JVC DVR DR DX5SEK User Manual

Mini DV & HDD & DVD VIDEO RECORDER  
DR-DX5SEK  
CABLE/SAT  
TV  
DVD  
STANDBY/ON  
TV/CBL/SA  
DVD  
TV  
TV AV  
T
VIDEO  
DV  
HDD  
DVD  
TV  
PR  
CANCEL  
LIVE  
AUX  
MEMO/MARK  
DUBBING  
EDIT PROGRAMME  
NAVIGATION  
TOP MENU  
MENU  
ENTER  
RETURN  
PREVIOUS  
SLOW  
NEXT  
SLOW  
PLAY/SELECT  
CLEAR  
REC  
STOP/  
PAUSE  
JUMP  
REC MODE  
REMAIN  
DISPLAY  
ON SCREEN  
SET UP  
RAM/RW  
I
INSTRUCTIONS  
EN  
LPT1101-001B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY FIRST  
EN  
3
The STANDBY/ON A button does not completely shut off  
mains power from the unit, but switches operating current on and  
off. ABB shows electrical power standby and ACB shows ON.  
ATTENTION:  
8
8
8
Using a mobile phone in the vicinity of the unit may cause  
picture vibration on the TV screen or change the screen to a  
blue back display.  
Some TVs or other appliances generate strong magnetic  
fields. Do not place such appliances on top of the unit as it  
may cause picture disturbance.  
When moving the product, press A to turn off the power,  
and wait at least 30 seconds before unplugging the power  
cord. Then, wait at least 2 minutes before moving the  
product.  
If there is a power outage when using the unit, the recorded  
data may be erased.  
It is recommended to back up discs which contain important  
recordings periodically (every few years). As digital signals  
do not deteriorate, failure to play back or record might arise  
due to the effects of the disc aging through the years  
depending on the storage environment.  
When the equipment is installed in a cabinet or a shelf, make sure  
that it has sufficient space on all sides to allow for ventilation (10  
cm or more on both sides, on top and at the rear).  
When discarding batteries, environmental problems must be  
considered and the local rules or laws governing the disposal of  
these batteries must be followed strictly.  
8
8
Failure to heed the following precautions may result in  
damage to the unit, remote control or disc.  
1. DO NOT place the unit ^  
^
in an environment prone to extreme temperatures or humidity.  
^ in direct sunlight.  
^ in a dusty environment.  
8
Recorded programmes and data cannot be restored once  
the disc or tape is damaged.  
^
^
in an environment where strong magnetic fields are generated.  
on a surface that is unstable or subject to vibration.  
2. DO NOT block the unit’s ventilation openings or holes.  
(If the ventilation openings or holes are blocked by a newspaper  
or cloth, etc., the heat may not be able to get out.)  
3. DO NOT place heavy objects on the unit or remote control.  
4. DO NOT place anything which might spill on top of the unit  
or remote control.  
(If water or liquid is allowed to enter this equipment, fire or  
electric shock may be caused.)  
5. DO NOT expose the apparatus to dripping or splashing.  
6. DO NOT use this equipment in a bathroom or places with  
water. Also DO NOT place any containers filled with water or  
liquids (such as cosmetics or medicines, flower vases, potted  
plants, cups, etc.) on top of this unit.  
IMPORTANT  
Connection to the mains supply in the United Kingdom.  
DO NOT cut off the mains plug from this equipment.  
If the plug fitted is not suitable for the power points in your home  
or the cable is too short to reach a power point, then obtain a  
proper safety approved extension lead/adapter or consult your  
dealer.  
In the unlikely event of the plug fuse failing be sure to  
replace the fuse only with an identical approved type, as  
originally fitted, and to replace the fuse cover. If the fuse  
fails again consult your nearest JVC dealer.  
If nonetheless the mains plug is cut off remove the fuse and  
dispose of the plug immediately, to avoid a possible shock  
hazard by inadvertent connection to the mains supply.  
If this product is not supplied fitted with a mains plug then follow  
the instructions given below:  
7. DO NOT place any naked flame sources, such as lighted  
candles, on the apparatus.  
8. AVOID violent shocks to the unit during transport.  
MOISTURE CONDENSATION  
DO NOT make any connection to the Larger Terminal coded E or  
Green.  
The wires in the mains lead are coloured in accordance with the  
following code:  
Moisture in the air will condense on the unit when you move it from  
a cold place to a warm place, or under extremely humid  
conditions^just as water droplets form on the surface of a glass  
filled with cold liquid. In conditions where condensation may occur,  
disconnect the unit’s power plug from the wall and keep it  
disconnected for a few hours to let the moisture dry, then turn on  
the unit.  
Blue to N (Neutral) or Black  
Brown to L (Live) or Red  
DISCLAIMER OF LIABILITY  
If these colours do not correspond with the terminal  
identifications of your plug, connect as follows:  
Blue wire to terminal coded N (Neutral) or coloured Black.  
Brown wire to terminal coded L (Live) or coloured Red.  
If in doubt — consult a competent electrician.  
JVC shall not be liable for any loss relating to the unit’s failure to  
properly record, store or playback any content (video, audio or  
otherwise) for any reason whatsoever. Any applicable warranties  
shall only cover replacement or repair of the effected unit, and shall  
not apply to recovery or replacement of lost content.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY FIRST  
4
EN  
Some Do’s And Don’ts On The Safe Use Of Equipment  
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment,  
care must be taken if you are to obtain the best results and safety is to be assured.  
DO read the operating instructions before you attempt to use the equipment.  
DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment)  
are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or  
changing connections.  
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.  
DO be careful with glass panels or doors on equipment.  
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way^switch off,  
withdraw the mains plug and consult your dealer.  
DON’T remove any fixed cover as this may expose dangerous voltages.  
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has  
a standby mode. Switch off using the switch on the equipment and make sure that your family knows how to do this. Special  
arrangements may need to be made for infirm or handicapped people.  
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of road safety. It is illegal to  
watch television whilst driving.  
DON’T listen to headphones at high volume, as such use can permanently damage your hearing.  
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten  
the life of the equipment.  
DON’T use makeshift stands and NEVER fix legs with wood screws^to ensure complete safety always fit the manufacturer’s approved  
stand or legs with the fixings provided according to the instructions.  
DON’T allow electrical equipment to be exposed to rain or moisture.  
ABOVE ALL...  
^ NEVER let anyone especially children push anything into holes, slots or any other opening in the case^this could result in a fatal  
electrical shock;  
^ NEVER guess or take chances with electrical equipment of any kind^it is better to be safe than sorry!  
Information for Users on Disposal of Old Equipment  
[European Union]  
This symbol indicates that the electrical and electronic equipment should not be disposed as general  
household waste at its end-of-life. Instead, the product should be handed over to the applicable collection  
point for the recycling of electrical and electronic equipment for proper treatment, recovery and recycling in  
accordance with your national legislation.  
By disposing of this product correctly, you will help to conserve natural resources and will help prevent  
potential negative effects on the environment and human health which could otherwise be caused by  
inappropriate waste handling of this product. For more information about collection point and recycling of this  
product, please contact your local municipal office, your household waste disposal service or the shop where  
you purchased the product.  
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.  
ATTENTION:  
This symbol is only valid  
(Business users)  
in the European Union.  
about the take-back of the product.  
[Other Countries outside the European Union]  
If you wish to dispose of this product, please do so in accordance with applicable national legislation or other  
rules in your country for the treatment of old electrical and electronic equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SAFETY FIRST  
Some Do’s And Don’ts On The Safe Use Of Equipment ...............4  
DISC INFORMATION  
6
About Discs....................................................................................6  
INDEX  
11  
EDITING  
Edit From A Camcorder............................................................... 62  
Digital Audio Dubbing.................................................................. 65  
Remote Control Functions........................................................... 68  
Basic Playback.............................................................................24  
SYSTEM CONNECTIONS  
70  
Tuner Set..................................................................................... 74  
Format A Disc (DVD Deck Only) ................................................. 78  
Scan Mode Set (HDD & DVD Deck Only) ................................... 80  
Basic Playback.............................................................................39  
APPENDIX  
85  
90  
91  
TIMER RECORDING ON HDD/DVD DECK  
46  
SPECIFICATIONS  
LIST OF TERMS  
VIDEO Plus+ Timer Programming...............................................46  
Manual Timer Programming.........................................................48  
Automatic Satellite Programme Recording  
(HDD Deck Only).......................................................................50  
HOW TO USE THIS INSTRUCTION MANUAL  
All major sections and subsections are listed in the Table Of Contents on page 5. Use this when searching for information on a specific  
procedure or feature.  
The Index on pages 11 – 14 illustrates the controls and connections on the front and rear panel, the front display panel and the remote  
control.  
The list of terms on page 91 lists frequently-used terms, and the number of the page on which they are used or explained in the manual.  
The A mark signals a reference to another page for instructions or related information.  
Operation buttons necessary for the various procedures are clearly indicated through the use of illustrations at the beginning of each  
major section.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DISC INFORMATION  
6
EN  
DVD-R/RW Discs  
It is only possible to use DVD-R discs which conform with DVD-R  
standard Version 2.0.  
About Discs  
When a DVD-R/RW disc (Video mode) is finalised (A pg. 79), it  
can be played back on a standard DVD player as a DVD VIDEO  
disc.  
When a DVD-RW disc (VR mode) is finalised (A pg. 79), it can be  
played back on a standard DVD player compatible with the VR  
mode of DVD-RW discs.  
Recordable/Playable Discs  
You can use discs with the following logos for recording and  
playback.  
Before finalising ^  
^ it is possible to record on unrecorded areas of the disc, edit the  
disc title and programme titles, and delete programmes.  
It is impossible to record or edit DVD-R/RW discs recorded on  
other devices even if they have not been finalised.  
It is impossible to overwrite recorded areas of DVD-R discs.  
Available recording capacity does not increase even if a recorded  
programme is deleted from a DVD-R disc.  
DVD-RAM  
DVD-RW  
12 cm: 4.7 GB/9.4 GB  
8 cm: 1.4 GB/2.8 GB  
Ver. 2.0/2x speed  
Ver. 2.1/1x – 3x speed  
Ver. 2.2/5x speed  
12 cm: 4.7 GB/9.4 GB  
Ver. 1.1/1x – 2x speed  
(Video mode/VR mode)  
Ver. 1.2/4x speed  
After finalising ^  
(Video mode/VR mode)  
After a DVD-R/RW disc (Video mode) has been finalised, it is  
possible to play back the recorded programmes (video and/or  
audio) on a standard DVD video player as a DVD VIDEO disc.  
Edited titles are displayed as the  
ADVD menuB in video mode.  
It is impossible to record, edit or  
delete the data either in video  
mode or in VR mode.  
Either in video mode or in VR  
mode, although the disc can be  
played back on DVD players from  
other manufacturers, sometimes it  
HOME MOVIES  
DOCUMENTARIES  
TRAVELLING CLIPS  
DVD-R  
12 cm: 4.7 GB  
8 cm: 1.4 GB  
MTV  
CARTOON  
Ver. 2.0/1x – 4x/8x speed  
(Video mode)  
The above table is based on the information as of August 2005.  
Recording and playback may not be performed depending on the  
characteristics and condition of the disc used, leading to  
unsatisfactory results. Using discs manufactured by JVC is  
recommended since they have been tested to be compatible with  
this unit.  
may not be possible to play back depending on the disc and  
recording conditions.  
It is impossible to record on CD-R/RW or DVD-R discs used for  
authoring.  
It is impossible to record onto DVD-R/RW (Video mode) discs  
broadcasts that allow you to copy once. The copy once  
programmes can only be recorded onto DVD-RW discs formatted  
in VR mode.  
DVD-RAM Discs  
It is only possible to use discs which conform with DVD-RAM  
standard Version 2.0 or 2.1.  
NOTES:  
The following may result if you play back a DVD-R disc recorded  
on another unit.  
It is impossible to record on DVD-RAM discs which do not  
conform to this standard. If you use a disc formatted under a  
different standard version, format it on this unit before use.  
It may not be possible to record, play back, edit or dub a  
DVD-RAM disc even if it conforms to the standard if it was  
recorded or edited on the devices from other manufacturers or on  
a PC, or if it has far too many titles, or if there is very little  
available capacity remaining on the disc.  
The disc does not play.  
A mosaic pattern (block noise) appears on the screen.  
Video or audio may be dropped out.  
The unit stops during playback.  
6x speed DVD-RW disc cannot be used on this unit.  
DVD-RAM discs recorded on this unit cannot be played back on  
an incompatible DVD player.  
It is possible to record copy-once programmes of digital  
broadcasts only onto 4.7/9.4 GB DVD-RAM discs (2.8 GB  
DVD-RAM discs are not compatible).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
DISC INFORMATION  
EN  
7
Discs For Playback Only  
Unplayable Discs  
The following types of discs cannot be played using this unit.  
Do not attempt to play back any kind of disc that is damaged  
(cracked, warped, or repaired with adhesive tape) or discs in  
You can use discs with the following logos for playback only.  
DVD VIDEO  
Video CD/Super Video CD  
unusual shapes (heart-shaped, octagonal, or other forms). If such  
discs are accidentally played back, it may cause noise that can  
lead to speaker damage.  
CD-ROM discs (including PHOTO-CD and CD-G)  
Discs recorded in Packet Write (UDF) format  
1.3-GB double density CDs (DDCD)  
(example of region code  
indications)  
High density CDs (HDCD)  
The following discs also cannot be played back.  
Discs of a region number other than A2B  
DVD-RAM (2.6 GB/5.2 GB)  
DVD-RAM (TYPE1)  
Audio CD  
CD-DA files  
CD-R  
CD-DA/JPEG/  
MP3/WMA files  
Caution for DualDisc playback  
The Non-DVD side of a ADualDiscB does not comply with the  
ACompact Disc Digital AudioB standard. Therefore, the use of Non-  
DVD side of a DualDisc on this product may not be recommended.  
CD-ROM  
JPEG/MP3/  
WMA files  
CD-RW  
Region Number  
CD-DA/JPEG/  
MP3/WMA files  
The world is divided into 6 regions for DVD VIDEO discs.  
DVD VIDEO discs are assigned a region number to indicate which  
region they may be played back in. A disc cannot be played back  
on this unit unless the region number of the disc matches that of  
the unit. The region number for this unit is A2B. Only discs whose  
region number includes A2B or AALLB can be played back such as  
shown below.  
Playback may not be performed depending on the characteristics  
and condition of the disc used.  
DTS Audio CDs can also be played back (An optional DTS  
decoder is required).  
MP3 and JPEG discs can be played back on this unit only when  
they have been recorded in the ISO9660 or Joliet format and  
finalised.  
Examples of DVD VIDEO labels which can be played back  
using this unit.  
JPEG files that can be played back on this unit must conform to  
JFIF/Baseline process, and the maximum resolution of a JPEG  
file is 2,812 pixels in width and 2,112 pixels in height.  
CD-R/RW discs recorded in music CD format need to be finalised  
to play back on this unit.  
Operation and audio quality of this unit are not guaranteed for  
discs that do not conform to the Compact Disc specification  
(CD-DA).  
Before you play back a CD, check for the CD logo and read the  
notes on the package to confirm that it conforms to the Compact  
Disc specification.  
Depending on the intentions of the author of the software,  
recording conditions of DVD discs and Video CD/SVCD discs  
may be restricted. Since this unit plays back discs according to  
the intentions of the author of the software as indicated on the  
disc, some functions may not operate as commanded.  
When switching from the first layer to the second layer of double-  
layered DVD VIDEO discs, the image and sound may be  
momentarily distorted. This is not a malfunction.  
DVD-AUDIO discs compatible with DVD video players can be  
played.  
Marks of discs in this instruction manual  
Allows operation with a  
DVD-RAM disc.  
Allows operation with a  
Video CD/Super Video  
CD (SVCD) disc.  
Allows operation with a  
DVD-R disc.  
Allows operation with  
an Audio CD disc.  
Allows operation with a  
DVD-RW disc.  
Allows operation with a  
disc including MP3  
files.  
Allows operation with a  
DVD VIDEO disc.  
Allows operation with a  
disc including JPEG  
files.  
Super Audio CDs (SACD) compatible with conventional CD  
players can be played.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
DISC INFORMATION  
8
EN  
Audio CD/Video CD/SVCD  
Recording Medium And Format  
DVD-RAM  
Recording and erasing can be performed as many times as  
possible on a disc.  
Editing can be performed after recording, such as deleting  
unwanted parts.  
While recording, it is possible not only to start playback of a  
programme currently being recorded, but also to watch another  
programme previously recorded.  
Typically, Audio CD discs are divided into separate tracks each  
containing one song. Each track is assigned a number. For  
example, the third track is Track 3. The same is true for Video CD/  
SVCD discs.  
However, some discs are not divided into tracks.  
Audio CD or Video CD/SVCD  
Track 1  
Track 2  
Track 3  
Track 4  
DVD-RW (VR mode)  
Recording and erasing can be performed as many times as  
possible on a disc.  
Editing can be performed after recording, such as deleting  
unwanted parts.  
JPEG/MP3 Disc (CD-R/RW/ROM)  
MP3/JPEG files put in directories nested in several levels on a disc  
will be organized as if they were put in single level directories  
(groups) by the MP3/JPEG Navigation of this unit. (A pg. 57)  
File structure of a disc before starting the MP3/JPEG  
Navigation  
DVD-RW (Video mode)  
Can be played back on other DVD players.  
New recording can be performed by erasing all the data on a disc  
once played back.  
DVD-R  
Can be played back on other DVD players.  
Suitable when keeping a recorded disc for a long time.  
File Structure Of Discs  
DVD VIDEO  
Typically, DVD VIDEO discs are made up of larger units called  
AtitlesB. Each title has a number (title number) that can be used to  
select desired titles. Titles are further divided into units called  
AchaptersB. Each chapter has a number (chapter number) that can  
also be used to select desired chapters. Note that some discs are  
not divided into titles and chapters.  
Directory  
MP3 file  
JPEG file  
File structure of the disc after starting the MP3/JPEG  
Navigation  
Files are automatically grouped as follows and displayed on the  
MP3/JPEG Navigation screen. Data is displayed in the  
alphabetical order of file name. Files are grouped based on roots.  
When you record a programme on a DVD-RAM/RW (VR mode)  
disc  
A single recording session results in a single title (a single  
chapter). However, chapter marks are automatically inserted when  
recording is paused, or audio changes from monaural to stereo  
due to commercial breaks, etc. It is also possible to insert chapter  
marks at desired locations during playback. (A pg. 27)  
When you record a programme on a DVD-R/RW (Video mode)  
disc  
A single recording session results in a single title (a single  
chapter). However, chapter marks are automatically inserted when  
recording is paused, or audio changes due to commercial breaks,  
etc. It is also possible to insert chapter marks at desired locations  
during either recording or playback. Once the disc has been  
finalised, these chapter marks are deleted and new chapter marks  
are assigned automatically approximately every 5 minutes.  
DVD-RAM, DVD-RW, DVD-R or DVD VIDEO disc  
This unit can recognise up to 9 hierarchies including directories  
Title 1  
Title 2  
and files.  
Also, it can recognise up to 250 files in each group, and up to 99  
groups on a disc.  
Chapter 1 Chapter 2 Chapter 3  
Chapter 1 Chapter 2 Chapter 3  
NOTES:  
In Video mode, even before finalising, it is impossible to perform  
editing operations other than changing the disc name and/or title  
names and deleting programmes and/or titles.  
Video CD/SVCD discs that support Playback Control (PBC)  
The contents of a disc are recorded into several hierarchies, and  
played back according to the instructions on the screen while  
navigating through the hierarchies. It is also possible to playback  
recorded tracks consecutively without activating the PBC function  
even when playing a PBC-compatible disc. (A pg. 28)  
Regarding the contents recorded on discs  
Some files may not be played back depending on the file types  
and other factors.  
After finalising, it is impossible to perform editing operations.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
DISC INFORMATION  
EN  
9
DVD VIDEO Marks  
Placing A Disc  
Sometimes marks are printed on a DVD disc and/or on its  
packaging to indicate information regarding the contents and  
functions of the disc. Check the marks indicating the contents and  
functions of the disc. Note, however, that in some cases a disc may  
not include a mark even for a function it supports.  
Opening the disc tray  
Press M to open the disc tray.  
Marks related to video  
Number of subtitles  
Number of angles  
DV/HDD/DVD  
SELECT  
DVD  
DV IN/ OUT  
DV  
INSERT  
A.DUB  
REC MODE  
Recorded under the  
standard 4:3 aspect  
ratio  
Screen includes black  
bands at the top and  
the bottom of image  
which has a standard  
4:3 aspect ratio (letter  
box)  
Pressing the button again closes the disc tray.  
Use the button to open and close the disc tray.  
Do not block the disc tray with your hand while it is opening or  
closing as this may result in hardware failure.  
Do not place unplayable discs or any object other than a disc on  
the disc tray.  
Do not press down strongly on the disc tray or place any heavy  
objects on it.  
Video playback is in Wide video mode (16:9) on  
wide televisions, but in letter box on televisions  
with standard 4:3 aspect ratio.  
Video playback is in Wide video mode (16:9) on  
wide televisions, but pan and scan is used on  
televisions with standard 4:3 aspect ratio (either  
the left or right side of the image is cut-out).  
Discs without cartridges  
Marks related to audio  
Number of audio tracks  
Disc tray  
Dolby Digital mark  
It has been developed by Dolby Laboratories as  
a digital surround system.  
Place the disc on the disc tray with the label side facing up. Since  
disc size changes depending on the disc to be played back, be  
sure to correctly align the disc with the grooves for its size. If the  
disc is not in its groove, it may be scratched or otherwise damaged.  
To insert an 8 cm disc, place it according to the inner groove.  
DTS (Digital Theater Systems)  
You can enjoy DTS audio if you connect an  
amplifier with a built-in DTS decoder to the  
DIGITAL OUT connector of the unit.  
DVD-RAM discs contained in cartridges  
Double-sided discs:  
Remove the disc from the cartridge. Align the disc with the grooves  
on the disc tray as shown in the illustration and insert with the side  
you wish to play back or record facing down. If you insert the disc  
with ASide AB facing down, programmes are recorded on the side  
A.  
Single-sided discs:  
Remove the disc from the cartridge. Align the disc with the grooves  
on the disc tray as shown in the illustration and insert with the label  
side facing up.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
DISC INFORMATION  
EN  
10  
Care And Handling Of Discs  
How to handle discs  
When handling a disc, do not  
touch the surface of the disc.  
Since discs are made of  
plastic, they are easily  
damaged. If a disc gets dirty,  
dusty, scratched or warped, the  
images and sound will not be  
picked up correctly, and such a  
disc may cause the unit to malfunction.  
Label side  
Do not damage the label side, stick paper to or use any adhesives  
on its surface.  
Recording side  
Make sure that discs are not scratched or dirty on the recording  
side before use. Scratches and dirt on the recording side of a disc  
may hinder proper playback and recording. Also be careful that a  
DVD-RAM disc may get scratched or dirty when removed from  
cartridge then put back in after use.  
Storage  
Make sure that discs are kept in their cases. If discs are piled on  
top of one another without their protective cases, they can be  
damaged. Do not put discs in a location where they may be  
exposed to direct sunlight, or in a place where the humidity or  
temperature is high. Avoid leaving discs in your car!  
Maintenance of discs  
If there are fingerprints or other dirt adhering  
to a disc, wipe with a soft dry cloth, moving  
from the centre outwards.  
If a disc is difficult to clean, wipe with a cloth  
moistened with water. Never use record  
cleaners, petrol, alcohol or any anti-static  
agents.  
CAUTION:  
Sometimes during playback, noise may appear or images may  
be garbled. This is sometimes due to the disc. (It may not be up  
to industry standards.)  
These symptoms are caused by the discs, not by the malfunction  
of the unit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
INDEX  
EN  
11  
Front View  
D
A
B
C
E
F G H I J  
DV/HDD/DVD  
SELECT  
STANDBY/ ON  
S-VIDEO  
DV  
HDD  
DVD  
VIDEO (MONO)L–AUDIO–R  
DV IN/ OUT  
DV  
PR  
INSERT  
A.DUB  
REC MODE  
F–1  
KL  
N
O
P Q R S T V W X  
U
A Eject Button (M) (DV) A pg. 41  
B Mini DV Cassette Loading Slot  
K STANDBY/ON Button (A)  
L S-video Input Connector [S-VIDEO] A pg. 62  
M Video/Audio Input Connectors  
DV Recording Lamp (R)  
[VIDEO/AUDIO ((MONO) L/R)] A pg. 62  
N Programme Buttons (PR +/–) A pg. 34, 37  
O Front Display Panel A pg. 13  
D HDD Lamp (HDD) A pg. 37  
HDD Recording Lamp (R) A pg. 37  
E Open/Close Button (M) (DVD) A pg. 9  
P DVD Lamp (DVD) A pg. 22, 24  
F DV/HDD/DVD Select Button (DV/HDD/DVD SELECT)  
A pg. 24, 37, 41  
DVD Recording Lamp (R) A pg. 34  
Q Infrared Beam Receiving Window  
R Insert Button (INSERT) A pg. 67  
S Audio Dubbing Button (A.DUB) A pg. 66  
T Recording Mode Button (REC MODE) A pg. 34, 37  
U Play Button (I) A pg. 24, 39  
This button will not function during navigation mode or set up  
mode.  
G Stop Button (o) A pg. 24, 39  
H Disc Tray  
I Reverse Search Button (O) (HDD & DVD deck) A pg. 25,  
V Record Button (R) A pg. 34, 37  
W Pause Button (W) A pg. 24, 39  
44  
Rewind Button (O) (DV deck) A pg. 41, 42  
J Forward Search Button (N) (HDD & DVD deck) A pg. 25,  
44  
X DV Input/Output Connector [DV IN/OUT(A*)] A pg. 61  
[DV OUT] is available for DV deck only.  
* A (i.Link) refers to the IEEE1394-1995 industry specification and  
extensions thereof. The A logo is used for products compliant with the  
i.Link standard.  
Fast Forward Button (N) (DV deck) A pg. 41, 42  
To access covered connectors, pull  
and open the cover.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
INDEX  
EN  
12  
Rear View  
H
A
B
C
D
E
F
G
DIGITAL  
AUDIO OUT  
ANTENNA  
IN  
AUDIO OUT  
COMPONENT  
VIDEO OUT  
PCM/STREAM  
COAXIAL  
Y
S-VIDEO OUT  
RIGHT  
LEFT  
P
B
OUT  
OPTICAL  
PR  
IN/OUT  
IN/DECODER  
HDD/DVD  
HDD/DVD  
L-2  
L-1  
I
J
K
A Region Number A pg. 7  
B AC Power Cord A pg. 18  
C Cooling Fan  
This prevents the temperature from rising inside the unit.  
Do not remove it.  
The unit may become hot when it is turned off, as the cooling  
fan on the rear of the unit is not activated. However, the cooling  
fan may be activated in the following cases;  
^ In the Automatic Satellite Programme Recording standby  
mode (A pg. 50), slightly before the starting time of VPS/PDC  
recording (A pg. 47).  
D Digital Audio Output Connectors  
[DIGITAL AUDIO OUT (OPTICAL/COAXIAL)] (HDD & DVD  
deck only) A pg. 65, 70  
E S-video Output Connector [S-VIDEO OUT] A pg. 18  
F Audio Output Connectors [AUDIO OUT (LEFT/RIGHT)]  
A pg. 18  
G Component Video Output Connectors [COMPONENT  
VIDEO OUT (Y/PB/PR)] (HDD & DVD deck only) A pg. 18  
H Antenna Input Connector [ANTENNA IN] A pg. 18  
I L-1 Input/Output Connector [L-1 IN/OUT] A pg. 18, 63, 70  
J L-2 Input/Decoder* Connector [L-2 IN/DECODER] A pg. 63,  
70  
* The decoder function of this unit is not available in the U.K.  
K Antenna Output Connector [ANTENNA OUT] A pg. 18  
^ If you connect the decoder or satellite receiver to [L-2 IN/  
DECODER], and if AL-2 SELECTB is set to ADECODERB, ASAT  
VIDEOB or ASAT S-VIDEOB. (A pg. 64)  
^ When AJUST CLOCKB is set to AONB. (A pg. 77)  
(Set AJUST CLOCKB to AOFFB if you mind the noise of the fan.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX  
EN  
13  
Front Display Panel  
A B  
C
D
E
F
G
H
I
J
K
L
M
VPS/PDC  
LPCM  
FR  
XP SP LP EP  
VR + RW VCD  
-
N O  
P
Q
R
S
T
U
A VIDEO Indicator (z) A pg. 35, 38  
K Random/Programme Playback Mode Indicator (RND/  
PRGM) A pg. 32  
ARNDB: Lights when Random Playback mode is set.  
APRGMB:Lights when Programme Playback mode is set.  
L Repeat Mode Indicator (x/1/A-B) A pg. 29  
Select Repeat Playback mode on the on-screen bar.  
VIDEO. Lights off when TV mode is selected.  
B Disc Type Indicator  
When a disc is loaded, the type of the disc is indicated.  
Disc Status Indicator  
When a disc is running, the disc marks rotate.  
VR Mode Indicator (VR) A pg. 78  
AxB:  
Ax1B:  
Whole disc is played back repeatedly.  
A single title/chapter/track is played back  
repeatedly.  
Lights when a DVD-RW disc is formatted in VR mode.  
C VPS/PDC Indicator A pg. 47  
Appears when checking if the station being received transmits a  
VPS/PDC signal.  
D Linear PCM Indicator (LPCM)  
Lights when AXP MODE REC AUDIOB is set to ALINEAR PCMB  
(A pg. 72) for recording with HDD, DVD-RAM, DVD-R and  
DVD-RW discs, and when Linear PCM audio is played.  
E Cassette Loaded Mark (u)  
AxA-BB: The selected part (A-B) is played back repeatedly.  
No display: Repeat Playback mode is off.  
M VPS/PDC Recording Indicator A pg. 47  
Lights when VPS/PDC recording function is activated.  
N Video Output Indicator (q) A pg. 80  
No display: Indicates that interlace mode is engaged.  
q:  
Indicates that progressive mode is engaged.  
(Example) q lights when video output mode is in progressive  
mode.  
Indicates the present of a cassette in the DV deck.  
Lights when a cassette is loaded into the DV deck. It will remain  
lit as long as the cassette is loaded, even if the HDD or DVD  
deck is being selected.  
O Automatic Satellite Programme Recording Indicator  
A pg. 50  
Lights when the HDD deck is in the Auto Satellite Programme  
Recording standby mode.  
F Recording Mode Indicator (XP/SP/LP/EP/FR) A pg. 34  
Blinks when recording mode is being set.  
P Group/Title Number Display  
While AFRB is blinking, the left 3 digits of the Multi Display (P  
R) indicate setting values ranging from A60B to A480B. After the  
value has been set, only AFRB lights.  
Q Audio Dubbing/Insert Editing Indicator  
AADUBB or AINSB lights up during Audio Dubbing or Insert  
Editing respectively.  
G Group/Title Indicator (GRP/TITLE)  
R Track/Chapter Number Display  
AGRPB or ATITLEB lights depending on a disc loaded while the  
left 2 digits of the Multi Display (P) indicate the numbers  
explained below.  
AGRPB: Total number of groups or group number being played  
back are displayed on the Multi Display.  
ATITLEB: Total number of titles or title number being played  
back are displayed on the Multi Display.  
S Remaining Time/Elapsed Time Indicator A pg. 27, 35  
Lights when remaining time of HDD, DVD-RAM, DVD-R and  
DVD-RW discs is displayed, and lights out when elapsed time is  
displayed.  
The right 6 digits of the Multi Display (T) indicate elapsed or  
remaining time of each track.  
No display: Indicates elapsed time of the disc.  
Displayed: Indicates remaining time of the disc.  
T Remaining Time/Elapsed Time Display A pg. 27, 35  
Time Code Display A pg. 42  
H Channel Indicator  
Indicates the channel received.  
I Track/Chapter Indicator (TRK/CHAP)  
ATRKB or ACHAPB lights depending on a disc loaded while the  
3rd and 4th digits from the left of the Multi Display (R) indicate  
the numbers explained below.  
U Multi Display  
Displays clock, received channel, elapsed time, and remaining  
time.  
ATRKB: Total number of tracks or track number being played  
back are displayed on the Multi Display.  
Also displays status of the unit (NO DISC/OPEN/CLOSE/  
READING).  
ACHAPB: Chapter number being played back are displayed on  
the Multi Display.  
J Simulated Surround Effect Indicator (3D) A pg. 31  
Lights when a simulated surround effect is set to A3D-ONB on  
the on-screen bar.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
INDEX  
EN  
14  
S VPS/PDC Recording Button (VPS/PDC j) A pg. 47  
T Audio Button (AUDIO) A pg. 28  
Remote Control  
U Subtitle Button (SUBTITLE) A pg. 28  
V TV/CABLE/SAT/DVD switch A pg. 22, 68, 69  
W DVD STANDBY/ON Button (DVD A)  
X TV/CBL/SAT STANDBY/ON Button (TV/CBL/SAT A)  
A pg. 68  
CABLE/SAT  
TV DVD  
V
W
A
STANDBY/ON  
DVD  
TV AV  
TV/CBL/SAT  
TV  
Y DVD Button* A pg. 24  
B
C
D
VIDEO  
X
Y
* This button will not function during navigation mode or set up mode.  
Z TV Volume Buttons (TV8 +/–) A pg. 68  
a Programme Buttons (PR +/–) A pg. 34, 68  
b Memo Button (MEMO) A pg. 52, 55  
Mark Button (MARK) A pg. 27  
c Programming Button (PROGRAMME) A pg. 46, 48, 49  
d Edit Button (EDIT) A pg. 52  
DV  
HDD  
DVD  
TV  
Z
E
PR  
e Navigation Button (NAVIGATION) A pg. 51, 57  
f Enter Button (ENTER) A pg. 19  
g Return Button (RETURN) A pg. 28, 30, 46  
h Forward Skip Button (T) A pg. 25, 44  
Next Button (NEXT) A pg. 28  
i Forward Search Button (N) (HDD & DVD deck) A pg. 25,  
44  
a
b
CANCEL  
LIVE  
AUX  
MEMO/MARK  
F
G
H
I
J
K
DUBBING  
EDIT PROGRAMME  
NAVIGATION  
c
d
Fast Forward Button (N) (DV deck) A pg. 41  
Forward Slow Button (SLOW +) A pg. 25  
j Play Button (I) A pg. 24, 39  
TOP MENU  
MENU  
e
Select Button (SELECT) A pg. 57  
ENTER  
k Pause Button (W) A pg. 24, 39  
f
g
h
RETURN  
l Stop Button (o) A pg. 24, 39  
L
Clear Button (CLEAR) A pg. 32  
m Skip Search Button (v) A pg. 26, 39, 42, 44  
n Set Up Button (SET UP) A pg. 22, 71  
o One Touch Replay Button (w) A pg. 26, 40, 42, 44, 45  
p On-Screen Button (ON SCREEN) A pg. 16, 29  
q Automatic Satellite Programme Recording Button (SAT j)  
A pg. 50  
PREVIOUS  
SLOW  
NEXT  
SLOW  
M
N
O
P
PLAY/SELECT  
i
j
k
l
m
n
o
CLEAR  
REC  
PAUSE  
STOP/  
r Progressive Scan Button (PROGRESSIVE SCAN) A pg. 80  
s Angle Button (ANGLE) (DVD deck only) A pg. 27  
Live Check Button (LIVE CHECK) A pg. 44  
JUMP  
REC MODE  
REMAIN  
DISPLAY  
ON SCREEN  
SET UP  
Q
R
How To Use  
Before use, insert two AA size batteries into the remote control  
with the polarity (F and G) matched correctly as indicated on  
the battery compartment or on the lid.  
p
VPS/PDC  
SUBTITLE  
SAT  
The remote control can operate most of your unit’s functions, as  
well as basic functions of TV sets and satellite receivers and  
other brands. (A pg. 68)  
Point the remote control toward the receiving window.  
The maximum operating distance of the remote control is  
about 8 m.  
S
q
SCAN  
AUDIO  
ANGLE  
r
s
T
U
NOTE:  
If the remote control doesn’t work properly, remove its batteries,  
wait a short time, replace the batteries and then try again.  
A TV AV/VIDEO Button A pg. 35, 38, 68  
B TV Muting Button (TV d) A pg. 68  
C DV Button* A pg. 41  
* This button will not function during navigation mode or set up mode.  
D HDD Button* A pg. 37  
* This button will not function during navigation mode or set up mode.  
E Number Keys A pg. 34, 37  
F Cancel Button (CANCEL(L)) A pg. 32  
G Auxiliary Button (AUX): Switches the AV source to AL-2B.  
H Live Button (LIVE) A pg. 44  
I Dubbing Button (DUBBING) A pg. 58  
J Top Menu Button (TOP MENU) A pg. 25  
K Selection Keys (FGD E) A pg. 19  
L Menu Button (MENU) A pg. 25  
M Reverse Skip Button (S) A pg. 25, 44, 40  
Previous Button (PREVIOUS) A pg. 28  
N Reverse Search Button (O) (HDD & DVD deck) A pg. 25,  
44  
Rewind Button (O) (DV deck) A pg. 41  
Reverse Slow Button (SLOW –) A pg. 25  
O Record Button (R) A pg. 34, 37  
P Jump Button (JUMP +/–) A pg. 40  
Q Recording Mode Button (REC MODE) A pg. 34, 37  
Remain Button (REMAIN) A pg. 27, 35  
R Display Button (DISPLAY) A pg. 27, 35, 42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
INDEX  
EN  
15  
Check Contents  
CHECK ALL THE CONTENTS SHOWN BELOW  
CABLE/SAT  
TV DVD  
STANDBY/ON  
DVD  
TV AV  
TV/CBL/SAT  
TV  
Video Recorder  
VIDEO  
DV  
HDD  
DVD  
TV  
RAM/RW  
PR  
CANCEL  
LIVE  
AUX  
MEMO/MARK  
DUBBING  
EDIT PROGRAMME  
NAVIGATION  
TOP MENU  
MENU  
ENTER  
RETURN  
PREVIOUS  
SLOW  
NEXT  
SLOW  
PLAY/SELECT  
CLEAR  
REC  
PAUSE  
STOP/  
RF Cable  
AAAB Batteries (x 2)  
JUMP  
REC MODE  
REMAIN  
DISPLAY  
ON SCREEN  
SET UP  
21-pin SCART Cable  
Infrared Remote Control Unit  
I You are now ready to install your unit. (A pg. 18)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX  
EN  
16  
When pressing REC MODE  
On-Screen Display (HDD & DVD deck)  
When ASUPERIMPOSEB is set to AAUTOB and ON SCREEN on the  
remote control is pressed, various operational indicators appear on  
the TV screen. To clear the operational indicators, press  
ON SCREEN twice.  
