JVC Flat Panel Television 0509GLT NF MT User Manual

ENGLISH  
WIDE LCD PANEL TV  
INSTRUCTIONS  
Contents  
PREPARATION  
Safety precautions............................... 2  
Remote control buttons and functions... 3  
Set up and connections....................... 4  
Initial settings....................................... 6  
Registering / Editing channels............. 6  
FUNCTIONS  
Picture setting...................................... 7  
Sound setting ...................................... 9  
Useful functions................................. 10  
Viewing Teletext................................. 12  
Watching Video or DVDs................... 12  
Conguring your remote control........ 13  
REFERENCE  
Troubleshooting................................. 15  
Technical information......................... 16  
CH/CC List......................................... 18  
Specication...................................... 19  
LT-42Z49  
GGT0312-001A-H  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control buttons and functions  
Turn the TV on from standby  
Display on-screen menu  
Operate the menu  
“AAA/R03” Batteries  
• Insert the batteries  
Use two “AAA/R03” dry cell batteries. Insert the  
batteries from the · end, making sure the ·  
and ª polarities are correct.  
To previous screen  
WARNING:  
If this symbol is shown,  
Batteries shall not be exposed  
it is only valid in the  
Turn on “Clear SD”  
to excessive heat such as direct  
European Union.  
sunshine, re or the like.  
Colour button  
Switch between “TV, STB, BD/DVD, AUDIO”  
Select TV or Video input  
Channel information,  
Turn the Volume off/on  
Adjust the volume, Turn off muting  
Turn on “Sound Meister”  
Change channel/page  
To Teletext  
Turn the on-screen guide off / on. (While on-screen menu is displayed)  
Change the aspect ratio (P. 8)  
:OOM  
V-Scroll  
1. Select  
!UTO  
0ANORAMIC  
2EGULAR  
16:9 Zoom  
0ANORAMIC  
ꢀꢁꢂꢃ :OOM  
ꢀꢄꢂꢃ :OOM  
ꢀꢄꢂꢃ :OOM 3UBTITLE  
&ULL  
Move the picture with 5 or ∞  
while this bar is displayed.  
2. Set  
Functions for viewing Teletext  
Turn on “Eco Sensor”  
To operate your other devices  
Channel selection  
Select the desired channel number.  
For Hyper Scan  
PR changes without changing the picture. Once you  
stop pressing CHANNEL+ or CHANNEL - button,  
picture will change to the desired PR.  
Favourite channel setting. (P. 11)  
1. Register the favourite channel  
Press and hold  
Press number  
button (1-4 only)  
RETURN PLUS function  
Return to the frequently viewed channel.  
Set 1-4 ?  
Press and hold  
Return Plus  
Programmed!  
Choose the channel  
you want to  
programme  
will be displayed.  
Programmed!  
Press and hold  
2. Recall the favourite channel  
To cancel  
Return Plus  
Canceled!  
Press number  
button (1-4 only)  
Favourite 1-4 ?  
Press and hold  
Press  
RETURN function  
If you have not set or have cancelled the RETURN PLUS channel,  
this will return to the previously viewed channel.  
• If the favourite channel has not been registered then  
“No Memory” will be displayed.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set up and connections  
Connect an aerial and VCR / DVD Player  
Switch between TV / VIDEO  
devices  
Display on-screen menu / set  
TV/VIDEO  
MENU/OK  
AERIAL  
6)$%/ꢅꢆ  
2
,
6
Change channel / Page /  
Hyper Scan Function (P. 3)  
CHANNEL  
Power lamp  
ON : Lit (Blue)  
OFF: Unlit  
Volume / Adjust  
Power On / Off  
VOLUME  
Power lamp lights  
while the TV is on.  
• “Power Lamp” (P. 11)  
Remote control  
sensor / Eco Sensor  
To Headphone (P. 5)  
OR  
Care when setting  
Power requirements  
• Connect the power cord only to a 110-240V, 50/60Hz AC outlet.  
When attaching the TV to the wall, use the optional JVC wall  
VCR (DVD Player)  
• After all the connections have been made, insert the plug into an  
AC outlet.  
mounting unit  
Consult a qualied technician.  
JVC assumes no responsibility for damage due to improper mounting.  
LT-42Z49 : 400 mm x 200 mm mount which conforms to VESA standards.  
Stand Assembly  
- Insert the stand into the panel at the position where the screw  
holes are, and fasten the screws.  
Installation requirements  
To avoid overheating, ensure the unit has ample room.  
To prevent the TV from falling, thread  
the belt through the hole on the back of  
the stand and secure it to the TV rack.  
200mm  
Hole for belt  
(under the stand)  
Screw for attach  
the belt to the  
stand (provided)  
- If you have any problem with assembly, please contact a retailer or  
a dealership.  
Note: 4 screws included.  
150mm 50mm  
150mm  
50mm  
Screw (not provided)  
Belt (provided)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set up and connections (continued)  
You can connect many different devices to the rear panel of the TV.  
Please read the user manuals of each device before setup.  
(Connecting cables are not supplied with this TV.)  
VIDEO-1 Watching videos  
Output  
Input  
HDMITM Connector.  
