:
• When you have "DYNAMIC" selected in the "VIDEO STATUS", Smart Picture is not selected.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust Menus
Natural Cinema
Natural cinema corrects the problem of blurred edges which may occur when viewing a program
originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges
of these programs, choose NATURAL CINEMA and set it to AUTO. Natural Cinema helps correct
conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the
television rate of 30 frames-per-second.
NATURAL CINEMA
Press the MENU button
AUTO
π†
è
π†
To NATURAL CINEMA
To enter
To select the mode AUTO, ON or OFF
ON
OFF
Press the MENU button when finished
Notes:
• When you are receiving a 1080p signal, Natural Cinema cannot be selected.
• The natural cinema mode is automatically set to “AUTO” in the following cases:
- Turning on or off
- Changing the channel or input mode
• If you are in PC mode, Natural Cinema cannot be used.
• Natural Cinema is only applied for SD 480i and HD 1080i signals.
Digital VNR
This function can be selected to change the effect of Digital VNR (Video Noise Reduction).
Press the MENU button
DIGITAL VNR
AUTO
MIN
π†
è
π†
To DIGITAL VNR
To enter
To select the effect you like.
MAX
OFF
AUTO: adjusts the effect of VNR automatically.
MIN: adjusts the effect of VNR to minimum.
MAX: adjusts the effect of VNR to maximum.
OFF: turns the effect of VNR off.
Press the MENU button when finished
Notes:
• If it is in PC, Digital VNR will not be displayed.
• When you are receiving a 1080p signal, Digital VNR cannot be selected.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust Menus
MPEG NR
This function effects the block noise removal and mosquito NR (Noise Reduction)
simultaneously.
Press the MENU button
MPEG NR
ON
π†
è
π†
To MPEG NR
To enter
OFF
To turn ON or OFF
Press the MENU button when finished
Notes:
• When you are receiving digital channels, block noise removal will have no effect.
• When you are receiving a 1080p signal, MPEG NR cannot be selected.
Smart Sensor
This function automatically adjusts the brightness on your TV according to the amount of light
in the room.
Press the MENU button
SMART SENSOR
π†
è
π†
To SMART SENSOR
To enter
To turn ON or OFF
ON
OFF
Press the MENU button when finished
Sensor Effect
With Sensor Effect ON, a "leaf" icon will appear on your TV screen when Smart Sensor
brightness adjustment occurs. The leaf icon will appear a maximum of 6 leaves. With each
appearance indicates the level of ambient light is getting darker.
Press the MENU button
SENSOR EFFECT
LOW
HIGH
π†
è
To SENSOR EFFECT
To turn ON or OFF
Press the MENU button when finished
Note:
• The leaves of Sensor Effect cannot be displayed when Closed Caption is ON.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust Menus
Theater Pro II
It is possible to use Theater Pro II menu only when the Video Status mode is set to THEATER.
It adjusts the detailed picture settings.
Theater Pro II Menu
DSD Detail
H.SHARP
Settings
Shows the edge of the picture clearly
Emphasizes the edge of the picture horizontally
Emphasizes the edge of the picture vertically
Reduces picture noise
V.SHARP
DSD NOISE CONTROL
COLOR TEMPERATURE
(RED, BLUE, GREEN)
COLOR BALANCE
Adjusts the screen (red, blue or green) color
Adjust the blue color naturally
Select a corrected color
*COLOR MNGMT.
(RED, YELLOW, GREEN, CYAN) AXIS
*COLOR MNGMT.
(RED, YELLOW, GREEN, CYAN) TINT
*COLOR MNGMT.
Adjusts the tints of (red, yellow, green or cyan)
Adjusts the color of (red, yellow, green or cyan)
(RED, YELLOW, GREEN, CYAN) COLOR
*COLOR:BRIGHT AREA
*COLOR:DARK AREA
Adjusts the picture color of the bright areas
Adjusts the picture color of the dark areas
* These Theater Pro II menus cannot be selected when Color Management is OFF. See page 51.
Press the MENU button
π†
To THEATER PRO II
To enter
Select a Theater Pro II menu
To adjust the settings
è
π†
è
Press the MENU button when finished
Reset
Reset resets all picture adjustments except for Natural Cinema at once to the default settings.
Press the MENU button
π†
To RESET
PICTURE ADJUST
Press the OK button
PREVIOUS
DIGITAL VNR
MPEG NR
SMART SENSOR
SENSOR EFFECT
THEATER PRO II
RESET
STANDARD
AUTO
ON
OFF
OFF
The onscreen menu disappears for a moment,
and then the settings are reset to the default
setting for all the picture adjustments except
for NATURAL CINEMA.
Press the MENU button when finished
NEXT PAGE
(3/3)
MENU
SELECT
OPERATE
EXIT
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjust Menus
Sound Settings
These settings allow you to change and adjust the sound on your television. Four sound
settings (MaxxBass, MaxxTreble, MaxxStereo and MaxxVolume) are referred as "MaxxAudio".
See page 64.
MaxxBass – Compensates for low frequencies and widens the frequency band.
MaxxTreble – Compensates for high frequencies and widens the frequency band.
MaxxStereo – Expands the stereo sound naturally.
MaxxVolume – Maintains a uniform sound volume even if the sound becomes too loud all of
the sudden (during commercial breaks, etc.).
BALANCE – Adjust the level of sound between the TV’s left and right speakers with the
balance setting.
Adjust the Sound Settings
Press the MENU button
SOUND ADJUST
PREVIOUS
HIGH
π†
To MaxxBass, MaxxTreble, MaxxStereo,
MaxxVolume or BALANCE
To adjust the setting
MaxxBass
05
05
05
MaxxTreble
MaxxStereo
MaxxVolume
BALANCE
√ ®
π†
OFF
To move to the next setting
00
Press the MENU button when finished
NEXT PAGE
SELECT
(1/2)
MENU
OPERATE
EXIT
Note:
• You can reset all sound adjustments you set at once as the default setting when you select
reset.
Turn On Volume
Turn On Volume allows you to set the volume level when you turn the TV on.
Press the MENU button
π†
è
To TURN ON VOLUME
To set
CURRENT
00
01
02
03
48
49
50
Press the MENU button to finish
Volume Limit
Volume Limit allows you to set the maximum volume level.
Press the MENU button
π†
è
To VOLUME LIMIT
To set the maximum volume level
00
01
02
03
48
49
50
Press the MENU button to finish
Reset
Reset resets all Sound Adjustments at once to the default settings. TURN ON VOLUME resets
to CURRENT and VOLUME LIMIT resets to 50. See page 54 on how to use reset.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timers Menus
Set Clock
The set clock function is described on page 25 as the interactive plug in menu. You can choose
to set the clock automatically or manually. If you need to set the clock again, follow the steps
below.
Press the MENU button
π†
è
To SET CLOCK
To enter
When you set the clock automatically, choose AUTO by pressing the
√
or
®
arrows.
π†
è
To TIME ZONE
To select your time zone:
ATLANTIC
SET CLOCK
EASTERN
CENTRAL
MOUNTAIN
HAWAII
ALASKA
PACIFIC
MODE
TIME
TIME ZONE
D.S.T
AUTO
--: ----
π†
è
To D.S.T. (daylight savings time)
To turn D.S.T. ON or OFF
ATLANTIC
ON
Press OK to finish
OK
PRESS TO FINISH
Press the MENU button when finished
MENU
SELECT
OPERATE
EXIT
When you set the clock manually, choose MANUAL by
pressing the or arrows.
