VIDEO CD PLAYER
XL-MV3 5 TN
VCD POWER
DISC
1
DISC
2
2
DISC
3
3
TV POWER
1
5
9
4
8
6
7
10
+10
ON SCREEN
B.SEARCH
PROGRAM
CANCEL
B.MARK
PlayBack Control
VIDEO CD VERSION 2.0
VIDEO
INTRO
BOOK
MPX
HIGHLIGHT
XL-MV35 VIDEO CD PLAYER
KEY CONTROL
DIGEST
V.REPLACE
1
2
7
3
4
9
5
RANDOM
REPEAT
SLOW
V.MASKING
DOWN
NORMAL
UP
STANDBY
POWER
SELECT
6
8
10
KARAOKE NORMAL PBC OFF
STOP
SPATIALIZER
MPX
+10
3
DISC
PROGRAM
TV/VIDEO
TV
TV VOL+
TV
PROG
+
TRIPLE TRAY
SPATIALIZER PROG
–
MIC
1
MIC
2
MIC
3
RETURN
SELECT
DIGITAL ECHO
SHIFT
b
#
TV VOL–
VIDEO INTRO
BOCK DIGEST
KEY CONTROL
BCOKMARK
B.SEARCH
PREV
NEXT
MIN
MAX
RM-SXMV55U
MULTI BRAND REMOTE CONTROL
MIN
KEY CONTROL
MAX
MIN
MAX
MIN
MAX
PHONES
STILL
DESIGNED BY JVC
VIDEO CD
NTSC/PAL COMPATIBILITY
COMPACT
'
PlayBack
Control
'
GRAPHICS
DIGITAL VIDEO
For Customer Use:
Enter below the Model No. and Serial No.
which are located either on the rear, bottom or
side of the cabinet. Retain this information for
future reference.
INSTRUCTIONS
Model No.
Serial No.
LVT0023-001A
[ U, UF ]
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT FOR LASER PRODUCTS
LABELS
1
CLASSIFICATION LABEL PLACED ON REAR ENCLOSURE
2
WARNING LABEL PLACED INSIDE THE UNIT
DANGER: Invisible laser
radiation when open and
interlock failed or defeated.
AVOID DIRECT EXPOSURE
VARNING: Osynlig laser-
strålning när denna del är
öppnad och spärren är
urkopplad.
strålen.
Betrakta
ej
(s)
TO BEAM.
(e)
CLASS
LASER
1
PRODUCT
ADVARSEL: Usynlig laser-
stråling ved åbning, når
sikkerhedsafbrydere er ude
af funktion. Undgå udsæt-
VARO: Avattaessa ja suo-
jalukitus ohitettaessa olet
alttiina
lasersäteilylle. Älä katso
säteeseen. (f)
näkymättömälle
telse for stråling
(d)
1. CLASS 1 LASER PRODUCT
2. DANGER:Invisiblelaserradiationwhenopenandinterlockfailedor
defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user service-
able parts inside the Unit; leave all servicing to qualified service
personnel.
G-2
Download from Www.Somanuals.com. All Manuals Search And Download.
We would like to thank you for purchasing one of our JVC products.
Before connecting this unit to the wall outlet, read the instructions
carefully to ensure that you obtain the best possible performance. If
you have any questions, consult your JVC dealer.
Table of contents
GENERAL INFORMATION ............................................................ 1
Care and handling of compact discs ............................................... 1
BEFORE USING FOR THE FIRST TIME ....................................... 2
Basic connections ........................................................................... 2
Connecting player to a TV or amplifier
using the audio video cord ......................................................... 2
Video out select ......................................................................... 2
Connecting the power cord ........................................................ 2
Installing batteries ........................................................................... 3
Putting batteries in the remote control ....................................... 3
OVERVIEW OF CONTROLS ......................................................... 4
Left front panel of the Player ...................................................... 4
Center front panel of the Player ................................................. 4
Right front panel of the Player ................................................... 4
Remote control unit .................................................................... 5
BASIC OPERATIONS .................................................................... 6
Now you can play a variety of video CDs!! ..................................... 6
Overview of the three modes ..................................................... 6
Triple disc tray usage ................................................................. 6
Display window .......................................................................... 6
Preparation for playing ............................................................... 7
Inserting/removing disc(s) .......................................................... 7
Starting to play disc(s) ............................................................... 7
Using number keys .................................................................... 7
Stopping play ............................................................................. 8
Pausing play .............................................................................. 8
Auto search/Manual search ....................................................... 8
Slow-motion playback on the remote control unit ...................... 8
Using stereo headphones .......................................................... 9
Using the remote control ................................................................. 9
Presetting the remote control to operate your own TV .............. 9
Using the SHIFT button on the remote control unit.................. 10
Preset code table ..................................................................... 10
VARIOUS UNIQUE FUNCTIONS................................................. 11
Various functions can enhance your enjoyment ........................... 11
Display of operations status..................................................... 11
Programming the track sequence you want............................. 11
Canceling a programmed track ................................................ 11
Clearing a program .................................................................. 11
Repeating tracks ...................................................................... 12
Randomly playing tracks .......................................................... 12
Playing a multiplex sound CD .................................................. 12
Viewing the VIDEO INTRO of a video CD ............................... 12
Programming during VIDEO INTRO ........................................ 13
Viewing the highlights of a video CD ....................................... 13
Selecting the SPATIALIZER mode .......................................... 13
Playback with the bookmark function............................................ 14
Making segments for later viewing with the bookmark function 14
Using the BOOKMARK DIGEST button................................... 14
Using the BOOKMARK SEARCH button ................................. 14
Canceling individual bookmarks .............................................. 14
Canceling all bookmarks on individual discs............................ 15
Using a microphone ...................................................................... 15
Using a wired microphone ....................................................... 15
Adjusting music key ................................................................. 16
Adjusting echo effect................................................................ 16
Vocal replace ........................................................................... 17
Vocal masking.......................................................................... 17
OPERATION OF PLAYBACK CONTROL FUNCTION ............... 18
Playing Video CDs with Playback Control function ....................... 18
Video CDs with Playback Control function............................... 19
RESTRICTING USE OF YOUR DISCS ........................................ 20
Locking a disc with the Read-Protect function .............................. 20
Locking a disc .......................................................................... 20
Canceling Read-Protect ........................................................... 20
Canceling Read-Protect for a single viewing ........................... 20
GRAPHIC/DIGITAL AUDIO CDs ................................................. 21
Playing CD Graphics/digital audio CDs ........................................ 21
Playing CD Graphics................................................................ 21
Playing digital audio CDs ......................................................... 21
SPECIFICATIONS ........................................................................ 22
Main specifications ........................................................................ 22
TROUBLESHOOTING ................................................................. 23
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATION
Care and handling of
compact discs
How to handle CDs
Which compact discs can be used?
When handling a compact disc, do not touch the surface of the disc
(reflective silver side –– the side without the label).
Since compact discs are made of plastic, they are easily damaged. If
a disc gets dirty, dusty, scratched or warped, the sound will not be
picked up correctly and, in addition, such a disc may cause the CD
player to malfunction.
