LCD Monitor
GD-32X1U
INSTRUCTIONS
LCD Monitor ◆ INSTRUCTIONS
LCT2576-001A-H
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock.
Do not remove cover (or back). No user
serviceable parts inside. Refer servicing to
qualified service personnel.
The lightning flash with arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES
REGARDING THE USE OF THIS UNIT.
1. Operate only from the power source specified on the unit.
2. Avoid damaging the AC plug and power cord.
3. Avoid improper installation and never position the unit where good
ventilation is unattainable.
4. Do not allow objects or liquid into the cabinet openings.
5. In the event of trouble, unplug the unit and call a service technician. Do
not attempt to repair it yourself or remove the rear cover.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Changes or modifications not approved by JVC could void the warranty.
●When you don’t use this monitor for a long period of time, be sure to
disconnect both the power plug from the AC outlet and antenna for your
safety.
●To prevent electric shock do not use this polarized plug with an extension
cord, receptacle or other outlet unless the blades can be fully inserted to
prevent blade exposure.
Do not attempt to service the product yourself
Caution
To prevent electrical shock, do not open the cabinet.
There are no user serviceable parts inside.
Please refer to qualified service personnel for repairs.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
9) Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long
periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15) Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
16) Place the monitor on a stable, flat surface. Failure to do so can result in
the monitor falling, causing injury.
17) DO NOT allow young children to play around or on the monitor. Do not
hang from the monitor. Failure to do so can result in the monitor falling,
causing injury.
18) To prevent electrical shock, do not open cover or take apart the AC
adapter. Repair should be done by service personnel only.
19) Do not let the AC adapter hang down while using.
20) Do not cover or wrap the AC adapter with clothes or sheets or the like.
21) Leave space around the AC adapter to prevent overheating.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
22) Use of power cords or AC adapters other than those provided may cause
fire or malfunction.
23) DO NOT allow young children to play with the plastic bag that came
with the monitor when you unpacked it. Failure to do so can result in
suffocation, causing injury.
24) Avoid improper installation and never position the unit where good
ventilation is impossible. When installing this monitor, distance
recommendations must be maintained between the set and the wall, as
well as inside a tightly enclosed area or piece of furniture. Keep to the
minimum distance guidelines shown for safe operation.
200 mm
(7 7/8’’)
200 mm (7 7/8’’)
50 mm
(2’’)
150 mm
(5 7/8’’)
150 mm
(5 7/8’’)
50 mm (2’’)
25) Cautions for installation
●Do not tilt the monitor towards the left or right, or towards the back.
●Install the monitor in a corner on the floor so as to keep cords out of the
way.
●The monitor will generate a slight amount of heat during operation.
Ensure that sufficient space is available around the monitor to allow
satisfactory cooling.
●Have two people remove the monitor from the box with the screen
facing away from you. It’s possible your clothing, (such as a belt buckle
or button) may scratch the front of the monitor. Do the same when
moving the monitor to another location.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
26) When installing the monitor on the wall, ask your dealer to install.
27) Make enough room for inserting and removing the power plug. Place
the monitor as close to the outlet as possible. The main power supply
for this monitor is controlled by inserting or removing the power plug.
28) Batteries shall not be exposed to excessive heat such as sunshine, fire or
the like.
29) When this monitor is connected to the wall outlet, it is always on
standby even when all the LED lamps are not lit. To shut down the
monitor, unplug the monitor from the wall outlet.
To avoid burn-in
Do not display a still picture for an extended period of time. Doing so may
cause a faint image to remain on your screen.
Warning
To prevent an accidental fall
To prevent injury, the monitor must be fixed to the floor/cabinet. Use
bolts and nuts or screws (ø 4 mm, sold separately) to fix the monitor to
the floor/cabinet utilizing the holes of the stand.
Bolt/screw
(sold separately)
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Carrying the monitor
When carrying the monitor, hold it by the sides
as illustrated.
IMPORTANT RECYCLING INFORMATION
This product has a fluorescent lamp that contains mercury. Disposal of
these materials may be regulated in your community due to environmental
considerations. For disposal or recycling information, please contact your
eiae.org
FCC Notice:
Caution: Changes or modifications not expressly approved by party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
› More precise adjustment of picture quality with a
wide range of adjustment properties
➔ page A-2
› Enjoy SLR digital camera photographs ➔ page A-11
› Slim cabinet provides you with greater freedom of
choice for installation
› Quick response making video games more exiting
— Game Mode
➔ page A-5
› Operating HDMI devices from the TV remote
controller — HDMI CEC compatible
➔ page 11
02
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04
Included items
04
04
05
05
06
08
08
Inserting batteries into the remote control
Attaching the speaker unit
Installation
Connecting external devices
Connecting the power cable/AC adapter
Initial settings
Parts identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09
Controlling HDMI devices. . . . . . . . . . . . . . . . . . . . . . . . . 11
Changing the settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Picture
Sound
Setup
HDMI
13
25
27
34
Viewing photographs on SD card/
USB device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
External Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Technical information
Adjust the picture to your needs . . . . . . . . . . . . . . . . . A-2
Set up the monitor for your PC . . . . . . . . . . . . . . . . . . . A-10
Enjoy SLR digital camera photographs . . . . . . . . . . . A-11
Menu index by task. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12
You can search for picture/sound menu items from the
adjustment you want to make, and quickly find the page
containing detailed information.
03
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Included items
●Main unit (monitor)
●Video cable (D-sub 15 pin / RCA)
●Audio cable (3.5 mm stereo mini /
RCA)
●Stand
●RS-232C extension cable
●Video cable (D-sub 15 pin)
●VESA bracket
●M4 x 8 screws (for the stand or
VESA bracket, × 4)
●Power cable
●AC adapter
●M3 x 12 screw (for the HDMI
cover, × 1)
●Remote control unit, AAA size
batteries
●HDMI cover, AC terminal cover,
D-sub cover, hook hole covers
(× 2), bottom covers (× 2)
●Instructions (this book), startup
sheet, other printed material
Inserting batteries into the remote control
When replacing the batteries
If this symbol is shown,
it is only valid in the
European Union
To avoid short-circuit, place the minus
end of the batteries first.
● Batteries shall not be exposed to
excessive heat such as direct sunshine, fire or the like.
● Read the precautions on the battery.
● The batteries last about 6 to 12 months on regular usage.
● The included batteries are supplied for operation check and may last shorter.
04
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the covers
● Attach the HDMI cover (3) and AC terminal cover (5) after connections have
been made. Fix the HDMI cover to the unit using the supplied screw. Break off
the bottom right of the HDMI cover when you want to extend the HDMI cable
backwards.
● Attach the D-sub cover (1), hook hole covers (2) and bottom covers (4) when
the respective openings are not in use.
1
2
3
1
2
2
4
5
3
4
4
5
Attaching the speaker unit
Connect the speaker unit (TS-C32SPG: sold separately) to the monitor if
you do not connect any other external audio output device.
● Set the volume to the minimum level and turn the power off before you attach
the speaker unit to the monitor.
● Refer to the startup sheet for details.
Installation
Install the unit properly referring to the cautions from pages ii to vii.
● Attach the stand (supplied) to stand the monitor. Refer to the startup sheet for
details.
● Attach the VESA bracket using the supplied screws when installing the monitor
on the wall. Refer to the startup sheet for details. Consult a specialist when you
install the monitor on the wall.
05
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting external devices
To connect a device with component terminals
ø 3.5 mm stereo
mini plug
To connect a device with a composite terminal
Green
To connect a computer
To connect a DVI device
To INPUT-1 terminal
To connect an HDMI device
To INPUT-1/INPUT-2
terminals
06
Download from Www.Somanuals.com. All Manuals Search And Download.
● HDMITM (V.1.3, with Deep Color, with x.v.ColorTM, HDMITM CEC Support)
INPUT-3:
D-sub 15 pin
RS-232C
terminal
(➔ page 40)
AUDIO IN terminal :
3.5 mm stereo mini
jack
INPUT-2: HDMITM terminal
INPUT-4 :
SD card slot,
USB type slot
(➔ page 36)
INPUT-1: HDMITM
terminal
A: Video cable (supplied)
B: Audio cable (supplied)
C: Video cable (supplied)
D: RS-232C extension cable (supplied)
a: Component cable (sold separately)
b: Audio cable (sold separately)
c: Video cable (sold separately)
d: VGA cable (sold separately)
e: Audio cable (sold separately)
f: DVI-HDMI cable (sold separately)
g: HDMI cable (sold separately)
● When using the INPUT-3 terminal, set “Input-3 Setting” (➔ page 31) properly
according to the connected device.
● To reduce noise, use a VGA cable with core filters.
● When you connect a DVI device to INPUT-2, only the video signal is played
back, and the sound signal is not.
07
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the power cable/AC Adapter
● Connect AC plug adapter and power cord to the monitor in the order of
numbers below.
● Insert the power terminal firmly until you hear a clicking sound.
AC adapter
Power cable
● Ground the earth plug of the power cable to the earth terminal of the AC
outlet.
Initial settings
When you turn on the monitor for the first time, initial settings start. Select
the menu language and the place of installation.
1 Select the menu language.
1-1 Select “Menu Language” and press
Interactive Plug-in Menu
Previous 2/4
the [OK] button.
1-2 Select from the list the language
you want using the [
Menu Language
English(EU)
English(EU)
English(US)
Suomi
Français(EU)
Français(US)
Deutsch
Set
]
buttons, and press the [OK]
button.
Ελληνιά
Magyar
Next
1-3 Select [Set] and press the [OK]
button.
2 Select the place of installation.
2-1 Select “Place of Installation” and press the [OK] button.
