DVD PLAYER &
VIDEO CASSETTE RECORDER
HR-XV3E
INSTRUCTIONS
EN
LPT0864-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
Failure to heed the following precautions may result in
damage to the unit, remote control or video cassette.
1. DO NOT place the unit —
— in an environment prone to extreme temperatures or
humidity.
— in direct sunlight.
— in a dusty environment.
— in an environment where strong magnetic fields are
generated.
— on a surface that is unstable or subject to vibration.
2. DO NOT block the unit’s ventilation openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get out.)
3. DO NOT place heavy objects on the unit or remote control.
4. DO NOT place anything which might spill on top of the unit
or remote control.
(If water or liquid is allowed to enter this equipment, fire or
electric shock may be caused.)
5. DO NOT expose the apparatus to dripping or splashing.
6. DO NOT use this equipment in a bathroom or places with
water. Also DO NOT place any containers filled with water or
liquids (such as cosmetics or medicines, flower vases, potted
plants, cups, etc.) on top of this unit.
INDEX
6
INSTALLING YOUR NEW UNIT
Recording Features ................................................................22
7. DO NOT place any naked flame sources, such as lighted
candles, on the apparatus.
8. AVOID violent shocks to the unit during transport.
MOISTURE CONDENSATION
Moisture in the air will condense on the unit when you move it
from a cold place to a warm place, or under extremely humid
conditions—just as water droplets form on the surface of a glass
filled with cold liquid. Moisture condensation on the head drum
will cause damage to the tape. In conditions where condensation
may occur, keep the unit turned on for a few hours to let the
moisture dry.
Playback Features ..................................................................31
Parental Lock .........................................................................44
ATTENTION
To mobile phone users:
Using a mobile phone in the vicinity of the unit may cause
picture vibration on the TV screen or change the screen to a
blue back display.
Edit To Or From Another Video Recorder ..............................55
On placing the unit:
Some TVs or other appliances generate strong magnetic fields.
Do not place such appliances on top of the unit as it may cause
picture disturbance.
REMOTE CONTROL
SUBSIDIARY SETTINGS
Mode Set (DVD deck) ............................................................65
Video Channel Set .................................................................73
Child Lock .............................................................................75
TROUBLESHOOTING
SPECIFICATIONS
LIST OF TERMS
76
79
80
Download from Www.Somanuals.com. All Manuals Search And Download.
4
EN
DISC INFORMATION
Region Number
About Discs
The world is divided into 6 regions for DVD VIDEO discs. DVD
VIDEO discs are assigned a region number to indicate which
region they may be played back in. A disc cannot be played
back on this unit unless the region number of the disc matches
that of the unit. The region number for this unit is “2”. Only discs
whose region number includes “2” can be played back such as
shown below.
Playable Discs
You can use discs with the following logos for playback only.
DVD VIDEO
Video CD/Super Video CD
Examples of DVD VIDEO labels which can be played back using
this unit.
Audio CD
2 3
4 5
1 2 3
4 5 6
ALL
2 5
CD-DA files
2
Marks of discs in this instruction manual
● The following discs also can be played back.
• DVD-R/RW discs recorded in DVD VIDEO format and
finalized.
• CD-R/RW discs recorded in Super Video CD, Video CD or
Audio CD format and finalized.
Allows operation with a
DVD VIDEO disc.
Allows operation with a
CD-R/RW disc.
Allows operation with a
Video CD disc.
Allows operation with a
SVCD disc.
• CD-R/RW discs recorded in MP3 format in accordance with
the “ISO 9660” format. (See page 48 for details.)
• CD-R/RW discs recorded in JPEG format in accordance with
the “ISO 9660” format. (See page 51 for details.)
● Discs other than the above cannot be played back.
● Operation and audio quality of this unit are not guaranteed for
discs that do not conform to the Compact Disc specification
(CD-DA).
Allows operation with a
disc including MP3 files.
Allows operation with a
disc including JPEG
files.
Allows operation with
an Audio CD disc.
DVD VIDEO Marks
Before you play back a CD, check for the CD logo and read
the notes on the package to confirm that it conforms to the
Compact Disc specification.
Sometimes marks are printed on a DVD disc and/or on its
packaging to indicate information regarding the contents and
functions of a disc. Check marks indicating the contents and
functions of a disc. Note, however, that in some cases a disc may
not include a mark even for a function it supports.
● Depending on the intentions of the author of the software,
recording conditions of DVD discs and Video CD discs may
be restricted. Since this unit plays back discs according to the
intentions of the author of the software as indicated on the
disc, some functions may not operate as commanded.
● When switching from the first layer to the second layer of
double-layered DVD VIDEO discs, the image and sound may
be momentarily distorted. This is not a malfunction.
Marks related to video
Number of subtitles
Number of angles
Recorded under the
standard 4:3 aspect
ratio
Screen includes black
bands at top and
bottom of image
which has a standard
4:3 aspect ratio (letter
box)
Unplayable Discs
The following types of discs cannot be played using this unit.
Do not attempt to play back any kind of disc that is damaged
(cracked, warped, or repaired with adhesive tape) or discs in
unusual shapes (heart-shaped, octagonal, or other forms). If such
discs are accidentally played back, it may cause noise that can
lead to speaker damage.
Video playback is in Wide video mode (16:9) on
wide televisions, but in letter box on televisions
with standard 4:3 aspect ratio.
● CD-ROM discs (including PHOTO-CD)
● DVD AUDIO discs
● Super Audio CDs (SACD)
● DVD-RW discs recorded in VR format
● DVD-RAM
● Discs which have a region number other than “2”
Video playback is in Wide video mode (16:9) on
wide televisions, but pan and scan is used on
televisions with standard 4:3 aspect ratio (either
the left or right side of the image is cut-out).
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
5
Marks related to audio
2 Place the disc.
Place the disc in the disc tray with
the label side facing up.
Number of audio tracks
● Since disc size changes depending on
the disc to be played back, be sure to
correctly align the disc with the
grooves for its size. If the disc is not in
its groove, it may be scratched or
otherwise damaged.
Dolby Digital mark
Dolby Laboratories has developed a digital
surround system for the home. This mark
indicates that you may enjoy 5.1-channel
audio (front left and right, center, rear left and
right, and a channel for LFE (Low-Frequency
Effects)).
● To insert an 8 cm disc, place it according to the inner groove.
Care and Handling of Discs
DTS (Digital Theater System)
How to handle discs
You can enjoy DTS audio if you connect an
amplifier with a built-in DTS decoder to the
DIGITAL AUDIO OUT connector of the unit.
When handling a disc, do not
touch the surface of the disc.
Since discs are made of
plastic, they are easily
damaged. If a disc gets dirty,
dusty, scratched or warped,
the images and sound will not
be picked up correctly, and such a disc may cause the unit to
malfunction.
File Structure of Discs
DVD VIDEO
Typically, DVD VIDEO discs are made up of larger units called
“titles”. Each title has a number (title number) that can be used
to select desired titles. Titles are further divided into units called
“chapters”. Each chapter has a number (chapter number) that
can also be used to select desired chapters. Note that some discs
are not divided into titles and chapters.
Label side
Do not damage the label side, stick paper to or use any adhesive
on its surface.
Storage
Title1
Title2
Make sure that discs are kept in their cases. If discs are piled on
top of one another without their protective cases, they can be
damaged. Do not put discs in a location where they may be
exposed to direct sunlight, or in a place where the humidity or
temperature is high. Avoid leaving discs in your car!
Chapter 2
Chapter 3
Chapter 1
Chapter 1
Chapter 2
Maintenance of discs
Audio CD/Video CD
If there are fingerprints or other dirt adhering
to a disc, wipe with a soft dry cloth, moving
from the center outwards.
Typically, Audio CD discs are divided into separate tracks each
containing one song. Each track is assigned a number. For
example, the third track is Track 3. The same is true for Video
CD discs.
If a disc is difficult to clean, wipe with a
cloth moistened with water. Never use
record cleaners, petrol, alcohol or any anti-
static agents.
Track 1
Track 2
Track 3
Track 4
CAUTION
NOTE:
Sometimes during playback, noise or images may be garbled.
This is sometimes due to the disc. (It may not be up to
industry standards.)
Video CD discs that support Playback Control (PBC)
The still image or motion image which follows a menu screen is
called a “scene”. Each scene has a scene number.
For more details, refer to “Locating a desired scene using the
menu of a Video CD with PBC” (੬ pg. 31).
These symptoms are caused by the discs, not by the
malfunction of the unit.
Placing a Disc
1 Open the disc tray.
Press x on the DVD deck to open the disc tray.
● Pressing the button again closes
the disc tray.
● Do not block the disc tray with
your hand while it is opening or
closing as this may result in
hardware failure.
● Do not place unplayable discs or
any object other than a disc in
the disc tray.
● Do not press down strongly on the disc tray or place any heavy
objects on it.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
EN
INDEX
FRONT VIEW
C Cassette Loading Slot
D VCR/DVD Button ੬ pg. 18, 21, 30
E Disc Tray
N Record Button (7) ੬ pg. 21
O Rewind Button (3) ੬ pg. 18, 19, 32
P Fast Forward Button (5) ੬ pg. 18, 19, 32
Q Programme Button (PR +/–) ੬ pg. 21
R Automatic Satellite Programming Button (SAT#)
੬ pg. 28
G Stop Button (8) ੬ pg. 18, 21, 30
H Play Button (4) ੬ pg. 18, 30
I DVD Open/Close Button (x) ੬ pg. 30
J Cassette Eject Button (x) ੬ pg. 18, 21
K Video/Audio Input Connectors (VIDEO/AUDIO)
੬ pg. 54
To access covered
connectors or buttons, pull
and open the cover.
L Infrared Beam Receiving Window
M Front Display Panel ੬ pg. 7
REAR VIEW
DVD
A Region Number Label ੬ pg. 4
F Digital Audio Output Connector
(DIGITAL AUDIO OUT) ੬ pg. 57, 61
G L-2 Input/Decoder Connector
B Mains Power Cord ੬ pg. 9
C L-1 Input/Output Connector (L-1 IN/OUT) ੬ pg. 9,
55, 60, 61
E Antenna Input Connector (ANTENNA IN) ੬ pg. 9
(L-2 IN/DECODER) ੬ pg. 55, 60, 61
H Remote Pause Connector (PAUSE) ੬ pg. 54
I
Antenna Output Connector (ANTENNA OUT)
੬
pg. 9
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
7
FRONT DISPLAY PANEL
A “Timer” Indicator ੬ pg. 25, 26
B Automatic Satellite Programme Recording Indicator
(N) ੬ pg. 28
D VCR Mode Indicator
E VCR Indicator ੬ pg. 22
F Cassette Type Indicator
G Tape Remaining Time Indicator ੬ pg. 22
H DVD Mode Indicator
C Channel/Clock Display
Mode Display (L-1, L-2, F-1 or SAT*)
* When “L-2 SELECT” is set to “SAT” (੬ pg. 64), “SAT” appears
instead of “L-2”.
Counter Display
Tape Speed (SP/LP) ੬ pg. 21
Multi-information window*
* The current group/title/track/chapter number(s), time and status
information.
If you press – –:– – on the remote control when “O.S.D.”
is set to “ON” (੬ pg. 63), various operational indicators
appear on the TV screen.
I VPS/PDC Indicator ੬ pg. 24, 26
J Type of Broadcast ੬ pg. 23
K Current Day/Month/Year
L Clock Display
For On-screen display for DVD deck, refer to “Using the
on-screen bar” (੬ pg. 35).
M Channel Position Number and Station Name/Auxiliary
Input Indicator (L-1, L-2, F-1 or SAT*)
* When “L-2 SELECT” is set to “SAT” (੬ pg. 64), “SAT” appears
instead of “L-2”.
N “Cassette Loaded” Mark
A Operation Mode Indicators
B Tape Speed (SP/LP)
C Tape Direction
D Index Mark Indicator (MARK) ੬ pg. 21
E Counter Display
F Tape Remaining Time Indicator ੬ pg. 22
G Audio Mode Display ੬ pg. 20
The tape position indicator
appears on the TV screen
when you press 3 or
5 from the Stop mode or
perform an Index Search.
(੬ pg. 19) The position of
“q” in relation to “0”
(beginning) or “+” (end)
shows you where you are
on the tape.
Beginning
End
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
EN
A VCR Button ੬ pg. 18, 21
REMOTE CONTROL
B TV/VCR/DVD switch ੬ pg. 14
D Auto Tracking Button ੬ pg. 20
J Reset Button (0000) ੬ pg. 22
Cancel Button (&) ੬ pg. 27
L Rewind Button (3) ੬ pg. 18, 19, 32
N Record Button (7) ੬ pg. 21
Review Button (
P rt Button ੬ pg. 10
) ੬ pg. 20
TV/VCR Programme Button (TV/VCR PR +/–)
੬ pg. 59
Q Set Up Menu Button (SET UP MENU) ੬ pg. 14
T DVD Button ੬ pg. 30
V TV Muting Button (^) ੬ pg. 59
Audio Monitor Button (A.MONITOR) ੬ pg. 20
W TV/VCR Button ੬ pg. 22
X Date Button (DATE +/–) ੬ pg. 26
Subtitle Button (SUB TITLE) ੬ pg. 40
Angle Button (ANGLE) ੬ pg. 41
display panel and illumination on the unit.
+: brightens the display
be used to operate your TV. (੬ pg. 59)
–: darkens the display
How To Use
Y Programme Button (PR +/–) ੬ pg. 21
a Timer Button (#) ੬ pg. 25, 26
Return Button (RETURN) ੬ pg. 31
੬ pg. 28
The remote control can operate most of your unit’s functions,
as well as basic functions of TV sets of JVC and other brands.
(੬ pg. 59)
● Point the remote control toward the receiving window.
● The maximum operating distance of the remote control is
about 8 m.
NOTES:
e Auxiliary Button (AUX) ੬ pg. 54
g Pause Button (9) ੬ pg. 19, 21, 30
h Forward Skip/Index Button (6) ੬ pg. 19, 31
i OK Button ੬ pg. 11
● When inserting the batteries, be sure to insert in the correct
directions as indicated under the battery cover.
● If the remote control doesn’t work properly, remove its
batteries, wait a short time, replace the batteries and then try
again.
j w e Button ੬ pg. 14
k Display Button (– –:– –) ੬ pg. 22
l Skip Search Button ( ) ੬ pg. 19
DVD Picture Button (DVD PICTURE) ੬ pg. 34
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
9
INSTALLING YOUR NEW UNIT
It’s essential that your unit be properly connected.
Basic Connections
THESE STEPS MUST BE COMPLETED BEFORE ANY
A Check the contents.
Mains outlet
TV aerial cable
Make sure the package contains all of the accessories
listed in “SPECIFICATIONS” on page 79.
Mains power cord
B Situate the unit.
Place the unit on a stable, horizontal surface.
C Connect the unit to TV.
The connection method you use depends on the type of
TV you have.
Back of unit
RF Connection
8To connect to a TV with NO AV input connectors —
A Disconnect the TV aerial cable from the TV.
B Connect the TV aerial cable to the ANTENNA IN
connector on the rear panel of the unit.
21-pin SCART cable
(not provided)
C Connect the provided RF cable between the
ANTENNA OUT connector on the rear panel of the
unit and the TV’s aerial connector.
AV Connection
If your TV is equipped with a 21-pin SCART connector,
perform AV connection to improve picture quality during
tape playback.
A Connect the aerial, unit and TV as per “RF
Connection”.
TV
RF cable (provided)
B Connect an optional 21-pin SCART cable between the
L-1 IN/OUT connector on the rear panel of the unit
and the TV’s 21-pin SCART connector.
Plug the end of the mains power cord into a mains outlet.
After the connection is completed, perform “Auto Set
Up” on page 10.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
EN
INITIAL SETTINGS
A Turn on the unit.
display appears on the TV screen.
Auto Set Up
Press 1 on the unit or remote control. The Country Set
Auto Channel Set/Auto Clock Set/
Auto Guide Program Number Set
NOTE:
If you have connected your TV to
the unit with RF connection and
the on-screen display appearing
on UHF channel 36 looks
distorted, perform “Video
Channel Set” on page 73.
After the 1 button on the unit or remote control is pressed
for the first time to power on the unit, by simply selecting
your country*, the Auto Set Up function sets the tuner
channels, clock** and Guide Program numbers
automatically.
* If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also
need to select your language.
**If you live in Hungary (MAGYARORSZÁG), Czech Republic (CESKÁ
REPUBLIKA), Poland (POLSKA) or other countries in Eastern Europe
(OTHER EASTERN EUROPE), set the clock manually.
B Select your country.
Press rt to move the
highlight bar (pointer) to your
country’s name.
● The TV aerial cable should be connected to the unit.
● The unit’s mains power cord should be connected to a
mains outlet.
(Example) DEUTSCHLAND is
selected.
● The TV should be set to its AV mode (with AV connection
੬ pg. 9) or UHF channel 36 (with RF connection
੬ pg. 9).
● Slide the TV/VCR/DVD switch to the right.
NOTES:
● If you have selected BELGIUM or SUISSE, go to step C.
● If you have selected MAGYARORSZÁG, CESKÁ REPUBLIKA,
POLSKA or OTHER EASTERN EUROPE, press OK. The Clock
Set screen appears. Set the clock manually (੬ pg. 74), then
go to step D.
● If you have selected any other country name, go to step D.
C Select the language.
Press OK. The Language Set
display appears on the TV
screen.
Press rt to move the
highlight bar (pointer) to the
language of your choice.
NOTE:
The selected language is only available on the screen for VHS
deck.
Set manually the on-screen language for the DVD deck.
(੬ pg. 16)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
11
D Perform Auto Set Up.
the front display panel and/or on the TV screen.
On the front display panel
Press rt to select “AUTO” and press OK or e.
ATTENTION
Once you have performed Auto Set Up, even if the unit’s
memory backup has expired, all the stored stations and their
performs only Auto Clock Set when the unit is turned on.
required.
Press OK. The AUTO SET/T-V LINK display appears on
● Video channel setting (for RF connection users) ੬ pg. 73
● Tuner setting ੬ pg. 68
On the on-screen display
Press rt to move the
highlight bar (pointer) to
“AUTO SET” and press OK or
e.
● Clock setting ੬ pg. 74
If a new station starts broadcasting in your area, perform
tuner setting (੬ pg. 68) and, if necessary, video channel
setting (੬ pg. 73).
NOTES:
Delivery Control) signal, the unit can perform neither Auto
Clock Set nor Auto Guide Program Number Set.
● If there is a power cut, or if you press 1 or SET UP MENU
while Auto Set Up is in progress, Auto Set Up will be
interrupted; be sure to turn off the unit power once and try
again from step A.
While Auto Set Up is in progress, do NOT press any
button on the unit or remote control until the front
display panel shows either the display as illustrated in
step E or “– –:– –” as illustrated on page 13.
reception condition.
● If no sound accompanies the picture or the audio sounds
(੬ pg. 70, “INFORMATION”)
● If you are using the on-screen
display, the AUTO SET
screen will appear. As Auto
Set Up progresses, the “q”
mark on the TV screen
moves from left to right.
After “Auto Set Up” is completed, perform “Monitor
Set (DVD deck)” on page 14.
Beginning
End
● When you have connected the unit to a TV offering T-V Link
via a fully-wired 21-pin SCART cable (੬ pg. 9) and the TV is
turned on, the unit automatically performs the Preset
Download (੬ pg. 12) even if you select “AUTO” or “AUTO
SET” for Auto Set Up function.
E Confirm/Set video channel.
With RF Connection
The video channel that is
shown on the display panel is
your video channel. Press OK.
● If you have selected
MAGYARORSZÁG, CESKÁ
REPUBLIKA, POLSKA or
OTHER EASTERN EUROPE in step B on page 10, “2” appears
instead of “1”.
● To view picture signals from the unit, set your TV to the video
channel.
With AV Connection
Press PR – until the display
panel shows “1 CH – –” (or
“2 CH – –”). Now the video channel is set to off. Then
press OK.
● To view picture signals from the unit, set your TV to its AV
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
EN
INITIAL SETTINGS (cont.)
A Perform Preset Download.
the front display panel and/or on the TV screen.
Preset Download
Press OK. The AUTO SET/T-V LINK display appears on
Program Number Set
On the front display panel
Press rt to select “CH – –” and press OK or e.
If you have connected the unit to your TV via the AV connection
(੬ pg. 9), the unit will automatically perform Preset Download
instead of the Auto Set Up in step D on page 11. After
downloading, the unit sets the clock and Guide Program
numbers automatically.
On the on-screen display
Press rt to move the
highlight bar (pointer) to
“T-V LINK” and press OK or
e.
ATTENTION
You can use this function only with a TV offering T-V Link,
etc.* Be sure to use a fully-wired 21-pin SCART cable.
SMARTLINK, Q-Link or DATA LOGIC via fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may
differ by system.
Preset positions on the front display panel increase from
“CH 1”; do NOT press any button on the unit or remote
control until the front display panel shows clock time,
“(CH) 1” or “– –:– –” as illustrated on page 13.
● Slide the TV/VCR/DVD switch to the right.
● Perform steps A to C of “Auto Set Up” on page 10 before
continuing.
● If you are using the on-screen
display, the T-V LINK screen
will appear. Then the GUIDE
PROG SET screen will appear
during Guide Program
Number Set. When Preset
Download is completed,
“COMPLETED” appears for
about 5 seconds, then the
normal screen appears.
● If you press any button on the
unit or remote control while
downloading is in progress, it
will be interrupted.
NOTES:
● For details, refer to the instruction manual of your TV.
● In areas where no TV station transmits a PDC (Programme
Delivery Control) signal, the unit can perform neither Auto
Clock Set nor Auto Guide Program Number Set.
● If there is a power cut, or if you press 1 or SET UP MENU
while downloading or set up is in progress, it will be
interrupted; be sure to turn off the unit power once and try
again from the beginning.
