LCD Television Users Guide
1080p HDTV
32" class (31.5" Diagonal)
LT-32J300
LT-32JM30 32" class (31.5" Diagonal)
LT-42J300
LT-46J300
42" class (42" Diagonal)
46" class (45.9" Diagonal)
®
As an “ENERGY STAR ” partner, JVC has determined that
®
this product or product model meets the “ENERGY STAR ”
guidelines for energy efficiency.
Please read the important notice for energy efficiency on page 7.
Important Note:
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this
guide. Keep this user’s guide in a convenient place for future reference. Keep the carton
and original packaging for future use.
Serial Number:
LCT2520-002C-A
0709TMH-II-IM
Model Number:
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
16) Place the television on a stable, flat surface. Failure to do so can result in the television
falling, causing injury.
17) Do not allow young children to play around or on the television. Do not hang from the TV.
Failure to do so can result in the television falling, causing injury.
18) Do not allow young children to play with the plastic bag that came with the television when
you unpacked it. Failure to do so can result in suffocation, causing injury.
19) Avoid improper installation and never position the unit where good ventilation is
impossible. When installing this TV, distance recommendations must be maintained
between the set and the wall, as well as inside a tightly enclosed area or piece of furniture.
Keep to the minimum distance guidelines shown for safe operation.
200 mm
7 7/8 in
200 mm
7 7/8 in
150 mm
5 7/8 in
150 mm
5 7/8 in
50 mm
2 in
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
20) Cautions for installation
— Do not tilt the TV towards the left or right, or towards the back.
— Install the TV in a corner on the floor so as to keep cords out of the way.
— The TV will generate a slight amount of heat during operation. Ensure that
sufficient space is available around the TV to allow satisfactory cooling.
— Have two people remove the TV from the box with the screen facing away
from you. It's possible your clothing, (such as a belt buckle or button) may
scratch the front of the TV. Do the same when moving the TV to another
location.
21) When attaching to a wall, use the optional JVC wall mounting unit.
For LT-32J300 / LT-32JM30: JVC-XUF-2637 LCD FLAT WALL MOUNT
For LT-42J300: JVC-XUF-2637 LCD FLAT WALL MOUNT
For LT-46J300: JVCPCM-MS2 TILT/FLAT WALL MOUNT
Caution
— Consult qualified installers.
— See the included manual on mounting procedures.
— JVC is not responsible for damages or injuries due to improper mounting.
— Use with other wall mounting unit is capable of resulting in instability or causing possible
injury.
22) Make enough room for inserting and removing the power plug. Place the TV as close
to the outlet as possible. The main power supply for this TV is controlled by inserting or
removing the power plug.
23) Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
24) When this TV is connected to the wall outlet, it is always on standby even when all the LED
lamps are not lit. To shut down the TV, unplug the TV from the wall outlet.
FCC Notice:
Caution: Changes or modifications not expressly approved by party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
TVPG . . . . . . . . . . . . . . . . . 37
Guide . . . . . . . . . . . . . . . . 37
Warnings . . . . . . . . . . . . . . . . . . 2
ImportantSafetyInstructions . . . 3
PC . . . . . . . . . . . . . . . . . 38
Auto Adjustment . . . . . . . . . . . . . 38
Phase Adjustment . . . . . . . . . . . . 38
PC H-Position . . . . . . . . . . . . . . . . 38
PC V-Position . . . . . . . . . . . . . . . . 38
Reset . . . . . . . . . . . . . . . . . . 38
Getting Started
Key Features . . . . . . . . . . . . . . . 6
Logos & Licenses . . . . . . . . . 7
Package Contents . . . . . . . . . 8
Sound . . . . . . . . . . . . . . . . . 39
MTS . . . . . . . . . . . . . . . . 39
Digital Audio (ML) . . . . . . . . . . . . 39
Surround . . . . . . . . . . . . . . . . 39
Sound Status . . . . . . . . . . . . . . . . 39
Audio Reset . . . . . . . . . . . . . . . . 39
Basics
TVBasicControls . . . . . . . . . . . 13
RemoteControl . . . . . . . . . . . . . 18
InitialSetup . . . . . . . . . . . . . . . 22
Power . . . . . . . . . . . . . . . . . 40
Power Indicator . . . . . . . . . . . . 40
Advanced
Setting . . . . . . . . . . . . . . . . . 41
Plug-In Menu . . . . . . . . . . . . . . . . 41
Customizing your TV . . . . . . . 24
Picture . . . . . . . . . . . . . . . . . 26
Video Status . . . . . . . . . . . . . . . . 26
Color Temp . . . . . . . . . . . . . . . . 27
Color Management . . . . . . . . . . . . . 27
Dynamic Gamma . . . . . . . . . . . . . . 27
Smart Picture . . . . . . . . . . . . . . . . 27
Digital VNR . . . . . . . . . . . . . . . . . 27
MPEG NR . . . . . . . . . . . . . . . . . 27
Natural Cinema . . . . . . . . . . . . . . . . . 27
Video Reset . . . . . . . . . . . . . . . . . 27
Time Zone
.
.
.
.
.
.
.
.
.
.
.
.
41
D.S.T. . . . . . . . . . . . . . . . . 41
Language . . . . . . . . . . . . . . . . 41
Noise Mute
Front Panel Lock . . . . . . . . . . . . 41
Transparency . . . . . . . . . . . . 41
Auto Shut Off . . . . . . . . . . . . . . . . 41
Control with HDMI . . . . . . . . . . . . . 42
System Info . . . . . . . . . . . . . . . . 42
.
.
.
.
.
.
.
.
.
.
.
.
41
Auto Demo
Optical Out
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
42
43
Display . . . . . . . . . . . . . . . . 28
Video Input Label . . . . . . . . . . . . . . 28
Photo Viewer . . . . . . . . . . . . . . . . 28
Aspect . . . . . . . . . . . . . . . . . . . . 30
Etc.
ConnectingYourDevices . . . . . 44
Troubleshooting . . . . . . . . . . . . 50
Specifications . . . . . . . . . . . . 52
Warranty . . . . . . . . . . . . 53
Notes . . . . . . . . . . . . . . . . 55
TV . . . . . . . . . . . . . . . . . 31
Closed Caption . . . . . . . . . . . . . . . . 31
C.C. Type . . . . . . . . . . . . . . . . . . . 31
C.C. Setting . . . . . . . . . . . . . . . . . . . 31
Tuner Mode . . . . . . . . . . . . . . . . 32
Auto Scan . . . . . . . . . . . . . . . . 32
Add Channel . . . . . . . . . . . . . . . . 32
Edit Channel . . . . . . . . . . . . . . . . 33
V-Chip . . . . . . . . . . . . . . . . 33
Password . . . . . . . . . . . . . . . . 34
MPAA . . . . . . . . . . . . . . . . 35
Can. Eng. . . . . . . . . . . . . . . . . 36
Can. Fre. . . . . . . . . . . . . . . . . 36
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Features
Your JVC TV is equipped with many features. Here is some key features
highlighted in detail.