√
®
π†
è
π†
è
π†
è
To move to the hours
To set the hours
To move to minutes
To set the minutes
To TIME ZONE
To select your time zone:
SET CLOCK
ATLANTIC
CENTRAL
EASTERN
HAWAII
MOUNTAIN
ALASKA
PACIFIC
MODE
TIME
TIME ZONE
D.S.T
MANUAL
--: ----
π†
To D.S.T. (daylight savings time)
è
To turn D.S.T. ON or OFF
Press OK to start clock
ATLANTIC
ON
OK
THANK YOU !!
PRESS TO FINISH
MENU
SELECT
OPERATE
EXIT
Press the MENU button when finished
Notes:
• D.S.T. can be used when it is set to ON in the SET CLOCK menu.
• Only when the MODE is set to AUTO, the Daylight Saving Time feature automatically adjusts
your TV’s clock for Daylight Saving.
• The real time and D.S.T. may not be set correctly depending on the broadcasting signal and
receiving conditions. In this case, set your clock manually and turn D.S.T. to OFF.
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timers Menus
On/Off Timer
The on/off timer lets you program your television to turn itself on or off. You can use it as an
alarm to wake up, to help you remember important programs, or as a decoy when you’re not
home.
Press the MENU button
ON/OFF TIMER
π†
è
è
To ON/OFF TIMER
ON TIME
OFF TIME
CHANNEL
ON VOLUME
MODE
7:00 PM
10:00 PM
03
CURRENT
EVERYDAY
NO
To enter (begins with ON TIME)
To set the hour (AM/PM) you want the TV to
turn on
ON/OFF TIMER
OK
π†
è
π†
To move to minutes
To set the minutes
PRESS TO FINISH
MENU
SELECT
OPERATE
EXIT
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the
OFF TIME the same way as ON TIME
π†
è
π†
è
π†
è
To accept OFF TIME and move to CHANNEL
To select channel
To ON VOLUME
To set the volume level
To move to MODE
To select ONCE or EVERYDAY
π†
To ON/OFF TIMER
è
Choose YES to accept the timer setting, choose NO if you don’t wish to accept
Press the OK button to finish
Press the MENU button to exit the menu
Notes:
• The on/off timer cannot be set to locked or guarded channels in the channel summary menu.
• In order for the on/off timer to work, the clock must be set.
• After a power interruption, the timer settings must be reset.
• If your clock is not set, "PLEASE SET CLOCK FIRST !!" will appear on the screen. See Set
Clock (choose MANUAL) on page 56 to set the clock.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Power
Turns the TV on or off.
Press the POWER button
Number Buttons - 10Key Pad
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
1 (One)
2 (Two)
Tune
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the TUNE button. For example, to move to channel 12:
1 (One)
2 (Two)
Press the TUNE button
Sub Channel
The main channel sometimes has minor channels (Sub Channels). By using the SUB CH
button, you can select a sub channel easily.
At first, select TV or STB mode to use the Sub channel function. See page 68.
To watch sub channels
For example, to move to sub channel 123-45:
Press 1, 2 and 3 in order
Press the SUB CH button
Press 4 and 5 in order
Press the TUNE button
Note:
• If there are more than 2 major channels, select the digital channel by using the π† buttons
and then press the OK button.
Channel +/–
Use these buttons to move up or down all the available channels your TV is able to receive.
To move rapidly through the channels using JVC’s Hyperscan feature, press and hold CH+ or
CH–.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Volume +/–
Use these buttons to raise or lower the TV’s volume level. The maximum is the level you set in
Volume Limit. See page 55.
Muting
The MUTING button instantly turns the volume down completely when you press it. Press
MUTING and the volume level will instantly go to zero. To restore the volume to its previous
level, press MUTING again.
D/A (Digital/Analog)
The D/A button changes the analog and digital channel. Digital channels have a "D" in front of
the channel number.
Press the D/A button
By every press of the D/A button, you can switch between analog and digital
channels.
To watch digital channels
For example, to move to channel D23:
Press 2 (Two)
Press 3 (Three)
Press the TUNE button
Input
Selects the signal input source for the television: VIDEO-1, 2, 3, 4 or 5 for video devices like
VCRs, DVD players or camcorders.
Press the V1, V2, V3, V4 or V5 button
Notes:
• When you return to TV mode, press the RETURN +/TV button or direct 10 key pad or CHANNEL
+/– button.
• You can also access by pressing the INPUT button on the side of the TV instead of the remote
control.
• VIDEO-5 (V5) can be used for HDMI, PC and Composite Input. You can select the input in
V5 INPUT in INITIAL SETUP menu.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Return +/TV
The RETURN+/TV button has three functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels using the CH+ and CH– buttons.
TV - Returns to the TV mode.
Press the RETURN+/TV and hold for three seconds
RETURN CHANNEL
PROGRAMMED!
The channel currently active has been programmed as your return+ channel. Now scan
through the channels using the CHANNEL+/– buttons.
Press the RETURN+/TV
You will return to your programmed channel.
• To cancel your return+ channel, press and hold the RETURN+/TV button for three seconds.
The message “RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with the Channel+/– buttons. Pressing any number key will cancel
return+.
Light
All remote control buttons are illuminated, except for the Light button. Press the LIGHT button
to turn the illumination on for 5 seconds.
Menu
The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate
the onscreen menu system. When a menu is displayed, press the MENU button to exit.
• See individual topics like “Sound Adjust” for specific information on using menus.
OK
This button confirms your selection when you are in one of the onscreen menus.
Back
This button allows you to go back in the menu to change a selection or correct a mistake.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Favorite
The Favorite button allows you to select your favorite channels easily. First, you must register
the channels that you like. See how to register below.
Press the FAVORITE button
FAVORITE
The favorite channel list will appear.
PREVIOUS
π†
To select the channel you want to watch
101
102
D103
<
CBS
FOX
PBS2
>
Press the OK button
It will change to the channel you have selected.
D107
8
HBO
ABC
Register the favorite channel
Press the channel number you want to register
The channel program will change.
NEXT
Press the FAVORITE button for three seconds
The channel will be registered in the favorite channel list.
Notes:
• Both analog and digital channels can be registered. The digital channels have a "D" in front
of the channel number.
• The maximum number of channels you can register is 24.
• If you have registered the maximum number of channels, and try to register more channels,
the oldest channel you registered will be deleted.
• Sub channels cannot be registered.
• The newest channel you registered will appear at the top of the list.
Delete the favorite channel
Press the FAVORITE button
The favorite channel list will appear.
π†
è
To select the channel you want to delete
To enter
Press the FAVORITE button
The channel was deleted.
Note:
• Before pressing the FAVORITE button when you are finished, press the √® button again, and
you can return to the deleted channel.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Aspect
This feature will help you adjust the picture you are watching to give you the best possible
picture quality.
Aspect Ratios
PANORAMA - With this ratio a normal
4:3 aspect picture is stretched to fit the
dimensions of the 16:9 aspect screen.