Composite signal /  
Component signal  
(P. 16)  
Sound L / R  
• Use Component signal  
“Video - 1 Setting” (P. 12)  
HDMI-1  
HDMI-2  
HDMI-3  
Headphones  
DIGITAL VIDEO/AUDIO  
VIDEO-2 Watching videos  
To HDMI-1”  
To HDMI-3”  
Output  
Input  
• Composite signal  
• Sound L / R  
HD Video camera  
To HDMI-2”  
DVD player  
(HDMI compatible)  
Component input  
Composite input  
HDMI-1  
HDMI-2 Connecting HDMI devices  
HDMI-3  
DVD player  
(HDMI compatible)  
L
L
R
V
R
V
VIDEO-1  
VIDEO-1  
VCR / DVD recoder  
Pr  
Pb  
Y
Pr  
Pb  
Y
Output  
Input  
Amplier  
• HDMI signal (P. 19)  
(L)  
(R)  
Game  
Video  
• “HDMI Setting” (P. 12)  
• HDMI-2 and HDMI-3 inputs do not  
support analogue sound.  
• Connect a “DVI” device to  
“HDMI-1” (P. 16)  
• Please use a High Speed HDMITM  
Cable. High Speed HDMITM Cables  
are tested to carry an HD signal up  
to 1080p and higher.  
R
L
V
V
OUTPUT  
VIDEO-1  
L
L
R
VCR  
To Video-2  
DVD Player  
R
Pr  
Pb  
Y
Game consoles Video camera  
HDMI-1  
VIDEO-2  
PC  
R
L
V
( DVI ANALOG AUDIO )  
PC input line in  
OUTPUT  
PC AUDIO  
PC  
Video and sound signal of a TV  
channel you are viewing outputs  
from this terminal  
PC IN  
(D-SUB)  
Output  
• Composite signal  
• Sound L / R  
• Check for PC compatibility.  
“PC signals that can be displayed” (P. 16)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings  
Registering / Editing channels  
You can edit the channel list or register new channel manually.  
Display the  
menu bar  
Select  
“Set Up”  
Select  
“Edit / Manual”  
1. Select  
Turn on the TV  
1
• Show only when powering on  
for the rst time.  
• The power on the unit can  
also be used.  
%DIT  
)$  
1. Select  
Select a  
channel  
02  
ꢊꢀ  
ꢊꢆ  
ꢊꢈ  
ꢊꢁ  
ꢊꢉ  
ꢊꢄ  
ꢊꢌ  
ꢊꢍ  
ꢊꢃ  
ꢀꢊ  
#(ꢎ##  
#( ꢊꢆ  
#( ꢊꢈ  
#( ꢊꢌ  
#( ꢌꢄ  
#( ꢀꢆ  
#( ꢊꢃ  
#( ꢊꢉ  
#( ꢊꢆ  
#( ꢀꢉ  
#( ꢆꢍ  
2. Next  
2. Next  
JVC logo appears  
Select a language  
Move  
Move a channel position  
2
3
1. Start  
%DIT  
)$  
1. Select  
2. Set  
,ANGUAGE  
02  
ꢊꢀ  
ꢊꢆ  
ꢊꢈ  
ꢊꢁ  
ꢊꢉ  
ꢊꢄ  
ꢊꢌ  
ꢊꢍ  
ꢊꢃ  
ꢀꢊ  
#(ꢎ##  
#( ꢊꢆ  
#( ꢊꢈ  
#( ꢊꢌ  
#( ꢌꢄ  
#( ꢀꢆ  
#( ꢊꢃ  
#( ꢊꢉ  
#( ꢊꢆ  
#( ꢀꢉ  
#( ꢆꢍ  
%NGLISH  
®ÅËAšÈÌ×ÅA  
#ASTELLANO  
-ELAYU  
&RANÎAIS  
0YCCÅÃÄ  
2. Move  
ไทย  
Finish  
Tieáng Vieät  
Edit a channel name  
ID  
Select the Teletext language group  
%DIT  
1. Select character  
2. Move position  
02  
ꢊꢀ  
ꢊꢆ  
ꢊꢈ  
ꢊꢁ  
ꢊꢉ  
ꢊꢄ  
ꢊꢌ  
ꢊꢍ  
ꢊꢃ  
ꢀꢊ  
)$  
#(ꢎ##  
#( ꢊꢆ  
#( ꢊꢈ  
#( ꢊꢌ  
#( ꢌꢄ  
#( ꢀꢆ  
#( ꢊꢃ  
#( ꢊꢉ  
#( ꢊꢆ  
#( ꢀꢉ  
#( ꢆꢍ  
(Red)  
4ELETEXT ,ANGUAGE  
Select  
!
'ROUPꢅꢀ  
'ROUPꢅꢆ  
'ROUPꢅꢈ  
'ROUPꢅꢁ  
'ROUPꢅꢉ  
'ROUPꢅꢄ  
! " # $ %  
&
3. Set  
Insert / Delete a channel  
Insert/Delete  
• See “Language group for Teletext” (P. 16)  
Automatically register channels (Auto Program)  
1. Select a 2. Enter a  
%DIT  
02  
ꢊꢀ  
ꢊꢆ  
ꢊꢈ  
ꢊꢁ  
ꢊꢉ  
ꢊꢄ  
ꢊꢌ  
ꢊꢍ  
ꢊꢃ  
ꢀꢊ  
)$  
#(ꢎ##  
#( ꢊꢆ  
#( ꢊꢈ  
number 0-9  
CH/CC  
(Green)  
4
5
button, then  
receives the  
broadcast  
signal.  
