LCD Flat Television Users Guide
For Models:
LT-32X576
LT-26X576
Illustration of LT-32X576 and RM-C1257G
Important Note:
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this
guide. Keep this user’s guide in a convenient place for future reference. Keep the carton
and original packaging for future use.
Model Number:
LCT1827-001B-A
0705TNH-II-IM
Serial Number:
Download from Www.Somanuals.com. All Manuals Search And Download.
®
• As an “ENERGY STAR ” partner, JVC has determined
that this product or product model meets the
®
“ENERGY STAR ” guidelines for energy efficiency.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
16) Avoid improper installation and never position the unit where good ventilation is impossible. When
installing this TV, distance recommendations must be maintained between the set and the wall,
as well as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance
guidelines shown for safe operation.
200 mm
200 mm
50 mm
150 mm
150 mm
POWER
17) Cautions for installation
— Do not tilt the TV towards the left or right, or towards the back.
— Install the TV in a corner on the floor so as to keep cords out of the way.
— The TV will generate a slight amount of heat during operation. Ensure that sufficient space is
available around the TV to allow satisfactory cooling.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings
Avoiding Ghost Images
Displaying fixed images for extended periods of time can leave a subtle but temporary ghost
image on your screen. To avoid this, mix your viewing pattern.
Examples include, but are not limited to the following:
For example...
• Stock-market report bars
• Shopping channel logos and pricing
displays
TV on
TV off
• Video game patterns or scoreboards
• Bright station logos
• Internet web sites or other computer-style
images.
• DVD discs, video tapes, laser discs
• Broadcast, cable, satellite channels or
digital television tuners/converters.
XYZ
XYZ
Caring for the Cabinet
Normally, light dusting with a soft, non-scratching duster will keep your TV clean.
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly
moistened with water. You can add a few drops of mild liquid detergent to the water to help
remove spots of oily dirt.
• DO NOT allow liquid to enter the TV through the ventilation slots.
• DO NOT use strong or abrasive cleaners on the TV.
• DO NOT spray liquids or cleaners directly on the TV’s surface.
• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.
Caring for the Screen
The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.
Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.
These will remove the coating layer and cause discolorations.
Do not push or hit the screen. This could cause scratches on the screen surface and image
distortions.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings (Continued...)
How to move the cabinet
Your fingers may become trapped under
the TV, causing injuries. Hold the TV at the
bottom in the middle, and do not allow the TV
to tilt up or down.
The TV may fall causing injuries. Hold the
bottom of the stand with your hand and tilt
the TV up or down.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Important Safety Precautions . . 2
Warnings . . . . . . . . . . . . . 5
Quick Setup . . . . . . . . . . . 8
Unpacking your TV . . . . . . . . . . . . 8
TV Model . . . . . . . . . . . . . . . . 9
TV Remote Control . . . . . . . . . . . 10
Getting Started . . . . . . . . . . . . . 11
Using the Stand . . . . . . . . . . 11
The Remote Control . . . . . . . . . . 12
Connecting Your Devices . . . . . . . 13
Interactive Plug In Menu . . . . . . . . 21
Sound Adjust . . . . . . . . . 49
Sound Settings . . . . . . . . . . . . . 49
Adjust Sound Settings . . . . . . . . . 49
MTS (Multi-channel Sound) . . . . . . . 49
Reset . . . . . . . . . . . . . . . 49
Clock Timers . . . . . . . . . . 50
Set Clock . . . . . . . . . . . . . . . . 50
On/Off Timer . . . . . . . . . . . . . . . 51
Button Functions . . . . . . . 52
Multi Screen Function . . . . . . . . . . 52
Index . . . . . . . . . . . . . . . . . . . 52
Twin . . . . . . . . . . . . . . . . . . 52
Freeze . . . . . . . . . . . . . . . . . . 53
Swap . . . . . . . . . . . . . . . . . 53
Select . . . . . . . . . . . . . . . . . . 53
Power . . . . . . . . . . . . . . . . . . 54
Number Buttons . . . . . . . . . . . . . 54
Tune . . . . . . . . . . . . . . . . . 54
Input . . . . . . . . . . . . . . . . . . . 54
Channel +/- . . . . . . . . . . . . . 54
Volume +/- . . . . . . . . . . . . . 54
Return + . . . . . . . . . . . . . . . . 55
Sound . . . . . . . . . . . . . . . . . . 55
Muting . . . . . . . . . . . . . . . . . . 55
Video Status . . . . . . . . . . . . . . . 56
TheaterPro D6500K . . . . . . . . . . . 56
Sleep Timer . . . . . . . . . . . . . . . 56
Display . . . . . . . . . . . . . . . . . 57
C.C. . . . . . . . . . . . . . . . . . . . 57
Aspect . . . . . . . . . . . . . . . . . 58
Aspect Ratios . . . . . . . . . . . . . 58
Menu . . . . . . . . . . . . . . . . . . 59
OK . . . . . . . . . . . . . . . . . . . 59
Back . . . . . . . . . . . . . . . . . . . 59
TV/CATV Slide Switch . . . . . . . . . . 60
VCR/DVD Slide Switch . . . . . . . . . 60
VCR Buttons . . . . . . . . . . . . . . . 60
DVD Buttons . . . . . . . . . . . . . . . 60
Light . . . . . . . . . . . . . . . . . . . 60
Remote Programming . . . . . 24
Setting CATV, VCR and DVD Codes . . . 24
CATV or Satellite Codes . . . . . . . . 24
VCR Codes . . . . . . . . . . . . . . 25
DVD Codes . . . . . . . . . . . . . . 26
Search Codes . . . . . . . . . . . . . 27
Onscreen Menus . . . . . . . . 28
Using the Guide . . . . . . . . . . . . . 28
Onscreen Menu System . . . . . . . . . 29
Initial Setup . . . . . . . . . . 31
Auto Tuner Setup . . . . . . . . . . . . 31
Channel Summary . . . . . . . . . . . . 31
V-Chip . . . . . . . . . . . . . . . . . . 33
Set Lock Code . . . . . . . . . . . . . 39
Auto Demo . . . . . . . . . . . . . . . 40
Language . . . . . . . . . . . . . . . . 40
Closed Caption . . . . . . . . . . . . . 41
Auto Shut Off . . . . . . . . . . . . . . 41
XDS ID . . . . . . . . . . . . . . . . . 42
Noise Muting . . . . . . . . . . . . . . 42
Front Panel Lock . . . . . . . . . . . . 42
V1 Smart Input . . . . . . . . . . . 43
Video Input Label . . . . . . . . . . . 43
Position Adjustment . . . . . . . . . . . 44
Power Indicator . . . . . . . . . . . . . 44
Digital-In . . . . . . . . . . . . . . . . . 45
Digital-In Audio . . . . . . . . . . . . . . . 45
Appendices . . . . . . . . . . 61
No Program . . . . . . . . . . . . . . . 61
Troubleshooting . . . . . . . . . . . . . 62
Warranty . . . . . . . . . . . . . . . . . 63
Authorized Service Centers . . . . . . . 64
Specifications . . . . . . . . . . . . . . . 65
Notes . . . . . . . . . . . . . . . . . . 66
Picture Adjust . . . . . . . . . 46
Picture Settings . . . . . . . . . . . . . 46
Adjust Picture Settings . . . . . . . . . 46
Color Temperature . . . . . . . . . . . . 47
Digital Noise Clear . . . . . . . . . . . . 47
Natural Cinema . . . . . . . . . . . . 47
Color Management . . . . . . . . . . . . 48
Dynamic Gamma . . . . . . . . . . . 48
Reset . . . . . . . . . . . . . . . . . . 48
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Unpacking your TV
Thank you for your purchase of a JVC LCD Flat Television. Before you begin setting up your
new television, please check to make sure you have all of the following items. In addition to
this guide, your television box should include:
Two AA
Batteries
1 Remote Control
1 Television
TV CATV VCR DVD
POWER
MULTI SCREEN
TWIN
FREEZE SWAP
DISPLAY
INDEX
C.C.
SELECT
INPUT
1
4
7
2
3
6
SLEEP TIMER
SOUND
5
8
0
9
RETURN+
VIDEO STATUS TUNE
THEATER PRO ASPECT
LIGHT
OK
MUTING
CH
CH
+
VOL
–
VOL
+
–
MENU
BACK
VCR CHANNEL VCR/DVD
TV/VCR
PREV NEXT
POWER
REW
REC
PLAY
FF
STOP
PAUSE
OPEN/CLOSE
STILL/PAUSE
RM-C1257G
TV
Once you have unpacked your television, the next step is to connect it to your antenna/
cable or satellite system and to connect the audio/video devices you want to use with your
television. To make these connections you will use plugs like the ones illustrated below.
Component Cables
Composite Cables
Audio Cables
Coaxial Cables
Used to connect an
external antenna or
cable TV system to
your TV.
Used to connect audio/
video devices like
VCRs, DVD players,
stereo amplifiers, game
consoles, etc.
S-Video Cable
Used to make video
connections with S-Video
VCRs, Camcorders and
DVD players.
We recommend that before you start using your new television, you read your entire User’s
Guide so you can learn about your new television’s many great features. If you’re anxious to
start using your television right away, a quick setup guide follows on the next few pages.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
TV Model
NOTE: Before you connect your television to another device, please refer to the proper
diagrams for your specific TV and remote. These will help assist you in understanding
how to connect your television to another device, as well as use the remote to set up
your television.
Rear Panel Diagram
75Ω
(UHF/VHF)
75Ω
(UHF/VHF)
S-VIDEO
S-VIDEO
VIDEO
VIDEO
R
-
AUDIO
-
L
S-VIDEO
VIDEO
R
-
AUDIO
-
L
INPUT1
R
-
AUDIO
-
L
VIDEO
DIGITAL-IN
R
-
AUDIO
-
L
Y
Pr
R
Pb
-
A
U
D
I
O
-
L
S-VIDEO
VIDEO
R
L
INPUT2
R
-
AUDIO
-
L
VIDEO
DIGITAL-IN
INPUT3
R
-
AUDIO
-
L
Y
Pr
R
Pb
IU1CMPOENT
-
AUDIO
-
L
GTLNAUDIO
R
L
ADIOUT
Side Panel Diagram
POWER
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
TV Remote Control
POWER
TV CATV VCR DVD
MULTI SCREEN
TWIN
INDEX
C.C.
