JVC DVD VCR Combo 3834RV0038A User Manual

DVD PLAYER &  
VIDEO CASSETTE RECORDER  
HR-XV45SEK  
PAL  
INSTRUCTIONS  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Introduction . . . . . . . . . . . . . . . . . . .4  
Symbol Used in this Manual . . . . . . . . . . . . . . .4  
About the  
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Handling Discs . . . . . . . . . . . . . . . . . . . . . . . .4  
Storing Discs . . . . . . . . . . . . . . . . . . . . . . . . .4  
Cleaning Discs . . . . . . . . . . . . . . . . . . . . . . . .4  
Types of Playable Discs . . . . . . . . . . . . . . . . . . .5  
Regional code . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Disc-related terms . . . . . . . . . . . . . . . . . . . . . . .6  
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Display Window . . . . . . . . . . . . . . . . . . . . . . . . .7  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .8  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Playing a DVD or Video CD . . . . . . . . . . . . . . .27-29  
General Features . . . . . . . . . . . . . . . . . . . . . . .27  
Moving to another TITLE . . . . . . . . . . . . . . .27  
Moving to another CHAPTER/TRACK . . . . . .27  
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Changing the Audio Channel . . . . . . . . . . . .27  
Still Picture and Frame-by-Frame Playback . .28  
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . .28  
Random . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
3D Surround . . . . . . . . . . . . . . . . . . . . . . . . .28  
Time Search . . . . . . . . . . . . . . . . . . . . . . . . .28  
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Marker Search . . . . . . . . . . . . . . . . . . . . . . .29  
Special DVD Features . . . . . . . . . . . . . . . . . . .29  
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Camera Angle . . . . . . . . . . . . . . . . . . . . . . .29  
Changing the Audio Language . . . . . . . . . . .29  
Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Playing an Audio CD or MP3 Disc . . . . . . . . . . . .30  
Audio CD and MP3 Disc Features . . . . . . . . . . . .31  
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Moving to another Track . . . . . . . . . . . . . . . .31  
Repeat Track/All/Off . . . . . . . . . . . . . . . . . . .31  
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Random . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . .31  
3D Surround . . . . . . . . . . . . . . . . . . . . . . . . .31  
Programmed Playback . . . . . . . . . . . . . . . . . . . . .32  
Repeat Programmed Tracks . . . . . . . . . . . . .32  
Erasing a Track from Program List . . . . . . . .32  
Erasing the Complete Program List . . . . . . . .32  
Viewing a JPEG Disc . . . . . . . . . . . . . . . . . . . . . .33  
Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . .33  
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . .33  
Moving to another File . . . . . . . . . . . . . . . . .33  
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33  
To rotate picture . . . . . . . . . . . . . . . . . . . . . .33  
To listen to MP3 music watching picture . . . . . . .33  
Playing a DVD VR format Disc . . . . . . . . . . . . .34  
Maintenance and Service . . . . . . . . . . . . . . . . .34  
Playing a DivX Movie Disc . . . . . . . . . . . . . . . .35  
Additional Features-VCR part . . . . . . . . . . .36-37  
On Screen Display . . . . . . . . . . . . . . . . . . . .36  
Tape Counter Memory Stop . . . . . . . . . . . . .36  
Video Doctor (Self-Diagnosis) . . . . . . . . . . . .36  
Hi-Fi Stereo Sound System . . . . . . . . . . . . .37  
Wide Screen Compatibility 16:9 . . . . . . . . . .37  
To set the decoder . . . . . . . . . . . . . . . . . . . .37  
Additional Features . . . . . . . . . . . . . . . . . . . . .38  
Last Scene Memory . . . . . . . . . . . . . . . . . . .38  
Screen Saver . . . . . . . . . . . . . . . . . . . . . . . .38  
Copying from DVD To VCR . . . . . . . . . . . . . . .38  
Recording from another video recorder . . . . .38  
Symbol Display . . . . . . . . . . . . . .4  
Installation and Setup . . . . . . . . . .10  
Connecting to a TV & Decoder (or Satellite) . .10  
Connecting to Optional Equipment . . . . . . . . .11  
Before Operation-VCR part . . . . . . . . . . . . .12-16  
Tuning in a video channel on your TV . . . .12  
Using your VCR for the very first time . . .12  
Setting the clock Manually . . . . . . . . . . . . .13  
To set the colour system . . . . . . . . . . . . . .13  
How to using the main menu . . . . . . . . . . .14  
Tuning in TV Stations Automatically . . . . .14  
Tuning in TV Stations Manually . . . . . . . . .15  
Changing the order of TV Stations . . . . . .16  
Deleting TV stations . . . . . . . . . . . . . . . . . .16  
Before Operation-DVD part . . . . . . . . . . . . .17-21  
On-Screen Display . . . . . . . . . . . . . . . . . . . . . .17  
Initial Settings . . . . . . . . . . . . . . . . . . . . . . .18-21  
General Operation . . . . . . . . . . . . . . . . . . . .18  
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . .18  
Menu Language . . . . . . . . . . . . . . . . . . . .18  
Disc Audio / Subtitle / Menu . . . . . . . . . . . .18  
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
TV Aspect . . . . . . . . . . . . . . . . . . . . . . . . .19  
Display Mode . . . . . . . . . . . . . . . . . . . . . .19  
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Dolby Digital / DTS / MPEG . . . . . . . . . . . .19  
Sample Freq. (Frequency) . . . . . . . . . . . .19  
Dynamic Range Control (DRC) . . . . . . . . .19  
Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Auto Play . . . . . . . . . . . . . . . . . . . . . . . . . .20  
DivX(R) VOD . . . . . . . . . . . . . . . . . . . . . . .20  
LOCK (Parental Control) . . . . . . . . . . . . . . . .21  
Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Password (Security Code) . . . . . . . . . . . . .21  
Area Code . . . . . . . . . . . . . . . . . . . . . . . . .21  
Operation . . . . . . . . . . . . . . . . . . . .22  
Reference . . . . . . . . . . . . . . . . . . . .39  
Playing a tape . . . . . . . . . . . . . . . . . . . . . . .22-24  
CM (Commercial Message) Skip . . . . . . . .22  
OPR (Optimum Picture Response) . . . . . .22  
Instant Timer Recording . . . . . . . . . . . . . . . . .23  
VIDEO Plus+ Programming . . . . . . . . . . . . . . .24  
Timer recording using On Screen Display .25-26  
Language Codes . . . . . . . . . . . . . . . . . . . . . . .39  
Country Codes . . . . . . . . . . . . . . . . . . . . . . . . .39  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .40  
Specification . . . . . . . . . . . . . . . . . . . . . . . . . .41  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . .42  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
To ensure proper use of this product, please read this  
owner’s manual carefully and retain for future  
reference.  
Notes on Discs  
Handling Discs  
Do not touch the playback side of the disc. Hold the  
disc by the edges so that fingerprints do not get on  
the surface. Never stick paper or tape on the disc.  
This manual provides information on the operation  
and maintenance of your DVD player. Should the unit  
require service, contact an authorized service location.  
Symbol Used in this Manual  
The lightning flash symbol alerts you to the  
presence of dangerous voltage within the  
product enclosure that may constitute a risk of  
electric shock.  
Storing Discs  
After playing, store the disc in its case. Do not expose  
the disc to direct sunlight or sources of heat and never  
leave it in a parked car exposed to direct sunlight.  
The exclamation point alerts you to the  
presence of important operating and  
maintenance / servicing instructions.  
Cleaning Discs  
Fingerprints and dust on the disc can cause poor  
picture quality and sound distortion. Before playing,  
clean the disc with a clean cloth. Wipe the disc from  
the center out.  
Indicates hazards likely to cause harm to the  
unit itself or other material damage.  
Note:  
Indicates special notes and operating features.  
Tip:  
Indicates tips and hints for making the task easier.  
Do not use strong solvents such as alcohol, benzine,  
thinner, commercially available cleaners, or anti-static  
spray intended for older vinyl records.  
A section whose title has one of the following symbols  
is applicable only to the disc represented by the  
symbol.  
DVD  
DVD and finalized DVD R/RW  
Selecting the Viewing Source  
You must select one of your output sources (DVD or  
VCR) to view on the TV screen.  
VCD  
Video CDs  
CD  
Audio CDs  
MP3  
• If you want to view DVD deck output source:  
Press DVD until DVD indicator in the display window lights  
and output source of DVD deck is viewed on the TV  
screen.  
MP3 Discs  
JPEG  
JPEG Discs  
DivX  
DivX Discs  
• If you want to view VCR deck output source:  
Press VCR until VCR indicator in the display window lights  
and output source of VCR deck is viewed on the TV  
screen.  
About the  
Symbol Display  
Notes:  
If you insert a disc while the DVD+VCR is in the  
VCR mode, the DVD+VCR will switch to DVD mode  
automatically.  
If you insert a cassette tape without prevention tab  
while the DVD+VCR is in the DVD mode, the  
DVD+VCR will switch to VCR mode automatically.  
” may appear on your TV display during  
operation and indicates that the function explained in  
this owner’s manual is not available on that specific  
DVD video disc.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Types of Playable Discs  
Regional code  
This DVD player is designed and  
manufactured for playback of region “2”  
encoded DVD software. This unit can play  
only DVD discs labeled “2” or “ALL”.  
DVD  
2
(8 cm / 12 cm disc)  
Video CD (VCD)  
(8 cm / 12 cm disc)  
Notes on Regional Codes  
Audio CD  
(8 cm / 12 cm disc)  
• Most DVD discs have a globe with one or more  
numbers in it clearly visible on the cover.  
This number must match your DVD player’s regional  
code or the disc cannot play.  
In addition, this unit plays DivX file, DVD -R, DVD +R,  
DVD -RW, DVD +RW, SVCD, and CD-R / CD-RW that  
contains audio titles, MP3 or JPEG files.  
• If you try to play a DVD with a different region code  
from your player, the message “Check Regional  
Code” appears on the TV screen.  
This indicates a product feature that is  
capable of playing DVD-RW discs  
recorded with Video Recording format.  
Notes:  
• Depending on the conditions of the recording  
equipment or the CD-R/RW (or DVD -R, DVD +R,  
DVD -RW, DVD +RW) disc itself, some CD-R/RW  
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs  
cannot be played on the unit.  
• Do not attach any seal or label to either side (the  
labeled side or the recorded side) of a disc.  
• Do not use irregularly shaped CDs (e.g.,  
heart-shaped or octagonal) since they may result in  
malfunctions.  
Notes on DVDs and Video CDs  
Some playback operations of DVDs and Video CDs  
may be intentionally programmed by software  
manufacturers. This unit plays DVDs and Video CDs  
according to disc content designed by the software  
manufacturer, therefore some playback features may  
not be available or other functions may be added.  
Manufactured under license from Dolby  
Laboratories. “Dolby”, and the double-D symbol  
are trademarks of Dolby Laboratories.  
DTS and DTS Digital Out are trademarks of  
Digital Theater Systems, Inc.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
PBC: Playback Control (Video CD only)  
Playback control is available for Video CD (VCD)  
version 2.0 disc formats. PBC allows you to interact  
with the system via menus, search functions, or other  
typical computer-like operations. Moreover, still  
pictures of high resolution can be played if they are  
included in the disc. Video CDs not equipped with  
PBC (Version 1.1) operate in the same way as audio  
CDs.  
Disc-related terms  
DVD R / DVD RW  
DVD -R and DVD +R are two different standards for  
recordable DVD drives and discs. This format allows  
information to be recorded onto the DVD disc only  
once. DVD +RW and DVD -RW are two standards for  
re-writable media, meaning the DVD content can be  
erased and re-recorded. Single-sided discs can hold  
4.38 Gigabytes and double-sided discs hold twice as  
much. There are no dual layer single sided recordable  
discs.  
Title (DVD video discs only)  
A title is generally a distinct section of a DVD disc. For  
example the main feature could be title 1, a documen-  
tary describing how the film was made could be title 2,  
and cast interviews could be title 3. Each title is  
assigned a reference number enabling you to locate it  
easily.  
VCD (Video CD)  
A VCD holds up to 74 minutes (650 MB disc) or 80  
minutes (700 MB disc) of MPEG-1 full-motion video  
along with quality stereo sound.  
Chapter (DVD video discs only)  
MPEG  
A chapter is a segment of a title such as a scene in a  
film or one interview in a series. Each chapter is  
assigned a chapter number, enabling you to locate the  
chapter you want. Depending on the disc, chapters  
may not be recorded.  
MPEG is an international standard for video and audio  
compression. MPEG-1 is used in encoding video for  
VCD and provides for multichannel surround sound  
coding such as PCM, Dolby Digital, DTS and MPEG  
audio.  
Scene (VCD)  
MP3  
On a video CD with PBC (playback control) functions,  
moving pictures and still pictures are divided into  
sections called “scenes”. Each scene is displayed in  
the menu screen and assigned a scene number,  
enabling you to locate the scene you want. A scene is  
composed of one or several tracks.  
MP3 is a popular compression format used for digital  
audio files that yields very high near-CD quality.  
JPEG  
Joint Pictures Expert Group. JPEG is a compressed  
file format that allows you to save images with no limit  
on the number of colors.  
Track  
A distinct element of audiovisual information, such as  
the picture or sound track for a specific language  
(DVD), or a musical piece on a video or audio CD.  