#(  
ꢏꢏ  
! " # $ % &  
#( ꢌꢄ  
#( ꢀꢆ  
#( ꢊꢃ  
#( ꢊꢉ  
#( ꢊꢆ  
#( ꢀꢉ  
#( ꢆꢍ  
!UTO 0ROGRAM  
#( ꢊꢃ  
ꢀꢆꢋ  
(Yellow)  
• Delete a channel by press  
button.  
• “CH/CC List” (P. 18)  
Register a new channel  
Manual  
Check what was registered  
-ANUAL  
1. Beginning channel search  
(Red)  
02  
ꢊꢀ  
ꢊꢆ  
ꢊꢈ  
ꢊꢁ  
ꢊꢉ  
ꢊꢄ  
ꢊꢌ  
ꢊꢍ  
ꢊꢃ  
ꢀꢊ  
)$  
#(ꢎ##  
#( ꢊꢆ  
#( ꢊꢈ  
#( ꢊꢌ ꢐ"ꢎ'  
#( ꢌꢄ  
#( ꢀꢆ  
#( ꢊꢃ  
#( ꢊꢉ  
#( ꢊꢆ  
#( ꢀꢉ  
#( ꢆꢍ  
%DIT  
(Green)  
(Blue)  
02  
ꢊꢀ  
ꢊꢆ  
ꢊꢈ  
ꢊꢁ  
ꢊꢉ  
ꢊꢄ  
ꢊꢌ  
ꢊꢍ  
ꢊꢃ  
ꢀꢊ  
)$  
#(ꢎ##  
#( ꢊꢆ  
#( ꢊꢈ  
#( ꢊꢌ  
#( ꢌꢄ  
#( ꢀꢆ  
#( ꢊꢃ  
#( ꢊꢉ  
#( ꢊꢆ  
#( ꢀꢉ  
#( ꢆꢍ  
" " # ! " #  
! " # $ % &  
or  
From high From low  
frequencies frequencies  
2. Set  
(Yellow)  
(Blue)  
• If you want to edit channel, read  
the next column.  
• Channel ne tunning ➡  
• If the picture or sound is unnatural ➡  
/
to select a system. (P. 16)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture setting  
1. Display “Picture” menu  
2. Select item or setting  
To enter an items menu  
0ICTURE  
1. Select  
2. Enter  
1. Select  
1. Select  
0ICTURE  
0ICTURE -ODE  
"ACKLIGHT  
#ONTRAST  
"RIGHTNESS  
3HARPNESS  
#OLOUR  
"RIGHT  
2. Adjust  
3. Finish  
2. Enter  
4INT  
7HITE "ALANCE  
&EATURES  
#OOL  
You can select a preset picture setting according to your favour.  
Bright : Hightens contrast and sharpness.  
Game Mode : Adjusts picture setting when play the game.  
Picture Mode  
Soft  
: Softens contrast and sharpness.  
: Standardizes picture adjustment.  
Standard  
You can change the backlight brightness.  
Darker Brighter  
Backlight  
Contrast  
Brightness  
Sharpness  
Colour  
You can change the contrast of the picture.  
Lower Higher  
You can change the brightness of the picture.  
Darker Brighter  
You can change the sharpness of the picture.  
Softer Sharper  
You can change the colour intensity of the picture.  
Lighter Deeper  
You can change the colour tint only in NTSC.  
Reddish Greenish  
Tint  
You can change the white balance of the picture to better match the type of video being viewed.  
Cool  
Warm  
Mid  
: Bluish white colour.  
: Reddish white colour.  
: Normal white colour.  
White Balance  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture setting (continued)  
Finer picture adjustment  
&EATURES  
#LEAR 3$  
/FF  
/FF  
/FF  
/FF  
/FF  
/FF  
/FF  
/FF  
/FF  
$IGITAL 6.2  
$IGI0URE  
0ULL $OWN  
#OLOUR -ANAGEMENT  
0ICTURE -ANAGEMENT  
3MART 0ICTURE  
$YNAMIC "ACKLIGHT  
-0%' .OISE 2EDUCTION  
#OLOUR 3YSTEM  
:OOM  
:
For clearly picture (Off / Mode-1 / Mode-2)  
Clear SD  
When Clear SD set to Mode-1 or Mode-2, then Digital VNR, DigiPure, Picture Management  
and MPEG Noise Reduction cannot be operated.  
Digital VNR  
DigiPure  
:
:
:
:
:
:
Reduces the amount of noise in original picture. (Off / On)  
For natural - looking outlines (Off / On)  
For smooth cinema lm (Auto / Off / On)  
For natural - looking pictures (Off / On)  
Pull Down  
Features  
Colour Management  
Picture Management  
Smart Picture  
Fixs bright / dark pictures. (Off / On)  
Makes it easier to view white areas (Off / On)  
Dynamic Backlight  
:
:
Reduces the brightness of the backlight when the screen is dark (Off / On)  
Reduces MPEG video noise (Off / On)  
MPEG Noise  
Reduction  
:
:
When there is no colour, change the colour system. (PAL / SECAM / NTSC 3.58 / NTSC 4.43 / AUTO)  
Colour System  
Zoom  
When HD (720p,1080i or 1080p), PC signal is received, the  
following zoom mode can be selected.  
Changes the aspect ratio.  