2-2 Select the place of installation using the [
the [OK] button.
] buttons, and press
2-3 Select [Set] and press the [OK] button.
● Whichever place you select in step 2, settings and functions are the same.
● In steps 1-1 and 2-1, you can also select a setting by pressing the [
] buttons.
08
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts identification
Main unit
Remote sensor
Power indicator
Power indicator Lights while the monitor is on.
Remote sensor Aim the remote control here.
Turns the monitor on/off (on standby).
INPUT
MENU
Switches the input.
Opens the setting menu. Functions as the down cursor
key in the menu operations.
Functions as the left cursor key and the right cursor key
in the menu operations.
Turns up the volume. Functions as the OK key in the
menu operations.
+ OK
Turns down the volume. Functions as the BACK key in
the menu operations.
– BACK
09
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
POWER
Turns the monitor on/off (on
standby).
LINK
Opens the photo viewer menu or
the operation window for HDMI
CEC devices. (➔ page 11)
Opens the setup window of HDMI
CEC devices.
OPTION
Opens the setting menu of the
photo viewer (➔ page 38).
Opens the setting menu.
(➔ page 12)
MENU
EXIT
Exits from the menu.
Selects an item.
(Cursor keys)
OK
Confirms your selection.
BACK
ASPECT
BLUE
Goes back to the previous screen.
Changes the aspect. (➔ page 28)
Press accordingly to the on-screen
indications.
RED
GREEN
YELLOW
VOL +/–
MUTING
INPUT 1
INPUT 2
INPUT 3
INPUT 4
Adjusts the volume.
Attenuates the sound.
Switches the input.
● Buttons not mentioned above are equipped for the
operations of a TV tuner.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling HDMI devices
You can control HDMI CEC devices connected to this monitor using the
remote of the monitor.
● This function can be customized in the “HDMI” settings (➔ page 34).
● Devices may not operate or may function differently from described,
depending on the model or the manufacturer.
1 Press the [LINK] button.
Link >Recorder
Device
Input-1
Operation window appears.
Rec.
Rec.Stop
NAVIGATION
Function
2 Select the device to control.
Select the device name under “Device”.
Operation Panel
Speaker
Exit
Monitor
3 Control the selected HDMI device.
● “Rec.” : Starts recording.
Operate
Select
● ”Rec.Stop” : Stops recording.
● “NAVIGATION” : Opens the playback menu of the HDMI device.
● “Function” : Opens the operation menu of the HDMI device.
● “Operation Panel” : Opens the operation panel.
To select the audio output
When an HDMI CEC amplifier is connected to the monitor, you can select
either the monitor or the amplifier as the device to output the sound
signal.
● To output the sound from the amplifier, set “AMP Control” (➔ page 35) to “On”,
and connect the audio output terminals of the player into the amplifier.
1 Press the [LINK] button.
2 Select “Monitor” or “AMP” under “Speaker”.
● “Monitor” : The sound is output from the speakers when you connect the
speaker unit (sold separatery) to the monitor. The volume buttons of the
monitor control the volume of the speakers.
● “AMP” : The sound is output from the amplifier. The volume buttons of the
monitor control the volume of the amplifier.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the settings
Example: to change the setting of “Color Temperature”
1 Open the menu.
Picture
Page 1/3
Memory1
Memory Setting
Load Preset
Tint
0
2 Select “Picture”.
Tint Setting
Color
Contrast
0
0
Contrast Setting
Brightness
Sharpness
0
0
3 Select “Color Temperature”.
● The item currently selected is shown in orange.
4 Select the setting you want.
● When the selected item is followed by an adjustment screen, press the
] buttons to make adjustments.
[
➔ page 13
➔ page 25
➔ page 27
➔ page 34
Picture
Sound
Setup
HDMI
5 Finish the setting.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical information
Adjust the picture to your needs
Set up the monitor for your PC
A-2
A-10
Enjoy SLR digital camera photographs
A-11
Menu index by task
A-12
Show Your True Colors.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust the picture to your
needs
Make picture adjustments according to your needs using the “Picture”
menu.
● You can save six sets (“memories”) of your adjustments.
● You can load a preset into memory and use it as it is, or make your own
adjustment.
To use a preset
1 Open the menu.
Picture
Page 1/3
Memory1
2 Select a memory from
Memory Setting
Load Preset
“ Memory Setting ” in
Tint
Tint Setting
Color
0
“Picture”.
● When you select one of the
memory, its settings are applied
to the picture.
0
0
Contrast
Contrast Setting
Brightness
Sharpness
0
0
3 Select “Load Preset”,
select one of the preset settings, and press “Load”.
● See page A-4 for the detail of presets.
● In the initial setting, all the six memories are set to the preset of “Monitor”.
A-2
Download from Www.Somanuals.com. All Manuals Search And Download.
This monitor features rich menus for picture control, in addition to 10 pre-
installed sets of picture settings carefully prepared by JVC to suit various
types of video content and viewing environment.
Enjoy controlling appearance of pictures using the “Picture” menu, and
create your own picture settings.
To customize the settings
You can create your own set of picture settings by arranging the settings of
a preset. Storing several sets of settings helps you to enjoy a picture in the
taste you like according to the viewing environment and characteristics of
the source.
1 Open the menu.
2 Select the memory you want to adjust from “ Memory
Setting ” in “Picture”.
3 Adjust items in “Picture”.
➔ See pages 14 and later for the detail of menu items.
● It is recommended to use the preset of “Standard” as the base of your
adjustment.
● Adjustments are stored into the selected memory as you change the settings.
● To make another set of picture settings, select another memory in step 2
above and start adjustments.
To reset the settings
If you do not like your current adjustments, load either of the preset settings
into the memory which you want to reset. Settings of the selected memory
are overwritten by those of the loaded preset setting.
1 Open the menu.
2 Select the memory you want to reset from “ Memory Setting ” in
“Picture”.
3 Select “Load Preset”, select one of the preset settings, and press
“Load”.
A-3
Download from Www.Somanuals.com. All Manuals Search And Download.
●Characteristics of the 10 presets
Dynamic
Makes pictures colorful and
bright, suitable for watching in a
well-light room.
Standard
The most standard setting.
Theater
Suitable for watching cinemas in
a dark room.
Monitor
Does not apply color
adjustments or noise reductions.
Input video signals are displayed
as they are. Suitable for
monitoring purpose.
Photo Pro
Suitable for watching still
pictures of SLR digital cameras.
A-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Game
Gives priority to the response
time for picture movement.
Suitable for game consoles.
Signage
Suitable for digital signage use in
market, shops or hotels.
HD
CCTV
Suitable for monitoring CCTVs
in HD format.
CCTV SD
Suitable for monitoring CCTVs
in SD format.
Option
Suitable for displaying medical
images including x-ray pictures.
● This setting is only for approximate
presentation and does not conform
to any official standard of medical
imaging.
➔ See the following pages for the setting values of each preset.
A-5
Download from Www.Somanuals.com. All Manuals Search And Download.
●Setting values of each preset
● The settings are subject to change for amelioration.
Dynamic Standard Theater
Monitor
Tint
0
0
0
0
Tint Setting
BY Gain
BY/RY Angle
Color
0
0
+8
+3
0
0
0
0
0
0
+2
+4
0
+3
+2
0
Contrast
Contrast Setting
Black Stretch
Dynamic DC
Offset
High
On
Medium
On
Off
On
Off
Off
Auto Contrast
Brightness
Sharpness
Enhancer
On
0
+10
Mode-2
Off
0
0
Off
+2
0
Off
0
–30
Mode-3
Mode-2
Mode-3
Enhancer Setting
Detail
H.Sharp
V.Sharp
Backlight
0
–5
+5
+5
+5
0
0
0
0
0
+10
+10
+30
+10
+5
–5
Backlight Setting
Smart Picture
Off
On
On
Off
Dynamic Backlight High
Medium
Auto
Auto
Auto
Mode-3
Low
Off
Color System
Color Matrix
Auto
Auto
Auto
Auto
Normal
Mode-5
Auto
Auto
Normal
Mode-5
Color Space
Auto
Color Temperature
Mode-2
A-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Pro Game
Signage
CCTV HD CCTV SD Option
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
+5
0
0
0
+8
+4
0
0
+14
+5
0
0
0
0
Off
Off
Off
Off
Medium
Off
High
Off
High
Off
Off
Off
Off
Off
On
On
On
Off
0
0
0
0
–4
+2
0
–15
Mode-3
–10
Mode-3
20
Mode-1
20
Mode-1
–30
Mode-3
Mode-3
–15
–5
–15
+5
0
0
0
+10
0
0
–15
+30
0
0
0
+30
0
0
0
0
+18
+5
–5
+30
Off
On
Off
Off
Off
Off
Off
Off
Medium
Auto
Auto
Wide
Mode-2
Medium
Auto
Auto
Wide
Mode-3
Medium
Auto
Auto
Wide
Mode-3
Off
Auto
Auto
sRGB
Mode-5
Auto
Auto
Auto
Mode-2
Auto
Auto
Normal
Mode-4
A-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Dynamic Standard Theater
Monitor
White Balance Setting
R Drive / G Drive /
B Drive
R Cutoff / G Cutoff /
B Cutoff
0
0
0
0
0
0
0
0
Color Management Mode-1
Color Mngmt. Setting
Mode-2
Mode-3
Off
Red Tint / Red
Color
Yellow Tint /
Yellow Color
Green Tint / Green
Color
Cyan Tint / Cyan
Color
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Skin Tint / Skin
Color
0
Color : Bright Area
Color : Dark Area
0
0
0
0
0
0
0
0
Gamma
Mode-2
High
Mode-2
Medium
Mode-3
Low
Mode-3
Off
Dynamic Gamma
Noise Reduction
Digital VNR
MPEG NR
3DY/C
Auto
Low
On
Auto
Low
On
Auto
Low
On
Off
Off
Off
Natural Cinema
Picture Delay Time
PC Monitor Mode
Eco Mode
Auto
Normal
Off
Auto
Normal
Off
Auto
Normal
Off
Off
Normal
Off
Off
Off
Off
Off
Other
Real Bit Driver
100/120Hz CMD
On
On
On
On
On
On
Off
Off
A-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Pro Game
Signage
CCTV HD CCTV SD Option
0
0
0
0
0
0
0
0
0
0
0
0
Off
Mode-2
Mode-1
Mode-2
Mode-1
Off
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Mode-3
Off
Mode-2
Medium
Mode-3
Medium
Mode-4
Medium
Mode-2
High
Mode-6
Off
Auto
Off
On
Auto
Low
On
Auto
Low
On
Auto
Low
On
Auto
Low
On
Off
Off
Off
Off
Off
Off
Off
Off
Off
Normal
Off
Middle
Off
Normal
Off
Normal
Off
Normal
Off
Short
Off
Off
Off
Off
Off
Off
Off
On
Off
On
On
On
Off
On
On
On
On
Off
Off
A-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up the monitor for your
PC
Selecting the input signal
When you connect a PC to the INPUT-3 terminal, set the type of the input
signal accordingly.
