COLOR VIDEO MONITOR
INSTRUCTIONS
TM-1650SU
For Customer Use:
Enter below the Serial No. which is located on the rear of
the cabinet. Retain this information for future reference.
Model No. :
Serial No. :
TM-1650SU
B
A
UNDER
SCAN
RGB/
COMPO.
–
+
Y/ C
VIDEO
VIDEO
ON
OFF
INPUT SELECT
TM-1650SU
PHASE CHROMA BRIGHT CONTRAST
MENU
VOLUME/SELECT
POWER
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
SAFETY PRECAUTIONS................................................................................. 2
CONTROLS AND FEATURES ......................................................................... 4
HOW TO HANDLE BASIC OPERATIONS....................................................... 7
HOW TO USE THE MENU FUNCTIONS ......................................................... 8
HOW TO INITIALIZE THE SETTING ............................................................. 12
BASIC CONNECTION EXAMPLE ................................................................. 13
TROUBLESHOOTING.................................................................................... 15
SPECIFICATIONS .......................................................................................... 16
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND FEATURES
FRONT VIEW
<Front Panel>
3 4
13
1
2
5
7 8 9 10
6
11
12
19
B
A
UNDER
SCAN
RGB/
COMPO.
–
+
Y/ C
VIDEO
VIDEO
ON
OFF
INPUT SELECT
TM-1650SU
PHASE CHROMA BRIGHT CONTRAST
MENU
VOLUME/SELECT
POWER
UNDER
SCAN
RGB/
COMPO.
B
A
–
+
Y/
C
VID
E
O
VIDEO
ON
OFF
INPUT SELECT
TM-1650SU
PHASE CHROMA BRIGHT CONTRAST
MENU
VOLUME/SELECT
POWER
14 15 16 17 18
Input B (Y/C) button [INPUT SELECT B Y/C ]
Selects the video signal input to the VIDEO B (Y/C)
terminal and the audio signal input to the AUDIO B
terminal on the rear panel. When selected, the input B
(Y/C) indicator ^ lights.
9
1 Phase button [PHASE
]
Press this button to set the picture hue adjustment mode.
Adjust the value with the VOLUME/SELECT buttons. Also
used as a control button in the menu function mode.
2 Chroma button [CHROMA
]
Input B (VIDEO) button [INPUT SELECT B
VIDEO ]
Selects the video signal input to the VIDEO B terminal
and the audio signal input to the AUDIO B terminal on the
rear panel. When selected, the input B (VIDEO) indicator
& lights.
10
11
Press this button to set the picture color density adjust-
ment mode. Adjust the value with the VOLUME/SELECT
buttons. Also used as a control button in the menu
function mode.
3
Brightness button [BRIGHT
]
Press this button to adjust picture brightness. Adjust the
value with the VOLUME/SELECT buttons. Also used as a
control button in the menu function mode.
Input A (VIDEO) button [INPUT SELECT A
VIDEO ]
Selects the video signal input to the VIDEO A terminal and
the audio signal input to the AUDIO A terminal on the rear
panel. When selected, the input A (VIDEO) indicator *
lights.
Contrast button [CONTRAST
]
4
5
Press this button to adjust picture contrast. Adjust the
value with the VOLUME/SELECT buttons. Also used as a
control button in the menu function mode.
Power indicator
Lights in green when the power is ON.
12
13
Menu button [MENU]
Lit
: When the power is on.
Displays and disappears the <MENU> screen.
Pressing the PHASE button with the Menu button
depressed will display the <SET-UP MENU> screen.
Unlit : When the power is off.
Power switch [POWER
]
Press this switch to turn the power on or off.
g ON : Power is turned on.
G OFF : Power is turned off.
6 Volume/Select buttons [VOLUME/
SELECT – +]
Adjusts the speaker volume. Also used as a control button
in the menu function mode.
UNDER SCAN indicator
Lights in green when UNDER SCAN is selected.
14
15
16
7
Under Scan button [UNDER SCAN]
Reduces the screen size to display the whole screen.
Press the button again to quit Under Scan.
Input RGB/COMPO. indicator
Lights in green when Input RGB/COMPO. is selected.
8 Input RGB/COMPO. button [INPUT SELECT
Input B (Y/C) indicator
Lights in green when Input B (Y/C) is selected.
RGB/ COMPO. ]
Selects the video signal input to the RGB/COMPO.
(analog RGB/Y, B-Y, R-Y) terminal and the audio signal
input to the AUDIO RGB/COMPO. terminal on the rear
panel. When selected, the input RGB/COMPO. indicator
% lights.
17 Input B (VIDEO) indicator
Lights in green when Input B (VIDEO) is selected.
18 Input A (VIDEO) indicator
Lights in green when Input A (VIDEO) is selected.
Note:
Speaker
19
A built-in speaker is located inside the right side panel
when the monitor is viewed from the front.
● RGB or COMPONENT signals can be selected in the
<MENU> screen.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
REAR VIEW
<Rear Panel>
IN
OUT
A
20
21
IN
OUT
VIDEO
IN
IN
OUT
OUT
A
B
B
IN
VIDEO
IN
Y/C
Y/C
22
23
OUT
Y/G
B-Y
/B
OUT
Y/G
RGB /
COMPO.