1 Stunning picture quality via 1920x1080 Full HD panel.
Dynamic Gamma and Color Management give further
fine tuned picture reproduction. Smart Picture adjusts the
best possible picture quality automatically scene by scene
based on the incoming signal from any source!
2 JVC exclusive oblique cone speakers provide excellent
TV sound quality. OmniSurround sound provides you 4
different settings based on the program you are watching.
The equalizer will fine tune your listening preferences.
3 Full connectivity with 3 HDMI, 2 Component, 1 S-video and others. The variety of
connections are explained in pages 44 to 49.
x 1
x 3
x 2
4 Aspect mode will show every pixel you are getting in High Definition. The Full Native mode
will show 100% of 1080p. Full – with slight overscan. Panorama, Cinema will fill the screen
with various aspect settings.
Full or Widescreen Mode
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Logos & Licenses
®
As an “ENERGY STAR ” partner, JVC has determined that
®
this product or product model meets the “ENERGY STAR ”
guidelines for energy efficiency.
This JVC Television is factory set to “Home” mode, which is optimized for normal home viewing.
This setting reduces power consumption to help the environment and to comply with ENERGY
®
STAR qualification.
Enabling certain features and functionality in this TV (e.g., Video Status) may increase its energy
®
consumption, possibly beyond the limits required for ENERGY STAR qualification.
Manufactured under license from Dolby Laboratories. "Dolby", and
the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI Logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
Notice:
• The open source software is embedded in this product. For more information, please go to:
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents
AAA Batteries x 2
Television x 1
Remote Control x 1
Insert the batteries
Use two “AAA” batteries (included).
Place the "–" end in the unit first, making sure the "+" and "–" markings are correct. Place the
"–" end in the unit first.
If this symbol is shown, it is only
valid in the European Union
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the frame and stand
Your TV has a glossy frame and stand which have protection sheets attached to them. Peel
them off before use, but only after the TV has been properly placed. Take care with handling
the glossy frame and stand because these surfaces are delicate.
Normally, light dusting with a soft, non-scratching duster will keep your TV clean.
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly
moistened with water. You can add a few drops of mild liquid detergent to the water to help
remove spots of oily dirt.
• DO NOT allow liquid to enter the TV through the ventilation slots.
• DO NOT use strong or abrasive cleaners on the TV.
• DO NOT spray liquids or cleaners directly on the TV’s surface.
• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.
Frame
Stand
Caring for the Screen
The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.
• DO NOT apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the
screen. These will remove the coating layer and cause discolorations.
• DO NOT push or hit the screen. This could cause scratches on the screen surface and image
distortions.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents
Avoiding Temporary Burn-in
Displaying fixed images for extended periods of time can leave a subtle but temporary burn-in
image on your screen. To avoid this, mix your viewing pattern.
Examples include, but are not limited to the following:
For example...
• Stock-market report bars
• Shopping channel logos and pricing
displays
TV on
TV off
• Video game patterns or scoreboards
• Bright station logos
• Internet web sites or other computer-style
images
• DVD discs, video tapes, laser discs
• Broadcast, cable, satellite channels or
digital television tuners/converters
XYZ
XYZ
Disconnecting the back panel screw
The LT-46J300 has one screw on the back panel hole for safety use. Please remove the screw
when you are attaching a wall mounting unit and placing the TV onto a wall.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Install your TV
To prevent the TV from falling, thread the belt through the hole on the back of the stand and
secure it to the TV rack.
Hole
Belt and screw (not included)
Tidying the cables
A cable holder which keeps your connection cables tidy is attached to the back of the stand.
Connect the stand
The LT-32J300 / LT-32JM30 TV stand is not attached to the TV when you purchased it. Please
follow the steps below on how to connect the stand to the TV.
1) Insert the TV stand onto the TV.
2) Tighten the 5 screws to the back of the TV.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents
Disconnecting the stand
1) Place the TV face down on a soft cloth on a table.
2) Remove the screws from the back of the TV.
3) Pull out the stand from the TV.
Notes:
• To re-install the stand, reverse the procedure from 3) to 1).
• If you find it difficult to remove the screws from inset screw wells, use a magnetized
screwdriver.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Basic Controls
Front Panel
Remote Control Sensor
Power Lamp
1
2
2
1
Side Panel
Input
Change the input
INPUT
MENU
1
2
1
MENU
2
5
Used to access the TV’s onscreen
menus.
CHANNEL
3
4
+CHANNEL–
Move sequentially through the
channels.
3
OK
VOLUME
+VOLUME–
Raises or lowers the volume.
BACK
4
5
6
POWER
Turn the TV on or off.
POWER
6
PHOTO VIEWER
Photo Viewer Connector
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Basic Controls
Rear Panel
8
2
9
3
4
5
7
1
6
INPUT 1
INPUT 2
INPUT 3
75 Ω
(VHF/UHF)
HDMI™ Connector
1
* This is used when you are using
DVI analog audio
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you connect your television to another device, please refer to the proper diagrams for
your specific TV and remote. These will help assist you in understanding how to connect your
television to another device, as well as use the remote to set up your television. Some of the
connection terminals are color coded for easy connection with the proper cables.
To find the best possible connection that your device can use, see pages 16 - 17.
For more detailed information about connecting external devices, see pages 44 - 49.
HDMI
(INPUT 1, 2, or 3)
1
DVD Player
STB (Digital Cable,
satellite) Tuner Box
DVI ANALOG AUDIO
2
3
5
Composite / Component
(INPUT 4 or 5)
4
Game Console
Video Camera
PC (with HDMI)
S-Video
Antenna / Cable
6
DIGITAL AUDIO
OPTICAL OUT
7
8
AUDIO OUT
Audio System
D-SUB
9
PC
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Basic Controls
Video
Best
Video Connection
Connection Cable
TV Connection
HDMI
HDMI Cable
INPUT 1, 2 or 3
DVI – HDMI Cable,
Audio Cable
Input 1 +
DVI ANALOG AUDIO
DVI + Audio
Component
Component
Video + Audio
Video + Audio
INPUT 4 or 5
S-Video Cable,
Audio Cable
INPUT 4 +
AUDIO Input
S-Video + Audio
Good
Composite
Composite
Video + Audio
Video + Audio
INPUT 4 or 5
Audio
Best
Audio Connection
Connection Cable
TV Connection
OPTICAL AUDIO
Cable
DIGITAL AUDIO
OPTICAL OUT
OPTICAL INPUT
AUDIO INPUT
(L / R)
AUDIO OUT
(L / R)
Audio Cable
Good
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Compatible Signal
Notes
Input
• HDMI (Digital)
HDMI™ (v.1.3, HDMI™ CEC Support)
Please usa a High Speed HDMI™ Cable.
High Speed HDMI™ Cable are tested to
carry an HD signal up to 1080p and higher.