Set the video channel to off manually. (੬ pg. 73)
● Auto Clock Set may not function properly depending on the
reception condition.
● On this unit, the characters available for station names (ID) are
A–Z, 0–9, –, f, + and I (space). Some names of downloaded
stations may differ from those of your TV. (੬ pg. 71)
After “Preset Download” is completed, perform
“Monitor Set (DVD deck)” on page 14.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
13
INFORMATION
Results of Auto Set Up/Preset
Download appear on the front display
panel
Language for the on-screen display (VHS deck)
Auto Set Up also selects the language automatically for the on-
screen display depending on the Country setting you have made
in step B on page 10 (unless you have selected BELGIUM or
SUISSE), as shown below.
If both Auto Channel Set and Auto
SUOMI
]
]
]
]
]
]
]
SUOMI
ITALIA
]
]
]
]
]
]
ITALIANO
MAGYAR
PORTUGAL
DEUTSCHLAND
POLSKA
ENGLISH
DEUTSCH
POLSKI
MAGYARORSZÁG
ESPAÑA
CASTELLANO
NEDERLANDS
ENGLISH
successfully, the correct current time
NEDERLAND
OTHER WESTERN
EUROPE
is displayed.
NORGE
Turn on the TV and select its video channel or AV mode, then
make sure that all necessary stations have been stored in the
unit’s memory by using the PR button(s).
SVERIGE
SVENSKA
DANSK
ENGLISH
DANMARK
ÖSTERREICH
DEUTSCH
OTHER EASTERN
EUROPE
]
ENGLISH
C
ESKÁ
unit’s memory, the station name will be displayed at the top
left corner of the TV screen for about 5 seconds when the unit
is tuned to a different station.
● If you want to set the tuner manually such as to add or skip
channels, to change channel positions, or to set or change
station names, see pages 69 – 72.
REPUBLIKA
If you want to change the language setting manually, see “On-
screen Language Set (VHS deck)” on page 15.
Language for the on-screen display (DVD deck)
Set manually the on-screen language for the DVD deck.
(੬ pg. 16)
Just Clock
but Auto Clock Set has not, “CH 1”
Your unit is equipped with the Just Clock function which
provides accurate time keeping through automatic adjustments
at regular intervals, by reading data from a PDC signal. If you
want to take advantage of this function, simply set it to “ON”.
(੬ pg. 75, “Just Clock”)
(channel position) is displayed.
A Turn on the TV and select its video channel or AV mode, then
make sure that all necessary stations have been stored in the
unit’s memory by using the PR button(s).
left corner of the TV screen for about 5 seconds when the unit
is tuned to a different station.
T-V Link Functions
When you connect the unit to your TV via a fully-wired 21-pin
SCART cable (੬ pg. 9), the following functions are available.
You can use these functions only with a TV offering T-V Link,
etc.*
● If you want to set the tuner manually such as to add or skip
channels, to change channel positions, or to set or change
station names, see pages 69 – 72.
B Perform “Clock Set” on page 74.
For details, refer to the instruction manual of your TV.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link or DATA LOGIC via fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may differ by
system.
Clock Set have failed, “– –:– –” is
displayed.
Make sure the cables are connected properly and turn off the
unit’s power once, then turn the unit’s power back on again.
The Country Set display appears on the TV screen; perform
again.
TV Auto Power On
The TV will turn on and be set to its AV mode automatically
whenever you play a tape.
For details, refer to the instruction manual of your TV.
Unit Auto Standby
IMPORTANT
For details, refer to the instruction manual of your TV.
● To check if the Guide Program numbers have been set
correctly, perform the SHOWVIEW Timer Programming.
(੬ pg. 24) (VHS deck only)
Direct Rec (VHS deck only)
● In certain reception conditions, station names may not be
stored correctly, and auto Guide Program Number Set may not
properly when you timer-record a TV programme using the
SHOWVIEW system, the unit will record a TV programme of a
different station. When programming the timer using the
SHOWVIEW system, be sure to check the desired channel is
selected correctly. (੬ pg. 24, “SHOWVIEW® Timer
Programming”) (VHS deck only)
watching on your TV. When you use this function, set “DIRECT
REC” to “ON”. (੬ pg. 63)
● Your unit memorizes all detected stations even if reception of
some of them is poor. You can delete those stations with an
unacceptable picture. (੬ pg. 70, “Delete A Channel”)
Download from Www.Somanuals.com. All Manuals Search And Download.
14
EN
INITIAL SETTINGS (cont.)
D Select the mode.
Monitor Set
Press rt to move H to
“MONITOR TYPE”, then
press OK.
PICTURE
MONITOR TYPE
4:3LB
AUTO
ON
(DVD deck)
PICTURE SOURCE
SCREEN SAVER
You can select the monitor type depending on the TV
used when you play back DVD VIDEO discs recorded for
wide-screen TVs.
MP3
/
JPEG
MP3
SELECT
OK
USE
TO SELECT, USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP MENU].
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
E Select the mode setting.
Press rt to select the desired setting, then press OK.
F Return to the normal screen.
Press SET UP MENU.
* The default setting is bold in the table below.
8 MONITOR TYPE
16:9 NORMAL (Wide television conversion):
Select this when the aspect ratio of your TV is 16:9 (wide
TV).
16:9 AUTO (Wide television conversion):
Select this when the aspect ratio of your TV is fixed to 16:9
(wide TV). The unit automatically adjusts the screen width of
the output signal correctly when playing back a picture
whose aspect ratio is 4:3.
4:3 LB (Letter Box conversion):
Select this when the aspect ratio of your TV is 4:3
(conventional TV). While viewing a wide screen picture, the
black bars appear on the top and the bottom of the screen.
4:3 PS (Pan&Scan):
Select this when the aspect ratio of your TV is 4:3
(conventional TV). While viewing a wide screen picture, the
black bars do not appear; however, the left and right edges
of the pictures will not be shown on the screen.
A Turn on the unit.
Pan&Scan/Letter Box
In general, DVD VIDEO disc are produced for a wide-screen
TV with 16:9 aspect ratio.
Press 1.
Material with this ratio will not fit to a TV with 4:3 aspect
ratio. There are two styles to display the image, “Pan&Scan”
and “Letter Box”.
B Select the DVD deck.
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the unit
Pan&Scan
The right and left side of the image are
cut off. The image fills the screen.
On the remote control
Press DVD so that the DVD indicator lights up.
Letter Box
Black bands appear at the top and
bottom of the image. The image itself
appears in 16:9 aspect ratio.
C Access the DVD Set Up menu screen.
PICTURE
A Press SET UP MENU.
B Press w e to select
MONITOR TYPE
PICTURE SOURCE
SCREEN SAVER
4:3LB
AUTO
ON
“
PICTURE”.
MP3
/
JPEG
MP3
SELECT
OK
USE
TO SELECT, USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP MENU].
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
15
E Select the language.
Language
Press rt to move the
highlight bar (pointer) to the
language of your choice.
● You do not have to press OK;
pressing OK enters AUTO SET/
T-V LINK screen.
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
On-screen Language Set (VHS deck)
This VHS deck offers you the choice to view on-screen
messages in 13 different languages. Though Auto Set Up
selects the language automatically (੬ pg. 13), you can
change the language setting manually as required.
F Return to the normal screen.
Press SET UP MENU.
A Turn on the unit.
Press 1.
B Select the VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
C Access the Country Set screen.
A Press SET UP MENU.
B Press rt to move the
highlight bar (pointer) to
“AUTO CH SET”, then
press OK or e.
D Select your country.
Press rt to move the highlight bar (pointer) to your
country’s name, then press OK or e.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
EN
INITIAL SETTINGS (cont.)
On-screen Language Set (DVD deck)
Menu/Audio/Subtitle Language Set
(DVD deck only)
This DVD deck offers you the choice to view on-screen
messages in 3 different languages. You can change the
language setting manually as required.
Some DVD discs contain the DVD menu display, audio,
subtitle in multiple languages. With these discs, you can
set the default language as you like.
A Turn on the unit.
● The procedure shows how to set “MENU LANGUAGE”
on the DVD menu screen as an example.
Press 1.
A Turn on the unit.
B Select the DVD deck.
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
Press 1.
On the unit
B Select the DVD deck.
On the remote control
Press DVD so that the DVD indicator lights up.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
C Access the DVD Set Up menu screen.
LANGUAGE
On the remote control
Press DVD so that the DVD indicator lights up.
A Press SET UP MENU.
B Press w e to select
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
“
LANGUAGE”.
C Access the DVD Set Up menu screen.
LANGUAGE
ON SCREEN LANGUAGE ENGLISH
A Press SET UP MENU.
SELECT
B Press w e to select
USE
TO SELECT, USE OK TO CONFIRM.
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
TO EXIT, PRESS [SET UP MENU].
OK
“
LANGUAGE”.
ON SCREEN LANGUAGE ENGLISH
SELECT
USE
TO SELECT, USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP MENU].
D Select the mode.
OK
Press rt to move H to “ON
SCREEN LANGUAGE”, then
press OK.
LANGUAGE
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
D Select the mode.
ON SCREEN LANGUAGE ENGLISH
Press rt to move H to
“MENU LANGUAGE”, then
press OK.
LANGUAGE
SELECT
OK
USE
TO SELECT, USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP MENU].
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
ON SCREEN LANGUAGE ENGLISH
SELECT
OK
USE
TO SELECT, USE OK TO CONFIRM.
E Select the mode setting.
TO EXIT, PRESS [SET UP MENU].
Press rt to select the desired setting, then press OK.
E Select the mode setting.
F Return to the normal screen.
Press rt to select the desired setting, then press OK.
● See “Language Code List” (੬ pg. 17).
Press SET UP MENU.
F Return to the normal screen.
Press SET UP MENU.
NOTE:
When the selected language is not available on the disc, the
disc’s default menu language is played back.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
17
Language Code List
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
Afar
IK
Inupiak
RN
RO
RU
RW
SA
SD
SG
SH
SI
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Abkhazian
Afrikaans
Ameharic
Arabic
IN
Indonesian
Icelandic
Hebrew
IS
IW
JI
Yiddish
Javanese
Georgian
Kazakh
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
Greenlandic
Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
SK
BG
BH
BI
SL
Slovenian
Samoan
Shona
SM
SN
SO
SQ
SR
Bislama
Bengali, Bangla
Tibetan
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
GL
GN
GU
HA
HI
Somali
Kirghiz
Albanian
Serbian
Siswati
Breton
Latin
Catalan
Corsican
Czech
Lingala
SS
ST
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
SU
SV
SW
TA
TE
TG
TH
TI
Welsh
Danish
Bhutani
Greek
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
OM
OR
PA
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay (MAY)
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Esperanto
Estonian
Basque
Persian
TK
TL
Finnish
Fiji
TN
TO
TR
TS
Faroese
Frisian
Turkish
Tsonga
Tatar
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
TT
TW
UK
UR
UZ
VI
Twi
Ukrainian
Urdu
Uzbek
Hindi
Vietnamese
Volapuk
Wolof
HR
HU
HY
IA
Croatian
Hungarian
Armenian
Interlingua
Interlingue
PL
PS
PT
QU
RM
VO
WO
XH
YO
ZU
Xhosa
Yoruba
IE
Zulu
Download from Www.Somanuals.com. All Manuals Search And Download.
18
EN
OPERATIONS ON VHS DECK
A Load a cassette.
Basic Playback
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
Make sure the window side is
up, the rear label side is
facing you and the arrow on
the front of the cassette is
pointed toward the unit.
● Do not apply too much
pressure when inserting.
● If the record safety tab has been removed, playback begins
automatically. Although the DVD deck is selected, the VHS
deck is selected automatically if the DVD deck is in stop
mode.
● The unit’s power comes on automatically and the counter is
reset to 0:00:00.
B Select the VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
C Find the programme start point.
If the tape is advanced past the start point, press 3. To
go forward, press 5.
D Start playback.
Press 4. “BEST” appears blinking on the front display
panel during automatic tracking. (੬ pg. 23)
E Stop playback.
Press 8. Then press x on the VHS deck to remove the
cassette.
Usable cassettes
● Compact VHS
Clean the video heads using a dry cleaning
cassette — ECL-3F — when:
camcorder
recordings can be
played on this unit.
Simply place the
recorded cassette
into a VHS Cassette
Adapter and it can be used just like any full-sized VHS
cassette.
● This video recorder is equipped with SQPB (S-VHS QUASI
PLAYBACK) that lets you watch tapes recorded in the
S-VHS format and the SP mode with regular VHS
resolution.
● Rough, poor picture appears while a tape is played back.
● The picture is unclear or no picture appears.
● “USE CLEANING CASSETTE” appears on the screen (only
with “O.S.D.” set to “ON”). (੬ pg. 63)
NOTE:
The heads get dirty in the following cases:
● in an environment prone to extreme temperature or
humidity
● in a dusty environment
● flaw, dirt or mold on video tapes
● continuous usage for a long time
* SQPB does not deliver Super VHS resolution.
● This video recorder can record on regular VHS and Super
VHS cassettes. However, it will record regular VHS signals
only.
* S-VHS recording is not possible with this recorder.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
19
Skip Search
Playback Features
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
During playback, press
unwanted sections.
1 to 6 times to skip over
Each press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
To resume normal playback during a Skip Search,
press 4.
ATTENTION
In the search, still, slow-motion or frame-by-frame playback
mode,
● the picture will be distorted.
● the noise bars will appear.
● there may be a loss of colour.
● you cannot hear the sound.
Index Search
Your unit automatically marks index codes at the beginning of
each recording. This function gives you quick access to any one
of 9 index codes in either direction.
NOTE:
Before starting, make sure the unit is in the Stop mode.
Still Picture/Frame-By-Frame
Playback
Activate Index Search.
Press 2 or 6. “2 1” or “6 1” is displayed on
the TV screen and search begins in the corresponding
direction.
1 Pause during playback.
● To access index codes 2
Press 9.
Current position
through 9, press 2 or
6 repeatedly until the
correct index number is
displayed.
● If there is vertical jitter, press PR +/– on the remote control to
correct the picture.
2 Activate frame-by-frame playback.
Example:
Press 9.
To locate the beginning of B
from the current position,
Index number
press 2 twice.
Slow Motion
To locate the beginning of
D from the current position, press 6 once.
● When the specified index code is located, playback begins
automatically.
During still picture, press and hold 9 for 2 seconds, then
release. Press 9 and release again to return to still
picture.
● The speed changes for each direction by pressing 3 and
5 repeatedly.
Next Function Memory
The Next Function Memory “tells” the unit what to do after
rewinding. Before continuing, make sure the unit is in the Stop
mode.
NOTE:
During slow motion playback, some noise may appear on the TV
screen. Press PR + or – on the remote control to eliminate the
noises.
a- For Automatic Start Of Playback
Press 3, then press 4 within 2 seconds.
b- For Automatic Power Off
Press 3, then press 1 within 2 seconds.
c- For Automatic Timer Standby
Press 3, then press # within 2 seconds.
d- For Automatic Cassette Ejection After Tape Rewind
Press 3, then press x within 2 seconds.
Variable Speed Search
During playback, press 5 for forward variable speed
search, or 3 for reverse variable speed search.
● The speed changes for each direction by pressing 3 and
5 repeatedly.
When pressing 5: +5x{+7x
When pressing 3: –1x]–5x{–7x
(Once 3 is pressed, reverse search starts in –1x normal
playback speed. After this process, each press of 3 changes
the search speed between –5x and –7x.)
NOTE:
The search speed changes in the same way for SP and LP mode.
To resume normal playback, press 4.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
EN
OPERATIONS ON VHS DECK (cont.)
Manual Tracking
Your unit is equipped with automatic tracking
control. During playback, you can override this
and adjust the tracking manually by pressing the
PR buttons.
1 Override automatic tracking.
During playback, press p on the remote
control.
2 Adjust the tracking manually.
Press PR + or – on the remote control.
● Press p again to return to automatic tracking.
NOTE:
When a new tape is inserted, the unit enters the automatic
tracking mode automatically.
Soundtrack Selection
Your unit is capable of recording three soundtracks (HI-FI L,
HI-FI R and NORM) and will play back the one you select.
During Playback
Instant ReView
Simply by pressing a single button, the unit power comes on,
rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
Pressing A.MONITOR changes the soundtrack as follows:
TRACK
USE
On-Screen Display
NOTE:
HI FI
For Hi-Fi stereo tapes
L j h R
Before starting, make sure that the unit is off and that the Timer
mode is disengaged.
HI FI
L j
For main audio of Bilingual tapes
Activate Instant ReView.
HI FI
Press
. The unit power comes on and the unit
For sub audio of Bilingual tapes
h R
searches for the index code indicating the start of the last
timer-recorded programme. Once it’s found, playback
begins automatically.
NORM
For audio-dubbed tapes
For audio-dubbed tapes
HI FI
NORM
● To watch the first of the 3 programmes, press
three
times. The unit searches and begins playback automatically.
You can access a programme as far as 9 index codes away
from the current tape position.
NOTES:
● “HIFI L j h R” should normally be selected. In this mode,
audio track is played back automatically for tapes with only
normal audio.
Repeat Playback
● For instructions on recording stereo and bilingual
programmes, refer to page 23.
● “O.S.D.” must be set to “ON” or the on-screen displays will
not appear. (੬ pg. 63)
Your unit can automatically play back the whole tape 100 times
repeatedly.
1 Start playback.
Press 4.
2 Activate Repeat Playback.
Press 4 and hold for over 5 seconds, then release.
● The Play indicator ($) on the front display panel blinks slowly.
● After playing back a tape 100 times, the unit stops
automatically.
3 Stop Repeat Playback.
Press 8 at any time.
● Pressing 4, 3, 5 or 9 also stops Repeat Playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
21
D Set the tape speed.
display panel or TV screen. Press p again to change
the setting while the tape speed is displayed on the TV
screen.
Basic Recording
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
Press p. The current setting appears on the front
E Start recording.
Press and hold 7 and press 4 on the remote control, or
press 7 on the unit.
● If “O.S.D.” is set to “ON” (੬ pg. 63), “MARK” blinks on the
screen while an index code is being marked.
● When “DIRECT REC” is set to “ON” (੬ pg. 63), if you press
any button just after pressing 7 on the unit (or 7 and 4 on
the remote control), the unit may not function properly.
B.E.S.T. takes place at the beginning of both the first SP and
the first LP recording after inserting the cassette. (੬ pg. 23)
If “DIRECT REC” is set to “ON”, the programme that appears
on the TV screen will be recorded. (੬ pg. 63)
F Pause/Resume recording.
Press 9. Press 4 to resume recording.
● You can select channel during the Record Pause mode.
G Stop recording.
cassette.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording or timer recording (੬ pg. 21, 22, 26), the
recording will resume automatically when power is restored
to the unit unless the unit’s memory backup has expired.
A Load a cassette.
Insert a cassette with the record safety tab intact.
● The unit’s power comes on automatically and the counter is
reset to 0:00:00.
Accidental erasure
prevention
To prevent accidental recording
on a recorded cassette, remove its
safety tab. To record on it later,
B Select the VHS deck.
cover the hole with adhesive tape.
Record safety tab
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
C Choose a programme.
Press PR +/– or the number keys to select the channel
you wish to record.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
EN
OPERATIONS ON VHS DECK (cont.)
3 Set the recording duration.
If you want to record for more than 30 minutes, press 7
to extend the time. Each press extends recording time by
30 minutes.
Recording Features
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
NOTES:
● You can only perform ITR using the 7 button on the unit’s
front panel.
● Still picture playback stops automatically after 5 minutes to
protect the heads.
● When the end of the tape is reached during timer recording,
the unit stops and “⅜” and “$” blink on the front display
panel.
● When the end of the tape is reached during timer recording or
Instant Timer Recording, the unit is turned off and “⅜” and
“$” blink on the front display panel.
● During Instant Timer Recording, any other timer programmed
recording won’t start even if their start time has come. In such
a case, the timer programmed recording starts (if the end time
of the timer programmed recording is set after the end of
Instant Timer Recording) after the Instant Timer Recording
finishes.
Elapsed Recording Time Indication
1 Set the counter display.
Press – –:– – until a counter reading appears on the front
display panel.
Record One Programme While
Watching Another
2 Reset the counter.
Press 0000 before starting recording or playback.
● The counter is reset to “0:00:00” and shows the exact elapsed
time as the tape runs. You can check the exact time of a
recording or playback.
If your unit is connected to the TV via the AV connection,
press TV/VCR. The unit’s VCR indicator and the TV
broadcast being recorded disappear. Once recording is in
progress, all you need to do is to set the channel controls
on the TV for the station you wish to view.
Tape Remaining Time
● The programme selected with the TV’s channel controls
appears on the TV screen, while the one selected with the
unit’s PR buttons is recorded on the tape.
● If a decoder is connected to the unit (੬ pg. 61), you can
select a scrambled channel as well with the TV channel
controls.
Press – –:– – until the time remaining on the tape
appears.
● The front display panel shows the tape remaining time with
“z” displayed.
NOTE:
You can also use the DVD deck in the following cases. Before
use, be sure to turn on the unit and select the DVD deck.
● During recording
● By pressing the – –:– – button, you can change the display to
show the clock time, counter reading or tape remaining time.
● During timer recording
● During timer standby mode
NOTES:
● When you press – –:– –, the on-screen display appears on the
TV screen for 5 seconds, then the displays other than the
counter disappears. To clear the counter display, press – –:– –.
● Depending on the type of tape being used, the tape remaining
time reading may not appear right away, or is not correct.
“– –:– –” may sometimes appear, or the display may blink on
occasion.
Instant Timer Recording (ITR)
This easy method lets you record for
from 30 minutes to 6 hours (selectable in
30-min. increments), and shuts the unit
off after recording is finished.
1 Start recording.
Press 7 on the unit.