Each track is assigned a track number, enabling you  
to locate the track you want. DVD discs allow one  
track of video (with multiple angles) and several tracks  
of audio.  
DivX  
DivX is the name of a revolutionary new video codec  
which is based on the new MPEG-4 compression  
standard for video.You will be able to play DivX  
movies using this DVD player.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel  
m
Go to beginning of current chapter/track or to PREVIOUS chapter/track.  
Press and hold for two seconds for a fast reverse search.  
Rewinds the tape.  
M
Go to NEXT chapter/track.  
Press and hold for two seconds for a fast forward search.  
Winds the tape forwards.  
Á Stops playback.  
EJECT  
X
Tape Eject  
Pause playback or recording. Press  
Tape Compartment  
repeatedly for frame-by-frame playback.  
OPEN/CLOSE (  
Opens or closes the disc tray.  
)
z
To record normally or to activate  
One-touch Timer Recording by  
repeated presses.  
Remote Sensor  
Point the remote  
control here.  
DVD/VCR Selector  
Audio IN  
(L/R) Jacks  
PROG.(-/+)  
Channel  
Programme  
Disc Tray  
Insert a disc here.  
1/I  
Switches the  
unit to ON or  
OFF.  
Display window  
Shows the current  
status of the unit.  
Video IN Jack  
N Starts playback.  
Selectors  
.
Display Window  
DVD+VCR is in timer recording or a  
timer recording is programmed.  
A Cassette is in the VCR deck.  
VCR deck is selected.  
Indicates repeat mode.  
VCR recording is engaged.  
DVD to VHS copy is in  
progress.  
A disc is loaded in the DVD deck.  
(Lights when a disc is loaded in the  
DVD deck and flashes when no disc is  
loaded.)  
Indicates TV mode.  
(See Notes on page 23.)  
DVD deck is selected.  
DVD  
VCR  
REC  
TV  
Indicates total playing time/elapsed time/current time  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
1/I  
OPEN/CLOSE, EJECT(  
)
- Ejects the tape in the VCR deck.  
- Opens and closes the disc tray.  
Switches DVD+VCR ON and OFF.  
TV/VCR  
To view channels selected by the VCR  
tuner or by the TV tuner.  
DVD ꢀ  
Select the DVD+VCR function mode to  
DVD.  
AUX  
Select input source for recording into  
tape.  
DISC MENU  
Accesses menu on a DVD disc.  
VCR ꢀ  
Select the DVD+VCR function mode  
to VCR.  
SKIP (. / >)  
Skip to beginning of current chapter or track,  
press twice in quick successions to go to  
previous chapter or track.  
DISPLAY  
:
- - - -  
- Accesses On-Screen Display (DVD).  
- Shows you the current time or  
counter (VCR).  
Skip to next chapter or track.  
RETURN  
- Removes the setup menu.  
- Displays the menu of a video CD with  
PBC.  
b/B/v/V  
- Selects menu options.  
- PR/TRK (+/-): Selects VCR  
channels. Adjusts manually the tape’s  
picture on the screen.  
x
Stops playback or recording.  
MNL. PROG.  
Places a track on the program list.  
SETUP/MENU (i)  
Accesses or removes DVD Setup  
menu and VCR menu.  
CLEAR (  
)
ENTER/OK  
Confirms menu selections. Displays  
functions on the TV screen.  
Removes a track number on the  
program menu or a mark on the  
MARKER SEARCH menu.  
X
- Pause playback or recording.  
- Press repeatedly for frame-by-frame  
playback.  
A.MONITOR  
Selects an audio language (DVD) or an  
audio channel (VCD).  
(m) ꢀ  
- For fast reverse picture search.  
- Rewinds the tape during the STOP mode.  
N ꢀ  
SUBTITLE  
Selects a subtitle language.  
ANGLE  
Selects a DVD camera angle, if available.  
Starts playback.  
ZOOM  
Enlarges DVD video image.  
(M) ꢀ  
- For fast forward picture search.  
- Advances the tape during the STOP mode.  
MARKER  
Marks any point during playback.  
0-9 numerical buttons  
Selects numbered options in a menu.  
SEARCH  
Displays Marker Search menu.  
TITLE  
Displays the disc’s Title menu, if  
available.  
REPEAT ꢀ  
Repeat chapter, track, title or all.  
RANDOM (  
) ꢀ  
- Plays tracks in random order.  
- CM SKIP  
REC ()  
REPEAT A-B ꢀ  
Repeats sequence between two  
points (A and B)  
Records normally or activates One  
touch Timer Recording with repeated  
presses.  
Selects recording speed.  
VIDEO Plus+ ꢀ  
To display the programme menu  
for VIDEO Plus+ programming.  
Remote Control Operation  
Point the remote control at the remote sensor and  
press the buttons.  
Remote control battery installation  
Detach the battery cover on the rear  
of the remote control, and insert two  
Do not mix old and new batteries and never  
mix different types of batteries such as stan-  
dard, alkaline, etc.  
batteries (size AAA) with  
aligned correctly.  
and  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear Panel  
AERIAL  
Connect the aerial using this jack.  
DVD/VCR OUT (VIDEO/AUDIO (Left/Right))  
Connect to a TV with video and audio inputs.  
AUDIO OUT (Left/Right) (DVD EXCLUSIVE OUT)  
Connect to an amplifier, receiver or stereo system.  
EURO AV2 DECODER (VCR IN+OUT/DVD OUT)  
Connect to pay-TV decoder, Set Top Box or another  
video recorder.  
AC Power Cord  
Connect to a power source.  
EURO AV1 AUDIO/VIDEO (VCR IN+OUT/DVD OUT)  
Connect to your TV set or another video recorder.  
COAXIAL (DVD EXCLUSIVE OUT)  
(Digital audio out jack)  
Connect to digital (coaxial) audio equipment.  
RF.OUT  
Connect to your TV using this jack.  
Do not touch the inner pins of the jacks on the rear panel. Electrostatic  
discharge may cause permanent damage to the unit.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
Tips:  
Depending on your TV and other equipment there  
are various ways you can connect the player.  
Please refer to the manuals of your TV, VCR,  
stereo system or other devices as necessary for  
additional connection information.  
Notes:  
The picture and sound of a nearby TV, VCR, or radio may  
be distorted during playback. Position the units away from  
each other or turn off the unit after removing the disc.  
Make sure the DVD+VCR is connected directly to the TV  
and tune the TV to the correct video input channel.  
Do not connect the DVD+VCR’s AUDIO OUT jack to the  
phono in jack (record deck) of your audio system. Do not  
connect the DVD+VCR via another VCR. The DVD image  
could be distorted by the copy protection system.  
Connecting to a TV & Decoder  
(or Satellite)  
Make one of the following connections, depending on  
the capabilities of your existing equipment.  
Rear of TV  
AERIAL  
VIDEO IN  
AUDIO INPUT  
SCART INPUT  
L
R
Basic connection (AV)  
1. Connect the EURO AV1 AUDIO/VIDEO on the  
rear panel of this unit to the SCART input socket  
on the TV using a SCART lead (not supplied).  
For TV without SCART, connect the yellow VIDEO  
OUT jack and DVD/VCR AUDIO OUT jacks of this  
unit to the TV.  
Decoder (or Satellite)  
2. Some TV broadcasters transmit encoded television  
signals which you can only see with a purchased  
or rented decoder. You can connect such a  
decoder (descrambler) to this unit.  
Basic connection (RF)  
1. Connect the RF antenna cable from your indoor/  
outdoor antenna to AERIAL jack on the rear panel  
of this unit.  
Rear of this unit (Basic connection)  
2. Connect the supplied RF antenna cable from the  
RF.OUT jack on the rear panel of this unit to your  
television’s Antenna Input.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes:  
Connecting to Optional Equipment  
Connecting to an amplifier equipped with two  
channel analog stereo or Dolby Pro Logic  
II/Pro Logic  
If the audio format of the digital output does not match  
the capabilities of your receiver, the receiver will  
produce a strong, distorted sound or no sound at all.  
To see the audio format of the current DVD in the  
On-Screen Display, press A.MONITOR.  
Connect the Left and Right AUDIO OUT jacks on this  
unit to the audio left and right in jacks on your amplifi-  
er, receiver or stereo system, using the audio cables.  
Connecting to an amplifier equipped with two  
channel digital stereo (PCM) or to an Audio/  
Video receiver equipped with a multi-channel  
decoder (Dolby Digital™, MPEG 2 or DTS)  
1. Connect this unit’s DIGITAL AUDIO OUT jack  
(COAXIAL) to the corresponding in jack on your  
amplifier. Use an optional digital (coaxial) audio  
cable.  
2. You will need to activate this unit’s digital output.  
(See “AUDIO” on page 19).  
Digital Multi-channel sound  
A digital multi-channel connection provides the best  
sound quality. For this you need a multi-channel  
Audio/Video receiver that supports one or more of the  
audio formats supported by your unit (MPEG 2, Dolby  
Digital and DTS). Check the receiver manual and the  
logos on the front of the receiver.  
Warning:  
Due to the DTS Licensing agreement, the digital  
output will be in DTS digital out when DTS audio  
stream is selected.  
Rear of this unit  
2 channel analog stereo or Dolby Surround connection.  
Digital multi-channel  
DVD exclusive out  
connection  
R
L
COAXIAL  
DIGITAL INPUT  
AUDIO INPUT  
Amplifier (Receiver)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation-VCR part  
Tuning in a video channel on your  
TV  
Notes:  
The output frequency of this DVD+VCR is set at  
UHF channel 36. If channel 36 is already used by  
another TV station, or if the picture is distorted, you  
RF CHANNEL 36  
7. Use PROG. (-/+) to select another video channel.  
You may select any channel number between 22  
and 68.  
can change the transmitter channel of your  
DVD+VCR. Stages 5 ~ 8 will show you how to  
change the output frequency of your DVD+VCR.  
8. Select a TV channel which you wish to watch  
video.  
Your TV receives signals from the DVD+VCR like  
another TV station. You have to select a channel  
number on your TV and tune it in so that you may  
watch video tapes. If you have used a SCART then  
your TV should already have a dedicated video  
channel built into it, usually called AV.  
Press 1/+ on the front of your DVD+VCR when  
you have finished.  
Tune this channel so that a bright blue screen  
appears.  
Store this channel on your TV.  
1. Make sure that you have correctly installed your  
DVD+VCR as described earlier in this book.  
Press 1/+ to turn on your DVD+VCR.  
Turn on your TV.  
Notes:  
Make sure that you have correctly installed your DVD+VCR  
and successfully tuned in a dedicated video channel on your  
TV. If you do not tune in a dedicated video channel on your  
TV you will be unable to view and record video tapes!  
2. Insert a pre-recorded video tape into your  
DVD+VCR and press N on the remote control.  
Select a TV channel which you wish to watch  
video.  
Using your VCR for the very  
first time  
Don’t worry if you don’t have a video-tape to play  
at this stage! If you switch your DVD+VCR on and  
continue stages 3 ~ 4, instead of seeing video  
playback tune your TV until you see a bright blue  
screen.  
Following picture will display on the TV screen  
when you have just connected your video  
recorder for the very first time.  
3. Tune this channel until the video picture is sharp  
and the sound is clear.  
To make tuning TV stations, please follow stages  
3 to 4 as shown "ACMS" (see p.14).  
If you have used a SCART or AUDIO and VIDEO  
cables you will not have to tune your TV, simply  
select the AV channel. The AV channel is already  
pre-tuned for optimum video playback on your TV.  
4. Store this channel on your TV.  
You will need to look at the TV instruction book if  
you do not know how to do this.  
ACMS  
Pr-12  
OK  
i
ACMS  
5. Only carry out stages 5 ~ 8 if you cannot  
obtain clear video playback as described in  
stages 1 ~ 4.  
Select a TV channel which you wish to watch  
video.  
Make sure that your DVD+VCR is in standby  
pressing 1/+ on the remote control (only the clock  
will be displayed).  
6. Press PROG. (-/+) on the front of your DVD+VCR  
for more than 4 seconds.  
RF36 will appear in the display window.  
The following picture will be displayed on the TV  
screen.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the clock Manually  
To set the colour system  
The clock in your VCR controls time and date  
settings for your VCR.  
1. Press i.  
2. The main menu will appear on the TV screen.  
The clock is set automatically during ACMS  
(Automatic Channel Memory System) when your  
VCR detects a channel that broadcasts a  
Teletext signal. If the broadcast signal is weak  
the clock will not be set and will require setting  
manually.  
3. Press 1 or 2 to select the SYS and press OK.  
4. Press 3 or 4 to select according to the COLOUR  
system used.  
1. Press i.  
Press 1 or 2 to select SET.  
Press OK.  
The ACSS mode can be set to “OFF” by pressing  
AUTO  
PAL  
SYS  
MESECAM  
SYS  
f
OSD  
ON  
OFF  
i
OK if you want to set the time manually.  
5. Press 1 or 2 to select the RF AUDIO.  
Press 3 or 4 to select according to the RF AUDIO  
used.  
HH MM DD MM YY  
:
-
-
.
.
- - - - -  
- -  
- -  
- -  
ACSS  
:
ON  
OK  
1
2
i
SET  
RF-I/I  
RF-B/G
2. Use the v or V on the remote control to alter the  
HOURS, MINUTES, DAY, MONTH and YEAR.  