Zoom  
mode  
ꢇꢇ  
:OOM  
Panoramic  
16 : 9  
Regular/Slim  
4 : 3  
14:9 Zoom  
14 : 9  
Panoramic  
Zoom  
Full  
Slim  
Full Native  
!UTO  
0ANORAMIC  
2EGULAR  
signal  
720p  
0ANORAMIC  
ꢀꢁꢂꢃ :OOM  
ꢀꢄꢂꢃ :OOM  
-
1080i  
ꢀꢄꢂꢃ :OOM 3UBTITLE  
&ULL  
1080p  
PC mode  
(Regular)  
-
-
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound setting  
1. Display “Sound” menu.  
2. Select item or setting  
Sound  
1. Select  
2. Enter  
1. Select  
D <  
I II Mono  
Stereo/I II  
3OUND  
Sound Meister  
Treble  
Bass  
Surround  
Balance  
Voice Enhancer  
Al Volume  
Off  
2. Adjust  
3. Finish  
Off  
Off  
Stereo/I II  
Selects the broadcast sound stereo, mono or bilingual language (u: Mono / m : Stereo / I : SUB1 / II : SUB2 / Mono)  
Sound Meister  
Treble  
Sets sound theme to match your listening source (Off / Dynamic / Pure / Living)  
Compensates high frequencies to widen the frequency band. (Weaker  
Compensates low frequencies to widen the frequency band. (Weaker  
Stronger)  
Stronger)  
Bass  
Surround  
Balance  
Expands the stereo sound naturally. (Narrower  
Wider)  
Sets speaker balance (Left Stronger  
Right Stronger)  
Voice Enhancer  
Al Volume  
Uses sound enhancement technology (On/Off)  
Prevents sudden increase or decrease of sound when changing channels. (On/Off)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful functions  
1. Display “Features” menu.  
2. Select item or setting  
To enter an items menu  
&EATURES  
/N 4IMER  
3LEEP 4IMER  
#HANNEL 'UARD  
"LUE "ACK  
#HILD ,OCK  
!UTO 3HUTOFF  
&AVOURITE 3ETTING  
0OWER ,AMP  
%CO 3ENSOR  
1. Select  
2. Enter  
1. Select  
1. Select  
/FF  
/FF  
/FF  
2. Adjust  
3. Finish  
&EATURES  
2. Enter  
/FF  
/FF  
1. Select PR channel that you want to watch.  
Select PR channel  
2. Set the On time to your desired period of time.  
On Timer  
/N 4IMER  
TV to turn on  
automatically from  
standby mode at  
a set channel and  
time.  
02  
/N 4IMER  
ꢊꢆ  
ꢊꢊ  
ꢊꢊ  
3. Set  
1. Select “On  
Timer”  
2. Set time, maximum  
12 hours (12:00)  
(Blue)  
Note : Press  
to reset the time.  
1. Select time in 10  
minutes intervals  
Note : When the remaining elapse is one minute,  
“Good Night!” appears on the screen.  
3LEEP 4IMER  
> ꢊ  
Sleep Timer  
ꢀꢆꢊ  
TV to turn off  
/FF  
>
automatically to  
standby mode after  
a set time.  
2. Set  
1. Select “Channel Guard”  
2. Select a channel and lock it ( : locked )  
Channel Guard  
ꢇꢇ  
Lock / Release  
(Blue)  
#HANNEL 'UARD  
)$  
3ET )$ .Oꢑ  
1. Select a  
number  
1. Select a  
channel  
02  
ꢊꢀ  
ꢊꢆ  
ꢊꢈ  
ꢊꢁ  
ꢊꢉ  
ꢊꢄ  
ꢊꢌ  
ꢊꢍ  
ꢊꢃ  
ꢀꢊ  
#(ꢎ##  
#( ꢊꢆ  
#( ꢊꢈ  
#( ꢊꢌ  
#( ꢌꢄ  
#( ꢀꢆ  
#( ꢊꢃ  
#( ꢊꢉ  
#( ꢊꢆ  
#( ꢀꢉ  
#( ꢆꢍ  
Stops children from  
watching specic  
channels.  
""#!"#  
!"#$%&  
2. To the next  
position  
3. Enter  
• View a locked channel by use the numerical buttons to enter the channel number. When appears, press “DISPLAY”  
button and enter your “ID No.”  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful functions (continued)  
Blue Back  
Child Lock  
Auto Shutoff  
Displays a blue screen and mute the sound when the signal is weak or absent. (On / Off)  
Disables the side control buttons of the TV. (On / Off)  
Sets the power to turn off if no TV signal (RF) is received and no operation is performed for about 15 minutes. (On / Off)  
Deletes the favourite channel that you registered.  
(Blue)  
1. Select  
&AVOURITE 3ETTING  
&AVOURITE 3ETTING  
02 ꢊꢀ  
02 ꢊꢈ  
02 ꢊꢆ  
02 ꢊꢀ  
02 ꢊꢆ  
Favourite Setting  
To delete  
Power Lamp  
Eco Sensor  
Sets power lamp lighting while the TV is on. (On / Off) (P. 4)  
Automatically adjusts the picture contrast according to the brightness of your room (On / Demo / Off)  
• Change the on screen menu size.  
2. Select “Appearance”  
1. Display “Set Up” menu.  
Appearance  
3ET 5P  
!UTO 0ROGRAM  
%DIT ꢎ -ANUAL  
,ANGUAGE  
6IDEOꢅꢀ 3ETTING  
!PPEARANCE  
4ELETEXT ,ANGUAGE  
($-) 3ETTING  
0# 3ETTING  
1. Select  
2. Enter  
Change the on-screen  
menu size.  
