DVD AUDIO/VIDEO PLAYER
Before operation
2
XV-NA70BK/XV-NA77SL
Preparations
4
Basic operations
10
16
27
31
33
Advanced operations
VR format disc playback
MP3/WMA disc playback
JPEG disc playback
Changing the initial settings 36
Additional information
44
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial No.
which are located on the rear, bottom or
side of the cabinet. Retain this information
for future reference.
Model No.
Serial No
GNT0036-001A
[J/UJ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied accessories
Table of contents
Check that you have all the following accessories supplied to you.
If anything is missing, consult your dealer immediately.
Supplied accessories................................................................1
About this manual .....................................................................1
Precautions................................................................................1
• Audio/video cable (Yellow/White/Red) (× 1)
• Audio cable (White/Red) (× 2)
• Remote control unit (× 1)
Before operation................................................... 2
• R6P(SUM-3)/AA(15F) battery (× 2)
• AC power plug adaptor (× 1) (for PX model ONLY)
About discs..............................................................................2
Preparations ......................................................... 4
Connections.............................................................................4
Using the remote control unit...................................................8
About this manual
• The display window information and OSD (On Screen Display)
menu items are put in brackets [ ] in the operation procedures.
• Usable disc(s) for each operation/function is (are) referred to by
the icons;
Basic operations ................................................ 10
Turning on/off the unit............................................................10
Initial setup ............................................................................10
Basic playback.......................................................................11
Resuming playback ...............................................................13
Various speed playback ........................................................14
Locating the beginning of a scene or song............................15
Precautions
Notes on the power cord
• When you are away on travel or otherwise for an extended
period of time, remove the plug from the wall outlet. A small
amount of power (2.0 W) is always consumed while the power
cord is connected to the wall outlet.
• When unplugging the unit from the wall outlet, always pull the
plug, not the power cord.
Advanced operations......................................... 16
Playing from a specific position .............................................16
Selecting a still picture on a DVD AUDIO disc (PAGE) .........17
Playing back a bonus group of a DVD AUDIO disc...............18
Changing the playback order.................................................18
Repeat playback....................................................................20
Changing the language, sound and scene angle ..................21
Special picture/sound effect ..................................................22
Checking the sampling frequency and quantization bit length ......... 23
Menu bar functions................................................................24
• Do not handle the power cord with wet hands!
Avoid moisture, water and dust
• Do not place the unit in moist or dusty places.
• If water gets inside the unit, turn off the power and remove the
plug from the wall outlet, then consult your dealer. Using the
unit in this state may cause a fire or electrical shock.
VR format disc playback.................................... 27
About VR format discs...........................................................27
Basic operations....................................................................27
Repeat playback....................................................................29
Changing the sound ..............................................................30
Turning on/off the subtitle......................................................30
Avoid high temperatures
• Do not expose the unit to direct sunlight or place it near a
heating device.
Notes on installation
MP3/WMA disc playback ................................... 31
• Select a place which is level, dry and neither too hot nor too
cold between 5°C and 35°C (41°F and 95°F).
• Leave sufficient distance between the unit and the TV.
• Do not install the unit in a place subject to vibrations.
• Do not put heavy objects on the unit.
Operations.............................................................................31
JPEG disc playback ........................................... 33
About JPEG discs..................................................................33
Basic operations....................................................................33
Viewing pictures continuously (slide show mode) .................34
To prevent malfunction of the unit
• There are no user-serviceable parts inside. If anything goes
wrong, unplug the power cord and consult your dealer.
• Do not insert any metallic objects, such as wires, hairpins,
coins, etc. into the unit.
Changing the initial settings ............................. 36
• Do not block the vents. Blocking the vents may damage the unit.
Selecting preferences............................................................36
Making fine tuning for your speakers.....................................40
Limiting playback by children.................................................42
To clean the cabinet
• Use a soft cloth. Follow the relevant instructions on the use of
chemically-coated cloths.
• Do not use benzene, thinner or other organic solvents and
disinfectants. These may cause deformation or discoloring.
Additional information....................................... 44
Names of parts and controls..................................................44
AV COMPU LINK remote control system ..............................46
Troubleshooting.....................................................................47
Specifications ........................................................................48
Appendix A: Country/Area code list for Parental Lock...........49
Appendix B: Table of languages and their abbreviations ......50
Appendix C: Digital output signal chart..................................50
Appendix D: Glossary............................................................51
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Before operation
Region code of DVD VIDEO
This unit can play back DVD VIDEO discs whose region code
numbers include “1.”
About discs
Playable disc types
Discs with the following marks can be played back on the unit.
Examples of playable DVD VIDEO discs:
1 2
3 4
1 2 3
4 5 6
ALL
1 5
DVD AUDIO
DVD VIDEO
SVCD
1
A U D I O
V I D E O
NOTE
The unit’s region code is printed on the rear of the unit.
Video CD
Audio CD
Color system format
This unit accommodates the NTSC system, and also can play
back discs recorded with PAL system whose Region Code
numbers include “1.”
Note that the PAL video signal on a disc is converted to an NTSC
signal and output.
The DVD Logo is a trademark.
The unit can also play back the following discs:
• 9.4GB/4.7GB DVD-RAM with no cartridge, recorded with the
video recording standard version 1.1
• 9.4GB/4.7GB DVD-RAM with cartridge but can be removed
from the cartridge, recorded with the video recording standard
version 1.1
• DVD-R/RW discs written in the DVD VIDEO format and finalized
• DVD-RW (version 1.1) discs written in the VR (Video
Recording) format and finalized
• CD-R and CD-RW discs written in the SVCD, Video CD or
Audio CD format and finalized
• CD-R and CD-RW discs written in MP3 or WMA in accordance
with the “ISO 9660” format (See page 31 for details.)
• CD-R and CD-RW discs written in JPEG in accordance with the
“ISO 9660” format (See page 33 for details.)
Unplayable discs
The unit does not play back discs listed below. If you try to play
back these discs, noise may generate causing damage to
speakers.
• 2.6GB/5.2GB DVD-RAM, cartridge type 1 DVD-RAM, version
1.0 DVD-RW (recordable only in the VR format), DVD-ROM,
CD-ROM, PHOTO CD, SACD
In addition, the unit does not play:
• Unfinalized discs.
NOTES
• Discs of irregular shape or discs with tape, seals or paste on
either the label side or playback side. Playing back these discs
may damage the unit.
• If a disc gets dirty, scratched or warped, or due to the disc
characteristics or recording conditions, it may take considerable
time for the unit to read the content, or the unit may not be able
to play back such discs.
• With some DVD-RAM and DVD-RW (recorded in VR format)
discs, portions such as a part between two programs may not
be played back smoothly.
• DVD-RAM discs created using a personal computer and which
do not comply with the video recording standard cannot be
played back.
• DVD-RAM and DVD-RW discs that comply with the CPRM and
on which material allowed to be copied only once is recorded
cannot be played back.
(CPRM: a picture source encryption technology developed to
protect copyright)
• When playing back a DVD-RAM disc of type 2 or type 4, first
remove the disc from the cartridge and place it in the disc tray
(see page 11). Take care not to scratch the disc or make the
disc dirty. After playing back the disc, be sure to retain it in the
cartridge. (See also the instructions supplied with the disc.)
Digital audio formats
The unit supports the following digital audio formats (see page 51
“Glossary” for descriptions of each audio format):
Linear PCM, Dolby Digital, DTS (Digital Theater Systems), MLP
(Meridian Lossless Packing)
NOTE
Depending on the unit’s [DIGITAL AUDIO OUTPUT] setting,
digital audio signals may not be output as they are recorded on
the disc. See “DIGITAL AUDIO OUTPUT” on page 38 for details.
Notes on discs
• With some DVD VIDEO discs, the unit starts playback
automatically after inserting the disc.
• The image may be sometimes poor or noisy due to defects in
the disc itself.
The unit can play back audio signals recorded in MIX-MODE CD,
CD-G, CD-EXTRA and CD TEXT.
• With some discs, operations described in this manual may not
be possible.
• When a DVD AUDIO disc is played back, the DVD AUDIO
indicator on the front panel turns on.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Before operation
Care and handling of discs
If a disc gets dirty, dusty, scratched or warped, playback sound
and picture may be deteriorated. Take proper precautions when
handling discs.
Handling
• Do not touch the surface of the disc.
• Do not damage, stick paper to, or use any adhesive on either
the label side or playback side.
Storing discs
• Keep discs in their cases. If discs are piled on top of one
another without their protective cases, they can be damaged.
• Do not put discs in a location where they may be exposed to
direct sunlight, or where the humidity or temperature is high.
Avoid leaving discs in a car!
Cleaning discs
• Wipe with a soft dry cloth, moving from the center outwards. If a
disc is difficult to clean, wipe with a cloth moistened with water.
• Never use record cleaners, petrol, alcohol or any anti-static
agents.
Notes on copyright
Check the copyright laws in your country before recording from
DVD AUDIO, DVD VIDEO, DVD-RAM, SVCD, Video CD, Audio
CD, MP3, WMA and JPEG discs.
Recording of copyrighted material may infringe copyright laws.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Connections
Before using the unit, connect the unit to a TV and/or amplifier.
NOTE
Before making connections
If your TV has an AV COMPU LINK terminal, you can use the AV
COMPU LINK function. See “AV COMPU LINK remote control
system” on page 46 for details.
• Do not connect the AC power cord until all other
connections have been made.
• Connect VIDEO OUT of the unit directly to the video input
of your TV. Connecting VIDEO OUT of the unit to a TV via a
VCR may cause a monitor problem when playing back a
copy-protected disc. You may also have a monitor problem
when connecting the unit to an integrated TV/Video
system.
• In the following description, “TV” may be substituted with
“monitor” or “projector.”
• Terminal names used for other components may be different
from those used in the following description.
Connecting to a TV
The following sections A to C describe TV connections where
only a TV is connected to the unit so that you will hear audio from
the TV.
NOTES
• Be sure to connect the red and white plugs of the audio/video
cable to the FRONT RIGHT/LEFT jacks on the rear of the unit,
as shown in the illustration.
• If your TV has a monaural audio input instead of stereo, you
need to use an optional audio cable which converts stereo
audio output to monaural.
A Connecting to a conventional TV
• Set [ANALOG OUT] in the [AUDIO] preference display to [2-CH
STEREO] (see page 38).
VIDEO SIGNAL
SELECTOR
TV
IN
Yellow
REMOTE
480p
480i
VIDEO
NAL
OR
SELECETMO
VIDEO SIG
E
White
T
R
COMPU LINK
V
A
LEFT
p
0
8
4
i
0
8
4
IO
D
AU
RIGHT
Set the VIDEO SIGNAL SELECTOR to “480i.”
Red
NT
T
NE
O
P
PR
COM
O
E
D
I
Audio/video cable (supplied)
PB
V
Y
The unit
L
A
I
Yellow
O
U
X
A
O
IDE
V
C
M
A
E
TR
/S
T
M
F
O
E
D
E
C
L
I
V
-
S
A
C
I
T
P
O
T
L
A
DIGIT
OUT
R
H
E
IG
T
R
N
E
White
C
R
A
-
E
T
B
R
U
S
R
E
IO OU
F
O
D
O
W
AU
Red
B Connecting to a TV with an S-video jack
NOTES
If your TV has an S-VIDEO input, you can get better picture
quality by connecting it with the S-VIDEO output of the unit using
an S-video cable instead of connecting the video input of the TV
to the VIDEO jack of the unit.
• Be sure to connect the red and white plugs of the audio cable to
the FRONT RIGHT/LEFT jacks on the rear of the unit, as shown
in the illustration.
• Set [ANALOG OUT] in the [AUDIO] preference display to [2-CH
STEREO] (see page 38).
TV
IN
VIDEO SIGNAL
SELECTOR
S-VIDEO
REMOTE
480p
VIDEO
OR
VIDEO SIGNAL
480i
E
T
SELECETMO
R
T
COMPU LINK
V
A
LEF
White
p
0
8
4
i
0
8
4
IO
D
AU
RIGHT
Set the VIDEO SIGNAL SELECTOR to “480i.”
S-video cable (not supplied)
Red
T
PONEN
M
PR
O
C
O
E
D
I
V
B
Y
The unit
T
L
A
I
O
OU
X
E
ID
A
O
C
V
M
A
E
TR
S
/
T
M
F
O
E
D
E
C
L
I
V
-
S
L
A
C
I
T
P
O
T
T
L
OU
R
E
H
A
T
IG
N
R
E
IGIT
C
D
White
R
A
-
E
T
OU
B
R
U
S
R
E
O
I
F
O
D
O
W
AU
Audio cable (supplied)
Red
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
C Connecting to a TV with component jacks
You can enjoy picture of high-fidelity color reproduction by
connecting the COMPONENT VIDEO OUT jacks on the unit to
your TV.
About the scanning mode
Depending on the material source format, DVD VIDEO discs
can be classified into two types; film source and video source
(note that some DVD VIDEO discs contain both film source
and video source). Film sources are recorded as 24-frame-per-
second information, while (NTSC) video sources are recorded
as 30-frame-per-second (60-field-per-second interlaced)
information.
NOTES
• Be sure to connect the red and white plugs of the audio cable to
the FRONT RIGHT/LEFT jacks on the rear of the unit, as shown
in the illustration.
• Connect “Y” to “Y,” “PB” to “PB” (CB), “PR” to “PR” (CR) correctly.
• Set [ANALOG OUT] in the [AUDIO] preference display to [2-CH
STEREO] (see page 38).
When the unit plays back a film source material, uninterlaced
progressive output signals are created using the original
information. When a video source material is played back, the
unit interleaves lines between the interlaced lines on each to
create the interpolated picture and outputs as the progressive
signal.
• If your TV has component video input jacks of BNC type, use an
adapter which converts a pin jack to a BNC jack (not supplied).
Progressive scan video playback available
In the Progressive scanning mode, you can enjoy high quality
picture with less flickers when the COMPONENT VIDEO OUT
jacks are connected to a TV or monitor that supports the
progressive video input.
TV
Red
PR
IN
VIDEO SIGNAL
SELECTOR
PB
Y
Blue
S-VIDEO
COMPONENT IN
REMOTE
480p
VIDEO
480i
L
T
White
LEF
OR
SELEREMO
p
VIDEO SCITGNA
TE
MPU LINK
O
IO
D
C
AV
AU
0
8
4
i
0
8
4
RIGHT
Green
See “Selecting the VIDEO SIGNAL
SELECTOR position” below.
Red
PONENT
M
PR
O
C
O
E
D
I
V
B
Red
Y
Component video cable (not supplied)
The unit
T
L
A
I
OU
E
ID
AX
O
C
V
M
T
A
E
TR
/S
M
L
T
F
O
E
D
E
C
L
I
V
-
S
A
C
I
T
P
O
T
L
A
IGIT
OU
R
H
IG
E
T
-
N
R
E
C
R
A
White
E
T
OU
R
B
U
S
R
O
I
E
F
D
O
O
AU
W
Green
Blue
Audio cable (supplied)
Red
Selecting the VIDEO SIGNAL SELECTOR position
Source type of DVD VIDEO
• If your TV equipped with component jacks does not support the
progressive scanning mode
Setting of
[PICTURE SOURCE]
Film source
Video source
Red
Set the VIDEO SIGNAL SELECTOR to “480i.”
• If your TV equipped with component jacks supports the
progressive scanning mode
Set the VIDEO SIGNAL SELECTOR to “480p.”
• If you want to select the scanning mode between the interlace
and progressive modes (depending on the source condition, or
when connecting more than one TV, etc.)
AUTO
FILM
Green
Green
Red
Green
VIDEO (NORMAL)/
(ACTIVE)
Red
Set the VIDEO SIGNAL SELECTOR to “REMOTE.”
Thus you can select the mode from the remote control unit.
* While stopped in the Progressive scanning mode, the
PROGRESSIVE indicator is lit in red regardless of the
[PICTURE SOURCE] selection.
NOTE
You must change the VIDEO SIGNAL SELECTOR position while
the unit power is off. Otherwise, the changed setting is not
effective.
NOTES
• The Progressive scanning mode works only when you connect
the unit’s COMPONENT VIDEO OUT jacks to your TV.
• There are some progressive TV and High-Definition TV sets
that are not fully compatible with the unit, resulting in the
unnatural picture when playing back a DVD VIDEO disc in the
Progressive scanning mode. In such a case, use the Interlaced
scanning mode. To check the compatibility of your TV set,
contact your local JVC customer service center.
Activating the Progressive scanning mode using the remote
control unit
When the unit is turned on and the VIDEO SIGNAL SELECTOR
is set to “REMOTE,” press and hold down VFP - PROGRESSIVE
SCAN for a few seconds.
The scanning mode switches between the Progressive scanning
and Interlaced scanning modes.
When the scanning mode is set to the Progressive mode, the
PROGRESSIVE indicator on the front panel turns on.
Depending on the [PICTURE SOURCE] setting on the
[PICTURE] preference display and whether the current DVD
VIDEO disc is film-source or video-source, the color of the
indicator differs, as shown in the table below. (See page 37.)
• All JVC progressive TV and High-Definition TV sets are fully
compatible with the unit (Example: AV-61S902).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Connecting to optional audio equipment
Connecting to a stereo audio amplifier/receiver
NOTES
Connect the unit’s AUDIO OUT (LEFT/RIGHT) jacks to any line-
level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or
receiver.
• Be sure to connect the red and white plugs of the audio cable to
the FRONT RIGHT/LEFT jacks on the rear of the unit, as shown
in the illustration.
• Set [ANALOG OUT] in the [AUDIO] preference display to [2-CH
STEREO] (see page 38).