Please note your VCR uses a 24 hour clock. e.g.  
1pm will be displayed as 13:00.  
SYS  
RF-D/K  
SYS  
f
OSD  
ON  
OFF  
i
6. Press i to remove the menus from the TV screen.  
The day of the week will appear automatically  
when you enter the year.  
3. If you make a mistake press 1 or 2 and enter the  
correct details.  
HH MM DD MM YY  
8
:
00  
1
.
01  
.
05 SAB  
ACSS  
:
SPE.  
OK  
1
2
i
SET  
4. Press i to return to a TV picture.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to using the main menu  
Tuning in TV Stations  
Automatically  
This DVD+VCR can easily be programmed by  
using the menus displayed on screen.  
The menus are controlled from the Remote  
Control Handset.  
If the TV broadcast signal is weak your VCR  
may not detect the necessary information and  
will not be able to store them correctly. To overcome  
this problem please turn to the MANUAL TUNING  
section on page 15.  
1. Switch on your TV set and video recorder by  
pressing the 1/+ button.  
2. Press i button.  
1. Press 1/+ to turn on your DVD+VCR.  
The main menu will appear on the TV screen.  
2. Press i button.  
The main menu will appear on the TV screen.  
Press 1 or 2 to select the ACMS.  
Press OK.  
1
2
SET SYS  
f
OSD  
ON  
OFF  
1
2
Pr-12  
ACMS  
ACMS SET SYS  
Pr-12  
ACMS  
f
OSD  
ON  
OFF  
REC - Timer recording setting (see p. 25).  
PR SET - Manual tuning setting (see p. 15).  
ACMS - ACMS (Automatic Channel Memory  
System) (see p. 14).  
SET - Date & clock setting (see p. 13).  
SYS - To set the Colour TV System (see p. 13).  
Pr-12  
OK  
i
OK  
i
ACMS  
4. Press OK to again to start the automatic tuning  
process.  
01  
02  
03  
C02  
C03  
C04  
00  
00  
00  
BBC1  
BBC2  
ITV  
(Dr.) - To check a problem with your VCR  
(see p. 36).  
F.OSD ON/OFF - To display the operational  
mode of your VCR  
S
E
Pr-12  
i
ACMS  
(see p. 36).  
5. The TV STATION TABLE will appear when tuning  
is completed.  
(16:9/4:3) - To select the aspect ratio of your  
TV (see p. 37).  
Press i to save your settings.  
DECODER - To use a pay-TV decoder (or  
Satellite) with your VCR  
01  
02  
03  
04  
05  
06  
07  
08  
C02  
C03  
C04  
C05  
C06  
- -  
00  
00  
00  
00  
00  
- -  
BBC1  
BBC2  
ITV  
CH4  
CH5  
- - - - -  
- - - - -  
- - - - -  
(see p. 37).  
(OPR) - To improve the playback picture  
(see p. 22).  
- -  
- -  
- -  
- -  
O
NIC - To activate or deactivate the NICAM digital  
sound (see p. 37).  
MOVE :  
DELETE :  
P
,
OK  
i
SET  
R
Tip:  
Notes:  
You can change the menu language on the DVD  
setup menu. (See the Menu Language on page 18.)  
Please note currently only a limited number of TV  
companies transmit the Programme Delivery Control  
(PDC) signal which enables your DVD+VCR to suc-  
cessfully identify and store them. If your DVD+VCR  
has difficulty in identifying a TV station please turn the  
page to find out how to manually tune in and name a  
TV station. While automatic tuning is taking place the  
time and date will set automatically.  
3. Press 1 and 2 to select the desired menu.  
Press OK and press 3 or 4 to select.  
4. Press i to remove the menus from the TV screen.  
If - - :- - appears in the DVD+VCR display it means  
that the broadcast signal is weak and the clock was  
not set. Please turn to CLOCK SET section of this  
book on page 13.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning in TV Stations Manually  
In certain areas of the country broadcast signals  
may be too weak for your DVD+VCR’s automatic  
tuning process to find or assign TV stations  
correctly.  
PR  
04  
CH  
C04  
MFT  
00  
STATION  
CHANNEL/CABLE : AV  
P
i
SET  
R
You must tune in these weaker broadcast stations  
manually in order for your DVD+VCR to store  
them.  
6. Press 2 to select STATION so that you may name  
your TV station.  
Press OK.  
1. Press i.  
7. Use 3 or 4 to select letters and numbers for the  
The main menu will appear on the TV screen.  
1 or 2 to select the PR SET.  
Press  
Press OK.  
station name.  
Use 1 or 2 to move back and forth between  
characters.  
Press OK.  
PR  
01  
CH  
C03  
MFT  
00  
STATION  
PR-03  
1
2
Pr-12  
P
ACMS  
SET  
SET SYS  
R
PR  
04  
P
CH  
C04  
MFT  
00  
STAZIONE  
-
SET  
R
f
OSD  
ON  
OFF  
CHANNEL/CABLE : AV  
P
SET  
i
R
P
SET  
OK  
i
R
2. Press i.  
The station table will appear.  
8. Press i, confirm the station placement.  
3. Press 3 or 4 to select the programme number that  
you want to tune (for example, PR 04).  
PR  
04  
CH  
C04  
MFT  
00  
STAZIONE  
PR-04  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
C03  
- -  
- -  
- -  
00  
00  
00  
- -  
- -  
- -  
- -  
- -  
PR-01  
PR-02  
PR-03  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
P
SET  
OK  
i
R
- -  
- -  
MOVE :  
DELETE :  
If you wish to manually tune other stations repeat  
P
SET  
,
OK  
i
R
stages 3 - 8.  
4. Press OK.  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
C03  
C04  
- -  
- -  
- -  
- -  
00  
00  
00  
00  
- -  
- -  
- -  
- -  
PR-01  
PR-02  
PR-03  
PR-04  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
Press AUX to select C (Standard stations) or S  
(Cable stations):  
C02 - C69, S01 - S41.  
Enter the channel number of station that you want  
SPOSTA:  
CANCELLA:  
to tune, use 3 or 4 to find the required station.  
P
SET  
,
OK  
i
R
9. Press i again.  
Your new TV station has now been tuned into your  
DVD+VCR.  
PR  
04  
CH  
C - -  
MFT  
- -  
STATION  
- - - -  
CHANNEL/CABLE : AV  
P
SET  
i
R
5. Searching will stop when it locates a stations.  
Press 2 to select MFT.  
Control the fine tuning of the station by using 3 or  
4.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the order of TV Stations  
Deleting TV Stations  
After tuning TV stations into your VCR you may  
wish to change the order in which they are  
stored without having to retune them against!  
After tuning TV stations into your VCR you may  
wish to delete a station.  
how you can easily delete any unwanted TV  
The instructions given on this page will show you stations.  
how you can simply move them into your desired  
order.  
1. Press i.  
The main menu will appear on the TV screen.  
Press 1 or 2 to select the PR SET.  
Press OK.  
1. Press i.  
The main menu will appear on the TV screen.  
Press 1 or 2 to select the PR SET.  
Press OK.  
PR  
01  
CH  
C03  
MFT  
00  
STATION  
PR-03  
1
2
Pr-12  
P
ACMS  
SET  
SET SYS  
R
P
SET  
R
f
OSD  
ON  
OFF  
CHANNEL/CABLE : AV  
PR  
01  
CH  
C03  
MFT  
00  
STATION  
PR-03  
P
SET  
i
R
1
2
Pr-12  
P
ACMS  
SET  
SET SYS  
R
P
SET  
R
f
OSD  
ON  
OFF  
CHANNEL/CABLE : AV  
2. Press i.  
P
SET  
i
R
3. Press 3 or 4 to select the programme number  
2. Press i.  
you want to delete. (for example, PR 01)  
Press 3 or 4 to select the programme number  
you want to move (for example, PR 03).  
Press 2.  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
C04  
- -  
C03  
- -  
00  
00  
00  
- -  
00  
- -  
- -  
- -  
PR-01  
PR-02  
PR-04  
- - - - -  
PR-03  
- - - - -  
- - - - -  
- - - - -  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
C03  
C04  
- -  
- -  
- -  
- -  
00  
00  
00  
00  
- -  
- -  
- -  
- -  
PR-01  
PR-02  
PR-03  
PR-04  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
C03  
C04  
- -  
- -  
- -  
- -  
00  
00  
00  
00  
- -  
- -  
- -  
- -  
PR-01  
PR-02  
PR-03  
PR-04  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- -  
- -  
MOVE :  
DELETE :  
P
,
OK  
i
SET  
R
4. Press 1.  
MOVE :  
DELETE :  
OK  
i
P
P
SET  
SET  
,
OK  
i
R
R
After a short while, the selected station will be  
deleted.  
3. Press 3 or 4 to select the programme number  
If you wish to delete other TV stations repeat  
stages 3 - 4.  
you want to move to (for example, PR 05).  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
C04  
- -  
C03  
- -  
00  
00  
00  
- -  
00  
- -  
- -  
- -  
PR-01  
PR-02  
PR-04  
- - - - -  
PR-03  
- - - - -  
- - - - -  
- - - - -  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
- -  
C03  
- -  
- -  
- -  
- -  
00  
00  
- -  
00  
- -  
- -  
- -  
- -  
PR-02  
PR-04  
- - - - -  
PR-03  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- -  
- -  
MOVE :  
DELETE :  
OK  
i
P
SET  
R
P
,
OK  
i
SET  
R
4. Press OK.  
5. Press i to remove the menus from the TV screen.  
The selected programme will be moved to the  
new programme number.  
If you wish to move other TV stations repeat  
stages 1 - 4.  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
C04  
- -  
C03  
- -  
00  
00  
00  
- -  
00  
- -  
- -  
- -  
PR-01  
PR-02  
PR-04  
- - - - -  
PR-03  
- - - - -  
- - - - -  
- - - - -  
- -  
- -  
MOVE :  
DELETE :  
P
,
OK  
i
SET  
R
5. Press i to remove the menus from the TV screen.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation-DVD part  
Example: On-Screen Display during  
playing DVD Video  
On-Screen Display  
You can display the general playback status on the TV  
screen. Some items can be changed using the menu.  
To use the on-screen display:  
Items  
Selection Method  
b
/
B
ENTER  
, Numbers  
Title Number  
1 / 3  
1. Press DISPLAY during playback.  
b
/
B
ENTER  
, Numbers  
Chapter Number  
Time search  
1 / 12  
2. Press v / V to select an item.  
The selected item is highlighted.  
Numbers, ENTER  
0:20:09  
3. Press b / B to change the setting. You can also  
use the number buttons if appropriate (e.g.  
inputting the title number). For some functions,  
press ENTER to execute the setting.  
Audio language  
and Digital Audio  
Output mode  
b
/
B
or  
A.MONITOR  
b
/
B
or  
Subtitle language  
Angle  
ABC  
1 ENG  
1 / 3  
SUBTITLE  
Notes:  
Some discs may not provide all of the features  
shown below.  
b
ANGLE  
/
B
or  
3D SUR  
Sound  
• If no button is pressed for 10 seconds, the  
on-screen display disappears.  
b
/
B
Playback Status/Restrictions  
Example: On-Screen Display during  
playing VCD  
Title  
Repeat title  
A - B  
Repeat sequence  
Items  
Selection Method  
1 / 9  
Enter a Marker  
b
/
B, Numbers  
ENTER  
Track Number  
(or PBC mode)  
1 / 3  
MARKER SEARCH  
Marker Search menu  
1
2
3
4
5
6
7
8
9
Numbers  
ENTER  
Time search  
0:20:09  
Resume play from this point  
b
/
B
or  
Action prohibited or not available  
Audio Channel  
Sound  
STEREO  
3D SUR  
A.MONITOR  
b
/
B
Example: On-Screen Display during  
playing divx movie disc  
Items  
Selection Method  
b
/
B
ENTER  
, Numbers  
Track Number  
1 / 3  
Numbers, ENTER  
Time search  
0:20:09  
Audio language  
and Digital Audio  
Output mode  
1
b
/
B
or  
MP3  
A.MONITOR  
b
/
B
or  
Subtitle language  
Sound  
ENG  
ABC  
SUBTITLE  
3D SUR  
b
/
B
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LANGUAGE  
Initial Settings  
LANGUAGE  
By using the Setup menu, you can make various  
adjustments to items such as picture and sound. You  
can also set a language for the subtitles and the  
Setup menu, among other things. For details on each  
Setup menu item, see pages 18 to 21.  
English  
Original  
Off  
Menu Language  
Disc Audio  
Disc Subtitle  
Disc Menu  
Original  
To display and exit the Menu:  
Move  
Select  
Press SETUP MENU to display the menu. A second  
press of SETUP MENU will take you back to initial  
screen.  
Menu Language  
Select a language for the Setup menu and on-screen  
display.  
To go to the next level:  
Press B on the remote control.  
To go back to the previous level:  
Press b on the remote control.  
DVD  
Disc Audio / Subtitle / Menu  
Select the language you prefer for the audio track  
(disc audio), subtitles, and the disc menu.  
General Operation  
Original: Refers to the original language in which the  
disc was recorded.  
1. Press SETUP MENU. The Setup menu appears.  
2. Use v / V to select the desired option then press  
B to move to the second level. The screen shows  
the current setting for the selected item, as well as  
alternate setting(s).  