1. Select  
6IDEO  
3IZEꢅꢀ  
3ET 5P  
2. Adjust to  
Size-1 / Size-2  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing Teletext  
Watching Video or DVDs  
Select the input Source.  
!6 3ELECT  
This TV can display TV broadcasts and Teletext on the same channel in  
two windows.  
Note: TV/VIDEO  
button select the  
video source by  
move down or  
use button 0-6 for  
selection.  
1. Select  
2. Set  
ꢊꢀ  
6IDEOꢅꢀ  
6IDEOꢅꢆ  
($-)  
($-)  
($-)  
0#  
1.  
When watching TV  
TV  
TEXT TEXT  
• Operate the connected device and play video.  
4%84ꢅꢅꢅ  
4%84ꢅꢅꢅ  
1. Select “Set Up”  
4%84ꢅꢅꢅ  
4%84ꢅꢅꢅ  
1. Select  
3ET 5P  
2. Enter  
2. Select item  
3ET 5P  
1. Select item  
2. Setting or Adjust  
3. Set  
2. Select a Teletext page by pressing number button (0-9)  
!UTO 0ROGRAM  
%DIT ꢎ -ANUAL  
,ANGUAGE  
6IDEO ꢅ ꢀ 3ETTING  
!PPEARANCE  
4ELETEXT ,ANGUAGE  
($-) 3ETTING  
0# 3ETTING  
6IDEO  
3IZEꢅꢀ  
• Move up or down a page by  
Switch between video and component signal  
(Video / Component)  
Video - 1 Setting  
HDMI Setting  
Holds the current page.  
Hold  
• Cancels by pressing this button again.  
Setting for HDMI input  
($-) 3ETTING  
Size  
:Normally set to “Auto.” If wrong screen size  
appears in 480p (525p), change to “1” or “2”  
($-) ꢀ  
3IZE  
!UDIO  
-ODE  
!UTO  
$IGITAL  
Doubles the size of the displayed text.  
Size  
Index  
Audio :Normally set to “Auto.” If no sound, change to  
“Analogue” or “Digital.”  
Mode :If no picture, change to “1” or “2”.  
($-) ꢆ  
3IZE  
!UTO  
-ODE  
($-) ꢈ  
3IZE  
!UTO  
-ODE  
Returns to page “100” or a previously  
designated page.  
Setting for PC input  
PC Setting  
>
PC Setting  
>
1. Select PC  
Position  
1. Adjust  
2. Set  
PC Position  
Phase  
Displays, and/or changes the number of Sub-  
page.  
• Cancel by press this button again.  
Pixel  
Sub-page  
Reveal  
2. Enter  
PC Position : Adjusts screen position.  
Phase :Sets the focus of screen.  
Pixel :Adjusts the horizontal feature of screen.  
Displays hidden information  
• Example : answer to a quiz, etc.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Conguring your remote control  
You can congure your TV’s remote control to  
operate your other devices.  
Note  
• If your device does not respond, try all the available codes for the  
device’s brand.  
Congure your remote control.  
1. Turn on the device manually.  
• If none of the code works, or the brand is not listed, refer to “Using the  
search code function” (P. 14).  
2. Switch the remote control mode that matches  
your device. Refer to the table on the right to  
select an appropriate mode.  
MODE  
TV  
Applicable devices  
This TV only  
TV  
STB  
STB  
Cable Set Top Box, Cable/PVR Combination,  
Satellite Set Top Box, SAT/PVR Combination  
AUDIO  
BD/DVD  
BD/DVD  
AUDIO  
DVD, Blu-Ray DVD, HD DVD, DVD-R, Home  
Theater in Box, TV/DVD Combination  
• The indicator lights for 3 seconds each time the  
remote control is operated.  
Amplier, Receiver, Home Theater in Box  
3. Find the remote control code for your device  
according to its brand from the “Remote  
control codes” manual.  
4. Set the remote control code.  
Press and hold  
Enter four digit Release the  
number button  
5. Point the remote control at your device, press  
and conrm that your device is turned  
off. If your device does not respond, try  
entering another available code.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button functions  
Using the search code function  
This function searches through the codes one by one, beginning from  
the rst code in the list.  
Change the remote control mode  
1. Turn on the device manually.  
2. Switch the remote control mode that matches your device.  
Press  
to select the mode.  
Turn on/off the device  
3. Activate the search code function.  
Hold down and until the mode indicator blinks.  
Navigate the menus  
Select  
Display menu  
4. Point the remote control at your device and press  
.
If there is no response, try the next code by pressing } and  
OK  
press  
off.  
again. Repeat the process until your device turns  
Display top  
menu  
Back to previous  
menu  
5. Press to register the code.  
The code is now set. Conrm that the mode indicator goes out.  
Playback / Record, etc.  
Select a chapter  
If your TV’s remote control still does not work even after using the  
search code function, use your device’s own remote control. The  
TV’s remote control is not guaranteed to work with all models,  
brands or operations.  
Rewind  
Forward  
Pause  
Record  
Stop Play  
Mute Press “  
Volume Press “  
Select a surround mode Press “  
Depending on your device, some functions may  
not be operable with this remote control.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.  
