Dear Customer,
Thank you for purchasing this digital
video camera. Before use, please
read the safety information and
precautions contained in the pages
3 – 4 and 10 to ensure safe use of
this product.
ENGLISH
DIGITAL VIDEO CAMERA
6
GETTING STARTED
GR-DF540
VIDEO RECORDING &
PLAYBACK
19
Please visit our Homepage on the World Wide Web for
Digital Video Camera:
DIGITAL STILL CAMERA
(D.S.C.) RECORDING &
PLAYBACK
For Accessories:
28
37
57
66
ADVANCED FEATURES
REFERENCES
TERMS
To deactivate the demonstration,
set “DEMO MODE” to “OFF”.
(੬ pg. 37, 40)
INSTRUCTIONS
EN
LYT1448-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
3
SAFETY PRECAUTIONS
CAUTION:
To avoid electric
IMPORTANT (for owners in the U.K.)
Connection to the mains supply in the United
Kingdom.
shock or damage to
the unit, first firmly
insert the small end
of the power cord into
the AC Adapter until it
is no longer wobbly,
and then plug the
larger end of the
power cord into an
AC outlet.
DO NOT cut off the mains plug from this
equipment.
If the plug fitted is not suitable for the power
points in your home or the cable is too short to
reach a power point, then obtain an appropriate
safety approved extension lead or consult your
dealer.
BE SURE to replace the fuse only with an
identical approved type, as originally fitted,
and to replace the fuse cover.
CAUTIONS:
If nonetheless the mains plug is cut off be sure to
remove the fuse and dispose of the plug
immediately, to avoid possible shock hazard by
inadvertent connection to the mains supply.
If this product is not supplied fitted with a mains
plug then follow the instructions given below:
DO NOT make any connection to the Larger
Terminal coded E or Green.
● This camcorder is designed to be used with
PAL-type colour television signals. It cannot be
used for playback with a television of a different
standard. However, live recording and LCD
monitor/viewfinder playback are possible
anywhere.
● This product includes patented and other
proprietary technology and will operate only
with JVC Data Battery. Use the JVC
BN-VF707U/VF714U/VF733U battery packs
and, to recharge them or to supply power to the
camcorder from an AC outlet, use the provided
multi-voltage AC Adapter. (An appropriate
conversion adapter may be necessary to
accommodate different designs of AC outlets in
different countries.)
The wires in the mains lead are coloured in
accordance with the following code:
Blue to N (Neutral)
or Black
Brown to L (Live)
or Red
If these colours do not correspond with the
terminal identifications of your plug, connect as
follows:
Blue wire to terminal coded N (Neutral) or
coloured black.
Brown wire to terminal coded L (Live) or coloured
Red.
If in doubt — consult a competent electrician.
Caution on Replaceable lithium battery
The battery used in this device may present a fire
or chemical burn hazard if mistreated.
Do not recharge, disassemble, heat above 100°C
or incinerate.
Replace battery with Panasonic (Matsushita
Electric), Sanyo, Sony or Maxell CR2025.
Danger of explosion or Risk of fire if the battery is
incorrectly replaced.
● Dispose of used battery promptly.
● Keep away from children.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
CAUTIONS:
● To prevent shock, do not open the cabinet. No
user serviceable parts inside. Refer servicing to
qualified personnel.
● When you are not using the AC Adapter for a
long period of time, it is recommended that you
disconnect the power cord from AC outlet.
● Do not disassemble and do not dispose of in
fire.
NOTES:
● The rating plate (serial number plate) and
safety caution are on the bottom and/or the
back of the main unit.
● The rating information and safety caution of the
AC Adapter are on its upper and lower sides.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
EN
SOME DO’S AND DON’TS ON THE SAFE USE
OF EQUIPMENT
This equipment has been designed and
manufactured to meet international safety
standards but, like any electrical equipment,
care must be taken if you are to obtain the
best results and safety is to be assured.
When the equipment is installed in a cabinet or on
a shelf, make sure that it has sufficient space on
all sides to allow for ventilation (10 cm or more on
both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a
newspaper, or cloth etc. the heat may not be able
to get out.)
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
DO read the operating instructions before you
attempt to use the equipment.
When discarding batteries, environmental
problems must be considered and the local rules
or laws governing the disposal of these batteries
must be followed strictly.
The apparatus shall not be exposed to dripping or
splashing.
Do not use this equipment in a bathroom or
places with water.
Also do not place any containers filled with water
or liquids (such as cosmetics or medicines, flower
vases, potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this
equipment, fire or electric shock may be caused.)
DO ensure that all electrical connections (including
the mains plug, extension leads and
interconnections between pieces of equipment) are
properly made and in accordance with the
manufacturer’s instructions. Switch off and withdraw
the mains plug when making or changing
connections.
DO consult your dealer if you are ever in doubt
about the installation, operation or safety of your
equipment.
DO be careful with glass panels or doors on
equipment.
DON’T continue to operate the equipment if you are
in any doubt about it working normally, or if it is
damaged in any way — switch off, withdraw the
mains plug and consult your dealer.
Do not point the lens or the viewfinder directly into
the sun. This can cause eye injuries, as well as
lead to the malfunctioning of internal circuitry.
There is also a risk of fire or electric shock.
DON’T remove any fixed cover as this may expose
dangerous voltages.
CAUTION!
The following notes concern possible physical
damage to the camcorder and to the user.
DON’T leave equipment switched on when it is
unattended unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off using the switch on the equipment
and make sure that your family knows how to do
this. Special arrangements may need to be made
for infirm or handicapped people.
DON’T use equipment such as personal stereos or
radios so that you are distracted from the
requirements of road safety. It is illegal to watch
television whilst driving.
When carrying, be sure to always securely attach
and use the provided strap. Carrying or holding
the camcorder by the viewfinder and/or the LCD
monitor can result in dropping the unit, or in a
malfunction.
Take care not to get your finger caught in the
cassette holder cover. Do not let children operate
the camcorder, as they are particularly
susceptible to this type of injury.
DON’T listen to headphones at high volume, as
such use can permanently damage your hearing.
Do not use a tripod on unsteady or unlevel
surfaces. It could tip over, causing serious
damage to the camcorder.
DON’T obstruct the ventilation of the equipment, for
example with curtains or soft furnishings.
Overheating will cause damage and shorten the life
of the equipment.
DON’T use makeshift stands and NEVER fix legs
with wood screws — to ensure complete safety
always fit the manufacturer’s approved stand or legs
with the fixings provided according to the
instructions.
CAUTION!
Connecting cables (Audio/Video, S-Video, etc.) to
the camcorder and leaving it on top of the TV is
not recommended, as tripping on the cables will
cause the camcorder to fall, resulting in damage.
DON’T allow electrical equipment to be exposed to
rain or moisture.
ABOVE ALL
● NEVER let anyone especially children push
anything into holes, slots or any other opening in
the case — this could result in a fatal electrical
shock;
● NEVER guess or take chances with electrical
equipment of any kind — it is better to be safe
than sorry!
Download from Www.Somanuals.com. All Manuals Search And Download.
5
GETTING STARTED
Provided Accessories ..................................... 11
Power.............................................................. 13
Language Settings.......................................... 16
Date/Time Settings ......................................... 16
Tripod Mounting.............................................. 17
Loading/Unloading A Cassette ....................... 17
Loading/Unloading A Memory Card................ 18
ADVANCED FEATURES
Playback Menus ............................................. 41
VIDEO RECORDING & PLAYBACK
19
Live Slow ........................................................ 43
Wipe Or Fader Effects .................................... 48
Program AE With Special Effects ................... 48
Navigation Function........................................ 49
EDITING............................................................ 52
Dubbing To A VCR ......................................... 52
Dubbing To A Video Unit Equipped With A DV
Connector (Digital Dubbing) ....................... 53
Connection To A Personal Computer............. 54
Audio Dubbing ................................................ 55
Insert Editing................................................... 56
VIDEO RECORDING ........................................... 19
Basic Recording.............................................. 19
Tape Remaining Time ................................ 19
LCD Monitor And Viewfinder ...................... 19
Zooming...................................................... 20
Journalistic Shooting .................................. 20
Quick Review.............................................. 21
Recording From The Middle Of A Tape...... 21
VIDEO PLAYBACK ............................................. 22
Normal Playback............................................. 22
Still Playback .............................................. 22
Shuttle Search............................................ 22
Blank Search .............................................. 22
Connections To A TV Or VCR........................ 23
Playback Using The Remote Control.............. 25
DIGITAL STILL CAMERA (D.S.C.) RECORDING
& PLAYBACK
28
D.S.C. RECORDING............................................ 28
Basic Shooting (D.S.C. Snapshot).................. 28
Interval Shooting......................................... 29
D.S.C. PLAYBACK.............................................. 29
Normal Playback Of Images........................... 29
Auto Playback Of Images ............................... 30
Playback Of Video Clips ................................. 30
Index Playback Of Files.................................. 30
Viewing File Information ................................. 30
Removing On-Screen Display ........................ 31
REFERENCES
57
TROUBLESHOOTING.......................................... 57
USER MAINTENANCE......................................... 61
CAUTIONS ........................................................ 62
SPECIFICATIONS................................................ 65
TERMS
66
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
7
Controls
a Menu Button [MENU] (੬ pg. 37)
Data Battery Button [BATT. DATA] (੬ pg. 14)
B E-Mail Clip Recording Button [E-MAIL]
(੬ pg. 32)
(੬ pg. 54)
Index Button [INDEX] (੬ pg. 30)
C D.S.C. Playback Select Button [SEL]
(੬ pg. 29, 30)
Thumbnail Storing Button [STORE]
(੬ pg. 49)
D Information Button [INFO] (੬ pg. 30)
E Set Button [SET] (੬ pg. 37)
F Fast-Forward Button [5] (੬ pg. 22)
LED Light Button [LIGHT] (੬ pg. 43)
Right Button [>] (੬ pg. 37)
* i.Link refers to the IEEE1394-1995 industry
specification and extensions thereof. The logo
standard.
X DC Input Connector [DC] (੬ pg. 13)
G Stop Button [8] (੬ pg. 22)
Backlight Compensation Button [BACK
LIGHT] (੬ pg. 46)
Indicators
Y POWER/CHARGE Lamp (੬ pg. 13, 19)
Down Button [ ] (੬ pg. 37)
Other Parts
H Rewind Button [3] (੬ pg. 22)
Quick Review Button [Q.REVIEW] (੬ pg. 21)
Left Button [<] (੬ pg. 37)
a Shoe
I VIDEO/MEMORY Switch (੬ pg. 15)
J Play/Pause Button [4/9] (੬ pg. 22)
Manual Focus Button [FOCUS] (੬ pg. 45)
Up Button [ ] (੬ pg. 37)
K Dioptre Adjustment Control (੬ pg. 16)
L Battery Release Button [BATT. RELEASE]
(੬ pg. 14)
(Before you purchase optional shoe
accessories, make sure the items are
compatible and can attach to the shoe on
your camcorder. There may be cases where a
part of an accessory item obtrudes onto the
camcorder’s body, preventing attachment to
your unit.)
M Snapshot Button [SNAPSHOT]
(੬ pg. 28, 44)
b Viewfinder (੬ pg. 16)
c Speaker (੬ pg. 22)
Live Slow Button [SLOW] (੬ pg. 37, 43)
N Power Zoom Lever [T/W] (੬ pg. 20)
Speaker Volume Control [VOL. +, –]
(੬ pg. 22)
O Cassette Open/Eject Switch [OPEN/EJECT]
(੬ pg. 17)
P Recording Start/Stop Button (੬ pg. 19)
Q Power Switch [A, M, PLAY, OFF] (੬ pg. 15)
R Lock Button (੬ pg. 15)
d Battery Pack Mount (੬ pg. 14)
e Cassette Holder Cover (੬ pg. 17)
f Lens
g LED Light (੬ pg. 43)
(When using an optional conversion lens, it
may cover this area and block the light.)
h Remote Sensor (੬ pg. 25)
i Camera Sensor
(Be careful not to cover this area, a sensor
necessary for shooting is built-in here.)
j Stereo Microphone (੬ pg. 55)
k Shoulder Strap Eyelet (੬ pg. 12)
l Grip Strap (੬ pg. 16)
m Card Cover [MEMORY CARD] (੬ pg. 18)
n Tripod Mounting Socket (੬ pg. 17)
o Stud Hole (੬ pg. 17)
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
8
EN
During D.S.C. Recording Only
During Video Recording Only
34
5
6
1
2345 6
7
1024
15
1h40m
7
REC
8
9
0
(1152 x 864), 1024 (1024 x 768) or 640
B
: Interval Shooting Icon (੬ pg. 28)
: Focus Icon (੬ pg. 28)
q
r
e
SOUND 12BIT
15:55
C Shooting Icon (੬ pg. 28)
(Appears and blinks during shooting.)
D Card Icon (੬ pg. 28)
w
a Navigation Indicator (੬ pg. 49)
B Selected Wipe/Fader Effect Indicator
(੬ pg. 48)
(Rotates while tape is running.)
D Selected Wide Mode Indicator (੬ pg. 39)
: Appears during shooting.
not loaded.
: Blinks in yellow while the camcorder is
reading the data in the memory card such as
Navigation thumbnail images, video clips, still
images, etc.
E
: Live Slow Indicator (੬ pg. 43)
: Snapshot Indicator (੬ pg. 44)
E Picture Quality:
(FINE) and
(STANDARD) (in order of quality) (੬ pg. 41)
(Displays the approximate remaining number
of shots that can be stored during D.S.C.
recording.)
F Recording Speed Mode (SP/LP) (੬ pg. 38)
G Tape Remaining Time (੬ pg. 19)
H REC: (Appears during recording.) (੬ pg. 19)
PAUSE: (Appears during Record-Standby
mode.) (੬ pg. 19)
G Clock Icon (੬ pg. 28)
I Insert Editing/Insert Editing Pause Mode
(੬ pg. 56)
J 5S/Anim.: Displays the 5-Second Recording
mode or Animation recording mode.
(੬ pg. 39)
K Wind Cut Indicator (੬ pg. 39)
L Time Code (੬ pg. 40, 42)
During E-Mail Clip Recording
160
E-
CL IP
0
h
1: 0
m
00 : 15
M Digital Image Stabiliser (“DIS”) (੬ pg. 39)
N SOUND 12BIT/16BIT: Sound Mode Indicator
(੬ pg. 38) (Appears for approx. 5 seconds
after turning on the camcorder.)
a Image Size: 160 (160 x 120)
b Shooting Icon (੬ pg. 28, 32)
c E-Mail Clip Recording Indicator (੬ pg. 32)
d Memory Card Remaining Time For E-Mail
Clip Recording (੬ pg. 32)
: Auxiliary Microphone Level
Indicator
L
R
(Appears when an optional microphone is
connected. ੬ pg. 40, “AUDIO LEV.”)
e E-Mail Clip Recording Time (੬ pg. 32)
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
During Video Playback
EN
9
During Both Video And D.S.C. Recording
1
2
3 4 5
6
8
9
12B I T / M I X
L
1
2
1
5
x
W
T
O
0
MIC
3
BLANK SEARCH
TO CANCEL
4
5
6
q
w
50m
50m
7
BRIGHT
VOLUME
7
q
R
1 0
.
11. 05
10: 0 0
10
.
11. 05
20 : 21 : 25
0
9
r
a Operation Mode (੬ pg. 15)
: Gain Up Mode (੬ pg. 38)
a Sound Mode Indicator (੬ pg. 41)
: Live Slow Indicator (੬ pg. 43)
: Snapshot Indicator (੬ pg. 44)
E 4: Playback
5: Fast-Forward/Shuttle Search
3: Rewind/Shuttle Search
9: Pause
9 U: Forward Frame-By-Frame Playback/
Slow-Motion
Y 9: Reverse Frame-By-Frame Playback/
Slow-Motion
D: Audio Dubbing
B
C LED Light Indicator (੬ pg. 43)
C
E
: Spot Exposure Control Indicator
(੬ pg. 46)
: Backlight Compensation Indicator
(੬ pg. 46)
: Exposure Adjustment Indicator (੬ pg. 45)
F Selected Program AE With Special Effects
Indicator (੬ pg. 48)
: Night-Scope Indicator (੬ pg. 44)
G Iris Lock Indicator (੬ pg. 46)
H Approximate Zoom Ratio (੬ pg. 20)
I Zoom Indicator (੬ pg. 20)
J O: (Appears when taking Snapshot.)
(੬ pg. 29, 44)
SLOW: (Appears when using Live Slow.)
(੬ pg. 43)
K Brightness Control Indicator (LCD monitor/
Viewfinder) (੬ pg. 17)
L Battery Remaining Power Indicator
(੬ pg. 59)
9D: Audio Dubbing Pause
(Appear while a tape is running.)
F Sound Input For Audio Dubbing (੬ pg. 55)
G Battery Remaining Power Indicator
(੬ pg. 59)
H Date/Time (੬ pg. 40, 42)
I VOLUME: Volume Level Indicator (੬ pg. 22)
BRIGHT: Brightness Control Indicator (LCD
monitor/Viewfinder) (੬ pg. 17)
J Time Code (੬ pg. 40, 42)
M Date/Time (੬ pg. 16)
N Manual Focus Adjustment Indicator
(੬ pg. 45)
K
: Auxiliary Microphone Level
Indicator
(Appears when an optional microphone is
L
R
connected during Audio Dubbing. ੬ pg. 55)
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
10
Use SP (Standard) mode for important video
recordings.