SWAP
SELECT
INPUT
FREEZE
DISPLAY
1
4
7
2
3
6
9
SLEEP TIMER
SOUND
5
8
0
RETURN+
TUNE
VIDEO STATUS
THEATER PRO
ASPECT
LIGHT
MUTING
OK
CH +
VOL
+
VOL
–
CH –
MENU
BACK
VCR/DVD
POWER
VCR CHANNEL
PREV NEXT
TV/VCR
REW
REC
PLAY
FF
STOP
PAUSE
OPEN/CLOSE
STILL/PAUSE
RM-C1257G
TV
RM-C1257G
Note:
• For information on remote control buttons, see pages 52 - 60.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Getting Started
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away.
If you have questions, or for more detailed information on any of these steps, please consult
other sections of this manual.
Step 1 - Using the stand
This TV comes with a Table Top Stand already attached.
This stand can be used to adjust the direction of the TV screen 5° up, 10° down and 20° to the
left or right.
Tilt the TV up or down
While holding the bottom of the stand with one hand,
use your other hand to hold the middle of the top of the
TV, and slowly tilt the TV up or down.
• As a safety measure, the stand is constructed so that
it requires a certain amount of force to tilt the TV.
Rotate the TV left or right
While holding the bottom of the stand with one hand,
use your other hand to hold the edge of the panel
and slowly adjust the direction of the TV stand.
Cable Holder
A cable holder which keeps your connection cables tidy is attached on the back of the stand.
Gently squeeze the left and right of the cable holder, and pull it to remove it from the stand.
After putting the cables in the cable holder, attach it to the back of the stand again.
Cable Holder
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Getting Started
Step 2 – The Remote Control
Before you can operate your remote control, you first
need to install the batteries (included).
Lift and pull the latch on the back of the remote
control to open. Insert two batteries (included)
carefully noting the “+” and “–” markings, placing
the “–” end in the unit first. Snap the cover back into
place.
When you change the batteries, try to complete
the task within three minutes. If you take longer
than three minutes, the remote control codes for
your VCR, DVD, and/or cable box/satellite receiver
may have to be reset. See pages 24 - 27.
Key Feature Buttons
The four key feature buttons at the center of the remote
can be used for basic operation of the television. The top
and bottom buttons will scan forward and back through the
available channels. To move rapidly through the channels
using JVC’s Hyperscan feature, press and hold CH+ or
CH–. The channels will zip by at a rate of five channels per
second. The right and left buttons will turn the volume up or
down. These buttons are also marked with four arrows and
are used with JVC’s onscreen menu system. To use the
onscreen menus, press the MENU button.
MUTING
OK
CH +
VOL
+
VOL
–
CH –
MENU
BACK
POWER
Basic Operation
Turn the television on and off by pressing the POWER button at the top right corner
of the remote. If this is the first time you are turning on the TV, the interactive
plug-in menu appears.
TV CATV V
• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if
you need to operate a cable box.
• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to
DVD to control a DVD player. Please see pages 24 to 27 for instructions on
programming your remote control to operate a cable box, VCR or DVD player.
V VCR DVD
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Step 3 - Connecting your devices
Remove the terminal cover
There are connection terminals behind the covers on the left and right
in the back of the TV. Remove these two covers before connecting an
antenna or other devices. The covers can be removed by removing the
hooks. When replacing the covers, place the side of the covers against
the TV and insert the hooks.
Note:
• Leave the terminal covers off if they do not fit properly. Do not force to
replace the covers. Doing so may damage the connection cables and
covers.
Connections
Please follow the flow chart below to determine which connection setup is right for you. Then,
refer to the appropriate diagrams to connect your television to other devices that you may
have. After you are finished connecting your devices, plug the power cord into the nearest
power outlet and turn on the TV.
A VCR is not necessary for operation of the television. If you follow these diagrams and the
television does not work properly, contact your local cable operator.
• To connect a DVD player, see Diagram #3. A DVD player is optional.
• If you have a satellite television system, please refer to the satellite TV manual.
Do you use a Cable TV Box?
Yes
No
Do you have a VCR?
Do you have a VCR?
Yes
No
Yes
No
Diagram #2 Diagram #1
Diagram #3 Diagram #1
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Cable or Antenna
Output
Diagram #1
Coaxial Cable
75Ω
(UHF/VHF)
OR
TV Rear Panel
IN
OUT
Cable Box
Note:
• If you do not have a cable box, connect the cable wire from the wall outlet into the back of
the TV.
Diagram #2
Cable or Antenna
Output
Coaxial Cable
IN
Two-Way
OUT OUT
Splitter
Cable Box
OUT
IN
TV Rear Panel
Ω
75
(UH
F/VHF)
VCR
IN
IN
OUT
TV Rear Panel
INPUT1
OUT
INPUT2
OR
Notes:
• If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the
LEFT AUDIO INPUT on the rear of the TV.
• Use the S-Video connection if possible for superior picture quality.
• Your VCR must be turned on to view premium cable channels.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Notes:
• Green, blue and red are the most common colors for DVD cables. Some models may vary
colors. Please consult the user’s manual for your DVD player for more information.
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete
one set of connections (DVD or audio output) before starting the other to avoid accidentally
switching the cables.
• You may also connect the DVD player to Input 1.
Diagram #3
Cable or Antenna
Output
Coaxial Cable
IN
Two-Way
Splitter
OUT OUT
75Ω
(UHF/VHF)
IN
S-VIDEO
R
L
V
VIDEO
IN
IPNUT1
OUT
R
-
AUDIO
-
L
OUT
TV Rear Panel
S-VIDEO
VIDEO
VCR
OR
IPNUT2
R
-
AUDIO
-
L
VIDEO
IPNUT3
R
-
AUDIO
-
L
Y
Pr
R
Pb
IU1CMPOENT
-
AUDIO
-
L
Y
Green
Blue
GLTNAUDIO
P
P
B
R
Red
AUDIO OUT
R
L
OUT
TV Rear Panel
DVD Player (OPTIONAL)
DIOUT
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Connecting to a Camcorder
You can connect a camcorder to you televison by using the input jacks located on the back of
the television.
TV Rear Panel
S-VIDEO
VIDEO
CAMCORDER
NUPT1
I
OR
R
-
AUDIO
-
L
S-VIDEO
VIDEO
NUPT2
I
R
-
AUDIO
-
L
IPNUT3
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on
the back of the TV, OR connect an S-Video cable from the camcorder to the back of the TV.
2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on
the back of the TV.
3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on
the back of the TV.
Note:
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the
LEFT AUDIO IN on the back of the TV.
Headphone Connection
You can connect a pair of headphones to the television using the headphone jack located on
the side of the television.
1) Plug a headphone jack into the headphone jack on the television’s side panel.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Connecting to an External Amplifier
TV Rear Panel
Speaker
Speaker
Amplifier
R
L
ADIOUT
1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the
LEFT AUDIO INPUT on the amplifier.
2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the
RIGHT AUDIO INPUT on the amplifier.
Notes:
• Refer to your amplifier’s manual for more information.
• You can use AUDIO OUTPUT for your home theater system.
• DVI analog sound can not be outputted.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Connecting to an AV Receiver using your television's
V1 Smart Input
By connecting your AV Receiver to your television's V1 Smart Input, you can watch picture
sources from many different devices, without having to change or use the other input
connections on your TV. This allows you to free up the other input connections so you can
connect more devices to your television.
TV Rear Panel
S-VIDEO
VIDEO
NPUT1
I
R
-
AU
DIO
-
L
S-VIDEO
VIDEO
NPUT2
I
R
-
AUDIO
-
L
VIDE
O
AV Receiver
INPUT3
R
-
AUDIO
-
L
MONITOR
OUT
Y
Y
Pr
R
Pb
IU1CMPOENT
-
AUDIO
-
L
GTLNAUDIO
MONOR OUT
R
L
ADIOUT
1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-1
on the back of your television.
2) Connect a Yellow Composite Cable from the AV Receiver's MONITOR OUT, into the VIDEO
INPUT-1 on the back of your television.
3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y
VIDEO INPUT-1 on the back of your television.
4) Connect a Blue Component Cable from the AV Receiver's PB MONITOR OUT, into the Pb
VIDEO INPUT-1 on the back of your television.
5) Connect a Red Component Cable from the AV Receiver's PR MONITOR OUT, into the Pr
VIDEO INPUT-1 on the back of your television.
Notes:
• Please refer to your AV Receiver instruction manual for more information on connecting your
speakers and other devices like a DVD player.
• Use your AV Receiver's remote to switch to the different devices you have connected.
• Some AV Receivers may not respond when the V1 Smart Input function is turned on.
• If you have video connections for each input device connected to your AV Receiver, you
should not connect them using both S-Video and Composite connection at the same time
when you are using V1 Input as the V1 Smart Input. In this case we recommend using the
S-Video connection.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Connecting to a Digital TV Receiver
By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in
their digital form.
NUPT
I
TV Rear Panel
VIDEO
DTV Decoder
IPNUT3
R
-
AUDIO
-
L
Y
TV Rear Panel
Pr
R
DIGITAL OUT
AUDIO OUT
Pb
IU1CMPOENT
L
R
-
AUD
IO
-
L
GLTNAUDIO
DI
AIDOUT
HDMI to DVI Cable
After the connections have been made,
tighten the screw to secure the cables.
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to
the DIGITAL-IN on the back of your television.
2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO
DIGITAL-IN on the back of your television.
3) Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFT AUDIO
DIGITAL-IN on the back of your television.
• The digital-in terminal is not compatible with the picture signal of a personal computer.
• Use a HDMI to DVI cable (commercially available) in order to digitally connect the television
with a DTV decoder.
Notes:
• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance
may be slightly shifted. Access the “DIGITAL-IN” in the initial setup menu to adjust it. (Refer
to page 45.)
• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to
ANALOG. See "DIGITAL-IN AUDIO", page 45.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Connecting to a HDMI Compatible Device
By connecting a HDMI compatible device, high definition pictures can be displayed on your
TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI
compatible device.
HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all
digital audio/video interface. HDMI provides and interface between any audio/video source,
such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a
digital television (DTV).
HDMI Compatible Device
DIGITAL OUT
AUDIO OUT
L
R
HDMI Cable
1) Connect the HDMI Cable from the DIGITAL OUT on the back of your DTV or HDMI device, to
the DIGITAL-IN on the back of your television.