Poor picture quality  
Page  
P. 7  
Severe noise or snow  
Page  
P. 4  
P. 4  
--  
Unnatural colour >> Adjust “Colour” and “Backlight”  
Check the aerial cable and TV connections .  
Check the direction of the aerial.  
Check the aerial or its cable damaged or not.  
Patterns, stripes or noise  
Check “Colour System”. If “Auto” is selected  
select the specic colour system manually.  
Noise >> Set to the following functions.  
Picture Mode : Standard  
DigiPure : On  
P. 8  
P. 7  
P. 8  
Interference caused by devices such as an amplier, personal computer,  
or a hair drier, Move it away from TV.  
--  
--  
Dull picture >> Set to the following functions.  
Picture Mode : Bright  
Ghosting ( Doubling of images )  
P. 7  
P. 8  
Interference occurs caused by signal reection from mountains or  
building. Try to adjust the aerial’s direction or use another antenna.  
DigiPure  
Poor sound  
Adjust the “Bass” and “Treble”.  
: On  
Cannot turn it on  
P. 9  
P. 9  
P. 6  
Ensure the power cord is connected to the AC outlet correctly.  
Cannot operate the remote control.  
--  
--  
If receiving a poor signal in “Stereo/I II” switch to “Mono”.  
Adjust the channel reception using “Manual”.  
The batteries may be exhausted. Replace with new batteries.  
Ensure that you are operation the remote control at less than 7 meters  
from the front of your TV.  
For HDMI signal, wrong screen size in 480p (525p).  
Switch “Size” in “HDMI Setting” to “1” or “2”.  
P. 12  
--  
For HDMI signal, green and distorted screen  
Remote control stops working  
Wait a little for the signal to stabilize when switching the signal format  
for an “HDMI” device.  
Unplug TV, several minutes later plug it in again.  
Side control buttons do not work  
Switch “Child Lock” to “Off”.  
--  
For HDMI signal, No picture / No sound  
Use the cable marked with HDMI logo.  
Check if the device is compliant with HDMI.  
P. 11  
P. 8  
P. 5  
P. 12  
Aspect ratio changed unintentionally  
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices,  
or “Analogue” or “Auto” for DVI devices.  
Press “  
” button to return to your settings.  
PC screen alignment is off  
Some functions do not work.  
Adjust the “PC Position” in “PC Setting” of Set Up menu.  
Blue screen appears on the screen  
Switch “Blue Back” to “Off”.  
P. 12  
P. 11  
It is not a malfunction. Some functions (dark background) in the menu  
do not work depending on the situation.  
--  
--  
Black or white dots appear on the screen.  
Strange picture when using an external device  
LCD panels use ne dots (“pixels”) to display images. While more than  
99.99% of these pixels function properly, a very small number of pixels  
may not light, or may light all the time. It is not a malfunction.  
If the top of the image is distorted, check the video signal quality itself.  
If movement appears unnatural when receiving a signal from a DVD  
player, etc. with 625p (progressive-scanning), change the output setting  
of the external device to 625i (interlace-scanning)  
--  
--  
No picture, No sound  
Some input do not output from OUTPUT terminal.  
--  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical information  
Language group for Teletext  
PC Signals that can be displayed  
If the signal doesn’t appear, check that the vertical frequency on the  
PC is set to “60Hz”.  
Group  
Group-1  
Languages  
Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese,  
Greek, Swedish, Finnish  
Resolution  
640 x 480(VGA) / 1024 x 768(XGA)  
60.0  
Group-2  
Group-3  
Group-4  
Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, Hungarian,  
German, French, Italian, Swedish, Finnish  
Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian, Croatian,  
Slovenian, Czech, Slovak, English, German  
Vertical frequency (Hz)  
Arabic, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish,  
Portuguese, Swedish, Finnish  
Group-5  
Group-6  
English, French, Turkish, Farsi  
Lettish, Lithuanian, Estonian, Ukrainian, Czech, Slovak, English, German  
• If the characters are unreadable. Select different Teletext language  
group. (P. 6)  
What is “Clear SD”  
LCD picture is unstable due to a large number of signal noise. Such noise  
appears extensively especially when an LCD displays SD signals. Clear  
SD mode resolves disadvantage for better picture quality.  
Sound and Colour system in your country or region  
Area  
Country or Region  
System System  
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,  
Yemen, Indonesia, Malaysia, Singapore, Thailand, India, etc.  
B/G  
PAL  
D/K  
China, Vietnam, etc.  
No use "Clear SD"  
Use "Clear SD"  
Asia, Middle East  
Hong Kong, etc.  
I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.  
Philippines, Taiwan, Myanmar, etc.  
Russia, etc.  
B/G  
M
SECAM  
NTSC  
SECAM  
D/K  
Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
Europe  
Connect “DVI” devices  
B/G  
PAL  
I
B/G  
I
Connect a “DVI” device to “HDMI” using “DVI-HDMI” conversion cable. Connect  
analogue sound output of the DVI device to L and R terminals in HDMI-1.  
Set “Audio” in “HDMI Setting” to “Analogue” or “Auto” (P. 12)  
HDMI-2 and HDMI-3 input does not support analogue sound (IN HDMI-1).  
Oceania  
Africa  
Australia, New Zealand, etc.  
Republic of South Africa, etc.  
Nigeria, etc.  
PAL  
PAL  
B/G  
Egypt, Morocco, etc.  
SECAM  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical information (continued)  
What is “Full Native”?  
