'9'ꢀ9,'(2ꢀ3/$<(5
Introduction
2
;9ꢁ6ꢂꢃ%.ꢄ;9ꢁ6ꢂꢅ*'ꢄ;9ꢁ(ꢆꢃꢃ6/
;9ꢁ6ꢈꢃ%.
Preliminary knowledge
Getting started
5
13
17
20
35
42
Basic operations
Advanced operations
Initial settings
OPEN
STANDBY/ON
/CLOSE
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
4
2
5
8
0
3
6
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
3
DVD/CD PLAYER
5
ENTER
∞
STANDBY
OPEN/CLOSE
0
DVD/VIDEO CD/CD
STANDBY ON
STOP
PLAY
PAUSE
4
SKIP
¢
DOLBY
7
3
8
D
I
G
I
T
A
L
RM-SXVB40A REMOTE CONTROL
Additional information
&H[HSWꢀ;9ꢈ6ꢊꢄ%..
127(ꢇ
,16758&7,216
7KHꢀ;9ꢁ6ꢂꢃ%.ꢀGRHVꢀQRWꢀLQꢄOXGHꢀ
DQ\ꢀDXGLRꢀDQGꢀYLGHRꢀꢄDEOHVꢅ
)RUꢀ&XVWRPHUꢀ8VHꢇ
(QWHUꢀEHORZꢀWKHꢀ0RGHOꢀ1RꢁꢀDQGꢀ6HULDOꢀ1Rꢁꢀ
ZKLꢂKꢀDUHꢀORꢂDWHGꢀRQꢀWKHꢀUHDUꢃꢀERWWRPꢀRUꢀ
VLGHꢀRIꢀWKHꢀꢂDELQHWꢁꢀ5HWDLQꢀWKLVꢀLQIRUPDWLRQꢀ
IRUꢀIXWXUHꢀUHIHUHQꢂHꢁ
0RGHOꢀ1Rꢁꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
6HULDOꢀ1Rꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
/(7ꢄꢅꢆꢇꢈꢄꢄꢉ&
>-@
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction
Preliminary knowledge
Getting started
Initial settings
Basic operations
Additional information
Advanced operations
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Features
Supplied accessories
Picture functions
OPEN
/CLOSE
PLAY
MODE
PHONIC
3D
1
2
3
STANDBY/ON
CANCEL
4
7
RETURN
10
5
+
6
ANGLE
8
9
DIGEST
PREVIOUS
SUB TITLE
0
AUDIO
4
CLEAR
10
THEATER
POSITION
7
SLOW
SELECT
ZOOM
1
3
NEXT
TITLE
¢
STROBE
SLOW
8
5
¡
CHOICE
5
+
ENTER
MENU
∞
5
RM-SXVB40A
DISPLAY
REMOTE CONTROL
Audio functions
Other functions
Download from Www.Somanuals.com. All Manuals Search And Download.
About this instruction manual
To playback in random order
[RANDOM]
You can play titles or tracks on discs inserted in random
order by using the Random function.
These symbols
indicate the types
of discs which the
operation can be
used for.
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
1
4
2
5
8
0
3
6
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
3
3
5
ENTER
∞
The number
indicates the
2
RM-SXVB40A REMOTE CONTROL
following procedural
step(s) in which the
button(s) is(are)
used.
You may also use the
corresponding
buttons on the front
panel of the unit if
available.
7 While stopped
1 Press PLAY MODE.
The play mode menu appears on the TV screen.
The number
indicates the
procedural step.
2 Use CURSOR 2/3 to move
to
[RANDOM].
REPEAT
PROGRAM
RANDOM
The names of buttons
on the remote control
unit (or on the front
panel of the unit) are
all given in uppercase
letters.
3 Press ENTER.
The unit starts random playback.
The “RANDOM” indicator appears in the display
window on the front panel. After playing all titles/
tracks of the discs, random playback ends.
Other convenient
procedures, etc.
•
The same title or track will not be played back more than
once during random play.
•
To stop/quit random playback in the middle
Press 7 to stop playback. The unit is still in random
playback mode, so pressing 3 starts random playback
again.
To quit random playback, press 7 again while stopped.
The “RANDOM” indicator in the display window turns
off.
NOTE
Some DVD VIDEO discs may not be played back
correctly in the random mode.
Additional
supplemental
remarks
•
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on handling
Important cautions
Safety precautions
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
Names of parts and controls
Refer to the corresponding pages indicated in () for details.
Front panel
1 STANDBY indicator 3 Remote sensor
5 0 (OPEN/CLOSE) button
2 STANDBY/ON
4 Disc tray
button
DVD/CD PLAYER
STANDBY
OPEN/CLOSE
0
DVD
/
VIDEO CD CD
/
STANDBY ON
STOP
PLAY
PAUSE
4
SKIP ¢
DOLBY
7
3
8
D
I
G
I
T
A
L
6 Display window
0 8 (PAUSE) button
9 3 (PLAY) button
8 7 (STOP) button
7 4/¢ (SKIP) buttons
1 STANDBY indicator
7 4/¢ (SKIP) buttons (18)
Lights when the power cord is connected and the unit is
on standby. When the unit is turned on, the STANDBY
indicator goes off.
Used to skip a chapter, title or track. Also, used for the
page selection of a menu screen (for Video CD).
Holding down 4 or ¢ during playback reverses or
advances playback rapidly.
2 STANDBY/ON
button (17)
8 7 (STOP) button (18)
Turns the unit on or off (standby).
Stops blayback. Also used to change the video output
setting (See page 14).
3 Remote sensor
Receives signals from the remote control unit.
9 3 (PLAY) button (18)
4 Disc tray (17)
Starts playback. Also, used as a SELECT button for
PBC of Video CDs.
Used to load a disc.
5 0 (OPEN/CLOSE) button (17)
0 8 (PAUSE) button (18)
Used to open and close the disc tray.
Pauses playback. Also, used to display
nine continuous still pictures (STROBE function).
6 Display window (8)
Indicates the current status of the unit.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
Remote control unit
! Infrated signal-emitting
window
@ STANDBY/ON
button
1 OPEN/CLOSE button
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
# RETURN button
$ CANCEL button
2 PLAY MODE button
3 3D PHONIC button
1
4
2
5
8
0
3
6
4 Numeric buttons
9
7
% THEATER POSITION
+
10
10
button
THEATER
5 ANGLE button
POSITION
ANGLE SUBTITLE AUDIO
6 SUBTITLE button
^ AUDIO button
& ZOOM button
DIGEST
ZOOM
7 DIGEST button
* ¢/NEXT button
( 8/STROBE button
) 3/SELECT button
8 4/PREVIOUS button
SELECT
3
9 7/CLEAR button
0 1/SLOW– button
_ ¡/SLOW+ button
+ MENU button
- TITLE button
5
ENTER
∞
¡ ENTER button
= 5 UP, ∞ DOWN,2 LEFT,
3 RIGHT (CURSOR)buttons
~ CHOICE button
™ DISPLAY button
RM-SXVB40A REMOTE CONTROL
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
1 OPEN/CLOSE button (17)
! Infrared signal-emitting window
Opens and closes the disc tray.
Point this window toward the remote sensor on the front
panel when pressing buttons.
2 PLAY MODE button (22, 26, 27, 28)
Displays an on-screen display for controlling the
advanced playback functions.
@ STANDBY/ON
button (17)
Turns the unit on or off (standby).
3 3D PHONIC button (32)
# RETURN button (20)
Produces a simulated surround effect.
Returns to the previous menu (for DVD VIDEO/Video CD).
4 Numeric buttons (11)
$ CANCEL button (26)
Used to select a title or track number, as well as used to
enter a time for the Time search and a chapter number for
the Chapter search.
Cancels the last programmed selection in the Program
mode.
% THEATER POSITION button (32)
Selects a picture character from 4 options (for DVD
VIDEO/Video CD).
5 ANGLE button (29, 30)
Changes camera angles during playback of a DVD VIDEO
disc containing multiple camera angles (for DVD VIDEO).
^ AUDIO button (31)
6 SUBTITLE button (30)
Selects the audio (for DVD VIDEO/Video CD).
Used to display the subtitle selection display on the TV
screen, as well as used to turn the subtitle on or off (for
DVD VIDEO).
& ZOOM button (25)
Zooms in the picture (for DVD VIDEO/Video CD).
* ¢/NEXT button (18, 19, 21)
Skips forward a chapter, title or track. Also used for the
page selection of a menu screen (for DVD VIDEO/Video
CD).
7 DIGEST button (23)
Displays beginning scenes of each title, chapter or track
on the TV screen (for DVD VIDEO/Video CD).
8 4/PREVIOUS button (18, 19, 21)
Holding down this button during playback advances
playback rapidly.
Skips back a chapter, title or track. Also used for the page
selection of a menu screen (for DVD VIDEO/Video CD).
Holding down this button during playback reverses
playback rapidly.
( 8/STROBE button (18, 24)
Pauses playback. Also, used to display nine continuous
still pictures (STROBE function).
9 7/CLEAR button (18, 26)
) 3/SELECT button (18, 20)
Starts playback. Also used as a SELECT button for PBC of
Video CDs.
Stops playback. Also used to erase all the programmed
tracks for the program play.
0 1/SLOW– button (18, 25)
_ ¡/SLOW+ button (18, 25)
Pressing this button during playback reverses playback
rapidly.