See pages 48, 49.
SD: 480i, 480p
HD : 720p, 1080i, 1080p/24Hz,
1080p/30Hz, 1080p/60Hz
Audio L/R
Input
• DVI (Digital)
SD: 480i, 480p
See page 47, 49.
HD : 720p, 1080i, 1080p/24Hz,
1080p/30Hz, 1080p/60Hz
• Audio L/R (Analog)
Input
• Component (Analog)
SD: 480i, 480p
HD: 720p, 1080i
• Audio L/R (Analog)
See page 45.
Input
• S-Video (Analog)
• Audio L/R (Analog)
See pages 45, 47.
See page 45.
Input
• Composite (Analog)
• Audio L/R (Analog)
Compatible Signal
Notes
Output
• Audio L/R (Digital)
(PCM or Dolby Digital)
See page 46.
Output
• Audio L/R (Analog)
(Fixed)
See page 46.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
The following pages gives you a brief description of each button’s function.
Allows you to adjust the way the image appears on your TV based on the
format that is being received.
Full / Regular / Slim / Panorama / Cinema / Full Native
See page 30.
Turns the TV on or off.
Switch between devices connected to Video-1, 2, 3, 4 and 5. For V4
(Video-4) and V5 (Video-5) you must select the signal input type first (ie.
composite, S-Video, or component). To do so, you need to press the V4
or V5 button until the correct type is highlighted. Select “Composite 1”
for composite video signal input, “S-Video” for S-video signal input, or
“Component 1” for component video signal input. Select “Composite 2”
for composite video signal input or “Component 2” for component video
signal input. Select “PC” for PC signal input.
Change channels.
Allows you to set the TV to turn on and set the TV to turn off
automatically after a set amount of time and channel of your choice.
On Timer / Input / Sleep Timer
Timer
On Timer
Input
0 h
0 m
0 - 0
min
Sleep Timer
0
Notes:
• If you set the interval of On Timer by pressing the ¥ Š buttons,
select channel at Input and press OK.
• After you set On Timer and turn off the TV, power lamp lights.
• You can check the remaining time of On Timer by displaying
this menu again.
• You can set the interval of Sleep Timer by pressing the ¥ Šꢀbuttons.
• 60 seconds before the TV turns off, a message will appear and it will
count the remaining time.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital broadcast sometimes offers sub
channels. By using the SUB CH button, you
can select a sub channel easily.
For example, to move to sub channel 123-45:
1) Press 1, 2 and 3 in order
2) Press the SUB CH button
3) Press 4 and 5 in order
4) Press the TUNE button
Allows you to listen to a program in Stereo,
Mono sound or another language (Sap) if
available. First you must set the MODE to TV
on your remote.
Notes:
• When you are receiving a digital broadcast,
if there are other languages, you can change
the language by pressing the ML/MTS
button.
• Keep the TV in stereo mode to get the best
sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono
sound only.
• Choose the mono setting to reduce
excessive noise on a certain channel or
broadcast.
• MTS is unavailable if your television’s Input
source is (V1, V2, V3, V4, V5).
• ML/MTS will not work when you are using
HDMI.
Lets you decide the input channel and select it.
After pressing the remote 0 - 9 buttons, press
TUNE.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
The following pages gives you a brief description of each button’s function.
Has three functions.
Return – Returns to the channel viewed just before the channel currently
onscreen.
Return+ – Lets you program a specific channel to return to while
scanning through the channels using the – CH + button as
you memorize the channel.
TV – Returns to the TV mode as you are watching a video, DVD, etc.
Note:
• Press TUNE and RETURN+ TV buttons. This will memorize the
current channel to return to while you scan through the other channels.
To cancel, press TUNE and RETURN+ TV buttons again.
You can view program information for Digital Channels.
Note:
• The GUIDE will not show the correct time and date depending on the
Time Zone and D.S.T. settings. See page 41.
Turns the TV volume to 0. Press again to restore the volume.
Raise or lower the volume.
Allows you to choose different picture settings according to personal
preferences. You can access this feature for each input (TV, V1, V2, V3,
V4, V5).
Standard / Dynamic / Theater / Game
See page 26.
You can choose several types of sound modes.
Speech / Jazz / Classic / Rock / User
See page 39.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
View current channel information.
Used to select the mode of closed caption.
Used to navigate through the TV’s onscreen
menus.
Used to access the TV’s onscreen menus.
See page 24.
Go back to a previous onscreen menu or to
correct a mistake.
Move sequentially through the channels.
Allows you to save channels you like so you
can view them easily. First you must register
the channels you like.
Notes:
Favorite
• Go to the channel you
want to register and press
1
2
the FAVORITE. A list
will appear. Press the
4
FAVORITE button again to
5
register your channel.
• To view your favorite
channels, press
6
7
FAVORITE. Move ›‚ꢀto
9
select your channel and
11
press OK.
• To erase your favorite
channels, press
13
FAVORITE :Add
:Remove
FAVORITE. Move ›‚ꢀto
select your channel and
press ¥ Š
.
• Both analog and digital channels can be
registered.
• The channels you registered will appear in
numerical order at the top of the list.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
When you turn on your TV for the first time, the Initial Setup menu appears automatically.
These menus will help you setup your TV with basic information for Language, Time and
Tuner Setup. You can also set this setting in the Plug In Menu. See page 41.
1) Turn on the TV
2) Set the language
1 Select a language
2 Select “Next”
Set Language/Langue/Idioma
English
Next
3 Move to next menu
2 Select “Next”
3) Set the mode
Select Home for use at home.
Retail is used in the TV store.
1 Select a mode
Set Mode
Home
Next
3 Move to next menu
3 Select “Next”
4) Set time attribute
1 Change settings
Set Time Attribute
Time Zone
D.S.T.
Atlantic
On
Next
4 Move to next menu
2 Select an item
Time Zone Choose the time zone you live in.
D.S.T.
Changes the clock automatically for daylight
saving time. On / Off
22
Download from Www.Somanuals.com. All Manuals Search And Download.
5) Set TV attribute
1 Change settings
3 Select “Start Scan”
Set TV Attribute
Tuner Mode
Air
Start Scan
Exit
4 Start scanning
channels
2 Select an item
Tuner Mode
Choose Air (antenna) or Cable
Notes:
• If you use a set top box (satellite or cable box), press Exit to skip this step.
• If you want to turn off the Auto Demo, press the MENU button.
“Thank you! Setup is now complete”
Cable Users: After your auto tuner setup is complete, you may, (depending on the type of
hookup), have only 1 channel, usually 2, 3 or 4 in the auto tuner memory. This
is normal.
We have an important note for customers who subscribe to basic cable services (do not have
a separate cable box) and plan to use their JVC TV remote control to select channels.
Once you run the Auto Tuner Setup (which detects and programs all the channels your TV is
receiving through the RF input), every channel number available from your cable company
will appear in your television’s Channel Summary and they will all be marked as available for
scanning. Even though every channel is detected and appears as available, you will only be
able to view those that you specifically subscribe to from your cable company. This will likely
mean there are blank channels between those channels you wish to scan or “surf”.