2 Engage the ITR mode.
Press 7 again. “⅜” blinks and “0:30” appears on the
front display panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
23
Receiving Stereo and Bilingual
Programmes
B.E.S.T. Picture System
Your unit is equipped with a Sound-Multiplex decoder (A2) and
a Digital stereo sound decoder (NICAM) making reception of
stereo and bilingual broadcasts possible.
The B.E.S.T. (Biconditional Equalised Signal Tracking)
system checks the condition of the tape in use during
playback and recording, and compensates to provide the
highest-possible playback and recording pictures. You
can set “B.E.S.T.” to “ON” or “OFF” to your preference.
(੬ pg. 63)
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.
Type of Broadcast Being
On-screen Display
Received
Playback
A2 Stereo
ST
The unit assesses the quality of the tape once you initiate
playback.
A2 Bilingual
BIL.
Regular Monaural
NICAM Stereo
NICAM Bilingual
NICAM Monaural
(none)
● The unit adjusts the playback picture quality based on the
quality of the tape in use.
● B.E.S.T. is active during automatic tracking. “BEST” appears
blinking on the front display panel.
ST NICAM
BIL. NICAM
NICAM
● “BEST” only appears at the beginning of automatic tracking.
Even though it doesn’t appear after that, the B.E.S.T. function is
operative.
● To listen to a stereo programme, press A.MONITOR until
“HIFI L j h R” appears on the TV screen.
● To listen to a bilingual programme, press A.MONITOR until
“HIFI L j” or “HIFI h R” appears on the TV screen.
receiving a NICAM broadcast, press A.MONITOR until
“NORM” appears on the TV screen.
Recording
The unit assesses the quality of the tape once you initiate
recording.
NOTE:
● The unit spends approximately 7 seconds assessing the
condition of the tape, then begins recording.
“O.S.D.” must be set to “ON”, or the on-screen displays will not
appear. (੬ pg. 63)
To Record Stereo and Bilingual Programmes (A2)
Stereo programmes are automatically recorded in stereo on the
Hi-Fi audio track (with the normal audio track recording mixed L
and R channel sound).
● Bilingual programmes are automatically recorded in bilingual
on the Hi-Fi audio track. The main soundtrack will be
recorded on the normal audio track.
ATTENTION
Since the B.E.S.T. system works before recording actually
starts, there is a delay of approximately 7 seconds after 7
and 4 on the remote control are pressed, or 7 on the unit is
pressed. To make sure you record the desired scene or
programme in its entirety, first perform the following steps:
A Press and hold 9 and press 7 to engage the Record Pause
mode.
To Record NICAM Stereo and Bilingual Programmes
The NICAM audio programme will be recorded on the Hi-Fi
audio track, and the standard audio programme will be recorded
on the normal audio track.
● The unit then automatically checks the condition of the
tape and, after approximately 7 seconds, re-enters Record
Pause mode.
B Press 4 to start recording.
If you want to bypass the B.E.S.T. system and begin recording
immediately, set “B.E.S.T.” to “OFF”. (੬ pg. 63)
NOTES:
● If the quality of stereo sound being received is poor, the
broadcast will be received in monaural with better quality.
● Before playing back a programme recorded in stereo, or a
bilingual programme, refer to “Soundtrack Selection” on
page 20.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
EN
OPERATIONS ON VHS DECK (cont.)
SHOWVIEW® Timer
C Enter the SHOWVIEW number.
Press the number keys to
enter the SHOWVIEW number
of a programme you wish to
record.
Programming
With the SHOWVIEW system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your unit is able to recognize.
● If you make a mistake, press &
and input the correct number.
SHOWVIEW SYSTEM
Before performing the SHOWVIEW Timer
Programming:
● Make sure that the unit’s built-in clock is set properly.
● Insert a cassette with the safety tab in place. The unit will
come on automatically.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/VCR/DVD switch to the right.
D Access the SHOWVIEW Program screen.
SHOWVIEW Program screen
appears (if you’re just starting
out, “P1” appears).
Press OK, then the
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, or “TV PROG” shows “– –”, press PR +/– to
input the channel position number on which your unit
receives the station, then press OK or e.
● If the number you entered is invalid, “ERROR” appears on the
TV screen. Press & and input a valid SHOWVIEW number.
E Set the tape speed.
Press p.
F Set the VPS/PDC mode.
“OFF”.
A Select the VHS deck.
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
● If “VPS/PDC ON” is displayed on the TV screen, “VPS/PDC” is
set to “ON”.
On the unit
● If “VPS/PDC OFF” is displayed on the TV screen, “VPS/PDC”
is set to “OFF”.
੬ “VPS/PDC Recording” on page 25.
On the remote control
Press VCR so that the VCR indicator lights up.
B Access the SHOWVIEW screen.
Press PROG.
SHOWVIEW SYSTEM
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
25
VPS/PDC Recording
Press PROG or OK. “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears.
Now available from some TV stations, PDC (Programme
Delivery Control) and VPS (Video Programme System) are
service designed to assure safe, accurate timer recording.
With this system, special code signals are transmitted
together with the audio/video signals. These code signals
control your unit and have precedence over the advertised
times you may have preset into the timer. This means that
your unit will start and stop recording when the preset TV
programmes actually start and end — even if the broadcast
time of a preset TV programme is changed.
● Repeat steps B – G for each additional programme.
H Engage the unit’s timer mode.
Press #. The unit turns off automatically and “#”
appears on the front display panel.
● To disengage the timer mode, press # again.
NOTES:
● When you use Express Timer Programming, set the start
time (VPS or PDC time) exactly as advertised in the TV
listing. A different time than advertised will result in no
recording.
NOTES:
● To Change The Stop Time:
— press STOP +/– after pressing OK in step D. You can
compensate for anticipated programme schedule delays.
● To Timer-Record Weekly Or Daily Serials:
— after pressing OK in step D, press WEEKLY (number key
“9”) for weekly serials or DAILY (number key “8”) for daily
serials (Monday — Friday). Either “WEEKLY” or “DAILY”
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
● VPS/PDC recording is also possible when a satellite
receiver or a cable system is connected to L-2 IN/
DECODER connector on your unit.
● VPS/PDC recording is also possible via the L-1 IN/OUT
connector.
● You can programme this unit to timer-record as many as 8
programmes. If you try to programme the unit to record a
ninth, “PROGRAM FULL” appears on the TV screen and
“FULL” appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes. (੬ pg. 27)
● If there is a conflict in the timer schedule and one programme
overlaps with another, the programme starting earlier or
programme with the lower programme number will be
recorded.
How to check if the station being received transmits a
VPS/PDC signal
A Press – –:– – until the channel position appears on the
front display panel.
B Hold down START + for about 5 seconds.
“VPS/PDC” appears blinking on the TV screen.
If a VPS/PDC signal is detected from the station,
“VPS/PDC” will stop blinking.
If no VPS/PDC signal is detected from the station,
“VPS/PDC” will blink at a slower rate.
C Press – –:– – or START + again to return to normal display.
Satellite Receiver Users
To timer-record a satellite broadcast using the SHOWVIEW
system:
A Set “L-2 SELECT” to “A/V”. (੬ pg. 64)
B Perform steps A – H.
C Set the satellite receiver to the appropriate channel before
the selected programme begins.
D Leave the satellite receiver’s power on.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
EN
OPERATIONS ON VHS DECK (cont.)
D Enter the programme start time.
Express Timer
Programming
Press START +/– to enter the
time you want recording to
start.
● Press and hold START +/– to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
If you do not know the SHOWVIEW number for the programme
you wish to record, use the following procedure to set your unit
to timer-record the programme.
Before performing Express Timer Programming:
● Make sure that the unit’s built-in clock is set properly.
● Insert a cassette with the safety tab in place. The unit will
come on automatically.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/VCR/DVD switch to the right.
E Enter the programme stop time.
Press STOP +/– to enter the time you want recording to
stop.
● Press and hold STOP +/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
F Enter the programme date.
Press DATE +/–.
● The current date appears on the TV screen. The date you enter
appears in its place.
G Enter the channel position.
Press PR +/–.
H Set the tape speed.
Example: To timer-record the programme from 21:00 to
22:00 on 25th December, on channel 1.
Press p.
A Select the VHS deck.
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
I Set the VPS/PDC mode.
On the unit
“OFF”.
● If “VPS/PDC ON” is displayed on the TV screen, “VPS/PDC” is
set to “ON”.
● If “VPS/PDC OFF” is displayed on the TV screen, “VPS/PDC”
is set to “OFF”.
੬ “VPS/PDC Recording” on page 25.
On the remote control
Press VCR so that the VCR indicator lights up.
B Access the SHOWVIEW screen.
Press PROG.
Press PROG or OK. “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears.
C Access the Programme screen.
● Repeat steps B – J for each additional programme.
Press START +/–. (If you’re
just starting out, “P1”
appears.)
K Engage the unit’s timer mode.
Press #. The unit turns off automatically and “#”
appears on the front display panel.
● To disengage the timer mode, press # again.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
27
To Timer-Record Weekly Or Daily Serials:
Check, cancel and change programmes
— anytime during steps D through I, press WEEKLY (number
key “9”) for weekly serials or DAILY (number key “8”) for daily
serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears
on the TV screen. Pressing the button again makes the
corresponding indication disappear.
A Disengage the timer mode.
Press #, then press 1.
NOTES:
● You can programme this unit to timer-record as many as 8
programmes. If you try to programme the unit to record a
ninth, “PROGRAM FULL” appears on the TV screen and
“FULL” appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes. (੬ “To cancel or change a programme”)
● If there is a conflict in the timer schedule and one programme
overlaps with another, the programme starting earlier or
programme with the lower programme number will be
recorded.
B Access the Programme Check screen.
Press ".
Satellite Receiver Users
To timer-record a satellite broadcast using Express Timer
Programming:
A Set “L-2 SELECT” to “A/V”. (੬ pg. 64)
B Perform steps A – K. Enter “L-2” for the channel position
in step G.
C Set the satellite receiver to the appropriate channel before
the selected programme begins.
D Leave the satellite receiver’s power on.
C Access the Programme screen.
Press " again to check
more information. Each time
you press ", the next
programme’s information
appears.
To cancel or change a programme
D Cancel or change a programme.
Press & to cancel a programme. To change programme
settings, press the appropriate button: START +/–,
STOP +/–, DATE +/–, PR +/–, VPS/PDC (number key
“7”), DAILY (number key “8”), WEEKLY (number key
“9”) and/or p.
E Return to the normal screen.
Press " as many times as necessary. If there are still
some programmes remaining, go on to step F.
F Return to the timer mode.
Press #.
NOTE:
You can also check the programmes on the front display panel
even if the unit’s power is off (unless the unit is in the Power Save
mode ੬ pg. 64) or the unit is in the Timer mode; however, it is
not possible to cancel or change the programmes.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
EN
OPERATIONS ON VHS DECK (cont.)
C Cancel or change programme setting.
To cancel a programme, press & when the Programme
screen you do not want is shown. “PROGRAM
COMPLETED” appears on the TV screen for about 5
seconds, then the normal screen appears.
To change a programme, press the appropriate button:
START +/–, STOP +/–, DATE +/–, PR +/–, VPS/PDC
(number key “7”), DAILY (number key “8”), WEEKLY
(number key “9”) and/or p when the Programme
screen on which you want to make changes is shown,
then press OK. “PROGRAM COMPLETED” appears on
the TV screen for about 5 seconds, then the normal
screen appears.
NOTE:
If the overlap is not yet solved, or another overlap occurs with
the timer programme setting after making the last correction on a
programme, the conflicting programmes will be shown on the
Programme Check screen again. Repeat the above steps again
until the overlap is solved.
Automatic Satellite
When programmes overlap each other
Programme Recording
If “PROGRAM OVERLAPPED” appears, you have another
programme overlapping the programme you have just made.
The Programme Check screen appears and conflicting
programmes will start blinking.
This function allows you to automatically record a
satellite programme which is timer-programmed on your
external satellite receiver. Connect a satellite receiver to
the unit’s L-2 IN/DECODER connector and programme
the timer on the satellite receiver. The unit starts or stops
recording by the signals input from the satellite receiver.
After recording, the unit’s power shuts off automatically.
ATTENTION
● Be sure not to turn on the satellite receiver before the
programme is executed; otherwise, the unit will start
recording when the satellite receiver’s power is turned on.
● If you have connected another appliance other than a
satellite receiver to the L-2 IN/DECODER connector, be
sure not to engage the Automatic Satellite Programme
Recording mode; otherwise, the unit will start recording
when the connected appliance’s power is turned on.
● Automatic Satellite Programme Recording and timer-
recording cannot be done at the same time.
Example: Programme 1 (you have just made) and
Programme 4 overlap each other.
A Confirm the overlapping programmes.
Overlapping programmes blink on the TV screen.
B Select the programme to modify.
Press rt, then press OK or e.
● You can only select one of the overlapping programmes.
NOTE:
If you do not mind this overlap, press PROG to finish the timer
programme setting. The programme with the lower programme
number will be recorded and the other one will not be recorded
correctly. If no changes are made for approximately 1 minute,
the unit will return to the normal screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
29
NOTES:
Before performing the following steps:
● Make sure the satellite receiver is connected to the unit’s
L-2 IN/DECODER connector. (੬ pg. 60)
● Programme the timer on the satellite receiver.
● Insert a cassette with the safety tab in place.
● Slide the TV/VCR/DVD switch to the right.
● Operations on the DVD deck are not possible when the
Automatic Satellite Programme Recording mode is engaged or
timer recording is in progress.
● To disengage the Automatic Satellite Programme Recording
mode, press REC LINK. The “N” indicator goes off.
● If the unit’s power is off, it is not possible to engage the
Automatic Satellite Programme Recording mode.
● In step D, if the “N” indicator does not light but instead blinks
quickly even though your satellite receiver’s power is off,
Automatic Satellite Programme Recording will not work
properly with that satellite receiver*. If this is the case, perform
“Express Timer Programming” (੬ pg. 26) to timer-record a
satellite programme.
* Some satellite receivers output signals even if the power is off.
Automatic Satellite Programme Recording is not possible with those
satellite receivers.
Recording is in progress.
A Select the VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
● For timer programming of the satellite receiver, refer to the
instruction manual of the satellite receiver.
● Automatic Satellite Programme Recording is not possible if
your satellite receiver does not have a timer.
● Pressing the unit’s 1 button while Automatic Satellite
Programme Recording is in progress turns off the unit’s power
and disengages the Automatic Satellite Programme Recording
mode.
B Select the L-2 SELECT mode.
Set “L-2 SELECT” to “A/V” or “SAT”. (੬ pg. 64)
● When you select “SAT”, refer to “IMPORTANT” on page 60.
C Set the tape speed.
● If there are more than one satellite programmes you wish to
record with Automatic Satellite Programme Recording, it is not
possible to set different tape speeds for each programme.
● Depending on the type of satellite receiver, the unit may not
record a slight portion of the beginning of the programme or
may record slightly longer than the actual length of the
programme.
Press p.
Engage the Automatic Satellite Programme
Recording mode.
D
On the unit
● If you engage the Automatic Satellite Programme Recording
not start Automatic Satellite Programme Recording even
though the “N” and “#” indicators blink. When the satellite
receiver shuts off once and is turned back on again, the unit
starts recording.
● You can also record a programme from your cable system in
the same way if the system has a timer.
● The B.E.S.T. system (੬ pg. 23) does not work while Automatic
Satellite Programme Recording is in progress.
● Just Clock (੬ pg. 75) does not work when the Automatic
Satellite Programme Recording mode is engaged.
Press and hold SAT# for
about 2 seconds.
On the remote control
Press and hold REC LINK
for about 2 seconds.
● The “N” and “#” indicators
light up and the unit turns
off automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
EN
OPERATIONS ON DVD DECK
To play back an MP3/JPEG disc, see pages 48 – 53.
Basic Playback
A Load the disc.
the disc tray.
● The unit’s power comes on
automatically.
B Place the disc in the disc tray.
● For details, refer to “Placing a Disc”
(੬ pg. 5).
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
C Press x on the DVD deck to close the disc tray.
● Pressing 4 also closes the disc tray.
● Playback begins automatically if an auto-playback DVD disc is
loaded. Although the VHS deck is selected, the DVD deck is
selected automatically if the VHS deck is in stop mode.
B Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the remote control
Press DVD so that the DVD indicator lights up.
C Start playback.
Press 4.
Example: DVD VIDEO
Title number Chapter number
● It may take a few seconds to start playback.
● If you load a DVD disc whose region code does not match the
DVD deck, “REGION CODE ERROR!” appears on the TV
the menu display may appear on the TV screen after starting
playback. In this case, select an item which you want to play
back from the menu. Otherwise, the playback cannot go
forward. Refer to “Locating a desired scene using the menu of
a Video CD with PBC” (੬ pg. 31) or “Locating a desired
scene using the DVD menu” (੬ pg. 31).
ATTENTION
● You can not use the DVD deck when the VHS deck is in
the Automatic Satellite Programme standby and recording
mode.
● You can use the DVD deck when the VHS deck is in the
timer standby mode.
D Pause playback.
Press 9.
● To resume normal playback, press 4.
Press 8. Press x on the DVD deck to open the disc tray,
then remove the disc.
● Pressing 4 resumes playback from the position where you
stopped playback. For details, see “Resume Function” on
page 32.
NOTE:
When you press x while the unit is turned off, the unit’s power
comes on and the disc tray opens automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
31
Locating a desired scene using the
DVD menu
Playback Features
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
DVD VIDEO discs may have two types of menus; top menu and
disc menu.
Top menu
Playback Control (PBC) Function
— Locating a desired scene using the
menu of a Video CD with PBC
DVD discs generally have their own menus which show the disc
contents. These menus contain various items such as titles of a
movie, names of songs, or artist information. You can locate a
desired scene by using the top menu displayed on the TV screen.
Press TOP MENU to access the top menu.
Disc menu
DVD discs have a disc menu to select subtitle and audio
language etc. for each title.
Press MENU to access the disc menu.
Some Video CD discs support the PBC function. PBC is an
abbreviation of “PlayBack Control.” A Video CD disc recorded
with PBC has its own menus, such as a list of the songs on the
disc. You can locate a specific scene by using the menu.
1 Access the DVD menu.
Press TOP MENU or MENU.
2 Start playback.
1 Access the PBC menu.
In stop mode
Press 4.
● Depending on a disc, PBC
menu may automatically appear
on the TV screen by simply
loading a disc on the unit.
Press rt w e to select a
desired item, then press OK.
● It may be possible to select the
desired item using the number
Example:
keys depending on the disc.
NOTES:
● When “X” appears on the TV screen in step 1, the disc does
not have a top menu or disc menu.
During playback
Press RETURN.
● Top menu or disc menu may not appear depending on the
discs even if it is recorded in DVD VIDEO format and
finalized. In that case, press 8 to display the total number of
titles on a disc, then press the appropriate number keys to
select the desired title.
● “PBC” appears on the front display panel.
2 Start playback.
Press the appropriate number keys.
● The unit starts playback of the selected item.
● When “NEXT” or “PREVIOUS” appears on the TV screen:
Pressing 6 advances to the next page.
Pressing 2 returns to the previous page.
● You can return to the menu by pressing RETURN.
● The method of the operation is different depending on the
disc.
Locating the start point of the item or
skip the item
NOTES:
Press 2 or 6 during playback.
● If you want to playback a PBC-compatible Video CD disc
without activating the PBC function, start playback by using
the number keys instead of the 4 button.
Example:
Current position
To locate the beginning of
item B from the current
position, press 2 twice.
To locate the beginning of
item D from the current
position, press 6 once.
● When the specified item is
located, playback begins
automatically.
● To activate the PBC function when a PBC-compatible Video
CD disc is being played back without the PBC function, press
TOP MENU or MENU, or press 8 (press twice when
“RESUME” is set to “ON”) then press 4.
The number you press the button
Download from Www.Somanuals.com. All Manuals Search And Download.
32
EN
OPERATIONS ON DVD DECK (cont.)
Still Picture/Frame-By-Frame
Playback
1 Pause during playback.
Press 9.
2 Activate frame-by-frame playback.
Press 9 to advance a still picture.
● To resume normal playback, press 4.
Slow Motion
During playback, press 9, then press 3 for reverse
slow motion playback, or 5 for forward slow motion
playback.
● Each press of 5 changes the playback speed as follows:
1/32]1/16]1/4]1/2
● Each press of 3 changes the playback speed as follows
(only for DVD VIDEO discs):
–1/32]–1/16]–1/4]–1/2
● To resume normal playback, press 4.
Variable Speed Search
NOTES:
● Reverse slow motion playback is possible only with the DVD
VIDEO discs.
During playback, press 5 for forward variable speed
search, or 3 for reverse variable speed search.
● The more times you press, the faster the playback picture
moves.
● This function may not works for some Video CD or SVCD.
● To resume normal playback, press 4.
Resume Function
OR
During playback, press and hold 6 for forward
variable speed search, or press and hold 2 for reverse
variable speed search.
It is possible to memorize the position where you stop playback
and resume playback from that position.
● Be sure to set “RESUME” to “ON” or “DISC RESUME”.
(੬ pg. 67)
● While you press and hold the button, the image is played back
at 5x speed.
● To resume normal playback, release 2 or 6.
NOTES:
1 Memorize a resume point.
● Actual speed may be different from that displayed on the TV
screen depending on the discs.
Press 8 during playback.
● “RESUME STOP” appears on the front display panel.
● The unit enters Resume Stop mode and memorizes the
position where you stop playback as the resume point.
● The unit retains a memory of the resume points of the last 30
discs played back, even though they have been ejected if
“RESUME” is set to “DISC RESUME”. (੬ pg. 67)
● To clear the resume point:
● Playback sound is not heard in any variable speed search
mode other than in 1.5x speed search mode.