RGB
SYNC
R-Y
/R
IN
IN
OUT
A
OUT
AUDIO
B
B-Y
/B
RGB /
COMPO.
IN
OUT
INPUT
A/B
ASPECT
REMOTE
RGB /
COMPO.
RGB
SYNC
R-Y
/R
28
IN
IN
OUT
A
24
25
To AC outlet
(120 V AC, 50/60 Hz)
OUT
AUDIO
B
RGB /
COMPO.
IN
OUT
26
27
29
INPUT
A/B
ASPECT
REMOTE
20 Video A terminals [VIDEO A IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
RGB/COMPO. terminals
23
Input terminals for analog RGB/Y, B-Y, R-Y signals.
* The RGB SYNC input terminal is for the external
synchronization (composite synchronization) signal
when an analog RGB signal is input.
IN
: Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
Notes:
* For corresponding audio signals, use the AUDIO A
terminals r.
● For corresponding audio signals, use the AUDIO RGB/
COMPO. terminal y.
* Also refer to BASIC CONNECTION EXAMPLE
on page 13.
● When an analog RGB signal is input, be sure to input
the external synchronization signal to the RGB SYNC
terminal.
21
Video B terminals [VIDEO B IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
● Also refer to BASIC CONNECTION EXAMPLE
on page 14.
24 Audio A terminal [AUDIO A IN/OUT]
Input (IN) and output (OUT) terminals for the audio signal
corresponding to the VIDEO A terminals ). The output
terminal is bridge-connected.
IN
: Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
IN
: Audio signal input terminal
* For corresponding audio signals, use the AUDIO B
terminals t.
* Also refer to BASIC CONNECTION EXAMPLE
on page 13.
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO A
terminal ).
Video B (Y/C) terminals [VIDEO BY/C IN/
OUT]
Y/C (S-Video) signal input (IN) and output (OUT)
terminals.
22
* Also refer to BASIC CONNECTION EXAMPLE
on page 13.
The output terminal is bridge-connected.
IN
: Y/C-separated (S-video) signal input terminal
OUT : Bridge-connected Y/C-separated (S-video) signal
output terminal
Notes:
* For corresponding audio signals, use the AUDIO B
terminals t.
* Also refer to BASIC CONNECTION EXAMPLE
on page 14.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND FEATURES (cont'd)
REAR VIEW
<Rear Panel>
IN
OUT
A
20
21
IN
OUT
VIDEO
IN
IN
OUT
OUT
A
B
B
IN
VIDEO
IN
Y/C
Y/C
22
23
OUT
Y/G
OUT
Y/G
B-Y
/B
RGB /
COMPO.
RGB
SYNC
R-Y
/R
IN
IN
OUT
A
OUT
AUDIO
B
B-Y
/B
RGB /
COMPO.
IN
OUT
INPUT
A/B
ASPECT
REMOTE
RGB /
COMPO.
RGB
SYNC
R-Y
/R
28
To AC outlet
(120 V AC, 50/60 Hz)
IN
IN
OUT
A
24
25
OUT
AUDIO
B
RGB /
COMPO.
IN
OUT
26
27
29
INPUT
A/B
ASPECT
REMOTE
Remote terminals [REMOTE INPUT A/B,
ASPECT]
Remote terminals for external control. Selecting INPUT A
or INPUT B and the ASPECT RATIO is available via
external control. External control is set in the <SET-UP
MENU> screen.
27
Audio B terminals [AUDIO B IN/OUT]
Input (IN) and output (OUT) terminals for the audio signals
corresponding to the VIDEO B terminals q or VIDEO B
(Y/C) terminals w. The output terminal is bridge-
connected.
25
IN
: Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
To use external control, you must build a switch cable and
connect it to the REMOTE terminals.
Notes:
External control switch
External control
functions
* For corresponding video signals, use the VIDEO B
terminals q or VIDEO B (Y/C) terminals w.
* Also refer to BASIC CONNECTION EXAMPLE
on page 13.
Open circuit
(open)
Closed circuit
(short)
ASPECT RATIO
INPUT A/B
4–3 (4:3)
INPUT A
16–9 (16:9)
INPUT B
26 Audio RGB/COMPO. terminals [AUDIO RGB/
COMPO. IN/OUT]
Note:
Input (IN) and output (OUT) terminals for the audio signals
corresponding to the RGB/COMPO. terminals e. The
output terminal is bridge-connected.
● Also refer to BASIC CONNECTION EXAMPLE on
pages 13 and 14.
IN
: Audio signal input terminal
28
29
OUT : Bridge-connected audio signal output terminal
AC Inlet [AC IN]
Power input connector. Connect the provided AC power
cord o to an AC outlet (120 V AC, 50/60 Hz).
Notes:
● For corresponding video signals, use the RGB/COMPO.
terminals e.
Power cord
Connects the provided power cord (120 V AC, 50/60 Hz)
to the AC IN connector.