Pressing this button while a DVD VIDEO disc is paused
reverses playback slowly.
Pressing this button during playback advances playback
rapidly.
Pressing this button while a DVD VIDEO or Video CD disc
is paused advances playback slowly.
- TITLE button (20)
+ MENU button (20)
Displays the title menu of a DVD VIDEO disc on the TV
screen.
Displays a DVD menu on the TV screen.
¡ ENTER button
= 5 UP, ∞ DOWN, 2 LEFT, 3 RIGHT (CURSOR) buttons
Used to select an item form a menu or on-screen display,
or to change the setting of an item in the on-screen
display.
Executes the selected item in a menu or on-screen
display.
DISPLAY button (34)
Displays the status information (only for DVD disc) or the
time information (for any types of discs).
In this manual, we sometimes call them “CURSOR”
buttons.
~ CHOICE button (35)
Displays the preference on-screen display on the TV
screen.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
Display window
1 Disc indicator
3 Repeat mode indicators
2 Title/chapter/
track indicators
-
TITLE TRACK CHAP
1
A B
VCDVD
PROGRAM
RANDOM
5 Multi-information window
4 PROGRAM/RANDAM indicators
1 Disc indicator
4 PROGRAM/RANDOM indicators
Indicates the type of the disc set in the selected tray.
When setting a DVD VIDEO, Video CD or Audio CD disc is
set, “DVD”, “VCD” or “CD” illuminates, respectively.
The appropriate indicator illuminates while the unit is in
the Program or Random playback mode.
5 Multi-information window
Displays the current title/track/chapter number(s), time
2 Title/chapter/track indicators
Displays title/chapter, or track number.
and status information.
3 Repeat mode indicators
The appropriate indicator illuminates according to the
current repeat mode.
Rear panel
1 DIGITAL OUT jack(s) (OPTICAL/COAXIAL)
2 COMPONENT VIDEO OUT jacks (Y/PB/PR)
: except XV-S30BK
DIGITAL OUT
PCM / STREAM
VIDEO OUT
COMPONENT
1
AC IN
AV COMPU LINK
Y
PB
PR
COAXIAL
OPTICAL
RIGHT LEFT
AUDIO OUT
S-VIDEO VIDEO
3 S-VIDEO OUT jack
6 AV COMPU LINK jacks
5 AUDIO OUT jacks (LEFT/RIGHT)
4 VIDEO OUT jack
7
AC IN connector
1 DIGITAL OUT jack(s) (OPTICAL/COAXIAL) (15)
Outputs digital audio signals. You must select the signal
type correctly according to the external device connected
to via the Preference display. The XV-S40BK/XV-S45GD/
XV-E100SL provides both the OPTICAL and COAXIAL
connectors, while XV-S30BK provides only the COAXIAL
connector.
4 VIDEO OUT jack (13)
Outputs a composite video signal.
5 AUDIO OUT jacks (LEFT/RIGHT) (13,14)
Outputs stereo analog audio signals.
6 AV COMPU LINK jacks (42) (except XV-S30BK)
Connects with other JVC equipment supporting the AV
Compulink function to facilitate integrated operations.
2 COMPONENT VIDEO OUT jacks (Y/PB/PR) (14)
Output component video signals.
7
AC IN connector (16)
Connects to the wall outlet using the suppplied AC power
These jacks are not active in the initial (factory preset)
condition. See page 14 for details about how to make
them active.
cord.
3 S-VIDEO OUT jack (13)
Outputs an S-video signal.
Note that this jack is not active when you make the
COMPONENT VIDEO OUT jacks active. See pages 13 and
14 for details about how to make them active.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Operational Principles
On-screen displays
Opening displays
Opening display
NOW READING
LANGUAGE
AUDIO
Preference displays
AUDIO
DISPLAY
SYSTEM
AUDIO
DISPLAY
SYSTEM
LANGUAGE
LANGUAGE
ENGLISH
STREAM / PCM
MENU LANGUAGE
DIGITAL AUDIO OUTPUT
DOWN MIX
ENGLISH
ENGLISH
ENGLISH
Lo / Ro
ON
AUDIO LANGUAGE
SUBTITLE
COMPRESSION
ON SCREEN LANGUAGE
EXIT
EXIT
PRESS
KEY
PRESS
KEY
DISPLAY
SYSTEM
AUDIO
DISPLAY
SYSTEM
AUDIO
DISPLAY
SYSTEM
LANGUAGE
LANGUAGE
4:3 LB
MODE 2
ON
OFF
OFF
MONITOR TYPE
AUTO STANDBY
RESUME
AV COMPULINK MODE
SCREEN SAVER
DVD 1
ON SCREEN GUIDE
EXIT
EXIT
PRESS
KEY
PRESS
KEY
PARENTAL LOCK display
PARENTAL LOCK
PARENTAL LOCK
US
Country Code
Set Level
- - - -
—
PASSWORD
EXIT
PRESS
KEY
ENTER
Download from Www.Somanuals.com. All Manuals Search And Download.
Play mode displays
While stopped
During DVD VIDEO playback
DVD CONTROL
REPEAT
PROGRAM
RANDOM
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
During Video CD playback
During Audio CD playback
CD CONTROL
VCD CONTROL
REPEAT A-B REPEAT TIME SEARCH
REPEAT A-B REPEAT TIME SEARCH PBC CALL
Disk/time (DVD VIDEO)
DVD VIDEO function status
Status displays
1 / 2
1 / 2
1 / 2
Mbps
TITLE
1
CHAP.
25
TIME
2:25:25
BITRATE
3.3
ENGLISH ENGLISH
Disk/time
(Video CD with PBC)
Disk/time (Audio CD/Video CD
without PBC)
TRACK 1TIME 00:08
TRACK
1
TIME
25:25 PBC
EACH
To prevent the monitor from burning out [SCREEN SAVER]
DVD/Video CD/CD PLAYER
Download from Www.Somanuals.com. All Manuals Search And Download.
On-screen guide icons
About invalid operation icon
How to use numeric buttons
To select a track/title number
/CLOSE
1
4
2
5
8
0
3
6
9
7
+
10
10
THEATER
POSITION
ANGLE SUBTITLE AUDIO
To enter a time or chapter number
Download from Www.Somanuals.com. All Manuals Search And Download.
About discs
Playable disc types
Playable discs
1 2
3 4
1 2 3
4 5 6
ALL
1 5
1
Non-playable discs
Disc structure
Title 1
Title 2
Chapter 1
Chapter 2
Chapter 3
Chapter 1
Chapter 2
Track 1
Track 2
Track 3
Track 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Connections
Before making any connections
To connect to a TV
The unit
*
If theTV has an AV COMPU LINK terminal,
you can use the AV COMPU LINK function
(except XV-S30BK).
DIGITAL OUT
PCM / STREAM
VIDEO OUT
COMPONENT
PB
AV COMPU LINK
Y
PR
COAXIAL
OPTICAL
See “AV COMPU LINK remote control
system” on page 42 for details.
RIGHT LEFT
ADIO OUT
-VIDEO
VIDEO
T V
: except XV-S30BK
IN
Yellow
White
S-VIDEO
VIDEO
Yellow
White
Red
LEFT
AUDIO
RIGHT
Audio/Video cable
(supplied except XV-S30BK)
Red
S-video cable
(not supplied)
Download from Www.Somanuals.com. All Manuals Search And Download.
To connect to a TV with the component video input jacks
Blue
Component video cable
(not supplied)
Red
Green
The unit
DIGITAL OUT
PCM / STREAM
VIDEO OUT
COMPNENT
PB
AV COMPU LINK
Y
PR
COAXIAL
Blue
Red
OPTICAL
Green
RIGHT LEFT
ADIO OT
S-VIDEO
VIDEO
TV
IN
: except XV-S30BK
Y
PB
PR
Red
White
S-VIDEO
VIDEO
White
Red
IN
LEFT
AUDIO
RIGHT
Audio cable (not supplied)
How to make the COMPONENT VIDEO OUT jacks active
(Display Window)
-
TITLE TRACK CHAP
1
A B
VCDVD
PROGRAM
RANDOM
(Display Window)
-
TITLE TRACK CHAP
1
A B
VCDVD
PROGRAM
RANDOM
Download from Www.Somanuals.com. All Manuals Search And Download.
To connect to an audio amplifier or receiver
The unit
DIGITAL OUT
PCM / STREAM
VIDEO OUT
COMPONENT
PB
AV COMPU LINK
Y
PR
COAXIAL
OPTICAL
RIGHT LEFT
AUDIO OUT
S-VIDEO
VIDEO
: except XV-S30BK
Amplifier or receiver
Red
White
IN
White
LEFT
AUDIO
RIGHT
Red
Audio cable
(not supplied)
To connect to audio equipment with a digital input
The unit
DIGITAL OUT
PCM / STREAM
VIDEO OUT
COMPONENT
AV COMPU LINK
Y
PB
PR
COAXIAL
OPTICAL
RIGHT LEFT
ADIO OT
S-VIDEO VIDEO
Optical digital cable
(not supplied)
Red
White
: except XV-S30BK
Coaxial digital cable
(not supplied)
Digital equipment
IN
IN
White
OPTICAL
LEFT
AUDIO
RIGHT
DIGITAL
COAXIAL
Audio cable
(not supplied)
Red
(For XV-S40BK/XV-S45GD/XV-E100SL)
The OPTICAL jack is protected by the hinged cover.