● During 1.5x speed search of a DVD VIDEO disc, you can hear
the played back audio converted into Linear PCM format in
stereo. In such a case, the pitch and sound quality may change
depending on the disc.
● In case of DVD VIDEO discs formatted in DTS format, SVCD
or Audio CD discs, playback sound is not heard during 1.5x
speed search.
When “RESUME” is set to “ON”:
• Press 8 in stop mode.
• Press 1 to turn off the unit.
● When switching to 1.5x speed search during variable speed
search, first press 4 to return to normal playback, then press
5.
• Eject the disc.
When “RESUME” is set to “DISC RESUME”:
• Set “RESUME” to “OFF”. (੬ pg. 67)
• Press 8 in stop mode.
2 Resume playback.
Press 4. The unit starts playback from the resume point.
● “RESUME PLAY” appears on the front display panel.
NOTES:
● Resume Function does not work on the Audio CD. It also may
not work depending on the discs.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
33
● If you stop the playback of a disc for which an resume point
has already been memorized, the memory will be updated
with the new resume point.
3D Phonic
● After the unit has memorized the resume point for 30 discs,
remembering a new resume point will cause the unit to delete
the oldest memorized point. Stopping playback of a disc for
which a resume point is already stored may change the order
in which the points are stored. This may potentially change the
order in which points are deleted.
The 3D Phonic function allows you to get a simulated surround
effect from your stereo system. You can enjoy vertical surround
sound with your 2-channel stereo system.
● When the unit memorizes a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
● This function may not works for some Video CD or SVCD.
1 Access the selection menu.
Press 3D-PHONIC during playback.
● The current setting appears on the right bottom corner of the
TV screen.
Zooming
2 Select the mode.
Press w e repeatedly, then
press OK.
Press ZOOM during playback or while paused.
● Each press of ZOOM changes the magnification as follows:
1.8x]4x]8x]16x]32x]64x
● When a 16:9 aspect picture source is displayed on a 4:3
aspect TV (conventional TV) in Letter Box conversion mode,
the margins in black shown on top and bottom of the TV
screen will be cropped by selecting 1.8x magnification. In
such a case, note that both left and right side parts of the
picture will also be cropped.
Selected mode
Effect level
NONE]ACTION]DRAMA]THEATER](Back to the
beginning)
● While zoomed, the picture may look coarse or distorted.
NONE:
ACTION:
No effect
Suitable for action movies and sports
programmes in which sounds dynamically
move.
DRAMA:
Provides natural and warm sound. You can
enjoy movies in a relaxed mood.
You can enjoy sound effects like in a major
theater.
Zoomed-in area
Current magnification
THEATER:
Press rt w e to move the
● The selection menu disappears automatically if you do not
zoomed-in scene.
change the selection for 10 seconds.
● To resume normal playback,
press OK.
3 Select the effect level.
Press rt to select the desired effect level. (level 1 to 5)
● To resume normal playback, press 3D-PHONIC.
NOTES:
● The 3D Phonic function works correctly only when playing
back a DVD VIDEO disc recorded in the Dolby Digital format.
With other sources, you cannot get any effect if you activate
the 3D Phonic function.
● When playing back a DVD VIDEO disc recorded with Dolby
Digital that does not contain the rear signal, you cannot get a
correct 3D Phonic sound even if you activate the 3D Phonic
function.
● The 3D Phonic function does not affect the Dolby Digital
bitstream signal from the DIGITAL AUDIO OUT connector.
● When 3D Phonic function is activated, Analog Down Mix and
D. Range Control functions are disabled. (੬ pg. 66)
Download from Www.Somanuals.com. All Manuals Search And Download.
34
EN
OPERATIONS ON DVD DECK (cont.)
To adjust picture appearance manually
3 Access the USER menu.
Press w e repeatedly to
select “USER 1” or “USER 2”.
USER 1
+
+
+
+
+
+
+
GAMMA
0
0
0
0
0
3
0
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY
4 Select the parameter.
Press rt repeatedly to select a parameter you want to
adjust, then press OK.
● Adjust gradually and confirm picture appearance results are as
preferred.
GAMMA
Controls brightness of neutral tints while
maintaining brightness of dark and bright
portions.
(–4 to +4):
BRIGHTNESS Controls screen brightness.
(–16 to +16):
CONTRAST
Controls screen contrast.
(–16 to +16):
SATURATION Controls screen colour depth.
VFP function
— Adjusting the picture quality
(–16 to +16):
TINT
Controls screen tint.
(–16 to +16):
SHARPNESS Controls screen sharpness.
(+0 to +3):
The VFP (Video Fine Processor) function enables you to adjust
the picture character according to the type of programming,
picture tone or personal preference.
Y DELAY
Controls screen colour gap.
(–2 to +2):
● VFP menu disappears and the following pop-up window
appears on the TV screen.
NOTE:
Before you start operation;
The VFP setting screen disappears if no operations are done for
more than about 10 seconds. If the setting screen disappears
before you finish, start from step 1 again.
+
GAMMA
0
+
GAMMA
0
1 Access the VFP setting menu.
Press DVD PICTURE during
NORMAL
playback.
+
+
+
+
+
+
+
GAMMA
0
0
0
0
0
3
0
● The current setting appears on
the TV screen.
BRIGHTNESS
CONTRAST
SATURATION
TINT
Press rt repeatedly to change the setting, then press
OK.
● The current VFP settings appear again.
SHARPNESS
Y DELAY
6 Adjust the other parameters.
Repeat steps 4 and 5 to adjust other parameters.
2 Select the VFP mode.
To return to the normal screen
Press DVD PICTURE.
Press w e repeatedly.
● Each time you press w e, the VFP mode changes as follows:
NORMAL]CINEMA]USER 1]USER 2](Back to the
beginning)
To activate your setting
“USER 1” or “USER 2” that you have changed the
parameters.
NORMAL:
CINEMA:
Select this normally.
Suitable for movie.
USER 1/
USER 2:
You can adjust parameters that affect picture
appearance and store settings. Go to step 3.
NOTE:
You cannot adjust the parameters of “NORMAL” and “CINEMA”.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
35
Basic operation on the on-screen bar
Example: When selecting the Repeat mode of DVD
During playback or while stopped
Using the on-screen bar
You can check disc information while the disc is loaded and you
can use some functions using the on-screen bar. The on-screen
bar allows you the various playback operations.
A Access the on-screen bar.
Press PLAY SETUP twice. The on-screen bar appears on
the TV screen.
● The currently selected item is highlighted.
How to Access the on-screen bar
Press PLAY SETUP twice whenever a disc is loaded.
Example: During DVD VIDEO playback
B Select the menu item.
pop-up window appears under the selected item.
● The current setting appears.
Example: During Video CD playback
Press w e to move H to
, then press OK. The
Contents of the on-screen bar during playback
DVD
C Select the option.
Press rt to select the desired option, then press OK.
● Each time you press rt, the options change.
Video CD
To clear the on-screen bar
Press PLAY SETUP.
NOTE:
See the corresponding pages for details on each function.
A Disc type
B Current transfer rate (Megabits per second)
C Current title (for DVD)
D Current chapter number (for DVD) or track number
(for other type of discs)
E Time information (੬ pg. 36)
F Playback status
: appears during playback.
/
/
: appears during fast forward/reverse.
: appears during playback in forward slow-
motion/reverse slow-motion.
: appears when paused.
: appears when stopped.
G Select this to change time information. (See 5 in the
H Select this for Repeat Playback. (੬ pg. 36)
(੬ pg. 42, 43)
L Select this to change subtitle language. (੬ pg. 40)
M Select this to change view angle. (੬ pg. 41)
N Select this for Programme Playback. (੬ pg. 39)
O Select this for Random Playback. (੬ pg. 40)
Download from Www.Somanuals.com. All Manuals Search And Download.
36
EN
OPERATIONS ON DVD DECK (cont.)
Repeat Playback
You can repeat playback as you like according to the type of
disc.
DVD VIDEO:
Audio CD:
during playback
during playback or in stop mode
Video CD/SVCD: in stop mode or during playback with PBC
disactivated
When using the on-screen bar
A Access the on-screen bar.
Press PLAY SETUP twice. The on-screen bar appears on
the TV screen.
B Select the menu item.
● The following pop-up window appears under the selected
item.
Press w e to move H to
, then press OK.
Change the time information
You can change the time information in the on-screen bar on the
TV screen and the front display panel of the unit.
C Select the repeat mode.
Press rt repeatedly to select the Repeat mode, then
press OK.
During playback or while stopped
● The mode changes as follows:
A Access the on-screen bar.
the TV screen.
DVD VIDEO
Press PLAY SETUP twice. The on-screen bar appears on
CHAPTER: The current chapter is played back repeatedly.
TITLE:
A-B:
The current title is played back repeatedly.
B Select the menu item.
● Each time you press OK, the time information changes as
follows;
The desired part is played back repeatedly.
(੬ pg. 37)
Press w e to move H to
, then press OK.
Each title and chapter is played back once.
OFF:
Video CD/SVCD/CD
Example: During DVD playback
The current track is played back repeatedly.
All tracks are played back repeatedly.
TRACK:
ALL:
(Back to the beginning)
TIME:
Elapsed playing time of current chapter/track
Remaining time of current chapter/track
Elapsed time of title/disc
A-B:
The desired part is played back repeatedly.
(੬ pg. 37)
REM:
Each track is played back once.
OFF:
TOTAL:
T. REM:
● “A-B” cannot be selected while stopped.
Remaining time of title/disc
To clear the on-screen bar
Press PLAY SETUP.
NOTES:
● While playing a Video CD, Audio CD or SVCD, the hour digit
indication does not appear.
● While a DVD is stopped, “– – : – –” appears in the time
information display.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
37
To clear the on-screen bar
Press PLAY SETUP.
To cancel Repeat Playback
Repeat from step A, select “OFF” in step C, then press
OK.
Press OK at the end of the part you want to repeat (point B).
● A-B Repeat Playback starts. The selected part of the disc
(between point A and B) is played repeatedly.
When using the REPEAT button:
To cancel A-B Repeat Playback
Repeat from step A, select “OFF” in step C, then press
OK.
A Access the repeat mode.
● You can also cancel Repeat Playback by pressing 2 or 6.
Press REPEAT during playback of the item you want to
repeat.
To clear the on-screen bar
Press PLAY SETUP.
● Repeat mode is displayed on the TV.
NOTES:
● A-B Repeat Playback may not work properly depending on the
type of disc being used.
B Select the repeat mode.
● The subtitles recorded around point A-B may not appear.
● The end of the item will be set as the “B” point if the end of the
item reached before you set the “B” point.
● When playing back a DVD, A-B Repeat Playback is possible
only within the same title.
● “A-B” cannot be selected during Programme and Random
Playback.
● “A-B” cannot be selected while stopped.
Press REPEAT repeatedly to select the desired repeat
mode, then press OK.
● To stop Repeat Playback, press 8.
● To cancel Repeat Playback, press REPEAT repeatedly until
“OFF” appears on the TV screen, then press OK.
NOTES:
● Repeat Playback is not possible with a Video CD and SVCD
with PBC function.
● Repeat Playback may not work properly depending on the
type of disc being used.
● You cannot select A-B Repeat Playback by pressing REPEAT.
A-B Repeat Playback
You can repeat the desired part.
A Access the on-screen bar.
Press PLAY SETUP twice. The on-screen bar appears on
the TV screen.
B Select the menu item.
● The following pop-up window appears under the selected
item.
Press w e to move H to
, then press OK.
C Select the repeat mode.
Press rt repeatedly to select “A-B”.
D Select the start point.
Press OK at the beginning of the part you want to repeat
(point A).
● The following display appears in the on-screen bar.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
EN
OPERATIONS ON DVD DECK (cont.)
Example:
To play back from a point 2 (hours): 34 (minutes): 08 (seconds)
elapsed
TIME _ : _ _ : _ _
TIME 2 : 3 _ : _ _
TIME 2 : 3 4 : 0 _
TIME 2 : _ _ : _ _
Press 3
Press 2
Press 4
Press 8
TIME 2 : 3 4 : _ _
Press 0
TIME 2 :3 4 :0 8
If you have specified a wrong selection,
Press w repeatedly until the wrong number is erased,
then press number keys to enter the correct numbers.
● The unit starts playback from the specified time.
To clear the on-screen bar
Press PLAY SETUP.
NOTES:
● When “X” is displayed on the TV screen in step C, you have
selected a point that exceeds the recording time of the disc.
● Some DVD VIDEO discs do not contain time information, and
it is not possible to use the Time Search function. In such a
case, “X” is displayed on the TV screen as well.
● Time Search does not work while you play back the Video CD
or SVCD with the PBC Function.
Time Search
Reactivate the Playback Control (PBC) Function
You can reactivate the PBC function when you play back a PBC-
compatible Video CD disc without PBC function.
● Press TOP MENU during playback.
You can play back a disc from the desired point by specifying the
elapsed time from the beginning of the current title (for DVD
VIDEO) or the disc (for Audio CD/Video CD) using the Time
Search.
When a PBC-compatible Video CD is played back, be sure to
inactivate PBC function before you perform Time search by
pressing the number keys instead of the 4 button when you start
playback.
Chapter Search
You can start playback the desired chapter using the on-screen
bar.
A Access the on-screen bar.
the TV screen.
Press PLAY SETUP twice. The on-screen bar appears on
A Access the on-screen bar.
Press PLAY SETUP twice. The on-screen bar appears on
the TV screen.
B Select the menu item.
● The following pop-up window appears under the selected
item.
Press w e to move H to
, then press OK.
B Select the menu item.
● The following pop-up window appears under the selected
item.
Press w e to move H to
, then press OK.
C Select the time.
Press the number keys (0-9) to enter the time, then press
OK.
C Select the chapter.
Press the number keys (0-10) to enter the desired chapter
number, then press OK.
● The unit starts playback from the selected chapter.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
39
D Start playback.
Examples:
To select track 5, press the number key “5”.
To select track 15, press the number key “1” and “5”.
To select track 25, press number key “2” and “5”.
● It is not possible to use the number key “+10”.
Press 4. Playback starts in the selected order.
● When all of the programmed tracks have been played back,
Programme Playback stops, but the programmed information
remains.
● To stop Programme Playback, press 8.
If you have specified a wrong selection
Enter the appropriate number keys again.
● To clear all the programmed tracks, press 8 to stop playback
and press PLAY SETUP to clear the programme table, then
press 8 again.
To clear the on-screen bar
Press PLAY SETUP.
● During Programme Playback, pressing 6 skips to the next
selection of the programme. Pressing 2 returns to the
beginning of the current selection.
NOTES:
● When “X” is displayed on the TV screen in step C, the
chapter you have selected is not contained in the disc, or
chapter search does not work on the disc.
To clear the programme table
Press PLAY SETUP.
● Chapter Search starts automatically when you select the
desired chapter in step C depending on the disc.
NOTE:
Programme Playback may not be possible depending on the type
of disc.
Programme Playback
You can play back up to 99 tracks in the desired order.
A Access the on-screen bar.
Press PLAY SETUP twice in stop mode.
B Select the menu item.
Press w e to move H to
, then press OK.
● The programme table appears under the on-screen bar.
C Select the tracks in the desired order.
Press the appropriate
number keys to select the
tracks.
Programme time
Examples:
● To select track 5, press the number key “5”.
● To select track 15, press the number key “+10” and “5”.
● To select track 25, press number key “+10” twice, then
“5”.
If you have specified a wrong selection
Press 8. The last selection programmed is erased.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
EN
OPERATIONS ON DVD DECK (cont.)
Subtitle Selection
You can select subtitle language.
● During playback
When using the on-screen bar
A Access the on-screen bar.
Press PLAY SETUP twice. The on-screen bar appears on
the TV screen.
B Select the menu item.
● The following pop-up window appears under the selected
item.
Press w e to move H to
, then press OK.
Example (DVD):“ENGLISH” is selected out of 3 subtitle
languages recorded.
Random Playback
C Select the subtitle language.
You can play back all the tracks on the disc in random order.
Press rt repeatedly to select the desired subtitle
language, then press OK.
A Access the on-screen bar.
● Each time you press the button, the subtitle language changes.
Press PLAY SETUP twice in stop mode.
Press PLAY SETUP.
B Select the menu item.
● Playback starts in random order.
NOTES:
Press w e to move H to
, then press OK.
● For DVD VIDEO
Some subtitle languages are abbreviated in the pop-up
window. See “Language Code List” (੬ pg. 17).
● For SVCD
SVCD can contain up to four subtitles. Pressing SUB TITLE
changes the subtitles regardless of whether the subtitles are
recorded or not. (Subtitles will not change if no subtitle is
recorded.)
● When “X” appears on the TV screen in step C, subtitle
language is not recorded.
● To stop and quit Random Playback, press 8.
● To cancel Random playback, repeat step B during Random
Playback. Normal playback resumes at the current point.
To clear the on-screen bar
Press PLAY SETUP.
When using the SUB TITLE button:
NOTES:
● The same track will not be played back more than once during
Random Playback.
A Access the menu.
● Random playback is canceled when all the tracks have been
played back.
Press SUB TITLE.
● The following pop-up window appears on the TV screen.
Example (DVD):“ENGLISH” is selected out of 3 subtitle
languages recorded.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
41
When using the ANGLE button:
B Select the subtitle language.
A Access the menu.
Press rt or SUB TITLE repeatedly to select the desired
subtitle language, then press OK.
Press ANGLE.
● Each time you press the button, the subtitle language changes.
● The pop-up window disappears if no operation is done for
about 5 seconds.
● The following pop-up window appears on the TV screen.
Example:The first view angle is selected out of 3 view angles
recorded.
NOTE:
When “X” appears on the TV screen in step B, subtitle language
is not recorded.
Angle Selection
B Select the view angle.
You can enjoy a variety of scene angles if the DVD VIDEO disc
contains “multi-angle” parts, where multiple cameras were used
to shoot the same scene from different angles.
Press rt or ANGLE repeatedly to select the desired
view angle, then press OK.
● Each time you press the button, the angle of the scene
changes.
● The pop-up window disappears if no operation is done for
about 5 seconds.
If the disc contains “multi-angle” parts, “
” appears on the TV
screen at the beginning of the “multi-angle” part when “ON
SCREEN GUIDE” is set to “ON”.
● During playback
Example:
When using the on-screen bar
1/3]2/3]3/3](Back to the beginning)
1/3
1/3
1
2
A Access the on-screen bar.
Press PLAY SETUP twice. The on-screen bar appears on
the TV screen.
1/3
3
B Select the menu item.
● The following pop-up window appears under the selected
item.
Press w e to move H to
, then press OK.
Example: The first view angle is selected out of 3 view angles
recorded.
C Select the view angle.
Press rt repeatedly to select the desired view angle,
then press OK.
● Each time you press the button, the angle of the scene
changes.
To clear the on-screen bar
Press PLAY SETUP.
NOTE:
When “X” appears on the TV screen in step C, the current
scene is not recorded from multiple angles.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
EN
OPERATIONS ON DVD DECK (cont.)
C Select the audio language.
Press rt repeatedly to select the desired audio
language, then press OK.
● Each time you press the button, the audio language changes.
To clear the on-screen bar
Press PLAY SETUP.
NOTES:
● Some audio languages are abbreviated in the pop-up window.
See “Language Code List” (੬ pg. 17).
● If “X” appears on the TV, the current scene does not contain
plural audio languages.
When using the A.MONITOR button:
A Access the menu.
Press A.MONITOR.
● The following pop-up window appears on the TV screen.
Example: “ENGLISH” is selected out of 3 audio languages
recorded.
Audio Language Selection
Some DVD discs contain multiple audio.
You can select the audio language of movies (DVD VIDEO).
● During playback
B Select the audio language.
Press rt or A.MONITOR repeatedly to select the
desired audio language, then press OK.
● The pop-up window disappears if no operation is done for
about 5 seconds.
When using the on-screen bar
A Access the on-screen bar.
Press PLAY SETUP twice. The on-screen bar appears on
NOTE:
Some audio languages are abbreviated in the pop-up window.
See “Language Code List” (੬ pg. 17).
the TV screen.
B Select the menu item.
● The following pop-up window appears under the selected
item.
Press w e to move H to
, then press OK.
Example:“ENGLISH” is selected out of 4 audio languages
recorded.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
43
When using the A.MONITOR button:
Audio Channel Selection
A Access the menu.
● The following pop-up window appears on the TV screen.
Example:“ST” (stereo) is selected out of 3 audio channels
recorded.
Press A.MONITOR.
When you play certain karaoke (DVD/Video CD/SVCD), you can
enjoy karaoke by selecting the audio channel to play.
● The sound of each audio channel depends on the contents of
the disc.
● During playback
When using the on-screen bar
A Access the on-screen bar.
Press PLAY SETUP twice. The on-screen bar appears on
the TV screen.
B Select the audio channel.
Press rt or A.MONITOR repeatedly to select the
desired audio channel, then press OK.
B Select the menu item.
● Each time you press the button, the audio channel changes.
● The pop-up window disappears if no operation is done for
about 5 seconds.
Press w e to move H to
, then press OK.
● The following pop-up window appears under the selected
item.
Example:“ST” (stereo) is selected out of 3 audio channels
recorded.
For Video CD
ST]L]R](Back to the beginning)
To listen to normal stereo playback.
To listen to L (left) audio channel only.
To listen to R (right) audio channel only.
ST:
L:
R:
C Select the audio channel.
For SVCD
ST 1]ST 2]L 1]R 1]L 2]R 2](Back to the beginning)
Press rt repeatedly to select the desired audio channel,
then press OK.
To listen to normal stereo playback of ST 1 or
ST 2 channel.
ST 1/ST 2:
● Each time you press the button, the audio channel changes.
To clear the on-screen bar
Press PLAY SETUP.
To listen to the L (left) 1 or 2 audio channel.