(Appears for eight seconds.)  
7: 00  
10: 00  
20: 00  
28: 00  
36: 00  
XP  
SP  
LP  
EP  
FR480  
When playing back a recorded title  
HDD  
A Remaining disc time for each recording speed  
B Recording speed  
0:00  
1:00  
2:00 01:16:48  
FR360  
Digital  
When pressing R during recording  
FISHING WORLD  
ITR  
2 : 30  
A Title start  
B Current playback point  
C Title end  
D Elapsed playing time  
E Play mode  
F Name of title currently being played back  
G Time scale (This title is an hour and a half long.)  
H Audio mode  
A Recording time for Instant Timer Recording (ITR) mode  
When using Live Memory playback  
HDD  
11:00  
12:00  
13:00  
11:35  
11:33  
PR.12  
FR360  
DVD  
TITLE99 CHAPTER999 T. REMAIN6:59:59  
Digital  
DVD  
XP  
FISHING WORLD  
TITLE99 CHAPTER999 T. REMAIN6:59:59  
11:35  
11:33  
RAM  
PR.12  
A Playback title number  
B Playback chapter number  
C Disc remaining time  
D Current status (playback)  
E Audio mode  
FR360  
A Time scale for recording (HDD deck)  
Bar meter for recording (DVD deck)  
B Current recording point  
C Recording mode  
D Current time  
F Bar meter  
G Name of title (or play list) currently being played back  
H Current playback point  
I Recorded mode*  
E Current playback channel position number  
* Depending on the recording condition, the recorded mode may not  
always be displayed.  
F Time scale for Live Memory Playback (HDD deck)  
Bar meter for Live Memory Playback (DVD deck)  
G Current playback point  
H Live Memory playback mode  
I Current playback time  
When recording  
HDD  
11:00  
12:00  
13:00  
11:35  
PR.12  
FR360  
LIVE  
DVD  
TITLE99 CHAPTER999 T. REMAIN6:59:59  
11:35  
RAM  
PR.12  
FR360  
LIVE  
A Recording point  
B Current status (recording)  
C Current time  
D Recording channel number  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
INDEX  
EN  
17  
On-Screen Display (DV Dubbing)  
On-Screen Display (DV deck)  
When ASUPERIMPOSEB is set to AAUTOB and ON SCREEN on the  
remote control is pressed, various operational indicators appear on  
the TV screen. To clear the operational indicators, press  
ON SCREEN again.  
When capturing images from the external DV  
equipment  
0:00  
FR360 00:00:00. 00  
12bit  
1:00  
2:00  
DV  
HDD  
GR-DV3500  
00:00:00. 00  
H
DV  
JVC  
GR-DV3500  
SOUND1  
W
S P  
R
u
A
B
-
L
1
G
F
A Recording speed  
1 6 B  
I
T
U S E C L E A N I N G C A S S E T T E  
B HDD capacity graph  
C HDD time counter  
D Recording time scale  
E HDD mode  
C
F Remote control mode  
G Connected DV equipment mode  
W X  
:
0 0  
:
0 0  
:
0 0  
D
E
H Connected DV equipment model information  
I Input channel  
J Sound mode  
K Sound input bit-rate*  
* Indicates the sound bit-rate of the connected DV equipment  
L Connected DV equipment information*  
* Maker name and model name, etc. may not appear depending on the  
connected equipment.  
M Time counter for the connected DV equipment  
N Sound monitor mode  
A Operation Mode Indicators  
B Tape Speed (SP/LP)  
C Sound Mode Display A pg. 72  
D Current Day/Month/Year/Clock Display/Time Code Display  
A pg. 42  
E Audio Mode Display A pg. 42  
F Warning Message  
G Auxiliary Input Indicator (L-1, L-2, F-1 or DV)  
H ACassette LoadedB Mark  
1
2
DV  
DV  
O Remote control switch  
P Auto capture button  
Q Sound monitor switch  
179 :59 :59  
R Elapsed recording time  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLING YOUR NEW UNIT  
EN  
18  
8 S-Video Connection  
To connect to TV’s S-VIDEO input and AUDIO input  
connectors ^  
A Perform A C of ATo connect to a TV with 21-pin SCART  
connector ^B in the left column.  
Basic Connections  
B Connect the unit’s [S-VIDEO OUT] connector to the TV’s  
S-VIDEO input connector.  
TV aerial cable  
C Connect the unit’s [AUDIO OUT] connectors to the TV’s AUDIO  
input connectors.  
Mains outlet  
If your TV is not stereo-capable, use the unit’s [AUDIO OUT]  
Mains power cord  
To [ANTENNA IN]  
Set AL-1 OUTPUTB to ASCART S-VIDEOB when using the S-  
Video connection.  
Back of unit  
8 Component Video Connection  
To connect to TV’s component video input connectors ^  
A Perform A C of ATo connect to a TV with 21-pin SCART  
connector ^B in the left column.  
B Connect the unit’s [COMPONENT VIDEO OUT (Y/PB/PR)]  
connectors to the TV’s component video input connectors.  
C Connect the unit’s [AUDIO OUT] connectors to the TV’s AUDIO  
input connectors.  
You can obtain high-quality component video pictures.  
The [COMPONENT VIDEO OUT (Y/PB/PR)] connectors do not  
output DV signals.  
If your TV is not stereo-capable, use the unit’s [AUDIO OUT]  
connectors to connect to an audio amplifier for Hi-Fi stereo  
sound reproduction.  
To [L-1 IN/OUT]  
To [S-VIDEO  
To OUT]  
[AUDIO  
OUT]  
Audio cable  
(not supplied)  
To  
[ANTENNA  
OUT]  
To  
[COMPONENT  
VIDEO OUT  
(Y/PB/PR)]  
21-pin SCART  
cable  
(supplied)  
Component  
video cable  
(not supplied)  
S-video cable  
(not supplied)  
By using the component video connection, you can view the  
images in the progressive mode. For switching to the  
progressive mode, refer to AScan Mode Set (HDD & DVD Deck  
Only)B (A pg. 80).  
RF cable  
(supplied)  
NOTE:  
Select an appropriate option of AL-1 OUTPUTB as follows  
(A pg. 64):  
TV  
To 75 ohm  
terminal  
When your TV’s SCART  
Set AL-1 OUTPUTB to:  
connector accepts:  
It’s essential that your unit be properly connected.  
Composite signals  
ASCART VIDEOB  
ATTENTION:  
Y/C signal (separated  
luminance (brightness) and  
chrominance (colour) signals)  
Connect the AC plug only after all connections to the TV has  
been completed.  
ASCART S-VIDEOB  
RGB signal  
ASCART RGBB  
ACOMPONENTB  
THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO  
OPERATION CAN BE PERFORMED.  
Component video signal  
1 Place the unit on a stable, horizontal surface.  
When the setting selected is not in accordance with the TV  
connected and depending on the type of appliance connected to  
the unit, the correct picture will not appear.  
2 Connect the unit to a TV depending on the TV and cables you  
use.  
8 Basic Connection  
3 Plug the end of the mains power cord into a mains outlet.  
ALOADINGB blinks on the front display panel when the AC  
plug of the mains power cord is connected into a mains  
outlet and it takes approximately 50 seconds for the unit to  
be turned on. This is not a malfunction.  
To connect to a TV with 21-pin SCART connector ^  
A Disconnect the TV aerial cable from the TV.  
B Connect the TV aerial cable to the [ANTENNA IN] connector on  
the rear panel of the unit.  
C Connect the [ANTENNA OUT] connector on the rear panel of  
the unit and the TV’s aerial connector with the supplied RF  
cable.  
D Connect the [L-1 IN/OUT] connector on the rear panel of the  
unit and the TV’s 21-pin SCART connector with a supplied 21-  
pin SCART cable.  
The [L-1 IN/OUT] connector accepts and delivers either a  
composite signal (regular video signal), Y/C signal or RGB  
signal.  
Set your TV to the VIDEO (or AV), Y/C, or RGB mode according  
to the type of your TV’s SCART connector.  
NOTE:  
The [ANTENNA OUT] connector is only used to pass antenna  
signal to the TV. It is necessary to connect the [L-1 IN/OUT]  
connector to the TV to enjoy audio-visual programmes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                         
INITIAL SETTINGS  
EN  
19  
Before starting, make sure of the following:  
The TV aerial cable should be connected to the unit.  
The unit’s mains power cord should be connected to a mains  
outlet.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Auto Set Up  
Auto Channel Set/Auto Clock Set/Auto Guide  
Programme Number Set  
1 Press A on the unit or DVD A on the remote control to turn  
on the unit. The AUTO SET/T-V LINK display appears on the TV  
screen.  
After the A button on the unit (or DVD A on the remote  
control) is pressed for the first time to turn on the unit, the Auto  
Set Up function sets the tuner channels, clock and Guide  
Programme numbers automatically.  
2 Press selection keys to  
INITIAL SET UP > AUTO CH SET  
select AAUTO SETB, then  
press ENTER. The AUTO  
AUTO SET  
T-V LINK  
SET screen will appear.  
When AUTO SET is  
completed, ASCAN  
COMPLETEDB appears on  
the TV screen. Select AOKB.  
SET UP  
EXIT  
ENTER SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SELECT  
A
INITIAL SET UP > AUTO SET  
CABLE/SAT  
TV  
DVD  
AUTO SET  
PLEASE WAIT...  
DVD A  
CANCEL  
ENTER  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SET UP  
EXIT  
SELECT  
ATTENTION:  
AAUTOB blinks on the front display panel; do NOT press any button  
on the unit or remote control until the front display panel shows  
A– –:– –B as illustrated on page 21.  
When you have connected the unit to a TV offering T-V Link via a  
fully-wired 21-pin SCART cable (A pg. 18) and the TV is turned  
on, the unit automatically performs the Preset Download  
(A pg. 20) even if you select AAUTO SETB for Auto Set Up  
function.  
ENTER  
Selection Keys  
FGDE  
ATTENTION:  
Once you have performed Auto Set Up, even if the unit’s memory  
backup has expired, all the stored stations and their Guide  
Programme numbers remain in the unit’s memory and the unit  
will not perform Auto Set Up again. The unit only performs Auto  
Clock Set when the unit is turned on.  
If you have moved to a different area, perform each setting as  
required.  
Tuner setting (A pg. 74)  
Clock setting (A pg. 77)  
If a new station starts broadcasting in your area, perform tuner  
setting. (A pg. 74)  
NOTES:  
In areas where no TV station transmits a PDC (Programme  
Delivery Control) signal, the unit can perform neither Auto Clock  
Set nor Auto Guide Programme Number Set.  
Auto Clock Set may not function properly depending on the  
reception condition.  
After AAuto Set UpB is completed, perform AMonitor SetB on  
page 23.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
INITIAL SETTINGS  
EN  
20  
If you have connected the unit to your TV via a 21-pin SCART  
cable (A pg. 18), the unit will automatically perform Preset  
Download instead of the Auto Set Up in step 2 on page 19. After  
downloading, the unit sets the clock and Guide Programme  
numbers automatically.  
Preset Download  
Auto Channel Set by Downloading from TV/Auto Clock  
Set/Auto Guide Programme Number Set  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
ATTENTION:  
1 Press A on the unit or DVD A on the remote control to turn  
on the unit. The AUTO SET/T-V LINK display appears on the TV  
screen.  
You can use this function only with a TV offering T-V Link, etc.*  
Be sure to use a fully-wired 21-pin SCART cable.  
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,  
SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART  
cable. The degree of compatibility and available functions may differ by  
system.  
2 Press selection keys to select AT-V LINKB and press ENTER.  
The T-V LINK screen will appear.  
When T-V LINK is completed,  
INITIAL SET UP > AUTO CH SET  
ASCAN COMPLETEDB  
appears on the TV screen.  
Select AOKB.  
CABLE/SAT  
AUTO SET  
T-V LINK  
TV  
DVD  
SET UP  
EXIT  
ENTER SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SELECT  
INITIAL SET UP > T-V LINK  
T-V LINK  
PLEASE WAIT...  
ENTER  
Selection Keys  
DE  
CANCEL  
ENTER  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SET UP  
EXIT  
SELECT  
ATTENTION:  
Preset positions on the front  
display panel increase from APR 1B; do NOT press any button on  
the unit or remote control until the front display panel shows clock  
time, APR 1B or A– –:– –B as illustrated on page 21.  
If you press any button on the unit or remote control while  
downloading is in progress, it will be interrupted.  
NOTES:  
For details, refer to the instruction manual of your TV.  
In areas where no TV station transmits a PDC (Programme  
Delivery Control) signal, the unit can perform neither Auto Clock  
Set nor Auto Guide Programme Number Set.  
reception condition.  
On this unit, the characters available for station names (ID) are  
A–Z, 0–9, –, Z, + and & (space). Some names of downloaded  
stations may differ from those of your TV. (A pg. 76)  
After APreset DownloadB is completed, perform AMonitor SetB  
on page 23.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
INITIAL SETTINGS  
EN  
INFORMATION  
Just Clock  
Your unit is equipped with the Just Clock function which provides  
accurate time keeping through automatic adjustments at regular  
intervals, by reading data from a PDC signal. If you want to take  
advantage of this function, simply set it to AONB. (A pg. 77)  
Results Of Auto Set Up/Preset Download Appearing  
On The Front Display Panel  
If both Auto Channel Set and  
Auto Clock Set have been  
performed successfully, the  
correct current time is displayed.  
Turn on the TV and select its AV mode, then make sure that all  
necessary stations have been stored in the unit’s memory by using  
the PR +/– button(s).  
If you have any difficulty with the above procedures call the JVC  
Customer Service Hot Line on 0870 330 5000.  
If station names (ID – A pg. 88) have also been stored in the  
unit’s memory, the station name will be displayed at the top right  
corner of the TV screen for about 5 seconds when the unit is  
tuned to a different station.  
If you want to set the tuner manually such as to add or skip  
channels, to change channel positions, or to set or change  
station names, see pages 75 – 76.  
T-V Link Functions  
When you connect the unit to your TV via a fully-wired 21-pin  
SCART cable (A pg. 18), the following functions are available. You  
can use these functions only with a TV offering T-V Link, etc.*  
For details, refer to the instruction manual of your TV.  
* Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK,  
Q-Link or DATA LOGIC via a fully-wired 21-pin SCART cable. The degree  
of compatibility and available functions may differ by system.  
If Auto Channel Set has  
succeeded but Auto Clock Set  
has not, APR 1B (channel  
position) is displayed.  
TV Auto Power On  
The TV will turn on and be set to its AV mode automatically  
whenever you start playback.  
OR  
For details, refer to the instruction manual of your TV.  
If both Auto Channel Set and Auto Clock Set have failed,  
A– –:– –B is displayed.  
A Turn on the TV and select its AV mode, then make sure that all  
necessary stations have been stored in the unit’s memory by  
using the PR +/– button(s).  
Unit Auto Standby  
You can use your TV’s remote control to turn off the unit.  
For details, refer to the instruction manual of your TV.  
Direct Rec  
If station names (ID – A pg. 88) have also been stored in the  
unit’s memory, the station name will be displayed at the top right  
corner of the TV screen for about 5 seconds when the unit is  
tuned to a different station.  
You can easily start recording the programme that you are  
watching on your TV. When you use this function, set ADIRECT  
RECB to AONB. (A pg. 72)  
If you want to set the tuner manually such as to add or skip  
station names, see pages 75 – 76.  
B Perform AClock SetB (A pg. 77).  
ATTENTION:  
After making sure the cables are connected properly, turn off the  
unit’s power once, then turn the unit’s power back on again.  
Perform AAuto Set UpB (A pg. 19) or APreset DownloadB  
(A pg. 20) again.  
IMPORTANT:  
To check if the Guide Programme numbers have been set  
correctly, perform the VIDEO Plus+ Timer Programming.  
(A pg. 46)  
In certain reception conditions, station names may not be stored  
correctly, and auto Guide Programme Number Set may not work  
properly. If the Guide Programme numbers are not set properly  
when you timer record a TV programme using the VIDEO Plus+  
system, the unit will record a TV programme of a different station.  
When programming the timer using the VIDEO Plus+ system, be  
sure to check the desired channel is selected correctly.  
(A pg. 46)  
Your unit memorizes all detected stations even if reception of  
some of them is poor. You can delete those stations with an  
unacceptable picture. (A pg. 76, ADelete A ChannelB)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
INITIAL SETTINGS  
EN  
22  
Menu/Audio/Subtitle Language Set (DVD deck only)  
Some DVD discs contain the DVD menu display, audio and  
subtitles in multiple languages. With these discs, you can set the  
default language as you like.  
Language  
Turn on the unit.  
The procedure shows how to set AMENU LANGUAGEB as an  
example.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
1 Press DVD so that the DVD lamp lights up on the unit.  
2 Press SET UP to access the Main Menu screen.  
CABLE/SAT  
TV  
DVD  
3 Press selection keys to select ADVD VIDEO SET UPB, then  
HDD  
press G.  
DVD  
4 Press selection keys to select  
DVD VIDEO SET UP HDD/DVD/DV SET UP FUNCTION SET UP  
INITIAL SET UP  
ALANGUAGESETB,thenpress  
G.  
LANGUAGE SET  
AUDIO OUTPUT  
PARENTAL LOCK DISC PLAY SET UP  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ENGLISH  
ENGLISH  
5 Press selection keys to select  
AMENU LANGUAGEB, then  
press ENTER.  
ENTER  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SET UP  
EXIT  
ENTER  
6 Press selection keys to select  
your desired language, then  
press ENTER.  
SELECT  
Selection Keys  
FGDE  
See ALanguage Code ListB (A pg. 85).  
7 Press SET UP to complete the setting.  
NOTE:  
When the selected language is not available on the disc, the disc’s  
default menu language is played back.  
SET UP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
INITIAL SETTINGS  
EN  
23  
1 Press DVD so that the DVD lamp lights up on the unit.  
2 Press SET UP to access the Main Menu screen.  
Monitor Set  
You cannot set the monitor type during recording or playback.  
You can select the monitor type depending on the TV used when  
you play back DVD VIDEO discs recorded for wide-screen TVs.  
3 Press selection keys to select AFUNCTION SET UPB, then  
press G.  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
4 Press selection keys to select  
DVD VIDEO SET UP HDD/DVD/DV SET UP FUNCTION SET UP  
INITIAL SET UP  
AVIDEO IN/OUTB, then press  
G.  
REC/PLAY SET UP  
DISPLAY SET  
VIDEO IN/OUT  
MONITOR TYPE  
F-1 INPUT  
4:3LB  
VIDEO  
5 Press selection keys to select  
AMONITORTYPEB, thenpress  
ENTER.  
L-1 OUTPUT  
L-1 INPUT  
SCART VIDEO  
VIDEO  
CABLE/SAT  
TV  
DVD  
L-2 SELECT  
VIDEO  
ENTER  
SELECT  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SET UP  
EXIT  
6 Press selection keys to select  
the desired option, then press  
ENTER.  
DVD  
7 Press SET UP to complete the setting.  
* The boldface settings below indicate the settings at your purchase.  
8 MONITOR TYPE - 4:3LB / 4:3PS / 16:9AUTO / 16:9FIX  
ENTER  
4:3LB (Letter Box conversion):  
Selection Keys  
FGDE  
Select this when the aspect ratio of your TV is 4:3 (conventional  
TV). While viewing a wide screen picture, the black bars appear  
on the top and the bottom of the screen.  
4:3PS (Pan&Scan):  
Select this when the aspect ratio of your TV is 4:3 (conventional  
TV). While viewing a wide screen picture, the black bars do not  
appear; however, the left and right edges of the pictures will not  
be shown on the screen.  
SET UP  
16:9AUTO (Wide television conversion):  
Select this when the aspect ratio of your TV is 16:9 (wide TV).  
16:9FIX (Wide television conversion):  
Select this when the aspect ratio of your TV is fixed to 16:9  
(wide TV). The unit automatically adjusts the screen width of  
the output signal correctly when playing back a picture whose  
aspect ratio is 4:3.  
Pan&Scan/Letter Box  
In general, DVD VIDEO disc are produced for a wide-screen TV  
with 16:9 aspect ratio.  
Material with this ratio will not fit to a TV with 4:3 aspect ratio.  
There are two styles to display the image, APan&ScanB (PS) and  
ALetter BoxB (LB).  
Pan&Scan  
The right and left side of the image are cut off.  
The image fills the screen.  
The picture will be shown in the A4:3LBB  
mode depending on the disc even if the  
A4:3PSB mode is selected.  
Letter Box  
Black bands appear at the top and bottom of  
the image. The image itself appears in 16:9  
aspect ratio.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
BASIC OPERATIONS ON DVD DECK  
EN  
24  
To play back an MP3/JPEG disc, see APlayback With MP3/WMA/  
JPEG NavigationB (A pg. 57).  
Basic Playback  
1 Load a disc.  
For details, refer to APlacing A DiscB (A pg. 9).  
Pressing I also closes the disc tray.  
Playback begins automatically if an auto-playback DVD disc is  
loaded.  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
2 Press DV/HDD/DVD SELECT on the unit repeatedly or DVD on  
the remote control so that the DVD lamp lights up on the unit.  
3 Press I to start playback.  
DV/HDD/DVD  
If you load a DVD disc whose region code does not match the  
unit, AREGION CODE ERRORB appears on the TV screen. For  
details, refer to ARegion NumberB (A pg. 7).  
M
I
SELECT  
If ACAN NOT PLAY BACK DISC UNDER CURRENT SETTINGB  
With Video CD/SVCD discs with PBC control or some DVD  
discs, the menu display may appear on the TV screen after  
starting playback. In this case, select an item which you want to  
play back from the menu. Otherwise, the playback cannot go  
forward. Refer to APlayback Control (PBC) FunctionB  
(A pg. 28) or ALocating A Desired Scene Using The DVD  
MenuB (A pg. 25).  
DVD lamp  
o
W
CABLE/SAT  
TV DVD  
The Library Database Navigation also enables you to search  
and select the desired titles. (A pg. 52)  
DVD  
4 Press W to pause playback.  
To resume normal playback, press I.  
5 Press o to stop playback.  
When a recordable disc is played, playback stops and a  
programme received with the unit’s tuner or AV input (from  
external AV source) resumes on the TV screen.  
When a playback-only disc is played, playback stops and the  
TV screen becomes all blue when you press o. Pressing o  
again resumes a programme received with the unit’s tuner.  
If M is pressed during playback, playback stops, then the disc  
tray opens.  
ENTER  
I
o
W
NOTES:  
When the Library Database Navigation screen appears, choose  
a thumbnail image of the desired title on the TV screen, then  
press ENTER. (A pg. 52)  
It is not possible to playback the DVD disc recorded in 96 kHz on  
DVD during recording or Live Memory Playback on HDD.  
It is possible to play back on the DV deck and the HDD/DVD deck  
simultaneously. However, either DVD or HDD can be played at  
the same time.  
ATTENTION:  
It takes approximately 30 seconds to read a disc depending on  
the type and condition of the disc since this unit is multi-disc  
compatible (DVD-RAM, DVD-RW, DVD-R). It may even take  
several minutes when a disc is dirty, scratched or warped.  
It may take a few seconds to start playback. This is not a  
malfunction.  
Forward/reverse high-speed search and other operations  
cannot be performed while playback is stopped.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
BASIC OPERATIONS ON DVD DECK  
EN  
25  
Current playback point  
Playback Features  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Press DVD so that the DVD lamp lights up on the unit.  
Previous  
programme  
or  
Scene 2  
(Chapter 2)  
or  
Drama  
or  
Scene 3  
(Chapter 3)  
or  
Movie  
or  
Scene 5  
(Chapter 5)  
or  
Next  
programme  
or  
(Chapter 4)  
or  
CABLE/SAT  
TV  
DVD  
Track 3  
Track 5  
DVD  
Track 2  
Track 4  
0-9  
Reverse  
Forward  
: marked points if any (A pg. 27) or beginning of recording  
TOP MENU  
ENTER  
Variable Speed Search  
Selection Keys  
FGDE  
MENU  
S
I
T
During playback, press N for forward variable speed search, or  
O for reverse variable speed search.  
Each press of the button increases the search speed for each  
direction.  
N/SLOW +  
W
O/SLOW  
-
o
JUMP  
-
To resume normal playback, press I.  
JUMP +  
For Audio CD  
You can perform 4 levels of speed search with N and O. (Audio  
is active also during variable speed search.) You cannot perform  
slow motion for each direction.  
Reverse  
O
N
Forward  
Locating A Desired Scene Using The DVD Menu  
Reverse  
Slow Motion  
3 steps  
Reverse Search Reverse  
Normal  
Play  
Slow Motion  
3 steps  
Forward Search  
4 steps  
4 steps  
Play  
DVD VIDEO discs may have top menu and disc menu.  
1
-
116  
-
½
-
¼
60  
-60 -15 -5 -3  
-1  
1
3
5
15  
½
¼
16  
Top menu  
DVD discs generally have their own menus which show the disc  
contents. These menus contain various items such as titles of a  
movie, names of songs, or artist information. You can locate a  
desired scene by using the top menu displayed on the TV screen.  
Press TOP MENU to access the top menu.  
Still Picture/Frame-By-Frame Playback  
Disc menu  
1 Press W to pause during playback.  
Disc menus include playback data (angle menu, subtitle menu,  
etc.) specific to each title.  
2 Press SLOW – (O) or SLOW + (N) to activate frame-by-  
frame playback.  
Each press of SLOW – (O) or SLOW + (N) advances/  
reverses the still picture frame by frame.  
Frame-by-frame playback for reverse direction cannot be  
performed with Video CD/SVCD discs.  
To resume normal playback, press I.  
Press MENU to access the disc menu.  
1 Press TOP MENU or MENU to  
Example:  
access the DVD menu.  
2 Press selection keys to select  
a desired title, then press  
ENTER. Playback starts.  
It may be possible to select the  
desired item using the number  
keys depending on the menu  
display.  
Slow Motion  
NOTE:  
1 Press W to pause during playback.  
When A7B appears on the TV screen in step 1, the disc does not  
2 Press SLOW – (O) or SLOW + (N) for 2 or more seconds.  
Each press of SLOW – (O) or SLOW + (N) increases the  
slow motion speed for each direction.  
have a top menu or disc menu.  
Locating The Start Point Of The Item Or Skip The Item  
Slow motion for reverse direction cannot be performed with  
Video CD/SVCD discs.  
Press S or T during playback.  
Pressing T locates the start point or marked points of the item  
or skips the item in the forward direction, then resumes playback.  
Pressing S locates the start point or marked points of the item  
or skips the item in the reverse direction, then resumes playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                         
BASIC OPERATIONS ON DVD DECK  
EN  
26  
Skip Search  
Resume Function  
It is possible to memorise the position where you stop playback  
and resume playback from that position.  
Be sure to set ARESUMEB to AONB or ADISC RESUMEB.  
(A pg. 72)  
Resume function always works for DVD-R/DVD-RW discs that  
have not been finalised and DVD-RAM regardless of the setting  
of ARESUMEB.  
During playback, press v.  
Each press initiates an approximately 30-second period of fast-  
motion playback. Normal playback resumes automatically.  
Skip search cannot be performed when a VCD/SVCD disc is  
being played back with the PBC function.  
One Touch Replay  
1 Press o during playback to memorise a resume point.  
The unit enters Resume Stop mode and memorises the  
position where you have stopped playback as a resume point.  
(The inside of the disc status indicator on the front display panel  
blinks while memorising.)  
The unit retains a memory of the resume points of the last 30  
discs played back, even though they have been ejected if  
ARESUMEB is set to ADISC RESUMEB. (A pg. 72)  
Performing the following steps would erase the resume points:  
(The inside of the disc status indicator stops blinking and lights.)  
When ARESUMEB is set to AONB:  
You can move back the playback position slightly.  
Press w.  
Each press skips back for approximately 7 seconds and resumes  
playback.  
Pressing while paused skips back for approximately 7 seconds  
and resumes pause.  
Jump Search  
• Press A to turn off the unit.  
• Press M to take out the disc.  
• Press o in stop mode.  
• Press TOP MENU to display the top menu, then start playback by  
You can locate a scene ahead or behind the current one by  
jumping scenes according to selected time intervals (A pg. 73)  
during playback (or Live Memory Playback).  
selecting an item, etc.  
• Press MENU to display the disc menu, then start playback by  
selecting an item, etc.  
When ARESUMEB is set to ADISC RESUMEB:  
• Set ARESUMEB to AOFFB. (A pg. 72)  
• Press o in stop mode.  
• Press TOP MENU to display the top menu, then start playback by  
selecting an item, etc.  
Press JUMP – or JUMP +.  
To advance forward or back, press JUMP – or JUMP +  
repeatedly within 5 seconds of each press to continue jump.  
Depending on the time from where you want to start jump search,  
the first press of JUMP – or JUMP + will not necessarily lead to a  
jump of the selected time interval. The first press will lead to a  
jump to the nearest quarter points of an hour (15 min/ 30 min/ 45  
min/ 00 min). The subsequent jumps will then be in accordance  
to the selected time interval.  
• Press MENU to display the disc menu, then start playback by  
selecting an item, etc.  
2 Press I in stop mode to resume playback. The unit starts  
playback from the resume point.  
When you cannot advance any further (beginning or end of  
programme reached), the message AUNABLE TO GO BACK  
ANY MOREB appears on the screen and the on-air screen  
resumes. In such a case, press S, O or o.  
NOTES:  
ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD and  
already finalised DVD-R/DVD-RW (video mode) discs. For other  
types of discs, the function under AONB setting will be applied  
even if ARESUMEB is set to ADISC RESUMEB. (A pg. 72)  
If you stop the playback of a disc for which a resume point has  
already been memorised, the memory will be updated with the  
new resume point.  
Example:  
Playback search when jump interval is set to 15 MIN jumps.  
Taking for instance, you want to start jump search 40 minutes after  
the beginning of the programme. Pressing JUMP – or JUMP + will  
result in a jump to the scene at the 30 minutes point or 45 minutes  
point respectively as illustrated below. At the subsequent press, the  
scene will jump to the 15 minutes point or 1 hour point respectively,  
After the unit has memorised the resume points for 30 discs,  
remembering a new resume point will cause the unit to delete the  
oldest memorised point. Stopping playback of a disc for which a  
resume point is already stored may change the order in which the  
points are stored. This may potentially change the order in which  
points are deleted.  
When the unit memorises a resume point for a disc, it also  
remembers audio language, subtitle and angle settings.  
This function may not work for some Video CD/SVCDs.  
When ARESUMEB is changed to AONB or AOFFB (A pg. 72),  
resume points of the discs memorised with ARESUMEB set to  
ADISC RESUMEB will be cleared.  
Resume points are memorised for each side of a double-sided  
disc.  
When you switch to HDD while playing back JPEG/MP3 files,  
playback stops. The Resume Function doesn’t work when you  
switch to DVD thereafter to playback the disc.  
according to the selected time interval, which in this case is  
A15 MIN  
B.  
Time counter  
40 min  
0 min  
1 h 15 min  
15 min  
30 min  
45 min  
1 h  
Beginning of programme  
Current scene  
End of programme  
NOTE:  
Jump search cannot be performed with finalised DVD-R/DVD-RW  
(video mode) discs.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
BASIC OPERATIONS ON DVD DECK  
EN  
27  
Checking The Time Information  
CABLE/SAT  
TV DVD  
DVD  
You can check time information of a disc on the front display panel  
and the TV screen.  
0-9  
8 DVD-RAM/DVD-R/DVD-RW  
Each press of DISPLAY changes the display as follows:  
During recording  
MARK  
Clock time (front display panel only) N Current title elapsed time  
N Disc remaining time N (back to the beginning)  
ENTER  
Selection Keys  
FGDE  
During playback  
MENU  
Each title elapsed time N Total remaining time N Remaining time*  
N (back to the beginning)  
RETURN  
T/NEXT  
S/PREVIOUS  
* only discs before finalising  
I
o
During recording/playback or in stop mode  
Press REC MODE.  
The disc remaining time according to recording modes appears  
on the TV screen.  
REC MODE/REMAIN  
DISPLAY  
SET UP  
ON SCREEN  
It is possible to check disc remaining time according to recording  
modes also by pressing REMAIN.  
AUDIO  
SUBTITLE  
In FR mode, it is possible to set recording time in detail. While the  
recording mode and the disc remaining time are displayed by  
pressing REMAIN, press selection keys to select AFRB, then  
press D E to select the desired recording time. (A pg. 36)  
It is not possible to switch the recording mode during playback or  
while recording.  
ANGLE  
Marking Positions To Play Back Again Later  
8 Video CD/SVCD/Audio CD  
During playback or in stop mode  
Current track elapsed time N Current track remaining time N Total  
elapsed time N Total remaining time N (back to the beginning)  
It is possible to mark positions (up to 999 points) where you want to  
play back once again later, and start playback from a marked  
position. Marking onto DVD-RAM/RW (VR mode only) discs when  
recording is helpful to locate a start point when you play back the  
discs later.  
NOTES:  
When a PBC-compatible Video CD/SVCD disc is loaded,  
deactivate the PBC function. (A pg. 28)  
For pre-recorded DVD VIDEO, only the title, chapter and elapsed  
time are displayed when ON SCREEN is pressed.  
To mark positions:  
During playback, press MARK at  
positions you want to mark.  
AMARKB appears on the TV  
screen. You can easily locate the  
marked positions using S or T  
when you play back the disc.  
Angle Selection  
You can enjoy a variety of scene angles if a DVD VIDEO disc  
contains Amulti-angleB parts, where the same scene was shot from  
different angles.  
If the disc contains Amulti-angleB parts, AyB appears on the TV  
screen at the beginning of the Amulti-angleB part.  
To delete the marked positions:  
While paused, press S or T to  
locate a marked position you want to  
delete, then press MARK.  
Crossed AMARKB appears on the  
TV screen, and the marked position  
is deleted.  
1 Press ANGLE during playback.  
The angle selection display  
appears on the TV screen.  
When 3 scene angles are  
NOTES:  
contained.  
2 Press ANGLE or selection  
When a monaural programme changes to a stereo programme  
while recording, a mark signal is automatically recorded.  
For DVD-R/RW (Video mode) discs, marks are assigned  
automatically every 5 minutes.  
keys to select your desired  
angle.  
Each time you press ANGLE or the selection keys, the angle  
changes.  
When A7B appears on the TV screen, the current scene is not  
recorded from multiple angles. In addition, some discs prohibit  
angle selection.  
If MARK is pressed when playing back a disc that does not allow  
marks to be inserted, A7B appears on the TV screen.  
To clear the angle selection display, press ENTER. In addition,  
the angle selection display disappears automatically if no  
operation is done for 10 seconds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
BASIC OPERATIONS ON DVD DECK  
EN  
28  
Subtitle Selection  
Audio Language/Sound Selection  
Some DVD VIDEO discs contain more than one subtitle language,  
from among which you can choose the desired subtitle language.  
AhB appears on the TV screen at the beginning of the part where  
more than one subtitle language are recorded.  
Some DVD VIDEO discs contain the multiple audio language or  
sound. You can select the desired audio language or sound. For  
some Video CD/SVCD discs, you can switch the audio channel to  
choose Karaoke either with or without the vocal.  
1 Press SUBTITLE during  
1 Press AUDIO during playback.  
For example: DVD VIDEO  
ENGLISH  
playback. The subtitle selection  
The Audio Language/Sound  
ENGLISH  
display appears on the TV  
screen.  
Each time you press  
SUBTITLE, the subtitle display  
is switched on and off.  
selection display appears.  
When 3 subtitle languages are  
contained.  
2 Press AUDIO or selection  
When 3 audio languages are  
contained.  
keys to select your desired  
audio language/sound.  
Each time you press AUDIO or the selection keys, the audio  
language/sound changes.  
To clear the Audio Language/Sound selection display, press  
ENTER.  
2 Press selection keys to select your desired language.  
To clear the subtitle selection display, press ENTER.  
NOTES:  
When A7B appears on the TV screen, no subtitle language is  
NOTES:  
recorded.  
When A7B appears on the TV screen, no other audio language is  
recorded.  
When the subtitle language won’t be changed with the procedure  
above, change the subtitle on a disc menu displayed by pressing  
MENU.  
When the audio language won’t be changed with the procedure  
above, change the audio on a disc menu displayed by pressing  
MENU.  
Pressing AUDIO to select the audio language/sound is only  
possible during playback. It is not possible to select by pressing  
AUDIO in stop mode. However, you can select the desired audio  
language/sound from the setup menu while in stop mode.  
Audio Channel Selection  
When watching bilingual programmes or playing discs on which  
you recorded bilingual or stereo programmes, you can choose the  
desired audio channel.  
Playback Control (PBC) Function  
When ASUPERIMPOSEB is set to AAUTOB, you can confirm on  
the TV screen the audio channel you have chosen. (A pg. 73)  
Each time you press AUDIO, the audio  
Some Video CD/SVCD discs support the PBC function. PBC is an  
abbreviation of APlay Back ControlB. A Video CD/SVCD disc  
recorded with PBC has its own menus, such as a list of the songs  
on the disc. You can locate a specific scene by using the menu.  
channel changes.  