Many types of compact discs are sold for a variety of uses. The Video
CD Player can play the following compact discs:
COMPACT
•
Video CD
for audio and video (moving picture) reproduction,
including multiplex sound.
DIGITAL VIDEO
PlayBack
Control
•
Video CD with Playback Control function
featuring menu-type operation and super-fine still
pictures for audio and video (moving picture) re-
production, including multiplex sound.
•
•
CD Graphics (CD-G)
for audio and video (still picture) reproduction,
including multiplex sound.
'
GRAPHICS
Digital Audio CD
Care of the label side
including single discs
for audio reproduction.
Do not damage the label side, stick paper or use any adhesive on its
surface.
'
CDs you can't play back
Storage
Make sure that discs are kept in their cases. If discs are piled one on
topofanotherwithouttheirprotectivecases,theycanbedamaged. Do
notputdiscsinalocationwheretheymaybeexposedtodirectsunlight,
or in a place where the humidity or temperature is high. Avoid leaving
discs in your car!
Do not play back CD-ROMs, DVDs, or CD-is on this equipment. Doing
so may generate a noise which can damage your speakers.
Using the remote control
The remote control is ready to use when its batteries are installed
properly.
Maintenance of discs
If there are fingerprints or dirt adhering to a disc, wipe it with a soft dry
cloth, moving from the center outwards.
If a disc is difficult to clean, wipe with a cloth moistened with water.
Never use record cleaners, petrol, alcohol or any anti-static agents.
To use it, point its infrared light-emitting window toward the display
window of the player and press a button. The operating range of the
remote control is up to about seven meters in front of the player and
within about 30 degrees to each side –– with nothing between the
remote control and the player interrupting the beam path.
If pressing a button on the remote control does not produce any
response, check to make sure it is pointed correctly and try again. If it
still does not function, check the batteries.
CAUTION
Sometimes during play noise or images may be garbled. This is
sometimes due to the disc. (It may not be up to industry standards.)
These symptom are caused by the discs, not by the malfunction of
the Player.
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING FOR THE FIRST TIME
Basic connections
The Video CD Player must be connected directly to a television set or
an amplifier that is connected to a television or monitor. The television
set or the amplifier must have audio input jacks for right and left
channels and a video input jack.
Select a level, dry location free of dust and vibration, having a
temperature maintained between 5 and 35°C (41 and 95°F).
Notes
•
•
•
When you play an NTSC disc in PAL AUTO mode on a PAL
exclusive TV, the image may be distorted.
If the signal doesn’t synchronize, change the mode to “PAL”.
Select the mode before you play the disc. If you change the mode
during play, images may get distorted. In this situation stop the
player and reset the mode.
WhenyouplayanNTSCdiscinPALAUTOmodeonaMultisystem
TV, the image may blink for a moment. This symptom is caused by
the Player detecting the formula of the disc, not by a malfunction of
the Player.
Connecting the player to a TV or amplifier
using the Audio Video cord
First connect the Audio Video cord — before connecting the AC power
cord.
Firmly insert the yellow pin plug of the Audio Video cord in the yellow
VIDEO OUT jack on the rear panel of the player; the red pin plug in the
red AUDIO OUT (RIGHT) jack; and the white pin plug in the white
AUDIO OUT (LEFT) jack. (The RIGHT and LEFT output jacks are for
the right and left audio channels.)
Then make sure that the television, amplifier or receiver is turned off,
disconnect the AC power cord, and firmly insert the pin plugs at the
other end of the Audio Video cord into the matching video and audio
INPUT jacks.
Connecting the power cord
IMPORTANT (not applicable for China)
Check the setting of the LINE VOLTS switch on the rear panel of
*
the player.
Change the setting if the switch is not set for the main voltage
supplied to your home.
After the audio-video connectors had been connected, insert the
female end of the power cord firmly into the AC POWER CORD
socket located on the rear panel of the player. Then insert the male
end of the power cord into the wall outlet.
AUDIO OUT
When the power cord is connected, the STANDBY indicator on the
left-hand side of the player’s front panel comes on. [See “overview
of Controls” for a description of the controls on the player.]
RIGHT
LEFT
VIDEO
OUT
VIDEO OUT SELECT
PAL
NTSC
PAL AUTO
LINE VOLTS
220V-240V
115V-127V
AC POWER CORD
Audio Video cord
(Yellow)(Red) (White)
To input audio jack of
the television/amplifier/
receiver
To input video jack of
the television/amplifier/
receiver
AC power cord
Wall outlet
Video out select
Set the VIDEO OUT SELECT switch on the rear panel to NTSC, PAL,
or PAL AUTO mode according to your television system.
NTSC .................... for NTSC exclusive TV
PAL ....................... for PAL exclusive TV
PAL AUTO ............ for Multisystem TV
PALAUTOdetectstheformulaofthedisc(NTSC/
PAL) automatically and plays the image on the
screen correctly.
Page 2
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING FOR THE FIRST TIME
Installing batteries
•
Removebatteriesfromtheremotecontrolifitisnotgoingtobeused
for a long period of time.
Putting batteries in the remote control
•
•
Remove dead batteries and dispose of them properly.
Never leave dead batteries lying around, take them apart, mix them
with other refuse, or throw them into an incinerator.
Never touch liquid that has leaked out of a battery.
Do not mix new and old batteries, or batteries of different types,
when replacing them.
The battery compartment is located on the back of the remote control.
1. Insert a finger in the recess under the battery compartment
cover, and pull off the cover.
•
•
2. Place the two accessory R6P (SUM-3)/AA (15F) batteries in
the remote control according to the polarity markings (“+” and
“–”) inside the compartment and on the batteries.
3. Insert the two tabs of the cover in their respective slots, and
snap the cover in place.
The batteries last about one year with normal use. If function of the
remote control become erratic, replace the batteries.
Precautions for the safe use of batteries
Observe the following precautions for the safe use of batteries. Their
life will be shortened, they may burst or their contents may leak if they
are used improperly.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW OF CONTROLS
The following is an explanation of the the basic function of controls
on the front panel of the Player and the remote control. The function
of some controls may be restricted in actual use depending on the
on-going operations. The remote control has twelve (12) unique
function buttons in addition to those on the player.
XL-MV35 VIDEO CD PLAYER
KEY CONTROL
2
12
1
DOWN
NORMAL
UP
STANDBY
POWER
3
KARAOKE NORMAL PBC OFF
SPATIALIZER
MPX
DISC
3
4
5
MIC 2
6
TRIPLE TRAY
MIC 1
MIC 3
DIGITAL ECHO
16
7
BOOK DIGEST
VIDEO INTRO
14
S
PREV
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
13
15
8
PHONES
KEY CONTROL
22
23
VIDEO CD
NTSC/PAL COMPATIBILITY
10
9
11
24
Left front panel of the Player
VIDEO INTRO button (R)
13
(Controls marked (R) have equivalents on the remote control.)
Applies to video CDs only. The introductory five (5) seconds of
tracksonavideoCDaredisplayedonthetelevisionscreeninorder
to present the contents of the video CD.