Note:
• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to
DIGITAL. See "DIGITAL-IN AUDIO", page 45.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Plug-In Menu
Step 4 – The Interactive Plug In Menu
When you turn your television on for the first time the interactive plug-in menu will appear. The
plug-in menu helps you to get your TV ready to use by letting you set your preferences for:
• The language in which you want the onscreen menus to appear.
• Setting the TV’s clock to the correct time so your timer functions will work properly. You can
choose “AUTO” or “MANUAL” for setting the clock.
• The auto tuner setup of which channels you wish to receive.
We recommend you complete the interactive plug-in items before you start using your
television.
Notes:
• The interactive plug-in menu setting does not appear if your TV has been turned on before.
In this case use the onscreen menus to perform these settings. See pages 40, 50, 31.
• If you press the Menu button while setting up the interactive plug-in menu, it will skip over it.
Language
After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically
switches to the LANGUAGE settings. You can choose to view your onscreen menus in three
languages: English, French (Français) or Spanish (Español).
LANGUAGE/LANGUE/IDIOMA
è
To choose a language:
(English, Français or Español)
†
To NEXT (To set clock)
ENGLISH
NEXT
MENU
SELECT OPERATE
EXIT
(To be continued...)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Plug-In Menu
Auto Clock Set
Before you use any of your TV’s timer functions, you must first set the clock. You may precisely
set your clock using the XDS time signal broadcast by most public broadcasting stations. If you
do not have this in your area, you will have to set the clock manually. See manual clock set
below. To set the clock using the XDS signal:
è
†
To choose AUTO
To TIME ZONE
SET CLOCK
è
To select your time zone: (Atlantic, Eastern,
Central, Mountain, Pacific, Alaska or
Hawaii)
MODE
AUTO
-- : -- --
TIME
TIME ZONE
D.S.T.
ATLANTIC
ON
†
To move to D.S.T. (Daylight Savings Time)
NEXT
è
†
To turn D.S.T. ON or OFF
MENU
SELECT OPERATE
EXIT
To NEXT (To Auto Tuner Setup)
Notes:
• D.S.T. can be used only for US and Canada when it is set to ON in the SET CLOCK menu.
• Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts
your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on
the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in
October.
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
Manual Clock Set
To set your clock manually (without using the XDS signal), choose MANUAL. If you choose
AUTO, see auto clock set above.
SET CLOCK
è
†
To choose MANUAL
To TIME
MODE
MANUAL
-- : -- --
è
†
To set the hour
To minute
TIME
TIME ZONE
D.S.T.
ATLANTIC
ON
è
†
To set the minute
To Start Clock
START CLOCK
MENU
SELECT OPERATE
EXIT
Note:
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
(To be continued...)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Plug-In Menu
Auto Tuner Setup
In auto tuner setup, the TV automatically scans through all available channels, memorizing the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.
è
To choose CABLE or AIR (or SKIP when
you skip Auto Tuner Setup)
AUTO TUNER SETUP
TUNER MODE
†
To START
CABLE
START
SELECT OPERATE
NOW
PROGRAMMING !
MENU
EXIT
48
Programming will take approximately 1 to 2
minutes.
When the setup is finished, THANK YOU! SETUP IS NOW COMPLETE is displayed. Your
quick setup is now complete. You can now begin watching your television, or you can continue
on in this guide for more information on programming your remote control, or using the
JVC onscreen menu system to customize your television viewing experience.
Notes:
• Noise muting will not work during Auto Tuner Setup.
• Skip appears only for interactive plug-in menu.
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is
normal.
The Quick Setup is complete
STOP
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
Setting the CATV, VCR and DVD Codes
You can program your remote to operate your cable box, satellite receiver, VCR or DVD
player by using the instructions and codes listed below. If the equipment does not respond
to any of the codes listed below or to the code search function, use the remote control
supplied by the manufacturer.
Cable Box or Satellite Codes
The remote control is programmed with cable box and satellite codes for power on/off,
channel up/down, and 10 key operation.
1) Find the cable box or satellite brand from the list of codes shown below.
2) Slide the 2-way selector switch to “CATV”.
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10
key pad.
4) Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.
• If your cable or satellite box does not respond to the first code, try the others listed. If it does
not respond to any code, try the search codes function, on page 27.
Cable Box
ABC
CODES
024
Cable Box
Puser
CODES
032
Digital
Satellite
Systems
CODES
Archer
032, 025
051, 032
022, 051
058, 059
024, 032, 025
029
RCA
061, 070
032
Echostar
100, 113, 114,
115
Cableview
Citizen
Realistic
Regal
058, 064, 040,
041, 042, 045,
068
Express VU
G.E.
100, 113
Curtis
106
Diamond
Eagle
Regency
034
G.I.
108
Rembrandt
037, 032, 051,
038
Gradiente
Hitachi
112
Eastern
GC Brand
Gemini
034
032, 051
022, 043
104, 111
Samsung
051
HNS (Hughes)
Scientific Atlanta 057, 058, 059
104
General Instrument 065, 024, 025,
026, 027, 020,
021, 022, 057,
SLMark
051, 047
051, 056
032, 051
Panasonic
Philips
105
Sprucer
Stargate
102, 103
023
Primestar
108
Hamlin
040, 041, 042,
045, 058, 064
049, 024
Telecaption
Teleview
Texscan
Tocom
067
Proscan
RCA
106, 109, 110
106, 109, 110
Hitachi
Jerrold
047, 051
044
065, 024, 025,
026, 027, 020,
021, 022, 057,
023
Sony
107
035, 036, 066
050
Star Choice
104, 108
Toshiba
Unika
Toshiba
Uniden
101
Macom
049, 050, 051,
054
102, 103
032, 025
Universal
Videoway
Viewstar
Zenith
022, 032
052
Magnavox
033
030
Memorex
Movietime
029, 030
063, 046
046
032, 051
039, 037, 048
Oak
Panasonic
055, 056, 060,
071, 073
Zenith/Drake
Satellite
Paragon
Philips
063
028, 029, 030,
052, 053, 031,
069
Pioneer
Pulsar
047, 062
051, 032
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
VCR Codes
The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,
rewind, pause, record, channel up/down operation.
1) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10
key pad.
4) Release the DISPLAY button, and confirm the operation of the VCR.
• If your VCR does not respond to the first code, try the others listed. If it does not respond to
any of the codes, try the search codes function on page 27.
• After you program your remote, some VCR buttons may not work properly. If so, use the
VCR’s remote.
• To record, hold down the REC button on the remote and press PLAY.
VCRs
CODES
035
027, 032, 095
VCRs
CODES
VCRs
CODES
Admiral
Aiwa
Marantz
Marta
003, 004, 005
064
Samsung
037, 060, 062,
033, 089
Samtron
Sansui
089
Akai
029, 072, 073, Memorex
074
024, 067
003, 026, 020,
052
038, 040, 047,
048, 041, 042
MGA
Audio Dynamic 003, 005
Sanyo
Scott
063, 067, 091,
071
Bell & Howell
Broksonic
Canon
063, 071
020, 026, 094
023, 025
043
Minolta
058, 045, 093
Mitsubishi
038, 040, 047,
048, 041, 042,
078, 090
059, 060, 062,
067, 038, 040,
047, 048, 026,
020
CCE
Multitech
NEC
047, 027, 062
Citizen
064
003, 004, 005,
000
Sears
063, 064, 065,
066, 058, 000,
001
Craig
063, 029, 064
Curtis Mathes
045, 024, 027,
093
Olympic
024, 023
Shintom
Sharp
075
Optimus
028, 021, 035,
064
Daewoo
043, 059, 024,
092
035, 036, 080,
088
026, 020
Orion
DBX
003, 004, 005
Panasonic
023, 024, 021,
022
Signature 2000 027, 035
Dimensia
Emerson
045, 093
Singer
Sony
075
043, 026, 077,
061, 025, 042,
020, 076
Penney
024, 058, 045,
063, 003, 004,
005, 093
028, 029, 030,
053, 054, 055
SV 2000
Sylvania
027
Fisher
Funai
063, 066, 067,
065, 071, 091
Pentax
Philco
058, 005, 045,
093
031, 023, 024,
027
027, 026, 020,
000
031, 024, 027,
023, 026, 020,
043
Symphonic
Tashiro
Tatung
027, 081
064
033, 045, 024
G.E.
Philips
031, 023, 024,
086
003, 004, 005
Go Video
037, 051, 049,
050, 089
Teac
003, 004, 027,
005
Pioneer
Proscan
023
Goldstar
064
045, 058, 023,
024, 031, 046,
059, 060, 033,
087, 093
Technics
021, 022, 023,
024
Gradiente
083, 084, 081,
000, 001
Teknika
Toshiba
024, 027, 070
059, 046, 079
Hitachi
023, 045, 058,
027, 081, 093
Quasar
021, 022, 023,
024
Vector Research 005
Instant Replay 024, 023
Wards
Yamaha
Zenith
035, 036, 067,
044, 064
Radio Shack
033, 024, 063,
036, 067, 040,
027
Jensen
JVC
003
000, 001, 002,
003, 004, 005
063, 003, 004,
005
033, 045, 058,
023, 024, 031,
046, 059, 060,
083, 084, 085,
087, 093
RCA
Kenwood
LXI
003, 004, 064,
005
044, 082, 064,
094
027, 064, 058,
065, 066, 063,
067
Realistic
024, 063, 036,
067, 040, 027
Magnavox
031, 023, 024,
086
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
DVD Codes
The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,
rewind, previous/next chapter, tray open/close, and still/pause operation.
1) Find the DVD player brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10
key pad.
4) Release the DISPLAY button, and confirm the operation of the DVD player.
• If your DVD player does not respond to the first code, try the others listed. If it does not
respond to any of the codes, try the search codes function on page 27.
• After you program your remote, some DVD buttons may not work properly. If so, use the
DVD player’s remote.
DVD Player
Aiwa
CODES
043
DVD Player
RCA
CODES
021, 026
Apex
040
Sampo
Samsung
Sharp
034
030
028
038
Denon
Hitachi
JVC
020, 037
030, 031
000
Silvania
Sony
Kenwood
Konka
035
024, 045, 046,
047
039
Mitsubishi
Onkyo
Oritron
Panasonic
Philips
Pioneer
Raite
025
Technics
Toshiba
Vialta
020
041
023
044
050
020
Wave
042
023, 036
022
Yamaha
Zenith
020
027, 032
033
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
Search Codes
Cable/Satellite Search Codes Function
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press the POWER and RETURN+ buttons. Hold for at least three seconds and release.