● Also refer to BASIC CONNECTION EXAMPLE
on page 14.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO HANDLE BASIC
OPERATIONS
BASIC OPERATION
STATUS indication
(PAL or NTSC)
1. Press the POWER switch to turn on the power.
PAL
gON : Power turns ON. (Power indicator: lit)
GOFF : Power turns OFF. (Power indicator: unlit)
ON
OFF
POWER
2. Press the INPUT SELECT button to choose input.
Select video/audio signals input to terminals on the rear
panel. The selected INPUT SELECT indicator lights in green.
INPUT
SELECT
button
Terminals on the rear panel
B
A
RGB/
COMPO.
Y/ C
VIDEO
VIDEO
About the STATUS indication
Video signal input
Audio signal input
INPUT SELECT
● With the COLOR SYSTEM setting set
to AUTO mode, when you turn on the
power or select inputs, the color
1 Input A
(VIDEO)
VIDEO A terminal
AUDIO A terminal
system indication appears for about
3 seconds on the screen while PAL or
NTSC signals are being detected.
It does not appear when receiving a
B/W signal or when no signal is input.
Refer to page 8 for more information
about COLOR SYSTEM setting and
page 10 for more information about
STATUS indication setting.
2 Input B
VIDEO B terminal
(VIDEO)
AUDIO B terminal
3 Input B
(Y/C)
VIDEO B (Y/C) terminal
4 Input
RGB/
COMPO.
RGB/COMPO. terminal
(RGB/Y, B-Y, R-Y)
AUDIO RGB/COMPO.
terminal
* RGB or COMPONENT signals can be selected in the <MENU> screen.
3. Press the VOLUME/SELECT button to adjust the
speaker volume.
00 ~ 50
Press this button to display the speaker volume level on the
–
+
screen.
+ : The Built-in speaker volume is increased. (00 = 50)
– : The Built-in speaker volume is decreased. (50 = 00)
* Screen indication will disappear about 10 seconds after
operating.
VOLUME/SELECT
VOLUME
:
20
+
–
PICTURE ADJUSTMENT
1. Press select button corresponding to the item you
want to adjust.
–40 ~ +40
The item you select is displayed on the screen.
1 PHASE (
2 CHROMA (
3 BRIGHT (
)
: Phase control
: Chroma control
: Brightness control
)
)
PHASE CHROMA BRIGHT CONTRAST
4 CONTRAST ( ) : Contrast control
PHASE
:
00
2. Adjust with the VOLUME/SELECT button.
+
–
–
+
VOLUME/SELECT button
Items
Notes:
–
+
VOLUME/SELECT
● Phase control is effective only in the
NTSC color system mode.
PHASE
(Phase)
reddish
greenish
● Chroma control is not effective when
receiving B/W or when no signal is
input. (Except when a component
signal is input.)
● When CHROMA is adjusted to “– 40,”
the picture becomes less colorful.
● "NO EFFECT" is displayed (for about
3 seconds) when your selected
function has no effect.
CHROMA
(Chroma)
lighter
darker
lower
deeper
brighter
higher
BRIGHT
(Brightness)
CONTRAST
(Contrast)
* Screen indication will disappear about 10 seconds after operating.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE MENU FUNCTIONS
DISPLAY AND SELECTION IN THE <MENU>
SCREEN MODE (SETTING)
<MENU> screen
You can set the following menu items.
Set them depending on your needs.
1
< MENU >
‰ SHARPNESS
COLOR TEMP.
COLOR SYSTEM
ASPECT RATIO
RGB/COMPONENT
COMPO. LEVEL
BLUE CHECK
:
00
• SHARPNESS
• COLOR TEMP.
• COLOR SYSTEM
• ASPECT RATIO
• RGB/COMPONENT
• COMPO. LEVEL
• BLUE CHECK
: 6500
:
: 4–3
:
:
:
AUTO
RGB
00
OFF
1. Press the MENU button.
3
4
2
The <MENU> screen is displayed.
* The screen automatically disappears when no operation is
performed after about 5 minutes.
EXIT
MENU
2. Press the PHASE (
to select MENU items.
) or CHROMA (
) button
–
+
PHASE CHROMA BRIGHT CONTRAST
MENU
VOLUME/SELECT
A selection mark ( ) is put next to the selected item.
3
<Front panel button>
Front panel
button
Function
displayed
PHASE CHROMA
SHARPNESS
Contents
1 Selection mark (
3
): Indicates the
COLOR TEMP.
COLOR SYSTEM
ASPECT RATIO
RGB/COMPONENT
COMPO. LEVEL
BLUE CHECK
PHASE (
)
∞
5
Forward selection mark (
3)
menu item you select.
2 Menu item: Menu items you can
select.
CHROMA (
)
Reverse selection mark (3)
3 Setting display: Indicates the current
settings (value).
4 Function display: The functions of
the front panel buttons (7 buttons on
the left) correspond to the function
displayed.
3. Press the VOLUME/SELECT button to set.
Function
–
+
Front panel
button
Function
displayed
Contents
displayed
Contents
∞
5
–
Forward the menu item.
Reverse the menu item.
