CASSETTE RECEIVER
CASSETTEN-RECEIVER
RADIOCASSETTE
RADIO/CASSETTESPELER
KS-F100
/I
ATT
35WX4
DETACHABLE CONTROL PANEL
SOUND
LOUD
DISP
KS-F100
MO
PROG
SEL
SCAN
F M
1
2
3
4
5
6
E X
A M
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Pour l’installation et les raccordements, se référer au manuel séparé.
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende
handleiding.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
GEBRUIKSAANWIJZING
FSUN3030-311S
[E]
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
2
/I
ATT
35WX4
1
DETACHABLE CONTROL PANEL
SOUND
KS-F100
PROG
LOUD
MO
SEL
Note:
DISP
SCAN
When you use this unit for the
first time, set the built-in
clock correctly, see page 13.
1
2
3
4
5
6
E X
A M
F M
3
2
1
/I
ATT
Turn on the power.
Notes on One-Touch Operation:
• When you select tuner as a source in step 2 below, the power automatically
comes on. You do not have to press this button to turn on the power.
• If the cassette is already in the cassette compartment, tape play starts
automatically.
E
X
A
M
F
M
2
Play the source.
To operate the tuner, see pages 4 – 8.
To operate the tape deck, see page 9.
EX (extra) button: To use this button, you need to
preset your favorite station in advance. For details,
see pages 6 – 7.
3
4
Adjust the volume.
LOUD
Volume level appears.
Adjust the sound as you want (see pages 10 – 12).
To drop the volume in a moment
Press
ATT briefly while listening to any source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press
ATT for more than 1 second.
Note:
For security reasons, a numbered ID card is provided with this unit, and same ID number is imprinted on the
unit’s chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO OPERATIONS
Listening to the radio
/I
ATT
35WX4
1
DETACHABLE CONTROL PANEL
SOUND
LOUD
DISP
KS-F100
MO
PROG
SEL
SCAN
F M
1
2
3
4
5
6
E X
A M
3
2
1
2
/I
ATT
Turn on the power.
Note on One-Touch Operation:
When you select a band in step 2 below, the power automatically comes on.You
do not have to press this button to turn on the power.
A
M
F
M
Select the band (FM1, FM2, FM3
or AM).
FM1
FM3
FM2
AM
You can select any one of FM1, FM2, and
FM3 to listen to an FM station.
LOUD
POP
SOFT
BEAT
Note:
When a cassette is in the cassette compartment, you cannot select the tuner. Be sure
to eject the cassette from the cassette compartment to listen to the radio.
3
To search stations of
higher frequencies.
Start searching a station.
When a station is received, searching stops.
LOUD
To search stations of
POP
SOFT
BEAT
lower frequencies.
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency manually:
1 Press FM or AM to select the band.
2 Press and hold
Now you can manually change the frequency while “M” is flashing.
3 Press or repeatedly until the frequency you want is reached.
or
until “M” starts flashing on the display.
• If you hold down the button, the frequency keeps changing (in 50 kHz intevals for FM and
9 kHz intervals for AM — MW/LW) until you release the button.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing stations in memory
You can store the broadcasting stations in memory.
Storing stations manually
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band
/I
ATT
35WX4
DETACHABLE CONTROL PANEL
SOUND
LOUD
DISP
KS-F100
MO
PROG
SEL
SCAN
F M
1
2
3
4
5
6
E X
A M
3
2
1
1
2
F
M
Select the FM1 band.
LOUD
POP
SOFT
BEAT
Tune into a station of 88.3 MHz.
See page 4 to tune into a station.
LOUD
POP
SOFT
BEAT
3
1
2
Press and hold the button for more than 1
second.
LOUD
POP
SOFT
BEAT
Preset number “1” flashes for a while.
4
Repeat the above procedure to store other stations into other
preset numbers.
Notes:
• A previously preset station is erased when a new station is stored in the same preset number.
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the stations again.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing your favorite stations into the one-touch
operation button (EX — extra)
You can preset an FM or AM station (such as your favorite station or traffic announcement
station); and recall it by one touch operation even if the unit is turned off.
EXAMPLE: Storing an FM station of 88.3 MHz into the one-touch operation button (EX)
/I
ATT
35WX4
DETACHABLE CONTROL PANEL
SOUND
LOUD
DISP
KS-F100
MO
PROG
SEL
SCAN
F M
1
2
3
4
5
6
E X
A M
1
2
1
1
2
Follow the steps 1 and 2 on page 5.
Press and hold the button for more than 1
E X
second.
“0” flashes on the display, showing that the station has been
preset.
LOUD
POP
SOFT
BEAT
Notes:
• A previously preset station is erased when a new station is stored.
• Preset station is erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the station again.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning into a preset station
You can easily tune into a preset station.
Remember that you must store stations first. If you have not stored them yet, see pages 5
and 6.
/I
ATT
35WX4
DETACHABLE CONTROL PANEL
SOUND
LOUD
DISP
KS-F100
MO
PROG
SEL
SCAN
F M
1
2
3
4
5
6
E X
A M
EX
1
2
1
2
A
M
F
M
FM1
FM3
FM2
AM
Select the band (FM1, FM2, FM3 orAM) you
want.
