IP CAMERA
INSTRUCTIONS
VN-V25U
VN-V26U
VN-V25U
VN-V26U
Thank you for purchasing this JVC product.
Before operating this unit, please read the
instructions carefully to ensure the best
possible performance.
LST0674-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
● This installation should be made by a
qualified service person and should conform
to all local codes.
● This installation shall be in accordance with
the National Electrical Code, ANSI/NFPA 70.
● The unit is to be powered by an AC 24 V
power supply.
The AC 24 V power supply should conform to
the following:Class 2 only(For USA),Isolated
power supply only(For Europe and other).
● Any Mention in this manual of Alarm inputs/
outputs have not been evaluated by UL to be
used for Burglar Alarm Functionality.
Due to design modifications, data given in this
instruction book are subject to possible change
without prior notice.
WARNING:
TOREDUCETHE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT
EXPOSETHIS APPLIANCETO RAIN
OR MOISTURE.
AVERTISSEMENT:
POUR EVITER LES RISQUES
D’INCENDIE OU D’ELECTRO-
CUTION, NE PAS EXPOSER
L’APPAREIL A L’HUMIDITE OU A LA
PLUIE.
This manual describes detailed usage of
VN-V25U/26U.
For basic usage of VN-V25U/26U, please
refer to AStart-up GuideB.
For latest information, please refer to
AReadmeB file in the CD-ROM.
INFORMATION (FOR CANADA)
RENSEIGNEMENT (POUR CANADA)
● The supplied CD-ROM includes
AInstructions (this manual)B(pdf), AAPI
GuideB(pdf), ASearch toolB and AWhite
Spot Correction ToolB.
This Class A digital apparatus complies with
Canadian ICES-003.
Cet appareil num rique de la Class A est
FOR USA-California Only
This product contains a CR Coin Cell Lithium
Battery which contains Perchlorate Material -
special handling may apply.
WARNING (FOR EUROPE):
This is a Class A product. In a domestic environment
this product may cause radio interference in which
case the user may be required to take adequate
measures.
See
www.dtsc.ca.gov/hazardouswaste/perchlorate
ENGLISH
Dear Customer,
This apparatus is in conformance with the valid European directives and standards regarding
electromagnetic compatibility and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technology Centre Europe GmbH
Company name changed in:
JVC Technical Services Europe GmbH
Postfach 10 05 52
61145 Friedberg
Germany
DEUTSCH
Sehr geehrter Kunde, sehr geehrte Kundin,
dieses Gerät stimmt mit den gültigen europäischen Richtlinien und Normen bezüglich
elektromagnetischer Verträglichkeit und elektrischer Sicherheit überein.
Die europäische Vertretung für die Victor Company of Japan, Limited ist:
JVC Technology Centre Europe GmbH
Firmenname geändert in:
JVC Technical Services Europe GmbH
Postfach 10 05 52
61145 Friedberg
Deutschland
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances.
IMPORTANT SAFEGUARDS
1. Read all of these instructions.
2. Save these instructions for later use.
3. All warnings on the product and in the operating instructions should be adhered to.
4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
5. Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.
6. Do not use this appliance near water - for example, near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool, etc.
7. Do not place this appliance on an unstable cart, stand, or table. The appliance may
PORTABLE CART WARNING
(symbol provided by RETAC)
fall, causing serious injury to a child or adult, and serious damage to the appliance.
Use only with a cart or stand recommended by the manufacturer, or sold with the
appliance. Wall or shelf mounting should follow the manufacturer’s instructions,
and should use a mounting kit approved by the manufacturer. An appliance and
cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the appliance and
cart combination to overturn.
8. Slots and openings in the cabinet and the back or bottom are provided for
S3125A
ventilation, and to insure reliable operation of the appliance and to protect it from
overheating, these openings must not be blocked or covered. The openings
should never be blocked by placing the appliance on a bed, sofa, rug, or other similar surface.
This appliance should never be placed near or over a radiator or heat register. This appliance should
not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
9. This appliance should be operated only from the type of power source indicated on the marking label.
If you are not sure of the type of power supplied to your home, consult your dealer or local power
company. For appliance designed to operate from battery power, refer to the operating instructions.
10.For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning and power-line surges.
11.Do not allow anything to rest on the power cord. Do not locate this appliance where the cord will be
abused by persons walking on it.
12.Follow all warnings and instructions marked on the appliance.
13.Do not overload wall outlets and extension cords as this can result in fire or electric shock.
14.Never push objects of any kind into this appliance through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the appliance.
15.Do not attempt to service this appliance yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
16.Unplug this appliance from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the appliance.
c. If the appliance has been exposed to rain or water.
d. If the appliance does not operate normally by following the operating instructions. Adjust only those controls
that are covered by the operating instructions as improper adjustment of other controls may result in damage
and will often require extensive work by a qualified technician to restore the appliance to normal operation.
e. If the appliance has been dropped or the cabinet has been damaged.
f. When the appliance exhibits a distinct change in performance - this indicates a need for service.
17.When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
18.Upon completion of any service or repairs to this appliance, ask the service technician to perform
routine safety checks to determine that the appliance is in safe operating condition.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Internet Explorer Setup ......................... 33
Privacy Mask Page ............................... 56
Motion Detection Page ......................... 58
Access Restrictions Page ..................... 66
Password Page ..................................... 69
LED State Page .................................... 71
Operation Page ..................................... 75
Getting Started ................................... 2
Main Features ............................................. 6
Operating Environment ............................... 7
Cautionary Notes ........................................ 8
Name and Function of Parts ..................... 10
Side ....................................................... 11
Features ................................................... 13
Setup Procedures ..................................... 15
Mounting the Lens .................................... 16
Connecting to the AC 24 V power
Using the PoE ....................................... 18
Monitor Signal Output Terminal
Connecting the audio signal output
terminal (VN-V26U only) ................... 19
Alarm Input/Output Terminal
Alarm Input Terminal ............................ 20
Alarm Output Terminal .......................... 20
Mounting the Camera ............................... 21
Mounting to the Housing Using the Inner
Tripod Base ....................................... 22
Back Focus Adjustment ............................ 23
Network Requirements ............................. 24
Viewer ........................................... 82
JPEG Viewer Configuration .................. 84
Exiting the JPEG Viewer ....................... 87
Screen Configuration of MPEG4
Viewer ........................................... 88
MPEG4 Viewer Configuration ............... 90
Exiting the MPEG4 Viewer ................... 93
Audio Setup (VN-V26U only) ................ 94
Shortcut for Built-in Viewer ................... 96
Network Settings ............................. 27
IP Address Settings .................................. 27
Setting the IP address for
Others ................................................97
Troubleshooting ........................................ 97
Specifications ......................................... 100
Dimension ........................................... 102
VN-V25U/26U ............................... 27
When the IP address of
VN-V25U/26U is known ................ 32
When the IP address of
VN-V25U/26U is unknown ............ 32
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Ⅵ Support for PoE (Power over
Main Features
Ethernet)
This product supports PoE (IEEE802.3af) and
enables power supply from a LAN cable.
PoE: class 2 (VN-V25U)
Ⅵ High Picture Quality
The camera unit of this product employs a
330,000-pixel CCD (1/4") which enables high
quality video surveillance.
class 0 (VN-V26U)
Ⅵ
Built-in JPEG and MPEG4 Viewer
Ⅵ Support for Dual Stream
Simultaneous distribution of JPEG and MPEG4
images is possible.
Monitoring of JPEG and MPEG4 images via a
computer is possible by downloading the built-in
viewer onto the computer.
VN-V26U also enables monitoring of audio using
the computer.
Ⅵ Realization of Full Frame Rate
Data transmission is possible in VGA size at a
rate of 30 fps.
Ⅵ Analog Monitor Signal Output (For
Installation)
Ⅵ Support for Multicast
This product comes with an analog video
monitor signal output terminal for adjusting the
camera angle during installation.
This product supports multicast, which enables
transmission of image data to multiple
computers on the network without lowering the
frame rate. (Audio is supported for VN-V26U)
Ⅵ Compatibility with Conventional
Peripheral Devices
Ⅵ Built-in Web Server
You can configure the picture quality and
communication settings using the Internet
Explorer.
This product comes in the same shape as
conventional CCTV security cameras, and
therefore can be used with other peripheral
devices for security cameras such as housings.
Ⅵ HTTP-based API
This product comes with HTTP-based API. This
feature enables you to perform setting and
control via the network.
Ⅵ Built-in microphone and audio output
terminal (VN-V26U only)
Built-in microphone enables sending audio to
computers. And this product can receive audio
from a computer and output to audio terminal.
Ⅵ Electronic Sense Up
You can shoot images during surveillance at a
dark place by lengthening the exposure time to
enhance the camera’s sensitivity level.
Ⅵ Night Surveillance
This product comes with a low luminance
feature, which switches automatically to the high
sensitivity mode (black-and-white).
VN-V26U is equipped with an infrared ray cutoff
filter plug that enables day and night
surveillance. Turning off the infrared ray cutoff
filter when the light intensity level is low, such as
at night, enables you to switch to the high
sensitivity mode (B&W mode).
In the case of VN-V25U, you can switch to a
simple high sensitivity mode by turning off the
color signals when the light intensity level is low,
such as at night (Easy day and night mode).
Ⅵ Privacy Mask
You can configure the privacy mask setting to
hide specific area in shooting area.
Ⅵ Motion Detection
This feature enables output of an alarm upon
detection of motion in the video image within
preset area.
Pre-/Post-recorded image files may be sent via
FTP using the alarm input.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use this manual
Operating Environment
Ⅵ Symbols used
Ⅵ Recommended Computer
Caution : Describes precautions concerning
Specifications
the operation of this product.
OS
: Windows XP (Professional or
Home Edition) (SP2)
Note
: Describes reference information,
such as functions and usage
restrictions of this product.
CPU
: Pentium4 1.5 GHz or higher
Memory capacity
: 1 GB or more
Free hard disk space
: 512 MB or more
Display and video card
: 1024
ן 768 pixels or larger, A
: Indicates the reference page
numbers and reference items.
Ⅵ Diagrams and images on features
that are common between VN-V25U
and VN-V26U are indicated as
VN-V25U.
True Color (24 or 32 bits)
VRAM 8 MB or more (256 MB
and above recommended)
Ⅵ Content of this manual
● All rights reserved by JVC. Unauthorized
duplication or reprinting of this manual, in
whole or in part, is strictly prohibited.
● Windows is a registered trademark of
Microsoft Corporation in the U.S.
● All other product names used in this
manual are trademarks or registered
trademarks of their respective companies.
Marks such as ீ, ா and have been
omitted in this manual.
Sound card (VN-V26U only)
: Sound Blaster (PCI
recommended)
Web browser : Internet Explorer
Version 6.0
Ⅵ LAN Environment
● 10BASE-T/100BASE-TX network
interconnected using devices such as an
IEEE802.3-compliant switching hub.
● IEEE802.3af-compliant switching hub when
PoE is in use.
IGMPv2-compliant network when multicast is
in use.
● Illustrated designs, specifications and other
contents of this manual are subject to
changes for improvement without prior
notice.
●
Note:
● The above PC specifications are guides for
smooth use of the applications, and not a
guarantee of their operation.
● Depending on the condition of use,
applications may not run smoothly even
when the user’s computer meets the
specification requirements.
● Using a computer for which its performance
does not meet the requirements may cause
the JPEG playback frame rate to deteriorate.
In addition, it also causes delay in the
MPEG4 playback images, and may result in
interruption in playback.
Audio may be interrupted. (VN-V26U only)
● To make use of the built-in MPEG4 Viewer of
VN-V25U/26U, install “ffdshow” that is open
source codec. You can download “ffdshow”
from the Internet.
● AD/DA clock varies significantly depending
on the sound card built in the PC. Using such
card may cause overflow or underflow of
audio data and noise may occur in the
playback sound.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Saving Energy
Cautionary Notes
ⅷ When this product is not in use for a long
period of time, turn off the power of the
system to ensure safety and reduce power
consumption.
Maintenance and location of use
ⅷ This product is intended for use indoors.
Make sure that you use a housing etc., when
using it outdoors.
Maintenance
ⅷ Do not place this product in the following
ⅷ Be sure to turn off the power before
environments.
performing maintenance.
Otherwise, it may malfunction or break down.
● Hot or cold locations beyond the
surrounding temperature range of -10°C
to 50°C.
● Locations beyond the allowable operating
humidity range of 20 % to 85 %.
(condensation is not allowed)
ⅷ Wipe this product using a soft cloth.
Wiping with thinner or benzene may melt or
tarnish its surface. For dirt that cannot be
easily removed, wipe using a neutral
detergent diluted with water, followed by
wiping with a dry cloth.
●
Near equipment that emits strong magnetic
fields, such as transformers or motors.
Copyright Protection
● Near equipment that emits radio waves,
such as transceivers and mobile phones.
● Locations with excessive dust or sand.
● Locations that are subject to excessive
vibration.
● Locations prone to moisture such as
window side.
ⅷ With the exception of the user being the
copyright holder or when permission such as
for duplication has been granted by the
copyright holder, permission is required in
principle for the duplication, modification, or
transmission of copyrighted video and audio
data.
● Locations subject to steam or oil, such as
kitchens.
Unauthorized duplication, modification, or
transmission of copyrighted material may
constitute a copyright infringement, and the
user may be liable to compensate for any
damages. When using copyrighted video/
audio data, be sure to check the license
agreement of the copyrighted material
thoroughly.
● Locations that emit radiation, X-rays or
corrosive gases.
ⅷ Use of this product or cables connected to
this product at locations where strong electric
waves and magnetic fields are emitted (e.g.,
near radio, TV, transformer, monitor, etc.)
may cause noise interferences in the images
or changes in the color.
When rights or rights holders are involved
with regard to the targeted duplicating
subject, permission may be required for
shooting or using (processing) it. Be sure to
check the licensing conditions thoroughly.
ⅷ Do not install this product at locations that
may trap heat.
This product also discharges heat from the
surface of the camera unit. As such, do not
install it at locations that may trap heat, such
as near walls.
Exemption of Liability
Handling Precautions
ⅷ The motion detection feature is not a feature
to prevent theft or fire. JVC shall not be liable
for any damage that occurs.
ⅷ JVC shall not be liable for any damage due to
the invasion of privacy by images of this
camera.
ⅷ Do not hang on this product, shake it, or hand
objects over it. Applying an excessive load
may cause the product to fall off and result in
accidents.
ⅷ Do not stack up the equipment.
Heat or noise of an equipment may cause
malfunction or failure of the other, and result
in fire.
Others
ⅷ The cable stopper of the alarm terminal may
come off in some cases. When mounting the
cables, make sure to do so carefully.
ⅷ Do not block vents around the equipment.
Inadequate heat ventilation may result in
malfunction of this product. Be sure not to
block vents around the product.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ⅷ If a high luminance object (such as a lamp) is
shot, a white smear may appear at the upper
and lower ends of this object on the screen.
This phenomenon (smear) is characteristic of
solid-state image sensors, and is not a
malfunction.
ⅷ
ⅷ
In the case of VN-V26U, the image and sound
may not synchronize when playing back using
built-in viewer. This is not a malfunction.
When VN-V26U is sending high bitrate, the
image and sound can be paused during
Black-and-white mode changing. This is not a
malfunction.
ⅷ Some hubs/switches of products that are
equipped with intelligent features may
include a broadcast/multicast suppression
function. Viewing of multicast images on this
product may fail if this function is enabled.
ⅷ Electricity can be supplied to this product
either by connecting the AC 24 V power
supply or using the PoE. Make sure to select
only one mode of electrical supply.
Connecting the power cord and the LAN
cable for the PoE at the same time may result
in failure or malfunction of the camera.
(A Page 17, 18)
ⅷ This product comes with a built-in AGC
circuit. When using this product with AGC set
to AMidB, AHighB or ASuperB, the sensitivity
level increases when the image is dark, and
the screen may appear grainy as a result.
However, this is not a malfunction.
ⅷ When using this product with the white
balance set to AATWB, the displayed color
may differ slightly from the actual color
according to the condition of the object due to
the principle of the automatic tracking white
balance circuit. This is not a malfunction.
ⅷ
The electronic shutter of this product is set to
1/30 by default. For regions with a
A
B
commercial power supply frequency of 50 Hz,
switch to the flickerless mode during use
under fluorescent lights (excluding inverter
lighting equipment) to prevent flickers.