3) Press the POWER button on the remote, and see if the cable or satellite box responds.
4) If there was a response, press RETURN+. The codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use
the remote control that came with your equipment.
5) Press RETURN+ to exit.
VCR/DVD Search Codes Function
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or
“DVD”.
2) Press the VCR or DVD POWER and RETURN+ buttons. Hold for at least three seconds and
release.
3) Press the VCR or DVD POWER button, and see if the VCR or DVD responds.
4) If there was a response, press RETURN+. The codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for
the DVD player), and there is no response, use the remote control that came with your
equipment.
5) Press RETURN+ to exit.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
Using the Guide
Certain symbols are used throughout this guide to help you learn about the features of your
new television. The ones you will see most frequently are:
π† Up and Down arrows mean press the CH+ or CH– buttons. Pressing the CH+ or CH–
buttons let you:
• Move vertically in a main menu screen
• Move through a submenu screen
• Move to the next letter, number, or other choice in a submenu
• Back up to correct an error
• Scan through TV channels (when not in a menu screen)
è Left and right arrows mean press the VOLUME+ or VOLUME- buttons to move left or right
to:
• Select a highlighted menu item
• Select an item in a submenu
• Select numbers in certain menu options
• Turn the volume up or down (when not in a menu screen)
The “press button” icon means you should press the button named on your remote
control. (Button names appear in SMALL CAPITAL LETTERS.)
The “helping arrow” icon points to the highlighted or selected item in a menu.
To bring up the onscreen menu, press the MENU button on the remote control. The item that
appears in green is the one currently selected. If you use the Menu button on the TV’s front
panel instead of the remote, an additional menu screen showing INPUT, VIDEO STATUS and
ASPECT will appear between INITIAL SETUP and PICTURE ADJUST. The “interactive plug-in
menu” will appear the first time the TV is plugged in.
INITIAL SETUP
PREVIOUS
AUTO TUNER SETUP
CHANNEL SUMMARY
V-CHIP
SET LOCK CODE
OFF
AUTO DEMO
NEXT PAGE
(4/4)
MENU
SELECT OPERATE
EXIT
Note:
• Menus shown in this book are illustrations, not exact replications of the television’s onscreen
displays.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
The Onscreen Menu System
Your television comes with JVC’s onscreen menu system. The onscreen menus let you make
adjustments to your television’s operation simply and quickly. Examples of the onscreen
menus are shown on the next page. Detailed explanations on using each menu follow later in
this guide. For information about the interactive plug-in Menu, see pages 21 - 23.
The Onscreen Menu System
To open the onscreen menu system, press the MENU button on the remote control. You
navigate within the onscreen menus by using the four directional arrow buttons on the remote
control. (These buttons are also the CH +/– and VOL +/– buttons. Channel and volume functions
will not operate when the onscreen menu is active).
The selected feature and option on a menu screen are highlighted in a different color.
Selected Option
(Green)
ENG. FRAN. ESP.
LANGUAGE
Selected Option
(Blue)
CLOSED CAPTION
To move to a different feature use the π† arrows to move up or down the list. When you
press the up arrow at the top of the list or the down arrow at the bottom, the next menu screen
will appear. Use the arrows √ ® to select an option from the highlighted feature. Pressing
MENU on the remote control will close the onscreen menu system and return you to normal
television viewing.
Each menu and its features will be discussed in the following pages of this guide.
Notes:
• If you do not press any buttons for a few seconds, the onscreen menu will automatically
shut off.
• Button names in this guide are shown in SMALL CAPITAL LETTERS.
• Menus may appear in different sizes onscreen depending on the aspect ratio selected.
• Some menu items may not appear in menu screens when certain aspect ratios or inputs
are selected.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
Press the MENU button
INITIAL SETUP
INITIAL SETUP
PREVIOUS
PREVIOUS
LANGUAGE
ENG. FRAN. ESP.
AUTO TUNER SETUP
CHANNEL SUMMARY
V-CHIP
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
OFF
ON
SET LOCK CODE
OFF
AUTO DEMO
NEXT PAGE
(3/4)
NEXT PAGE
(4/4)
MENU
MENU
SELECT OPERATE
EXIT
SELECT OPERATE
EXIT
INITIAL SETUP 03
INITIAL SETUP 04
Notes:
INITIAL SETUP
PICTURE ADJUST
PREVIOUS
PREVIOUS
STANDARD
• The DIGITAL-IN
menu can only
be displayed
when a 480p
picture signal
is input to
NOISE MUTING
ON
TINT
00
00
00
00
00
FRONT PANEL LOCK
V1 SMART INPUT
OFF
ON
COLOR
PICTURE
BRIGHT
DETAIL
VIDEO INPUT LABEL
POSITION ADJUSTMENT
POWER INDICATOR
OFF
ENERGY SAVER MODE
NEXT PAGE
NEXT PAGE
(2/4)
(1/2)
EXIT
the digital-in
MENU
SELECT OPERATE
EXIT
MENU
SELECT OPERATE
terminal and the
picture is being
displayed on
the screen.
INITIAL SETUP 02
PICTURE ADJUST 01
• When the Menu
button on the
TV side panel
is pressed, the
FRONT PANEL
CONTROL
menu between
INITIAL
SETUP 04
INITIAL SETUP
PICTURE ADJUST
PREVIOUS
DIGITAL-IN
PREVIOUS
STANDARD
SIZE1
COLOR TEMPERATURE
DIG. NOISE CLEAR
NATURAL CINEMA
COLOR MANAGEMENT
DYNAMIC GAMMA
RESET
LOW
DIGITAL
DIGITAL-IN AUDIO
OFF
AUTO
OFF
OFF
NEXT PAGE
(1/4)
NEXT PAGE
(2/2)
MENU
SELECT OPERATE
EXIT
MENU
SELECT OPERATE
EXIT
and PICTURE
ADJUST will
appear.
INITIAL SETUP 01
PICTURE ADJUST 02
/
CLOCK TIMERS
PREVIOUS
SET CLOCK
SOUND ADJUST
PREVIOUS
BASS
00
00
00
/
ON OFF TIMER
TREBLE
BALANCE
MTS
STEREO SAP MONO
RESET
NEXT PAGE
NEXT PAGE
MENU
SELECT OPERATE
EXIT
MENU
SELECT OPERATE
EXIT
CLOCK/TIMERS
SOUND ADJUST
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Auto Tuner Setup
The auto tuner setup function is described on page 23 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the MENU button
AUTO TUNER SETUP
π†
è
è
To AUTO TUNER SETUP
To operate
TUNER MODE
CABLE
To choose CABLE or AIR
Press the OK button to start
OK
PRESS TO START
MENU
SELECT OPERATE
EXIT
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Press the Menu button when finished
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or set the channel label as you like or prevent any
unauthorized viewers from watching any or all 181 channels.
Press the MENU button
CHANNEL SUMMARY
π†
To CHANNEL SUMMARY
To operate
CHNO. SCAN
ID
CHNO. SCAN
ID
01
06
HBO
è
02
03
04
05
MTV
07
08
09
10
L
The Channel summary screen will now be displayed with
the channels set to scan marked with an “√”. You can
delete channels from the scan by removing the “√”. If any
channels were missed during auto tuner setup and you
wish to add them, you may by placing an “√” next to the
channel number.
A&E
E!
OK
MENU
SELECT
OPERATE
EXIT
π†√® To the SCAN column
Press the OK button to include or delete from scan
Press the MENU button when finished
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
How to set the channel label.
Press the MENU button
ID
π†
è
π†
To CHANNEL SUMMARY
To operate
To the ID column
CHANNEL 09
RESET
Press the OK button to enter
OK
PRESS TO FINISH
è
π†
To select the character you want
To move to the next space
MENU
SELECT OPERATE
EXIT
...continue to follow these directions for all four
spaces
Press the OK button to finish
Your characters are now set
Press the MENU button when finished
If you want to reset the characters you set:
Press the MENU button
π†
è
π†
To CHANNEL SUMMARY
To enter
To the ID column
Press the OK button to enter
To select RESET
π†
Press the OK button to finish
Your characters are now reset
Notes:
• You can use characters for: Alphabet, numbers, marks and spaces.
• It is possible to set the maximum of 40 channel labels.
• If you try to set more than the 40 maximum, the message "MEMORY OVERFLOW" will
appear.
You can block access to a channel by activating the channel lock.
Press the MENU button
π†
To CHANNEL SUMMARY
To operate
è
π†√® To the Lock Column (
)
Press the ZERO button to lock or unlock that channel
Press the MENU button when finished
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Channel Guard Message
When a viewer attempts to watch a guarded channel, the following message appears:
To watch a channel that you have locked, enter the
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
Lock Code using the 10 key pad.
If the wrong code is entered, the message
“INVALID LOCK CODE!” will flash on the screen.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
The channel cannot be accessed until the correct code
is entered.
NO. - - - -
Notes:
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.
• See also “Set Lock Code”, page 39.
V-Chip
Your TV is equipped with V-Chip technology which enables you to block channels or content
that you feel to be inappropriate for children, based on US and Canada rating guidelines.
V-Chip has no effect on video signals from DVD discs or Camcorder connection.
Note: Some programs, and movies are broadcast without a ratings signal. Even if you set
up V-CHIP ratings limits, these programs will not be blocked. See page 34 for information on
how to block unrated programs.
Note (for Canadian viewers): The V-Chip function is based on specifications designed for
the United States and therefore may not work properly in Canada.
You can customize the V-Chip settings of your television to match your personal tastes. The
V-Chip menu below is the starting point for your V-Chip settings
You can use US V-Chip settings (for programming broadcast from the United States), Canadian
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use
any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting
each of the three V-Chip formats appear in the next six pages along with descriptions of the
rating categories.
To access the rating categories:
Press the MENU button
V-CHIP
V-CHIP
OFF
π†
è
To V-CHIP
To operate (Lock icon
SET US TV RATINGS
SET MOVIE RATINGS
SET CANADIAN RATINGS ENG
SET CANADIAN RATINGS FRE
UNRATED
will appear)
Press ZERO to access the V-Chip menu
VIEW
è
To turn V-Chip ON or OFF (V-Chip must be
turned ON for rating settings to operate)
π†
To move to SET US TV RATINGS,
SET MOVIE RATINGS, or
MENU
SELECT OPERATE
EXIT
SET CANADIAN RATINGS (see following
pages for descriptions of each item)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Unrated Programs
Unrated programming refers to any programming which does not contain a rating signal.