LP (Long Play) mode lets you record 50% more
video than SP (Standard) mode, but you may
experience mosaic-like noise during playback
depending on the tape characteristics and the
usage environment.
During D.S.C. Playback
1
2
100-0013
50m
So, for important recordings, we recommend using
SP mode.
BR I GHT
It is recommended that you use JVC brand
cassette tapes.
Your camcorder is compatible with all brands of
commercially available cassette tapes complying
with the MiniDV standard, but JVC brand cassette
tapes are designed and optimized to maximize the
performance of your camcorder.
4
3
a Operation Mode Indicator (੬ pg. 31)
B Folder/File Number (੬ pg. 31)
C Battery Remaining Power Indicator
(੬ pg. 59)
Also read “CAUTIONS” on pages 62 – 64.
D Brightness Control Indicator (LCD monitor/
Viewfinder) (੬ pg. 17)
®
®
● Microsoft and Windows are either registered
trademarks or trademarks of Microsoft
Corporation in the United States and/or other
countries.
Before Using This Camcorder
Make sure you only use cassettes with the Mini
● Macintosh is a registered trademark of Apple
Computer, Inc.
● QuickTime is a registered trademark of Apple
Computer, Inc.
DV mark
Make sure you only use memory cards with the
mark or
.
.
This camcorder is designed exclusively for the
digital video cassette, SD Memory Card and
MultiMediaCard. Only cassettes marked “
” and
memory cards marked “
” or
“
” can be used with this unit.
Remember that this camcorder is not
compatible with other digital video formats.
Remember that this camcorder is intended for
private consumer use only.
Any commercial use without proper permission is
prohibited. (Even if you record an event such as a
show, performance or exhibition for personal
enjoyment, it is strongly recommended that you
obtain permission beforehand.)
Before recording important video, be sure to
make a trial recording.
Play back your trial recording to make sure the
video and audio have been recorded properly.
We recommend cleaning your video heads
before use.
If you haven’t used your camcorder for a while, the
heads may be dirty. We recommend periodically
cleaning the video heads with a cleaning cassette
(optional).
Be sure to store your cassette tapes and
camcorder in the proper environment.
Video heads can become dirty more easily if your
cassette tapes and camcorder are stored in a dusty
area. Cassette tapes should be removed from the
camcorder and stored in cassette cases. Store the
camcorder in a bag or other container.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
11
NOTES:
Provided Accessories
● In order to maintain optimum performance of the
camcorder, provided cables may be equipped with
one or more core filter. If a cable has only one core
filter, the end that is closest to the filter should be
connected to the camcorder.
OR
connections. Do not use any other cables.
How To Attach The Lens Cap
To protect the lens, attach
the provided lens cap to the
camcorder as shown in the
illustration.
NOTE:
To confirm the lens cap is on
correctly make sure the cap is
flush to the camcorder.
a AC Adapter AP-V17E or AP-V14E
b Power Cord (only for AP-V14E)
c Battery Pack BN-VF707U
d AV Cable
e Audio Extension Cable (for optional
microphone, ੬ pg. 12 for connection)
f USB Cable
Place here during
shooting.
g Core Filter [large] (for USB cable ੬ pg. 13
for attachment)
h Core Filter [small] x 3 (for Audio extension
cable and AC Adapter’s cable ੬ pg. 13 for
attachment)
i Core Filter (for AV cable ੬ pg. 13 for
attachment)
j CD-ROM
k Cable Adapter
l Remote Control Unit RM-V720U
m Lithium Battery CR2025* (for remote control
unit)
n Shoulder Strap (੬ pg. 12 for attachment)
o Lens Cap (see the right column for
attachment)
* A lithium battery is pre-installed in the Remote
Control Unit at time of shipment (with insulation
sheet). To use the Remote Control Unit, remove
the insulation sheet.
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
12
How To Attach The Shoulder Strap
How To Use The Audio Extension Cable
Follow the illustration.
When using an optional external microphone,
connect to the provided Audio extension cable
(with a core filter attached), then connect the
Audio extension cable to the camcorder. The
core filter reduces interference. (੬ pg. 13)
1 Thread the strap through the eyelet.
2 Fold it back and thread it through the strap
guide and the buckle.
● To adjust the length of the strap, loosen and then
tighten the strap in the buckle.
3 Slide the strap guide fully towards the eyelet.
Open the
cover.
Buckle
Strap guide
2
To MIC
Audio extension
Core filter
Eyelet
3
cable (provided)
1
Stereo
microphone
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
13
How To Attach The Core Filter
Attach the core filters to the cables. The core
filter reduces interference.
Power
This camcorder’s 2-way power supply system
lets you choose the most appropriate source of
power. Do not use provided power supply units
with other equipment.
1 Release the stoppers on both ends of the
core filter.
Charging The Battery Pack
BATT. RELEASE
Open the cover.
Stopper
2 Run the cable through the core filter, leaving
approx. 3 cm of cable between the cable plug
and the core filter.
Battery pack
To
DC connector
Wind the cable once around the outside of the
core filter as shown in the illustration.
Core filter
3 cm
Arrow
Battery pack mount
mark
AC Adapter
(ex. AP-V14E)
Power switch
Wind once.
POWER/CHARGE
lamp
3 Close the core filter until it clicks shut.
Power cord
To AC outlet
NOTES:
1 Set the Power Switch to “OFF”.
● Take care not to damage the cable.
● When connecting a cable, attach the end with the
core filter to the camcorder.
2 With the arrow on the battery pack pointing
right, push the battery pack slightly against the
battery pack mount a.
3 Slide the battery pack to the right until it locks
in place b.
4 Connect the AC Adapter to the camcorder.
5 Connect the Power Cord to the AC Adapter
(AP-V14E only).
6 Plug the AC Adapter into an AC outlet. The
POWER/CHARGE lamp on the camcorder
blinks to indicate charging has started.
7 When the POWER/CHARGE lamp goes out,
charging is finished. Unplug the AC Adapter
from the AC outlet. Disconnect the AC Adapter
from the camcorder.
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
14
To detach the battery pack
Using The Battery Pack
Perform steps 2 – 3 in “Charging The Battery
Pack”.
Slide the battery pack to the left while pressing
BATT. RELEASE to detach it.
Battery pack
BN-VF707U*
Charging time
Approx. 1 hr. 30 min.
Approx. 2 hr. 40 min.
Approx. 5 hr. 40 min.
Maximum continuous recording time
Battery pack LCD monitor on
BN-VF707U* 1 hr.
Viewfinder on
1 hr. 15 min.
2 hr. 35 min.
6 hr. 5 min.
BN-VF714U
BN-VF733U
* Provided
BN-VF714U
BN-VF733U
* Provided
NOTES:
2 hr. 5 min.
4 hr. 50 min.
NOTES:
● This product includes patented and other
proprietary technology and will operate only
with JVC Data Battery. Use the JVC BN-
VF707U/VF714U/VF733U battery packs. Using
generic non-JVC batteries can cause damage
to the internal charging circuitry.
● Recording time is reduced significantly under the
following conditions:
• Zoom or Record-Standby mode is engaged
repeatedly.
● If the protective cap is attached to the battery
pack, remove it first.
● During charging, the camcorder cannot be
• The LCD monitor is used repeatedly.
• The playback mode is engaged repeatedly.
• The LED Light is used.
● Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.
operated.
● Charging is not possible if the wrong type of
battery is used.
● When charging the battery pack for the first time
or after a long storage period, the POWER/
CHARGE lamp may not light. In this case, remove
the battery pack from the camcorder, then try
charging again.
ATTENTION:
Before detaching the power source, make sure that
the camcorder’s power is turned off. Failure to do so
can result in a camcorder malfunction.
● If the battery operation time remains extremely
short even after having been fully charged, the
battery is worn out and needs to be replaced.
Please purchase a new one.
● Since the AC Adapter processes electricity
internally, it becomes warm during use. Be sure to
use it only in well-ventilated areas.
● Using the optional AA-VF7 Battery Charger, you
can charge the BN-VF707U/VF714U/VF733U
battery pack without the camcorder.
● After 5 minutes has elapsed in Record-Standby
mode with the cassette inserted, the camcorder
will automatically turn off its power supplied from
the AC adapter. In this case, the battery charge
starts if the battery is attached to the camcorder.
Data Battery System
You can check the remaining battery power and
the recordable time.
1) Make sure the battery is attached and the
Power Switch is set to “OFF”.
2) Open the LCD monitor fully.
3) Press BATT. DATA, and the battery status
screen appears.
● It can be displayed on the viewfinder when the
LCD monitor is closed.
● It is displayed for 5 seconds if the button is
pressed and released quickly, and for 15
seconds if the button is pressed and hold for
several seconds.
● If “COMMUNICATION ERROR” appears
instead of the battery status even though you
tried to press BATT. DATA several times, there
may be a problem on the battery. In such a
case, consult your nearest JVC dealer.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
15
Using AC Power
Perform steps 4 – 5 in “Charging The Battery
Pack”.
M (Manual Recording):
Allows you to set various recording functions
using the Menus. (੬ pg. 37)
If you want more creative capabilities than Full
Auto Recording, try this mode.
NOTE:
The provided AC Adapter features automatic
voltage selection in the AC range from 110 V to
240 V.
OFF:
Allows you to switch off the camcorder.
PLAY:
About Batteries
● Allows you to play back a recording on the
tape.
DANGER! Do not attempt to take the batteries
apart, or expose them to flame or excessive
heat, as it may cause a fire or explosion.
WARNING! Do not allow the battery or its
terminals to come in contact with metals, as this
can result in a short circuit and possibly start a
fire.
● Allows you to display a still image stored in
the memory card or to transfer a still image
stored in the memory card to a PC.
● Allows you to set various playback functions
using the Menus. (੬ pg. 37)
To resume the original function of the
accurate battery power indication
VIDEO/MEMORY Switch Position
VIDEO:
If the battery power indication differs from the
actual operating time, fully charge the battery, and
then run it down. However this function may not
turn back if the battery was used for a long period
of time under extremely high/low temperature
condition or charged too many times.
Allows you to record on a tape or play back a
tape. If “REC SELECT” is set to “
/
”
(੬ pg. 41), still images are recorded both on
the tape and the memory card.
MEMORY:
● Allows you to record in a memory card or
access data stored in a memory card.
● When the Power Switch is set to “A” or “M”,
Operation Mode
To turn on the camcorder, set the Power Switch
to any operation mode except “OFF” while
pressing down the Lock Button located on the
switch.
the currently selected image size appears.
Power-Linked Operation
When the Power Switch is set to “A” or “M”, you
can also turn on/off the camcorder by opening/
closing the LCD monitor or pulling out/pushing in
the viewfinder.
Power Switch
Lock Button
INFORMATION:
The following explanations in this manual
supposes the use of LCD monitor in your
operation. If you want to use the viewfinder,
close the LCD monitor and pull out the
viewfinder fully.
POWER/
CHARGE lamp
VIDEO/MEMORY
Choose the appropriate operation mode
according to your preference using the Power
Switch and VIDEO/MEMORY Switch.
Power Switch Position
A (Full Auto Recording):
Allows you to record using NO special effects
or manual adjustments. Suitable for standard
recording.
The “A” indicator appears on the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
16
Language Settings
Grip Adjustment
The language on the display can be changed.
1 Adjust the velcro strip.
(੬ pg. 37, 40, 42)
2 Pass your right hand
through the loop and grasp
the grip.
1 Set the Power Switch to “M” while pressing
down the Lock Button located on the switch.
3 Adjust your thumb and
fingers through the grip to
easily operate the
Recording Start/Stop
2 Open the LCD monitor fully. (੬ pg. 19)
3 Press MENU. The Menu Screen appears.
CAMERA DISPLAY
4 Press or to select
BRIGHT
“n”, and press SET. The
CAMERA DISPLAY Menu
appears.
ON SCREEN
DATE / T I ME
T I ME CODE
LANGUAGE
AUD I O LEV .
CLOCK
–
–
–
–
–
LCD / TV
AUTO
OFF
ENGLISH
ON
sure to fasten the velcro strip to your preference.
20. 1 2. 0 5
1
ADJ .
7
:
3 0
5 Press or to select
“LANGUAGE”, and press
SET.
RETURN
Viewfinder Adjustment
1 Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
CAMERA DISPLAY
ENGLISH
6 Press or to select
the desired language, and
press SET.
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
–
LANGUAGE
2 Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully and adjust it
manually for best viewability.
7 Press or to select
“BRETURN”, and press
SET twice. The Menu
Screen closes.
NEDERLANDS
PORTUGUÊS
РУССКИЙ
3 Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
Date/Time Settings
Dioptre Adjustment Control
Example:
The date/time is recorded onto the tape at all
times, but its display can be turned on or off
during playback. (੬ pg. 37, 42)
1 Perform steps 1 – 4 in “Language Settings”
above.
2 Press or to select “CLOCK ADJ.”, and
press SET. The parameter for “Day” is
highlighted.
PAUSE
CAMERA DISPLAY
3 Press or to input
the day, and press SET.
Repeat to input the month,
year, hour and minute.
CAUTION:
When retracting the viewfinder, take care not to
pinch your fingers.
CLOCK
ADJ .
20. 1 2. 0 5
3 0
1
7
:
4 Press or to select
“BRETURN”, and press
SET twice. The Menu
Screen closes.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
17
Brightness Adjustment Of The
Display
Loading/Unloading A Cassette
The camcorder needs to be powered up to load
or eject a cassette.
1 Set the Power Switch
MENU
Cassette holder cover
to “M” or “PLAY” while
pressing down the Lock
Button located on the
switch.
PUSH HERE
OPEN/EJECT
Erase
protection tab
2 Open the LCD monitor
fully. (੬ pg. 19)
● To adjust the brightness of
the viewfinder, pull out the
viewfinder fully and set
“PRIORITY” to “FINDER”
(੬ pg. 37, 40).
<
SET
>
3 Press MENU. The
Cassette holder
BRIGHT
Menu Screen appears.
Make sure the window side is facing out.
4 Press or to select “n”, and press SET.
The CAMERA DISPLAY Menu appears.
1 Slide and hold OPEN/EJECT in the direction
of the arrow, then pull the cassette holder cover
open until it locks. The cassette holder opens
automatically.
5 Press or to select “BRIGHT”, and press
SET. The Menu Screen closes and the
brightness control indicator appears.
● Do not touch internal components.
6 Press < or > until the appropriate brightness
2 Insert or remove a tape and press “PUSH
HERE” to close the cassette holder.
● Be sure to press only the section labelled “PUSH
HERE” to close the cassette holder; touching
other parts may cause your finger to get caught in
the cassette holder, resulting in injury or product
damage.
● Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely
before closing the cassette holder cover.
● When the battery pack’s charge is low, you may
not be able to close the cassette holder cover. Do
not apply force. Replace the battery pack with a
fully charged one or use AC power before
continuing.
is reached.
7 Press MENU to clear the brightness control
indicator from the display.
Tripod Mounting
To attach the
camcorder to a tripod,
align the direction stud
and screw to the
mounting socket and
stud hole on the
camcorder. Then
tighten the screw
clockwise.
3 Close the cassette holder cover firmly until it
● Some tripods are not
equipped with studs.
locks into place.
To protect valuable recordings
Slide the erase protection tab on the back of the
tape in the direction of “SAVE”. This prevents the
tape from being recorded over. To record on this
tape, slide the tab back to “REC” before loading
it.
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
18
NOTES:
NOTES:
● If you wait a few seconds and the cassette holder
does not open, close the cassette holder cover
and try again. If the cassette holder still does not
open, turn the camcorder off then on again.
● If the tape does not load properly, open the
cassette holder cover fully and remove the
cassette. A few minutes later, insert it again.
● When the camcorder is suddenly moved from a
cold place to a warm environment, wait a short
time before opening the cassette holder cover.
● Some brands of memory cards are not compatible
with this camcorder. Before purchasing a memory
card, consult its manufacturer or dealer.
● Before using a new memory card, it is necessary
to format the card. (੬ pg. 36)
ATTENTION:
Do not insert or remove the memory card while the
camcorder is turned on, as this may cause the
memory card to be corrupted or cause the
camcorder to become unable to recognise whether
or not the card is installed.
Loading/Unloading A Memory
Card
Memory card
(optional)
Clipped edge
Card Cover
(MEMORY CARD)
Write/erase protection tab
Label
1 Make sure the camcorder’s power is off.
2 Open the card cover (MEMORY CARD).
3 To load a memory card, firmly insert it with
its clipped edge first.
To unload a memory card, push it once. After
the memory card comes out of the camcorder,
pull it out.
● Do not touch the terminal on the reverse side of
the label.
4 Close the card cover.
To protect valuable files (available only for
SD Memory Card)
Slide the write/erase protection tab on the side
of the memory card in the direction of “LOCK”.
This prevents the memory card from being
recorded over. To record on this memory card,
slide the tab back to the position opposite to
“LOCK” before loading it.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO RECORDING
EN
19
NOTES:
Basic Recording
● If the Record-Standby mode continues for
5 minutes, the camcorder’s power shuts off
automatically. To turn the camcorder on again,
push back and pull out the viewfinder again or
NOTE:
Before continuing, perform the procedures listed
below:
● Power (੬ pg. 13)
● Loading A Cassette (੬ pg. 17)
● When a blank portion is left between recorded
scenes on the tape, the time code is interrupted
and errors may occur when editing the tape. To
avoid this, refer to “Recording From The Middle Of
A Tape” (੬ pg. 21).
VIDEO/MEMORY
Power Zoom Lever
Power Switch
● To turn the beep sounds off, ੬ pg. 37, 39.