To connect the optical cable to the jack, press the
cover with the plug and connect it to the jack inside
in the correct direction.
Download from Www.Somanuals.com. All Manuals Search And Download.
To connect the power cord
To install batteries in the remote control unit
Precautions for the safe use of batteries
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
In the following description, the buttons on the remote control unit are mainly used, however, you may use the
corresponding buttons on the front panel of the unit if available.
Turning on/off the unit
Press STANDBY/ON
on the remote control unit or press
on the front panel.
DVD/CD PLAYER
STANDBY
OPEN/CLOSE
0
DVD
/
VIDEO CD / CD
STANDBY ON
OPEN
/CLOSE
STANDBY/ON
STOP
PLAY
PAUSE
4
SKIP
¢
DOLBY
7
3
8
D
I
G
I
T
A
L
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
4
2
5
8
0
3
6
9
7
+
10
10
• You can turn on the unit by pressing the 3 button. In this
case, the unit starts playback if the disc is set in the disc
tray.
• If no disc is set, “NO DISC” appears on the display window.
• You can turn on the unit by pressing the 0 (OPEN/CLOSE)
button on the front panel.
NOTE
Even if you press the STANDBY/ON
•
or
button to turn off the unit, the unit is not disconnected from the AC power source
as long as it is connected to the wall outlet. This state is called the standby mode. In this state, the unit consumes a very small
amount of power.
Inserting and removing discs
1Pressꢀ0 (OPEN/CLOSE) to open the disc tray.
2Place the disc in the tray.
With the label side up
D
C
D
C
O
E
ID
V
D
V
D
E
S
U
A
P
Y
A
N
E
L
8
P
O
3
S
4
R
E
Y
A
L
P
D
V
D
0
3
-S
V
X
-
• To insert an 8-cm disc, place
I
.
C
I
C
P
O
G
M
G
L
P
M
E
RO
RA
B
Y
P
L
N
D
D
D
A
L
T
I
I
T
S
it in the inner recess.
Y
B
D
N
A
T
S
N
O
Y
B
D
DOLBY
L
N
A
A
T
T
I
S
G
I
D
3Press 0 (OPEN/CLOSE) to close the disc tray.
• If you press 0 (OPEN/CLOSE) during playback, the unit stops playback and opens the tray.
NOTES
•
The unit can playback DVD VIDEO, Audio CD, and Video CD discs only. Do not load other disc types. For details about playable
disc types, see page 12.
•
When loading a disc in the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the
tray is closed, and the disc may not be removed from the unit.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
Basic playback
Now you can play a disc. First, let’s enjoy simple playback according to following procedure.
To start playback
Press 3.
The unit starts playback from the begining.
NOTES
•
•
•
When the resume point is memorized, pressing 3 starts playback from that point instead
of the beginning. See page 19 and 38.
DIGEST
ZOOM
During playback, the display window shows the title/chapter or track number being
played.
Basic
control
buttons
SELECT
3
With Video CD discs with PBC control or some DVD discs, the menu display may appear
on the TV screen after starting playback. In such a case, select an item to be played back
from the menu.
For operation using a menu, see page 20.
•
With some DVD discs, the unit starts playback automatically after inserting the disc.
.
To stop playback completely
Press
7.
The unit stops playback.
To stop playback temporarily
Press 8.
The unit pauses playback. To resume playback, press 3.
.
To advance or reverse playback rapidly while monitoring
7 During playback
From the Remote control unit
Press 1 or ¡.
Each press of 1 or ¡ increases the playback speed. You can select the speed among 2x, 5x, 10x, 20x and 60x the
normal speed.
Pressing 3 returns the unit to normal playback.
From the Front panel
Hold down 4 or ¢.
Holding down ¢ advances playback rapidly, while holding down 4 reverses playback rapidly. The speed will
change from 5x to 20x the normal speed if you keep holding down the button for a certain period of time. Releasing
the button returns the unit to normal playback.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
To locate the beginning of the scene or song
7 During playback
Press 4 or ¢.
Press 4 to locate the beginning of the current chapter, title, or track, and press ¢ to locate the beginning of the
next chapter, title, or track.
NOTE
•
When you play a Video CD disc with the PBC function or a DVD VIDEO disc, the unit may locate a different place, but it will gen-
erally locate the beginning of the title, chapter or track.
Resuming playback
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position later.
To memorize the interrupted position
1Set the “RESUME” setting on the “SYSTEM” page of the preference display to “ON”.
(See page 38 for details about how to set.)
2At the position you want to interrupt playback, press
control or on the front panel.
7, or press STANDBY/ON
on the remote
The unit memorizes the interrupted position.
• If you interrupt playback by pressing
7
in step 2 above and then turn off the power, the memory is not cleared.
To resume playback
7 While the disc you interrupt playback last time is still in the disc tray
Press 3.
The unit starts playback from the position where you interrupted playback last time.
•
To clear the resume position memory
Carry out one of the followings.
*Take out the disc from the tray.
*Press
7
while stopped.
*Turn on the unit by pressing STANDBY/ON
(on the remote control) or
(on the front panel).
NOTES
• The resume function does not work with Audio CD discs.
• The resume function does not work if “RESUME” on the “SYSTEM” page of the preference display is set to “OFF”.
• In the case of a Video CD disc with PBC function, the unit may resume playback from a point slightly earlier than the resume
point you stored.
• The resume function does not work in the program or random mode.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Playing from a specific
position on a disc
To locate a desired scene from the DVD
menu
To locate a desired scene from the menu
of the Video CD with PBC
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
OPEN
/CLOSE
STANDBY/ON
PLAY
3D
PHONIC CANCEL RETURN
1
4
2
5
8
0
3
MODE
6
1
4
2
5
8
0
3
7
9
6
+
10
10
THEATER
2
7
9
ANGLE SUBTITLE AUDIO POSITION
+
10
10
THEATER
DIGEST
ZOOM
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
3
SELECT
1
3
1
5
ENTER
∞
2
5
ENTER
∞
RM-SXVB40A REMOTE CONTROL
RM-SXVB40A REMOTE CONTROL
1Press TITLE or MENU.
1Press 3.
Example:
Example:
2Use the numeric buttons to select the desired
item.
2Use CURSOR 5/°/2/3 to select a desired
item, then press ENTER.
Download from Www.Somanuals.com. All Manuals Search And Download.
To locate a desired selection using
4 or ¢
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
4
2
5
8
0
3
6
7
9
+
10
10
THEATER
To locate a desired selection using the
numeric buttons
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
1
SELECT
3
5
ENTER
∞
OPEN
/CLOSE
STANDBY/ON
RM-SXVB40A REMOTE CONTROL
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
4
2
5
8
0
3
6
1
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
1Press 4 or ¢.
3
5
ENTER
∞
RM-SXVB40A REMOTE CONTROL
1Use the numeric buttons to specify the number.
Download from Www.Somanuals.com. All Manuals Search And Download.
To locate a desired scene by specifying
the chapter number [CHAP.SERCH]
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
1
4
2
5
8
0
3
6
3
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
To locate a desired position in the
current title or track [TIME SEARCH]
SELECT
3
2-2, 4
5
ENTER
∞
2-1
RM-SXVB40A REMOTE CONTROL
1Press PLAY MODE.
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
1
4
2
5
8
0
3
2Use CURSOR 2/3 to move
SEARCH], then press ENTER.
to [CHAP.
6
3
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
DVD CONTROL
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
GO TO CHAPTER =
SELECT
3
2-2, 4
5
ENTER
∞
2-1
RM-SXVB40A REMOTE CONTROL
3Use the numeric buttons (0 to 9) to enter the
desired chapter number.
1Press PLAY MODE.
4Press ENTER.
2Use CURSOR 2/3 to move
SEARCH], then press ENTER.
to [TIME
Download from Www.Somanuals.com. All Manuals Search And Download.
3Use the numeric buttons (0 to 9) to enter the
time.
4Press ENTER.
(for DVD VIDEO)
(for Audio CD)
DVD CONTROL
CD CONTROL
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
REPEAT A-B REPEAT TIME SEARCH
GO TO 2 : 3 4 : 0 0
GO TO 0 2 : 3 4
To locate a desired scene from the
display [DIGEST]
Selected time
Selected time
(for Video CD)
VCD CONTROL
REPEAT A-B REPEAT TIME SEARCH PBC CALL
GO TO 0 2 : 3 4
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
4
2
5
8
0
3
Selected time
6
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
1
2
SELECT
3
3
GO TO _ : _ _ : _ _
5
ENTER
∞
GO TO 2 : _ _ : _ _
GO TO 2 : 3 _ : _ _
GO TO 2 : 3 4 : _ _
RM-SXVB40A REMOTE CONTROL
1Press DIGEST.
GO TO 2 : 3 5 : _ _
GO TO 2 : 3 _ : _ _
GO TO 2 : 3 4 : _ _
Download from Www.Somanuals.com. All Manuals Search And Download.
2Use CURSOR 5/°/2/3 to select the desired
scene.
Special picture playback
To advance a still picture
frame-by-frame
DIGEST
ZOOM
SELECT
3
1
5
ENTER
∞
Selected scene
RM-SXVB40A REMOTE CONTROL
1Press 8.
To display continuous still pictures
[STROBE]
3Press ENTER.