To listen to the R (right) 1 or 2 audio channel.
L 1/L 2:
R 1/R 2:
Download from Www.Somanuals.com. All Manuals Search And Download.
44
EN
OPERATIONS ON DVD DECK (cont.)
D Access the “PARENTAL LOCK“ menu.
Parental Lock
This function restricts playback of DVD VIDEO discs which
contain violent (and other) scenes according to the level set by
the user. For example, if a movie which includes violent scenes
supports the parental lock feature, such scenes which you do not
want to let children view can be cut or replaced with other
scenes.
Press rt repeatedly to move
H to “PARENTAL LOCK“, then
press OK.
● The “PARENTAL LOCK“ sub-
menu appears on the TV screen.
● It is possible to access the
“PARENTAL LOCK“ menu only
in the stop mode when a DVD
disc is loaded on the unit.
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
E Access the country code menu.
PARENTAL LOCK
Press rt repeatedly to
move H to “COUNTRY
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
GB
NONE
CODE“, then press OK.
_
_
_
_
SELECT
OK
USE
TO SELECT. USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP MENU].
F Select the country code.
Press rt repeatedly to
move H to select the country
code, then press OK.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
GB
FR
FX
NONE
GA
GB
GD
GE
GF
_
_
_
_
● See “Country/Area Code List
for Parental Lock” (੬ pg. 46).
● The H moves to “SET LEVEL”.
SELECT
OK
USE
TO SELECT. USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP MENU].
G Select the Level.
Press OK, then press rt
repeatedly to move H to select
the level of restriction, then
press OK.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
GB
NONE
NONE
_
_
_
_
8
7
6
5
4
3
● The H moves to “PASSWORD”.
● The smaller the value of level is,
the more restrictive the Parental
Lock level is.
To set Parental Lock for the first time
SELECT
OK
USE
TO SELECT. USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP MENU].
A Turn on the unit.
● Select “NONE” to cancel this function.
Press 1.
H Enter the password.
Press the number keys to
B Select the DVD deck.
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
PARENTAL LOCK
COUNTRY CODE
enter a 4-digit number as
your password, then press
OK.
GB
4
SET LEVEL
PASSWORD
EXIT
On the unit
_
_
_
_
● The H moves to “EXIT”.
SELECT
OK
NEW PASSWORD
TO EXIT, PRESS [SET UP MENU].
?
••• PRESS
0
~
9
KEY
On the remote control
Press DVD so that the DVD indicator lights up.
I Return to the OTHERS menu screen.
C Access the DVD Set Up screen menu.
B Press w e to select “ OTHERS”.
Press OK.
A Press SET UP MENU.
● The “ OTHERS” menu resumes.
To return to the normal screen
Press SET UP MENU.
NOTE:
Remember your password, or make a note of it.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
45
To change the settings
To temporarily release the Parental
Lock
You can change the Parental lock settings later.
When you set the parental level strictly, some discs may not be
played back at all. When you insert such a disc and try to play it
back, the following Parental Lock screen appears on the TV
screen, asking you whether you want the Parental Lock to be
temporarily released or not.
A Access the Parental Lock screen.
A Press SET UP MENU.
B Press w e to select “ OTHERS”.
C Press rt repeatedly to move H to “PARENTAL
LOCK“, then press OK.
A Access the password screen.
● The “PARENTAL LOCK“ sub-menu appears on the TV screen.
● You can only move H to “PASSWORD” or to “EXIT” before
you enter your password.
A Place the disc in the disc
PARENTAL LOCK
tray.
TEMPORARY RELEASE
NOT RELEASE
● If the disc rated higher than the
selected set level, the
_
_
_
_
PASSWORD
B Enter the password.
following screen appears.
B Press rt to move H to
“TEMPORARY RELEASE”,
then press OK.
● If you select “NOT RELEASE”,
you cannot play back that disc.
SELECT
OK
PASSWORD? ••• PRESS
0
~
9
KEY
Press the appropriate number
PARENTAL LOCK
keys to enter a 4-digit
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
GB
4
password, then press OK.
If you enter the wrong
password, “WRONG!
_
_
_
_
SELECT
OK
NEW PASSWORD
TO EXIT, PRESS [SET UP MENU].
?
••• PRESS
0
~
9
KEY
RETRY...” appears at the
bottom of the TV screen.
Enter the correct password.
B Enter the password.
Press the appropriate number keys to enter a 4-digit
password, then press OK.
C Change the country code.
● If you enter the wrong password, “WRONG! RETRY...” appears
on the TV screen. Enter the correct password.
● If you enter the correct password, the Parental lock is released
and the unit starts playback.
Press rt to select the country code, then press OK.
● See “Country/Area Code List for Parental Lock” (੬ pg. 46).
● When you change the country code, you must select the set
level.
NOTES:
● When you enter the wrong password more than 3 times in
step B above, the arrow moves to “NOT RELEASE”
automatically and rt do not work. In such a case, press OK,
then press x to remove the disc.
D Change the set level.
Press rt to select the desired level, then press OK.
● If you forget your password, enter “8888” in step B.
Press the appropriate number keys to enter a 4-digit
password, then press OK.
● The password entered in this step becomes the new password.
If you do not change the password, enter the same password
as in the step B.
● Even if you want to change only the country code and/or set
level, do not forget to enter the password after changing the
country code and/or the set level. Otherwise, the new country
code and/or the set level will not become effective.
Press SET UP MENU.
NOTES:
● When you enter the wrong password more than 3 times in
step B above, the arrow moves to “EXIT” automatically and
rt do not work.
● If you forget your password, enter “8888” in step B.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
EN
OPERATIONS ON DVD DECK (cont.)
Country/Area Code List for Parental Lock
AD
AE
Andorra
ES
Spain
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
ET
Ethiopia
AF
FI
FJ
FK
Finland
Fiji
Falkland Islands (Malvinas)
AG
AI
AL
Albania
Armenia
Netherlands Antilles
Angola
Antarctica
Argentina
American Samoa
Austria
Australia
Aruba
Azerbaijan
Bosnia and Herzegovina
Barbados
Bangladesh
Belgium
FM
FO
FR
Micronesia (Federated States of)
AM
AN
AO
AQ
AR
AS
Faroe Islands
France
France, Metropolitan
Gabon
United Kingdom
Grenada
Georgia
French Guiana
FX
GA
GB
GD
GE
GF
GH
GI
AT
AU
AW
AZ
BA
BB
BD
BE
Ghana
Gibraltar
Greenland
Gambia
Guinea
Guadeloupe
Equatorial Guinea
Greece
South Georgia and the South Sandwich Islands
Guatemala
Guam
Guinea-Bissau
Guyana
Hong Kong
Heard Island and McDonald Islands
Honduras
Croatia
Haiti
Hungary
GL
GM
GN
GP
GQ
GR
GS
GT
GU
GW
GY
HK
HM
HN
HR
HT
HU
ID
IE
IL
IN
IO
IQ
IR
IS
IT
JM
JO
JP
KE
KG
KH
KI
BF
Burkina Faso
Bulgaria
BG
BH
BI
Bahrain
Burundi
BJ
Benin
BM
BN
BO
BR
BS
Bermuda
Brunei Darussalam
Bolivia
Brazil
Bahamas
BT
Bhutan
BV
BW
BY
BZ
CA
CC
CF
Bouvet Island
Botswana
Belarus
Indonesia
Ireland
Israel
India
Belize
Canada
Cocos (Keeling) Islands
Central African Republic
Congo
British Indian Ocean Territory
CG
CH
CI
CK
CL
CM
CN
CO
CR
CU
CV
CX
CY
CZ
DE
DJ
Iraq
Switzerland
Côte d’Ivoire
Cook Islands
Chile
Cameroon
China
Colombia
Costa Rica
Cuba
Cape Verde
Christmas Island
Cyprus
Czech Republic
Germany
Djibouti
Denmark
Dominica
Dominican Republic
Algeria
Iran (Islamic Republic of)
Iceland
Italy
Jamaica
Jordan
Japan
Kenya
Kyrgyzstan
Cambodia
Kiribati
Comoros
KM
KN
KP
KR
KW
KY
KZ
LA
LB
Saint Kitts and Nevis
Korea, Democratic People’s Republic of
Korea, Republic of
Kuwait
Cayman Islands
Kazakhstan
DK
DM
DO
DZ
EC
Lao People’s Democratic Republic
Lebanon
Ecuador
Estonia
Egypt
Western Sahara
Eritrea
EE
EG
EH
ER
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
47
LC
Saint Lucia
Liechtenstein
Sri Lanka
SA
SB
SC
SD
SE
Saudi Arabia
Solomon Islands
Seychelles
LI
LK
LR
LS
LT
LU
LV
LY
Liberia
Sudan
Lesotho
Lithuania
Luxembourg
Latvia
Libyan Arab Jamahiriya
Morocco
Monaco
Moldova, Republic of
Madagascar
Marshall Islands
Mali
Myanmar
Mongolia
Macau
Northern Mariana Islands
Martinique
Mauritania
Montserrat
Malta
Mauritius
Maldives
Malawi
Mexico
Malaysia
Mozambique
Namibia
New Caledonia
Niger
Norfolk Island
Nigeria
Sweden
Singapore
Saint Helena
Slovenia
Svalbard and Jan Mayen
Slovakia
Sierra Leone
San Marino
Senegal
Somalia
Suriname
Sao Tome and Principe
El Salvador
Syrian Arab Republic
Swaziland
Turks and Caicos Islands
Chad
SG
SH
SI
SJ
MA
MC
MD
MG
MH
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
MW
MX
MY
MZ
NA
NC
NE
NF
NG
NI
SK
SL
SM
SN
SO
SR
ST
SV
SY
SZ
TC
TD
TF
French Southern Territories
Togo
TG
TH
TJ
TK
TM
TN
TO
TP
Thailand
Tajikistan
Tokelau
Turkmenistan
Tunisia
Tonga
East Timor
TR
TT
Turkey
Trinidad and Tobago
Tuvalu
TV
TW
TZ
UA
UG
UM
US
UY
UZ
VA
VC
VE
VG
VI
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Taiwan, Province of China
Tanzania, United Republic of
Ukraine
Nicaragua
Netherlands
Norway
NL
NO
NP
NR
NU
NZ
OM
PA
Uganda
Nepal
United States Minor Outlying Islands
United States
Uruguay
Nauru
Niue
New Zealand
Oman
Uzbekistan
Vatican City State (Holy See)
Saint Vincent and the Grenadines
Venezuela
Panama
Peru
French Polynesia
Papua New Guinea
Philippines
Pakistan
Poland
Saint Pierre and Miquelon
Pitcairn
Puerto Rico
Portugal
Palau
Paraguay
PE
PF
Virgin Islands (British)
Virgin Islands (U.S.)
Viet Nam
Vanuatu
Wallis and Futuna Islands
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zaire
Zimbabwe
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
Qatar
Réunion
Romania
Russian Federation
Rwanda
Download from Www.Somanuals.com. All Manuals Search And Download.
48
EN
OPERATIONS ON DVD DECK (cont.)
NOTES:
● Because of the disc characteristics or recording condition,
some discs may not be played back or it takes time to start
playback.
About MP3 Disc
This unit can playback CD discs recorded in the MP3 format (we
refer to those discs as MP3 discs in this manual).
● The unit does not support “packet writing” discs.
● If there are any Tracks (files) which are stored on a disc directly
and do not belong to any Group (directory), the unit
recognizes them as belonging to an independent Group.
● The unit plays back Groups/Tracks on an MP3 disc in the
alphabetical order.
● For example, if there are three title Groups [one], [two] and
[three] on a disc, the playback order is [one], [three] then
[two]. Tracks in a Group are played back in the same way.
● Therefore, an MP3 disc on the market may be played back in
different order from the order printed on its sleeve.
Operations for MP3 discs are similar to those for Audio CD
discs, though there are some restrictions and differences.
What is MP3?
MP3 is the abbreviation of “MPEG1 Audio Layer 3”. MPEG
Audio is a compression specification that compresses the audio
portion only. This image compression method is used in DVD or
Video CD, etc. The audio data has been compressed into about
1/10.
On an MP3 disc, each material (song) is recorded on each Track
(file), which usually belongs to a Group (folder).
MP3 control display
Track A.mp3
Group 1
Track B.mp3
The MP3 control display appears on the TV screen and playback
starts when an MP3 disc is loaded.
Track C.mp3
MP3 disc
MP3 CONTROL
Group 2
Track D.mp3
Track E.mp3
Group 4
Track F.mp3
Group 3
This unit can recognize up to 99 Groups and up to 150 Tracks
per Group.
If a disc includes more than the Tracks above limit, the unit stops
detecting Tracks when the number of detected Tracks reaches
the limit and ignores the subsequent Tracks. The unit also
ignores any non-MP3 file on the disc.
A Current group
B Current group number/Total group number on disc
C Current track
D Elapsed playing time of current track
(Elapsed playing time is only shown during playback.)
E Current track number/Total track number in current
group
NOTES for making a private MP3 disc using a CD-R/
CD-RW disc:
● Select “ISO 9660” as the disc format.
● Finalize the disc.
F Total track number on disc
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
49
C Select the mode.
MP3 Playback
Be sure to set “MP3/JPEG” to “MP3” before loading a
disc. (੬ pg. 66)
● You cannot access the DVD Set Up screen and “X” appears
on the TV screen if a disc is already placed.
You can search and play back desired groups and tracks using
the MP3 control display.
D Load the disc.
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
A Press x on the DVD deck to open the disc tray.
B Place the MP3 disc in the disc tray.
● For details, refer to “Placing a Disc” (੬ pg. 5).
C Press x on the DVD deck to close the disc tray.
● The MP3 control display appears on the TV screen when an
MP3 disc is loaded. (੬ pg. 48)
E Select the group.
Press w e to select the desired group.
F Start playback.
Press rt to select the desired track, then press OK or 4.
● You can skip a track across a group. Press 6 to skip to the
first track of the next group when the last track of the current
group is selected.
G Pause playback.
Press 9.
● To resume normal playback, press 4.
H Stop playback.
Press 8. Press x on the DVD deck to open the disc tray,
then remove the disc.
NOTES:
● 4, 8, 9, 2 and 6 buttons function the same as with
Audio CD discs, however, 3 and 5 buttons do not
function for MP3 playback.
● Resume playback, Programme playback or Random playback
also does not function for MP3 playback.
Using the MP3 control display
A Turn on the unit.
Press 1.
B Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the remote control
Press DVD so that the DVD indicator lights up.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
EN
OPERATIONS ON DVD DECK (cont.)
Repeat Playback
You can repeat playback of the current group, track or all groups.
● While MP3 control display is on the TV:
A Access the repeat mode.
Press PLAY SETUP during playback.
● The current repeat mode is displayed on the MP3 control
display.
B Select the mode.
Press rt to select the desired repeat mode, then press
OK.
● Each time you press REPEAT, the mode changes as follows:
TRACK]GROUP]ALL]OFF (No indication)](Back to the
beginning)
The current track is played back
repeatedly.
TRACK:
All tracks of the current group are
played back repeatedly.
GROUP:
All tracks are played back
repeatedly.
ALL:
Each track is played back once.
OFF (No indication):
Group/track selection
● To stop Repeat Playback, press 8.
● To cancel Repeat Playback, press REPEAT repeatedly until the
repeat mode display disappears on the TV screen.
● You can also quit Repeat Playback in the following cases:
• Press x to open the disc tray.
To start playback by specifying the group/track number
A Press TITLE.
B Press the number keys (0-10, +10) to enter the group
• Turn off the unit.
number.
C Press the number keys (0-10, +10) to enter the track
To return to the MP3 control display
Press 8.
number.
Example:
To select 3:
To select 14:
To select 20:
Press 3.
Press +10, then 4.
Press +10, then 10.
Or press +10 twice, then 0.
Press +10, +10, then 4.
To select 24:
To select 110: Press +10 ten times, then 10.
● The entered number appears in the track number indication
and playback starts from the track you have specified.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
51
NOTES:
● We recommend to record a file at 640 x 480 resolution. (If a
file has been recorded at a resolution of more than 640 x 480,
it will take a longer time to be displayed.)
About JPEG Disc
Operations for JPEG discs are similar to those for Audio CD
discs, though there are some restrictions and differences.
This unit can playback CD discs recorded in the JPEG format (we
refer to those discs as JPEG discs in this manual).
● This unit can only play back baseline JPEG files*. Progressive
JPEG files* or lossless JPEG files* cannot be played back.
* Baseline JPEG format: Used for digital cameras, web, etc.
Progressive JPEG format: Used for web.
Lossless JPEG format: An old type and rarely used now.
● Some files on a JPEG disc may be played back distortedly.
● Because of the disc characteristics or recording condition,
some discs may not be played back or it takes time to start
playback.
● The unit does not support “packet writing” discs.
● If there are any Files which are stored on a disc directly and do
not belong to any Group (directory), the unit recognized them
as belonging to an independent Group.
What is JPEG?
JPEG is the abbreviation of “Joint Photographic Expert Group”.
JPEG is a still-picture data compression system.
On a JPEG disc, each still picture is recorded as a file, which
usually belongs to a Group (folder).
File A.jpg
Group 1
File B.jpg
● The unit plays back Groups/Files on a JPEG disc in the
alphabetical order.
● For example, if there are three title Groups [one], [two] and
[three] on a disc, the playback order is [one], [three] then
[two]. Files in a Group are played back in the same way.
● Therefore, a JPEG disc on the market may be played back in
different order from the order printed on its sleeve.
File C.jpg
JPEG disc
Group 2
File D.jpg
File E.jpg
JPEG control display
The JPEG control display appears on the TV screen and playback
starts when a JPEG disc is loaded.
Group 4
File F.jpg
Group 3
This unit can recognize up to 99 Groups and up to 150 Files per
Group.
If a disc includes more than the Files above limit, the unit stops
detecting Files when the number of detected Files reaches the
limit and ignores the subsequent Files. The unit also ignores any
non-JPEG file on the disc.
NOTES for making a private JPEG disc using a CD-R/
CD-RW disc:
● Select “ISO 9660” as the disc format.
● Finalize the disc.
A Current group
B Current group number/Total group number on disc
C Current file
D Current file number/Total file number in current group
E Total file number on disc
Download from Www.Somanuals.com. All Manuals Search And Download.
52
EN
OPERATIONS ON DVD DECK (cont.)
C Select the mode.
JPEG Playback
Be sure to set “MP3/JPEG” to “JPEG” before loading a
disc. (੬ pg. 66)
● You cannot access the DVD Set Up screen and “X” appears
on the TV screen if a disc is already placed.
You can search and play back desired groups and files using the
JPEG control display.
D Load the disc.
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
A Press x on the DVD deck to open the disc tray.
B Place the JPEG disc in the disc tray.
● For details, refer to “Placing a Disc” (੬ pg. 5).
C Press x on the DVD deck to close the disc tray.
● The JPEG control display appears on the TV screen when a
JPEG disc is loaded. (੬ pg. 51)
E Select the group.
Press w e to select the desired group.
F Start playback.
Press rt to select the desired file, then press OK or 4.
● You can skip a file across a group. Press 6 to skip to the first
file of the next group when the last file of the current group is
selected.
The slide-show playback starts from the selected file.
● After selecting a file, press 4 to starts slide-show playback
from the selected file, or press OK to show the selected file.
G Pause playback.
Press 9.
● To resume normal playback, press 4.
H Stop playback.
Press 8. Press x on the DVD deck to open the disc tray,
then remove the disc.
NOTES:
● 4, 8, 9, 2 and 6 buttons function the same as with
Audio CD discs, however, 3 and 5 buttons do not
function for JPEG playback.
● Resume playback, Programme playback or Random playback
also does not function for JPEG playback.
Using the JPEG control display
A Turn on the unit.
Press 1.
B Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the remote control
Press DVD so that the DVD indicator lights up.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
53
Repeat Playback
You can repeat playback of the current group, file or all groups.
● While JPEG control display is on the TV:
A Access the repeat mode.
Press PLAY SETUP while the JPEG Control screen is
displayed.
● The current repeat mode is displayed on the JPEG control
display.
B Select the mode.
Press rt to select the desired repeat mode, then press
OK.
● Each time you press REPEAT, the mode changes as follows:
GROUP]ALL]OFF (No indication)](Back to the beginning)
All files of the current group are
played back repeatedly.
GROUP:
All files are played back
repeatedly.
ALL:
Each file is played back once.
OFF (No indication):
C Start playback.
Group/file selection
Press 4.
● To stop Repeat Playback, press 8.
To start slide-show playback by specifying the group/file
● To cancel Repeat Playback, press REPEAT repeatedly until the
repeat mode display disappears on the TV screen.
● You can also quit Repeat Playback in the following cases:
• Press x to open the disc tray.
number
A Press TITLE.
B Press the number keys (0-10, +10) to enter the group
• Turn off the unit.
number.
C Press the number keys (0-10, +10) to enter the file
To return to the JPEG control display
Press 8.
number.
Example:
To select 3:
To select 14:
To select 20:
Press 3.
Press +10, then 4.
Press +10, then 10.
Or press +10 twice, then 0.
Press +10, +10, then 4.
Zooming
Press ZOOM during playback.
To select 24:
● When you want to zoom the picture during slide-show
playback, first press 9, then press ZOOM.
● For details, refer to “Zooming” (੬ pg. 33).
To select 110: Press +10 ten times, then 10.
● The slide-show playback starts from the file you have
specified.
● To display only the selected file, then press OK. To start slide-
show playback from that file, press OK again.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
EN
EDITING (VHS DECK)
A Make connections.
Edit From A Camcorder
You can use a camcorder as the source player and your
unit as the recording deck.
Connect the camcorder’s AUDIO OUT and VIDEO OUT
connectors to the unit’s front panel AUDIO and VIDEO
input connectors.
Slide the TV/VCR/DVD switch to the right.