Display window
Shows information about the status of operation.
BOOK DIGEST button (R)
1
POWER button (R)
Turns the power on and off.
14
15
2
STANDBY indicator (Red)
Lights when the power cord is connected and the power is turned
off. The STANDBY indicator is not lit when the player is turned on.
KEY CONTROL button (R)
Displays video segments you marked with the Bookmark function.
(See page 14.)
3
Transposes the music key.
DOWN button: used to flatten by a half tone.
NORMAL button: returns to original key tone.
Right front panel of the Player
UP # button:
used to sharpen by a half tone.
4
0 (OPEN/CLOSE) buttons (Disc number 1 to 3)
16
MODE switch
Switches the KARAOKE/NORMAL/PBC OFF mode.
KARAOKE mode: one track playing mode.
Used to open and close disc trays 1 to 3 respectively. When, after
opening the DISC1 tray, another 0 (OPEN/CLOSE) button is
pressed, the DISC1 tray is first closed, then the other DISC tray
selected is opened.
NORMAL mode:
continuous plural tracks playing mode. Re-
quired also for the Playback Control (PBC)
function.
17
DISC1 through DISC3 buttons with indicators (Green) (R)
Plays the disc of the number indicated on the button. As soon as
the disc begins playing, the indicator blinks.
Number keys (1 to 10) (R)
PBC OFF mode: inhibits the Playback Control (PBC) function
of the video CD.
SPATIALIZER button (R)
18
5
6
Used to specify a track number for playing, changing, or program-
ming. To operate numbers above ten (10), press the +10 button
once. The number keys (1 to 10) are then assigned the numbers
11 to 20 instead of 1 to 10. The maximum key number assignment
is 99. In PBC function operation, the number keys are additionally
utilized for the selection of menu items. See page 18 “Operation of
Playback Control function”.
Changes the sound mode. (See page 13.)
MPX button (R)
Activates the multiplex function, which switches to NORMAL
(stereo), L-ch monaural and R-ch monaural.
DIGITAL ECHO knob
Adjusts the degree of the echo effect for the microphone voice (1
through 3).
MIC1 to MIC3 knobs
Adjusts volume of the microphone corresponding to MIC number.
PHONE jack
7
19
PROGRAM button (R)
8
9
Any desired sequence of tracks can be programmed with the
number keys and the +10 button. (On the remote control use +10)
The program button cannot be used while the Playback Control
function is activated.
Used for connecting stereo headphones. The volume is set to a
predetermined level and is not adjustable.
+10 button (R)
20
10 KEY CONTROL jack
Used to shift the numbers assigned to the number keys to 11 or
higher (maximum 99).
RETURN button (R)
Utilized for operation with the PBC function. This button is used to
Used for connecting a microphone with key control function.
11 MIC jacks (1 through 3)
21
Used for connecting microphones (1 through 3). The jacks corre-
spond to MIC 1 to 3 volume knobs located above.
return to a menu screen during play.
4 / ¢ PREV / NEXT buttons (R)
22
Center front panel of the Player
During operation with the Playback Control function
Invokes previous or next screen.
DISC1 to DISC3 trays
12
Used to load discs. To insert/remove one or up to three (3) discs,
press the 0 OPEN/CLOSE button located at the right of the tray
corresponding to disc number.
During operation without the Playback Control function
Skipsforwardorbackwardquicklyfromcurrenttrackbeingplayed.
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW OF CONTROLS
The controls with identical names on the Player and on the remote
control have the same function and are used in the same manner.
VCD POWER
TV POWER
DISC 1
DISC 2
DISC 3
29
PlayBack Control
VIDEO CD VERSION 2.0
1
2
6
3
4
8
1
2
7
3
18
4
9
5
5
9
7
6
8
10
10
+10
B.MARK
ON SCREEN
B.SEARCH
+10
PROGRAM 19
20
30
PROGRAM
CANCEL
RETURN
ELECT
21
17
31
32
33
VIDEO
INTRO
BOOK
DIGEST
MPX
HIGHLIGHT
V.REPLACE
BOOKMARK
B.SEARCH
26
NEXT
RANDOM
REPEAT
SLOW
V.MASKING
34
35
27
3
STILL
DESIGNED BY JVC
SELECT
25
STOP
28
36
39
TV/VIDEO
TV
TV VOL+
TV
PROG
+
SPATIALIZER PROG
–
SHIFT
b
#
3 SELECT (PLAY) button (R)
23
40
37
TV VOL–
Starts to play the disc with/without the Playback Control function.
7 (STOP) button (R)
KEY CONTROL
24
25
38
Stops play.
8 STILL (PAUSE) button (R)
Temporarily suspends playing. Video motion freezes and audio
reproduction stops. Pressing the button repeatedly advances the
picture frame-by-frame. (Video CD only)
BOOKMARK button (R)
RM-SXMV55U
MULTI BRAND REMOTE CONTROL
26
Places a “bookmark” at video segments you want to find later for
almost instant replay. (See page 14.)
27 B. SEARCH button (R)
Retrieves video segments which you marked with a bookmark.
(See page 14.)
28 Jog/Shuttle dial
Used for fast-forward, fast rewind, and still play.
Remote control unit
29
VCD POWER/TV POWER button
Turns the player on and off.
When pressed after you hold down the SHIFT button, turns the TV
on or off.
ON SCREEN button
Controls whether or not control and operation status are displayed
on the television screen or monitor.
CANCEL button
Cancels the latest track you have programmed. The latest pro-
grammed track is canceled whenever you press this button. Also
used to cancel a bookmark.
35
36
SLOW/V.MASKING button
Starts slow-motion playback.
30
WhenpressedafteryouholddowntheSHIFTbutton, activatesthe
voice masking function, playing the music with low-level vocals.
1 / ¡ MANUAL SEARCH button
Shifts the playing location backward and forward quickly. Holding
down the button causes it to go much faster.
31
37 TV/VIDEO/SPATIALIZER button
HIGHLIGHT button
32
Used to preset the remote control unit, to control some functions
on your TV set. (See page 10.)
When pressed after you hold down the SHIFT button, changes the
sound ambiance. (See page 13.)
SHIFT button
Applies to a video CD to see highlights of a track. Displays the first
(5) seconds of each of nine (9) equal-time segments of the track.
33 MPX/V.REPLACE button
Activates the multiplex function. (See page 12)
WhenpressedafteryouholddowntheSHIFTbutton, activatesthe
vocal replace function, inserting your voice in place of the disc
vocals.
38
Usedtogetherwithotherkeysforvariousfunctions. (Seepage10)
TV VOL + / TV VOL – keys
39
Turns the TV volume up or down.
RANDOM/REPEAT button
34
Changes the disc track program to a random sequence from disc
1 through 3 respectively.
40 TV PROG – / TV PROG + / KEY CONTROL
Changes the television channel.
When pressed after you hold down the SHIFT button, repeats a
track or inserted discs from 1 to 3.
When pressed after you hold down the SHIFT button, changes the
key in which the music plays. (See page 16.)