REGULAR - The regular ratio is used
when you want to watch a 4:3 broadcast
or recorded program without modifying the
original picture to fit the dimensions of your
16:9 screen. The 4:3 picture will fill the
screen from top to bottom, while black bars
will appear to fill up the remaining space
along the picture’s sides. The 4:3 picture
will be centered within the boundaries of the
16:9 screen.
CINEMA - This ratio “zooms in” on the
center part of a 4:3 aspect picture, blowing
it up to fill the 16:9 screen.
SLIM - This aspect mode shrinks the
screen of 16:9 to 4:3. There are some
programming that is already stretched by
mistake at broadcasting companies, so
this mode corrects it. Black side bars will
appear.
FULL - This is the ratio to use when
watching 16:9 High-Definition broadcasts.
PANORAMA ZOOM - This ratio stretches
the High-Definition 16:9 aspect image to
eliminate the black side bars.
Aspect Ratios in PC Mode
REGULAR - This is the original aspect
mode.
CINEMA ZOOM - This ratio stretches
the High-Definition 16:9 aspect image to
eliminate the black surrounding bars.
FULL - This aspect mode stretches the
image to fit the dimensions of the 16:9
aspect screen.
FULL NATIVE - This ratio displays 100% of
the ratio. Normally, all aspects except for
Full Native display about 95%.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Aspect Ratios (Continued)
Press the ASPECT button
• By pressing the ASPECT button, you can change the size.
When you change the aspect ratios, it is different from their broadcast or recorded program.
PC (XGA, VGA)
HD (1080i)
ATSC (1080i)
SD (480i, 480p)
NTSC
HD (720p)
ATSC (480i, 480p, 720p)
ASPECT
PANORAMA ZOOM
CINEMA ZOOM
FULL
ASPECT
FULL
REGULAR
ASPECT
PANORAMA ZOOM
CINEMA ZOOM
FULL
ASPECT
PANORAMA
CINEMA
FULL
REGULAR
FULL NATIVE
SLIM
SLIM
Notes:
• You can also choose the size by pressing the π† buttons.
• When you change the aspect ratio or signal, reset the picture position to center.
• You can also access the FRONT PANEL CONTROL screen by using the MENU button
on the side of the TV instead of the remote control. It appears between INITIAL SETUP
and PICTURE ADJUST screen, and it has VIDEO STATUS and ASPECT menus. Choose
ASPECT by pressing Menu
+/- buttons.
†
on the side panel and choose a mode by using the CHANNEL
• SLIM can only be displayed when the signal is ATSC (480i, 480p, 720p, 1080i) or HD (720p,
1080i).
• If the television receives a 16:9 signal from your HDMI device, the aspect mode will turn to
FULL automatically. If the television receives a 4:3 signal from your HDMI device when you
are in FULL aspect mode, it will return to REGULAR aspect mode. If you change the aspect
mode after the television changed it to FULL automatically, the television will change to the
aspect mode you choose. It also turns to FULL automatically when the TV receives an HD
(1080i or 720p) signal.
• When you are receiving an HDMI 1080p signal in FULL NATIVE mode, you are unable to
change the aspect mode.
Guide
You can view the program information from the GUIDE.
Notes:
• The GUIDE function will work when you are receiving digital program only.
• The GUIDE will not show the correct time and date if you have not performed the set clock
function on your television. See page 56.
• When the program information is not being broadcasted, it will not show the correct
information.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Sound
By pressing the SOUND button, you can change the sound mode of the MaxxAudio function.
The sound mode has four settings (HIGH, MID, LOW and OFF).
Press the SOUND button
SOUND EFFECT
π†
To MaxxAudio
MaxxAudio
MID
è
To choose HIGH, MID, LOW or OFF
Press the MENU when finished
MENU
OPERATE
EXIT
MaxxAudio is a registered trademark of Waves Audio Ltd. in the
USA, Japan and other countries.
Note:
• To set MaxxAudio (MaxxBass, MaxxTreble, MaxxStereo and MaxxVolume) individually for
each sound mode, see page 55.
ML/MTS
MTS technology allows several audio signals to be broadcast in analog at once, giving you a
choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an
MTS broadcast may also include a second audio program (SAP).
At first, select TV mode to use the multi-language/MTS function.
Press the ML/MTS button
MTS
STEREO
SAP
ON AIR
ON AIR
By every press of the ML/MTS button, you change
the mode
MONO
Notes:
• When you are receiving a digital broadcast, if there are other languages, you can change the
language by pressing the ML/MTS button.
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
• MTS unavailable if your television’s Input source is in VIDEO-1, 2, 3, 4 or 5 mode, as
described on page 59.
• ML/MTS will not work when you are using the HDMI.
• You can also change the mode by pressing the π† buttons.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Video Status
The VIDEO STATUS button gives you a choice of TV picture display settings, including a
display of your own preferences. Every input (TV, V1 - V5) can use the Video Status Mode.
STANDARD - Resets the picture display to the factory
VIDEO STATUS
settings.
STANDARD
DYNAMIC - Gives a vivid picture with better contrast when
DYNAMIC
viewing in a brightly lit room.
THEATER
THEATER - Gives a rich, film-like look to video when viewing
in a dimly lit room.
GAME - Used for when you are playing video games
connected to your TV.
GAME
MEMORY-1
MEMORY-2
MEMORY-1, MEMORY-2 - Default setting is the same as STANDARD mode.
Press the VIDEO STATUS button
By every press of the VIDEO STATUS button, you change the mode.
Notes:
• You can also change the mode by pressing the π† buttons.
• Each mode is memorized for each input connected to the TV.
• You can also access the FRONT PANEL CONTROL screen by using the MENU button on
the side of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has VIDEO STATUS and ASPECT menus. Choose VIDEO
STATUS by pressing MENU
+/- buttons.
†
on the side panel and choose a mode by using the CHANNEL
• There are six video status settings: DYNAMIC, STANDARD, THEATER, GAME,
MEMORY-1 and MEMORY-2. Each video status setting has a separate memory for HD
(1080i/1080p/720p) and SD (480p/480i) video signal. Each video status can be chosen
along with your favorite picture settings (Tint, Color, Picture, Bright, Detail, etc.)
– When an HD signal is displayed: Your HD settings are recalled for the video status you
are using.
– When an SD signal is displayed: Your SD settings are recalled for the video status you
are using.
– The input you are using (Input-1, Input-2, etc.) does not affect the setting that is recalled,
just the signal type.
– This function considers PC input as an HD signal and TWIN screens as an SD signal.
C.C. (Closed Caption)
Use the C.C. (Closed Caption) button to select the mode of closed caption.
At first, select TV, STB or VCR mode to use the closed caption function. See page 68.
Press the C.C. button
CLOSED CAPTION
OFF
Notes:
SMART CAPTION
• SMART CAPTION will appear when you press the MUTING
ON
button only on channels where the broadcast contains
closed captioning.
• When you select ON, it will be the mode selected in the Closed Caption Menu.
• See page 34 when you set the caption/text mode.
• You can also change the mode by pressing the π† buttons.
• If you are in PC mode, C.C. cannot be used.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Sleep Timer
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work for a total
time of up to 180 minutes.
At first, select TV mode to use the sleep timer function.
Press the SLEEP button
0
15 30 45 60 90 120 180
Sleep Timer Message
60 seconds before the automatic shutoff, this message will appear:
GOOD NIGHT !