1
2
3
4
5
6
Select the number (1 – 6) for the preset station
you want.
To tune in the favorite station
The unit automatically turns on (if it has been off).
Your favorite station is tuned in — except when the tape is
E X
playing.
• If you press the button again, the last received station will be
tuned in.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Other convenient tuner functions
MO
/I
ATT
35WX4
DETACHABLE CONTROL PANEL
SOUND
KS-F100
MO
PROG
LOUD
DISP
SEL
SCAN
F M
1
2
3
4
5
6
E X
A M
SCAN
Scanning broadcast stations
When you press SCAN while listening to the radio, station scanning starts. Each time a
broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes
on the display), and you can check what program is now being broadcast.
If you want to listen to that program, press the same button again to stop scanning.
Selecting FM reception sound
When an FM stereo broadcast is hard to receive:
Press MO while listening to an FM stereo broadcast. The sound you hear becomes monaural
but reception will be improved.
Lights when receiving an
FM broadcast in stereo
LOUD
LOUD
MONO
STEREO
To restore the stereo effect, press the same button again.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TAPE OPERATIONS
Listening to a tape
2
3
/I
ATT
35WX4
1
DETACHABLE CONTROL PANEL
SOUND
LOUD
DISP
KS-F100
MO
PROG
SEL
SCAN
F M
1
2
3
4
5
6
E X
A M
/I
ATT
1
2
Turn on the power.
Insert a cassette.
When one side of the tape reaches its end during play, the
other side of the tape automatically starts playing. (Auto
Reverse)
3
Select the tape direction.
• Press the both buttons at the same time.
Each time you press the button, the tape direction changes
PROG
alternatively – forward (
) and reverse (
).
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette ejects from the cassette compartment.
You can hear the last received station.
• You can also eject the cassette with the unit turnd off.
To fast-wind a tape
Press either ¡ or 1.
The tape will be wound in the direction of the arrows
(¡ or 1).
To restart playback, press ¡ or 1 lightly.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND ADJUSTMENTS
Turning on/off the loudness function
The human ear is less sensitive to low and high frequencies at low volumes.
The loudness function can boost these frequencies to produce a well-balanced sound at low
volume levels.
Each time you press LOUD, the loudness function turns on/off alternatively.
LOUD
LOUD
Selecting preset sound modes
You can select a preset sound adjustment suitable to the music genre.
Each time you press SOUND, the sound mode changes as follows.
SOUND
Indication
For:
Preset values
Bass
00
Treble
00
Loudness
SCM OFF
BEAT
(Flat sound)
On
On
Off
Off
Rock or disco music
Quiet background music
Light music
+2
00
SOFT
+1
–3
POP
+4
+1
Notes:
• You can adjust the preset sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments”
on page 12.
• To adjust only the bass and treble reinforcement levels to your preference, see “Adjusting the sound”
on page 11.
• When one of the sound modes is selected, it is shown on the display as follows:
LOUD
POP
SOFT
BEAT
For example, when “POP” is selected.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound
You can adjust the treble/bass sound and the speaker balance.
/I
ATT
35WX4
DETACHABLE CONTROL PANEL
SOUND
LOUD
DISP
KS-F100
MO
PROG
SEL
SCAN
F M
1
2
3
4
5
6
E X
A M
2
1
1
SEL
Select the item you want to adjust.
Indication
To do:
Range
BAS
Adjust the bass
–6 (min.) — +6 (max.)
(bass)
TRE
Adjust the treble
–6 (min.) — +6 (max.)
(treble)
FAD
(Fader)*
Adjust the front and rear speaker
balance
R6 (rear only) — F6 (front only)
L6 (left only) — R6 (right only)
00 (min.) — 50 (max.)
BAL
Adjust the left and right speaker
(Balance) balance
VOL
Adjust the volume
(Volume)
Note:
* If you are using a two-speaker system, set the fader level to “00” (center).
2
Adjust the level.
Note:
Normally the + and – buttons work as the volume control buttons.
So you do not have to select “VOL” to adjust the volume level.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP: see page 10) to your preference and
store your own adjustments in memory.
1, 4
/I
ATT
35WX4
DETACHABLE CONTROL PANEL
SOUND
LOUD
DISP
KS-F100
MO
PROG
SEL
SCAN
F M
1
2
3
4
5
6
E X
A M
3
2
2
SOUND
1
2
Call up the sound mode you want to adjust.
See page 10 for details.
Within
5 seconds
SEL
To adjust the bass or treble sound level
Select “BAS” or “TRE.”
To turn on or off the loudness function
Each time you press LOUD, the loudness function turns on
and off alternatively. (= go to step 4)
LOUD
Within
5 seconds
3
4
5
Adjust the bass or treble level.
See page 11 for details.
Within
5 seconds
Press and hold SOUND until the sound mode
you have selected in step 1 flashes on the
display.
Your setting is stored in memory.