VOLUME/
SELECT (+)
+
3
–
Increase (to max. value)
Forward the setting value
Decrease (to min. value)
Reverse the setting value
VOLUME/SELECT
Lower the adjustment
value. (to the minimum)
VOLUME/
SELECT (–)
2
+
Raise the adjustment
value. (to the maximum)
Menu items
Purpose
Setting range
3
2
Forward the setting value.
Reverse the setting value.
Exits the <MENU> screen.
00
+1
+39
+40
SHARPNESS
Picture sharpness
Color temperature of
white balance
9300
6500
COLOR TEMP.
EXIT
COLOR
SYSTEM
AUTO
NTSC
AUTO
PAL
Color system
Aspect ratio
Notes:
4 – 3
RGB
16 – 9
ASPECT RATIO
● When the screen aspect ratio is set to
16 - 9 (16:9) in ASPECT RATIO, the
picture will be vertically reduced.
COMPO.
Input RGB/COMPO. signal
system
RGB/COMPONENT
● When REMOTE is displayed in the
ASPECT RATIO or RGB COMPONENT
status, it is not possible to set these items
because ASPECT REMOTE or INPUT
REMOTE in the <SET-UP MENU> is set to
valid. Use the external control function or
set ASPECT REMOTE or INPUT REMOTE
to invalid (OFF) to make setting possible.
● The BLUE CHECK function is not
memorized. After the power is turned off
and on again, BLUE CHECK is automati-
cally set to OFF. Refer to page 9 for more
information about the BLUE CHECK
function.
● When selecting COMPONENT, adjust
CHROMA GAIN (COLOR) in the COMPO.
LEVEL item first, then input a standard
signal from the device used with the
monitor and adjust CHROMA GAIN with
BLUE CHECK. Refer to page 9 for more
information about initializing COMPO.
LEVEL.
+01
+9
+10
–40
COMPO. LEVEL
BLUE CHECK
Component level
0
–01
–39
OFF
ON
Blue check ON/OFF
4. If you want to set the other menu items, repeat
procedures 2 and 3.
5. Press the MENU button to quit.
Front panel
button
Function
displayed
Contents
MENU
Quit (or Release) the <MENU>
screen
MENU
EXIT
8
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the BLUE CHECK function
Input the standard color-bar signal for your TV system and display it on the screen. When the BLUE CHECK function is ON, the
red and green signals are cut and only the blue signal is displayed. The BLUE CHECK function adjusts and checks CHROMA
(COLOR) GAIN and PHASE.
Make sure that COMPO. LEVEL has been initialized when a component signal is input.
[Procedure]
1. Input the standard color-bar signal for your TV system and display it on the screen.
2. Set the BLUE CHECK function in the <MENU> screen to ON and then press the
MENU button to quit the <MENU> screen.
3. Press the CHROMA button to adjust the chroma so that the blue bars on the left and
right sides of the screen have the same brightness.
4. (Only when an NTSC signal is input) Press the PHASE button to adjust the phase so
that the two blue bars at the center of the screen have the same brightness.
5. (Only when an NTSC signal is input) Repeat procedures 3 and 4 for the adjustment so
that all four blue bars on the screen have the same brightness.
When the adjustment is complete, set the BLUE CHECK function to OFF.
Note:
● The BLUE CHECK function is not
memorized. After the power is turned
off and on again, BLUE CHECK is
automatically set to OFF.
ⅷ Initializing COMPO. LEVEL (when a component signal is input)
When a component signal is input, be sure to adjust (initialize) the COLOR offset in
COMPO. LEVEL.
[Procedure]
1. Input the standard color-bar signal for your TV system and display it on the screen.
2. Set the BLUE CHECK function in the <MENU> screen to ON.
3. Select COMPO. LEVEL in the <MENU> screen and then adjust it with VOLUME +/–
buttons so that the blue bars on the left and right sides of the screen have the same
brightness.
4. Quit the <MENU> screen with the BLUE CHECK function ON.
5. Make sure that the blue bars on the left and right sides of the screen have the same
brightness.
6. Repeat procedures 3, 4 and 5 for the adjustment so that the blue bars on the left and
right sides of the screen have the same brightness.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE MENU
FUNCTIONS (cont'd)
DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> MODE (SETTING)
<SET-UP MENU> screen
You can set the following set-up menu items.
1
• H. POSITION
• V. POSITION
• WHITE BALANCE
• CONTROL LOCK
• STATUS DISPLAY
• INPUT REMOTE
• ASPECT REMOTE
<SET-UP MENU>
‰ H. POSITION
:
:
00
00
V. POSITION
WHITE BALANCE
CONTROL LOCK
STATUS DISPLAY
INPUT REMOTE
ASPECT REMOTE
: OFF
: ON
: OFF
: OFF
Notes:
● Parameters for H. POSITION and V. POSITION can be set separately depending on
the video input (Input A (VIDEO), Input B (VIDEO), Input B (Y/C) or Input RGB/
COMPO.) selected by the input select buttons on the front panel.
Select the required video input with the input select buttons on the front panel in
advance.
3
4
2
EXIT
● WHITE BALANCE can be set individually at 6500 or 9300 for the color temperature
value.