Programming on television stations which do not broadcast rating signals will be placed in the
“Unrated Programming” category.
Examples of Unrated programs:
• Emergency Bulletins
• News
• Public Service Announcements
• Sports
• Locally Originated Programming
• Political Programs
• Religious Programs
• Weather
• Some Commercials
Note:
• TV programs or movies that do not have rating signals will be blocked if the unrated category
is set to BLOCK.
Directions to Block Unrated Programs
You can block programs that are not rated.
Press the MENU button
V-CHIP
OFF
V-CHIP
π†
To V-CHIP
SET US TV RATINGS
SET MOVIE RATINGS
SET CANADIAN RATINGS ENG
SET CANADIAN RATINGS FRE
UNRATED
è
To operate (The lock icon
appears)
Press ZERO to access V-Chip setup options
VIEW
π†
To UNRATED
è
To VIEW or BLOCK
MENU
SELECT OPERATE
EXIT
Press MENU when done
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
US V-Chip Ratings
U.S. PARENTAL RATING SYSTEMS
Programs with the following ratings are appropriate for children.
❏ TV Y is Appropriate for All Children
Programs are created for very young viewers and should be suitable for all ages, including
children ages 2 - 6.
❏ TV Y7 is for Older Children
Most parents would find such programs suitable for children 7 and above. These programs
may contain some mild fantasy violence or comedic violence, which children should be able
to discern from reality.
Programs with the following ratings are designed for the entire audience.
❏ TV G stands for General Audience
Most parents would find these programs suitable for all age groups. They contain little or no
violence, no strong language, and little or no sexual dialog or situations.
❏ TV PG Parental Guidance Suggested
May contain some, but not much, strong language, limited violence, and some suggestive
sexual dialog or situations. It is recommended that parents watch these programs first, or
with their children.
❏ TV 14 Parents Strongly Cautioned
Programs contain some material that may be unsuitable for children under the age of 14
including possible intense violence, sexual situations, strong coarse language, or intensely
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.
❏ TV MA Mature Audiences Only
These programs are specifically for adults and may be unsuitable for anyone under 17
years of age. TV MA programs may have extensive V, S, L, or D.
Viewing Guidelines
In addition to the ratings categories explained above, information on specific kinds of content
are also supplied with the V-Chip rating. These types of content may also be blocked. The
content types are:
• V/FV is for VIOLENCE/FANTASY VIOLENCE
• S stands for SEXUAL CONTENT
• L stands for strong LANGUAGE
• D stands for suggestive DIALOG
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Setting US V-Chip Ratings
Press the MENU button
V-CHIP
V-CHIP
OFF
π†
è
To V-CHIP
SET US TV RATINGS
SET MOVIE RATINGS
SET CANADIAN RATINGS ENG
SET CANADIAN RATINGS FRE
UNRATED
To operate (lock icon
appears)
Press ZERO to access the V-Chip menu
VIEW
è
π†
è
To turn V-Chip ON or OFF
To move to SET US TV RATINGS
To operate
MENU
SELECT OPERATE
EXIT
Directions to set US V-Chip Ratings
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and
press the π† or √® to move the cursor to the correct location. Press OK to turn the locking
feature on or off. An item is locked if the
icon appears instead of a “—”.
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that
column and add a lock icon. Once you’ve put a lock on the top row, everything in that column
is automatically locked.
SET US TV RATINGS
π†√® To the TV 14 Column
TV TV
MA 14
TV
PG
TV
G
TV
Y7
TV
Y
Press the OK button to lock
Press the MENU button when finished
V/FV
S
L
Note:
D
• If you want to change the setup, move the cursor to
the top column and change the lock icon to “—” by
pressing OK again. You may then select individual
categories to block.
OK
MENU
EXIT
SELECT
OPERATE
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Movies Ratings
❒ NR – Not Rated
This is a film which has no rating. In many cases these films were imported from countries
which do not use the MPAA ratings system. Other NR films may be from amateur producers
who didn’t intend to have their film widely released.
NR (Not Rated) Programming may contain all types of programming including children’s
programming, foreign programs, or adult material.
❒ G – General Audience
In the opinion of the review board, these films contain nothing in the way of sexual content,
violence, or language that would be unsuitable for audiences of any age.
❒ PG – Parental Guidance
Parental Guidance means the movie may contain some contents such as mild violence,
some brief nudity, and strong language. The contents are not deemed intense.
❒ PG-13 – Parents Strongly Cautioned
Parents with children under 13 are cautioned that the content of movies with this rating may
include more explicit sexual, language, and violence content than movies rated PG.
❒ R – Restricted
These films contain material that is explicit in nature and is not recommended for
unsupervised children under the age of 17.
❒ NC-17 – No One Under 17
These movies contain content which most parents would feel is too adult for their children
to view. Content can consist of strong language, nudity, violence, and suggestive or explicit
subject matter.
❒ X – No One under 18
Inappropriate material for anyone under 18.
Directions to set Movie (MPAA) Ratings
Press the MENU button
π†
è
To V-CHIP
To operate (Lock icon
appears)
Press ZERO to access V-Chip setup options
π†
è
To SET MOVIE RATINGS
To enter movies menu
For example:
To block viewing of X and NC-17 rated from shows:
SET MOVIE RATINGS
π†√® To the X Column
Press the OK button to lock
π†√® To the NC-17 Column
Press the OK button to lock
Press the MENU button to finish
N
P
G13
X
C17
R
PG
G
NR
OK
MENU
EXIT
SELECT
OPERATE
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Canadian V-Chip Ratings
❒ E – Exempt
Exempt programming includes: news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
❒ C – Programming Intended for Children
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or
unrealistic in nature.
❒ C8+ – Programming Intended for Children 8 and Over
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low
intensity and will show the consequences of the acts. There will be no offensive language,
nudity or sexual content.
❒ G – General Audience
Programming will contain little violence and will be sensitive to themes which could affect
younger children.
❒ PG – Parental Guidance
Programming intended for a general audience, but which may not be suitable for younger
children. Parents may consider some content not appropriate for children aged 8-13.
❒ 14+ – 14 Years and Older
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and
early teens. Programming may contain mature themes and scenes of intense violence.
❒ 18+ – Adult
Material intended for mature audiences only.
Directions to set Canadian V-Chip Ratings
Press the MENU button
π†
è
To V-CHIP
To operate (lock icon
appears)
Press ZERO to access V-Chip setup options
π†
è
To SET CANADIAN RATINGS ENG (for English)
To enter ratings menu
For example:
To block viewing of programming rated 14+ and
18+:
SET CANADIAN RATINGS ENG
è
To the 18+ Column
Press the OK button to lock
P
C
8
G
C
18+
14+
G
è
To the 14+ Column
Press the OK button to lock
Press the MENU button to finish
MENU
OK
EXIT
SELECT
OPERATE
Note:
• For instructions on “SET CANADIAN RATINGS FRE (in French)”, please see page 38 in the
French side of this user’s guide.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Set Lock Code
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes
preset with a lock code of “0000”. You may change the code to any four-digit number you wish.
To change the lock code, follow the steps below.
Press the MENU button
SET LOCK CODE
π†
To SET LOCK CODE
To operate (lock icon
LOCK CODE
0000
è
appears)
Press ZERO to access the lock code
The first digit will be highlighted
OK
PRESS
TO FINISH
MENU
SELECT OPERATE
EXIT
è
π†
To select the number
To move to the next digit
Continue to follow these directions for all four numbers
Press the OK button to finish (your lock code is now set)
Press the Menu button when finished
When a viewer attempts to watch a blocked channel, this message appears:
THIS PROGRAMMING EXCEEDS
YOUR RATING LIMITS.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. - - - -
The channel will remain blocked until the correct lock code is entered (see above for
information on setting your lock code).
Notes:
• After a power interruption you must reset the lock code.
• Write your lock code number down and keep it hidden from potential viewers.
• If you forget the lock code, a new code may be set using the steps listed above.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Auto Demo
This function lets you preview the Dynamic Gamma demo.
Press the MENU button
INITIAL SETUP
PREVIOUS
π† To AUTO DEMO
AUTO TUNER SETUP
CHANNEL SUMMARY
V-CHIP
è
To turn AUTO DEMO ON or OFF
SET LOCK CODE
AUTO DEMO
Note:
OFF
• To stop auto demo, press the BACK button.
NEXT PAGE
(4/4)
MENU
SELECT OPERATE
EXIT
Language
The language function is described on page 21 as the interactive plug-in menu. If you need to
choose the language again, follow the steps below.
Press the Menu button
INITIAL SETUP
PREVIOUS
π†
To LANGUAGE
LANGUAGE
ENG. FRAN. ESP.
è
To choose a language: ENG. (English),
FRAN. (French) or ESP. (Spanish)
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
OFF
ON
Press the MENU button when finished
NEXT PAGE
(3/4)
MENU
SELECT OPERATE
EXIT
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Closed Caption
Many broadcasts now include an onscreen display of dialog called closed captions. Some
broadcasts may also include displays of additional information in text form. Your television can
access and display this information using the closed caption feature. To activate the closed
caption feature, follow the steps below.
Press the MENU button
CLOSED CAPTION
π†
è
è
π†
è
To CLOSED CAPTION
To operate
MODE
TEXT
CC1
T1
CAPTION
TEXT
To select CAPTION or TEXT in MODE
To select CAPTION or TEXT
To select a caption (CC1 to CC4) or text
channel (T1 to T4)
OK
PRESS TO FINISH
MENU
SELECT OPERATE
EXIT
Press the OK button to save
Press the MENU button when finished
Notes:
• Closed caption subtitles are usually found on closed caption channel CC1. Some programs
may include additional text information which is usually found on text channel T1. The other
channels are available for future use.
• Closed captioning may not work correctly if the signal being received is weak or if you are
playing a video tape.
• Most broadcasts containing closed captioning will display a notice at the start of the program.
• To select the mode, press the C.C. button. See page 57.
Auto Shut Off
This function automatically shuts off your TV when there is no signal from the channel the
TV is on.
INITIAL SETUP
Press the MENU button
PREVIOUS
LANGUAGE
ENG. FRAN. ESP.
π†
è
To AUTO SHUT OFF
To turn ON or OFF
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
OFF
ON
Press the MENU button when finished
• If the channel that you have on does not receive a
signal for more than one minute, the blinking text
“NOT RECEIVING A SIGNAL AUTO SHUT OFF
IN 9 MIN.” appears on the screen, and starts the
countdown. If no signal is being received within 10
minutes, the TV shuts itself off.