●For signals in VGA60 and XGA60
Set “Sampling Mode” to “Std”. (➔ page 32)
●For signals in WVGA60
Set “Sampling Mode” to “Wide”. (➔ page 32)
●For signals in WXGA (1280), WXGA (1360) and WXGA60
1 Set “Sampling Mode” to “Wide”. (➔ page 32)
2 Set “WXGA Select” as follows. (➔ page 32)
● For signals in WXGA (1280): “1280*768”
● For signals in WXGA (1360): “1360*768”
● For signals in WXGA60: “1366*768”
●For signals in SXGA60
Set “SXGA / SXGA+” to “SXGA”. (➔ page 32)
●For signals in SXGA+60
Set “SXGA / SXGA+” to “SXGA+”. (➔ page 32)
A-10
Download from Www.Somanuals.com. All Manuals Search And Download.
If the picture is not aligned vertically, or letters on the screen look
blurred
Set the aspect to “1:1”, and adjust “Dot Clock” and “Clock Phase”. (➔ page
33)
● For signals in 1920 x 1080, set the aspect to “Full” and adjust the same items.
If the picture is cropped, or extra margins are displayed around it
1 Set the aspect to “Full”.
2 Adjust the position of the picture using “PC Position Adjustment”
until the upper left corner of the picture is positioned at the upper
left corner of the display.
3 Adjust the size of the picture using “H Size” and “V Size” until the
bottom right corner of the picture is positioned at the bottom right
corner of the display.
Enjoy SLR digital camera
photographs
When you select the picture preset of “Photo Pro” in “ Memory Setting ”, you
can view the photographs just the way they were taken.
You can also view photographs on an SD card or USB device using Photo
viewer. (➔ page 36)
For JPEG pictures, select “sRGB” or “AdobeRGB” under the setting of “Color
Space” (➔ page 18) according to the setting of your camera, so that the
photographs are displayed more faithfully to the original.
● It is recommended not to modify the settings of “Photo Pro”. In the initial
setting of “Photo Pro”, “Color Space” is set to “sRGB”.
A-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu index by task
Page
General tone of color
Tint
14
19
19
18
14
14
Tone of color (including white)
Tone of color (in detail)
Range of color representation
Amplitude of the color difference signal
Demodulation angle of the color
difference signal
Color Temperature
White Balance Setting
Color Space
Tint Setting › BY Gain
Tint Setting › BY/RY Angle
Pattern of color correction
Color correction (in detail)
Color Management
Color Mngmt. Setting › Red Tint,
Yellow Tint, etc.
20
20
Total density of color
Color
14
14
14
Amplitude of the color difference signal
Demodulation angle of the color
difference signal
Tint Setting › BY Gain
Tint Setting › BY/RY Angle
Pattern of color correction
Color correction (in detail)
Color Management
Color Mngmt. Setting › Red Color,
Yellow Color, etc.
20
20
Total brightness of pictures
Backlight
16
17
17
24
Reduces backlight in bright scenes
Reduces backlight in dark scenes
Adjusts backlight depending on the
luminance of the room
Backlight Setting › Smart Picture
Backlight Setting › Dynamic Backlight
Eco Mode
Total brightness of pictures
Brightness
Contrast
Contrast Setting › Black Stretch
Contrast Setting › Dynamic DC Offset
Contrast Setting › Auto Contrast
Gamma
15
15
15
15
15
21
21
16
Adjusts the gain of the signal level
Emphasizes darker areas automatically
Reduces brightness in bright scenes
Emphasizes bright areas automatically
Gamma correction value
Adjusts gamma value automatically
Sharpness
Dynamic Gamma
Sharpness
Sharpness (in detail)
Enhancer Setting
Enhancer
16
16
Frequency band to enhance
Bass sound
Treble sound
Equalizer suited for the speakers
Adjusts the delay time of sound
Bass
Treble
PEQ
25
25
26
25
Lip Sync
A-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture
Memory Setting
You can store up to 6 sets of the “Picture” settings and use them.
● When the input is changed, the memory used for the input last time is
automatically applied.
■ Memory1 / Memory2 / Memory3 / Memory4 / Memory5 / Memory6
Load Preset
You can load one of the presets below into a memory.
You can do further adjustment based on the loaded settings.
● Select a preset and press “Load” to load a preset.
■ Dynamic : Makes pictures colorful and bright, suitable for watching in
a well-light room.
■ Standard : The most standard setting.
■ Theater : Suitable for watching cinemas in a dark room.
■ Monitor : Does not apply color adjustments or noise reductions.Input
video signals are displayed as they are.
■ Photo Pro : Suitable for watching still pictures of SLR digital cameras.
■ Game : Gives priority to the response time for picture movement.
Suitable for game consoles.
■ Signage : Suitable for digital signage use in market, shops or hotels.
■ CCTV HD : Suitable for monitoring CCTVs in HD format.
■ CCTV SD : Suitable for monitoring CCTVs in SD format.
■ Option : Suitable for displaying medical images including x-ray
pictures.
● This setting is only for approximate presentation and does not conform to
any official standard of medical imaging.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Tint
Adjusts the tone of color.
■ –30 – +30 (Skin color reddish ↔ Skin color greenish)
Tint Setting
Adjusts the tone of color in detail.
● The setting is fixed to 0 and unadjustable when “Color Space” is set to “sRGB”,
“AdobeRGB”, or “x.v.Color”.
● The setting is fixed to 0 and unadjustable when “Color Space” is set to “Auto”
and the xvYCC signal is input to the HDMI terminal.
● The setting is fixed to 0 and unadjustable when “PC Monitor Mode” is set to
“On”.
◆BY Gain
Adjusts the amplitude of the B-Y color difference signal. You can modify
the total coloring of the picture.
■ –30 – +30 (Small amplitude ↔ Large amplitude)
◆BY/RY Angle
Adjusts the demodulation angle between the B-Y color difference signal
and the R-Y color difference signal. You can modify the total coloring of
the picture.
■ –15 – +15 (Decreasing the angle ↔ Increasing the angle)
Color
Adjusts the density of color.
■ –30 – +30 (Dilute ↔ Dense)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Contrast
Adjusts the brightness of brighter areas of pictures.
■ –30 – +30 (Dark ↔ Bright)
Contrast Setting
Adjusts settings of functions relating with contrast.
● The functions are not available when “Color Space” is set to “sRGB” or
“AdobeRGB”.
● The functions are not available when “PC Monitor Mode” is set to “On”.
◆Black Stretch
Emphasizes darker areas depending on the characteristics of a picture
to make contrast clearer.
■ High / Medium / Low / Off
◆Dynamic DC Offset
Controls the blackness of the picture automatically depending on the
total brightness.
■ On / Off
◆Auto Contrast
Emphasizes brighter areas depending on the characteristics of a picture
to make contrast clearer.
■ On / Off
Brightness
Adjusts blackness.
■ –30 – +30 (Dark ↔ Bright)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharpness
Emphasizes outlines on a picture.
● The setting is unadjustable when “Enhancer” is set to “Off”.
■ –30 – +30 (Fuzzy ↔ Sharp)
Enhancer
Selects the frequency band enhanced by “Sharpness”.
■ Off : Deactivates the function.
■ Mode-1 / Mode-2 / Mode-3
(Emphasizes lower frequency band; for low-resolution picture ↔
Emphasizes higher frequency band; for high-resolution picture)
Enhancer Setting
Adjusts the effects of “Enhancer” in detail.
● All the settings are unadjustable when “Enhancer” is set to “Off”.
◆Detail
Adjusts texture of surface.
■ –15 – +15 (Weaker ↔ Stronger)
◆H.Sharp
Adjusts sharpness of horizontal outlines.
■ –15 – +15 (Weaker ↔ Stronger)
◆V.Sharp
Adjusts sharpness of vertical outlines.
■ –15 – +15 (Weaker ↔ Stronger)
Backlight
Adjusts the brightness of backlight.
■ –30 – +30 (Darker ↔ Brighter)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Backlight Setting
Adjusts settings of functions relating with backlight.
◆Smart Picture
Reduces the backlight automatically in dazzling scenes.
■ On / Off
◆Dynamic Backlight
Reduces the backlight automatically in dark scenes to represent black
deeper.