● When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your unit.
● When a Master Edit Control-equipped JVC camcorder is used,
the camcorder is capable of controlling the unit. Refer to the
camcorder’s instruction manual for operating procedure.
Recorder
B Select the VHS deck.
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the unit
To PAUSE
connector
AUDIO input
On the remote control
Audio cable (not provided)
Video cable (not provided)
Press VCR so that the VCR indicator lights up.
Mini-plug cable
(not provided)
(JVC camcorder
only)
C Set the unit’s input mode.
VIDEO input
Press AUX (number key “0”) and/or PR to select “F-1”.
VIDEO OUT
AUDIO OUT
D Set the edit mode.
See “PICTURE CONTROL” on page 63.
EDIT
Player
E Engage the Record Pause mode.
Use 4, 3, or 5 to locate the point where you start
recording, then press and hold 9 and press 7 to engage
the Record Pause mode.
F Start the camcorder.
Engage the Play mode of the camcorder.
G Start the unit.
Press 4 to engage the Record mode of the unit.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select “EDIT” to dub tapes in step D, be sure to
select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
55
B Select the VHS deck.
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
Edit To Or From Another
Video Recorder
On the unit
You can use your unit as the source player or as the
recording deck.
On the remote control
Press VCR so that the VCR indicator lights up.
A When using your unit as the source player:
Player
Your unit
TV
C Set the input mode of recording deck.
With this unit, press AUX (number key “0”) and/or PR to
the L-2 IN/DECODER connector, depending on the
connector being used.
● When using another recorder as the recording deck, refer to its
instruction manual.
AV mode
21-pin SCART cable
(not provided)
SELECT” to “A/V”. (੬ pg. 64)
Another recorder
D Set the edit mode.
Recorder
See “PICTURE CONTROL” on page 63.
B When using your unit as the recording deck:
TV
Recorder
Engage the Record Pause mode of the
recording deck.
E
Your unit
Locate the point where you start recording, then engage
the Record Pause mode.
AV mode
F Start the source player.
Engage the Play mode of the source player.
21-pin SCART cable
(not provided)
G Start the recording deck.
Another recorder
Engage the Record mode of the recording deck.
Player
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select “EDIT” to dub tapes in step D, be sure to
select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.
Slide the TV/VCR/DVD switch to the right.
● When you use this unit as the source player for editing, be sure
to set “O.S.D.” to “OFF” before starting. (੬ pg. 63)
A Make connections.
Connect the player’s 21-pin SCART connector to the
unit’s 21-pin SCART connector as illustrated.
A When using your unit as the source player:
— connect its L-1 IN/OUT connector to the recording
deck.
B When using your unit as the recording deck:
— connect its L-1 IN/OUT or L-2 IN/DECODER
connector to the source player.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
EN
EDITING (VHS DECK) (cont.)
C Prepare the DVD deck for dubbing.
B Start playback and search for the point where you
want to start dubbing by pressing 4, 5 or 3.
Dubbing
A Press DVD.
(from DVD to VHS)
You can dub selected scenes from the DVD disc to a cassette,
starting and stopping wherever you wish.
However, it is not possible to dub copy-protected discs.
In such case, “ERROR” appears on the front display panel.
D Start dubbing.
A little before the dubbing start point, press and hold 7,
then press 4 on the remote control.
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
● “DUB” lights on the front display panel.
E End dubbing.
Press 8.
● Be sure to press 8 while the VCR indicator lights up on the
unit.
stopped, but the opening screen is also recorded.
● When you have finished dubbing, press DVD to select the
DVD deck and press 8 to stop playback.
NOTES:
● Set “ON SCREEN GUIDE” to “OFF” (੬ pg. 67) if you do not
want to record the on-screen display for DVD discs during
dubbing.
● There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
● The superimposed indication during the operation or dubbing
is not recorded.
● Set “PICTURE CONTROL” to “EDIT”. (੬ pg. 63)
A Load a cassette and place a disc.
For the VHS deck
Insert a cassette with the record safety tab intact.
For the DVD deck
A Press x on the DVD deck to open the disc tray.
B Place the disc in the disc tray.
C Press x on the DVD deck to close the disc tray.
B Prepare the VHS deck for dubbing.
A Press VCR.
B Press p to select recording speed.
C Search for the point where you want to start dubbing
by pressing 4, 5 or 3 then press 8.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
57
EDITING (DVD DECK)
You can dub selected audio from the DVD or Audio CD disc to
an MD etc.
However, it is not possible to dub copy-protected discs.
Digital Audio Dubbing
Example: Dubbing to an MD
● Turn on the TV and select the video channel (or AV
mode).
A Make connections.
● Slide the TV/VCR/DVD switch to the right.
Connect the optical cable between the unit and the
digital audio device.
Recorder
B Place a disc and load an MD.
For the DVD deck
Digital audio device
(MD deck etc.)
A Press x on the DVD deck to open the disc tray.
B Place the disc in the disc tray.
C Press x on the DVD deck to close the disc tray.
For the digital audio device
Insert an MD.
Optical cable
(not provided)
C Prepare the DVD deck for dubbing.
A Press DVD and select the audio to be dubbed.
B Search for the point where you want to start dubbing
by pressing 4, 5 or 3 then press 8.
C Press 3 a little, then press 4 to start playback.
D Press 9 to pause playback a little before the start
point.
DIGITAL AUDIO OUT
Player
D Prepare the audio device for dubbing.
Select the input mode.
Note for connection:
Remove the connector cover from
the unit and remove the protection
cap from the cable.
E Start dubbing.
A Press 4 to start playback on the DVD deck.
B Start recording on the audio device.
F End dubbing.
Stop recording on the audio device. Then press 8 to stop
playback on the DVD deck.
NOTES:
● There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
● You can also dub audio from a Video CD or SVCD. Set
“DIGITAL AUDIO OUTPUT” to “PCM ONLY”. (੬ pg. 66)
Download from Www.Somanuals.com. All Manuals Search And Download.
58
EN
REMOTE CONTROL
On the remote control
Keep pressing VCR down during steps A – B.
Remote Control Functions
A Change the remote control code.
Remote A/B/C/D Code Switching
Press the number key “1” for A, “2” for B, “3” for C or
“4” for D.
The remote control is capable of controlling four JVC video units
independently. Each of the units can respond to one of four
codes (A, B, C or D). The remote control is preset to send A code
signals because your unit is initially set to respond to A code
signals. You can easily modify your unit to respond to B, C or D
code signals.
B Set the remote control code.
Press OK to set the code.
On the unit
Before performing the following steps:
Slide the TV/VCR/DVD switch to the right.
C Turn off the unit.
Press 1.
D Display the code.
Press 4 on the unit for over 5 seconds while the unit is
turned off. The code currently set appears on the front
display panel.
● If the code displayed on the front display panel is different
from the code set on the remote control, go to step E.
E Change the unit’s code.
Press 8 on the remote control. The code currently set on
the remote control will be applied to the unit.
NOTE:
When “POWER SAVE” is set to “ON” (੬ pg. 64), it is
impossible to change the remote code.
Download from Www.Somanuals.com. All Manuals Search And Download.
59
TV Multi-Brand Remote Control
A Set the TV brand code.
Enter your TV’s brand code using the number keys, then
press OK.
Press 1 on the unit’s remote control to turn on the TV
and try operations (੬ step B).
● Once you have set the remote control to operate the TV, you
do not have to repeat this step until you replace your remote
control’s batteries.
Your remote control can operate the basic functions of your TV
set. In addition to JVC TVs, other manufacturer’s TVs can also be
controlled.
Keep pressing VCR down during step A.
Before performing the following steps:
● Turn off the TV using its remote control.
● Slide the TV/VCR/DVD switch to the left.
● Some brands of TVs have more than one code. If the TV does
not function with one code, try entering another.
B Operate the TV.
Press the corresponding button: 1, TV/VCR, TV/VCR
PR +/–, TV %+/– (Volume), ^ (TV Muting), number
keys.
● For some brands of TVs, you must press OK after having
pressed the number keys.
BRAND NAME
CODE
JVC
01, 23, 24, 25
BLAUPUNKT
BRANDT
FERGUSON
FINLUX
19
26
27
30
FUNAI
32
LG/GOLDSTAR
GRAETZ
GRUNDIG
HITACHI
ITT
18
28
19
10
28
LUXOR
MITSUBISHI
MIVAR
NEC
NOKIA
28
03
IMPORTANT
29
Although the provided remote control unit is compatible with
JVC televisions, as well as many other models, it may not work
with your TV, or in some instances, may have limited function
capability.
20
31
NORDMENDE
PANASONIC
PHILIPS
26
11
02
SABA
26
Control Your TV Using Additional Buttons
SALORA
SAMSUNG
SELECO
28
Use the number keys, and the p button or & button to
select the TV’s channel.
02, 12, 33, 34, 35
28
06
07
26
26
26
14
● With televisions under Code 01, 02, 07, 10, 11, 14, 20, 23,
24, 25, 27, 33 or 35, the p button corresponds to the 1-
digit/2-digit entry switching button (often labelled – /– –) of
your TV’s remote control.
● With televisions under Code 01, 28, 29 or 34, the & button
corresponds to the 10 + button of your TV’s remote
control.
SHARP
SONY
TELEAVIA
TELEFUNKEN
THOMSON
TOSHIBA
NOTE:
The way these buttons are used is determined by your TV.
Use these buttons as instructed for your TV’s remote control.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
EN
SYSTEM CONNECTIONS
Perfect Connections
Connecting To A Satellite
Receiver
This is an example of recommended connections if your
TV has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver’s connector
if you have a decoder, L-1 IN/OUT connector to TV’s
connector, and L-2 IN/DECODER connector to the
satellite receiver’s connector. Then connect the satellite
receiver and TV.
Simple Connections
This is an example of a simple connection if your TV has
one 21-pin AV input (SCART) connector.
Connect the satellite receiver to the L-2 IN/DECODER
connector, then connect the L-1 IN/OUT connector to
the TV’s connector.
Aerial
Outdoor unit
Satellite cable
TV aerial cable
Outdoor unit
Aerial
Satellite receiver
TV aerial cable
Satellite cable
ANTENNA IN
ANTENNA OUT
Satellite receiver
ANTENNA IN
ANTENNA OUT
Decoder
TV
TV
NOTES:
IMPORTANT
● Set “L-2 SELECT” to “A/V”. (੬ pg. 64)
When you set “L-2 SELECT” to “SAT” (੬ pg. 64), it is
possible to view a satellite broadcast with the TV set to its AV
mode even if the unit is turned off. When the unit is in Stop
mode or recording, press TV/VCR on the remote control to
turn off the VCR indicator on the front display panel.
● If you turn on the unit when the satellite receiver’s power is
off, nothing appears on the TV screen. In this case, turn on
the satellite receiver, or set the TV to its TV mode, or press
mode.
● You can use the Automatic Satellite Programme Recording
function (੬ pg. 28) with this connection. (VHS deck only)
● To record a programme via the satellite receiver, select L-2
mode by pressing AUX (number key “0”) and/or PR so that
“L-2” appears on the front display panel. (VHS deck only)
● To receive a scrambled broadcast, descramble the signal with
the decoder connected to the satellite receiver.
● For details, refer to the instruction manual of the satellite
receiver and decoder.
NOTES:
● Set “L-2 SELECT” to “A/V”. (੬ pg. 64)
● You can use the Automatic Satellite Programme Recording
function (੬ pg. 28) with this connection. (VHS deck only)
● To record a programme via the satellite receiver, select L-2
mode by pressing AUX (number key “0”) and/or PR so that
“L-2” appears on the front display panel. (VHS deck only)
● For details, refer to the instruction manual of the satellite
receiver.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
61
Connecting/Using A
Decoder
Connecting To A Dolby
Digital Decoder or An
The L-2 IN/DECODER connector can be used as an input
connector for an external decoder (descrambler). Simply
connect a decoder and you can enjoy the variety of
programming that is available through scrambled
channels.
Amplifier With A Built-in
DTS (DVD deck only)
These instructions enable you to connect your unit to a
Dolby Digital Decoder or an amplifier with built-in DTS.
Decoder
Make connections.
TV aerial
cable
Connect the optical cable between the unit and the
Dolby Digital Decoder or amplifier with a built-in DTS.
L-1 IN/OUT
TV
L-2 IN/DECODER
(provided)
Dolby Digital Decoder or
amplifier with built-in DTS
A Select the input mode.
To DIGITAL AUDIO
input
Set “L-2 SELECT” to “DECODER”. (੬ pg. 64)
Optical cable
(not provided)
B Connect the decoder.
DIGITAL
AUDIO OUT
Connect your unit’s L-2 IN/DECODER connector to the
cable.
C Set the tuner.
Note for connection:
Remove the connector cover from
cap from the cable.
Perform the procedure as described in “When Receiving
A Scrambled Broadcast” on page 70.
NOTES:
● For Dolby Digital sound, set “DIGITAL AUDIO OUTPUT” to
“DOLBY DIGITAL/PCM”. (੬ pg. 66)
● For DTS sound, set “DIGITAL AUDIO OUTPUT” to “STREAM/
PCM”. (੬ pg. 66)
CAUTIONS:
● This unit has a dynamic range of more than 80 dB with regards
to its Hi-Fi audio capability. It is recommended that you check
the maximum level if you are going to listen to the Hi-Fi audio
signals through a stereo amplifier. A sudden surge in the input
level to the speakers may damage them.
● Some speakers and televisions are specially shielded to
prevent television interference. If both are of the non-shielded
type, do not place the speakers adjacent to the TV set as this
can adversely affect the video playback picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
EN
SUBSIDIARY SETTINGS
A Turn on the unit.
Mode Set (VHS deck)
Press 1.
You can change various mode settings on the Mode Set
screen by following the procedure described below.
● For each mode setting, see pages 63 to 64.
B Select the VHS deck.
On the unit
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
C Access the Main Menu screen.
Press SET UP MENU.
D Access the Mode Set screen.
Press rt to move the
highlight bar (pointer) to
“MODE SET”, then press OK
or e.
E Select the mode.
Press rt to move the highlight bar (pointer) to the item
you want to change.
F Select the mode setting.
Press OK or e.
G Return to the normal screen.
Press SET UP MENU.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
63
* The default setting is bold in the table below.
8 AUTO SP]LP TIMER — ON / OFF
8 B.E.S.T. — ON / OFF
When this function is set to “ON”, the unit automatically
You can set the B.E.S.T. (Biconditional Equalised Signal Tracking)
switches to LP mode to allow complete recording if there is not
enough tape to record the entire programme while timer-
recording in SP mode.
system to “ON” or “OFF”. (੬ pg. 23)
NOTES:
For Example:
● When watching a tape recorded with “B.E.S.T.” set to “ON”, it
is recommended that you leave B.E.S.T. on during playback as
well.
Recording a programme of 210 minutes in length onto a 180-
minute tape
Approximately 150 minutes
SP mode
Approximately 60 minutes
LP mode
Total 210 minutes
● When watching a rental tape or one recorded on another
video recorder, or when using this unit as the player for
editing, set B.E.S.T. to your preference.
● The B.E.S.T. system works for both SP and LP modes only after
a tape has been inserted and the Record mode is first initiated.
It does not work during recording.
Make sure you set this function to “ON”, before the timer-
recording starts.
● The B.E.S.T. system does not work while Automatic Satellite
Programme Recording is in progress. (੬ pg. 28)
before recording is initiated.
● Once the cassette is ejected, the B.E.S.T. data is cancelled. The
next time the cassette is used for recording, B.E.S.T. is re-
performed.
NOTES:
● If you have programmed the unit to timer-record 2 or more
programmes, the second programme and those thereafter may
not fit on the tape if you set “AUTO SP]LP TIMER” to “ON”.
In this case, make sure the mode is not engaged, then set the
tape speed manually during timer programming.
● In order to ensure that the recording fits on the tape, this
feature may leave a slight non-recorded section at the end of
the tape.
● Pressing the unit’s 7 button while “BEST” is displayed does
not start Instant Timer Recording. (੬ pg. 22)
● There may be some noise and sound disturbance at the point
on the tape where the unit switches from SP to LP mode.
● The Auto SP]LP Timer feature is not available during ITR
(Instant Timer Recording), and the feature will not work
properly with any tapes longer than E-180, or with some tapes
of shorter lengths.
● If you perform timer recording with both VPS/PDC and the
Auto SP]LP Timer activated, and the programme goes
beyond its originally scheduled length, there may be times
when the programme cannot be recorded in its entirety.
8 PICTURE CONTROL— AUTO / EDIT / SOFT
This feature helps you to adjust the playback picture quality
according to your preference. Normally select “AUTO”.
AUTO: Provides the optimised picture benefits of the B.E.S.T.
Picture System.
EDIT: Minimizes picture degradation during editing (recording
and playback).
SOFT: Reduces image coarseness when viewing overplayed
tapes containing a lot of noise.
NOTES:
● When you select “EDIT” or “SOFT”, the selected mode will
not change until you select another mode.
● When you select “EDIT” to dub tapes, be sure to select
“AUTO” after you finish dubbing the tapes.
automatically from “AUTO” to “NORM”.
8 O.S.D. — ON / OFF
When this function is set to “ON”, various operational indicators
appear on the TV screen. Messages appear in the selected
language. (੬ pg. 10, 15)
NOTES:
● When you use this unit as the source player for editing, be sure
to set “O.S.D.” to “OFF” before starting.
● During playback, the operation mode indicators may be
disturbed depending on the type of tape being used.
8 DIRECT REC — ON / OFF
When this function is set to “ON”, you can easily start recording
7 and press 4 on the remote control, or press 7 on the unit.
NOTES:
● When you use the Direct Rec function, be sure to use a TV
offering T-V LINK, etc. and connect a fully-wired 21-pin
SCART cable between the unit and the TV. (੬ pg. 9)
● If “DIRECT REC” is set to “OFF”, the 7 button functions as
described in “Basic Recording” (੬ pg. 21).
● During Direct Rec, “– –” appears on the front display panel.
● When “DIRECT REC” is set to “ON”, if you press any button
just after pressing 7 on the unit (or 7 and 4 on the remote
control), the unit may not function properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
EN
SUBSIDIARY SETTINGS (cont.)
8 POWER SAVE — ON / OFF
8 COLOUR SYSTEM — PAL/NTSC / MESECAM
You can play back PAL, NTSC and MESECAM tapes, or record
PAL and SECAM* signals on this unit. Select the appropriate
colour system.
consumption while the unit is turned off.
* SECAM signals will be recorded as MESECAM on this unit;
MESECAM is the designation for tapes with SECAM signals that
have been recorded on a MESECAM-compatible PAL video
cassette recorder.
NOTES:
● During Power Save mode:
— the front display panel will be turned off.
— the Just Clock function (੬ pg. 75) does not work.
— the picture may be distorted momentarily when you turn
on/off the unit.
● Power Save does not work when:
— the unit is in the Timer mode.
— the unit’s power is turned off after timer-recording or Instant
Timer Recording.
— the Automatic Satellite Programme Recording mode is
engaged. (੬ pg. 28)
— “L-2 SELECT” is set to “DECODER” or “SAT”. (੬ pg. 64)
PAL/NTSC: To record PAL signals, or play back a PAL or NTSC
tape.
tape.
NOTES:
About NTSC Playback
● Some TVs shrink the picture vertically and place black bars at
the top and bottom of the TV screen. This is not a malfunction
on the part of either the unit or the TV.
8 VIDEO STABILIZER — ON / OFF
● The picture may roll up and down. This can be corrected using
the V-HOLD control found on some TVs. (This cannot be
corrected if the TV does not have a V-HOLD control.)
● The counter and tape remaining time readings will be
incorrect.
● During search, still, or frame-by-frame playback, the picture
will be distorted, and there may be a loss of colour.
● Depending on the type of TV, the top and bottom portions of
superimposed displays may be cut off during NTSC playback.
When this function is set to “ON”, you can automatically correct
vertical vibration in the picture when playing back unstable
recordings made on another recorder.
NOTES:
● When you finish viewing a tape, be sure to set this function to
“OFF”.
● Regardless of the setting, this function has no effect during
recording and during special effects playback.
● The on-screen display may jitter vertically when this function
is set to “ON”.
● To watch recordings with close-caption, set this function to
“OFF”.
8 AUTO POWER OFF — 3H / OFF
When this function is set to “3H”, the unit is turned off
automatically if no operation is done within 3 hours. “AUTO
POWER OFF IN 3 MIN” appears on the screen 3 minutes before
the unit is turned off.
8 L-2 SELECT — A/V / DECODER / SAT
Set “L-2 SELECT” to the appropriate mode depending on the
type of appliance connected to the unit’s L-2 IN/DECODER
connector.
A/V: To use this unit as the recording deck with the player
satellite receiver connected to the L-2 IN/DECODER
connector.
DECODER: To use a decoder connected to the L-2 IN/DECODER
connector.
SAT: To view a satellite programme with the TV set while the
unit is turned off. (੬ pg. 60)
NOTES:
● If you have a satellite receiver or a decoder connected to the
L-2 IN/DECODER connector, be sure to set “L-2 SELECT” back
to the appropriate mode after editing.
●
If you are not connecting a satellite receiver or a decoder to the
L-2 IN/DECODER connector, leave “L-2 SELECT” set to “A/V”.
● When “L-2 SELECT” is set to “SAT”, “SAT” appears on the TV
screen or front display panel instead of “L-2”.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
65
● The procedure shows how to set “RESUME” to “ON”
on the DVD Set Up menu screen as an example.
Mode Set (DVD deck)
screen by following the procedure described below.
● For each mode setting, see pages 66 to 67.
A Turn on the unit.
Press 1.
MENU LANGUAGE (੬ pg. 16)
B Select the DVD deck.
LANGUAGE
SUBTITLE (੬ pg. 16)
ON SCREEN LANGUAGE (੬ pg. 16)
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
MONITOR TYPE (੬ pg. 14)
lights up.