TRACK  
USE  
1 Press I in stop mode. The PBC menu appears.  
On-Screen Display  
2 Press the number keys to enter the number of the desired  
scene, then press ENTER. The unit starts playback of the  
selected item.  
For main audio of bilingual programme  
For sub audio of bilingual programme  
For stereo discs  
APBCB appears on the front display panel.  
When ANEXTB or APREVIOUSB appears on the TV screen:  
Pressing NEXT(T) advances to the next page.  
Pressing PREVIOUS(S) returns to the previous page.  
You can return to the menu by pressing RETURN.  
The method of the operation is different depending on the disc.  
For audio of left channel  
For audio of right channel  
NOTE:  
NOTE:  
It is not possible for DVD-R/DVD-RW (Video mode) disc playback  
to switch the audio channel. The audio channel is played back as  
set in AVIDEO MODE RECORDING AUDIOB setting. (A pg. 72)  
If you want to playback a PBC-compatible Video CD/SVCD disc  
without activating the PBC function, start playback with the PBC  
function, then press o to stop playback. The TV screen becomes  
all blue. Then start playback in stop mode by using the number  
keys to choose the track, then press ENTER.  
When you can’t switch the audio channel of a bilingual  
programme  
When the unit is connected with a digital audio device using an  
optional optical cable and ADIGITAL AUDIO OUTB is set to ADOLBY  
DIGITAL/PCMB, it is not possible to switch the audio channel of a  
bilingual programme recorded on a DVD-RAM or DVD-RW (VR  
mode) disc. (A pg. 70) In this case, perform the following steps  
using the remote control to switch ADIGITAL AUDIO OUTB from  
ADOLBY DIGITAL/PCMB to APCM ONLYB.  
A Press SET UP to access the Main Menu screen.  
B Press selection keys to select ADVD VIDEO SET UPB, then  
press G.  
C Press selection keys to select AAUDIO OUTPUTB, then press  
G.  
D Press selection keys to select ADIGITAL AUDIO OUTB, then  
press ENTER.  
E Press selection keys to select APCM ONLYB, then press  
ENTER. (A pg. 71)  
F Press SET UP to complete the setting.  
G Press AUDIO to select the desired audio channel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
BASIC OPERATIONS ON DVD DECK  
EN  
29  
A Disc type.  
B Select this for Repeat Playback. (See below)  
C Select this for A-B Repeat Playback. (A pg. 30)  
D Select this for search function. (A pg. 30)  
E Select this for time search function. (A pg. 31)  
Using The On-screen Bar  
F Select this to switch Simulated Surround Effect function.  
(A pg. 31)  
H Select this to switch picture source type. (A pg. 32)  
I Current status area for the selected item.  
J Select this for Programme Playback. (A pg. 32)  
K Select this for Random Playback. (A pg. 32)  
The on-screen bar allows you to control various playback  
functions. Some of the functions operated on Navigation Menu can  
be controlled on the On-screen bar.  
ATTENTION:  
The on-screen bar can also be used for the HDD deck.  
L Select this to control the switching interval of the slide show.  
(A pg. 32)  
Be sure to clear Library Database Navigation screen by pressing  
NAVIGATION.  
NOTE:  
Although examples of the on-screen bar are provided here only for  
3 types of discs, the on-screen bar will be displayed for whichever  
disc indicated in the left column.  
CABLE/SAT  
TV  
DVD  
Basic Operation On The On-screen Bar  
Example: When selecting Picture Control function of DVD  
During playback or while stopped  
1 Press ON SCREEN twice to access the on-screen bar. The  
item currently selected is highlighted and pointed by :.  
NAVIGATION  
TITLE 99  
DVD-  
CHAPTER 99  
EACH 0:00  
3D-ON CINEMA AUTO  
ENTER  
Selection Keys  
FGDE  
VIDEO  
RETURN  
2 Press selection keys to select A  
B, then press ENTER. The  
pop-up window appears under the selected item.  
TITLE 99 CHAPTER 99 EACH 0:00  
3D-ON CINEMA AUTO  
ON SCREEN  
DVD-  
VIDEO  
3 Press selection keys to select the desired option, then press  
ENTER.  
TITLE 99  
CHAPTER 99  
EACH 0:00  
3D-ON CINEMA AUTO  
How To Access The On-screen Bar  
1 Press ON SCREEN twice whenever a disc is loaded.  
DVD-  
VIDEO  
NORMAL  
CINEMA  
SHARP  
SOFT  
Contents of the on-screen bar during playback  
DVD VIDEO  
TITLE 99  
CHAPTER 99  
EACH 0:00  
3D-ON CINEMA AUTO  
To clear the on-screen bar  
Press ON SCREEN.  
DVD-  
VIDEO  
NOTE:  
See the corresponding pages for details on each menu item.  
Repeat Playback  
Video CD/SVCD  
TRACK 99  
EACH 0:00  
CINEMA  
VCD  
You can repeat playback as you like according to the type of disc.  
1 Press ON SCREEN twice to access the on-screen bar.  
2 Press selection keys to select AxB, then press ENTER. The  
pop-up window appears under the selected item.  
JPEG disc  
TITLE 99  
CHAPTER 99  
EACH 0:00  
3D-ON CINEMA AUTO  
GROUP 99 TRACK 99  
DVD-  
5 sec  
VIDEO  
JPEG  
3 Press selection keys repeatedly to select the desired Repeat  
mode, then press ENTER.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
BASIC OPERATIONS ON DVD DECK  
EN  
30  
DVD-RAM/RW/R  
To cancel A-B Repeat Playback  
Press selection keys to select AA-B xB, then press ENTER.  
OFF:  
Repeat playback is not performed.  
NOTES:  
A-B Repeat Playback may not work properly depending on the  
type of disc being used.  
ALL REPEAT:  
The whole disc is played back repeatedly.  
The subtitles recorded around the A-B point may not appear.  
When the end of the item is reached before the end point is set,  
the on-screen bar disappears from the TV screen. In such a  
case, repeat the procedure from step 1.  
TITLE REPEAT:  
The current title is played back repeatedly.  
DVD VIDEO  
The point B must be set at least 3 seconds after the point A.  
When playing back a DVD, A-B Repeat Playback is possible only  
within the same title.  
AA-B xB cannot be selected during Programme and Random  
Playback.  
OFF:  
Repeat playback is not performed.  
TITLE REPEAT:  
The current title is played back repeatedly.  
CHAPTER REPEAT:  
AA-B xB cannot be selected while stopped.  
The current chapter is played back repeatedly.  
Locating The Beginning Of A Desired Selection  
Audio CD/Video CD/SVCD/JPEG/MP3  
OFF:  
Repeat playback is not performed.  
ALL REPEAT:  
You can locate the beginning of a title, chapter, group or track.  
During playback or while stopped  
The whole disc is played back repeatedly.  
TRACK REPEAT*:  
1 Press ON SCREEN twice to access the on-screen bar.  
2 Press selection keys to select A9B, then press ENTER.  
The current track is played back repeatedly.  
* ATRACK REPEATB cannot be selected for JPEG discs.  
To clear the on-screen bar  
Press ON SCREEN.  
3 Press selection keys to select the desired item, then press  
ENTER.  
To cancel Repeat Playback  
Skip this step for Video CD/SVCD and Audio CD.  
Repeat the above procedure from step 1, select AOFFB in step 3,  
then press ENTER.  
For DVD-RAM/RW/R, DVD VIDEO  
ATITLE SEARCHB or ACHAPTER SEARCHB is selectable.  
(However, ACHAPTER SEARCHB is not selectable while stopped.)  
NOTES:  
Repeat Playback is not possible for a Video CD/SVCD with PBC  
For JPEG, MP3  
function.  
AGROUP SEARCHB or ATRACK SEARCHB is selectable. (However,  
ATRACK SEARCHB is not selectable while stopped.)  
Repeat Playback may not work properly depending on the type of  
the disc being used.  
For Video CD/SVCD, Audio CD  
ATRACKB is selectable.  
A-B Repeat Playback  
NOTE:  
Settings that are selectable during playback and stop mode differ  
depending on the type of disc and search used.  
GROUP 99  
CHAPTER 99  
EACH 179:59  
You can repeat the desired part.  
During playback  
5
CINEMA  
DVD-  
VIDEO  
1 Press ON SCREEN twice to access the on-screen bar.  
2 Press selection keys to select AA-B xB.  
TITLE SEARCH  
CHAPTER SEARCH  
3 Press ENTER at the beginning of the desired part you want to  
repeat (point A). The elapsed playing time of the point A  
appears.  
4 Press the number keys to enter the desired item number, then  
press ENTER.  
Playback starts from the selected section.  
Examples:  
A To select track 5, press the number key A5B.  
B To select track 15, press the number key A1B and A5B.  
C To select track 25, press the number key A2B, then A5B.  
TITLE 99  
CHAPTER 99  
EACH 0:00  
3D-ON CINEMA AUTO  
DVD-  
VIDEO  
A
1 : 25 : 58  
B
:
:
If you have specified a wrong selection  
Press RETURN on the remote control and repeat the above  
procedures from step 2.  
4 Press ENTER at the end of the desired part you want to repeat  
(point B). The elapsed playing time of the point B appears.  
The selected part of the disc (between point A and B) is played  
repeatedly.  
To clear the on-screen bar  
Press ON SCREEN.  
NOTES:  
TITLE 99  
CHAPTER 99  
EACH 0:00  
3D-ON CINEMA AUTO  
When A7B is displayed on the TV screen in step 4, the chapter  
you have selected is not contained in the disc, or chapter search  
does not work on the disc.  
DVD-  
VIDEO  
Before you press ENTER, playback may start automatically when  
you enter the section’s number depending on the disc.  
This function is not possible for a Video CD/SVCD with PBC  
function.  
A
1 : 25 : 58  
B
1 : 40 : 00  
To clear the on-screen bar  
Press ON SCREEN.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
BASIC OPERATIONS ON DVD DECK  
EN  
31  
Simulated Surround Effect  
CABLE/SAT  
TV DVD  
It is possible to get a simulated surround effect from your stereo  
system. You can enjoy the virtual surround sound with your 2-  
channel stereo system.  
0-9  
1 Press ON SCREEN twice to access the on-screen bar.  
CANCEL  
2 Press selection keys to select A  
B, then press ENTER.  
A3D-ONB appears above the selected item and Simulated  
Surround Effect is activated.  
Each time you press ENTER, A3D-ONB appears and disappears  
alternately.  
ENTER  
Selection Keys  
FGDE  
RETURN  
T
S
TITLE 99  
DVD-  
CHAPTER 99  
EACH 0:00  
3D-ON CINEMA AUTO  
I
CLEAR  
VIDEO  
ON SCREEN  
To clear the on-screen bar  
Press ON SCREEN.  
To cancel the simulated surround effect  
Press ENTER to clear A3D-ONB from the screen.  
NOTES:  
Simulated Surround Effect works correctly only when playing  
back a title recorded in multichannels.  
Simulated Surround Effect does not affect the DVD VIDEO  
bitstream signal from the [DIGITAL AUDIO OUT] connectors.  
When Simulated Surround Effect is activated, the settings of  
AANALOG AUDIO OUTB and AD. RANGE CONTROLB are  
disabled. (A pg. 71)  
Time Search  
You can play back a disc from the desired point by specifying the  
elapsed playing time from the beginning of a programme  
(DVD-RAM, DVD-R, DVD-RW, DVD VIDEO and HDD) or a disc  
(Video CD/SVCD and Audio CD).  
Simulated Surround Effect cannot be activated under the  
following conditions:  
When the HDD deck is in the recording mode.  
When the HDD or DVD deck is in the timer standby mode.  
When a disc containing both the Dolby Digital 5.1CH and 2CH  
sound formats is playing back a scene that is not in the 5.1CH  
sound format.  
1 Press ON SCREEN twice to access the on-screen bar.  
2 Press selection keys to select Aj9B, then press ENTER. The  
pop-up window appears under the selected item.  
TITLE 99  
CHAPTER 99  
EACH 0:00  
CINEMA AUTO  
Adjusting The Picture Quality  
DVD-  
VIDEO  
3 Press the number keys to enter the time, then press ENTER.  
Playback starts from the specified time.  
Example:  
You can obtain optimal picture quality by selecting an appropriate  
picture mode.  
1 Press ON SCREEN twice to access the on-screen bar.  
To play back from a point 12 (minutes): 50 (seconds) elapsed.  
2 Press selection keys to select A  
B, then press ENTER. The  
TIME  
TIME  
TIME  
TIME  
TIME  
pop-up window appears under the selected item.  
TITLE 99 CHAPTER 99 EACH 0:00  
CINEMA AUTO  
Press 1  
Press 5  
Press 2  
Press 0  
DVD-  
VIDEO  
If you have specified a wrong selection,  
Press RETURN on the remote control and repeat the above  
procedures from step 2.  
3 Press selection keys to select the desired option, then press  
ENTER.  
NORMAL:  
To clear the on-screen bar  
Press ON SCREEN.  
Normally select this option.  
CINEMA:  
NOTES:  
Suitable for a movie disc, etc.  
When A7B is displayed on the TV screen in step 3, you have  
selected a point that exceeds the recording time of the disc.  
Some DVD VIDEO discs do not contain time information, and it is  
not possible to use the Time Search function. In such cases, A7B  
is displayed on the TV screen as well.  
This function is not possible for a Video CD/SVCD with PBC  
function.  
SHARP:  
Clearer, sharper-edged picture when viewing images with lots  
of flat, same-coloured surfaces such as cartoons.  
SOFT:  
Select this option when too much noise appears.  
To clear the on-screen bar  
Press ON SCREEN.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
BASIC OPERATIONS ON DVD DECK  
EN  
32  
4 Press I. Playback starts in the programmed order.  
When all of the programmed tracks have been played back,  
Programme Playback stops, but the programmed information  
remains.  
Setting The Progressive Mode  
To add tracks to the end of the programme, perform steps 3.  
During Programme Playback, pressing T skips to the next  
selection of the programme. Pressing S returns to the  
beginning of the current selection.  
You can obtain optimal picture quality by selecting whether the  
content on the disc is processed by field (video source) or by frame  
(film source).  
1 Set the unit to the progressive scan mode. (A pg. 80)  
2 Press ON SCREEN twice to access the on-screen bar.  
To clear the on-screen bar and the contents of the programme  
Press ON SCREEN.  
To cancel Programme Playback  
Press selection keys to select APRGMB, then press ENTER.  
3 Press selection keys to select A  
B, then press ENTER. The  
pop-up window appears under the selected item.  
TITLE 99 CHAPTER 99 EACH 0:00  
3D-ON  
NOTE:  
Programme Playback is not possible depending on the type of disc.  
AUTO  
CINEMA  
DVD-  
Random Playback  
VIDEO  
4 Press selection keys to select the desired option, then press  
ENTER.  
You can play back all the tracks on the disc in random order.  
While stopped  
AUTO:  
This mode automatically detects film and video content for  
progressive playback. When film content is found, flag detection  
is used to invoke playback of film data in full screen. When  
video content is found, pictures from multiple fields are used to  
detect sections with movement, and then this movement  
undergoes advanced image processing for output of sharp,  
detailed progressive images without any reduction in image  
quality where movement occurs. Normally, operation in this  
mode is recommended.  
1 Press ON SCREEN twice to access the on-screen bar.  
2 Press selection keys to select ARNDB, then press ENTER.  
Playback starts in random order.  
TRACK 99  
EACH 0:00  
CINEMA  
VCD  
FILM:  
To clear the on-screen bar  
Press ON SCREEN.  
Suitable for playing back a progressive scanned film source  
disc.  
To cancel Random Playback  
VIDEO:  
Perform steps 1 and 2.  
Suitable for playing back a video source disc. The outlines on  
the played back pictures will be soft.  
NOTE:  
The same track will not be played back more than once during  
Random Playback.  
To clear the on-screen bar  
Press ON SCREEN.  
NOTE:  
Select The Switching Interval Of The Slide Show  
When the progressive mode is set, be sure to set AL-1 OUTPUTB to  
ACOMPONENTB (A pg. 64). Progressive scan is output only from  
[COMPONENT VIDEO OUT] connectors.  
You can control the switching interval of the slide show.  
Programme Playback  
1 Press ON SCREEN twice to access the on-screen bar.  
2 Press selection keys to select A  
B, then press ENTER. The  
pop-up window appears under the selected item.  
You can programme up to 30 tracks (Video CD/SVCD or Audio CD)  
to play back in the desired order.  
GROUP 99 TRACK 99  
5 sec  
While stopped  
JPEG  
1 Press ON SCREEN twice to access the on-screen bar.  
2 Press selection keys to select APRGMB, then press ENTER.  
3 Press selection keys to select the desired option, then press  
ENTER.  
The programme table appears under on-screen bar.  
TRACK 99  
EACH 0:00  
Each time you press the selection keys, the interval changes  
as follows:  
CINEMA  
5 sec Y 10 sec Y 15 sec Y 20 sec Y 25 sec Y 30 sec Y  
(Back to the beginning)  
VCD  
To clear the on-screen bar  
3 Press the number keys to  
enter the track numbers in the  
desired order.  
USE [0-9] KEYS TO SELECT TRACK  
Press ON SCREEN.  
NOTE:  
JPEG files are played back as a slide show. It may take more time  
to display an image with larger file size.  
Examples:  
A To select track 5, press the  
number key A5B and ENTER.  
B To select track 15, press the  
number key A1B and A5B.  
Program Total Time  
C To select track 25, press the number key A2B and A5B.  
If you have specified a wrong selection  
Press CANCEL(L). The last selection is erased.  
Or press CLEAR (o). The whole selection is erased.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                         
BASIC OPERATIONS ON DVD DECK  
EN  
33  
8 Press selection keys to select your country code, then press  
ENTER.  
Parental Lock  
If you do not need to change your country code, jump to 10.  
See ACountry/Area Code List for Parental LockB (A pg. 86).  
9 Press the number keys to enter the same password as in  
step 6 above, then press ENTER.  
This function restricts playback of DVD VIDEO discs which contain  
violent (and other) scenes according to the level set by the user.  
For example, if a movie which includes violent scenes supports the  
parental lock feature, such scenes which you do not want to let  
children view can be cut or replaced by other scenes.  
10Press SET UP to complete the setting.  
NOTE:  
Remember your password, or make a note of it.  
To Change The Settings  
Turn on the unit.  
You can change the Parental Lock settings later.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Press DVD so that the DVD lamp lights up on the unit.  
1 Perform steps 1 to 3 of ATo Set Parental Lock For The First  
TimeB to access the APARENTAL LOCKB screen before  
continuing.  
CABLE/SAT  
To change the level  
TV  
DVD  
2 Press selection keys to select APARENTAL LEVELB, then  
press ENTER.  
DVD  
3 Press selection keys to select the desired level, then press  
ENTER.  
0-9  
To change the country code  
ENTER.  
5 Press selection keys to select your country code, then press  
ENTER.  
See ACountry/Area Code List for Parental LockB (A pg. 86).  
ENTER  
Selection Keys  
FGDE  
6 Press the number keys to enter the same password as in  
step 6 of ATo Set Parental Lock For The First TimeB, then press  
ENTER.  
7 Press SET UP to complete the setting.  
NOTE:  
SET UP  
If you forget your password, enter A8888B in step 6.  
To Temporarily Release Parental Lock  
When you set the Parental Lock level strictly, some discs may not  
be played back at all. When you insert such a disc and try to play it  
back, the confirmation screen appears on the TV screen, asking  
you whether you want Parental Lock to be temporarily released or  
not.  
To Set Parental Lock For The First Time  
While stopped  
1 Load a disc.  
If the disc is rated higher than the selected level, the  
confirmation screen appears.  
1 Press SET UP to access the Main Menu screen.  
2 Press selection keys to select ADVD VIDEO SET UPB, then  
2 Press selection keys to select AYESB, then press ENTER.  
press G.  
If you select ANOB, you cannot play back that disc.  
3 Press selection keys to select  
DVD VIDEO SET UP HDD/DVD/DV SET UP FUNCTION SET UP  
INITIAL SET UP  
3 Press the number keys to enter the same password as in  
step 6 of ATo Set Parental Lock For The First TimeB, then press  
ENTER.  
APARENTAL LOCKB, then  
press G.  
LANGUAGE SET  
AUDIO OUTPUT  
PARENTAL LOCK DISC PLAY SET UP  
PARENTAL LEVEL  
COUNTRY CODE  
NONE  
US  
When you enter the correct password, the Parental Lock is  
released and the unit starts playback.  
If you enter a wrong password, AENTRY ERRORB appears on  
the TV screen. Enter the correct password.  
SET UP  
EXIT  
ENTER  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SELECT  
If you have successively entered wrong password three times,  
AENTRY ERROR CAN NOT CHANGE PASSWORDB appears  
on the TV screen. In such a case, press ENTER. The disc will  
stop. Then play back the disc again, and try the procedure  
again from step 1.  
4 Press selection keys to select  
APARENTAL LEVELB, then  
press ENTER.  
DVD VIDEO SET UP HDD/DVD/DV SET UP FUNCTION SET UP  
INITIAL SET UP  
LANGUAGE SET  
AUDIO OUTPUT  
PARENTAL LOCK DISC PLAY SET UP  
PARENTAL LEVEL  
COUNTRY CODE  
NONE  
US  
5 Press selection keys to select  
the desired level, then press  
ENTER.  
The smaller the value of level  
is, the more restrictive the  
Parental Lock level becomes.  
NOTE:  
If you forget your password, enter A8888B in step 3.  
SET UP  
EXIT  
ENTER  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SELECT  
Select ANONEB to cancel the restriction.  
6 Press the number keys to enter your desired four-digit number,  
then press ENTER.  
If you made a mistake, enter a correct number again.  
7 Press selection keys to select ACOUNTRY CODEB, then press  
ENTER.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
BASIC OPERATIONS ON DVD DECK  
EN  
34  
7 Press o twice to stop recording.  
It takes about 10 seconds to end the writing session when you  
stop recording.  
Basic Recording  
NOTES:  
When switching from the HDD to the DVD deck, or when the unit  
is turned on while a playback only disc is loaded, the DVD deck  
enters into resume stop mode automatically and the TV screen  
becomes all blue. To display the EE* signal on the screen, press  
o.  
* EE means Electronics to Electronics, no mechanical movement is  
involved. EE signal means a programme received with the unit's tuner or  
the AV input signals.  
It is recommended to format a DVD-RAM disc before use if you  
use the disc on this unit for the first time.  
When using a brand-new DVD-RW disc, format the disc either in  
VR mode or in Video mode. (A pg. 78)  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
ATTENTION:  
It is not possible to record programmes on a DVD-R disc which  
has already been finalised.  
Recordings made on DVD-R/RW disc must be finalised to play  
back on other DVD players. Perform AFinalise A Disc (DVD Deck  
Only)B (A pg. 79).  
DV/HDD/DVD  
DVD lamp  
I
W
SELECT  
You can record up to 99 programmes and 99 play lists on each  
disc.  
Some programmes can only be recorded one time.  
When recording is started, an index of the first part of recording is  
automatically recorded. (A pg. 51) To record satellite  
programmes, refer to page 50. To delete the index, refer to  
page 53.  
DVD recording  
lamp  
R
o
PR +/-  
REC  
MODE  
Recording sometimes may stop or cannot be performed even  
when there is enough available capacity remaining on the disc if  
the signal source is copy-protected or intermittent.  
It is not possible to record on both DVD and HDD simultaneously.  
It is not possible to record from this unit’s built-in tuner to the DV  
deck.  
CABLE/SAT  
TV DVD  
DVD  
0-9  
Recording Mode  
PR+/  
-
MPEG2 format is used as recording format. As a guide for picture  
quality, the AbpsB unit is used to represent how much data can be  
recorded per second. The larger this value is, the better the picture  
quality becomes but more capacity is required for the recording.  
Select XP or SP for programmes where quick movement occurs,  
such as sports programmes, and LP or EP for talk shows, etc. with  
relatively less movement.  
ENTER  
I
The recording modes for a 4.7 GB disc are set as follows:  
R
o
W
Recording mode  
Recording amount  
(approx.)  
Maximumrecording  
time (approx.)  
REC MODE  
XP  
SP  
LP  
EP  
10 Mbps  
5 Mbps  
1 hour  
2 hours  
4 hours  
6 hours  
2.5 Mbps  
1.6 Mbps  
(A pg. 36)  
1 Load a recordable disc.  
For details, refer to APlacing A DiscB (A pg. 9).  
1 – 6 hours  
The amount varies  
depending on the  
selected time.  
FR  
2 Press DV/HDD/DVD SELECT on the unit repeatedly or DVD on  
420  
7 hours  
8 hours  
the remote control so that the DVD lamp lights up on the unit.  
480  
3 Press PR +/– or the number keys to select the channel you  
For details on FR mode, refer to AFree Rate FunctionB  
(A pg. 36).  
wish to record.  
4 Press REC MODE repeatedly to select the recording mode,  
then press ENTER.  
Each time you press REC MODE, the recording mode changes  
as follows:  
XP N SP N LP N EP N FR (60-360*, 420, 480) N (Back to  
the beginning)  
* The value is selectable from 1 to 6 hours in 5-minute intervals by  
pressing D E repeatedly after selecting AFR60–FR360B. To change the  
value in 30-minute intervals, press and hold D E.  
For details on the recording mode, see the right column.  
5 Press R on the unit to start recording. Or while holding R, press  
I on the remote control.  
The DVD recording lamp lights up on the unit.  
6 Press R and W on the remote control simultaneously to pause  
recording.  
To resume recording, press R and I simultaneously.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
BASIC OPERATIONS ON DVD DECK  
EN  
35  
Instant Timer Recording (ITR)  
Recording Features  
This easy method lets you record for 30 minutes to 6 hours  
(selectable in 30-minute intervals), and shuts the unit off after  
recording is finished.  
1 Press R on the unit to start recording.  
2 Press R again to engage the ITR mode.  
Turn on the unit.  
On the front display panel, A0:30B appears.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Press DV/HDD/DVD SELECT on the unit repeatedly or DVD  
on the remote so that the DVD lamp lights up on the unit.  
3 If you want to record for more than 30 minutes, press R to  
extend the time. Each press extends recording time by 30  
minutes.  
NOTES:  
You can only perform ITR using the R button on the unit.  
ITR is not possible during timer recording.  
When the recording capacity becomes full during timer recording  
or Instant Timer Recording, the unit automatically performs  
ARelief RecordingB (A pg. 48).  
DV/HDD/DVD  
SELECT  
Watch Another Programme While Recording On The  
Unit  
DVD lamp  
R
While recording is going on, you can watch another programme on  
the TV by using the TV’s tuner.  
CABLE/SAT  
TV  
DVD  
NOTE:  
TV AV / VIDEO  
It is required that the remote control is set to be able to operate the  
TV in advance. (A pg. 68)  
DVD  
1 During recording, press TV AV/VIDEO to select TV mode.  
Video mode is disengaged, and the VIDEO indicator on the  
front display panel lights off.  
PR+/-  
VIDEO indicator lights off.  
The programme received on the TV’s tuner is displayed on the  
TV screen.  
2 Slide the TV/CABLE/SAT/DVD switch to TV.  
3 Press PR +/– repeatedly to select the desired channel.  
REMAIN  
DISPLAY  
Elapsed Recording Time And Disc Remaining Time  
Indication  
During recording, press DISPLAY repeatedly until the desired  
indication appears on the front display panel.  
Each time you press DISPLAY, the time indication changes as  
follows:  
Elapsed recording time N Disc remaining time N Clock N (Back  
to the beginning)  
You can also check the disc remaining time by pressing REMAIN  
while the unit is stopped or recording is in progress. The list of  
disc remaining times for all recording modes appears on the TV  
screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
BASIC OPERATIONS ON DVD DECK  
EN  
36  
Free Rate Function  
Receiving Stereo And Bilingual Programmes  
Your unit is equipped with a Digital stereo sound decoder (NICAM)  
making reception of stereo and bilingual broadcasts possible.  
When the channel is changed, the type of broadcast being  
received will be displayed on the TV screen for a few seconds.  
To record the entire programme, the unit automatically sets the  
appropriate recording mode depending on the combination of the  
total time of the programme to be recorded and either the  
remaining disc space or the specified recording time (from 60  
minutes to 480 minutes).  
Type of Broadcast Being  
On-Screen Display  
Received  
8 To record the entire programme within the actual remaining  
disc space (DVD deck only)  
Select AFR (JUST)B in a recording mode selection procedure.  
Note that this function is available only for timer programming  
recording (A pg. 46, 48) and dubbing from HDD to DVD  
(A pg. 58).  
Regular Monaural  
NICAM Stereo  
NICAM Bilingual  
NICAM Monaural  
NOTES:  
8 To record the entire programme by specifying the desired  
recording time  
Select AFR60–FR360B, AFR420B or AFR480B in a recording mode  
selection procedure. (A pg. 34, 37, 46, 48)  
ASUPERIMPOSEB must be set to AAUTOB. Otherwise the on-  
screen displays will not appear. (A pg. 73)  
If the quality of stereo sound being received is poor, the  
broadcast might be received in monaural with better quality.  
8 To record a 25-min. long daily programme five times just on  
the same DVD disc for example  
Perform AVIDEO Plus+ Timer ProgrammingB (A pg. 46)  
procedure. Be sure to set the recording mode to AFR125B and set  
Weekly/Daily Rec Function to AMON-FRIB in step 8 to fit the total  
recording time to the whole disc space.  
Selection Of The Audio Channel To Be Recorded On A  
Disc  
When a programme is recorded on a DVD-RAM or DVD-RW disc in  
recorded on the disc. When you record a programme on a DVD-R  
or DVD-RW disc in video mode, select the desired audio channel  
(ANICAMB or AMONOB) to be recorded on the disc. (A pg. 72)  
A: 1st  
B: 2nd  
Blank  
C: 3rd  
D: 4th  
E: 5th  
NOTE:  
Before playing back a programme recorded in stereo, or a bilingual  
programme, refer to AAudio Channel SelectionB (A pg. 28).  
When the same programme is recorded in SP mode instead of in  
AFR125B, the 5th programme cannot be recorded.  
A: 1st  
B: 2nd  
C: 3rd  
Blank  
D: 4th  
E: Blank (20 min.)  
NOTES:  
You can programme this unit to timer record, regardless of the  
disc remaining time. When the disc remaining time is not enough,  
the unit performs ARelief RecordingB (A pg. 48). To avoid this,  
make sure of the disc remaining time before setting timer  
programming.  
(Example) If you programmed to timer record for 60 minutes in  
SP mode on a 120-minute disc, the disc remaining time would be  
30 minutes in XP mode, 60 minutes in SP mode, 120 minutes in  
LP mode, 180 minutes in EP mode, and 240 minutes in FR480  
mode. Timer recording will not complete beyond these remaining  
times.  
The maximum recording time of FR (JUST) mode is the same as  
the recording time of FR480 mode. When timer programming a  
long programme in FR (JUST) mode on a disc whose remaining  
time is short, it is recommended to check the disc remaining time  
in FR480 mode to see if the remaining time is enough for the  
programme.  
Even if more than one programme are timer programmed in FR  
(JUST) mode, only the first one is recorded.  
In order to ensure that the recording fits on the disc, this feature  
may leave a slight non-recorded section at the end of the disc.  
There may be some noise and sound disturbance at the point on  
the disc where the unit switches the mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
BASIC OPERATIONS ON HDD DECK  
EN  
37  
NOTES:  
Continuous recording for over 48 hours is not possible.  
It is not possible to record on both DVD and HDD simultaneously.  
It is not possible to record from this unit’s built-in tuner to the DV  
deck.  
Basic Recording  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Pause recording on HDD deck  
It is not possible to pause recording. Pressing W initiates Live  
Memory Playback.  
However, it is still possible to pause recording only when recording  
the channels of external sources (AL-1B, AL-2B, AF-1B, and ADVB).  
While holding R, press W on the remote control. To resume  
recording, while holding R, press I on the remote control.  
No operation can be made with the buttons on the unit.  
ATTENTION:  
The HDD on the unit requires approximately 20 seconds to start  
up after the unit has been turned on, during which no operation  
can be made.  
DV/HDD/DVD  
REC MODE  
HDD lamp  
SELECT  
Recording Mode  
MPEG2 format is used as recording format. As a guide for picture  
quality, the AbpsB unit is used to represent how much data can be  
recorded per second. The larger this value is, the better the picture  
quality becomes but more capacity is required for the recording.  
Select XP or SP for programmes where quick movement occurs,  
such as sports programmes, and LP or EP for talk shows, etc. with  
relatively less movement.  
PR +/-  
R
o
CABLE/SAT  
TV DVD  
Recording mode  
Maximum recording time (approx.)  
XP  
SP  
53 hours  
109 hours  
218 hours  
328 hours  
473 hours  
HDD  
LP  
0-9  
EP  
PR+/-  
FR480  
For details on FR mode, refer to AFree Rate FunctionB  
(A pg. 36).  
ENTER  
NOTE:  
The maximum recording time stated in the above table are the  
approximate time under unused condition.  
I
o
R
W
REC MODE  
1 Press DV/HDD/DVD SELECT on the unit repeatedly or HDD on  
the remote control so that the HDD lamp lights up on the unit.  
2 Press PR +/– or the number keys to select the channel you  
wish to record.  
3 Press REC MODE repeatedly to select the recording mode,  
then press ENTER.  
Each time you press REC MODE, the recording mode changes  
as follows:  
XP N SP N LP N EP N FR (60-360*, 420, 480) N (Back to  
the beginning)  
* The value is selectable from 1 to 6 hours in 5-minute intervals by  
pressing D E repeatedly after selecting AFR60–FR360B. To change  
the value in 30-minute intervals, press and hold D E.  
For details on the recording mode, see the right column.  
4 Press R on the unit to start recording. Or while holding R, press  
I on the remote control.  
The HDD recording lamp lights up on the unit.  
5 Press o twice to stop recording.  
Pressing o once displays the confirmation message to stop  
recording. Press o again to terminate recording.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
BASIC OPERATIONS ON HDD DECK  
EN  
38  
Watch Another Programme While Recording On The Unit  
While recording is going on, you can watch another programme on  
the TV by using the TV’s tuner.  
Recording Features  
Turn on the unit.  
NOTE:  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Press DV/HDD/DVD SELECT on the unit repeatedly or HDD  
on the remote so that the HDD lamp lights up on the unit.  
It is required that the remote control is set to be able to operate the  
TV in advance. (A pg. 68)  
1 During recording, press TV AV/VIDEO to select TV mode.  
Video mode is disengaged, and the VIDEO indicator on the  
front display panel lights off.  
DV/HDD/DVD  
HDD lamp  
VIDEO indicator lights off.  
SELECT  
The programme received on the TV’s tuner is displayed on the  
TV screen.  
PR +/-  
R
CABLE/SAT  
TV DVD  
2 Slide the TV/CABLE/SAT/DVD switch to TV.  
TV AV / VIDEO  
3 Press PR +/– repeatedly to select the desired channel.  
HDD  
Elapsed Recording Time And Disc Remaining Time  
Indication  
During recording, press DISPLAY repeatedly until the desired  
indication appears on the front display panel.  
Each time you press DISPLAY, the time indication changes as  
follows:  
PR+/-  
Elapsed recording time N Disc remaining time N Clock N (Back  
to the beginning)  
You can also check the disc remaining time by pressing REMAIN  
while the unit is stopped or recording is in progress. The list of  
disc remaining times for all recording modes appears on the TV  
screen.  
REMAIN  
Receiving Stereo And Bilingual Programmes  
DISPLAY  
Your unit is equipped with a Digital stereo sound decoder (NICAM)  
making reception of stereo and bilingual broadcasts possible.  
When the channel is changed, the type of broadcast being  
received will be displayed on the TV screen for a few seconds.  
Type of Broadcast Being  
On-Screen Display  
Received  
Instant Timer Recording (ITR)  
This easy method lets you record for 30 minutes to 6 hours  
(selectable in 30-minute intervals), and shuts the unit off after  
recording is finished.  
Regular Monaural  
NICAM Stereo  
NICAM Bilingual  
NICAM Monaural  
1 Press R on the unit to start recording.  
NOTES:  
2 Press R again to engage the ITR mode.  
ASUPERIMPOSEB must be set to AAUTOB. Otherwise the on-  
screen displays will not appear. (A pg. 73)  
If the quality of stereo sound being received is poor, the  
broadcast might be received in monaural with better quality.  
On the front display panel, A0:30B appears.  
3 If you want to record for more than 30 minutes, press R to  
extend the time. Each press extends recording time by 30  
minutes.  
NOTES:  
You can only perform ITR using the R button on the unit.  
ITR is not possible during timer recording.  
When the recording capacity becomes full during timer recording  
or Instant Timer Recording, the unit is automatically shut off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
BASIC OPERATIONS ON HDD DECK  
EN  
39  
Basic Playback  
Playback Features  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Press HDD so that the HDD lamp lights up on the unit.  
DV/HDD/DVD  
SELECT  
CABLE/SAT  
I
TV  
DVD  
HDD  
o
W
MARK  
CABLE/SAT  
TV DVD  
HDD  
I
S
T
O/SLOW  
-
N/SLOW +  
W
o
v
w
JUMP  
-
JUMP +  
ON SCREEN  
ENTER  
I
o
W
Variable Speed Search  
During playback, press N for forward variable speed search, or  
O for reverse variable speed search.  
DISPLAY  
Each press of the button increases the search speed for each  
direction.  
To resume normal playback, press I.  
Reverse  
O
N
Forward  
Reverse  
Slow Motion  
3 steps  
ATTENTION:  
Reverse Search Reverse  
Normal  
Play  
Slow Motion  
3 steps  
ForwardSearch  
5 steps  
It may take a few seconds to start playback. This is not a  
malfunction.  