Amplifier or receiver
IN
OR
SELECEMO
VIDEO SIGNAL
E
T
R
T
COMPU LINK
White
V
A
LEF
p
0
8
4
i
0
8
4
IO
D
AU
RIGHT
Red
PONENT
PR
COM
O
E
D
I
V
B
Y
The unit
T
Audio cable (supplied)
L
A
I
O
OU
E
ID
AX
O
C
V
M
T
A
E
R
T
S
/
T
M
F
O
E
D
E
C
L
I
V
-
S
A
C
I
T
P
O
T
H
L
OU
R
A
TE
-
IG
N
R
IGIT
E
C
D
White
R
A
E
T
OU
B
R
U
S
R
E
O
I
OF
D
O
W
AU
Red
Connecting to an amplifier/receiver equipped with
5.1-channel inputs
The unit supports the linear PCM multichannel format of DVD
AUDIO and can feed multichannel audio output signals from the
six analog AUDIO OUT jacks.
It is also equipped with the DTS and Dolby Digital decoders. So
you can enjoy any type of the high quality surround sounds by
connecting the unit to an amplifier/receiver equipped with the 5.1-
channel inputs.
NOTES
• When using the 5.1-channel outputs of the unit, set the
[ANALOG OUT] in the [AUDIO] preference display to [MULTI
CHANNEL] (see page 38).
• If you select [EXPERT] in the [SPK.SETTING] preference
display, you can control the audio output balance of the
speakers (see page 38).
• You can use the yellow plugs of the audio/video cable for video
connection.
OOFER
Amplifier or receiver
SUBW
Red
DIO IN
U
CENTER
A
REAR
White
T
T
N
LEF
O
FR
OR
SELECEMO
VIDEO SIGNA
E
T
T
RIGHT
LEF
R
COMPU LINK
V
A
p
0
8
4
i
0
8
4
RIGHT
Red
White
Audio cable (supplied)
Audio/video cable (supplied)
Audio cable (supplied)
T
PONEN
M
PR
CO
O
E
D
I
PB
V
Y
The unit
L
A
I
O
OUT
X
E
ID
A
O
C
V
M
A
White
Red
E
R
T
S
/
T
M
F
O
E
D
E
C
L
I
-V
S
L
A
C
I
T
P
O
T
T
L
OU
H
IG
A
R
E
T
R
N
B
IGIT
E
D
C
R
A
E
-
R
U
S
R
E
F
O
UDIO OUT
A
O
W
Red
White
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Connecting to a digital audio device
NOTES
You can enjoy sound of enhanced quality by connecting the unit’s
DIGITAL OUT (either OPTICAL or COAXIAL) jack to a digital
input of an amplifier, etc., using an optical or coaxial digital cable.
The digital audio signal on a disc will be transferred directly from
the unit. If the connected digital audio equipment is a Dolby
Digital or DTS decoder or an amplifier with a built-in decoder, you
can enjoy high-quality surround sound.
• Connect the unit and the digital audio device by using either an
optical digital cable or a coaxial digital cable.
• It is not recommended to use the digital jacks for dubbing.
When recording the sounds (DVD AUDIO, DVD VIDEO, SVCD,
Video CD or Audio CD) played back on the unit, record them
through the analog jacks (in this case, set [ANALOG OUT] in
the [AUDIO] preference display to [2-CH STEREO]) (see page
38).
• Depending on the disc, no signal may be output from the
DIGITAL OUT. Make an analog connection in this case.
• Set [DIGITAL AUDIO OUTPUT] in the [AUDIO] preference
display correctly according to the connected digital audio
equipment. If setting made for [DIGITAL AUDIO OUTPUT] is
incorrect, loud noise may be generated causing damage to
the speakers (see page 38).
Digital equipment
IN
OPTICAL
IN
AL
DIGIT
NAL
IAL
AX
OR
SELECETMO
VIDEO SIG
E
T
T
CO
LEF
D
R
COMPU LINK
V
A
p
0
8
4
i
0
8
4
DV
RIGHT
NT
PR
Coaxial digital cable (not supplied)
COMPONE
B
O
E
D
I
V
Y
The unit
L
A
I
O
IDE
OUT
X
A
O
C
V
M
T
A
E
R
T
S
/
T
M
F
O
E
D
E
C
L
I
-V
S
L
A
C
I
T
P
O
T
L
OU
H
R
E
IG
T
R
N
B
Audio cable (supplied)
E
DIGIT
C
R
-
A
E
T
DIO OU
U
R
S
R
E
F
O
O
W
U
A
Optical digital cable (not supplied)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
• Do not mix new and old batteries, or batteries of different types,
when replacing them.
Connecting the power cord
When all the audio/video connections have been made, connect
the AC power plug to the wall outlet. Make sure that the plugs are
inserted firmly.
Remote sensor
Point the top of the remote control unit toward the remote sensor
as directly as possible. If you operate it from a diagonal position,
the operating range (approx. 5 m) may be shorter.
The STANDBY indicator lights in red.
NOTE
(only for PX model)
Use the supplied AC power plug adaptor when inserting the
larger plug to the wall outlet.
Remote sensor
Warning
• Disconnect the power cord:
- if you are not going to use the unit for a long time.
- before cleaning the unit.
- before moving the unit.
• Do not:
- connect or disconnect the power cord with wet hands.
- pull the power cord when disconnecting it, as this may
damage the cord and cause fire, electric shock, or other
accidents.
Caution
• Do not alter, twist or pull the power cord, or put anything heavy
on it, which may cause fire, electric shock, or other accidents.
• If the cord is damaged, consult a dealer and have the power
cord replaced with a new one.
Using the remote control unit
To install batteries
Open the compartment cover, and place the two supplied R6P
(SUM-3)/AA(15F) batteries in the remote control unit according to
the polarity markings (“+” and “–”) inside the compartment. Then
replace the cover.
The batteries will last about six months with normal use.
If the functions of the remote control unit become erratic, replace
the batteries.
Precautions of the safe use of batteries
Observe the following precautions for the safe use of batteries. If
they are used improperly their lives will be shortened, they may
burst or their contents may leak.
• Remove the batteries from the remote control unit if it is not
going to be used for a long period of time.
• Remove dead batteries and dispose of them properly.
• Never leave dead batteries lying around, take them apart, mix
them with other refuse, or throw them into an incinerator.
• Never touch liquid that has leaked out of a battery.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
3 Release TV/VIDEO - CANCEL.
4 Try to operate the TV by pressing TV
STANDBY/ON
TV-DVD
.
If your TV turns on or off, you have successfully set the
control signal.
TV STANDBY/ON
Numeric buttons
TV/VIDEO-CANCEL
ENTER
NOTES
• The initial manufacuturer code of the unit upon purchase is
“JVC” (01).
• If there is more than one code listed for the manufacturer of
your TV, try them one by one until you succeed.
Operating the TV
Set the TV - DVD switch on the remote control unit to “TV.”
AMP VOL +/-
TV
DVD
The following buttons can be used for operating the TV.
Turns the TV on or off.
TV
To use the remote control unit for TV
operation
Switches the TV input mode between TV and
VIDEO.
TV/VIDEO
CANCEL
Setting the remote control signal for operating your
TV
Selects the TV channels directly.
TV1
TV-/--
10
*For some TVs, pressing “+10” functions as the
“100+,” while “10” functions as the ENTER button
if your TV requires pressing the ENTER button
after selecting a channel number.
1
~
TV0
0
1 Set the TV - DVD switch to “TV.”
Mutes the TV sound.
MUTING
+10
2 While holding down TV/VIDEO - CANCEL,
enter the manufacturer code of your TV listed
below by using the numeric buttons (0 to 9),
and then press ENTER.
Changes the TV channels.
CH
+
Example:
CH
To enter the manufacturer code “01”: Press “0,” “1,” then
-
ENTER.
Adjusts the TV sound volume.
VOL
-
VOL+
Manufacturer code list
Manufacturer
AIWA
No.
36
Manufacturer
MIVAR
No.
29
BEIJING
CCE
22
NEC
20
To control the volume of a JVC’s amplifier or
receiver
02
NOBLEX
NOKIA
22
CHANGHONG
DAEWOO
FERGUSON
FINLUX
34
31
Pressing the AMP VOL + button raises the audio volume of a
JVC’s amplifier or receiver, while pressing the – button lowers the
volume.
17, 37
27
PANASONIC
PEONY
04, 11
34, 38, 39
10, 17, 21
02
30
PHILCO
PHILIPS
RCA
FUNAI
32
AMP
VOL
GRADIENTE
GRUNDIG
HITACHI
ITT
15, 20
19
05
12, 33, 34,
35
SAMSUNG
10
28
SANYO
SEARS
SHARP
SONY
13, 16
13
JINXING
38
01, 23, 24,
25
06
JVC
07
KONKA
40
18
02
03
TCL
41
LG (GOLDSTAR)
MAGNAVOX
MITSUBISHI
THOMSON
TOSHIBA
ZENITH
26
08, 14
09
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
• NOW READING (The unit is reading the disc information.)
• REGION CODE ERROR! (The region code of the DVD VIDEO
disc does not match the unit. The disc cannot be played back.)
• OPEN
STANDBY indicator
0
3
• CLOSE
• NO DISC
NOTE
Even if you turn off the unit, the unit is not disconnected from the
AC power source as long as it is connected to the wall outlet. This
state is called standby mode. In this state, the unit consumes a
very small amount of power.
OPEN/CLOSE
DVD STANDBY/
ON
Initial setup
When you turn on the unit for the first time after purchase, the
following message appears on the TV screen.
TOP MENU
ENTER
5/∞
EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO
SETTING
YES - PRESS ENTER NO - CANCEL
3
DIMMER
You can set the display language, TV monitor type, analog audio
output and digital output before using the unit, by following the
procedure below.
• Refer to pages 37 and 38 for detailed explanation of each item
to be set in the following procedure.
NOTE
Make sure that the TV - DVD switch on the
remote control unit is set to “DVD” when
using the 5/∞/2/3and numeric buttons
for controlling the unit.
TV
DVD
1 Press ENTER.
The first page of the DVD PLAYER SET UP display appears.
The pull-down menu of the [ON SCREEN LANGUAGE] is
already open.
About invalid operation icon
DVD PLAYER SET UP
When you press a button, and if the unit does not accept its
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
OFF
operation,
appears on your TV screen. Operations are
occasionally unacceptable even if
is not displayed.
ON SCREEN LANGUAGE
ENGLISH
ENGLISH
SPANISH
FRENCH
Note that some operations may not be accepted. For example,
some discs may not allow rapid advance/reverse or slow-
motion playback.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
ON SCREEN LANGUAGE options
2 Press 5/∞to select the desired language.
Turning on/off the unit
You can select the on-screen language for the preference
displays, etc. from among ENGLISH, SPANISH and
FRENCH.
Press DVD STANDBY/ON
control unit or press on the front panel.
on the remote
The STANDBY/ON indicator on the front panel, which lights
in red during standby, lights in green.
3 Press ENTER.
The second page is shown, in which the pull-down menu of
the [MONITOR TYPE] is already open.
The opening display appears on the TV screen, and the following
messages may appear at the bottom of the opening display.
DVD PLAYER SET UP
MONITOR TYPE
PICTURE SOURCE
SCREEN SAVER
MP3&WMA/JPEG
4:3 L.B.
16:9 NORMAL
16:9 AUTO
4:3 LB
4:3 PS
MP3
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
NOW READING
MONITOR TYPE options
Message area
4 Press 5/∞to select the desired monitor type.
For a normal (conventional) TV, select [4:3 LB] or [4:3 PS].
For a wide-screen TV, select [16:9 NORMAL] or [16:9 AUTO].
(See page 37.)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
5 Press ENTER.
About screen saver function
The third page is shown, in which the pull-down menu of the
[ANALOG OUT] is already open.
A television monitor may have an image burned into it if a static
image is displayed for a long time. To prevent this, the unit
automatically activates the screen saver function if a static
picture, such as an on-screen display or menu, is displayed for
over 5 minutes.
DVD PLAYER SET UP
DIGITAL AUDIO OUTPUT
ANALOG OUT
STREAM/PCM
DOLBY PROLOGIC
2-CH DOLBY SURROUND
When the screen saver function is activated, the TV screen
gets darker.
D. RANGE CONTROL
OUTPUT LEVEL
2-CH STEREO
MULTI CHANNEL
Pressing any buttons will release the screen saver function
(see page 37).
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
ANALOG OUT options
Basic playback
6 Press 5/∞to select a desired analog output
signal type.
Set this item correctly when you play back a DVD VIDEO disc
recorded with surround multichannel audio.
• When connecting to a surround decoder, select [2-CH
DOLBY SURROUND].
• When connecting to a stereo amplifier/receiver or TV, select
[2-CH STEREO].
• When connecting the unit’s 5.1-channel output, select
[MULTI CHANNEL]. Note that you can perform fine tuning
for your speakers when [MULTI CHANNEL] is selected (see
pages 38 and 40).
1 Press 0(or OPEN/CLOSE on the remote
control unit) to open the disc tray.
2 Place a disc in the disc tray.
With the label side up
7 Press ENTER.
The final page is shown, in which the pull-down menu of the
[DIGITAL AUDIO OUTPUT] is already open.
E
IV
SS
E
R
G
O
R
P
DVD PLAYER SET UP
DIGITAL AUDIO OUTPUT
ANALOG OUT
DOLBY DIGITAL/PCM
PCM ONLY
DOLBY DIGITAL/PCM
D. RANGE CONTROL
OUTPUT LEVEL
STREAM/PCM
• To insert an 8-cm disc, place it in the inner recess.
3 Press 3.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
The unit starts playback from the beginning.
DIGITAL AUDIO OUTPUT options
If a menu is shown on the TV screen
When inserting a DVD AUDIO, DVD VIDEO, SVCD or Video CD
disc, a menu may be shown on the TV screen. From the menu,
you can select a desired item to be played back.
8 Press 5/∞to select a desired digital output
signal type.
Set this item correctly when you connect the unit to an
external surround decoder or D/A converter. (If you do not
connect the unit to such a device, you do not have to set this
item.)
• When connecting to other digital device, select [PCM
ONLY].
• When connecting to a Dolby Digital decoder, select
[DOLBY DIGITAL/PCM].
• When connecting to a Dolby Digital decoder or a DTS
decoder, select [STREAM/PCM].
For DVD AUDIO/DVD VIDEO
1 Press 5/∞/2/3to select a desired item.
2 Press ENTER.
The unit starts playback of the selected item.
For SVCD/Video CD
Press the numeric buttons to select a desired item.
The unit starts playback of the selected item.
NOTES
• Do not insert an unplayable disc. (See page 2.)
• When inserting a disc on the disc tray, be sure to position the
disc inside the recess. Otherwise, the disc may be damaged
when the disc tray is closed, or you may not be able to remove
the disc from the unit.
• When a DVD AUDIO disc is played back, the DVD AUDIO
indicator on the front panel turns on.
• For a double-sided DVD VIDEO disc, place the disc with the
playback side facing down.
9 Press ENTER.
The TV screen returns to the opening display.
To bring up the DVD PLAYER SET UP display later
Press CHOICE for a few seconds until the DVD PLAYER SET UP
display appears.
To change the brightness of the display window
Press DIMMER on the remote control unit.
You can select the display window and the disc tray brightness
from three levels, or off. If the brightness is set to off, nothing
will be shown on the display.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
To stop playback completely
0
7 38
Press 7.
Hint
If you press 0during playback, the unit stops playback and
opens the disc tray.
To stop playback temporarily
Press 8.
To resume playback, press 3. (See the following item.)
About On-screen guide icons
TOP MENU
MENU
You may see the following icons displayed over the picture.
They have the following meanings.
ON SCREEN
7
8
3
: Appears at the beginning of playback mode.
: Appears at the beginning of pause mode.
: Appears at the beginning of fast forward/backward
playback with the current speed (see page 14).
: Appears at the beginning of slow-motion playback
with the current speed (see page 14).
About PBC (Playback Control)
: Appears at the beginning of a scene recorded from
multiple angles (see page 21).
Some SVCD/Video CD discs support the PBC function.
The PBC function allows you to enjoy menu-driven operation
and high-resolution still images which have a resolution four
times greater than moving pictures.
• To play a PBC-compatible SVCD/Video CD disc without
activating the PBC function, press the numeric buttons
instead of 3to start playback.
• To activate the PBC function again,
1) press TOP MENU or MENU,
: Appears at the beginning of a scene recorded with
multiple audio languages (see page 21).
: Appears at the beginning of a scene recorded with
multiple subtitle languages (see page 21).
or
You can change the setting so that the on-screen guide icons
do not appear on the TV screen (see page 39).
2) press 7to stop playback, then press 3.
To check the playback status
You can see the current selection number (the group/track
number for DVD AUDIO, the title/chapter number for DVD VIDEO
or track number for SVCD/Video CD/Audio CD), time information
(the track or chapter time while stopped, or elapsed track or
chapter time during playback) and the transport status (stop,
playback, pause, etc.) on the TV screen.
Press ON SCREEN.
Example: for DVD VIDEO
Current transport
status
Current chapter
number
Transfer rate
TITLE 33 CHAP 33 TOTAL 1:25:58
8.5Mbps
Current title number
Current chapter
time
Note that pressing ON SCREEN again brings up the menu bar
under the status bar, from which you can access various
functions. See page 24 for details about the menu bar.
To turn off the status bar
Press ON SCREEN repeatedly until the status bar goes off.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
To resume playback
Resuming playback
When the resume mode is “ON”
While the disc you interrupted playback is
The unit can memorize the position on a disc where you interrupt
playback, and resume playback from that position later.
There are three resume modes; ON, OFF and DISC RESUME.
The mode is initially set to ON when you purchased the unit.
• You can select the mode using the preference display (see
page 39).
still on the disc tray, press 3.
The unit resumes playback from the position where playback
was interrupted. The TV screen and the display window show
[RESUME PLAY].