■ High / Medium / Low / Off
Color System
Selects the color system for the picture signal which is input to INPUT-3
from composite terminal.
● The setting is adjustable only when “Input-3 Setting” is set to “Composite”.
(➔ page 31)
● The setting is unadjustable when “PC Monitor Mode” is set to “On”.
■ Auto : An appropriate color system is automatically applied
depending on the type of the input signal. Normally select this.
■ PAL/50 : When the color system is PAL.
■ PAL/60 : When the color system is PAL 60.
■ SECAM : When the color system is SECAM.
■ NTSC3.58 : When the color system is NTSC 3.58.
■ NTSC4.43 : When the color system is NTSC 4.43.
■ PAL M : When the color system is PAL-M.
■ PAL N : When the color system is PAL-N.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Matrix
Selects the color matrix used for color conversion.
● The setting is fixed to “Auto” and unadjustable when “Color Space” is set to
“sRGB”, “AdobeRGB”, or “x.v.Color”.
● The setting is fixed to “Auto” and unadjustable when ”PC Monitor Mode” is
set to “On”.
● The setting is fixed to “Auto” and unadjustable when “Color Space” is set to
“Auto” and the xvYCC signal is input to the HDMI terminal.
■ Auto : An appropriate color matrix is applied automatically.
■ 709 : The color matrix conforming ITU-R BT.709 is used for conversion.
■ 601 : The color matrix conforming ITU-R BT.601 is used for conversion.
Color Space
Changes the range of color representation.
● “sRGB” or “AdobeRGB” is selectable when “PC Monitor Mode” is set to “On”.
● Even when “Auto” is selected, the setting may not switch to “x.v.Color”
automatically depending on the connected device or the connection status.
■ Auto : Normally applies “Wide”. When the xvYCC signal is input to the
HDMI terminal, “x.v.Color” is applied automatically. When the Photo
viewer is selected, “Normal” is applied automatically.
■ Normal : HDTV standard.
■ Wide : The wide color gamut of the equipped LCD panel. (Wider than
the HDTV standard.)
■ x.v.Color : Color representation suitable for x.v.Color.
■ sRGB : Color representation suitable for sRGB.
■ AdobeRGB : Color representation suitable for AdobeRGB.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Temperature
Adjusts the color temperature (color tone). The higher the color
temperature, the more bluish the picture.
● The setting is fixed to “Mode-5” and unadjustable when “Color Space” is set
to “sRGB” or “AdobeRGB”.
● The setting is fixed to “Mode-5” and unadjustable when “PC Monitor Mode”
is set to “On”.
■ Mode-1 : Bluish display. (approx. 13000 K)
■ Mode-2 : Less bluish than “Mode-1”. (approx. 11000 K)
■ Mode-3 : For general purpose. (approx. 9300 K)
■ Mode-4 : For special purposes including medical imaging. (approx.
8000 K)
■ Mode-5 : Standard setting. (approx. 6500 K)
■ Mode-6 : For conformation of images for printing. (approx. 5000 K)
■ Mode-7 : Significantly reddish setting intended for special usages in
television studios. (approx. 3200 K)
White Balance Setting
Adjusts color temperature in detail; subtle control of RGB gradations.
● These settings are independent of the setting of “Color Temperature”.
◆R Drive / G Drive / B Drive
Adjusts the depth of R/G/B on bright areas.
■ –30 – +30 (Dilute ↔ Dense)
◆R Cutoff / G Cutoff / B Cutoff
Adjusts the depth of R/G/B on dark areas.
■ –30 – +30 (Dilute ↔ Dense)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Management
Adjusts the total coloring of pictures. Three color management presets are
available to suit a variety of color temperature settings.
● The setting is fixed to “Off” and unadjustable when “Color Space” is set to
“sRGB”, “AdobeRGB”, or “x.v.Color”.
● The setting is fixed to “Off” and unadjustable when ”PC Monitor Mode” is set
to “On”.
● The setting is fixed to “Off” and unadjustable when “Color Space” is set to
“Auto” and the xvYCC signal is input to the HDMI terminal.
■ Mode-1 : Improving the vividness of colors. Suitable for high color
temperature.
■ Mode-2 : Standard colors. Suitable for medium color temperature.
■ Mode-3 : Improving the total toning of colors. Suitable for low color
temperature.
■ Off : Deactivates the function.
Color Mngmt. Setting
Adjusts the total coloring of pictures in detail.
● All the settings are fixed to 0 and unadjustable when ”Color Management” is
set to “Off”.
● All the settings are fixed to 0 and unadjustable when “Color Space” is set to
“sRGB”, “AdobeRGB”, or “x.v.Color”.
● All the settings are fixed to 0 and unadjustable when ”PC Monitor Mode” is
set to “On”.
● All the settings are fixed to 0 and unadjustable when “Color Space” is set to
“Auto” and the xvYCC signal is input to the HDMI terminal.
◆Red Tint / Red Color
Adjusts the tone/colorfulness of red colors.
■ –15 – +15 (Magenta ↔ Yellow) / –30 – +30 (Dilute ↔ Dense)
◆Yellow Tint / Yellow Color
Adjusts the tone/colorfulness of yellow colors.
■ –15 – +15 (Red ↔ Green) / –30 – +30 (Dilute ↔ Dense)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
◆Green Tint / Green Color
Adjusts the tone/colorfulness of green colors.
■ –15 – +15 (Yellow ↔ Cyan) / –30 – +30 (Dilute ↔ Dense)
◆Cyan Tint / Cyan Color
Adjusts the tone/colorfulness of blue colors.
■ –15 – +15 (Green ↔ Blue) / –30 – +30 (Dilute ↔ Dense)
◆Skin Tint / Skin Color
Adjusts the tone/colorfulness of skin colors.
■ –15 – +15 (Red ↔ Yellow) / –30 – +30 (Dilute ↔ Dense)
◆Color : Bright Area
Adjusts the color depth of bright areas.
■ –15 – +15 (Dilute ↔ Dense)
◆Color : Dark Area
Adjusts the color depth of dark areas.
■ –15 – +15 (Dilute ↔ Dense)
Gamma
Adjusts the gamma correction value and controls the brightness and
gradation of intermediately bright areas.
■ Mode-1 : For confirmation of images for printing. (Equivalent to γ 1.8)
■ Mode-2 : For general purpose. (Equivalent to γ 2.0)
■ Mode-3 : Standard setting. (Equivalent to γ 2.2)
■ Mode-4 : Setting designed according to general CRT property.
(Equivalent to γ 2.4)
■ Mode-5 : For viewing digital cinemas. (Equivalent to γ 2.6)
■ Mode-6 : For special purposes including medical imaging. Complies
with GSDF (Grayscale Standard Display Function).
■ Mode-7 : Dark areas are brighter when compared to “Mode-3”.
Dynamic Gamma
Adjusts gamma value automatically depending on the brightness of
pictures.
■ High / Medium / Low / Off
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Noise Reduction
Adjusts the settings of picture noise reduction.
● The functions are unavailable when “PC Monitor Mode” is set to “On” or
when signals in a PC signal format are coming in.
◆Digital VNR
Reduces picture noise.
■ Auto : Estimates the amount of noise automatically and applies
suitable noise reduction processing.
■ High / Medium / Low / Off
◆MPEG NR
Reduces noise on MPEG pictures such as mosquito-noise and block-
noise.
■ High / Low / Off
3DY/C
Detects the type of the picture signal (movie or still picture) which is input
to INPUT-3 from composite terminal and applies a suitable Y/C separation
process to each type.
● Unavailable when “Picture Delay Time” is set to “Short”.
● Unavailable when the format of the incoming signal is other than NTSC 3.58,
PAL50, PAL M or PAL N.
■ On / Off
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Natural Cinema
Displays quick-moving parts on cinemas originally taken on films with
more clarity.
● The setting is fixed to “Off” and unadjustable when “Picture Delay Time” is set
to “Short”.
● The setting is fixed to “Off” and unadjustable when “PC Monitor Mode” is set
to “On”.
● The setting is fixed to “Off” and unadjustable when progressive picture signal
is input.
■ Auto / Off
Picture Delay Time
Adjusts the time spent for picture-improving processes. The delay time
becomes shorter though picture quality is down when the processes are
skipped.
● The setting is fixed to “Short” and unadjustable when “PC Monitor Mode” is
set to “On”.
■ Normal : The picture-improving processes are fully applied, giving
priority to picture quality.
■ Middle : Some picture-improving processes are skipped to decrease
the delay time.
■ Short : Most of picture-improving processes are skipped to decrease
the delay time more.
PC Monitor Mode
Sets the monitor for use as a PC monitor.
● Only menu items which are necessary for PC monitors are activated.
● Input signals from HDMI terminals are recognized as PC signals (R:G:B = 4:4:4)
and are processed appropriately.
■ On / Off
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Eco Mode
Adjusts the brightness of backlight depending on the luminance of the
room to reduce power consumption.
■ Display : Activating the function and indicating its performance.
■ On : Activating the function. Its performance is not indicated.
■ Off : Deactivates the function.
Other
◆Real Bit Driver
Makes the gradation of 8 bit signals natural and smooth.
● Also effective on signals not in 8 bit.
■ On / Off
◆100/120Hz CMD
Doubles the number of frames per second to reduce image blur.
● The setting is fixed to “Off” and unadjustable when “Color Space” is set to
“sRGB” or “AdobeRGB”.
● The setting is fixed to “Off” and unadjustable when “Picture Delay Time” is set
to “Short”.
● The setting is fixed to “Off” and unadjustable when “PC Monitor Mode” is set
to “On”.