PUSH SLEEP TIMER BUTTON
TO EXTEND
You then have 60 seconds to press the SLEEP button to
delay the shut off.
Display
The display screen shows the current status of timers, inputs and XDS ID.
At first, select TV or STB mode to use the display function. See page 68.
Press the DISPLAY button
The screen to the right shows the following
information:
05 KLVX PBS
JAZZ FESTIVAL
• The current channel or AV input (Channel 05)
• The current time (12:20 pm)
NOW
12:20 PM
OFF
SLEEP TIMER
• Sleep timer status/minutes remaining (The Sleep
Timer is off)
ON/OFF TIMER
EVERYDAY
7:00 PM
ON TIME
• On/off timer status (Set to turn on everyday at
7:00 PM, off at 10:00 PM)
OFF TIME
10:00 PM
• Each Press of the DISPLAY button changes the
display mode:
Display
Time
Channel
Off
Display - Full screen shown above
Time - Shows the current time only
Channel - Shows the current channel
Off - Turns display off
Notes:
• You may also turn off the display at any step by pressing MENU.
• If the clock, sleep timer or on/off timer are not set, the display screen will show:
“CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Twin
Activate the split-screen option by pressing TWIN on
the remote control. The channel (or input) you were
watching before pressing TWIN will appear on the left,
the new channel will appear on the right. The sound
will continue to come from the main screen channel
(or input). To turn split-screen off and return to
normal television viewing, press TWIN again or press
the BACK button.
07
V-1
MAIN SCREEN
PICTURE
SPLIT SCREEN
PICTURE
At first, select TV mode to use the TWIN function.
Notes:
• Main Screen and Split Screen will not display the same channel or input at the same time.
• You can enter the TWIN mode when the screen is in NORMAL mode.
• Split screen picture will not display digital channels and HDMI.
• Split-screen functions will not work with locked channels or channels blocked by V-Chip
ratings limits. A gray screen will display instead.
• Split screen picture will not display the picture from the component terminal and the HDMI
terminal.
• The aspect of Main Screen Picture becomes 16:9 when you input the picture of 480p,
720p and 1080i from the component terminal and HDMI terminal.
• After you press the SELECT button, and select split screen picture when you press the
OK button, select normal screen. If you don’t operate, the Main Screen Picture will be
automatically selected about 8 seconds later.
• When you are in TWIN or FREEZE mode, you cannot change the aspect ratio.
• When you press the Menu button in Twin mode, it appears only as Picture Adjust menu.
• When you are in PC mode or 1080p mode, TWIN, SWAP, SELECT and FREEZE cannot
be used.
Swap
You can exchange the channel (or input) displayed in the split screen window for the main
screen image by pressing the SWAP button.
At first, select TV mode to use the SWAP function.
Notes:
• It will only work in TWIN mode.
• If the signal that you are watching is coming from the HDMI input, you cannot enter the
SWAP mode.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Function
Select
With SELECT, you can select the picture (channel) while viewing TWIN screen. When you
press SELECT button, the channel number on the top will be highlighted. Each press of SELECT
will shift the channel.
At first, select TV mode to use the Select function.
Freeze
Pressing the FREEZE button causes the screen to change to the split-screen display with the still
picture displayed on the right. In order to return to the normal display, press the FREEZE button
once again.
At first, select TV mode to use the Freeze function.
Mode
Your remote control can be used to operate some basic functions of your external devices. To
use your device, select the proper mode.
MODE
TV
Device
TV
STB
STB/DVR (Cable Satellite)
VCR/DVR
VCR
DVD
AUDIO
DVD Player (DVD Recorder)
Amplifier/Home Theater in Box
Press the MODE button
By every press of the Mode button, you can select the mode.
TV
STB
VCR
DVD
AUDIO
• The mode LED indicator on the remote control lights for 3 seconds each time the remote
control is operated.
External device control buttons
You can use this remote control to operate the basic functions of your external devices. See
page 69 on how to program the remote control to operate your other devices.
Note:
• The remote is preset to control JVC-brand devices.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
Remote programming
You can program your remote control to operate your external devices, using the instructions
and codes on pages 70 - 74. The following external devices can be operated using your
remote control.
Device
Mode
Applied for these functions
Page
Cable Set Top Box
STB
Power on/off, Channel up/down, Volume up/down, Number 0 - 9, Tune, Return+/ TV,
Muting, Favorite Channel, Menu on/off, Arrow buttons, OK/Enter, Back, DVR (JVC Only)*,
Guide (EPG), Sub Channel, Closed Caption, Display (Recall),
70
Cable/PVR Combination
Satellite Set Top Box
DBS/PVR Combination
Rewind ( ), Playback ( ), Forward ( ), Record ( ), Stop ( ), Pause ( ).
VCR, DBS/PVR Combination
PVR, DVD/PVR Combination
VCR
DVD
Power on/off, Channel up/down, Menu on/off, Arrow buttons, OK/Enter, Back, Guide (EPG), 71, 72
TV/VCR, Closed Caption, Eject ( ), Rewind ( ), Playback ( ), Forward ( ), Record ( ),
Stop ( ), Pause ( ).
DVD Player, DVD Recorder
Home Theater in Box
Power on/off, Channel up/down, Menu on/off, Arrow buttons, OK/Enter, Back, Guide (EPG),
TV/DVD (TV/VCR button), Sub Title (Sub T.), Open/Close ( ), Rewind ( ), Playback ( ),
Forward ( ), Record ( ), Stop ( ), Still ( ).
73
Amplifier, Home Theater in Box, AUDIO
Receiver
Power on/off, Volume up/down, Muting, DVD operation buttons: Menu on/off, Arrow buttons,
OK/Enter, Back, Sub Title (Sub T.), Open/Close ( ), Rewind ( ), Playback ( ),
Forward ( ), Stop ( ), Still ( ).
74
* DVR button only applies to JVC DVR (Dish Satellite STB).
Notes:
• To record to your VCR or DVD, hold the record ( l ) button on the remote control and press play
( ® ).
• If the code you programmed doesn't work, try the next one. If no codes work, refer to "Search
Code Function" on page 69. If your remote does not work after using the "Search Code Function",
use the remote that came with your device. Your TV remote cannot be guaranteed to work with all
models, brands or operations.
• When the television remote control does not operate, for a model that allows you to switch the
remote control code on the device side, you can try switching the setting to default or something
else on the device side.
How to set the codes
1) Find your device and device's brand from the code list. See page 70 - 74.
2) Select the mode of your device by pressing the MODE button. Then confirm the mode LED on the
remote control.
3) Press and hold the TUNE button, then enter the first four digit code number listed using the
number buttons. When the code is set, the mode LED goes out for a second, then it lights.
4) After confirming the proper mode LED, release the TUNE button, and confirm the operation of your
device.
5) If your device does not respond, try and enter the next code.
Search Code Function
1) Select a mode of your device by pressing the MODE button.
2) Press the POWER and RETURN+/TV buttons. Hold for at least 3 seconds and release. Then confirm
the mode LED blinks.
3) Press any button* on the remote, and see if the selected device responds. *Use the applied
buttons except for √ ® cursors, Return+/TV and Rec ( l ) on the above chart.
4) If there was a response, press RETURN+/TV. The codes are now set. Then confirm the mode
LED goes out.