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Now you can play a
variety of video CDs!!
Overview of the three modes
Display window
ThisPlayerhasthree(3)modes: KARAOKE,NORMAL,andPBCOFF
mode. These are selected by the MODE switch. This permits various
ways of playing a video CD.
The display window indicates many aspects of control and operation
status.
4
KARAOKE NORMAL PBC OFF
KARAOKE mode: One track playing mode. Whenever one track has
completed play, the Player stops.
NORMAL mode: Continuous plural track playing mode. The Player
plays tracks continuously in the order they appear
on the disc.
PBC OFF mode: This mode is identical to the NORMAL mode,
except that the PBC function is inhibited.
1
2
5
3
1
Shows the disc number being played.
Showsmainlythetotalnumberoftracksandthetracknumberbeing
played.
2
3
4
5
Shows mainly the cumulative time (minutes and seconds) of the
track. Afterward, total time of the disc is displayed.
The combination of VCD, PBC, and CD-G indicators shows the
type of disc being played.
Each indicator in this area lights when the corresponding function
is activated.
To set the mode, move the MODE switch on the left side of the front
panel.
Triple disc tray usage
Up to three (3) discs can be loaded in the Player. You may insert a disc
into any of the disc trays 1 through 3.
If you want to play only a specified disc, press the corresponding disc
1, 2 or 3 button located to the right of the 0 (OPEN/CLOSE) button.
When three discs are inserted, basic order of playing is as follows.
•
•
•
Pressing DISC 1: DISC 1 → DISC 2 → DISC 3 → STOP
Pressing DISC 2: DISC 2 → DISC 3 → DISC 1 → STOP
Pressing DISC 3: DISC 3 → DISC 1 → DISC 2 → STOP
3
DISC
TRIPLE TRAY
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Preparation for playing
Starting to play disc(s)
Turnonthetelevisionset,amplifierorreceivertowhichthePlayer
is connected. Then select the proper channel and mode to
operate the Player, and set the sound volume to a reasonable
level.
Pressthe3SELECT(PLAY)button. ThePlayerstartstoplayfrom
the disc indicated in the display window.
PressoneoftheDISC1through3buttonsandthePlayerplaysthe
disc you pressed, from the 1st track. For individual track selec-
tion, use the number keys or the 4/ ¢ PREV/NEXT buttons.
Press the POWER button on the front panel or remote control.
ON/STANDBY
SELECT
STANDBY
POWER
or
The STANDBY indicator
goes out.
The display window shows the initial information as shown below.
When you start play, the Display window shows the disc number and
the track number being played.
During play, the indicator on the DISC button blinks.
If the PBC function is activated, the display window shows “Pb” until
youplayatrack,andthetelevisionscreenshowstheinitialmenu,DISC
number, and “PBC”. See page 18, “Operation of Playback Control
function”.
When you press 3 SELECT button during play, the disc will restart
from the beginning of the track except when the PBC function is
activated.
Easy start up
Without pressing the POWER button you can start up the Player by
pressing 3 SELECT button or disc buttons.
Using number keys
Inserting/removing disc(s)
Press the number keys to select numbers.
Press the 0 (OPEN/CLOSE) button (1 through 3) to open the disc
tray. Then place the disc in the round recess of the tray with label
side up. To close the tray, press the 0 (OPEN/CLOSE) button
again.
On the Player .................... 1 to 10 and +10 key
Example: For number 5, press 5. For number 15, press +10, then 5.
For number 20, press +10 button, then 10. For number 32, press +10
three times, then 2.
If you press the 0 (OPEN/CLOSE) button of the disc which is playing,
the Player stops and then opens the tray.
If you press the 0 (OPEN/CLOSE) button of a disc that is not being
played, you can change discs without stopping play.
1
6
2
7
3
8
4
9
5
10
+10
On the remote control ..... 1 to 10 and +10 key
Select numbers as described above.
1
5
9
2
6
3
7
4
8
Note
•
When loading a disc in the disc tray, be sure to position the disc
inside the recess. Otherwise, the disc will be damaged when the
disc tray is closed, and the disc cannot be removed from the unit.
10
+10
CD
Note
•
Whenyoupressthenumberkeys, thetrackwillstartplayingwithout
Tray
pressing 3 SELECT button.
CORRECT
INCORRECT
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Rotating the shuttle dial to the right causes the disc to fast
forward. Rotating it to the left causes it to fast reverse.
Stopping play
Press the 7 (STOP) button to stop play at any time.
STILL
BCOKMARK
B.SEARCH
Pausing play
Press the 8 STILL (PAUSE) button to temporarily suspend play.
STILL
On the remote control, holding down the 1/¡ buttons causes
the disc to fast forward or reverse.
Continuing to hold down the buttons causes it to search much
faster.
2-1
1:30
Notes
B 3 3 – – – E M.SEARCH
•
When the 8 STILL (PAUSE) button is pressed once, “PAUSE”
appears on the television screen, the video motion freezes and the
sound is turned off. The still picture advances frame-by-frame each
time the 8 STILL (PAUSE) button is pressed, or the shuttle dial is
rotated to the right. This frame-by-frame function is effective only
for video CDs.
(Remote control)
(Television screen)
•
•
To release the pause, press the 3 SELECT or blinking DISC 1
through 3 button.
During “PAUSE” the time counter on the display will blink.
Note
•
In some circumstances, this function is not available when the PBC
function is activated.
•
The angle at which you hold the shuttle dial determines the manual
search speed.
Auto search/Manual search
On the Player, during play, pressing the 4 button once causes
the Player to replay the current track from the beginning. Press-
ingthe¢ buttononcecausesthePlayertoskiptothenexttrack.
The current position on the disc is displayed on the television
screen.
Slow-motion playback on the remote
control unit
Press the SLOW/V.MASKING button to play in slow-motion. By
pressing the SLOW/V.MASKING button consecutively, the play-
back speeds are cycled as shown below.
PREV
NEXT
SLOW
V.MASKING
or
(Remote control)
1/4
1/8
1/16
Normal
Note
This function can only be used when playing a Video CD.
•
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Using the remote control
Using stereo headphones
Presetting the remote control to operate
your own TV
Connecting stereo headphones
Connect stereo headphones to the PHONES jack at the lower-left of
the front panel. The volume level is fixed and cannot be adjusted.
You can use the Player’s remote control unit to control some functions
on your TV set (e.g., turning the TV on and off, adjusting volume, or
selecting channels). First, though, you must preset the remote control
to make it compatible with your TV.
PHONES
Operation
1. Check the Preset Code Table (page 10) to determine the two-
digit brand code number for your TV.
2. WhileholdingdowntheTV/VIDEO/SPATIALIZERbuttononthe
remote control, press the Number keys to insert the two-digit
brand code number. (For example, if the code number is "28",
press Number key 2, then 8. If the first digit is a "0", press 10.
Thus, if the code number is "09", press Number key 10, then 9.
If the code number is "10", press Number key 1, then 10. If it
is "20", press Number key 2, then 10.)