4 steps  
Play  
1
116  
Forward/reverse high-speed search and other operations  
cannot be performed while playback is stopped.  
-
½
-
¼
-
60  
15  
-60 -15 -5 -3  
-1  
1
1.5  
3
5
½
¼
16  
NOTE:  
1 Press DV/HDD/DVD SELECT on the unit repeatedly or HDD on  
You can hear the (normal) audio track only during 1.5x speed  
search.  
the remote so that the HDD lamp lights up on the unit.  
2 Press I to start playback.  
Still Picture/Frame-By-Frame Playback  
The Library Database Navigation also enables you to search  
and select the desired programmes. (A pg. 52)  
1 Press W to pause during playback.  
3 Press W to pause playback.  
2 Press SLOW – (O) or SLOW + (N) to activate frame-by-  
To resume normal playback, press I.  
frame playback.  
4 Press o to stop playback.  
Each press of SLOW – (O) or SLOW + (N) advances/  
reverses the still picture frame by frame.  
To resume normal playback, press I.  
NOTES:  
When the Library Database Navigation screen appears, choose  
a thumbnail image of the desired title on the TV screen, then  
press ENTER. (A pg. 52)  
Slow Motion  
During HDD playback, the current title elapsed time is displayed  
on the TV screen when ON SCREEN is pressed. However, each  
press of DISPLAY changes the time display on the front display  
panel as follows:  
Current title elapsed time N Disc remaining time N Current title  
remaining time N (back to the beginning)  
1 Press W to pause during playback.  
2 Press SLOW – (O) or SLOW + (N) for 2 or more seconds.  
Each press of SLOW – (O) or SLOW + (N) increases the  
slow motion speed for each direction.  
It is possible to play back on the DV deck and the HDD/DVD deck  
simultaneously. However, either DVD or HDD can be played at  
the same time.  
Skip Search  
During playback, press v.  
Each press initiates an approximately 30-second period of fast-  
motion playback. Normal playback resumes automatically.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
BASIC OPERATIONS ON HDD DECK  
EN  
40  
One Touch Replay  
Marking Positions To Play Back Again Later  
It is possible to mark positions (up to 999 points) where you want to  
play back once again later, and start playback from a marked  
position. Marking onto the disc when recording is helpful to locate  
a start point when you play back the disc later.  
You can move back the playback position slightly.  
Press w.  
Each press skips back for approximately 7 seconds and resumes  
playback.  
Pressing while paused skips back for approximately 7 seconds  
and resumes pause.  
To mark positions:  
During playback, press MARK at  
positions you want to mark.  
AMARKB appears on the TV screen.  
You can easily locate the marked  
positions using S or T when  
you play back the disc.  
1.5x Speed Playback  
You can play back a title quickly. The sound will also be played  
back faster than normal speed during 1.5x speed playback.  
1.5x speed playback cannot be performed during recording on  
HDD or DVD.  
To delete the marked positions:  
While paused, press S or T to  
locate a marked position you want to  
delete, then press MARK.  
Crossed AMARKB appears on the  
TV screen, and the marked position  
is deleted.  
1 Press O to locate the point to start 1.5x speed playback from.  
2 Press I to resume playback.  
3 Press N once.  
Pressing ON SCREEN displays AX1.5B on the top right corner  
of the screen.  
NOTE:  
NOTE:  
When the unit is connected with a digital audio device using an  
optional optical cable, set ADIGITAL AUDIO OUTB to APCM ONLYB.  
(A pg. 28)  
When a monaural programme changes to a stereo programme  
while recording, a mark signal is automatically recorded.  
Jump Search  
You can locate a scene ahead or behind the current one by  
jumping scenes according to selected time intervals (A pg. 73)  
during playback (or Live Memory Playback).  
Press JUMP – or JUMP +.  
To advance forward or back, press JUMP – or JUMP +  
repeatedly within 5 seconds of each press to continue jump.  
Depending on the time from where you want to start jump search,  
the first press of JUMP – or JUMP + will not necessarily lead to a  
jump of the selected time interval. The first press will lead to a  
jump to the nearest quarter points of an hour (15 min/ 30 min/ 45  
min/ 00 min). The subsequent jumps will then be in accordance  
to the selected time interval.  
When you cannot advance any further (beginning or end of  
programme reached), the message AUNABLE TO GO BACK  
ANY MOREB appears on the screen and the on-air screen  
resumes. In such a case, press S, O or o.  
Example:  
Playback search when jump interval is set to 15 MIN jumps.  
Taking for instance, you want to start jump search 40 minutes after  
the beginning of the programme. Pressing JUMP – or JUMP + will  
result in a jump to the scene at the 30 minutes point or 45 minutes  
point respectively as illustrated below. At the subsequent press, the  
scene will jump to the 15 minutes point or 1 hour point respectively,  
according to the selected time interval, which in this case is A15  
MINB.  
Time counter  
40 min  
0 min  
1 h 15 min  
30 min  
15 min  
45 min  
1 h  
Beginning of programme  
Current scene  
End of programme  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
BASIC OPERATIONS ON DV DECK  
EN  
41  
1 Load a cassette. Make sure the window side is up, the rear  
label side is facing you and the arrow on the front of the  
cassette is pointed toward the unit.  
Basic Playback  
Do not apply too much pressure when inserting.  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
If the erase protection switch is set to ASAVEB, playback begins  
automatically. It takes about 15 seconds until the playback  
picture appears. However, when APOWER SAVEB is set to  
AONB (A pg. 73), playback will not begin automatically even  
though a cassette with its erase protection switch set to  
ASAVEB is inserted.  
DV/HDD/DVD  
DV lamp  
I
N
SELECT  
The unit’s power comes on automatically.  
2 Press DV/HDD/DVD SELECT on the unit repeatedly or DV on  
the remote control so that the DV lamp lights up on the unit.  
3 Find the programme start point. If the tape is advanced past the  
start point, press O. To go forward, press N.  
4 Press I to start playback.  
O
o
M
5 Press o to stop playback.  
To eject the cassette, press M (DV).  
CABLE/SAT  
TV  
DVD  
Clean the video heads using a dry cleaning cassette  
- M-DV12CL - when:  
No picture during playback.  
DV  
Block noise appears during playback.  
AUSE CLEANING CASSETTEB appears on the screen.  
NOTE:  
The heads get dirty in the following cases:  
in an environment prone to extreme temperature or humidity  
in a dusty environment  
flaw, dirt or mould on video tapes  
continuous usage for a long time  
I
Usable cassettes  
Cassettes marked P can be used with the DV deck.  
O
o
N
NOTES:  
This unit does not support playback of DV tapes with HD format  
recordings.  
When you record a tape on the DV deck with the recording speed  
set to ALPB, it is recommended to play back that tape back on this  
DV deck. Digital video recorder from other manufacturers may not  
be able to play back the tape properly.  
It is possible to play back on the DV deck and the HDD/DVD deck  
simultaneously. However, either DVD or HDD can be played at  
the same time.  
Accidental erasure prevention  
To prevent accidental recording on a recorded cassette, set its  
erase protection switch to ASAVEB. To record on it later, set the  
switch to ARECB.  
Erase protection switch  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
BASIC OPERATIONS ON DV DECK  
EN  
42  
Skip Search  
Playback Features  
During playback, press v.  
Each press initiates an approximately 30-second period of fast-  
motion playback. Normal playback resumes automatically.  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Press DV/HDD/DVD SELECT on the unit repeatedly or DV on  
the remote so that the DV lamp lights up on the unit.  
One Touch Replay  
During playback, press  
w. The unit rewinds the picture a little (about  
7 seconds) and resumes playback.  
Next Function Memory  
CABLE/SAT  
The Next Function Memory AtellsB the unit what to do after rewinding.  
TV  
DVD  
Before continuing, make sure the unit is in the Stop mode.  
DV  
For Automatic Start Of Playback  
1
Press O, then press I within 2 seconds.  
Soundtrack Selection  
Your unit is capable of recording two soundtracks (L and R) and will  
play back the one you select.  
During Playback  
Pressing AUDIO changes the soundtrack as follows:  
TRACK  
USE  
I
N
On-Screen Display  
O
L W X R  
L W  
For main audio of Bilingual tapes  
For sub audio of Bilingual tapes  
W
DISPLAY  
AUDIO  
X R  
To select the audio mode (SOUND1/SOUND2/MIX), refer to  
AAUDIO MODEB under ADV SET UPB (A pg. 72).  
NOTE:  
For instructions on recording stereo and bilingual programmes,  
refer to page 36.  
ATTENTION:  
Time Code  
In the search, still, slow-motion or frame-by-frame playback  
mode, a slight mosaic effect appears on screen.  
During recording, a time code is recorded on the tape. This time  
code is used to confirm the position on the tape when playing back  
or editing a tape.  
Variable Speed Search  
During playback, press N for forward variable speed search, or  
O for reverse variable speed search.  
Each press of the button increases the search speed for each  
direction.  
To resume normal playback, press I.  
1 Press DISPLAY until the time code on the tape appears on the  
front display panel and the TV screen.  
Each time you press DISPLAY, the indication changes as  
follows:  
Clock time N Time code N Tape remaining time N (Back to the  
beginning)  
Reverse  
O
N
Forward  
Reverse  
Slow Motion  
1 step  
Reverse Search  
3 steps  
Slow Motion  
1 step  
ForwardSearch  
3 steps  
Normal Play  
1
-
1
5
-
12  
-
-
1
2
4
12  
4
2
5
Still Picture/Frame-By-Frame Playback  
1 Press W to pause during playback.  
2 Press W to activate frame-by-frame playback.  
To resume normal playback, press I.  
Slow Motion  
1 Press W to pause during playback.  
2 Press and hold W for 2 seconds, then release. Press W and  
release again to return to still picture.  
Press N for forward slow motion or O for reverse slow  
motion.  
To resume normal playback, press I.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
LIVE MEMORY PLAYBACK ON HDD/DVD DECK  
Recording/playback Status Display  
CABLE/SAT  
EN  
43  
Live Memory Playback  
TV  
DVD  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Press DV/HDD/DVD SELECT on the unit repeatedly to select  
the HDD or DVD deck.  
LIVE  
NAVIGATION  
Press NAVIGATION to display Library Database  
This unit records pictures onto the hard disk and DVD-RAM disc,  
instead of video tapes, then plays back the pictures recorded on  
the disc. This makes it possible to achieve high-speed writing and  
read-out that has not been possible with conventional VCRs,  
enabling recording and playback simultaneously.  
Navigation menu, then choose a programme to play  
back. (A pg. 51)  
o
R
ON SCREEN  
High-speed spin  
Live Memory Playback status can be checked by  
pressing ON SCREEN to display the bar meter on  
the superimpose display. The current status is  
superimposed on the TV screen. (A pg. 16, AWhen  
using Live Memory playbackB)  
Recording  
(High-speed writing)  
Playback  
(High-speed read-out)  
LIVE CHECK  
It is called ALive Memory PlaybackB to start playback of the  
programme being recorded, with a time-lag between a recording  
point and a playback point, as shown in the figure below.  
NOTES:  
Live Memory Playback could be performed approximately 30  
seconds after recording has started on the DVD-RAM disc.  
However, for HDD, Live Memory Playback is possible right after  
recording has started.  
Current playback point  
(Live Memory Playback)  
Although high-speed search up to approximately 30 seconds  
before the current recording point is possible during Live Memory  
Playback, once the current recording point is reached, the unit  
resumes normal playback and maintains a delay of approximately  
When using Live Memory Playback during timer recording,  
playback continues even after the end of the recording.  
When using Live Memory Playback during timer recording on the  
DVD-RAM disc, the next timer recording will be recorded to the  
HDD deck even though recording on the DVD deck has stopped.  
(A pg. 48, ARelief RecordingB)  
Current recording position  
Recording start point  
(Recording point)  
Recording  
continues  
Playback  
continues  
0
1 hour  
30 min.  
Currently elapsed recording time  
It is impossible to perform ITR even if you press R on the unit  
during Live Memory Playback while in normal recording or  
RetroActive Recording. (A pg. 38)  
Press o to display the programme being recorded, then perform  
ITR settings.  
Not only can this unit play back a programme previously recorded  
while recording or timer recording another programme, but the unit  
also allows you to play back from the beginning of a programme  
while continuing to record the same programme.  
It is possible to perform ITR during Live Memory Playback while  
in temporary recording for Live Memory (HDD deck only). Press  
R to stop Live Memory Playback and activate normal recording,  
then perform ITR settings.  
It is impossible to perform ITR during Live Memory Playback  
while in timer recording.  
Playback may be paused for a moment during Live Memory  
Playback, which does not interfere with recording.  
Live Memory Playback cannot be performed while recording the  
source from DV input. (A pg. 61, ADV Dubbing (HDD & DVD  
Deck Only)B)  
When LIVE CHECK is pressed to display the picture currently  
being recorded, the picture size may not be correct.  
Press o or LIVE to stop Live Memory Playback.  
Live Memory Playback cannot be performed while the DVD deck  
is recording as temporary recording on HDD stops during  
recording on DVD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
LIVE MEMORY PLAYBACK ON HDD/DVD DECK  
EN  
44  
F N  
Buttons To Be Used During Live Memory Playback  
Each press of the button during playback advances the  
playback speed in 4 steps in the forward direction.  
Available only when paused  
Each press of the button advances the still picture frame by  
frame.  
Pressing down for 2 or more seconds advances playback at 1/  
16 times the normal speed. Then, each press of the button  
advances slow-motion at 1/16 times, 1/4 times and 1/2 times  
the normal playback.  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Press HDD or DVD to select the desired deck for Live Memory  
Playback.  
CABLE/SAT  
G o  
TV  
DVD  
Pressing once during Live Memory Playback or RetroActive  
Recording returns to the screen on air.  
Pressing twice during recording stops recording and returns to  
the screen on air.  
HDD  
DVD  
H W  
Pressing once pauses playback (still picture playback).  
Pressing repeatedly advances the still picture frame by frame.  
I JUMP –  
A
Each press of the button during Live Memory Playback jumps  
back for the selected time interval and resumes playback.  
(A pg. 40, AJump SearchB)  
B
J JUMP +  
C
D
Each press of the button during Live Memory Playback jumps  
forward for the selected time interval and resumes playback.  
(A pg. 40, AJump SearchB)  
E
G
F
H
K v  
I
J
K
L
It is useful when skipping over unwanted sections.  
Pressing once skips forward for approximately 30 seconds and  
resumes playback.  
Pressing repeatedly skips forward continuously as many times  
as pressed.  
M
L w  
It is useful when watching sports programmes, etc.  
Each press skips back for approximately 7 seconds and  
resumes playback.  
Pressing repeatedly skips back for approximately 7 seconds  
continuously as many times as pressed.  
A LIVE  
Returns to on air programme screen. When a confirmation  
message appears by pressing this button during timer  
programming or title editing, etc., follow the instruction to return  
to the previous screen.  
M LIVE CHECK  
B NAVIGATION  
You can check, for example, if the programme you are recording  
has already finished.  
Pressing once displays the picture currently being recorded and  
the one being played back simultaneously.  
Pressing successively clears the Live Check window and  
displays only the picture currently being played back.  
Displays Library Database Navigation menu. You can choose a  
title to play back.  
C S  
Pressing once skips back to the beginning of the chapter being  
played back.  
Pressing down for 2 or more seconds during playback reverses  
playback at 5 times the normal speed while pressed. Releasing  
the button resumes normal playback.  
Available only when paused  
Pressing down for 2 or more seconds reverses playback at 1/16  
times the normal speed.  
D T  
Pressing once skips forward to the beginning of the next  
chapter being played back.  
Pressing down for 2 or more seconds during playback  
advances playback at 5 times the normal speed while pressed.  
Releasing the button resumes normal playback.  
Available only when paused  
Pressing down for 2 or more seconds advances playback at 1/  
16 times the normal speed.  
E O  
Each press of the button during playback advances the  
playback speed in 5 steps in the reverse direction.  
Available only when paused  
Each press of the button reverses the still picture frame by  
frame.  
Pressing down for 2 or more seconds reverses playback at 1/16  
times the normal speed. Then, each press of the button  
reverses slow-motion at 1/16 times, 1/4 times and 1/2 times the  
normal playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
LIVE MEMORY PLAYBACK ON HDD/DVD DECK  
EN  
45  
Temporary recording for Live Memory (HDD deck only) Simultaneous Recording and Playback  
This unit automatically records the channel being received, within  
the specified range of time, to the reserved space on the hard disk.  
The time range can be set for 30 minutes, 1 hour, and 3 hours.  
(A pg. 72)  
You can play back the previous part of the channel you are  
recording or other programmes available in the Library Database.  
1 Press NAVIGATION. The Library Database Navigation screen  
appears.  
NOTE:  
2 Press selection keys to select AORIGINALB, then press  
Previous temporary recordings will be overwritten since the unit is  
always recording the channel being received. Thus, it is not  
possible to play back TV programmes recorded beyond the  
specified range of time since they are already overwritten. To avoid  
this in order to save titles, perform normal recording (A pg. 37),  
timer recording (A pg. 46, 48), or RetroActive Recording (See  
below).  
ENTER.  
3 Press selection keys to select the desired title, then press  
ENTER.  
For DVD-RAM, playback starts from the beginning of the title if  
ACONTINUOUS PLAYB in ADVD SET UPB is set to AONB  
(A pg. 72).  
4 Press selection keys to select the desired playback method  
(ABEGINNINGB, ARESUMEB or AREPEATB), then press  
ENTER.  
About limitation on temporary recording  
The temporary recording for Live Memory is cancelled in the  
following cases, and will start all over again when it is to resume.  
When the power is turned off  
When the system is powered again after a power failure was  
occurred  
When normal recording, timer recording, RetroActive  
Recording, or Automatic Satellite Programme Recording  
(A pg. 50) is performed  
When the ALIVE MEMORYB setting is changed (A pg. 72)  
When tuner channel setting is performed (A pg. 74)  
When dubbing is performed by pressing DUBBING (A pg. 58)  
Playback of the selected title begins automatically.  
5 Press o to stop playback.  
The on-air screen resumes.  
NOTES:  
You can use various playback features during Live Memory  
Playback.  
To stop simultaneous playback, press o. The on-air screen  
resumes. To stop actual recording, press o twice again.  
You can move back the playback position slightly during recording  
or Live Memory Playback.  
Press w.  
RetroActive Recording (HDD deck only)  
You can start recording from the previous part of the channel you  
are currently watching (temporarily recorded on the background).  
(See ATemporary recording for Live Memory (HDD deck only)B  
above.)  
8 DVD-RAM  
Pressing once during recording skips back for approximately 30  
seconds and starts Live Memory Playback. While pressing once  
during Live Memory Playback skips back for approximately 7  
seconds and resumes playback.  
1 Press S or O to locate the point to start recording from.  
Each press of O increases the reverse search speed.  
Each subsequent press skips back for approximately 7 seconds  
and resumes playback.  
Pressing while paused skips back for approximately 7 seconds  
and resumes pause.  
2 Press R on the unit to start RetroActive Recording. Or while  
holding R, press I on the remote control.  
3 Press o twice to stop RetroActive Recording.  
The on-air screen resumes.  
8 HDD  
Pressing during recording skips back for approximately 7  
seconds and starts Live Memory Playback. While pressing during  
Live Memory Playback skips back for approximately 7 seconds  
and resumes playback.  
Each press skips back for approximately 7 seconds and resumes  
playback.  
NOTES:  
You cannot use RetroActive Recording for channels other than  
the channel you are currently watching.  
Recording speed is automatically set to FR65 mode when  
RetroActive Recording is started.  
Temporarily recorded data prior to the beginning of RetroActive  
Recording is erased when RetroActive Recording started.  
Pressing while paused skips back for approximately 7 seconds  
and resumes pause.  
Resuming Playback (HDD deck only)  
You can resume playback of a TV broadcast you were recording or  
watching from the point you have paused.  
1 Press W to pause a TV broadcast.  
Recording continues when recording.  
2 Press I to start Live Memory Playback.  
Playback resumes from the paused position.  
3 Press o to resume the on-air screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
TIMER RECORDING ON HDD/DVD DECK  
EN  
46  
7 The PlusCode number you entered and the matching timer  
recording information are displayed on the TV screen. Check  
the programme data.  
VIDEO Plus+ Timer Programming  
You can programme this unit to timer record as many as 16  
programmes.  
To cancel this setting, press RETURN.  
With the VIDEO Plus+ system, timer programming is greatly  
simplified because each TV programme has a corresponding code  
number which your unit is able to recognise.  
IMPORTANT:  
Make sure the channel position number you wish to record is  
and set the Guide Programme number correctly.  
You can use the remote control to enter the PlusCode number.  
Make sure that the unit’s built-in clock is set properly.  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
then press ENTER.  
AINPUT TITLEB (A pg. 52, AModify Title NameB)  
ACATEGORYB (A pg. 53, AModify CategoryB)  
AVPS/PDCB (A pg. 47, AVPS/PDC RecordingB)  
AWEEKLY/DAILYB (A pg. 47, AWeekly/Daily RecordingB)  
AREC MODEB (A pg. 34, ARecording ModeB)  
CABLE/SAT  
TV  
DVD  
9 Press selection keys to select AOKB, then press ENTER to  
access the Programme Confirmation screen.  
0 – 9  
10Press selection keys to select AEXITB, then press ENTER to  
complete timer programming.  
To programme another timer, press selection keys to select  
ACONTINUEB, then press ENTER.  
PROGRAMME  
If APROGRAMME OVERLAPPEDB appears on the TV screen,  
delete or modify the programmes.  
ENTER  
Selection Keys  
FGDE  
NOTES:  
RETURN  
There may be cases that the VIDEO Plus+ Timer Programming  
function prolongs the stop time of the programming.  
When two successive programmes are recorded on a DVD-RW  
disc with the VIDEO Plus+ Timer Programming function, the  
beginning of the second one may be left off the recording.  
If the copy limited programme is received during timer recording,  
the unit enters Record Pause mode. Recording starts again if it is  
switched to a recordable broadcast during the time you  
programmed.  
DISPLAY  
VPS/PDCj  
If you have moved to a different area or if a broadcasting  
station’s channel number has been changed, the wrong channel  
number will be displayed on the VIDEO Plus+ programme  
screen in step 7. When this happens, set the correct Guide  
Programme number for that station. (A pg. 74, AVIDEO Plus+  
System SetupB)  
1 Load a recordable disc if recording to DVD.  
2 Press PROGRAMME to access the programme top screen.  
3 Press selection keys to select AVIDEO PLUS+B, then press  
ENTER.  
When APROGRAMME FULL DELETE UNWANTED TIMER  
PROGRAMMESB appears on the TV screen, you need to  
cancel some of the reserved programmes. (A pg. 49)  
4 Press the number keys to  
1
23  
PROGRAMME > VIDEO PLUS+ (1/2)  
enter the PlusCode number of  
a programme you wish to  
record.  
PLUSCODE NO.  
1 2 3 4  
SELECT WITH @  
THEN PRESS [ENTER]  
1
4
2
5
8
0
3
6
OR  
PRESS [PROGRAMME]  
TO EXIT  
7
9
DELETE  
DELETE ALL  
Press selection keys to select  
the desired number key on the  
screen, then press ENTER.  
Repeat to enter all required  
numbers.  
RECORD TO  
DVD  
PROGRAMME  
EXIT  
ENTER  
CONFIRM  
SELECT  
If you have made a mistake, press selection keys to select  
ADELETEB or ADELETE ALLB, then press ENTER and input the  
correct number before you press ENTER again.  
5 Press selection keys to select ARECORD TOB, then press  
ENTER. Press selection keys to select the desired recording  
deck, then press ENTER.  
6 Press selection keys to select ACONFIRMB, then press  
ENTER.  
If the number you entered is invalid, APLUSCODE NO. ERROR  
CONFIRM PLUSCODE NO. THEN RETRYB appears on the TV  
screen. Input a valid PlusCode number.  
If AGUIDE PROGRAMME IS NOT SET SET GUIDE  
PROGRAMME THEN RETRYB appears on the TV screen, set  
Guide Programme Numbers manually. (A pg. 74)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
TIMER RECORDING ON HDD/DVD DECK  
EN  
47  
Weekly/Daily Recording  
You can record programmes with one of the following weekly/daily  
timer settings.  
VPS/PDC Recording  
Now available from some TV stations, PDC (Programme Delivery  
Control) and VPS (Video Programme System) are services  
designed to assure safe, accurate timer recording. With this  
system, special code signals are transmitted together with the  
audio/video signals. These code signals control your video unit and  
have precedence over the advertised times you may have preset  
into the timer. This means that your unit will start and stop  
recording when the preset TV programmes actually start and  
end^even if the broadcast time of a preset TV programme is  
changed from what has been advertised. PDC is currently  
available nationally on BBC1, BBC2, Ch.4 and Ch.5, except from a  
few small relay transmitters. Ch.3 operates a PDC service in some  
areas. All channels intend to offer this service in due course.  
Check your TV programme listing guide for latest information. If the  
channel you intend to record does not offer a PDC service your unit  
will not start recording if PDC has been selected. Be sure to set  
PDC to AOFFB if PDC is not available on your selected channel.  
(See step 8 on page 46.)  
For the HDD deck  
When you select a mode other than ONCE, the space on the hard  
disk drive is saved for new recordings by overwriting previous  
recordings. To prevent loss of a needed recording, backup  
programmes you wish to save by dubbing them to DVD discs  
before overwriting previous recordings. Or save the title of weekly/  
daily programmes to avoid overwriting of a previous week/day.  
(A pg. 49)  
ONCE (One Time Recording)  
In this mode a programme will not be automatically overwritten.  
WEEKLY (OVERWRITE) (Weekly Recording/Weekly Overwrite)  
When the set weekly programme is broadcast, the programme  
recorded last week is automatically deleted and overwritten by  
the new programme. Save the title of each programme you wish  
to save, then the recorded programme is saved and will not be  
overwritten by the new programme.  
NOTES:  
Make sure to press VPS/PDCj after completing timer  
programming procedure to activate the VPS/PDC recording  
function. The VPS/PDC recording indicator lights up on the front  
display panel when VPS/PDC recording function is activated.  
However, it will blink rapidly when VPS/PDCj is pressed under  
the following conditions:  
This week’s drama  
Overwritten  
Last week’s drama  
Clock is not set.  
Timer programming has not been set.  
Disc is not loaded.  
HDD is full.  
MON-SUN (FOR A WEEK)/ MON-SAT (FOR A WEEK)/  
MON-FRI (FOR A WEEK) (Daily Recording/Weekly Overwrite)  
When the set weekly programme is broadcast, the programme  
recorded on the same day last week is automatically deleted  
and overwritten by the new programme. Save the title of each  
programme you wish to save, then the recorded programme is  
saved and will not be overwritten by the new programme.  
When you use Manual Timer Programming, set the start time  
(VPS or PDC time) exactly as advertised in the TV listing. A  
different time than advertised will result in no recording.  
VPS/PDC recording is also possible when a satellite receiver or a  
cable system is connected to [L-2 IN/DECODER] connector on  
your unit.  
VPS/PDC recording is also possible via the [L-1 IN/OUT]  
connector.  
When timer recording via VPS/PDC recording is in progress, it is  
not possible to switch between the HDD and DVD deck, and the  
following menus cannot be displayed:  
This  
week  
MON TUE WED THU FRI  
Overwritten  
Last  
MON TUE WED THU FRI  
week  
Main Menu  
Library Database Navigation Menu  
Editing Menu  
If the unit is powered on when set to record a timer programme  
onto HDD/DVD using VPS/PDC, the PDC information will not be  
used. The programme will be recorded using the start and stop  
times originally programmed.  
MON-SUN (OVERWRITE)/ MON-SAT (OVERWRITE)/  
MON-FRI (OVERWRITE) (Daily Recording/Daily Overwrite)  
When the set daily programme is broadcast, yesterday’s  
programme is automatically deleted and overwritten by the new  
programme. Save the title of each programme you wish to save,  
then the recorded programme is saved and will not be  
overwritten by the new programme.  
How to check if the station being received transmits a VPS/  
PDC signal  
A Hold down DISPLAY for about 5 seconds. AVPS/PDCB appears  
and blinks on the front display panel. If a VPS/PDC signal is  
detected from the station, AVPS/PDCB will stop blinking. If no  
VPS/PDC signal is detected from the station, AVPS/PDCB will  
blink at a slower rate.  
Tuesday’s programme  
Overwritten  
Monday’s programme  
B Press DISPLAY again to return to normal display.  
For the DVD deck  
ONCE (One Time Recording)  
WEEKLY (Weekly Recording)  
MON-SUN/ MON-SAT/ MON-FRI (Daily Recording)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
TIMER RECORDING ON HDD/DVD DECK  
EN  
48  
8 Press selection keys to select ATV PROGB, then press ENTER.  
Press selection keys to select the desired channel.  
Manual Timer Programming  
9 Press selection keys to select ACONFIRMB, then press  
You can programme this unit to timer record as many as 16  
programmes.  
ENTER.  
10Set the other recording options as required.  
Refer to step 8 in AVIDEO Plus+ Timer ProgrammingB  
(A pg. 46).  
If you do not know the PlusCode number for the programme you  
wish to record, use the following procedure to set your unit to timer  
record the programme.  
11Press selection keys to  
2
PROGRAMME > CALENDAR PR. (3/3)  
Make sure that the unit’s built-in clock is set properly.  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
select AOKB, then press  
ENTER to access the  
Programme Confirmation  
screen.  
14/01/04 WED 22:30 - 23:00  
GARDENING  
BBC1  
[EDUCATION]  
FR360  
1:00  
28:00  
SELECT WITH @  
THEN PRESS [ENTER]  
INPUT TITLE  
CATEGORY  
VPS/PDC  
GARDENING  
EDUCATION  
OFF  
PRESS [PROGRAMME]  
TO EXIT  
WEEKLY/DAILY  
REC MODE  
MON-FRI (FOR A WEEK)  
FR360  
12Press selection keys to  
select AEXITB, then press  
ENTER to complete timer  
programming.  
PROGRAMME  
EXIT  
ENTER  
CABLE/SAT  
OK  
SELECT  
TV  
DVD  
To programme another timer, press selection keys to select  
ACONTINUEB, then press ENTER.  
If APROGRAMME OVERLAPPEDB appears on the TV screen,  
delete or modify the programmes.  
NOTES:  
PROGRAMME  
When two successive programmes are recorded on a DVD-RW  
disc with Manual Timer Programming function, the beginning of  
the second one may be left off the recording.  
If the copy limited programme is received during timer recording,  
the unit enters Record Pause mode. Recording starts again if it is  
switched to a recordable broadcast during the time you  
programmed.  
ENTER  
Selection Keys  
FGDE  
Satellite Receiver Users  
To timer record a satellite broadcast using Manual Timer  
Programming:  
A Perform AManual Timer ProgrammingB on this page.  
In step 8, set ATV PROGB to AL-2B.  
B Set the satellite receiver to the appropriate channel before  
the selected programme begins.  
C Leave the satellite receiver’s power on.  
1 Load a recordable disc if recording to DVD.  
2 Press PROGRAMME to access the programme top screen.  
3 Press selection keys to select ACALENDAR PR.B, then press  
Relief Recording  
ENTER.  
When a programme that is set for the DVD deck cannot be  
recorded properly, the programme is recorded to the HDD deck  
instead in the recording mode as set.  
When APROGRAMME FULL DELETE UNWANTED TIMER  
PROGRAMMESB appears on the TV screen, you need to  
cancel some of the reserved programmes. (A pg. 49)  
If the remaining capacity of the hard disk is not sufficient, the  
programme is recorded to the DVD deck until the remaining  
capacity of the DVD disc lasts.  
If AJUSTB is selected for the recording mode, the current  
recording mode for the DVD deck is applied.  
4 Press selection keys to select the desired date, then press  
ENTER.  
5 Press selection keys to select  
2
PROGRAMME > CALENDAR PR. (2/3)  
ARECORD TOB, then press  
ENTER. Press selection keys  
to select the desired recording  
deck, then press ENTER.  
14/01/04 WED 22:30 - 23:00  
BBC1  
[MISC.  
]
XP  
SELECT WITH @  
THEN PRESS [ENTER]  
RECORD TO  
START  
HDD  
22:30  
23:00  
BBC1  
PRESS [PROGRAMME]  
TO EXIT  
STOP  
TV PROG  
6 Press selection keys to select  
ASTARTB, then press ENTER.  
Press selection keys to set  
the desired start time, then  
press ENTER.  
PROGRAMME  
EXIT  
ENTER  
CONFIRM  
SELECT  
Each press of F G increases/decreases the start time in 1-  
minute intervals.  
To increase/decrease the start time in 30-minute intervals,  
press and hold F G.  
7 Press selection keys to select ASTOPB, then press ENTER.  
Press selection keys to set the desired stop time, then press  
ENTER.  
Each press of F G increases/decreases the stop time in 1-  
minute intervals.  
To increase/decrease the stop time in 30-minute intervals,  
press and hold F G.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
TIMER RECORDING ON HDD/DVD DECK  
EN  
49  
Check Programmes  
To check the whole list of programmes  
CABLE/SAT  
TV DVD  
1 Press PROGRAMME to access the programme top screen.  
2 Press selection keys to select APROGRAMME LISTB, then  
press ENTER.  
The details of a selected programme appear on the top of the  
screen.  
The daily programme of a title is listed as one programme.  
PROGRAMME  
To check the list of programmes by date  
ENTER  
1 Press PROGRAMME to access the programme top screen.  
Selection Keys  
FGDE  
2 Press selection keys to select ACALENDAR LISTB, then press  
ENTER.  
3 Press selection keys to select the desired date, then press  
ENTER.  
Cancel And Change Programmes  
Repeat steps in ACheck ProgrammesB to select a programme  
before proceeding.  
To cancel the programme  
1 Press selection keys to select ACANCELB, then press ENTER.  
To modify the programme settings  
1 Press selection keys to select AMODIFYB, then press ENTER.  
2 Change the settings of the desired recording options as  
required.  
Refer to steps 4 12 in AManual Timer ProgrammingB  
(A pg. 48).  
To skip the weekly/daily programmes to the next week/day  
It is easy to temporarily cancel weekly/daily programmes of a  
week/day.  
1 Press selection keys to select APROGRAMME SKIPB, then  
press ENTER.  
2 Press selection keys to select ASKIPB, then press ENTER.  
To save the titles of weekly/daily programmes (HDD Deck  
Only)  
Use this function to avoid overwriting titles of weekly/daily  
programmes of a previous week/day.  
1 Press selection keys to select ATITLE SAVEB, then press  
ENTER.  
2 Press selection keys to select ASAVEB, then press ENTER.  
NOTE:  
This function is available only when the remaining capacity of the  
hard disk is sufficient.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
TIMER RECORDING ON HDD/DVD DECK  
EN  
50  
Make sure the satellite receiver is connected to the unit’s [L-2  
IN/DECODER] connector.  
Programme the timer on the satellite receiver.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Automatic Satellite Programme  
Recording  
(HDD Deck Only)  
This function allows you to automatically record a satellite  
1 Press HDD on the remote control to choose the recording deck.  
You can also press DV/HDD/DVD SELECT on the unit  
repeatedly to select the recording deck.  
programme which is timer programmed on your external satellite  
receiver. Connect a satellite receiver to the unit’s [L-2 IN/DECODER]  
connector and programme the timer on the satellite receiver. The unit  
starts or stops recording by the signals input from the satellite  
receiver. After recording, the unit’s power shuts off automatically.  
2 Set AL-2 SELECTB to ASAT VIDEOB or ASAT S-VIDEOB.  
(A pg. 64)  
Also refer to AIMPORTANTB on page 70.  
3 Press REC MODE repeatedly to set the recording mode.  
4 Press and hold SATj for about 2 seconds to engage the  
Automatic Satellite Programme Recording mode. AVB and  
ASATjB appear on the front display panel.  
ATTENTION:  
When you record programmes by connecting to a digital  
terrestrial receiver (Freeview receiver or similar), perform the  
same steps as AAutomatic Satellite Programme Recording  
(HDD Deck Only)B on this page. It is not possible to operate the  
digital terrestrial receiver (Freeview receiver or similar) by using  
the provided satellite controller.  
NOTES:  
To disengage the Automatic Satellite Programme Recording  
mode, press SATj.  
If the unit’s power is off, it is not possible to engage the Automatic  
Satellite Programme Recording mode.  
Be sure not to turn on the satellite receiver before the  
programme is executed; otherwise, the unit will start recording  
when the satellite receiver’s power is turned on.  
If you have connected another appliance other than a satellite  
receiver to the [L-2 IN/DECODER] connector, be sure not to  
engage the Automatic Satellite Programme Recording mode;  
otherwise, the unit will start recording when the connected  
appliance’s power is turned on.  
In step 4, if AVB blinks quickly on the front display panel even  
though your satellite receiver’s power is off, Automatic Satellite  
Programme Recording will not work properly with that satellite  
receiver*. If this is the case, perform AManual Timer  
ProgrammingB (A pg. 48) to timer record a satellite programme.  
* Some satellite receivers output signals even if the power is off. Automatic  
Satellite Programme Recording is not possible with those satellite  
receivers.  
AVB blinks on the front display panel while Automatic Satellite  
Programme Recording is in progress.  
For timer programming of the satellite receiver, refer to the  
instruction manual of the satellite receiver.  
Automatic Satellite Programme Recording and timer recording  
cannot be done at the same time.  
DV/HDD/DVD  
SELECT  
Automatic Satellite Programme Recording is not possible if your  
satellite receiver does not have a timer.  
If there are more than one satellite programmes you wish to  
record with Automatic Satellite Programme Recording, it is not  
possible to set different recording modes for each programme.  
Depending on the type of satellite receiver, the unit may not  
record a slight portion of the beginning of the programme or may  
record slightly longer than the actual length of the programme.  