Set COLOR TEMP. to the value 6500 or 9300 in the <MENU> screen in advance.
–
+
PHASE CHROMA BRIGHT CONTRAST
MENU
VOLUME/SELECT
<Front panel button>
1. While pressing the MENU button, press the
1 Selection mark (
3
): Indicates the
PHASE (
) button.
menu item you select.
2 Menu item: Menu items you can
select.
The <SET-UP MENU> screen is displayed.
* The screen automatically disappears when no operation is
performed after about 5 minutes.
3 Setting display: Indicates the current
settings (value).
PHASE
MENU
4 Function display: The functions of
the front panel buttons (7 buttons on
the left) correspond to the function
displayed.
2. Press the PHASE (
) or CHROMA (
) button
to select the desired menu item.
A selection mark ( ) is put next to the selected item.
3
Function
Contents
displayed
Front panel
button
Function
displayed
PHASE CHROMA
Contents
∞
5
–
Forward the menu item.
Reverse the menu item.
H. POSITION
V. POSITION
PHASE (
)
∞
5
Forward selection mark (
3
3
)
CHROMA (
)
Reverse selection mark (
)
Lower the adjustment
value. (to the minimum)
WHITE BALANCE
CONTROL LOCK
STATUS DISPLAY
INPUT REMOTE
ASPECT REMOTE
+
Raise the adjustment
value. (to the maximum)
3
2
Forward the setting value.
Reverse the setting value.
Exit the <SET-UP MENU>
screen. (release)
EXIT
DRV
3. Press the VOLUME/SELECT button to set.
Selects DRV adjustment.
Front panel
button
Function
displayed
–
+
Contents
Selects CUT OFF
adjustment.
CUTO
+
Increase (to max. value)
Forward the setting value
VOLUME/SELECT
VOLUME/
SELECT (+)
R
G
B
Adjusts red signal level.
Adjusts green signal level.
Adjusts blue signal level.
3
CUTO
–
Selects CUT OFF setting screen
Decrease (to min. value)
VOLUME/
SELECT (–)
Turns the ON-SCREEN
display on or off. (This
function is effective only in
the DRIVE or CUT OFF
adjustment mode.)
2
DRV
Reverse the setting value
Selects DRIVE setting screen
DISP
Notes:
● For the WHITE BALANCE setting, select the CUT OFF or
DRIVE setting screen, then select the buttons (PHASE/
CHROMA/BRIGHT) corresponding to the function indicated
(R/G/B).
● Press the EXIT (MENU) button to return to the <SET-UP
MENU> screen.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Set-up menu items
Purpose
Settings
H. POSITION
Adjusts the horizontal position of
the screen (+ : Horizontal position
shifts to the right/–: Horizontal
position shifts to the left)
–05 –04 •••••• –01 00 +01 •••••• +04 +05
V. POSITION
Adjusts the vertical position on the
screen (+: Vertical position moves
down/–: Vertical position moves up)
–05 –04 •••••• –01 00 +01 •••••• +04 +05
WHITE BALANCE
Adjusts the white balance
Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment.
Screen setting is changed to the selected setting mode.
Select R/G/B buttons corresponding to the function display
to adjust.
DRIVE
R.DRIVE
B.DRIVE
Adjusts red level
–20 –19 ••••• –01 00 +01 ••••• +19 +20
–20 –19 ••••• –01 00 +01 ••••• +19 +20
–20 –19 ••••• –01 00 +01 ••••• +19 +20
–20 –19 ••••• –01 00 +01 ••••• +19 +20
–20 –19 ••••• –01 00 +01 ••••• +19 +20
Adjusts blue level
Adjusts red cut off
Adjusts green cut off
Adjusts blue cut off
CUT OFF R. CUT OFF
G. CUT OFF
B. CUT OFF
CONTROL LOCK
Sets the operation buttons on the
front panel to control lock mode
OFF
ON
ON
OFF
STATUS DISPLAY
INPUT REMOTE
ASPECT REMOTE
Sets the status display of the color
system
Sets external control of input
selection (INPUT A/B)
OFF
OFF
A/B
ON
Sets external control of the aspect
ratio
4. To set the other set-up menu items, repeat the
procedures 2 and 3.
Notes:
● When the CONTROL LOCK function is
set to ON, pressing operation buttons
on the front panel will display the
message "CONTROL LOCK ON!" on
the screen for about 3 seconds.
● The CONTROL LOCK function is
maintained even when the power is
turned off.
5. Press the MENU button to quit.
Front panel Function
Contents
button
displayed
● To turn off the CONTROL LOCK
function, while holding the MENU button
press the PHASE button. Then set the
CONTROL LOCK function to OFF.
● Even when the CONTROL LOCK
function is set to ON, the following
operations are available:
MENU
Quit (or Release) the <MENU>
screen
MENU
EXIT
– Power Switch operation
– Volume control with the VOLUME/
SELECT buttons
– External control when INPUT
REMOTE or ASPECT REMOTE is
valid
– Display or disappear of the <SET-UP
MENU> screen.
● The STATUS DISPLAY function can be
set to display (ON) or not display (OFF)
the present color system when the
power is turned on or the input signal is
changed. Refer to page 7 for more
information.