NEXT PAGE
(3/4)
MENU
SELECT OPERATE
EXIT
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
XDS ID
XDS ID Display provides a channel’s call letters, the network’s name, and even a program
name. The XDS ID information is provided by the broadcaster.
INITIAL SETUP
Press the MENU button
PREVIOUS
LANGUAGE
ENG. FRAN. ESP.
π†
è
To XDS ID
To turn ON or OFF
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
OFF
ON
Press the MENU button when finished
NEXT PAGE
(3/4)
MENU
SELECT OPERATE
EXIT
Noise Muting
This feature inserts a blank gray screen over channels which are not broadcasting or are too
weak to be received clearly.
Press the MENU button
INITIAL SETUP
PREVIOUS
π†
è
To NOISE MUTING
To turn noise muting ON or OFF
NOISE MUTING
ON
OFF
ON
FRONT PANEL LOCK
V1 SMART INPUT
VIDEO INPUT LABEL
POSITION ADJUSTMENT
POWER INDICATOR
Press the MENU button when finished
OFF
NEXT PAGE
(2/4)
MENU
Note:
SELECT OPERATE
EXIT
• Noise muting will not work during auto tuner setup or
when you operate channel summary.
Front Panel Lock
This allows you to lock the keys on the front of the TV, so that a child may not accidentally
change your viewing preferences.
Press the MENU button
INITIAL SETUP
PREVIOUS
π†
è
To FRONT PANEL LOCK
To turn ON or OFF
NOISE MUTING
ON
OFF
ON
FRONT PANEL LOCK
V1 SMART INPUT
Press the MENU button when finished
VIDEO INPUT LABEL
POSITION ADJUSTMENT
POWER INDICATOR
You can turn off this feature in the following ways:
OFF
(2/4)
NEXT PAGE
• Unplug the power cord, and plug it back in. Do this if
your batteries die, or you lose your remote control.
MENU
SELECT OPERATE
EXIT
• Use the remote control.
• Press the MENU button on the front of the TV for more than 3 seconds. In this case, the OSD
for FRONT PANEL LOCK will appear.
Note:
• To turn ON/OFF the TV, press the power button for more than 3 seconds. This feature will
remain ON.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
V1 Smart Input
This feature is used if you have connected an AV Receiver to your television. By turning this
feature on, your television can automatically detect the signal source from your components
that are connected to your AV Receiver.
Press the MENU button
INITIAL SETUP
PREVIOUS
π†
è
To V1 SMART INPUT
To turn ON or OFF
NOISE MUTING
ON
OFF
ON
FRONT PANEL LOCK
V1 SMART INPUT
Press the MENU button when finished
VIDEO INPUT LABEL
POSITION ADJUSTMENT
POWER INDICATOR
Notes:
OFF
NEXT PAGE
(2/4)
• If you do not have an AV Receiver connected to your
television, turn this feature OFF. By doing so, you can
take advantage of using AV CompuLink components
with your television.
MENU
SELECT OPERATE
EXIT
• Some AV Receivers may not work with this function.
Video Input Label
This function is used to label video input connections for the onscreen displays.
Press the MENU button
INITIAL SETUP
PREVIOUS
π†
è
π†
è
To VIDEO INPUT LABEL
To operate
NOISE MUTING
ON
FRONT PANEL LOCK
V1 SMART INPUT
VIDEO INPUT LABEL
POSITION ADJUSTMENT
POWER INDICATOR
OFF
ON
To select the desired video input
OFF
To select the desired preset input label (see
chart below)
NEXT PAGE
(2/4)
MENU
SELECT OPERATE
EXIT
Press the OK button to save
VIDEO INPUT LABEL
Press the MENU button when finished
VCR
VIDEO-1
VIDEO-2
VIDEO-3
DIGITAL-IN
DVD
SAT
STB
OK
PRESS TO FINISH
MENU
SELECT OPERATE
EXIT
Preset
Labels
Select when...
You have a VCR connected to the video input
You have a DVD connected to the video input
VCR
DVD
DVHS
STB
You have a Digital VCR connected to the video input
You have a Set-top Box connected to the video input
You have a Satellite Receiver connected to the video input
You have an Amplifier connected to the video input
You have a Video Game connected to the video input
You have a Video Camera connected to the video input
You have a Video Disc player connected to the video input
SAT
AMP
GAME
CAM
DISC
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Position Adjustment
Position adjustment allows you to adjust the position of the picture on the screen vertically
when the aspect is set to panorama, cinema, or full.
Press the MENU button
π†
è
To POSITION ADJUSTMENT
To enter
π†√® To adjust the position
Press the MENU button to finish
Notes:
OK
MENU
RESET
EXIT
OPERATE
• To reset the adjustment to the center, press the
OK button.
• When the arrow disappears, while you are adjusting the position, the position is at it’s
maximum limit.
• If you select regular size with aspect or Multi Screen, position adjustment option is not seen.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position vertically and horizontally when
the aspect is set HD panorama or cinema zoom for 1080i and 720p signals.
Power Indicator
Power indicator allows you to adjust the brightness of the power indicator
Press the MENU button
INITIAL SETUP
PREVIOUS
NOISE MUTING
ON
OFF
ON
π† To POWER INDICATOR
FRONT PANEL LOCK
V1 SMART INPUT
è
To adjust POWER INDICATOR LOW, HIGH
or OFF
VIDEO INPUT LABEL
POSITION ADJUSTMENT
POWER INDICATOR
Notes :
OFF
• When OFF is selected :
NEXT PAGE
(2/4)
The LED disappears if you have a TV signal.
The LED is lit as “LOW” when there is no TV
signal.
MENU
SELECT OPERATE
EXIT
• When the On Timer turns ON, the LED is lit as "LOW" when you turn the power off.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Digital-In
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a HDMI480p
picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when
a HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of
HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the
position can be adjusted by selecting either SIZE1 or SIZE2.
Press the MENU button
INITIAL SETUP
PREVIOUS
SIZE1
DIGITAL-IN
π† To DIGITAL-IN
DIGITAL
DIGITAL-IN AUDIO
è To enter
è To select SIZE1 or SIZE2
Press the MENU button to finish
NEXT PAGE
(1/4)
MENU
SELECT OPERATE
EXIT
Note:
• The DIGITAL-IN menu can only be displayed when a HDMI or DVI 480p picture signal is
input to the Digital-In terminal and the picture is being displayed on the screen.
Digital-In Audio
This feature is used if you have a DTV or HDMI
compatible component connected to your TV.
INITIAL SETUP
PREVIOUS
SIZE1
DIGITAL
DIGITAL-IN
Press the MENU button
DIGITAL-IN AUDIO
π†
To DIGITAL-IN AUDIO
è
To select “ANALOG” or “DIGITAL”
Press the Menu button when finished
NEXT PAGE
(1/4)
EXIT
MENU
SELECT OPERATE
Notes:
• If your DTV or HDMI component is capable of digital audio and video, choose DIGITAL. If
your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG.
• Refer to your DTV or HDMI component’s instruction manual for more information.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust
Picture Settings
These settings allow you to change and adjust the way the picture appears on your television.
TINT
Tint allows you to adjust the levels of red and green in your TV picture.
COLOR
The color function lets you make all the colors in the TV picture appear either more vivid or
subtle.
PICTURE
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker
or brighter picture overall.
BRIGHT
You can adjust the overall brightness of the TV picture with the Bright control.
DETAIL
The Detail feature adjusts the level of fine detail displayed in the picture.
ENERGY SAVER MODE
The energy saver mode adjusts the level of brightness on the TV screen.
Adjust the Picture Settings
Press the MENU button
PICTURE ADJUST
π†
To TINT, COLOR, PICTURE, BRIGHT,
DETAIL or ENERGY SAVER MODE
To enter
PREVIOUS
TINT
STANDARD
00
00
00
00
00
COLOR
PICTURE
BRIGHT
DETAIL
√ ®
+02
TINT
ENERGY SAVER MODE
NEXT PAGE
(1/2)
EXIT
√ ®
π†
To adjust the setting
To move to the next setting
MENU
SELECT OPERATE
Press the MENU button when finished
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust
Color Temperature
You can decide how strong or dull the colors appear on the TV screen.
Press the MENU button
PICTURE ADJUST
PREVIOUS
STANDARD
π†
è
To COLOR TEMPERATURE
To enter
COLOR TEMPERATURE
DIG. NOISE CLEAR
NATURAL CINEMA
COLOR MANAGEMENT
DYNAMIC GAMMA
RESET
LOW
OFF
COLOR TEMPERATURE LOW HIGH
AUTO
OFF
OFF
è
To set LOW or HIGH
Press the MENU button when finished
NEXT PAGE
(2/2)
MENU
SELECT OPERATE
EXIT
Digital Noise Clear
With digital noise clear, this helps take our static or noise from a channel that may not be
coming in clearly.
Press the MENU button
DIG. NOISE CLEAR
OFF
LOW
HIGH
π†
è
π†
To DIG. NOISE CLEAR
To enter
To select the mode “LOW”, “HIGH” or “OFF”
Press the MENU button when finished
Natural Cinema
Natural cinema corrects the problem of blurred edges which may occur when viewing a program
originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges
of these programs, choose NATURAL CINEMA and set it to AUTO. Natural Cinema helps correct
conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the
television rate of 30 frames-per-second.
NATURAL CINEMA
Press the MENU button
AUTO
π†
è
π†
To NATURAL CINEMA
To enter
To select the mode “AUTO", "ON" or "OFF”
ON
OFF
Press the MENU button when finished
Notes: The natural cinema mode is automatically set to “AUTO” in the following cases:
• Turning on or off
• Changing the channel or input mode
• Using multi-screen functions
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust
Color Management
This TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated
to produce natural hues.
Press the MENU button
COLOR MANAGEMENT
ON
π†
è
π†
To COLOR MANAGEMENT
To enter
To select the mode “ON" or "OFF"
OFF
Press the MENU button when finished
Dynamic Gamma
JVC's Dynamic Gamma Circuitry (DGC makes it easier to see dark areas when a picture has
many dark areas, and makes it easier to see the bright areas when a picture has many bright
areas. DGC is turned on, DGC analyzes and adjusts the total level of picture brightness
balance, especially in dark areas where the level of greyscale is often lost, turning completely
to black DGC automatically enhances the detail in these dark areas providing a more dynamic
image with finer detail, so the optimum picture settings are automatically set for each picture.