Other: To select another language, press number  
buttons then ENTER to enter the corresponding 4-digit  
number according to the language code list in the  
reference chapter. If you enter the wrong language code,  
press CLEAR  
(
).  
3. Use v / V to select the second desired option then  
press B to move to the third level.  
4. Use v / V to select the desired setting then press  
ENTER to confirm your selection. Some items  
require additional steps.  
5. Press SETUP MENU or N to exit the Setup  
menu.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISPLAY  
AUDIO  
DISPLAY  
Each DVD disc has a variety of audio output options.  
Set this unit AUDIO options according to the type of  
audio system you use.  
TV Aspect  
16  
:
9
Display Mode  
Widescreen  
AUDIO  
Dolby Digital  
DTS  
Bitstream  
Bitstream  
PCM  
MPEG  
Move  
Select  
Sample Freq.  
DRC  
48KHz  
On  
DVD  
TV Aspect  
Vocal  
On  
4:3 : Select when a standard 4:3 TV is connected.  
16:9 : Select when a 16:9 wide TV is connected.  
Move  
Select  
DVD  
DivX  
Dolby Digital / DTS / MPEG  
DVD  
Display Mode  
Bitstream: Select “Bitstream” if you connect the  
DVD Player’s DIGITAL OUT jack to an amplifier or  
other equipment with a Dolby Digital, DTS or  
MPEG decoder.  
Display Mode setting works only when the TV Aspect  
mode is set to “4:3”.  
LetterBox: Displays a wide picture with bands on the  
upper and lower portions of the screen.  
PCM (for Dolby Digital / MPEG): Select when  
connected to a two-channel digital stereo amplifier.  
DVDs encoded in Dolby Digital or MPEG will be  
automatically downmixed to two-channel PCM  
audio.  
Panscan: Automatically displays the wide picture on the  
entire screen and cuts off the portions that do not fit.  
Off (for DTS): If you select “Off”, the DTS signal is  
not output through the DIGITAL OUT jack.  
DVD  
Sample Freq. (Frequency)  
If your receiver or amplifier is NOT capable of han-  
dling 96 kHz signals, select 48 kHz. When this choice  
is made, this unit automatically converts any 96 kHz  
signals to 48 kHz so your system can decode them.  
If your receiver or amplifier is capable of handling 96  
kHz signals, select 96 kHz. When this choice is made,  
this unit passes each type of signal through without  
any further processing.  
Check the documentation for your amplifier to verify  
its capabilities.  
DVD  
DivX  
Dynamic Range Control (DRC)  
With the DVD format, you can hear a program’s  
soundtrack in the most accurate and realistic presen-  
tation possible, thanks to digital audio technology.  
However, you may wish to compress the dynamic  
range of the audio output (the difference between the  
loudest sounds and the quietest ones). This allows  
you to listen to a movie at a lower volume without  
losing clarity of sound. Set DRC to On for this effect.  
Vocal DVD  
Set to On only when a multi-channel karaoke DVD is  
playing. The karaoke channels on the disc mix into  
normal stereo sound.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHERS  
DivX(R) VOD DivX  
The PBC, Auto Play and DivX(R) VOD settings can be  
changed.  
You can display the DivX DRM (Digital Rights  
Management) Registration code for your unit only.  
OTHERS  
PBC  
On  
Off  
DivX(R) Video On Demand  
Auto Play  
Your registration code is : XXXXXXXX  
DivX(R) VOD  
Select  
To learn more visit  
(Done)  
Select  
Move  
The Registration code is used for VOD (Video-On-  
Demand) service agent. You can purchase or rent an  
encrypt move file.  
PBC VCD  
Set Playback Control (PBC) to On or Off.  
Notes:  
On: Video CDs with PBC are played according to the  
PBC.  
If you rent the DivX VOD file, it has several options of  
viewing limits as shown below.  
Off: Video CDs with PBC are played the same way as  
Display the number which you can watch the file.  
Audio CDs.  
DVD  
Auto Play  
View DivX(R) VOD Rental  
This rental has 3 views left.  
You can set up the DVD Player so a DVD disc auto-  
matically starts playing whenever the DVD is inserted.  
If Auto Play mode is set to On, this DVD player will  
search for title that has the longest playback time and  
then play back the title automatically.  
Do you want to use one  
of your 3 views now?  
(Yes) (No)  
On: Auto Play function is active.  
Off: Auto Play function is not active.  
The rental has been expired.  
Notes:  
The Auto Play function may not work for some DVDs.  
Rental Expired  
(Done)  
Display the authorization error.  
Authorization Error  
This player is not authorized  
to play this video.  
(Done)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Password (Security Code)  
LOCK (Parental Control)  
You can enter or change password.  
LOCK  
Rating  
Unlock  
New  
1. Select Password on the LOCK menu then press B.  
Password  
Area Code  
SE  
G B  
2. Follow step 2 as shown left (Rating). “Change” or  
“New” is highlighted.  
3. Enter the new 4-digit code, then press ENTER.  
Input it again to verify.  
Move  
Select  
4. Press SETUP MENU to exit the menu.  
DVD  
Rating  
If you forget your Security Code  
Some movies contain scenes that may not be suitable  
for children to view. Many of these discs contain  
parental control information that applies to the  
complete disc or to certain scenes on the disc. Movies  
and scenes are rated from 1 to 8, depending on the  
country. Some discs offer more suitable scenes as an  
alternative.  
If you forget your security code you can clear it using  
the following steps:  
1. Press SETUP MENU to display the Setup menu.  
2. Input the 6-digit number “210499” and the security  
code is cleared.  
The parental control feature allows you to block  
access to scenes below the rating you input, there by  
preventing your children from being able to view  
material you believe is unsuitable.  
3. Enter a new code as described above.  
DVD  
Area Code  
Enter the code of the country/area whose standards  
were used to rate the DVD video disc, based on the  
list in the reference chapter.  
1. Select “Rating” on the LOCK menu then  
press B.  
2. To access the Rating, Password and Country Code  
features, you must input the 4-digit security code  
you created. If you have not yet entered a security  
code you are prompted to do so.  
1. Select “Area Code” on the LOCK menu then  
press B.  
2. Follow step 2 as shown left (Rating).  
Input a 4-digit code and press ENTER. Enter it  
again and press ENTER to verify. If you make a  
mistake before pressing ENTER, press CLEAR  
3. Select the first character using v / V buttons.  
4. Press ENTER and select the second character  
(
).  
using v / V buttons.  
5. Press ENTER to confirm your country code  
selection.  
3. Select a rating from 1 to 8 using the v / V buttons.  
Rating 1-8: Rating one (1) has the most restric-  
tions and rating eight (8) is the least restrictive.  
Unlock  
If you select unlock, parental control is not active  
and the disc plays in full.  
Notes:  
If you set a rating for the player, all disc scenes with  
the same rating or lower are played. Higher rated  
scenes are not played unless an alternate scene is  
available on the disc. The alternative must have the  
same rating or a lower one. If no suitable alternative is  
found, playback stops. You must enter the 4-digit  
password or change the rating level in order to play  
the disc.  
4. Press ENTER to confirm your rating selection, then  
press SETUP MENU to exit the menu.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Logic search:  
Playing a tape  
During fast forwarding or rewinding press and hold  
m or M the picture will be played back at 7 times  
normal playback speed.  
5. Slow motion playback, Shuttle :  
During playing back or still picture press F or G.  
You can reach the following playback speeds.  
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,  
7xplay)  
You will only be able to load and eject video cassettes  
when your DVD+VCR is plugged into the mains.  
Your DVD+VCR may also playback recordings from  
NTSC tapes (on PAL TV).  
Getting a better picture  
When a cassette is inserted and playback started, the  
automatic tracking function works to get the best possi-  
ble picture automatically. If the quality of the recording is  
poor, repeatedly press 3 or 4on the remote control to  
manually adjust the tracking until any distortions have  
been removed.  
To switch off the slow motion and shuttle, press the  
desired function.  
During slow motion and shuttle, the noise bars  
may appear on the picture according to the status  
of tape.  
1. Make sure that you have correctly connected your  
DVD+VCR as described earlier in this book.  
Turn on your TV.  
If distortions can be seen in the picture, reduce  
them with v or V.  
6. Press 9to end playback.  
Press EJECT ( ).  
Press 1/+ to turn on your DVD+VCR.  
Insert the video cassette into your DVD+VCR.  
The video cassette should have the window side  
facing up and the arrow facing away from you.  
If the end of the tape is reached, your DVD+VCR  
will stop playback automatically, rewind, stop, eject  
the tape.  
2. Press N to start playing your tape.  
If you load a video cassette which has had its  
record protection tab removed, playback of the  
cassette will start automatically.  
CM (Commercial Message) Skip:  
This feature enables you during playback of a tape to  
skip a commercial break in a few seconds, then  
resume normal playback.  
AUTO TRACKING  
Your DVD+VCR will automatically adjust the  
tracking to give the best picture quality.  
If noise bars appear during playback, adjust the  
tracking manually by pressing PR/TRK (-/+).  
While tape is playing press  
on the remote control  
to skip commercial (or another programme material).  
Repeatedly press  
to skip:  
1 Press 30 seconds  
2 Press 60 seconds  
3 Press 90 seconds  
4 Press 120 seconds  
5 Press 150 seconds  
6 Press 180 seconds  
3. Press X to still a picture. Press X repeatedly to  
advance the tape frame by frame.  
If you press M, the picture will be slowed down  
at about 1/19 times the normal playback.  
Tapes can be paused for up to 5 minutes. After 5  
minutes your DVD+VCR will stop the tape to  
prevent damaging the tape or your DVD+VCR .  
Still picture quality can be improved slightly by  
using v or V.  
OPR (Optimum Picture Response)  
This feature automatically improves playback picture  
quality by adjusting your DVD+VCR to the condition of  
the tape. Please note that the OPR icon ( ) will only  
appear in play that mode when playing a tape.  
4. Press N to continue playing your tape.  
Double speed playback  
Press the "N (X2)" button during normal  
playback. The tape will play back at double speed  
and without sound.  
Press the "N (X2)" button to return to playback at  
normal speed  
1. Press i.  
2. Press 1 or 2 to select ( ) OPR.  
3. Press OK.  
4. Press 3 or 4repeatedly to select: OFF, SOFT or  
SHARP.  
Picture search:  
Please note you may only set OPR when  
playing a tape.  
During playing back press either m or M to this  
will enable you to rapidly wind the tape (7 times  
normal playback) see where you are on the tape.  
5. Press i return to screen.  
Notes:  
When playing back tapes that have been overrecorded  
with new content, the original audio may be audible  
during auto tracking.  
The image may be distorted during special playback in  
LP mode.  
OFF  
SOFT  
Pr-12  
P
ACMS  
SET  
S
SHARP  
R
f
OSD  
ON  
OFF  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Press X to avoid recording unwanted scenes.  
Press X to continue recording.  
Instant Timer Recording  
Your DVD+VCR allows you to make recordings  
using a variety of simple methods:  
Tapes can be paused for up to 5 minutes; RECP  
will be displayed when a tape is paused. After 5  
minutes your DVD+VCR will stop recording to  
prevent damaging the tape or your DVD+VCR.  
Instant Timer Recording start recording  
immediately for a set period of time or until the  
video cassette runs out.  
8. Press x to end recording.  
Press EJECT ( ).  
Your DVD+VCR incorporates Long Play (LP)  
which enables you to record up to twice the  
amount of time on a video cassette. For example  
an E-180 will record up to 180 minutes using  
Standard Play (SP); using LP you will be able to  
record up to 360 minutes. Please note there will  
be a slight loss in picture and sound quality when  
using LP.  
Notes:  
If you do not wish to record on a tape (this can hap-  
pen quite easily by accident!) remove the protection  
tab on the back edge of the video cassette.  
It is possible to record on a video cassette with the  
record protection tab removed by covering the hole  
with self adhesive tape.  
Remember you can record one programme while  
watching another by starting your instant recording,  
press TV/VCR to select TV mode and then select-  
ing a different channel on your TV.  
1. Make sure that you have correctly connected  
your DVD+VCR as described earlier in this book.  
Press 1/+ to turn on your DVD+VCR.  
2. Insert a video cassette with protection tab into  
your DVD+VCR.  
The video cassette should have the window side  
facing up and the arrow facing away from you.  
3. Press 3or 4 to select the programme number  
you wish to record.  
You may also directly select programme number  
using the numbered buttons on the remote con-  
trol.  
4. If you wish to record directly from the SCART or  
RCA jacks, repeatedly press AUX until the sock-  
et you wish to record from is displayed.  
AV 1 for recording from EURO AV1 SCART jacks  
on the rear of your unit.  
AV 2 for recording from EURO AV2 SCART jacks  
on the rear of your unit.  
AV 3 for recording from VIDEO IN and AUDIO IN  
(Left & Right) jacks on the front of your unit.  
5. Press  
if you wish to record in Long Play or  
Standard Play.  
SP will produce improved picture and sound  
quality, however LP will provide twice as much  
recording time as SP.  
6. Press REC (z) on the remote to start record-  
ing.  
Press z on your unit or press REC (z) on the  
remote several times. Each successive press will  
increase the record time by 30 minutes until you  
reach a maximum of 9 hours.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Press F or G to select the settings that you wish to  
revise. (PR, DATE, TIME VPS/PDC and SP).  