What is “Eco Sensor”?  
• With the full HD LCD display and “Full Native”, you can enjoy full native  
HD resolution of 1920 x 1080. It exposes aws in the video that were  
hidden when viewing on “Full”.  
You can adjust this TV so that the screen automatically adjusts to the  
optimum contrast of light and dark according to the brightness of your  
room.  
This function reduces eyestrain and the power consumption of this TV.  
• Set “Eco Sensor” (P. 11)  
Full  
Full Native  
• Make sure not to block the Eco Sensor on front of the TV (P. 4)  
To fully reduce eyestrain and the power consumption of this TV. Set to  
the following functions.  
Eco Sensor : On or Demo (P. 11)  
Smart Picture : On (P. 8)  
Using “Demo” in “Eco Sensor”, you can display the effect of the “Eco  
Sensor” on the screen.  
* The illustrations are emphasised to make clear differences between  
“Full” and “Full Native”.  
• Dark bar or noise may appear at the edges of the screen when viewing  
in “Full native” for some videos. This is resulted from the signal itself,  
not due to TV malfunction.  
Eco Sensor  
Dark  
Light  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH / CC List  
To use the Insert function (P. 6), nd the “CH/CC” number corresponding to the TV’s channel number from this table.  
US:  
CCIR:  
OIRT:  
The US channel numbers are the channel numbers used in the United States, Philippines, etc.  
The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc.  
The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc.  
AUSTRALIA: The AUSTRALIA channel numbers are the channel numbers used in Australia, etc.  
CH 48  
CH 49  
CH 50  
CH 51  
CH 52  
CH 53  
CH 54  
CH 55  
CH 56  
CH 57  
CH 58  
CH 59  
CH 60  
CH 61  
CH 62  
CH 63  
CH 64  
CH 65  
CH 66  
CH 67  
CH 68  
CH 69  
US-48, W+63  
US-49, W+64  
US-50, W+65  
US-51, W+66  
US-52, W+67  
US-53, W+68  
US-54, W+69  
US-55, W+70  
US-56, W+71  
US-57, W+72  
US-58, W+73  
US-59, W+74  
US-60, W+75  
US-61, W+76  
US-62, W+77  
US-63, W+78  
US-64, W+79  
US-65, W+80  
US-66, W+81  
US-67, W+82  
US-68, W+83  
US-69, W+84  
E48  
E49  
E50  
E51  
E52  
E53  
E54  
E55  
E56  
E57  
E58  
E59  
E60  
E61  
E62  
E63  
E64  
E65  
E66  
E67  
E68  
E69  
CC 24  
CC 25  
CC 26  
CC 27  
CC 28  
CC 29  
CC 30  
CC 31  
CC 32  
CC 33  
CC 34  
CC 35  
CC 36  
CC 37  
CC 38  
CC 39  
CC 40  
CC 41  
CC 42  
CC 43  
CC 44  
CC 45  
CC 46  
CC 47  
CC 48  
CC 49  
CC 50  
CC 51  
CC 52  
CC 53  
CC 54  
CC 55  
CC 56  
CC 57  
CC 58  
CC 59  
CC 60  
CC 61  
CC 62  
CC 63  
CC 64  
CC 75  
CC 76  
CC 77  
CC 78  
CC 79  
CC 95  
CC 96  
CC 97  
CC 98  
CC 99  
K
S-24  
S-25  
S-26  
S-27  
S-28  
S-29  
S-30  
S-31  
S-32  
S-33  
S-34  
S-35  
S-36  
S-37  
S-38  
S-39  
S-40  
S-41  
Channel  
CH  
L
US  
CCIR  
OIRT  
AUSTRALIA  
AU-0  
M
CH 02  
US-02  
US-03  
US-04  
US-05  
US-06  
US-07  
US-08  
US-09  
US-10  
US-11  
US-12  
US-13  
E2  
R1  
N
CH 03  
CH 04  
CH 05  
CH 06  
CH 07  
CH 08  
CH 09  
CH 10  
CH 11  
CH 12  
CH 13  
CH 14  
CH 15  
CH 16  
CH 17  
CH 18  
CH 19  
CH 20  
CH 21  
CH 22  
CH 23  
CH 24  
CH 25  
CH 26  
CH 27  
CH 28  
CH 29  
CH 30  
CH 31  
CH 32  
CH 33  
CH 34  
CH 35  
CH 36  
CH 37  
CH 38  
CH 39  
CH 40  
CH 41  
CH 42  
CH 43  
CH 44  
CH 45  
CH 46  
CH 47  
E3  
AU-1  
AU-2  
AU-6  
AU-7  
AU-8  
AU-9  
O
E4  
R2  
R6  
R7  
R8  
R9  
P
E5  
Q
E6  
R
E7  
S
E8  
T
E9  
U
E10  
E11  
E12  
R10  
R11  
R12  
AU-10  
AU-11  
V
W
W+1  
W+2  
W+3  
W+4  
W+5  
W+6  
W+7  
W+8  
W+9  
W+10  
W+11  
W+12  
W+13  
W+14  
W+15  
W+16  
W+17  
W+18  
W+19  
W+20  
W+21  
W+22  
W+23  
W+24  
W+25  
W+26  
W+27  
W+28  
US-14, W+29  
US-15, W+30  
US-16, W+31  
US-17, W+32  
US-18, W+33  
US-19, W+34  
US-20, W+35  
US-21, W+36  
US-22, W+37  