ⅷ When the Black-and-white mode (VN-V26U)
or Easy Day and Night mode (VN-V25U) is
enabled, the image becomes black-and-white
in a dark place. As the sensitivity level is
increased in this case, the screen may
appear grainy and more white spots may
appear. When switching between color and
black-and-white images, the brighter area on
the screen is emphasized, which may reduce
the visibility. However, this is not a
malfunction.
ⅷ
If the power supply voltage is momentarily cut
off or reduced due to lightning, turning on of
the air conditioner’s power, etc., the image
may be disrupted or noise interference may
occur.
ⅷ
When using multicast, make use of a
IGMPv2-compliant network switch.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Name and Function of Parts
Front / Bottom / Side
The model illustrated in the diagram is VN-V26U.
A
B
I
H
G
E
C
D
J
A Back Focus Adjustment Ring
This ring is used for back focus adjustment and
switching the lens mount method.
To operate, loosen the I back focus fastening
screw by turning it in the anti-clockwise direction,
and turn the screw in the clockwise direction to
fasten after operation is complete.
This product is pre-adjusted to a position that is
best suited for CS mount.
(A Page 23)
Use screws with a length between 5 mm to
7 mm. Screws beyond the specified length may
damage the interior, while those shorter than
specified may cause the camera to fall off, and
therefore these must not be used.
(A Page 21)
Audio picked up using this microphone is sent to
computers.
B Lens Mount
G [MAC address] Indicator
This is a mount for mounting the lens.
The mount is compatible with CS mount lens
and C mount lens.
The MAC address is a unique physical address
of the product. This address cannot be altered.
(A Page 16)
H Camera Mounting Bracket
This bracket is pre-mounted to the bottom
surface of the camera. It can also be mounted to
the top surface according to the usage. Mount it
to the screw holes at the top surface using the C
camera mounting bracket fastening screws.
(A Page 21)
C Camera Mounting Bracket Fastening
Screw (2 pcs: M2.6 x 6 mm)
Use screws with a length of 6 mm. Screws
beyond the specified length must not be used as
doing so may damage the interior.
D Anti-rotation Hole
I [BF LOCK] Back Focus Fastening Screw
Use this anti-rotation hole to mount the camera
firmly.
This is the fastening screw for the back focus
adjustment unit. (A Page 23)
E Camera Mounting Screw Holes
J Inner Tripod Base Screw Hole (1/4-20UNC)
(1/4-20UNC)
Use this hole when mounting this product to a
fixer or rotating platform.
Use this hole when mounting this product to a
miniature housing.
You can mount to the housing through this hole
directly without using the H camera mounting
bracket. (A Page 22)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Side
KL
MONITOR OUT
PAL OFF NTSC
RESET
STATUS
IRIS
N M
K [MONITOR OUT] Monitor Output Selection
Note:
Switch
You can adjust the [LED State] settings via the
Use this switch to select the availability of output
from the O [MONITOR OUT] terminal as well as
the signal system.
network to turn off the indicator after startup is
complete. (A Page 71)
NTSC : Outputs NTSC signals.
OFF : No output. Select this value when
distributing images to the network.
PAL : Outputs PAL signals.
[Default setting: OFF]
Caution:
● Images are not distributed to the network
when ANTSCB or APALB is selected.
● When the switch is changed, press the L
Reset button to reboot the unit.
L [RESET] Reset Button
This is a button for rebooting the camera. Press
this button and release within 5 seconds to
reboot the camera.
It takes about one minute for the camera to
reboot. During startup, the [RESET] button is
disabled.
Note:
Pressing the [RESET] button for 5 seconds or
longer switches the camera to the service
verification mode. Do not press the button for 5
seconds or longer.
M [IRIS] Iris Terminal
Use this terminal to connect the DC iris lens.
(Connection with the video iris lens is not
possible.)
(A Page 16)
N [STATUS] Status Indicator
This status of this product is indicated in green
or orange color.
Starting up: Lights up in orange
Startup complete: Lights up in green
Error: Blinks in orange
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Rear
VN-V26U
VN-V25U
R
1
R
1
Q
2
Q
2
2
2
G
2
1
1
G
2
1
1
AC24V
AC24V
ALARM
ALARM
S
S
T
MONITOR
OUT
MONITOR
OUT
AUDIO OUT
10BASE-T/
100BASE-TX
10BASE-T/
100BASE-TX
SEE INSTRUCTION MANUAL
SEE INSTRUCTION MANUAL
CAUTION: NEVER USE PoE AND AC 24V AT THE SAME TIME
CAUTION: NEVER USE PoE AND AC 24V AT THE SAME TIME
DO NOT CONNECT TO THE TELEPHONE NETWORK
DO NOT CONNECT TO THE TELEPHONE NETWORK
PUSH
PUSH
O
O P
P
O [MONITOR OUT] Monitor Video Signal
(M3 x 6 mm)
Output Terminal (RCA)
This is an output terminal for composite video
signals (1 V (p-p), output impedance of 75 K).
Use this terminal to connect to devices such as a
video monitor.
This terminal is used for adjusting the camera
angle during installation. (A Page 19)
Use this screw to mount the fall prevention wire.
(A
Page 21)
T [AUDIO OUT] Audio signal output terminal
(mini jack R3.5 mono) (VN-V26U only)
Outputs audio (analog) received from a
computer.
Does not output audio from the F built-in-
microphone.
Note:
● Use the K [MONITOR OUT] switch to select
the availability of output as well as the signal
system. When the switch is changed, press
the L Reset button to reboot the unit.
● When using the [MONITOR OUT] output, set
P [10BASE-T/100BASE-TX]
Use this terminal to connect to the network via a
LAN cable.
This product supports PoE (IEEE802.3af) and
PoE: class 2 (VN-V25U)
class 0 (VN-V26U)
(A Page 17)(A Page 19)
Q [ALARM INPUT/OUTPUT] Alarm Input/
Output Terminals
Use these terminals to connect to an external
alarm device.
(A Page 20)
R [AC24V] Power Input Terminal
Use this terminal to connect to an AC 24 V,
50/60 Hz power supply.
(A Page 17)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Surveillance via Dual Stream
Features
Simultaneous distribution of JPEG and MPEG4
images enables real-time surveillance using
MPEG4 (30 fps) and recording of JPEG images
at the same time. You can also lengthen the
recording time by lowering the frame rate,
resolution, and picture quality settings for JPEG
images.
Surveillance Using the Built-in Viewer
VN-V25U/26U comes with a built-in ActiveX
JPEG Viewer and MPEG4 Viewer.
JPEG images and MPEG4 images of
VN-V25U/26U can be monitored using the
computer by installing this built-in viewer on the
computer. JPEG images that are currently
displayed can also be captured in the
computer’s hard disk.
Real-time Surveillance
Using MPEG4
VN-V25U/26U
MAC address
For VN-V26U, you can check the audio of the
built-in microphone using the computer.
AOperation of Built-in ViewerB (A Page 79)
VN-V25U/26U
Computer
MAC address
Network
Storage Device
Recording JPEG Images
Saving JPEG images to the FTP server
at regular intervals
VN-V25U/26U accepts requests from 20 clients
at maximum.
JPEG images may be uploaded to the FTP
server at regular intervals.
AFTPB (A Page 53)
Monitoring via Multicast
Multicast enables monitoring of JPEG and
MPEG4 images on multiple computers.
For VN-V26U, you can check the audio of the
built-in microphone using the computer.
AStreaming PageB (A Page 64)
VN-V25U/26U
MAC address
AJPEG Viewer ConfigurationB (A Page 84)
AOperationB (A Page 90)
Network
VN-V25U/26U
Computer
Uploads the latest JPEG
MAC address
images to the FTP server
Computer
at regular intervals
IGMP-
Compliant
Network
Computer
Computer
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Sending audio to the network (VN-V26U
only)
Alarm
VN-V25U/26U comes with a motion detection
feature and dual alarm input.
By motion detection or alarm input, actions such
as mail delivery, message transmission via TCP/
UDP, alarm output can be triggered. These
actions can also be triggered by combination of
two alarm inputs.
Sends out audio picked up using the built-in
microphone of VN-V26U to computers.
VN-V26U
Headset
MAC address
Installing an FTP server enables uploading of
JPEG images before and after the alarm input
time (pre-/post-recording) to the server.
AAlarm PageB (A Page 47)
Built-in
mike
AJPEG Viewer ConfigurationB (A Page 84)
Network
Alarm Device
VN-V25U/26U
Computer
MAC address
Receiving and outputting audio from
the computer via the network (VN-V26U
only)
Network
Receives audio that is input to a computer, and
outputs the audio to a speaker that is connected
to [AUDIO OUT] terminal of VN-V26U.
Computer
Sending JPEG images
before and after alarm
input to FTP
Speaker with
amplifier
Restrictions on Clients
Headset
VN-V26U
VN-V25U/26U enables users to authorize or
reject the acquisition of images by specific IP
address.
MAC address
(A
Page 66)
Control via customized application
software
Network
Computer
The following uses are also possible by
developing a customized application software
that supports the API of VN-V25U/26U.
For details, please refer to AAPI GuideB in the
supplied CD-ROM.
● Monitors via the computer while at the same
time records images to the HDD of the
computer.
Note:
● Use of a headset for audio input/output of the
computer is recommended to prevent
howling.
● Performs recording by changing the frame
size/frame rate during alarm occurrence.
● Records the type and time of alarm
occurrence on the computer.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Procedures
Step 1 Connection/Installation (
A
Page 17)
Connect the lens mount, power supply cord,
LAN cable and alarm.
Next, mount the camera to the ceiling.
Remember also to mount the fall prevention
wire. After the camera is mounted, connect the
video monitor to the [MONITOR OUT] terminal
at the rear of the unit, followed by adjusting the
camera angle.
You can select the video signals of the
[MONITOR OUT] terminal using the
[MONITOR OUT] switch. (
(Back focus adjustment
([MONITOR OUT] switch
A
A
A
NTSC
Page 23)
Page 11)
B
or APALB)
T After adjusting the camera angle using the
[MONITOR OUT] terminal, set the
[MONITOR OUT] switch to AOFFB. Images
are not distributed to the network when
ANTSCB or APALB is selected. After changing
the [MONITOR OUT] switch setting, press
the Reset button to reboot the camera.
G
Step 2 Network settings (A Page 27)
Configure the network settings of the
computer and this camera.
T In a system where multiple units of VN-V25U/
26U are used, turn on the power of only one
unit to configure the IP address settings
using the Internet Explorer. Upon doing so,
turn on the power of the second unit and
configure accordingly. Configure the settings
for the other cameras using the same
procedure.
G
Step 3 Configuring settings using the
Internet Explorer (A Page 33)
Configure the picture quality and alarm
settings using the Internet Explorer.
G
Step 4 Operating the built-in viewer
(A Page 79)
The built-in viewers enable you to monitor
JPEG and MPEG4 images and save JPEG
images.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection / Installation
2.Turn the lens in the clockwise direction to
mount it to the camera firmly
Mounting the Lens
1.Check the mounting method of the lens to
3.When using a DC iris lens, pay attention
to the pin position before connecting the
lens cable
be used before mounting
● The default method used for this camera is
CS mount. To use a C mount lens, loosen the
back focus fastening screw using a
screwdriver, followed by turning the back
focus adjustment ring using a finger or
pointed object (e.g., screwdriver, etc.) to
change the mount method.
2.
MONITOR OUT
PAL OFF NTSC
RESET
STATUS
● Make use of the values listed in the table
below for the dimensions of the lens mount
(a) indicated in the following diagram.
IIS
3.
1
2
3
4
Lens
Flange Focus (b) Dimension (a)
C Mount
Lens
17.526 mm
VN-V25U: 10
mm and below
VN-V26U: 5.5
mm and below
4.Pin Plug
CS Mount
Lens
12.5 mm
5.5 mm and
below
● Objects longer than the dimension (a) must
not be used as doing so may damage the
camera interior or prevent the lens from
being properly mounted, hence resulting in
malfunctions.
3
1
4
2
DC Iris Lens
(Without Built-in EE Amplifier)
Pin No.
Loosen
1
2
3
4
Damping (-)
Back Focus Fastening
Screw (M2.6)
Damping (+)
(a)
F
Driving (+)
Driving (-)
(b)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Connection
MONITOR OUT
PAL OFF NTSC
RESET
Electricity can be supplied to this product either
by connecting to the AC 24 V power supply or
using the PoE (A Page 18).
STATUS
ⅷ
When power is supplied to this product, the
[STATUS] indicator at the side lights up. The
indicator lights up in orange color during
startup, and switches to green color after
startup is complete.
IRIS
You can select not to light up the [STATUS]
Status Indicator
indicator when the unit is running. (
A
Page 71)
ⅷ Power cord
Caution:
● To prevent misconnection and detachment of
cords, use a lug plate to connect the cord to
the terminal.
● When a two-core VVF (vinyl insulated vinyl
sheath cable) is used, the connection
distance is as follows. (Reference value)
●
Make sure to select only one mode of electrical
supply. Connecting the power cord and the
LAN cable for the PoE at the same time may
result in failure or malfunction of the camera.
● Be sure to use an AC 24 V supply that is
isolated from the primary power supply
circuit. Using a variable voltage power supply
will cause the camera and system to
malfunction or breakdown.
Conductor Diameter
(AWG No.)
R
1.0mm
R
1.6mm
R2.0mm
(18) and (14) and (12) and
above
above
400 m
240 m
above
630 m
370 m
Maximum VN-V25U 150 m
Connecting to the AC 24 V power
supply
Extension
VN-V26U 90 m
Connect this product to the AC 24 V power
supply when the PoE is not used.
Warning
Caution:
The rated power of this product is AC 24 V,
50 Hz/60 Hz. Make sure to use it with the
correct voltage.
Use an AC 24 V supply that is isolated from
the primary power supply.
●
Make sure to select only one mode of electrical
supply. Connecting the power cord and the
LAN cable for the PoE at the same time may
result in failure or malfunction of the camera.
● The unit is to be powered by an AC 24 V
power supply.
The AC 24 V power supply should conform to
the following: Class 2 only (For USA),
Isolated power supply only (For Europe and
others).
Supplying a power beyond the rated value
may result in failures, smoke or fire. When the
camera breaks down, turn off the power and
contact our service center immediately.
When a power beyond the rated value is
supplied, the internal components may be
damaged even if no abnormality is found on
the appearance and operation of the camera.
Please contact our service center immediately
for servicing (charged separately).
To Power
Supply
Note:
●
After DHCP timeout, all IP addresses of
VN-V25U/26Us are set to 192.168.0.2 by default.
When the power of multiple cameras within the
same LAN environment are turned on at the
same time, the IP address of the cameras
overlap, thus preventing proper access. As such,
make sure to turn on the power of the cameras
one by one.
1
2
G
2
1
2
1
AC24V
ALARM
MONITOR
OUT
10BASE-T/
100BASE-TX
SEE INSTRUCTION MANUAL
CAUTION:
NEVER USE PoE AND AC 24V AT THE SAME TIME
DO NOT CONNECT TO THE TELEPHONE NETWORK
PUSH
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection / Installation
● In a system where multiple units of VN-V25U/
26U are used, turn on the power of only one
unit to configure the IP address settings
using the Internet Explorer. Upon doing so,
turn on the power of the second unit and
configure accordingly. Configure the camera
settings using the same procedure.
● When overlapping of the IP address occurs,
check to ensure that there is only one
VN-V25U/26U unit within the same LAN
environment, and wait for a while (at least 10
minutes) or power off and on all network
devices under the same LAN environment.
Otherwise, access to VN-V25U/26U may fail.
Using the PoE
Connect to a device that supports PoE to supply
electricity from the LAN cable.
1
2
G
2
1
2
1
AC24V
ALARM
MONITOR
OUT
10BAS-T/
100BAE-TX
SEE INSTRUCTION MANUAL
CAUTION:
NEVER USE PoE AND AC 24V AT HE SAME TIME
DO NOT CONNECT TO THE TELEPHONE NETWORK
PUSH
Connect to PoE-
compatible device
Note:
● For details on the connection method and
cable type, please refer to ALAN Cable
ConnectionB (A Page 19).
What is PoE (Power over Ethernet)?