Press D or E to enter the correct information.  
VIDEO Plus+ Programming  
VIDEO Plus+ greatly simplifies entering the date,  
channel, start and end times of a Timer Recording  
by simply entering VIDEO Plus+ Code. VIDEO  
Plus+ Codes are published in most TV guide mag-  
azines; they can vary one to nine numbers in  
length.  
PR  
DATE  
TIME  
PR-01 12  
10:11~11:55  
- -: - -~ - -: - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
SP  
SP  
SP  
SP  
SP  
SP  
SP  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
i
1. Make sure that TV channels have been tuned and  
stored in correct VIDEO Plus+ order.  
Insert a video cassette with protection tab into your  
DVD+VCR.  
6. Press G to select the recording speed.  
Press D or E to select the desired tape speed  
(SP, IP, or LP).  
IP mode determines how much tape is left and  
switches speed from SP to LP, if necessary, to  
complete recording the program.  
IP mode is not selected when VPS/PDC is ON.  
Check that the timer event details are correct.  
If you wish to record from AUDIO IN and VIDEO IN  
on the front or from either of the EURO SCART  
sockets on the back of VCR, press AUX to select for  
correct display (AV1, AV2 or AV3).  
VIDEO PLUS+ CODE NO.  
- - - - - - - - -  
0~9, OK  
i
REC  
2. Press VIDEO Plus+.  
3. Press the numbered buttons to enter the  
PlusCode of the TV programme that you wish to  
record.  
PR  
DATE  
TIME  
PR-01 12  
10:11~11:55  
- -: - -~ - -: - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
SP  
SP  
SP  
SP  
SP  
SP  
SP  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
If you make a mistake press F then enter the  
revised number.  
i
7. If you want to make another VIDEO Plus+  
recording repeat stages 2 - 7.  
Press i twice.  
VIDEO PLUS+ CODE NO.  
246876543  
DELETE :  
0~9,  
OK  
i
REC  
If PLEASE CHECK is displayed, you have entered  
incorrect information and will need to re-enter the  
data.  
Press 1/I to switch your DVD+VCR power off  
mode.  
4. Press OK.  
If PLEASE CHECK is displayed it means that you  
have entered the wrong VIDEO Plus+ numbers,  
entered the VIDEO Plus+ numbers incorrectly.  
If “- -” is displayed, you have to enter the  
programme number of the station, you want to  
record from.  
will appear in the video recorder’s display while  
your VCR waits to make the recording.  
To watch a DVD during timer recording standby  
mode, press 1/I and DVD to switch to DVD mode.  
8. Press 1/I to end recording.  
PR  
PR-01 12  
DATE  
TIME  
10:11~11:55  
- -: - -~ - -: - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
SP  
SP  
SP  
SP  
SP  
SP  
SP  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
Notes:  
Programme Delivery Control (PDC)  
The Programme Delivery Control (PDC) system adjusts  
the start and end times of a timer record event. This can  
be particularly useful with sports events which may run  
over into extra time. The PDC signal is transmitted by  
the broadcaster and this controls your video recorder’s  
timer. Currently only a limited number of TV companies  
transmit PDC signals. Please make sure that when  
recording from channels that do not broadcast PDC that  
you turn PDC OFF.  
i
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer recording using On  
Screen Display  
PR  
PR-03  
- -  
- -  
- -  
- -  
- -  
- -  
DATE  
T
I
M
E
- -: - -~ - -: - -  
3
- -  
- -  
- -  
- -  
- -  
- -  
SP  
- -: - -~ - -: - - SP  
- -: - -~- - : - - SP  
- -: - -~- - : - - SP  
- -: - -~- - : - - SP  
- -: - -~- - : - - SP  
- -: - -~- - : - - SP  
You may set up to seven timer record events  
within one month of the current date.  
DLY SU MO TU WE TH FR SA  
i
OK  
Note:  
6. Use v/V/1/2 buttons to enter the recording start  
and end times of the programme that you wish to  
record.  
Before setting the timer make sure that you have  
set the DVD+VCR clock correctly and you know  
which stations you have tuned TV stations on  
your DVD+VCR.  
Please note your DVD+VCR uses a 24 hour clock.  
e.g. 1pm will be displayed as 13:00.  
PR  
PR-03  
- -  
- -  
- -  
- -  
- -  
- -  
DATE  
4
- -  
- -  
- -  
- -  
- -  
- -  
T I M E  
14:00~ 15:30  
- -: - -~ - -: - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
SP  
SP  
SP  
SP  
SP  
SP  
SP  
1. Insert a video cassette with protection tab into  
your DVD+VCR.  
The video cassette should have the window side  
facing up and the arrow facing away from you.  
i
2. Press i.  
Press 1 or 2 to select REC (  
Press OK.  
).  
7. Press B and press v or V to switch VPS/PDC on  
or off.  
PR  
DATE  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
T
I
M
E
- -: - -~ - -: - -  
- -: - -~ - -: - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
SP  
PR  
PR-03  
- -  
- -  
- -  
- -  
- -  
- -  
DATE  
4
- -  
- -  
- -  
- -  
- -  
- -  
T I M E  
SP  
SP  
SP  
SP  
SP  
SP  
14:00~ 15:30  
- -: - -~ - -: - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
SP  
SP  
SP  
SP  
SP  
SP  
SP  
OK  
i
,
DELETE:  
VPS/PDC  
:
ON  
i
3. Press OK to start setting the timer record event.  
8. Press B to select the recording speed.  
Press v or V to select the desired tape speed  
(SP, IP, or LP).  
4. Use the v/V to enter the station that you wish to  
record then press 2.  
IP mode determines how much tape is left and  
switches speed from SP to LP, if necessary, to  
complete recording the program. IP mode is not  
selected when VPS/PDC is ON.  
PR  
PR-03  
- -  
- -  
- -  
- -  
- -  
- -  
DATE  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
T I M E  
- -: - -~ - -: - -  
- -: - -~ - -: - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
SP  
SP  
SP  
SP  
SP  
SP  
SP  
PR  
PR-03  
- -  
- -  
- -  
- -  
- -  
- -  
DATE  
4
- -  
- -  
- -  
- -  
- -  
- -  
T I M E  
14:00~ 15:30  
- -: - -~ - -: - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
SP  
SP  
SP  
SP  
SP  
SP  
SP  
i
Note:  
If all timer record events are full press v or V to  
select the event that you wish to remove and replace.  
Press b to delete the event.  
i
5. Use the v/V to enter the date of the  
programme.  
If you press OK before entering the date you may  
select one of the following automated recording  
features.  
Press 1 or 2 to select, then press OK to confirm.  
DLY To record every day (except Saturday and  
Sunday) at the same time.  
SU~SA To record at the same time every week.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer recording using On  
Screen Display (Continued)  
9. Press i to set another timer record event and  
follow steps 3 to 8.  
Check that the timer event details are correct.  
Press i return to screen.  
If PLEASE CHECK is displayed, you have entered  
incorrectly and will need to re-enter the data.  
10. Press 1/+ to switch your DVD+VCR to Timer  
Standby mode.  
The timer symbol ( ) will appear in the display  
window while your DVD+VCR waits to make the  
recording.  
11. Press 1/+ to end timer recording.  
Notes:  
If you want to stop recording while recording is in  
progress, press 1/+ to stop recording.  
The DVD+VCR will automatically power off when  
Timer Recording ends.  
During timer recording standby mode, the DVD and  
VCR mode cannot be operated. To use the  
DVD+VCR, press 1/+ . After you use the DVD or  
VCR, press 1/+ again to put the VCR into timer  
recording standby mode.  
If at a later date you wish to delete or change any  
of the settings in timer event memory you may do  
so without having to enter all the timer event infor-  
mation again. Simply display the timer event screen.  
Use v or V to select the event that you wish to  
delete or change.  
Press b to delete the event...or  
Press OK to change; then press b or B to select;  
Station, Date, Start and End times and  
recording speed. Press v or V to enter the correct  
information.  
If Timer record events Overlap...  
Make sure that the preset times of the timer  
recording events do not overlap. If they do, the  
earlier programme will always be given priority.  
Example:  
Programme 1 is programmed to start at 16:00 and  
end at 17:00.  
Programme 2 is programmed to start at 16:30 and  
end at 17:30.  
(In this case, Programme 1 will be recorded in its  
entirety, but only the last 30 minutes of Programme  
2 will be recorded.)  
To watch a DVD while performing a timer recording,  
press DVD to select DVD mode.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Features  
Playing a DVD or Video CD  
Note:  
Playback Setup  
Unless stated otherwise, all operations described use  
the remote control. Some features may also be  
available on the Setup menu.  
1. Turn on the TV and select the video input source  
connected to the DVD player.  
2. Turn on the audio system (if applicable) and select  
the input source connected to the DVD player.  
DVD  
Moving to another TITLE  
3. Press OPEN/CLOSE ( ) to open the disc tray  
and load your chosen disc in the tray, with the  
playback side down.  
When a disc has more than one title, you can move to  
another title. Press DISPLAY while playback is  
stopped then the appropriate number (0-9) or use  
b / B to move to another title.  
You can play any title by inputting its number while  
playback is stopped.  
4. Press OPEN/CLOSE ( ) to close the tray.  
Playback starts automatically. If playback does not  
start, press N.  
In some cases, the disc menu might appear  
instead:  
Moving to another CHAPTER/TRACK  
DVD  
DVD  
VCD  
DivX  
Use the b B v V buttons to select the title/chapter  
you want to view, then press ENTER to start.  
Press TITLE or DISC MENU to return to the menu  
screen.  
When a title on a disc has more than one chapter or a  
disc has more than one track, you can move to  
another chapter/track as follows:  
Press . or > briefly during playback to select  
the next chapter/track or to return to the beginning  
of the current chapter/track.  
VCD  
Use the number buttons to select the track you  
want to view and press RETURN to return to the  
menu screen. Menu settings and operating  
procedures may differ. Follow the instructions on  
the each menu screen. You also may set PBC to  
Off (See “PBC” on page 20).  
Press . twice briefly to step back to the  
previous chapter/track.  
To go directly to any chapter during DVD playback,  
press DISPLAY and press v / V to select the  
chapter/track icon. Then, input the chapter/track  
number or use b / B.  
Notes:  
• If parental control is set and the disc is not within  
the rating settings you must input the password.  
(See “Lock Menu” on page 21.)  
DVD  
VCD  
DivX  
Search  
• DVDs may have a region code. Your player does  
not play discs that have a region code different from  
your player. The region code for this player is 2  
(two).  
1. Press m or M during playback.  
2. Press m or M repeatedly to select the required  
speed.  
DVD, DivX disc; X2, X4, X16 or X100  
Video CD; X2, X4 or X8  
3. To exit SEARCH mode, press N.  
Changing the Audio Channel VCD  
Press A.MONITOR repeatedly during playback to hear  
a different audio channel (Stereo, Left, or Right).  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Still Picture and Frame-by-Frame Playback  
Repeat DVD  
VCD  
DivX  
DVD  
VCD  
DivX  
You can play a title/chapter/all/track on a disc.  
Press REPEAT during playback to select a desired  
repeat mode.  
1. Press X on the remote control during playback.  
Advance the picture frame-by-frame by pressing X  
repeatedly.  
DVD Video Discs - Repeat Chapter/Title/Off  
• Chapter: repeats the current chapter.  
• Title: repeats the current title.  
2. To exit still motion mode, press N.  
• Off : does not play repeatedly.  
Slow Motion DVD  
VCD  
DivX  
Video CDs, Divx discs - Repeat Track/All/Off  
• Track : repeats the current track  
• All : repeats all the tracks on a disc.  
• Off : does not play repeatedly.  
1. Press X during playback.  
The DVD player will now go into PAUSE mode.  
2. Use m or M to select the required speed: t  
1/16, t 1/8, t 1/4, or t 1/2 (backward), or T  
1/16, T 1/8, T 1/4, or T 1/2 (forward).  
Notes:  
• On a Video CD with PBC, you must set PBC to Off on the  
setup menu to use the repeat function (See “PBC” on  
page 20).  
With a Video CD, the Slow speed changes: T  
1/16, T 1/8, T 1/4 or T 1/2 (forward).  
• If you press > once during Repeat Chapter (Track)  
3. To exit Slow Motion mode, press N.  
playback, the repeat playback cancels.  
Note:  
3D Surround DVD  
VCD  
DivX  
Slow motion playback in reverse is not possible with  
Video CDs and DivX Discs.  
To produce a 3D surround effect that simulates  
multi-channel audio from two stereo speakers (instead  
of the five+ speakers normally required for multi-chan-  
nel audio from a home theater system).  
Random VCD  
Karaoke DVD  
1. Press RANDOM during playback or in stop mode.  
The unit automatically begins random playback  
and RANDOM appears on the TV screen.  
1. Press DISPLAY during playback.  
2. Use 3 or 4 to select the sound option.  
The sound option will be highlighted.  
2. Press RANDOM again to normal.  
3. Use 1 or 2 to to select “3D SUR”.  
Tip:  
To turn off the 3D Surround effect, select “Normal”.  
By pressing > during random playback, the unit selects  
another title (track) and resumes random playback.  
Time Search DVD  
VCD  
DivX  
Note:  
To start playing at any chosen time on the disc:  
On a Video CD with PBC, You must set PBC to Off on the  
setup menu to use the random function (See “PBC” on page  
20).  