If you engage the Automatic Satellite Programme Recording  
mode when the satellite receiver’s power is on, the unit will not  
start Automatic Satellite Programme Recording even though AVB  
blinks on the front display panel. When the satellite receiver shuts  
off once and is turned back on again, the unit starts recording.  
You can also record a programme from your cable system in the  
same way if the system has a timer.  
REC MODE  
CABLE/SAT  
TV  
DVD  
HDD  
Just Clock (A pg. 77) does not work when the Automatic Satellite  
Programme Recording mode is engaged.  
REC MODE  
SATj  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
NAVIGATION ON HDD/DVD DECK  
EN  
51  
Using Library Database Navigation system, you can easily modify  
registered information, edit the title or play list, as well as search for  
the beginning of each title.  
Library Database Navigation  
About registration of information  
The following information is automatically registered for each title  
when ordinary recording or timer recording is performed, then  
stored in an area specified on the unit.  
index* (reduced pictures to show programme titles)  
programme title*  
category*  
date and time  
channel  
recording mode  
The Library Database Navigation enables you to search and select  
the desired titles recorded on the HDD deck and the DVD deck  
very easily.  
You can record up to 99 titles on a disc.  
Each time a title is recorded, the information of the title is  
registered for the Library Database Navigation automatically.  
So, you can confirm the information of the titles recorded with the  
Library Database Navigation screen. And, you can also select one  
of the titles recorded using the Library Database Navigation.  
The following screen appears as the Library Database Navigation  
screen when you press NAVIGATION. You can move the arrow to  
select the desired position on the screen by pressing selection  
keys on the remote control.  
length of recording time  
The items marked with an asterisk (*) can be easily modified and  
registered again after recording by using Library Database  
Navigation system.  
The limitations of registration  
You can register information up to 99 titles for the DVD deck and  
200 titles for the HDD deck.  
When the amount of information is at the limits of registration, you  
cannot record new titles any more. In this case, you need to delete  
old titles to register new ones. (A pg. 53)  
NAVIGATION > ORIGINAL  
0026 [FISH WORLD  
25/12/03 THU 10:00 - 10:15  
FROG WORLD  
]
143 MIN  
A
B
PR.  
3
D
E
[HOBBY]  
EP  
SELECT WITH @  
THEN PRESS [ENTER]  
PRESS [NAVIGATION]  
TO EXIT  
NOTES:  
Once a DVD-R/RW (Video mode) disc has been finalised, the  
display for original does not appear. Only display for library  
appears.  
ENTER  
NAVIGATION  
EXIT  
SELECT  
C
F
G
When a copy-once title recorded on the HDD is dubbed to a DVD  
disc (DVD-RAM/-RW (VR mode)), the original data will be moved  
from the HDD to the DVD disc. In additional, the title that was  
moved to the DVD disc will become a copy-protected title, and  
A Playback screen  
(Indicates currently received TV programme.)  
B Guidance for operations  
C Scroll bar  
(Appears when there are over nine registered titles (or play  
lists). The scroll bar only indicates that there are more titles (or  
play lists) hidden off the current screen display. To show hidden  
titles (or play lists), press selection keys repeatedly.)  
D Recording information for the title indicated by the arrow  
E Index list  
the icon changes from  
to  
.
Sound of received channel may be interrupted while the Library  
Database Navigation screen is displayed.  
The order of index which are displayed by pressing DUBBING  
differs from the images displayed by pressing NAVIGATION or  
EDIT.  
You cannot perform timer recording during editing of thumbnail  
images or play lists by pressing EDIT. Press EDIT to clear the  
Editing screen before performing timer recording.  
(Thumbnail still of each title)  
Thumbnail still is not to be played back.  
F Index  
:Indicates no index is registered.  
:Indicates title in standby for timer recording.  
:Indicates no title is registered.  
G Icons  
(Indicate the record condition of each title.)  
The Icons and their meanings  
This title is write-protected.  
This title was recorded with timer recording.  
This title is Weekly Recording/Weekly Overwrite.  
This title is Daily Recording/Daily Overwrite.  
This title is Daily Recording/Weekly Overwrite.  
This title has not been played back.  
W
D
D
NEW  
This title is copy-protected.  
This title can only be recorded once (copy-once title).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
NAVIGATION ON HDD/DVD DECK  
EN  
52  
Scan For Beginning Of Title  
Edit Original Information  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Press HDD or DVD to choose the corresponding deck.  
Load a DVD disc to scan.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Press HDD or DVD to choose the corresponding deck.  
Load a DVD disc to modify.  
CABLE/SAT  
TV  
DVD  
HDD  
DVD  
ATTENTION:  
It is not possible to modify discs recorded on DVD units from  
other manufacturers.  
You cannot perform timer recording during editing the index by  
pressing EDIT. Press EDIT to clear the editing screen before  
performing timer recording.  
MEMO  
CANCEL  
ENTER  
EDIT  
NAVIGATION  
Modify Index  
Selection Keys  
FGDE  
1 Press EDIT. The Editing screen appears.  
I
N
2 (DVD deck only) Press selection keys to select AMODIFYB  
O
o
under AORIGINAL/PLAY LISTB, then press ENTER.  
W
3 Press selection keys to select AMODIFYB under AORIGINALB,  
then press ENTER.  
4 Press selection keys to select a title you want to modify, then  
press ENTER.  
5 Press selection keys to select AINDEXB, then press ENTER.  
6 Press I to start playback. Press O or N to search for the  
picture from the title, then press W.  
The pictures of the title appear  
on the left window.  
EDITING > MODIFY INDEX  
You can scan the beginning of the title easily with the Library  
Database Navigation.  
25/12/03 THU 10:00 - 10:15  
FROG WORLD  
PR.  
[OTHERS]  
3
SP  
INDEX  
7 Confirm the arrow is on  
AREPLACEB, then press  
ENTER to register new index.  
New index appears on the  
right window.  
1 Press NAVIGATION. The Library Database Navigation screen  
appears.  
PROG.  
1
0 : 01 : 03  
2 Press selection keys to select AORIGINALB, then press  
SELECT IMAGE TO REPLACE WITH  
ON REMOTE  
RETURN  
ENTER.  
REPLACE  
When you press ENTER with  
the arrow on ARETURNB you  
can return to the previous screen.  
3 Press selection keys to select  
NAVIGATION > ORIGINAL  
the index (small pictures) of  
0026 [FISH WORLD  
25/12/03 THU 10:00 - 10:15  
]
143 MIN  
PR.  
3
[HOBBY]  
FROG WORLD  
EP  
the desired title, then press  
ENTER.  
When you want the plural titles  
to be played back  
continuously, press MEMO  
after selecting the desired title.  
The numbers of the playback  
order appear on the index. You can select up to 8 titles.  
When you want to correct the order, move the arrow to the  
SELECT WITH @  
THEN PRESS [ENTER]  
8 Press EDIT to return to the normal screen.  
PRESS [NAVIGATION]  
TO EXIT  
Modify Title Name  
NAVIGATION  
EXIT  
ENTER  
SELECT  
1 Perform steps 1 4 of AModify IndexB above before continuing.  
2 Press selection keys to select ANAMEB, then press ENTER.  
3 Press selection keys to select AALPHABETB, ASYMBOL1B or  
ASYMBOL2B.  
desired index and press MEMO. The number disappears and  
the unit re-numbers the other programmes automatically.  
When you want to cancel the order, press CANCEL(L).  
4 Press selection keys to select  
A
BC EDITING > MODIFY NAME  
0026 [FISH WORLD  
25/12/03 THU 10:00 - 10:15  
FROG WORLD  
]
64 MIN  
the desired letter or symbol,  
then press ENTER. Repeat  
this process to complete the  
name.  
PR.  
3
[HOBBY]XP  
4 Press selection keys to select  
F ROG  
W
OR L D  
NAVIGATION > ORIGINAL  
SELECT WITH @  
THEN PRESS [ENTER]  
ABEGINNINGB, then press  
25/12/03 THU  
10:00 10:15  
FROG WORLD  
ALPHABET SYMBOL1  
SYMBOL2  
SP  
-
PR.  
3
A
G
M
S
B
H
N
T
C
I
D
J
E
K
F
L
R
X
a
g
b
h
n
t
c
i
d
j
e
k
f
l
1
4
7
0
?
&
2
5
8
+
!
3
6
9
-
PRESS [EDIT]  
TO EXIT  
ENTER.  
[HOBBY]  
O
U
P
V
Q
W
m
s
o
u
p
v
q
w
r
x
SELECT WITH @  
THEN PRESS [ENTER]  
To correct a letter, press  
selection keys to select  
ADELETEB, then press  
ENTER.  
To resume playback from the  
point where playback was  
previously stopped, press  
selection keys to select  
ARESUMEB, then press  
ENTER.  
Y
Z
y
z
"
SELECT HOW TO PLAY BACK  
BEGINNING RESUME REPEAT  
'
@
PRESS [NAVIGATION]  
TO EXIT  
EDIT  
EXIT  
ENTER  
CANCEL  
DELETE  
SAVE  
SELECT  
NAVIGATION  
ENTER  
EXIT  
SELECT  
You can enter the letters up to 64.  
5 Press selection keys to select ASAVEB, then press ENTER.  
6 Press EDIT to return to the normal screen.  
To repeat playback of a selected title, press selection keys to  
select AREPEATB, then press ENTER.  
5 Press W to pause playback.  
To resume normal playback, press I.  
6 Press o to stop playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                         
Modify Category  
Delete Unwanted Part Of The Title  
(DVD-RAM & DVD-RW (VR mode) only)  
1 Perform steps 1 4 of AModify IndexB (A pg. 52) before  
continuing.  
You can delete unwanted part of the title.  
2 Press selection keys to select ACATEGORYB, then press  
1 Perform steps 1 2 of AModify IndexB (A pg. 52) before  
ENTER.  
continuing.  
3 Press selection keys to select  
2 Press selection keys to select ADEL SCENB, then press  
EDITING > MODIFY CATEGORY  
0026 [FISH WORLD  
]
64 MIN  
the desired category, then  
ENTER.  
PR.  
3
25/12/03 THU 10:00 - 10:15  
FROG WORLD  
[HOBBY] XP  
press ENTER.  
3 Press selection keys to select a title whose unwanted part you  
want to delete, then press ENTER.  
MOVIES  
MUSIC  
DRAMA  
SELECT WITH @  
THEN PRESS [ENTER]  
4 Press EDIT to return to the  
ANIMATION  
NEWS  
SPORTS  
DOCUMENTARY  
EDUCATION  
PRESS [EDIT]  
TO EXIT  
normal screen.  
WEATHER  
4 Press I to start playback. Press O or N to find the point  
where you want the deletion to begin, then press W.  
EDIT  
ENTER  
HOBBY  
ENTERTAINMENT ART  
5 Confirm the arrow is on AINB,  
EDITING > ORIGINAL/DEL SCENE  
21/12/03 SUN 18:30 - 20:00  
RALLY CAR  
PR. 12  
[OTHERS]  
then press ENTER.  
SP  
IN  
Protect Title (DVD-RAM & DVD-RW (VR mode) only)  
You can protect titles to prevent accidental erasure of the important  
titles.  
6 Press I to start playback.  
Press O or N to find the  
point where you want the  
0 : 05 :15  
OUT  
0 : 06 :15  
PROG.  
1
0 : 01 : 03  
deletion to end, then press W.  
SELECT SCENE TO DELETE WITH  
ON REMOTE  
1 Perform steps 1 2 of AModify IndexB (A pg. 52) before  
IN OUT  
PREVIEW  
OK  
7 Press selection keys to select  
continuing.  
AOUTB, then press ENTER.  
2 Press selection keys to select APROTECTB, then press  
SelectAPREVIEWB,thenpress  
ENTER to preview the edited title.  
ENTER.  
3 Press selection keys to select a title you want to protect, then  
press ENTER.  
8 Press selection keys to select AOKB, then press ENTER.  
If you do not want to delete the scene, press RETURN.  
4 Press D E to select APROTECTB, then press ENTER. A  
B
To modify the points  
appears.  
A Press RETURN.  
To cancel the protection, repeat 3 4 again. In step 4, select  
ACANCEL PROTECTB, then press ENTER.  
B Repeat steps 4 8 as necessary.  
9 Press selection keys to select ADELETEB, then press ENTER.  
5 Press EDIT to return to the normal screen.  
The selected scene is deleted.  
To cancel the deletion, press selection keys to select  
ACANCELB, then press ENTER.  
NOTE:  
All the titles on a disc will be deleted once the disc is formatted  
even if they are protected titles.  
10Press EDIT to return to the normal screen.  
NOTES:  
Delete Title  
There may be a discrepancy of several seconds between the  
scene you intend to edit, and the scene which is actually edited.  
Available recording capacity may not match the deleted part after  
deletion.  
You cannot record any more with Library Database Navigation  
once the registered titles on the disc reach 99 titles for the DVD  
deck and 200 titles for the HDD deck. Deleting unnecessary titles  
after dubbing or other operations can increase remaining time and  
available recording capacity. (For DVD-R discs, although it is  
possible to delete recorded titles, available recording capacity does  
not increase.) The deleted title is never resumed. Play lists and title  
information in the unit’s library are also deleted.  
1 Press EDIT. The Editing screen appears.  
2 (DVD deck only) Press selection keys to select AMODIFYB  
under AORIGINAL/PLAY LISTB, then press ENTER.  
3 Press selection keys to select ADELETEB under AORIGINALB,  
then press ENTER.  
4 Press selection keys to select a title you want to delete, then  
press ENTER.  
5 Press selection keys to select ADELETEB, then press ENTER.  
When you cancel the deletion, select ACANCELB, then press  
ENTER.  
6 Press EDIT to return to the normal screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                       
NAVIGATION ON HDD/DVD DECK  
EN  
54  
Divide Title (HDD deck only)  
Edit Play List Information  
1 Press EDIT. The Editing screen appears.  
2 Press selection keys to select ADIVIDEB, then press ENTER.  
3 Press selection keys to select a title to divide, then press  
ENTER.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Press HDD or DVD to choose the corresponding deck.  
Load a DVD disc to modify.  
4 Press I to start playback. Press O or N to locate a point to  
divide, then press W.  
5 Confirm the arrow is on ADIVIDEB, then press ENTER.  
The first picture (start) of the newly created title appears in the  
bottom right window.  
Select APREVIEWB, then press ENTER. The first several  
seconds of the newly created title is played back, then the  
playback pauses at the dividing point.  
To undo the division, press selection keys to select ARETRYB,  
then press ENTER. Repeat the above procedure to locate  
another point to divide.  
ATTENTION:  
It is not possible to modify discs recorded on DVD units from  
other manufacturers.  
You cannot perform timer recording during editing the index by  
pressing EDIT. Press EDIT to clear the editing screen before  
performing timer recording.  
6 Press selection keys to select AOKB, then press ENTER.  
7 Press selection keys to select ADIVIDEB, then press ENTER.  
Select ACANCELB, then press ENTER to return to the previous  
screen.  
CABLE/SAT  
TV  
DVD  
HDD  
8 Press EDIT to return to the normal screen.  
DVD  
NOTE:  
There may be a discrepancy of several seconds between the  
CANCEL  
ENTER  
MEMO  
Modify Chapter  
(HDD, DVD-RAM & DVD-RW (VR mode) only)  
You can create and delete chapter marks in titles.  
EDIT  
NAVIGATION  
Selection Keys  
DFGE  
1 Perform steps 1 4 of AModify IndexB (A pg. 52) before  
T
I
N
S
O
continuing.  
2 Press selection keys to select ACHAPTERB, then press  
W
ENTER.  
o
3 Press I to start playback.  
EDITING > MODIFY CHAPTER  
Press O or N, then press  
CHAPTER 03/10  
W at the positions you want to  
0 : 07 : 01  
mark.  
4 Press selection keys to select  
AMARKB, then press ENTER.  
01 00 : 00 : 00  
02 00 : 05 : 30  
03 00 : 07 : 00  
04 00 : 30 : 00  
To undo the marking, press  
selection keys to select  
ARETRYB, then press ENTER.  
MARK  
ERASE  
RETRY  
RETURN  
Play List  
Repeat the above steps 3 and 4 to locate another point to mark.  
It is a collection of the scenes. A play list can be freely edited and  
played back without ever changing any original recording data.  
Using the random access of a disc (which allows video data to be  
instantly read no matter where it is on the disc), a play list includes  
information such as the timer counter for the playback start point  
and end point, indexes for checking the contents of recorded data,  
category information, and more. Playback according to a play list  
you have created allows you to enjoy various combinations of  
video images from a single title.  
5 Press S or T to select one chapter you want to delete,  
press selection keys to select AERASEB, then press ENTER.  
To undo the deletion, press selection keys to select ARETRYB,  
then press ENTER.  
6 Press EDIT to return to the normal screen.  
NOTE:  
There may be a discrepancy of several seconds between the  
scene you intend to edit, and the scene which is actually edited.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
NAVIGATION ON HDD/DVD DECK  
EN  
55  
Create Play List  
Add scenes  
1 Press EDIT. The Editing screen appears.  
1 Perform steps 1 5 of AEdit ScenesB on the left column before  
continuing.  
2 (DVD deck only) Press selection keys to select AMODIFYB  
under AORIGINAL/PLAY LISTB, then press ENTER.  
2 Press selection keys to select ASEL. TITLEB, then press  
ENTER.  
3 Press selection keys to select ACREATEB, then press ENTER.  
3 Perform steps 4 11 of ACreate Play ListB on the left column.  
4 Press selection keys to select a title that includes scenes to be  
included in a play list, then press ENTER.  
Move Scenes  
5 Press I to start playback. Press O or N to find the point  
where you want the created play list to begin, then press W.  
1 Perform steps 1 5 of AEdit ScenesB on the left column before  
continuing.  
6 Confirm the arrow is on AIN/  
EDITING > PLAY LIST/CREATE  
TOTAL TIME  
00 : 00 : 00  
PAGE  
OUTB, then press ENTER.  
The edit-in time is displayed on  
the screen.  
SCENE  
PRO.  
1 / 1  
2 Press selection keys to select AMOVEB, then press ENTER.  
1
2
3
4
5
6
7
8
1
3 Press selection keys to select a scene to move, then press  
ENTER.  
To undo, press selection keys  
to select ARETRYB, then press  
ENTER.  
PRO.  
1
0 : 00 :15  
4 Press selection keys to select another scene to which the  
scene is to be moved, then press ENTER.  
To cancel the move, press selection keys to select ARETRYB,  
then press ENTER.  
IN  
OUT  
MODIFY  
DELETE  
MOVE  
RETRY  
PREVIEW  
OK  
IN/OUT  
SEL. TITLE  
7 Press I to start playback.  
Press O or N to find the  
5 Perform steps 9 11 of ACreate Play ListB on the left column.  
point where you want the created play list to end, then press W.  
8 Confirm the arrow is on AIN/OUTB, then press ENTER.  
Delete Scenes  
The edit-out time is displayed on the screen.  
The edit-out point must come after the edit-in point.  
Select APREVIEWB, then press ENTER to preview the play list.  
1 Perform steps 1 5 of AEdit ScenesB on the left column before  
continuing.  
9 Press selection keys to select AOKB, then press ENTER.  
10Press selection keys to select AEXITB, then press ENTER  
11Press EDIT to return to the normal screen.  
2 Press selection keys to select ADELETEB, then press ENTER.  
3 Press selection keys to select a scene to delete, then press  
ENTER.  
NOTES:  
4 Perform steps 9 11 of ACreate Play ListB on the left column.  
There may be a discrepancy of several seconds between the  
scene you intend to edit, and the scene which is actually edited.  
The title, index and category of the play list can be modified in the  
same way as AORIGINALB. (A pg. 52)  
Play Back Play List  
1 Press NAVIGATION. The Library Database Navigation screen  
You can modify the play list that has just been created here by  
adding, moving, or deleting unwanted parts to create a digest  
edition, etc.  
appears.  
2 Press selection keys to select APLAY LISTB, then press  
ENTER.  
3 Press selection keys to select  
Edit Scenes  
NAVIGATION > PLAY LIST  
the index (small pictures) of  
0026 [FISH WORLD  
026 CREATED 26/12/03 FRI  
TEDDY BEAR 25/12  
]
143 MIN  
[MOVIES]  
the desired play list, then  
press ENTER.  
When you want the plural play  
lists to be played back  
continuously, press MEMO  
after selecting the desired play  
lists. The numbers of the  
playback order appear on the index. You can select up to 8 play  
lists.  
When you want to correct the order, move the arrow to the  
desired index and press MEMO. The number disappears and  
the unit re-numbers the other play lists automatically.  
When you want to cancel the order, press CANCEL(L).  
1 Press EDIT. The Editing screen appears.  
001  
004  
007  
002  
005  
008  
003  
SELECT WITH @  
THEN PRESS [ENTER]  
2 (DVD deck only) Press selection keys to select AMODIFYB  
PRESS [NAVIGATION]  
TO EXIT  
006  
009  
under AORIGINAL/PLAY LISTB, then press ENTER.  
3 Press selection keys to select AMODIFYB under APLAY LISTB,  
then press ENTER.  
NAVIGATION  
EXIT  
ENTER  
SELECT  
4 Press selection keys to select a play list to modify, then press  
ENTER.  
5 Press selection keys to select ASCENEB, then press ENTER.  
6 Press selection keys to select AMODIFYB, then press ENTER.  
7 Press selection keys to select the start or end point of a scene  
to modify, then press ENTER.  
4 Press selection keys to select ABEGINNINGB, then press  
8 Perform steps 5 11 of ACreate Play ListB above.  
ENTER. The playback starts.  
Upon completing play list playback, the normal screen will  
resume.  
The normal screen will also resume when o is pressed to stop  
play list playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
NAVIGATION ON HDD/DVD DECK  
EN  
56  
Delete Play List  
Navigate Library Information  
1 Press EDIT. The Editing screen appears.  
2 (DVD deck only) Press selection keys to select AMODIFYB  
under AORIGINAL/PLAY LISTB, then press ENTER.  
3 Press selection keys to select ADELETEB under APLAY LISTB,  
then press ENTER.  
Title information can be registered in the unit’s memory for up to  
600 DVD discs, 2,000 titles. It is helpful when finding a desired title  
(or play list) by sorting according to the sort options registered  
during (or after) recording.  
4 Press selection keys to select one play list you want to delete,  
then press ENTER.  
5 Press selection keys to select ADELETEB, then press ENTER.  
When you cancel the deletion, select ACANCELB, then press  
ENTER.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Press HDD or DVD to choose the corresponding deck.  
6 Press EDIT to return to the normal screen.  
CABLE/SAT  
NOTE:  
TV  
DVD  
Even if a play list is deleted, the titles recorded and the library  
information are not affected at all.  
HDD  
DVD  
Modify Index  
A Perform steps 1 4 of AEdit ScenesB (A pg. 55) before  
continuing.  
B Perform steps 5 8 of AModify IndexB (A pg. 52).  
NAVIGATION  
Selection Keys  
FGDE  
Modify Play List Name  
A Perform steps 1 4 of AEdit ScenesB (A pg. 55) before  
continuing.  
ENTER  
B Perform steps 2 6 of AModify Title NameB (A pg. 52).  
Scan For Title From Library  
Modify Category  
A Perform steps 1 4 of AEdit ScenesB (A pg. 55) before  
continuing.  
1 Press NAVIGATION. The Library Database Navigation screen  
appears.  
2 Press selection keys to select  
B Perform steps 2 4 of AModify CategoryB (A pg. 53).  
NAVIGATION  
the appropriate sort button to  
DVD NAVIGATION  
sort the information, then  
press ENTER.  
ADATEB:  
Sort by date  
ADISC No.B:  
Sort by disc number  
ACATEGORYB:  
Sort by category  
ANAMEB:  
ORIGINAL  
PLAY LIST  
SELECT WITH @  
THEN PRESS [ENTER]  
PRESS [NAVIGATION]  
TO EXIT  
DVD LIBRARY  
DATE  
CATEGORY  
DISC No.  
NAME  
ENTER  
NAVIGATION  
EXIT  
A
SELECT  
Sort by name  
ADATEB and ADISC No.B are available for the DVD deck only.  
3 Press selection keys to select the desired title, then press  
ENTER.  
For HDD deck, playback begins automatically after the selected  
title is located.  
For DVD deck, the title information will be displayed after the  
selected title is located. However, playback will not begin  
automatically.  
NOTE:  
If a disc registered in the library is recorded or modified on DVD  
units from other manufacturers, it may become impossible to  
operate properly.  
Register Disc  
When a disc that is not registered in the library is loaded, a  
message appears confirming if the disc should be registered. If  
registering, perform the following procedure.  
1 Press selection keys to select AREGISTERB, then press  
ENTER to confirm the registration.  
2 Press NAVIGATION to return to the normal screen.  
NOTES:  
It is not possible to register discs formatted on devices other than  
JVC’s DVD recorders.  
It is not possible to register discs recorded on devices other than  
JVC’s DVD recorders.  
It is not possible to register discs when ASAVE AS LIBRARYB is  
set to AOFFB. (A pg. 72)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
NAVIGATION ON HDD/DVD DECK  
EN  
57  
Locating The Desired Group And Tracks  
Playback With MP3/WMA/JPEG  
Navigation  
1 Load a disc.  
2 Press NAVIGATION.  
3 Press selection keys to select AORIGINALB, then press  
ENTER.  
4 Press selection keys to select  
NAVIGATION > ORIGINAL  
This unit can play back discs that MP3/WMA sound files and JPEG  
image files taken with digital still cameras or other devices are  
recorded.  
The MP3/WMA/JPEG Navigation enables you to search and select  
the desired files recorded on CD-R/RW or CD-ROM discs very  
easily.  
the desired group, then press  
GROUP  
IT’S SHOWTIME ! ! /B’z  
:
001/100  
TRACK  
:
001/100  
0 : 07 : 01  
ENTER.  
A list of files in the selected  
group appears.  
ROOT  
001. IT’S SHOWTIME ! ! /B’z  
CLASSIC  
002. ONLY FLOWER IN THE WORLD/SMAP  
003. SEXY GUY/GOMAKI  
CLUB  
DANCE  
004. HEY?/AYAYA  
EUROPE  
005. DOOR TO TOMORROW/I WISH  
006. REASON/ASAMI  
FOREIGN GROUP  
FOREIGN ROCK  
007. DIE ANOTHER DAY/JAMES BOND  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Press DVD to select the DVD deck.  
5 Press selection keys to select  
the desired item, then press  
ENTER. The unit starts  
playback from the selected  
item.  
NAVIGATION > ORIGINAL  
GROUP  
:
001/100  
TRACK  
:
001/100  
0 : 07 : 01  
IT’S SHOWTIME ! ! /B’z  
ROOT  
001. IT’S SHOWTIME ! ! /B’z  
CLASSIC  
002. ONLY FLOWER IN THE WORLD/SMAP  
003. SEXY GUY/GOMAKI  
CLUB  
DANCE  
004. HEY?/AYAYA  
The unit stops when all items  
played back.  
EUROPE  
005. DOOR TO TOMORROW/I WISH  
006. REASON/ASAMI  
FOREIGN GROUP  
FOREIGN ROCK  
NAVIGATION > ORIGINAL  
007. DIE ANOTHER DAY/JAMES BOND  
GROUP  
:
001/100  
TRACK  
:
001/100  
0 : 07 : 01  
IT’S SHOWTIME ! ! /B’z  
NOTES:  
ROOT  
001. IT’S SHOWTIME ! ! /B’z  
If you press SELECT(I) instead of ENTER in step 4, the unit  
CLASSIC  
002. ONLY FLOWER IN THE WORLD/SMAP  
003. SEXY GUY/GOMAKI  
CLUB  
starts playback from the first file of the group.  
JPEG files are played back as a slide show at the set intervals.  
(A pg. 32)  
DANCE  
004. HEY?/AYAYA  
EUROPE  
005. DOOR TO TOMORROW/I WISH  
006. REASON/ASAMI  
FOREIGN GROUP  
FOREIGN ROCK  
007. DIE ANOTHER DAY/JAMES BOND  
If a file name includes any 2-byte character, the unit may not  
show the file name correctly.  
The order of the groups and items shown in steps 4 and 5 may  
differ from the order shown on your PC.  
A Selected group number/total number of groups on the disc  
B Selected file number/total number of files in the group that  
contains the selected file  
C Elapsed time (MP3/WMA)  
D Name of the selected file  
E Group name  
F Selected file  
NOTES:  
If there are more than 100 files, the rest of the files are not  
displayed. In this case, press ON SCREEN to display them on  
the TV screen.  
If both MP3 files and WMA files are recorded on the same disc,  
WMA files cannot be played back as they are not displayed on  
the navigation screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
EDITING  
EN  
58  
5 Press selection keys to select indexes (small pictures) of  
desired original recordings and/or play lists, then press MARK.  
After selecting all indexes you want to dub, press ENTER.  
You can select up to 8 original recordings and/or play lists.  
Dubbing  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
The recordable time of the disc is displayed on the bar meter.  
For details, refer to About Disc Remaining Display pg. 60).  
A
B
(A  
6 Press selection keys to select AEXECUTEB, then press  
ENTER to start dubbing.  
CABLE/SAT  
NOTES:  
TV  
DVD  
Play lists are dubbed as programmes.  
HDD  
DV  
In Video mode, if the selected play list includes the scenes  
recorded in the different transfer rate, the dubbing is performed in  
the highest transfer rate of the scenes in the selected play list.  
During dubbing, it is not possible to play back on HDD or DVD, or  
to set timer programming.  
DVD  
MARK  
It is not possible to discontinue dubbing once it has been started.  
DUBBING  
ENTER  
Just Dubbing (From HDD To DVD)  
By using Just Dubbing function, when dubbing all selected original  
recordings and/or play lists, the unit automatically sets the  
appropriate recording mode depending on the combination of the  
total time of the selected recordings and/or play lists to be dubbed  
and the available disc space.  
Selection Keys  
FGDE  
I
R
o
W
1 Load a recordable disc.  
2 Press DUBBING to access the Dubbing Menu screen.  
3 Press selection keys to select AHDDNDVDB, then press  
ENTER.  
4 Press selection keys to select AJUSTB, then press ENTER.  
5 Perform steps 5 6 of AHigh Speed Dubbing (From HDD To  
DVD)B.  
NOTES:  
Play lists are dubbed as programmes.  
NOTES:  
recorded in the different transfer rate, the dubbing is performed in  
the highest transfer rate of the scenes in the selected play list.  
However, the lower transfer rate cannot be dubbed in the higher  
transfer rate.  
The recordable time of the disc is displayed on the bar meter. For  
details, refer to AAbout Disc Remaining DisplayB (A pg. 60).  
During dubbing, it is not possible to play back on HDD or DVD, or  
to set timer programming.  
It is not possible to dub copy-protected contents. An error  
message will appear on the TV screen.  
It is not possible to dub simultaneously when timer  
programming is set. Select either dubbing or timer  
programming.  
The order of the index which is displayed by pressing  
DUBBING differs from the images displayed by pressing  
NAVIGATION or EDIT.  
It is not possible to discontinue dubbing once it has been started.  
High Speed Dubbing (From HDD To DVD)  
It is possible to dub the original recordings and/or play lists on the  
HDD deck to DVD discs. The dubbing is performed in high speed,  
keeping the original transfer rate.  
Manual Dubbing (From HDD To DVD)  
It is possible to perform dubbing in the desired transfer rate.  
1 Load a recordable disc.  
NOTES:  
2 Press DUBBING to access the Dubbing Menu screen.  
After accessing the Dubbing Menu screen, it is not possible to  
take out a disc.  
3 Press selection keys to select AHDDNDVDB, then press  
ENTER.  
It is not possible to dub copy-once titles in Video mode.  
When dubbing a copy-once title, the data will be moved from  
HDD to DVD upon completing dubbing.  
When you cancel dubbing a copy-once title during dubbing, the  
original recording on the HDD deck remains and the title copied  
to a DVD disc is deleted.  
It is not possible to dub play lists which contain copy-once titles.  
It is not possible to dub the following programmes to DVD-R/RW  
disc (Video mode):  
which contains more than one audio language.  
which is on the play list.  
4 Press selection keys to select AMANUALB, then press ENTER.  
5 Perform step 5 of AHigh Speed Dubbing (From HDD To DVD)B.  
The Manual Dubbing screen appears.  
6 Press selection keys to select AREC MODEB, then press  
ENTER. Press selection keys to select the desired option,  
then press ENTER.  
7 Press G to select ACONFIRMB, then press ENTER.  
8 Press selection keys to select AEXECUTEB, then press  
ENTER to start dubbing.  
which is edited (also RetroActive Recording).  
which is recorded in LP mode or FP155-FP240 mode.  
Recording may not be performed in the highest speed depending  
on the characteristics of the disc used.  
NOTES:  
recorded in the different transfer rate, the dubbing is performed in  
the highest transfer rate of the scenes in the selected play list.  
However, the lower transfer rate cannot be dubbed in the higher  
transfer rate.  
1 Load a recordable disc.  
2 Press DUBBING to access the Dubbing Menu screen.  
3 Press selection keys to select AHDDNDVDB, then press  
The recordable time of the disc is displayed on the bar meter. For  
details, refer to AAbout Disc Remaining DisplayB (A pg. 60).  
During dubbing, it is not possible to play back on HDD or DVD, or  
to set timer programming.  
ENTER.  
4 Press selection keys to select AHIGH SPEEDB, then press  
ENTER.  
It is not possible to discontinue dubbing once it has been started.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
EDITING  
EN  
59  
Dubbing From HDD To DV  
It is possible to perform dubbing from the HDD deck to the DV  
deck.  
Dubbing From DVD To DV  
It is possible to perform dubbing from the DVD deck to the DV  
deck.  
1 Load a Mini DV cassette with the erase protection switch set to  
1 Load the disc you want to dub onto the DVD deck, and a Mini  
DV cassette with the erase protection switch set to ARECB to the  
DV deck.  
ARECB.  
2 Press DUBBING to access the Dubbing Menu screen.  
2 Press DUBBING to access the Dubbing Menu screen.  
3 Press selection keys to select AHDDNDVB, then press  
ENTER.  
3 Press selection keys to select ADVDNDVB, then press ENTER.  
4 Press selection keys to select indexes (small pictures) of  
desired original recordings and/or play lists, then press MARK.  
After selecting all indexes you want to dub, press ENTER.  
You can select up to 8 original recordings and/or play lists.  
4 Press selection keys to select indexes (small pictures) of  
desired original recordings and/or play lists, then press MARK.  
After selecting all indexes you want to dub, press ENTER.  
You can select up to 8 original recordings and/or play lists.  
5 Press selection keys to select ASELECT REC. MODEB, then  
press ENTER. Press selection keys to select the desired  
option, then press ENTER.  
5 Press selection keys to select ASELECT REC. MODEB, then  
press ENTER. Press selection keys to select the desired  
option, then press ENTER. The confirmation screen appears.  
6 Press selection keys to select ASELECT SND. MODEB, then  
press ENTER. Press selection keys to select the desired  
option, then press ENTER.  
6 Press selection keys to select ASELECT SND. MODEB, then  
press ENTER. Press selection keys to select the desired  
option, then press ENTER.  
Sound mode selection is not available when dubbing a  
DVD-RW (Video mode) or DVD-R disc.  
7 Press G to select ACONFIRMB, then press ENTER. The  
confirmation screen appears.  
7 Press G to select ACONFIRMB, then press ENTER. The  
8 Press DV so that the DV lamp lights up on the unit.  
confirmation screen appears.  
9 Press I to locate the point from where you want to start  
dubbing, press o or W then press R and W simultaneously so  
that the DV deck enters the record pause mode.  
8 Press DV so that the DV lamp lights up on the unit.  
9 Press I to locate the point from where you want to start  
dubbing, press o or W then press R and W simultaneously so  
that the DV deck enters the record pause mode.  
10Press HDD so that the HDD lamp lights up on the unit.  
The dubbing screen will appear.  
10Press DVD so that the DVD lamp lights up on the unit.  
11Press selection keys to select AEXECUTEB, then press  
ENTER for confirmation.  
The dubbing screen will appear.  
To cancel the dubbing, press o then selection keys to select  
ACANCELB and press ENTER to confirm.  
11Press selection keys to select AEXECUTEB, then press  
ENTER to confirm.  
To cancel the dubbing, press o then selection keys to select  
ACANCELB and press ENTER to confirm.  
12Upon completing dubbing, the tape stops and ADUBBING  
COMPLETEDB appears on the TV screen. Press ENTER to  
end.  
12Upon completing dubbing, the tape stops and ADUBBING  
COMPLETEDB appears on the TV screen. Press ENTER to  
end.  
Original Dubbing (From DVD To HDD)  
It is possible to dub the original recordings on DVD discs to the  
HDD deck.  
NOTES:  
It is not possible to dub play lists on DVD discs.  
It is not possible to dub Video CDs/SVCDs or Audio CDs.  
When dubbing is in progress, only o is functional.  
1 Load a disc you want to dub.  
2 Press DUBBING to access the Dubbing Menu screen.  
3 Press selection keys to select ADVDNHDDB, then press  
ENTER.  
4 Press selection keys to select indexes (small pictures) of  
desired original recordings and/or play lists, then press MARK.  
After selecting all indexes you want to dub, press ENTER.  
You can select up to 8 original recordings and/or play lists.  
5 Press selection keys to select AEXECUTEB, then press  
ENTER to start dubbing.  
NOTES:  
It is not possible to dub play lists on DVD discs.  
It is not possible to dub pre-recorded DVD VIDEO discs.  
It is not possible to dub Video CDs/SVCDs or Audio CDs.  
It is not possible to discontinue dubbing once it has been started.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING  
EN  
60  
8 Press selection keys to select AEXECUTEB, then press  
ENTER for confirmation.  
Once dubbing starts, it will continue dubbing until the end of the  
tape is reached.  