Notes
•
Before the remote control unit leaves the factory, the brand code
number is set as No. 01 (JVC).
•
Depending on your television set’s age and other factors, brand
code numbers may be different from those shown in the table. In
such a case, try out other codes until you find one that corresponds
to your television.
3. While still holding down the TV/VIDEO/SPATIALIZER button,
press the STOP button on the remote control.
TV/VIDEO
SPATIALIZER
STOP
+
4. The TV is turned off if the code number is correct. Repeat the
procedure from the beginning if you weren’t successful the
first time.
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Using the SHIFT button on the remote
control unit
Preset code table
You can control other functions with the remote control, simply by
holding down the SHIFT button while pressing another button. Some
of these functions are useful for Karaoke and Video CD playing, others
for controlling the TV.
No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Television manufacturer
JVC
PANASONIC
SHIFT
SONY
SHARP
7 SHIFT button functions for Karaoke and Video CD playing
SHIFT + MPX ⇒ VOCAL REPLACE
TOSHIBA/BEIJING/CHANGHONG
MITSUBISHI/CHANGHONG
HITACHI
SHIFT + RANDOM ⇒ REPEAT
Push RANDOM several times to toggle the repeat function:
ALL DISC → 1 TRACK → OFF
SANYO
SHIFT + SLOW ⇒ VOCAL MASKING
FUNAI
AIWA
SHIFT + TV/VIDEO ⇒ SPATIALIZER
Push TV/VIDEO several times to toggle the SPATIALIZER func-
tion:
DAEOO
SPATIALIZER H → SPATIALIZER L → OFF
SAMSUNG
LG (GOLDSTAR)
THOMSON
FERGUSON
PHILIPS/TCL/CHANGHONG
GRUNDIG
SHIFT + TV PROG – ⇒ KEY CONTROL ( )
SHIFT + TV PROG + ⇒ KEY CONTROL (#)
7 SHIFT button functions to control the TV
SHIFT + VCD POWER ⇒ Turns the TV on and off
SHIFT + 1 ⇒ TV Channel 1
ITT
SHIFT + 2 ⇒ TV Channel 2
•
•
•
MIVER
SHIFT + 10 ⇒ TV Channel 0*
FINLUX
SHIFT + ON SCREEN⇒ 1 - (The first digit of a TV Channel number
10 to 19. Push a Number key to insert the second digit.)*
NOKIA
NEC
SHIFT + B.SEARCH ⇒ 2 - (The first digit of a TV Channel number
20 to 29. Push a Number key to insert the second digit.)*
JINXING/PEONY1
PEONY2
SHIFT + +10 ⇒ -/- - (To change a one - digit or to change a two -
digit TV channel number, using a Number key.)*
PEONY3/CHANGHONG
KONKA
SHIFT + B.MARK ⇒ ENTER (Push after choosing a channel. This
function registers the channel you have chosen.)*
PEIJIN/NOBLEX
TCL
Note
•
The asterisk * indicates that these operations do not work for some
manufacturers’ television sets.
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS UNIQUE FUNCTIONS
Various functions can
enhance your enjoyment
Display of operations status
Canceling a programmed track
Preparation
Operation
This function is controlled by the remote control.
There are three (3) canceling functions (canceling the last pro-
grammed track, canceling the current track, canceling the next
track to be played).
Operation
Press the ON SCREEN button on the remote control. By pressing
the ON SCREEN button, the following information may be easily
and quickly displayed or removed from the television screen.
•
To cancel the last programmed track press the CANCEL
button on the remote control and the last programmed track
will be canceled. This can be done while a disc is playing.
Time, Echo effect, Key control, Program, Repeat, Random, Multiplex-
ing, Vocal replace, Vocal masking, Bookmark, etc.
PROGRAMMED SONGS
2-1
2-2
2-3
2-4
2-5
3-1
1-1
1-2
1-3
PROGRAMMED SONGS
The number located lowest is the
last track programmed.
2-1
1:30
ON SCREEN
(Television screen)
(Remote control)
•
•
To cancel the current track press 7 STOP button.
(Television screen)
To cancel the next track, wait until the current track has
finished and press the ¢ button and the next track will be
canceled and the unit will go to the next programmed track.
Programming the track sequence you want
Note
To verify the tracks you programmed, stop the Player and see ON
SCREEN information
•
Preparation
It is not possible to enter programming mode during play. If playing,
stop the player with the 7 STOP button.
Operation
1. Press the PROGRAM button to enter the programming mode.
PROGRAM is displayed in the Display Window.
Clearing a program
PROGRAM
To delete all programmed tracks you have entered, press the 7
STOP button and then the PROGRAM button. “PROG OFF” will
be displayed on the television screen.
STILL
PROGRAM
2. Specify the disc by the DISC (1 through 3) button and then the
track by the number keys successively. You can program up
to nine (9) tracks by repeating this procedure.
Note
•
3. To play the programmed tracks press the 3 SELECT button.
The Player does not cancel the track program even if the 7 (STOP)
button is pressed. Pressing the 3 SELECT (PLAY) button again
causes the Player to resume playing from the next track.
Notes
•
The track number playing, next track programmed, and number of
programmed tracks are displayed from the left-top of the television
screen. You may use the ON SCREEN button to delete this
information.
•
•
Once the programmed track is played, it is deleted from the
program.
You may continue to program even while the disc is playing.
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS UNIQUE FUNCTIONS
3. To cancel random playing, after stopping the Player (7 STOP
Repeating tracks
button), press the RANDOM/REPEAT button again.
STILL
It is possible to repeat all discs or only a single track.
RANDOM
REPEAT
Preparation
This function is controlled by the remote control.
(Remote control)
Operation
Note
•
Hold down the SHIFT button while you press the RANDOM/
REPEAT button on the remote control. Channel REPEAT modes
are cycled as shown below.
Random is not effective in program or KARAOKE mode.
RANDOM
REPEAT
→All discs
Playing a multiplex sound CD
→1 track
This function is used for multiplex sound discs.
(Remote control)
(Display window)
Operation
By pressing the MPX button consecutively, channel multiplexing
modes are cycled as shown below.
REPEAT ALL
(All discs)
REPEAT1
(1 track)
REPEAT OFF
MPX
(Television screen)
Notes
•
•
•
•
•
When playing a programmed sequence of tracks, only one track
repeat is available.
Only REPEAT1 and REPEAT OFF are available in KARAOKE
mode.
The Repeat function is not available when the player is set to PBC
ON.
Only REPEAT ALL is available when the player is in RANDOM
mode.
You cannot repeat the segment between bookmarks.
NORMAL
L-CH MONO
R-CH MONO
(left-channel/
right-channel)
(Television screen)
Viewing the VIDEO INTRO of a video CD
Preparation
When you play a video CD with the Playback Control function, the
mode switch should be in the PBC OFF mode or KARAOKE mode.
Randomly playing tracks
Preparations
Operation
•
•
This function is controlled by the remote control.
The RANDOM button is effective only in NORMAL or PBC OFF
mode.