1. Press DISPLAY during playback. The time search  
box shows the elapsed playing time.  
2. Press v / V to select the time clock icon and  
“-:--:--” appears.  
Repeat A-B DVD  
VCD  
DivX  
3. Input the required start time in hours, minutes, and  
seconds from left to right. If you enter the wrong  
To repeat a sequence.  
1. Press REPEAT A-B at your chosen starting point. “  
A * ” appears briefly on the TV screen.  
numbers, press CLEAR (  
) to remove the num-  
bers you entered. Then input the correct numbers.  
4. Press ENTER to confirm. Playback starts from the  
selected time.  
2. Press REPEAT A-B again at your chosen end  
point.  
“A B” appears briefly on the TV screen and the  
repeat sequence begins.  
3. Press REPEAT A-B again to cancel.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special DVD Features  
Zoom DVD  
VCD  
DivX  
Checking the contents of DVD discs: Menus  
DVDs may offer menus that allow you to access  
special features. To use the disc menu, press DISC  
MENU. Input the corresponding number or use the b  
B v V buttons to highlight your selection. Then press  
ENTER.  
Use zoom to enlarge the video image.  
1. Press ZOOM during playback or still playback to  
activate the Zoom function. The square frame  
appears briefly in the right bottom of the picture.  
2. Each press of the ZOOM button changes the TV  
screen in the sequence: 100% size 400% size  
1600% size screen fit mode 100% size  
Title Menu DVD  
Screen fit mode:  
1. Press TITLE. If the current title has a menu, the  
menu appears on the screen. Otherwise, the disc  
menu may appear.  
You can change the way the image appears on  
the screen when you’re playing a DVD movie.  
Press 3/4 to select between Normal, Enhanced,  
and Maximum.  
2. The menu offers features such as camera angles,  
spoken language and subtitle options, and  
chapters for the title.  
3. Use the b B v V buttons to move through the  
zoomed picture.  
4. To resume normal playback, press ZOOM  
3. Press TITLE to exit.  
repeatedly or press CLEAR (  
) button.  
Disc Menu DVD  
Notes:  
Press DISC MENU and the disc menu is displayed.  
Press DISC MENU again to exit.  
• Zoom may not work on some DVDs.  
• Screen fit mode is available for playing the DVD  
disc, VR disc and movie file.  
Camera Angle DVD  
Marker Search DVD  
To enter a Marker  
VCD  
DivX  
If the disc contains scenes recorded at different  
camera angles, you can change to a different camera  
angle during playback. Press ANGLE repeatedly  
during playback to select a desired angle. Note that  
the number of the current angle appears on the  
display.  
You can start playback from up to nine memorized  
points. To enter a marker, press MARKER at the  
desired point on the disc. The Marker icon appears on  
the TV screen briefly. Repeat to enter up to nine  
markers.  
Changing the Audio Language DVD  
DivX  
To Recall or Clear a Marked Scene  
Press A.MONITOR repeatedly during playback to hear  
a different audio language or audio track.  
With DVD-RW discs recorded in VR mode that have  
both a main and a Bilingual audio channel, you can  
switch between Main (L), Bilingual (R), or a mix of  
both (Main + Bilingual) by pressing AUDIO.  
1. During disc playback, press SEARCH. The marker  
search menu appears on the screen.  
2. Within 10 seconds, press b / B to select a marker  
number that you want to recall or clear.  
3. Press ENTER and playback starts from the  
marked scene. Or, press CLEAR (  
marker number is erased from the list.  
) and the  
Subtitles DVD  
DivX  
4. You can play any marker by inputting its number  
on the marker search menu.  
Press SUBTITLE repeatedly during playback to see  
the different subtitle languages.  
Note:  
• The subtitle file of the DivX file is displayed only  
smi, srt and sub.  
• If there is no information or there is a code that can  
not read in the DivX file, “ 1 ” or etc. are displayed.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing an Audio CD or MP3 Disc  
MP3 disc compatibility with this player is limited  
as follows:  
• Sampling frequency: within 8 - 48 kHz (MP3)  
• Bit rate: within 8 - 320kbps (MP3)  
• The player cannot read an MP3 file that has a file  
extension other than “.mp3”.  
The DVD player can play MP3 formatted  
recordings on CD-ROM, CD-R, or CD-RW discs.  
Audio CD  
Once you insert an audio CD a menu appears on the  
TV screen. Press v / V to select a track then press  
N or ENTER and playback starts.  
• CD-R physical format should be ISO 9660  
• If you record MP3 files using software that cannot  
create a file system (eg. Direct-CD) it is  
impossible to playback MP3 files.  
AUDIO CD  
We recommend that you use Easy-CD Creator,  
which creates an ISO 9660 file system.  
• File names should have a maximum of 8 letters  
and must incorporate an .mp3 extension.  
• They should not contain special letters such as /  
? * : “ < > l etc.  
0:52:07  
1 / 12  
List  
Program  
Track1  
Track2  
Track3  
Track4  
Track5  
Track6  
Track7  
Track8  
Clear All  
PROGRAM Edit  
• The total number of files on the disc should be  
less than 650.  
MP3  
This DVD player requires discs and recordings to  
meet certain technical standards in order to achieve  
optimal playback quality. Pre-recorded DVDs are  
automatically set to these standards. There are  
many different types of recordable disc formats  
(including CD-R containing MP3 files) and these  
require certain pre-existing conditions (see above)  
to ensure compatible playback.  
1. Press v / V to select a folder, and press ENTER  
to see the folder contents.  
2. Press v / V to select a track then press N or  
ENTER. Playback starts.  
MUSIC  
0:00:00  
1 / 12  
List  
Program  
1-Music1  
2-Music2  
3-Music3  
4-Music4  
5-Music5  
6-Music6  
7-Music7  
Customers should note that permission is  
required in order to download MP3 files and  
music from the Internet. Our company has no  
right to grant such permission. Permission  
should always be sought from the copyright  
owner.  
Clear All  
DISPLAY Info  
PROGRAM Edit  
ID3 TAG  
• When playing a file containing information such as  
track titles, you can see the information by pressing  
DISPLAY. [ Song, Artist, Album, Comment, Genre ]  
• If there is no information, “No ID3 TAG” appear on  
the menu screen.  
Tip:  
• If you are in a file list on the MUSIC menu and want to  
return to the Folder list, use the v / V to highlight  
and  
press ENTER.  
• Press DISC MENU to move to the next page.  
• On a CD with MP3 and JPEG you can switch MP3 and  
JPEG. Press TITLE and MUSIC or PHOTO word on top of  
the menu is highlighted.  
• When playing a file containing information such as track  
titles, you can see the information by pressing DISPLAY.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD  
MP3  
Audio CD and MP3 Disc  
Features  
Random  
1. Press RANDOM during playback or when  
playback is stopped. Random Playback begins  
immediately and RANDOM appears on the menu  
screen.  
CD  
MP3  
Pause  
1. Press X during playback.  
2. To return to normal playback, press RANDOM  
repeatedly until RANDOM disappears from the  
menu screen.  
2. To return to playback, press N, ENTER or press  
X again.  
CD  
MP3  
Tip:  
Moving to another Track  
By pressing > during random playback, the unit selects  
another track and resumes random playback.  
1. Press . or > briefly during playback to go to  
the next track or to return to the beginning of the  
current track.  
CD  
Repeat A-B  
2. Press . twice briefly to go back to the previous  
1. To repeat a sequence during disc playback press  
REPEAT A-B at your chosen starting point.  
The Repeat icon and “A” appear on the menu  
screen.  
track.  
3. In case of audio CD, to go directly to any track,  
enter the track number using the numbered  
buttons (0-9).  
2. Press REPEAT A-B again at your chosen end  
point.  
CD  
MP3  
Repeat Track/All/Off  
The Repeat icon and “A-B” appear on the menu  
screen, and the sequence begins to play  
repeatedly.  
You can play a track/all on a disc.  
1. Press REPEAT when playing a disc.  
The repeat icon appears.  
3. To exit the sequence and return to normal play,  
press REPEAT A-B again. The Repeat icon  
disappears from the menu screen.  
2. Press REPEAT to select a desired repeat mode.  
• Track: repeats the current track  
• All: repeats all the tracks on a disc.  
• Off(No display): does not play repeatedly.  
CD  
3D Surround  
To produce a 3D surround effect that simulates  
multi-channel audio from two stereo speakers (instead  
of the five+ speakers normally required for  
Note:  
If you press > once during Repeat Track playback, the  
repeat playback cancels.  
multi-channel audio from a home theater system).  
1. Press A.MONITOR during playback.  
“3D SUR.” appears on the menu screen.  
CD  
MP3  
Search  
2. To return to normal playback, press A.MONITOR  
repeatedly until “3D SUR.” disappears from the  
menu screen.  
1. Press m or M during playback.  
2. Press m or M repeatedly to select the required  
speed: X2, X4, X8 backward or forward.  
3. To exit SEARCH mode, press N.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat Programmed Tracks  
Programmed Playback  
1. Press REPEAT when playing a disc. The repeat  
icon appears.  
The program function enables you to store your  
favorite tracks from any disc in the player memory.  
A program can contain 30 tracks.  
2. Press REPEAT to select a desired repeat mode.  
• Track: repeats the current track  
1. Insert a disc.  
• All: repeats all the tracks on programmed list.  
• Off(No display): does not play repeatedly.  
Audio CD or MP3 Discs:  
AUDIO CD or MUSIC menu appears.  
Note:  
If you press > once during Repeat Track playback, the  
2. Press MNL.PROG..  
repeat playback cancels.  
E
The  
mark will appear to the right of the word  
“Program” on the right side of the menu screen.  
Erasing a Track from Program List  
Note:  
1. Video CD : Press MNL.PROG. in the stop mode to  
enter Program Edit mode.  
E
Press MNL.PROG. again, then the  
mark will  
disappear to exit the Program Edit mode.  
2. Press B to move to the “Program” list.  
MUSIC  
0:00:00  
AUDIO CD  
0:52:07  
1
/
12  
1
/
12  
List  
List  
E
E
Program  
Track5  
Program  
2-Music2  
3. Use v/V to select the track that you wish to erase  
Track1  
Track2  
Track3  
Track4  
Track5  
Track7  
Track4  
Track1  
4-Music4  
1-Music1  
2-Music2  
3-Music3  
4-Music4  
5-Music5  
6-Music6  
7-Music7  
6-Music6  
1-Music1  
from the “Program” list.  
Track6  
Track7  
Track8  
4. Press CLEAR (  
tracks on the list.  
). Repeat to erase additional  
Clear All  
Clear All  
PROGRAM Edit  
DISPLAY Info  
PROGRAM Edit  
Erasing the Complete Program List  
Audio CD Menu  
MP3 Menu  
1. Follow steps 1-2 of “Erasing a Track from Program  
List” as above.  
Video CD: Press MNL.PROG. while playback is  
stopped. The program menu appears.  
Press MNL.PROG. to exit the menu.  
2. Use  
34  
to select “Clear All”, then press ENTER.  
/
The complete Program for the disc will be erased.  
Note:  
On a Video CD with PBC, you must set PBC to Off on  
the setup menu to use the programmed playback  
(See “PBC” on page 20).  
Note:  
The programs are also cleared when the disc is  
removed.  
VIDEO CD  
List  
Track1  
E
Program  
Track5  
Track2  
Track3  
Track4  
Track5  
Track2  
Track3  
Track1  
Clear All  
Video CD Menu  
3. Select a track on the “List”, then press ENTER to  
place the selected track on the “Program” list.  
Repeat to place additional tracks on the list.  
4. Press B.  
Select the track you want to start playing on the  
“Program” list.  
5. Press N or ENTER to start. Playback begins in  
the order in which you programmed the tracks.  
Playback stops after all of the tracks on the  
“Program” list have played once.  
6. To resume normal playback from programmed  
playback, select a track of CD (or MP3) list and  
then press N.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JPEG  
Viewing a JPEG Disc  
Moving to another File  
Press . or > or cursor b or B once while  
viewing a picture to advance to the next or  
previous file.  
Using this DVD Player you can view discs with JPEG  
files.  
1. Insert a disc and close the tray. The PHOTO menu  
appears on the TV screen.  
JPEG  
Zoom  
PHOTO  
Use zoom to enlarge the photo image.  
(see 29 page)  
List  
Preview  
JPEG Folder 1  
JPEG Folder 2  
JPEG Folder 3  
JPEG Folder 4  
JPEG Folder 5  
JPEG Folder 6  
JPEG Folder 7  
JPEG Folder 8  
>>>  
To rotate picture  
Press v / V during showing a picture to rotate the  
picture clockwise or counter clockwise.  
JPEG  
To listen to MP3 music watching picture  
2. Press v / V to select a folder, and press ENTER.  
A list of files in the folder appears. If you are in a  
file list and want to return to the previous Folder  
list, use the v / V buttons on the remote to  
You can display files while listening to MP3 music files  
recorded on the same disc.  
1. Insert the disc containing the two types of file in  
the player.  
highlight  
and press ENTER.  
2. Press TITLE to display PHOTO menu.  
3. If you want to view a particular file, press  
v / V to highlight a file and press ENTER or N.  
Viewing the file proceeding starts.  
3. Press v / V to select a photo file.  
4. Use B / V to select  
icon then press ENTER.  