● When the INPUT REMOTE function is
valid (A/B), pressing the Input A, Input B
or Input RGB/COMPO. buttons will
display the message "REMOTE ON!" on
the screen for about 3 seconds.
● The INPUT REMOTE function is valid
(A/B) after quitting the <SET-UP
MENU> screen.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO INITIALIZE THE
SETTING
SCREEN DISPLAY AND SELECTIONS IN THE
<SET-UP MENU> RESET MODE
You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and
the volume level to their factory-set (initial) values.
<SET-UP MENU> RESET screen
<SET–UP MENU> RESET
Are you sure ?
“Yes” then <CONTRAST>
1. Press the Power ( ) Switch to turn the power
OFF (G).
“No”
then <+> or <–>
ON
OFF
POWER
2. While pressing both MENU button and PHASE (
)
Initial settings
button, press the Power ( ) switch to turn the power
Initialization
(setting)
Functions (Items)
ON (g).
SHARPNESS
00
The <SET-UP MENU> RESET screen is displayed.
COLOR TEMP.
COLOR SYSTEM
ASPECT RATIO
6500
AUTO
4–3
* The screen automatically disappears when no operation
is performed after about 5 minutes.
ON
OFF
POWER
PHASE
MENU
RGB/COMPONENT RGB
Note:
COMPO. LEVEL
BLUE CHECK
00
OFF
● The <SET-UP MENU> RESET screen will not be
displayed if the MENU or PHASE buttons are pressed
for a very short time. Keep pressing them until the
display screen appears.
H. POSITION
V. POSITION
WHITE BALANCE
00
00
R. CUT OFF 00
G. CUT OFF 00
B. CUT OFF 00
3. Setting
R. DRIVE
B. DRIVE
00
00
ⅷ Initialization is required.
CONTROL LOCK OFF
STATUS DISPLAY ON
Press the CONTRAST ( ) button.
* Initialization is completed, and the <SET-UP MENU>
RESET screen disappears.
INPUT REMOTE
OFF
ASPECT REMOTE OFF
CONTRAST
PHASE
00
00
00
00
CHROMA
CONTRAST
BRIGHT
ⅷ Initialization is not required.
Press the VOLUME/SELECT [+] or [–] button.
* Initialization is aborted, and the <SET-UP MENU>
RESET screen disappears.
–
+
VOLUME
20
VOLUME/SELECT
12
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC CONNECTION EXAMPLE
Notes:
• Before connecting your system, make sure that all units are turned off.
• The illustration below shows some examples of different connections. Terminal connections may differ depending on the
component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting.
• Each pair of input (IN) and output (OUT) terminals are bridge-connected.
• If you’re not connecting any equipment to a bridged output (OUT) terminal, be sure not to connect any other cables to the bridged output (OUT)
terminal as this will cause the terminating resistance switch to open (auto terminate function).
• When making a bridge connection, connect the input (IN) and output (OUT) terminals on the monitor to separate video components.
(For example, if both terminals are connected to the same VCR, resonance may occur except during playback. This is caused by the same video
signal "looping" between the VCRs, and is not a malfunction.)
• Select the video input (INPUT A (VIDEO), INPUT B (VIDEO), INPUT B (Y/C) or INPUT RGB/COMPO.) with the INPUT SELECT buttons on the
front panel.
• The ASPECT RATIO or INPUT A/B settings can be controlled via the REMOTE terminal by setting ASPECT REMOTE or INPUT REMOTE in the
<SET-UP MENU> screen to valid. (Refer to pages 10 and 11.)
Ⅵ VIDEO A Connection Example (Select Input A (VIDEO))
IN
OUT
A
Video
Video
(Video signal cable)
(Video signal cable)
Video Camera
IN
OUT
Video
(Video signal cable)
VIDEO
B
IN
Y/C
OUT
Y/G
VCR
Video Monitor
Audio
B-Y
/B
(Audio signal cable)
RGB /
COMPO.
RGB
SYNC
R-Y
/R
Audio
VCR
IN
IN
OUT
A
(Audio signal cable)
Video Monitor
Audio
OUT
AUDIO
B
(Audio signal cable)
Ⅵ VIDEO B (VIDEO) Connection
RGB /
IN
OUT
COMPO.
Example (Select Input B (VIDEO))
INPUT
A/B
ASPECT
REMOTE
Video
Video Camera
(Video signal cable)
VCR
Video Monitor
Audio
(Audio signal cable)
Video Monitor
VCR
External control switch
External control switch
REMOTE
REMOTE
open circuit (open)
open circuit (open)
(Remote cable)
(Remote cable)
RCA pin
RCA pin
closed circuit (short)
closed circuit (short)
External control switch
External control
External control switch
External control
functions
Open circuit Closed circuit
Open circuit Closed circuit
functions
(open)
(short)
(open)
(short)
INPUT A/B
INPUT A
INPUT B
ASPECT RATIO
4–3 (4:3)
16–9 (16:9)
: Signal Flow
13
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC CONNECTION EXAMPLE (cont'd)
Ⅵ VIDEO B (Y/C) Connection Example (Select Input B (Y/C))
IN
OUT
A
IN
OUT
VIDEO
Video Camera
Y/C (S-video)
B
IN
(Y/C (S-video) signal cable)
Y/C
OUT
Y/G
Y/C (S-video)
VCR
(Y/C (S-video) signal cable)
B-Y
/B
Video Monitor
RGB /
COMPO.