To play back from the beginning
Press 7before pressing 3to start playback.
When the resume mode is “ON”
When you press 7, the unit stops playback and memorizes the
interrupted position. The TV screen shows [RESUME STOP] and
the display window shows [– – – – RESUME] (for DVD AUDIO/
DVD VIDEO discs) or [– – RESUME] (for SVCD/Video CD/VR
format discs).
The memory of the interrupted position is not cleared if you turn
off the unit.
When you turn off the unit after setting the resume function,
simply press 3. The unit is turned on, and playback starts from
When the resume mode is “DISC RESUME”
1 Press 0to insert a disc for which the unit has
stored an interrupted position.
The TV screen shows [RESUME STOP].
2 Press 3.
The TV screen and the display window show [RESUME
PLAY] and the unit resumes playback from the position
where playback was interrupted.
the interrupted position. If you turn on the unit by pressing
then press 3, playback starts from the beginning of the disc.
Note that the memory is cleared if you open the disc tray.
To play back from the beginning
After inserting the disc, press 7before pressing 3to start
playback.
When the resume mode is “DISC RESUME”
When you press 7, the unit stops playback and memorizes the
interrupted position. The TV screen shows [RESUME STOP] and
the display window shows [– – – – RESUME] (for DVD AUDIO/
DVD VIDEO discs) or [– – RESUME] (for SVCD/Video CD discs).
NOTES
• If you change the [RESUME] setting from [DISC RESUME] to
[OFF] or [ON], you cannot resume playback of a disc whose
“resuming” position is stored. However, when you again set
[RESUME] to [DISC RESUME], you will then be able to resume
playback of the disc.
• If you interrupt the playback of a disc for which an interrupted
position has already been stored, the memory will be updated
with the new interrupted position.
• For a double-sided DVD AUDIO/DVD VIDEO disc, the unit
regards each side as a different disc. Therefore, to resume
playback of such a disc, the disc must be inserted with the
same side down.
• When the unit memorizes an interrupted point for a disc, it also
memorizes Audio, Subtitle and Angle settings.
The memory of the interrupted position is not cleared if you open
the disc tray or turn off the unit.
Hint
The unit memorizes interrupted positions for the last 30 discs
played. Storing a new interrupted position will erase the
interrupted position stored for the first disc.
To clear the memory
Press 7while the disc is stopped.
• The unit may not resume playback exactly from the interrupted
point. In the case of an SVCD/Video CD disc with PBC function,
the unit may resume playback from a point slightly earlier or
later than the point where playback was interrupted.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
0
3 8
To advance a still picture frame by frame
4 ¢
While paused, press 8.
Each time you press 8, the still picture advances to the next
frame.
Pressing 3returns to normal playback.
Numeric buttons
To play back in slow motion
4
1
¢
8
You can select from 1/32 times, 1/16 times, 1/4 times and 1/2
times normal speed.
¡
During playback, press 8, then press ¡(to
play forward slow motion), or 1(to play
reverse slow motion, for DVD VIDEO disc
only).
3
Pressing 3returns to normal playback.
NOTES
Various speed playback
• During slow motion playback, the sound will be muted.
• Reverse slow motion playback is not possible for an SVCD and
Video CD.
To advance or reverse playback rapidly
while monitoring
To replay the previous scenes
(One touch replay function)
During playback, press ¡or 1on the
remote control unit.
You can select from 1.5 times, 5 times, 20 times and 60 times
normal speed. Pressing 3returns the unit to normal
playback.
During DVD VIDEO playback, press
The playback position moves back 10 seconds before the
current position.
.
During playback, hold down ¢or 4.
Playback is advanced or reversed at 5 times normal speed.
NOTES
• This function works only within the same title, though it works
between chapters.
NOTE
• This function may not work with some DVD VIDEO discs.
During rapid playback, the sound will be muted except when
playing a DVD AUDIO or Audio CD, and when playing a DVD
VIDEO or Video CD at 1.5 times normal speed. For DVD AUDIO
and Audio CD discs, the sound will be heard intermittently.
x1.5 Quick Playback with sound
When you select 1.5 times normal speed playback, the disc is
played back with sound.
• For DVD VIDEO discs, the subtitle does not go off.
• If the sound of a DVD VIDEO disc is recorded in Dolby Digital or
DTS format, stereo linear PCM signals are output. With some
DVD VIDEO discs, the sound quality and volume may alter, or
the sound may be out of tune.
• To switch from rapid reverse playback to x1.5 Quick Playback,
first press 3, then press ¡once.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
Locating the beginning of a scene or
song
For DVD AUDIO: During playback or while in stop mode, you can
skip a group or track.
For DVD VIDEO: During playback, you can skip a chapter or title,
depending on the disc configuration.
For SVCD/Video CD: During playback without PBC function, you
can skip a track.
For Audio CD: During playback or while in stop mode, you can
skip a track.
To skip forward, press ¢.
To skip backward, press 4.
Using the numeric buttons
For DVD AUDIO/DVD VIDEO/Audio CD: During playback or while
in stop mode
For SVCD/Video CD: During playback without PBC function or
while in stop mode
Press the numeric buttons to specify the
number.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
The unit starts playback from the beginning of the selection.
NOTES
• Depending on the disc type and the unit status, what is
specified differs:
unit status
Disc type
What is specified
While
stopped
DVD AUDIO
group or track *
title
DVD VIDEO
SVCD/Video CD/Audio CD
DVD AUDIO
track
During
playback
track
DVD VIDEO
chapter
track
SVCD/Video CD/Audio CD
* Pressing the numeric buttons simply selects a track. To select a
group (when a disc contains more than one group), press
TITLE/GROUP before pressing the numeric buttons.
• During DVD VIDEO playback, if a menu is shown on the TV
screen, the numeric buttons may be used for selecting an item
in the menu.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Locating a desired scene from the menu of
a SVCD/Video CD with PBC
Numeric
buttons
Some SVCD/Video CD discs support the PBC function. PBC is
an abbreviation of “Playback Control.” Some SVCD/Video CD
discs recorded with PBC have their own menus, such as a list of
the songs of the disc. You can locate a specific scene by using
the PBC menu.
PAGE
RETURN
TITLE/GROUP
MENU
5/∞/2/3
ON SCREEN
¢
TOP MENU
ENTER
4
1 In stop mode, press 3or TOP MENU.
3
A disc menu appears on the TV screen.
2 Press the numeric buttons to select the
desired item.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
The unit starts playback of the selected item.
To return to the menu, press RETURN.
NOTE
Make sure that the TV - DVD switch on the
remote control unit is set to “DVD” when
using the 5/∞/2/3, numeric and TV/
VIDEO - CANCEL buttons for controlling
the unit.
Hint
TV
DVD
If something like [NEXT] or [PREVIOUS] appears on the TV
screen, pressing ¢advances to the next page, and pressing
4returns to the previous page.
Specifying a desired title/group
Playing from a specific position
Locating a desired scene from the DVD
menu
1 During playback, press TITLE/GROUP.
[--] is shown in the title display area of the display window.
2 Press the numeric buttons to specify a title or
group to be played.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
DVD AUDIO/DVD VIDEO discs generally have their own menus
which show the disc contents. These menus contain various
items such as titles of movies, names of songs, or artist
information, and display them on the TV screen. You can locate a
desired scene using the DVD menu.
The unit starts playback from the specified title or group.
NOTE
1 While a DVD AUDIO/DVD VIDEO disc is
inserted, press TOP MENU or MENU.
The menu appears on the TV screen.
This function may not work with some DVD AUDIO/DVD VIDEO
discs.
2 Press 5/∞/2/3to select a desired item, then
press ENTER.
The unit starts playback of the selected item.
Hints
• Some DVD AUDIO/DVD VIDEO discs may also have a different
menu which appears when MENU is pressed.
• See the instructions of each DVD AUDIO/DVD VIDEO disc for
its particular menu.
• With some discs, you can select items by entering the
corresponding number using the numeric buttons, which may
cause the unit to automatically start playback.
NOTE
The MENU button does not work while stopped.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
To dismiss the menu bar
Press ON SCREEN.
Locating a desired position in the current
title, group or track (Time search)
Hint
“10” and “+10” buttons are not used with this function.
NOTES
You can play a disc from the desired position by specifying the
time from the beginning of the current group (for DVD AUDIO),
the current title (for DVD VIDEO) or the disc (for SVCD/Video CD/
Audio CD).
• Some DVD VIDEO discs do not contain time information, and
the time search function cannot be used.
• When a DVD AUDIO disc is stopped, you can specify the
elapsed time from the beginning of group 1.
• The time search function cannot be used during program
playback.
For DVD AUDIO/DVD VIDEO/Audio CD: During playback or while
in stop mode
For SVCD/Video CD: In any condition except SVCD/Video CD
playback with PBC
Selecting a still picture on a DVD
AUDIO disc (PAGE)
1 Press ON SCREEN twice.
The menu bar appears on the TV screen.
2 Press 2/3to move
to
, then press
ENTER.
The pull-down menu for entering time appears.
Most DVD AUDIO discs include still pictures, which appear in turn
during playback. There are other page(s) of the current sitll
picture and you can change the picture (turn the page) manually.
Screen example for DVD VIDEO
TITLE 33 CHAP 33 TOTAL 1:25:58
8.5Mbps
Hint
OFF
CHAP.
1/3
1/5
1/3
At the beginning of a part where there are selectable pictures,
[PAGE] appears on the TV screen (except when the [ON
SCREEN GUIDE] preference is set to [OFF]).
TIME _:__:__
Screen example for Audio CD
1 During playback except when the status bar
is shown, press PAGE.
TRACK 33 TIME
25:58
OFF
PROG. RND.
The page selection window appears on the TV screen.
TIME __:__
PAGE 1/32
1
3 Press the numeric buttons (0 to 9) to enter
the desired time.
The specified time is displayed in the pull-down menu.
2 Press PAGE or 5/∞to select the desired
Example (for DVD AUDIO/DVD VIDEO)
To play back from 2(H):34(M):00(S)
Press 2, 3, then 4.
page.
3 Press ENTER.
The selected page (picture) is shown.
The page selection window is dismissed.
TIME 2:34:__
Example (for SVCD/Video CD/Audio CD)
To play back from 23(M):40(S)
Press 2, 3, then 4.
TIME
23:4_
You do not have to press “0” to enter the trailing zeros (for the
last two digits in the example above).
To correct a mistake
Press 2repeatedly to move back to the digit where you
entered a wrong number, and reenter the correct one.
4 Press ENTER.
The unit starts playback from the specified time.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Changing the playback order
Numeric
buttons
To play back in a specific order (Program
play)
TV/VIDEO-CANCEL
ON SCREEN
5/∞/2/3
ENTER
7
3
By programming tracks, you can play up to 99 tracks in any order.
You may program the same track more than once.
1 In stop mode, press ON SCREEN twice.
The menu bar appears on the TV screen.
PROG.
2 Press 2/3to move
to
.
Screen example for DVD AUDIO
GROUP 1 TRACK 1
PROG. RND.
STOP
-.-Mbps
Playing back a bonus group of a DVD
AUDIO disc
OFF
TRACK
-/1
PAGE -/-
3 Press ENTER.
The program table appears.
The [PRGM] indicator lights up in the display window.
Some DVD AUDIO discs contain a special group called “bonus
group” whose contents are not opened to the public. The bonus
group is assigned to the last group of a disc.
To play back a bonus group, you have to enter a specific “key
number” for the bonus group. A way of getting the key number
depends on discs.
4-a (for DVD AUDIO)
Press the numeric buttons to specify
selections in the desired order by group
and track numbers.
For each program step, specify a group first, then specify a
track.
To specify track 14 in group 2: press 2, +10, then 4.
1 In stop mode, press the numeric buttons to
select the bonus group numer (the last
group).
4-b (for SVCD/Video CD/Audio CD)
Press the numeric buttons to specify tracks
in the desired order.
The display window and on-screen display prompt you to
enter the key number.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
On the TV screen
KEY _ _ _ _
(Program table example for DVD AUDIO)
The total program time
2 Press the numeric buttons to enter the key
number.
Total Program Time
00:25:12
PROGRAM
If you entered the correct key number, the unit starts
playback of the bonus group.
If you entered a wrong key number, you are prompted to
enter the correct key number.
No.
Group
TrackDisc
1
2
3
4
5
6
7
8
9
2
3
7
4
3
5
6
1
-
-
-
-
-
-
-
9
12
6
8
6
5
4
2
3
4
6
14
20
To dismiss the key number entry display
Press 7, open the disc tray, or turn the power off.
10
NOTES
• Once you enter the correct key number, the unit memorizes it
until you turn off the power or open the disc tray.
• If you specify a track in the bonus group for the program
playback, you will also be prompted to enter the key number
during program play.
USE NUMERIC KEYS TO PROGRAM TRACKS.
CANCEL DELETES THE LAST STEP. 7DELETES ALL.
Selected track number
• In the random playback, tracks in the bonus group are not
played back.
To correct the program
Press 5/∞to move
to the track to be corrected, then
press TV/VIDEO - CANCEL. The track is erased and the
subsequent programmed tracks move up.
Pressing 7clears all the programmed tracks.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
5 Press 3to start program playback.
To play back in random order (Random play)
With an Audio CD disc, the program table remains on the TV
screen during program playback. (Pressing ON SCREEN
brings up the status bar.)
When all of the programmed tracks have finished playback,
the unit stops and the program table appears again.
Note that the program remains.
• During program playback, you cannot edit the program
contents.
1 In stop mode, press ON SCREEN twice.
The menu bar appears on the TV screen.
RND.
2 Press 2/3to move
to
.
To check the program contents
Screen example for Audio CD
During playback, press 7. Playback stops and the program table
TRACK 33 TIME 25:58
is shown.
OFF
PROG. RND.
When the unit is playing back an Audio CD and the program table
is not shown, you can bring up the table by carrying out steps 1 to
3.
During DVD AUDIO/SVCD/Video CD playback, you can check
the program contents via the menu bar.
3 Press ENTER.
The unit starts random playback.
With a DVD AUDIO/SVCD/Video CD disc, the menu bar is
automatically dismissed.
During random playback, the [RND] indicator lights up in the
display window.
After playing all tracks of the disc, the unit stops the disc and
exits the random playback mode.
To stop program playback
Press 7.
To clear the program
While stopped and the program table is shown, press 7.
To stop and quit random playback
Press 7. The unit stops playback and exits the random playback
mode.
To exit the program mode
After clearing the program, press ON SCREEN.
NOTE
NOTES
In the random playback mode with a DVD AUDIO disc, tracks in
the bonus group are not played back.
• When the disc tray is opened or the unit is turned off, the
program is cleared.
• If you are going to program a track in the bonus group of a DVD
AUDIO, the unit will prompt you to enter the key number for the
bonus group.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
NOTE
The repeat playback may not work with some discs, even if you
select one of the repeat modes.
To repeat a desired part (A-B repeat
playback)
5/∞/2/3
ON SCREEN
ENTER
7
3
ANGLE
First make sure:
• The unit is in playback mode except SVCD/Video CD playback
with PBC.
AUDIO - fs/Rate
REPEAT
SUBTITLE
1 Press ON SCREEN twice.
The menu bar appears on the TV screen.
2 Press 2/3to move
to
, then press
ENTER.
Repeat playback
The pull-down menu for repeat mode selection appears.
Screen example for DVD VIDEO
To repeat the current selection or all tracks
TITLE 33 CHAP 33 TOTAL 1:25:58
1/3 1/5 1/3
8.5Mbps
CHAP.
CHAPTER
For DVD AUDIO/DVD VIDEO: During playback
For SVCD/Video CD/Audio CD: In any condition except SVCD/
Video CD playback with PBC
3 Press 5/∞to select [A-B].
Press REPEAT.
If you press REPEAT in stop mode, press 3to start
playback.
Each time you press REPEAT, the repeat mode cycles
among All repeat, Repeat 1 and off.
The indication on the display window shows the selected
repeat mode.
4 Press ENTER at the beginning of the part you
want to repeat (point A).
The pull down menu disappears.
A-
The repeat icon shows
.
5 Press ENTER at the end of the part you want
to repeat (point B).
: Repeats the current group for DVD AUDIO, the current
title for DVD VIDEO or all tracks for SVCD/Video CD/
Audio CD.
A-B
The repeat icon shows
The unit locates “A” and starts repeat playback between “A”
and “B.”
.
1: Repeats the current chapter for DVD VIDEO or the
current track for DVD AUDIO/SVCD/Video CD/Audio CD.
No indication: The repeat mode is off.
The [
] indicator lights in the display window.
To quit A-B repeat playback
A window which indicates the current repeat mode will be
displayed on the TV screen. The mode indication on the window
is same as the one on the menu bar.
A-B
Press 2/3to move
to
, and press ENTER. The A-B
repeat mode turns off, then normal playback continues.
(Repeat mode example on the TV screen)
NOTE
CHAP
The A and B points must be set in the same title/group/track.
To stop repeat playback
Press 7.
When a DVD AUDIO/DVD VIDEO disc is set, the unit stops
playback and quits the repeat mode.
When an SVCD, Video CD or Audio CD disc is set, the unit stops
playback but does not quit the repeat mode.
To quit repeat playback
Press REPEAT until the repeat mode indicator goes off in the
display window.
Hint
When the program playback mode is active with a DVD AUDIO,
SVCD, Video CD or Audio CD, the repeat mode changes in the
same manner.
Note, however, that in the “
” mode the unit repeats all the
programmed tracks instead of all tracks on the disc.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
2 Press 5/∞or AUDIO - fs/Rate to select the
desired audio.
Changing the language, sound and
scene angle
Each time you press 5/∞or AUDIO - fs/Rate, the audio
changes.