5) If there was no response, try to select the previous code or the next code by using √ or ® . If you
repeat a total of 65 times for the STB (90 times for the VCR, 120 times for the DVD and 132 times
for the AUDIO) without a response, use the remote control that came with your equipment. Press
RETURN+/TV to exit. Then confirm the mode LED goes out.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
Programming Codes
STB mode
Cable Set Top Box
0003, 0008
Satellite Set Top Box
Satellite Set Top Box
ABC
AlphaStar
Chaparral
Coolsat
Crossdigital
DirecTV
0772
0216
1806
1109
Samsung
1377, 1276, 1108,
Americast
Bell South
Digeo
Director
General Instrument
0899
0899
1187
0476
0476, 0810, 0276,
0003
0144
0009, 0273
0476, 0810, 0276,
0003
1109, 1442, 1609
0856
0639, 1639, 1640
0869
1142, 1442
0749, 1749, 0790,
1285
1392, 1640
1806
0724, 0722
1535
1535
0869
0856, 1856
SKY
Sony
1377, 0392, 0566, Star Choice
0639, 1639, 1142, Tivo
0247, 0749, 1749, Toshiba
0724, 0819, 1856,
1076, 1108, 0099, UltimateTV
1109, 1414, 1442, Ultrasat
GoldStar
Hamlin
Jerrold
1609, 1392, 1640
1505, 1005, 0775, US Digital
1170, 1775 USDTV
1505, 1005, 0775, Voom
Uniden
Memorex
Motorola
0000
Dish Network System
Dishpro
1376, 0476, 0810,
0276, 1187
1877, 0237, 0008
0000, 0008, 0107
0000
1305, 0317, 0025
1877, 0877, 0144, GE
0533
0000
0000
0279, 0273
0000
0000, 0144
1877, 0877, 0477,
0008
1006
0003
0276
0003
Pace
1775
Zenith
Panasonic
Paragon
Philips
Echostar
1505, 1005, 0775,
1170, 1775
0775, 1775
0566
DBS/PVR Combination
Expressvu
Pioneer
DirecTV
1377, 0392, 0639,
1142, 1076, 0099,
1392, 1442, 1640
1505, 0775
General Instrument
0869
Pulsar
Quasar
Regal
Runco
Samsung
Scientific Atlanta
GOI
0775, 1775
1535
0819
Hisense
Hitachi
HTS
Dish Network System
Dishpro
1505, 0775
0775, 1775
Echostar
1505, 0775, 1170
0775
Hughes Network Systems 1142, 0749, 1749, Expressvu
1442
Hughes Network Systems 1142, 1442
Humax
iLo
1790
1535
JVC
1170
Sony
Motorola
Philips
0869
1142, 0099, 1442
0392
Starcom
Supercable
Torx
Toshiba
Zenith
JVC
LG
0775, 1170, 1775
1414
Proscan
RCA
Magnavox
Memorex
Mitsubishi
Motorola
Next Level
Panasonic
Pansat
Paysat
Philips
0724, 0722
0724
0749
0869
0869
0247, 0701
1807
0724
1142, 0749, 1749,
0724, 1076, 0722,
0099, 1442
0392, 0566
1535
1392
0000
0000, 0525, 0899
Samsung
Sony
Star Choice
1442
0639, 1640
0869
Cable/PVR Combination
Americast
Digeo
General Instrument
Jerrold
Motorola
Pace
Pioneer
Scientific Atlanta
Sony
Supercable
Zenith
0899
1187
0810
0810
1376, 0810, 1187
1877, 0237
1877, 0877
1877, 0877
1006
Proscan
Proton
RadioShack
RCA
0869
0566, 0855, 0143,
1392
0276
0899
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
VCR mode
VCR
VCR
VCR
ABS
1972
0048, 0209
0000
Fisher
Fuji
Funai
Garrard
0047, 0104, 0046
0035, 0033
0000, 0593, 1593
0000
Marta
Matsushita
0037
0035, 0162, 0227,
1162
1972
0035
Admiral
Adventura
Aiko
0278
Media Center PC
MEI
Aiwa
0037, 0000, 0307, Gateway
1972
0479
0041, 0061, 0106
1972
0278
0035
0240
0037, 0278
0240
GE
0060, 0035, 0240, Memorex
0202, 0760, 0761,
0807, 1035, 1060
0432, 0526
0037, 0209, 0038,
0225, 1237
0035, 0162, 0037,
0048, 0039, 0047,
0240, 0000, 0104,
0209, 0046, 0307,
0479, 1037, 1048,
1162, 1237, 1262
0240, 0043, 0061
0240
Akai
Alienware
America Action
American High
Asha
Go Video
GoldStar
Audiovox
Gradiente
Harley Davidson
Harman/Kardon
0000
MGA
Beaumark
Bell & Howell
Broksonic
0000
0081, 0038
0072
MGN Technology
Microsoft
Mind
0104
1972
1972
0184, 0121, 0209, Harwood
0002, 0479, 1479
0037
0035
0020
0081
0072, 0278
0037, 0278, 1278
0072
0037, 0047, 0240, Hughes Network Systems 0042, 0739
0072, 0271
Headquarter
Hewlett Packard
HI-Q
0046
1972
0047
0037, 0240, 0000,
Minolta
Mitsubishi
0042, 0105
Calix
0081, 0067, 0043,
0041, 0061, 0173,
0807
0035, 0048
0240, 0000
Canon
Capehart
Carver
CCE
Citizen
Colt
Hitachi
0042, 0041, 0105, Motorola
1037
1972
1972
MTC
Multitech
NEC
Howard Computers
HP
0000, 0072
0035, 0037, 0048,
0104, 0067, 0041,
0038, 0008
0037
1972
0240
1972
0035
1062, 0162, 0037,
0048, 0104, 0432,
0593, 1048, 1162,
1262
0184, 0121, 0209,
0002, 0208, 0479,
1479
1062, 0035, 0162,
0225, 0227, 0616,
1035, 1162, 1262
0035, 0037, 0240,
0042, 0038, 1035,
1237
Craig
Humax
0739
1972
1972
0041
Curtis Mathes
0060, 0035, 0162, Hush
0041, 0760, 1035
0240
Nikko
Niveus Media
Noblex
iBUYPOWER
Jensen
JVC
Cybernex
CyberPower
Daewoo
1972
0045, 0067, 0041, Northgate
0008, 0366, 1707, Olympus
1945, 1774, 1775, Optimus
1776, 1777
0037, 0278
0067, 0041, 0038
0045, 0104, 0278,
0020, 0046, 0561,
1278
0020
1972
0042
0739
0039, 0038
0000
0037
Daytron
Dell
Denon
DirecTV
Durabrand
Dynatech
Electrohome
Electrophonic
Emerex
KEC
Kenwood
KLH
Kodak
LG
0072
Orion
0035, 0037
0037, 0045, 0042,
0209, 0038, 1037
1972
0000, 0208
0240, 0072
0037
Panasonic
Penney
Linksys
Lloyd's
Logik
0037
0032
Emerson
0035, 0037, 0184, LXI
0240, 0045, 0000, Magnasonic
0121, 0043, 0209, Magnavox
0002, 0278, 1593,
1479, 1278, 0593,
0561, 0479, 0208, Magnin
0593, 1278
0035, 0039, 0081, Pentax
0000, 0149, 0563, Philco
0593, 1593, 1781
0240
0042, 0105
0035, 0000, 0038
0061
Marantz
0035, 0081
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