This is a function that enables operation of a
LAN equipment without a power cable by
supplying power simultaneously with the data
using a LAN cable.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
LAN Cable Connection
Connect the camera to a hub or computer using
a LAN cable.
Monitor Signal Output Terminal
Connection
This terminal is used for adjusting the camera
angle during installation. Connect it to devices such
as a video monitor using a video cable (RCA).
Cable to use
● Shielded cable
● Length of 100 m or shorter
G
2
1
2
1
Ⅵ When connecting to a hub
Make use of a straight cable.
AC24V
ALARM
Ⅵ When connecting to a computer
Make use of a cross cable.
MONTOR
OUT
10BASE-T/
100BASE-TX
SEE INSTRUCTION MANAL
CAUTION: NEVER UE PoE AND AC 24V AT THE SAME TIME
DO NOT CONNECT TO TE TELEPHONE NETWORK
PUSH
G
2
1
2
1
AC24V
ALARM
MONITOR
O
U
T
10BASE-T/
100BAE-TX
SEE INSTRUCTION MANUAL
CAUTION:
NEVER USE
PoE
AC 24V AT
AND THE SAME TIME
DO NOT CONNECT TO THE TELEPHONE NETWORK
Caution:
PUSH
● A longer cable extension distance causes
signals to be attenuated, image resolution to
deteriorate and noise to increase.
Note:
●
Select the signal system for the monitor output
using the [MONITOR OUT] switch at the side of
Caution:
this product. (
After adjusting the camera angle, set the switch
to OFF . After changing the switch settings,
press the Reset button to reboot the camera.
A
NTSC
B
or
APALB)
● However, cross cables cannot be used with
some computer models. When connecting
VN-V25U/26U directly to a computer, check
the computer’s LAN specifications in
advance.
A
B
Connecting the audio signal
Note:
output terminal (VN-V26U only
)
● Make use of a Category 5 (or higher) cable
when 100BASE-TX is used.
Connect to the speakers with a built-in amplifier,
etc. using mini jack (R3.5 mono) cable.
● To distribute images to the network, set the
[MONITOR OUT] switch at the side of this
product to AOFFB.
1
2
G
2
1
2
1
[MONITOR OUT] Switch
AC24V
ALARM
MONITOR OUT
PAL OFF NTSC
RESET
MONITOR
OUT
AUO OUT
10BASE-T/
100BASE-TX
SEE INSTRUCTION MANUAL
STATUS
CAUTION: NEVER USE PoE AND AC 24V AT THE SAME TIME
DO NOT CONNECT TO THE TELEPHONE NETWORK
PUSH
IRIS
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection / Installation
Sensor Example
(1)
VN-V25U/26U
Alarm Input/Output Terminal
Connection
Connect the alarm input/output terminals with
external devices, such as a sensor or buzzer.
Plug/Unplug the cable while pressing the button
as shown in the diagram below.
DC3.3 V
INPUT 1 or
2 Terminal
VCC
R
R
OUT
GND
3.3 V
1 mA
G Terminal
(Alarm Input Equivalent Circuit)
Cable to use
● Shielded cable
● Length of 50 m or shorter
Sensor Example
(2)
Relay Switch, etc.
OUT
GND
1
2
G
2
1
2
1
AC24V
ALARM
Alarm Output Terminal
Connect this terminal to annunciating devices,
such as annunciators, indicators, lights, or
buzzers.
Ⅵ Output requirements
MONITOR
OUT
10BASE-T/
100BASE-TX
SEE INSTRUCTION MANUAL
CAUTION:
NEVER USE PoE AC 24V AT THE SAME TIME
DO NOT CONNECT TO THE TELEPNETWORK
PUSH
● Equivalent to NPN open collector output (Set
the output logic using the Internet Explorer)
● Allowable applied voltage: DC12 V and below
● Allowable inflow current: 50 mA
●
Momentary (100 ms - 5000 ms) output
(Set time using the Internet Explorer
(A Page 52))
Push
Annunciating
Device Example
DC 12 V
R
VN-V25U/26U
Caution:
OUTPUT 1
or 2 Terminal
● Noises from an external source may cause
the camera to malfunction even when the
cable used is within 50 m. In this case, move
the cable away from the noise source.
IN
Alarm Input Terminal
Connect this terminal to sensor devices, such as
an infrared sensor, door sensor, metal sensor or
manual switch.
G Terminal
GND
(Alarm Output Equivalent Circuit)
Ⅵ Input requirements
Caution:
● No-voltage relay NPN open collector input
● Polarity of input detection can be selected
using a software
● Connect the G terminal of this camera to the
GND terminal of the annunciating device or
alarm input sensor.
● Make/Break (500 ms and above)
● Circuit current at low level: 1 mA
● Applied voltage at high level: 3.3 V
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Ⅵ Mounting the camera mounting
Mounting the Camera
bracket on the top of the camera
Use the screw hole on the camera mounting
bracket to mount this camera to a fixer or
rotating platform.
Camera
Mounting
Bracket
Camera
Mounting
Camera Mounting
Screw Hole
Bracket Fastening Screw
1/4-20UNC
(2 pcs: M2.6 x 6 mm)
Caution:
● When mounting the camera, use screws with
a length between 5 mm to 7 mm from the
mounting surface. Screws beyond the
specified length may damage the interior,
while those shorter than specified may cause
the camera to fall off, and therefore these
must not be used.
Camera
Anti-rotation Hole
Mounting
Bracket
Fall
Prevention
Wire
1/4-20UNC
5 mm and
above
7 mm and
below
M3x6 mm
(15/64 inch)
6 mm
2 mm and below
Caution:
● The camera mounting bracket is mounted on
the bottom surface of the camera by default.
To mount it to the top surface, do so by
removing the two fastening screws from the
camera mounting bracket. Make sure to
fasten the screws firmly.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection / Installation
Warning
Mounting to the Housing
Using the Inner Tripod Base
● Special attention is required when mounting
the camera to a wall or ceiling. Users
should get professional contractors to
perform mounting operations instead of
doing it themselves. Failure to do so may
cause the camera to fall off and result in
injuries or accidents.
● When mounting the camera to a fixer or
rotating platform, ensure that the camera is
firmly mounted by using the anti-rotation
holes to prevent it from falling off.
This product comes with an inner tripod base at
the bottom surface. You can use the inner tripod
base by removing the camera mounting bracket
that is attached to the bottom surface. Mount this
product to the miniature housing using the screw
hole of the inner tripod base.
● To prevent the camera from falling off,
ensure that it is connected to a firm place
(ceiling slab or channel) using a fall
prevention wire.
● Pay also careful attention to the length,
strength, wiring, and material (insulating
properties) of the fall prevention wire to be
used. The length used should be as short
as possible within the permissible range of
the mounting length. The wire should be
strong enough to withstand the total weight
of this product and the fixer. (Pay also
attention to the finishing at the end of the
wire.)
Inner Tripod Base
● Mount the fall prevention wire using the
black screw at the rear of the camera unit.
● Designated screw for fastening of fall
prevention wire (M3 x 6 mm): Screws
beyond the specified length must not be
used as doing so may damage the interior.
Camera Mounting
Bracket
Remove the screws for the bracket (2 pcs)
Bottom Surface
Inner Tripod Base Screw Hole (1/4-20UNC)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Inner Tripod Base Mounting Screw
Fixed focus lens
Make use of 1/4-20UNC screw. The length of
the mounting screw shall be between 6 mm to
7 mm from the mounting surface.
Caution:
● Using a screw with a length longer than
specified may damage the internal parts of
the camera, while using a length shorter than
specified may cause the camera to fall off.
Use a washer to adjust the length from the
mounting surface.
Adjust when the lens cannot be brought into
focus using the focus ring.
1.Loosen the back focus fastening screw by
using a Phillips screwdriver and turning it in
the anti-clockwise direction
2.Shoot the object or a fine pattern that is
farther away than the object
3.Set the focus ring of the lens to ∞
4.Turn the back focus adjustment ring to obtain
Max. 7 mm
(17/64 inch)
a sharp focus
Min. 6 mm
Mounting Plate
Washer
(15/64 inch)
5.Tighten the back focus fastening screw by
turning it in the clockwise direction, and
ensure that it is securely fastened
Zoom lens
Perform the zooming operation (Tele - Wide)
and adjust accordingly if it is out of focus.
Back Focus Adjustment
1.Loosen the back focus fastening screw by
using a screwdriver and turning it in the anti-
clockwise direction
The CS mount is adjusted to the widest point of
the applicable range by default. When using the
zoom lens or C mount lens, or when the lens
remains out of focus upon using the focus ring,
readjustment is required.
2.Shoot the object or a fine pattern that is
farther away than the object
3.Set the zoom lens to Tele and turn the lens
● Follow the method below when necessary to
adjust the back focus.
focus ring to adjust the focus
● In order to adjust the back focus accurately,
do so according to the steps below upon
opening the lens iris using the iris adjustment
and ND filter.
(ND filter is a filter that is used to evenly
reduce the amount of light entering the lens
at all wavelengths.)
● Connect a video monitor to the [MONITOR
OUT] terminal at the rear of the unit, followed
by adjusting as follows.
4.Set the zoom lens to Wide and turn the back
focus adjustment ring to adjust the focus
5.Repeat Steps 3. and 4. for two to three times
6.Tighten the back focus fastening screw by
turning it in the clockwise direction, and
ensure that it is securely fastened
Back Focus Adjustment Ring
Tighten
Loosen
Back Focus Fastening
Screw (M2.6)
Lens Focus Ring
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection / Installation
For example, when 10 fps is requested by two
clients, and in addition, multicast is transmitted
at a rate of 10 fps, the total frame rate will be:
Network Requirements
●
Ensure that there is sufficient network
bandwidth for the data volume to be sent out
by VN-V25U/26U. Do not send multicast
stream that exceeds the bandwidth. If the
entire bandwidth is used by the multicast
stream, control of this camera via the network
may fail.
10 + 10 + 10 = 30 fps
If the JPEG file size per frame is 30 KB, then the
total bit rate will be:
30 KB x 30 fps = 900 KB/s = Approx. 7.2 Mbps
Bit Rate of MPEG4 Stream
●
●
Data volume to be sent by VN-V25U/26U varies
with the settings and number of distributions.
The maximum bit rate for transmission is
about 20 Mbps.
You can select either the Variable Bit Rate
(VBR) or Constant Bit Rate (CBR) system for
MPEG4 stream.
When the VBR system is selected, the bit rate
varies according to the condition of the input video
signals. The VBR system delivers a stable picture
quality, but forecast of the bit rate is difficult.
When the CBR system is selected, encoding is
performed at a fixed bit rate regardless of the
condition of the input video signals. The picture
quality varies under the CBR system, but the bit
rate can be easily forecast.
Estimation of Total Bit Rate
The total JPEG bit rate from VN-V25U/26U is
determined by the VN-V25U/26U settings,
number of clients, and the client’s requested
number of frames. The total MPEG4 bit rate
from VN-V25U/26U is determined by the number
of distributions. Develop a design upon taking
the above into consideration.
You can specify an estimated bit rate for both
VBR and CBR. (64 kbps - 8000 kbps)
Bit Rate of JPEG Stream
The JPEG file size per frame varies with the
encoding settings as well as input video signals.
The following table may be used as a reference.
When VFS is selected, the quantization table
during JPEG encoding will be maintained, and the
file size will increase/decrease according to the
input signals. When AFS is selected, encoding will
be performed such that the target file size is the
average size of multiple JPEG images.
Bit Rate of Audio (VN-V26U only)
Up to 2 audio data streams can be sent by VN-
V26U.
Only 1 audio data stream can be recieved. Data
volume for 1 audio stream is 64 kbps. Audio data
volume may be calculated using the following
formula.
64 kbps x no. of streams
The number of streams is the total number of
streams sent via TCP (number of clients), streams
sent via multicast, and stream received by
Picture Quality
Control Method
VGA File QVGA File
Size
Size
VN-V26U
.
VFS
(Variable
File Size)
1 (High)
80 KB
60 KB
40 KB
27 KB
20 KB
13 KB
10 KB
8 KB
(Example)
When VN-V26U sends out 2 audio streams and
receives 1 audio stream, data volume will be as
follows.
2
3
64 kbps x 3 = 192 kbps
4 (Medium) 30 KB
5
25 KB
20 KB
15 KB
6
7 KB
7 (Low)
5 KB
Selectable Selectable
AFS
between
10 KB -
100 KB
between
3 KB -
33 KB
(Average File Size)
The maximum number of distributions varies
with the bit rate settings as well as the client’s
requested frame rate. Up to 20 streams can be
distributed (including multicast). The total frame
rate refers to the sum of these frame rates.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
When both JPEG and MPEG4 images are
distributed simultaneously, distribution up to two
clients for JPEG and MPEG4 respectively is
possible. However, distribution requests that
exceed a total bit rate of 20 Mbps will be denied.
Restrictions on the Number of
Distributions for VN-V25U/26U
The maximum number of distributions for
VN-V25U/26U is determined by the settings as
well as requirements from the client.
Maximum
number of
Maximum
number of
Total bit
rate
distributions distributions
When only JPEG images are distributed, the
maximum number of distributions is determined
based on the highest bit rate within the stream.
When a distribution request that exceeds the
maximum number of distributions is received,
this request is denied. For example, if Client A
requests for and receives data at 1 Mbps, while
Client B requests for and receives data at
5 Mbps, the maximum number of distributions is
4 streams according to the table below.
for JPEG
for MPEG4
20 Mbps and
below
2
2
Insufficient network bandwidth
When there is insufficient bandwidth, the
number of JPEG frames (frame rate) that the
client can acquire will decrease. Delay will also
occur in the distribution of images. In the case of
MPEG4, noise interference may occur and
playback may fail.
Maximum number of distributions when only
JPEG data is distributed
Distribution
atmaximum
bit rate
Maximum
number of
distributions
Total
maximum bit
rate
There may be a longer delay or interruption in
the audio.
1 Mbps and
below
20
4
20 Mbps
20 Mbps
20 Mbps
Network Delay
When the client acquires JPEG via TCP,
VN-V25U/26U will send out data while checking
the ACK from the client at the same time. For
networks with considerable delay, data cannot
be sent out until ACK is received, and therefore
the frame rate will drop. In the case of MPEG4,
noise interference may occur and playback may
fail.
5 Mbps and
below
10 Mbps and
below
2
Larger than
10 Mbps
1
Maximum
configurable
value
Audio may be interrupted.
Decrease in the frame rate due to network delays
can be eliminated by receiving data via multicast.
(24 Mbps)
When only MPEG4 images are distributed, the
maximum number of distributions is determined
by the preset bit rate. When a distribution
Network Jitter
When there is considerable network jitter, delay
time may be prolonged and the image frame rate
may drop. In the case of MPEG4, noise
interference may occur and playback may fail.
Audio may be interrupted.
request that exceeds the maximum number of
distributions is received, this request is denied.
When distributing only MPEG4 data
Maximum
number of
distributions
Total
maximum bit
rate
Preset bit
rate
Packet Loss
When acquiring images from VN-V25U/26U via
TCP, packet loss may be recovered by TCP
transmission. When there is considerable delay
in the network, however, missing data may occur
and the image frame rate may drop. In the case
of MPEG4, noise interference may occur and
playback may fail.
0.6 Mbps
20
4
12 Mbps
12 Mbps
12 Mbps
and below
3 Mbps and
below
6 Mbps and
below
2
Audio may be interrupted.
Larger than
6 Mbps
1
Maximum
configurable
value (8
When packet loss occurs during multicast
sending from VN-V25U/26U, the image frame
rate may drop. In the case of MPEG4, noise
interference may occur and playback may fail.
Audio may be interrupted.
Mbps)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection / Installation
Network Requirements
(continued)
List of Protocols and Port Numbers
Used by VN-V25U/26U
VN-V25U/26U uses the protocols and port
numbers listed below. Ensure that these ports
are allowed through the firewall when a firewall
is to be installed.
Protocol/Port No.
Source
Purpose of Use
TCP/80
JPEG/MPEG4
acquisition, Web
Settings page, API,
Sending/Receiving
audio (VN-V26U
only)
TCP/10020
TCP/10021
TCP/10023
(Reserved for
adjustment)
TCP/32040
Destination
TCP/20, 21
TCP/25
Alarm server
FTP
Mail delivery
POP (Mail Delivery)
TCP/110
TCP/User Setting No. Sending alarm
UDP/123 SNTP
UDP/User Setting No. Sending alarm
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Settings
Ⅵ (B) Assigning a static IP address
IP Address Settings
ⅷ System configuration required for setting
IP address
Setting the IP address for VN-V25U/26U
The default setting for VN-V25U/26U is ADHCP
EnableB (DHCP client feature is turned on).