Tape Remaining Time
Approximate tape remaining
“– h – – m” means the
Recording Start/Stop Button
camcorder is calculating the
remaining time. When the
remaining time reaches 2 minutes, the indication
starts blinking.
● The time required to calculate and display the
remaining tape length, and the accuracy of the
calculation, may vary according to the type of tape
used.
Lock Button
POWER/CHARGE Lamp
1 Remove the lens cap. (੬ pg. 11)
2 Open the LCD monitor fully.
LCD Monitor And Viewfinder
While using the LCD monitor:
3 Set the VIDEO/MEMORY Switch to “VIDEO”.
Make sure the viewfinder is pushed back in. Pull
4 Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
on the end
of the LCD monitor and open the
LCD monitor fully. It can rotate 270° (90°
downward, 180° upward).
● The POWER/CHARGE lamp lights and the
camcorder enters the Record-Standby mode.
“PAUSE” is displayed.
While using the viewfinder:
Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully.
● To record in LP (Long Play) mode, ੬ pg. 38.
5 To start recording, press the Recording Start/
Stop Button. “T REC” appears on the display
while recording is in progress.
180˚
6 To stop recording, press the Recording Start/
Stop Button again. The camcorder re-enters the
Record-Standby mode.
Approximate recording time
90˚
Recording mode
Tape
SP
LP
45 min.
30 min.
60 min.
80 min.
30 min.
60 min.
80 min.
90 min.
120 min.
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO RECORDING
EN
20
●
Macro shooting (as close as approx. 5 cm to the
subject) is possible when the Power Zoom Lever is
set all the way to “W”. Also see “TELE MACRO” in
MANUAL Menu on page 39.
NOTES:
● The image will not appear simultaneously on the
LCD monitor and the viewfinder. When the
viewfinder is pulled out while the LCD monitor is
opened, you can select which one to use. Set
“PRIORITY” to the desired mode in SYSTEM
Menu. (੬ pg. 37, 40)
● When shooting a subject close to the lens, zoom
out first. If zoomed-in in the auto focus mode, the
camcorder may automatically zoom out
depending on the distance between the
camcorder and the subject. This will not occur
when “TELE MACRO” is set to “ON”. (੬ pg. 39)
● Coloured bright spots may appear all over the
LCD monitor or the viewfinder. However, this is not
a malfunction. (੬ pg. 58)
Journalistic Shooting
Zooming
In some situations,
different shooting
angles may provide
more dramatic results.
Hold the camcorder in
the desired position
and tilt the LCD
monitor in the most
convenient direction. It
can rotate 270° (90°
downward, 180°
Produces the zoom in/out effect, or an
instantaneous change in image magnification.
Zoom In
Slide the Power Zoom Lever towards “T”.
Zoom Out
Slide the Power Zoom Lever towards “W”.
● The further you slide the Power Zoom Lever, the
quicker the zoom action.
Zoom in (T: Telephoto)
upward).
1
x
W
T
10
x
W
T
20
xW
T
Self Recording
40
xW
T
Open the LCD
monitor and tilt it
upward to 180° so
that it faces forward,
Zoom out (W: Wide angle)
Self
point the lens toward
Recording
yourself and start
recording.
10
x
W
T
Digital zoom zone
15X (optical) zoom zone
Approximate zoom ratio
NOTES:
● Focusing may become unstable during Zooming.
In this case, set the zoom while in Record-
Standby, lock the focus by using the manual focus
(੬ pg. 45), then zoom in or out in Record mode.
● Zooming is possible to a maximum of 700X, or it
can be switched to 15X magnification using the
optical zoom. (੬ pg. 38)
● Zoom magnification of over 15X is done through
Digital image processing, and is therefore called
Digital Zoom.
● During Digital zoom, the quality of image may
suffer.
● Digital zoom cannot be used when the VIDEO/
MEMORY Switch is set to “MEMORY”.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO RECORDING
EN
21
Time Code
Quick Review
During recording, a time code is recorded on the Enables to check the end of the last recording.
tape. This code is to confirm the location of the
recorded scene on the tape during playback.
Display
1) Press Q.REVIEW during the Recording-
Standby mode.
2) Tape is rewound for about several seconds
the Recording-Standby mode for the next shot.
● Distortion may occur at start of playback. This is
normal.
Minutes
Seconds
Frames*
(25 frames = 1 second)
12 : 34 : 24
Recording From The Middle Of A Tape
1) Play back a tape or use Blank Search
(੬ pg. 22) to find the spot at which you want to
start recording, then engage the Still Playback
mode. (੬ pg. 22)
2) Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch, then start recording.
* Frames are not displayed during recording.
If recording starts from a blank portion, the time
code begins counting from “00:00:00”
(minute:second:frame). If recording starts from
the end of a previously recorded scene, the time
code continues from the last time code number.
If during recording a blank portion is left partway
through the tape, the time code is interrupted.
When recording is resumed, the time code starts
counting up again from “00:00:00”. This means
the camcorder may record the same time codes
as those existing in a previously recorded scene.
To prevent this, perform Recording From The
Middle Of A Tape (See the right column.) in the
following cases;
● When shooting again after playing back a
recorded tape.
● When power shuts off during shooting.
● When a tape is removed and re-inserted during
shooting.
● When shooting using a partially recorded tape.
● When shooting on a blank portion located partway
through the tape.
● When shooting again after shooting a scene then
opening/closing the cassette holder cover.
NOTES:
● The time code cannot be reset.
● During fast-forwarding and rewinding, the time
code indication does not move smoothly.
● The time code is displayed only when “TIME
CODE” is set to “ON”. (੬ pg. 40)
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO PLAYBACK
EN
22
Shuttle Search
Allows high-speed search in either direction
during video playback.
1) During playback, press 5 for forward
search, or 3 for reverse search.
2) To resume normal playback, press 4/9.
search continues as long as you hold the button.
Once you release the button, normal playback
resumes.
Normal Playback
MENU
Power Switch
VIDEO/
4/9/
MEMORY
VOL. +/–
Lock Button
● A slight mosaic effect appears on the display
during Shuttle Search. This is not a malfunction.
ATTENTION:
During Shuttle Search, parts
of the picture may not be
clearly visible, particularly on
the left side of the screen.
3
5 SET
8/
Speaker
1 Load a cassette. (੬ pg. 17)
2 Set the VIDEO/MEMORY Switch to “VIDEO”.
3 Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
Blank Search
Helps you find where you should start recording
in the middle of a tape to avoid time code
interruption. (੬ pg. 21)
4 To start playback, press 4/9.
5 To stop playback, press 8.
● During Stop mode, press 3 to rewind, or 5
to fast-forward the tape.
1 Load a cassette. (੬ pg. 17)
To control the speaker volume
Slide the Power Zoom Lever (VOL. +/–) towards
2 Set the VIDEO/MEMORY Switch to “VIDEO”.
“+” to turn up the volume, or towards “–” to turn 3 Set the Power Switch to “PLAY” while
down the volume.
pressing down the Lock Button located on the
switch.
NOTES:
4 Press MENU. The Menu Screen appears.
● The playback picture can be viewed in the LCD
monitor, viewfinder or on a connected TV.
(੬ pg. 23)
5 Press MENU to select “t”. The VIDEO
Menu appears.
● If Stop mode continues for 5 minutes when power
is supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power
Switch to “OFF”, then to “PLAY”.
● When a cable is connected to the AV connector,
the sound is not heard from the speaker.
6 Press or to select “BLANK SRCH”, and
press SET. The Sub Menu appears.
7 Press or to select “EXECUTE”, and press
SET.
● The “BLANK SEARCH” indication appears and
the camcorder automatically starts reverse or
forward search, then stops at the spot which is
about 3 seconds of tape before the beginning of
the detected blank portion.
Still Playback
Pauses during video playback.
1) Press 4/9 during playback.
2) To resume normal playback, press 4/9
again.
● To cancel Blank Search midway, press 8.
● If still playback continues for more than about
3 minutes, the camcorder’s Stop mode is
automatically engaged.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO PLAYBACK
EN
23
A Black to S-VIDEO IN (Connect when your TV/
VCR has S-VIDEO IN and A/V input
connectors. In this case, it is not necessary to
connect the yellow video cable.)
B Yellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors.)
C Red to AUDIO R IN**
NOTES:
● Before starting Blank Search, if the current
position is at a blank portion, the camcorder
searches in the reverse direction. If the current
position is at a recorded portion, the camcorder
searches in the forward direction.
● If the beginning or end of the tape is reached
during Blank Search, the camcorder stops
automatically.
● A blank portion which is shorter than 5 seconds of
tape may not be detected.
● The detected blank portion may be located
between recorded scenes. Before you start
recording, make sure there is no recorded scene
after the blank portion.
D White to AUDIO L IN**
*
If your VCR has a SCART connector, use the
provided cable adapter.
** Not required for watching still images only.
NOTES:
● Set the video out select switch of the cable
adapter as required:
Y/C: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-Video cable.
CVBS: When connecting to a TV or VCR which
does not accept Y/C signals and uses an audio/
video cable.
Connections To A TV Or VCR
Open the cover.
● The S-Video cable is optional. Be sure to use
the YTU94146A S-Video cable. Consult the
JVC Service Center described on the sheet
included in the package for details on its
availability. Make sure to connect the end with
a core filter to the camcorder. The core filter
reduces interference.
To S connector
To AV connector
1 Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as
shown in the illustration.
S cable
(optional)
AV cable
(provided)
If using a VCR, go to step 3.
If not, go to step 4.
referring to your VCR’s instruction manual.
1
2
3
4
4 Turn on the camcorder, the VCR and the TV.
5 Set the VCR to its AUX input mode, and set
the TV to its VIDEO mode.
“Y/C”/“CVBS”
Video Out Select
Switch
Cable
Adapter*
6 Start playback on the camcorder. (੬ pg. 22)
To choose whether or not the following
displays appear on the connected TV
● Date/time
To TV or VCR
TV
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(੬ pg. 37, 42)
Or, press DISPLAY on the remote control to turn
on/off the date indication.
● Time code
VCR
Set “TIME CODE” to “ON” or “OFF”.
(੬ pg. 37, 42)
● Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
(੬ pg. 37, 42)
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO PLAYBACK
EN
24
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(੬ pg. 15)
● To monitor the picture and sound from the
camcorder without inserting a tape or memory
card, set the camcorder’s Power Switch to “A” or
“M”, then set your TV to the appropriate input
mode.
● Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO PLAYBACK
EN
25
Buttons And Functions
Playback Using The Remote
Control
The Full-Function Remote Control Unit can
operate this camcorder from a distance as well
as the basic operations (Playback, Stop, Pause,
Fast-Forward and Rewind) of your VCR. It also
makes additional playback functions possible.
(੬ pg. 26)
Installing The Battery
The remote control uses
one lithium battery
(CR2025).
2
A Infrared beam transmitting window
● Transmits the beam signal.
1
1 Pull out the battery
The following buttons are available only when
the camcorder’s Power Switch is set to “PLAY”.
B PAUSE Button
● Pauses the tape (੬ pg. 26)
Up Button (੬ pg. 27)
C SLOW Rewind Button (੬ pg. 26)
3
holder by pushing the lock
tab.
1
Lock tab
2 Insert the battery in the
holder, and be sure to
have the “+” mark visible.
D REW Button
● Rewind/Reverse Shuttle Search on a tape
(੬ pg. 22)
● Displays previous file in a memory card
(੬ pg. 29)
Left Button (੬ pg. 27)
E INSERT Button (੬ pg. 56)
F SHIFT Button (੬ pg. 27)
G DISPLAY Button (੬ pg. 23, 52)
H SLOW Forward Button (੬ pg. 26)
I PLAY Button
3 Slide the holder back in until you hear a click.
Beam Effective Area (indoor use)
When using the remote
control, be sure to point it
at the remote sensor.
The transmitted beam’s
approximate effective
distance for indoor use is
5 m.
Remote sensor
NOTE:
● Starts Playback of a tape (੬ pg. 22)
● Starts Auto Playback of images in a memory
card (੬ pg. 30)
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
J FF Button
● Forward/Forward Shuttle Search on a tape
(੬ pg. 22)
● Displays next file in a memory card (੬ pg. 29)
Right Button (੬ pg. 27)
K A. DUB Button (੬ pg. 55)
L STOP Button
● Stops the tape (੬ pg. 22)
● Stops Auto Playback (੬ pg. 30)
Down Button (੬ pg. 27)
M EFFECT Button (੬ pg. 27)
N EFFECT ON/OFF Button (੬ pg. 27)
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO PLAYBACK
EN
26
.
The following buttons are available when the
camcorder’s Power Switch is set to “A” or “M”.
o Zoom (T/W) Buttons
PAUSE or
(Up)
Zoom (T/W)
Zoom in/out (੬ pg. 20, 27)
(Also available with the Power Switch set to
“PLAY”)
SLOW (YI)
SLOW (IU)
PLAY
p START/STOP Button
(Right)
Functions the same as the Recording Start/
Stop Button on the camcorder.
q S.SHOT Button
STOP or
(Down)
(Left)
SHIFT
Functions the same as SNAPSHOT on the
camcorder.
(Also available with the Power Switch set to
“PLAY”)
Slow-Motion Playback
During normal video playback, press SLOW (YI
or IU) more than approx. 2 seconds.
● After approx. 10 minutes, normal playback
resumes.
● To pause Slow-Motion playback, press PAUSE
(9).
● To stop Slow-Motion playback, press PLAY (U).
NOTES:
● You can also engage Slow-Motion Playback from
Still Playback by pressing SLOW (YI or IU) more
than approx. 2 seconds.
● During Slow-Motion Playback, due to digital image
processing, the picture may take on a mosaic
effect.
● After SLOW (YI or IU) is pressed and held, the
still image may be displayed for a few seconds,
followed by a blue screen for a few seconds. This
is not a malfunction.
● During Slow-Motion Playback, there will be
disturbances in video and the picture may seem
unstable, especially with steady images. This is
not a malfunction.
Frame-By-Frame Playback
During normal or still playback, press SLOW
(IU) repeatedly for forward or SLOW (YI)
repeatedly for reverse. Each time SLOW (YI or
IU) is pressed, the frame is played back.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO PLAYBACK
EN
27
Playback Zoom
Playback Special Effects
Magnifies the recorded image up to 47X at any
Allows you to add creative effects to the video
time during video playback and D.S.C. playback. playback image.
1) Press PLAY (U) to start video
playback. Or perform normal
playback of images.
CLASSIC FILM: Gives recorded scenes a
strobe effect.
MONOTONE: Like classic black and white
films, your footage is shot in B/W. Used together
with the Cinema mode, it enhances the “classic
film” effect.
SEPIA: Recorded scenes have a brownish
tint like old photos. Combine this with the
Cinema mode for a classic look.
2) At the point you want to zoom
in, press the Zoom Button (T).
● To zoom out, press the Zoom
Button (W).
3) You can move the image on
the screen around to find a
particular portion of the picture.
While holding down SHIFT,
STROBE: Your recording looks like a
series of consecutive snapshots.
1) To start
EFFECT ON/OFF
playback,
press PLAY
press
(Left), (Right),
(Down).
EFFECT
(Up) and
(U).
2) Press
EFFECT. The
● To end zoom, press and hold W until magnification
returns to normal. Or, press STOP (8) and then
press PLAY (U) during video playback.
PLAYBACK EFFECT Select Menu appears.
3) Press EFFECT repeatedly to move the
highlight bar to the desired effect.
● The selected function is activated and after
2 seconds the menu disappears.
● To deactivate the selected effect, press EFFECT
ON/OFF. To reactivate the selected effect press
EFFECT ON/OFF again.
NOTES:
● Zoom can also be used during slow-motion and still
playback.
● Due to digital image processing, the quality of the
image may suffer.
● To change the selected effect, repeat from step 2
above.
Download from Www.Somanuals.com. All Manuals Search And Download.
D.S.C. RECORDING
EN
28
NOTE:
Basic Shooting (D.S.C. Snapshot)
If shooting is not performed for approx. 5 minutes
when the Power Switch is set to “A” or “M” and
power is supplied from the battery pack, the
camcorder shuts off automatically to save power. To
perform shooting again, push back and pull out the
monitor.
You can use your camcorder as a Digital Still
Camera for taking snapshots. Still images are
stored in the memory card.
NOTE:
Before continuing, perform the procedures listed
below:
Approximate Number of Storable Images
● The number increases or decreases depending
on the Picture Quality/Image Size, etc.
● Power (੬ pg. 13)
● Loading a Memory Card (੬ pg. 18)
VIDEO/
SNAPSHOT
MEMORY
SD Memory Card
Image Size/Picture Quality
8 MB 16 MB 32 MB 64 MB
Power Switch
640 x 480/FINE
47
160 295 625 1285
21 47 95 200
65 145 310 640
95 205 425
640 x 480/STANDARD
1024 x 768/FINE
1024 x 768/STANDARD
1152 x 864/FINE
13
45
8
29
95 205 425
19 41 80
60 125
Lock Button
1152 x 864/STANDARD
1600 x 1200/FINE
1 Remove the lens cap.
1600 x 1200/STANDARD 28
60 130 275
2 Open the LCD monitor fully. (੬ pg. 19)
MultiMediaCard
Image Size/Picture Quality
8 MB 16 MB 32 MB
“MEMORY”.
640 x 480/FINE
55
190
25
75
16
50
10
34
105
320
50
215
645
100
320
60
4 Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
640 x 480/STANDARD
1024 x 768/FINE
● To change the Image Size and/or Picture Quality,
1024 x 768/STANDARD
1152 x 864/FINE
160
32
5੬Ppregs.s37S,N4A1.PSHOT. The “O” indication
appears while the snapshot is being taken.