■ On / Off
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
● The following settings are only adjustable when the dedicated speaker unit
(sold separately) is connected.
● The following settings are not adjustable while using the Photo viewer (➔
page 36).
Bass
Adjusts bass tone.
■ –6 – +6 (Weaker ↔ Stronger)
Treble
Adjusts treble tone.
■ –6 – +6 (Weaker ↔ Stronger)
Balance
Adjusts sound balance.
■ L10 – 10R (To the left ↔ To the right)
Auto Volume Control
Turns down the volume automatically when an excessive strong sound
signal is input.
■ On / Off
Lip Sync
Adjusts the delay time of sound.
■ –3 – +3 (The sound starts earlier ↔ The sound starts later)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
PEQ
Optimizes the sound quality for the dedicated speaker unit (TS-C32SPG:
sold separately). When the speaker unit is connected, setting “PEQ“ to
“On“ brings high and low tones into balance, making the sound clearer.
Select “Off“ when connecting other speakers.
● “PEQ” stands for “Parametric Equalizer”.
■ On / Off
Turn On Volume
Adjusts the initial volume when turning on the monitor.
■ 0 – 50
■ Current : Setting the current volume to the initial.
● If the setting value surpass that of “Volume Limit”, the initial volume at
turning on becomes the maximum value set for “Volume Limit”.
● Amplifiers connected to an HDMI terminal ignore this setting.
Volume Limit
Sets the maximum volume to prevent unexpectedly loud sound
reproduction.
■ 0 – 50
● Amplifiers connected to an HDMI terminal ignore this setting.
Reset
Restores the settings of “Sound” to the initial.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Menu Language
You can choose the language used for on-screen messages.
■ English (EU) / Deutsch / Français(UE) / Italiano / Español (UE) /
Català / Nederlands / Dansk / Svenska / Norsk / Suomi / Polski /
Magyar / Русский / Ελληνικά / Português / Česky / Български /
Українська/ Türkçe / Română /
/
/
/
/
Bahasa Melayu / / Español (US) / Français(US) / English (US) /
Front Panel Lock
Makes operations through the buttons on the monitor ineffective.
■ On : Making the buttons on the monitor ineffective.
■ Off : Making the buttons on the monitor effective.
● You can turn on/off the power by pressing and holding the [ ] button on the
monitor for more than 3 seconds even when the setting is “On”.
● You can change the setting to “Off” by pressing and holding the [MENU]
button on the monitor for more than 3 seconds.
● The settings returns to “Off” after disconnecting the power cord.
Auto Shut Off
Turns off the monitor automatically when no signal comes in.
■ On : Turns off the monitor automatically when no signal comes in for
10 minutes or no operation is done for 4 hours.
■ Off : Deactivates the function.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Aspect
Adjusts the aspect of pictures.
● The setting is also adjustable through the [ASPECT] button on the remote
control.
◆Options when the current input signal is SD
■ Auto : When the video signal contains information about aspect ratio
(WSS etc.), the aspect is switched accordingly. In other cases, the
picture is displayed in either “Regular” or “Panoramic”, depending on
the setting of “4:3 Aspect Setting” (➔ page 31).
■ Regular : No modifying of aspect.
Black areas remain at the left and
right side of the picture.
■ Panoramic : Zooming a picture to
the width of the monitor without
unnatural deformation.
■ 14:9 Zoom : Zooming a 14:9-aspect
picture in the way that the upper and
lower black bands are edged out.
Black areas remain at the left and
right side of the picture.
● You cannot select “14:9 Zoom” for
signals in 480i and 480p.
■ 16:9 Zoom : Zooming a picture in
the way that the upper and lower
black bands in a cinema program are
edged out.
■ 16:9 Zoom Subtitle : Zooming a
picture in the way that the upper
and lower black bands of a cinema
program are edged out leaving
space for captions.
■ Full : Stretching a picture to the
width of the monitor.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
◆Options when the current input signal is HD
● You can select “Full Native” only when the input signal is 1080i/p.
■ Full : Stretching a picture to the
width of the monitor.
■ Full Native : Displaying a picture
of 1080i/p without enlargement.
■ Slim : Shrinking a picture
horizontally. Black areas remain
at the left and right side of the
picture.
■ Panoramic Zoom : Zooming
a picture without unnatural
deformation in the way to edge
out the black parts around a
4:3-aspect cinema program
transferred through 16:9-aspect
signal.
◆Options when the current input signal is from a PC
● You cannot select “Just” and “1:1” for some input signals.
■ Full : Stretching a picture to the
width of the monitor.
■ Just : No modifying of aspect. Black
areas remain at the left and right
side of the picture.
■ 1:1 : No modifying of aspect or
resolution. Black areas remain
around the picture.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Position Adjustment
Adjusts the picture position on the monitor.
● Vertical adjustment is effective when “Aspect” is set to “14:9 Zoom”, “16:9
Zoom”, “Panoramic”, “16:9 Zoom Subtitle”, or “Panoramic Zoom”.
● Horizontal adjustment is effective only when “Aspect” is set to “Panoramic
Zoom”.
● When a PC signal is input, adjust the position on “PC Position Adjustment” in
”PC Setting”.
● The positioning is reset as the power is turned off.
● The positioning is reset as the signal format changes.
● The positioning is reset as the signal aspect changes.
Power Indicator
Sets the action of the power indicator.
■ On : The power indicator remains lit while the power is on.
■ Off : The power indicator does not light.
● The power indicator lights regardless of this setting if no signal is input while
the power is on.
Display
Displays the source indication.
■ On / Off
● The source indication appears regardless of this setting if no signal is input.
● The source indication is displayed for 4 seconds after changing the source
even if the setting is “Off”.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Input Label
Adds a source name specifying a device after the source name (“Input-1” -
“Input-3”).
■ (No label) / VCR / DVD / Blu-ray Disc / PVR / D-VHS / STB / SAT /
AMP / GAME / CAM / DISC / PC
4:3 Aspect Setting
Selects the aspect setting which is applied when “Aspect” (➔ page 28)
is set to “Auto”. The picture is displayed in the selected aspect when the
aspect is 4:3 or when the monitor cannot detect the aspect of a picture.
■ Regular : Displays the picture in “Regular”.
■ Panoramic : Displays the picture in “Panoramic”.
1080 Auto Setting
Selects the default aspect for 1080i/p signals.
■ Full : Expands the picture to the full display size.
■ Full Native : Displays the picture in the same magnification (100%
scan).
Input-3 Setting
Selects the signal type for the INPUT-3 terminal (D-sub 15 pin).
● Use the supplied conversion cables and other cords according to the type of
connection. (➔ page 06)
■ PC : For PC signals
■ Component : For component signals
■ Composite : For composite signals
31
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Setting
Adjusts the settings for PC signals.
● The items below are unadjustable when no PC signal is input: “H Size”,
“V Size”, “Dot Clock”, “Clock Phase”, “PC Position Adjustment”, and “Auto
Position Adjustment”.
● “Auto Position Adjustment” is unavailable for INPUT-3.
● “Dot Clock” and “Clock Phase” are unavailable for INPUT-1, INPUT-2.
◆Sampling Mode
Sets the display size for an analog input signal.
■ Std : For VGA60 and XGA60 signals
■ Wide : For WVGA60, WXGA (1280), WXGA (1360) and WXGA60 signals
◆WXGA Select
Sets the display size for an analog input signal.
■ 1280*768 : For WXGA (1280) signal
■ 1360*768 : For WXGA (1360) signal
■ 1366*768 : For WXGA60 signal
◆SXGA / SXGA+
Sets the display size for an analog input signal.
■ SXGA : For SXGA60 signal
■ SXGA+ : For SXGA+60 signal
◆H Size
Adjusts the picture width.
■ –20 – +20 (Smaller ↔ Larger)
◆V Size
Adjusts the picture height.
■ –20 – +20 (Smaller ↔ Larger)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
◆Dot Clock
Adjust this when the picture is not aligned vertically.
● The adjustment is kept after turning off the power.
■ –20 – +20
◆Clock Phase
Adjust this when letters on the screen look blurred or swaying.
● The adjustment is kept after turning off the power.
■ 0 – 31
◆PC Position Adjustment
Adjusts the picture position on the monitor.
● The adjustment is kept after turning off the power.
◆Auto Position Adjustment
Adjusts the picture position automatically.
◆Reset
Restores the settings of “PC Setting” to the initial.
Reset
Restores the settings of “Setup” to the initial.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI
Control with HDMI
Makes an HDMI CEC-compatible external component controllable through
this monitor.
■ On : Enables HDMI CEC control.
■ Off : Deactivates HDMI CEC control.
One Touch Play
Starting playback on an HDMI CEC-compatible external component
automatically turns on the monitor and change its source to the
component.
● The setting is fixed to “Off” and unadjustable when “Control with HDMI” is set
to “Off”.
● Dedicated HDMI components cooperate with the monitor regardless of the
setting.
■ On / Off
Power Off Link
Turning off the monitor automatically turns off an HDMI CEC-compatible
external component.
● The setting is fixed to “Off” and unadjustable when “Control with HDMI” is set
to “Off”.
● Dedicated HDMI components cooperate with the monitor regardless of the
setting.
■ On / Off
34
Download from Www.Somanuals.com. All Manuals Search And Download.
AMP Control
Makes an HDMI CEC-compatible amplifier controllable through the
monitor.
● The setting is fixed to “Off” and unadjustable when “Control with HDMI” is set
to “Off”.
■ On / Off
Input-1 Audio
Selects the audio signal type for INPUT-1.
■ Auto : Detects the type automatically.
■ Digital : For HDMI equipment.
■ Analogue : For DVI equipment.