Normally use with DGC on.
Press the MENU button
DYNAMIC GAMMA
ON
π†
è
π†
To DYNAMIC GAMMA
To enter
To turn ON or OFF
OFF
Press the MENU button when finished
Reset
Reset resets all picture adjustments (tint, color, picture, bright, detail, color temperature, dig.
noise clear, Color Management and Dynamic Gamma) at once to the default settings.
Press the MENU button
PICTURE ADJUST
PREVIOUS
STANDARD
π†
è
To RESET
To enter
COLOR TEMPERATURE
DIG. NOISE CLEAR
NATURAL CINEMA
COLOR MANAGEMENT
DYNAMIC GAMMA
RESET
LOW
OFF
AUTO
OFF
The onscreen menu disappears for a moment,
and then the settings are reset to the default
setting for all the picture adjustments.
OFF
NEXT PAGE
(2/2)
Press the MENU button when finished
MENU
SELECT OPERATE
EXIT
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjust
Sound Settings
These settings allow you to change and adjust the sound on your television.
BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with
the bass adjustment.
TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio.
BALANCE – Adjust the level of sound between the TV’s left and right speakers with the
balance setting.
Adjust the Sound Settings
Press the MENU button
SOUND ADJUST
PREVIOUS
π†
√ ®
π†
To BASS, TREBLE or BALANCE
To adjust the setting
To move to the next setting
BASS
00
00
00
TREBLE
BALANCE
MTS
STEREO SAP MONO
Press the MENU button when finished
RESET
NEXT PAGE
MENU
SELECT OPERATE
EXIT
Note:
• You can reset the sound adjustments (BASS, TREBLE and BALANCE) you set at once as
the default setting when you select reset. See page 49.
• You can adjust BALANCE only when A.H.S. is off. See page 55.
MTS (Multi-Channel Television Sound)
MTS technology allows several audio signals to be broadcast at once, giving you a choice
in what you wish to hear with a TV program. In addition to mono or stereo sound, an
MTS broadcast may also include a second audio program (SAP).
Press the MENU button
SOUND ADJUST
PREVIOUS
π†
To MTS
BASS
00
00
00
è
Select the mode
TREBLE
BALANCE
MTS
(The ON AIR arrow tells you if a broadcast is in stereo
and/or contains an SAP).
STEREO SAP MONO
RESET
Press the MENU button when finished
NEXT PAGE
MENU
SELECT OPERATE
EXIT
Notes:
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
• MTS unavailable if your television’s input source is in input 1, 2, 3 or 4 mode, as described
on page 54.
Reset
Reset resets all Sound Adjustments (Bass, Treble and Balance) at once to the default settings.
See page 48 on how to use reset.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timers
Set Clock
The set clock function is described on page 22 as the interactive plug-in menu. You can choose
to set the clock automatically, or manually. If you need to set the clock again, follow the steps
below.
Press the MENU button
π†
To SET CLOCK
To operate
è
When you set the clock automatically, choose AUTO by pressing the
√
or
®
arrows.
π†
To TIME ZONE
SET CLOCK
è
To select your time zone
ATLANTIC
CENTRAL
EASTERN
HAWAII
MOUNTAIN
MODE
AUTO
ALASKA
PACIFIC
-- : -- --
TIME
TIME ZONE
D.S.T.
ATLANTIC
ON
π†
To D.S.T. (daylight savings time)
To turn D.S.T. ON or OFF
Press OK to finish
è
OK
PRESS TO FINISH
MENU
SELECT OPERATE
EXIT
Press the MENU button when finished
When you set the clock manually, choose MANUAL by pressing the
√
or
®
arrows.
π†
è
π†
è
To move to the hour
To set the hour
SET CLOCK
To move to minutes
To set the minutes
Press OK to start clock
MODE
MANUAL
-- : -- --
TIME
TIME ZONE
D.S.T.
ATLANTIC
ON
OK
PRESS TO START CLOCK
MENU
SELECT OPERATE
EXIT
THANK YOU !!
Press the MENU button when finished
Notes:
• D.S.T. can be used only for US and Canada when it is set to ON in the SET CLOCK menu.
• Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts
your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on
the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in
October.
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timers
On/Off Timer
The on/off timer lets you program your television to turn itself on or off. You can use it as an
alarm to wake up, to help you remember important programs, or as a decoy when you’re not
home.
Press the MENU button
ON/OFF TIMER
7:00 PM
10:00 PM
03
ON TIME
π†
è
è
To ON/OFF TIMER
OFF TIME
CHANNEL
ON VOLUME
MODE
To operate (begins with ON TIME)
CURRENT
EVERYDAY
NO
To set the hour (AM/PM) you want the TV to
turn on
ON/OFF TIMER
†
è
†
To move to minutes
To set the minutes
OK
PRESS TO FINISH
MENU
SELECT OPERATE
EXIT
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the
OFF TIME the same way as ON TIME
†
è
†
To accept OFF TIME and move to CHANNEL
To select channel
To ON VOLUME
è
†
To set the volume level
To move to MODE
è
Choose ONCE or EVERYDAY
†
To ON/OFF TIMER
è
Choose YES to accept the timer setting, choose NO if you don’t wish to accept
Press the OK button to finish
Press the MENU button to exit the menu
Notes:
• The on/off time cannot be set to locked or guarded channels.
• In order for the on/off timer to work, the clock must be set.
• After a power interruption, the timer settings must be reset.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Multi Screen Function
Your television has two kinds of screen: TWIN (2 channels) and INDEX (12 channels).
Note: After you press any multiscreen button, if you press the menu button, only the picture
adjust screen will appear.
Index
This allows you to quickly look at up to 12 channels at a time so that you can decide which one
to watch.
1
5
9
2
3
4
6
7
8
10
11
12
Notes:
• Only RF input signal will be displayed.
• You can watch the channel added in channel summary. See page 31.
Twin
Activate the split-screen option by pressing TWIN on
the remote control. The channel (or input) you were
watching before pressing TWIN will appear on the left,
07
V-1
the new channel will appear on the right. The sound
will continue to come from the main screen channel
MAIN SCREEN
PICTURE
SPLIT SCREEN
PICTURE
(or input). To turn split-screen off and return to
normal television viewing, press TWIN again or press
the BACK button.
Notes:
• Main Screen and Split Screen will not display the same channel or input at the same time.
• You can enter the TWIN mode when the screen is in NORMAL or INDEX mode.
• Split-screen functions will not work with locked channels or channels blocked by V-Chip
ratings limits. A gray screen will display instead.
• The aspect of MAIN CHANNEL PICTURE becomes 16:9 when you input the picture of
480p, 720p and 1080i from the component terminal.
• After you press the SELECT button, and select SPLIT SCREEN when you press the
OK button, select normal screen. If you don’t operate, the MAIN CHANNEL SCREEN will
be automatically selected about 8 seconds later.
• Aspect does not work in Twin mode.
• When you press the Menu button in Twin mode, it appears only as Picture Adjust menu.
• If the signal that you are watching is coming from the HDMI input, you can not enter the
TWIN mode.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Freeze
Pressing the FREEZE button causes the screen to change to the split-screen display with the still
picture displayed on the right. In order to return to the normal display, press the FREEZE button
once again.
Note: When the screen is in freeze mode, if you do not operate it within 15 minutes, this
function will cancel out.
Swap
You can exchange the channel (or input) displayed in the split screen window for the main
screen image by pressing the SWAP button.
Select
With SELECT, you can select the picture (channel) while viewing SPLIT screen. When you
press SELECT button, the channel number on the top will be highlighted. Each press of SELECT
will shift the channel.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Power
Turns the TV on or off.
Press the POWER button
Number Buttons - 10Key Pad
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
0 (Zero)
1 (One)
2 (Two)
Tune
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the TUNE button. For example, to move to channel 12:
1 (One)
2 (Two)
Press the TUNE button
Input
Selects the signal input source for the television: INPUT-1, 2, 3 or 4 for video devices like
VCRs, DVD players, or camcorders.
Press the INPUT button
Notes:
• When you return to TV mode, press the RETURN +/TV button or direct 10 key pad.
• You can also access the FRONT PANEL CONTROL screen by using the MENU button on
the side of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
INPUT by pressing MENU
†
on the side panel and choose a mode by using the CHANNEL +/-
buttons ( OPERATE ).
√
®
Channel +/–
Use these buttons to move up or down all the available channels your TV is able to receive.
Volume +/–
Use these buttons to raise or lower the TV’s volume level.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Return +
The RETURN+ button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels using the CH+ and CH– buttons.
RETURN+ and hold for three seconds
RETURN CHANNEL
PROGRAMMED!
The channel currently active has been programmed as your return+ channel. Now scan
through the channels using the CHANNEL+/– buttons.
RETURN+
You will return to your programmed channel.
• To cancel your return+ channel, press and hold the RETURN+ button for three seconds. The
message “RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with the Channel+/– buttons. Pressing any number key will cancel
return+.
Sound
By pressing the SOUND button, you can change the A.H.S. (Advanced Hyper Surround) mode,
BBE and A.H.B (Active Hyper Bass) on or off.
A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more
effect.
BBE - BBE High Definition Sound restores clarity and presence for better speech intelligibility
and musical realism.
A.H.B. - You can reinforce the bass sound to maintain rich, full bass at low volumes, and enjoy
a clear sound with boosted bass.
Press the SOUND button
SOUND EFFECT
A.H.S.
BBE
MOVIE MUSIC OFF
ON OFF
π†
è
To select A.H.S., BBE or A.H.B.
To choose the setting
Press the MENU when finished
A.H.B.
ON OFF
MENU
OPERATE
EXIT
SELECT
Note: Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound,
Inc. under USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered
trademarks of BBE Sound, Inc.
Muting
The MUTING button instantly turns the volume down completely when you press it. Press
MUTING and the volume level will instantly go to zero. To restore the volume to its previous
level, press MUTING again.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Video Status
The VIDEO STATUS button gives you a choice of four TV picture display settings, including a
display of your own preferences.
Standard - Resets the picture display to the factory settings.
VIDEO STATUS
Dynamic - Gives a vivid picture with better contrast when viewing in
STANDARD
a brightly lit room.
DYNAMIC
Theater - Gives a rich, film-like look to video when viewing in a
THEATER
dimly lit room.
GAME
Game - Used for when you are playing video games connected to
your TV.