To cancel the dubbing, press o then selection keys to select  
ACANCELB and press ENTER to confirm.  
Dubbing From DV To HDD  
(Dubbing An Entire Cassette)  
It is possible to perform automatic dubbing of all the recorded  
programmes of a cassette from the DV deck to the HDD deck using  
the AENTIREB dubbing. You cannot select the images to be  
dubbed; all recorded images on the DV cassette will be dubbed.  
If the tape is not rewind, the unit will start dubbing after  
automatically rewinding the tape to the beginning.  
1 Load the Mini DV cassette you want to dub. Make sure its erase  
9 Upon completing dubbing, the tape stops and ADUBBING  
COMPLETEDB appears on the TV screen. Press ENTER to  
end.  
protection switch is set to ASAVEB.  
Set ADV AUDIO RECB to the appropriate mode. (A pg. 72)  
2 Press DUBBING to access the Dubbing Menu screen.  
The tape will automatically be rewound.  
3 Press selection keys to select ADVNHDDB, then press  
NOTES:  
ENTER.  
ASUPERIMPOSEB is automatically set to AOFFB. It will return to  
AAUTOB after dubbing is completed.  
4 Select AENTIREB, then press ENTER.  
The programme information at the DV deck will not be dubbed.  
When there are blanks on the tape of more than 2 seconds, the  
DVD deck will enter into pause mode while playback on DV deck  
continues. This also applies to portions of the DV tape that are  
damaged or unreadable. The last image is displayed on the TV  
screen. Dubbing will resume once recorded portion is detected. If  
the blank portion continues until the end of the tape, ADUBBING  
COMPLETEDB appears on the TV screen when the tape end is  
reached and the tape rewinds automatically.  
5 Press selection keys to select ASELECT REC. MODEB, then  
press ENTER. Press selection keys to select the desired  
option, then press ENTER.  
6 Press selection keys to select ASELECT SND. MODEB, then  
press ENTER. Press selection keys to select the desired  
option, then press ENTER.  
7 Press G to select ACONFIRMB, then press ENTER. The  
confirmation screen appears.  
Dubbing copyright guarded tape is not possible.  
When dubbing is in progress, only o is functional.  
8 Press selection keys to select AEXECUTEB, then press  
ENTER for confirmation.  
Once dubbing starts, it will continue dubbing until the end of the  
tape is reached.  
To cancel the dubbing, press o then selection keys to select  
ACANCELB and press ENTER to confirm.  
If the tape is not rewind, the unit will start dubbing after  
automatically rewinding the tape to the beginning.  
About Disc Remaining Display  
When dubbing from HDD to DVD, the unit displays the time  
information for dubbing by bar meter. By comparing the disc  
remaining time and the necessary time for dubbing of the selected  
items, it is possible to check if the dubbing can be performed  
completely or not.  
9 Upon completing dubbing, the tape stops and ADUBBING  
COMPLETEDB appears on the TV screen. Press ENTER to  
end.  
When performing the High Speed Dubbing  
Capacity of a disc  
Remaining capacity  
The tape will automatically be rewound.  
NOTES:  
ASUPERIMPOSEB is automatically set to AOFFB. It will return to  
AAUTOB after dubbing is completed.  
21%  
Dark green: Length of already recorded item  
Light green: Length of selected item  
Yellow: Length of the item now being selected by arrow  
Red: Excess over the capacity  
When there are blanks on the tape of more than 2 seconds, the  
HDD deck will enter into pause mode while playback on DV deck  
continues. This also applies to portions of the DV tape that are  
damaged or unreadable. The last image is displayed on the TV  
screen. Dubbing will resume once recorded portion is detected. If  
the blank portion continues until the end of the tape, ADUBBING  
COMPLETEDB appears on the TV screen when the tape end is  
reached and the tape rewinds automatically.  
When performing the Just Dubbing  
TOTAL 105MIN  
Dubbing copyright guarded tape is not possible.  
When dubbing is in progress, only o is functional.  
The unit displays the status on the assumption that the selected  
items are dubbed in the lowest transfer rate.  
The total time of a loaded disc is displayed on the right of the bar  
meter.  
Dubbing From DV To DVD  
(Dubbing An Entire Cassette)  
It is possible to perform automatic dubbing of all the recorded  
programmes of a cassette from the DV deck to the DVD deck using  
the AENTIREB dubbing. You cannot select the images to be  
dubbed; all recorded images on the DV cassette will be dubbed.  
When performing the Manual Dubbing  
MAX FR240  
1 Load the Mini DV cassette you want to dub. Make sure its erase  
protection switch is set to ASAVEB.  
The unit displays the status on the assumption that the selected  
items are dubbed in the lowest transfer rate.  
The available highest transfer rate is displayed on the right of the  
bar meter.  
Set ADV AUDIO RECB to the appropriate mode. (A pg. 72)  
2 Press DUBBING to access the Dubbing Menu screen.  
3 Press selection keys to select ADVNDVDB, then press ENTER.  
4 Select AENTIREB, then press ENTER.  
5 Press selection keys to select ASELECT REC. MODEB, then  
press ENTER. Press selection keys to select the desired  
option, then press ENTER.  
6 Press selection keys to select ASELECT SND. MODEB, then  
press ENTER. Press selection keys to select the desired  
option, then press ENTER.  
7 Press G to select ACONFIRMB, then press ENTER. The  
confirmation screen appears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EDITING  
EN  
61  
5 Press selection keys to select  
, then press ENTER  
to display the remote icon (facing to the right) for the DV  
equipment.  
DV Dubbing (HDD & DVD Deck Only)  
You can dub programmes from a camcorder or DV equipment  
connected to the unit with a DV cable. The unit’s remote control  
allows you the limited control of the connected camcorder or DV  
equipment functions during dubbing.  
6 Press REC MODE repeatedly to set the recording mode. For  
DV deck, press REC MODE on the remote control to set the  
recording mode.  
7 Locate the point from where you want to start dubbing, then  
stop or pause playback by pressing the following buttons on the  
remote control: I, N, O, o, W.  
To play back in slow speed (1/10 of the normal speed), press W  
to pause playback, then press O or N.  
To play back frame-by-frame, press W to pause playback, then  
press W repeatedly. Each press of W advances a frame.  
To change the playback direction, press O or N.  
NOTES:  
When connecting the unit to a device equipped with a DV input  
connector, be sure to use the optional DV cable (VC-VDV  
204U).  
When you connect a PC to the [DV IN] connector, we do not  
assure the normal operation of this unit.  
Your unit  
8 Press selection keys to select  
, then press ENTER  
repeatedly until the desired sound track appears on the TV  
screen.  
SOUND1:  
Select this to record the original stereo sound played back on  
the connected DV equipment.  
SOUND2:  
Select this to record the dubbed stereo sound played back on  
the connected DV equipment.  
Camcorder  
To [DV IN]  
MIX:  
Select this to record the sound of both ASOUND1B and  
ASOUND2B.  
Note that this selection is not available when the source  
DV cable  
(VC-VDV 204U)  
(not supplied)  
programme is recorded in 16BIT (48 kHz) mode.  
DV equipment  
9 Press selection keys to select  
ENTER. The dubbing starts.  
Playback on the external DV equipment and recording on the  
unit should start simultaneously.  
, then press  
DV connector  
To pause dubbing, press selection keys to select  
then press ENTER. Both the unit and the external DV  
equipment pause dubbing. Pressing W on the unit also works  
the same way.  
,
The following on-screen display for DV dubbing appears when  
ON SCREEN is pressed while the channel has been set to ADVB.  
0:00  
FR360 00:00:00. 00  
12bit  
DV JVC  
1:00  
2:00  
GR-DV3500  
00:00:00. 00  
DV  
HDD  
L
R
10Press selection keys to select  
, then press  
GR-DV3500  
SOUND1  
ENTER. Then press o. The DV equipment stops.  
11Press selection keys to select  
ENTER.  
, then press  
12Press o twice on the remote control to stop dubbing.  
1
2
DV  
DV  
Both the unit and the external DV equipment stop dubbing.  
NOTES:  
A
B
C
Dubbing copyright guarded programmes is not possible.  
A Remote control switch  
To switch between the devices operable by the remote control  
unit. The unit is operable when the remote icon (  
displayed faces to the left, while the DV device is operable when  
the remote icon is facing to the right.  
Original DV information such as the recording date and time are  
not recorded.  
The superimposed indication during the operation or dubbing is  
not recorded.  
If the dubbing is paused while the channel is set to ADVB, you  
cannot switch channels.  
)
Select to start or pause the dubbing. If ENTER is pressed when  
the DV device is in the pause condition, preroll editing* where it  
is possible to dub with a start time that is highly accurate will be  
activated. When the DV device cannot be operated from the unit  
(such as in camera mode), proceed with normal recording  
(A pg. 34, 37).  
Do not start dubbing at the portion with no time code (A– –:– –:– –B).  
* Preroll editing refers to the playback after the DV tape is slightly rewind.  
(For DV devices that do not support the –1x speed, the rewinding time  
may be longer.)  
When you dub from DV equipment other than a  
camcorder  
A Perform step 1 to 4.  
B Locate the point from where you want to start dubbing,  
then stop on the DV equipment.  
If you pause the DV equipment in this step, a few  
second’s still picture will be recorded at the beginning of  
the recorded programme.  
C
Set the input mode to ADV INPUTB on the DV equipment.  
C Sound monitor switch  
If you select an input mode other than ADV INPUTB,  
unwanted pictures may be recorded at the beginning of  
the recorded programme.  
For selecting the desired sound format for dubbing.  
1 Connect a camcorder or DV equipment to the [DV IN] connector  
D Perform step 9 to 12.  
on the unit’s front panel.  
2 Press DV/HDD/DVD SELECT on the unit repeatedly; or press  
To skip unwanted part of the source picture  
HDD or DVD on the remote control to select the recording deck.  
Press ENTER to stop both equipment, then press selection keys  
When dubbing to a DVD disc, load a recordable disc on this unit.  
to select  
.
Locate the point where you want to restart dubbing by pressing I,  
N, or O, then press o.  
3 Press PR +/– to set the channel to ADVB.  
4 Press ON SCREEN.  
Press selection keys to select  
restart dubbing.  
, then press ENTER to  
The on-screen display for DV dubbing appears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
EDITING  
EN  
62  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Edit From A Camcorder  
1 Make connections.  
You can use a camcorder as the source player and your unit as the  
recording deck. If your camcorder has a DV IN/OUT connector, you  
can use the camcorder as the recording deck and your unit (DV  
deck only) as the source player.  
A If the camcorder has no S-VIDEO output connector:  
^ connect the camcorder’s AUDIO/VIDEO OUT connectors to  
the unit’s [VIDEO/AUDIO ((MONO) L/R)] input connectors  
on the front panel.  
When using a monaural camcorder, connect its AUDIO OUT  
connector to the [AUDIO-L] input connector on your unit.  
B If the camcorder has an S-VIDEO output connector:  
^ connect the camcorder’s AUDIO OUT and S-VIDEO OUT  
connectors to the unit’s [AUDIO] and [S-VIDEO] input  
connectors on the front panel.  
A If the camcorder has no S-VIDEO output connector:  
C If the camcorder has a DV IN/OUT connector:  
^ connect the camcorder’s DV IN/OUT connector to the unit’s  
[DV IN/OUT] connector.  
Recorder  
To [VIDEO/AUDIO  
((MONO) L/R)] input  
When using your unit as the source player, refer to the  
camcorder’s instruction manual for the recording procedure.  
Audio/video cable  
(not supplied)  
2 Press DV/HDD/DVD SELECT on the unit repeatedly to select  
the recording deck.  
3 Press PR +/– to select AF-1B or ADVB.  
Set AF-1 INPUTB to AVIDEOB for the [VIDEO] input connector, or  
AS-VIDEOB for the [S-VIDEO] input connector, depending on the  
connector being used. (A pg. 65)  
AUDIO/VIDEO OUT  
4 Press REC MODE repeatedly to set the recording mode. For  
DV deck, press REC MODE on the remote control to set the  
recording mode.  
Player  
5 Start playback on the camcorder slightly before the actual point  
B If the camcorder has an S-VIDEO output connector:  
from where you wish to start dubbing.  
6 Press R on the unit to start recording. Or while holding R, press  
I on the remote control. The dubbing starts.  
7 Press o on the unit, then stop playback on the camcorder.  
NOTES:  
All necessary cables can be obtained from your dealer.  
Refer to the camcorder’s instruction manual for operating  
procedure.  
To [S-VIDEO]  
input  
Recorder  
To [AUDIO] input  
The quality of dubbed picture becomes poorer than that of the  
original.  
When you are editing through the [DV IN/OUT] connector, the  
unit will stop if the player begins playing a blank portion of tape or  
the signal is interrupted.  
When connecting the unit to a device equipped with a DV input  
connector, be sure to use the optional DV cable (VC-VDV 204U).  
To edit through the [DV IN/OUT] connector using the HDD or  
DVD deck, refer to ADV Dubbing (HDD & DVD Deck Only)B  
(A pg. 61).  
S-video cable  
(not supplied)  
Audio cable  
(not  
supplied)  
S-VIDEO OUT  
AUDIO OUT  
Player  
C If the camcorder has a DV IN/OUT connector:  
Recorder/Player  
To [DV IN]  
DV cable  
(VC-VDV 204U)  
(not supplied)  
DV connector  
Player/Recorder  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
EDITING  
EN  
63  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Edit To Or From Another Recorder  
1 Connect another recorder’s 21-pin SCART connector to the  
unit’s 21-pin SCART connector as illustrated.  
A When using your unit as the source player:  
You can use your unit as the source player or as the recording  
deck.  
^ connect its [L-1 IN/OUT] connector to the recording deck.  
B When using your unit as the recording deck:  
player.  
If another recorder is compatible with the Y/C signal:  
^ when using your unit as the source player, set AL-1  
OUTPUTB to ASCART S-VIDEOB. (A pg. 64)  
^ when using your unit as the recording deck, set AL-2  
SELECTB to AS-VIDEOB. (A pg. 64)  
NOTES:  
When using another recorder as the recording deck, refer to its  
instruction manual.  
It is not possible to dub copy-protected contents. An error  
message will appear on the TV screen.  
A When using your unit as the source player  
Player  
2 When using this unit as the recording deck, press DV/HDD/  
DVD SELECT on the unit repeatedly to select the recording  
deck.  
TV  
Your unit  
3 When using this unit as the recording deck, press PR +/– to  
select AL-2B.  
Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg. 64)  
4 When using this unit as the recording deck, press REC MODE  
repeatedly to set the recording mode. For DV deck, press  
REC MODE on the remote control to set the recording mode.  
21-pin SCART cable  
(supplied)  
21-pin SCART cable  
(not supplied)  
5 Engage the Play mode of the source player.  
6 Engage the Record mode of the recording deck.  
7 Stop recording on the recording deck, then stop playback on the  
source player.  
Another recorder  
NOTES:  
All necessary cables can be obtained from your dealer.  
For Y/C signal input/output, be sure to use a 21-pin SCART cable  
that is compatible with the Y/C signal.  
Recorder  
When you use this unit as the source player for editing, be sure to  
set ASUPERIMPOSEB to AOFFB before starting. (A pg. 73) If  
you are using another recorder with S-Video and Audio output  
connectors, connect its S-Video and Audio output connectors to  
this unit’s [S-VIDEO] and [AUDIO] input connectors on the front  
panel. Then, set the unit’s input mode to AF-1B in step 3, and set  
AF-1 INPUTB to AS-VIDEOB. (A pg. 65)  
B When using your unit as the recording deck  
Your unit  
TV  
Recorder  
21-pin SCART  
cable (supplied)  
21-pin SCART cable  
(not supplied)  
Another recorder  
Player  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
EDITING  
EN  
64  
SCART RGB:  
If a connected appliance’s input is compatible with RGB signals,  
set to ASCART RGBB. You can obtain a high-quality RGB  
picture.  
Output/Input Set  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
COMPONENT:  
If a connected appliance’s input is compatible with Y/PB/PR  
signals, set to ACOMPONENTB. You can obtain a high-quality  
Y/PB/PR picture. Switch the TV to the input that you can watch  
component video pictures.  
CABLE/SAT  
TV  
DVD  
8 L-1 INPUT ^ VIDEO / S-VIDEO  
VIDEO:  
If a connected appliance’s output is compatible only with regular  
video signals, set to AVIDEOB.  
S-VIDEO:  
If a connected appliance’s output is compatible with Y/C  
signals, set to AS-VIDEOB. You can obtain a high-quality  
picture. (For connection, be sure to use a 21-pin SCART cable  
that is compatible with the Y/C signal.)  
ENTER  
Selection Keys  
FGDE  
NOTES:  
If AL-1 OUTPUTB is set to ASCART S-VIDEOB or ASCART RGBB,  
it is not possible to set AL-1 INPUTB to AS-VIDEOB.  
If AL-2 SELECTB is set to ASAT S-VIDEOB or ADECODERB, it is  
not possible to set AL-1 INPUTB to AS-VIDEOB.  
If AL-2 SELECTB is set to ADECODERB, it is only possible to set  
AL-1 OUTPUTB to ASCART VIDEOB.  
SET UP  
Component video signals are not output from the [L-1 IN/OUT]  
connector.  
When Progressive scan mode is engaged, it is not possible to  
select the setting of AL-1 OUTPUTB. (A pg. 64)  
L-2 Select Setting  
L-1 Output And L-1 Input Setting  
Set AL-2 SELECTB to the appropriate mode depending on the type  
The [L-1 IN/OUT] connector accepts and delivers either a  
composite signal (regular video signal) or a Y/C signal (a signal in  
which the luminance and chrominance signals are separated). Set  
AL-1 OUTPUTB and AL-1 INPUTB to the appropriate mode  
depending on the type of appliance connected to the unit’s [L-1 IN/  
OUT] connector.  
of appliance connected to the unit’s [L-2 IN/DECODER] connector.  
1 Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB on  
the left column.  
2 Press selection keys to select AL-2 SELECTB, then press  
ENTER.  
1 Press SET UP to access the Main Menu screen.  
3 Press selection keys to select  
DVD VIDEO SET UP HDD/DVD/DV SET UP FUNCTION SET UP  
INITIAL SET UP  
the appropriate setting, then  
REC/PLAY SET UP  
DISPLAY SET  
VIDEO IN/OUT  
2 Press selection keys to select AFUNCTION SET UPB, then  
press ENTER.  
MONITOR TYPE  
F-1 INPUT  
4:3LB  
press G.  
VIDEO  
VIDEO  
4 Press SET UP to complete the  
3 Press selection keys to select  
L-1 OUTPUT  
L-1 INPUT  
DVD VIDEO SET UP HDD/DVD/DV SET UP FUNCTION SET UP  
INITIAL SET UP  
setting.  
SCA
VIDEO  
AVIDEO IN/OUTB, then press  
G.  
REC/PLAY SET UP  
DISPLAY SET  
VIDEO IN/OUT  
S-VIDEO  
SAT VIDEO  
DECODER  
L-2 SELECT  
V
MONITOR TYPE  
F-1 INPUT  
4:3LB  
VIDEO  
ENTER  
SELECT  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SET UP  
EXIT  
4 Press selection keys to select  
L-1 OUTPUT  
L-1 INPUT  
SCART VIDEO  
VIDEO  
AL-1 OUTPUTB or AL-1  
VIDEO  
L-2 SELECT  
INPUTB, then press ENTER.  
* The boldface settings below indicate the settings at your purchase.  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SET UP  
EXIT  
ENTER  
SELECT  
8 L-2 SELECT ^ VIDEO / S-VIDEO / SAT VIDEO / SAT S-VIDEO /  
DECODER  
5 Press selection keys to select  
the appropriate setting, then  
press ENTER.  
DVD VIDEO SET UP HDD/DVD/DV SET UP FUNCTION SET UP  
INITIAL SET UP  
Select AVIDEOB or AS-VIDEOB to use this unit as the recording  
deck with the player connected to the [L-2 IN/DECODER]  
connector, or to use the satellite receiver connected to the [L-2 IN/  
DECODER] connector.  
REC/PLAY SET UP  
DISPLAY SET  
VIDEO IN/OUT  
MONITOR TYPE  
F-1 INPUT  
4:3LB  
VIDEO  
6 Press SET UP to complete the  
L-1 OUTPUT  
L-1 INPUT  
SCARTVIDEO  
SCART S-VIDEO  
setting.  
SCART RGB  
COMPONENT  
L-2 SELECT  
VIDEO:  
If a connected appliance’s output is compatible only with regular  
ENTER  
SELECT  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SET UP  
EXIT  
video signals, set to AVIDEOB.  
S-VIDEO:  
* The boldface settings below indicate the settings at your purchase.  
If a connected appliance’s output is compatible with Y/C  
signals, set to AS-VIDEOB. You can obtain high-quality picture.  
(For connection, be sure to use a 21-pin SCART cable that is  
compatible with the Y/C signal.)  
8 L-1 OUTPUT ^ SCART VIDEO / SCART S-VIDEO / SCART  
RGB / COMPONENT  
SCART VIDEO:  
Select ASAT VIDEOB or ASAT S-VIDEOB to view a satellite  
programme with the TV set while the unit is turned off. (A pg. 70)  
If a connected appliance’s input is compatible only with regular  
video signals, set to ASCART VIDEOB.  
SAT VIDEO:  
SCART S-VIDEO:  
If a connected satellite receiver’s output is compatible only with  
regular video signals, set to ASAT VIDEOB.  
If a connected appliance’s input is compatible with Y/C signals,  
set to ASCART S-VIDEOB. You can obtain high-quality picture.  
(For connection, be sure to use a 21-pin SCART cable that is  
compatible with the Y/C signal.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
EDITING  
EN  
65  
SAT S-VIDEO:  
If a connected satellite receiver’s output is compatible with Y/C  
signals, set to ASAT S-VIDEOB. (For connection, be sure to use  
a 21-pin SCART cable that is compatible with the Y/C signal.)  
Digital Audio Dubbing  
You can dub selected audio from a DVD or Audio CD disc to a  
digital audio device.  
DECODER*:  
However, it is not possible to dub copy-protected discs.  
To use a decoder connected to the [L-2 IN/DECODER]  
connector.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
* This setting is not available in the U.K., although it is selectable.  
NOTES:  
If you have a satellite receiver connected to the [L-2 IN/  
DECODER] connector, be sure to set AL-2 SELECTB back to  
appropriate mode after editing.  
Example: Dubbing to an MD  
Recorder  
If you are not connecting a satellite receiver to the [L-2 IN/  
DECODER] connector, leave AL-2 SELECTB set to AVIDEOB.  
When AL-2 SELECTB is set to ASAT VIDEOB and ASAT  
S-VIDEOB, ASATB appears on the TV screen or front display  
panel instead of AL-2B.  
If AL-1 OUTPUTB is set to ASCART S-VIDEOB, it is not possible  
to set AL-2 SELECTB to ADECODERB or ASAT VIDEOB.  
If AL-1 OUTPUTB is set to ASCART RGBB, it is not possible to set  
AL-2 SELECTB to ADECODERB or ASAT S-VIDEOB.  
If AL-1 OUTPUTB is set to ACOMPONENTB and AL-2 SELECTB to  
ASAT VIDEOB, ASAT S-VIDEOB or ADECODERB, be sure to  
connect the [L-1 IN/OUT] connector with a TV.  
If AL-2 SELECTB is set to ASAT S-VIDEOB, be sure to set AL-1  
OUTPUTB to ASCART S-VIDEOB.  
Digital audio device  
(MD deck, etc.)  
Optical cable  
(not supplied)  
Coaxial cable  
(not supplied)  
The S-Video output does not support the satellite receiver  
the satellite receiver.  
To [DIGITAL AUDIO  
OUT (COAXIAL)]  
To [DIGITAL AUDIO  
OUT (OPTICAL)]  
Player  
F-1 Input Setting  
Set AF-1 INPUTB to the appropriate mode depending on the  
connector (VIDEO or S-VIDEO) being used on the front panel.  
1 Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB  
(A pg. 64).  
Rear of unit  
2 Press selection keys to select AF-1 INPUTB, then press  
ENTER.  
3 Press selection keys to select  
DVD VIDEO SET UP HDD/DVD/DV SET UP FUNCTION SET UP  
INITIAL SET UP  
the appropriate setting, then  
REC/PLAY SET UP  
DISPLAY SET  
VIDEO IN/OUT  
press ENTER.  
MONITOR TYPE  
F-1 INPUT  
4:3LB  
Note for connection:  
Remove the protection cap from the optical cable.  
VIDEO  
V
VIDEO  
S-VIDEO  
4 Press SET UP to complete the  
L-1 OUTPUT  
L-1 INPUT  
setting.  
SCART VIDEO  
VIDEO  
L-2 SELECT  
1 Connect the unit and a digital audio device using either an  
ENTER  
SELECT  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SET UP  
EXIT  
optional optical cable or an optional coaxial cable.  
2 Place a disc on the unit and load an MD on the connected  
* The boldface settings below indicate the settings at your purchase.  
digital audio device.  
3 Select the audio to be dubbed.  
8 F-1 INPUT ^ VIDEO / S-VIDEO  
4 Start playback slightly before the actual point from where you  
VIDEO:  
wish to start dubbing.  
When connecting an appliance to the [VIDEO] input connector,  
5 Press W to pause playback.  
set to AVIDEOB.  
6 Select the input mode on the connected digital audio device.  
7 Press I to start playback on the unit.  
S-VIDEO:  
When connecting an appliance to the [S-VIDEO] input  
connector, set to AS-VIDEOB.  
8 Start recording on the digital audio device.  
9 Stop recording on the digital audio device. Then press o to stop  
playback on the unit.  
NOTE:  
There may be a discrepancy of several seconds between where  
you intend editing to start, and where it actually starts.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
EDITING  
EN  
66  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Audio Dubbing (DV Deck Only)  
1 Connect an audio device to the unit’s [AUDIO] input connectors  
on the front panel.  
When using a monaural audio device, connect its AUDIO OUT  
connector to the [AUDIO-L] input connector on your unit.  
This function allows you to record new audio, without erasing the  
original audio, on a DV tape that was recorded with ADV AUDIO  
RECB set to A12BITB (A pg. 72).  
2 Load a Mini DV cassette with the erase protection switch set to  
ATTENTION:  
ARECB.  
You cannot perform Audio Dubbing on a tape that was recorded  
with ADV AUDIO RECB set to A16BITB (A pg. 72), on a tape that  
was recorded at the ALPB speed, or on a blank tape.  
3 Press DV/HDD/DVD SELECT on the unit repeatedly or DV on  
the remote so that the DV lamp lights up on the unit.  
4 Press PR +/– to select AF-1B.  
5 Start playback slightly before the actual point from where you  
Your unit  
Recorder  
wish to start dubbing.  
6 Press W to pause playback.  
7 Press A.DUB to engage the audio dubbing mode.  
Your unit enters the Audio Dubbing Pause mode.  
To perform Audio Dubbing with audio mixing, press AUDIO to  
select AL W X RB at this point. When using the DV deck as the  
recording deck, also make sure that AAUDIO MODEB is set to  
ASOUND1B (A pg. 72).  
PR +/  
-
A.DUB  
To [AUDIO]  
input  
* Audio Dubbing with audio mixing is not possible if you are using a  
monaural audio component, or if you don’t have an audio mixer.  
Audio cable  
(not supplied)  
8 Engage the audio device’s playback, then press I to start the  
tape in the unit. Audio dubbing starts at this point.  
To stop dubbing temporarily, press W. Press I to resume  
dubbing.  
AUDIO OUT  
9 Press o on the unit, then stop playback on the audio device to  
CD player, etc.  
end the audio dubbing.  
NOTES:  
Once the Audio Dubbing starts, you cannot use the other deck.  
When monitoring the audio dubbed sound on the DV deck, set  
AAUDIO MODEB to ASOUND2B (A pg. 72).  
Audio Dubbing is also possible with the [L-1 IN/OUT] or [L-2 IN/  
DECODER] connector on the rear panel. When using these 21-  
pin SCART connectors, be sure to select the correct input mode  
(AL-1B or AL-2B) in step 4.  
CD player, etc.  
When playing back an audio dubbed Mini DV tape on the DV  
deck, set AAUDIO MODEB to ASOUND2B (A pg. 72).  
Audio dubbing is not possible using the [DV IN/OUT] connector.  
Audio dubbing is not possible on a blank portion of the tape.  
Mixer output  
Audio mixer  
Recorder  
Original sound  
[AUDIO OUT]  
Your unit  
PR +/-  
A.DUB  
To  
[AUDIO]  
input  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
EDITING  
EN  
67  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Insert Editing (DV Deck Only)  
1 Make connections.  
Insert Editing replaces the pictures with new ones, while the audio  
soundtrack remains unchanged. For Insert Editing, use your unit  
as the recording deck.  
A If the player has no S-VIDEO output connector:  
^ connect the player’s AUDIO/VIDEO OUT connectors to your  
unit’s [VIDEO/AUDIO ((MONO) L/R)] input connectors on  
the front panel.  
ATTENTION:  
B If the player has an S-VIDEO output connector:  
^ connect the player’s AUDIO OUT and S-VIDEO OUT  
connectors to your unit’s [AUDIO] and [S-VIDEO] input  
connectors on the front panel.  
Insert Editing is not possible with a Mini DV cassette recorded in  
LP mode.  
A If the player has no S-VIDEO output connector:  
2 Load a Mini DV cassette with the erase protection switch set to  
ARECB.  
Your unit  
Recorder  
PR +/-  
3 Press DV/HDD/DVD SELECT on the unit repeatedly or DV on  
the remote so that the DV lamp lights up on the unit.  
4 Press PR +/– to select AF-1B.  
5 Press S, T and W to determine the edit-in point (the  
beginning of the segment to be replaced).  
Be sure to engage the Still mode at the edit-in point.  
To [VIDEO/AUDIO  
((MONO) L/R)] input  
6 Press INSERT to engage the insert editing mode.  
INSERT  
Your unit enters the Insert Pause mode.  
The TV screen changes from the still picture to the input source  
you are going to record.  
Audio/video  
cable  
(not supplied)  
7 Load the source cassette and play back the segment that is to  
be inserted. When you reach the start of the section of the  
source tape that you wish to insert, press I to start the tape in  
your unit. Insert editing begins at this point.  
8 Press o to stop recording on the DV deck to end insert editing.  
AUDIO/VIDEO OUT  
NOTES:  
Once the Insert Editing starts, you cannot use the other deck.  
All necessary cables can be obtained from your dealer.  
Insert Editing cannot be performed on a Mini DV cassette that  
has had its erase protection switch set to ASAVEB.  
When Insert Editing is performed on a tape that has been  
recorded on another video recorder, the inserted portion may  
appear distorted.  
Another recorder  
Player  
B If the player has an S-VIDEO output connector:  
A small portion of the recording which precedes an insert edit  
may become erased.  
Your unit  
PR +/-  
Recorder  
Insert Editing is also possible with the [L-1 IN/OUT] or [L-2 IN/  
DECODER] connector on the rear panel. When using these 21-  
pin SCART connectors, be sure to select the correct input mode  
(AL-1B or AL-2B) in step 4.  
Insert Editing is not possible using the [DV IN/OUT] connector.  
Insert Editing is not possible on a blank portion of the tape.  
To [AUDIO] input  
To [S-VIDEO]  
input  
INSERT  
Audio cable  
(not supplied)  
S-video cable  
(not supplied)  
S-VIDEO OUT  
AUDIO OUT  
Another recorder  
Player  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
REMOTE CONTROL  
EN  
68  
CABLE/SAT  
TV DVD  
Remote Control Functions  
TV AV /VIDEO  
TV d  
Remote Control 1/2/3/4 Code Switching  
A
The remote control is capable of controlling four JVC video units  
independently. Each of the units can respond to one of the four  
codes (1, 2, 3 or 4). The remote control is preset to send code 3  
signals because your unit is initially set to respond to code 3  
signals. You can easily modify your unit to respond to code 1, 2 or  
4 signals.  
TV 8 +/–  
0 – 9  
PR +/–  
ENTER  
SET UP  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
A
I
CABLE/SAT  
TV DVD  
1 – 4  
TV Multi-Brand Remote Control  
Your remote control can operate the basic functions of your TV set.  
In addition to JVC TVs, other manufacturer’s TVs can also be  
controlled.  
Turn off the TV using its remote control.  
Slide the TV/CABLE/SAT/DVD switch to TV.  
ENTER  
IMPORTANT:  
Although the provided remote control unit is compatible with JVC  
televisions, as well as many other models, it may not work with  
your TV, or in some instances, may have limited function capability.  
o
Keep pressing SET UP down during step 1.  
SET UP  
1 Enter your TV’s brand code using the number keys, then press  
ENTER.  
2 Press A on the unit’s remote control to turn on the TV and try  
operations (A step 3).  
Once you have set the remote control to operate the TV, you do  
not have to repeat this step until you replace your remote  
control’s batteries.  
Some brands of TVs have more than one code. If the TV does  
not function with one code, try entering another.  
Keep pressing SET UP down during step 1.  
1 Press the number key A1B for 1, A2B for 2, A3B for 3 or A4B for 4 to  
change the remote control code, then press ENTER.  
3 Press the corresponding buttons to operate the TV: A, TV AV/  
VIDEO, PR +/–, TV8 +/–, TV d, number keys.  
For some brands of TVs, you must press ENTER after having  
pressed the number keys.  
2 Press A on the unit to turn off the unit.  
3 Press I on the unit for over 5 seconds while the unit is turned  
off. The current code appears on the front display panel.  
4 Press o on the remote control to change the unit’s code. The  
new code blinks on the front display panel for approximately 5  
seconds, and is applied to the unit.  
NOTE:  
When APOWER SAVEB is set to AONB (A pg. 73), it is not possible  
to change the remote code.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
REMOTE CONTROL  
EN  
69  
BRAND NAME  
CODE  
BRAND NAME  
CODE  
JVC  
72, 73  
01, 23, 24, 25  
JVC  
FERGUSON  
FINLUX  
FUNAI  
60, 61, 62, 63, 92  
81  
85  
27  
30  
32  
AMSTRAD  
CANAL +  
D-BOX  
LG/GOLDSTAR  
GRUNDIG  
HITACHI  
ITT  
MITSUBISHI  
MIVAR  
82  
68  
89  
88  
64, 65  
64  
68  
70, 71  
68  
93  
18  
19  
10  
28  
03  
29  
20  
31  
ECHOSTAR (VIA DIGITAL)  
FINLUX  
FORCE  
GALAXIS  
GRUNDIG  
HIRSCHMANN  
ITT NOKIA  
KATHREIN  
LUXOR  
MASCOM  
MASPRO  
NOKIA  
PACE  
PANASONIC  
PHILIPS  
RFT  
SAGEM  
NEC  
NOKIA  
PANASONIC  
PHILIPS  
RCA  
SAMSUNG  
SANYO  
SHARP  
SONY  
THOMSON  
TOSHIBA  
04, 11  
02  
05  
12, 33, 34, 35  
13, 16  
06  
07  
26  
70  
87  
67, 86, 92  
13, 14, 74  
66, 84  
69  
83  
08, 14  
68  
05, 24  
92  
69  
83  
SALORA  
SAMSUNG  
SKY DIGI BOX  
SKYMASTER  
TPS  
Satellite Receiver Multi-Brand Remote Control  
Your remote control can operate the basic functions of your  
satellite receiver set. In addition to JVC satellite receivers, other  
manufacturer’s satellite receivers can also be controlled.  
91  
64  
TRIAX  
WISI  
Slide the TV/CABLE/SAT/DVD switch to CABLE/SAT.  
IMPORTANT:  
Although the provided remote control unit is compatible with JVC  
satellite receivers, as well as many other models, it may not work  
with your satellite receiver, or in some instances, may have limited  
function capability.  
Keep pressing SET UP down during step 1.  
1 Enter your satellite receiver’s brand code using the number  
keys, then press ENTER.  
2 Press A on the unit’s remote control to turn on the satellite  
receiver and try operations (A step 3).  
Once you have set the remote control to operate the satellite  
receiver, you do not have to repeat this step until you replace  
your remote control’s batteries.  
Some brands of satellite receivers have more than one code. If  
the satellite receiver does not function with one code, try  
entering another.  
3 Press the corresponding buttons to operate the satellite  
receiver: A, PR +/–, number keys.  
For some brands of satellite receivers, you must press ENTER  
after having pressed the number keys.  
The number keys may not function with some satellite  
receivers.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SYSTEM CONNECTIONS  
EN  
70  
Connecting To A Satellite Receiver  
Connecting To A Dolby Digital Decoder  
Or An Amplifier With Built-in DTS  
Connect the satellite receiver to the [L-2 IN/DECODER] connector,  
then connect the [L-1 IN/OUT] connector to the TV’s connector.  
These instructions enable you to connect your unit to a Dolby  
Digital Decoder or an amplifier with built-in DTS.  
NOTES:  
Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg. 64)  
You can use the Automatic Satellite Programme Recording  
function (A pg. 50) with this connection. (HDD deck only)  
To record a programme via the satellite receiver, select L-2 mode  
by pressing PR +/– so that AL-2B appears on the front display  
panel.  
For details, refer to the instruction manual of the satellite receiver.  
Outdoor unit  
Aerial  
Dolby Digital Decoder or  
amplifier with built-in DTS  
TV aerial cable  
Satellite cable  
Satellite receiver  
To DIGITAL AUDIO input  
ANTENNA IN  
ANTENNA OUT  
Coaxial cable  
(not supplied)  
Optical cable  
(not supplied)  
To [DIGITAL AUDIO  
OUT (COAXIAL)]  
To [DIGITAL AUDIO  
OUT (OPTICAL)]  
TV  
Rear of unit  
Note for connection:  
Remove the protection cap from the optical cable.  
1 Connect the unit and a Dolby Digital Decoder or an amplifier  
with built-in DTS using either an optional optical cable or an  
optional coaxial cable.  