PICTURE SOURCE (੬ pg. 66)
PICTURE
SCREEN SAVER (੬ pg. 66)
MP3/JPEG (੬ pg. 66)
On the remote control
Press DVD so that the DVD indicator lights up.
C Access the DVD Set Up menu screen.
OTHERS
AUDIO
D. RANGE CONTROL (੬ pg. 66)
OUTPUT LEVEL (੬ pg. 66)
A Press SET UP MENU.
B Press w e to select
RESUME
ON
RESUME (੬ pg. 67)
ON SCREEN GUIDE (੬ pg. 67)
PARENTAL LOCK (੬ pg. 44)
ON SCREEN GUIDE
PARENTAL LOCK
ON
“
OTHERS”.
OTHERS
● Each time you press the
button, the setup menus
change as follows;
SELECT
OK
USE
TO SELECT, USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP MENU].
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
LANGUAGE] PICTURE] AUDIO ] OTHERS
](Back to the beginning)
D Select the mode.
Press rt to move H to “RESUME”, then press OK.
E Select the mode setting.
Press rt to select “ON”, then press OK.
F Return to the normal screen.
Press SET UP MENU.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
EN
SUBSIDIARY SETTINGS (cont.)
* The default setting is bold in the table below.
8 ANALOG DOWN MIX — DOLBY SURROUND / STEREO
Set to the appropriate mode according to your audio system
when you play back a DVD VIDEO disc recorded with surround
multichannel audio. This setting affects only the analogue audio
output signal from the AUDIO OUT connectors when playing
back a DVD VIDEO disc recorded with surround multichannel
audio.
DOLBY SURROUND: Select this when you enjoy multichannel
surround audio by connecting the unit’s analogue AUDIO
OUTPUT connectors (DVD) to a surround decoder or an
internal amplifier.
STEREO: Select this when you enjoy conventional 2-channel
stereo audio by connecting the unit’s analogue AUDIO
TV, or when you dub audio of a DVD VIDEO disc recorded
with surround audio to your MD, cassette, etc.
Picture Settings
8 MONITOR TYPE —
16:9 NORMAL / 16:9 AUTO / 4:3 LB / 4:3 PS
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs.
For more details, refer to “Monitor Set (DVD deck)” (੬ pg. 14).
8 PICTURE SOURCE —
VIDEO (NORMAL) / VIDEO (ACTIVE) / FILM / AUTO
You can obtain optimal picture quality by selecting whether the
content on the disc is processed by field (video source) or by
frame (film source).
Normally set to “AUTO”.
VIDEO (NORMAL): Suitable for playing back a video source disc
with relatively a few movements.
NOTE:
VIDEO (ACTIVE): Suitable for playing back a video source disc
The “ANALOG DOWN MIX” function does not work when the
3D Phonic function is activated. (੬ pg. 33)
with relatively a lot of movements.
FILM: Suitable for playing back a film or progressive source disc.
8 D. RANGE CONTROL —
AUTO: Used to play back a disc containing both video and film
source materials. This unit recognizes the picture type (film or
video source) of the current disc according to the disc
information.
● If the playback picture is unclear or noisy, or the oblique lines
of the picture are rough, try to change to other modes.
WIDE RANGE / NORMAL / TV MODE
The dynamic range (the difference between the loudest sound
and the quietest one) can be compressed during playback of a
programme encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in
Dolby Digital format is played back at low or middle volume.
8 SCREEN SAVER — ON / OFF
WIDE RANGE: Select this to inactivate this function when you
The TV screen may be burned out if a static picture is displayed
for a long time. When this function is set to “ON”, the unit
automatically activates the screen saver function if a static
picture, such as an on-screen display or menu is displayed for
over 5 minutes.
enjoy wide dynamic range programme.
NORMAL: Normally select this setting to activate this function.
TV MODE: Select this when you hear the sound through the TV's
speaker(s).
NOTES:
NOTE:
● This function works only when playing back a disc recorded
with Dolby Digital format. The setting is not effective for other
discs.
This function is not available for Audio CDs and MP3 discs.
8 MP3/JPEG — MP3 / JPEG
● This function does not work when the 3D Phonic function is
activated. (੬ pg. 33)
You can select files to play back, when both MP3 files and JPEG
files are recorded on a disc.
MP3: Select this to play back MP3 files.
JPEG: Select this to play back JPEG files.
8 OUTPUT LEVEL — STANDARD / LOW
You can lower the output level of analog audio to accommodate
the unit to the connected A/V equipment.
NOTE:
STANDARD: Normally select this.
LOW: The output level of analog audio is lowered.
You cannot access the DVD Set Up screen and “X” appears on
the TV screen if a disc is already placed.
Audio Settings
8 DIGITAL AUDIO OUTPUT —
PCM ONLY / DOLBY DIGITAL/PCM / STREAM/PCM
Set to the appropriate mode according to the type of the device
connected to DIGITAL AUDIO OUT connector on the rear of
unit.
It is not necessary to set this mode when you connect no device
to the DIGITAL AUDIO OUT connector.
PCM ONLY: Select this when you connect the unit’s DIGITAL
AUDIO OUT connector to the linear PCM digital input
connector of another audio device.
DOLBY DIGITAL/PCM: Select this when you connect the unit’s
DIGITAL AUDIO OUT connector to the digital input
connector of a Dolby Digital decoder or an amplifier with a
built-in Dolby Digital decoder.
STREAM/PCM: Select this when you connect the unit’s DIGITAL
AUDIO OUT connector to the digital input connector of an
amplifier with a built-in DTS, Dolby Digital, or MPEG
multichannel decoder.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
67
Output
Playback discs
STREAM/PCM
DTS bitstream
DOLBY DIGITAL/PCM
PCM ONLY
DVD VIDEO with
48 kHz, 16/20/24 bit linear
PCM
48 kHz, 16 bit linear PCM
DVD VIDEO with DTS
44.1 kHz, 16 bit stereo linear PCM
DVD VIDEO with Dolby
Digital
48 kHz, 16 bit stereo linear
PCM
Dolby Digital bitstream
44.1 kHz, 16 bit stereo linear PCM
44.1 kHz, 16 bit stereo linear PCM
Linear PCM
Audio CD/Video CD
Audio CD with DTS
MP3 disc
DTS bitstream
NOTES:
● The unit is not equipped with the DTS decoding function.
● When you play back a DVD VIDEO or Audio CD disc with
DTS, use a DTS decoder to get correct signals from your
speakers. Never use the unit’s analog output connectors,
which output incorrect signals that may damage your
speakers.
● If you connect the analog outputs and digital outputs
simultaneously, be sure to select the source of the amplifier
correctly, or set the level control of the amplifier connected to
the analog outputs to minimum.
Others Settings
8 RESUME — ON / OFF / DISC RESUME
When this function is set to “ON”, you can use the resume
function. (੬ pg. 32)
ON: You can start playback from the resume point of the placed
disc.
OFF: You cannot use the resume function.
DISC RESUME: The unit retains a memory of the resume points
of the last 30 discs played back, even though they have been
ejected.
NOTE:
This function is not available for Audio CDs and MP3 discs.
8 ON SCREEN GUIDE — ON / OFF
When this function is set to “ON”, the unit can display “on-
screen guide” icons or characters which show the conditions of
the unit or disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
EN
SUBSIDIARY SETTINGS (cont.)
D Access the Auto Channel Set screen.
Tuner Set
Press rt to move the
highlight bar (pointer) to
“AUTO CH SET”, then press
OK or e.
IMPORTANT
Perform the following steps only if —
— Auto Channel Set has not been set correctly by Auto Set
Up or by Preset Download. (੬ pg. 10, 12)
— you have moved to a different area or if a new station
starts broadcasting in your area.
Your unit needs to memorize all necessary stations in channel
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area to call
them up by using the PR buttons without going through any
vacant channels.
E Select your country.
Press rt to move the highlight bar (pointer) to your
country’s name, then press OK or e.
F Select the language.
Press rt to move the highlight bar (pointer) to the
language of your choice.
Press OK twice.
● When you have connected
Link via a fully-wired 21-pin
SCART cable (੬ pg. 9), the
unit automatically performs
the Preset Download and the
T-V LINK screen will appear.
(੬ pg. 12)
Beginning
End
and remains on screen while
the unit searches for
receivable stations.
As Auto Channel Set progresses, the “q” mark on the TV screen
moves from left to right. Wait until the TV screen as shown in
step H appears.
● Turn on the TV and select the video channel (or AV
mode).
H View the Confirmation screen.
● Slide the TV/VCR/DVD switch to the right.
After “SCAN COMPLETED” is
displayed on the TV screen for
about 5 seconds, the
Confirmation screen looking
Auto Channel Set
like the one to the right
appears. The stations your unit
located appear on the
A Turn on the unit.
Confirmation screen —
Press 1.
channel positions (PR),
channels (CH) and station names (ID – ੬ pg. 72). The
blueback screen and the programme currently being
broadcast by the blinking station appear alternately for 8
seconds each. To view the next page, use the rt w e
button on the remote control.
B Select the VHS deck.
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the unit
● The stations located in the selected country appear at the top
of the list.
● The Guide Program numbers will also be set automatically
during Auto Channel Set.
On the remote control
Press VCR so that the VCR indicator lights up.
I Return to the normal screen.
C Access the Main Menu screen.
Press SET UP MENU.
Press SET UP MENU.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
69
● Using the Confirmation screen, you can skip or add channel
positions, enter station names and perform other operations.
Refer to pages 69 – 71 for the procedures.
D Select the band.
band between CH (regular)
and CC (cable), then press e.
● Depending on reception conditions, the stations may not be
stored in order, and the station names may not be stored
correctly.
Press rt to change the
● For information on scrambled broadcasts, refer to page 70.
IMPORTANT
● In certain reception conditions, station names may not be
set properly when you timer-record a TV programme using
the SHOWVIEW system, the unit will record a TV
E Input the channel.
programme of a different station. When programming the
timer using the SHOWVIEW system, be sure to check the
desired channel is selected correctly. (੬ pg. 24,
Press the number keys to input the channel number you
want to store.
“SHOWVIEW® Timer Programming”) (VHS deck only)
● Your unit memorizes all detected stations even if reception
of some of them is poor. You can delete those stations with
an unacceptable picture. (੬ pg. 70, “Delete A Channel”)
● Input “0” before any single number entries.
until “– – – –” (ID setting) begins blinking, then press rt.
then press rt. While tuning, “+” or “–” appears.
● When storing a channel that sends scrambled broadcasts,
press e until “OFF” (Decoder setting) blinks, then press rt to
set “DECODER” to “ON” (“OFF” is the default setting).
● When “L-2 SELECT” is set to “A/V” or “SAT”, the “DECODER”
NOTES:
● Fine tuning is performed automatically during Auto Channel
Set. If you want to perform tuning manually, refer to page 71.
● If you perform Auto Channel Set when the aerial cable is not
connected properly, “SCAN COMPLETED –NO SIGNAL–”
appears on the TV screen in step H. When this happens, make
will take place again.
F Enter new channel information.
● If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels.
Press OK and the Confirmation screen appears.
● Repeat steps C – F as necessary.
● To change positions, see “Change Station Channel Position”
(੬ pg. 70).
in your unit, see “Set Stations (B)” (੬ pg. 71).
Press SET UP MENU.
Manual Channel Set
Store channels that were not stored during Auto Set Up
(੬ pg. 10), Preset Download (੬ pg. 12) or Auto Channel Set
(੬ pg. 68).
ATTENTION
A Access the Main Menu screen.
Guide Program numbers are not set when channels are
stored manually. (੬ pg. 24, “SHOWVIEW® Timer
Programming”)
Press SET UP MENU.
B Access the Confirmation screen.
Press rt to move the highlight bar (pointer) to
“MANUAL CH SET”, then press OK or e. The
Confirmation screen appears.
C Select the channel position.
(Example) To store in position 12.
Press rt w e until an open
position in which you want to
store a channel begins
blinking, then press OK. The
Manual Channel Set screen
appears.
● The blueback screen and the
programme currently being
broadcast by the selected
channel appear alternately for 8
seconds each.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
EN
SUBSIDIARY SETTINGS (cont.)
Delete A Channel
When Receiving A Scrambled
Broadcast
Perform steps A and B of “Manual Channel Set” on page 69
to access the Confirmation screen before continuing.
A Select the item.
blinking.
Press rt w e until the item you want to delete begins
B Access the Confirmation screen.
Perform steps A and B of “Manual Channel Set” on
B Delete a channel.
page 69.
Press &.
C Select the position.
● The item directly beneath the cancelled one moves up one
line.
Press rt w e to select the channel position
broadcasting scrambled programmes, then press OK
twice.
● Repeat steps A and B as necessary.
C Close the Confirmation screen.
Press SET UP MENU.
D Change the decoder setting.
Press e until “OFF” (decoder setting) begins blinking,
Change Station Channel Position
E Return to the Confirmation screen.
Perform steps A and B of “Manual Channel Set” on page 69
to access the Confirmation screen before continuing.
Press OK.
● Repeat steps C – E as necessary.
A Select the item.
F Close the Confirmation screen.
Press rt w e until the item you want to move begins
blinking. Then press OK and the station name (ID) and its
channel (CH) number begin blinking.
Press SET UP MENU.
INFORMATION
B Select the new position.
If you live in Eastern Europe, “TV SYSTEM” setting appears
instead of “DECODER” setting on the Manual Channel Set
screen. When you can see the picture but can hear no audio,
programmes are broadcasted as follows.
Press rt w e to move the station to the new channel
position, then press OK.
Example: If you moved the station in position 4 to position 2, the
stations originally in positions 2 and 3 each move
down one space.
For Eastern Europe : D/K
For Western Europe : B/G
A Select a country in Eastern Europe in step E on page 68.
B Press e until the TV system (D/K or B/G) starts blinking on
the Manual Channel Set screen in step D on page 69.
C Press rt to select appropriate TV System (D/K or B/G).
● Repeat steps A and B as necessary.
C Close the Confirmation screen.
Press SET UP MENU.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
71
Set Stations (A)
B Enter the new character.
Set station names that are registered in your unit.
Press rt to cycle through the characters (A–Z, 0–9, –,
f, +, I (space) ) and stop when the desired character is
indicated, then press e to enter. Enter the remaining
characters the same way (maximum of 4). After entering
all characters, press OK.
Perform steps A and B of “Manual Channel Set” on page 69
to access the Confirmation screen before continuing.
● The Confirmation screen appears.
A Select the item.
● If you make a mistake, press w until the incorrect character
begins blinking. Then enter the correct character by pressing
rt.
Press rt w e until the item you want begins blinking.
B Access the Manual Channel Set screen.
C Close the Confirmation screen.
Press OK twice.
Press SET UP MENU.
C Select the new station.
NOTE:
The characters available for the station name (ID) are A–Z, 0–9, –,
name (ID) begins blinking,
then press rt until the new
station’s name (ID) you want
to store begins blinking.
Registered station names
(੬ pg. 72) appear as you
press rt.
f
, +,
I
(space) (maximum of 4).
Fine-Tuning Channels Already Stored
Perform steps A and B of “Manual Channel Set” on page 69
to access the Confirmation screen before continuing.
A Select the channel to fine-tune.
blinking.
D Switch the stations.
● The Confirmation screen appears.
● Repeat steps A – D as necessary.
Press rt w e until the channel you want to tune begins
Press OK.
B Access the Manual Channel Set screen.
E Close the Confirmation screen.
Press OK twice. The Manual Channel Set screen appears.
Press SET UP MENU.
C Perform tuning.
Press e until “+/–” begins blinking, then press rt until
the picture is its clearest. Then press OK.
● The Confirmation screen appears.
Set station names other than the ones registered in your unit.
● Repeat steps A – C as necessary.
Perform steps A and B of “Manual Channel Set” on page 69
to access the Confirmation screen and then perform steps A
and B of “Set Stations (A)” above before continuing.
D Close the Confirmation screen.
Press SET UP MENU.
A Select the character for station name.
Press e until the first letter of
the station name begins
blinking.
Download from Www.Somanuals.com. All Manuals Search And Download.
72
EN
SUBSIDIARY SETTINGS (cont.)
TV Station And ID List
* The “ID” abbreviation is what is shown on-screen in lieu of the station name. The “ID” abbreviation is listed in the Confirmation screen and is displayed
on the TV screen when the unit is tuned to a different station.
ID*
STATION NAME
ID*
STATION NAME
ID*
STATION NAME
1000
3SAT
9LIV
AB3
ADLT
ANIM
ANT3
ARD
ARTE
ATV
TV1000
JIM
JIM TV
JSTV
KA2
SHOW
SIC
SKY
SHOW
SOCIEDADE
SKY CHANNEL
SKY NEWS
SPEKTRUM
SPORT
SUPER RTL
STAR-TV
SVT1
SVT2
News
SUEDWEST3
TCC
TCM
3SAT
JSTV
9LIVE
AB3
ADULT
Animal Planet
ANTENA3
ARD
ARTE
ATV
KA2
KAB1
KAN2
KAN5
KBH
KIKA
LA7
LIB
LOCA
M6
KABEL1
KANAL2
KANAL5
Kbh. Kanal
Kinder kanal
LA7
Liberty TV
LOCAL
M6
MBR
MCM
MDR
MOVIE
MTV
MTV1
MTV2
MTV3
NGEO
News 24
NORD3
N-TV
NBC SUPER
NDR
SKYN
SPEK
SPRT
SRTL
STAR
SVT1
SVT2
SV24
SWR
TCC
TCM
TELE
TELE5
TF1
B1
BBC
BERLIN 1
BBC GROUP
BBC1
BBC1
BBC2
BBCW
BIO+
BLOO
BR3
C+
C1
C9
CAN5
CANV
CANZ
CH4
CH5
CHLD
CINE
CLUB
CMT
CNN
CSUR
CT1
CT2
DISC
DK1
DK2
DK4
MBC
MCM
MDR
MOVE
MTV
MTV1
MTV2
MTV3
NGEO
N24
BBC2
BBC WORLD
TV BIO+
BLOOMBERG
BAYERN3
CANAL PLUS
PORTUGUSES
C9
CANALE5
KETNET CANVAS
KANAAL Z
CHANNEL4
CHANNEL5
CHILD
CINEMA
TELECLUB
CMT
CNN
ANDALUCIA
CT 1
TELE
TELE5
TF1
TM
TM
TMC
TMF
TNT
TRT
TSI1
TELEMONTECARLO
TMF
TNT INT
TRT INT
TSI
TSI2
TSR
TSR2
BRTN TV1
TV2
TV2 Z
TV3
TV3 plus
TV4
TV5
TV6
TV8
TVE1
TVE2
TV GALICIA
TV INDEPENDENT
TV NORGE
TVN24
TVP1
TVP2
TV Polonia
V8
VIDEO
VH-1
VIT
VIVA
VIVA2
VIDEO MUSIC
VOX
VIASAT3
VT4
VTM
West3
WRLD
YLE1
YLE2
N3
N-TV
NBC
NDR
NED1
NED2
NED3
NET5
NEWS
NICK
NOVA
NRK1
NRK2
ODE
ORF1
ORF2
PHOE
POLS
PREM
PRIM
PRO7
RAI1
RAI2
RAI3
RET4
RTB1
RTB2
RTL
RTL2
RTL4
RTL5
RTL7
RTLK
RTP
RTV4
SAT1
SBS6
SERV
SF1
TSI2
TSR1
TSR2
TV1
TV2
TV2Z
TV3
TV3+
TV4
TV5
TV6
TV8
TVE1
TVE2
TVG
TVI
TVN
TV24
TVP1
TVP2
TV P
V8
VCR
VH-1
VIT
VIVA
VIV2
VMTV
VOX
VSAT
VT4
NED1
NED2
NED3
Net 5
NICKELODEON
NOVA TV
NRK
CT 2
DISCOVERY
TV Denmark 1
TV Denmark 2
Denmark 4
DR TV
NRK2
ODEON
ORF1
ORF2
PHOENIX
POLST
PREMIERE
PRIMA TV
PRO7
RAI1
RAI2
RAI3
RETE4
TELE21
RTBF 2
RTL
DR1
DR2
DSF
DR2
DSF
DUNA TV
ETB1
ETB2
Game/Shop/Music
EURO NEWS
EURONEWS
EUROSPORTS
FEMMAN
FILM
FILMNET
France2
France3
France5
GALAVISION
HBO
HESSEN3
HSEU
INFO-KANAL
ITALIA1
DUNA
ETB1
ETB2
ETV
EUNW
EURO
EUSP
FEMM
FILM
FNET
FR2
RTL2
RTL4
RTL5
FR3
FR5
RTL7
GALA
HBO
HR3
HSEU
INFO
ITA1
ITA7
ITV1
RTL KLUB
RTP
RTV4
SAT1
SBS
Service
SF1
SF2
VTM
WDR3
WRLD
YLE1
YLE2
YORN
ZDF
YORIN
ZDF
ZTV
ITALIA7
ITV
SF2
ZTV
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
73
C Set the video channel.
Press PR – until the front display panel shows “1 CH – –”
(or “2 CH – –”).
Video Channel Set
Video channel (RF output channel) is the channel on which your
RF cable.
With AV Connection
IMPORTANT
Perform the following steps only if —
— Video Channel Set has not been done correctly by the
Auto Set Up function (੬ pg. 10),
— interference appears in the TV picture after you have
moved to a different area or a new station has started
broadcasting in your area.
— you change the connection between your unit and TV
● Now the video channel is set to off.
With RF Connection
Press PR + or – to set the unit to a vacant channel
between 22 and 69 which is not occupied by any local
station in your area.
(Example) If channel 50 is available in your area
If you have connected the unit to your TV via the AV
connection (੬ pg. 9), since you do not need the video
channel you have to set the video channel to off.