VCR mode
PVR
VCR
VCR
Philips
0035, 0081, 0000, Symphonic
0563, 0593, 0618, Systemax
0739, 1081, 1181, Tagar Systems
0000, 0593, 1593
1972
1972
Howard Computers
HP
Hughes Network Systems 0739
1972
1972
1266
0037
Tatung
0081, 0045, 0000, Humax
0067, 0041, 0008, Hush
0739
1972
Pilot
Pioneer
Polk Audio
Portland
Presidian
Profitronic
Proscan
0081, 0042, 0067
0081
0020
1593
0240
0060, 0202, 0760, Tivo
0761, 1060
0072
0039
0046
0046
0035, 0162, 1035,
1162
0000, 1037
0037
0037
0366
iBUYPOWER
JVC
Linksys
Media Center PC
Microsoft
1972
1945
1972
1972
1972
1972
1972
1972
0616, 1777
0618, 0739
0880
0614, 0616
0739
0614, 0616
0636, 1972
1972
1972
1972
0618, 0636, 0739
1008, 1972, 1996
1972
Teac
0000, 0041
0035, 0162
0035, 0037, 0000
0000
0618, 0636, 0739, Mind
1996
Technics
Teknika
Thomas
Niveus Media
Northgate
Protec
Pulsar
Quarter
Quartz
Quasar
TMK
Toshiba
0240, 0208
0081, 0045, 0042, Panasonic
0067, 0043, 0041, Philips
0008, 0057, 0366, RCA
0845, 1008, 1145, ReplayTV
1972, 1996
0037, 0240
1972
0240
0045
0038
0045, 0061
0037
Samsung
Sonic Blue
Sony
RadioShack
Radix
Randex
RCA
Totevision
Touch
Unitech
Stack 9
0060, 0035, 0240, Vector
Systemax
Tagar Systems
Tivo
Toshiba
Touch
0000, 0042, 0149, Vector Research
0105, 0106, 0202, Video Concepts
0760, 0761, 0807, Videomagic
0880, 1035, 1060
Videosonic
0240
Realistic
0035, 0037, 0048, Viewsonic
0047, 0000, 0104, Villain
1972
0000
Viewsonic
Voodoo
1972
1972
0046
0614, 0616
1972
Voodoo
Wards
1972
ZT Group
1972
ReplayTV
Ricavision
Runco
0060, 0035, 0048,
0047, 0081, 0240,
0000, 0042, 0072,
0149, 0760
0209, 0072
0035, 0000, 0072
0041, 0038
0039, 0033, 0000,
0209, 0034, 0479,
1139, 1479
1972
DVD/PVR Combination
0000
0039
Samsung
0240, 0045, 0432,
0739, 0760, 1014
0048, 0039
0000, 0067, 0209, Yamaha
0041, 0271, 0479, Zenith
1479
Emerson
White Westinghouse
XR-1000
Sanky
Sansui
Sanyo
Scott
0047, 0240, 0104,
0046
ZT Group
0184, 0045, 0121,
0043
DBS/PVR Combination
1945
Sears
0035, 0037, 0047,
0000, 0042, 0104, Echostar
0046, 0057, 0105, Hughes Network Systems 0739
1237
JVC
1945
0739
0739
Sharp
0048, 0209, 0807, Philips
0848, 1048
0104, 0072
0240
0045, 0072
0614, 0616
0035, 0032, 0033, Alienware
0000, 0034, 0636, CyberPower
0639, 0640, 1032, Dell
1232, 1972
1972
Samsung
Shintom
Shogun
Singer
Sonic Blue
Sony
PVR
ABS
1972
1972
1972
1972
0739
1945
1945
1972
1972
DirecTV
Dish Network System
Echostar
Stack 9
STS
Sylvania
0042
0035, 0081, 0000, Gateway
0043, 0593, 1593, Hewlett Packard
1781
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
DVD mode
DVD Recorder
1416
DVD
DVD
Accurian
Advent
Aiwa
Akai
Alco
1416
1016
0641
0695, 0770, 0899
0790
Magnavox
0503, 0539, 0646, Accurian
0675, 0821, 1268
0539
Apex Digital
1056
1168
1129
0490
0675, 1334
1158
0741, 1158, 1304,
1730
Marantz
Memorex
Microsoft
Mintek
Aspire Digital
CyberHome
Denon
Funai
Gateway
Go Video
0695, 0831, 1270
0522, 1708
0839, 0717
1521, 0521
0741
Allegro
Apex Digital
0869
0672, 0717, 0755, Mitsubishi
0830, 1056, 1061
1023
NAD
NEC
Arrgo
0785
Aspire Digital
Audiovox
Blaupunkt
Blue Parade
Broksonic
Cinea
Cine Vision
Citizen
Coby
1168
0790
0717
0571
0695
0831
0876, 0833, 0869
1277
0778, 1107
0831
Nesa
0717
1402
iLo
JVC
LG
LiteOn
Magnavox
1348
1164
0741
NexxTech
Norcent
Onkyo
Oritron
Panasonic
1003, 1107
0503, 0627
0651
0490, 0703, 1362, Panasonic
1462, 1490, 1762 Philips
0503, 0539, 0646, Pioneer
0675, 0854, 1158, RCA
1260, 1267, 1354
0525, 0571, 0631
1061
0539
0770
0675
1158, 1416, 1440
0646, 0675
0490
0646, 1158
0631
0522
0490, 1470
1158
Philips
Craig
Curtis Mathes
CyberHome
Samsung
Sensory Science
Sharp
Sony
Sylvania
Zenith
1087
Pioneer
0816, 0874, 1023, Polaroid
1024, 1117, 1129 Polk Audio
0784, 0705, 0770, Portland
0833, 0869, 1169, Presidian
0630, 0675
1033, 1431
0675
Daewoo
0741
1172
Prima
1016
Denon
Disney
Durabrand
DVD2000
Emerson
0490, 0634
0675, 1270
1127
0521
0591, 0675, 0821,
1268
Proscan
Pro Vision
Qwestar
RCA
0522
0778
0651
Home Theater in Box
Aiwa
0641
0790
1770, 1771, 1772,
1773
0522, 0571, 0717, Audiovox
0790, 0822, 1022, JVC
1132
Enterprise
ESA
Fisher
Funai
Gateway
GE
Go Video
0591
0821, 1268
0670
0675, 1268, 1334
1158
0522, 0815, 0717
0744, 0715, 0741, Sansui
0783, 0833, 0869, Sanyo
1044, 1075, 1099, Sensory Science
Rio
Rotel
Sampo
Samsung
0869
0623
0752
KLH
Koss
Oritron
0790
0651
0651
0539
0790
0869
0869
0790
0490, 0573, 0744, Polk Audio
0820, 0899, 1044, RCA
1075, 1470
0695
0670, 0695, 0873
1158
Rio
Sonic Blue
Teac
Venturer
0790
1158, 1304, 1730
0741
0717
0582, 0702
0573, 0664, 1247
0672
1500, 1588
1348
0717
1268
0627
0702
Sharp
0630, 0675, 0752,
1256
1117
GoldStar
Greenhill
Harman/Kardon
Hitachi
Hiteker
Humax
iLo
Sharper Image
Sherwood
Shinsonic
Sonic Blue
Sony
0770
0533, 0839
0869, 1099
0533, 1533, 0864,
1033, 1431, 1536
0821
0675, 0821, 1268
0675, 0821
0717, 0790
0490, 0703
0571
Initial
Superscan
Sylvania
Symphonic
Teac
Insignia
Integra
JBL
Jensen
JVC
1016
Technics
0558, 0623, 0867, Theta Digital
1164, 1602, 1770, Tivo
1503
1771, 1772, 1773
0790
0490, 0534
0717, 0790, 1149
0651
Toshiba
0503, 0695, 1045,
1154, 1503, 1515,
1588
0503
0839
Kawasaki
Kenwood
KLH
Urban Concepts