● To check how the image looks before recording it
in the memory card, press SNAPSHOT halfway
and hold. The “ ” indicator appears and stops
blinking when the captured image is focused. To
cancel the recording, release SNAPSHOT. To
record it in the memory card, press SNAPSHOT
fully.
1152 x 864/STANDARD
1600 x 1200/FINE
105
21
216
42
1600 x 1200/STANDARD
65
135
● Still images are recorded in the snapshot mode
with no frame.
● To delete unwanted still images, refer to “Deleting
Files” (੬ pg. 34).
● When you do not want to hear the shutter sound,
set “BEEP” to “OFF”. (੬ pg. 37, 39)
Download from Www.Somanuals.com. All Manuals Search And Download.
D.S.C. PLAYBACK
EN
29
Interval Shooting
During Interval Shooting mode, the camcorder
continues to take snapshots automatically with
an interval of your desired setting.
Images shot with the camcorder are
automatically numbered, then stored in
1 Set “INT.SHOT” to “ON”. (੬ pg. 37, 41)
● “INTERVAL” and “ ” appear.
view the stored images, one at a time, much like
flipping through a photo album.
2 Set “INT.TIME” to the desired shooting
MENU
SEL
interval. (੬ pg. 37, 41)
Power Switch
3 Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
4 Press SNAPSHOT.
● First shot is taken after 2 seconds.
● The “O” indicator appears while the snapshot
is being taken.
● The clock icon “ ” turns while waiting for the next
shot is being taken.
● The next shot is being taken automatically when
the shooting interval set in step 2 has passed.
Lock Button
VIDEO/
MEMORY
<
>
SET
1 Load a memory card. (੬ pg. 18)
5 Press SNAPSHOT to stop Interval Shooting.
2 Set the VIDEO/MEMORY Switch to
To cancel Interval Shooting mode
“MEMORY”.
Set “INT.SHOT” to “OFF” in step 1.
3 Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
● The type of file (IMAGE or E-MAIL CLIP) which
has been played back at the last time is displayed.
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(੬ pg. 15)
● To distinguish between still images taken in
Interval Shooting mode and other still images, it is
recommended that you reset the file names before
shooting. (੬ pg. 33)
4 If the video clip playback (E-MAIL CLIP,
੬ pg. 30) screen appears, press SEL. The
MEMORY SELECT screen appears.
● Interval Shooting will stop if the battery runs out of
power or the Memory Card becomes full.
● The function “Animation” in the provided software
“Digital Photo Navigator” can be used to create
movie files from the captured still images
5 Press or to select “IMAGE”, and press
SET. The image playback screen (IMAGE)
appears.
6 Press < to display the previous file. Press > to
®
(Windows only). To create movie files with the
display the next file.
Macintosh, it is recommended that you use the
function “Creating a Slideshow From Still Images”
in the commercial software “QuickTime Pro”.
NOTE:
Images shot and stored on the card with another
device with resolutions other than “640 x 480” and
“1024 x 768” will be displayed as thumbnails only.
These thumbnail images cannot be transferred to a
PC.
Playback Zoom
Available only with the remote control.
(੬ pg. 26)
Download from Www.Somanuals.com. All Manuals Search And Download.
D.S.C. PLAYBACK
EN
30
Auto Playback Of Images
You can view several different files stored in the
memory card at a time. This browsing capability
makes it easy to locate a particular file you want.
You can run through all the images stored in
memory card automatically.
1 Perform steps 1 – 3 in “Normal Playback Of
1 For Index Playback of image files, perform
steps 1 – 5 in “Normal Playback Of Images”
(੬ pg. 29).
For Index Playback of video clip files, perform
steps 1 – 3 in “Playback Of Video Clips” on the
left column.
Images”.
2 Press 4/9 to start Auto Playback.
● If you press < during Auto Playback, files are
displayed in descending order.
● If you press > during Auto Playback, files are
displayed in ascending order.
2 Press INDEX. The
Selected file
3 To end Auto Playback, press 8.
Index Screen of the
2
5
8
3
1
4
7
selected type of file
appears.
Playback Of Video Clips
You can view video clips (੬ pg. 32) stored in the
6
9
3 Press > or < to move
the frame to the desired
file.
memory card.
● Press < to display the
previous page. Press >
to display the next page.
1 Perform steps 1 – 3 in “Normal Playback Of
Index number
Images”.
2 If the image playback (IMAGE) screen
appears, press SEL. The MEMORY SELECT
screen appears.
4 Press SET. The selected file is displayed.
3 Press or to select
Viewing File Information
You can get the relevant file information by
pressing the INFO Button during normal
playback or Index Playback.
E-MAIL CLIP
“E-MAIL CLIP”, and press
SET. The video clip
playback screen (E-MAIL
CLIP) appears.
4 Press < to select the
previous file. Press > to
select the next file.
FOLDER: Folder name
(੬ pg. 33)
FILE: File name
(੬ pg. 33)
DATE: Date the file was
made
FOLDER
F I LE
: 1 0 0 JVCGR
: DVC0 0 0 1 0
: 2 7 . 1 0. 0 4
: 1 0 2 4X7 6 8
DATE
S I ZE
QUAL I TY : F I NE
PROTECT : OFF
5 To start playback, press 4/9.
6 To stop playback, press 8.
SIZE: Image size
NOTES:
QUALITY: Picture quality (IMAGE only)
TIME: Playback time (E-MAIL CLIP only)
PROTECT: When set to “ON”, the file is
protected from accidental erasure. (੬ pg. 33)
● The video clip files stored with this camcorder are
compatible with MPEG4. Some MPEG4 files
stored with other devices cannot be played back
with this camcorder.
● You can also view video clips on your PC by using ● Press the INFO Button again to close the
®
Windows Media Player version 6.4 or later. Refer
to the instructions of PC and software.
Information Screen.
NOTE:
With images shot with other devices or processed
on a PC, “QUALITY: – – –” will be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
D.S.C. PLAYBACK
EN
31
Removing On-Screen Display
1 Perform steps 1 – 3 in “Normal Playback Of
Images” (੬ pg. 29).
2 Press MENU. The Menu Screen appears.
3 Press or to select “DISPLAY”, and press
SET. The Sub Menu appears.
4 Press or to select “OFF”, and press SET.
The operation mode indicator, folder/file number
and battery remaining power indicator
disappear.
● To display the indicators again, select “ON”.
Operation mode indicator
Folder/file number
100-0013
MENU
50m
D I SPLAY OFF
ON
Battery remaining power indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL FEATURES FOR D.S.C.
EN
32
To make video clips from recorded video
footage
E-Mail Clip Recording
You can make video clips from real-time camera
image or recorded video footage and store them
in a memory card as files which can be
conveniently sent via E-Mail.
1 Load a cassette. (੬ pg. 17)
2 Load a memory card. (੬ pg. 18)
3 Set the VIDEO/MEMORY Switch to “VIDEO”.
4 Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
To make video clips from real-time camera
image
1 Load a memory card. (੬ pg. 18)
5 Press 4/9 to start video playback.
2 Set the VIDEO/MEMORY Switch to
6 Press E-MAIL to engage the E-Mail Clip
“MEMORY”.
Record-Standby mode.
● “E-CLIP” appears.
● To cancel E-Mail Clip Recording, press E-MAIL
again or press 8 to stop video playback.
3 Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
7 At the point you want to start dubbing, press
the Recording Start/Stop Button to start E-Mail
Clip Recording.
4 Press E-MAIL to
Remaining time
engage the E-Mail Clip
11
660
E-
CLIP
0hh5mm
00 : 00
STANDBY
Record-Standby mode.
● “E-CLIP” appears.
8 Press the Recording Start/Stop Button to
stop E-Mail Clip Recording.
5 Press the Recording
Start/Stop Button to start
recording.
● “COMPLETED” is displayed, then the camcorder
re-enters the E-Mail Clip Record-Standby mode.
9 Press E-MAIL to end E-Mail Clip Recording.
6 Press the Recording
NOTES:
Start/Stop Button to stop recording.
● Approximate maximum recording time per video
clip is 3 minutes.
● “COMPLETED” is displayed, then the camcorder
re-enters the E-Mail Clip Record-Standby mode.
● The video clip files stored with this camcorder are
compatible with MPEG4. Some MPEG4 files
stored with other devices cannot be played back
with this camcorder.
7 Press E-MAIL to end E-Mail Clip Recording.
Approximate recording time
SD Memory Card
Image Size
8 MB
16 MB 32 MB 64 MB
160 x 120
7 min. 15 min. 33 min. 68 min.
MultiMediaCard
Image Size
160 x 120
8 MB
16 MB
32 MB
8 min.
17 min.
34 min.
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL FEATURES FOR D.S.C.
EN
33
NOTE:
Dubbing Still Images Recorded On
A Tape To A Memory Card
If the file name reaches DVC09999, a new folder
(such as “101JVCGR”) will be made and the file
name will start again from DVC00001.
Still images can be dubbed from a tape to a
memory card.
Protecting Files
The Protect mode helps prevent the accidental
1 Load a cassette. (੬ pg. 17)
2 Load a memory card. (੬ pg. 18)
erasure of files.
3 Set “SNAP/SLOW” to the desired mode.
1 To protect the file...
...for images, display its playback screen.
(੬ pg. 29)
...for video clips, display its playback screen.
(੬ pg. 30)
(except “SLOW”, ੬ pg. 37, 38)
4 Set the VIDEO/MEMORY Switch to “VIDEO”.
5 Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
2 Press MENU. The Menu Screen appears.
3 Press or to select “PROTECT”, and press
6 Set “
COPY” to “ON”.
SET. The Sub Menu appears.
(੬ pg. 37, 42)
To protect the currently displayed file
7 Press 4/9 to start playback.
4 Press or to select
8 At the point you want to dub, press 4/9
“CURRENT”, and press
MENU
again to engage Still Playback.
PROTECT
CURRENT
PROT . ALL
CANC . ALL
SET. The PROTECT
screen appears.
9 To dub the image, press SNAPSHOT.
● The “
” indication appears during dubbing.
RETURN
5 Press < or > to select
NOTES:
the desired file.
● To use Playback Special effects with a video
image you wish to dub, perform up to step 9 using
the remote control. (੬ pg. 27)
6 Press or to select
“EXECUTE”, and press
SET.
PROTECT
● Images are dubbed in 640 x 480 pixels.
● To cancel protection,
select “RETURN”.
● Repeat steps 5 and 6 for
all files you want to
protect.
PROTECTED
RETURN
Resetting The File Name
By resetting the file name, a new folder will be
made. The new files you are going to make will
be stored in the new folder. It is convenient to
separate the new files from previously made
files.
To protect all files stored in the memory card
4 Press or to select “PROT.ALL”, and press
SET. The PROTECT screen appears.
1 To reset the file name...
...for images, display its playback screen.
(੬ pg. 29)
...for video clips, display its playback screen.
(੬ pg. 30)
5 Press or to select “EXECUTE”, and press
SET.
● To cancel protection, select “RETURN”.
NOTES:
● If the “
” mark appears, the currently displayed
2 Press MENU. The Menu Screen appears.
file is protected.
3 Press or to select “NO. RESET”, and
● When the memory card is initialised or corrupted,
even protected files are deleted. If you do not want
to lose important files, transfer them to a PC and
save them.
press SET. The NO. RESET screen appears.
4 Press or to select “EXECUTE”, and press
SET. The new folder (such as “101JVCGR”) will
be made and the file name of the next shot
starts from DVC00001.
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL FEATURES FOR D.S.C.
EN
34
To Remove Protection
Before doing the following, perform steps 1 – 3
in “Protecting Files”.
Deleting Files
Previously stored files can be deleted either one
at a time or all at once.
To remove protection from the currently
displayed file
1 To delete the file...
...for images, display its playback screen.
(੬ pg. 29)
4 Press or to select “CURRENT”, and press
SET. The PROTECT screen appears.
...for video clips, display its playback screen.
(੬ pg. 30)
5 Press < or > to select the desired file.
2 Press MENU. The Menu Screen appears.
6 Press or to select “EXECUTE”, and press
SET.
3 Press or to select “DELETE”, and press
● To cancel selection, select “RETURN”.
● Repeat steps 5 and 6 for all files you want to
remove protection.
SET. The Sub Menu appears.
To delete the currently displayed file
4 Press or to select
To remove protection from all files stored in
the memory card
“CURRENT”, and press
MENU
SET. The DELETE screen
appears.
DELETE
CURRENT
ALL
4 Press or to select “CANC.ALL”, and press
SET. The PROTECT screen appears.
RETURN
5 Press < or > to select
5 Press or to select “EXECUTE”, and press
SET.
● To cancel selection, select “RETURN”.
the desired file.
6 Press or to select
“EXECUTE”, and press
SET.
DELETE
● To cancel deletion, select
“RETURN”.
● Repeat steps 5 and 6 for
all files you want to delete.
DELETE?
EXECUTE
RETURN
NOTE:
If the “
” mark appears, the selected file is
protected and cannot be deleted.
4 Press or to select “ALL”, and press SET.
The DELETE screen appears.
5 Press or to select “EXECUTE”, and press
SET.
● To cancel deletion, select “RETURN”.
NOTES:
● Protected files (੬ pg. 33) cannot be deleted. To
delete them, remove protection first.
● Once files are deleted, they cannot be restored.
Check files before deleting.
CAUTION:
Do not remove the memory card or perform any
other operation (such as turning off the camcorder)
during deletion. Also, be sure to use the provided
AC Adapter, as the memory card may be corrupted
if the battery becomes exhausted during deletion. If
the memory card becomes corrupted, initialise it.
(੬ pg. 36)
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL FEATURES FOR D.S.C.
EN
35
To Print By Selecting Still Images And
Number Of Prints
Setting Print Information (DPOF
Setting)
This camcorder is compatible with the DPOF
(Digital Print Order Format) standard in order to
support future systems such as automatic
printing. You can select one of the 2 print
information settings for images stored in the
memory card: “To Print All Still Images (One
Print For Each)” or “To Print By Selecting Still
Images And Number Of Prints”.
Images (One Print For Each)”.
2 Press or to select
DPOF
“CURRENT”, and press
SET. The DPOF screen
appears.
SHEETS
0 0
RETURN
3 Press or to select
the desired file.
NOTES:
(00), and press SET.
● If you load a memory card already set as shown
below in a printer compatible with DPOF, it will
make prints of the selected still images
automatically.
5 Select the number of
DPOF
prints by pressing to
increase the number, or
● To print images recorded on a tape, first dub them
to decrease the number,
to a memory card. (੬ pg. 33)
SHEETS
and press SET.
0 5
To Print All Still Images (One Print For Each)
● Repeat steps 3 through 5
for the desired number of
prints.
1 Perform steps 1 – 3 in “Normal Playback Of
● The number of prints can be set up to 15.
● To correct the number of prints, select the image
again and change the number.
Images” (੬ pg. 29).
2 Press MENU. The Menu Screen appears.
3 Press or to select
6 Press or to select
DPOF
“DPOF”, and press SET.
MENU
“RETURN”, and press
The Sub Menu appears.
DPOF
CURRENT
ALL
RESET
SET. The “SAVE?”
appears.
● If you did not change any
1
SAVE?
4 Press or to select
“ALL 1”, and press SET.
The DPOF screen
appears.
RETURN
EXECUTE
CANCEL
settings in step 3 through
5, the Menu Screen
reappears.
5 Press or to select
“EXECUTE”, and press
SET. The normal playback
screen appears.
DPOF
7 Press or to select “EXECUTE” to save the
setting you have just made, and press SET.
● To cancel selection, select “CANCEL”.
ALL1?
● To cancel selection, select
“RETURN”.
EXECUTE
RETURN
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL FEATURES FOR D.S.C.
EN
36
To Reset The Number Of Prints
Initialising A Memory Card
You can initialise a memory card any time.
After initialising, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1 Perform steps 1 – 3 in “To Print All Still
Images (One Print For Each)”.
2 Press or to select “RESET”, and press
SET. The DPOF screen appears.
3 Press or to select “EXECUTE”, and press
SET. The normal playback screen appears.
● To cancel selection, select “RETURN”.
● The number of prints is reset to 0 for all still
images.
1 Set the VIDEO/MEMORY Switch to
“MEMORY”.
2 Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
CAUTION:
3 Press MENU. The Menu Screen appears.
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
FORMAT
4 Press or to select
“FORMAT”, and press
ERASE ALL
SET. The FORMAT
EX I ST I NG DATA?
screen appears.
EXECUTE
RETURN
5 Press or to select
“EXECUTE”, and press
SET. The memory card is
initialised.
● When initialisation is finished, “NO IMAGES
STORED” or “NO E-MAIL CLIP STORED”
appears.
● To cancel initialisation, select “RETURN”.
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialisation.
Also, be sure to use the provided AC Adapter, as
the memory card may be corrupted if the battery
becomes exhausted during initialisation. If the
memory card becomes corrupted, initialise it.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENUS FOR DETAILED ADJUSTMENT
EN
37
Menus without Sub Menus
Changing The Menu Settings
This camcorder is equipped with an easy-to-use,
on-screen menu system that simplifies many of
the more detailed camcorder settings.
(੬ pg. 38 – 42)
v WIPE/FADER
(੬ pg. 48)
Selected menu icon
blinks.
r PROGRAM AE
(੬ pg. 48)
p EXPOSURE
(੬ pg. 45)
u W. BALANCE
(੬ pg. 47)
Selected
PROGRAM AE
VIDEO/
MEMORY MENU
SPORTS
SPOTLIGHT
TWILIGHT
SEPIA
Power Switch
MONOTONE
CLASSIC FILM
the desired parameter.