RGB
SYNC
R-Y
/R
IN
IN
OUT
A
Video Monitor
Audio
VCR
Audio
OUT
AUDIO
B
(Audio signal cable)
(Audio signal cable)
RGB /
IN
OUT
COMPO.
External control switch
INPUT
A/B
ASPECT
REMOTE
open circuit (open)
REMOTE
(Remote cable)
RCA pin
closed circuit (short)
External control switch
External control
functions
Open circuit Closed circuit
(open)
(short)
: Signal Flow
ASPECT RATIO
4–3 (4:3)
16–9 (16:9)
Ⅵ RGB/COMPO. Connection Example
IN
IN
OUT
OUT
A
VIDEO
B
IN
B/B–Y
Y/C
(Signal cable)
OUT
Device
outputting
analog RGB
signal or Y/
G/Y
(Signal cable)
Y/G
B-Y
/B
R/R–Y
RGB /
COMPO.
(Signal cable)
B-Y/R-Y
Other audio
device (e.g.
audio amplifier)
RGB
SYNC
R-Y
/R
component
RGB SYNC
signal
(Signal cable)
(RGB only)
IN
IN
OUT
OUT
A
Audio
AUDIO
B
(Audio signal cable)
Audio
RGB /
COMPO.
IN
OUT
(Audio signal cable)
INPUT
A/B
ASPECT
REMOTE
External control switch
REMOTE
(Remote cable)
open circuit (open)
Note:
RCA pin
● RGB or COMPONENT signals can be selected in the
closed circuit (short)
<MENU> screen.
External control switch
External control
functions
Open circuit Closed circuit
(open)
(short)
ASPECT RATIO
4–3 (4:3)
16–9 (16:9)
: Signal Flow
14
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Solutions to common problems related to your monitor are described here. If none of the solutions presented here
solves the problem, unplug the monitor and consult a JVC-authorised dealer or service center for assistance.
Problems
Points to be checked
Measures (Remedy)
Firmly insert the power plug.
No power supply.
Is the power plug loosened or disconnected?
No picture with the
power on.
Is the video signal output from the connected
component?
Set the connected component correctly.
Is the input signal selected properly?
Select the required video signal input with the
Input select button. (See page 7.)
Is the video cable disconnected?
Connect the video signal cable firmly.
(See pages 13 and 14.)
No sound.
Is the audio signal output from the connected
component?
Set the connected component correctly.
Is the volume output set to minimum?
Adjust the speaker volume with the VOLUME/
SELECT button. (See page 7.)
Is the audio cable disconnected?
Connect the audio signal cable firmly.
(See pages 13 and 14.)
Shaking picture.
Is the monitor close to a device generating a
strong magnetic field?
Move the device away from the monitor until the
picture stabilizes.
No colors, wrong
color, or dark picture.
Is the color system selected properly?
Set COLOR SYSTEM in the <MENU> screen to
AUTO. (See page 8.)
Has the picture control setting (CONTRAST,
BRIGHT CHROMA or PHASE) been changed?
Set each picture control to the standard setting.
(See page 7.)
Is the RGB/COMPONENT signal selected
properly?
Check the RGB/COMPONENT setting in the
<MENU> screen. (See page 8.)
Unnatural, irregularly Is the monitor close to a speaker, magnet or any Move the device away from the monitor and turn
colored, or distorted
picture.
other device generating a strong magnetic field? the monitor’s power off. Wait at least 30 minutes,
then turn the power on again.
Dark stripes appear
at the top and bottom
of the screen, picture
vertically squeezed.
Is the aspect ratio set to 16:9?
Set ASPECT RATIO in the <MENU> screen to
[4 : 3 (4 – 3)]. (See page 8.)
When controlling externally, ASPECT RATIO
should be set to [4 : 3 (4 – 3)].
(See pages 13 and 14.)
The overall picture
size is too small.
Has the UNDER SCAN button been pressed so
the UNDER SCAN indicator lights?
Press the UNDER SCAN button to turn off the
indicator. (See page 4.)
Function buttons on
Has control of the buttons been locked? (Has
Set CONTROL LOCK in the <SET-UP MENU>
the front panel do not the CONTROL LOCK function been set to ON?) screen to OFF. (See pages 10 and 11.)
function.
The INPUT SELECT
buttons do not
function.
Is input selection under external control? (Has
the INPUT REMOTE function been set to valid
(A/B)?)
Set INPUT REMOTE in the <SET-UP MENU>
screen to OFF. (See pages 10 and 11.)
The following are not malfunctions:
● When a bright still image (such as a white cloth) is displayed for a long period, it may appear to be colored. This is due to the
structure of the cathode ray tube and will be deleted when another image is displayed.