We apologize for any inconvenience this may cause but it is important to note that this is
not a malfunction of your television. If you want to sequentially scan those channels you
subscribe to without blank ones in between, you can contact your cable company for their
cable box and remote, or manually deselect them using the edit / skip feature on page 33.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your TV
You can customize your TV by operating the menus on the TV screen. The TV screen displays
the Menu Bar, Menu Item and available items are highlighted.
Picture
Video Status
Display
TV
Sound
Power
Setting
Standard
Tint
0
0
0
0
0
0
–
–
–
–
–
–
50
25
–
–
–
–
–
–
100
100
100
100
100
100
Color
Menu Bar
Menu Item
Contrast
50
Bright
43
Detail
94
Backlight
50
Color Temp
Color Management
Dynamic Gamma
Smart Picture
Digital VNR
MPEG NR
Natural Cinema
Video Reset
Cool
Off
On
On
High
On
On
Guide
OK
BACK
MENU
:Exit
:Select
:Operate
:Back
Choose from several preset Video modes.
Explanation of function displays
Using the menus
1) Display the menu bar
2) Display the desired menu
Picture
Display
TV
Sound
Power
Setting
Picture
(P. 26)
Display
(P. 28)
TV
(P. 31)
Sound
(P. 39)
Power
(P. 40)
Setting
(P. 41)
1 Press ¥ꢀŠ to select a menu
2 Press ‚ to select a menu item
24
Download from Www.Somanuals.com. All Manuals Search And Download.
3) Change or adjust the setting
1 Press ›‚ to select
Video Status
Tint
Standard
a menu item
0 –
– 100
50
25
0 –
0 –
0 –
0 –
0 –
– 100
– 100
– 100
– 100
– 100
Color
Contrast
50
2 Press ¥ꢀŠ to change the setting
■ To enter an item’s sub menu
Bright
43
Detail
94
Backlight
50
Select
Enter
Color Temp
Color Management
Dynamic Gamma
Smart Picture
Digital VNR
MPEG NR
Natural Cinema
Video Reset
Cool
Off
On
On
High
On
On
Video Input Label
AIR TV
Full
Thumbnail View
Interval
Photo Viewer
Aspect
10
(Example: Photo Viewer)
■ To the previous screen
4) Close the menu
Note:
• Depending on the situation (analog channels, digital channels, video signal format, external
inputs, etc.), some items will be displayed in gray and can not be selected.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
Picture
Video Status
Choose different display settings according to personal preferences. You can use this feature
with TV, V1, V2, V3, V4 and V5.
Standard
Resets the picture display to the factory settings.
Dynamic
Gives a vivid picture with better contrast when viewing in a brightly lit room.
Theater
Gives a rich, film-like look to video when viewing in a dimly lit room.
Game
Used for when you are playing video games connected to your TV.
Notes:
• Each mode is memorized for each analog TV / composite / S-Video, digital TV, HDMI,
component signal input.
• Each video status can be chosen along with your favorite picture settings (Tint, Color,
Contrast, Bright, Detail and Backlight).
■ Allows you to change and adjust the way the picture appears on your television.
Tint
Allows you to adjust the levels of red and green on your TV.
Color
Allows you to make all the colors on your TV appear more vivid or subtle.
Contrast
Allows you to adjust the level of black and white on your TV giving you a darker or brighter
picture overall.
Bright
Allows you to adjust the overall brightness of the TV.
Detail
Allows you to adjust the level of fine detail on your TV.
Backlight
Allows you to adjust the brightness of the internal lamp which effects the overall brightness of
the TV.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Temp
Allows you to adjust colors to look as accurate as possible. Cool / Natural / Warm
Color Management
Allows you to compensate for dull colors to ensure dull colors are reproduced with natural hues.
On / Off
Dynamic Gamma
Allows you see more detail in very dark or bright areas so these areas don’t appear “muddied”.
Normally, this feature should be left On for optimum picture quality. On / Off
Smart Picture
Allows the TV to adjust the brightness level automatically to a level suitable for what you are
watching. On / Off
Digital VNR
This function can be selected to change the effect of Digital VNR (Video Noise Reduction).
High – Adjusts the effect maximally
Low – Adjusts the effect minimally
Off – Function is turned off.
MPEG NR
This function effects the block noise removal and mosquito NR (Noise Reduction)
simultaneously.
Note:
• When you are receiving digital channels, block noise removal will have no effect.
Natural Cinema
Allows you to compensate for image blurring when the original video you are watching was shot
at 24 frames/sec, and is broadcast at 30 frames/sec. This conversion process is known as
“TELECINE”. On / Off
Notes:
• When you are receiving a 480p, 720p or 1080p signal, Natural Cinema cannot be selected.
• Natural Cinema is only applied for NTSC, SD 480i and HD 1080i signals.
Video Reset
Resets all picture adjustments at once to the default settings, except for Natural Cinema.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
Display
Video Input Label
Allows you to label all the devices you have connected to the TV that use the VIDEO-1, 2, 3, 4
and 5 inputs.
VCR
DVD
1 Select
PVR
D-VHS
STB
SAT
AMP
GAME
CAM
DISC
2 Set
Blu-ray DVD
Default
Photo Viewer
Photo Viewer allows you to enjoy your digital pictures stored on your USB Mass Storage Class
devices. You can view them on the TV in high quality if USB Mass Storage device is connected
to the Photo Viewer terminal on the TV.
Thumbnail View
1 Select
Photo Viewer
Page
1
j1010001
j1010002
j1010003
j1010004
j1010005
:Select
j1010006
BACK
j1010007
TUNE
j1010008
j1010009
OK
MENU
:Exit
:Operate
:Back
:Slide show
2 Display
When you select Thumbnail view and press OK, a folder or file list will be displayed. Select
your folder by using the ¥ꢀŠ or ›‚ buttons. Choose a picture and press the OK button. It
will now be shown on the screen. To move to the next picture, press the Š button. To move to
the previous picture, press the ¥ button.
* If there is more than 10 images, those images will be shown in the next page. To go to the
next page, select the last image on the page and press the Š or ‚ buttons. To go back to
the previous page, press the ¥ or › buttons.
Slide Show
– In Thumbnail View screen, you can view slide show by pressing the TUNE button.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Display help screen
90º Rotation
(in Slide Show)
Play/Pause
Move to the right
Move to the lower left
Move down
Move to the upper left
Move up
Move to the upper right
Move to the lower right
Move to the left
Reset
* Move functions only work when pictures are zoomed in.
Enlarge
Reduce
Interval
Choose Slide Show Interval of 5, 10 or 20 seconds by pressing the ¥ꢀŠ buttons.
Notes:
• Gently pull out your USB device from the Photo Viewer terminal after finishing the Photo
Viewer menu.