● Example: r PROGRAM
AE Menu
STROBE
2) Press SET. Selection is complete. The Menu
Screen returns.
● Repeat the procedure if you wish to set other
function menus.
3) Press SET. The Menu Screen closes.
Lock Button
SET
1 For Video and D.S.C. Recording Menus:
● Set the VIDEO/MEMORY Switch to “VIDEO” or
“MEMORY”.
● Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
Menus with Sub Menus
m CAMERA (੬ pg. 38)
q MANUAL
(੬ pg. 39)
s SYSTEM (੬ pg. 39)
Selected menu icon
blinks.
For Video Playback Menus:
Selected function
● Set the VIDEO/MEMORY Switch to “VIDEO”.
● Set the Power Switch to “PLAY” while pressing
down the Lock Button located on the switch.
● For D.S.C. Playback Menus, refer to “D.S.C.
PLAYBACK” (੬ pg. 29).
n
੬
CAMERA DISPLAY
pg. 40)
CAMERA
REC MODE
–
(
SOUND MODE– 1 2B I T
ZOOM
–
–
–
6 0 x
o DSC (੬ pg. 41)
t VIDEO (੬ pg. 41)
n VIDEO DISPLAY
(੬ pg. 42)
1) Press or to select
the desired function,
and press SET. The
Sub Menu appears.
● Example: m CAMERA
Menu
2) Press or to select
the desired parameter.
3) Press SET. Selection
is complete.
● Repeat the procedure if
you wish to set other
function menus.
SNAP/SLOW
GA I N UP
FULL
AGC
NAV I GAT I ON– MANUAL
2 Open the LCD monitor fully. (੬ pg. 19)
3 Press MENU. The Menu Screen appears.
RETURN
Sub Menu
CAMERA
4 Press or to select the desired function,
and press SET. The selected function menu
appears.
REC MODE
–
Screen for Video and Screen for Video
D.S.C. Recording Menu Playback Menu
WI PE / FADER
OFF
V I DEO
SOUND MODE– STEREO
FADER–WH I TE
FADER–BLACK
FADER–B .W
WI PE–CORNER
WI PE–WI NDOW
WI PE–SL I DE
WI PE–DOOR
WI PE–SCROLL
WI PE–SHUTTER
NARRAT I ON
REC MODE
–
–
OFF
COPY– OFF
CAMERA
NAV I . DEL .
BLANK SRCH
REC MODE
–
SOUND MODE– 1 2B I T
ZOOM
–
–
–
6 0 x
SNAP/SLOW
GA I N UP
FULL
AGC
RETURN
NAV I GAT I ON– MANUAL
4) Press SET. The
Menu Screen returns.
● Repeat the procedure if
5 Setting procedure hereafter depends on the
selected function.
RETURN
you wish to set other function menus.
5) Press SET. The Menu Screen closes.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENUS FOR DETAILED ADJUSTMENT
EN
38
Recording Menus
SNAP/SLOW
[FULL]: Snapshot mode with no frame
NEGA: Nega mode
PIN-UP: Pin-Up mode
CAMERA
The “m CAMERA” settings are effective when
the Power Switch is set to both “A” and “M”.
However, the menu settings can be changed
only when the Power Switch is set to “M”.
[ ] = Factory-preset
FRAME: Snapshot mode with frame
SLOW: Live Slow mode
REC MODE
[FULL]
NEGA
PIN-UP
FRAME
For details on the procedure, refer to “Live Slow”
(੬ pg. 43) and “Snapshot (For Video
Recording)” (੬ pg. 44).
[SP]: To record in the SP (Standard Play) mode
LP: Long Play—more economical, providing 1.5
times the recording time.
NOTES:
GAIN UP
● Audio Dubbing (੬ pg. 55) and Insert Editing
(੬ pg. 56) are possible on tapes recorded in the
SP mode.
OFF: Allows you to shoot dark scenes with no
picture brightness adjustment.
[AGC]: The overall appearance may be grainy,
but the image is bright.
AUTO
adjusted. Shooting a subject in low or poor
lighting at slow shutter speed provides a brighter
image than in the AGC mode, but the subject’s
movements are not smooth or natural. The
overall appearance may be grainy. While the
shutter speed is being automatically adjusted,
● If the recording mode is switched, the playback
picture will be blurred at the switching point.
● It is recommended that tapes recorded in the LP
mode on this camcorder be played back on this
camcorder.
● During playback of a tape recorded on another
camcorder, blocks of noise may appear or there
may be momentary pauses in the sound.
: The shutter speed is automatically
SOUND MODE
“
” is displayed.
[12BIT]: Enables video recording of stereo
sound on four separate channels, and is
recommended for use when performing Audio
Dubbing. (Equivalent to the 32 kHz mode of
previous models)
NAVIGATION
[MANUAL]: Enables thumbnail images to be
made manually. (੬ pg. 50)
5SEC / 15SEC / 30SEC / 60SEC:
16BIT: Enables video recording of stereo sound
on two separate channels. (Equivalent to the
48 kHz mode of previous models)
The captured image is stored in the memory
card as a thumbnail image when the recording
time is over the navigation time.
For example, “5SEC” is suitable to record short
scenes with the thumbnail images. (੬ pg. 49)
However, the stored thumbnail images may take
up a lot of memory. In this case, using the
memory card with large capacity is
recommended.
ZOOM
15X: When set to “15X” while using digital zoom,
the zoom magnification will reset to 15X since
digital zoom will be disengaged.
[60X]*: Allows you to use the Digital Zoom. By
digitally processing and magnifying images,
zooming is possible from 15X (the optical zoom
limit), to a maximum of 60X digital magnification.
700X*: Allows you to use the Digital Zoom. By
digitally processing and magnifying images,
zooming is possible from 15X (the optical zoom
limit), to a maximum of 700X digital
OFF: Disables the function.
● The “
” indicator appears when
“NAVIGATION” is set to other than “MANUAL”
and “OFF”.
magnification.
* Available only when the VIDEO/MEMORY Switch
is set to “VIDEO”.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENUS FOR DETAILED ADJUSTMENT
EN
39
SQUEEZE* : For playback on TVs with an
aspect ratio of 16:9. Naturally expands the
image to fit the screen without distortion. The
MANUAL
The “q MANUAL” settings are effective only
when the Power Switch is set to “M”.
[ ] = Factory-preset
refer to your wide-screen TV’s instruction
manual. During playback/recording on 4:3 TVs/
LCD monitor/viewfinder, the image is elongated
vertically.
DIS
OFF: Disables the function.
[ON
]: To compensate for unstable images
D.WIDE* : The
indicator appears. The
caused by camera-shake, particularly at high
magnification.
zoom range is extended beyond the maximum
optical zoom wide angle range. This mode’s
wide angle setting is equivalent to using a 0.7X
wide conversion lens. Zooming is possible from
0.7X to 10X. This mode is suitable for shooting
in a small room.
NOTES:
● Accurate stabilisation may not be possible if hand
shake is excessive, or depending on the shooting
condition.
* Available only when the VIDEO/MEMORY Switch
is set to “VIDEO”.
● The “
Stabiliser cannot be used.
” indicator blinks or goes out if the
● Switch off this mode when recording with the
camcorder on a tripod.
WIND CUT
[OFF]: Disengages the function.
5S
ON
: Helps cut down on noise created by
[OFF]: Disables 5-Second Recording.
5S: Enables 5-Second Recording. (੬ pg. 43)
Anim.: Allows you to record a few frames only.
By using an inanimate object and changing its
position between shots, you can record the
subject as though it is moving.
wind. The “
the sound will change. This is normal.
SYSTEM
The “s SYSTEM” functions which are set when
the Power Switch is set to “M” are also applied
when the Power Switch is set to “PLAY”.
[ ] = Factory-preset
TELE MACRO
[OFF]: Disables the function.
ON: When the distance to the subject is less
than 1 m, set “TELE MACRO” to “ON”. You can
shoot a subject as large as possible at a
distance of approx. 50 cm.
BEEP
OFF: Even though not heard while shooting,
shutter sound is recorded on the tape.
BEEP: The beep sounds when the power is
turned on or off, and at the beginning and end of
recording. It also activates the shutter sound
effect. (੬ pg. 28, 44)
NOTE:
Depending on the zoom position, the lens may go out
of focus.
[MELODY]: Instead of a beep, a melody sounds
when any operation is performed. It also
activates the shutter sound effect.
WIDE MODE
[OFF]: Records with no change in the screen
ratio. For playback on a TV with a normal screen
ratio.
(੬ pg. 28, 44)
CINEMA* : Inserts black bands at the top and
bottom of the screen. The
indicator appears.
During playback on wide-screen TVs, the black
bands at the top and bottom of the screen are
cut and the screen ratio becomes 16:9. When
using this mode, refer to your wide-screen TV’s
instruction manual. During playback/recording
on 4:3 TVs/LCD monitor/viewfinder, black bands
are inserted at the top and bottom of the screen
and the image appears like a letter boxed 16:9
movie.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENUS FOR DETAILED ADJUSTMENT
EN
40
REMOTE
BRIGHT
OFF: Disables the remote control operations.
[ON]: Enables the remote control operations.
੬ pg. 17, “Brightness Adjustment Of The
Display”
DEMO MODE
ON SCREEN
OFF: Automatic demonstration will not take
place.
[ON]: Demonstrates certain functions such as
Program AE with special effects, etc., and can
LCD: Keeps the camcorder’s display (except the
date, time and time code) from appearing on the
connected TV screen.
[LCD/TV]: Makes the camcorder’s display
be used to confirm how these functions operate. appear on screen when the camcorder is
Demonstration starts in the following cases:
● When the Menu Screen is closed after “DEMO
MODE” is turned “ON”.
connected to a TV.
DATE/TIME
● With “DEMO MODE” set to “ON”, if there is no
operation for about 3 minutes after the Power
Switch is set to “A” or “M”.
● Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.
OFF: The date/time does not appear.
[AUTO]: Displays the date/time for approx. 5
seconds when the Power Switch is set from
“OFF” to “A” or “M”.
ON: The date/time is always displayed.
● The date indication can also be turned on/off by
pressing the DISPLAY Button on the remote
control. (੬ pg. 23, 52)
NOTES:
TIME CODE
● If a cassette is in the camcorder, the
demonstration cannot be turned on.
● “DEMO MODE” remains “ON” even if the
camcorder power is turned off.
● If “DEMO MODE” remains “ON”, some functions
will not be available. After viewing demo, set to
“OFF”.
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder
not displayed during recording. (੬ pg. 21)
LANGUAGE
[ENGLISH] / FRANÇAIS / DEUTSCH /
ESPAÑOL / ITALIANO / NEDERLANDS /
PRIORITY
[LCD]: The image is displayed on the LCD
monitor when the viewfinder is pulled out while
the LCD monitor is opened.
FINDER: The image is displayed in the
viewfinder when the viewfinder is pulled out
while the LCD monitor is opened.
PORTUGUÊS / РУССКИЙ /
/
/
/
The language setting can be changed.
(੬ pg. 16)
AUDIO LEV.
OFF: Auxiliary microphone level indicator does
not appear.
[ON]: Displays auxiliary microphone level
indicator when optional microphone is
connected. (੬ pg. 8)
CAM RESET
EXECUTE: Resets all settings to the factory-
preset.
[RETURN]: Does not reset all settings to the
factory-preset.
CLOCK ADJ.
CAMERA DISPLAY
੬ pg. 16, “Date/Time Settings”
● The “n” (CAMERA DISPLAY) settings are
effective even when the Power Switch is set to
“A”. However, the menu settings can be changed
only when the Power Switch is set to “M”.
● The “n” (CAMERA DISPLAY) settings except
“BRIGHT” and “AUDIO LEV.” are effective only for
shooting.
[ ] = Factory-preset
Download from Www.Somanuals.com. All Manuals Search And Download.
MENUS FOR DETAILED ADJUSTMENT
EN
41
DSC
INT.TIME
30MIN
/
60MIN
/
[1MIN]
/
2MIN
/
5MIN
/
10MIN
/
[ ] = Factory-preset
QUALITY
Allows you to select the shooting interval for
interval shooting. (੬ pg. 29)
[FINE] / STANDARD
The Picture Quality mode can be selected to
best match your needs. Two Picture Quality
Playback Menus
modes are available: FINE (
) and
STANDARD (
) (in order of quality).
VIDEO
[ ] = Factory-preset
NOTE:
The number of storable images depends on the
selected picture quality as well as the composition
of the subjects in the images and the type of
memory card being used. (੬ pg. 28)
SOUND MODE and NARRATION
During tape playback, the camcorder detects the
sound mode in which the recording was made,
and plays the sound back. Select the type of
sound to accompany your playback picture.
According to the menu access explanation on
page 37, select “SOUND MODE” or
IMAGE SIZE
640 x 480 / 1024 x 768 / [1152 x 864] /
1600 x 1200
The Image Size mode can be selected to best
match your needs. (੬ pg. 28)
“NARRATION” from the Menu Screen and set it
to the desired parameter.
NOTE:
SOUND MODE
The setting can be changed only when the VIDEO/
MEMORY Switch is set to “MEMORY”.
[STEREO
]: Sound is output on both “L” and
“R” channels in stereo.
SOUND L : Sound from the “L” channel is
output.
SOUND R : Sound from the “R” channel is
output.
REC SELECT
[
(TAPE)]: When Snapshot recording is
performed with the VIDEO/MEMORY Switch set
to “VIDEO”, still images are recorded only onto
the tape.
NARRATION
/
(TAPE/CARD): When Snapshot
[OFF]: Original sound is output on both “L” and
“R” channels in stereo.
ON: Dubbed sound is output on both “L” and “R”
recording is performed with the VIDEO/
MEMORY Switch set to “VIDEO”, still images
are recorded not only onto the tape but also in
the memory card (640 x 480 pixels). In this
mode, the “SNAP/SLOW” selection in CAMERA
Menu is also applicable to memory card
recording.
channels in stereo. (੬ pg. 55)
MIX: Original and dubbed sounds are combined
and output in stereo on both “L” and “R”
channels.
INT.SHOT
[OFF]: Disables the function.
ON: Enables interval shooting. (੬ pg. 29)
Download from Www.Somanuals.com. All Manuals Search And Download.
MENUS FOR DETAILED ADJUSTMENT
42
EN
REC MODE
[SP] / LP
DATE/TIME
Allows you to set the video recording mode (SP
or LP) depending on your preference. It is
recommended you use “REC MODE” in VIDEO
Menu when using this camcorder as a recorder
during dubbing. (੬ pg. 52, 53)
When set to “AUTO”, the date/time are displayed
in the following cases:
the date/time when scenes are recorded.
● When the date is changed during playback.
TIME CODE
[OFF] / ON
COPY
੬ pg. 21, “Time Code”
[OFF]: When the SNAPSHOT button is pressed
during tape playback, the playback image
pauses and normal playback will resume after
approximately 6 seconds. (The still image is not
recorded.)
ON: Enables dubbing of images recorded on a
tape to a memory card. (੬ pg. 33)
LANGUAGE
ESPAÑOL / ITALIANO / NEDERLANDS /
PORTUGUÊS / РУССКИЙ /
/
/
/
The language setting can be changed.
(੬ pg. 16)
NAVI.DEL.
IMAGE SEL. / TAPE SEL. / ALL / RETURN
੬ pg. 50, “To delete thumbnail images”
AUDIO LEV.
OFF / [ON]
BLANK SRCH
੬ pg. 22, “Blank Search”
SYSTEM
Each setting is linked with “s SYSTEM”, which
appears when the Power Switch is set to “M”.
(੬ pg. 37)
● The parameters are the same as in the
description on page 39.
VIDEO DISPLAY
The “n” (VIDEO DISPLAY) settings are
effective only for video playback except
“BRIGHT” and “AUDIO LEV.”.
● The parameters (except “OFF” in ON SCREEN
settings) are the same as in the description
(CAMERA DISPLAY) on page 40.
[ ] = Factory-preset
BRIGHT
੬ pg. 17, “Brightness Adjustment Of The
Display”
ON SCREEN
OFF / [LCD] / LCD/TV
When set to “OFF”, the camcorder’s display
disappears.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES FOR RECORDING
EN
43
LED Light
LED Light can be used to
brighten the subject in the dark
place during video recording or
D.S.C. shooting.
5-Second Recording
Record a vacation or an important event in 5-
second clips to keep the action moving. This
function is available only for video recording.
1 Set “5S” to “5S”. (੬ pg. 39)
● The “5S” indicator appears.
1 Press LIGHT repeatedly to
change the setting.
2 Press the Recording Start/Stop Button to
start recording, and after 5 seconds the
camcorder enters Record-Standby mode
automatically.
LED Light
OFF: Turns off the light.
ON: The light is on always. (
appears.)
AUTO: The light turns on automatically when
dark. ( appears.)
● Even if you press the Recording Start/Stop Button
again within 5 seconds after recording starts,
Record-Standby mode is not engaged.
2 Press the Recording Start/Stop Button to
start video recording or SNAPSHOT to shoot a
still image.
3 To exit the 5S mode, select “OFF” in step 1.
To take a snapshot in the 5-second recording
mode
Instead of pressing the Recording Start/Stop
Button in step 2, select the desired Snapshot
mode in CAMERA Menu (੬ pg. 38), then press
SNAPSHOT. The camcorder records a 5-
second still. When “5S” is set to “Anim.”, this
function is not available.