● You experience a mild electric shock when you touch the picture tube. This phenomenon is due to a normal buildup of static
electricity on the CRT and is not harmful.
● The monitor emits a strange sound when the room temperature changes suddenly. This is only a problem if an abnormality
appears on the screen as well.
● If two or more monitors are operated next to each other, their images may shake or be distorted. This phenomenon is due to
mutual interference; it is not a malfunction. Move the monitors away from each other until the interference disappears or turn the
power off on any monitor that is not being used.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Ⅲ Audio power output
Ⅲ Built-in speaker
: 1 W (monaural)
: 3-1/8” (8 cm) round x 1
impedance of 8 Ω
Ⅲ Type
: Color video monitor
: PAL, NTSC (3.58)
Ⅲ Color system
Ⅲ Picture tube
: 16” measured diagonally,
flat-square type,
Ⅲ Environmental
conditions
: Operation temperature:
0 °C – 40 °C (32 °F – 104 °F)
Operation humidity:
90° deflection, in-line gun,
vertical line trio type (phosphor
stripe pitch 0.42 mm)
20 % – 80 % (non-condensing)
: 120 V AC, 50 Hz / 60 Hz
: 1.2 A (120 V AC)
Ⅲ Effective screen size : Width
13” (330 mm)
9-7/8” (250 mm)
Ⅲ Power requirements
Ⅲ Power consumption
Ⅲ Dimensions
Height
Diagonal 16-1/4” (410 mm)
: (H) 15.734 kHz (NTSC)
15.625 kHz (PAL)
: Width
Height
15-5/8” (395 mm)
13-1/4” (334 mm)
Ⅲ Scanning frequency
Depth 16-5/8” (420.5 mm)
: 37.9 lbs (17.2 kg)
(V) 59.94 Hz (NTSC)
50 Hz (PAL)
Ⅲ Weight
Ⅲ Accessory
: AC power cord [7.9 ft (2.4 m)] x 1
Ⅲ Horizontal resolution : 550 TV lines or more
(Y/C input mode)
Ⅲ Input terminals
VIDEO A : Composite video:
1 line, BNC connector x 2,
1 V (p-p), 75 Ω, negative sync
(bridge connection possible,
auto termination)
VIDEO B : Composite video:
1 line, BNC connector x 2,
1 V (p-p), 75 Ω, negative sync
(bridge connection possible,
auto termination)
Y/C-separated:
1 line, mini-DIN 4-pin
connector x 2
Y: 1.0 V (p-p), 75 Ω
C(BURST): 0.286 V (p-p),
75 Ω (NTSC),0.3 V (p-p),
75 Ω (PAL)
(bridge connection possible,
auto termination)
RGB/COMPO. : Analog RGB:
1 line, BNC connector x 3
R, G, B: 0.7 V (p-p), 75 Ω
RGB sync:
0.3 V (p-p) – 4 V (p-p), 75 Ω
Y, R-Y, B-Y component:
1 line
Y:1V (p-p), 75 Ω, negative sync
R-Y, B-Y: 0.7 V (p-p), 75 Ω
AUDIO A : 1 line (monaural), RCA pin x 2
0.5 V (rms), high-impedance
(bridge connection possible)
AUDIO B : 1 line (monaural), RCA pin x 2
0.5 V (rms), high-impedance
(bridge connection possible)
AUDIO RGB/COMPO. : 1 line (monaural), RCA pin x 2,
0.5 V (rms), high-impedance
(bridge connection possible)
REMOTE INPUT A/B : 1 line, RCA pin x 1
REMOTE ASPECT : 1 line, RCA pin x 1
* Illustrations used in this manual are for explanatory purposes only. The appearance of the actual product may differ slightly.
* Dimensions and weight are approximate.
* E. & O. E. Design and specifications subject to change without notice.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Ⅵ Dimensions
Unit : inch (mm)
< Side View >
< Front View >
16-5/8 (420.5)
16-1/8 (407.2)
15-5/8 (395)
*
*
13-1/4 (336.3)
UNDER
SCAN
B
A
RGB/
COMPO.
–
+
Y/ C
VIDEO
VIDEO
ON
OFF
INPUT SELECT
TM-1650SU
PHASE CHROMA BRIGHT CONTRAST
MENU
VOLUME/SELECT
POWER
2-1/4
(55)
3/16 (3.5)
12-1/8 (306.5)
13-5/8 (346)
* Asterisks ( ) are used to indicate front panel
*
dimensions.
Ⅵ Y/C (Mini DIN 4 pin) terminal
specification
2
4
Pin No.
Signal
GND (Y)
GND (C)
Y
IN
1
2
3
4
1
2
3
Y/C
4
OUT
1
3
C
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
JVC PROFESSIONAL PRODUCTS COMPANY
DIVISION OF US JVC CORP.
1700 Vallery Road Wayne, NJ07470
JVC CANADA INC.
21 Finchdene Square, Scarborough Ontario M1X 1A7
LCT0371-002B-H
0700-Tu-V-JMT
2000 VICTOR COMPANY OF JAPAN, LIMITED
©
Download from Www.Somanuals.com. All Manuals Search And Download.
|