For DVD AUDIO/DVD VIDEO (example)
To select the subtitle language (SUBTITLE)
1/3 ENGLISH
2/3 FRENCH
3/3 SPANISH
For SVCD
ST1
ST2
L- 1
L
R-1
L- 2 R-2
Some DVD VIDEO and SVCD discs contain more than one
subtitle language. You can choose a desired one from them.
For Video CD
Hint
ST (Stereo)
R
At the beginning of the part where the subtitles are recorded,
appears on the TV screen (except when the [ON SCREEN
GUIDE] preference is set to [OFF]).
3 Press ENTER.
You can hear the selected audio.
The audio selection window is dismissed.
1 During playback, press SUBTITLE.
The subtitle selection window appears on the TV screen.
NOTES
1/3
• The audio selection window will automatically disappear if you
do not change the audio for several seconds.
• For DVD VIDEO, the selected language may be abbreviated on
the TV screen. See “Appendix B: Table of languages and their
abbreviations” on page 50.
ENGLISH
• Simply press the AUDIO - fs/Rate button, and do not hold it
down for a few seconds; otherwise the sampling frequency and
quantization bit length will be displayed.
2 Press 5/∞or SUBTITLE to select the subtitle.
Each time you press 5/∞or SUBTITLE, the subtitle
language changes.
3 Press ENTER.
To select a scene angle of DVD VIDEO
(ANGLE)
Subtitles are displayed in the selected language.
The subtitle selection window is dismissed.
NOTES
• An SVCD disc can have up to four subtitles. Pressing 5/∞
cycles through those channels regardless of whether the
subtitles are recorded or not.
• The subtitle selection window will automatically disappear if you
do not change the subtitle for several seconds.
• For DVD VIDEO, the selected language may be abbreviated on
the TV screen. See “Appendix B: Table of languages and their
abbreviations” on page 50.
You can enjoy a variety of scene angles if the DVD VIDEO disc
contains “multi-angle” parts, where multiple cameras were used
to shoot the same scene from different angles.
Hint
At the beginning of a “multi-angle” part,
appears on the TV
screen (except when the [ON SCREEN GUIDE] preference is set
to [OFF]).
To change the audio language or sound
(AUDIO)
1 During playback, press ANGLE.
The angle selection window appears on the TV screen.
1/3
1
The audio selection setting allows you to change the audio
language of a movie, or to listen to karaoke with or without the
vocal.
2 Press 5/∞or ANGLE to select the desired
angle.
Hint
At the beginning of the part where multiple audio tracks are
Each time you press 5/∞or ANGLE, the angle changes.
recorded,
appears on the TV screen (except when the [ON
SCREEN GUIDE] preference is set to [OFF]).
3 Press ENTER.
You can see the picture from the selected angle.
The angle selection window is dismissed.
1 During playback, press AUDIO - fs/Rate.
The audio selection window appears on the TV screen.
NOTE
1/3
The angle selection window will automatically disappear if you do
not change the angle for several seconds.
ENGLISH
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
2 Press 2/3to select the desired preset.
Each time you press the button, the VFP mode changes as
follows.
Set the video type most suitable to the current program or the
room conditions.
NORMAL
CINEMA
USER 1
USER 2
5/∞/2/3
Selected preset
ENTER
USER 1
VFP-PROGRESSIVE
SCAN
3D PHONIC
ZOOM
GAMMA
+
4
4
BRIGHTNESS
CONTRAST
+
AUDIO - fs/Rate
+13
SATURATION +13
TINT
+13
SHARPNESS
Y DELAY
+
+
3
2
Special picture/sound effect
Parameter
[NORMAL]: for watching TV in a general room.
[CINEMA]: for watching a movie software in a room with
suppressed light.
To zoom in pictures
[USER 1] [USER 2]: you can adjust parameters that affect
the picture character and store the settings as a user
preset. See the next step.
1 During playback or while paused, press
3 To define a user setting, press 5/∞ to select
ZOOM.
a parameter to be edited from the following.
Pressing ZOOM causes the unit to zoom in on the image.
At the top left of the screen, the information for the current
magnification appears for about 5 seconds.
Each time you press ZOOM, the magnification is doubled
(1.8, 4, 8, 16, 32 and 64 times).
• GAMMA
Adjust this if the neutral color is bright or dark. The
brightness of dark and bright portion is maintained.
Available range: –4 (darkest) to +4 (brightest).
• BRIGHTNESS
Adjust this if the picture is bright or dark on the whole.
Available range: –16 (darkest) to +16 (brightest).
• CONTRAST
ZOOM x 4
Adjust this if the far and near position is unnatural.
Available range: –16 to +16.
• SATURATION
When a picture of a DVD VIDEO disc is viewed on a normal
TV screen (4:3, Letter Box), black bars may appear at the top
and bottom of the screen. In this case, if you select the
“ZOOM x1.8” mode, the black bars become almost invisible.
When a 1:2.35 or 1:1.85 DVD VIDEO source is played back,
however, the black bars are visible on the screen.
Adjust this if the picture is whitish or blackish.
Available range: –16 (blackest) to +16 (whitest).
• TINT
Adjust this if the appearance of flesh tone is unnatural.
Available range: –16 to +16.
• SHARPNESS
Adjust this if the picture is indistinct.
Available range: 0 to +3.
• Y DELAY
Adjust this if the picture looks separately/overlapped.
Available range: –2 to +2.
2 Press 5/∞/2/3to move the zoomed position.
To return to the normal playback
Press ENTER.
4 Press ENTER.
NOTE
A window for setting parameters appears.
While zoomed, the picture may look coarse.
SATURATION
+ 4
To adjust the picture character (VFP)
Selected parameter
5 Press 5/∞ to adjust the level of the
parameter.
The VFP (Video Fine Processor) function allows you to adjust the
picture character according to the type of programming, picture
tone or personal preferences.
The higher value enhances the effect.
6 Press ENTER.
1 During playback, press VFP - PROGRESSIVE
SCAN.
Repeat steps 3 to 6 if you want to set other parameters.
The VFP mode selection window appears on the TV screen.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
To dismiss the VFP mode selection window
Press VFP - PROGRESSIVE SCAN.
Checking the sampling frequency and
quantization bit length
NOTES
• The window for VFP mode selection and parameter setting
disappear if no operation is made for about 10 seconds.
• Simply press the VFP - PROGRESSIVE SCAN button, and do
not hold it down for a few seconds; otherwise the Progressive
scanning mode will be changed, if the VIDEO SIGNAL
SELECTOR on the rear of the unit is set to “REMOTE.”
You can check the sampling frequency and quantization bit
length of digital audio during playback.
During playback, press and hold down
AUDIO - fs/Rate for a few seconds.
The sampling frequency and quantization bit length of the
current digital audio are shown in the display window
temporarily. When the audio is recorded using a surround
audio format, the sampling frequency and quantization bit
length are shown for the front speakers.
To simulate surround sound (3D PHONIC)
Using the 3D PHONIC function, you can get a simulated
surround effect from your stereo system.
(Example)
1 During playback, press 3D PHONIC.
Quantization bit length
The 3D PHONIC window appears on the TV screen.
2 Press 2/3 to select the desired mode.
Each time you press the button, the 3D PHONIC mode
changes as follows:
Sampling frequency
ACTION
DRAMA
THEATER
NONE
The sampling frequencies indicated are as follows:
44.1, 48, 88.2, 96, 176.4, and 192 (kHz). Note that any figure
below the first decimal place is omitted in the display window.
ACTION
4
NOTES
Selected effect mode
• With some discs, [NO INFO.] may appear instead of the
sampling frequency and quantization bit length.
• The sampling frequency and quantization bit length cannot be
displayed with VR format discs.
• ACTION
Suitable for action movies and sports programs in which the
sound source moves.
• DRAMA
Natural and warm sound. You can enjoy movies in a relaxed
mood.
• THEATER
You can enjoy sound effects like in a theater.
3 Press 5/∞to adjust the effect level.
You can set the effect level from [1] to [5].
The higher value enhances the effect.
To dismiss the 3D PHONIC window
Press 3D PHONIC.
NOTES
• The 3D PHONIC window disappears if no operation is made for
about 10 seconds.
• The 3D PHONIC function works correctly only when playing
back a DVD VIDEO disc recorded with Dolby Digital.
• When playing back a DVD VIDEO disc recorded with Dolby
Digital that does not contain the rear signal, you can change the
3D PHONIC setting, but you will not be able to achieve a correct
3D effect.
• The 3D PHONIC function does not affect the Dolby Digital
bitstream signal from the DIGITAL OUT jack.
• When the 3D PHONIC function is active, the [ANALOG OUT]
setting in the [AUDIO] setting display is not available.
• When one of the 3D PHONIC modes is activated, the [3D]
indicator lights up in the display window.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
The indication on the rightmost end of the status bar shows the
unit’s transport status as follows:
Playback mode.
Stop mode.
2/3
Pause mode.
ENTER
Fast forward/backward playback mode.
Slow motion playback mode.
ON SCREEN
To dismiss the menu bar and status bar
Press ON SCREEN.
Basic operation procedure
Menu bar functions
1 Press 2/3to select the icon you want to
work with.
The selected icon is pointed by
.
To bring up the menu bar
2 Press ENTER.
1 When a disc is inserted, press ON SCREEN.
With many icons, an appropriate pull-down window appears,
however, there are some exceptions.
A status bar for the type of disc inserted will appear on the TV
screen.
See page 12 for details about the status bar.
NOTES
• A mark or text on the menu icon for the function or mode
currently selected is shown in green.
• Some functions are not available during playback. (You cannot
2 Press ON SCREEN again.
A menu bar for the type of disc inserted will appear under the
status bar.
(for DVD AUDIO)
move
to the associated icon when it is not available.)
GROUP 3 TRACK 33 TOTAL 1:25:58
PROG. RND. 1/3 PAGE 32/32
8.5Mbps
OFF
TRACK
(for DVD VIDEO)
(for DVD-R/RW written in the DVD VIDEO format)
TITLE 33 CHAP 33 TOTAL 1:25:58
8.5Mbps
OFF
CHAP.
1/3
1/5
1/3
(for SVCD)
TRACK 33 TIME
25:58
OFF
PROG. RND.
PROG. RND.
PROG. RND.
ST1
-/4
(for Video CD)
TRACK 33 TIME
25:58
25:58
OFF
ST
(for Audio CD)
TRACK 33 TIME
OFF
(for DVD-RAM/DVD-RW written in the VR format)
VVRR
PG 33 CHAP 33 TIME
1:25:58
8.5Mbps
OFF
PG
ST
OFF
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Menu bar functions for DVD VIDEO
Menu bar functions for DVD AUDIO
Time mode selection
Time mode selection
During playback, selects the time mode shown in the display
window and in the status bar.
During playback, selects the time mode shown in the display
window and in the status bar.
Press ENTER to select the time mode from the following.
• TIME: Current track elapsed time
Press ENTER to select the time mode from the following.
• TOTAL: Current title elapsed time
• REM: Currect track remaining time
• TOTAL: Current group elapsed time
• T.REM: Current group remaining time
• T.REM: Current title remaining time
• TIME: Current chapter elapsed time
• REM: Current chapter remaining time
Repeat mode (See also page 20)
Repeat mode (See also page 20)
Selects the repeat mode during playback.
Selects the repeat mode during playback.
1. Open the pull-down window.
1. Open the pull-down window.
2. Press 5/∞to select the repeat mode from the following.
• TRACK: Current track repeat
2. Press 5/∞to select the repeat mode from the following.
• CHAPTER: Current chapter repeat
• GROUP:Current group repeat
• TITLE:
• A-B:
Current title repeat
A-B repeat
• A-B:
A-B repeat
• OFF:
Repeat mode deactivated
• OFF:
Repeat mode deactivated
3. Press ENTER to make the selected repeat function active.
3. Press ENTER to make the selected repeat function active.
Time search (See also page 17)
Time search (See also page 17)
Specifies a time from the beginning of the current group as the
point from which to begin playback.
Specifies a time from the beginning of the current title as the
point from which to begin playback.
TRACK
CHAP.
Track search
Chapter search
During playback, specifies a desired track to be played back from.
During playback, specifies a desired chapter to be played back
from.
1. Open the pull-down window.
2. Press numeric buttons (0 to 9) to enter a desired track number.
(For example, to specify “10,” press 1, then 0.)
3. Press ENTER to begin playback from the specified track.
1. Open the pull-down window.
2. Press numeric buttons (0 to 9) to enter a desired chapter
number. (For example, to specify “10,” press 1, then 0.)
3. Press ENTER to begin playback from the specified chapter.
PROG.
Program playback (See also pages 18 and 19)
Audio selection (See also page 21)
While stopped, specifies the playback order of tracks.
During playback, selects the audio language or sound track.
RND.
Random playback (See also page 19)
1. Open the pull-down window.
2. Press 5/∞to select a desired audio language or sound track.
3. Press ENTER to begin playback with the selected audio.
While stopped, activates random playback.
Audio selection (See also page 21)
During playback, selects the audio language or sound track.
Subtitle selection (See also page 21)
During playback, selects the subtitle language.
1. Open the pull-down window.
2. Press 5/∞to select a desired audio language or sound track.
3. Press ENTER to begin playback with the selected audio.
1. Open the pull-down window.
2. Press 5/∞to select a desired subtitle language.
3. Press ENTER to begin playback with the selected subtitle.
PAGE
Page selection (See also page 17)
Angle selection (See also page 21)
During playback, selects a desired scene angle in a multi-angle
part.
During playback, selects the page.
1. Open the pull-down window.
2. Press 5/∞to select a desired page number.
3. Press ENTER to play back with the selected page.
1. Open the pull-down window.
2. Press 5/∞to select a scene angle.
3. Press ENTER to begin playback with the selected scene angle.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Menu bar functions for SVCD/Video CD/
Audio CD
Menu bar functions for DVD-RAM/DVD-RW
written in the VR format
Time mode selection
Time mode selection
Selects the time mode shown in the display window and in the
status bar.
Selects the time mode shown in the display window and in the
status bar.
Press ENTER to select the time mode from the following.
• TIME: Current track elapsed time
• REM: Current track remaining time (while in stop mode,
current track total time)
Press ENTER to select the time mode from the following.
• TIME:
• REM:
Current title/play list elapsed time
Current title/play list remaining time
• TOTAL: Disc elapsed time
• T.REM: Disc remaining time (while in stop mode, disc total time)
Repeat mode (See also page 29)
Selects the repeat mode.
Repeat mode (See also page 20)
1. Open the pull-down window.
Selects the repeat mode.
2. Press 5/∞to select the repeat mode from the following.
1. Open the pull-down window.
For original playback
2. Press 5/∞to select the repeat mode from the following.
• TRACK: Current track repeat
• PG: Current title repeat
• ALL: All titles repeat
• ALL:
• A-B:
• OFF:
All track repeat
A-B repeat
Repeat mode deactivated
• OFF: Repeat mode deactivated
For playback by play list
3. Press ENTER to make the selected repeat function active.
• PL:
Current play list repeat
• OFF: Repeat mode deactivated
Time search (See also page 17)
Specifies a time from the beginning of the disc as the point from
which to begin playback.
PG
PL
Original program title search
Play list search
During playback, specifies a desired title (for original playback) or
play list (for playback by play list) to be played back from.
PROG.
Program playback (See also pages 18 and 19)
While stopped, specifies the playback order of tracks.
1. Open the pull-down window.
2. Press numeric buttons (0 to 9) to enter a desired title or play
list number.
(For example, to specify “10,” press 1, then 0.)
3. Press ENTER to begin playback from the specified title/play
list.
RND.
Random playback (See also page 19)
While stopped, activates random playback.
Audio selection (See also page 21)
During SVCD/Video CD playback, selects the audio channel(s).
Audio selection (See also page 30)
During playback, selects the audio channel.
1. Open the pull-down window.
2. Press 5/∞to select a desired audio channel(s).
3. Press ENTER to play back with the selected audio channel(s).
1. Open the pull-down window.
2. Press 5/∞to select a desired audio track.
3. Press ENTER to begin playback with the selected audio.
Subtitle selection (See also page 21)
During SVCD playback, selects the subtitle.
Subtitle on/off (See also page 30)
During playback, turns on or off the subtitle display.
1. Open the pull-down window.
2. Press 5/∞to select a desired subtitle.
3. Press ENTER to begin playback with the selected subtitle.
1. Open the pull-down window.
2. Press 5/∞to select “ON” or “OFF.”
3. Press ENTER.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
VR format disc playback
To stop in the middle of playback
Press 7.
Playback is interrupted.
If the resume mode is set to “ON,” the unit memorizes the
interrupted position.
Numeric
buttons
NOTE
The “DISC RESUME” mode is not available for VR format discs.
Even if you set [RESUME] to [DISC RESUME], the resume mode
will be the same as when [RESUME] is set to [ON].
4
¢
8
7
To resume playback
Press 3(SELECT).
3(SELECT)
If [RESUME] is set to [ON] and an interrupted position is
memorized, playback re-starts from the interrupted position.
If no interrupted position is memorized, or [RESUME] is set
to [OFF], playback re-starts from the beginning of the title 1.
To select the next or previous title in stop mode
Press ¢or 4.
NOTE
The next or previous title will be selected. In this case, press
3(SELECT) to start playback of the selected title.
Make sure that the TV - DVD switch on the
remote control unit is set to “DVD” when
using the 5/∞/2/3and numeric buttons
for controlling the unit.
TV
DVD
To select the next or previous chapter/title during
playback
Press ¢to skip to the next chapter (if a title is divided into
chapters) or to the next title.
Press 4to return to the beginning of the current chapter/title.
Press 4repeatedly to skip back to the previous chapter/title.
About VR format discs
The unit can play back DVD-RAM and DVD-RW discs written in
the VR format. We refer to such discs as a “VR format disc” in
this manual.
Various speed playback
To advance or reverse playback rapidly
During playback, press ¡or 1.