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
4
2
5
8
0
3
6
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
3
1, 2
5
ENTER
∞
RM-SXVB40A REMOTE CONTROL
1At the point you want to view as continuous
photographs, press 8.
2Press and hold 8 for more than 1 second.
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
To zoom a scene [ZOOM]
• Pressing 8 when the nine still pictures is shown will
advance to the next nine still pictures.
• Pressing 3 when the nine still pictures is shown will
advance pictures in normal playback speed.
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
•
To cancel strobe play
1
4
2
5
8
0
3
Press and hold 8 for more than 1 second.
6
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
NOTE
DIGEST
ZOOM
1
2
• If you press and hold 8 for more than 1 second during
playback, nine still pictures also appear but they
advance in normal playback speed.
SELECT
3
5
ENTER
∞
To playback in slow-motion
[SLOW]
RM-SXVB40A REMOTE CONTROL
7 During playback or while paused
1Press ZOOM.
OPEN
STANDBY/ON
/CLOSE
PLAY
MODE
3D
PHONIC CANCEL RETURN
“ZOOM” appears on the TV screen.
The unit zooms in to the center part of the scene to
produce a double-sized image.
1
4
2
5
8
0
3
6
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
3
1
5
ENTER
∞
RM-SXVB40A REMOTE CONTROL
ZOOM
7 During playback
1Press 8, then use 1 / ¡.
To play forward slow-motion, press ¡ , and to
play reverse slow-motion (for DVD VIDEO discs
only), press 1 . First, the unit plays the slowest
speed, and each time you press the button, the
playback speed increases.
2Use CURSOR 5/∞/2/3 to move the
zoomed-in position.
•
•
To return to normal playback
Press 3.
ZOOM
To pause slow-motion playback
Press 8.
NOTES
• The sound is muted during slow-motion playback.
• Reverse slow-motion playback is not possible for a
Video CD.
•
To return to normal playback
Press ZOOM.
NOTE
• While zoomed, the picture may look coarse.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
1
3
7
2
2
8
3
1
9
4
2
5
6
10
11
17
12
18
Changing the playback
order
13
14
15
16
The programmed title/track
number is shown under each
program number.
To playback in the desired order
[PROGRAM]
4Press 3 to start program play.
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
1
4
2
5
8
0
3
6
3
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
4
3
2-2
5
ENTER
∞
2-1
RM-SXVB40A REMOTE CONTROL
1Press PLAY MODE.
2Use CURSOR 2/3 to move
[PROGRAM] and press ENTER.
to
REPEAT
PROGRAM
RANDOM
1
7
2
8
3
9
4
5
6
10
16
11
17
12
18
13
14
15
3Specify the titles or tracks in the desined order
using the numeric buttons.
Download from Www.Somanuals.com. All Manuals Search And Download.
To playback in random order
[RANDOM]
Repeat playback
OPEN
/CLOSE
STANDBY/ON
PLAY
3D
PHONIC CANCEL RETURN
To repeat the current selection or all
tracks [REPEAT]
MODE
1
3
1
4
2
5
8
0
3
6
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
OPEN
STANDBY/ON
/CLOSE
3
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
1
4
2
5
8
0
3
5
ENTER
∞
6
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
2
DIGEST
ZOOM
RM-SXVB40A REMOTE CONTROL
SELECT
3
2-2
5
ENTER
∞
1Press PLAY MODE.
2-1
RM-SXVB40A REMOTE CONTROL
2Use CURSOR 2/3 to move
[RANDOM].
to
REPEAT
PROGRAM
RANDOM
1Press PLAY MODE.
2Use CURSOR 2/3 to move
then press ENTER.
to [REPEAT],
3Press ENTER.
DVD CONTROL
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
REPEAT TITLE
Selected repeat mode
REPEAT TITLE
(current title repeat)
REPEAT CHAPTER
(current chapter repeat)
No indication (off)
Download from Www.Somanuals.com. All Manuals Search And Download.
To repeat a desired part
[A-B REPEAT]
(for Video CD)
(for Audio CD)
VCD CONTROL
CD CONTROL
REPEAT A-B REPEAT TIME SEARCH PBC CALL
REPEAT A-B REPEAT TIME SEARCH
REPEAT ALL
REPEAT ALL
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
1
4
2
5
8
0
3
Selected repeat mode
Selected repeat mode
6
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
REPEAT ALL (all track repeat)
REPEAT 1 (current track repeat)
DIGEST
ZOOM
SELECT
3
No indication
(off)
2-2, 3
2-1
5
ENTER
∞
RM-SXVB40A REMOTE CONTROL
1Press PLAY MODE.
2Use CURSOR 2/3 to move
to [A-B
REPEAT], then press ENTER at the beginning
of the part you want to repeat (point A).
3Press ENTER at the end of the part you want
to repeat (point B).
(for DVD VIDEO)
(for Audio CD)
CD CONTROL
DVD CONTROL
REPEAT A-B REPEAT TIME SEARCH
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
A 0:00:16
B 0:01:31
A 0:00:16
B 0:01:16
Point A Point B
Point A Point B
(for Video CD)
VCD CONTROL
REPEAT A-B REPEAT TIME SEARCH PBC CALL
A 0:00:16
B 0:01:31
Point A Point B
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
•
To quit A-B repeat playback
Press 7. The unit stops playback and quits A-B repeat
mode.
Selecting a scene angle of
DVD VIDEO
• During playback, pressing ENTER when
is pointed at [A-
You can enjoy a variety of scene angles if the DVD VIDEO
disc contains “multi-angle” parts, where multiple cameras
were used to shoot the same scene from different angles.
B REPEAT] quits A-B repeat mode and continues playback.
• You can also quit A-B repeat mode by pressing 4 or ¢.
NOTES
• At the beginning of a “multi-angle” part,
TV screen.
appears on the
• To turn off the play mode menu
Press PLAY MODE.
• If
appears when pressing ENTER in step 2 during
DVD playback
To select a scene angle from the normal
screen [ANGLE]
You cannot repeat the selected portion because of the
disc contents.
• The A-B REPEAT function cannot be used during
program playback.
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
4
2
5
8
0
3
6
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
1, 2
DIGEST
ZOOM
SELECT
3
5
ENTER
∞
2
RM-SXVB40A REMOTE CONTROL
7 During DVD VIDEO playback
1Press ANGLE.
The Angle selection
display appears on the
TV screen.
1 / 3
2Use ANGLE or CURSOR 2/3 to select the
desired angle.
Each time you press ANGLE or CURSOR 2/3, the
angle changes.
1 / 3
2 / 3
3 / 3
Example:
NOTES
• The Angle selection display will automatically
disappear if you do not change the angle for 10 seconds.
• To turn off the Angle selection display manually, press
ENTER.
• When
appears on the TV screen
The current scene is not recorded from multiple angles.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
To select a scene angle from the angle
list display [ANGLE]
Changing the language and
sound
For DVD VIDEO discs, you can select the subtitle language,
as well as the audio language/sound included on a disc.
For Video CD discs, you can select the audio channel(s).
OPEN
STANDBY/ON
/CLOSE
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
4
2
5
8
0
3
6
7
9
To select the subtitle language
[SUBTITLE]
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
1
3
DIGEST
ZOOM
SELECT
3
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
5
ENTER
∞
2
1
4
2
5
8
0
3
6
7
9
+
10
10
THEATER
RM-SXVB40A REMOTE CONTROL
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
1, 2
SELECT
7 During DVD VIDEO playback
3
1Press and hold ANGLE for more than 1
5
ENTER
∞
second.
Up to nine camera
angles recorded on
a disc appear on the
TV screen.
3
RM-SXVB40A REMOTE CONTROL
7 During DVD VIDEO playback
1Press SUBTITLE.
The Subtitle selection
display appears on
the TV screen.
The selected camera angle
ON
1 / 3
ENGLISH
2Use CURSOR 5/∞/2/3 to select the desired
angle.
3Press ENTER.
The unit starts playback by the selected angle on
the full-sized screen.
2To turn the subtitle on and off, press
SUBTITLE.
3To select the desired subtitle language, use
NOTES
• When
CURSOR 2/3.
appears on the TV screen in step 1:
Each time you press
Example:
The current scene is not recorded from multiple angles.
CURSOR 2/3, the
subtitle language
• During the operation above, audio is muted.
1/3 ENGLISH
changes.
2/3 FRENCH
3/3 SPANISH
-/3 (off)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
•
For Video CD
NOTES
• For DVD VIDEO, the selected language may be abbreviated
Each time you press AUDIO or
CURSOR 2/3, the playback
audio changes as follows.
Example:
STEREO
on the TV screen. See “ Appendix A: Table of languages and
their abbreviations” at the end of this manual.
• The Subtitle selection display will automatically
disappear if you do not change the subtitle for 10
seconds.
L
R
• To turn off the Subtitle selection display manually, press
ENTER.
NOTES
• When
appears on the TV screen:
• For DVD VIDEO, the selected language may be abbreviated
on the TV screen. See “Appendix A: Table of languages and
their abbreviations” at the end of this manual.
You cannot select the subtitle.
• The Audio selection display will automatically
disappear if you do not change the audio for 10
seconds.
To change the audio language or sound
[AUDIO]
• To turn off the Audio selection display manually, press
ENTER.
• When
disc):
appears on the TV screen (for a DVD VIDEO
By AUDIO selection, you can choose the audio language of
movies or choose to enjoy karaoke with or without the vocal.
You cannot select the audio.