Reset
Restores the settings of “HDMI” to the initial.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing photographs on
SD card/USB device
Cautions
● Insert or remove SD cards and USB devices gently and in the right direction.
Otherwise, the devices or the monitor may be damaged.
● It is recommended to keep a backup of your files.
● Do not connect a mouse, keyboard or the like.
● Do not use a USB hub or extension cable.
1 Insert an SD card/USB device into the SD card slot/USB
terminal on the side of the monitor.
●Slide the SD card into the
slot until it clicks into place.
●To remove the SD card,
push it in until it clicks and
then pull it out.
2 Set the input to “Input-4”.
The Folder Index shows a list of folders and photographs on the device .
SD Card
Photo Viewer
Folder Index
Folder 1
Page 1 / 2
Folder 1
Summer08
Summer09
LakeCom...
01_090812...
Photo_225...
01_090902...
Cat_in_yard...
Cat_sleepi...
Rouisev...
36
Download from Www.Somanuals.com. All Manuals Search And Download.
● To view the next/previous page, press [GREEN]/[RED].
● When you turn on the monitor while both an SD card and a USB device are
connected, the photographs on the SD card are displayed. Select “Flash
Device“ in the “Device” setting (➔ page 38) to display the photographs on the
USB device.
● The thumbnails of some files may not be shown.
● This monitor can only display file names as alphabetical letters.
● Photographs with large file-sizes may take a while to be displayed.
3 Select a photograph to display, and press [OK].
The selected photograph is displayed full-screen.
● Some files may be displayed with bands around the edges.
● To show the photographs in a folder, press [OK] on the folder.
● To see the next/previous photograph, press [ ]/[ ].
● To exit the full-screen display and show the Folder Index, press [EXIT].
To exit the photograph display
Select an input other than “Input-4”.
To view photographs in slide show
1 Press [YELLOW] in the Folder Index.
●The slide show starts from the selected photograph.
●To pause/resume the slide show, press [OK].
●To display the photographs in a random order, press [BLUE] in the
Folder Index.
●To finish the slide show, press [BACK].
37
Download from Www.Somanuals.com. All Manuals Search And Download.
To customize the settings
1 Open the menu.
Photo Viewer
SD Card
Viewer Option
Device
Sort
SD Card
Date
10 sec
Interval Time
Transition
Box
Initial Mode
Folder Index
2 Change the settings.
3 Exit the menu.
◆Device
Select which device is displayed when both are connected; SD card or
USB device.
◆Sort
Select the display order of photographs.
■ File Name : In alphabetic order by file name.
■ Date : In order of the date when the file was modified.
◆Interval Time
Select how long each picture is displayed for during slide shows.
◆Transition
Select the transition effect used during slide shows.
◆Initial Mode
Select the initial mode of the Photo viewer function. Either the Folder
Index is displayed, or a slide show is started automatically.
● Menu items are displayed in English if you have selected “
”, “ ”, “ ” in “Menu Language” of “Setup”.
”, “
” or
“
38
Download from Www.Somanuals.com. All Manuals Search And Download.
About SD cards and USB devices
● The maximum capacity of devices playable on this monitor is as follows:
- SD cards, miniSD cards, microSD cards: 2 GB
- SDHC cards, miniSDHC cards, microSDHC cards: 32 GB
- USB devices: 32 GB
● When using miniSD cards or microSD cards, put them in an appropriate
adapter before inserting them into the monitor.
● Use SD cards which are guaranteed to work between –25 °C and 85 °C.
● Not all SD cards or USB devices are guaranteed to work on this monitor.
● Format SD cards on a photographing device such as a digital camera, or
on a computer using SD memory card formatting software.
● Format USB devices on a computer in “FAT 32” or “FAT”.
Playable files
● Format: JPEG (.jpg, .JPG)
● Pixel size: 160 x 120 – 8192 x 8192 (The file size must be under 10 MB.)
● Picture files of other than JPEG format, Progressive JPEG files, JPEG 2000
files, MOTION JPEG files or music files cannot be played back.
About the displaying of pictures
● Filenames which are too long may be shortened when displayed.
● If you have edited or copied picture files on a computer, their date
properties may have been modified, and their thumbnail may have been
deleted.
●Some picture files may not be displayed properly due to the device which
created them.
● It may take some time before pictures are displayed when the device
contains a large number of files or folders.
● This monitor can display up to 9,999 files.
● Pictures in a folder deeper than the eighth layer of subfolders may not be
displayed.
● When selecting a file of a format which is not supported, its thumbnail
may be displayed instead.
● Picture quality can be adjusted using the items in the “Picture” menu.
However, some of them are not available for the Photo viewer.
● If the screen as illustrated on the right is
displayed, the Photo viewer is starting up. Wait
for a while until it is ready.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
External Control
You can control GD-32X1U from external control equipment (a personal
computer or a dedicated controller) via the RS-232C terminal on the rear of
the monitor.
●Connect the RS-232C extension cable to the RS-232C terminal on the
rear side of the monitor. (➔ page 07)
Communication specifications
Cable
A crossover cable with a RS-232C connector
Communication specifications
●Baud Rate:
●Data Bits:
●Parity:
●Stop Bits:
●Flow Control:
19200 bps
8 bits
Odd parity
1 bit
No control
●Communication Code: ASCII Code
Terminal specifications
Pin No.
Signal
—
RXD
TXD
—
1
2
3
4
5
6
7
8
9
GND
—
—
—
—
This is a male
terminal.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Command outline
To control the monitor from external control equipment, send operation
commands to the monitor.
Example of communication procedures
GD-32X1U
1
! 0x82 0x80 IP 3 Lf
External control
equipment
3
2 Ack 0x82 0x80 IP 3 Lf
1Operation command to select “Input-3”.
2Acknowledgment from the monitor.
3The input is changed to “Input-3”.
Command structure
! 0x82 0x80 IP 3 Lf
a
b
c
d
e
f
a: Header
! : Operation command from the external control
device.
? : Enquiry command from the external control
device.
@ : Response from the monitor to an enquiry
command.
Ack (0x06): Positive acknowledge from the monitor.
Nak (0x15): Negative acknowledge from the
monitor.
b: Device ID
0x82 (fixed)
c: Monitor ID
d: Command
e: Data
0x80 – 0xFF (Default setting is 0x80.)
See “Command list” on the next page.
f: Termination
Lf (0x0A)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Command list
●“ ” is the monitor ID. Normally, set it to “0x80”.
*
●Enter the appropriate data to “xx” or “x”.
No.
Operation commands
1†
!
0x82
*
P
W
x
x
Lf
Lf
2†
!
0x82
*
I
P
3†
4†
5†
!
!
!
0x82
0x82
0x82
*
*
*
V
A
V
L
M
S
x
x
x
x
Lf
Lf
Lf
6†
!
0x82
*
A
S
x
Lf
7
8
!
!
0x82
0x82
*
*
R
S
C
U
x
I
x
C
x
x
x
x
Lf
Lf
9
!
!
0x82
0x82
*
*
S
S
U
U
R
F
M
K
x
x
Lf
Lf
10††
†
For these commands, you can make enquiry commands by entering “?” instead
of “!” and omitting the data bytes. When you send an enquiry command, the
monitor sends back an acknowledge, then an answer about its current status.
†† When you change this setting, setting of “Front Panel Lock” (➔ page 27) is also
changed accordingly.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions
Data
0: Off
Turns on/off the monitor.
1: On
+: Switches the power status.
1: Input-1
2: Input-2
3: Input-3
Selects the input.
4: Input-4
00 – 50: Sets the volume directly.
+: Turns the volume up.
–: Turns the volume down.
0: Mute is released.
Adjusts the volume.
Turns muting on/off.
1: The sound is muted.
+: Switches the mute status.
0: Memory1 / 1: Memory2 / 2: Memory3 /
3: Memory4 / 4: Memory5 / 5: Memory6 /
+, –: Changes the setting.
0: Panoramic, Panoramic Zoom /
1: 16:9 Zoom / 2: Full / 3: Regular, Slim /
4: Full Native / 5: 14:9 Zoom /
6: 16:9 Zoom Subtitle / 7: Just /
8: 1:1 / 9: Auto /
Selects an item of “ Memory Setting ”
(➔ page 13).
Selects the aspect ratio.
+, –: Changes the aspect ratio setting.
Sends the remote control code pass-through.
Sets the monitor ID.
0x0000 – 0xFFFF
0x80 – 0xFF
Enables/disables operations from the remote
control.
0: Disabled.
1: Enabled.
0: Disabled.
1: Enabled.
Enables/disables operations from the touch
sensor panel.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
The following are not malfunctions.
●This LCD display is built with very high precision technology; however,
be aware that a few pixels may be missing or constantly lit.
●When a still image is displayed for a long time, it may remain
indistinctly on the screen after the picture has changed. The remaining
picture will disappear after a while.
●The following symptoms are problems only when pictures or sounds
are not played back normally.
● A slight electric shock occurs when you touch the monitor.
● The top and/or rear panel of the monitor becomes hot.
● The monitor emits a cracking noise.
● The monitor emits a mechanical noise.
●If the monitor does not operate normally, perform the following to
reset the monitor.
● Unplug the monitor from the wall outlet, and plug it in again.
Cannot turn on the monitor.
●Connect the power cord properly. (➔ page 08)
The remote control does not work.
●Insert the batteries in the correct direction. (➔ page 04)
●Replace the batteries with new ones.
●Aim the remote control to the remote sensor on the monitor.
(➔ page 09)
● The effective range of the remote control is about 7 meters (23 feet).
●Get closer to the monitor.
●Remove any obstruction between the remote control and the monitor.