1. Play the disc you want to see a digest of.
2. Press the VIDEO INTRO button on the Player or the remote
control just after starting disc play. Then the Player starts to
display in sequence the first five (5) seconds and track num-
bers of all tracks on the disc.
•
This function plays tracks randomly from one disc.
Operation
1. Stop the Player.
VIDEO
INTRO
2. Press the RANDOM/REPEAT button and random playing will
start.
RANDOM
REPEAT
3. To select a track during digest display, press the number key
corresponding to the item number on the television screen.
(Remote control)
VIDEO INTRO
1
4
7
2
5
8
3
6
9
(Television screen)
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS UNIQUE FUNCTIONS
Programming during VIDEO INTRO
Selecting the SPATIALIZER mode
Operation
1. Stop play.
Youcanchangethesoundambianceandenjoyadifferentsoundusing
the Spatializer function.
2. Press the PROGRAM button so that PROGRAM is lit in the
display.
3. Press the disc button you want to play, and enter 1 on the
number keys.
Operation
1. Choose one of the following two sound modes to change the
sound ambiance.
4. Pressthe3 SELECTbuttonandthen,afterthedischasstarted
to play, press the VIDEO INTRO button.
5. The Player starts to display in sequence the first five (5)
secondsandtracknumbersofalltracksonthedisc. Selectthe
numbers you want to program. You can program nine (9)
tracks.
SPATIALIZER H : For movies and television programs
SPATIALIZER L : For music clips
2. To select the Spatializer mode, push the SPATIALIZER button
one or more times.
When one of the Spatializer modes is selected, the
SPATIALIZER indicator on the front panel is illuminated.
SPATIALIZER
6. Press the 3 SELECT button to play.
Viewing the highlights of a video CD
This function is used for a movie video CD.
Preparations
Eachtimeyoupressthebutton,youtogglethemodeasfollows:
SPATIALIZER H
SPATIALIZER L
OFF
•
When you play a video CD with the Playback Control function, the
mode switch should be in the PBC OFF mode or KARAOKE mode.
This function is controlled by the remote control unit.
•
(Television screen)
Operation
1. Start playing the track you want to see the highlights of.
2. After the track begins to play, press the HIGHLIGHT button on
the remote control.
3. To cancel the effect, press the SPATIALIZER button until the
word “OFF” appears on the television screen.
Note
•
Depending on which type of TV, amplifier or receiver to combine
with this device or which software to play back, sound may be
distorted when the SPATIALIZER function is turned on. In such
cases, set SPATIALIZER mode to “L”.
In the following cases, the SPATIALIZER function does not work
evenwhenitisturnedon. Alwaysusethisfunctioninspecifiedmode.
1) Be sure to set MPX mode of this device to “OFF (Lch + Rch)”.
When set to “L mono” or “R mono” mode, the SPATIALIZER
function does not work.
HIGH LIGHT
HIGHLIGHT
1
4
7
2
5
8
3
6
9
•
(Remote control)
(Television screen)
2) Be sure to set the sound mode of the TV, amplifier or receiver
which is connected to this device to “STEREO”. When set to
monauralmode, theSPATIALIZERfunctiondoesnotwork. The
SPATIALIZER function does not work with monaural TV, either.
3) Whensoundmultiplex(KARAOKE)softwareisplayedbackwith
theSPATIALIZERfunctionturnedon,youmayhavean“unnatu-
ral” feeling of sound spatiality. To play back sound multiplex
software, basically set SPATIALIZER mode to “OFF” or “L”.
4) The SPATIALIZER function does not work for the sound which
is recorded through the MIC terminal of this device.
This function is not effective if you attempt to use, at the same time,
thesimilarfunctionofatelevision,receiverorotherdeviceconnected
to this Video CD Player. Turn off the function on your television,
receiver, or other device before selecting your Video CD Player’s
SPATIALIZER mode.
3. To select one of the nine (9) segments, press the number key
(1 to 9) of the segment which you want to play.
Notes
•
Whenyouchooseahighlightitwillstartfromfive(5)secondsbefore
the shown time below each segment.
•
The highlights show the proceeding five (5) seconds up to the
displayed time on each highlight.
•
•
•
The segments are each of nine (9) equal-time divisions of the track.
Nine (9) different highlights are displayed for one (1) minute.
If no highlight is chosen in the one (1) minute period in NORMAL
mode or PBC OFF mode, the next nine (9) segment highlights will
begin. In KARAOKE mode highlights will stop.
•
•
While in VIDEO INTRO or HIGHLIGHT, sometimes image is
partiallydistorted. Thissymptomiscausedbynoiseinthediscitself
or incorrect manufacturing, not by a malfunction of the Player.
Certain audio features of this product manufactured
under a license from Desper Products, Inc.,
Spatializer® and the circle-in- square device are
trademarks owned by Desper Products, Inc.
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS UNIQUE FUNCTIONS
Playback with the
Bookmark function
Marking segments for later viewing with
the Bookmark function
Using the BOOKMARK SEARCH button
7 With PBC off
1. Press the BOOKMARK SEARCH button while playing a disc.
TheBOOKMARKSEARCHlightwillflashonandoff,indicating
the Player is in the Bookmark Search mode.
The Bookmark function lets you mark segments of a Video CD, so that
youcanhavealmostinstantplaybackofdesiredsceneslater. Youcan
mark segments on up to ten discs, with a maximum of nine segments
per disc.
B.SEARCH
Evenifyoutakethediscoutoftheplayer, itsbookmarkswillstaystored
for later use, until you erase them.
Operation
2. Press the Number key (1 to 9) which corresponds to the
number of the segment where you want to start play. Or press
the 4 or ¢ button until the desired bookmark number
appears on the screen.
While playing the disc, press the BOOKMARK button at the
segments you want to mark for later playing. Bookmark numbers
appear on the television screen.
BOOKMARK
Note
•
To exit the Bookmark Search mode and return to regular viewing,
press the BOOKMARK SEARCH button again.
Notes
•
•
The Bookmark function works only with Video CDs.
The BOOKMARK function is most easily used when the Player is
in PBC OFF mode.
When you begin marking segments in any one of the three Player
modes (KARAOKE, NORMAL or PBC OFF), all subsequent mark-
ings and searches for that disc must be done in the same mode.
If you mark a segment when the Player is set for the Playback
Control (PBC) function, the mark is placed at the beginning of the
scene.
7 With PBC on
1. Press the BOOKMARK SEARCH button while playing a disc.
The play will stop and the Player will enter Bookmark Search
mode.
•
•
B.SEARCH
2. Press the Number key (1 to 9) which corresponds to the
number of the segment where you want to start play.
Using the BOOKMARK DIGEST button
1. Press the BOOKMARK DIGEST button while playing the disc.
Note
•
The Bookmark Search function ends automatically, and the player
returns to reqular viewing.
BOOK DIGEST
Canceling individual bookmarks
2. The marked segments will be highlighted on the screen, with
their respective numbers (maximum of nine).
1. If the Player is in PBC OFF mode, start playing the segment
whose bookmark you want to cancel.
3. Press the Number key (1 to 9) which corresponds to the
number of the segment where you want to start play.