The on-screen messages displayed with the file  
can be turned off by pressing the RETURN (Hide)  
button on the remote control.  
Playback starts. The playback will continue until  
STOP is pressed.  
While viewing a file, you can press x to move to  
the previous menu (PHOTO menu).  
Tip:  
To listen to only the desired music watching picture,  
programmed the desired tracks from the “MUSIC”  
menu and then proceed as above.  
JPEG  
Slide Show  
Use v V b B to highlight the  
(Slide Show) then  
press ENTER.  
JPEG disc compatibility with this player is  
limited as follows:  
Tip:  
• Depending upon the size and number of JPEG  
files, it could take a long time for the DVD player  
to read the disc’s contents. If you don’t see an  
on-screen display after several minutes, some of  
the files may be too large — reduce the resolution  
of the JPEG files to less than 2M pixels as 2760 x  
2048 pixels and burn another disc.  
• There are three Slide Speed options  
(Normal) and > (Slow).  
: >>> (Fast), >>  
• On a disc with MP3 and JPEG you can switch MP3 and  
JPEG. Press TITLE and MUSIC or PHOTO word on top of  
the menu is highlighted.  
• Press RETURN, information of file is hidden.  
• The total number of files and folders on the disc  
should be less than 650.  
JPEG  
Still Picture  
1. Press X during slide show.  
• Some discs may be incompatible due to a  
different recording format or the condition of disc.  
The player will now go into PAUSE mode.  
2. To return to the slide show, press N or press X  
• Ensure that all the selected files have the “.jpg”  
extensions when copying into the CD layout.  
again.  
• If the files have “.jpe” or “.jpeg” extensions, please  
rename them as “.jpg” file.  
• File names without “.jpg” extension will not be  
able to be read by this DVD+VCR. Even though  
the files are shown as JPEG image files in  
Windows Explorer.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a DVD VR format Disc  
Maintenance and Service  
This unit will play DVD-R/RW discs recorded using  
the DVD-Video format that have been finalized using  
a DVD-recorder.  
Refer to the information in this chapter before  
contacting a service technician.  
Handling the Unit  
• This unit will play DVD-RW discs recorded using  
the Video Recording (VR) format.  
When shipping the unit  
Please save the original shipping carton and packing  
materials. If you need to ship the unit, for maximum  
protection, re-pack the unit as it was originally packed  
at the factory.  
1. Insert a disc and close the tray. The DVD-VR  
menu appears on the TV screen.  
DVD-VR  
Keeping the exterior surfaces clean  
Do not use volatile liquids such as insecticide  
spray near the unit.  
Do not leave rubber or plastic products in contact  
with the unit for a long period of time. since they  
leave marks on the surface.  
2. Press v / V to select a track then press N or  
ENTER and playback starts.  
3. Press TITLE to move to the list menu.  
Cleaning the unit  
To clean the player, use a soft, dry cloth. If the  
surfaces are extremely dirty, use a soft cloth lightly  
moistened with a mild detergent solution.  
Note:  
• Unfinalized DVD-R/RW discs cannot be played in this  
player.  
• Some DVD-VR disc are made with CPRM data by DVD  
RECORDER. Player does not support these kinds of  
discs.  
Do not use strong solvents such as alcohol, benzine,  
or thinner, as these might damage the surface of the  
unit.  
What is ‘CPRM’?  
Maintaining the Unit  
CPRM is a copy protection system (with scramble system)  
only allowing the recording of ‘copy once’ broadcast  
programs. CPRM stands for Content Protection for  
Recordable Media.  
This player is CPRM compatible, which means that you  
can record copy-once broadcast programs, but you cannot  
then make a copy of those recordings. CPRM recordings  
can only be made on DVD-RW discs formatted in VR  
mode, and CPRM recordings can only be played on  
The DVD player is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty or  
worn, the picture quality could be diminished.  
Depending on the operating environment, regular  
inspection and maintenance are recommended after  
every 1,000 hours of use.  
players that are specifically compatible with CPRM.  
For details, please contact your nearest authorized  
service center.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a DivX Movie Disc  
DivX disc compatibility with this player is limited  
as follows:  
Using this DVD Player you can play DivX disc.  
• Available resolution size of the DivX file is under  
720x576 (W x H) pixel.  
1. Insert a disc and close the tray. The MOVIE menu  
appears on the TV screen.  
• The file name of the DivX subtitle is available by  
56 characters.  
MOVIE  
0:00:00  
List  
Movie Folder 1  
Movie Folder 2  
Movie Folder 3  
Movie Folder 4  
Movie Folder 5  
Movie Folder 6  
Movie Folder 7  
Movie Folder 8  
• If there is impossible code to express in the DivX  
file, it may be displayed as " _ " mark on the  
display.  
• If the number of the screen frame is over 30  
per 1 second, this unit may not operate  
normally.  
2. Press v / V to select a folder, and press ENTER.  
A list of files in the folder appears. If you are in a  
file list and want to return to the Folder list, use the  
• If the video and audio structure of recorded  
file is not interleaved, either video or audio is  
outputted.  
v / V buttons on the remote to highlight  
and  
press ENTER.  
If the file is recorded with GMC, the unit  
supports only 1-point of the record level.  
3. If you want to view a particular file, press  
GMC?  
*
v / V to highlight a file and press ENTER or N.  
GMC is the acronym for Global Motion Compensation. It  
is an encoding tool specified in MPEG4 standard. Some  
MPEG4 encoders, like DivX or Xvid, have this option.  
There are different levels of GMC encoding, usually  
called 1-point, 2-point, or 3-point GMC.  
4. Press x to exit.  
Tip:  
• Press DISC MENU to move to the next page.  
Playable DivX file  
On a CD with MP3, JPEG and MOVIE file, you can switch  
MUSIC, PHOTO and MOVIE menu. Press TITLE and  
MUSIC, PHOTO and MOVIE word on top of the menu is  
highlighted.  
z ".avi ", ".mpg ", ".mpeg "  
Playable Subtitle format  
z SubRip(*.srt/*.txt)  
• The disc subtitle may not be displayed properly, if a DivX  
subtitle is downloaded through the internet.  
SAMI(*.smi)  
SubStation Alpha(*.ssa/*.txt)  
MicroDVD(*.sub/*.txt)  
SubViewer 2.0(*.sub/*.txt)  
TMPlayer(*.txt)  
Dvd Subtitle System(*.txt)  
VobSub (*.sub) b Sub/idx, stream based format.  
• If the Disc Subtitle setup menu does not have the DivX  
Subtitile language you are going to play, the subtitle may  
not be displayed properly.  
Note:  
Playable Codec format  
If DivX Subtitle file name is not same with DivX file  
name, Subtitle will not be displayed on the screen.  
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",  
"MP43 ", "3IVX ".  
A DivX Movie file and the subtitle file must be located  
in same directory.  
Playable Audio format  
z "AC3 ", "DTS ", "PCM ", "MP3 ".  
• Sampling frequency: within 8 - 48 kHz (MP3)  
• Bit rate: within 8 - 320kbps (MP3)  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Features-VCR part  
On Screen Display  
You may easily display the current time or tape  
counter, amount of tape left, day, month, year, day of  
week, programme channel, tape speed and opera-  
tional mode of your VCR will appear on the TV  
screen. If a recording is taking place these On Screen  
Displays will not be recorded onto the tape.  
Video Doctor (Self-Diagnosis)  
This feature informs you that there is a problem with your  
DVD+VCR. These error messages will appear on the TV  
screen.  
1. Press i.  
Press 1or 2to select  
Press OK.  
.
1. Press DISPLAY to display.  
Press DISPLAY repeatedly to cycle through the  
display options. The tape counter and amount of  
tape left will appear if there is a tape loaded.  
1
2
Pr-12  
P
ACMS  
SET  
SET SYS  
R
f
OSD  
ON  
OFF  
2. After 3 seconds the majority of the On Screen  
Displays will clear leaving only the clock or tape  
counter and the amount of tape left on the screen.  
Press DISPLAY again to remove all displays from  
the TV screen.  
ANTENNA CONNECT  
HEAD STATUS  
TAPE STATUS  
NO. OF TIMER PROGRAMME  
NEXT TIMER PROGRAMME  
PLEASE CHECK  
Note:  
i
It cannot display when f.OSD is OFF.  
2. Press 3or 4to check a problem.  
ANTENNA CONNECT  
Tape Counter Memory Stop  
O PLEASE CHECK:  
Connect the aerial into the jack securely.  
The Digital Tape Counter can be displayed on the  
display window instead of the time by pressing  
DISPLAY on the remote control. The Digital Tape  
Counter indicates the relative positions of recordings  
on the tape.  
HEAD STATUS  
O PLEASE CLEAN:  
Clean your video heads.  
TAPE STATUS  
O NOT RECORDABLE:  
Insert a tape with its protection tab in place  
1. Press DISPLAY.  
Press CLEAR (  
Press N or start recording.  
The tape counter will display the actual play time  
) to set the counter to 0:00:00.  
NO. OF TIMER PROGRAMME  
O 2  
Shows the number of timer recording.  
in hours, minutes and seconds.  
NEXT TIMER PROGRAMME  
O PR-01 26 10:00~11:00 SP  
2. Press x when playback or recording is  
complete.  
Shows the current status of timer recording.  
3. Press i to remove the menus from the TV screen.  
Press m.  
The tape will rewind and automatically stop when  
the counter returns to 0:00:00.  
Note:  
To rewind to the beginning of the tape, press m  
again.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Press v/V repeatedly to select: AUTO, 4:3 or  
16:9.  
Hi-Fi Stereo Sound System  
Your VCR will record and playback Hi-Fi stereo  
sound. In addition it has a stereo NICAM digital stereo  
sound decoder. This allows you to record and playback  
the sound in several different ways. Video cassettes  
recorded on your VCR will have a normal mono audio  
track and two VHS Hi-Fi stereo audio tracks. These  
stereo tracks allow you to make audio recordings in  
Hi-Fi stereo or bilingual mode from a TV broadcast,  
stereo audio system, video disc or another Hi-Fi VCR.  
1
2
1
2
Pr-12  
Pr-12  
P
P
ACMS  
A
SET  
SET SYS  
S  
SET  
AUTO  
R
R
f
f
4:3  
OSD  
ON  
OFF  
OSD  
ON  
OFF  
16:9  
i
AUTO:  
Automatically plays back Wide-Screen  
programmes as Wide-Screen and Normal  
programmes as normal.  
1. Your VCR’s NICAM digital sound decoder allows  
you to enjoy broadcasts with NICAM sound, as  
well as standard stereo, bilingual and mono sound.  
The particular type of sound received or that  
recorded will be briefly displayed on the TV screen  
for a couple of seconds:  
4:3  
Only for playing back and recording Normal format  
recordings (4:3).  
16:9:  
Only for playing back and recording Wide-Screen  
format recordings (16:9).  
STEREO NICAM  
Sound is automatically recorded on the Hi-Fi  
stereo and mono tracks of the video tape.  
BIL NICAM  
Both audio channels will be recorded on the Hi-Fi  
stereo tracks. The primary language channel (left)  
will be recorded on the mono track of the video  
tape.  
1
2
Pr-12  
P
A
SET  
S  
AUTO  
R
f
4:3  
OSD  
ON  
OFF  
16:9  
i
MONO  
The sound is recorded on the Hi-Fi tracks and the  
mono track of the video tape without any separation.  
3. Press i to remove the menus from the TV screen.  
To enjoy Wide-Screen playback you must  
connect your VCR to the TV using a SCART  
cable.  
2. Press AUDIO repeatedly until the desired audio  
mode appears.  
3. The choice is STEREO, LEFT, RIGHT and  
MONO. In BIL NICAM playback the primary lan-  
guage is output on the left channel and the sec-  
ondary channel is output simultaneously from the  
right channel when audio output is set to  
STEREO.  
To set the decoder  
We have already described, how to connect a  
decoder for pay-TV station as CANAL+ or PREMIERE  
on page 10. For the recording of an encoded station  
you do not have to control anything. You just select  
the station and wait shortly until the decoding will  
start.  
The primary language will be output from both  
channels when the audio setting is MONO.  
Please note that when adjusting the tracking  
control Hi-Fi stereo sound may revert to MONO.  
Note:  
1. Press i.  
When OFF is selected in NIC, only mono sound will  
be output.  
The main menu will appear on the TV screen.  
Press F or G to select the DECODER.  
Press OK.  
Wide Screen Compatibility 16:9  
2. Press D or E to select.  
ON: When the decoder is connected to the AV2  
socket.  
OFF: When another VCR is connected to the AV2  
socket.  
Your DVD+VCR can record and play back wide screen  
aspect ratio programmes (16:9). To record a wide  
screen format programme successfully the correct type  
of wide screen signal must be broadcast by the TV  
station.  
3. Press i to return to a TV picture.  
1. Switch on your DVD+VCR.  
Press i.  
Press F or G to select  
Press OK.  
.
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Features  
Last Scene Memory  
Recording from another video  
recorder  
DVD  
CD  
VCD  
With this video recorder you can make recordings  
from an external source, such as copying from  
another video recorder or a camcorder.  
This player memorizes last scene from the last disc  
that is viewed. The last scene remains in memory  
even if you remove the disc from the player or switch  
off the player. If you load a disc that has the scene  
memorized, the scene is automatically recalled.  