• Use the supplied USB cable that came with your device. Do not use HUB or USB extension
cable.
• Photo Viewer cannot be guaranteed to work with all USB Mass Storage Devices. It may take
some time to display or it may not display correctly.
notes regarding your devices you wish to connect.
• Supported file formats are “.jpg” or “.JPG”.
• All your stored data should be backed up first as a precaution before connecting to the TV.
• Depending on your stored file size, it can take extra time to display “Photo Viewer” page.
• Depending on your stored file type, some data may not be able to be displayed in the
thumbnail screen.
• Vous pouvez voir les photos HDD uniquement lors de l’utilisation des appareils photo Everio
comportant HDD
Display Continued...
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
Aspect
Allows you to adjust the way the image appears on your TV based on the format that is being
received.
Regular - When watching a 4:3 aspect
picture without modifying
Full - When watching a 4:3 aspect picture,
it is stretched to fit the dimensions of
the TV. When watching a 16:9 aspect
picture, it displays 95% of the ratio.
the original picture to fit the
dimensions of your 16:9 screen.
Black bars will appear along the
picture’s sides. The picture will be
centered within the boundaries of
the 16:9 screen.
Panorama - When watching a 4:3 aspect
picture it is stretched to fit the
dimensions of the 16:9 aspect
screen.
Cinema - This ratio “zooms in” on
the center part of a 4:3
aspect picture, blowing it up
proportionally to fill the 16:9
screen.
Full Native - This ratio displays 100%
of the ratio. Normally, all
aspects except for Full Native
display about 95%.
Slim - This aspect mode shrinks the
screen of a 16:9 broadcast to 4:3.
There are some programming that
is already stretched by mistake at
broadcasting companies, so this
mode corrects it. Black side bars will
appear.
Notes:
• Depending on the signal format, some aspect modes are unavailable.
• If you change the aspect mode after the television changed it to Full automatically, the
television will change to the aspect mode you choose. It also turns to Full automatically
when the TV receives an HD (1080p, 1080i or 720p) signal.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
TV
Closed Caption
Allows you to select the mode of the closed caption. First you must set the MODE to either TV,
STB or VCR on your remote. On / Smart / Off
Note:
• Smart caption will appear when you press the MUTING button only on channels where the
broadcast contains closed captioning.
C.C. Type
Allows you to select the type of the closed caption. Basic is for analog channel’s caption, and
Advanced is for digital channel’s caption. Auto / Basic / Advanced
C.C. Setting
You can choose between caption or text in mode to decide how closed captioning will appear.
Analog CC
Digital CC
Font
CC1
Service1
Default
Standard
Default
Default
Default
Default
Default
Off
1 Select
Font Size
Font Style
Text Color
Text Opacity
BG Color
BG Opacity
Edge Color
2 Adjust
Analog CC
Choose the CC feature that you like for analog closed captioning.
Digital CC
Choose the CC feature that you like for digital closed captioning.
Font
Choose the font that you like for closed captioning.
Font Size
Choose how big the text appears in closed captioning.
Font Style
Choose the style of the font in closed captioning.
Text Color
Choose the color of the text in closed captioning.
Text Opacity
Choose how translucent the text appears in closed captioning.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
BG Color
Choose the background box color for the Closed Captioning text.
BG Opacity
Choose how translucent the background box color for the Closed Captioning text.
Edge Color
Choose the color of the border of the background box color for the Closed Captioning text.
Note:
• The Font, Font Size, Font Style, Text Color, Text Opacity, BG Color, BG Opacity and BG
Color settings will not apply to closed caption of analog channels. In addition, some of these
settings for closed caption for digital channels may or may not be available, depending on the
closed captioning data being broadcast.
Tuner Mode
If you skipped this step in the initial setup or your setup has changed, you can redo your setup
in this menu. Air / Cable
Autoscan
Allows you to scan through all available channels your TV can receive, and memorizes them.
Note:
• The Autoscan is finished when the message “Scanning has completed” appears on the
screen.
Add Channel
Allows you to add analog channels. Regarding digital channels, the only channels that will
appear are the ones that are being broadcast.
1 Select
Please insert scan
number or range
to
Start
2 Start
Enter the new channel number
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Channel
Allows you to skip channels when using the + CH – button. “✔” means don’t skip, “ ” means
to skip. You can still access those skipped channels manually using the number buttons on the
remote.
Main Channel List
3-2
CH-2
CH-3
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
3-3
Select
5-0
6-0
6-0
11-0
14-0
22-1 CH-1
36-0
Select to skip or not to skip.
Also, select the channel.
63-0
V-Chip
Allows you to block channels or content that you deem inappropriate for children.
Notes:
• V-CHIP will not work with video signals from VCRs, DVD players, Blu-ray or camcorders
connected to the TV.
• (For Canadian viewers only) V-CHIP is designed specifically for the US and may not work
properly in Canada.
– When entering the password –
When you try and access the V-Chip menu, “Please input password” will appear. Press the
“0” button four times on your remote to access the V-Chip menu for the first time.
Please input password:
TV Continued...
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
– When you lock or unlock channels –
You can lock or unlock ratings as shown below.
1 Select
Password
MPAA
NR
G
PG
PG13
R
Can. Eng.
Can Fre.
TVPG
NC-17
X
2 Lock / Unlock
Note:
• If you lock a rating, any rating that is higher is automatically blocked.
Password
You can change the four digit password using
the number buttons on your remote.
New Password
Confirm Password
* If you forget your password, unplug the TV
from the wall and then plug it back in. Your
password will reset to “0000”
OK
Clear
1) Set a new password
Next
Enter the four digit number
2) Confirm and set
Next
Set
Enter the four digit number
34
Download from Www.Somanuals.com. All Manuals Search And Download.
MPAA
This setting is based on the US Motion Picture
Association of America (MPAA) ratings system.
NR
G
PG
PG13
R
NC-17
X
NR – Not Rated.
Any type of programming that does not contain a rating.
G – General Audience.
Suitable for all ages.
PG – Parental Guidance Suggested.
Suitable for all ages with parental guidance.
PG 13 – Parents Strongly Cautioned.
Intended for viewers 13 years or older.
R – Restricted.
Not recommended for viewers 17 years without parental guidance.
NC-17 – No One Under 17.
Not intended for viewers 17 years or younger.
X – No One Under 18.
Not intended for viewers 18 years or younger.
Viewing Guidelines:
At the beginning of a program, the program will display its rating and the content it contains
(Except for unrated programming).
A program can contain any or all of the following:
V/FV – VIOLENCE/FANTASY VIOLENCE
S – SEXUAL Content
L – Strong LANGUAGE
D – Suggestive DIALOG
TV Continued...
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
Can. Eng.
This setting is based on the Canada ratings
system.
E
C
C8+
G
PG
14+
18+
E – Exempt.
Any type of programming that does not contain a rating.
C – Intended for children.
Suitable for all ages.
C8+ – Intended for children over 8 years old.