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
4
2
5
8
0
3
6
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
1, 2
SELECT
3
5
ENTER
∞
2
RM-SXVB40A REMOTE CONTROL
7 During playback
1Press AUDIO.
The Audio selection display appears on the TV
screen.
(for DVD VIDEO)
(for Video CD)
1 / 3
ENGLISH
STEREO
2Use AUDIO or CURSOR 2/3 to select the
desired audio.
•
For DVD VIDEO
Each time you press AUDIO
Example:
or CURSOR 2/3, the audio
1/3 ENGLISH
language or sound changes.
2/3 FRENCH
3/3 SPANISH
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the picture
character
Enjoying virtual surround
sound
To simulate surround sound
[3D PHONIC]
To select the picture character
[THEATER POSITION]
OPEN
/CLOSE
STANDBY/ON
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
PLAY
MODE
3D
PHONIC CANCEL RETURN
1, 2
1
4
2
5
8
0
3
1
4
2
5
8
0
3
6
6
7
9
7
9
+
10
10
THEATER
POSITION
+
ANGLE SUBTITLE AUDIO
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
1, 2
DIGEST
ZOOM
SELECT
3
SELECT
3
5
ENTER
∞
5
ENTER
∞
RM-SXVB40A REMOTE CONTROL
RM-SXVB40A REMOTE CONTROL
1Press 3D PHONIC.
1Press THEATER POSITION.
2Select the desired mode by using 3D PHONIC.
2Select the desired theater position by using
THEATER POSITION.
3D PHONIC DRAMA
THEATER 1
Selected effect mode
Selected picture character
THEATER 1
3D PHONIC ACTION*
3D PHONIC DRAMA
3D PHONIC THEATER
3D PHONIC OFF
THEATER 2
THEATER 3
THEATER OFF
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
•
THEATER
You can enjoy sound effects like in a major theater in
Hollywood.
Checking the status
You can view the disc/time information, as well as the
DVD functions status on the TV screen.
* When you play a DVD VIDEO disc recorded in Dolby
Digital which contains more than 3 channels, ACTION
does not appear.
To check the disc/time information
NOTES
• The 3D Phonic display will automatically disappear if
you do not change the 3D PHONIC for 5 seconds.
• To turn off the 3D PHONIC display manually, press
ENTER.
OPEN
/CLOSE
STANDBY/ON
PLAY
3D
PHONIC CANCEL RETURN
MODE
• With a Video CD disc, if the Audio setting is set to L or
R, tou cannot activate the 3D PHONIC function (i.e the
3D PHONIC mode is fixed to OFF).
1
4
2
5
8
0
3
6
7
9
Conversly, when the 3D PHONIC function is active,
changing the AUDIO setting to L or R from STEREO
cancels the 3D PHONIC function.
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
• The 3D PHONIC function works correctly when playing
back discs recorded in the Dolby Surround or Dolby
Digital 5.1-CH format.
It also works when playing back discs other than those
above, but does not provide the correct effect.
3
5
ENTER
∞
1
• The 3D PHONIC function does not affect the DTS or
Dolby Digital bitstream signal from the DIGITAL OUT
jack.
RM-SXVB40A REMOTE CONTROL
• The sound effect will not be set or operate, even if 3D
PHONIC is pressed, for the sound of DVD VIDEO discs
recorded in Linear PCM.
7 During playback
1Press DISPLAY once for a Audio CD or Video
CD disc, or twice for a DVD VIDEO disc.
The disc/time display appears on the TV screen.
• When you set the 3D PHONIC function to on, the DOWN
MIX and COMPRESSION settings in the AUDIO page of
the preference display are disabled.
(for DVD VIDEO)
Mbps
TITLE
1
CHAP.
25
TIME
2:25:25
BITRATE
3.3
Transmission
rate
Elapsed time
Current chapter number
Current title number
(for Audio CD or Video CD without playing PBC)
TRACK 1TIME 00:08
EACH
Time mode
Current track elapsed time
Current track number
(for Video CD playing with PBC)
TRACK 1TIME 00:08 PBC
PBC on status
Current track elapsed time
Current track number
•
To turn off the disc/time display
Press DISPLAY.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
To check the DVD function status
To dim the brightness of the
display window
OPEN
STANDBY/ON
/CLOSE
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
4
2
5
8
0
3
6
7
9
Dimning brightness of the display
window
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
3
OPEN
STANDBY/ON
5
ENTER
∞
/CLOSE
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
1
4
2
5
8
0
3
6
7
9
RM-SXVB40A REMOTE CONTROL
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
1
DIGEST
ZOOM
SELECT
3
1Press DISPLAY.
5
ENTER
∞
1
RM-SXVB40A REMOTE CONTROL
1 / 2
1 / 2
1 / 2
ENGLISH ENGLISH
1Press CURSOR ° while holding down ANGLE.
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
2Move
to select the item you want to set by
using CURSOR 5/∞ꢀ
Selecting preferences
AUDIO
MENU LANGUAGE
DISPLAY
SYSTEM
LANGUAGE
You can set various preferences for playback via four
dedicated displays.
ENGLISH
ENGLISH
ENGLISH
ENGLISH
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
EXIT
How to set preferences
PRESS
KEY
Note that you cannot bring up a preference display
during playback or when an Audio CD is loaded in the
tray.
3Press CURSOR 2/3 to select the setting you
want.
• To turn off the preference display, press CHOICE or
OPEN
STANDBY/ON
/CLOSE
move
to [EXIT] and press ENTER.
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
4
2
5
8
0
3
• For details about each setting, see the following
paragraphs:
6
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
LANGUAGE page
SELECT
3
MENU LANGUAGE
You can select the default “display” language to be
displayed if it is contained on the disc.
3
1
5
ENTER
∞
2
RM-SXVB40A REMOTE CONTROL
Each time you press CURSOR
AUDIO
DISPLAY
SYSTEM
LANGUAGE
ENGLISH
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
3, the language setting
changes in the following
order:
ENGLISH
ENGLISH
ENGLISH
ON SCREEN LANGUAGE
7 When no disc is inserted in the tray, or when a DVD
VIDEO or Video CD is inserted and stopped
EXIT
PRESS
KEY
1Press CHOICE.
One of the preference pages appears on the TV screen.
There are four preference pages: LANGUAGE,
AUDIO, DISPLAY and SYSTEM. To turn the page,
move to the desired tab using CURSOR 2/3.
ENGLISH → SPANISH → FRENCH → CHINESE →
GERMAN → ITALIAN → JAPANESE → language code
from AA to ZU
(See “Appendix A: Table of languages and their
abbreviations” at the end of this manual.)
LANGUAGE
AUDIO
AUDIO
DISPLAY
SYSTEM
LANGUAGE
AUDIO
DISPLAY
SYSTEM
LANGUAGE
ENGLISH
STREAM / PCM
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
DIGITAL AUDIO OUTPUT
DOWN MIX
ENGLISH
ENGLISH
ENGLISH
Lo / Ro
ON
Pressing CURSOR 2 changes the language setting in the
COMPRESSION
reverse order of the above.
ON SCREEN LANGUAGE
EXIT
EXIT
PRESS
KEY
PRESS
KEY
* If the selected language is not recorded, the disc’s
default display language will be displayed.
DISPLAY
SYSTEM
AUDIO
DISPLAY
SYSTEM
LANGUAGE
AUDIO
DISPLAY
SYSTEM
LANGUAGE
AUDIO LANGUAGE
You can select the default audio language to be played if
it is contained on the disc.
4:3 LB
MODE 2
ON
MONITOR TYPE
SCREEN SAVER
ON SCREEN GUIDE
OFF
OFF
AUTO STANDBY
RESUME
DVD 1
*
AV COMPULINK MODE
EXIT
EXIT
PRESS
KEY
PRESS
KEY
Each time you press
AUDIO
DISPLAY
SYSTEM
LANGUAGE
ENGLISH
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
CURSOR 3, the language
setting changes in the
following order:
* The “AV COMPULINK
MODE” selection is
not available with the
XV-S30BK.
ENGLISH
ENGLISH
ENGLISH
ON SCREEN LANGUAGE
EXIT
PRESS
KEY
ENGLISH → SPANISH → FRENCH → CHINESE →
GERMAN → ITALIAN → JAPANESE → language code
from AA to ZU
(See “Appendix A: Table of languages and their
abbreviations” at the end of this manual.)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
Pressing CURSOR 2 changes the language setting in the
reverse order of the above.
* If the selected language is not recorded, the disc’s
default audio language will be played.
AUDIO page
DIGITAL AUDIO OUTPUT
To connect the unit’s digital
output to an external device
equipped with a digital input,
this item must be set
correctly.
AUDIO
DISPLAY
SYSTEM
LANGUAGE
SUBTITLE
You can select the default subtitle language to be
displayed if it is contained on the disc.
STREAM / PCM
DIGITAL AUDIO OUTPUT
DOWN MIX
Lo / Ro
ON
COMPRESSION
EXIT
PRESS
KEY
AUDIO
DISPLAY
SYSTEM
LANGUAGE
Each time you press
CURSOR 3, the language
setting changes in the
following order:
ENGLISH
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
•
PCM ONLY
ON SCREEN LANGUAGE
When you connect the DIGITAL OUT jack of the unit to
the linear PCM digital input of other audio equipment.