Note:  
In the following description, this video recorder will be  
one used for recording and will be referred to as VCR  
B. The other appliance will be used for playback and  
will be referred to as VCR A.  
Note:  
This player does not memorize the scene of a disc if you  
switch off the player before commencing to play the disc.  
1. VCR A should be connected to the SCART socket  
on the rear panel of your unit or the AV sockets on  
the front panel of your unit.  
Screen Saver  
The screen saver appears when you leave the DVD  
player in Stop mode for about five minutes.  
2. Insert the recorded tape into VCR A and a blank  
tape into VCR B.  
Copying from DVD To VCR  
This unit allows you to copy the contents of a DVD to  
3. Press AUX until the socket you wish to record  
from is displayed. (VCR B)  
a VHS tape with a press of the REC (z) button.  
AV 1 for recording from EURO AV1 SCART socket  
on the rear of your unit.  
AV 2 for recording from EURO AV2 SCART socket  
on the rear of your unit.  
AV 3 for recording from VIDEO IN and AUDIO IN  
(Left & Right) sockets on the front of your unit.  
Notes:  
If the DVD you are attempting to copy is copy  
protected, you may not be able to copy the disc.  
1. Insert Disc  
Insert the disc you wish to copy in the DVD deck  
and close the disc tray.  
4. To start recording, press the REC (z) on VCR B  
and PLAY on VCR A.  
2. Insert VHS Tape  
5. When you want to finish copying, press the x on  
Insert a blank VHS videotape into the VCR deck.  
both video recorders.  
3. Copy the DVD to VHS Tape  
Press the REC (z) button.  
The DVD will go into Play mode and the VCR  
will go into Record mode.  
If the DVD disc menu appears, you may need  
to press the Play button manually to begin  
copying.  
Note:  
If you press the REC (z) button, be sure this unit in  
DVD mode.  
4. Stop the Copy Process  
When the DVD is finished playing, press x to end  
the copy.  
You must stop the Copy process manually  
when the DVD movie ends, or the unit may  
replay and record over and over again.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
Language Codes  
Use this list to input your desired language for the following initial settings:  
Disc Audio, Disc Subtitle, Disc Menu.  
Language  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Ameharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Bengali; Bangla  
Bhutani  
Bihari  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Code  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Language  
Fiji  
Finnish  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Code  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Language  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Code  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
Language  
Singhalese  
Slovak  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Code  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian  
Oriya  
Panjabi  
Pashto, Pushto  
Persian  
Polish  
Portuguese  
Quechua  
Rhaeto-Romance 8277  
Rumanian  
Russian  
Samoan  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Shona  
Tamil  
Tatar  
Hebrew  
Hindi  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Italian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Korean  
Kurdish  
Laothian  
Latin  
Latvian, Lettish  
Sindhi  
Area Codes  
Choose a area code from this list.  
Area  
Code  
AF  
AR  
AU  
AT  
Area  
Ethiopia  
Fiji  
Code  
ET  
FJ  
Area  
Code  
MY  
MV  
MX  
MC  
MN  
MA  
NP  
Area  
Saudi Arabia  
Senegal  
Singapore  
Slovak Republic  
Slovenia  
South Africa  
South Korea  
Spain  
Sri Lanka  
Sweden  
Switzerland  
Taiwan  
Thailand  
Turkey  
Code  
SA  
SN  
SG  
SK  
SI  
Afghanistan  
Argentina  
Australia  
Austria  
Belgium  
Bhutan  
Bolivia  
Brazil  
Cambodia  
Canada  
Chile  
China  
Colombia  
Congo  
Costa Rica  
Croatia  
Czech Republic  
Denmark  
Ecuador  
Egypt  
Malaysia  
Maldives  
Mexico  
Monaco  
Mongolia  
Morocco  
Nepal  
Netherlands  
Netherlands Antilles AN  
New Zealand  
Nigeria  
Norway  
Finland  
France  
Germany  
Great Britain  
Greece  
Greenland  
Islands  
Hong Kong  
Hungary  
India  
Indonesia  
Israel  
Italy  
Jamaica  
Japan  
Kenya  
FI  
FR  
DE  
GB  
GR  
GL  
HM  
HK  
HU  
IN  
ID  
IL  
IT  
JM  
JP  
BE  
BT  
ZA  
BO  
BR  
KH  
CA  
CL  
CN  
CO  
CG  
CR  
HR  
CZ  
DK  
EC  
EG  
SV  
KR  
ES  
LK  
NL  
NZ  
NG  
NO  
OM  
PK  
PA  
PY  
PH  
PL  
SE  
CH  
TW  
TH  
TR  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
Oman  
Pakistan  
Panama  
Paraguay  
Philippines  
Poland  
Portugal  
Romania  
Russian Federation RU  
Uganda  
Ukraine  
United States  
Uruguay  
Uzbekistan  
Vietnam  
KE  
KW  
LY  
Kuwait  
Libya  
Luxembourg  
PT  
RO  
El Salvador  
LU  
Zimbabwe  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting service.  
Cause  
Correction  
Refer to page 2.  
Symptom  
DVD or VCR button is not switched  
DVD or VCR do not  
work properly.  
properly.  
Plug the power cord into the wall  
The power cord is disconnected.  
No disc is inserted.  
No power.  
outlet securely.  
Insert a disc. (Check that the DVD or,  
audio CD indicator in the display  
window is lit.)  
The power is on, but  
the DVD player does  
not work.  
Select the appropriate video input  
mode on the TV so the picture from  
the DVD player appears on the TV  
screen.  
The TV is not set to receive DVD  
signal output.  
No picture.  
Connect the video cable into the jacks  
securely.  
The video cable is not connected  
securely.  
The equipment connected with the  
audio cable is not set to receive DVD  
signal output.  
Select the correct input mode of the  
audio receiver so you can listen to the  
sound from the DVD player.  
No sound.  
The audio cables are not connected  
securely.  
Connect the audio cable into the jacks  
securely.  
The power of the equipment connect-  
ed with the audio cable is turned off.  
Turn on the equipment connected  
with the audio cable.  
The Digital Audio Output is set to the  
wrong position.  
Set the Digital Audio Output to the  
correct position, then turn on the DVD  
player again by pressing 1/+.  
The disc is dirty.  
The TV channels are not tuned in properly.  
The picture is poor.  
Clean the disc.  
Check tuning, carry out tuning again.  
An unplayable disc is inserted.  
Insert a playable disc. (Check the disc  
type and Regional code.)  
The DVD player does  
not start playback.  
The disc is placed upside down.  
Place the disc with the playback side  
down.  
The disc is not placed within the  
guide.  
Place the disc on the disc tray cor-  
rectly inside the guide.  
The disc is dirty.  
Clean the disc.  
The Rating level is set.  
Cancel the Rating function or change  
the rating level.  
The remote control  
does not work properly.  
There is an obstacle in the path of the  
remote control and this unit.  
Remove the obstacle.  
The batteries in the remote control  
Replace the batteries with new ones.  
Eject the tape in.  
are exhausted.  
Is the cassette compartment empty?  
Video tape cannot be  
inserted.  
No Hi-Fi sound  
Audio mode is not set properly.  
NICAM mode is not set properly.  
Select “STEREO” by repeatedly press-  
ing “AUDIO” on the remote control.  
Make sure NICAM in the menu is set  
to AUTO for the station to be recorded.  
No NICAM sound  
recording  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specification  
General  
Power requirements  
Power consumption  
Dimensions (approx.)  
Mass (approx.)  
Operating temperature  
Operating humidity  
Timer  
AC 200-240V, 50 Hz  
17W  
430 X 78.5 X 265 mm (w/h/d)  
4.2 kg  
5˚C to 35˚C (41˚F to 95˚F)  
5 % to 90 %  
24 hours display tape  
UHF 22 - 68 (Adjustable)  
RF Modulator  
System  
Laser  
Semiconductor laser, wavelength 650 nm  
Double azimuth 6 heads, helical scanning.  
PAL  
Video Head system  
Signal system  
Frequency response  
DVD (PCM 96 kHz): 8 Hz to 44 kHz  
DVD (PCM 48 kHz): 8 Hz to 22 kHz  
CD: 8 Hz to 20 kHz  
Signal-to-noise ratio  
Harmonic distortion  
Dynamic range  
More than 100dB (ANALOG OUT connectors only)  
Less than 0.008%  
More than 100 dB (DVD)  
More than 95 dB (CD)  
Inputs (VCR)  
Audio  
-6.0dBm, more than 10 kohms (SCART)  
-6.0dBm, more than 47 kohms (RCA)  
Video  
1.0 Vp-p, 75 ohms, unbalanced (SCART/RCA)  
Outputs (DVD)  
VIDEO OUT  
Audio output (digital audio)  
1 Vp-p 75 ohms, sync negative  
0.5 V (p-p), 75 , RCA jack x 1  
Audio output (analog audio)  
2.0 Vrms (1 KHz, 0 dB), 600 , RCA jack (L, R)x2/SCART (TO TV)  
Outputs (VCR)  
Audio  
-6.0dBm, less than 1 kohms (SCART)  
1.0Vp-p, 75 ohms, unbalanced (SCART)  
Video  
Design and specifications are subject to change without notice.  
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.  
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventila-  
tion (10 cm or more on both sides, on top and at the rear).  
When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of  
these batteries must be followed strictly.  
Failure to heed the following precautions may result in damage to the unit, remote control or disc.  
1. DO NOT place the unit —  
— in an environment prone to extreme temperatures or humidity.  
— in direct sunlight.  
— in a dusty environment.  
— in an environment where strong magnetic fields are generated.  
— on a surface that is unstable or subject to vibration.  
2. DO NOT block the unit’s ventilation openings or holes.  
(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)  
3. DO NOT place heavy objects on the unit or remote control.  
4. DO NOT place anything which might spill on top of the unit or remote control.  
(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)  
5. DO NOT expose the apparatus to dripping or splashing.  
6. DO NOT use this equipment in a bathroom or places with water. Also DO NOT place any containers filled with water  
or liquids (such as cosmetics or medicines, flower vases, potted plants, cups, etc.) on top of this unit.  
7. DO NOT place any naked flame sources, such as lighted candles, on the apparatus.  
8. AVOID violent shocks to the unit during transport.  
IMPORTANT  
Connection to the mains supply in the United Kingdom.  
DO NOT cut off the mains plug from this equipment.  
If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain  
an appropriate safety approved extension lead or consult your dealer.  
In the unlikely event of the plug fuse failing be sure to replace the fuse only with an identical approved type, as  
originally fitted, and to replace the fuse cover. If the fuse fails again consult your nearest JVC dealer.  
If nonetheless the mains plug is cut off remove the fuse and dispose of the plug immediately, to avoid a possible shock  
hazard by inadvertent connection to the mains supply.  
If this product is not supplied fitted with a mains plug then follow the instructions given below:  
DO NOT make any connection to the Larger Terminal coded E or Green.  
Blue to N (Neutral) or Black  
Brown to L (Live) or Red  
The wires in the mains lead are coloured in accordance with the following code:  
If these colours do not correspond with the terminal identifications of your plug, connect as follows:  
Blue wire to terminal coded N (Neutral) or coloured Black.  
Brown wire to terminal coded L (Live) or coloured Red.  
If in doubt — consult a competent electrician.  
Some Do's And Don'ts On The Safe Use Of Equipment  
This equipment has been designed and manufactured to meet international safety standards but, like any electrical  
equipment, care must be taken if you are to obtain the best results and safety is to be assured.  
DO read the operating instructions before you attempt to use the equipment.  
DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of  
equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains  
plug when making or changing connections.  
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.  
DO be careful with glass panels or doors on equipment.  
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way—  
switch off, withdraw the mains plug and consult your dealer.  
DON’T remove any fixed cover as this may expose dangerous voltages.  
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended  
operation or has a standby mode. Switch off using the switch on the equipment and make sure that your family knows how to  
do this. Special arrangements may need to be made for infirm or handicapped people.  
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of road safety. It is  
illegal to watch television whilst driving.  
DON’T listen to headphones at high volume, as such use can permanently damage your hearing.  
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage  
and shorten the life of the equipment.  
DON’T use makeshift stands and NEVER fix legs with wood screws—to ensure complete safety always fit the manufacturer’s  
approved stand or legs with the fixings provided according to the instructions.  
DON’T allow electrical equipment to be exposed to rain or moisture.  
ABOVE ALL...  
NEVER let anyone especially children push anything into holes, slots or any other opening in the case—this could result in  
a fatal electrical shock;  
NEVER guess or take chances with electrical equipment of any kind—it is better to be safe than sorry!  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
EK  
Printed in Indonesia  
P/NO : 3834RV0038A  
© 2005 Victor Company of Japan, Limited  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer Dryer IWDD 7143 User Manual
Ingersoll Rand Impact Driver 2015MAX User Manual
Ingersoll Rand Water Pump 613123 XXX C User Manual
Jacuzzi Bathroom Aids 7236 RH User Manual
JVC Car Stereo System CH X350 X300 User Manual
JVC Network Card IF CF01PNG User Manual
Kaito electronic Car Stereo System KA11 User Manual
Kanguru Solutions Network Router iNAS 100 User Manual
Kenwood Stereo Equalizer KRC 999II User Manual
KitchenAid Slow Cooker 9763141A User Manual