Press the VIDEO STATUS button
By every press of the VIDEO STATUS button, you change the mode.
Note:
• You can also change the mode by pressing the π† buttons.
• You can also access the FRONT PANEL CONTROL screen by using the MENU button on
the side of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
VIDEO STATUS by pressing MENU
†
®
on the side panel and choose a mode by using the
).
CHANNEL +/- buttons ( OPERATE
√
TheaterPro D6500K
The TheaterPro D6500K color temperature technology function makes sure that the video you
watch is set to the standard color temperature, so that what you see is as true to what the film
to video editors intended it to be.
Press the THEATERPRO button
Sleep Timer
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals
of 15 minutes, for a total time of up to 180 minutes.
Press the SLEEP TIMER button
0 15 30 45 60 75 90 105 120 135 150 165 180
Sleep Timer Message
20 seconds before the automatic shutoff, this message will appear:
GOOD NIGHT!
PUSH SLEEP TIMER BUTTON
TO EXTEND.
You then have 20 seconds to press the SLEEP TIMER button to
delay the shut off for another 15 minutes.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Display
The display screen shows the current status of timers, inputs, and XDS ID.
Press the DISPLAY button
The screen to the right shows the following
information:
05 KLVX PBS
JAZZ FESTIVAL
• The current channel or AV input (Channel 05)
NOW
12:20 PM
OFF
• The current time (12:20 pm)
• Sleep timer status/minutes remaining (The
Sleep Timer is off)
SLEEP TIMER
ON/OFF TIMER
EVERYDAY
7:00 PM
ON TIME
• On/off timer status (Set to turn on everyday at
OFF TIME
10:00 PM
7:00 PM, off at 10:00 PM)
• Each Press of the DISPLAY button changes the
display mode:
Display
Time
Channel
Off
Display - Full screen shown above
Time - Shows the current time only
Channel - Shows the current channel
Off - Turns display off
Notes:
• You may also turn off the display at any step by pressing MENU.
• If the clock, sleep timer or on/off timer are not set, the display screen will show:
“CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.
C.C. (Closed Caption)
Use the C.C. (Closed Caption) button to select the mode of closed caption.
Press the C.C. button
OFF
SMART CAPTION
ON
• Smart Caption will appear when you press the MUTING button, only on channels where the
broadcast contains closed captioning.
• When you select ON, it will be the mode selected in the Closed Caption Menu.
• See page 41 when you set the caption/text mode.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Aspect
This feature will help you adjust the picture you are watching to give you the best possible
picture quality.
Aspect Ratios
PANORAMA - With this ratio a normal
4:3 aspect picture is stretched to fit the
dimensions of the 16:9 aspect screen.
REGULAR - The regular ratio is used
when you want to watch a 4:3 broadcast
or recorded program without modifying the
original picture to fit the dimensions of your
16:9 screen. The 4:3 picture will fill the
screen from top to bottom, while black bars
will appear to fill up the remaining space
along the picture’s sides. The 4:3 picture
will be centered within the boundaries of the
16:9 screen.
CINEMA - This ratio “zooms in” on the
center part of a 4:3 aspect picture, blowing
it up to fill the 16:9 screen.
CINEMA ZOOM - This ratio stretches
the High-Definition 16:9 aspect image to
eliminate the black surrounding bars.
FULL - This is the ratio to use when
watching 16:9 High-Definition broadcasts.
HD PANORAMA - This ratio stretches
the High-Definition 16:9 aspect image to
eliminate the black side bars.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Aspect Ratios (Continued)
Press the ASPECT button
• By pressing the ASPECT button, you can change the size.
When you change the aspect ratios, it is different from their broadcast or recorded program.
NTSC, 480i, 480p
HD (1080i, 720p)
ASPECT
HD PANORAMA
CINEMA ZOOM
FULL
ASPECT
PANORAMA
CINEMA
FULL
REGULAR
Notes:
• You can also choose the size by pressing the π† buttons.
• When you change the aspect ratio or signal, reset the picture position to center.
• You can also access the FRONT PANEL CONTROL screen by using the MENU button on
the side of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
ASPECT by pressing MENU
†
on the side panel and choose a mode by using the CHANNEL
+/- buttons (
√
OPERATE
®
).
Menu
The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate
the onscreen menu system.
• See individual topics like “Sound Adjust” for specific information on using menus.
OK
This button confirms your selection when you are in one of the onscreen menus.
Back
This button allows you to go back in the menu to change a selection or correct a mistake.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
TV/CATV Slide Switch
Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to
operate the television’s built-in tuner. Move the switch to CATV to operate a cable box.
Note:
• See page 24 for information on programming your remote for cable box operation.
VCR/DVD Slide Switch
You can control a VCR or DVD player with the buttons on the lower part of the remote control.
Move the slide switch to VCR or DVD to operate.
Notes:
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other
manufacturer’s brand VCR, please see the code chart and instructions on page 25.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 26.
VCR Buttons
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and
power off.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other
manufacturer’s brand VCR, please see the code chart and instructions on page 25.
DVD Buttons
You can also use this remote control to operate the basic functions of your DVD player. These
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,
power on, and power off.
Move the selector switch to DVD to operate.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 26.
Light
Your remote control includes illuminated buttons for key features like Channel +/– and Volume
+/–. Press the LIGHT button to turn the illumination on for 4 seconds.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
No Program
If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM"
appears on the television screen. It appears when that channel is not receiving a signal and you
have the Noise Muting function OFF and you have a single screen. It moves automatically every
two seconds.
Note:
• Even if "NO PROGRAM" appears on the screen, your timer functions and auto shut off
functions that you set, are still active.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
PROBLEMS
CHECK
There is no power
• See if the power cord became unplugged.
• Check for a blown fuse or circuit breaker or a power outage.
There is no picture
or sound
• The antenna could be disconnected.
• The input mode could be set improperly. See page 54.
• The tuner (Auto Tuner Setup) could be set improperly. See page 31.
• The TV station may be having difficulties. Check to see if other stations are working.
Remote control is not • Check to see that the batteries are still working and properly installed.
operating properly or • Make sure the remote has a clear sight path to the TV.
at all
• Check that the TV/CATV switch is in the proper position.
• You may be too far from the TV. You must be within 23 feet (7 meters).
You cannot select a
certain channel
• Make sure the channels have been programmed. See "Channel Summary", page 31.
• Check to see if the channel is locked. See "Channel Summary - Lock" page 32.
The power turns off
by itself
• Make sure the set did not become unplugged.
• Perhaps the On/Off Timer is set. See page 51.
• Check to see if the Sleep Timer was set. See page 56.
The clock is wrong
• The power was interrupted and the clock was not reset. See page 50.
The color quality
is poor
• Tint and Color may be improperly adjusted. See page 46.
• The Video Status mode may be turned to the wrong setting. See page 56.
There are lines
across the picture
• There could be interference from another electrical appliance, such as a computer,
another TV or VCR. Move any such appliances further away from the TV.
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference.
The picture is spotted
There are double
pictures (ghosts)
• A building or passing airplane can reflect the original signal and produce a second,
slightly delayed one. Adjust your antenna position.
Picture is snowy
(image noise)
• Your antenna may be damaged, disconnected or turned. Check the antenna
connection. If the antenna is damaged, replace it.
Screen is 40% black
• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 41.
• Make sure the MTS settings are correct. See "MTS" on page 49.
Stereo or bilingual
programs can't be
heard
Static electricity
• It is normal to feel static electricity if you brush or touch the screen.
You hear occasional
crackling sounds
• It is normal for the TV to make crackling sounds when first turned on or off. Unless
the sound or picture become abnormal, this is fine.
The AUTO DEMO
• The On Timer that you programmed has started.
finished automatically • The channel that the AUTO DEMO is using is a channel that is blocked by V-Chip.
• The Auto Shut Off that you programed has occured.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model
LT-26X576
LT-32X576
Type
LCD Flat Television
NTSC, BTSC System (Multi-Channel Sound)
HDTV digital broadcast ready
Reception Format
Reception Range
VHF 2 to 13, UHF 14 to 69 Sub, Mid, Super, Hyper and Ultra bands
(180 channel frequency synthesizer system)
Power Source
AC 120V, 60 Hz
Power Consumption
Screen Size
152W
195W
26 inch / 65 cm
measured diagonally,
16:9 ratio
32 inch / 80 cm
measured diagonally,
16:9 ratio
Speakers
6.6 cm round X 2
Audio Output
Full Range - 10W + 10W
Antenna Terminal
75 ohms (VHF/UHF) (F-type connector)
Video: 1 Vp-p, 75 ohms
Audio: 500 mVrms (-4dBs) high impedance
External Input Jacks
Y: 1Vp-p positive, 75 ohms (negative sync provided)
Pb/Pr: 0.7 Vp-p 75 ohms
Conponent Input
Jack
Y: 1Vp-p positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
S-Video Input Jacks
Audio Output Jacks
(FIX)
FIX: 500mVrms (-4dBs) Low impedance (1000 Hz when modulated 100%)
Digital–In
HDMI jack x 1
Note: The Digital–In terminal is not compatible with picture signals of a
personal computer
Headphone Jack
Ø 3.5 mm X 1
Dimensions (in)
W x H x D (cm)
27 3/4 x 21 7/8 x 12 1/4
70.3 x 55.6 x 30.8
32 7/8 x 25 x 12 1/4
83.4 x 63.2 x 30.8
27 3/4 x 19 3/8 x 4 1/4 (TV ONLY)
70.3 x 49.1 x 10.7 (TV ONLY)
32 7/8 x 22 3/8 x 4 1/4 (TV ONLY)
83.4 x 56.8 x 10.8 (TV ONLY)
Weight (lbs / kg)
42.5 / 19.3
51.3 / 23.3
34.8 / 15.8 (TV ONLY)
43.6 / 19.8 (TV ONLY)
Accessories
Illuminated remote control unit / AA batteries X 2
Specifications subject to change without notice.
Note:
• Reception of channel A-5 ("95" of the TV set's on-screen cable channel numbers) is not
recommended for your TV set.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
67
Download from Www.Somanuals.com. All Manuals Search And Download.
JVC COMPANY OF AMERICA
Division of JVC Americas Corp.
1700 Valley Road
JVC CANADA, INC.
21 Finchdene Square
Scarborough, Ontario
Canada, M1X 1A7
Wayne, New Jersey, 07470
Download from Www.Somanuals.com. All Manuals Search And Download.
|