Suitable for all ages over 8 years.
G – General Audience.
May contain material not suited for younger viewers.
PG – Parental Guidance.
May contain material not suited for younger viewers. Parents may consider some content not
appropriate for children 8 - 13 years old.
14+ – 14 Years or Older.
Parents strongly urged to use their discretion in allowing viewing by persons under 14.
18+ – Adult.
Intended for viewers 18 years or older.
Can. Fre.
For instructions on Can. Fre., please see page
36 in the French user’s guide.
E
G
8 Ans+
13 Ans+
16 Ans+
18 Ans+
36
Download from Www.Somanuals.com. All Manuals Search And Download.
TVPG
This setting is based on the US ratings system.
ALL FV
V
S
L
D
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
TV Y – Appropriate for all children.
Intended for all children 2 - 6 years old.
TV Y7 – Appropriate for older children.
Intended for children 7 years or older.
TV G – General Audience.
Suitable for all ages.
TV PG – Parental Guidance Suggested.
Suitable for all ages with parental guidance.
TV 14 – Parents Strongly Cautioned.
Intended for viewers 14 years or older.
TV MA – Mature Audiences Only.
Intended for viewers 18 years or older.
Viewing Guidelines:
In addition to the above ratings, you can also block or allow more specific content (Except for
unrated programming).
A program can contain any or all of the following:
V/FV – VIOLENCE/FANTASY VIOLENCE
S – SEXUAL Content
L – Strong LANGUAGE
D – Suggestive DIALOG
Guide
You can view program information. (Digital channels only)
Note:
• If the programming information is not being broadcast, the guide function has no effect or
may display incorrect information.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
PC
Notes:
• This menu will replace the TV menu when you connect a PC to your TV terminal. See page
49.
• There are some menus that PC mode can not use. (In Picture and Sound menu)
• As for Aspect in the Display menu, only Regular and Full are available.
Auto Adjustment
Adjust the screen position automatically.
Note:
• Sometimes Auto Adjustment will not operate properly. Either adjust with the following
functions or change the signal.
Phase Adjustment
Adjust it when noise shows up across the screen. Also, use it when letters become blurry.
PC H-Position
Allows you to adjust the screen position horizontally.
PC V-Position
Allows you to adjust the screen position vertically.
Reset
Resets all PC mode adjustments at once to the default setting.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
MTS
Allows you to listen to a program in stereo, mono sound or another language (SAP).
(Depending if available in the program) First you must set the MODE to TV on your remote.
Notes:
• When you are receiving a digital broadcast, if there are other languages, you can change the
language by pressing the ML/MTS button.
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• MTS unavailable if your television’s input source is (V1, V2, V3, V4, V5).
• ML/MTS will not work when you are using the HDMI.
Digital Audio (ML)
You can change the language if there are other languages available. (Digital channels only)
Surround
You can select the surround mode you like. Off / Movie / Music / News / Mono
Sound Status
You can choose several types of sound modes. User / Speech / Jazz / Classic / Rock
Note:
• If you select User, you can customize the various sound frequencies.
100Hz / 330Hz / 1KHz / 3.3KHz / 10KHz
Audio Reset
Resets all sound adjustments at once to the default settings.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
Power
Power Indicator
Allows you adjust the brightness of the blue power indicator light.
High – Light is brightly lit
Low – Light is dimly lit
Off – Light is off
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Plug In Menu
When you turn on your TV for the first time, the Initial Setup menu appears. If you skip it, or
your setup has changed, you can set it up in this menu anytime.
Time Zone
Choose the time zone you live in and the clock sets automatically.
Atlantic / Eastern / Central / Mountain / Pacific / Alaska / Hawaii
D.S.T.
Adjust your TV’s clock for Daylight Savings. On / Off
Language
Allows you to change the TV’s onscreen menu languages to English, French or Spanish.
Noise Mute
Displays a blank gray screen over channels that are too weak to be received clearly.
On / Off
Front Panel Lock
This allows you to lock the buttons on the side of the TV. On / Off
Transparency
Change the transparency of the menu screens. 1 / 2 / 3 / 4
Auto Shut Off
This function automatically shuts off your TV when there is no signal from the channel while the
TV is on for 10 minutes. On / Off
Setting Continued...
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
Control with HDMI
If you use a HDMI CEC compatible device, set this setting to “On”.
HDMI CEC (Consumer Electronics Control) allows the TV to connect and control multiple HDMI
CEC enabled devices with a single remote. CEC (Consumer Electronics Control) is an optional
protocol used in HDMI.
• HDMI CEC on this TV is compliant with “High-Definition Multimedia Interface Specification”.
• The TV does not support HDMI CEC functions that are not listed below.
• The TV does not guarantee to support use of all HDMI CEC enabled devices.
• Devices that are not enabled to HDMI CEC cannot be controlled with this TV.
– Control the TV using the HDMI CEC enabled device –
• Turn the TV on and switch to the video source of the operating device.
• Switch to the video source of the operating device.
• Turn the TV off with the HDMI CEC enabled device you are viewing.
• For operating instructions of the device, refer to the device’s manual.
– Control the HDMI CEC enabled device using the TV –
• Turn off the operating device by turning off the TV.
• Some device may not support this function. For more details refer to the device’s manual.
– Send status of the TV to the HDMI CEC enabled device –
• When switching the TV’s external input or channel.
• When switching the TV’s menu language.
• Information regarding behavior of the device when status is received, refer to the external
device’s manual.
If HDMI CEC does not work correctly:
• When HDMI CEC enabled device is connected to INPUT 1, INPUT 2 or INPUT 3 with an
HDMI cable, you may not be able to control TV’s external input. To solve the problem set this
setting to “Off”.
System Info
You can confirm the TV’s software version.
Auto Demo
Auto Demo explains this TV’s features to you.
Notes:
• The Auto Demo mode will start automatically when you set Retail in Initial Setup.
• If you press any button on the television or remote, with the exception of
POWER or MENU, the Auto Demo mode will stop for 30 seconds. After 30 seconds
have passed with no operation, the Auto Demo mode will start again.
• If you want to turn off the Auto Demo, press the MENU button.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Optical Out
You can select the optical digital sound output as PCM or DOLBY DIGITAL when your TV is
connected to an amplifier that has a DOLBY DIGITAL decoder. If you select DOLBY DIGITAL,
you can enjoy listening to 5.1ch sound when watching digital broadcasts. This only applies to
digital channels.
Notes:
• Optical Out can be used for both digital and analog channels.
• If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don’t
select PCM, it cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 60.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Devices
Notes:
• The following connection diagrams are examples on connecting some of the most common
devices to your TV. Please refer to your device’s instruction manual on other connection
methods or for devices not shown here in this instruction book.
• When you are finished connecting your devices, turn on your TV and devices.
Connect an Antenna or Basic Cable
Cable or Antenna
Output
INPUT 1
INPUT 2
INPUT 3
75 Ω
(VHF/UHF)
TV Rear Panel
Notes:
• If you are able to receive ATSC (Digital terrestrial) signal, High Definition (HD) broadcasting
can be watched.