NOTES:  
IMPORTANT  
For Dolby Digital sound, set ADIGITAL AUDIO OUTB to ADOLBY  
DIGITAL/PCMB. (A pg. 71)  
For DTS sound, set ADIGITAL AUDIO OUTB to ASTREAM/PCMB.  
(A pg. 71)  
When you set AL-2 SELECTB to ASAT VIDEOB or ASAT  
S-VIDEOB (A pg. 64), it is possible to view a satellite broadcast  
with the TV set to its AV mode even if the unit is turned off. When  
the unit is in Stop mode or recording, press TV AV/VIDEO on the  
remote control to turn off the VIDEO indicator on the front  
display panel.  
If you turn on the unit when the satellite receiver’s power is off,  
nothing appears on the TV screen. In this case, turn on the  
satellite receiver, or set the TV to its TV mode, or press TV AV/  
VIDEO on the remote control to set the unit to the AV mode.  
CAUTIONS:  
This unit has a dynamic range of more than 110 dB with regards  
to its Hi-Fi audio capability. It is recommended that you check the  
maximum level if you are going to listen to the Hi-Fi audio signals  
through a stereo amplifier. A sudden surge in the input level to  
the speakers may damage them.  
Some speakers and televisions are specially shielded to prevent  
television interference. If both are of the non-shielded type, do not  
place the speakers adjacent to the TV set as this can adversely  
affect the playback picture.  
When you can’t switch the audio channel of a bilingual  
programme  
When the unit is connected with a digital audio device using an  
optional optical cable and ADIGITAL AUDIO OUTB is set to  
ADOLBY DIGITAL/PCMB, it is not possible to switch the audio  
channel of a bilingual programme recorded on a DVD-RAM or  
DVD-RW (VR mode) disc. In this case, perform the following steps  
using the remote control to switch ADIGITAL AUDIO OUTB from  
ADOLBY DIGITAL/PCMB to APCM ONLYB.  
A Press SET UP to access the Main Menu screen.  
B
C
Press selection keys to select  
A
DVD VIDEO SET UP  
B
, then press  
G.  
Press selection keys to select  
A
AUDIO OUTPUT , then press  
B
G.  
D Press selection keys to select ADIGITAL AUDIO OUTB, then  
press ENTER.  
E Press selection keys to select APCM ONLYB, then press  
ENTER. (A pg. 71)  
F Press SET UP to complete the setting.  
G Press AUDIO to select the desired audio channel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
SUBSIDIARY SETTINGS  
EN  
71  
* The boldface settings below indicate the settings at your purchase.  
Mode Set  
AUDIO OUTPUT  
8 DIGITAL AUDIO OUT ^ DOLBY DIGITAL/PCM / STREAM/  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
PCM / PCM ONLY  
Set to the appropriate mode according to the type of the device  
connected to [DIGITAL AUDIO OUT] connector.  
DOLBY DIGITAL/PCM:  
CABLE/SAT  
TV  
DVD  
Select this when you connect the digital input connector of a  
Dolby Digital Decoder or an amplifier with a built-in Dolby Digital  
Decoder.  
HDD  
DVD  
STREAM/PCM:  
Select this when you connect the digital input connector of an  
amplifier with a built-in DTS, Dolby Digital, or MPEG  
multichannel decoder.  
PCM ONLY:  
Select this when you connect the linear PCM digital input of  
other audio equipment (amplifier, MD or DAT deck, etc.).  
ENTER  
Selection Keys  
FGDE  
NOTES:  
This setting also functions when HDD is active.  
If you watch or play back a title which contains multiple audio  
languages, select APCM ONLYB in advance and choose main or  
sub audio with AUDIO.  
8 ANALOG AUDIO OUT ^ STEREO / DOLBY SURROUND  
Select the appropriate setting to accommodate the unit to the  
connected A/V equipment. This function takes effect when a  
DVD VIDEO disc is played back.  
SET UP  
AUDIO  
STEREO:  
Select this when listening to conventional two-channel stereo  
audio with the unit’s [AUDIO OUT] connectors connected to a  
stereo amplifier/receiver or TV set, or in case you want to  
record the audio from a DVD VIDEO disc to a Mini Disc, etc.  
Various modes of this unit are categorized into menus nested in 2  
levels shown in the following table. To change the settings of these  
modes, find the desired mode in the menu (for details on each  
menu, see pages 71 through 73), then follow the procedure below.  
DOLBY SURROUND:  
Select this when listening to multichannel surround audio with  
the unit’s [AUDIO OUT] connectors connected to an amplifier/  
receiver with a built-in surround decoder or a surround decoder.  
DVD VIDEO SET UP  
LANGUAGE SET (A pg. 22)  
AUDIO OUTPUT (See right column)  
PARENTAL LOCK (A pg. 33)  
DISC PLAY SET UP (A pg. 72)  
8 D. RANGE CONTROL ^ NORMAL / WIDE RANGE / TV MODE  
The dynamic range (the difference between the loudest sound and  
the quietest one) can be compressed during playback of a  
programme encoded in Dolby Digital format.  
This function takes effect when a DVD VIDEO disc recorded in  
Dolby Digital format is played back at low or middle volume.  
HDD/DVD/DV SET UP HDD SET UP (A pg. 72)  
DVD SET UP (A pg. 72)  
DISC SET UP (A pg. 78, 79)  
DV SET UP (A pg. 72)  
NORMAL:  
FUNCTION SET UP  
INITIAL SET UP  
REC/PLAY SET UP (A pg. 72)  
DISPLAY SET (A pg. 73)  
VIDEO IN/OUT (A pg. 23, 64)  
Normally select this setting to activate this function.  
WIDE RANGE:  
Select this to deactivate this function when you enjoy wide  
dynamic range programme.  
TUNER SET (A pg. 74)  
CLOCK SET (A pg. 77)  
TV MODE:  
Select this when you hear the sound through the TV’s  
speaker(s).  
The procedure below shows how to set the desired option of the  
AAUDIO RECB mode as an example.  
NOTES:  
This function has no effect on programmes other than those  
recorded in Dolby Digital format.  
1 Press HDD or DVD so that the HDD or DVD lamp lights up on  
the unit.  
This function does not work when Simulated Surround Effect is  
activated. (A pg. 31)  
The effect of ANORMALB and AWIDE RANGEB may not be  
different depending on discs.  
2 Press SET UP to access the Main Menu screen.  
3 Press selection keys to select AFUNCTION SET UPB, then  
press G.  
4 Press selection keys to select  
DVD VIDEO SET UP HDD/DVD/DV SET UP FUNCTION SET UP  
DISPLAY SET  
REC/PLAY SET UP VIDEO IN/OUT  
INITIAL SET UP  
8 OUTPUT LEVEL ^ STANDARD / LOW  
AREC/PLAY SET UPB, then  
press G.  
You can lower the output level of analogue audio to accommodate  
the unit to the connected A/V equipment.  
XP MODE REC AUDIO  
DOLBY DIGITAL  
AUDIO REC  
DIRECT REC  
JUMP TIME  
NICAM  
OFF  
5 Press selection keys to select  
AAUDIO RECB, then press  
ENTER.  
STANDARD:  
15 MIN  
Normally select this setting.  
LOW:  
ENTER  
SELECT  
SET UP  
EXIT  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
6 Press selection keys to select  
the desired option, then press  
ENTER.  
The output level of analogue audio is lowered.  
7 Press SET UP to complete the setting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
SUBSIDIARY SETTINGS  
EN  
72  
DISC PLAY SET UP  
ATTENTION:  
When SET UP is pressed while in the DV deck mode, the unit  
will switch to the previous deck mode (HDD or DVD). To proceed  
to DV deck after changing the settings in the ADV SET UPB  
menu, press DV/HDD/DVD SELECT on the unit repeatedly or  
DV on the remote control to select the DV deck.  
8 RESUME ^ OFF / ON / DISC RESUME  
When this function is set to AONB or ADISC RESUMEB, you can use  
the resume function. (A pg. 26)  
OFF:  
You cannot use the resume function.  
ON:  
DV SET UP  
You can start playback from the resume point of the placed disc.  
8 DV AUDIO REC ^12BIT / 16BIT  
DISC RESUME:  
This is the setting for sound mode before recording on a Mini DV  
tape.  
The unit retains a memory of the resume points of the last 30  
discs played back, even though they have been ejected.  
12BIT:  
NOTE:  
Enables Audio Dubbing later.  
ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD and  
already finalised DVD-R/DVD-RW (video mode) discs. For other  
types of discs, the function under AONB setting will be applied even  
16BIT:  
Audio Dubbing is not possible but the recorded sound quality is  
higher than A12BITB.  
8 AUDIO MODE ^ SOUND1 / SOUND2 / MIX  
You can select the desired sound mode when playing back an  
audio dubbed Mini DV tape.  
HDD SET UP  
8 LIVE MEMORY ^ OFF / 30 MIN / 1 HR / 3 HR  
When this function is set to A30 MINB, A1 HRB or A3 HRB, you can  
apply the selected time length to ATemporary recording for Live  
SOUND1:  
Original recorded sound.  
SOUND2:  
Audio dubbed sound.  
DVD SET UP  
MIX:  
8 SAVE AS LIBRARY ^ OFF / ON  
Original recorded sound and audio-dubbed sound.  
When this function is set to AONB, the recording information is  
automatically stored in the library. For details, refer to ANavigate  
Library InformationB (A pg. 56).  
NOTES:  
When AAUDIO MODEB is set to AMIXB, both the main and sub  
audio will be audible for bilingual tapes.  
To select only the main audio or only the sub audio of bilingual  
tapes, set AAUDIO MODEB to ASOUND1B.  
8 CONTINUOUS PLAY ^ OFF / ON  
When this function is set to AONB, multiple titles on a disc are  
played back continuously one after another.  
REC/PLAY SET UP  
8 XP MODE REC AUDIO ^ DOLBY DIGITAL / LINEAR PCM  
You can select the audio format when you record a title in XP  
mode. When this function is set to ALINEAR PCMB, you can obtain  
a high-quality audio sound.  
8 VIDEO MODE RECORDING ASPECT ^ PRIORITIZE 4:3 /  
PRIORITIZE 16:9  
This is the setting for the aspect ratio used when you dub titles to  
DVD discs in video mode. If the titles you want to dub are recorded  
in both 16:9 and 4:3, you must select one aspect ratio.  
DOLBY DIGITAL:  
PRIORITIZE 4:3:  
To record in Dolby Digital format.  
If you select APRIORITIZE 4:3B, even a title recorded in 16:9 is  
LINEAR PCM:  
dubbed in 4:3.  
To record in Linear PCM format.  
PRIORITIZE 16:9:  
If you select APRIORITIZE 16:9B, even a title recorded in 4:3 is  
8 AUDIO REC ^ NICAM / MONO  
dubbed in 16:9.  
You can select the desired NICAM audio channel to be recorded  
on a DVD-R/RW (Video mode) disc.  
8 VIDEO MODE RECORDING AUDIO ^ MAIN / SUB  
This is the setting for the audio channel to be selected when  
dubbing titles to DVD discs in video mode. Select either one of the  
two settings if the titles to be dubbed have two audio channels.  
NICAM:  
To record the main and sub language of NICAM audio.  
MONO:  
To record the standard (monaural) sound of NICAM audio.  
MAIN:  
NOTE:  
Select this to dub the main channel.  
This function works only for the NICAM bilingual programme.  
SUB:  
Select this to dub the sub channel.  
8 DIRECT REC ^ OFF / ON  
When this function is set to AONB, you can easily start recording the  
programme that you are watching on your TV. While holding R,  
8 MP3 & WMA / JPEG ^ MP3 & WMA / JPEG  
You can select files to play back, when both MP3&WMA files and  
JPEG files are recorded on a disc.  
NOTES:  
MP3 & WMA:  
When you use the Direct Rec function, be sure to use a TV  
offering T-V LINK, etc. and connect a fully-wired 21-pin SCART  
cable between the unit and the TV. (A pg. 18)  
If ADIRECT RECB is set to AOFFB, the R button functions as  
described in ABasic RecordingB (A pg. 34, 37).  
During Direct Rec, A– –B appears on the front display panel.  
If a programme is recorded with the Direct Rec, the station name  
will not be registered in the library. A– – – –B will be displayed for  
the station name.  
Select this to play back MP3/WMA files.  
JPEG:  
Select this to play back JPEG files.  
Even if there is no power supply for more than 60 minutes, the  
unit keeps the setting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                 
SUBSIDIARY SETTINGS  
EN  
73  
8 JUMP TIME ^ 15 MIN / 30 MIN / 1 HR  
You can locate a scene ahead of or behind the currently viewed  
one by jumping a selected time interval during playback (or Live  
Memory Playback). For details, refer to AJump SearchB (A pg. 26,  
40).  
DISPLAY SET  
8 SUPERIMPOSE ^ AUTO / OFF  
When this function is set to AAUTOB, various operational indicators  
appear on the TV screen.  
AUTO:  
To superimpose operational indications for approximately five  
seconds just after the corresponding operation.  
OFF:  
To turn off superimposed indications.  
NOTES:  
When you use this unit as the source player for editing, be sure to  
set ASUPERIMPOSEB to AOFFB before starting. (A pg. 63)  
When you select AAUTOB, during playback, the operation mode  
indicators may be disturbed depending on the type of disc being  
used.  
8 BLUE BACK ^ OFF / ON  
When this function is set to AONB, the TV screen becomes all blue  
when receiving a channel not in use.  
NOTE:  
When you want to receive an unstable channel with poor signals,  
set this function to AOFFB.  
8 DIMMER ^ BRIGHT / DIMMED  
You can change the brightness of the front display panel.  
BRIGHT:  
Normally select this.  
DIMMED:  
To dim the front display panel. (Blue lamp on the front display  
panel is turned off.)  
8 POWER SAVE ^ OFF / ON  
When this function is set to AONB, you can reduce the power  
consumption while the unit is turned off.  
NOTES:  
During Power Save mode ^  
^ the front display panel will be turned off.  
^ the Just Clock function (A pg. 77) does not work.  
Power Save does not work when ^  
^ the unit is in the Timer mode.  
^ the Automatic Satellite Programme Recording mode is  
engaged. (A pg. 50)  
^ AL-2 SELECTB is set to ADECODERB, ASAT VIDEOB or ASAT  
S-VIDEOB. (A pg. 64)  
It takes some time for the unit to complete initialisation after you  
turn on the unit power, with AWAKE UPB blinking on the front  
display panel.  
8 ON SCREEN LANGUAGE  
This unit offers you the choice to view on-screen messages in 10  
different languages. You can change the language setting  
manually as required.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
SUBSIDIARY SETTINGS  
EN  
74  
Tuner Set  
Your unit needs to memorise all necessary stations in channel  
positions in order to record TV programmes. Auto Channel Set  
automatically assigns all receivable stations in your area to call  
them up by using the PR +/– buttons without going through any  
vacant channels.  
IMPORTANT:  
Normally, Auto Set Up (A pg. 19), Preset Download (A pg. 20)  
or Auto Channel Set (A pg. 74) sets the Guide Programme  
numbers automatically. You need to set the Guide Programme  
numbers manually only in the following cases.  
When timer programming with the VIDEO Plus+ system, the  
channel position, where the station you wish to record is  
received on your unit, is not selected,  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
OR  
CABLE/SAT  
when you add a channel after Auto Set Up, Preset Download  
or Auto Channel Set has taken place,  
TV  
DVD  
^ Set the Guide Programme number for that station manually.  
When you wish to timer record a satellite programme with the  
VIDEO Plus+ system,  
^ Set the Guide Programme numbers for all satellite  
broadcasts received on your satellite receiver.  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
ENTER  
Selection Keys  
FGDE  
Guide Programme Number Set  
1 Press SET UP to access the Main Menu screen.  
2 Press selection keys to select AINITIAL SET UPB, then press  
G.  
SET UP  
3 Press selection keys to select  
DVD VIDEO SET UP HDD/DVD/DV SET FUNCTION SET UP  
INITIAL SET UP  
ATUNER SETB, then press G.  
TUNER SET  
CLOCK SET  
AUTO CH SET  
MANUAL CH SET  
4 Press selection keys to select  
AGUIDE PROG SETB, then  
press ENTER.  
GUIDE PROG SET  
11  
12  
13  
ENTER  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SET UP  
EXIT  
SELECT  
IMPORTANT:  
Perform the following steps only if ^  
^ Auto Channel Set has not been set correctly by Auto Set Up  
or by Preset Download. (A pg. 19, 20)  
5 Press selection keys to select  
AGUIDE PROGB, then press  
ENTER.  
11  
12  
13  
INITIAL SET UP > GUIDE PROG SET  
GUIDE PROG  
TV PROG  
1
YLE2  
1
^ you have moved to a different area or if a new station starts  
broadcasting in your area.  
6 Press selection keys to select  
the Guide Programme number  
for the desired station as  
shown in the TV listings. Then  
press ENTER.  
RETURN  
ENTER  
Auto Channel Set  
SET UP  
EXIT  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SELECT  
1 Press SET UP to access the Main Menu screen.  
7 Press selection keys to select  
2 Press selection keys to select AINITIAL SET UPB, then press  
ATV PROGB, then press ENTER. Press selection keys to select  
the number of the unit’s channel position on which the Guide  
Programme number’s broadcast is received by the unit or the  
satellite receiver. Then press ENTER.  
G.  
3 Press selection keys to select ATUNER SETB, then press G.  
4 Press selection keys to select  
DVD VIDEO SET UP HDD/DVD/DV SET FUNCTION SET UP  
INITIAL SET UP  
Repeat steps 5 7 as necessary.  
AAUTO CH SETB, then press  
ENTER.  
TUNER SET  
CLOCK SET  
8 Press SET UP to complete the setting.  
AUTO CH SET  
MANUAL CH SET  
When you have connected the  
via a fully-wired 21-pin SCART  
cable (A pg. 18), the unit  
automatically performs the  
Preset Download and the T-V  
LINK screen will appear.  
(A pg. 20)  
Guide Programme Number  
GUIDE PROG SET  
11  
AGuide Programme (GUIDE PROG) numberB refers to the  
assigned TV station numbers, according to broadcast area, for  
the VIDEO Plus+ timer recording. The Guide Programme  
Numbers can be found in most TV listings.  
12  
13  
ENTER  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SET UP  
EXIT  
SELECT  
INITIAL SET UP > AUTO SET  
The Auto Set screen appears,  
and remains on screen while  
the unit searches for  
AUTO SET  
PLEASE WAIT...  
CANCEL  
receivable stations.  
ENTER  
SET UP  
EXIT  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SELECT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
SUBSIDIARY SETTINGS  
EN  
75  
5 View the Confirmation screen.  
Manual Channel Set  
AAUTO SET COMPLETEDB or ASCAN COMPLETEDB is  
displayed on the TV screen. Select AOKB.  
Store channels that were not stored during Auto Set Up  
(A pg. 19), Preset Download (A pg. 20) or Auto Channel Set  
(A pg. 74).  
6 Press SET UP to complete the setting.  
Using the Confirmation screen, you can skip or add channel  
positions, enter station names and perform other operations.  
Refer to pages 75 – 76 for the procedures.  
1 Press SET UP to access the Main Menu screen.  
2 Press selection keys to select AINITIAL SET UPB, then press  
Depending on reception conditions, the stations may not be  
stored in order, and the station names may not be stored  
correctly.  
G.  
3 Press selection keys to select ATUNER SETB, then press G.  
4 Press selection keys to select AMANUAL CH SETB, then press  
ENTER. The Manual Channel Set screen appears.  
IMPORTANT:  
In certain reception conditions, station names may not be  
stored correctly, and Auto Guide Programme Number Set may  
not work properly. When the Guide Programme numbers are  
not set properly, the programme that you do not intended to  
record will be timer recorded by the VIDEO Plus+ system of the  
unit. When programming the timer using the VIDEO Plus+  
system, be sure to check the desired channel is selected  
correctly. (A pg. 46)  
Your unit memorises all receivable stations even if reception of  
some of them is poor. You can delete those stations with an  
ChannelB)  
5 Press selection keys to select AEDITB, then press ENTER.  
6 Press selection keys to select  
(Example) To store in position 6.  
a blank position in which you  
INITIAL SET UP > MANUAL CH SET  
want to store a channel, then  
press ENTER. The  
Confirmation screen appears.  
CH  
ID  
CH  
ID  
PR  
01  
02  
PR  
07  
08  
26  
33  
23  
30  
37  
BBC1  
BBC2  
----  
----  
03  
04  
05  
06  
ITV  
09  
10  
11  
12  
----  
----  
----  
----  
CH4  
CH5  
----  
7 Press selection keys to select  
ABANDB, then press ENTER.  
<
>
MOVE  
EDIT  
RETURN  
The programme currently  
received on the selected channel  
position appears behind the  
confirmation screen.  
NOTES:  
Fine tuning is performed automatically during Auto Channel Set.  
If you want to perform tuning manually, refer to AFine-Tuning  
Channels Already StoredB (A pg. 76).  
8 Press selection keys to  
change the band between CH  
(regular) and CC (cable), then  
press ENTER.  
INITIAL SET UP > MANUAL CH SET  
BAND  
CH  
CC  
21  
If you perform Auto Channel Set when the aerial cable is not  
connected properly, ASCAN COMPLETED –NO SIGNAL–B  
appears on the TV screen in step 5. In such a case, make sure of  
the aerial connection and press ENTER; Auto Channel Set will  
start again.  
ID  
FINE  
9 Press selection keys to select  
OFF  
DECODER  
ACHB, then press ENTER.  
RETURN  
ENTER  
SET UP  
EXIT  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
10Press selection keys to  
input the channel number  
you want to store.  
SELECT  
To enter the registered station name (A pg. 88), press  
selection keys to select AIDB, then press ENTER. Press F G.  
For fine tuning adjustment, press selection keys to select  
AFINEB, then press ENTER. Press F G to perform fine-tuning.  
When AL-2 SELECTB is set to AVIDEOB, AS-VIDEOB, ASAT  
VIDEOB or ASAT S-VIDEOB, the ADECODERB setting cannot  
11Press ENTER to enter new channel information. The  
Confirmation screen appears.  
12Press SET UP or RETURN to close the Confirmation screen.  
To change positions, see AChange Station Channel PositionB  
(A pg. 76).  
If you wish to set station names other than the ones registered  
in your unit, see ASet Stations (B)B (A pg. 76).  
ATTENTION:  
Guide Programme numbers are not set when channels are  
stored manually. (A pg. 74, AVIDEO Plus+ System SetupB)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
SUBSIDIARY SETTINGS  
EN  
76  
Delete A Channel  
Set Stations (B)  
Set station names other than the ones registered in your unit.  
1 Perform steps 1 5 of AManual Channel SetB (A pg. 75).  
2 Press selection keys to select the channel you want to delete.  
1 Perform steps 1 5 of AManual Channel SetB (A pg. 75).  
2 Press selection keys to select the channel you want to modify,  
3 Press CANCEL(L) to delete a channel. The channel next to the  
then press ENTER. The Confirmation screen appears.  
cancelled one moves up one line.  
Repeat steps 2 3 as necessary.  
3 Press selection keys to select AIDB, then press ENTER.  
4 Press SET UP or RETURN to close the Confirmation screen.  
4 Press selection keys to select the desired characters (A–Z, 0–  
9, –, Z, +, & (space)), then press ENTER.  
Enter the remaining characters the same way (maximum of 4).  
Change Station Channel Position  
5 After entering all characters, press selection keys to select  
1 Perform steps 1 4 of AManual Channel SetB (A pg. 75).  
2 Press selection keys to select AMOVEB, then press ENTER.  
AOKB, then press ENTER.  
6 Press RETURN to return to the Manual Channel Set screen.  
Repeat steps 2 5 as necessary.  
3 Press selection keys to select the channel you want to move,  
then press ENTER.  
7 Press SET UP or RETURN to close the Confirmation screen.  
4 Press selection keys to select the new channel position, then  
press ENTER.  
Example: If you moved the station in position 4 to position 2, the  
stations originally in positions 2 and 3 each move down  
one space.  
NOTE:  
The characters available for the station name (ID) are A–Z, 0–9, –,  
Z, +, & (space) (maximum of 4).  
Fine-Tuning Channels Already Stored  
INITIAL SET UP > MANUAL CH SET  
INITIAL SET UP > MANUAL CH SET  
CH  
ID  
CH  
CH  
ID  
ID  
CH  
PR  
01  
02  
PR  
ID  
PR  
01  
02  
PR  
1 Perform steps 1 5 of AManual Channel SetB (A pg. 75).  
26  
23  
BBC1  
ITV  
07  
08  
09  
10  
11  
12  
----  
----  
----  
----  
----  
----  
26  
33  
23  
BBC1  
BBC2  
07  
08  
09  
10  
11  
12  
----  
----  
----  
----  
----  
----  
2 Press selection keys to select the channel you want to fine-  
03  
04  
05  
06  
30  
33  
37  
CH4  
BBC2  
CH5  
----  
03  
04  
05  
06  
ITV  
tune, then press ENTER. The Confirmation screen appears.  
30  
CH4  
CH5  
----  
37  
3 Press selection keys to select AFINEB, then press ENTER.  
4 Press F G until the picture appears in its best quality, then  
<
>
EDIT  
RETURN  
<
>
MOVE  
MOVE  
EDIT  
RETURN  
press ENTER.  
Repeat steps 2 4 as necessary.  
Repeat steps 3 4 as necessary.  
5 Press RETURN to return to the Manual Channel Set screen.  
6 Press SET UP or RETURN to close the Confirmation screen.  
5 Press SET UP or RETURN to close the Confirmation screen.  
Set Stations (A)  
Set station names that are registered in your unit.  
1 Perform steps 1 5 of AManual Channel SetB (A pg. 75).  
2 Press selection keys to select the channel you want to modify,  
then press ENTER. The Confirmation screen appears.  
3 Press selection keys to select AIDB, then press ENTER.  
4 Move the arrow to the left ID selection column. Registered  
station names (ID) (A pg. 88) appear as you press F G.  
5 Press ENTER to select the desired ID, then press ENTER again  
to select AOKB.  
6 Press RETURN to return to the Manual Channel Set screen.  
Repeat steps 2 5 as necessary.  
7 Press SET UP or RETURN to close the Confirmation screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                 
SUBSIDIARY SETTINGS  
EN  
77  
6 Press selection keys to select ATV PROGRAMMEB, then press  
ENTER. Press selection keys to set the channel position to the  
number representing the station transmitting clock setting data,  
then press ENTER.  
The unit is preset to receive clock setting and adjustment data  
from channel position 1.  
IMPORTANT:  
If you performed Auto Set Up (A pg. 19) or Preset Download  
(A pg. 20), without ever having set the clock previously, the  
unit’s built-in clock is also set automatically.  
Perform the following steps only if ^  
7 Press SET UP to start the clock operation.  
NOTES:  
Just Clock (when set to AONB) adjusts the unit’s built-in clock  
every hour, except for 23:00, 0:00, 1:00 and 2:00.  
Just Clock is not effective when:  
^ Auto Clock Set has not been performed correctly by Auto Set  
Up or Preset Download.  
OR  
^ the unit’s power is on.  
^ the unit is in the Timer mode.  
^ a difference of more than 3 minutes exists between the built-in  
clock’s time and the actual time.  
^ you want to change Just Clock setting. (See AJust ClockB in  
the right column)  
^ the unit is in the Automatic Satellite Programme Recording  
mode. (A pg. 50) (HDD deck only)  
^ the unit is in the Power Save mode. (A pg. 73)  
^ AL-2 SELECTB is set to ASAT VIDEOB or ASAT S-VIDEOB.  
(A pg. 64)  
If Just Clock is set to AONB, the unit’s clock is automatically  
adjusted at the start/end of Summer Time.  
Just Clock may not function properly depending on the reception  
condition.  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
CABLE/SAT  
TV  
DVD  
Just Clock  
The Just Clock function provides accurate time keeping through  
automatic adjustments at regular intervals, by reading data from a  
PDC signal.  
The Just Clock option can be set to AONB or AOFFB at the Clock Set  
screen (the default setting is AOFFB).  
ENTER  
Selection Keys  
FGDE  
IMPORTANT:  
If you turn off Just Clock, the accuracy of your unit’s built-in clock  
may be reduced, which could adversely affect timer recording. We  
recommend you to keep Just Clock on. In cases where the clock  
setting data from a PDC signal is incorrect, however, you are  
advised to keep Just Clock set to AOFFB.  
SET UP  
1 Press SET UP to access the Main Menu screen.  
2 Press selection keys to select AINITIAL SET UPB, then press  
G.  
3 Press selection keys to select  
DVD VIDEO SET UP HDD/DVD/DV SET UP FUNCTION SET UP  
INITIAL SET UP  
ACLOCK SETB, then press G.  
TUNER SET  
CLOCK SET  
4 Press selection keys to select  
AYEARB, then press ENTER.  
Press selection keys to set  
the year, then press ENTER.  
Repeat the same procedure to  
set the date and time.  
YEAR  
2004  
DATE  
01. 01 THU  
TIME  
--:--  
OFF  
1
JUST CLOCK  
TV PROGRAMME  
ENTER  
SELECT WITH @ THEN PRESS [ENTER]  
PRESS [SET UP] TO EXIT  
SET UP  
EXIT  
SELECT  
When you set the date, press  
and hold F G to change the date by 15-day intervals.  
When you set the time, press and hold F G to change the time  
by 30-minute intervals.  
5 Press selection keys to select AJUST CLOCKB, then press  
ENTER. Press selection keys to set to the desired mode, then  
press ENTER.  
The default setting is AOFFB.  
For the Just clock function, refer to AJust ClockB on the right  
column.  
If you set to AOFFB, you can disregard the next step as you  
won’t be able to receive regular clock adjustments.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
SUBSIDIARY SETTINGS  
EN  
78  
Format A DVD-RAM Disc  
Format A Disc (DVD Deck Only)  
1 Press HDD or DVD so that the HDD or DVD lamp lights up on  
the unit.  
2 Press SET UP to access the Main Menu screen.  
Some DVD-RAM/RW discs are unformatted.  
Format the disc when you use an unformatted disc or you want to  
delete all recordings and data on the disc.  
3 Press selection keys to select AHDD/DVD/DV SET UPB, then  
press G.  
4 Press selection keys to select  
DVD VIDEO SET UP HDD/DVD/DV SET UP FUNCTION SET UP  
INITIAL SET UP  
DV SET UP  
ADISC SET UPB, then press G.  
HDD SET UP  
DVD SET UP  
DISC SET UP  
ATTENTION:  
FINALISE  
Video  
CANC. FINALIS.  
5 Press selection keys to select  
AFORMATB, then press  
ENTER. Press selection keys  
to select AOKB, then press  
ENTER.  
When a disc is formatted, all recordings and data are erased. It  
is impossible to restore them.  
FORMAT  
Never turn off the unit or disconnect the mains power cord  
while ANOW FORMATTING...B is displayed on the TV screen.  
ENTER  
SET UP  
EXIT  
SELECT WITH @ THEN PRESS [ENTER]  
SELECT  
6 Press selection keys to select  
AEXECUTEB, then press  
ENTER.  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Load a DVD-RAM/RW disc to format.  
Format A DVD-RW Disc  
1 Perform steps 1 to 4 of AFormat A DVD-RAM DiscB as above  
CABLE/SAT  
before continuing.  
TV  
DVD  
2 Press selection keys to select AFORMATB, then press ENTER.  
Press selection keys to choose AVR MODEB or AVIDEO  
MODEB, then press ENTER when ADISC WILL BE  
FORMATTEDB appears on the TV screen.  
HDD  
DVD  
AVR MODEB:  
To be chosen when you want to record, erase, or edit data on  
the disc repeatedly.  
AVIDEO MODEB:  
ENTER  
To be chosen when you want to erase all the data on the disc  
once played back to record new data, or play back the disc on  
other DVD players.  
Selection Keys  
FGDE  
3 Press selection keys to select AEXECUTEB, then press  
ENTER.  
NOTES:  
It is impossible to format Version 1.0 DVD-RW discs in Video  
mode.  
SET UP  
It is impossible to format DVD-R discs.  
All the titles on a disc will be deleted once the disc is formatted  
even if they are protected titles. (A pg. 53)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
SUBSIDIARY SETTINGS  
EN  
79  
Finalise A DVD-R/RW Disc  
Finalise A Disc (DVD Deck Only)  
1 Perform steps 1 to 4 of AFormat A DVD-RAM DiscB (A pg. 78)  
before continuing.  
2 Press selection keys to select AFINALISEB, then press  
ENTER.  
Finalising DVD-R/RW discs recorded on this unit makes it possible  
for the discs to be played back on other DVD players. DVD-RW  
discs are finalised in the mode that the discs were formatted,  
enabling playback on compatible DVD players.  
Title names input in the Library Database Navigation are  
registered as title names in the DVD menu. (A pg. 52)  
For DVD-R/RW (Video mode) discs, the background selection  
screen will appear. Press selection keys to select the desired  
background from a selection of 18 backgrounds, then press  
ENTER.  
3 Press selection keys to select AOKB, then press ENTER.  
4 Upon completing finalisation, ACOMPLETEDB appears on the  
TV screen. Press ENTER to end.  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
Load a DVD-R/RW disc to finalise.  
5 Press SET UP to return to the normal screen.  
Menu screen is cleared.  
Once a DVD-R/RW (Video mode) disc has been finalised, the  
displays for original and play list do not appear. Only display for  
library appears.  
CABLE/SAT  
played on DVD players compatible with VR mode.  
TV  
DVD  
Cancel The Finalisation Of A DVD-RW Disc  
1 Load a DVD-RW disc to cancel the disc finalisation, and  
perform steps 1 to 4 of AFormat A DVD-RAM DiscB (A pg. 78)  
before continuing.  
2 Press selection keys to select ACANC. FINALIS.B, then press  
ENTER.  
ENTER  
Selection Keys  
FGDE  
3 Press selection keys to select AEXECUTEB, then press  
ENTER.  
4 Upon completing cancellation of finalisation, ACANCELLATION  
COMPLETEDB appears on the TV screen. Press ENTER to  
end.  
5 Press SET UP to return to the normal screen.  
When the disc finalisation is cancelled, the mode in which the  
disc was formatted is restored, making the disc recordable.  
(A pg. 8, 78)  
SET UP  
Before finalising  
It is possible to record on a blank space.  
It is possible to enter title names. (A pg. 52)  
It is possible to delete titles. (A pg. 53)  
It is impossible to overwrite recorded areas of DVD-R discs.  
Available recording capacity does not increase even if a recorded  
title is deleted from a DVD-R disc.  
It is impossible to record or edit DVD-R/RW discs recorded on  
other devices even if they have not been finalised.  
After finalising (For DVD-R/RW (Video mode) discs)  
Video and audio that have been recorded by then are recorded in  
conformity to the DVD Video standard, enabling you to play back  
the discs as DVD VIDEO discs.  
Although DVD-R/RW discs finalised on this unit become playable  
on DVD players compatible with DVD-R/RW discs, some discs  
still may not play, for which JVC cannot take responsibility.  
Marked points marked before finalising will be deleted, and titles  
will be divided automatically into AchaptersB approximately every  
5 minutes. (A pg. 27)  
Depending on the DVD players and DVD-R/RW discs used, and  
on the conditions of recording, it may not be possible to play back  
the discs. In this case, play back the discs on this unit.  
Additional recordings become impossible.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
SUBSIDIARY SETTINGS  
EN  
80  
Scan Mode Set (HDD & DVD Deck Only)  
Tray Lock (DVD Deck Only)  
If you connect the unit and TV with Component Video Connection  
(A pg. 18), you can select the scan mode from two modes:  
Interlaced scan mode which is used in the conventional TV  
system, and Progressive scan mode which enables reproduction of  
higher-quality images.  
You can lock the disc tray to prohibit the unwanted disc ejection by  
children.  
Turn off the unit.  
8 Interlaced scan  
M
o
In the conventional video system, a picture is shown on the display  
monitor in two halves. The Interlaced scan system places lines of  
the second half of the picture in-between lines of the first half of the  
picture.  
8 Progressive scan  
Progressive scan displays all the horizontal lines of a picture at one  
time, as a single frame. This system can convert the interlaced  
video from DVD into progressive format for connection to a  
progressive display. It dramatically increases the vertical  
resolution.  
To lock tray  
While the unit is turned off, press and hold o, then press M on the  
unit. ALOCKB appears on the front display panel and the disc tray is  
locked.  
To unlock tray  
ATTENTION:  
Your TV needs to be compatible with PAL Progressive.  
While the unit is turned off, press and hold o, then press M on the  
unit. AUNLOCKB appears on the front display panel.  
Turn on the unit.  
Turn on the TV and select the AV mode.  
Slide the TV/CABLE/SAT/DVD switch to DVD.  
CABLE/SAT  
TV  
DVD  
HDD  
DVD  
PROGRESSIVE SCAN  
1 Press HDD or DVD so that the HDD or DVD lamp lights up on  
the unit.  
2 Press PROGRESSIVE SCAN for 3 or more seconds.  
Video output indicator (q) lights on the front display panel if  
Progressive scan mode has been established. (A pg. 13)  
Each press of PROGRESSIVE SCAN for 3 or more seconds  
switches the scan mode.  
NOTES:  
When the progressive mode is set, be sure to set AL-1 OUTPUTB  
to ACOMPONENTB (A pg. 64). Progressive scan is output only  
from [COMPONENT VIDEO OUT] connector.  
Interlaced scan mode is the setting at your purchase.  
Interlaced scan mode might be suitable depending on video  
material.  
Scan mode cannot be set while menu screen is displayed.  
When the Progressive scan mode is engaged, no video signal is  
output from [L-1 IN/OUT] connector.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
TROUBLESHOOTING  
EN  
81  
Before requesting service for a problem, use this chart and see if  
you can solve the trouble yourself. Small problems are often easily  
solved, and this can save you the trouble of sending your unit off  
for repair.  