NOTES:
● Be careful not to point the LED Light directly to
eyes.
● If the light does not reach the subject, the Night-
Scope function will be activated, and makes it
possible to shoot the subject brighter.
● There is a difference in the brightness of the
images shot between the centre area which is
illuminated by the LED Light and the surrounding
areas (which will be darker).
● Since subjects are shot at a reduced shutter
speed when the LED Light setting is “ON”, they
will appear slightly blurred.
NOTE:
When “5S” is set to “Anim.”, the 5-Second
Recording mode is not available. Animation
recording of a few frames only is taken instead.
Live Slow
This feature is useful for recording or playing
back precious or hard-to-see moments at a slow
speed. Sound is recorded and played back in
real time.
1 Set the VIDEO/MEMORY Switch to “VIDEO”.
2 Set “SNAP/SLOW” to “SLOW”.
(੬ pg. 37, 38) The Live Slow indicator “
”
appears.
3 Press SLOW during recording or playback.
● The moving pictures are divided into four
frames. They are recorded or played back for
1.5 seconds, and then normal recording or
playback resumes.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES FOR RECORDING
EN
44
Night-Scope
Snapshot (For Video Recording)
Makes dark subjects or areas even brighter than This feature lets you record still images that look
they would be under good natural lighting.
Although the recorded image is not grainy, it may
look as if it is strobing due to the slow shutter
speed.
like photographs onto a tape.
3 Set “SNAP/SLOW” to the desired mode.
1 Set the Power Switch to “M”.
(੬ pg. 37, 38) The Snapshot indicator “
”
2 Set “r” to “NIGHTSCOPE”. (੬ pg. 48) The
appears.
Night-Scope indicator “
” appears.
4 Press SNAPSHOT.
● The shutter speed is automatically adjusted to
● There is the sound effect of a shutter closing.
● The “O” indication appears and a still image
will be recorded for approx. 6 seconds, then the
camcorder re-enters the Record-Standby mode.
● You can perform Snapshot also during recording.
A still image will be recorded for approx.
provide up to 25 times sensitivity.
● “ ” appears beside “
” while the shutter speed
is being automatically adjusted.
To deactivate Night-Scope
Set “r” to “OFF” so that the Night-Scope
indicator disappears.
6 seconds, then the normal recording resumes.
● Regardless of the Power Switch position (“A” or
“M”), Snapshot recording takes place using the
selected Snapshot mode.
NOTES:
● During Night-Scope, the following functions or
settings cannot be activated and its indicator
blinks or goes out:
Motor Drive Mode
• Some modes of “Program AE With Special
Effects” (੬ pg. 48).
Keeping SNAPSHOT pressed in step 4 provides
an effect similar to serial photography. (Interval
between still images: approx. 1 second)
• “GAIN UP” in CAMERA Menu (੬ pg. 38).
• “DIS” in MANUAL Menu (੬ pg. 39).
● During Night-Scope, it may be difficult to bring the
camcorder into focus. To prevent this, use of a
tripod is recommended.
● The Motor Drive mode is disabled when “REC
SELECT” is set to “
/
”. (੬ pg. 41)
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES FOR RECORDING
EN
45
Manual Focus
Exposure Control
Manual exposure control is recommended in the
following situations:
● When shooting using reverse lighting or when the
background is too bright.
● When shooting on a reflective natural background
such as at the beach or when skiing.
● When the background is overly dark or the subject
is bright.
The camcorder’s Full Range AF system offers
continuous shooting ability from close-up (as
close as approx. 5 cm to the subject) to infinity.
However, correct focus may not be obtained
depending on the shooting condition. In this
case, use the manual focus mode.
1 Set the Power Switch to
“M”.
1 Set the Power Switch to “M”.
2 Press FOCUS. The
manual focus indicator
appears.
2 Set “p” to “MANUAL”. (੬ pg. 37)
● The exposure control indicator appears.
image, press <. (maximum 6)
● +3 exposure has the same effect as the backlight
compensation. (੬ pg. 46)
● –3 exposure has the same effect as when “r” is
set to “SPOTLIGHT”. (੬ pg. 49)
3 Press < or > to focus on
a subject.
Manual focus
indicator
● When the focus level
cannot be adjusted any
further or closer, “ ” or “ ” will blink.
4 Press SET. Focus adjustment is complete.
To reset to Auto Focus
4 Press SET. Exposure adjustment is
complete.
Press FOCUS twice or set the Power Switch to
“A”.
To return to automatic exposure control
Select “AUTO” in step 2. Or, set the Power
Switch to “A”.
Manual focus is recommended in situations
listed below.
● When two subjects overlap in the same scene.
● When illumination is low.*
● When the subject has no contrast (difference in
brightness and darkness), such as a flat, one-
colour wall, or a clear, blue sky.*
● When a dark object is barely visible in the LCD
monitor or the viewfinder.*
● When the scene contains minute patterns or
identical patterns that are regularly repeated.
● When the scene is affected by sunbeams or light
reflecting off the surface of a body of water.
● When shooting a scene with a high-contrast
background.
NOTES:
● You cannot use the manual exposure control at
the same time when “r” is set to “SPOTLIGHT”
or “SNOW” (੬ pg. 48), or with the backlight
compensation.
● If the adjustment does not cause any visible
change in brightness, set “GAIN UP” to “AUTO”.
(੬ pg. 37, 38)
* The following low-contrast warnings appear
blinking:
,
,
and
.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES FOR RECORDING
EN
46
To cancel Backlight Compensation
Press BACK LIGHT twice so that the “
indicator disappears.
Iris Lock
”
Like the pupil of the human eye, the iris
contracts in well-lit environments to keep too
much light from entering, and dilates in dim
environments to allow in more light.
Use this function in the following situations:
● When shooting a moving subject.
NOTE:
Using Backlight Compensation may cause the light
around the subject to become too bright and the
subject to become white.
● When the distance to the subject changes (so its
size in the LCD monitor or the viewfinder
changes), such as when the subject is backing
away.
● When shooting on a reflective natural background
such as at the beach or when skiing.
● When shooting objects under a spotlight.
● When zooming.
Selection of a spot metering area enables more
precise exposure compensation. You can select
one of the three metering areas on the LCD
monitor/viewfinder.
1 Set the Power Switch to “M”.
Exposure Control indicator “ ” appears.
● A spot metering area frame appears at the
centre of the LCD monitor/viewfinder.
2 Set “p” to “MANUAL”. (੬ pg. 37)
● The exposure control indicator appears.
3 Adjust zoom so that the subject fills the LCD
monitor or the viewfinder, then press and hold
SET for over 2 seconds. The exposure control
indicator and the “ ” indication appear.
3 Press > or < to select the desired spot
metering area frame.
4 Press SET.
● Spot Exposure Control is engaged.
● Exposure is adjusted to make the brightness of
the selected area most appropriate.
4 Press SET. The “ ” indication changes to
“
” and the iris is locked.
To return to automatic iris control
Select “AUTO” in step 2. Or, set the Power
Switch to “A”.
To lock the iris
After step 3, press and hold SET over 2
seconds. The “ ” indication appears and the
iris is locked.
● The exposure control indicator and “
”
disappear.
To lock the exposure control and the iris
After step 2, adjust the exposure by pressing
or . Then lock the iris in steps 3 and 4. For
automatic locking, select “AUTO” in step 2. The
exposure control and the iris become automatic.
To cancel Spot Exposure Control
Press BACK LIGHT once so that the “
indicator disappears.
”
NOTES:
● You cannot use the Spot Exposure Control at the
same time with following functions.
Backlight Compensation
Backlight compensation brightens the subject
quickly.
• “SQUEEZE” in “WIDE MODE” (੬ pg. 39)
• “STROBE” in “PROGRAM AE” (੬ pg. 48)
• Digital Zoom (੬ pg. 20)
• Manual Exposure Control
With simple operation, backlight compensation
feature brightens the dark subject portion by
increasing the exposure.
● Depending on the shooting location and condition,
optimum result may not be attained.
1 Set the Power Switch to “M”.
2 Press BACK LIGHT so that the Backlight
Compensation indicator “ ” appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES FOR RECORDING
EN
47
The white balance refers to the correctness of
Adjust the white
colour reproduction under various lighting. If the balance manually
white balance is correct, all other colours will be when shooting under
accurately reproduced.
various types of
lighting.
The white balance is usually adjusted
automatically. However, more advanced
camcorder operators control this function
manually to achieve a more professional colour/
tint reproduction.
1 Set the Power
2 Select “MWB” in
“u W.BALANCE” menu. (੬ pg. 37)
To change the setting
● The
indication blinks slowly.
Set “u” to the desired mode. (੬ pg. 37)
● The selected mode indicator except “AUTO”
appears.
3 Hold a sheet of plain white paper in front of
the subject. Adjust zoom or position yourself so
that the white paper fills the screen.
[AUTO]: White balance is adjusted
automatically.
4 Press and hold SET until
begins blinking
rapidly.
MWB: Adjust the white balance manually
when shooting under various types of lighting.
(੬ “Manual White Balance Adjustment”)
● When the setting is completed,
normal blinking.
resumes
5 Press SET twice. The Menu Screen closes
FINE: Outdoors on a sunny day.
CLOUD: Outdoors on a cloudy day.
HALOGEN: A video light or similar type of
lighting is used.
[ ] = Factory-preset
and the Manual White Balance indicator
displayed.
is
NOTES:
● In step 3, it may be difficult to focus on the white
paper. In such a case, adjust focus manually.
(੬ pg. 45)
To return to automatic white balance
Set “u” to “AUTO”. (੬ pg. 37)
Or, set the Power Switch to “A”.
● A subject can be shot under various types of
lighting conditions indoors (natural, fluorescent,
candlelight, etc.). Because the colour temperature
is different depending on the light source, the
subject tint will differ depending on the white
balance settings. Use this function for a more
natural result.
● Once you adjust white balance manually, the
setting is retained even if the power is turned off or
the battery removed.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES FOR RECORDING
EN
48
wipe out from left to right.
Wipe Or Fader Effects
WIPE–DOOR: Wipe in as the two halves of
a black screen open to the left and right,
revealing the scene, or wipe out and the black
screen reappears from left and right to cover the
scene.
These effects let you make pro-style scene
transitions. Use them to spice up the transition
from one scene to the next.
Wipe or Fader works when video recording is
started or stopped.
WIPE–SCROLL: The scene wipes in from
the bottom to the top of a black screen, or wipes
out from top to bottom, leaving a black screen.
1 Set the VIDEO/MEMORY Switch to “VIDEO”.
2 Set the Power Switch to “M”.
WIPE–SHUTTER: Wipe in from the centre
of a black screen toward the top and bottom, or
wipe out from the top and bottom toward the
centre leaving a black screen.
3 Set “v” to the desired mode. (੬ pg. 37)
● The WIPE/FADER menu disappears and the
effect is reserved.
● The selected effect indicator appears.
4 Press the Recording Start/Stop Button to
activate the Fade-in/out or Wipe-in/out.
Program AE With Special Effects
To deactivate the selected effect
Select “OFF” in step 3. The effect indicator
disappears.
1 Set the Power Switch to “M”.
2 Set “r” to the desired mode. (੬ pg. 37)
● The PROGRAM AE menu disappears and the
selected effect is activated.
NOTES:
● You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.
● The selected effect indicator appears.
To deactivate the selected effect
Select “OFF” in step 2. The effect indicator
disappears.
● Some Wipe/Fader Effects cannot be used with
certain modes of Program AE with special effects.
(See the right column.) In this case, the selected
indicator blinks or goes out.
NOTES:
● Program AE with special effects can be changed
during recording or during Record-Standby.
● Some modes of Program AE with special effects
cannot be used during Night-Scope.
WIPE/FADER
OFF: Disables the function. (Factory-preset)
● When a subject is too bright or reflective, a vertical
streak may appear (smear phenomenon). Smear
phenomenon tends to occur when “SPORTS” or
any mode of “SHUTTER 1/250 – 1/4000” is
selected.
● Some modes of Program AE with special effects
cannot be used with certain Wipe/Fader effects.
(See the left column.) In this case, the selected
indicator blinks or goes out.
FADER–WHITE: Fade in or out with a white
screen.
FADER–BLACK: Fade in or out with a black
screen.
FADER–B.W: Fade in to a colour screen
from a black and white screen, or fade out from
colour to black and white.
WIPE–CORNER: Wipe in on a black screen
from the upper right to the lower left corner, or
wipe out from lower left to upper right, leaving a
black screen.
WIPE–WINDOW: The scene starts in the
centre of a black screen and wipes in toward the
corners, or comes in from the corners, gradually
wiping out to the centre.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES FOR RECORDING
EN
49
SEPIA: Recorded scenes have a brownish
tint like old photos. Combine this with the
Cinema mode for a classic look.
MONOTONE: Like classic black and white
films, your footage is shot in B/W. Used together
with the Cinema mode, it enhances the “classic
film” effect.
CLASSIC FILM*: Gives recorded scenes a
strobe effect.
STROBE*: Your recording looks like a
series of consecutive snapshots.
MIRROR*: Creates a mirror image on the
right half of the screen, juxtaposed to the normal
image on the other half.
* Available only when the VIDEO/MEMORY Switch
is set to “VIDEO”.
PROGRAM AE
OFF: Disables the function. (Factory-preset)
NIGHTSCOPE: (੬ pg. 44)
SHUTTER 1/50: The shutter speed is fixed
at 1/50th of a second. Black bands that usually
appear when shooting a TV screen become
narrower.
SHUTTER 1/120: The shutter speed is
fixed at 1/120th of a second. The flickering that
occurs when shooting under a fluorescent light
or mercury-vapour lamp is reduced.
SHUTTER 1/250/ SHUTTER 1/500/
SHUTTER 1/1000*/ SHUTTER 1/2000*/
SHUTTER 1/4000*: These settings allow fast-
moving images to be captured one frame at a
time, for vivid, stable slow-motion playback by
fixing shutter speed variables. Use these
settings when an automatic adjustment does not
work well, using SPORTS mode. The faster the
shutter speed, the darker the picture becomes.
Use the shutter function under good lighting
conditions.
Navigation Function
The Navigation Function helps you check tape
memory card.
SPORTS
Before continuing
(Variable Shutter Speed: 1/250 – 1/4000):
This setting allows fast-moving images to be
captured one frame at a time, for vivid, stable
slow-motion playback. The faster the shutter
speed, the darker the picture becomes. Use the
shutter function under good lighting conditions.
To use Navigation functions, load a cassette and
memory card, then set the VIDEO/MEMORY
Switch to “VIDEO”.
To make thumbnail images during video
recording automatically
SNOW: Compensates for subjects that may
otherwise appear too dark when shooting in
extremely bright surroundings such as in the
snow.
1 Set “NAVIGATION” to the desired navigation
storing time. (੬ pg. 37, 38)
● If the “
” indicator appears blinking on the
screen, wait until it stops blinking. If it does not
stop blinking after a while, check if a memory card
is loaded.
SPOTLIGHT: Compensates for subjects
that may otherwise appear too bright when
shooting under extremely strong direct lighting
such as spotlights.
TWILIGHT: Makes evening scenes look
more natural. White Balance (੬ pg. 47) is
automatically set to “ ”, but can be changed to
your desired setting. When Twilight is chosen,
the camcorder automatically adjusts the focus
from approx. 10 m to infinity. From less than 10
m, adjust the focus manually.
2 Set the Power Switch to “A” or “M”.
3 Press the Recording Start/Stop Button to
start recording.
● When the recording time is over the navigation
time set in step 1, “
” appears briefly, then the
image of the point where recording is started is
captured and stored in the memory card as a
thumbnail image.
● If the Recording Start/Stop button is pressed
before “
” stops blinking, the image of the point
where the loaded memory card is recognised is
captured.
4 Press the Recording Start/Stop Button to
stop recording.
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES FOR RECORDING
EN
50
To make thumbnail images after video
recording manually
To add thumbnail images during video
playback
1 Set “NAVIGATION” to “MANUAL”.
(੬ pg. 37, 38)
1 Set the Power Switch to “PLAY”.
2 Press 4/9 to start video playback.
3 Press STORE at the desired point.
2 Set the Power Switch to “A” or “M”.
3 After the recording, press STORE.
● The “
” indicator appears briefly and the
● The “
” indicator appears briefly and the image
captured image is stored in the memory card as a
thumbnail image.
of the point where STORE is pressed is stored in
the memory card as a thumbnail image.
NOTES:
To delete thumbnail images
● The remaining number of storable thumbnail
images also appears on the screen when it
reaches 10 or less. If “REC SELECT” is set to
1 Set the Power Switch to “PLAY”.
“
/
” in DSC Menu, the number shows
2 Press MENU. The Menu Screen appears.
how many 640 x 480 pixel images can be stored.
● If “5S” is set to “5S” or “Anim.” in MANUAL Menu,
the NAVIGATION function will not work properly.
3 Press SET to select “t”. The VIDEO Menu
appears.
V I DEO
4 Press or to select
SOUND MODE– STEREO
To find scenes on tape using thumbnail
images (Navigation Search)
“NAVI.DEL.”, and press
NARRAT I ON
REC MODE
–
–
OFF
SET. The Sub Menu
appears.
COPY–OFF
NAV I . DEL .
IMAGE SEL.
TAPE SEL.
ALL
BLANK SRCH
RETURN
1 Set the Power Switch to “PLAY”.
5 By pressing or
:
RETURN
Select “IMAGE SEL.” to
delete the currently
2 Press INDEX during video playback or stop
mode.
displayed thumbnail image.