2. Press the CANCEL button. The bookmark for the segment
immediately preceding the part you are playing will be can-
celed. (If the Player is in KARAOKE or NORMAL mode, the
bookmark with the highest number will be canceled.)
1
6
2
7
3
8
4
9
5
CANCEL
10
+10
Note
•
When you cancel a bookmark number, all subsequent bookmark
numbers change, moving up one level to fill the gap you made.
If the Player is in PBC ON mode, the last bookmark you registered
will be canceled.
Note
•
If you plan to use the BOOKMARK DIGEST function, register all
bookmarks with the player in the same mode.
•
•
The Bookmark Digest function is not available in PBC function.
Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS UNIQUE FUNCTIONS
Using a microphone
Canceling all bookmarks on individual
discs
Using a wired microphone
Operation
1. Insert the connector cable into the end of the microphone.
2. Press the cable sleeve against the microphone base and turn
clockwise. Keep turning until sung.
3. Uptothree(3)microphonescanbeconnectedtotheMICjacks
on the front panel.
7 When the disc whose bookmarks you want to cancel is in the
Player:
This cancels all bookmarks on the disc whose play you stopped.
1. Stop play. Hold down the 8 STILL (PAUSE) button on the
Player for at least three seconds.
MIC 1
MIC 2
MIC 3
STILL
PROGRAMMED SONGS
DISC: 1
MIN
MAX
MIN
MAX
MIN
MAX
BOOKMARK
CANCEL
MIC
MIC 2
MIC 3
(Television screen)
2. Keep holding down the 8 STILL (PAUSE) button until book-
mark information on the television screen stops blinking.
7 When the disc whose bookmarks you want to cancel is not in
the Player:
4. Switch the microphone power on.
This cancels all bookmarks on the disc which was played the least
recently.
5. Turn the MIC 1 through MIC 3 knobs clockwise (level up) or
counterclockwise (level down) as desired.
MIC 1
MIC 2
MIC 3
1. Hold down the 7 STOP button on the Player for at least three
seconds.
STILL
PROGRAMMED SONGS
DISC: 3
MIN
MAX
MIN
MAX
MIN
MAX
BOOKMARK
CANCEL
(Television screen)
The total number of
discs with bookmarks
2. Keep holding down the 7 STOP button until bookmark infor-
mation on the television screen stops blinking.
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS UNIQUE FUNCTIONS
Adjusting music key
Press the KEY CONTROL buttons ( or #) to change the key in
which the music plays. To return the music to its original key,
press the NORMAL button.
You can adjust the music using the remote control unit also.
KEY CONTROL
DOWN
NORMAL
UP
Notes
•
The degree the key has been sharpened or flattened is displayed
on the television screen.
•
When the song ends the key control will return to NORMAL mode
automatically.
Adjusting echo effect
Turn the DIGITAL ECHO knob clockwise (level up) or counter-
clockwise (level down) to adjust the echo effect as desired.
DIGITAL ECHO
MIN
MAX
Page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS UNIQUE FUNCTIONS
ATTENTION
Vocal replace
Be sure to remove the microphone
NotewhenconnectingthesoundoutputtotheinputofaTVorVCR:
If an excessively strong signal is given to a unit through a micro-
phone, for example when using Karaoke, it may cause an adverse
effect such as distorted sound. Lower the sound volume using the
microphone control.
Preparation
This function is used for multiplex sound discs.
Operation
1. While holding down the SHIFT button, press the MPX/
V.REPLACE button during play or stop. REPLACE will appear
on the display window and VO.REPLACE will appear on the
television screen. When you start singing, the disc vocal is
removed and your voice is inserted into the music.
Karaoke etiquette
Think of your neighbors when you are enjoying karaoke music.
Particularly late at night, the sound you enjoy may reach your
neighborsmorethanyouexpect. Commonsenseandcourtesyare
always appreciated.
MPX
V.REPLACE
SHIFT
+
2. To cancel voice replacement, hold down the SHIFT button and
press the MPX/V.REPLACE button again.
Note
•
You cannot use the Vocal Replace function with a disc that has
vocals recorded on the left channel.
Vocal masking
Preparation
Use a digital audio CD with vocals, in KARAOKE mode.
Operation
1. While holding down the SHIFT button, press the SLOW/
V.MASKING button during play or stop. The player plays the
music with low level vocals recorded on the disc. MASKING
will appear on the display window and VO.MASKING will
appear on the television screen.
SLOW
V.MASKING
SHIFT
+
2. To cancel vocal masking, hold down the SHIFT button and
press the SLOW/V.MASKING button again.
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION OF PLAYBACK CONTROL FUNCTION
Playing Video CDs with
Playback Control function
This Player provides a Playback Control function which utilizes a
procedure (menu selection) programmed in a video CD. The playback
operation procedure may differ depending on the disc you use.
Operation
1. Verify that the Player is in NORMAL mode.
2. PresstheDISC(1through3)or3 SELECTbutton, andthenthe
PlayerstartsupthePBCfunction. “Pb”isshownintheDisplay
window. The main menu, “PBC”, and disc/track numbers are
displayed on the television screen.
The Playback Control function is described below and in the figure.
•
High-resolution still image display - Super-fine reproduction of still
images with more than 4 times the resolution of video tape.
Menu-driven playback - interactive menus for easy selection of
tracks
•
SELECT
or
Preparation
•
A video CD with the Playback Control function is required for this
operation.
•
•
Only the NORMAL mode can be used.
The buttons available for use are the number keys, the 4/¢
PREV/NEXT buttons, 3 SELECT button, DISC (1 through 3)
buttons, and
RETURN button.
2-PBC
PBC
1
2
3
4
Button functions
Number keys ............................ Select a specific menu item from the
(Including +10 button) television screen or monitor.
4/¢ PREV/NEXT buttons . Move through menu.
3 SELECT button .................... Starts up a video CD with the PBC
(Television screen)
function in DISC tray(s) 1 to 3.
3. To move through the disc menus, press the 4 ¢ PREV/
DISC (1 through 3) buttons ...... Start up a video CD with the PBC
function in the specified DISC tray.
NEXT buttons.
PREV
NEXT
RETURN button ................ Returns to the menu.
4. When the disc menu you want appears, select an item in the
menu by using the number keys. The numbers on the number
keys correspond to the menu item numbers.
5. To return to a menu and stop the track being played, press the
RETURN button.
RETURN
Notes
•
•
•
•
Page numbers in the disc menu show that preceding pages exist.
To move from the current menu, press the 4/¢ PREV/NEXT
buttons.
If you have no desire to use the PBC function when playing a disc
with the PBC function, switch the MODE switch to “PBC OFF”
before playing.
If you change the mode switch (except to NORMAL mode) when
playinga Playback-Controldisc, theplaystops, soresetagainfrom
the beginning.
If you press the number keys directly to select the track, you can’t
enter PBC mode.
Page 18
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION OF PLAYBACK CONTROL FUNCTION
•
•
Menu-driven playback
You can interact with the screen using a menu display to select and
play an entry.