US-23, W+38  
US-24, W+39  
US-25, W+40  
US-26, W+41  
US-27, W+42  
US-28, W+43  
US-29, W+44  
US-30, W+45  
US-31, W+46  
US-32, W+47  
US-33, W+48  
US-34, W+49  
US-35, W+50  
US-36, W+51  
US-37, W+52  
US-38, W+53  
US-39, W+54  
US-40, W+55  
US-41, W+56  
US-42, W+57  
US-43, W+58  
US-44, W+59  
US-45, W+60  
US-46, W+61  
US-47, W+62  
E21  
E22  
E23  
E24  
E25  
E26  
E27  
E28  
E29  
E30  
E31  
E32  
E33  
E34  
E35  
E36  
E37  
E38  
E39  
E40  
E41  
E42  
E43  
E44  
E45  
E46  
E47  
Channel  
CC  
US  
CCIR  
OIRT  
AUSTRALIA  
AU-5  
CC 01  
CC 02  
CC 03  
CC 04  
CC 05  
CC 06  
CC 07  
CC 08  
CC 09  
CC 10  
CC 11  
CC 12  
CC 13  
CC 14  
CC 15  
CC 16  
CC 17  
CC 18  
CC 19  
CC 20  
CC 21  
CC 22  
CC 23  
S-1  
S-2  
S-3  
S-4  
S-5  
S-6  
AU-5A  
S-7  
S-8  
S-9  
S-10  
S-11  
S-12  
S-13  
S-14  
S-15  
S-16  
S-17  
S-18  
S-19  
S-20  
S-21  
S-22  
S-23  
A
B
C
D
E
F
G
H
I
X
Y
R3  
R4  
R5  
Z
AU-3  
AU-4  
Z+1  
Z+2  
A-5  
A-4  
A-3  
A-2  
A-1  
J
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specication  
Main unit  
Terminals / Connectors  
Model  
LT-42Z49  
Terminal name  
Terminal type  
Signal type (IN)  
Signal type (OUT)  
Broadcasting systems  
Colour systems  
B / G / I / D / K / M  
Composite video, Analogue  
component 576i (625i) / 480i  
(525i),  
PAL, SECAM, NTSC 3.58 / NTSC 4.43 MHz  
Channels and frequencies  
VHF low channel (VL) = 46.25 to 140.25 MHz  
VHF high channel (VL) = 147.25 to 423.25 MHz  
UHF channel (U) = 431.25 to 863.25 MHz  
Receives cable channels in mid band (X to Z+2, S1 to S10),  
super band (S11 to S20) and hyper band (S21 to S41).  
Progressive : 576p (625p) /  
480p (525p),  
HD : 1080i (1125i), 720p  
(750p) / 1080p (1125p)  
Audio L / R  
VIDEO-1  
RCA connectors x 6  
Sound-multiplex systems  
Teletext systems  
NICAM (I / B / G / D / K), A2 (B / G / D / K)  
FLOF (Fastext), WST (World System Teletext)  
AC 110 V - 240 V, 50/60Hz  
Composite video, Audio L / R  
VIDEO-2  
RCA connectors x 3  
Input  
terminals  
HDMI  
HDMI-1  
Power requirements  
576i (625i) / 480i (525i)  
HDMI-2  
HDMI connector x 1 / 576p (625p) / 480p (525p),  
720p (750p) / 1080p (1125p) /  
1080i (1125i)  
Audio output  
(Rated power output)  
10 W + 10 W  
HDMI-3  
Speakers  
(4 cm x 16 cm) x 2  
IN HDMI -1  
PC INPUT  
PC AUDIO  
RCA connectors x 2 Audio L/R  
Power consumption  
[standby]  
160 W  
[1.3 W]  
Analogue PC signal  
D-SUB (15 pins) x 1  
Screen size  
(visible area size measured  
diagonally  
Audio  
PC-IN (3.5 pinjack) x 1  
106.7 cm  
Composite video,  
Audio L / R  
MONITOR OUT RCA connectors x 3  
Output  
terminals  
Dimensions  
(W x H x D: mm  
[without stand]  
1014 x 695 x 279  
1014 x 646 x 109  
Stereo mini-jack x 1  
Headphone  
Headphone  
output  
(3.5 mm in diameter)  
Weights  
[without stand]  
20 kg  
[19 kg]  
• We may change the design and specications without notice.  
• HDMI, the HDMI Logo and High-Denition Multimedia Interface are  
trademarks or registered trademarks of HDMI Licensing LLC.  
Accessories  
Remote control unit : RW-C2510 x 1  
AAA/R03 dry cell battery x 2  
Screw x 4  
Safety band (belt) and Screw x 1  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2009 Victor Company of Japan, Limited  
0509GLT-NF-MT  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Marine Sanitation System PD20X XXX XXX B User Manual
Insignia Computer Drive NS PCHD235 User Manual
JBL Speaker System Media100 200 User Manual
John Lewis Dishwasher JLDWS1208 User Manual
Kenwood Marine Radio TK 7102H User Manual
King Canada Saw KC 3003 User Manual
KitchenAid Ice Maker KUIC15NLTS0 User Manual
KitchenAid Microwave Oven KMHC319ESS User Manual
KitchenAid Refrigerator W10213162A User Manual
Kompernass DVD Player KH 6510 User Manual