● The loaded cassette’s
NAV I GAT I ON
Navigation thumbnail
image screen appears.
DATE : 24
.
5 ’ 0 4
3 : 2 9
Select “TAPE SEL.” to delete all thumbnail
images for the tape which contains the currently
displayed image.
Select “ALL” to delete all thumbnail images
stored in the memory card at once.
TC
:
1 3 : 2 3 : 1 5
1
2
3
3 Press >/</ / to select
the desired image, and
press SET.
4
5
● The “NAVIGATION
NAV I GAT I ON
6 Press SET. The
SEARCH” indication appears blinking and the
camcorder starts searching the tape for the
relevant point of the selected thumbnail image.
DELETE CURRENT?
NAVIGATION screen
appears.
7 Press or to select
2 6 . 1 2 . 0 4 1 5 : 0 0
EXECUTE
RETURN
To cancel Navigation search midway
Press 4/9, 3, 5 or 8.
“EXECUTE”, and press
SET.
● Press < to display the
previous image. Press > to display the next image.
● To cancel deletion, select “RETURN”.
● Thumbnail images cannot be deleted during video
playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES FOR RECORDING
EN
51
CAUTION:
Do not remove the memory card or perform any
other operation (such as turning off the camcorder)
during deletion. Also, be sure to use the provided
AC Adapter, as the memory card may be corrupted
if the battery becomes exhausted during deletion. If
the memory card becomes corrupted, initialise it.
NOTES:
● Be sure to always use the same tape and memory
card together as they were during recording;
otherwise, the camcorder cannot recognise Tape
and Memory Card IDs to perform Navigation
Function properly.
● Check if an appropriate tape and memory card
are loaded when the following messages appear:
“UNABLE TO USE NAVIGATION”, “THIS
MEMORY CARD IS NOT COMPATIBLE”.
● If you change the memory card while shooting on
one tape, two memory cards will share the tape’s
thumbnail images. We recommend that you use
one memory card for one tape.
● Navigation Search does not work if the current
position is at a blank portion on the tape. Also, do
not leave a blank portion partway through the tape
when shooting; otherwise, Navigation Function
does not work properly.
● Before shooting newly over a recorded tape, be
sure to delete all thumbnail images of the previous
recording from the relevant memory card.
● If you copy thumbnail images from one memory
card to another via a PC, Navigation Search does
not work with the copied memory card.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
52
Dubbing To A VCR
NOTES:
● Set the video out select switch of the cable
adapter as required:
Open the cover.
Y/C: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-Video cable.
CVBS: When connecting to a TV or VCR which
does not accept Y/C signals and uses an audio/
video cable.
To S connector
● The S-Video cable is optional. Be sure to use
the YTU94146A S-Video cable. Consult the
JVC Service Center described on the sheet
included in the package for details on its
availability. Make sure to connect the end with
a core filter to the camcorder. The core filter
reduces interference.
To AV connector
S cable
(optional)
AV cable
(provided)
1 Following the illustrations, connect the
camcorder and the VCR’s input connectors.
3 At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR’s
instruction manual.)
1
2
3
4
4 To stop dubbing, stop recording on the VCR,
Cable
then stop playback on the camcorder.
Adapter*
“Y/C”/“CVBS”
Video Out Select
Switch
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(੬ pg. 15)
TV
To VCR
● To choose whether or not the following displays
appear on the connected TV
• Date/time
VCR
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(੬ pg. 37, 42) Or, press DISPLAY on the
remote control to turn on/off the date indication.
• Time code
Set “TIME CODE” to “OFF” or “ON”.
(੬ pg. 37, 42)
• Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/
TV”. (੬ pg. 37, 42)
A To S-VIDEO IN**
B Yellow to VIDEO IN
C Red to AUDIO R IN
D White to AUDIO L IN
*
If your VCR has a SCART connector, use the
provided cable adapter.
** Connect when your TV/VCR has an S-VIDEO IN
connector. In this case, it is not necessary to
connect the yellow video cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
53
1 Make sure all units are turned off.
Dubbing To A Video Unit Equipped
With A DV Connector (Digital
Dubbing)
It is also possible to copy recorded scenes from
the camcorder onto another video unit equipped
with a DV connector. Since a digital signal is
sent, there is little if any image or sound
deterioration.
2 Connect this camcorder to a video unit
equipped with a DV input connector using a DV
cable as shown in the illustration.
4 At the point you want to start dubbing, start
recording on the video unit. (Refer to the video
unit’s instruction manual.)
5 To stop dubbing, stop recording on the video
unit, then stop playback on this camcorder.
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(੬ pg. 15)
● If a blank portion or disturbed image is played
back on the player during dubbing, the dubbing
may stop so that an unusual image is not dubbed.
● Even though the DV cable is connected correctly,
sometimes the image may not appear in step 4. If
this occurs, turn off the power and make
connections again.
To DV OUT
● If “Playback Zoom” (੬ pg. 27) or “Playback
Special Effects” (੬ pg. 27) is attempted or
SNAPSHOT is pressed during playback, only the
original playback image recorded on the tape is
output from the DV OUT connector.
● When using a DV cable, be sure to use the
optional JVC VC-VDV204U DV cable.
DV cable
Core filter
(optional)
To DV IN
Video unit equipped with DV connector
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
54
[A] Using USB cable
It is possible to do the following thing:
● Transfer still images stored on a memory card
to a PC.
Connection To A Personal Computer
[A] Using USB cable [B] Using DV cable
OR
[B] Using DV cable
It is also possible to transfer still/moving images
to a PC with a DV connector by using the
software equipped with the PC or commercially
available software.
®
If you are using a Windows XP, you can use
®
Windows Messenger to conduct video
To USB
conferences over the Internet, using a
camcorder. For details, refer to the help for the
Windows Messenger.
To DV OUT
®
NOTES:
● Refer to “SOFTWARE INSTALLATION AND PC
CONNECTION GUIDE” for the bundled software
and drivers.
Core filter
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(੬ pg. 15)
● Never connect the USB cable and the DV
cable simultaneously to the camcorder.
Connect only the cable you wish to use to the
camcorder.
DV cable
USB cable
(optional)
(provided)
Core filter
● When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U DV
cable depending on the type of DV connector
(4 or 6 pins) on the PC.
To USB
To DV connector
connector
● If the PC connected to the camcorder via the USB
cable is not powered, the camcorder does not
enter the USB mode.
● The date/time information cannot be captured into
the PC.
● Refer to the instruction manuals of the PC and
Software.
PC with DV connector
PC
● The still images can also be transferred to a PC
with a DV connector-equipped capture board.
● The system may not work properly depending on
the PC or capture board you are using.
When connecting the camcorder to a PC
using a DV cable, make sure to follow the
procedure below. Connecting the cable
incorrectly may cause malfunctions to the
camcorder and/or the PC.
● Connect the DV cable first to the PC, and then
to the camcorder.
● Connect the DV cable (plugs) correctly
according to the shape of the DV connector.
“USB” appears on the LCD monitor while the
PC is accessing data in the camcorder or the
camcorder is transferring a file to the PC.
NEVER disconnect the USB cable while
“USB” is displayed on the LCD monitor
since this can result in product damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
55
To hear the dubbed sound during playback
Set “NARRATION” to “ON” or “MIX”.
(੬ pg. 37, 41)
Audio Dubbing
The audio track can be customised only when
recorded in the 12-BIT and SP modes.
(੬ pg. 38)
NOTES:
● Sound is not heard from the speaker during Audio
Dubbing.
● Use the provided remote control.
● When editing onto a tape that was recorded at
12-BIT, the old and new soundtracks are recorded
separately.
Microphone Connector
● If you dub onto a blank space on the tape, the
sound may be disrupted. Make sure you only edit
recorded areas.
● If feedback or howling occurs during TV playback,
move the camcorder’s microphone away from the
TV, or turn down the TV’s volume.
● If you change from 12-BIT to 16-BIT in mid-
recording and then use the tape for Audio
Dubbing, it is not effective from the point where
16-BIT recording began.
Speaker
START/
STOP
Stereo Microphone
PAUSE
● During Audio Dubbing, when the tape moves to
scenes recorded in the LP mode, scenes
recorded in 16-BIT audio or a blank portion, Audio
Dubbing stops.
● Audio dubbing is also possible using an optional
microphone connected to the MIC connector.
● While an optional microphone is connected, the
built-in microphone is disabled.
REW
INSERT
PLAY
STOP
A.DUB
1 Play back the tape to locate the point where
editing will start, then press PAUSE (9).
2 While holding A. DUB (D) on the remote
control, press PAUSE (9). The “9D” and “MIC”
indicators appear.
3 Press PLAY (U), then begin “narrating”.
Speak into the microphone.
● To pause dubbing, press PAUSE (9).
4 To end Audio Dubbing, press PAUSE (9),
then STOP (8).
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
EN
56
Insert Editing
You can record a new scene into a previously
recorded tape, replacing a section of the original
recording with minimal picture distortion at the in
and out points. The original audio remains
unchanged.
● Use the provided remote control.
NOTES:
● Before performing the following steps, make sure
that “TIME CODE” is set to “ON”. (੬ pg. 37, 42)
● Insert Editing is not possible on a tape recorded in
the LP mode or on a blank portion of a tape.
1 Play back the tape, locate the Edit-Out point
and press PAUSE (9). Confirm the time code at
this point. (੬ pg. 21)
2 Press REW (3) until the Edit-In point is
located, then press PAUSE (9).
3 Press and hold INSERT (I) on the remote
control, then press PAUSE (9). The “9I”
indicator and the Time Code (min.:sec.) appear
and the camcorder enters Insert-Pause mode.
4 Press START/STOP to begin editing.
● Confirm the insert at the time code you checked in
step 1.
● To pause editing, press START/STOP. Press it
again to resume editing.
5 To end Insert Editing, press START/STOP,
then STOP (8).
NOTES:
● Program AE with special effects (੬ pg. 48) can
be used to spice up the scenes being edited
during Insert Editing.
● During Insert Editing, the date and time
information changes.
● If you perform Insert Editing onto a blank space on
the tape, the audio and video may be disrupted.
Make sure you only edit recorded areas.
● During Insert Editing, when the tape moves to
scenes recorded in the LP mode or a blank
portion, Insert Editing stops. (੬ pg. 60)
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
57
If, after following the steps in the chart below, the
problem still exists, please consult your nearest
JVC dealer.
The LCD monitor or viewfinder indications
● Certain Wipe/Fader effects, certain modes of
Program AE with special effects, “DIS” and other
functions that cannot be used together are
selected at the same time.
HRe-read the sections covering Wipe/Fader
effects, Program AE with special effects and
“DIS”. (੬ pg. 37, 39, 48)
The camcorder is a microcomputer-controlled
device. External noise and interference (from a
TV, a radio, etc.) might prevent it from
functioning properly. In such cases, first
disconnect its power supply unit (battery pack,
AC Adapter, etc.) and wait a few minutes; and
then re-connect it and proceed as usual from
the beginning.
Digital Zoom does not work.
● 15X optical zoom is selected.
HSet “ZOOM” to “60X” or “700X”. (੬ pg. 38)
“MEMORY”.
Power
No power is supplied.
HSet the VIDEO/MEMORY Switch to “VIDEO”.
● The power is not connected properly.
HConnect the AC Adapter securely. (੬ pg. 15)
● The battery pack is not attached firmly.
HDetach the battery pack once again and re-attach
it firmly. (੬ pg. 13)
● The battery is dead.
HReplace the dead battery with a fully charged
Video and D.S.C. Playback
The tape is moving, but there is no picture.
● Your TV has AV input terminals, but is not set to
its VIDEO mode.
HSet the TV to the mode or channel appropriate for
one. (੬ pg. 13)
video playback. (੬ pg. 23)
● The cassette holder cover is open.
HClose the cassette holder cover. (੬ pg. 17)
Video and D.S.C. Recording
Recording cannot be performed.
Blocks of noise appear during playback, or
there is no playback picture and the screen
becomes blue.
● The tape’s erase protection tab is set to “SAVE”.
HSet the tape’s erase protection tab to “REC”.
(੬ pg. 17)
HClean the video heads with an optional cleaning
cassette. (੬ pg. 64)
● “TAPE END” appears.
HReplace with new cassette. (੬ pg. 17)
● The cassette holder cover is open.
HClose the cassette holder cover.
Advanced features
The focus does not adjust automatically.
When shooting a subject illuminated by
bright light, vertical lines appear.
● Focus is set to the Manual mode.
HSet Focus to the Auto mode. (੬ pg. 45)
● The lens is dirty or covered with condensation.
HClean the lens and check the focus again.
(੬ pg. 61)
● This is not a malfunction.
When the screen is under direct sunlight
during shooting, the screen becomes red or
black for an instant.
In the 5-Second mode, recording ends
before 5 seconds have elapsed.
● This is not a malfunction.
● The 5-Second mode is set to “Anim.” in MANUAL
Menu.
HSet “5S” to “5S” in MANUAL Menu.
(੬ pg. 37, 43)
During recording, the date/ time does not
appear.
● “DATE/TIME” is set to “OFF”.
HSet “DATE/TIME” to “ON”. (੬ pg. 37, 40)
Snapshot mode cannot be used.
● The Squeeze mode (SQUEEZE) is selected.
HDisengage the Squeeze (SQUEEZE) mode.
(੬ pg. 37, 39)
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
58
The colour of Snapshot looks strange.
“SET DATE/TIME!” appears.
● The light source or the subject does not include
white. Or there are various different light sources
behind the subject.
HFind a white subject and compose your shot so
that it also appears in the frame. (੬ pg. 28, 44)
● The date/time is not set.
HSet the date/time. (੬ pg. 16)
previously set date/time has been erased.
HConsult your nearest JVC dealer for replacement.
The image taken using Snapshot is too
dark.
Files stored in the memory card cannot be
deleted.
HPress BACK LIGHT. (੬ pg. 46)
HRemove protection from the files stored in the
memory card and delete them. (੬ pg. 33)
The image taken using Snapshot is too
bright.
When the image is printed from the printer,
a black bar appears at the bottom of the
screen.
● The subject is too bright.
HSet “r” to “SPOTLIGHT”. (੬ pg. 49)
● This is not a malfunction.
White Balance cannot be activated.
this can be avoided.
● The Sepia (SEPIA) or Monotone (MONOTONE)
mode is activated.
HDisengage the Sepia (SEPIA) or Monotone
(MONOTONE) mode before setting White
Balance. (੬ pg. 49)
When the camcorder is connected via the
DV connector, the camcorder does not
operate.
● The DV cable was plugged/unplugged with power
turned on.
The Black & White Fader does not work.
HTurn the camcorder’s power off and on again,
then operate it.
● The Sepia (SEPIA) or Monotone (MONOTONE)
mode is activated.
(MONOTONE). (੬ pg. 49)
Images on the LCD monitor appear dark or
whitish.
The image looks like the shutter speed is
too slow.
become dark due to the characteristics of the
LCD monitor. This is not a malfunction.
HAdjust the brightness and angle of the LCD
monitor. (੬ pg. 17, 19)
● When shooting in the dark, the unit becomes
highly sensitive to light when “GAIN UP” is set to
“AUTO”.
● When the LCD monitor’s fluorescent light reaches
the end of its service life, images on the LCD
monitor become dark.
HIf you want the lighting to look more natural, set
“GAIN UP” to “AGC” or “OFF”. (੬ pg. 37, 38)
Other problems
HConsult your nearest JVC dealer.
Coloured bright spots appear all over the
LCD monitor or the viewfinder.
The POWER/CHARGE lamp on the
camcorder does not light during charging.
● The LCD monitor and the viewfinder are made
with high-precision technology. However, black
spots or bright spots of light (red, green or blue)
may appear constantly on the LCD monitor or the
viewfinder. These spots are not recorded on the
tape. This is not due to any defect of the unit.
(Effective dots: more than 99.99%)
● Charging is difficult in places subject to extremely
high/low temperatures.
HTo protect the battery, it is recommended to
charge it in places with a temperature of 10°C to
35°C. (੬ pg. 62)
● The battery pack is not attached firmly.
HDetach the battery pack once again and re-attach
it firmly. (੬ pg. 13)
The cassette will not load properly.
● The battery’s charge is low.
HInstall a fully charged battery. (੬ pg. 13)
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
59
Warning Indications
The memory card cannot be removed from
the camcorder.
(੬ pg. 18)
Displays the battery remaining power.
Remaining power level
Picture does not appear on the LCD
monitor.
High
● The viewfinder is pulled out and “PRIORITY” is
set to “FINDER”.
HPush the viewfinder back in or set “PRIORITY” to
As the battery power comes close to nil, the
When the battery power is exhausted, power
“LCD”. (੬ pg. 19, 37, 40)
● The LCD monitor’s brightness setting is too dark.
HAdjust the brightness of the LCD monitor.
(੬ pg. 17)
HIf the monitor is tilted upward 180 degrees, open
the monitor fully. (੬ pg. 19)
Appears when no tape is loaded. (੬ pg. 17)
CHECK TAPE’S ERASE PROTECTION TAB
An error indication (01 – 04 or 06) appears.
Appears when the erase protection tab is set to
“SAVE” while the Power Switch is set to “A” or
“M” and the VIDEO/MEMORY Switch is set to
“VIDEO”. (੬ pg. 15)
● A malfunction of some kind has occurred. In this
case the camcorder’s functions become
unusable.
H੬ pg. 61.
USE CLEANING CASSETTE
The remote control does not work.
Appears if dirt is detected on the heads during
recording. Use an optional cleaning cassette.