What you cannot do with VR format discs
Note that the following operations cannot be made with VR
format discs:
• Resuming playback with the resume mode set to “DISC
RESUME”
• Advancing a still picture frame by frame
• Reverse slow motion playback
• Replaying the previous scenes (one touch replay function)
• Locating a desired position by specifying the time (time search)
You can select from 1.5 times, 5 times, 20 times and 60 times
normal speed.
• When you select 1.5 times normal speed playback, the disc is
played back with sound.
To advance or reverse playback at 5 times normal speed
Hold down ¢or 4.
To play back in forward slow motion
NOTE
First press 8to enter the pause mode, and then press ¡.
The forward slow motion playback will be activated. You can
select from 1/32 times, 1/16 times, 1/4 times and 1/2 times
normal speed.
There are two types of commercially available DVD-RAM discs;
one with a cartridge and the other without a cartridge.
The unit can play back DVD-RAM discs without a cartrdge, and
discs with a cartridge that can be removed from their cartridge
(Type 2 and Type 4).
NOTE
The actual playback speed may be different from the speed
shown on the TV screen, depending on the recording condition.
Basic operations
To start playback of the desired title
Press one of the numeric buttons to specify number of the
desired title.
Original playback
In original playback, contents on a VR format disc are played
back in the order the contents are recorded.
When inserting a VR format disc, after the disc contents are read,
the original playback starts.
When the last title has been played back, the unit stops playback
automatically.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
VR format disc playback
Playback by play list
In playback by play list, contents on a VR format disc are played
back according to the way they were edited while recording.
Numeric
buttons
When inserting a VR format disc, after the disc contents are read,
the original playback starts.
MENU
5/∞/2/3
ON SCREEN
TOP MENU
ENTER
Press MENU.
The PLAY LIST display appears on the TV screen, and
playback by play list starts.
4
7
¢
8
PLAY LIST
3(SELECT)
CREATED
CHAP. LENGTH
REPEAT
01 2003/01/23
02 2003/01/23
03 2003/01/23
04 2003/01/23
05 2003/01/23
06 2003/01/23
07 2003/01/23
08 2003/01/23
09 2003/01/23
10 2003/01/23
11 2003/01/23
12 2003/01/23
001
003
004
006
008
010
012
008
008
008
008
008
0:10:51
0:23:00
0:18:30
0:08:05
0:00:10
0:18:27
0:34:08
0:09:58
0:16:15
0:24:01
0:05:43
0:27:31
To call up the ORIGINAL PROGRAM display
During playback, press TOP MENU.
The ORIGINAL PROGRAM display appears on the TV
screen.
As the PLAY LIST display appears, playback of play list 1 starts.
When the last play list has been played back, the unit stops
playback automatically.
While the PLAY LIST display is shown, you can perform the
following operations.
• Start playback of a desired play list by designating it using 5/∞
on the PLAY LIST display.
• Go to the next play list or return to the previous play list by
pressing 4/¢.
• Turn off the PLAY LIST display by pressing MENU (playback
continues).
ORIGINAL PROGRAM
REC. DATE
CH
REC.TIME
01 2003/01/23
02 2003/01/23
03 2003/01/23
04 2003/01/23
05 2003/01/23
06 2003/01/23
07 2003/01/23
08 2003/01/23
09 2003/01/23
10 2003/01/23
11 2003/01/23
12 2003/01/23
50
51
52
53
54
55
60
61
62
63
64
65
02:51 AM
03:20 AM
03:50 AM
04:15 AM
05:00 AM
05:38 AM
06:50 AM
07:28 AM
09:05 AM
10:50 AM
11:08 AM
11:51 AM
• Stop playback by pressing 7 (the PLAY LIST display
disappears).
NOTE
If you press TOP MENU during playback by play list, the
ORIGINAL PROGRAM display appears on the TV screen, and
the unit enters original playback status (playback starts from title
1).
While the ORIGINAL PROGRAM display is shown, you can
perform the following operations.
• Start playback of a desired title by designating it using 5/∞on
the ORIGINAL PROGRAM display.
• Go to the next title or return to the previous title by pressing
4/¢.
• Turn off the ORIGINAL PROGRAM display by pressing TOP
MENU (playback continues).
To stop in the middle of playback
Press 7.
Playback is interrupted.
• Stop playback by pressing 7(the ORIGINAL PROGRAM
display disappears).
If the resume mode is set to “ON,” the unit memorizes the
interrupted position.
NOTE
NOTE
If you press MENU during original playback, the PLAY LIST
display appears on the TV screen, and the unit enters playback
by play list (see the following description).
The “DISC RESUME” mode is not available for VR format discs.
Even if you set [RESUME] to [DISC RESUME], the resume mode
will be the same as when [RESUME] is set to [ON].
To resume playback
Press 3(SELECT).
If [RESUME] is set to [ON] and an interrupted position is
memorized, playback re-starts from the interrupted position.
If no interrupted position is memorized, or [RESUME] is set
to [OFF], the unit returns to the original playback status, and
playback re-starts from the title 1.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
VR format disc playback
To select the next or previous chapter/play list
during playback
Press ¢to skip to the next chapter (if a play list is divided into
chapters) or to the next play list.
Repeat playback
Press 4to return to the beginning of the current chapter/play
list.
To repeat title or play list
Press 4repeatedly to skip back to the previous chapter/play
list.
During playback, press REPEAT.
Each time you press REPEAT, one of the following repeat
mode is selected.
For original playback
Various speed playback
PG: Repeats the current title.
ALL: Repeats all titles on the disc.
OFF: Deactivates the repeat mode.
For playback by play list
PL: Repeats the current play list.
OFF: Deactivates the repeat mode.
To advance or reverse playback rapidly
During playback, press ¡or 1.
You can select from 1.5 times, 5 times, 20 times and 60 times
normal speed.
• When you select 1.5 times normal speed playback, the disc is
played back with sound.
A window which indicates th current repeat mode will be
displayed on the TV screen. The mode indication on the window
is same as the one on the menu bar.
To advance or reverse playback at 5 times normal speed
Hold down ¢or 4.
(Repeat mode example on the TV screen)
To play back in forward slow motion
First press 8to enter the pause mode, and then press ¡.
The forward slow motion playback will be activated. You can
select from 1/32 times, 1/16 times, 1/4 times and 1/2 times
normal speed.
PG
On the display window, the following indication appears:
1: When “PG” or “PL” repeat mode is selected.
NOTE
:
When “ALL” repeat mode is selected.
The actual playback speed may be different from the speed
shown on the TV screen, depending on the recording condition.
To stop repeat playback
Press REPEAT to select “OFF.”
Alternatively, press 7to stop playback.
To start playback of the desired play list
Press one of the numeric buttons to specify number of the
desired play list.
The repeat mode will be deactivated.
NOTE
You can change the repeat mode using the menu bar.
First bring up the menu bar (see page 24), then follow the steps
described on page 26.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
VR format disc playback
Turning on/off the subtitle
You can turn on or off the subtitle recorded on a VR format disc.
1 During playback, press SUBTITLE.
The subtitle selection window appears on the TV screen.
OFF
5/∞
ON
ENTER
2 Press 5/∞or SUBTITLE to select [ON] or
[OFF].
AUDIO - fs/Rate
SUBTITLE
3 Press ENTER.
The subtilte is turned on or off, according to the selection you
made at step 2.
The subtilte selection window is dismissed.
Changing the sound
The audio selection setting allows you to change the audio
track(s) to be played back from among stereo, L (left channel)
and R (right channel).
1 During playback, press AUDIO - fs/Rate.
The audio selection window appears on the TV screen.
ST
ST
2 Press 5/∞or AUDIO - fs/Rate to select the
desired audio.
ST (Stereo)
L
R
3 Press ENTER.
You can hear the selected audio.
The audio selection window is dismissed.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA disc playback
• As for WMA files, make sure that the copyright feature is set to
off.
• As for WMA files, we recommend you to record your material at
a bit rate of 64 kbps or higher.
Numeric
buttons
Basic operations
Use the following buttons to control MP3/WMA disc playback.
2
5/∞
ENTER: Starts playback while stopped.
3(SELECT): Starts playback while stopped or paused.
4
7
¢
8
7:
Stops playback.
Pauses playback.
Skips back or forward a track during playback.
Selects the previous or next track while stopped.
3(SELECT)
8:
4/¢:
If you press 3(SELECT) during playback, or press 7to stop
playback followed by 3(SELECT), the unit starts playback from
the beginning of the current track.
NOTE
Make sure that the TV - DVD switch on the
remote control unit is set to “DVD” when
using the 5/∞/2/3and numeric buttons
for controlling the unit.
NOTES
TV
DVD
• The unit does not support “packet writing (UDF format)” discs.
• The unit does not support the ID3 tag and WMA tag.
• The unit supports discs recorded with multiple sessions.
• Some discs may not play due to disc characteristics or
recording conditions.
• Programmed and random playback functions do not work with
MP3/WMA discs.
Operations
• As for MP3, the unit only can play back tracks with the following
file extensions; “.MP3,” “.Mp3,” “.mp3” and “.mP3.”
• As for WMA, the unit only can play back tracks with the
following file extensions; “.WMA,” “.wma,” and any other
combination of upper case and lower case letters (such as
“.Wma”).
• Time required for reading the disc contents may vary for
different discs, depending on the numbers of groups (folders)
and tracks (files) recorded, etc.
The unit can play back MP3 files and WMA files on a home
recorded CD-R/RW disc or commercially available CD. We refer
to a disc that contains MP3 and/or WMA files as an “MP3/WMA
disc” in this manual.
Note that if a disc contains both of MP3/WMA files and JPEG
files, you can only play back files of the type selected by the
[MP3&WMA/JPEG] setting in the [PICTURE] preference display
(see page 38).
• You cannot advance or reverse playback by pressing ¡or
1, or by holding down ¢or 4during MP3/WMA disc
playback.
• The unit supports WMA files recorded with a bit rate of 48 kbps
or higher. The unit cannot play back WMA files recorded with a
bit rate under 48 kbps.
About MP3/WMA discs
On an MP3/WMA disc, each song is recorded as a file (track).
Files are sometimes grouped into folders by artists, album, etc.
• Each file is regarded as a track.
• A folder which has one or more files is regarded as a group.
• A folder which does not directly contain any tracks is ignored.
• Files which do not belong to any folder are grouped into “group
1.”
• The unit recognizes up to 150 tracks per group, and up to 99
groups per disc. If there are files other than MP3/WMA files,
they also count in the 150-file total.
Selecting the desired group and track
When inserting an MP3/WMA disc, after the disc contents are
read, the MP3/WMA CONTROL display automatically appears on
the TV screen.
You can specify the desired group/track from the display using
the following procedure.
Max. 99 groups per disc
1 Make sure that the black (cursor) bar is in the
Track 1.mp3
Track 2.mp3
Track 3.mp3
left (group) column.
Group 1
If it is in the right column, press 2to move it to the left
column.
2 Press 5/∞to move the bar to a desired
group.
Group 2
On the right column, tracks in the selected group are shown.
Track 4.mp3
Track 5.mp3
Track 6.mp3
3 Press 4/¢to select a desired track, then
press ENTER or 3(SELECT).
Group 4
or
Group 3
Max.150 tracks
per group
Press the numeric buttons to directly specify
a desired track number.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
Notes for making your own MP3/WMA disc using a
CD-R/CD-RW disc
• Select “ISO 9660” as the disc format.
• As for MP3 files, we recommend you to record your material at
a 44.1 kHz sampling rate, using the 128 kbps data transfer rate.
The unit starts playback from the selected track.
(to be continued)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA disc playback
3 Press the numeric buttons to specify a
desired track number.
To select 5: press 5.
Numeric buttons
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
The unit starts playback from the specified track.
TITLE/GROUP
Repeat playback
5/∞
3
ENTER
During playback or while stopped, press
REPEAT.
Each time you press REPEAT, the repeat mode changes as
follows.
If you press REPEAT while stopped, you need to press
ENTER or 3(SELECT) to start repeat playback.
7
3(SELECT)
AUDIO - fs/Rate
REPEAT
MP3/WMA
CONTROL
display
Display
window
Function
(continued)
Current track elapsed time
REPEAT TRACK
REPEAT GROUP
REPEAT ALL
Repeats the current
track.
1
MP3/WMA CONTROL
Group : 01 / 10
Time : 00:03:08
Track : 01 / 06 (Total 28)
Repeats all tracks in
the current group.
spring
summer
fall
winter
sea
begonia.mp3
german chamomile.mp3
kiwi fruit.mp3
orchard grass.mp3
petunia.mp3
north pole.mp3
Repeats all tracks on
the disc.
mountain
camp
picnic
skiing
flower
No indication
(TV screen)
The repeat mode is off.
Selected repeat mode
MP3/WMA CONTROL
Group : 01 / 10
REPEAT TRACK
Track : 01 / 06 (Total 28)
Track column of the
current group
Group column
Selected track
spring
summer
fall
begonia.mp3
german chamomile.mp3
kiwi fruit.mp3
Hint
To stop repeat playback
Press 7. Note that the repeat mode remains active.
You can also select a desired track by pressing 3to move the
black bar to the right (track) column then using 5/∞.
NOTES
To quit repeat playback
During playback, press REPEAT until no repeat icon is shown on
the display window.
While stopped, press REPEAT until repeat mode indication on
the MP3/WMA CONTROL display goes off.
• If an MP3/WMA file name includes any 2-byte character, the
unit cannot show the file name correctly.
• Only MP3/WMA files are shown on the MP3/WMA CONTROL
display.
• The order of groups/tracks shown in the MP3/WMA CONTROL
display may differ from the order shown on your personal
computer when you set the disc on your computer.
NOTE
You can change the repeat mode using ON SCREEN on the
remote control unit.
Press ON SCREEN, and the repeat mode selection window
appears on the TV screen. Press then 5/∞to select the desired
repeat mode, and finally press ENTER to make the selected
repeat mode active.
Direct selection
You can select a desired group directly by specifying the group
number.
1 During playback or while stopped, press
TITLE/GROUP.
Checking the sampling frequency and
quantization bit length
You can check the sampling frequency and quantization bit
length of digital audio during playback using the AUDIO - fs/Rate
button.
[--] is shown in the group display area of the display window.
2 Press the numeric buttons to specify a
desired group number.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
For details, see page 23.
Specify the group number within several seconds after
pressing TITLE/GROUP (i.e. while the display window shows
[--]).
The unit starts playback from track 1 of the selected group.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG disc playback
Notes for making your own JPEG disc using a CD-R/
CD-RW disc
• Select “ISO 9660” as the disc format.
• We recommend you to record your material at a 640 x 480 pixel
resolution.
• This unit supports the baseline JPEG format.
Basic operations
MENU
5/∞/2/3
ENTER
¢
4
7
To see a desired picture
When inserting a JPEG disc, after the disc contents are read, the
JPEG CONTROL display automatically appears on the TV
screen.
JPEG CONTROL
Group : 01 / 10
File : 01 / 06 (Total 28)
spring
summer
fall
winter
sea
mountain
camp
begonia.jpg
german chamomile.jpg
kiwi fruit.jpg
orchard grass.jpg
petunia.jpg
north pole.jpg
NOTE
picnic
skiing
flower
Make sure that the TV - DVD switch on the
remote control unit is set to “DVD” when
using the 5/∞/2/3and numeric buttons
for controlling the unit.
TV
DVD
The unit can play back JPEG files on a home recorded CD-R/RW
disc. We refer to a disc that contains JPEG files as a “JPEG disc”
in this manual.
Note that if a disc contains both of MP3/WMA files and JPEG
files, you can only play back files of the type selected by the
[MP3&WMA/JPEG] setting in the [PICTURE] preference display
(see page 38).
You can select a desired file for playback via this display.
1 Make sure that the black (cursor) bar is in the
left (group) column.
If it is in the right column, press 2to move it to the left
column.
2 Press 5/∞ to move the bar to a desired
group.
On the right column, files in the selected group are shown.
About JPEG discs
On a JPEG disc, each picture is recorded as a file. Files are
sometimes grouped into folders by category, etc.
• A folder which has one or more files is regarded as a group.
• A folder which does not directly contain any files is ignored.
• Files which do not belong to any folder are grouped into “group
1.”
3 Press 4/¢ to select a desired file, then
press ENTER.
The selected file (still picture) is shown on the TV.
Hint
You can also select a desired file by pressing 3to move the black
bar to the right (file) column then using 5/∞.
• The unit recognizes up to 150 files per group, and up to 99
groups per disc. If there are files other than JPEG files, they
also count against the 150-file total.
NOTE
If the selected file is unplayable, a black screen appears.
Max. 99 groups per disc
To display another picture
Press 4/¢or 5/∞to select the desired picture.
File 1.jpg
File 2.jpg
File 3.jpg
Group 1
To dismiss the picture
Press 7or MENU.
The TV screen returns to the JPEG CONTROL display.
Group 2
File 4.jpg
File 5.jpg
File 6.jpg
Group 4
Group 3
Max.150 files
per group
33
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG disc playback
Viewing pictures continuously (slide
show mode)
You can see files (still pictures) one after another automatically.
To start the slide show
Numeric buttons
TITLE/GROUP
MENU
Press 3(SELECT).
The slide show starts from the beginning of the disc.
Each file (still picture) is displayed for approximately 3
seconds.
5/∞/2/3
ENTER
4
¢
7
8
3(SELECT)
ZOOM
To stop slide show playback in the middle
Press 7or MENU.
The TV screen returns to the JPEG CONTROL display.
Pressing 3(SELECT) resumes slide show playback from the last
picture displayed.
REPEAT
To keep showing the current picture
Press 8or ENTER.
Pressing 3(SELECT) resumes the slide show playback.
NOTES
• The unit supports the baseline JPEG format.
• The unit does not support “packet writing (UDF format)” discs.