Upon starting up in LAN without DHCP server,
VN-V25U/26U starts running with the following
IP address after time out of DHCP.
There are two methods to set the IP address for
VN-V25U/26U as follows.
(A) Assigning an IP address to VN-V25U/26U
from the DHCP server
IP address
: 192.168.0.2
(B) Assigning a static IP address to VN-V25U/
26U
Subnet mask
: 255.255.255.0
Default gateway : Nil
Ⅵ (A) Assigning an IP address from the
Note:
DHCP server
● To set a static IP address for VN-V25U/26U,
connect VN-V25U/26U, the switching hub
and the computer for setting using a straight
LAN cable of Category 5 and above.
● VN-V25U/26U is set to ADHCP EnableB (the
DHCP client feature is on) by default. To
assign an IP address from the DHCP server,
connect VN-V25U/26U to LAN with DHCP
server, and turn on VN-V25U/26U. Allowing
the DHCP server to assign the same IP
address to VN-V25U/26U every time eases
access to VN-V25U/26U.
ⅷ Set up the computer for setting the IP
address.
● Minimum computer specifications for
setting
● For details on IP addresses assigned to
VN-V25U/26U, consult your network
administrator.
OS
: Windows XP (Professional or
Home Edition) (SP2)
You can look up the IP address of VN-V25U/
26U using the search tool in the supplied
CD-ROM.
Web browser : Internet Explorer
Version 6.0
For details, please refer to AReadmeB file in
the CD-ROM.
Caution:
● Set the DHCP server such that the same IP
address is always assigned to the MAC
address of VN-V25U/26U by the DHCP
server. Connection may fail if the above
setting is not performed.
Caution:
● When setting the IP address for VN-V25U/
26U, do so by using a network that is made
up only of VN-V25U/26U, the computer for
setting and the switching hub.
● Using a hub connected to other network
devices or networks via a LAN cable for
setting can cause problems.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Settings
IP Address Settings
(continued)
ⅷ IP address setting at the computer
Set the computer to an IP address that enables communication with VN-V25U/26U.
1.Click [Start]
● Select in the sequence of [Control Panel]-[Network Connection]-[Local Area].
2.The computer on which Internet Explorer is launched automatically selects the connected
network
● Right-click and select [Properties].
● Check to ensure that the [Client for Microsoft Networks] and [Internet Protocol(TCP/IP)] check
boxes are selected.
3.Select [Internet Protocol(TCP/IP)] and click [Properties]
4.Set the IP address
Select [Use the following IP address].
A
B
Specify the [IP address]. (For example,
use 192.168.0.100 when VN-V25U/
26U is in its default settings and there
is no DHCP server)
Note:
Make sure that you take note of the
original IP address before altering.
Caution:
Ensure that a duplicate IP address is
not specified within the same network
environment.
C
Set [Subnet Mask] to a value that is
appropriate for the setting operation.
Consult the network administrator if
you have any queries.
(Use 255.255.255.0 when VN-V25U/
26U is in its default settings and there
is no DHCP server)
D
E
When a [Default Gateway] is present,
make use of the corresponding IP
address (e.g., 192.168.0.254).
Click [OK].
5.Click [OK] on the ALocal Area Connection PropertiesB screen
28
Download from Www.Somanuals.com. All Manuals Search And Download.
ⅷ Changing the IP address using the Internet Explorer
1.Launch the Internet Explorer on the computer
2.When proxy settings are enabled in the Internet Explorer, follow the steps below to disable
the proxy of the Internet Explorer
● Select in the order of [Tool]-[Internet Options]-[Connections]-[LAN Setting], followed by
deselecting the check for [Use a proxy server for your LAN] under [Proxy Server] of the [Local
Area Network (LAN) Settings] window.
Deselect the check
3. If the active script of the Internet Explorer is disabled, follow the steps below to enable it
● Select [Trusted sites] under [Tool]-[Internet Options]-[Security]. Upon doing so, the [Sites…]
button directly below becomes active. Click this button and deselect the check in the displayed
window, and add the following web site to the zone.
http://192.168.0.2
● Next, select [Trusted sites] under [Tool]-[Internet Options]-[Security], and press the [Custom
Level] button. Select [Enable] under [Scripting]-[Alarm] of the [Security Settings] window that
has been opened.
Select [Enable]
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Settings
IP Address Settings
(continued)
ⅷ Changing the IP address using the Internet Explorer (continued)
4.Launch the Internet Explorer
Click [Go].
Enter the following IP address into the address field.
http://192.168.0.2
B
A
Note:
● If the proxy server settings for access to the Internet via the Internet Explorer is enabled, you may
not be able to specify the IP address directly. In this case, change the proxy settings of the Internet
Explorer.
● After the [Security Settings] screen appears, press the [OK] button to proceed.
5.Enter the user name and password (login as administrator)
Enter the user name.
This is set to AadminB by default.
A
VN-V25
B Enter the password.
This is set to Avn-v2xB by default.
C
Click [OK].
30
Download from Www.Somanuals.com. All Manuals Search And Download.
6.The top page of VN-V25U/26U appears
Click on [Network], followed by [Basic]
on the next submenu.
7.The [Basic] page with the IP address settings appears when DHCP is not in use
A
Set the [IP Setting] item to [DHCP
Disable].
B
Enter the values you wish to specify in
the [IP Address], [Subnet Mask] and
[Default Gateway] fields.
Click [OK].
C
A confirmation screen appears. Press the [OK] button. VN-V25U/26U restarts using the new IP
address. It takes about one minute for the camera to reboot.
Note:
● Access from this computer may fail when the IP address of VN-V25U/26U is changed. To enable
access to VN-V25U/26U from the same computer, alter the IP address at the computer accordingly.
When the display or configuration of the opened screen appears strange, check
using the following procedures.
A Click [Start]-[Control Panel]-[Display] and open the [Display Properties] window
B Click the [Settings] tab in the [Display Properties] windows and click the [Advanced] button
C Check that [DPI setting] in the [General] tab has become [Normal size(96DPI)]
D Otherwise, change the setting to [Normal size(96DPI)] andreboot windows
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Settings
IP Address Settings
(continued)
When the IP address of VN-V25U/26U is
known
When the IP address of VN-V25U/26U is known,
it can be changed by accessing the built-in web
page of VN-V25U/26U via the Internet Explorer
on the computer.
Refer to ASetting Using Internet ExplorerB
(A Page 33).
When the IP address of VN-V25U/26U is
unknown
IP address settings cannot be changed by
accessing via a computer when the IP address of
VN-V25U/26U is unknown.
In this case, you can obtain information on the IP
address using the following method.
● The supplied CD-ROM comes with a search
tool. You can use this tool to search for
information on VN-V25U/26U within the LAN.
For details on the search tool, please refer to
the AReadmeB file in the supplied CD-ROM.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setup
I1n.teLranuentchExthpeloInrteerrnSeettEuxpplorer on the computer
2.When proxy settings are enabled in the Internet Explorer, follow the steps below to disable
the proxy of the Internet Explorer
● Select in the order of [Tool]-[Internet Options]-[Connections]-[LAN Setting], followed by
deselecting the check for [Use a proxy server for your LAN] in [Proxy Server] of the [Local Area
Network (LAN) Settings] window.
Deselect the check
3.If ActiveX controls and plug-ins of the Internet Explorer is disabled, follow the steps below to
enable it
● Click [Trusted sites] under [Tool]-[Internet Options]-[Security]. Click on the [Sites…] button
directly below, followed by deselecting the check in the displayed window. Add the following web
site to the zone.
http://192.168.0.2
● Click [Trusted sites] under [Tool]-[Internet Options]-[Security]. Select the [Custom Level] button
and open the [Security Settings] window. Set all items under [ActiveX controls and plug-ins] in
the opened window to [Enable]. Enable also [Allow Script-initiated window without size or
position constraints.] under [Miscellaneous].
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setup (continued)
Enter user name and password
User name and password entry will be required
at the beginning.
There are three access authorization levels to
VN-V25U/26U. The factory settings are as
follows.
4.Disable pop-up block
Connection of VN-V25U/26U cannot be
established when pop-up block in the Internet
Explorer is set to AEnableB.
Follow the steps below to set the pop-up block to
AdisableB.
● Selecting [Tool]-[Pop-up Blocker]-[Turn Off
Pop-up Blocker] permits all sites.
User
Name
Default
Password
Description
● To allow only specific sites such as
VN-V25U/26U, select [Tool]-[Pop-up
Blocker]-[Turn On Pop-up Blocker], followed
by selecting [Tool]-[Pop-up Blocker]-[Pop-up
Blocker Settings] that becomes active to
open the [Pop-up Blocker Settings] window.
In the opened window, add the address of
VN-V25U/26U as a permitted web site
address.
admin
vn-v2x
All operations and
setting changes are
allowed
operator
vn-v2x
Change of settings
other than those
related to network
and maintenance
are allowed
user
vn-v2x
Viewing of images
is allowed
5.When plug-in tools such as the Yahoo or
Google toolbar are included in the Internet
Explorer, disable the pop-up block
function of these plug-in tools as well
ⅷ Pages that users have access to
Restrictions are placed on the pages that users
have access to. In addition, links on the web
pages are also displayed according to the
access authority of the user.
● admin
Image
[View]
[Camera]
[Encoding]
[Audio] (VN-V26U only)
External
Network
[Alarm]
[Alarm Environment]
[Privacy Mask]
[Motion Detection]
[Basic]
[Details]
[Protocol]
[Streaming]
[Access Restrictions]
[Time]
[Password]
Utility
[Maintenance]
[LED State]
[Miscellaneous]
Status
[Operation]
[Settings]
34
Download from Www.Somanuals.com. All Manuals Search And Download.
● operator
Image
[View]
[Camera]
[Encoding]
[Audio] (VN-V26U only)
External
[Alarm]
[Alarm Environment]
[Privacy Mask]
[Motion Detection]
Network
Utility
[Streaming]
[LED State]
[Miscellaneous]
Status
[Operation]
[Settings]
● user
Image
Utility
[View]
[Miscellaneous]
Note:
● The [Security Settings] screen appears
before the top page is displayed. Press the
[Yes] button to proceed.
If you do not want this warning screen to be
displayed, change the Internet Explorer
settings as follows.
● Open [Tool]-[Internet Options]-[Security]
and select the [Trusted sites] icon.
● Next, press the [Custom Level] button,
followed by selecting AEnableB for
[Miscellaneous]-[Display mixed content].
Caution:
● Do not reset or turn off the power of
VN-V25U/26U immediately after the settings
are changed. Otherwise, changes may not be
saved, and VN-V25U/26U may be restored to
the factory settings.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting
View Page
This top page is displayed upon access using any of the user names AadminB, AoperatorB or AuserB.
The camera image is displayed as a still image.
Links to each page are found at the left end. The links displayed vary according to the user name.
For example, in the case of AadminB or AoperatorB, three links, namely [View], [Camera] and [Encoding]
are displayed upon clicking [Image]. In the case of VN-V26U, 4 links, namely [View], [Camera],
[Encoding], and [Audio] are displayed. In the case of AuserB, only [View] is displayed.
(The diagram below shows the [View] page upon access using AadminB or AoperatorB. The number of
links displayed at the left end decreases during access using AuserB, and [JPEG Viewer] and [MPEG4
Viewer] are not displayed.)
A
C
B
Links to each page
36
Download from Www.Somanuals.com. All Manuals Search And Download.
A ReloadStill Press this button to refresh the displayed still image.
Clicking [View] or re-entering the Internet Explorer address will only display the
page that is temporarily stored in the Internet Explorer, and still images may not be
refreshed.
Image
To refresh still images using the above operations, change the Internet Explorer
settings as follows.
● Open [Tool]-[Internet Options], click the [Settings] button under Temporary
Internet Files, and select AEvery visit to the pageB.
Caution:
● When a firewall is installed between VN-V25U/26U and the computer, still
images may not be displayed on the Image View page of the web browser. For
such systems, check the still images using the built-in viewer. The built-in
viewer supports NAT/NAPT.
B
JPEG
Viewer
This is displayed upon access to the [View] page using AadminB or AoperatorB.
Click this button to display screens such as the [Security Settings] screen. Press
the [OK] or [Yes] button to launch the built-in JPEG viewer.
Do not click on the [JPEG Viewer] button over and over again while leaving the
warning screen unattended.
When this button is clicked for the first time on the operating PC, the built-in JPEG
viewer will be installed on the computer.
Note:
● Refer to AOperation of Built-in ViewerB (A Page 79) on procedures to install the
built-in viewer on the computer and ways to use the built-in viewer.
C
MPEG4
Viewer
This is displayed upon access to the View page using AadminB or AoperatorB.
Click this button to display screens such as the [Security Settings] screen. Press
the [OK] or [Yes] button to launch the built-in MPEG4 viewer.
Do not click on the [MPEG4 Viewer] button over and over again while leaving the
warning screen unattended.
When this button is clicked for the first time on the operating PC, the built-in
MPEG4 viewer will be installed on the computer.
Note:
● Refer to AOperation of Built-in ViewerB (A Page 79) on procedures to install the
built-in viewer on the computer and ways to use the built-in viewer.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Camera Page
This page is for setting the camera’s parameters.
This page can be used during access using AadminB or AoperatorB.
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
● To restore the settings of this page to the factory settings, press [Initialize] button.
A
B
C
D
E
F
G
H
I
J
K
L
M
VN-V26U
L
38
Download from Www.Somanuals.com. All Manuals Search And Download.
A Camera ID
Monitor Type
Character strings entered here will be written to the JPEG comment segment
(item name: camera). Refer to the API Guide on the file formats of JPEG.
B
For selecting the monitor type according to the monitor used to display the
video images. The picture quality varies according to the type of monitor
selected.
Custom
: Enables setting of picture quality according to the user’s
preference.
LCD1, LCD2 : Picture quality setting for LCD monitors. Two types are
available for selection according to the user’s preference.
CRT
: Picture quality setting for CRT (cathode-ray tube) monitors.
[Set values: Custom, LCD1, LCD2, CRT]
C Black Level
For adjusting the black level. Lowering the value darkens the video image.
Increasing the value brightens the image.
[Setting range: 0 ~ 2]
Note:
● If the black level is set to “0”, this may be too low depending on the
monitoring device, or dark area will become complete black.
● When using MPEG4 images, set to either “1” or “2”.
D Gamma
To alter the appearance of dark areas in a video image, adjust the gamma
curve.
Off
: Do not perform gamma correction. The entire image appears
dull.
-3 ~ 3
: Perform gamma correction. When this is set to “0”, standard
gamma correction is performed. Setting to a smaller value
darkens the image, while increasing the value brightens the
image.
[Set values: Off, -3 ~ 0 ~ 3]
Note:
● The set value is fixed when the monitor type is set to ALCD1B, ALCD2B, or
ACRTB.
E Enhance
For setting the type of edge enhancement.
Frequency
Low
: Enhances both thick and thin edges.
High : Enhances thin edges.
[Set values: Low, High]
Note:
● The set value is fixed when the monitor type is set to ALCD1B, ALCD2B, or
ACRTB.
F Enhance Level
G Color Level
For setting the intensity of edge enhancement.
Larger value
: Increases the intensity of edge enhancement.
Smaller value : Decreases the intensity of edge enhancement.
[Setting values: -5 ~ 0 ~ 5]
For adjusting the color level.
Larger value
: Increases the color level.
Smaller value : Decreases the color level.
[Setting values: -5 ~ 0 ~ 5]
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Camera Page (continued)
H AGC
For setting the AGC (automatic gain control) level.
Off
: Disables the AGC feature
Mid
: When the amount of light is insufficient
: When the amount of light is particularly insufficient
High
Super
: When the brightness level is insufficient even upon setting to
High.
[Set values: Off, Mid, High, Super]
Note:
● This feature cannot be configured when the [Easy Day and Night] is set
to AOnB. (VN-V25U)
● [AGC] cannot be set to AOffB or AMidB when the [B&W Mode] settings
are set to AAuto LowB, AAuto MidB or AAuto HighB. (VN-V26U)
● The screen appears grainy at dark locations when the AGC feature is in
use.