• All digital broadcasting is not necessary High Definition. Check by pressing the DISPLAY
button.
• Digital broadcasting is not available in all areas.
Connect a Cable Box
CABLE BOX
Cable or Antenna
Output
INPUT 1
INPUT 2
INPUT 3
75
Ω
(VHF/UHF)
IN
OUT
TV Rear Panel
Note:
• To view channels on your cable box, make sure your TV’s channel is set to 2, 3 or 4
(depending on the area you live in).
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect a VCR / DVD Player using Component Video
Green cable is for “Y”
Blue cable is for “PB”
Red cable is for “PR”
TV Rear Panel
(INPUT 4)
Audio Out
Video Out
Y PB PR
L
R
VCR / DVD Player
Notes:
• Green, blue and red are the most common colors for Component Cables. Some models may
vary in color.
• To watch your VCR / DVD player, make sure your TV is displaying INPUT 4 or INPUT 5 by
pressing the V4 or V5 button on your remote control.
Connect a VCR / DVD Player using Composite Video
TV Rear Panel
(INPUT 5)
Yellow cable is for “Video”
White cable is for “L”
Red cable is for “R”
Audio Out
Video Out
Y
L
R
VCR / DVD Player
Notes:
• Yellow, white and red are the most common colors for Composite Cables. Some models may
vary in color.
• To watch your VCR / DVD player, make sure your TV is displaying INPUT 4 or INPUT 5 by
pressing the V4 or V5 button on your remote control.
• If your device has S-Video Output, you can use that instead of using Composite Cables.
Connect INPUT 4 (S-VIDEO) and S-video Output with an S-Video Cable.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Devices
Connect an Amplifier or Home Theater System
TV Rear Panel
(AUDIO OUT)
Amplifier
or
Home Theater System
Speaker
Speaker
Notes:
• Refer to your amplifier’s or Home Theater System’s manual for more information.
• If you have a device connected to INPUT 1, INPUT 2 or INPUT 3, you will not be able to hear
any audio from the AUDIO OUT on the back of the TV otherwise.
Connect an Amplifier using the DIGITAL AUDIO OPTICAL OUT
TV Rear Panel
(DIGITAL AUDIO OPTICAL OUT)
Amplifier
(with DIGITAL AUDIO OPTICAL INPUT)
Speaker
Speaker
Notes:
• Refer to your amplifier’s manual for more information.
• This terminal can only output digital audio (PCM or DOLBY DIGITAL).
• In order to use the optical output connection, select PCM or DOLBY DIGITAL. See page 43.
• You can not output sound from your DIGITAL AUDIO OPTICAL OUT connection if the audio
source is from your HDMI device.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect a Digital Source Device
TV Rear Panel
INPUT 1
DVI ANALOG
AUDIO
TV Rear Panel (INPUT 1)
INPUT 1
INPUT 2
INPUT 3
Digital Source Device
L
R
DIGITAL OUT
AUDIO OUT
After the connections have been made,
tighten the screw to secure the cables.
Notes:
• To watch your digital source device, make sure your TV is displaying INPUT 1 by pressing the
V1 button on your remote control.
• This TV can accept 480i, 480p, 720p, 1080i and 1080p signals via HDMI.
• The INPUT 1 DVI ANALOG AUDIO input can only be used with INPUT 1.
Connect a Camcorder
TV Rear Panel
(INPUT 4)
Camcorder
Notes:
• To watch video from your camcorder, make sure your TV is displaying INPUT 4 or INPUT 5
by pressing the V4 or V5 button on your remote control.
• If your device has S-Video Output, you can use that instead of using Composite Cables.
Connect INPUT 4 (S-VIDEO) and S-video Output with an S-Video Cable.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Devices
Connect a Blu-ray or HDMI Device
TV Rear Panel (INPUT 2)
INPUT 1
INPUT 2
INPUT 3
Blu-ray / HDMI Compatible Device
Notes:
• To watch your Blu-ray or HDMI device, make sure your TV is displaying INPUT 1, INPUT 2 or
INPUT 3 by pressing the V1, V2 or V3 button on your remote control.
• Some decoders may not respond depending on the equipment that is connected to the HDMI.
• This TV can accept 480i, 480p, 720p, 1080i and 1080p signals via HDMI.
• This JVC television can accept a variety of HD signals, including 720p, 1080i, 1080p/24Hz,
1080p/30Hz and 1080p/60Hz. Please note that in some cases, a Blu-ray may only offer the
choice of 1080/60i or 1080/24p. In this case, it is necessary to choose the 1080/60i output.
Please refer to your Blu-ray manual for complete details on choosing the correct output.
• Some HDMI Output Devices may fail to detect this TV as a 1080p device. If this occurs,
manually select 1080p on the HDMI Output Device.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect a Computer
PC
TV Rear Panel
Or...
PC
TV Rear Panel (INPUT 1)
INPUT
1
INPUT
2
INPUT
3
Notes:
• Make sure your TV is displaying INPUT 1, INPUT 2, INPUT 3 or INPUT 5 by pressing the V1,
V2, V3 or V5 button on your remote control.
• When you connect a PC using HDMI-DVI cable, connect an audio cable to INPUT 1 DVI
ANALOG AUDIO on the TV.
• Use a D-SUB cable with ferrite cores and no longer than 3 meters to avoid electromagnetic
disturbances.
• Refer to your computer’s manual for more information.
Format
VGA
Resolution
640 x 480
800 x 600
1024 x 768
V. Frequency
(Hz)
H. Frequency
(kHz)
Format
VGA
Resolution
640 x 480
V. Frequency
(Hz)
H. Frequency
(kHz)
60
60
60
31.5
37.9
48.4
60
60
60
60
31.5
37.9
48.4
67.4
SVGA
XGA
SVGA
XGA
800 x 600
1024 x 768
1920 x 1080
D-SUB
FHD
HDMI
Notes:
• Depending on signal quality, some pictures may not be displayed correctly.
• Computers that cannot set the refresh rate to 60 Hz, cannot be used with this TV.
• If you are inputting a PC signal that is invalid, “No signal or Signal can not be displayed” will
appear on the TV screen. It appears when the input is PC and it is a single screen.
• When you connect a PC using an HDMI cable, the TV image may not be displayed correctly.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Refer to the table below to check the condition. If you think that there is a problem, contact the
JVC Service Center where you purchased the television.
There is no power
• See if the power cord became unplugged.
• Check for a blown fuse or circuit breaker or a power outage.
There is no picture or sound
• The antenna could be disconnected.
• The tuner could be set improperly. See page 44.
• The TV station may be having difficulties. Check to see if other stations are working.
• Use the HDMI cable with HDMI logo.
• If you have a device connected to INPUT-1, INPUT-2 or INPUT-3, you will not be able to
hear any audio from the AUDIO OUT on the back of the TV.