If you have connected the unit to your TV via the RF
connection (੬ pg. 9), you have to set the correct video
channel.
Then set your TV to UHF channel 50.
● If the two vertical white bars appear
clearly on the TV screen as shown to
the right, go to step D.
● If the two vertical white bars do not
appear clearly, re-set the unit to
another vacant channel and try again.
Before performing the following steps:
● Make sure there is no cassette inserted in the unit.
● Press VCR/DVD on the unit or VCR on the remote control
so that the VCR indicator lights up, then press 1 to turn
off the unit.
NOTES:
● If you set the unit to a channel which is occupied by a local
station or has neighbouring channels that are occupied by
local stations, the picture reception quality will be affected
and some interference noise will appear on the TV screen. Be
sure to select a vacant channel which has no broadcast on
neighbouring channels.
A Access the Video Channel Set mode.
Hold down 8 on the unit until the front display panel
● If you cannot obtain the two vertical white bars clearly with
any channel between 22 and 69, consult your JVC dealer.
shows the following.
D Exit the Video Channel Set mode.
Press OK on the remote control.
B Set the RF output system.
With AV Connection
The blinking number on the display indicates the RF
output system of your country.
To view picture signals from the unit, set your TV to its
AV mode.
● If you have selected MAGYARORSZÁG, CESKÁ REPUBLIKA,
POLSKA or OTHER EASTERN EUROPE for the country setting
(੬ pg. 10, 15), press rt to set to “2”.
● For other countries, set to “1”. Then press OK.
(1: B/G 2: D/K)
With RF Connection
The channel on which the TV screen in step C
appears clearly is your video channel.
To view picture signals from the unit, set your TV to
the video channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
74
EN
SUBSIDIARY SETTINGS (cont.)
D Access the Clock Set screen.
Clock Set
Press rt to move the highlight bar (pointer) to “CLOCK
SET”, then press OK or e. The Clock Set screen appears.
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
NOTE:
When you have selected MAGYARORSZÁG, CESKÁ
REPUBLIKA, POLSKA or OTHER EASTERN EUROPE for the
country setting (੬ pg. 10, 15), you cannot use the Just Clock
function. Skip steps F and G.
E Set the date and time.
Press rt to set the time, then press OK or e. The
“DATE” display begins blinking. Repeat the same
procedure to set the date and year.
● When you set the time, press and hold rt to change the time
by 30 minutes.
● When you set the date, press and hold rt to change the date
by 15 days.
F Set Just Clock.
The default setting is “OFF”. Set as desired by pressing
rt, then press OK or e.
IMPORTANT
If you performed Auto Set Up (੬ pg. 10) or Preset
Perform the following steps only if —
—Auto Clock Set has not been performed correctly by Auto
Set Up or Preset Download.
● If you set it to “OFF”, you can disregard the next step as you
won’t be able to receive regular clock adjustments.
Set the source channel position for clock
data.
G
OR
—you want to change the Just Clock setting. (੬ pg. 75, “Just
Clock”)
The unit is preset to receive clock setting and adjustment
data from channel position 1.
Press rt to set the channel position to the number
representing the station transmitting clock setting data,
then press OK or e.
A Turn on the unit.
Press 1.
B Select the VHS deck.
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
H Start the clock operation.
On the unit
Press SET UP MENU.
On the remote control
Press VCR so that the VCR indicator lights up.
C Access the Main Menu screen.
Press SET UP MENU.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
75
Just Clock
Child Lock
The Just Clock function provides accurate time keeping
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
● Turn on the TV and select the video channel (or AV
mode).
The Just Clock option can be set “ON” or “OFF” at the Clock
Set screen (the default setting is “OFF”). Press OK until the
Just Clock setting begins blinking, then press rt to change
the setting.
IMPORTANT: If you turn off Just Clock, the accuracy of your
unit’s built-in clock may be reduced, which could adversely
effect timer recording. We recommend you to keep Just
Clock on. In cases where the clock setting data from a PDC
signal is incorrect, however, you are advised to keep Just
Clock set to “OFF”.
● Slide the TV/VCR/DVD switch to the right.
You can disable the unit’s operation.
A Set the Child Lock.
Press and hold 1 on the remote control for more than
10 seconds while the unit is turned on. The unit turns off,
and “CL“ appears on the front display panel.
NOTES:
● Just Clock (when set to “ON”) adjusts the unit’s built-in clock
every hour, except for 23:00, 0:00, 1:00 and 2:00.
— the unit’s power is on.
● To release the child lock, press and hold 1 on the remote
control until the unit turns on.
— the unit is in the Timer mode. (VHS deck only)
built-in clock’s time and the actual time.
— the unit is in the Automatic Satellite Programme Recording
mode. (੬ pg. 28) (VHS deck only)
NOTES:
● When the child lock function is in use, keep the remote
control out of the children’s reach.
— the unit is in the Power Save mode. (੬ pg. 64) (VHS deck
only)
— “L-2 SELECT” is set to “SAT”. (੬ pg. 64) (VHS deck only)
● If Just Clock is set to “ON”, the unit’s clock is automatically
adjusted at the start/end of Summer Time.
● Just Clock may not function properly depending on the
reception condition.
● Timer recording programmes will be performed even if the
child lock function activated.
Download from Www.Somanuals.com. All Manuals Search And Download.
76
EN
TROUBLESHOOTING
Before requesting service for a problem, use this chart
and see if you can repair the trouble yourself. Small
problems are often easily corrected, and this can save
you the trouble of sending your unit off for repair.
Noise appears during normal playback.
● The automatic tracking mode is engaged.
]Try manual tracking. (੬ pg. 20)
The playback picture is blurred or interrupted while TV
broadcasts are clear or “USE CLEANING CASSETTE”
message appears on the screen.
POWER
No power is supplied to the unit.
● The video heads may be dirty.
]Use a dry cleaning cassette ECL-3F, or consult your JVC
dealer.
● The mains power cord is disconnected.
]Connect the mains power cord.
The remote control won’t function.
Breaks are noticeable in Hi-Fi soundtrack.
● The batteries are discharged.
]Replace the dead batteries with new ones.
● The automatic tracking mode is engaged.
]Try manual tracking. (੬ pg. 20)
TAPE TRANSPORT (VHS deck)
PLAYBACK (DVD deck)
During recording, the tape does not run. “ ” lights up on
the front display panel.
The button does not work.
● The operation is prohibited on the placed disc.
● The unit is in the Record Pause mode.
]Press 4 to resume recording.
The DVD deck can not be operated.
● The DVD deck is not selected.
On the unit
]Press VCR/DVD repeatedly so that the DVD indicator lights
up.
The tape will not rewind or fast-forward.
● The tape is already fully rewound or fast-forwarded.
]Check the cassette.
On the remote control
]Press DVD so that the DVD indicator lights up.
PLAYBACK (VHS deck)
“
” appears on the TV screen.
The VHS deck can not be operated.
● The operation is prohibited on the placed disc.
● The VHS deck is not selected.
On the unit
“REGION CODE ERROR!” appears on the TV screen.
]Press VCR/DVD repeatedly so that the VCR indicator lights
up.
● The disc’s region number does not match that of the unit.
(੬ pg. 4)
On the remote control
]Press VCR so that the VCR indicator lights up.
The playback picture does not appear while the tape is
running.
The disc cannot be played back.
● The disc’s region number does not match that of the unit.
(੬ pg. 4)
● This type of disc cannot be played back.
]See “Unplayable Discs” (੬ pg. 4).
]Remove the disc, then place the disc properly in the disc tray.
(੬ pg. 5, “Placing a Disc”)
● The Parental Lock is engaged, and the placed disc is rated
higher than the set level.
— the TV receiver’s channel selector is not set to the video
channel.
— the unit’s video channel has not been correctly set.
]If you are using the RF connection,
— set the TV receiver to the video channel.
— perform “Video Channel Set” (੬ pg. 73).
● If you are using the AV connection, the TV receiver is not set
to the AV mode.
]If you are using the AV connection, set the TV to its AV mode.
]Release the Parental Lock temporarily (੬ pg. 45), or change
the set level (੬ pg. 45).
Noise appears during visual search.
The language is not played back as you set.
● This is normal.
● The disc does not contain the language you set.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
77
Changing audio/subtitle language is not possible.
JPEG Playback (DVD deck)
A disc cannot be played.
● The disc does not contain audio/subtitles in multiple
languages.
]With some discs, the language should be set on the top menu.
(੬ pg. 31)
● No JPEG files are recorded to the disc.
]Replace the disc.
● JPEG files do not have the correct file extension in their file
names.
The subtitles do not appear on the TV screen.
]Add correct file extension (.jpg, .jpeg, .JPG, .JPEG or any
uppercase and lowercase combination such as “.Jpg”) to their
file names.
● JPEG files are not recorded in a format compliant with ISO
9660 Level 1 or 2.
● The disc does not contain subtitles.
● The subtitle display is set to off.
]Set the subtitles display to on. (੬ pg. 40)
● A-B Repeat Playback is in progress. (੬ pg. 37)
]The subtitles recorded around point A-B may not appear.
application.)
Angle cannot be changed.
Not JPEG files but MP3 files are played back.
● The scene is not recorded from multiple angles.
● The MP3/JPEG setting is set to “MP3”.
]When both MP3 files and JPEG files are recorded to a disc, set
“MP3/JPEG” to “JPEG” to play JPEG files. (੬ pg. 66)
MP3 Playback (DVD deck)
A disc cannot be played.
● No MP3 files are recorded to the disc.
]Replace the disc.
● MP3 files do not have the correct file extension in their file
names.
]Add correct file extension (for example .mp3, .MP3 or any
uppercase and lowercase combination such as “.Mp3”) to
their file names.
● MP3 files are not recorded in a format compliant with ISO
9660 Level 1 or 2.
RECORDING (VHS deck)
Recording cannot be started.
● There is no cassette loaded, or the cassette loaded has had its
record safety tab removed.
]Insert a cassette, or using adhesive tape, cover the hole where
the tab was removed.
TV broadcasts cannot be recorded.
]Replace the disc. (Record MP3 files using a compliant
application.)
● “L-1”, “L-2” or “F-1” has been selected as the input mode.
]Set to the desired channel.
● The different types of files are recorded to the disc.
]The disc which contains the different types of files may not be
played because of its disc characteristics or recording
conditions.
Tape-to-tape editing is not possible.
● The source (another video recorder, camcorder) has not been
properly connected.
]Confirm that the source is properly connected.
● All necessary power switches have not been turned on.
]Confirm that all units’ power switches are turned on.
● The input mode is not correct.
Not MP3 files but JPEG files are played.
● The MP3/JPEG setting is set to “JPEG”.
]When both MP3 files and JPEG files are recorded to a disc, set
“MP3/JPEG” to “MP3” to play MP3 files. (੬ pg. 66)
]Set the input mode to “L-1”, “L-2” or “F-1”.
The MP3 control display appears on the TV screen, but no
operation can be performed.
Camcorder recording is not possible.
● The camcorder has not been properly connected.
]Confirm that the camcorder is properly connected.
● The input mode is not correct.
● No MP3 files or JPEG files are recorded to the disc, or the disc
is an unplayable disc (such as CD-ROM).
]Replace the disc.
]Set the input mode to “L-1”, “L-2” or “F-1”.
“
” and “ ” on the front display panel won’t stop blinking.
● The end of the tape was reached during recording.
]The programme may not have been recorded in its entirety.
Next time make sure you have enough time on the tape to
record the entire programme.
Download from Www.Somanuals.com. All Manuals Search And Download.
78
EN
TROUBLESHOOTING (cont.)
OTHER PROBLEMS
TIMER RECORDING (VHS deck)
Timer recording won’t work.
The image of the TV broadcast appears distorted on the TV
screen.
● The clock and/or the timer have been set incorrectly.
]Re-perform the clock and/or timer settings.
● The timer is not engaged.
]Press # and confirm that “#” is displayed on the front display
panel.
● The unit is left turned on and the DVD deck is selected.
]Turn off the unit, or press VCR to select the VHS deck, then
press TV/VCR so that the VCR indicator disappears from the
front display panel.
Whistling or howling is heard from the TV during camcorder
recording.
Timer programming is not possible.
● Timer recording is in progress.
]Timer programming can’t be performed while a timer
recording is in progress. Wait until it finishes.
● The camcorder’s microphone is too close to the TV.
● The TV’s volume is too high.
“
” on the front display panel won’t stop blinking.
]Turn the TV’s volume down.
● The timer is engaged but there’s no cassette loaded.
]Load a cassette with the record safety tab intact.
When scanning channels, some of them are skipped over.
● Those channels have been designated to be skipped.
]If you need the skipped channels, restore them. (੬ pg. 69)
“
”, “ ” and “ ” on the front display panel won’t stop
blinking.
The channel cannot be changed.
● The loaded cassette has had its record safety tab removed.
]Remove the cassette and cover the hole with adhesive tape, or
insert a cassette with the record safety tab intact.
● The end of the tape was reached during timer recording.
]The programme may not have been recorded in its entirety.
Next time make sure you have enough time on the tape to
record the entire programme.
● Recording is in progress.
]Press 9 to pause the recording, change channels, then press
4 to resume recording.
Channel settings that were made manually seem to have
changed or disappeared.
● After the manual settings were made, Auto Channel Set was
performed.
]Perform manual setting again.
“
” blinks for 10 seconds and the Timer mode is
disengaged.
● # has been pressed when there are no programs in memory,
or the timer record information has been programmed
incorrectly.
]Check the programmed data and re-program as necessary,
then press # again.
● The TV aerial cable was not connected to the unit when Auto
Set Up was performed.
]Turn off the unit once and connect the TV aerial cable to the
unit properly, then turn on the unit again. Then perform Auto
Set Up again. (੬ pg. 10)
The SHOWVIEW system does not timer-record properly.
● The fully-wired 21-pin SCART cable was not connected
between the TV and the unit when Preset Download was
performed.
● The unit’s channel positions have been set incorrectly.
]Refer to “SHOWVIEW® Timer Programming” (੬ pg. 24) and re-
perform the procedure.
]Turn off the unit once and connect the fully-wired 21-pin
SCART cable to the unit properly, then turn on the unit again.
Then perform Preset Download again. (੬ pg. 12)
“
” and “ ” on the front display panel won’t stop blinking.
● The end of the tape was reached during Instant Timer
Recording.
]The programme may not have been recorded in its entirety.
Next time make sure you have enough time on the tape to
record the entire programme.
ATTENTION
This unit contains microcomputers. External electronic noise
or interference could cause malfunctioning. In such cases,
switch the unit off and unplug the mains power cord. Then
plug it in again and turn the unit on. Take out the cassette.
After checking the cassette, operate the unit as usual.
“
”, “ ” and “ ” on the front display panel won’t stop
blinking.
● The loaded cassette has had its record safety tab removed.
]Remove the cassette and cover the hole with adhesive tape, or
insert a cassette with the record safety tab intact.
● The end of the tape was reached during Automatic Satellite
Programme Recording.
]The programme may not have been recorded in its entirety.
Next time make sure you have enough time on the tape to
record the entire programme.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
79
SPECIFICATIONS
GENERAL
VIDEO/AUDIO (DVD deck)
Power requirement : AC 220 V – 240 Vd, 50 Hz/60 Hz
Signal system
: PAL
: DVD (12 cm, 8 cm)
CD (12 cm, 8 cm)
Power consumption
Applicable disc
Power on
Power off
: 26 W
: 6.0 W
Audio characteristics
DVD
Frequency responce
CD
S/N Ratio
Temperature
Operating
Storage
: 4 Hz – 22 KHz
: 5°C to 40°C
: –20°C to 60°C
: 4 Hz – 20 KHz
: 90 dB
: Below Measurable Level
: 90 dB
Operating position : Horizontal only
Dimensions (WxHxD)
Wow and flutter
Dynamic range
Output
: 435 mm x 93 mm x 272 mm
: 4.4 kg
: VHS PAL standard
Weight
Format
Audio
: (RCA) 2 Vrms, 1 Kohm
Maximum recording time
Digital Audio : –21 dBm to –15 dBm (peak)
(SP)
(LP)
: 240 min. with E-240 video cassette
: 480 min. with E-240 video cassette
TUNER/TIMER (VHS deck)
TV channel storage capacity
: 99 positions (+AUX position)
VIDEO/AUDIO (VHS deck)
Signal system : PAL-type colour signal and CCIR
Tuning system
: Frequency synthesized tuner
monochrome signal, 625 lines
50 fields
Recording system : DA4 (Double Azimuth) head helical
scan system
Channel coverage : VHF 47 MHz – 89 MHz/
104 MHz – 300 MHz/
302 MHz – 470 MHz
UHF 470 MHz – 862 MHz
Signal-to-noise ratio: 45 dB
Horizontal resolution
Aerial output
Memory backup time
: Approx. 10 min.
: UHF channels 22 – 69 (Adjustable)
: 250 lines
Frequency range : 70 Hz to 10,000 Hz (Normal audio)
20 Hz to 20,000 Hz (Hi-Fi audio)
ACCESSORIES
Provided accessories
Input/Output
: 21-pin SCART connectors:
IN/OUT x 1, IN/DECODER x 1
RCA connectors:
VIDEO IN x 1, AUDIO IN x 1,
AUDIO OUT x 1
: RF cable,
Infrared remote control unit,
“R6” battery x 2
Specifications shown are for SP mode unless otherwise
specified.
E.& O.E. Design and specifications subject to change without
notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
80
EN
LIST OF TERMS
A
J
A-B Repeat Playback ............................................ 37
About Discs
JPEG .............................................................. 51
MP3 .............................................................. 48
Placing a Disc .................................................. 5
Playable Discs .................................................. 4
Region Number ................................................ 4
Unplayable Discs .............................................. 4
Angle Selection .................................................... 41
Audio Channel Selection ....................................... 43
Audio Language Selection ..................................... 42
Auto Channel Set ................................................. 68
Auto Set Up ......................................................... 10
Automatic Satellite Programme Recording ............... 28
L
(DVD deck only) ........................................16
On-screen Language Set (VHS deck) ..................15
Letter Box ............................................................14
M
Mode Set (DVD deck)
C
Change Station Channel Position ............................ 70
Chapter Search .................................................... 38
Check, cancel and change programmes .................. 27
Child Lock .......................................................... 75
Clock Set ............................................................ 74
Connecting To A Dolby Digital Decoder or An Amplifier
With A Built-in DTS ......................................... 61
Connecting To A Satellite Receiver ......................... 60
Connecting/Using A Decoder ................................. 61
DIGITAL AUDIO OUT .....................................66
MENU LANGUAGE .........................................16
OUTPUT LEVEL ..............................................66
PICTURE SOURCE ..........................................66
RESUME ........................................................67
SUBTITLE .......................................................16
Mode Set (VHS deck)
DIRECT REC ...................................................63
O.S.D. ..........................................................63
PICTURE CONTROL ........................................63
Monitor Set (DVD deck)
D
Delete A Channel ................................................. 70
Digital Audio Dubbing .......................................... 57
Disc menu .......................................................... 31
Dubbing (from DVD to VHS) ................................. 56
E
EDITING (DVD DECK)
Digital Audio Dubbing ..................................... 57
EDITING (VHS DECK)
Dubbing (from DVD to VHS) ............................ 56
Edit From A Camcorder .................................... 54
Edit To Or From Another Video Recorder ........... 55
Elapsed Recording Time Indication ......................... 22
Express Timer Programming ................................... 26
F
Fine-Tuning Channels Already Stored ...................... 71
G
Group/file selection .............................................. 53
Group/track selection ........................................... 50
N
I
INDEX .................................................................. 6
Index Search ........................................................ 19
Instant ReView ..................................................... 20
Instant Timer Recording (ITR) ................................. 22
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
81
O
OPERATIONS ON DVD DECK ....................... 30 – 53
OPERATIONS ON VHS DECK ........................ 18 – 29
3D Phonic ...........................................................33
P
Pan&Scan ........................................................... 14
Parental Lock
Country/Area Code List .................................... 46
To change the settings ..................................... 45
To set Parental Lock for the first time .................. 44
To temporarily release the Parental Lock ............ 45
Playback (DVD deck) .................................... 30 – 40
Playback (JPEG) ............................................ 52 – 53
Playback (MP3) ............................................. 49 – 50
Playback (VHS deck) ..................................... 18 – 20
Playback Control (PBC) Function .......................31, 38
Preset Download .................................................. 12
Programme Playback ............................................ 39
R
Random Playback ................................................ 40
Recording .................................................... 21 – 23
Recording Resume Function .................................. 21
Region Number ..................................................... 4
Remote Control Functions ..................................... 58
Repeat Playback ................................. 20, 36, 50, 53
Resume Function ................................................. 32
S
Set Stations (A) ..................................................... 71
Set Stations (B) ..................................................... 71
SHOWVIEW® Timer Programming ............................. 24
Skip Search ......................................................... 19
Slow Motion ...................................................19, 32
Soundtrack Selection ............................................ 20
Still Picture/Frame-By-Frame Playback ...............19, 32
Subtitle Selection ................................................. 40
T
Tape Position Indicator ........................................... 7
Tape Remaining Time ........................................... 22
Time Search ........................................................ 38
Timer Recording ........................................... 24 – 29
Top menu ........................................................... 31
Tuner Set ..................................................... 68 – 72
T-V LINK ............................................................. 13
TV Station And ID List ........................................... 72
V
Variable Speed Search .................................... 19, 32
VFP function ........................................................ 34
Video Channel Set ................................................ 73
VPS/PDC Recording ............................................. 25
W
When programmes overlap each other .................... 28
When Receiving A Scrambled Broadcast ................. 70
Z
Zooming ........................................................33, 53
Download from Www.Somanuals.com. All Manuals Search And Download.
82
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
83
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Printed in Germany
0903-MN-ID-VE
Download from Www.Somanuals.com. All Manuals Search And Download.
|