I Sense Up
This feature is used to raise the sensitivity level by lengthening the exposure
time.
You can specify the number of times by which the sensitivity level is to be
increased automatically when the object becomes dark. When Ax32B is
selected, the sensitivity is automatically and continuously increased to 32
times of the level when AOffB is selected. When the sensitivity level
increases, the shutter speed slows down, and motion becomes unnatural.
When set to AOffB, [Sense Up] is disabled.
[Set values: Off, x2, x4, x8, x16, x32, x62]
Note:
● Upon raising the sensitivity level, the screen may appear grainy or white,
or white defects may occur. However, this is not a malfunction.
● When [Sense Up] is set to a value other than AOffB, flickers occur under
the light of fluorescent or mercury lamps. This is not a malfunction of the
camera, but is due to principles related to [Sense Up].
● When the shutter is set to a value between 1/50 to 1/10000, set
[Sense Up] to AOffB.
J ALC Priority
For setting the priority of ALC (feature for maintaining the video level
according to the brightness of the object). You can select whether to assign
priority to the motion or picture quality when the object becomes dark.
Motion
: Assigns priority to motion.
When the object becomes dark, priority is given to AGC
(automatic gain control), and therefore this is suitable for
shooting fast-moving objects.
Quality
: Assigns priority to picture quality.
When the object becomes dark, priority is given to the
[Sense Up] feature, and therefore this is suitable for shooting
objects requiring a high picture quality.
[Set values: Motion, Quality]
40
Download from Www.Somanuals.com. All Manuals Search And Download.
K Shutter Speed
For setting the shutter speed.
Auto
: Varies the shutter speed automatically according
to the brightness.
1/30 ~ 1/10000
Flickerless
: Fixed shutter speed.
: Reduces flickers due to fluorescent lamps.
[Set values: Auto, 1/30, 1/50, 1/60, 1/100, 1/250, 1/500,
1/1000, 1/2000, 1/4000, 1/10000, Flickerless]
Note:
● AAutoB is only recommended when using a manual iris lens.
● Flickers may occur when this is set to a value other than A1/50B, A1/100B,
or AFlickerlessB. When AFlickerlessB is selected, flickers may occur when
the [Sense Up] feature is used.
● When [Sense Up] is set to a value other than AOffB, the shutter speed
cannot be set to a value between 1/50 to 1/10000.
L Easy Day and
For setting the Easy Day and Night feature.
When this is set to AOnB, the image turns black-and-white when the
luminance level is low.
Night
(VN-V25U only)
[Set values: Off, On]
L B&W Mode
For specifying whether to switch the image to the black-and-white mode.
Auto mode can be specified for switching automatically to the black-and-
white mode when the luminance level is low. In auto mode one of three
levels can be selected according to the luminance level.
(VN-V26U only)
Color
: Switches to the color mode at all times.
Black&White
Auto Low
: Switches to the black-and-white mode at all times.
: Switches to the black-and-white mode when the
luminance of the signal level of the object is low.
Auto Mid
: Switches to the black-and-white mode when the
luminance of the signal level of the object is
medium.
Auto High
: Switches to the black-and-white mode when the
luminance of the signal level of the object is high.
[Set values: Color, Black&White, Auto Low, Auto Mid, Auto High]
Note:
● A mechanical sound (that sounds when infrared ray filter is being
plugged or unplugged) will sound when modes are been switched.
● When AAuto LowB, AAuto MidB or AAuto HighB has been selected
VN-V26U will change the mode immediately according to the luminance
level.
M EV
For setting EV (Exposure Value) correction. Enables setting between
-9 (-3EV) ~ 6 (+2EV).
You can specify settings in each 1/3 EV step. Decreasing the value darkens
the images, while increasing the value brightens the image.
Compensation
[Set values: -9 ~ 0 ~ 6]
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Camera Page (continued)
N
O
42
Download from Www.Somanuals.com. All Manuals Search And Download.
N White Balance
For selecting the white balance control feature. White balance can be
adjusted for a light source with a color temperature range of 2800K to
9500K.
Switches to the Auto-Tracking White Balance (automatic color temperature
tracking) mode. Adjusts the white balance automatically according to the
color temperature of the light.
ATW
AWC
Switches to the Auto-White Balance Control mode. In the AWC mode,
values entered for the [AWC R-GAIN] and [AWC B-GAIN] items are applied
to white balance.
Executes AWC (automatic white balance control).
Execute by placing a white object around the center of the screen in a
location with a lighting condition that is similar to the object to be shot.
● Pressing the [One Push] button replaces the [AWC R-GAIN] and [AWC
B-GAIN] values with the values of the AWC execution results.
● Even when white balance is set to ATW, pressing the [One Push] button
switches the mode automatically to AWC.
One Push
AWC
For setting the gain of R (red) when in the AWC mode.
Larger value
: Increases the redness.
AWC R-GAIN
AWC B-GAIN
Smaller value : Decreases the redness.
[Set values: 0 ~ 85 ~ 255]
For setting the gain of B (blue) when in the AWC mode
Larger value
: Increases the blueness.
Smaller value : Decreases the blueness.
[Set values: 0 ~ 219 ~ 255]
O Back Light
For selecting the backlight compensation feature. Set this feature when
there is a bright light source in the same direction as the object. Enables
unwanted light sources to be excluded from the photometry area.
Compensation
Off
: Disables backlight compensation.
Area1 - 4
: For selecting a photometry area from the four available
types.
[Set values: Off, Area1, Area2, Area3, Area4]
Photometry
Area
Photometry
Area
Photometry
Area
Photometry
Area
Photometry
Area
Off
Area1
Area2
Area3
Area4
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Encoding Page
This page is for setting JPEG and MPEG4 encoding parameters.
This page can be used during access using AadminB or AoperatorB.
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
● When settings on this page are altered during playback using the built-in viewer, reboot the viewer.
● There is a maximum limit to the bit rate for transmission by VN-V25U/26U. If a bit rate that exceeds
the maximum limit is specified, this new setting will not be applied. For details on the maximum
transmission limit, refer to the section on ANetwork RequirementsB (A Page 24).
A
B
C
D
E
F
G
A Frame Size
For setting the frame size of each JPEG or MPEG4 screen to VGA (640 x
480) or QVGA (320 x 240).
Select one of the four different patterns.
When the frame size of JPEG is the same as MPEG4, the privacy mask can
be displayed on both images. When the frame size of JPEG is different from
MPEG4, privacy mask can only be displayed on QVGA images. (A Page
56)
44
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG
B Quality/Size
For specifying the rate control mode and target file size for JPEG.
When AVFS1B to AVFS7B is selected, the quantization table during JPEG
encoding will be maintained and the file size will increase/decrease
according to the input signals. Stipulated values will be displayed in the Size
field. When recording JPEG data to a recorder with a limited storage
capacity, note that the maximum recording time may vary as the file size
fluctuates under this setting.
When AAFSB is selected, encoding is performed such that the target file size
is the average size of multiple JPEG images. You can enter the target size in
the Size field.
[Quality field set values: VFS1 - VFS7, AFS]
[Size field setting range for VGA: 10kB - 100kB (only when AFS is
specified)]
[Size field setting range for QVGA: 3kB - 33kB (only when AFS is
specified)]
MPEG4
C Bitrate
For setting the MPEG4 encoding bit rate.
[Setting range: 64 kbps - 8000 kbps]
D Bitrate Control
For selecting whether to set the MPEG4 rate control mode to CBR (Constant
Bit Rate) or VBR (Variable Bit Rate).
CBR : Encoding is performed at a fixed bit rate regardless of the condition
of the input video signals. Enables easy forecast of the bit rate.
VBR : Changes the bit rate according to the condition of the input video
signals. Picture quality is stable, but forecast of the bit rate is
difficult.
E Frame Rate
For setting the MPEG4 frame rate.
[Setting range: 1 fps - 30 fps]
F I Frame Interval
For setting the I-frame interval. MPEG4 starts encoding from the I-frame.
Shortening the interval stabilizes the picture quality even when there are
rapid changes in the video image. However, the picture quality for images
with little change will deteriorate. In addition, when multicast packet loss
occurs, the time interval required to restore the image is shorter.
[Set values: 30, 60, 90, 120, 150]
G Priority
For selecting whether to assign priority to the frame rate or picture quality
during MPEG4 encoding.
FPS
: Assigns priority to frame rate. Select this setting to enable
smooth monitoring of motion images.
Quality
: Assigns priority to picture quality.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Audio Page (VN-V26U only)
This page is for setting the audio parameters.
This page can be used during access using AadminB or AoperatorB
●
To enable the new settings, press the [OK] button.
A
B
A Duplex Mode
For setting the audio transmission method.
When half duplex is selected, audio sent to computers from the camera is
muted when audio is transmitted from a computer to the camera.
When full duplex is selected, you can send audio to the camera from a
computer while listening to audio sent to computers from the camera
[Set values: Half Duplex, Full Duplex]
Note:
● When AFull DuplexB has been set, there may be cases where echos will
happen as a result of the audio sent from the computer gets picked up by
the VN-V26U’s internal mike. In that case select AHalf DuplexB.
B Mike Gain
For specifying the gain value for the built-in microphone of VN-V26U.
[Set values: 0 dB, 20 dB, 26 dB, 32 dB]
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Alarm Page
This page is for setting actions when there is an alarm.
Up to 5 actions (No. 01 - No. 05) may be set.
This page can be used during access using AadminB or AoperatorB.
●
Press the [OK] button to enable the new settings. Only items that are valid under the selected action
will be saved. When Disable is selected for the action, all settings will be restored to their default
values.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
A
B
C
D
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Alarm Page (continued)
A Action
For specifying the type of action.
Disable
Mail
: Does not trigger any action.
: Sends out e-mail. Specify the recipient’s mail address.
The title of the mail will appear as [Alarm from VN-V2x]
and the sender as [Camera ID]. Enter the message to send
in [Mail Text]. Input up to 127 alphanumeric characters.
To attach the latest image to the mail, set [Attach Image] to
AOnB.
FTP
: Sends out pre-/post-recorded JPEG files via FTP. See the
page on Alarm Environment for details on pre-/post-
recording and FTP server settings. (A Page 52)
The maximum transmission rate of FTP is 1 Mbps. If a new
FTP trigger occurs during post-recording, the recorded
portion is treated as pre-recording and a new post-
recording starts. During FTP transmission after completing
the post-recording, a new post-recording starts if a new
FTP trigger occurs.
TCP
UDP
: Sends out the character string entered in the [TCP/UDP
Data] field to the destinations specified in [TCP/UDP IP
Address] and [TCP/UDP Port Number] via TCP.
: Sends out the character string entered in the [TCP/UDP
Data] field to the destinations specified in [TCP/UDP IP
Address] and [TCP/UDP Port Number] via UDP.
TCP/UDP Data : Input up to 127 alphanumeric characters.
Output 1 Make : Changes Alarm Output 1 to Make.
Output 2 Make : Changes Alarm Output 2 to Make.
Output 1 Break : Changes Alarm Output 1 to Break.
Output 2 Break : Changes Alarm Output 2 to Break.
Set the alarm output time in the [Alarm Output Duration]
field.
Ⅵ For VN-V26U, you can specify the following items in addition to the above.
BlackWhite B Color
: Changes the setting in [B&W Mode] from
ABlack&WhiteB to AColorB.
Color B BlackWhite
: Changes the setting in [B&W Mode] from AColorB
to ABlack&WhiteB.
Auto Low
Auto Mid
Auto High
: Changes the [B&W Mode] setting to AAuto LowB.
: Changes the [B&W Mode] setting to AAuto MidB.
: Changes the [B&W Mode] setting to AAuto HighB.
Note:
● For details on [B&W Mode], see [B&W Mode]. (A Page 41)
48
Download from Www.Somanuals.com. All Manuals Search And Download.
B 1st Trigger
For specifying the first trigger to be activated.
Either alarm input (make), alarm input (break) or motion detection can be
selected.
Ⅵ For VN-V26U, you can specify the following items in addition to the above.
BlackWhite B Color
: When the image switches from the black-and-
white mode to color mode
Color B BlackWhite
: When the image switches from the color to black-
and-white mode.
Note:
● When the second trigger is turned off, the action will be invoked only by
the first trigger.
● When AMotion detectionB, ABlackWhite B ColorB, AColor B BlackWhiteB
is selected as the first trigger, selection of AMax. IntervalB and A2nd
TriggerB will be disabled.
C Max. Interval
D 2nd Trigger
Enabled when both the first and second triggers are specified.
Specify the maximum interval between the first and second triggers. An
action will be invoked only if the interval between the first and second
triggers is within the maximum interval.
For specifying the second trigger for invoking an action.
Either alarm input (make) or alarm input (break) can be selected. Unlike the
first trigger, AMotion detectionB, ABlackWhite B ColorB, AColor B
BlackWhiteB is not available as an option.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Alarm Page (continued)
E
F
G
H
50
Download from Www.Somanuals.com. All Manuals Search And Download.
E Mail
Mail Address
Mail Text
: For entering the recipient’s mail address.
: For entering the mail transmission data. Input
up to 127 alphanumeric characters.
Attach Image
: For specifying whether to attach images to the
mail.
F TCP/UDP
TCP/UDP IP Address
: For entering the address when alarm action
notification is to be sent via TCP or UDP. (IP or
FQDN)
TCP/UDP Port Number
TCP/UDP Data
: For entering the port number when alarm action
notification is to be sent via TCP or UDP. (1 ~
65535)
: For entering the data to send during TCP or
UDP notification. Input up to 127 alphanumeric
characters.
G Alarm Output
For setting the alarm output time from the alarm output terminal.
When this is set to “0”, it is not possible to revert back to break (or make)
after changing to make (or break).
Duration
[Setting range: 0, 100 msec ~ 5000 msec]
H Time Filter
For specifying the alarm action with respect to each day of the week and
setting the corresponding time of the day.
Applicable day of week
: Sunday, Monday, Tuesday, Wednesday,
Thursday, Friday, Saturday
Alarm action
Unmask Span
: For specifying the time period for invoking the
action
Mask Span
Unmask All
: For specifying the time period to stop the action
: Activated at all times
Mask All
: Stopped at all times
Applicable time period
: For specifying the start and end time in hours
and minutes.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Alarm Environment Page
This page is for setting alarm-related environments.
This page can be used during access using AadminB or AoperatorB.
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
A
B
52
Download from Www.Somanuals.com. All Manuals Search And Download.
A Mail
For setting the mail environment when [Mail] is specified as an action on the
Alarm page.
[SMTP] and [POP] can be used. Configure only the [SMTP] settings under
usual circumstances.
Enter the camera’s mail address as the recipient’s mail address.
Configure the [POP] settings as well if [POP before SMTP] is enabled. In
addition, if FQDN is set for [SMTP Server], configure also the DNS server
settings on the Basic page. (A Page 61)
Note:
What is FQDN (Fully Qualified Domain Name)?
This is a fully qualified domain name that indicates a notation method of
describing the entire host or domain name on the TCP/IP network without
abbreviating.
For example, if the host name is www and the domain name is victor.co.jp,
this will be denoted as “www.victor.co.jp” in FQDN.
B FTP
For setting the FTP environment when [FTP] is specified as an action on the
Alarm page. This is common with the FTP environment when using the
periodic FTP on this page.
When [Directory] is left blank, FTP transfer will be performed to the home
directory of the FTP server. To enable FTP transfer to a directory below the
home directory, set the corresponding directory name in [Directory].
Delimit the directory using “/”.
Example: subdir1/subdir2
Destination directory of FTP transfer will be dependent on the FTP server if
“/” is added at the beginning.
Setting [Periodic FTP] to AOnB enables transfer of the latest JPEG images to
the FTP server at regular intervals. Specify the interval in seconds for
[Periodic FTP Interval].
File name: Select a type from the two types of periodic FTP file names.
When AAutoB is selected, images are generated from the year, month, day,
hour, minute, second, and number.
Example: 20071114161032-001-2.jpg
When AManualB is selected, you can select a file name generation method
from the following.
● File name containing only the character string entered in [User-defined-
name]
Example: Camera1.jpg
● File name with the year, month, day, hour, minute, and second added to
[User-defined-name]
Example: Camera1_20071114161032001.jpg
The name of the file to be transmitted via FTP is made up of the action
number, year, month, day, hour, minute, second, number and trigger flag.