US Logic
Venturer
Xbox
Yamaha
Koss
Lasonic
Lenoxx
LG
0798
1127
0790
0522, 1708
0490, 0539, 0545
0503, 0591, 0741,
0869
0591, 0741, 0869
1058, 1158, 1416, Zenith
1440
LiteOn
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
Audio mode
Amplifier
Receiver
Home Theater in Box
Amstrad
Bose
Curtis Mathes
Durabrand
GE
Harman/Kardon
JVC
Left Coast
Lenoxx
Linn
Marantz
NEC
Optimus
Philips
Pioneer
Polk Audio
RCA
0078
0674
0300
1561
0078
0892
0331
0892
Koss
1366, 1497
1798
1437
1293, 1869
1497
1189, 1269, 0531, Audiovox
1514 Bose
1189, 1269, 0891, Cambridge Soundworks
1289
1393
1751
1389, 1751
1389
0135, 0842, 1298, Durabrand
1320, 1531
1023, 0531, 1074
1366, 1497
1308, 1518, 0367, Insignia
1288, 1316, 1548, Integra
1633, 1763, 1764
1189, 1269, 0891, JVC
1266, 1289, 1673
1023, 0014, 0150, KLH
0531, 0630, 1123, Koss
1384, 1823
1508
Aiwa
1388, 1641
1563, 1615
1563, 1615
1609
1257, 1430
1390
1229, 1933
1370
1352
1389
1420
1250
2832
1561
1517
1532
1426
1751
1298
1306
1374, 1495, 1676,
1871
Lasonic
Lenoxx
LG
Liquid Video
Magnavox
Amphion Media Works
AMW
Anam
Apex Digital
Marantz
1561
Classic
Coby
Criterion
Daewoo
Denon
0269, 0282, 0829
0892, 0269
0264
0300, 0823
0892, 0269
0013, 0300, 0823
0892, 0269
0300, 0823
0264
0689, 0815, 1126
0078
0331
0078, 0013
0354, 0133
Mitsubishi
NexxTech
Norcent
Nova
Onkyo
Gateway
Go Video
Initial
Optimus
Oritron
Panasonic
Shure
Sony
Soundesign
Victor
Wards
JBL
Philips
Yamaha
Pioneer
1390, 1412
1366, 1497
1798
1561
1293, 1869
1497
Lasonic
Lenoxx
LG
Receiver
Polaroid
Polk Audio
ADC
Aiwa
0531
1289, 1414
1254
1405, 0121, 1243, Proscan
Liquid Video
1388, 1641
1512
1390
1563, 1615
1563, 1615
1609, 1074
1257, 1430
1189
RCA
1023, 1609, 1254, Magnavox
0531, 1074, 1123, NexxTech
1514
1751
1389, 1751
1389
1298, 1531
1366, 1497
1288, 1316, 1548,
1633, 1763, 1764
1266, 1673
1384
1508
1289
1609, 1390, 1511
1437
1869
1519
1295, 1500
1469
1556
1517
Akai
Alco
1390, 1511
1437
Norcent
Nova
Amphion Media Works
AMW
Anam
Apex Digital
Audiotronic
Audiovox
Regent
Rio
Saba
Samsung
Sansui
Sanyo
1869
Onkyo
0531, 1519
1295, 1500
1764
Oritron
Panasonic
1390
1251, 1469
0771, 1286
1556
1517, 1653
1426
Philips
Pioneer
Polaroid
Polk Audio
RCA
Bose
1229, 0639, 1841, Sharp
1933
1602
1370
0531
1189
1352
1389
1420
1250
1414
Sharper Image
Brix
Sherwood
Shinsonic
Sirius
Sonic Blue
Sony
Cambridge Soundworks
Capetronic
Carver
Classic
Coby
Criterion
Daewoo
Delphi
1602
1532, 1869
Regent
Rio
1058, 1441, 1258, Saba
1759, 1622, 0474, Samsung
1406, 1558, 1658, Sanyo
1758, 1858, 1958
1023
1313
Sharper Image
Sherwood
Shinsonic
Stereophonics
Denon
1360, 0771, 1142, Sunfire
1426
1660, 2832
0463
1517
Teac
0463, 1074, 1390, Sonic Blue
1532, 1869
0689, 1622, 1558,
1658, 1758, 1858,
1958
Garrard
Gateway
Go Video
1528
Sony
Technics
Thorens
1308, 1518, 1384
1189
1532
Harman/Kardon
0110, 0891, 1304, Toshiba
1788
1390
0014
1406, 1414
0176, 1176, 1276, Zenith
1331, 1375, 1476
0857, 1293
Teac
1390, 1528
1788
1390
1331, 1375
1293
1306
1426
1751
Venturer
Wards
XM
Toshiba
Venturer
Yamaha
Initial
Insignia
Integra
JBL
0135, 1298, 1320
0110, 1306
Yamaha
JVC
0531, 1374, 1495, Zenith
1560, 1676, 1871,
1894
Kenwood
KLH
1313, 1570, 1569
1390, 1412
74
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Information
Weak Signal
This OSD appears when the digital channel that you have selected is too weak to receive or no
signal is being detected for that channel.
Weak Signal
0
No Program
It appears when that channel is not receiving a signal and you have the Noise Muting function
OFF and you have a single screen. It moves automatically every two seconds to prevent the
screen from burn-in.
Notes:
• Even if "NO PROGRAM" appears on the screen, your timer functions and auto shut off
functions that you set, are still active.
• If you are watching an analog channel, NO PROGRAM does not appear.
Invalid Signal
If you are inputting a PC signal that is invalid, "Invalid Signal" will appear on the TV screen. It
appears when the input is PC and it is a single screen.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Refer to the table below to check the condition. If you think that there is a problem, contact the
JVC Service Center where you purchased the television.
PROBLEMS
CHECK
There is no power
• See if the power cord became unplugged.
• Check for a blown fuse or circuit breaker or a power outage.
• The antenna could be disconnected.
There is no picture
or sound
• The input mode could be set improperly. See page 59.
• The tuner (Auto Tuner Setup) could be set improperly. See page 37.
• The TV station may be having difficulties. Check to see if other stations are working.
• Use the HDMI cable with HDMI logo
. See page 19.
• If you have a device connected to INPUT-1, INPUT-2 or INPUT-5 (set "V5 INPUT" in the
INITIAL SETUP menu to "HDMI"). You will not be able to hear any audio from the
AUDIO OUT on the back of the TV.
• You cannot output audio using the OPTICAL OUTPUT when you have digital sound from
an HDMI device connected to the INPUT-1, INPUT-2 or INPUT-5 (set "V5 INPUT" in the
INITIAL SETUP menu to "HDMI") connection on the back of the TV.