SOUND
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 10.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER MAIN FUNCTIONS
Setting the clock
/I
ATT
35WX4
DETACHABLE CONTROL PANEL
SOUND
LOUD
DISP
KS-F100
MO
PROG
SEL
SCAN
F M
1
2
3
4
5
6
E X
A M
1
2, 3
4
1
2
SEL
Press and hold the button for more than 2
seconds.
“CLOCK H” or “CLOCK M” appears on the display.
1.
1.
Set the hour.
1. Select “CLOCK H” if not shown on the
display.
2.
2. Adjust the hour.
3
Set the minute.
1. Select “CLOCK M.”
2.
2. Adjust the minute.
Start the clock.
DISP
4
To check the current clock time (changing the display mode)
Press DISP repeatedly. Each time you press the button, the display mode changes as follows.
During tuner operation:
During tape operation:
Clock
Frequency
Clock
Play mode
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Detaching the control panel
You can detach the control panel when leaving the car.
When detaching or attaching the control panel, be careful not to damage the connectors on
the back of the control panel and on the panel holder.
How to detach the control
panel
How to attach the control
panel
Before detaching the control panel, be sure
to turn off the power.
1
Insert the left side of the
control panel into the groove
on the panel holder.
1
Unlock the control panel.
2
2
Lift and pull the control panel
out of the unit.
Press the right side of the
control panel to fix it to the
panel holder.
Note on cleaning the connectors:
If you frequently detach the control panel, the
connectors will deteriorate.
To minimize this possibility, periodically wipe
the connectors with a cotton swab or cloth
moistened with alcohol, being careful not to
damage the connectors.
Connectors
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
To extend the lifetime of the unit
This unit requires very little attention, but you will be able to extend the life of the unit if you
follow the instructions below.
To clean the heads
• Clean the heads after every 10 hours of use
using a wet-type head cleaning tape (available
at an audio store).
When the head becomes dirty, you may realize
the following symptoms:
– Sound quality is reduced.
– Sound level decreases.
– Sound drops out.
• Do not play dirty or dusty tapes.
• Do not touch the highly-polished head with any
metallic or magnetic tools.
To keep the tape clean
• Always store the tapes to their storage cases
after use.
• Do not store tapes in the following places:
– Subject to direct sunlight
– With high humidity
– At extremely hot temperatures
CAUTIONS:
• Do not play the tapes with peeling labels; otherwise, they can damage the unit.
• Tighten tapes to remove slack since loose tape may become entangled with the mechanism.
• Do not leave a cassette in the cassette compartment after use, as the tape may become slack.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a
service center.
Symptoms
Causes
Remedies
• A cassette tape cannot be
inserted.
You have tried to insert a
cassette in the wrong way.
Insert the cassette with the
exposed tape facing right.
• Cassette tapes become hot. This is not a malfunction.
• Tape sound is at very low
level and sound quality is
degraded.
The tape head is dirty.
Clean it with a head cleaning
tape.
• Sound is sometimes
interrupted.
Connections are not good.
Check the cords and
connections.
• Sound cannot be heard from The volume control is turned
Adjust it to the optimum level.
the speakers.
to the minimum level.
Connections are incorrect.
Check the cords and
connections.
• Static noise while listening
to the radio.
The antenna is not connected
firmly.
Connect the antenna firmly.
• The unit does not work at
all.
The built-in microcomputer
may function incorrectly due to
noise, etc.
While holding SEL, press
ATT for more than 2 seconds
to reset the unit. (The clock
setting and preset stations
stored in memory are erased.)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
AUDIO AMPLIFIER SECTION
CASSETTE DECK SECTION
Wow & Flutter: 0.15% (WRMS)
Fast-Wind Time: 190 sec. (C-60)
Frequency Response:
Maximum Power Output:
Front: 35 watts per channel
Rear: 35 watts per channel
Continuous Power Output (RMS):
50 to 14,000 Hz (± 3dB)
Front: 15 watts per channel into 4 Ω, 40 Signal-to-Noise Ratio: 52 dB
to 20,000 Hz at no more than 0.8% Stereo Separation: 40 dB
total harmonic distortion.
Rear: 15 watts per channel into 4 Ω, 40
GENERAL
to 20,000 Hz at no more than 0.8%
total harmonic distortion.
Power Requirement
Operating Voltage: DC 14.4 volts (11 to 16
volts allowance)
Grounding System: Negative ground
Dimensions (W x H x D)
Load Impedance: 4 Ω (4 to 8 Ω allowance)
Tone Control Range
Bass: ±10 dB at 100 Hz
Treble:±10 dB at 10 kHz
Installation Size:
Frequency Response: 40 to 20,000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance: 1.0 V/20 kΩ load
(250 nWb/m)
182 x 52 x 150 mm
Panel Size: 188 x 58 x 14 mm
Mass: 1.3 kg (excluding accessories)
Design and specifications subject to change
without notice.
TUNER SECTION
Frequency Range
FM: 87.5 to 108.0 MHz
AM: (MW) 522 to 1,620 kHz
(LW) 144 to 279 kHz
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 to 15,000 Hz
Stereo Separation: 30 dB
Capture Ratio: 2.0 dB
[MW Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
[LW Tuner]
Sensitivity: 50 µV
17
Download from Www.Somanuals.com. All Manuals Search And Download.
|