Example: 01-20070711152904-001-0.jpg
The first two digits are the action number, and the following 14 digits denote
the year, month, day, hour, minute and second.
The three digits after the first hyphen is the number of the series of JPEG
files to be sent via the FTP. The number starts from “000”. The last digit
denotes the trigger flag. This is displayed as “1” only for the JPEG file during
a trigger input, and as “0” if otherwise.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Alarm Environment Page (continued)
B
C
54
Download from Www.Somanuals.com. All Manuals Search And Download.
B FTP
Time Filter:
For specifying the periodic FTP transfer action with respect to each day of
the week and setting the corresponding time of the day.
Applicable day of week : Sunday, Monday, Tuesday, Wednesday,
Thursday, Friday, Saturday
Alarm action
Unmask Span
: For specifying the time period for invoking the
action
Mask Span
Unmask All
Mask All
: For specifying the time period to stop the action
: Activated at all times
: Stopped at all times
Applicable time period : For specifying the start and end time in hours and
minutes.
Pre-/Post-recording parameter:
[PrePostRecording Frame Rate] : For specifying the JPEG frame rate for
FTP pre-/post-recording.
[PrePostRecording Before Trigger] : For setting the FTP pre-recording
trigger time (recording time before
alarm input) in seconds.
[Setting range: 0 ~ 60 seconds]
[PrePostRecording After Trigger] : For setting the FTP post-recording
trigger time (recording time after alarm
input) in seconds.
[Setting range: 0 ~ 60 seconds]
The maximum time intervals for [PrePostRecording Before Trigger] and
[PrePostRecording After Trigger] are determined by the JPEG size on the
Encoding page as well as [PrePostRecording Frame Rate]. A message
appears if the combination of the entered values are not feasible.
C Alarm Output
For setting the alarm output.
Duration
For setting the output time of [Manual Output].
[Setting range: 0/100 msec ~ 5000 msec]
Manual
Output
For operating alarm output manually.
The current output status appears on the right. When [Duration] is set to “0”,
pressing the [Make] button switches the alarm to Make output, while
pressing the [Break] button switches the alarm to Break output.
When [Duration] is set to a value other than “0”, pressing the [Make] button
switches the alarm to Make output only during the duration of the output,
upon which it switches to Break output.
When the output duration is set to a value other than “0”, pressing the
[Break] button switches the alarm to Break output only during the duration of
the output, upon which it switches to Make output.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Privacy Mask Page
Privacy Mask is a feature that enables masking of a portion of the image.
VN-V25U/26U enables privacy masks to be specified in different shapes. The Privacy Mask masks
area by uploading a BMP file painted in red (created separately). The displayed color is determined by
the color specified on this page.
This page can be used during access using AadminB or AoperatorB.
● Press the [OK] button to enable the new settings.
Note:
● When using the [MONITOR OUT] output (A Page 11, 19), the privacy mask cannot be used.
Set the privacy mask to AOffB. After changing the [MONITOR OUT] switch setting, press the Reset
button to reboot the camera.
A
B
C
Mask Color Settings Screen
D
56
Download from Www.Somanuals.com. All Manuals Search And Download.
A Mode
For specifying whether to activate the Privacy Mask feature.
When this is set to AOnB, the privacy mask specified using the following
items will appear on the image.
Note:
● When MPEG4 is set to the same frame size as JPEG, privacy masks are
displayed on both images.
● When MPEG4 is set to a different frame size from JPEG, privacy mask
appears only on the QVGA image.
B Masking Data
Get ready the BMP file (VGA or QVGA size) for specifying the position and
shape of the privacy mask on the computer in advance. (Refer to the
following for procedures to create the BMP file.)
Press the [Browse...] button to display the file selection screen. Select the
BMP file that has been created on this screen.
Press the [Upload] button to upload the selected BMP file to VN-V25U/26U.
Creating the BMP file
1. Upon installing the camera, use JPEG Viewer to save the JPEG file on
the computer. (JPEG Viewer: A Page 82)
2. Open the saved JPEG file on the computer using the Paint tool, and paint
the area to be masked in red ((R, G, B) = (255, 0, 0)).
3. Save this image as a BMP file (24 bits).
C Masking Color
Press the [Settings] button to display the Masking Color Setting screen.
You can alter the color of the privacy mask.
D Masking Color
For specifying the color ratio in the red:green:blue format.
Press the [Save] button to set the selected color as the mask color.
Press the [Default] button to restore the default mask color settings.
Setting
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Motion Detection Page
This page is for setting motion detection.
● The area valid for motion detection is displayed in blue.
● The area where motion is detected is displayed in red.
A
B
C
D
E
F
58
Download from Www.Somanuals.com. All Manuals Search And Download.
A Display Screen
The screen is divided into blocks of 10 (horizontal) x 8 (vertical). Use this to
set whether to mask each block.
All blocks are masked in the default setting.
The block turns blue when it is clicked, indicating that it is unmasked. Click
again to return to the masked state.
Press the [OK] button to enable this setting.
Use the [Mask All] button to mask all blocks.
Use the [Clear Mask] button to unmask all blocks.
B Detection
C OK/Cancel
D Level
For setting motion detection to On/Off.
Press the [OK] button to enable this setting.
To apply the new parameters, press the [OK] button. Press the [Cancel]
button to cancel the change.
For setting the sensitivity of motion detection.
Increasing the number raises the detection sensitivity level, and hence it is
more sensitive.
Press the [OK] button to enable this setting.
E Mask All
Masks all blocks and enables the current motion detection and detection
sensitivity settings.
Press the [OK] button to enable this setting.
F Clear Mask
Unmasks all blocks and enables the current motion detection and detection
sensitivity settings.
Press the [OK] button to enable this setting.
Caution:
Note:
● Flickers of fluorescent lamps may cause
motion detection.
● The area display position serves as a
reference. Make sure to perform operation
check.
● Changes in brightness due to the light source
may be detected as motion.
● Plugging/Unplugging the infrared ray filter in
black-and-white mode may cause motion
detection (VN-V26U).
● The motion detection feature is not intended
to prevent theft or fire. This feature may not
function properly depending on the
conditions of the object and settings.
Our company shall not be liable for any
accident or damage that occurs.
● The screen is divided into blocks of
80 (10 horizontal x 8 vertical).
Set the angle of view such that the size of the
object for which motion is to be detected is
larger than the size of multiple blocks.
● When images on VN-V25U/26U are currently
acquired by another client, video images may
not appear on the [Motion Detection] page
due to the maximum distribution limit of
VN-V25U/26U. Stop other clients before
using the [Motion Detection] page.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Basic Page
This page is for performing basic setting related to the network.
This page can be used during access using AadminB.
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
● When settings of the Basic page is changed, all services that are currently running will end
immediately. For example, when changes are made to the Basic page during JPEG/MPEG4
distribution, distribution will be discontinued and TCP will be disconnected.
A
B
C
D
E
F
G
60
Download from Www.Somanuals.com. All Manuals Search And Download.
A IP Setting
For setting the DHCP client function.
Connect VN-V25U/26U to a network environment with a DHCP server when
DHCP is to be enabled.
If the DHCP server does not exist when DHCP is set to AEnableB, VN-V25U/
26U will start running with the 192.168.0.2 IP address and 255.255.255.0
subnet mask in about 2 minutes after startup.
Refer to AIP Address SettingsB (A Page 27) for the IP address.
B IP Address
For setting the IP address of VN-V25U/26U.
For setting the subnet mask of VN-V25U/26U.
C Subnet Mask
D Default Gateway For setting the default gateway of VN-V25U/26U.
Set as 0.0.0.0 when a default gateway is not set.
E Host Name
For setting the host name of VN-V25U/26U.
Specify a name using alphanumeric characters, hyphen (-) or period (.).
Underscores (_) cannot be used.
F DNS Server
For setting the address of the DNS server.
G MAC Address
The MAC address of VN-V25U/26U is displayed in a hexadecimal number.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Details Page
This page is for performing detailed network setting.
This page can be used during access using AadminB.
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
The model illustrated in the diagram is VN-V26U.
A
B
C
D
E
F
G
A JPEG TOS(DS field)
For setting the TOS value of IP packets in which JPEG is stored.
The upper six bits out of the eight bits that make up the TOS value belong to DSCP.
This upper six bits can be set. The lower two bits are “0”. For example,
upon setting to “255”, the lower two bits are converted to “0”, and the
value becomes “252”.
TOS values are used in networks that support QoS. By setting QoS for
the network switch, routing can be done by giving priority to packets with
a larger TOS value.
B MPEG4 TOS(DS field) For setting the TOS value of IP packets in which MPEG4 is stored.
For details, refer to the [JPEG TOS(DS field)] item above.
C Audio TOS(DS field)
For setting the TOS value of IP packets in which Audio is stored.
For details, refer to the [JPEG TOS(DS field)] item above.
(VN-V26U only)
D TTL Unicast
E TTL Multicast
F MTU
For setting the TTL value of JPEG/MPEG4 packets that are to be sent via
TCP.
For setting the TTL value of JPEG/MPEG4 packets that are to be sent
via multicast.
For setting the maximum packet size for storing JPEG/MPEG4.
[Setting range: 1280 ~ 1500]
G Negotiation
For setting the negotiation of the network.
When a value other than AAutoB is selected, do not set the network
device to be connected to AAutoB. Ensure that it is set to the same value
as VN-V25U/26U.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Protocol Page
This page is for changing the HTTP server port number.
This page can be used during access using AadminB.
● Press the [OK] button to enable the new settings.
● After changing, you will need to re-establish the connection if you are using the Internet Explorer.
A
A HTTP Server
Youcan changetheportnumber for the built-in web serverofVN-V25U/26U.
(1 ~ 65535: The default port number setting is 80.)
The JPEG and MPEG4 HTTP port number for the web server will also be
changed.
Port
During access to VN-V25U/26U from the Internet Explorer, enter the
following in the Internet Explorer when the camera is in its default settings.
http://192.168.0.2
If the port number is changed to 8080, for example, enter the Internet
Explorer as follows.
http://192.168.0.2:8080
Note:
● If the built-in viewer is used for playback, change the HTTP port number in the setting screen of the
built-in viewer to the same value.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Streaming Page
This page is for setting manual multicast transmission.
This page can be used during access using AadminB or AoperatorB.
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
A
B
C
D
Ⅵ VN-V25U
E
F
G
Ⅵ VN-V26U
A
B
C
D
E
G
F
H
I
J
64
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG
A Control
For starting or stopping streaming of JPEG images.
Parameters that are set on the [Streaming] page will be saved when
transmission is started upon pressing the [Start] button.
B Destination
For specifying the destination address of JPEG streaming.
Specify the multicast address. When other devices that make use of
multicast transmission exist, ensure that each of them is set to a different
multicast address.
Address
C Destination Port For specifying the destination port number of JPEG streaming.
Specify an even number for RTP compliance.
When other devices that make use of multicast transmission exist, it is
recommended that each of them be set to a different port number.
Multiple multicast streams cannot be received on a single computer when
there are duplicate port numbers.
D Frame Rate
MPEG4
For specifying the frame rate when sending JPEG images via multicast.
E Control
For starting or stopping streaming of MPEG4 images.
Parameters that are set on the [Streaming] page will be saved when
transmission is started upon pressing the [Start] button.
F Destination
For specifying the destination address for MPEG4 streaming.
Specify the multicast address. When other devices that make use of
multicast transmission exist, ensure that each of them is set to a different
multicast address.
Address
G Destination Port For specifying the destination port number for MPEG4 streaming.
Specify an even number for RTP compliance.
When other devices that make use of multicast transmission exist, it is
recommended that each of them be set to a different port number.
Multiple multicast streams cannot be received on a single computer when
there are duplicate port numbers.
Audio (VN-V26U only)
H Control
For starting or stopping streaming of audio.
Parameters that are set on the [Streaming] page will be saved when
transmission is started upon pressing the [Start] button.
I Destination
For specifying the destination address of audio streaming.
Specify the multicast address. When other devices that make use of
multicast transmission exist, ensure that each of them is set to a different
multicast address.
Address
J Destination Port For specifying the destination port number of audio streaming.
Specify an even number for RTP compliance.
When other devices that make use of multicast transmission exist, it is
recommended that each of them be set to a different port number.
Multiple multicast streams cannot be received on a single computer when
there are duplicate port numbers.
Note:
● When the power of VN-V25U/26U shuts down accidentally during multicast transmission, multicast
transmission will restart automatically after VN-V25U/26U is rebooted.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Access Restrictions Page
This page is for setting client restrictions.
This page can be used during access using AadminB.
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
● This feature is targeted at JPEG/MPEG4 acquisition. It does not impose restrictions on access via a
web browser or use of API.
Caution:
● The Access Restriction feature determines whether to impose restrictions during TCP connection by
the client. In the case when access restriction is set after TCP connection by a client has been
established, TCP connection will not be disconnected.
A
B
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Destination Address
Restrictions may be imposed on clients accessing VN-V25U/26U using the
IP address.
A Access
When AdenyB is selected, acquisition of JPEG/MPEG4 via the IP address
specified for the [IP Address] item will be denied. Restrictions are not
imposed on access to the Web Settings page.
Restrictions
When AallowB is selected, acquisition of JPEG/MPEG4 via the IP address
specified for the [IP Address] item will be permitted. Restrictions are not
imposed on access to the Web Settings page.
B IP Address
When a multicast address is specified and AdenyB is selected, VN-V25U/
26U will deny transmission to this multicast address.
When a multicast address is specified and AallowB is selected, VN-V25U/
26U will only accept transmission to this multicast address and deny
transmission to multicast addresses that are not stated in the [IP Address]
field.
Caution:
Note:
● Note that when AallowB is selected and all IP
address fields are left blank, JPEG/MPEG4
acquisition by all IP addresses will be denied.
Restrictions are not imposed on access to
the Web Settings page.
● To specify a specific IP address range, enter
a combination of the IP address and subnet
mask in the [IP Address] field.
● Define the subnet mask using a length
between 8 ~ 30 bits.
For example, a range between 192.168.0.0
to 192.168.0.255 is denoted as 192.168.0.0/
24 ([IP Address]/[bit length of subnet mask]).
Additionally, VN-V25U/26U will also deny
access when instructions for transmission to
the specified IP address are sent via API.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Time Page
This page is for setting time.
This page can be used during access using AadminB.
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
A
B
C
D
E
A SNTP
For setting the SNTP client feature.
When this is set to AOnB, the system accesses the specified NTP server at
regular intervals to acquire the time.
In addition, time will be recorded in the JPEG headers distributed by
VN-V25U/26U. Discontinuity in JPEG header’s time may occur immediately
before and after acquiring time from the NTP server.
B NTP Server
C Access Interval
D Time
For setting the IP address of the NTP server.
For setting the time interval for access to the NTP server.
Displays the time on the clock of VN-V25U/26U.
The clock time can be changed by entering an appropriate value. (Second
value cannot be specified.)
In addition, time will be recorded in the JPEG headers distributed by
VN-V25U/26U. Discontinuity may occur in the JPEG header’s time
immediately before and after changing the time.
E Time Zone
For setting the time zone.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Password Page
This page is for setting the password.
This page can be used during access using AadminB.
● Press the [OK] button to enable the new settings.
A
B
C
A Username
Select a user name.
B New Password
Enter a new password.
Passwords shall be at least 4 characters and not longer than 16 characters.
VN-V25U/26U is case sensitive.
C New Password
Enter again to confirm the new password.
Again
Caution:
● Be sure to handle the password carefully in case you forget it.
● In the event that you forget the password, please consult JVC’s servicing center.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Maintenance Page
This page is for maintenance purposes.
This page can be used during access using AadminB.
A
B
A All Settings
AInitializeB
Restores all settings to their default values and reboots the unit. (It takes
about one minute for the camera to initialize and reboot.)
Passwords will also be initialized. The built-in clock of VN-V25U/26U will not
be affected. JPEG/MPEG4 transmission and all others services that are
running will be discontinued.
B Update
Upgrades the firmware version of VN-V25U/26U and reboots the unit.
The settings of VN-V25U/26U will be saved. Copy the new firmware file to
the computer on which Internet Explorer is used, and specify this file using
the [Browse...] button. Press the [Update] button to start the update. JPEG/
MPEG4 transmission and all others services that are running will be
discontinued. The update process may take several minutes.