No picture from a connected device.
●Select the correct input on the monitor.
●Connect the external device properly.
●Turn on the external device and start playback.
The monitor turns off automatically.
●When you want to display a picture on the monitor for a long time,
select “Off” for “Auto Shut Off” (➔ page 27) in “Setup”.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
No sound.
●No sound is output from the monitor if the dedicated speaker unit (sold
separately) is not connected. (➔ page 05)
●Press the MUTING button.
●Check the amplifier connection.
● When “AMP” is selected under “Speaker”, the sound is output from the
amplifier, and not from the speakers of the monitor. (➔ page 11)
No picture from HDMI devices.
●Select the correct input on the monitor.
●Use a cable marked with the HDMI logo.
●Please use a High Speed HDMITM Cable. High Speed HDMITM Cables are
tested to carry an HD signal up to 1080p and higher. (➔ page 07)
No sound from HDMI devices.
●Set “Input-1 Audio” properly. (➔ page 35)
Cannot control HDMI CEC devices.
●Set “Control with HDMI” to “On”. (➔ page 34)
●Some devices may not accept controls by HDMI CEC.
Cannot operate the product using the buttons on the monitor.
●Set “Front Panel Lock” to “Off”. (➔ page 27)
Picture from a computer is strange.
●Adjust the items under “PC Setting”. (➔ page 32)
The source indication stays on the display.
●Turn on the selected external device and start playback.
● When no signal is input, you cannot turn off the source indication.
The picture and the sound do not synchronize.
●Adjust “Lip Sync”. (➔ page 25)
●Adjust “Picture Delay Time”. (➔ page 23)
Colors are strange.
●Adjust the items under “Picture”. (➔ page A-2)
●Load one of the picture presets to discard the current settings and
apply the selected preset. (➔ page A-3)
No pictures displayed from an SD card/USB device.
●Check whether the picture files are of the supported format.
(➔ page 39)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model name
GD-32X1U
LCD panel
32-inch (viewable)
801.3 mm (31.5’’)
Screen size (visible area
size measured diagonally)
Display resolution
Display colors
1920×1080
1.07 billion colors (10 bit color)
178 ° (Horizontally)
178 ° (Vertically)
400 cd/m2
4000 : 1
Viewing angle (TYP.)
Luminance (TYP.)
Contrast ratio (TYP.)
Horizontal/vertical
frequency (computer
signal)
Horizontal: 24.83 kHz – 67.5 kHz
Vertical: 56.42 Hz – 75 Hz
Compliant video signal
formats
➔ page 50
Audio output
Speakers: 5 W + 5 W
(When TS-C32SPG (12 Ω : sold separately) is
connected.)
Operating environment
Operating temperature: 0 °C – 40 °C (32 °F –
104 °F)
Operating humidity: 20 % – 80 % (non-
condensing)
(Slightly variable depending on ambient
conditions for installation.)
DC 28V
Power requirements
AC adapter
AC 100 V - 240V, 50 Hz/60 Hz
(FSP180-AKAN1)
Power consumption
Power consumption (on
standby)
136 W
AC 230 V: 0.55 W
AC 120 V: 0.67 W
Dimensions
➔ page 48
Mass
5.7 kg (12.6 lbs) (without the stand)
6.9 kg (15.2 lbs) (including the stand)
6.4 kg (14.1 lbs) (including the VESA bracket)
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied accessories
Input terminals
➔ page 04
HDMI ×2, D-sub (15 pin) ×1, Audio input (3.5 mm
stereo mini jack), USB type slot, SD card slot
Speaker output for the exclusive speaker unit
RS-232C-compliant
Output terminals
External control
Display Calibration
When you want to calibrate the gamma and the white balance of the
monitor, you can download a dedicated software from the web page
below.
●To perform the calibration, you need i1Display 2 of X-Rite Incorporated
and a Windows PC.
Notice on transportation
●This monitor is precision equipment and needs dedicated packing
material for transportation. Never use any packing material supplied
from sources other than JVC or JVC-authorized dealers.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
unit: mm (inch)
1 : 496.1 (19 5/8)
2 : 55.0 (2 1/4)
7 :
7.8 (3/8)
! : 136.0 (5 3/8)
@ : 100.0 (4)
8 : 22.5 (1)
/80.0 (3 1/4)(with TS-C32SPG) 9 : 190.9 (7 5/8) # : 100.0 (4)
3 : 772.4 (30 1/2)
4 : 40.7 (1 5/8)
5 : 254.0 (10)
0 : 173.7 (6 7/8) $ : 45.0 (1 7/8)
- : 336.2 (13 1/4) % : 45.0 (1 7/8)
= : 99.8 (4)
6 : 214.7 (8 1/2)
~ : 133.7 (5 3/8)
● Use screws of adequate length (M4 × 12 – 16) to fix the VESA bracket and wall
mount adapter.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Logos & Licenses
As an “ENERGY STAR®” partner, JVC has determined that
this product or product model meets the “ENERGY STAR®”
guidelines for energy efficiency.
● For easy understanding, pictures and illustrations are shown by being
emphasized, omitted or composed, and may slightly be different from actual
products.
● Design and specifications are subject to change without notice.
● HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
● “x.v.Color” and “x.v.Color” logo are trademarks.
● All company names and product names mentioned herein are used for
identification purposes only, and may be the trademarks or registered
trademarks of their respective companies.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliant signal formats (1)
INPUT-3 terminal (PC)
Frequency
Horizontal (kHz)
24.823
31.469
37.861
37.500
31.020
37.879
48.077
46.875
48.363
56.476
60.023
47.776
47.712
48.363
63.981
63.981
65.220
45.000
67.500
Signal
Vertical (Hz)
Dot clock (MHz)
21.050
PC98
VGA 60†1
56.42
59.94
72.81
75.00
60.00
60.32
72.19
75.00
60.00
70.07
75.03
59.87
60.02
60.00
60.02
60.02
60.00
60.00
60.00
25.175
VGA 72
31.500
VGA 75
WVGA 60†2
31.500
33.750
SVGA 60
40.000
SVGA 72
50.000
SVGA 75
XGA 60†1
49.500
65.000
XGA 70
75.000
XGA 75
78.750
WXGA(1280)†2†3
WXGA(1360)†2†4
WXGA 60†2†5
SXGA 60†6
SXGA+ 60†7
SXGA+ 60*
1280x720
1920x1080
79.500
85.500
86.715
108.000
108.000
122.614
74.250
148.500
†1 : Set “Sampling Mode” to “Std”.
†2 : Set “Sampling Mode” to “Wide”.
†3 : Set “WXGA Select” to “1280*768”.
†4 : Set “WXGA Select” to “1360*768”.
†5 : Set “WXGA Select” to “1366*768”.
†6 : Set “SXGA / SXGA+” to “SXGA”.
†7 : Set “SXGA / SXGA+” to “SXGA+”.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Total pixels
pixel per line line per frame
Effective pixels
pixel per line line per frame
Standard
848
800
440
525
520
500
517
628
666
625
806
806
800
798
795
806
1066
1066
1087
750
1125
640
640
400
480
480
480
480
600
600
600
768
768
768
768
768
768
1024
1050
1050
720
1080
—
VESA Standard
VESA Standard
VESA Standard
—
832
640
840
640
1088
1056
1040
1056
1344
1328
1312
1664
1792
1793
1688
1688
1880
1650
2200
848
800
VESA Standard
VESA Standard
VESA Standard
VESA Standard
VESA Standard
VESA Standard
—
800
800
1024
1024
1024
1280
1360
1366
1280
1400
1400
1280
1920
VESA Standard
—
VESA Standard
—
—
—
EIA/CEA-861-D
● Signals in a format not listed above may not be displayed properly. Change the
resolution setting on the PC.
● Some signals may not be displayed properly even if their format is in the list
above.
● Because signals in PC98, VGA 72, VGA 75, SVGA 72, SVGA 75, XGA 70 and XGA
75 need to be converted into 60Hz before displayed on the monitor, playback
of these signals look jerky. Select other signal formats for smoother playback of
moving pictures.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliant signal formats (2)
INPUT-3 terminal (composite)
INPUT-3 terminal (component)
Frequency
Frequency
Signal
Signal
Vertical (Hz) Horizontal (kHz)
Vertical (Hz) Horizontal (kHz)
PAL/50
PAL/60
SECAM
NTSC3.58
NTSC4.43
PAL M
50.00
59.94
50.00
59.94
59.94
59.94
50.00
15.63
15.73
15.63
15.73
15.73
15.73
15.63
480/60i
59.94
50.00
59.94
50.00
59.94
50.00
59.94
50.00
59.94
50.00
29.97
24.00
15.73
15.63
31.47
31.25
44.96
37.50
33.72
28.13
67.43
56.25
33.72
27.00
576/50i
480/60p
576/50p
720/60p
720/50p
1080/60i
1080/50i
1080/60p
1080/50p
1080/30p
1080/24p
PAL N
INPUT-1, INPUT-2 terminal (HDMI-HDMI)
Frequency
Signal
Vertical (Hz)
59.94/60
59.94/60
59.94/60
59.94/60
59.94/60
59.94/60
50.000
Horizontal (kHz)
31.469/31.5
31.469/31.5
44.955/45
33.716/33.75
15.734/17.75
67.433/67.5
31.25
Dot clock (MHz)
25.175/25.2
27/27.027
74.176/74.25
74.176/74.25
27/27.027
148.352/148.5
27
VGA 60
480/60p
720/60p
1080/60i
480/60i
1080/60p*
576/50p
720/50p
1080/50i
576/50i
50.000
37.5
74.25
50.000
28.13
74.25
50.000
15.63
27
1080/50p
1080/24p
1080/25p
1080/30p
50.000
56.25
148.5
23.976/24
25.000
26.973/27
28.13
74.176/74.25
74.25
29.97/30
33.716/33.75
74.176/74.25
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Total pixels
pixel per line
Effective pixels
pixel per line
line per frame
525
line per frame
480
800
858
640
720
525
480
1650
2200
858
750
1280
1920
720
720
562/563
262/263
1125
1080
480
2200
864
1920
720
1080
576
625
1980
2640
864
750
1280
1920
720
720
562/563
312/313
1125
1080
576
2640
2750
2640
2200
1920
1920
1920
1920
1080
1080
1080
1080
1125
1125
1125
* EIA/CEA-861-D-compliant
● Signals in a format not listed above may not be displayed properly. Change the
resolution setting on the PC.