• You cannot output audio using the DIGITAL AUDIO OPTICAL OUT when you have digital
sound from an HDMI device connected to the INPUT-1, INPUT-2 or INPUT-3 connection on
the back of the TV.
• This TV can accept 480i (Composite / S / HDMI / Component), 480p, 720p, 1080i and
1080p signals. Please check your settings.
Remote control is not operating properly or at all
• Check to see that the batteries are still working and properly installed.
• Make sure the remote has a clear sight path to the TV.
• You may be too far from the TV. You must be within 23 feet (7 meters).
The power turns off by itself
• Make sure the set did not become unplugged.
• Perhaps the Auto Shut Off is set. See page 41.
• Check to see if the Sleep Timer was set. See page 19.
It does not operate correctly
• This television is operated by a microprocessor. It is possible that external noise or
interference is causing the problem. If the television does not function correctly, remove
the electrical plug from the wall outlet and wait a while before inserting it into the wall outlet
again and operating the television.
The color quality is poor
• Tint and Color may be improperly adjusted. See page 26.
• The Video Status mode may be turned to the wrong setting. See page 26.
There are lines across the picture
• There could be interference from another electrical appliance, such as a computer, another
TV or VCR. Move any such appliances further away from the TV.
The picture is spotted
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial cable
connection which is less prone to interference.
There are double pictures (ghosts)
• A building or passing airplane can reflect the original signal and produce a second, slightly
delayed one. Adjust your antenna position.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture is snowy (image noise)
• Your antenna may be damaged, disconnected or turned. Check the antenna connection. If
the antenna is damaged, replace it.
Screen is 80% black
• The Closed Caption Text mode is on. Turn it off in the Closed Caption menu, page 31.
Stereo or bilingual programs can’t be heard
• Make sure the MTS settings are correct. See page 39.
Static electricity
• It is normal to feel static electricity if you brush or touch the screen.
You hear occasional crackling sounds
• It is normal for the TV to make crackling sounds when first turned on or off. Unless the
sound or picture become abnormal, this is fine.
The picture is slightly cut off when you use 1080p format only
• Change the picture format setting on your external device to 1080i or other resolution.
The screen disappears except for the menu screen
• This occurs when you select a digital menu when your input source is from the HDMI
connection. Press the MENU button.
My HDMI device doesn’t work or doesn’t work properly
• Please usa a High Speed HDMI™ Cable. High Speed HDMI™ Cable are tested to carry
an HD signal up to 1080p and higher.
No signal or signal can not be displayed
• This OSD appears when the digital channel that you have selected is too weak to receive
or no signal is being detected for that channel.
• It appears when that channel is not receiving a signal and you have the Noise Mute
function Off and you have a single screen. It moves automatically every two seconds to
prevent the screen from burn-in.
• Even if “No signal or signal can not be displayed” appears on the screen, your timer
functions and auto shut off functions that you set, are still active.
The following are not malfunctions.
• The television may make a creaking sound if the temperature of the room or the temperature
of the inside of the television changes. If there is no problem with the screen or sound, then
there is no need to worry.
• The picture may be temporarily disturbed and noise may be seen on the screen if the power
is turned on immediately after it has been turned off. This is not a malfunction.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
LT-32J300
LT-32JM30
Model
LT-42J300
LT-46J300
Type
LCD Flat Television
Reception Format
Reception Range
NTSC, BTSC System (Multi-Channel Sound) ATSC Terrestrial, Digital Cable
VHF 2 to 13, UHF 14 to 69 at ATSC,
CATV 135 Sub, Mid, Super, Hyper and Ultra bands at Digital Cable
VHF 2 to 13, UHF 14 to 69 CATV 135 Sub, Mid, Super, Hyper and Ultra bands
(191 channel frequency synthesizer system) at Analog
•
Reception of channel A-5 ("95" of the TV set's on-screen cable channel numbers)
is not recommended for your TV set.
Power Source
AC 120V, 60 Hz
Power Consumption
152W
215W
215W
32 inch / 80.03 cm
measured diagonally,
16:9 ratio
42 inch / 106.73 cm
measured diagonally,
16:9 ratio
45.9 inch / 116.80 cm
measured diagonally,
16:9 ratio
Screen Size
Audio Output
Speakers
10W + 10W
4 x 16cm Oblique x 2
Antenna Terminal
(VHF/UHF,
75 ohms (VHF/UHF)(F-type connector)
ATSC/DIGITAL
CABLE IN)
480i
S (Input 4)
Input 4, 5
Terminal
Y: 1 Vp-p positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
Video: 1 Vp-p, 75 ohms
Audio: 500 mVrms (-4dBs) high impedance
Input 4, 5 Terminal
1080i / 720p / 480p / 480i
(Component Terminal)
Y: 1 Vp-p positive, 75 ohms (negative sync provided)
PB/PR: 0.7 Vp-p 75 ohms
Video: 1080p / 1080i / 720p / 480p / 480i
Audio: 2ch PCM, 32 / 44.1 / 48 KHz 16 / 20 / 24 bit
Input 1, 2, 3 Terminal
(HDMI Input Terminal)
Analog RGB D-SUB (15 pin) x 1
PC Input Jacks
Audio Output Jacks
(FIX)
FIX : 500mVrms (-4dBs), Low Impedance
Digital Out (optical) x 1
Optical Output
Digital Audio
31 1/4 x 23 1/2 x 9 1/8
(with stand)
792 x 595.7 x 230
(with stand)
39 7/8 x 28 7/8 x 11 5/8
(with stand)
1013.6 x 733.5 x 296
(with stand)
44 3/8 x 31 1/2 x 11 5/8
(with stand)
1127 x 799.7 x 296
(with stand)
Dimensions (inch/mm)
W X H X D
31 1/4 x 21 1/2 x 4 3/8
(without stand)
39 7/8 x 26 5/8 x 4 1/2
(without stand)
44 3/8 x 29 1/4 x 4 1/2
(without stand)
792 x 544.9 x 109.6
(without stand)
1013.6 x 677.3 x 114.8
(without stand)
1127 x 743.5 x 114.8
(without stand)
28.6 / 13.0 (with stand)
49.1 / 22.3 (with stand)
55.4 / 25.2 (with stand)
Weight (lbs / kg)
26.8 / 12.2 (without stand)
45.5 / 20.7 (without stand)
51.9 / 23.6 (without stand)
Specifications subject to change without notice.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
54
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
U.S.A.
Canada
TOLL FREE: 1 (800) 252-5722
TOLL FREE: 1 (800) 964-2650
Remember to retain your Bill of Sales for Warranty Service.
JVC U.S.A.
Division of JVC Americas Corp.
1700 Valley Road
JVC CANADA, INC.
21 Finchdene Square
Scarborough, Ontario
Canada, M1X 1A7
Wayne, New Jersey, 07470
Download from Www.Somanuals.com. All Manuals Search And Download.
|