EXIT
PRESS
KEY
•
STREAM/PCM
ENGLISH → SPANISH → FRENCH → CHINESE →
GERMAN → ITALIAN → JAPANESE → language code
from AA to ZU
(See “Appendix A: Table of languages and their
abbreviations” at the end of this manual.)
When you connect to the digital input of an amplifier
to a built-in DTS, Dolby Digital, or MPEG multichannel
decoder.
•
DOLBY DIGITAL/PCM
Pressing CURSOR 2 changes the language setting in the
reverse order of the above.
When you connect to the digital input of a Dolby
Digital decoder, or an amplifier with a built-in Dolby
Digital decoder.
* If the selected language is not recorded, the disc’s
default subtitle language will be displayed.
The following chart shows the relationship between
types of playback discs and output signals.
ON SCREEN LANGUAGE
You can select the on-screen display language to be
displayed.
Output
DOLBY
DIGITAL/
PCM
Playback discs
STREAM/
PCM
PCM ONLY
AUDIO
DISPLAY
SYSTEM
LANGUAGE
Each time you press
CURSOR 3, the language
setting changes as follows:
ENGLISH
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
DVD with 48 kHz, 48 kHz,16 bit
16 bit linear PCM linear PCM
+
+
+
+
+
ON SCREEN LANGUAGE
EXIT
DVD with 48 kHz, 48 kHz,
PRESS
KEY
20/24 bit linear
PCM
20/24 bit
linear PCM
DVD with 96 kHz, No output
linear PCM
+
+
DVD with DTS
DTS bitstream No ouput
DVD with Dolby
Digital
Dolby Digital
bitstream
48 kHz, 16 bit
linear PCM
+
DVD with MPEG MPEG
48 kHz, 16 bit
linear PCM
+
multichannel
bitstream
Video CD
44.1 kHz,
16 bit
linear PCM
English
Spanish
French
ON SCREEN LANGUAGE
IDIOMA EN PANTALLA
ENGLISH
+
+
Audio CD
48 kHz,16 bit
linear PCM
+
+
+
+
FRANCAIS
Audio CD with DTS DTS bitstream
Pressing CURSOR 2 changes the language setting in the
reverse order of the above.
NOTES
• The unit does not provide the DTS decoding function.
• When playing a DVD VIDEO or Audio CD disc with DTS,
use a DTS decoder to get correct signals from your
speakers. Never use the unit's analog output jacks,
which output incorrect signals that may damage your
speakers.
• If you connect the analog outputs and digital outputs
simultaneously, be sure to select the source of the
amplifier correctly, or set the level control of the
amplifier connected to the analog outputs to minimum.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
DOWN MIX
To playback a DVD VIDEO
disc recorded with surround
multichannel audio
correctly, the DOWN MIX
setting must be properly
made according to your
audio system.
Note that this setting affects the output signal from the
AUDIO (both DIGITAL and ANALOG) output jacks when
playing back a DVD VIDEO disc recorded with surround
multichannel audio.
DISPLAY page
MONITOR TYPE
You can select the monitor
type to match your TV
when you playback DVD
VIDEO discs recorded for
wide screen televisions.
AUDIO
DISPLAY
SYSTEM
LANGUAGE
STREAM / PCM
DIGITAL AUDIO OUTPUT
DOWN MIX
Lo / Ro
ON
COMPRESSION
AUDIO
DISPLAY
4:3 LB
SYSTEM
LANGUAGE
EXIT
MONITOR TYPE
SCREEN SAVER
ON SCREEN GUIDE
MODE 2
ON
PRESS
KEY
EXIT
PRESS
KEY
•
4:3 LB
(Letter Box Conversion)
When you connect a normal
TV to the unit.
•
Lt/Rt
When you enjoy multichannel surround audio by
connecting the unit’s AUDIO output (normally, the
DIGITAL output) to a surround decoder.
When you play a wide picture
recorded on a DVD VIDEO disc,
the picture is displayed with
bands across the upper and
lower portions of the screen.
•
L0/R0
When you enjoy conventional 2-channel stereo audio
by connecting the unit’s AUDIO output to a stereo
amplifier/receiver or television set, or when you
duplicate audio of a DVD VIDEO disc recorded with
surround audio to your MD, cassette, etc.
•
4:3 PS
(Pan Scan Conversion)
When you connect a normal TV to the unit.
When you play a wide picture recorded on a DVD
VIDEO disc, a portion of the picture is automatically
cut off from the left and right sides of the image.
Depending on the disc, it may
NOTES
not be possible to playback in
this mode. In that case, the
• The Down mix function does not work when the 3D
PHONIC function is activated.
picture is played back as in 4:3
• The DOWN MIX setting does not affect an MPEG or
Dolby Digital bitstream signal from DIGITAL OUT.
LB
mode.
To enjoy the DOWN MIX effect from DIGITAL OUT when
playing back a disc recorded with the MPEG
multichannel or Dolby Digital format, set “DIGITAL
AUDIO OUTPUT” to “PCM ONLY” (see page 36).
•
16:9 WIDE (Wide Television screen)
When you connect a
wide-screen TV to the
unit.
• When playing back a disc recorded with DTS, you
cannot get the DOWN MIX effect from both DIGITAL
and ANALOG outputs.
COMPRESSION
You can compress the dynamic
range of the sound if needed.
Using this function, you can
listen to sound at low volumes
easily.
SCREEN SAVER
AUDIO
DISPLAY
SYSTEM
LANGUAGE
A television monitor screen may be burned out if a static
picture is displayed for a long time. To prevent this, the
unit automatically activates the screen saver function if a
static picture, such as an on-screen display or menu, is
displayed for over 5 minutes.
STREAM / PCM
DIGITAL AUDIO OUTPUT
DOWN MIX
Lo / Ro
ON
COMPRESSION
EXIT
PRESS
KEY
•
MODE 1
•
•
ON
AUDIO
DISPLAY
4:3 LB
SYSTEM
LANGUAGE
The current picture gets
dark.
MONITOR TYPE
SCREEN SAVER
ON SCREEN GUIDE
Audio is played back with the dynamic range
compressed.
MODE 2
ON
EXIT
•
MODE 2
OFF
PRESS
KEY
The “screen saver” picture
appears and its brightness
changes.
Audio is played back as it was recorded.
NOTES
•
OFF
• The Compression function works only when playing
back a disc recorded with DOLBY DIGITAL 1CH or 2CH.
The setting is not effective for other discs.
The screen saver function is off.
• The Compression function does not work when the 3D
PHONIC function is activated.
NOTES
• The monitor screen of a projector or projection TV is
easily burned out if the screen saver mode is set to OFF
and a static picture is displayed for a long time.
• The screen saver function is not activated when the
selected disc is an Audio CD.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
ON SCREEN GUIDE
SYSTEM page
The unit can display “on-
screen guide” icons or
characters on the picture,
which show what is
happening to the disc or the
unit.
AUDIO
DISPLAY
4:3 LB
SYSTEM
LANGUAGE
MONITOR TYPE
SCREEN SAVER
ON SCREEN GUIDE
MODE 2
ON
AUTO STANDBY
(XV-S40BK/XV-S45GD/
XV-E100SL)
When the unit is stopped for
more than 30 minutes or 60
minutes, the unit enters standby
mode automatically.
EXIT
AUDIO
DISPLAY
SYSTEM
LANGUAGE
PRESS
KEY
OFF
OFF
AUTO STANDBY
RESUME
DVD 1
AV COMPULINK MODE
EXIT
•
•
ON
PRESS
KEY
The on-screen guide will be displayed.
•
•
•
60
Time is set to 60 minutes.
OFF
The on-screen guide will not be displayed.
Examples of “on-screen guide” icons or characters:
30
(XV-S30BK)
Time is set to 30 minutes.
AUDIO
DISPLAY
SYSTEM
LANGUAGE
,
,
OFF
OFF
AUTO STANDBY
RESUME
OFF
The auto standby function
is off.
EXIT
PRESS
KEY
RESUME
You can select the resume
function to be on or off. See
page 19.
(XV-S40BK/XV-S45GD
XV-E100SL)
AUDIO
DISPLAY
SYSTEM
LANGUAGE
OFF
OFF
AUTO STANDBY
RESUME
•
ON
DVD 1
AV COMPULINK MODE
Pressing 3 while stopped
or on standby starts
EXIT
PRESS
KEY
playback from the resume
point if it is memorized.
•
OFF
(XV-S30BK)
Pressing 3 while stopped
or on standby starts
playback from the
AUDIO
DISPLAY
SYSTEM
LANGUAGE
OFF
OFF
AUTO STANDBY
RESUME
beginning of the disc.
EXIT
PRESS
KEY
AV COMPULINK MODE (except XV-S30BK)
If you use the AV Compulink
system, you must set this
item correctly.
Select from the three options:
“DVD1,” “DVD2” and “DVD3”
according to the equipment to
be connected.
AUDIO
DISPLAY
SYSTEM
LANGUAGE
OFF
OFF
AUTO STANDBY
RESUME
DVD 1
AV COMPULINK MODE
EXIT
PRESS
KEY
See page 42.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
4While
points [Set Level], use CURSOR 2/
3 to select the parental lock level.
Limiting playback by
children
PARENTAL LOCK
US
1
Country Coce
Set Level
- - - -
PASSWORD
This function restricts playback of DVD VIDEO discs
which contain violent (and other) scenes according to the
level set by the user. For example, if a movie which
includes violent scenes supports the parental lock
feature, such scenes which you do not want to let
children view can be cut or replaced with other scenes.