A message will be displayed on the Internet Explorer when update is
successfully completed.
Caution:
● Do not turn off the power when update is in progress or during reboot
after update is complete. Turning off the power of the camera may cause
it to malfunction.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
LED State Page
This page is for setting the method for lighting the [STATUS] indicator at the side of VN-V25U/26U.
This page can be used during access using AadminB or AoperatorB.
● Press the [OK] button to enable the new settings.
A
B
A LED State
For selecting whether to light up the [STATUS] indicator of this unit when it is
running.
Enable
Disable
: Lights up when unit is running.
: Turns off the indicator after startup is complete.
B Identify Unit
If you want the [STATUS] indicator to blink such as during visual check of the
camera currently being configured from the computer, set this item to
ABlinkB.
Note:
● The light of the indicator remains off if the LED State is set to ADisableB.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Ⅵ Alarm Page
Item
Setting (continued)
Factory Settings
Action
Disable
List of Factory Settings of Each Page
1st Trigger
Input 1 Make
Ⅵ Camera Page
Max. Interval
2nd Trigger
—
Item
Camera ID
Factory Settings
Off
VN-V25
VN-V26
Mail Address
Mail Text
—
—
Monitor Type
Black Level
Gamma
Custom
1
Attach Image
TCP/UDP IP Address
TCP/UDP Port Number
TCP/UDP Data
Alarm Output Duration
Time Filter
Off
—
0
—
Enhance Frequency
Enhance Level
Color Level
AGC
High
0
—
—
0
Unmask All
High
x4
Sense Up
Ⅵ Alarm Environment Page
ALC Priority
Shutter Speed
Motion
1/30
Off
Item
SMTP Server
Factory Settings
0.0.0.0
Easy Day and Night
(VN-V25U only)
Port Number
25
POP before SMTP
POP Server
Off
B&W Mode
(VN-V26U only)
Color
0.0.0.0
Port Number
110
EV Compensation
White Balance
0
Username
—
ATW
Password
—
Back Light Compensation Off
FTP Server
0.0.0.0
Ⅵ Encoding Page
Directory
—
Item
Factory Settings
Username
—
JPEG Frame Size
MPEG4 Frame Size
JPEG Quality
VGA
Password
—
VGA
Periodic FTP
Periodic FTP Interval
Periodic FTP Naming
Periodic FTP Time Filter
Off
VFS4
2000 kbps
CBR
1
MPEG4 Bitrate
Auto
MPEG4 Bitrate Control
MPEG4 FPS
Unmask All
15 fps
30
PrePostRecording Frame 15 fps
Rate
MPEG4 I Frame Interval
MPEG4 Priority
FPS
PrePostRecording Before 5 sec
Trigger
Ⅵ Audio Page (VN-V26U only)
Item Factory Settings
Duplex Mode
Mike Gain
PrePostRecording After
Trigger
5 sec
Half Duplex
32 dB
Duration
1000 msec
Break
Manual Output 1
Manual Output 2
Break
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Ⅵ Streaming Page
List of Factory Settings of Each Page
(continued)
Item
Factory Settings
JPEG Destination
Address
225.0.1.1
Ⅵ Privacy Mask Page
Item
Factory Settings
Off
JPEG Destination Port
JPEG Frame Rate
49152
Mode
Masking Color Setting
15 fps
16 (R, G, B)
MPEG4 Destination
Address
225.0.2.1
Ⅵ Motion Detection Page
MPEG4 Destination Port 59152
Item
Factory Settings
Audio Destination
Address (VN-V26U only)
225.0.3.1
Mask
Mask All
Audio Destination Port
(VN-V26U only)
39152
Detection
Level
Off
4
Ⅵ Access Restrictions Page
Ⅵ Basic Page
Item
Access Restrictions
IP Address
Factory Settings
Item
IP Setting
Factory Settings
DHCP Enable
192.168.0.2
255.255.255.0
0.0.0.0
deny
—
IP Address
Subnet Mask
Default Gateway
Host Name
Ⅵ Time Page
Item
SNTP
Factory Settings
—
Off
DNS Server
0.0.0.0
NTP Server
Access Interval
Time Zone
0.0.0.0
hour, 1
Ⅵ Details Page
(GMT) UTC
Item
JPEG TOS
Factory Settings
0
0
0
Ⅵ Password Page
MPEG4 TOS
Item
Username
Factory Settings
Audio TOS
(VN-V26U only)
AadminB
Current Password
Blank
Default passwords
are:
TTL TCP
TTL Multicast
MTU
64
32
AadminB
: vn-v2x
1500
Auto
AoperatorB : vn-v2x
Negotiation
AuserB
: vn-v2x
Ⅵ Protocol Page
Ⅵ LED Settings Page
Item
Factory Settings
Item
Factory Settings
HTTP Server Port
80
LED State
Enable
On
Identify Unit
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Using Internet Explorer
Setting (continued)
Miscellaneous Page
This page is for acquiring information.
This page can be used during access using AadminB, AoperatorB and AuserB.
A
A Open Source
Press the [Show] button to display information of the software used by
VN-V25U/26U.
Software
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Page
Displays the operating status of VN-V25U/26U.
This page can be used during access using AadminB or AoperatorB.
A
B
C
A Total Sending
Displays the total TCP/UDP bit rate sent by VN-V25U/26U as well as the
individual bit rates.
Bitrate
B Destination
C System Log
Displays the destination that VN-V25U/26U is sending data to.
Displays the following information.
● Number of seconds after startup
● Alarm information
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings Page (continued)
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
This product comes with a JPEG Viewer and an MPEG4 Viewer. Each of these viewers functions separately.
Ⅵ Using the JPEG Viewer enables display of a series of still images as well as one-shot recording of still
images.
Ⅵ Using the MPEG4 Viewer enables display of MPEG4-encoded motion images.
Ⅵ For VN-V26U, you can send or receive audio using the JPEG/MPEG4 Viewer.
ࡗ AInternet Explorer SetupB (A Page 79) ࡗ AInstalling the built-in viewerB (A Page 81) ࡗ AScreen Configuration of JPEG ViewerB (A Page 82) ࡗ AJPEG Viewer ConfigurationB (A Page 84) ࡗ AExiting the JPEG ViewerB (A Page 87) ࡗ AScreen Configuration of MPEG4 ViewerB (A Page 88) ࡗ AMPEG4 Viewer ConfigurationB (A Page 90) ࡗ AExiting the MPEG4 ViewerB (A Page 93) ࡗ AAudio Setup (VN-V26U only)B (A Page 94) ࡗ AShortcut for Built-in ViewerB (A Page 96) When the display or configuration of the opened screen appears strange, check
using the following procedures.
A Click [Start]-[Control Panel]-[Display] and open the [Display Properties] window
B Click the [Settings] tab in the [Display Properties] windows and click the [Advanced] button
C Check that [DPI setting] in the [General] tab has become [Normal size(96DPI)]
D Otherwise, change the setting to [Normal size(96DPI)] andreboot windows
Internet Explorer Setup
1.Launch the Internet Explorer on the computer
2.When proxy settings are enabled in the Internet Explorer, follow the steps below to disable
the proxy of the Internet Explorer
● Select in the order of [Tool]-[Internet Options]-[Connections]-[LAN Setting], followed by
deselecting the check for AUse a proxy server for your LANB under [Proxy Server] in the [Local
Area Network (LAN) Settings] window.
Deselect the check
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Operation of Built-in Viewer
(continued)
Internet Explorer Setup (continued)
3.If ActiveX controls and plug-ins of the Internet Explorer is disabled, follow the steps below to
enable it
● Click [Trusted sites] under [Tool]-[Internet Options]-[Security]. Upon doing so, the [Sites…]
button directly below becomes active. Click this button and deselect the check in the displayed
window. Next, add the IP address of VN-V25U/26U. If the setting is factory default, add the
following web site to the zone.
http://192.168.0.2
● Click [Trusted sites] under [Tool]-[Internet Options]-[Security]. Select the [Custom Level] button
and open the [Security Settings] window. Set all items under [ActiveX controls and plug-ins] in
the opened window to [Enable]. Enable also [Allow Script-initiated window without size or
position constraints.] under [Miscellaneous].
4.If the pop-up block function of the Internet Explorer is enabled, follow the steps below to
disable it
T The built-in viewer cannot be used when the pop-up block function is enabled.
● Selecting [Tool]-[Pop-up Blocker]-[Turn Off Pop-up Blocker] permits all sites.
● To allow only specific sites such as VN-V25U/26U, select [Tool]-[Pop-up Blocker]-[Turn On Pop-
up Blocker], followed by selecting [Tool]-[Pop-up Blocker]-[Pop-up Blocker Settings] that
becomes active to open the [Pop-up Blocker Settings] window. In the opened window, add the
address of VN-V25U/26U as a permitted web site address.
5.When plug-in tools such as the Yahoo or Google toolbar are included in the Internet
Explorer, disable the pop-up block function of these plug-in tools as well
Note:
● To use the built-in MPEG4 Viewer of VN-V25U/26U, install “ffdshow” that is open source codec. You
can download “ffdshow” from the Internet.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the built-in viewer
1.Enter the URL of the built-in viewer in the address field of Internet Explorer
For example, if the IP address of VN-V25U/26U is 192.168.0.2, enter as follows:
Ⅵ VN-V25U
● JPEG Viewer
http://192.168.0.2/cgi-bin/v25viewing.cgi?v25monitor_j.html
● MPEG4 Viewer
http://192.168.0.2/cgi-bin/v25viewing.cgi?v25monitor_m.html
Ⅵ VN-V26U
● JPEG Viewer
http://192.168.0.2/cgi-bin/v26viewing.cgi?v26monitor_j.html
● MPEG4 Viewer
http://192.168.0.2/cgi-bin/v26viewing.cgi?v26monitor_m.html
Enter the URL in the built-in viewer of this camera.
(Refer to the above for the default URL setting.)
A
B Click [Go]
2.Enter the user name and password
Enter the user name.
A
B
This is set to AadminB by default.
VN-V25
Enter the password.
This is set to Avn-v2xB by default.
C
Click [OK].
3.The viewer is installed and launched
81
Download from Www.Somanuals.com. All Manuals Search And Download.
A DisplaySize
B Capture
Switches the display size. (VGA or QVGA)
Captures the currently displayed image on the computer.
Images captured will be stored as a JPEG file in the folder created under
[My Document] of the computer. The default folder names for VN-V25U
and VN-V26U are AVN-V25UB and AVN-V26UB respectively. The file
name is made up of the year, month, day, hour, minute, second, and
millisecond.
The time denoted by the file name is based on the time at the computer
and not the internal clock of VN-V25U/26U.
Motion images cannot be captured.
C Pause
D Setup
Pauses/Resumes playback of images.
Displays the built-in viewer settings window. (A Page 84)
This setting screen is used to set the built-in viewer as a software on the
computer.
Caution:
● Settings on this setting screen do not affect settings of the VN-V25U/
26U unit.
E Speech
Starts sending audio to VN-V26U from the client PC. Only one stream of
audio can be sent for one unit of VN-V26U. You cannot send audio from
another client PC when transmission of audio from a client PC is in
progress.
(VN-V26U only)
● The [Speech] button lights up in red during audio transmission.
● [Speech] button will not blink in red when audio cannot be sent.
Note:
● The JPEG and MPEG4 viewers cannot send audio at the same time.
F Audio Setup
The audio setting screen appears. (A Page 94)
(VN-V26U only)
Caution:
● Settings on this setting screen do not affect settings of the VN-V26U
unit.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
A On Screen Display
For setting display items on the viewer screen.
For the JPEG Viewer, characters are displayed as overlay on the video
image.
Settings
Camera ID
Select AOnB to display [Camera ID].
[Camera ID] can be specified on the [Camera] page of VN-V25U/26U.
(A Page 39)
Display MD
Time
Selecting AOnB displays the area in which motion is detected in red.
Select AOnB to display the time.
This indicates the time that is stored in the JPEG data.
Format
Select the format for displaying time.
YYYY, MM, and DD denote year, month and day respectively, while HH,
MM, and SS denote hour, minute and second respectively. mm is
equivalent to 1/100 seconds.
B Stream Settings
For specifying settings for receiving JPEG stream.
Stream
For selecting the protocol when the viewer acquires data from VN-V25U/
26U.
VN-V25U/26U may be monitored using multiple viewers when
AMulticastB is selected.
When playing back via multicast., start multicast sending on the
[Streaming] page of the VN-V25U/26U unit.
Caution:
● When the built-in viewer is launched with AMulticastB specified, a
Windows firewall warning may appear. In this case, select AunblockB
and proceed.
● If AblockB is selected, the Windows firewall will block the multicast
stream and playback of multicast by the viewer will fail.
HTTP Port
You can change the HTTP port number.
The default port number setting is 80.
Specify the same value as the parameter that is set on the Protocol page
of VN-V25U/26U. (A Page 63)
Frame Rate
For selecting the acquisition frame rate of the viewer.
Selecting a large frame rate will increase the processing load of the
computer on which the viewer is running.
Caution:
● Set to a rate such that the CPU burden of the computer does not
exceed 80 %. When the CPU is overloaded, the computer may not
function properly.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Operation of Built-in Viewer
(continued)
JPEG Viewer Configuration (continued)
Multicast IP
Address
You can change the multicast IP address.
The default IP address setting is 225.0.1.1.
Multicast Port
You can change the multicast port number.
The default port number setting is 49152.
This is enabled when AStartB is selected for the [JPEG Control] item on
the [Streaming] page.
Specify the same value as the parameter that is set on the [Streaming]
page of VN-V25U/26U. (A Page 65)
C Folder Name
For specifying the name of the folder in which the captured files are
stored. (When the viewer is installed: The folder names for VN-V25U and
VN-V26U are VN-V25 and VN-V26 respectively.)
D OK
Saves the changed settings.
Click the [OK] button to enable the new settings and restart the built-in
viewer after closing the setting window.
E Cancel
Cancels the changed settings and closes the setting screen.
Note:
Note:
● The settings of the built-in viewer are stored
Searching and deleting cookie files
in the file named Cookie.
● Open [Tool]-[Internet Options]-[Advanced]
of the Internet Explorer, and press the
[Settings] button under [Temporary Internet
Files]. A new [Settings] will appear. Press the
[View Files] button in this window. The
[Temporary Internet Files] window opens up
and a list of files will be displayed. The file
named Acgi-binB in this list is the Cookie for
the built-in viewer.
This setting screen is used to set the built-in
viewer as a software on the computer, and
does not apply to settings of the VN-V25U/
26U unit.
When settings are changed, press the [OK]
button to exit and restart the viewer.
● Deleting this file deletes the view settings,
and the viewer will be initialized during the
next startup.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Exiting the JPEG Viewer
To exit, press the [close] button at the top right of the window.
Click [close].
● During the next startup of the built-in viewer, launch the Internet Explorer and enter the URL of the
built-in viewer in the address field.
For example, if the IP address of VN-V25U/26U is 192.168.0.2, enter as follows:
Ⅵ VN-V25U
http://192.168.0.2/cgi-bin/v25viewing.cgi?v25monitor_j.html
Ⅵ VN-V26U
http://192.168.0.2/cgi-bin/v26viewing.cgi?v26monitor_j.html
● After the [Security Settings] screen appears, press the [OK] button to proceed.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
A DisplaySize
B Pause
Switches the display size. (VGA or QVGA)
Pauses/Resumes playback of motion images.
C Setup
Displays the built-in viewer settings window. (A Page 90)
This setting screen is used to set the built-in viewer as a software on the
computer.
Caution:
● Settings on this setting screen do not affect settings of the VN-V25U/
26U unit.
D Speech
Starts sending audio to VN-V26U from the client PC. Only one stream of
audio can be sent for one unit of VN-V26U. You cannot send audio from
a different client PC when transmission of audio from a client PC is in
progress.
(VN-V26U only)
● The [Speech] button lights up in red during audio transmission.
● [Speech] button will not blink in red when audio cannot be sent.
Note:
● The JPEG and MPEG4 viewers cannot send audio at the same time.
E Audio Setup
The audio setting screen appears. (A Page 94)
(VN-V26U only)
Caution:
● Settings on this setting screen do not affect settings of the VN-V26U
unit.