• The unit supports discs recorded with multiple sessions.
• The unit may not be able to read some discs, or may take a long
time to display a picture on the disc, due to disc characteristics,
recording conditions, or numbers of groups (folders), etc.
• Programmed and random playback functions do not work with
JPEG discs.
To select the start point of the slide show
From the JPEG CONTROL display
1 Make sure that the black (cursor) bar is in the
left (group) column.
• The screen saver function will be activated if the same picture is
displayed for more than 5 minutes except during slide show
playback.
If it is in the right column, press 2to move it to the left
column.
• The unit only can play back files with the following file
extensions; “.jpg,” “.jpeg,” “.JPG,” “.JPEG” and any other
combination of upper case and lower case letters (such as
“.Jpg”).
• If a JPEG file name includes any 2-byte character, the unit may
not show the file name correctly.
• If a picture has been saved at greater than 640 x 480 pixel
resolution, it may take some time to display the picture.
• The unit does not support pictures of more than 2400 pixels in
horizontal resolution. Make sure that the horizontal resolution of
the picture is 2400 pixels or less.
2 Press 5/∞ to move the bar to a desired
group.
3 Press 4/¢ to select a desired file.
4 Press 3(SELECT).
The slide show starts from the specified file.
Direct selection
1 During playback or while stopped, press
TITLE/GROUP.
To zoom in the picture
2 Press the numeric buttons to specify a
1 While in pause mode, press ZOOM.
desired group number.
Pressing ZOOM causes the unit to zoom in on the image.
Each time you press ZOOM, the manginication is doubled
(1.8, 4, 8, 16, 32 and 64 times).
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
2 Press 5/∞/2/3to move the zoomed position.
3 Press the numeric buttons to specify a
desired file number.
The unit starts slide show playback from the specified file.
If you do not specify a file, the unit starts slide show playback
from the first file in the group.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG disc playback
Repeat function
In the slide show mode, you can repeat playback of JPEG files in
a group or on the disc.
1 While the JPEG CONTROL display is shown,
press REPEAT.
Pressing REPEAT switches the repeat mode.
When the repeat mode is turned on, the [
in the display window.
] indicator lights
The selected repeat mode is shown on the JPEG CONTROL
display.
REPEAT ALL:All files on the disc are repeated.
REPEAT GROUP:All files in the current group are repeated.
No indication:The repeat mode is off.
2 Press 3(SELECT) to start repeat playback.
To stop repeat playback
Press 7.
The repeat mode remains active.
To quit repeat playback
Press 7or MENU while the JPEG CONTROL display is shown,
and press REPEAT until the repeat mode indication goes off.
NOTE
You can change the repeat mode using ON SCREEN on the
remote control unit.
Press ON SCREEN, and the repeat mode selection window
appears on the TV screen. Press then 5/∞to select the desired
repeat mode, and finally press ENTER to make the selected
repeat mode active.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
SPK.SETTING
SPK.SETTING
MODE
SIZE
5.1 CH.
DELAY
LEVEL
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
5/∞/2/3
ENTER
CHOICE
OTHERS
OTHERS
RESUME
ON
ON SCREEN GUIDE
AUTO STANDBY
ON
OFF
DVD1
AV COMPULINK MODE
PARENTAL LOCK
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
NOTE
How to set preferences
Make sure that the TV - DVD switch on the
remote control unit is set to “DVD” when
using the 5/∞/2/3and numeric buttons
for controlling the unit.
TV
DVD
1 Press CHOICE.
One of the preference on-screen displays appears on the TV
screen.
You can see five icons at the top right of the on-screen
display for the settings.
:LANGUAGE menu
:PICTURE menu
Selecting preferences
This section refers to the settings which are already made when
you purchase the unit. Read this section when you want to
connect this unit to a wide-vision TV set, or when you want to
otherwise change the settings according to your preferences and
viewing environment.
:AUDIO menu
:Setting menu for speakers
:OTHERS menu
2 Press 2/3to select the appropriate icon.
The appropriate display appears on the TV screen.
About the Preference display
The Preference display consists of the LANGUAGE, PICTURE,
AUDIO, SPK.SETTING and OTHERS setting displays, each
having setting items.
3 Press 5/∞to move
to select the item you
want to edit.
The color of the selected item changes.
LANGUAGE
4 Press ENTER.
A pull-down menu appears over the selected item.
LANGUAGE
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
OFF
LANGUAGE
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
OFF
ON SCREEN LANGUAGE
ENGLISH
ON SCREEN LANGUAGE
ENGLISH
ENGLISH
SPANISH
FRENCH
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
PICTURE
Selected item
PICTURE
MONITOR TYPE
4:3 LB
AUTO
PICTURE SOURCE
SCREEN SAVER
MP3&WMA/JPEG
5 Press 5/∞to select from the options then
ON
press ENTER.
MP3&WMA
The selected option is set.
• For details about each setting, see the following.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
To dismiss a preference display
Press CHOICE.
AUDIO
AUDIO
NOTES
DIGITAL AUDIO OUTPUT
ANALOG OUT
STREAM/PCM
MULTI CHANNEL
NORMAL
• While an MP3/WMA or JPEG disc is inserted, you cannot bring
up any preference display.
D RANGE CONTROL
OUTPUT LEVEL
STANDARD
• When a preference display is shown on a wide TV screen, the
upper and lower parts of the preference display sometimes may
be cut off. If this happens, adjust the picture size control of the
TV.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
• The [SPK.SETTING] display can be displayed only when
[ANALOG OUT] in the [AUDIO] preference display is set to
[MULTI CHANNEL].
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
LANGUAGE menu
MENU LANGUAGE
You can select the default menu language to be displayed if it is
contained on a DVD AUDIO/DVD VIDEO disc.
Setting options
ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN,
JAPANESE, language code from AA to ZU
[4:3 LB] (Letter Box conversion): select when you connect the
unit to a normal (4:3) TV.
• If the disc does not have a menu in the selected language, the
disc’s default language will be used.
• For details about language codes, see “Appendix B: Table of
languages and their abbreviations” on page 50.
When playing back a DVD VIDEO disc recorded in wide picture
format, the picture is shown with black bars at the top and
bottom.
• You cannot change the setting during playback.
AUDIO LANGUAGE
You can select the default audio language to be played if it is
contained on a DVD AUDIO/DVD VIDEO disc.
Setting options
ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN,
JAPANESE, language code from AA to ZU
• If the disc does not have the selected language, the disc’s
[4:3 PS] (Pan Scan conversion): select when you connect the
unit to a normal (4:3) TV.
When playing back a DVD VIDEO disc recorded in wide picture
format, the picture is zoomed to fill the screen vertically, and the
left and right sides of the image are chopped off.
Note, however, that the picture will be shown in the 4:3 LB
mode even if you select the 4:3 PS mode depending on the
disc.
default language will be used.
• For details about language codes, see “Appendix B: Table of
languages and their abbreviations” on page 50.
• You cannot change the setting during playback.
SUBTITLE
You can select the default subtitle language to be displayed if it is
contained on a DVD AUDIO/DVD VIDEO disc.
Setting options
OFF, ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN,
ITALIAN, JAPANESE, language code from AA to ZU
• If the disc does not have a subtitle in the selected language, the
disc’s default language will be used.
• For details about language codes, see “Appendix B: Table of
languages and their abbreviations” on page 50.
• You cannot change the setting during playback.
PICTURE SOURCE
This mode selects whether the content on the disc is processed
by field (video source) or by frame (film source). You can obtain
optimal picture quality according to the source type to be played
back by selecting an appropriate option. This setting is available
for both the interlaced mode and progressive scanning mode.
ON SCREEN LANGUAGE
You can select the on-screen display language of the unit.
Setting options
Setting options
ENGLISH, SPANISH, FRENCH
VIDEO(NORMAL), VIDEO(ACTIVE), FILM, AUTO
[VIDEO(NORMAL)]: select when playing back a video source
disc with relatively a few movements.
[VIDEO(ACTIVE)]: select when playing back a video source disc
with relatively a lot of movements.
• Some on-screen messages are shown in English regardless of
the setting.
• You cannot change the on-screen language shown on the MP3/
WMA display.
[FILM]: select when playing back a film source disc.
[AUTO]: select when playing back a disc containing both video
and film source materials.
The unit recognizes the picture type (film or video source) of the
current disc according to the disc information. Normally, select
this option.
PICTURE menu
MONITOR TYPE
You can select the monitor type to match your TV when you play
back DVD VIDEO discs recorded for wide-screen televisions.
SCREEN SAVER
You can set the screen saver function to ON or OFF. (See page
11.)
Setting options
16:9 NORMAL, 16:9 AUTO, 4:3 LB, 4:3 PS
[16:9 NORMAL] (Wide television screen): select when you
connect the unit to a wide-screen (16:9) TV whose aspect ratio
is fixed to 16:9 (the unit automatically adjusts the screen width
of the output signal correctly when playing back a 4:3 source).
If you play a 4:3 DVD VIDEO source using the [16:9 NORMAL]
mode, the picture character changes slightly due to the process
for converting the picture width.
Setting options
ON, OFF
[16:9 AUTO] (Wide television screen): select when you
connect the unit to a wide-screen (16:9) TV.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
MP3&WMA/JPEG
NOTE
The unit can play MP3/WMA and JPEG files recorded on a CD-
R/CD-RW disc. However, if a disc contains both MP3/WMA and
JPEG files, you can only play files of the type selected in this
menu item.
With some DVD AUDIO discs, the track is prohibited from down-
mixing to 2-channel stereo audio. With such discs, even if you
select [2-CH DOLBY SURROUND] or [2-CH STEREO], down-
mixing function does not work. In this case, [MULTI CH] appears
on the display window for about 2 to 3 seconds.
Setting options
MP3&WMA, JPEG
[MP3&WMA]: when selected, only MP3/WMA files can be played
back.
D. RANGE CONTROL
This setting provides optimal audio quality from the analog
AUDIO OUT terminals for listening to DVD VIDEO discs recorded
in Dolby Digital format, at low or middle volume.
[JPEG]: when selected, only JPEG files can be played back.
Setting options
AUDIO menu
WIDE RANGE, NORMAL, TV MODE
[WIDE RANGE]: when selected, audio is played back with the
widest dynamic range so that you can enjoy powerful playback
sound.
[NORMAL]: normally, select this option.
[TV MODE]: select if DVD VIDEO disc sound level is lower than
TV program sound level. Thus you can hear sound at a lower
volume clearly.
DIGITAL AUDIO OUTPUT
To connect the unit’s digital output to an external device equipped
with a digital input, this item must be set correctly.
See “Appendix C: Digital output signal chart” on page 50 for
details about the relation between the setting and output signals.
Setting options
PCM ONLY, DOLBY DIGITAL/PCM, STREAM/PCM
[PCM ONLY]: select when you connect the DIGITAL OUT jack of
the unit to the linear PCM digital input of other audio equipment.
[DOLBY DIGITAL/PCM]: select when you connect the digital
input of a Dolby Digital decoder or an amplifier with a built-in
Dolby Digital decoder.
When this option is selected, playing back a DTS-encoded disc
or disc recorded by the MPEG Multichannel format outputs a
linear PCM digital signal.
OUTPUT LEVEL
This setting allows you to attenuate the level of the signal output
from the unit’s analog AUDIO OUT jacks.
Setting options
STANDARD, LOW
• If the sound output from the speaker is distorted, select [LOW].
[STREAM/PCM]: select when you connect the digital input of an
amplifier with a built-in DTS, MPEG Multichannel or Dolby
Digital decoder, or the stand-alone unit of such a decoder.
SPK.SETTING menu
This menu can be selected only when [ANALOG OUT] in the
[AUDIO] preference display is set to [MULTI CHANNEL].
NOTE
MODE
When [STREAM/PCM] is selected, note the following points:
- With some DVD VIDEO discs that are not fully copy-protected,
a 20 or 24 bit digital signal may be output.
You can select the speaker configuration type according to your
speaker systems.
- A signal recorded with the 96 kHz or higher sampling
frequency is output from the DIGITAL OUT jack with the 48
kHz sampling frequency.
Setting options
5.1 CH., EXPERT
- When playing a DVD VIDEO or Audio CD disc with DTS, use
a DTS decoder to get correct signals from your speakers.
[5.1 CH.]: select when you connect the unit to a 5.1-channel
amplifier and use the front, surround, center and sub-woofer
speakers.
[EXPERT]: select when you want to make fine tuning to match
your speakers. The SIZE, DELAY, and LEVEL setting items are
available.
ANALOG OUT
To play back a DVD VIDEO disc recorded with surround
multichannel audio correctly, you must set this item properly
according to your audio system.
(This function does not work when the 3D PHONIC function is
activated.)
SIZE
You can set the speaker sizes according to your speakers.
See page 40 for how to set the speaker sizes.
Setting options
2-CH DOLBY SURROUND, 2-CH STEREO, MULTI CHANNEL
[2-CH DOLBY SURROUND]: select when you enjoy
multichannel surround audio by connecting the unit’s AUDIO
OUT jacks to a surround decoder.
DELAY
You can set the speaker delay time according to your speakers.
See page 41 for how to set the speaker delay time.
[2-CH STEREO]: select when you enjoy conventional 2-channel
stereo audio by connecting the unit’s AUDIO OUT jacks to a
stereo amplifier/receiver or TV, or when you duplicate audio of a
DVD VIDEO disc recorded with surround audio to your MD,
cassette, etc.
LEVEL
You can set the speaker output level according to your speakers.
See page 41 for how to set the speaker output level.
[MULTI CHANNEL]: select when you enjoy multichannel
surround audio by connecting the unit’s 5.1-channel audio
outputs to an amplifier equipped with 5.1-channel inputs.
NOTE
If you connect the unit’s digital output to an external Dolby Digital
or DTS decoder, and set [DIGITAL AUDIO OUTPUT] in the
[AUDIO] preference display to [STREAM/PCM], the above
settings are not effective.
Make the speaker settings of the external decoder properly.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
PARENTAL LOCK
OTHERS menu
When this option is selected, pressing ENTER on the remote
control unit brings up the PARENTAL LOCK display shown below.
This allows you to restrict children from playing DVD VIDEO
discs.
RESUME
You can select the resume playback mode.
See page 13 for details about the resume playback function.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
Setting options
NONE
_ _ _ _
ON, OFF, DISC RESUME
[ON]: when selected, the unit can resume playback of the disc
from the position where playback was last interrupted, if the
disc is still in the disc tray.
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
[OFF]: when selected, the resume function is deactivated.
[DISC RESUME]: when selected, the unit can resume playback
of the last 30 discs played. The unit retains a memory of the
interrupted positions of the last 30 discs played, even though
they have been removed from the disc tray.
• See page 42 for details about the parental lock setting.
ON SCREEN GUIDE
The unit can display “on-screen guide” icons or characters on the
picture, which show what is happening to the disc or the unit.
Example of “on-screen guide” icons:
,
,
Setting options
ON, OFF
[ON]: when selected, the on-screen guide is activated.
AUTO STANDBY
When the unit is stopped for more than 30 minutes or 60 minutes,
the unit enters standby mode automatically.
Setting options
60, 30, OFF
AV COMPULINK MODE
You must set this item correctly to use the AV COMPU LINK
system.
Setting options
DVD1, DVD2, DVD3
• See page 46 for details about the AV COMPU LINK function.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
6 Press 5/∞to select [BASS REDIRECT] and
press ENTER.
7 Press 5/∞to select [SUB WOOFER] or
[FRONT L/R] and press ENTER.
SUB WOOFER: The low-frequency signal fed from the
subwoofer output is boosted up.
FRONT L/R: The low-frequency signals fed from the front
speaker outputs are boosted up. No audio is output from
the subwoofer.
5/∞
ENTER
To return to the [SPK.SETTING] page
Press 5/∞to move
to [RETURN] and press ENTER.
NOTES
• The [BASS REDIRECT] setting is effective only when at least
any one of the speaker sizes is set to [SMALL].
• No audio is output from the SUBWOOFER jack when [FRONT
L/R] is selected.
• If the front speaker size is set to [SMALL], the [BASS
REDIRECT] setting is fixed to [SUBWOOFER].
• During playback of a DVD AUDIO, audio signal may not be
output correctly depending on the conditions of the unit or the
disc itself.
Making fine tuning for your speakers
You can make fine tuning to match your speaker system.
Preparation
Set [ANALOG OUT] in the [AUDIO] preference display to
[MULTI CHANNEL] and [MODE] in the [SPK.SETTING]
preference display to [EXPERT].
Setting the speaker sizes and the BASS
REDIRECT function
1 Bring up the SPK.SETTING menu.
2 Press 5/∞to move
to [SIZE] and press
ENTER.
The [SIZE] display page appears on the TV screen.
SIZE
FRONT SPEAKER
CENTER SPEAKER
SURROUND SPEAKER
BASS REDIRECT
RETURN
LARGE
SMALL
SMALL
SUB WOOFER
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
3 Press 5/∞to select the speaker to be set and
press ENTER.
FRONT SPEAKER:
CENTER SPEAKER:
front speakers
center speakers
SURROUND SPEAKER: surround speakers
4 Press 5/∞to select the size and press
ENTER.
LARGE: large speaker(s) which can fully reproduce the low-
frequency range.
SMALL: small speaker(s) which cannot fully reproduce the
low-frequency range.
NONE: no speaker(s) connected.
5 Repeat steps 3 and 4 if you want to set other
speakers.
When you use the small speakers which do not fully
reproduce the low-frequency range, you can boost up the
low-frequency signal of the subwoofer or front speakers by
setting the BASSS REDIRECT function.
To set the BASS REDIRECT function, go to step 6.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
As the distance from the center speaker and/or the surround
speakers to the listener is shorter than the distance from the front
speakers to the listener, select the longer distance value.