EXIT
PRESS
KEY
ENTER
Each time you press CURSOR 2/3, the parental
level changes as follows:
1
.
To set Parental Lock for the first time
[PARENTAL LOCK]
.
.
8
–
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
4
2
5
8
0
3
• “1” is the strictest level. “–” means no restriction. Discs
rated higher than the selected level are restricted.
6
6
1
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
5Press ENTER.
SELECT
3
moves to [PASSWORD].
1, 3, 5, 7
2, 4
5
ENTER
∞
6Enter your 4-digit password using the numeric
buttons (0 to 9).
PARENTAL LOCK
RM-SXVB40A REMOTE CONTROL
US
8
Country Code
Set Level
- - - -
PASSWORD
EXIT
NEW PASSWORD? ••• PRESS 0~9 KEY.
7 While a DVD VIDEO disc is stopped or no disc is inserted
1Press ENTER while holding down 7 on the
remote control unit.
7Press ENTER.
The Parental Lock on-screen display appears on the
TV screen.
The parental level and password are set.
moves to [EXIT].
points [Country Code].
Pressing ENTER again returns to the opening
display.
2While
points [Country Code], use
CURSOR 2/3 to select the “US” for country
code.
• If you enter an undesired password in step 6 above, reenter
the password before pressing ENTER.
The country code whose standards were applied to
rate the DVD VIDEO disc should be selected.
See “Appendix B: Country code list for parental
lock”
PARENTAL LOCK
US
—
Country Code
Set Level
- - - -
PASSWORD
EXIT
PRESS
KEY
ENTER
3Press ENTER.
moves to [Set Level].
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
4To change the set level, use CURSOR 2/3 to
To change the settings [PARENTAL
LOCK]
select the desired level while
Level], and then press ENTER.
moves to [PASSWORD].
points [Set
You can change the Parental lock settings later.
5Enter the password using the numeric buttons
(0 to 9) and press ENTER.
moves to [EXIT].
OPEN
STANDBY/ON
/CLOSE
PLAY
3D
PHONIC CANCEL RETURN
The password entered in the above step becomes
the new password. If you do not change the
password, enter the same password as in the step 2.
Even if you want to change only the country code
and/or parental level, do not forget to enter the
password after changing the country code and/or
parental level. Otherwise, the new country code
and/or parental level will not become effective.
Pressing ENTER again returns to the opening display.
MODE
1
4
2
5
8
0
3
6
2-1, 5-1
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
3
1, 2-2, 3-2,
4-2, 5-2
1
5
ENTER
∞
NOTES
3-1, 4-1
• When you enter the wrong password more than 3 times
RM-SXVB40A REMOTE CONTROL
in step 2 above,
moves to [EXIT] automatically and
CURSOR 5/∞ does not work.
• If you forget your password in step 2
Enter “8888.”
7 While a DVD VIDEO disc is stopped or no disc is inserted
1Press ENTER while holding down 7 on the
remote control unit.
The Parental Lock on-
PARENTAL LOCK
screen display appears
US
8
Country Code
Set Level
on the TV screen.
points [PASSWORD].
- - - -
PASSWORD
EXIT
CURRENT PASSWORD? ••• PRESS 0~9 KEY
2Enter your current 4-digit password using the
numeric buttons (0 to 9) and press ENTER.
moves to [Country Code] if you enter the correct
password.
If you enter the wrong password, “WRONG!
RETRY...” appears on the TV screen, and you
cannot go to next step.
3To change the country code, use CURSOR
2/3 to select the desired country code and
press ENTER.
moves to [Set Level].
When you change the country code, you must
select the parental level.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
To temporarily release the Parental
lock [PARENTAL LOCK]
When you set the parental level strictly, some discs may
not be played back at all. When you insert such a disc
and try to play it, the following Parental Lock on-screen
display appears on the TV screen, asking you whether
you want the parental lock to be temporarily released or
not.
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
3D
PHONIC CANCEL RETURN
1
4
2
5
8
0
3
6
2
7
9
+
10
10
THEATER
ANGLE SUBTITLE AUDIO POSITION
DIGEST
ZOOM
SELECT
3
1-2
5
ENTER
∞
1-1
RM-SXVB40A REMOTE CONTROL
1Use the CURSOR
5
/∞
to move
to [YES],
then press ENTER.
moves to the
PASSWORD field.
When selecting [NO],
press OPEN/CLOSE
to remove the disc.
PARENTAL LOCK
This DISC can’t play now!
Temporary
Level Change ?
YES
NO
– – – –
PASSWORD
PRESS ENTER
EXECUTE
2Enter your 4-digit password using the numeric
buttons (0 to 9).
If you enter the wrong password, “WRONG!
RETRY...” appears on the TV screen.
Enter the correct password.
The Parental lock is released, and the unit starts playback
.
NOTE
• When you enter the wrong password more than 3 times
in step 2 above, moves to [NO] automatically and
CURSOR 5/∞do not work.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
AV COMPU LINK remote control system (not available with
XV-S30BK)
The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest
operation.
If your video/audio player (such as a DVD player, CD player and VCR) and television or/and
amplifier/receiver support the JVC AV COMPU LINK system and are tied with the JVC AV
COMPU LINK cable(s), when you simply starting the player, all the necessary settings of
the television and/or amplifier/receiver for enjoying playback are automatically performed.
NOTE
• The cable for connecting between the AV COMPU LINK jacks is not supplied with the unit. Purchase an optional audio cable
with monaural mini-plugs on both ends for AV COMPU LINK connection.
Connection and setup
Using the AV COMPU LINK cable, connect the AV COMPU LINK terminals of each component to one another.
To AV COMPU LINK (II or EX)
TV
DVD player
• If you connect a DVD player to a television via AV COMPU LINK, set the DVD player’s AV COMPU LINK setting as
follows.
• When connecting to VIDEO-1 input terminal of the television: DVD2
• When connecting to VIDEO-2 input terminal of the television: DVD3
To AV COMPU LINK (II or EX)
To AV COMPU LINK
TV
DVD player
VCR (Video Cassette Recorder)
• If you connect a DVD player to a television and VCR via AV COMPU LINK, set the VCR’s Remote Control Code and DVD
player’s AV COMPU LINK setting as follows.
• When connecting to VIDEO-1 input terminal of the television:
DVD player’s AV COMPU LINK setting: DVD2
VCR’s Remote Control Code: B
• When connecting to VIDEO-2 input terminal of the television:
DVD player’s AV COMPU LINK setting: DVD3
VCR’s Remote Control Code: A
To AV COMPU LINK (II or EX)
TV
Receiver
DVD player
• If you connect a DVD player to a television and receiver via AV COMPU LINK, set the DVD player’s AV COMPU LINK
setting to DVD1.
• The DVD player’s AV COMPU LINK setting is operated in the SYSTEM page of the preference display.
See page 38 for operation.
• For information on the connection between the TV and the Receiver, refer to the Receiver’s Instructions.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
IMPORTANT!
You connect the component video output to your TV:
• Set the DVD player’s AV COMPULINK setting to DVD1.
• Make the video/audio connection between the DVD player and your receiver using the supplied audio/video cable, and do
not make the S-VIDEO connection.
Notes for connection
• If you connect a DVD player to a receiver via AV COMPU LINK in a system including a Dolby digital decoder, some functions
may not be performed automatically.
• The AV COMPU LINK terminal on some televisions indicates “II.” Do not connect the terminal indicating “II” with the AV
COMPU LINK terminal on a receiver. If connected, the system will not work correctly.
• Connect the AUDIO OUT jacks of the DVD player to the audio input jacks of a receiver that indicating “DVD.” Otherwise, the
system will not work correctly.
• There may be no description about connections to a DVD player in the instruction manual of a television or VCR. However a
television or VCR with AV COMPU LINK terminals indicating “II” or “EX” can be connected to a DVD player.
Operation
You can enjoy pictures and/or sound by just putting a source component (which plays back the pictures and/or sound
such as a DVD player or VCR) into play mode. You do not have to operate the TV and receiver including not having to
perform power switching.
1Turn on the main power of the television.
2Insert a disc into the source component.
3Press 3 of the source component.
The following actions are performed automatically:
• Turning on the power for the television.
• Setting the source of the television to the external input (VIDEO-1 or VIDEO-2).
• Turning on the power for the receiver.
• Setting the source of the receiver to the component which has started playback.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and handling of discs
How to handle discs
Label side
Storage
Maintenance of discs
CAUTION
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Troubleshooting
What appears to be a malfunction may not always be serious. Please go through the following list before requesting
service.
Symptom
Possible case
Remedy
Power does not come on.
Power plug is not inserted securely.
Plug in securely.
Too far from the unit.
More closer to the unit.
The tip of the remote unit is not pointed in
the right direction.
Point the infrared light- emitting window
toward the remote sensor on the front panel.
Remote control does not work.
Batteries are exhausted.
Replace the batteries with new ones.
Take out the batteries and insert them again in
the correct direction.
Battery polarity is incorrect.
Connection of video cable is incorrect.
Input selection of TV is incorrect.
Disc is not playable.
Connect the cable correctly.
Select correctly.
No picture is displayed on the
monitor.
Use a playable disc. (See page 12.)
No picture is displayed on the
monitor when using the
COMPONENT or S-VIDEO output
jack(s).