Note:
● To use the built-in MPEG4 Viewer of VN-V25U/26U, install “ffdshow” that is open source codec. You
can download “ffdshow” from the Internet.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Operation of Built-in Viewer
(continued)
MPEG4 Viewer Configuration
The MPEG4 Viewer’s settings window appears upon clicking the [Setup] button of the viewer.
A
B
C
D
A Title Bar Display
For setting display items on the viewer screen.
For the MPEG4 Viewer, characters are displayed in the title bar of the
window.
Settings
Camera ID
Select AOnB to display [Camera ID].
[Camera ID] can be specified on the [Camera] page of VN-V25U/26U.
(A Page 39)
Time
Select AOnB to display the time.
Format
Select the format for displaying time.
YYYY, MM, and DD denote year, month and day respectively, while HH,
MM, and SS denote hour, minute and second respectively. mm is
equivalent to 1/100 seconds.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
B Stream Settings
For specifying settings for receiving MPEG4 stream.
Stream
For selecting the protocol when the viewer acquires data from VN-V25U/26U.
VN-V25U/26U may be monitored using multiple viewers when
AMulticastB is selected.
When playing back via multicast., start multicast sending on the
[Streaming] page of the VN-V25U/26U unit.
Caution:
● When the built-in viewer is launched with AMulticastB specified, a
Windows firewall warning may appear. In this case, select AunblockB
and proceed.
stream and playback of multicast by the viewer will fail.
HTTP Port
You can change the HTTP port number.
The default port number setting is 80.
Specify the same value as the parameter that is set on the [Protocol]
page of VN-V25U/26U. (A Page 63)
Multicast IP
Address
You can change the multicast IP address.
The default address is 225.0.2.1.
Multicast Port
You can change the multicast port number.
The default port number setting is 59152.
This is enabled when AStartB is selected for the [MPEG4 Control] item on
the [Streaming] page.
Specify the same value as the parameter that is set on the [Streaming]
page of VN-V25U/26U. (A Page 65)
C OK
Saves the changed settings.
Click the [OK] button to enable the new settings and restart the built-in
viewer after closing the setting window.
D Cancel
Cancels the changed settings and closes the setting screen.
Note:
● To use the built-in MPEG4 Viewer of VN-V25U/26U, install “ffdshow” that is open source codec. You
can download “ffdshow” from the Internet.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Note:
Operation of Built-in Viewer
(continued)
Searching and deleting cookie files
●
Open [Tool]-[Internet Options]-[Advanced] of
the Internet Explorer, and press the [Settings]
button under [Temporary Internet Files]. A new
[Settings] will appear. Press the [View Files]
button in this window. The [Temporary Internet
Files] window opens up and a list of files will be
Note:
● The settings of the built-in viewer are stored
in the file named Cookie.
displayed. The file named
is the Cookie for the built-in viewer.
● Deleting this file deletes the view settings,
and the viewer will be initialized during the
next startup.
Acgi-binB in this list
This setting screen is used to set the built-in
viewer as a software on the computer, and
does not apply to settings of the VN-V25U/
26U unit.
When settings are changed, press the [OK]
button to exit and restart the viewer.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Exiting the MPEG4 Viewer
To exit, press the [close] button at the top right of the window.
Click [close].
● During the next startup of the built-in viewer, launch the Internet Explorer and enter the URL of the
built-in viewer in the address field.
For example, if the IP address of VN-V25U/26U is 192.168.0.2, enter as follows:
Ⅵ VN-V25U
http://192.168.0.2/cgi-bin/v25viewing.cgi?v25monitor_m.html
Ⅵ VN-V26U
http://192.168.0.2/cgi-bin/v26viewing.cgi?v26monitor_m.html
● After the [Security Settings] screen appears, press the [OK] button to proceed.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
A Receive Setup
For specifying settings related to receiving of audio sent from VN-V26U.
Receive
For specifying whether to receive audio.
Select AOnB to to receive audio.
Note:
● A mechanical sound (that sounds when infrared ray filter is being
plugged or unplugged) will sound when black-and-white mode is
been switched. During the period where the sound is active, other
sounds from VN-V26U will be muted.
Stream
For selecting the stream protocol of the received audio.
When AHTTPB is selected, lost packets are recovered via resending.
When AMulticastB is selected, the audio of VN-V26U may be monitored
using a multiple number of client PCs. When receiving data via multicast,
start multicast sending on the [Streaming] page of the VN-V26U unit.
Caution:
● When the built-in viewer is launched with AMulticastB specified, a
Windows firewall warning may appear. In this case, select AunblockB
and proceed.
● If AblockB is selected, the Windows firewall will block the multicast
stream and playback of multicast by the viewer will fail.
Multicast IP
Address
You can change the multicast IP address.
The default address is 225.0.3.1
Specify the same value as the parameter that is set on the [Streaming]
page of VN-V26U.(A Page 65)
Multicast Port
The default port number setting is 39152.
Specify the same value as the parameter that is set on the [Streaming]
page of VN-V26U.(A Page 65)
B Speech Setup
For specifying settings for sending audio to VN-V26U from the computer.
Destination Port You can change the destination port for sending audio to VN-V26U from
the computer. The default port number setting is 49298.
Operator
password
For entering the operator password when sending audio to VN-V26U
from the computer.
C HTTP Port
You can change the port number that is used to get audio via HTTP. The
default port number setting is 80.
Specify the same value as the parameter that is set on the Protocol page
of VN-V26U. (A Page 63)
D OK
Saves the changed settings.
Click the [OK] button to enable the new settings and restart the built-in
viewer after closing the setting window.
E Cancel
Cancels the changed settings and closes the setting screen.
Note:
● Settings of the built-in-viewer are stored in the file named Cookie.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Note:
Operation of Built-in Viewer
(continued)
● Before starting up the built-in viewer using
the shortcut, close all Internet Explorer
windows. Starting up the built-in viewer using
the shortcut while leaving other Internet
Explorer windows opened may result in
malfunction of the built-in viewer.
Shortcut for Built-in Viewer
Creating a shortcut for the built-in viewer on the
Desktop screen of the computer saves you the
trouble of having to enter the URL in the Internet
Explorer.
Create the shortcut by following the procedure
below.
1.Launch the Internet Explorer
2.Right-click at an arbitrary point on the
Internet Explorer screen and select
[Create Shortcut]
Click the [OK] button on the confirmation
screen and a shortcut will be created on the
Desktop screen.
3.Right-click on the shortcut icon on the
Desktop screen and select Properties
The setting screen appears.
4.Enter the URL of the built-in viewer in the
URL field
For example, if the IP address of VN-V25U/
26U is 192.168.0.2, enter as follows:
ⅥVN-V25U
● JPEG Viewer
http://192.168.0.2/cgi-bin/
v25viewing.cgi?v25monitor_j.html
● MPEG4 Viewer
http://192.168.0.2/cgi-bin/
v25viewing.cgi?v25monitor_m.html
ⅥVN-V26U
● JPEG Viewer
http://192.168.0.2/cgi-bin/
v26viewing.cgi?v26monitor_j.html
● MPEG4 Viewer
http://192.168.0.2/cgi-bin/
v26viewing.cgi?v26monitor_m.html
5.Click the [OK] button to end
Clicking on the shortcut created saves you
the trouble of having to enter the URL in the
Internet Explorer.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting
Reference
Page
Symptom
Causes and Countermeasures
IP address of VN-V25U/26U
is unknown
● DHCP is AEnableB in default settings. IP address A Page 32
will be provided from DHCP server.
● If there is no DHCP server, VN-V25U/26U will
start using default IP address, 192.168.0.2, and
default subnet mask, 255.255.255.0.
● Search tool in attached CD-ROM is available to
find VN-V25U/26U from a PC in the same LAN.
The web page of VN-V25U/
26U cannot be displayed
Check the Internet Explorer settings.
When a proxy server is in use, configure the proxy
server settings of the Internet Explorer accordingly.
A Page 33
A Page 79
The built-in viewer cannot be Check the Internet Explorer settings.
installed
The built-in viewer consists of a software
component called ActiveX.
The ActiveX is usually installed when the built-in
viewer is used for the first time. However, installation
may be rejected depending on the Anti-virus
software settings. In this case, change the settings of
the Anti-virus software before installing the built-in
viewer.
Authentication by Verisign
Verisign’s electronic signature is stored in the built-
—
—
appears during installation of in viewer.
the built-in viewer
For computers with a network environment that is
connected to the Internet, the authenticity of the
viewer can be verified via authentication by
Verisign.
A warning message appears
upon starting up the built-in
viewer
The built-in viewer consists of a software
component called ActiveX.
The ActiveX is usually installed when the built-in
viewer is used for the first time. However, installation
may be rejected depending on the Anti-virus
software settings. In this case, change the settings of
the Anti-virus software before installing the built-in
viewer.
TCP images cannot be
played back
The maximum number of images that can be sent by A Page 24
VN-V25U/26U via TCP is 20, and up to 20 built-in
viewers can be connected to each VN-V25U/26U
unit.
Make use of multicast for monitoring when the
number of areas exceeds the above number.
VN-V25U/26U allows multicast transmission of
JPEG and MPEG4 one stream at a time.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting (continued)
Reference
Page
Symptom
Causes and Countermeasures
Multicast images cannot be
played back
● Start multicast transmission manually from the
[Streaming] page of VN-V25U/26U.
● In the case of multicast reception at the built-in
viewer, check that the multicast address and port
number of the built-in viewer settings coincide
with those on the [Streaming] page of VN-V25U/
26U.
A Page 64
A Page 84
A Page 90
Make use of a network that supports IGMPv2 for
multicast transmission.
● Multicast may be blocked by the WindowsXP
firewall. When this occurs, perform the following
to allow it to pass through.
Double-click [Windows Firewall] under [Start]-
[Control Panel], click the [Add Port…] button
under the Exception tab, and register the port
number to be allowed through the firewall in the
Port Number field. Enter an arbitrary character
string in the name field.
The frame rate of the
displayed image is low
● Check the built-in viewer settings when a built-in A Page 84
viewer is in use.
A Page 90
● Frame rate will be constrained when the network
bandwidth is narrow.
A white zone appears in the
built-in viewer
● For some computers, a part of the Internet
Explorer graphics may not appear and is left
white when the following setting is performed on
the Internet Explorer.
—
If [Right-click on the Desktop screen]-
[Properties]-[Settings]-[Advanced]-
[Advanced]-[DPI setting] is set to ALarge sizeB
or ACustom sizeB, select ANormal sizeB to
resume normal drawing.
Unable to receive alarm
notification using the
computer via TCP/UDP
● Data may be blocked by the WindowsXP
firewall. When this occurs, perform the following
to allow it to pass through.
Double-click [Windows Firewall] under [Start]-
[Control Panel], click the [Add Port…] button
under the Exception tab, and register the port
number to be allowed through the firewall in the
Port Number field. Enter an arbitrary character
string in the name field.
—
Images are not distributed to
the network
● Check whether the [MONITOR OUT] switch at
the side of VN-V25U/26U is set to ANTSCB or
APALB. If either of the above is selected, change
the [MONITOR OUT] switch setting to AOFFB.
After changing the switch settings, press the
[RESET] button to reboot.
A Page 11
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Page
Symptom
Causes and Countermeasures
The MPEG4 Viewer screen
appears in black
When DirectX 9.x or Windows Media Player 9.x is
installed on the computer, the video image screen
appears in black.
—
[Countermeasure]
To make use of the built-in MPEG4 Viewer of
VN-V25U/26U, install “ffdshow” that is open source
codec. You can download “ffdshow” from the
Internet.
No MONITOR OUT image
output
● Set the [MONITOR OUT] switch to ANTSCB or
APALB, and press the Reset button.
● When using the [MONITOR OUT] output, set the
privacy mask to AOffB.
A Page 11
A Page 56
Zonal noise occurs at the
When using the [MONITOR OUT] output, set the
A Page 56
A Page 19
bottom of the MONITOR OUT privacy mask to AOffB.
image
Images from the network are Set the [MONITOR OUT] switch to AOFFB, and
distorted
press the Reset button.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Horizontal resolution
: 400 TV lines (typ.)
Specifications
Audio compression format (VN-V26U)
: µ-law (64 kbps)
AD/DA 16 bits
Camera Unit
Pick-up element : 1/4-inch progressive scan
CCD
Fs = 8 kHz, mono
Network interface
: RJ-45
Effective pixels : Approx. 330,000 pixels
659 (H)
ן 494 (V) Lens Mount
: C/CS mount
100BASE-TX/10BASE-T/
FULL/HALF/Auto negotiation
supported
[Monitor Output]
Composite video x 1 (75 K, 1 Vp-p)
Minimum object illumination:
LAN Specifications
(VN-V25U)
: 1.0 lx (50 %, F1.2, AGC
Super)
Compliant with IEEE802.3, IEEE802.3u and
IEEE802.3af
: 0.5 lx (25 %, F1.2, AGC
Super)
Communication protocol
: TCP/IP, UDP, HTTP, FTP,
ICMP, ARP, RTP, DHCP,
SNTP, SMTP, IGMP
: 0.8 lx (50 %, F1.2, Easy Day
and Night ON)
: 0.4 lx (25 %, F1.2, Easy Day
and Night ON)
General
Minimum object illumination:
(VN-V26U) : 0.6 lx (50 %, F1.2, AGC
Alarm input
: No-voltage a contact input,
NPN open collector input,
low level, latch/momentary
(500 ms and above) (Circuit
current during low level:
1 mA; Applied voltage during
high level: DC 3.3 V)
Super)
: 0.3 lx (25 %, F1.2, AGC
Super)
: 0.06 lx (50 %, F1.2, AGC
Super, B&W Mode:
Black&White, Auto)
Alarm output
: NPN open collector output
(Allowable applied
voltage: DC 12 V;
Allowable inflow current:
50 mA)
: 0.03 lx (25 %, F1.2, AGC
Super, B&W Mode:
Black&White, Auto)
Video S/N ratio : 50 dB (Typ., 50 %, AGC
OFF, Enhance -5)
Internal memory : 8 MB
Supply voltage : AC 24 V 50 Hz/60 Hz
or PoE (DC -48 V)
Internal mike (VN-V26U)
Omnidirectional
Current consumption
Output Sensitivity:-43 dB (0 dB = 1 V/Pa)
Standard input level
: AC 24 V 0.35 A
PoE 115 mA (5.5 W)
Only while Infrared ray
cut filter is moving
(for VN-V26U)
: 85 dB 3 (SPL)
[Audio Output] (VN-V26U)
Line out
ן 1, (200 K Maximum 2.2 Vp-p) : AC 24 V 0.5 A
PoE 170 mA (8.2 W)
Mini jack ( R3.5 mono)
Ambient temperature
[Network Output]
: -10 °C ~ 50 °C (operation)
Image compression format
0 °C ~ 40 °C
(Recommended)
: JPEG, MPEG4
: 640
ן 480, 320ן 240 Frame size
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambient humidity
Mass
: 20 % RH _ 85 % RH
(without condensation)
: 480g (1.06 lbs) (VN-V25U)
: 530g (1.17 lbs) (VN-V26U)
Accessories/Attachments
: Start-up Guide ....................... 1
CD-ROM ................................ 1
Warranty Card (For USA)....... 1
Service Information Card
(For USA)............................. 1
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Dimension [Unit: mm (inch)]
VN-V25U
126 (5)
U1-32
115 (4-9/16)
65 (2-9/16)
MAC address
BF LOCK
42 (1-5/8)
66 (2-5/8)
1/4 – 20UNC
30 (1-3/16)
VN-V26U
126 (5)
U1-32
115 (4-9/16)
65 (2-9/16)
MAC address
BF LOCK
42 (1-5/8)
66 (2-5/8)
1/4 – 20UNC
30 (1-3/16)
T Specifications and appearance of this product are subject to changes for improvement without prior
notice.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
LST0674-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2008 Victor Company of Japan, Limited
|
Indesit Dishwasher IDF 125 User Manual
Ingersoll Rand Patio Umbrella SLB1200 User Manual
Insignia CRT Television NS R20C User Manual
Jacuzzi Indoor Furnishings BK37 User Manual
JAI Security Camera CV M50IR User Manual
JVC DVD Player TH S7 User Manual
JVC Stereo System XT UXG6 User Manual
Kenmore Water System 6253483400 User Manual
Kettler Baby Toy 08838 399 User Manual
KitchenAid Pasta Maker W10236413B User Manual