(See page 18).
• This TV can accept 480i (Composite / S / HDMI / Component), 480p, 720p and 1080i
signals. Please check your settings.
Remote control is not • Check to see that the batteries are still working and properly installed.
operating properly or • Make sure the remote has a clear sight path to the TV.
at all
• You may be too far from the TV. You must be within 23 feet (7 meters).
You cannot select a
certain channel
• Make sure the channels have been programmed. See "Channel Summary", page 38.
• Check to see if the channel is locked. See "Channel Summary - Lock" page 39.
The power turns off
by itself
• Make sure the set did not become unplugged.
• Perhaps the On/Off Timer is set. See page 57.
• Check to see if the Sleep Timer was set. See page 66.
It does not operate
correctly
• This television is operated by a microprocessor. It is possible that external noise or
interference is causing the problem. If the television does not function correctly, remove the
electrical plug from the wall outlet and wait a while before inserting it into the wall outlet
again and operating the television.
The clock is wrong
• The power was interrupted and the clock was not reset. See page 56.
The color quality
is poor
• Tint and Color may be improperly adjusted. See page 50.
• The Video Status mode may be turned to the wrong setting. See page 65.
There are lines
across the picture
• There could be interference from another electrical appliance, such as a computer,
another TV or VCR. Move any such appliances further away from the TV.
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference.
The picture is spotted
There are double
pictures (ghosts)
• A building or passing airplane can reflect the original signal and produce a second,
slightly delayed one. Adjust your antenna position.
Picture is snowy
(image noise)
• Your antenna may be damaged, disconnected or turned. Check the antenna
connection. If the antenna is damaged, replace it.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
PROBLEMS
CHECK
Screen is 80% black
• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 34.
Stereo or bilingual
programs can't be
heard
• Make sure the MTS settings are correct. See page 64.
Static electricity
• It is normal to feel static electricity if you brush or touch the screen.
You hear occasional
crackling sounds
• It is normal for the TV to make crackling sounds when first turned on or off. Unless
the sound or picture become abnormal, this is fine.
• Press the CHANNEL- and VOLUME- buttons on the side panel of the TV simultaneously
for a few seconds. The Digital Tuner will be reset. If this does not reset it correctly, unplug
the power cord and plug it back in.
It does not operate
correctly
The picture is slightly • Change the picture format setting on your external device to 1080i or other resolution.
cut off when you use
1080p format only
The screen
disappears except for
the menu screen
• This occurs when you select a digital menu when your input source is from the HDMI
connection. Press the menu button.
My HDMI device
doesn’t work or
doesn’t work properly
• This JVC television can accept a variety of HD signals, including 720/60p, 1080/60i and
1080/60p. It does not accept a 1080/24p signal. Please note that in some cases, a Blu-ray
or HD-DVD may only offer the choice of 1080/60i or 1080/24p. In this case, it is necessary
to choose the 1080/60i output. Please refer to your Blu-ray/HD-DVD manual for complete
details on choosing the correct output.
The following are not malfunctions.
•
The television may make a creaking sound if the temperature of the room or the
temperature of the inside of the television changes. If there is no problem with the screen or
sound, then there is no need to worry.
•
Although the picture may be temporarily disturbed and noise may be seen on the screen if
the power is turned on immediately after it has been turned off, this is not a malfunction.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model
LT-37X898
LT-42X898
LT-47X898
Type
LCD Flat Television
Reception Format
NTSC, BTSC System (Multi-Channel Sound) ATSC Terrestrial, Digital Cable
VHF 2 to 13, UHF 14 to 69 at ATSC,
CATV 135 Sub, Mid, Super, Hyper and Ultra bands at Digital Cable
Reception Range
VHF 2 to 13, UHF 14 to 69 CATV 125 Sub, Mid, Super, Hyper and Ultra bands
(191 channel frequency synthesizer system) at Analog
•
Reception of channel A-5 ("95" of the TV set's on-screen cable channel numbers)
is not recommended for your TV set.
Power Source
AC 120V, 60 Hz
Power Consumption
240W
280W
355W
37 inch / 94 cm
measured diagonally,
16:9 ratio
42 inch / 106.7 cm
measured diagonally,
16:9 ratio
47 inch / 119.4 cm
measured diagonally,
16:9 ratio
Screen Size
Audio Output
Speakers
10W + 10W
4.5 x 16cm Twin Oblique Cone x 2
Antenna Terminal
(VHF/UHF,
ATSC/DIGITAL
CABLE IN)
75 ohms (VHF/UHF)(F-type connector)
480i
S (Input 3)
Input 3, 4, 5
Terminal
Y: 1 Vp-p positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
Video: 1 Vp-p, 75 ohms
Audio: 500 mVrms (-4dBs) high impedance
Input 3, 4 Terminal
(Component Terminal)
1080i / 720p / 480p / 480i
Y: 1 Vp-p positive, 75 ohms (negative sync provided)
PB/PR: 0.7 Vp-p 75 ohms
Video: 1080p / 1080i / 720p / 480p / 480i
Input 1, 2, 5 Terminal
(HDMI Input Terminal)
Audio: 2ch PCM, 32 / 44.1 / 48 KHz 16 / 20 / 24 bit
•
Personal computer compatibility cannot be guaranteed.
Input 5
(PC Input Jacks)
Analog RGB D-SUB (15 pin) x 1, RS-232C (9 pin) x 1
• PC signal is available. Refer to page 23 for details on the signals which can be input.
Audio Output Jacks
(FIX)
FIX : 500mVrms (-4dBs), Low Impedance
Optical Output
Digital Audio
Digital Out (optical) x 1
35 1/2 x 25 3/4 x 9 1/8
(with stand)
90.1 x 65.1 x 23
(with stand)
39 3/4 x 27 7/8 x 11 3/4
(with stand)
100.7 x 70.8 x 29.6
(with stand)
44 1/4 x 30 1/2 x 11 3/4
(with stand)
112.1 x 77.4 x 29.6
(with stand)
Dimensions (inch/cm)
W X H X D
35 1/2 x 23 3/4 x 5 1/2
(without stand)
90.1 x 60.1 x 13.9
(without stand)
39 3/4 x 26 x 5 1/8
(without stand)
100.7 x 66 x 13
(without stand)
44 1/4 x 28 5/8 x 5 1/8
(without stand)
112.1 x 72.7 x 13
(without stand)
52.8 / 24 (with stand)
61.6 / 28 (with stand)
77 / 35 (with stand)
Weight (lbs / kg)
48.4 / 22 (without stand)
52.8 / 24 (without stand)
68.2 / 31 (without stand)
Accessories
Refer to "unpacking your TV", page 9
Specifications subject to change without notice.
• The open source software is embedded in this product. For more information, please go to:
78
Download from Www.Somanuals.com. All Manuals Search And Download.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
87
Download from Www.Somanuals.com. All Manuals Search And Download.
JVC COMPANY OF AMERICA
Division of JVC Americas Corp.
1700 Valley Road
JVC CANADA, INC.
21 Finchdene Square
Scarborough, Ontario
Canada, M1X 1A7
Wayne, New Jersey, 07470
Download from Www.Somanuals.com. All Manuals Search And Download.
|