Setting the delay time
When playing in multi-channel mode and the speakers cannot all
be located an equal distandce from the listener, this setting can
compensate for the difference between the distance from the
front speakers (left, right) to the listener, and the distance from
the center speaker and the surround speakers to the listener.
Check the difference in the distance between the listener and the
front speakers (left, right), and the distance between the listener
and the other speakers, and then set that value as described in
the procedure below.
NOTE
This setting can only compensate for differences in speaker
distance when the front speakers (left, right) are farther from the
listener than the other speakers.
Setting the speaker level
You can adjust the output level of each speaker.
1 Bring up the SPK.SETTING menu.
1 Bring up the SPK.SETTING menu.
2 Press 5/∞to move
to [DELAY] and press
ENTER.
2 Press 5/∞to move
to [LEVEL] and press
The [DELAY] display page appears on the TV screen.
ENTER.
The [LEVEL] display page appears on the TV screen.
DELAY
CENTER SPEAKER
SURROUND SPEAKER
RETURN
0.0m/0ft
1.5m/5ft
LEVEL
FRONT SPEAKER
CENTER SPEAKER
SURROUND SPEAKER
SUB WOOFER
TEST TONE
0dB
0dB
0dB
0dB
OFF
SELECT
ENTER
RETURN
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
3 Press 5/∞to select the speaker to be set and
press ENTER.
3 Press 5/∞to select the speaker to be set and
CENTER SPEAKER: center speaker
SURROUND SPEAKER: surround speakers
press ENTER.
FRONT SPEAKER: front speakers (This item cannot be
selected. The level is fixed to 0 dB.)
CENTER SPEAKER: center speaker
SURROUND SPEAKER: surround speakers
SUB WOOFER: subwoofer
4 Press 5/∞to select the appropriate distance
and press ENTER.
When you select [CENTER SPEAKER], you can select the
appropriate distance from [0.0m] to [1.5m] in 30 cm (1 ft)
units.
When you select [SURROUND SPEAKER], you can select
the appropriate distance from [0.0m] to [4.5m] in 30 cm (1 ft)
units.
4 Press 5/∞to set the level and press ENTER.
The selectable level ranges from –6 to 6 dB in 1 dB unit.
5 Repeat steps 3 and 4 if you want to set other
speakers.
5 Repeat steps 3 and 4 if you want to set other
speakers.
To return to the [SPK.SETTING] page
Press 5/∞to move
to [RETURN] and press ENTER.
To return to the [SPK.SETTING] page
Press 5/∞to move
to [RETURN] and press ENTER.
NOTE
For the speaker(s) whose size is set to [NONE], the speaker level
cannot be set.
Hint
If there is no difference between the distance from the front
speakers to the listener, and the distance from the center speaker
and/or the surround speakers to the listener, select [0.0m].
If there is a difference between them, refer to the following
diagram to set the delay time correctly.
To generate test tone signals
You can check the level setting by monitoring the test tone.
Subwoofer
1 Press 5/∞to select [TEST TONE] and press
ENTER.
Center speaker
Front speaker
(L)
Front speaker
(R)
2 Press 5/∞to select [ON] and press ENTER.
The test tone will be generated when you select the
speaker(s) in the [LEVEL] page.
3.0m
2.7m
2.4m
2.1m
NOTE
The test tone sound is not output from the subwoofer.
Surround speaker (L)
Surround speaker (R)
In the above example, set [CENTER SPEAKER] to [0.3m], and
[SURROUND SPEAKER] to [0.9m].
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
4 Press 5/∞to select the country code.
Select the code of the country whose standards were used to
rate the DVD VIDEO disc content.
See “Appendix A: Country/Area code list for Parental Lock”
on page 49.
Numeric buttons
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
UG
UM
US
UY
UZ
VA
VC
NONE
_ _ _ _
5/∞
ENTER
SELECT
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
ENTER
5 Press ENTER.
moves to [SET LEVEL].
6 Press ENTER to bring up the pull-down
menu.
In the pull-down menu, [NONE] and levels [8] to [1] are
available.
[NONE] does not restrict playback. Level [1] is the strictest
level. Discs rated higher than the selected level are restricted.
Limiting playback by children
This function restricts playback of DVD VIDEO discs which
contain violent (and other) scenes according to the level set by
the user. For example, if a movie which includes violent scenes
supports the parental lock feature, such scenes which you do not
want to let children view can be cut or replaced with other
scenes.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
NONE
8
7
6
5
4
3
NONE
_ _ _ _
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
To set Parental Lock for the first time
7 Press 5/∞to select a desired parental lock
level, then press ENTER.
moves to [PASSWORD].
1 Bring up the OTHERS menu.
8 Press the numeric buttons (0 to 9) to enter a
4-digit password.
2 Press 5/∞to move
to select [PARENTAL
LOCK] then press ENTER.
The Parental Lock on-screen display appears on the TV
screen.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
NONE
1234
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
NONE
_ _ _ _
...
SELECT
NEW PASSWORD? PRESS 0 ~ 9 KEY
TO EXIT, PRESS CHOICE.
ENTER
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
9 Press ENTER.
The parental lock feature is set.
moves to [EXIT]. Pressing ENTER again returns to the
[OTHERS] menu of the preference display.
3 While
is pointing to [COUNTRY CODE],
press ENTER to bring up the pull-down
menu.
Hint
If you want to change the password at step 8, do it before
pressing ENTER.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
To change the settings
To temporarily release the Parental Lock
You can change the parental lock settings later.
If the parental level is set to a strict value, some discs may not
play at all.
When you insert such a disc and try to play it, the following
parental lock on-screen display appears on the TV screen, asking
you whether you want the parental lock to be temporarily
released or not.
1 Bring up the OTHERS menu.
2 Press 5/∞to move
to select [PARENTAL
LOCK] and press ENTER.
The parental lock on-screen display appears on the TV
screen.
1 Press 5/∞to move
to [TEMPORARY
RELEASE], then press ENTER.
3 While
is pointing to [PASSWORD], press
the numeric buttons to enter your current 4-
digit password then press ENTER.
PARENTAL LOCK
TEMPORARY RELEASE
NOT RELEASE
moves to [COUNTRY CODE] if you enter the correct
password.
PASSWORD
_ _ _ _
If you enter a wrong password, “WRONG! RETRY...” appears
on the TV screen, and you cannot go to the next step.
If you forget your password, enter “8888.” The current
password is deleted and you can set a new password.
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
4 To change the [COUNTRY CODE] or [SET
2 Press the numeric buttons (0 to 9) to enter
LEVEL], press ENTER to bring up the
your 4-digit password.
associated pull-down menu when
pointing to the desired item.
is
The Parental Lock is released, and the unit starts playback.
If you enter a wrong password, “WRONG! RETRY...” appears
on the TV screen. Enter the correct password.
5 Press 5/∞to select the desired option then
press ENTER.
NOTE
If you change the country code, you must reselect the
parental lock level.
When you enter the wrong password 3 times at step 2 above,
moves to [NOT RELEASE] automatically and 5/∞do not work.
6 While
is pointing to [PASSWORD], press
the numeric buttons to enter a 4-digit
password.
The password entered in this step becomes the new
password. If you want to keep the same password as before,
enter the same password.
7 Press ENTER.
moves to [EXIT]. Pressing ENTER again returns to the
[OTHERS] menu of the preference display.
NOTE
If you enter the wrong password more than 3 times in step 3
above,
moves to [EXIT] automatically and 5/∞do not work.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Names of parts and controls
Front panel
1
2
3
4
5
6
7
8
9
0
-
=
~
8 3button (11, 13)
9 8button (12, 14)
1
button (10)
2 STANDBY/ON indicator (10)
3 Disc tray (11)
0 Display window (see the illustration below)
- Remote sensor (8)
4 0button (11)
= PROGRESSIVE indicator (5)
~ DVD AUDIO indicator (2)
5 4button (14, 15)
6 ¢button (14, 15)
7 7button (12, 13)
Display window
1
2
3
4
5
6
7
8
9
1 Audio format indicators
2 Disc indicator
3 Group/title/track/chapter indicators
4 Repeat mode indicator
6 Total time/remaining time indicators
7 kHz (unit of sampling frequency) indicator
8 3(play) / 8(pause) indicators
9 Multi-information window
5 Program/random indicators
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Remote control unit
%
^
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
&
*
1
2
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
TV-/--
10
8
TV0
0
9
MUTING
+10
TITLE/
TV/VIDEO
CANCEL
3
4
5
RETURN
VOL
PAGE
GROUP
(
)
_
+
CH
+
VOL+
6
ENTER
7
8
9
¡
CH
PREVIOUS
NEXT
CLEAR
SELECT
0
-
=
£
¢
SLOW
-
SLOW+
VFP
3D
PHONIC
ZOOM
~
!
@
PROGRESSIVE
SCAN
ANGLE SUB TITLE AUDIO
fs/Rate
AMP
VOL
REPEAT
DIMMER
#
$
1 OPEN/CLOSE button (11)
2 Numeric buttons
% Infrared signal window (8)
^ TV - DVD switch (9, 10, 16, 27, 31, 33, 36)
3 PAGE button (17)
4 RETURN button (16)
5 TOP MENU button (16, 28)
6 Cursor selection (5Up, ∞Down) - CH (+/–) buttons
7 Cursor selection (2Left, 3Right) - VOL (+/–) buttons
8 CHOICE button (11, 36)
9 4/PREVIOUS button (14, 15, 27, 28, 29, 31, 33, 34)
0 7/CLEAR button (12, 19, 20, 28, 31, 33)
- 3/SELECT button (11, 13, 27, 28, 31, 34)
= 1/SLOW– button (14, 27, 29)
& TV STANDBY/ON
* DVD STANDBY/ON
( TV/VIDEO - CANCEL button (9, 18)
) TITLE/GROUP button (16, 32, 34)
_ MENU button (16, 28, 33, 34)
+ ENTER button
button (9)
button (10)
¡ ON SCREEN button (12, 17, 18, 19, 20, 24)
¢/NEXT button (14, 15, 27, 28, 29, 31, 33, 34)
£ 8button (12, 31)
¢ ¡/SLOW+ button (14, 27, 29)
~
button (14)
ZOOM button (22, 34)
! 3D PHONIC button (23)
@ ANGLE button (21)
# REPEAT button (20, 29, 32, 35)
$ SUBTITLE button (21, 30)
VFP - PROGRESSIVE SCAN button (5, 22, 23)
AUDIO - fs/Rate button (21, 23, 30, 32)
AMP VOL +/– buttons (9)
DIMMER button (11)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
AV COMPU LINK remote control
system
To AV COMPU LINK
(ll, EX or lll)
The JVC AV COMPU LINK system allows you to enjoy video or
audio with the simplest operation. If your video/audio unit (such
as a DVD unit, CD unit and VCR) and television or/and amplifier/
receiver support the JVC AV COMPU LINK system and are tied
with the JVC AV COMPU LINK cable(s), simply starting the unit
will automatically make all necessary settings on the television
and/or amplifier/receiver to allow you to enjoy the playback.
TV
To AV COMPU
LINK
Receiver
The unit
• If you connect the unit to a television and receiver via AV
COMPU LINK, set the unit’s AV COMPU LINK setting to DVD1.
IMPORTANT!
Connection and setup
When you make video connection between the unit and another
device (such as a receiver and TV) via the composite, S-video or
component jacks, as well as AV COMPU LINK connection, see
also the instruction manual of the other device.
Using an AV COMPU LINK cable, connect the AV COMPU LINK
terminals of each component to one another.
• The unit’s AV COMPU LINK setting is controlled using the
OTHERS menu in the preference display. See page 39.
• For information on the connection between a TV and a receiver,
refer to the receiver’s instructions.
Notes for connection
• If you connect the unit to a receiver via AV COMPU LINK in a
system including a Dolby Digital decoder, some functions may
not be performed automatically.
To AV COMPU LINK (ll, EX or lll)
• Connect the AUDIO OUT jacks of the unit to the audio input
jacks of a receiver indicating “DVD.” Otherwise, the system will
not work correctly.
TV
• There may be no description about connections to the unit in
the instruction manual of a television or VCR. However, a
television or VCR with AV COMPU LINK terminals indicating
“II,” “EX” or “III” can be connected to the unit.
The unit
• If you connect the unit to a television via AV COMPU LINK, set
the unit’s AV COMPU LINK setting as follows.
- When connecting to the VIDEO-1 input terminal of the
television: DVD2
- When connecting to the VIDEO-2 input terminal of the
television: DVD3
Operation
The JVC AV COMPU LINK system allows you to enjoy video and/
or audio by simply pressing Play on the source component (the
component which plays back the video or audio, such as a DVD
unit or VCR). You do not even have to switch on power on the TV
or receiver.
To AV COMPU LINK
(ll, EX or lll)
1 Turn on the main power of the television.
2 Insert a disc (or tape) into the source
TV
The unit
component.
To AV COMPU LINK
VCR
3 Press 3of the source component.
The following actions are performed automatically:
• Turning on the television power.
• Setting the source of the television to the external input
(VIDEO-1 or VIDEO-2).
• Turning on receiver power.
• Setting the source of the receiver to the component which has
started playback.
• If you connect the unit to a television and VCR via AV COMPU
LINK, set the VCR’s Remote Control Code and the unit’s AV
COMPU LINK setting as follows.
- When connecting to the VIDEO-1 input terminal of the
television:
The unit’s AV COMPU LINK setting: DVD2
VCR’s Remote Control Code: B
- When connecting to the VIDEO-2 input terminal of the
television:
The unit’s AV COMPU LINK setting: DVD3
VCR’s Remote Control Code: A
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Picture
Troubleshooting
Picture is noisy.
\ The unit is connected to a VCR directly and the copyguard
function is activated. Connect the unit so that the picture
signal flows directly to the TV.
Power
\ With some discs, the picture may be blurred when [PICTURE
SOURCE] is set to [FILM] or [AUTO]. Set [PICTURE
SOURCE] to [VIDEO (NORMAL)] or [VIDEO (ACTIVE)].
Power does not come on.
\ Power plug is not inserted securely. Plug in securely.
Picture is distorted when using COMPONENT VIDEO OUT or
S-VIDEO output jack(s).
Operation
\ Both the component connection and S-video connection are
“REGION CODE ERROR!” is shown on the TV screen.
\ Region code of the inserted disc does not match the unit.
Check the region code of the disc printed on the disc jacket.
made. Disconnect the unused one.
No picture is displayed on the TV screen or the screen is
blurred or divided into two parts.
Operation is not possible.
\ The unit is in the progressive scanning mode though it is
connected to a TV via the VIDEO or S-VIDEO jack. Set the
VIDEO SIGNAL SELECTOR on the rear panel to “480i,” or set
it to “REMOTE” and make the Progressive scanning mode
inactive by using the VFP - PROGRESSIVE SCAN button
(see page 5).
\ Microcomputer malfunction due to lightning or static electricity.
Turn off the power and unplug the power cord, then connect
the power cord again.
\ Moisture condensation caused by a sudden change of
temperature or humidity. Turn off the power, then turn it on a
few hours later.
\ The disc does not allow the operation, or an unplayable disc is
inserted. Check and replace the disc (see page 2).
Audio
[LOCK] is displayed on the display window and the disc tray
does not open.
\ When you press 0while pressing down 7on the unit in
standby mode, the tray lock function is activated. The disc tray
cannot be opened or closed in this status. To release this
status, press 0while pressing down 7on the unit in standby
mode.
DVD VIDEO disc playback sound level is lower than TV
broadcast sound level.
\ Set the [D.RANGE CONTROL] preference to [TV MODE] (see
page 38).
Analog audio output is distorted.
\ Set the [OUTPUT LEVEL] preference to [LOW] (see page 38).
TV cannot be operated with the remote control unit.
\ Set the manufacturer code correctly according to your TV (see
page 9).
\ Set the TV - DVD switch on the remote control unit to “TV.”
[MULTI CH] is shown in the display window when playing
back a DVD AUDIO disc.
\ The track is prohibited from down-mixing to 2-channel stereo
audio. Listen in multichannel surround audio (see page 38).
Setting cannot be changed in the [LANGUAGE] preference
display.
MP3/WMA
\ Stop playback and change the setting in the [LANGUAGE]
preference display.
No sound comes out.
\ MP3/WMA disc is recorded with the “packet writing (UDF
The audio language and subtitle cannot be changed.
\ Only one language is recorded on the disc currently being
played back.
\ The disc being played back does not accept the AUDIO - fs/
Rate button and SUBTITLE button operation. Change the
subtitle using [SUBTITLE] in the [LANGUAGE] preference
display (see page 37).
format).” It cannot be played.
Files (tracks) are not played in the recorded order.
\ This unit plays the files in the alphabetic order. So, the
playback order can vary.
WMA files cannot be played back.
\ The file is copy protected.
\ The file is recorded with a bit rate under 48 kbps. The unit
does not support such WMA files.
No subtitle is diplayed.
\ No subtitle is recorded on the disc currently being played
back.
\ [OFF] is selected in [SUBTITLE] in the [LANGUAGE]
preference display. Select the desired language in
[SUBTITLE] (see page 37).
JPEG
\ Subtitle may not be displayed correctly during A-B repeat
playbacik.
No picture is played back, or the screen turns black.
\ Format of the files is not the baseline JPEG. The unit supports
only the baseline JPEG format.
The preference display cannot be turned on.
\ You cannot turn on the preference display when a JPEG disc
is inserted.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
* Notes for PX model (Check the specification
indication on the rear panel.)
Specifications
Specifications and appearance are subject to change without
prior notice.