● Some signals may not be displayed properly even if their format is in the list
above.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
●This software is based in part on the work of the lndependent JPEG Group.
●The open source software is embedded in this product. For more
information, please go to:
●DejaVu font is used in this product under the license below.
_____________________________________________________
Fonts are (c) Bitstream (see below). DejaVu changes are in public domain. Glyphs imported from
Arev fonts are (c) Tavmjong Bah (see below)
Bitstream Vera Fonts Copyright
------------------------------
Copyright (c) 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera is a trademark of
Bitstream, Inc.
Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts
accompanying this license (“Fonts”) and associated documentation files (the “Font Software”),
to reproduce and distribute the Font Software, including without limitation the rights to use,
copy, merge, publish, distribute, and/or sell copies of the Font Software, and to permit persons
to whom the Font Software is furnished to do so, subject to the following conditions:
The above copyright and trademark notices and this permission notice shall be included in all
copies of one or more of the Font Software typefaces.
The Font Software may be modified, altered, or added to, and in particular the designs of
glyphs or characters in the Fonts may be modified and additional glyphs or characters may be
added to the Fonts, only if the fonts are renamed to names not containing either the words
“Bitstream” or the word “Vera”.
This License becomes null and void to the extent applicable to Fonts or Font Software that has
been modified and is distributed under the “Bitstream Vera” names.
The Font Software may be sold as part of a larger software package but no copy of one or more
of the Font Software typefaces may be sold by itself.
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK,
OR OTHER RIGHT. IN NO EVENT SHALL BITSTREAM OR THE GNOME FOUNDATION BE LIABLE
FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR
FROM OTHER DEALINGS IN THE FONT SOFTWARE.
Except as contained in this notice, the names of Gnome, the Gnome Foundation, and Bitstream
Inc., shall not be used in advertising or otherwise to promote the sale, use or other dealings in
this Font Software without prior written authorization from the Gnome Foundation or Bitstream
Inc., respectively. For further information, contact: fonts at gnome dot org.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Arev Fonts Copyright
------------------------------
Copyright (c) 2006 by Tavmjong Bah. All Rights Reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts
accompanying this license (“Fonts”) and associated documentation files (the “Font Software”),
to reproduce and distribute the modifications to the Bitstream Vera Font Software, including
without limitation the rights to use, copy, merge, publish, distribute, and/or sell copies of the
Font Software, and to permit persons to whom the Font Software is furnished to do so, subject
to the following conditions:
The above copyright and trademark notices and this permission notice shall be included in all
copies of one or more of the Font Software typefaces.
The Font Software may be modified, altered, or added to, and in particular the designs of
glyphs or characters in the Fonts may be modified and additional glyphs or characters may be
added to the Fonts, only if the fonts are renamed to names not containing either the words
“Tavmjong Bah” or the word “Arev”.
This License becomes null and void to the extent applicable to Fonts or Font Software that has
been modified and is distributed under the “Tavmjong Bah Arev” names.
The Font Software may be sold as part of a larger software package but no copy of one or more
of the Font Software typefaces may be sold by itself.
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK,
OR OTHER RIGHT. IN NO EVENT SHALL TAVMJONG BAH BE LIABLE FOR ANY CLAIM, DAMAGES
OR OTHER LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER
DEALINGS IN THE FONT SOFTWARE.
Except as contained in this notice, the name of Tavmjong Bah shall not be used in advertising or
otherwise to promote the sale, use or other dealings in this Font Software without prior written
authorization from Tavmjong Bah. For further information, contact: tavmjong @ free. fr.
$Id: LICENSE 2133 2007-11-28 02:46:28Z lechimp $
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Icons
Computer. . . . . . . . . . . . 06, A-10
Connection . . . . . . . . . . . . . . . . 06
Contrast . . . . . . . . . . . . . . . . . . . 15
Contrast Setting. . . . . . . . . . . . 15
Control with HDMI . . . . . . . . . 34
. . . . . . . . . . . . . . . . . . . . . 10
Numbers
3DY/C . . . . . . . . . . . . . . . . . . . . . 22
4:3 Aspect Setting. . . . . . . . . . 31
1080 Auto Setting. . . . . . . . . . 31
D
Digital camera . . . . . . . . . . . A-11
Display . . . . . . . . . . . . . . . . . . . . 30
DVI . . . . . . . . . . . . . . . . . . . . . . . . 06
Dynamic Gamma. . . . . . . . . . . 21
A
AMP Control . . . . . . . . . . . . . . . 35
Aspect . . . . . . . . . . . . . . . . . . . . . 28
ASPECT . . . . . . . . . . . . . . . . . . . . 10
Auto Shut Off . . . . . . . . . . . . . . 27
Auto Volume Control. . . . . . . 25
E
F
Eco Mode . . . . . . . . . . . . . . . . . . 24
Enhancer . . . . . . . . . . . . . . . . . . 16
Enhancer Setting. . . . . . . . . . . 16
EXIT . . . . . . . . . . . . . . . . . . . . . . . 12
B
Backlight . . . . . . . . . . . . . . . . . . 16
Backlight Setting. . . . . . . . . . . 17
Balance . . . . . . . . . . . . . . . . . . . . 25
Bass . . . . . . . . . . . . . . . . . . . . . . . 25
Battery. . . . . . . . . . . . . . . . . . . . . 04
Brightness . . . . . . . . . . . . . . . . . 15
Front Panel Lock . . . . . . . . . . . 27
G
Gamma . . . . . . . . . . . . . . . . . . . . 21
C
H
Color . . . . . . . . . . . . . . . . . . . . . . 14
Color Management . . . . . . . . 20
Color Matrix. . . . . . . . . . . . . . . . 18
Color Mngmt. Setting . . . . . . 20
Color Space . . . . . . . . . . . . . . . . 18
Color System. . . . . . . . . . . . . . . 17
Color Temperature . . . . . . . . . 19
Component. . . . . . . . . . . . . . . . 06
Composite . . . . . . . . . . . . . . . . . 06
HDMI . . . . . . . . . . . . . . . . . . . . . . 34
HDMI CEC. . . . . . . . . . . . . . . . . . 11
I
Input-1 Audio . . . . . . . . . . . . . . 35
Input-3 Setting. . . . . . . . . . . . . 31
Input Label . . . . . . . . . . . . . . . . 31
56
Download from Www.Somanuals.com. All Manuals Search And Download.
L
R
S
T
LINK . . . . . . . . . . . . . . . . . . . . . . . 11
Lip Sync . . . . . . . . . . . . . . . . . . . 25
Remote control unit. . . . . . . . 10
Remote sensor . . . . . . . . . . . . . 09
Reset . . . . . . . . . . . . . . . 26, 33, 35
RS-232C . . . . . . . . . . . . . . . . . . . 40
M
Main unit . . . . . . . . . . . . . . . . . . 09
MENU . . . . . . . . . . . . . . . . . . . . . 12
Menu Language . . . . . . . . . . . 27
MUTING . . . . . . . . . . . . . . . . . . . 10
Setup . . . . . . . . . . . . . . . . . . . . . . 27
Sharpness . . . . . . . . . . . . . . . . . 16
Sound . . . . . . . . . . . . . . . . . . . . . 25
Speaker unit . . . . . . . . . . . . . . . 05
N
Natural Cinema . . . . . . . . . . . . 23
Noise Reduction . . . . . . . . . . . 22
Tint. . . . . . . . . . . . . . . . . . . . . . . . 14
Tint Setting . . . . . . . . . . . . . . . . 14
Treble . . . . . . . . . . . . . . . . . . . . . 25
Turn On Volume . . . . . . . . . . . 26
O
One Touch Play . . . . . . . . . . . . 34
OPTION. . . . . . . . . . . . . . . . . . . . 10
Other . . . . . . . . . . . . . . . . . . . . . . 24
V
P
Video game. . . . . . . . . . . . . . . A-5
VOL +/–. . . . . . . . . . . . . . . . . . . . 10
Volume Limit . . . . . . . . . . . . . . 26
PC Monitor Mode . . . . . . . . . . 23
PC Setting . . . . . . . . . . . . . . . . . 32
PEQ. . . . . . . . . . . . . . . . . . . . . . . . 26
Picture. . . . . . . . . . . . . . . . .A-2, 13
Picture Delay Time . . . . . . . . . 23
Position Adjustment . . . . . . . 30
POWER . . . . . . . . . . . . . . . . . . . . 10
Power cable. . . . . . . . . . . . . . . . 08
Power indicator . . . . . . . . . . . . 09
Power Indicator . . . . . . . . . . . . 30
Power Off Link . . . . . . . . . . . . . 34
W
White Balance Setting . . . . . . 19
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
2009 Victor Company of Japan, Limited
0909HHH-MW-MT
Download from Www.Somanuals.com. All Manuals Search And Download.
|