Playback (DVD Deck)  
The DVD deck cannot be operated.  
The DVD deck is not selected.  
] Press DV/HDD/DVD SELECT on the unit repeatedly or DVD on  
Initialising (DVD Deck Only)  
the remote control so that the DVD lamp lights up on the unit.  
Malfunction occurs on the unit.  
Images do not appear on the TV screen.  
] Press A to turn off the unit, press and hold A, then press o  
The TV receiver’s channel selector is not set to the AV mode.  
for two seconds or more.  
] Set the TV to its AV mode.  
When interlace scanned programme is played back,  
progressive scan mode is selected.  
General  
No power is supplied to the unit.  
] Press and hold PROGRESSIVE SCAN until q disappears  
from the front display panel. (A pg. 80)  
The AC power plug is disconnected from the mains outlet.  
] Connect the AC power plug to the mains outlet securely.  
Playback does not start or stop immediately after playback is  
started by pressing I.  
(A pg. 18)  
On the front display panel, ANO DISCB appears.  
The remote control does not work properly.  
The disc is loaded upside down.  
] Remove the batteries, wait for 5 minutes or more, then load the  
] Place the disc on the disc tray with the playback surface facing  
butteries again.  
down. (A pg. 9)  
The setting of the remote control code is inappropriate.  
A disc not being compatible with the unit is loaded.  
] Load a playable disc on the unit. (A pg. 6)  
A dirty disc is loaded.  
] Clean the disc. (A pg. 10)  
Defective disc is loaded.  
] Set the same remote control code (1, 2, 3, or 4) on both the unit  
and the remote control. (A pg. 68)  
The batteries are discharged.  
] Replace the dead batteries with new ones.  
] Replace the warped or scratched disc with a normal one.  
Dubbing from the external equipment is not possible.  
Images are blurred or distorted when you start High-Speed  
Search.  
The source (another video recorder, camcorder) has not been  
properly connected.  
All necessary power switches have not been turned on.  
] Confirm that all units’ power switches are turned on.  
The setting of the input channel position is inappropriate.  
] Images are blurred or distorted at the point where the playback  
speed changes and this is not a malfunction of the unit.  
Playback does not start.  
] Select the input channel position (AF-1B, AL-1B or AL-2B) that  
corresponds to the input terminal connected to the external  
equipment. (A pg. 63)  
] Playback does not start for approximately 30 seconds after  
Playback does not start when you select a title or a chapter.  
The on-screen display superimposed on the programme  
played back/received on this unit is recorded when you dub  
the programme to an external recording equipment.  
The Parental Lock is engaged and the disc is rated higher than  
the set level.  
] Release the Parental Lock temporarily or change the set level.  
] Set ASUPERIMPOSEB to AOFFB. (A pg. 73)  
(A pg. 33)  
The unit does not operate.  
Playback (HDD Deck)  
The HDD deck cannot be operated.  
There are cases when the operation is prohibited on the disc.  
Lightning or static electricity may cause malfunction of the unit.  
] Press A to turn the power off, then press the button again to  
The HDD deck is not selected.  
turn the power on.  
] Press DV/HDD/DVD SELECT on the unit repeatedly or HDD on  
the remote so that the HDD lamp lights up on the unit.  
The remote control of a JVC TV will not operate the unit.  
The setting of the remote control code is inappropriate.  
] To operate the unit using a JVC TV remote control, set the  
remote control code of the unit to A1B (Default: A3B). (A pg. 68)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TROUBLESHOOTING  
EN  
82  
Playback (DV Deck)  
Recording (HDD Deck)  
The DV deck cannot be operated.  
TV broadcasts cannot be recorded.  
The DV deck is not selected.  
AL-1B, AL-2B or AF-1B has been selected as the input mode.  
] Press DV/HDD/DVD SELECT on the unit repeatedly or DV on  
] Set to the desired channel.  
the remote control so that the DV lamp lights up on the unit.  
Camcorder recording is not possible.  
The tape will not rewind or fast-forward.  
The camcorder has not been properly connected.  
] Confirm that the camcorder is properly connected.  
The input mode is not correct.  
The tape is already fully rewound or fast-forwarded.  
] Check the cassette.  
] Set the input mode to AF-1B. (A pg. 62)  
The playback picture does not appear while the tape is  
running.  
Recording (DV Deck)  
The TV is not set to the AV mode.  
During recording, the tape does not run. The DV recording  
lamp lights up on the unit.  
] Set the TV to the AV mode.  
Noise appears during visual search.  
The unit is in the Record Pause mode.  
This is normal.  
] Press I to resume recording.  
Recording cannot be done.  
The playback picture is blurred or interrupted while TV  
broadcasts are clear or AUSE CLEANING CASSETTEB  
message appears on the screen.  
There is no cassette loaded, or the cassette loaded has had its  
erase protection switch set to ASAVEB.  
] Insert a Mini DV cassette, or set the erase protection switch set  
The video heads may be dirty.  
to ARECB.  
] Use a dry cleaning cassette M-DV12CL, or consult your JVC  
An attempt has been made to record from this unit’s built-in  
tuner.  
dealer.  
] It is not possible to record from this unit’s built-in tuner to the DV  
deck. Record to the HDD or a DVD disc.  
If you want to record on a DV tape, record by connecting the  
output of the external equipment such as a satellite receiver to  
this unit’s external input ([L-2 IN/DECODER], etc.).  
The desired programme cannot be recorded.  
The channel position does not correspond to that in the  
receiving area.  
] Set the correct channel position for the receiving broadcast.  
Camcorder recording is not possible.  
(A pg. 74)  
The camcorder has not been properly connected.  
] Confirm that the camcorder is properly connected.  
The input mode is not correct.  
Recording cannot be made.  
No disc or a disc not being compatible with the unit is loaded.  
] Load a recordable disc on the unit. (A pg. 6)  
The disc loaded is not formatted.  
] Format the disc. (A pg. 78)  
] Set the input mode to AF-1B or ADVB.  
The tape is automatically rewound, then the unit is shut off.  
The end of the tape was reached during recording.  
] The programme may not have been recorded in its entirety.  
Next time make sure you have enough time on the tape to  
record the entire programme.  
] Recording cannot be made on finalised discs. Load a  
recordable disc on the unit.  
The disc is full or does not have enough space for the title to be  
recorded.  
Audio dubbing is not possible.  
] Clear unnecessary titles on the disc or load a blank disc.  
(A pg. 53)  
ADV AUDIO RECB had been set to A16BITB at the original  
recording.  
The DVD-RAM disc loaded has had its protect tab slid to the  
protect position.  
] Set ADV AUDIO RECB to A12BITB at the original recording.  
] Release the protect tab. (A pg. 9)  
The tape speed had been set to LP at the original recording.  
] Set the tape speed to SP at the original recording.  
Monitoring the audio dubbed sound is not possible during  
audio dubbing.  
] This is normal. Monitor the sound using the connected devices.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
EN  
83  
Timer Recording (HDD & DVD Deck)  
Other Problems  
Timer programming cannot be made.  
The image of the TV broadcast appears distorted on the TV  
screen.  
Date and time is not correct.  
] Set date and time correctly. (A pg. 77)  
Timer recording is in progress.  
For basic connection  
] Press PROGRESSIVE SCAN for 3 or more seconds so that the  
Video output indicator (q) lights off on the front display panel.  
] Timer programming can’t be performed while a timer recording  
is in progress. Wait until it finishes.  
For component video connection  
] Press PROGRESSIVE SCAN for 3 or more seconds so that the  
Video output indicator (q) lights up on the front display panel.  
Timer programming recording does not start.  
Date and time is not correct.  
] Set date and time correctly. (A pg. 77)  
Whistling or howling is heard from the TV during camcorder  
recording.  
VIDEO Plus+ Timer Programming cannot be made.  
The camcorder’s microphone is too close to the TV.  
] Position the camcorder so its microphone is away from the TV.  
The TV’s volume is too high.  
Date and time set on the unit is not correct.  
] Set date and time correctly. (A pg. 77)  
The channel position does not correspond to that in the  
receiving area.  
] Turn the TV’s volume down.  
] Set the correct channel position for the receiving broadcast.  
When scanning channels, some of them are skipped over.  
(A pg. 74)  
Those channels have been designated to be skipped.  
The VIDEO Plus+ system does not timer record properly.  
] If you need the skipped channels, restore them. (A pg. 75)  
The unit’s channel positions have been set incorrectly.  
The channel cannot be changed.  
] Refer to AVIDEO Plus+ System SetupB (A pg. 74) and  
reperform the procedure.  
Recording or RetroActive Recording* is in progress.  
] Press W to pause recording, change the channel, then press I  
Automatic Satellite Programme Recording does not start.  
to resume recording.  
* HDD deck only  
The satellite receiver is not connected properly to this unit.  
] Connect the satellite receiver to the [L-2 IN/DECODER]  
Channel settings that were made manually seem to have  
changed or disappeared.  
connector properly. (A pg. 50)  
On the front display panel, A– –:– –B appears.  
After the manual settings were made, Auto Channel Set was  
performed.  
Power failure occurred.  
] Perform AClock SetB (A pg. 77).  
] Set date and time correctly. (A pg. 77)  
Malfunction occurs and the unit cannot be power off.  
APROGRAMME FULLB appears on the TV screen during timer  
programming.  
] Reset the unit by disconnecting the AC power plug from the AC  
outlet and connect again.  
16 programmes have already been timer programmed.  
] Clear unnecessary programmes on the unit, then try timer  
programming again. (A pg. 49)  
The disc space does not increase when recorded titles are  
cleared.  
The PC’s data recorded on a DVD-RAM drive cannot be cleared  
on this unit.  
] Format the disc. (When the disc is soiled, wipe the disc with a  
soft dry cloth before formatting.) (A pg. 10, 78)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
EN  
84  
UNREADABLE DISC  
CHECK DISC  
DISC NOT REGISTERED IN THE LIBRARY  
REGISTER DISC?  
When an incompatible disc is loaded, I has been pressed.  
(A pg. 7)  
A disc that is not registered in the library has been inserted.  
Register the disc as necessary. (A pg. 56)  
COULD NOT FORMAT THE DISC  
CHECK THE DISC  
INSERT DISC XXXX  
Formatting is not complete since the disc may be dirty or  
damaged. Take out the disc, clean it and retry. (A pg. 10, 78)  
Appears when a title that has been selected in the library is not  
contained in the loaded disc.  
CAN NOT FINALISE THIS DISC  
CAN NOT RECORD OR MAKE PLAY LIST  
DELETE UNWANTED TITLES  
Finalising is not complete since the disc may be dirty or  
damaged. Take out the disc, clean it and retry. (A pg. 10, 79)  
Recording and/or editing cannot be performed.  
The number of titles exceeds 99.  
CAN NOT CANCEL FINALISATION OF THIS DISC  
The number of play lists exceeds 99.  
Cancelling disc finalisation is not complete since the disc may be  
dirty or damaged. Take out the disc, clean it and retry. (A pg. 10,  
79)  
SET CLOCK BEFORE TIMER PROGRAMMING  
To set the timer programme, the clock must be set in advance.  
(A pg. 77)  
PRESS [STOP] AGAIN TO STOP RECORDING  
During Live Memory playback, o has been pressed. (A pg. 44)  
PROGRAMME FULL  
DELETE UNWANTED TIMER PROGRAMMES  
TIMER RECORDING COMPLETED  
You can programme this unit to timer record as many as 16  
programmes. To programme more, you need to cancel a timer  
programme already set. (A pg. 49)  
Timer recording has finished during Live Memory playback.  
PLAYBACK WILL STOP  
THEN TIMER RECORDING WILL START  
DISC NOT LOADED  
Timer recording finished during Live Memory playback, then the  
Operation has been attempted when a disc is not loaded, or  
loaded upside down. (A pg. 9)  
next timer recording is about to begin while playback continues.  
COPY PROHIBITED  
CAN NOT RECORD  
DISC NOT RECORDABLE  
INSERT RECORDABLE DISC  
An attempt has been made to record copy-protected contents.  
An attempt has been made to record copy-once contents on a  
disc that is not CPRM compatible, such as DVD-R.  
When a playback-only disc or a finalised disc is loaded, R has  
been pressed. (A pg. 6)  
PLUSCODE NO. ERROR  
CONFIRM PLUSCODE NO. THEN RETRY  
COPY PROHIBITED  
CAN NOT PLAY  
An invalid PlusCode number has been input. (A pg. 46)  
The unit has detected invalid contents at the start or in the middle  
of playback.  
GUIDE PROGRAM IS NOT SET  
SET GUIDE PROGRAM THEN RETRY  
THE i.LINK DEVICE THAT YOU HAVE CONNECTED IS NOT  
RECOGNIZED  
MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY  
AND POWERED ON  
To set the timer programme using the VIDEO Plus+ system, the  
Guide Programme Number must be set in advance. (A pg. 74)  
CAN NOT SET VIDEO PLUS+ TIMER PROGRAMMING  
DURING TIMER RECORDING OR INSTANT TIMER  
RECORDING  
An attempt has been made to start DV dubbing when a digital  
video camera is not properly connected to the unit.  
Check the connection. (A pg. 61)  
Appears when you tried to input a PlusCode number during timer  
recording or instant timer recording.  
REGION CODE ERROR  
CHECK DISC  
A disc loaded cannot be played back on this unit since the region  
number of the disc does not match that of the unit. (A pg. 7)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
EN  
85  
Language Code List  
AA  
AB  
AF  
AM  
AR  
AS  
AY  
AZ  
BA  
BE  
BG  
BH  
BI  
Afar  
IK  
Inupiak  
RN  
RO  
RU  
RW  
SA  
SD  
SG  
SH  
SI  
Kirundi  
Abkhazian  
Afrikaans  
Ameharic  
Arabic  
IN  
Indonesian  
Icelandic  
Hebrew  
Rumanian  
Russian  
Kinyarwanda  
Sanskrit  
Sindhi  
IS  
IW  
JI  
Yiddish  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
JW  
KA  
KK  
KL  
KM  
KN  
KO  
KS  
KU  
KY  
LA  
LN  
LO  
LT  
Javanese  
Georgian  
Kazakh  
Sangho  
Serbo-Croatian  
Singhalese  
Slovak  
Greenlandic  
Cambodian  
Kannada  
Korean (KOR)  
Kashmiri  
Kurdish  
Byelorussian  
Bulgarian  
Bihari  
SK  
SL  
Slovenian  
Samoan  
Shona  
SM  
SN  
SO  
SQ  
SR  
SS  
ST  
SU  
SW  
TA  
Bislama  
Bengali, Bangla  
Tibetan  
BN  
BO  
BR  
CA  
CO  
CS  
CY  
DZ  
EL  
EO  
ET  
EU  
FA  
Somali  
Albanian  
Serbian  
Siswati  
Sesotho  
Sundanese  
Swahili  
Tamil  
Kirghiz  
Breton  
Latin  
Catalan  
Corsican  
Czech  
Lingala  
Laothian  
Lithuanian  
Latvian, Lettish  
Malagasy  
Maori  
Welsh  
LV  
Bhutani  
Greek  
MG  
MI  
TE  
TG  
TH  
TI  
Telugu  
Esperanto  
Estonian  
Basque  
Persian  
MK  
ML  
MN  
MO  
MR  
MS  
MT  
MY  
NA  
NE  
OC  
OM  
OR  
PA  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
Tajik  
Thai  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tonga  
TK  
TL  
FJ  
Fiji  
FO  
FY  
GA  
GD  
GL  
GN  
GU  
HA  
HI  
Faroese  
Frisian  
Malay (MAY)  
Maltese  
TN  
TO  
TR  
TS  
TT  
Irish  
Burmese  
Nauru  
Turkish  
Tsonga  
Tatar  
Scots Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
Nepali  
Occitan  
TW  
UK  
UR  
UZ  
VI  
Twi  
(Afan) Oromo  
Oriya  
Ukrainian  
Urdu  
Hindi  
Panjabi  
Uzbek  
HR  
HU  
HY  
IA  
Croatian  
Hungarian  
Armenian  
Interlingua  
Interlingue  
PL  
PS  
PT  
QU  
RM  
Polish  
Vietnamese  
Volapuk  
Wolof  
Pashto, Pushto  
Portuguese  
Quechua  
Rhaeto-Romance  
VO  
WO  
XH  
YO  
ZU  
Xhosa  
IE  
Yoruba  
Zulu  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
APPENDIX  
EN  
86  
Country/Area Code List for Parental Lock  
AD  
AE  
AF  
AG  
AI  
Andorra  
CK  
Cook Islands  
Chile  
GN  
GP  
GQ  
GR  
GS  
Guinea  
United Arab Emirates  
Afghanistan  
CL  
Guadeloupe  
Equatorial Guinea  
Greece  
CM  
CN  
CO  
Cameroon  
China  
Antigua and Barbuda  
Anguilla  
Colombia  
South Georgia and the South  
Sandwich Islands  
AL  
Albania  
CR  
CU  
CV  
CX  
CY  
CZ  
Costa Rica  
Cuba  
GT  
GU  
GW  
GY  
HK  
HM  
Guatemala  
Guam  
AM  
AN  
AO  
AQ  
AR  
Armenia  
Netherlands Antilles  
Angola  
Cape Verde  
Christmas Island  
Cyprus  
Guinea-Bissau  
Guyana  
Antarctica  
Argentina  
Hong Kong  
Czech Republic  
Heard Island and McDonald  
Islands  
AS  
AT  
American Samoa  
Austria  
DE  
DJ  
DK  
DM  
DO  
DZ  
EC  
EE  
EG  
EH  
ER  
ES  
ET  
FI  
Germany  
Djibouti  
HN  
HR  
HT  
HU  
ID  
Honduras  
Croatia  
AU  
AW  
AZ  
BA  
BB  
BD  
BE  
BF  
BG  
BH  
BI  
Australia  
Denmark  
Dominica  
Dominican Republic  
Algeria  
Haiti  
Aruba  
Hungary  
Azerbaijan  
Bosnia and Herzegovina  
Barbados  
Indonesia  
IE  
Ireland  
Ecuador  
IL  
Israel  
Bangladesh  
Belgium  
Estonia  
IN  
India  
Egypt  
IO  
IQ  
IR  
British Indian Ocean Territory  
Burkina Faso  
Bulgaria  
Western Sahara  
Eritrea  
Iraq  
Iran (Islamic Republic of)  
Bahrain  
Spain  
IS  
Iceland  
Italy  
Burundi  
Ethiopia  
IT  
BJ  
Benin  
Finland  
JM  
JO  
JP  
KE  
Jamaica  
Jordan  
Japan  
Kenya  
BM  
BN  
BO  
Bermuda  
FJ  
Fiji  
Brunei Darussalam  
Bolivia  
FK  
FM  
Falkland Islands (Malvinas)  
Micronesia  
(Federated States of)  
BR  
BS  
BT  
BV  
BW  
BY  
Brazil  
FO  
FR  
FX  
GA  
GB  
GD  
Faroe Islands  
France  
KG  
KH  
KI  
Kyrgyzstan  
Cambodia  
Bahamas  
Bhutan  
France, Metropolitan  
Gabon  
Kiribati  
Bouvet Island  
Botswana  
Belarus  
KM  
KN  
KP  
Comoros  
United Kingdom  
Grenada  
Saint Kitts and Nevis  
Korea, Democratic People’s  
Republic of  
BZ  
CA  
CC  
CF  
CG  
Belize  
GE  
GF  
GH  
GI  
Georgia  
KR  
KW  
KY  
KZ  
LA  
Korea, Republic of  
Kuwait  
Canada  
French Guiana  
Ghana  
Cocos (Keeling) Islands  
Central African Republic  
Congo  
Cayman Islands  
Kazakhstan  
Gibraltar  
GL  
Greenland  
Lao People’s Democratic  
Republic  
CH  
CI  
Switzerland  
Côte d’Ivoire  
GM  
Gambia  
LB  
Lebanon  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
APPENDIX  
EN  
87  
LC  
LI  
Saint Lucia  
Liechtenstein  
Sri Lanka  
NU  
NZ  
OM  
PA  
Niue  
SZ  
TC  
TD  
TF  
TG  
TH  
TJ  
Swaziland  
New Zealand  
Oman  
Turks and Caicos Islands  
Chad  
LK  
LR  
LS  
Liberia  
Panama  
French Southern Territories  
Togo  
Lesotho  
PE  
PF  
PG  
PH  
PK  
PL  
Peru  
LT  
Lithuania  
French Polynesia  
Papua New Guinea  
Philippines  
Pakistan  
Thailand  
LU  
LV  
Luxembourg  
Latvia  
Tajikistan  
TK  
TM  
TN  
TO  
TP  
TR  
TT  
TV  
TW  
TZ  
UA  
UG  
UM  
Tokelau  
LY  
Libyan Arab Jamahiriya  
Morocco  
Turkmenistan  
Tunisia  
MA  
MC  
MD  
MG  
MH  
ML  
MM  
MN  
MO  
MP  
MQ  
Poland  
Monaco  
PM  
PN  
PR  
PT  
PW  
PY  
QA  
RE  
RO  
RU  
Saint Pierre and Miquelon  
Pitcairn  
Tonga  
Moldova, Republic of  
Madagascar  
Marshall Islands  
Mali  
East Timor  
Turkey  
Puerto Rico  
Portugal  
Trinidad and Tobago  
Tuvalu  
Palau  
Myanmar  
Paraguay  
Taiwan  
Mongolia  
Qatar  
Tanzania, United Republic of  
Ukraine  
Macau  
Réunion  
Northern Mariana Islands  
Martinique  
Romania  
Uganda  
Russian Federation  
United States Minor Outlying  
Islands  
MR  
MS  
MT  
MU  
MV  
Mauritania  
Montserrat  
Malta  
RW  
SA  
SB  
SC  
SD  
Rwanda  
US  
UY  
UZ  
VA  
VC  
United States  
Saudi Arabia  
Solomon Islands  
Seychelles  
Sudan  
Uruguay  
Uzbekistan  
Mauritius  
Maldives  
Vatican City State (Holy See)  
Saint Vincent and the  
Grenadines  
MW  
MX  
MY  
MZ  
NA  
NC  
NE  
NF  
NG  
NI  
Malawi  
SE  
SG  
SH  
SI  
Sweden  
VE  
VG  
VI  
Venezuela  
Mexico  
Singapore  
Virgin Islands (British)  
Virgin Islands (U.S.)  
Viet Nam  
Malaysia  
Mozambique  
Namibia  
Saint Helena  
Slovenia  
VN  
VU  
WF  
WS  
YE  
YT  
YU  
ZA  
ZM  
ZR  
ZW  
SJ  
Svalbard and Jan Mayen  
Slovakia  
Vanuatu  
New Caledonia  
Niger  
SK  
SL  
SM  
SN  
SO  
SR  
ST  
SV  
SY  
Wallis and Futuna Islands  
Samoa  
Sierra Leone  
San Marino  
Norfolk Island  
Nigeria  
Yemen  
Senegal  
Mayotte  
Nicaragua  
Netherlands  
Norway  
Somalia  
Yugoslavia  
South Africa  
Zambia  
NL  
Suriname  
NO  
NP  
NR  
Sao Tome and Principe  
El Salvador  
Nepal  
Zaire  
Nauru  
Syrian Arab Republic  
Zimbabwe  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
EN  
88  
TV Station And ID List  
The AIDB abbreviation is what is shown on-screen in lieu of the station name. The AIDB abbreviation is listed in the Confirmation screen and  
is displayed on the TV screen when the unit is tuned to a different station.  
STATION NAME  
ID  
STATION NAME  
ID  
ANGL  
ARD  
RB1  
RB3  
RB1  
RB3  
Anglia TV  
ARD  
ARTE  
BBC  
Rikisutvarpid-S  
RTBF 1  
RTBF 2  
RTE 1  
RTL  
RTL 2  
RTP  
SAT  
SAT 1  
Scottish TV  
SC4  
SDR  
SDR1  
SFB1  
SFB3  
SKY  
Sky One  
Sky Net  
Sport  
RKPS  
RTB1  
RTB2  
RTE1  
RTL  
RTL2  
RTP  
SAT  
ARTE  
BBC Group  
BBC1  
BBC2  
BBCW  
Berlin 1  
Berlin 2  
Border TV  
Bayern1  
Bayern3  
BRT1  
BBC1  
BBC2  
BBCW  
BLN1  
BLN2  
BORD  
BR1  
SAT1  
SCOT  
SC4  
BR3  
BRT1  
BRT2  
CHLD  
CH+  
SDR  
BRT2  
SDR1  
SFB1  
SFB3  
SKY  
SKY1  
SKYN  
SPRT  
SR1  
SRTL  
STVT  
STV1  
STV2  
SWR  
SWF1  
SWZ4  
TEES  
TEXT  
TF1  
Children Ch  
Canal +  
CNN  
Channel TV  
Central TV  
Channel 4  
Channel 5  
DISC  
CNN  
CHNL  
CNTR  
CH 4  
CH 5  
DISC  
DRS  
DRTV  
DSF  
EURN  
EURO  
EURS  
FR1  
FR2  
FR3  
GRNA  
GRMP  
HR1  
SR 1  
Super RTL  
STV Test  
STV 1  
STV 2  
Suedwest3  
SWF 1  
Schweiz4  
TYNE TEES  
Text  
DRS  
DR TV  
DSF  
Euronews  
Euronews  
Eurosports  
France1  
France2  
France3  
Granada TV  
Grampian TV  
Hessen1  
Hessen3  
HRT  
TF1  
TNT int  
TRT int  
TSI  
TNT  
TRT  
TSI  
TSR  
HR3  
HRT  
TSR  
HTV  
ITV1  
KABL  
LNDN  
MDR  
MTV  
TSW  
TVE  
TV Polonia  
TVP 1  
TVP 2  
TVS  
TSW  
TVE  
TVPA  
TVP1  
TVP2  
TVS  
HTV  
ITV Network  
Kabelkanal  
London  
MDR  
MTV  
N3  
TV2  
TV2  
Nord3  
NDR1  
NDR3  
NED1  
NED2  
NED3  
NET2  
NRK  
TV5  
TV5  
NDR1  
NDR3  
NED1  
NED2  
NED3  
Network 2  
NRK  
Tele Zurich  
Ulster TV  
Veronica  
VIVA  
VIVA2  
VOX  
TZUR  
ULST  
VERN  
VIVA  
VIV2  
VOX  
N-TV  
OKAN  
ORF1  
ORF2  
ORF3  
OWL3  
PRMI  
PR07  
RAI1  
RAI2  
RAI3  
VTM  
VT4  
VTM  
VT4  
N-TV  
Offener Kanal  
ORF1  
ORF2  
ORF3  
OWL 3  
Premiere  
PR07  
RAI1  
RAI2  
West1  
West3  
YLE 1  
YLE 2  
Yorkshire TV  
ZDF  
WDR1  
WDR3  
YLE1  
YLE2  
YORK  
ZDF  
Zurich 1  
3SAT  
ZUR1  
3SAT  
RAI3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
APPENDIX  
EN  
89  
TV Station Channel Number Guide  
Only the main stations are listed. There are in addition many relay stations, and full lists are available from the BBC and ITV.  
BBC1 BBC2 ITV CH4 CH5 BBC1 BBC2 ITV CH4 CH5  
London & South-East  
North-West  
Caldbeck ........................... 30  
Winter Hill.......................... 55  
Bluebell Hill........................40  
Crystal Palace....................26  
Dover .................................50  
Heathfield...........................49  
Oxford................................57  
46  
33  
56  
52  
63  
43  
23  
66  
64  
60  
65  
30  
53  
67  
53  
^
37  
^
^
49  
34  
62  
28  
59  
32  
65  
56  
48  
North-East  
Bilsdale West Moor ........... 33  
Chatton.............................. 39  
Pontop Pike ....................... 58  
26  
45  
64  
29  
49  
61  
23  
42  
54  
35  
^
68  
South-West  
Beacon Hill.........................57  
Caradon Hill.......................22  
Huntshaw Cross ................55  
Redruth..............................51  
Stockland Hill.....................33  
Channel Islands  
63  
28  
62  
44  
26  
60  
25  
59  
41  
23  
53  
32  
65  
47  
29  
^
^
67  
37  
^
Scotland  
Angus................................ 57  
Black Hill............................ 40  
Sandale............................. 22  
Caldbeck ........................... ^  
Creigkelly........................... 31  
Darvel................................ 33  
Durris................................. 22  
Eitshal ............................... 33  
Keelylang Hill..................... 40  
Knock More ....................... 33  
Rosemarkie....................... 39  
Rumster Forest.................. 31  
Selkirk ............................... 55  
63  
46  
^
34  
27  
26  
28  
26  
46  
26  
45  
27  
62  
60  
43  
^
28  
24  
23  
25  
23  
43  
23  
49  
24  
59  
53  
50  
^
32  
21  
29  
32  
29  
50  
29  
42  
21  
65  
^
37  
^
56  
48  
35  
67  
^
^
^
67  
^
52  
Fremont Point ....................51  
44  
41  
47  
^
South  
Hannington ........................39  
Midhurst.............................61  
Rowridge............................31  
45  
55  
24  
42  
58  
27  
66  
68  
21  
35  
^
^
West  
Mendip...............................58  
64  
61  
54  
37  
Wales  
East  
Blaenplwyf......................... 31  
Carmel............................... 57  
Llanddona ......................... 57  
Moel-y-Parc....................... 52  
Presely .............................. 46  
Wenvoe ............................. 44  
27  
63  
63  
45  
40  
51  
24  
60  
60  
49  
43  
41  
21  
53  
53  
42  
50  
47  
56  
^
^
^
37  
^
Sandy Heath......................31  
Sudbury .............................51  
Tacolneston........................62  
27  
44  
55  
24  
41  
59  
21  
47  
65  
39  
35  
52  
Midlands  
Ridge Hill ...........................22  
Sutton Coldfield .................46  
The Wrekin ........................26  
Waltham.............................58  
28  
40  
33  
64  
25  
43  
23  
61  
32  
50  
29  
54  
35  
37  
35  
35  
Northern Ireland  
Brougher Mountain............ 22  
Divis .................................. 31  
Limavady........................... 55  
28  
27  
62  
25  
24  
59  
32  
21  
65  
^
37  
^
North  
Belmont..............................22  
Emley Moor........................44  
28  
51  
25  
47  
32  
41  
56  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
EN  
90  
GENERAL  
VIDEO/AUDIO (HDD Deck)  
Power requirement  
AC 220 V - 240 VH, 50 Hz/60 Hz  
Video recording compression system  
MPEG2 (VBR)  
Power consumption  
Power on: 45 W  
Power off: 15 W  
Audio recording system  
Dolby Digital (2 ch)  
Linear PCM (XP mode only)  
Temperature  
Operating: 5°C to 35°C  
Storage: –20°C to 60°C  
Recording time  
Maximum 473 hours (with 250 GB HDD)  
(XP): Approx. 53 hours  
(SP): Approx. 109 hours  
(LP): Approx. 218 hours  
(EP): Approx. 328 hours  
(FR): Approx. 473 hours  
Operating position  
Horizontal only  
Dimensions (WxHxD)  
435 mm x 96 mm x 383 mm  
Weight  
6.5 kg  
VIDEO/AUDIO (DV Deck)  
Signal system  
Input/Output  
PAL colour signal, 625 lines/50 fields  
Video input: 0.5 - 2.0 Vp-p, 75 K (pin jack)  
Audio input:  
Recording system  
Digital Component Recording  
–8 dB, 50 kK (pin jack)  
Corresponding to mono (left)  
Audio output: –8 dB, 1 kK (pin jack)  
21-pin SCART connectors:  
IN/OUT x 1, IN/DECODER x 1  
S-video input:  
Format  
DV format (SD mode)  
Cassette  
Mini DV Cassette  
Y: 0.8 - 1.2 Vp-p, 75 K  
C: 0.2 - 0.4 Vp-p, 75 K  
S-video output:  
Maximum recording time  
(SP): 80 min. with M-DV80ME cassette  
(LP): 120 min. with M-DV80ME cassette  
Y: 1.0 Vp-p, 75 K  
C: 0.3 Vp-p, 75 K  
Audio recording system  
PCM 48 kHz, 16 bit (2 ch)/  
32 kHz, 12 bit (4 ch)  
DV: 4-pin for DV IN/OUT  
Component video output:  
Y: 1.0 Vp-p, 75 K  
CB/CR, PB/PR: 0.7 Vp-p, 75 K  
Corresponding to copy protection  
Digital audio output:  
Specifications shown are for SP mode unless otherwise specified.  
TUNER/TIMER  
Optical, Coaxial  
Corresponding to Dolby Digital and DTS Digital Surround  
Bit stream  
Selectable in digital audio output setting menu  
Tuning system  
Frequency synthesised tuner  
Channel coverage  
VHF: 44.5 MHz - 143 MHz/  
143 MHz - 470 MHz  
UHF: 470 MHz - 862 MHz  
VIDEO/AUDIO (DVD Deck)  
Recording time  
Maximum 8 hours (with 4.7 GB disc)  
(XP): Approx. 1 hour  
Memory backup time  
Approx. 60 minutes  
(SP): Approx. 2 hours  
(LP): Approx. 4 hours  
(EP): Approx. 6 hours  
ACCESSORIES  
Provided accessories  
RF cable,  
21-pin SCART cable,  
Infrared remote control unit,  
AAAB battery x 2  
(FR): Approx. 1 hour - 8 hours  
Audio recording system  
Dolby Digital (2 ch)  
Linear PCM (XP mode only)  
Video recording compression system  
MPEG2 (CBR/VBR)  
E.& O.E. Design and specifications subject to change without  
notice.  
ATTENTION:  
This unit contains microcomputers. External electronic noise or  
interference could cause malfunctioning. In such cases, switch  
the unit off and unplug the mains power cord. Then plug it in  
again and turn the unit on. Take out the disc. After checking the  
disc, operate the unit as usual.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
LIST OF TERMS  
EN  
91  
A
P
A-B Repeat Playback ................................................ 30  
Accidental erasure prevention .................................... 41  
Adjusting The Picture Quality ..................................... 31  
Angle Selection ........................................................ 27  
Audio Channel Selection ........................................... 28  
Audio Language/Sound Selection ............................... 28  
Auto Channel Set ..................................................... 74  
Pan&Scan ................................................................ 23  
Parental Lock ........................................................... 33  
Play List ................................................................... 54  
Playback Control (PBC) ............................................. 28  
Programme Playback ................................................ 32  
Progressive scan ...................................................... 80  
R
B
Random Playback ..................................................... 32  
Receiving Stereo And Bilingual Programmes ......... 36, 38  
Recordable/Playable Discs .......................................... 6  
Recording Medium And Format .................................... 8  
Recording Mode ................................................. 34, 37  
Region Number .......................................................... 7  
Register Disc ............................................................ 56  
Relief Recording ....................................................... 48  
Repeat Playback ...................................................... 29  
Resume Function ..................................................... 26  
Resuming Playback .................................................. 45  
RetroActive Recording .............................................. 45  
Basic Playback .............................................. 24, 39, 41  
Basic Recording ..................................................34, 37  
C
Cancel And Change Programmes .............................. 49  
Check Programmes .................................................. 49  
Country/Area Code List for Parental Lock .................... 86  
D
Disc menu ............................................................... 25  
Disc Remaining Time ...........................................35, 38  
Disc Resume ........................................................... 72  
Discs For Playback Only ............................................. 7  
DVD menu ............................................................... 25  
S
Select The Switching Interval Of The Slide Show ......... 32  
Selection Of The Audio Channel To Be  
E
Recorded On A Disc ............................................ 36  
Setting The Progressive Mode ................................... 32  
Simulated Surround Effect ......................................... 31  
Simultaneous Recording and Playback ....................... 45  
Skip Search ..................................................26, 39, 42  
Slow Motion ..................................................25, 39, 42  
Soundtrack Selection ................................................ 42  
Still Picture/Frame-By-Frame Playback ............25, 39, 42  
Subtitle Selection ...................................................... 28  
Elapsed Recording Time Indication .......................35, 38  
F
File Structure Of Discs ................................................ 8  
Free Rate Function ................................................... 36  
G
Guide Programme Number ........................................ 74  
I
Instant Timer Recording (ITR) ...............................35, 38  
Interlaced scan ......................................................... 80  
T
Temporary Recording ................................................ 45  
Time Code ............................................................... 42  
Time Search ............................................................ 31  
Top menu ................................................................ 25  
Tray Lock ................................................................. 80  
TV Station And ID List ............................................... 88  
J
Jump Search .......................................................26, 40  
Just Clock ................................................................ 77  
L
Language Code List .................................................. 85  
Letter Box ................................................................ 23  
Live Memory ............................................................ 45  
Unplayable Discs ........................................................ 7  
Usable cassettes ...................................................... 41  
M
V
Manual Channel Set ................................................. 75  
Marking Positions To Play Back Again Later ...........27, 40  
Menu/Audio/Subtitle Language Set ............................. 22  
Variable Speed Search ...................................25, 39, 42  
VPS/PDC Recording ................................................. 47  
W
N
Weekly/Daily Recording ............................................ 47  
Next Function Memory .............................................. 42  
O
One Touch Replay ................................... 26, 40, 42, 45  
On-screen Bar .......................................................... 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
EN  
Printed in China  
1105KTH-SW-BJ  
EK  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2005 Victor Company of Japan, Limited  

Jabra Network Card A125s User Manual
Jackson Dishwasher 07610 003 61 07 User Manual
JBL Professional Stereo Amplifier DP SERIES User Manual
Jensen TV Antenna ANHD20RTL12 User Manual
Jet Tools Saw 707000 User Manual
JL Audio Car Speaker 15W0v2 User Manual
Kenmore Washer 134190400 0209 User Manual
King Canada Drill KC 108C User Manual
KitchenAid Range KDRP462L User Manual
Konica Minolta All in One Printer 250 350 User Manual