Power requirements
AC 110 V to 240 V
, 50 Hz/60
Hz
Power consumption
16 W (POWER ON), 2.0 W
(STANDBY mode)
General
Readable discs
DVD AUDIO, DVD VIDEO, DVD-R (Video
format), DVD-RW (Video format/VR format),
DVD-RAM (VR format), SVCD, Video CD,
Audio CD (CD-DA), MP3/WMA format,
JPEG, CD-R/RW (CD-DA, SVCD, Video CD,
MP3/WMA format, JPEG)
• Manufactured under license from Dolby Laboratories. “Dolby,”
“MLP Lossless” and the double-D symbol are trademarks of
Dolby Laboratories.
• “DTS” and “DTS Digital Surround” are registered trademarks of
Digital Theater Systems, Inc.
Video format
REMOTE, 480i (Interlaced scan)/480p
(Progressive scan) selectable
Other
Power requirements
AC 120 V
, 60 Hz
Power consumption
16 W (POWER ON), 2.0 W (STANDBY
mode)
Mass
2.1 kg (4.7 lbs)
Dimensions (W × H × D)
435 mm × 45 mm × 270.5 mm
(17-3/16 inch × 2-13/16 inch × 10-11/16 inch)
Video outputs
COMPONENT (pin jacks)
Y Output: 1.0 Vp-p (75 Ω)
PB/PR Output: 0.7 Vp-p (75 Ω)
VIDEO OUT (pin jack)
1.0 Vp-p (75 Ω)
S-VIDEO OUT (S jack)
Y Output: 1.0 Vp-p (75 Ω)
C Output: 286 mVp-p (75 Ω)
Horizontal resolution
500 lines or more
Audio outputs
ANALOG OUT (pin jack)
2.0 Vrms (10 kΩ)
DIGITAL OUT (COAXIAL)
0.5 Vp-p (75 Ω termination)
DIGITAL OUT (OPTICAL)
–21 dBm to –15 dBm (peak)
Audio characteristics
Frequency response
CD (sampling frequency 44.1 kHz):
2 Hz to 20 kHz
DVD (sampling frequency 48 kHz):
2 Hz to 22 kHz
(4 Hz to 20 kHz for DTS and Dolby
Digital bitstream signals)
DVD (sampling frequency 96 kHz):
2 Hz to 44 kHz
DVD (sampling frequency 192 kHz/176.4
kHz):
2 Hz to 88 kHz
Dynamic range
Wow and flutter
16 bit: More than 98 dB
20/24 bit: More than 100 dB
Unmeasurable (less than 0.002%)
Total harmonic distortion
less than 0.006%
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
(for page 42)
Appendix A: Country/Area code list for Parental Lock
AD Andorra
ES Spain
LI
Liechtenstein
SE Sweden
ET Ethiopia
LK Sri Lanka
LR Liberia
SG Singapore
SH Saint Helena
AE United Arab Emirates
AF Afghanistan
FI
Finland
FJ Fiji
LS Lesotho
SI
Slovenia
AG Antigua and Barbuda
FK Falkland Islands
LT
Lithuania
SJ Svalbard and Jan Mayen
SK Slovakia
AI
Anguilla
FM Micronesia (Federated
States of)
LU Luxembourg
LV Latvia
AL Albania
SL Sierra Leone
SM San Marino
AM Armenia
FO Faroe Islands
FR France
LY
Libyan Arab Jamahiriya
AN Netherlands Antilles
AO Angola
MA Morocco
MC Monaco
SN Senegal
FX France, Metropolitan
GA Gabon
SO Somalia
AQ Antarctica
AR Argentina
AS American Samoa
AT Austria
MD Moldova, Republic of
MG Madagascar
MH Marshall Islands
ML Mali
SR Suriname
GB United Kingdom
GD Grenada
ST Sao Tome and Principe
SV El Salvador
GE Georgia
SY Syrian Arab Republic
SZ Swaziland
AU Australia
GF French Guiana
GH Ghana
MM Myanmar
MN Mongolia
MO Macau
AW Aruba
TC Turks and Caicos Islands
TD Chad
AZ Azerbaijan
BA Bosnia and Herzegovina
BB Barbados
BD Bangladesh
BE Belgium
GI
Gibraltar
GL Greenland
GM Gambia
MP Northern Mariana Islands
MQ Martinique
MR Mauritania
MS Montserrat
MT Malta
TF French Southern
Territories
GN Guinea
TG Togo
GP Guadeloupe
GQ Equatorial Guinea
GR Greece
TH Thailand
TJ Tajikistan
TK Tokelau
BF Burkina Faso
BG Bulgaria
MU Mauritius
MV Maldives
MW Malawi
BH Bahrain
GS South Georgia and the
South Sandwich
TM Turkmenistan
TN Tunisia
BI
Burundi
BJ Benin
GT Guatemala
GU Guam
TO Tonga
MX Mexico
BM Bermuda
TP East Timor
TR Turkey
MY Malaysia
MZ Mozambique
NA Namibia
BN Brunei Darussalam
BO Bolivia
GW Guinea-Bissau
GY Guyana
TT Trinidad and Tobago
TV Tuvalu
BR Brazil
HK Hong Kong
NC New Caledonia
NE Niger
BS Bahamas
BT Bhutan
HM Heard Island and
McDonald Islands
TW Taiwan
TZ Tanzania, United Republic
of
NF Norfolk Island
NG Nigeria
BV Bouvet Island
BW Botswana
BY Belarus
HN Honduras
HR Croatia
HT Haiti
UA Ukraine
UG Uganda
NI
Nicaragua
NL Netherlands
NO Norway
BZ Belize
HU Hungary
UM United States Minor
Outlying Islands
CA Canada
ID
IE
IL
Indonesia
Ireland
Israel
NP Nepal
CC Cocos (Keeling) Islands
CF Central African Republic
CG Congo
US United States
UY Uruguay
NR Nauru
NU Niue
IN
IO
India
UZ Uzbekistan
NZ New Zealand
OM Oman
CH Switzerland
British Indian Ocean
Territory
VA Vatican City State (Holy
See)
CI
Côte d’Ivoire
IQ
IR
IS
IT
Iraq
VC Saint Vincent and the
Grenadines
PA Panama
CK Cook Islands
CL Chile
Iran (Islamic Republic of)
PE Peru
VE Venezuela
Iceland
Italy
PF French Polynesia
PG Papua New Guinea
PH Philippines
PK Pakistan
CM Cameroon
CN China
VG Virgin Islands (British)
VI
Virgin Islands (U.S.)
JM Jamaica
JO Jordan
CO Colombia
CR Costa Rica
CU Cuba
VN Vietnam
VU Vanuatu
JP Japan
PL Poland
WF Wallis and Futuna Islands
WS Samoa
KE Kenya
PM Saint Pierre and Miquelon
PN Pitcairn
CV Cape Verde
CX Christmas Island
CY Cyprus
KG Kyrgyzstan
KH Cambodia
YE Yemen
PR Puerto Rico
PT Portugal
YT Mayotte
KI
Kiribati
CZ Czech Republic
DE Germany
DJ Djibouti
YU Yugoslavia
ZA South Africa
ZM Zambia
KM Comoros
PW Palau
KN Saint Kitts and Nevis
PY Paraguay
QA Qatar
KP Korea, Democratic
People's Republic of
DK Denmark
DM Dominica
DO Dominican Republic
DZ Algeria
ZR Zaire
RE Réunion
KR Korea, Republic of
KW Kuwait
ZW Zimbabwe
RO Romania
RU Russian Federation
RW Rwanda
KY Cayman Islands
KZ Kazakhstan
EC Ecuador
SA Saudi Arabia
SB Solomon Islands
SC Seychelles
SD Sudan
EE Estonia
LA Lao People's Democratic
Republic
EG Egypt
EH Western Sahara
ER Eritrea
LB Lebanon
LC Saint Lucia
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
(for pages 21 and 37 )
Appendix B: Table of languages and their abbreviations
AA
AB
AF
Afar
FA
Persian
Finnish
Fiji
KM Cambodian
OM (Afan) Oromo
SU Sundanese
SV Swedish
SW Swahili
Abkhazian
Afrikaans
FI
KN Kannada
OR Oriya
FJ
KO Korean (KOR)
PA
PL
PS
PT
Panjabi
AM Ameharic
AR Arabic
FO Faroese
FY Frisian
KS
Kashmiri
Polish
TA
Tamil
KU Kurdish
Pashto, Pushto
Portuguese
TE
Telugu
AS
AY
AZ
BA
BE
Assamese
Aymara
GA Irish
KY
LA
LN
LO
LT
Kirghiz
TG Tajik
GD Scots Gaelic
Latin
QU Quechua
TH
TI
Thai
Azerbaijani
Bashkir
GL
Galician
Lingala
RM Rhaeto-Romance
RN Kirundi
Tigrinya
Turkmen
Tagalog
Setswana
GN Guarani
GU Gujarati
HA Hausa
Laothian
Lithuanian
Latvian, Lettish
TK
TL
TN
Byelorussian
RO Rumanian
RU Russian
BG Bulgarian
BH Bihari
LV
HI
Hindi
MG Malagasy
MI Maori
RW Kinyarwanda
TO Tongan
BI
Bislama
HR Croatian
HU Hungarian
HY Armenian
SA
Sanskrit
TR
TS
TT
Turkish
Tsonga
Tatar
BN Bengali, Bangla
BO Tibetan
BR Breton
MK Macedonian
ML Malayalam
MN Mongolian
MO Moldavian
MR Marathi
SD Sindhi
SG Sangho
IA
IE
IK
IN
IS
IW
JI
Interlingua
Interlingue
Inupiak
SH Serbo-Croatian
TW Twi
CA Catalan
CO Corsican
CS Czech
SI
Singhalese
Slovak
UK Ukrainian
UR Urdu
SK
SL
Indonesian
Icelandic
Hebrew
MS Malay (MAY)
MT Maltese
Slovenian
UZ
VI
Uzbek
CY Welsh
SM Samoan
SN Shona
SO Somali
SQ Albanian
SR Serbian
Vietnamese
DA Danish
MY Burmese
NA Nauru
VO Volapuk
WO Wolof
XH Xhosa
YO Yoruba
DZ
EL
Bhutani
Greek
Yiddish
JW Javanese
NE Nepali
EO Esperanto
ET Estonian
EU Basque
KA
KK
KL
Georgian
Kazakh
NL
Dutch
NO Norwegian
OC Occitan
SS
ST
Siswati
ZU
Zulu
Greenlandic
Sesotho
(for page 38)
Appendix C: Digital output signal chart
Output
Disc type
PCM ONLY
DOLBY DIGITAL/PCM
STREAM/PCM
DVD with 48/44.1 kHz, 16/20/24 bit
linear PCM
48/44.1 kHz, 16/20/24 bit, stereo linear PCM
DVD AUDIO with MLP
DVD with 192/176.4/96/88.2 kHz,
16/22/24 bit linear PCM
DVD AUDIO with MLP
48/44.1 kHz, 16/20/24 bit, stereo linear PCM (Down sampling)
48 kHz, 16 bit, stereo linear PCM
DVD with DTS
DTS bitstream
DTS bitstream
DVD with Dolby Digital
SVCD/Video CD/Audio CD
Audio CD with DTS
48 kHz, 16 bit, stereo linear PCM
Dolby Digital bitstream
44.1 kHz, 16 bit, stereo linear PCM
44.1kHz, 16 bit, stereo linear PCM
CD-R/RW with MP3/WMA
Linear PCM
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Appendix D: Glossary
480i/480p
Interlaced scanning
Indicates the number of scanning lines and scanning format of an
image signal. 480i indicates 480 scanning lines with interlace
format, and 480p indicates 480 scanning lines with progressive
format.
In a conventional video system, a picture is shown on the display
monitor in between lines of two halves. The Interlaced scanning
system places lines of the second half of the picture in-between
lines of the first half of the picture.
JPEG
Aspect ratio
A popular file format for still image compression and storage.
JPEG stands for Joint Photographic Experts Group.
There are three sub-types of the JPEG format as follows.
• baseline JPEG: used for digital cameras, the web, etc.
• progressive JPEG: used for the web
A ratio which defines the shape of the rectangular picture in a TV.
It is the width of the picture relative to the height. A conventional
TV picture is 4:3 in aspect ratio.
Bit rate
• lossless JPEG: an old type, rarely used now
Shows the number of digital information needed to play back
sound for 1 second. The bit rate is expressed in bits per second.
Linear PCM audio
PCM stands for “pulse code modulation.” Linear PCM is the usual
method for digitally encoding audio without compression, and is
used for the audio tracks on DVD VIDEO discs, Audio CDs, etc.
Bitstream
The digital form of multichannel audio data (e.g., 5.1-channel)
before it is decoded into its various channels.
MLP
Chapter/title
MLP stands for “Meridian Lossless Packing.” A lossless audio
compression system that can completely recreate the PCM
signal.
Chapter is the smallest division and title is the largest division on
DVD VIDEO. A chapter is a division of a title and similar to a track
for Video CD or Audio CD.
MP3
Component video
MP3 is an audio data compression format, which stands for
MPEG-1 Audio Layer 3. Using MP3, you can achieve a data
reduction of about 1:10.
Video signals with three channels of separate information that
makes up the picture. There are some types of component video,
such as R/G/B and Y/CB(PB)/CR(PR).
NTSC (National television system committee)
A black and white and color television system format used in the
U.S.A., Canada, Mexico and Japan.
Composite video
A single video signal commonly used in most consumer video
products that contains all luminance, color, and synchronization
information.
PAL (Phase Alternation by Line)
A color television system format used extensively in Western
Europe.
Dolby Digital (AC3)
A six-channel system consisting of left, center, right, left rear,
right rear and LFE (Low-Frequency Effect channel, for use with a
sub-woofer) channels. All processing is done in the digital
domain. Not all Dolby Digital discs contain six (5.1) channels of
information.
PBC
PBC stands for “Playback control” and is a method of controlling
disc play for Video CDs (VCD). You are able to interact with the
disc through menus.
Progressive scanning
Dolby Surround/Dolby Pro Logic
Progressive scanning displays all the horizontal lines of a picture
at one time, as a single frame. A progressive scanning DVD unit
converts the interlaced (480i) video from DVD into progressive
(480p) format for connection to a progressive display. It
dramatically increases the vertical resolution.
Dolby Surround records four channels of front and rear audio in
two channels in a way that allows a decoder to recover the
original four channels for playback. Because the audio is
recorded in two channels, it can be played back naturally by a
two-channel stereo system.
Dolby Pro Logic introduces directional circuits in decoder-side
processing (increasing the level of specific channels and lowering
the level of silent channels) for greater spatial perspective, and
adds a center speaker used primarily for dialog. The result is
enhanced channel separation.
Sampling frequency
The rate at which measurements of an audio signal are taken
during A/D and D/A conversion. The sampling frequency is
expressed in samples per second.
S-video
Down-mix
A video signal which improves picture quality over standard
composite connections. Used on Super VHS, DVD, high end TV
monitors, etc.
Internal stereo mix of multichannel surround audio by a DVD unit.
The down-mix signals are output from stereo output connectors.
DTS
Track
A Digital Surround audio encoding format configured with six
(5.1) channels, similar to Dolby Digital. It requires a decoder,
either in the unit or in an external receiver. DTS stands for Digital
Theater Systems.
The smallest division on SVCD, Video CD and Audio CD discs.
VR mode
A recording mode which is applied when video signals are
recorded onto a DVD-RW or DVD-RAM disc. This mode allows to
edit recording; for example, the VR mode enables a programmed
recording and a manual recording in which recording time can be
adjusted.
Not all DTS discs contain six (5.1) channels of information.
Dynamic range
The difference between the loudest and softest sounds.
WMA
Group
WMA is an abbreviation of “Windows Media Audio,” and is an
audio data compression format developed by Microsoft
Corporation. Sound quality of data compressed using WMA is
the same as that of MP3, though the WMA file size is smaller
than that of MP3.
The largest division on DVD AUDIO.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
CONSUMER VIDEO 1-90
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE
ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date
of original retail purchase for the period as shown below. ("The Warranty Period")
PARTS
LABOR
1 YR
90 DAYS
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND
IN COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO:
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.
Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service
centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts
thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen
size 25 inches and above which are covered on an in-home basis.
WHAT YOU MUST DO FOR WARRANTY SERVICE:
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized
service center, please call toll free: (800) 537-5722.
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with
a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the
name and location of which will be given to you by the toll-free number.
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.
WHAT IS NOT COVERED:
This limited warranty provided by JVC does not cover:
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by
JVC to render such service, or if affixed to any attachment not provided with the products, or if the model number
or serial number has been altered, tampered with, defaced or removed;
2. Initial installation and installation and removal for repair;
3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning;
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;
5. Signal reception problems and failures due to line power surge;
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase;
7. Accessories;
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);
There are no express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE
TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT-
ABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an
implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state.
JVC COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road
Wayne, NJ 07470
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF
REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION
PACKAGED WITH EACH REFURBISHED PRODUCT.
For customer use:
Enter below the Model No. which is located either on the rear, bottom or side of the cabinet. Retain this information
for future reference.
Model No. :
Serial No. :
Purchase data :
Name of dealer :
Download from Www.Somanuals.com. All Manuals Search And Download.
Authorized Service Centers
®
QUALITY
SERVICE
HOW TO LOCATE YOUR JVC SERVICE CENTER
TOLL FREE: 1 (800) 537-5722
Dear Customer,
In order to receive the most satisfaction from your purchase,please read the instruction booklet before
operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest
authorized servicer or visit our website at www.JVC.com
Remember to retain your Bill of Sale for Warranty Service.
Do not service the television yourself
Caution
To prevent electrical shock,do not open the cabinet.There are no user serviceable
parts inside.Please refer to qualified service personnel for repairs.
Accessories
To purchase accessories for your JVC product,please call toll free:1 (800)882-2345 or
on the web at www.JVC.com
BT-51005-5
(0301)
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
J
V
C
0703KTYBICJSC
EN.
© 2003 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
|