Jack(s) at use is (are) not active.
Make them active. (See page 14.)
The unit is connected to a VCR directly
and the copyguard function is activated.
Connect the unit so that the picture signal
flows directly to the TV.
Picture is noisy.
Connection is incorrect.
Check the connections.
Select correctly.
No audio is reproduced.
Input selection of amplifier is incorrect.
No audio is reproduced when
playing back a DVD disc recorded
with 96 kHz, linear PCM audio.
The audio signal is derived from the unit's
DIGITAL OUT.
Use the AUDIO OUT when playing back such
discs.
Sound is distorted or noise is
generated.
Disc is dirty.
Wipe the disc surface.
MONITOR TYPE is not correctly set.
Television is not correctly set.
Select monitor type correctly. (See page 37.)
Set the television correctly.
Picture does not fit the television
screen.
Microcomputer malfunction due to
lightning or static electricity.
Turn off the power and unplug the power
cord, then connect the power cord again.
Operation is not possible.
Moisture condensation caused by a
sudden change of temperature or
humidity.
Turn off the power, then turn it on a few hours
later.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Specifications
General
Readable discs:
Video format:
DVD VIDEO, Audio CD, Video CD
NTSC
Other
Power requirements:
Power consumption:
Mass:
AC 120 V
, 60 Hz
16 W (POWER ON), 2.2 W (STANDBY mode)
2.6 kg (5.8 lbs)
Dimensions (W x H x D):
435 mm x 68 mm x 267.5 mm
(17-3/16 inch x 2-11/16 inch x 10-9/16 inch)
Video outputs
COMPONENT (pin jacks):
Y Output:
1.0 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
PB/PR Output:
1.0 Vp-p (75 Ω)
Y Output:
C Output:
500 Lines
VIDEO OUT (pin jack):
S-VIDEO OUT (S jack):
1.0 Vp-p (75 Ω)
286 mVp-p (75 Ω)
Horizontal resolution:
Audio outputs
ANALOG OUT (pin jack):
DIGITAL OUT: (COAXIAL):
(OPTICAL):
2.0 Vrms (10 kΩ)
0.5 Vp-p (75 Ω termination)
–21 dBm to –15 dBm (Peak) (except XV-S30BK)
Audio characteristics
Frequency response:
CD
(sampling frequency 44.1 kHz): 2 Hz to 20 kHz
DVD (sampling frequency 48 kHz):
DVD (sampling frequency 96 kHz):
16 bit: More than 98 dB
2 Hz to 22 kHz
2 Hz to 44 kHz
Dynamic range:
20 bit: More than 106 dB
24 bit: More than 106 dB
Wow and flutter:
Total harmonic distortion:
Unmeasurable (less than 0.002%)
Less than 0.002%
* Specifications and appearance subject to change without prior notice.
Appendix A:Table of languages and their abbreviations
When you select the subtitle language or sound, the languages shown below are displayed as abbreviations. To select
the desired language, select the abbreviation corresponding the language you want to.
FA
FI
FJ
Persian
Finnish
Fij i
Faroese
Frisian
KM Cambodian
OM (Afan) Oromo
SU
SV
Sundanese
Swedish
AA
AB
AF
Afar
Abkhazian
Afrikaans
KN
KO
KS
KU
KY
LA
LN
LO
LT
Kannada
Korean (KOR)
Kashmiri
Kurdish
Kirghiz
Latin
OR
PA
PL
PS
PT
Oriya
Panjabi
Polish
Pashto, Pushto
Portuguese
SW Swahili
FO
FY
GA Irish
GD Scots Gaelic
GL
GN Guarani
GU Gujarati
HA
HI
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
Tamil
Telugu
Tajik
AM Ameharic
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
QU Quechua
RM Rhaeto-Romance
Thai
Galician
Lingala
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Laothian
Lithuanian
Latvian, Lettish
RN
RO
RU
Kirundi
Rumanian
Russian
Hausa
Hindi
Croatian
LV
MG Malagasy
MI Maori
RW Kinyarwanda
HR
SA
SD
SG
SH
SI
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
HU Hungarian
MK Macedonian
ML Malayalam
MN Mongolian
MO Moldavian
MR Marathi
MS Malay (MAY)
MT Maltese
MY Burmese
NA Nauru
HY
IA
IE
IK
IN
IS
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
TW Twi
UK
UR
UZ
VI
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
SK
SL
Slovenian
SM Samoan
IW
JI
SN
SO
SQ
SR
SS
ST
Shona
VO
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
Yiddish
Somali
Albanian
Serbian
Siswati
Sesotho
WO Wolof
JW Javanese
NE
NL
Nepali
Dutch
XH
YO
ZU
Xhosa
Yoruba
Zulu
KA
KK
KL
Georgian
Kazakh
Greenlandic
EO
ET
EU
NO Norwegian
OC Occitan
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B:Country code list for parental lock
Download from Www.Somanuals.com. All Manuals Search And Download.
QUALITY
SERVICE
HOW TO LOCATE YOUR JVC SERVICE CENTER
TOLL FREE : 1-800-537-5722
Dear customer:
In order to receive the most satisfaction from your purchase, read the instruction booklet before operating the unit. In the event that repair
is necessary, or for the address nearest your location, please refer to the factory service center list below or within the Continental United
States, Call 1-800-537-5722 for your authorized servicer. Remember to retain your Bill of Sale for Warranty Service.
—JVC
JVC SERVICE & ENGINEERING
COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
FACTORY SERVICE CENTER LOCATIONS
10 New Maple Avenue
Pine Brook, NJ 07058-9641
(973) 396-1000
1500 Lakes Parkway
Lawrenceville, GA 30243-5857
(770) 339-2582
705 Enterprise Street
Aurora, IL 60504-8149
(630) 851-7855
5665 Corporate Avenue
Cypress, CA 90630-0024
(714) 229-8011
2969 Mapunapuna Place
Honolulu, HI 96819-2040
(808) 833-5828
10700 Hammerly, Suite 110
Houston, TX 77043
(713) 935-9331
13 Cummings Park
Woburn, MA 01801
(781) 376-9100
8192 State Road 84
Davie, FL 33324
(954) 472-1960
890 Dubuque Avenue
South San Francisco, CA 94080-1804
(650) 871-2666
Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of
the wide array of JVC products, service is the key to maintaining the high level of performance for which JVC is world famous. The
JVC service and engineering organization stands behind our products.
NATIONAL HEADQUARTERS
JVC SERVICE & ENGINEERING COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road
Wayne, NJ 07470
If you ship the product • • •
Don’t service it yourself.
Pack your JVC unit in the original carton or one of equivalent
size and strength. Enclose, with the unit, a letter stating the
problem or symptom that exists and also a copy of the receipt
CAUTION
orbillofsaleyoureceivedwhenyoupurchasedyourJVCunit.
Print your home return address on the outside and the inside
of the carton. Send to the appropriate JVC Factory Service
Center as listed above.
To prevent electrical shock, do not open the cabinet. No user
serviceable parts inside.
Refer servicing to qualified service personnel.
ACCESSORIES
To purchase accessories for your JVC product, you may contact your local JVC Dealer.
Or from the 48 Continental United States call toll free : 800-882-2345
(1099)
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
CONSUMER VIDEO 1-90
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL
PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original retail
purchase for the period as shown below. (“The Warranty Period.”)
PARTS
LABOR
1YR
90DAYS
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY(50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN
COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO:
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair
and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts
used for replacement are warranted only for the remainder of the Warranty Period. All products and parts thereof may be
brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and
above which are covered on an in-home basis.
WHAT YOU MUST DO FOR WARRANTY SERVICE:
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized
service center, please call toll free: (800)537-5722.
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of
your bill of sale plus and letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location
of which will be given to you by the toll-free number.
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.
WHAT IS NOT COVERED:
This limited warranty provided by JVC does not cover:
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by JVC to
render such service, or if affixed to any attachment not provided with the products, or if the model number or serial number
has been altered, tampered with, defaced or removed;
2. Initial installation and installation and removal for repair;
3. Operational adjustments covered in the Owner’s Manual, normal maintenance, video and audio head cleaning;
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;
5. Signal reception problems and failures due to line power surge;
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus(Needle) are covered for 90 days from the date of purchase;
7. Accessories;
8. Batteries (except the Rechargeable Batteries are covered for 90 days from the date of purchase);
There are no express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO
TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET
FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied warranty
last, so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
JVC COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road
Wayne, NJ 07470
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF
REFURBISHED PRO DUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION
PACKAGED WITH EACH REFURBISHED PRODUCT.
For customer use:
Enter below the Model No. and Serial No. which is located either on the rear, bottom or side of the cabinet. Retain this
information for future reference.
Model No.:
Serial No.:
Purchase date:
Name of dealer:
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
J
V
C
0301AOMUBNJSC
EN.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Ingersoll Rand Grinder 7980 User Manual
Jacuzzi Swimming Pool Vacuum J 315 User Manual
Jenn Air Oven W2410 User Manual
JVC Cassette Player TD W254 User Manual
Kalorik Hot Beverage Maker JK 19967 User Manual
Kenwood Digital Camera DVT 6300 User Manual
Keys Fitness Home Gym KPS LEGA User Manual
KitchenAid Ice Maker KUIS15NRHB5 User Manual
Klipsch Portable Speaker Sattelite Speaker User Manual
Kodak Network Card 100 120EX User Manual