(੬ pg. 63)
● “REMOTE” is set to “OFF”.
HSet “REMOTE” to “ON”. (੬ pg. 37, 40)
● The remote control does not point at the remote
sensor.
HPoint at the remote sensor. (੬ pg. 25)
● The remote control batteries are exhausted.
HReplace the batteries with fresh ones. (੬ pg. 25)
CONDENSATION, OPERATION
PAUSED PLEASE WAIT
Appears if condensation occurs. When this
indication is displayed, wait more than 1 hour
until condensation disappears.
TAPE!
Appears if a tape is not loaded when the
Recording Start/Stop Button or SNAPSHOT
Button is pressed while the Power Switch is set
to “A” or “M” and the VIDEO/MEMORY Switch
is set to “VIDEO”.
TAPE END
Appears when the tape ends during recording or
playback.
SET DATE/TIME!
● Appears when the date/time is not set.
(੬ pg. 16)
● The built-in clock battery has run out and the
previously set date/time has been erased.
Consult your nearest JVC dealer for
replacement.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
60
LENS CAP
?
the lens cap is attached or when it is dark.
compatible with DCF or a file with a size that is
not compatible with this camcorder.
A. DUB ERROR!
COPYING FAILED
Appears if Audio Dubbing is attempted on a
blank portion of a tape. (੬ pg. 55)
● Appears if dubbing of copyguarded signals is
attempted while this camcorder is being used
as a recorder.
● Appears in the following cases when dubbing
from a tape to a memory card:
• when no memory card is loaded.
• when the memory card’s memory is full.
• when the memory card is not formatted.
• when a write-protected SD Memory Card is
loaded. (੬ pg. 33)
A. DUB ERROR!
<CANNOT DUB ON A LP RECORDED
TAPE>
<CANNOT DUB ON A 16BIT RECORDING>
<CHECK TAPE’S ERASE PROTECTION
TAB>
● Appears if Audio Dubbing is attempted on a
tape recorded in the LP mode. (੬ pg. 55)
● Appears if Audio Dubbing is attempted on a
tape recorded in 16-BIT audio. (੬ pg. 55)
● Appears if A. DUB (D) on the remote control is
pressed when the erase protection tab is set to
“SAVE”. (੬ pg. 55)
MEMORY CARD!
Appears if there is no memory card loaded when
you attempt to record on a memory card or
access data on a memory card.
PLEASE FORMAT
INSERT ERROR!
Appears when there is a problem with a memory
card and its memory is corrupt, or it has not
been initialised. Initialise the memory card.
(੬ pg. 36)
Appears if Insert Editing is attempted on a blank
portion of a tape. (੬ pg. 56)
INSERT ERROR!
<CANNOT EDIT ON A BLANK PORTION>
<CANNOT EDIT ON A LP RECORDED
TAPE>
<CHECK TAPE’S ERASE PROTECTION
TAB>
NO IMAGES STORED
Appears if there are no image files stored in the
memory card when you attempt memory card
playback.
● Appears if Insert Editing is attempted on a
blank portion of a tape.
NO E-MAIL CLIP STORED
● Appears if Insert Editing is attempted on a tape
recorded in the LP mode. (੬ pg. 56)
● Appears if INSERT (I) on the remote control
is pressed when the erase protection tab is set
to “SAVE”. (੬ pg. 56)
Appears if there are no video clip files stored in
the memory card when you attempt memory
card playback.
CARD ERROR!
Appears when the camcorder does not
recognise the loaded memory card. Remove the
memory card once and insert it again. Repeat
these procedures until no indication appears. If
the indication still appears, the memory card is
corrupted.
MEMORY IS FULL
Appears when the memory card’s memory is full
and shooting is not possible.
HDV
Appears when pictures recorded in the HDV
format are detected. The pictures in the HDV
format cannot be played back with this
camcorder.
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MAINTENANCE
EN
61
CHECK CARD’S WRITE PROTECTION
SWITCH
Cleaning The Camcorder
● Appears when you attempt to shoot digital still
images when the write protection tab on the
SD Memory Card is set to the “LOCK” position.
● Appears when you attempt MEMORY
SELECT menu operation with a write-
Before cleaning, turn off the camcorder and
remove the battery pack and AC Adapter.
To clean the exterior
Wipe gently with a soft cloth. Put the cloth in
diluted mild soap and wring it well to wipe off
heavy dirt. Then wipe again with a dry cloth.
protected SD Memory Card loaded.
UNIT IN SAFEGUARD MODE
REMOVE AND REATTACH BATTERY
To clean the LCD monitor
Wipe gently with a soft cloth. Be careful not to
damage the monitor. Close the LCD monitor.
The error indications (01, 02 or 06) show what
type of malfunction has occurred. When an error
indication appears, the camcorder turns off
automatically. Remove the power supply
(battery, etc.) and wait a few minutes for the
indication to clear. When it does, you can
resume using the camcorder. If the indication
remains, consult your nearest JVC dealer.
To clean the lens
Blow it with a blower brush, then wipe gently
with lens cleaning paper.
NOTES:
● Avoid using strong cleaning agents such as
benzine or alcohol.
● Cleaning should be done only after the battery
pack has been removed or other power units have
been disconnected.
● Mould may form if the lens is left dirty.
● When using a cleaner or chemically treated cloth
refer to the cautions of each product.
● To clean the viewfinder, please consult your
nearest JVC dealer.
UNIT IN SAFEGUARD MODE
EJECT AND REINSERT TAPE
The error indications (03 or 04) show what type
of malfunction has occurred. When an error
indication appears, the camcorder turns off
automatically. Eject the cassette once and re-
insert it, then check if the indication clears.
When it does, you can resume using the
camcorder. If the indication remains, consult
your nearest JVC dealer.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS
EN
62
Battery Packs
NOTES:
● It is normal for the battery pack to be warm after
charging, or after use.
The supplied battery
pack is a lithium-ion
battery. Before using the
supplied battery pack or
an optional battery pack,
be sure to read the
following cautions:
Terminals
Temperature Range Specifications
Charging: 10°C to 35°C
Operation: 0°C to 40°C
Storage: –20°C to 50°C
● The lower the temperature, the longer recharging
takes.
● Charging times are for a fully discharged battery
● To avoid hazards
...do not burn.
pack.
...do not short-circuit the terminals. When
transporting, make sure the provided battery cap
is attached to the battery. If the battery cap is
misplaced, carry the battery in a plastic bag.
...do not modify or disassemble.
...do not expose the battery to temperatures
exceeding 60°C, as this may cause the battery to
overheat, explode or catch fire.
...use only specified chargers.
● To prevent damage and prolong service
life
...do not subject to unnecessary shock.
...charge in an environment where temperatures
are within the tolerances shown in the chart
below. This is a chemical reaction type battery —
cooler temperatures impede chemical reaction,
while warmer temperatures can prevent
complete charging.
...store in a cool, dry place. Extended exposure to
high temperatures will increase natural discharge
and shorten service life.
...fully charge and then fully discharge the battery
every 6 months when storing the battery pack
over a long period time.
...remove from charger or powered unit when not in
use, as some machines use current even when
switched off.
Cassettes
To properly use and store your cassettes, be
sure to read the following cautions:
● During use
...make sure the cassette bears the Mini DV mark.
...be aware that recording onto prerecorded tapes
automatically erases the previously recorded
video and audio signals.
...make sure the cassette is positioned properly
when inserting.
...do not load and unload the cassette repeatedly
without allowing the tape to run at all. This
slackens the tape and can result in damage.
...do not open the front tape cover. This exposes
the tape to fingerprints and dust.
● Store cassettes
...away from heaters or other heat sources.
...out of direct sunlight.
...where they won’t be subject to unnecessary
shock or vibration.
...where they won’t be exposed to strong magnetic
fields (such as those generated by motors,
transformers or magnets).
...vertically, in their original cases.
The Benefits Of Lithium-Ion Batteries
Lithium-ion battery packs are small but have a
large power capacity. However, when one is
exposed to cold temperatures (below 10°C),
its usage time becomes shorter and it may
cease to function. If this happens, place the
battery pack in your pocket or other warm,
protected place for a short time, then re-
attach it to the camcorder.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS
EN
63
Memory Cards
Main Unit
To properly use and store your memory cards,
be sure to read the following cautions:
● During use
...make sure the memory card bears the SD or
MultiMediaCard mark.
● For safety, DO NOT
...open the camcorder’s chassis.
...disassemble or modify the unit.
...short-circuit the terminals of the battery pack.
Keep it away from metallic objects when not in
use.
...make sure the memory card is positioned
properly when inserting.
...allow inflammables, water or metallic objects to
enter the unit.
...remove the battery pack or disconnect the power
supply while the power is on.
...leave the battery pack attached when the
camcorder is not in use.
● While the memory card is being accessed
(during recording, playback, deletion,
initialisation, etc.)
...never unload the memory card and never turn off
the camcorder.
● Store memory cards
...away from heaters or other heat sources.
...out of direct sunlight.
...where they won’t be subject to unnecessary
shock or vibration.
...where they won’t be exposed to strong magnetic
fields (such as those generated by motors,
transformers or magnets).
● Avoid using the unit
...in places subject to excessive humidity or dust.
...in places subject to soot or steam such as near a
cooking stove.
...in places subject to excessive shock or vibration.
...near a television set.
...near appliances generating strong magnetic or
electric fields (speakers, broadcasting antennas,
etc.).
...in places subject to extremely high (over 40°C) or
extremely low (under 0°C) temperatures.
● DO NOT leave the unit
LCD Monitor
● To prevent damage to the LCD monitor, DO
NOT
...in places of over 50°C.
...push it strongly or apply any shocks.
...place the camcorder with the LCD monitor on the
bottom.
...in places where humidity is extremely low (below
35%) or extremely high (above 80%).
...in direct sunlight.
...in a closed car in summer.
...near a heater.
● To protect the unit, DO NOT
...allow it to become wet.
...drop the unit or strike it against hard objects.
...subject it to shock or excessive vibration during
transportation.
...keep the lens directed at extremely bright objects
for long periods.
● To prolong service life
...avoid rubbing it with coarse cloth.
● Be aware of the following phenomena for
LCD monitor use. These are not
malfunctions
...While using the camcorder, the surface around
the LCD monitor and/or the back of the LCD
monitor may heat up.
...If you leave power on for a long time, the surface
around the LCD monitor becomes hot.
...expose the lens and viewfinder’s lens to direct
sunlight.
...carry it by holding the LCD monitor or the
viewfinder.
...swing it excessively when using the hand strap or
the grip.
...swing the soft camera case excessively when the
camcorder is inside it.
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS
EN
64
● Dirty heads can cause the following
How To Handle A CD-ROM
problems:
● Take care not to soil or scratch the mirror surface
(opposite to the printed surface). Do not write
anything or put a sticker on either the front or back
surface. If the CD-ROM gets dirty, gently wipe it
with a soft cloth outward from the centre hole.
● Do not use conventional disc cleaners or cleaning
spray.
● Do not bend the CD-ROM or touch its mirror
surface.
● Do not store your CD-ROM in a dusty, hot or
humid environment. Keep it away from direct
sunlight.
...No picture during playback.
...Blocks of noise appear during playback.
...During recording or playback, the Head Clog
Warning indicator “ ” appears.
...Recording cannot be performed properly.
In such cases, use an optional cleaning
cassette. Insert it and play back. If the cassette
is used more than once consecutively, damage
to the video heads may result. After the
camcorder plays back for about 20 seconds, it
stops automatically. Also refer to the cleaning
cassette’s instructions.
If, after using the cleaning cassette, the
problems still exist, consult your nearest JVC
dealer.
Mechanical moving parts used to move the
video heads and video tape tend to become
dirty and worn out over time. In order to maintain
a clear picture at all times, periodic check-ups
are recommended after using the unit for about
1,000 hours. For periodic check-ups please
consult your nearest JVC dealer.
About moisture condensation
● You have observed that pouring a cold liquid
into a glass will cause drops of water to form on
the glass’ outer surface. This same
phenomenon occurs on the head drum of a
camcorder when it is moved from a cool place
to a warm place, after heating a cold room,
under extremely humid conditions or in a place
directly subjected to the cool air from an air
conditioner.
● Moisture on the head drum can cause severe
damage to the video tape, and can lead to
internal damage to the camcorder itself.
Serious malfunctioning
If malfunctioning occurs, stop using the unit
immediately and consult your local JVC
dealer.
The camcorder is a microcomputer-controlled
device. External noise and interference (from
a TV, a radio, etc.) might prevent it from
functioning properly. In such cases, first
disconnect its power supply unit (battery pack,
AC Adapter, etc.) and wait a few minutes and
then re-connect it and proceed as usual from
the beginning.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
EN
65
Camcorder
For Digital Still Camera
Storage media
For General
Power supply
DC 11 V (Using AC Adapter)
DC 7.2 V (Using battery pack)
Power consumption
Approx. 3.7 W (4 W*) (LCD monitor off, viewfinder on)
Approx. 4.7 W (5 W*) (LCD monitor on, viewfinder off)
SD Memory Card/MultiMediaCard
Compression system
JPEG (compatible)
File size
Still image:
4 modes (1600 x 1200 pixels/1152 x 864 pixels/
1024 x 768 pixels/640 x 480 pixels)
Moving image:
1 mode (160 x 120 pixels)
Picture quality
2 modes (FINE/STANDARD)
Approximate number of storable images
੬ pg. 28
*
Using LED Light
Dimensions (W x H x D)
75 mm x 74 mm x 111 mm (with the LCD monitor
closed and the viewfinder pushed back in)
Weight
Approx. 410 g (without battery, cassette, memory
card and lens cap)
Approx. 490 g (incl. battery, cassette, memory card
and lens cap)
Operating temperature
For Connectors
S
S-Video output:
Y: 1.0 V (p-p), 75 Ω, analogue
C: 0.29 V (p-p), 75 Ω, analogue
AV
Video output: 1.0 V (p-p), 75 Ω, analogue
Audio output: 300 mV (rms), 1 kΩ, analogue, stereo
Microphone input
ø3.5 mm, stereo
DV
Output: 4-pin, IEEE1394 compliant
USB
Mini USB-B type, USB 1.1/2.0* compliant
0°C to 40°C
Operating humidity
35% to 80%
Storage temperature
–20°C to 50°C
Pickup
1/4.5" CCD
Lens
F 1.2, f = 3.0 mm to 45 mm, 15:1 power zoom lens
Filter diameter
ø30.5 mm
LCD monitor
*
Supports at the maximum of Full-Speed (12 Mbps)
when using USB Mass Storage Class driver.
2.5" diagonally measured, LCD panel/TFT active
matrix system
Viewfinder
AC Adapter
Electronic viewfinder with 0.16" colour LCD
Speaker
Monaural
LED Light
Power requirement
AC 110 V to 240 Vd, 50 Hz/60 Hz
Output
DC 11 V G, 1 A
Effective distance: 1.5 m
Specifications shown are for SP mode unless
otherwise indicated. E & O.E. Design and
specifications subject to change without notice.
For Digital Video Camera
Format
DV format (SD mode)
Signal format
PAL standard
Recording/Playback format
Video: Digital component recording
Audio: PCM digital recording, 32 kHz 4-channel
(12-BIT), 48 kHz 2-channel (16-BIT)
Cassette
Mini DV cassette
Tape speed
SP: 18.8 mm/s, LP: 12.5 mm/s
Maximum recording time (using 80 min.
cassette)
SP: 80 min., LP: 120 min.
Download from Www.Somanuals.com. All Manuals Search And Download.
TERMS
EN
66
A
AC Adapter ....................................................15 Picture Quality ................................................41
Animation .......................................................39 Playback Sound .............................................41
Audio Dubbing ...............................................55 Playback Special Effects ................................27
B
Q
Battery Pack .......................................13, 15, 62
Beep ...............................................................39 Quick Review .................................................21
C
Recording Capacity
Connection To A Personal Computer ............54 Recording Media Selection ............................41
Connections To A TV Or VCR .......................23 Remote Control ..............................................25
D
Date/Time Settings ........................................16 Self Recording ...............................................20
Deleting Files .................................................34 Slow-Motion Playback ....................................26
Demonstration Mode ......................................40 Snapshot Mode ..............................................38
Digital Image Stabilisation (DIS) ....................39 Sound Mode .............................................38, 41
DPOF Setting
Speaker Volume ............................................22
(Digital Print Order Format) ...............35, 36 Specifications .................................................65
Dubbing ..............................................33, 52, 53 Spot Exposure Control ...................................46
E
E-Mail Clip Recording ....................................32 Tape Speed (REC MODE) .......................38, 42
Exposure Control ...........................................45 Telephoto Setting ...........................................39
Troubleshooting .............................................57
I
Image Size .....................................................41
Initialising A Memory Card .............................36
Insert Editing ..................................................56
W
Iris Lock ..........................................................46 Warning Indications .......................................59
White Balance ................................................47
Wide Mode .....................................................39
Wipe Or Fader Effects ...................................48
L
LCD Monitor and Viewfinder ....................16, 19
LED Light .......................................................43
Live Slow ........................................................43
Z
Loading A Cassette ........................................17 Zooming .............................................20, 27, 38
Loading A Memory Card ................................18
M
5-Second Recording ......................................43
Manual Focus ................................................45
Memory Card ...........................................18, 63
Motor Drive Mode ..........................................44
N
Navigation ................................................38, 49
Night-Scope ...................................................44
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Printed in Malaysia
0205FOH-ID-VM
EK/EX
© 2005 Victor Company of Japan, Limited
Download from Www.Somanuals.com. All Manuals Search And Download.
|