High-resolution still image display
You can display high-quality images four times clearer than moving
pictures.
Video CDs with Playback Control function
What is Playback Control function?
ThePlaybackControlfunction, usheringinanewvideoCDage, allows
you to enjoy menu-driven operation and high-resolution still images
having a resolution four times greater than moving pictures.
Example of playback using the Playback Control function
1
2
3
Menu screen
3
1
2
Press
RETURN.
1
2
3
Moving
picture
1
2
1
2
1
2
3
To next screen
Press
RETURN.
Moving
picture
Moving
picture
Moving
picture
Still
picture
Still
picture
Moving
picture
Moving
picture
Moving
picture
To previous screen
Press
RETURN.
A selection menu is displayed when you start playing a video CD disc
with the Playback Control feature. The selection menu shows a list
of numbers for selection. Some discs may show moving pictures or
a divided screen.
(Some discs may show the menu screen several times.)
When “Next” and “Prev” are shown, pressing “NEXT” or “PREV”
can change the selection menu.
4. After playback, press RETURN to go back to the previous screen.
After playback, pressing RETURN for 2 seconds or more causes
it to go back to the previous menu selection. Some discs may
return you to the menu screen shown before playback.
1. When a list of numbers is displayed, selecting a number shows its
contents.
2. When a moving picture is displayed, pressing SELECT, at the
time when the part of the movie you desire is shown, plays the
movie.
Note
•
When a menu is displayed for a long time (about 10 minutes), the
screen background automatically fades out to prevent screen
burn-in while the setting is suspended.
3. When the selection menu is redisplayed after you have played
your selection, selecting a number again replays its contents.
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
RESTRICTING USE OF YOUR DISCS
Locking a disc with the
Read-Protect function
Locking a disc
Canceling Read-Protect
TheRead-Protectfunctionrestrictsviewingofadisc. Onlypeoplewho
know the code can unlock the disc. You can lock only Video CDs (up
to a maximum of 10 discs).
Operation
1. Place the disc in a tray, then press the Disc button for that tray.
PROTECT is displayed on the television screen.
Notes
•
When you lock a disc using the Read-Protect function, your Player
recognizes the number of tracks and the recorded time on that disc.
If you try to play another disc which has exactly the same number
of tracks and the same recorded time, the Player may mistakenly
assume that it is the locked disc.
•
•
You cannot lock a disc while it is playing, or when the VCD light is
blinking (i.e., immediately after turning on the player or shutting a
disc tray). Stop the disc, then lock it.
All Read-Protect functions are performed using buttons on the
Player, not on the remote control.
2. Hold down the PREV (Previous) button on the Player for more
than three seconds. The indication “Loc” in the Display
window will flicker for a moment.
PREV
3. Press the Number key “8” four times. You can now play the
disc.
Operation
1. Play the disc for a moment, then press the Stop button.
STILL
1
6
2
7
3
8
4
9
5
10
+10
2. Hold down the NEXT button on the Player for at least three
seconds. Thetrackandtimenumbersarenolongerdisplayed.
Canceling Read-Protect for a single
viewing
NEXT
Operation
1. Asabove, holddownthePREV(Previous)buttononthePlayer
for at least three seconds. The indication “Loc” in the Display
window will flicker for a moment.
3. Press the Number key “8” four times. The Display window
indicates “Loc.”
PREV
Now the disc cannot be viewed. You can open and close the tray and
you can turn the Player power on and off, but no other functions are
available for this locked disc.
Notes
2. Press the Number key “7” four times. You can now play the
disc, but only until you press the OPEN/CLOSE button for that
disc, or until you play another disc. (Turning off the Player
power does not lock the disc again.) This function is conve-
nientwhenyouwanttoplayadisc,butyoualsowanttorestrict
its use later.
•
PROTECT is displayed on the television screen.
Cut out the following instructions and keep them separately, to
ensure privacy.
Page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
GRAPHIC/DIGITAL AUDIO CDs
Playing CD Graphics/
digital audio CDs
Playing CD Graphics
Basic video CD-playing procedures apply although the pictures are
still. A CD Graphics is identified by “CD-G” shown on the display.
Notes
•
The following operations may distort the image on the screen.
Searching for starting point of music
Fast forwarding/reversing
Stop/pause
•
If paused, the screen changes to blue in a few minutes. This is to
prevent burn-in of the TV screen.
Playing digital audio CDs
BasicvideoCD-playingproceduresapplytothereproductionofsound.
Note
•
The display has no indicator to show disc type.
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Main specifications
XL-MV35TN
Accessories
AC power cord ........................................................................... 1
Audio video cord ........................................................................ 1
Remote control unit (RM-SXMV55U) ......................................... 1
Batteries (R6P(SUM-3)/AA(15F)) ......................................... 2
AC plug adaptor (except for China) ........................................... 1
Model
Video CD player
Playback disc Video CD (with/without Playback Control function)
CD Graphics
Digital Audio CD
Total harmonic
0.01% (1kHz)
distortion
S/N ratio
90 dB (Best Case)
Frequency
response
20Hz – 20kHz
Input terminal Microphone
2 mV (9.1 kΩ)
Output
terminal
Line output
2.0 Vrms (full scale)
1.0 Vp-p (75Ω)
Image output
Video (composite)
Echoing
Digital echoing
Power
requirements
AC220V/50Hz (for China)
AC115-127/220-240V
adjustable with the voltage selector; 50/60Hz
(for other area)
Power
18 watts
consumption
In standby mode
5 watts
Weight
5.3 Kg (11.7 lbs)
Dimensions
(W/H/D)
447 x 127 x 333.5 mm
17-5/8 x 5 x13-3/16 inches
Page 22
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Troubleshooting
What appears to be a malfunction may not always be so. Please go through the following list before requesting service.
Symptom
Possible cause
Power plug is disconnected from AC outlet.
Batteries are exhausted.
Remedy
Power does not come on.
Firmly connect the plug to AC outlet.
Replace the batteries with new ones.
Remote control does not work.
The tip of the remote controller is not pointed at the Use the remote control correctly.
receiving part of the player.
No image is displayed on the
monitor.
The video cable is not connected.
The TV is not set in video mode.
An incompatible disc is loaded.
No disc is loaded.
Firmly connect the cable.
Set the TV in video mode.
Load a disc compatible with the player.
Load a disc.
Playback does not start.
Disc is loaded upside down.
Audio cable is not connected.
Operation of the external amplifier is incorrect.
Disc is dirty.
Reload the disc with the label up.
Firmly connect the cable.
Speaker does not produce
sound.
Operate the amplifier correctly.
Wipe the disc surface with a soft cloth.
Correctly connect cables. (See page 2.)
Sound is distorted or noise is
generated.
Image is garbled.
Connection is wrong.
Sound is intermittent.
Image is garbled.
Disk is dirty.
Wipe the disc surface with a soft cloth.
(See page 1.)
Disc is scratched.
Disc is warped.
Replace the disc with a new one.
Disc tray does not come out when Power plug is disconnected from the power outlet.
OPEN/CLOSE button is pressed.
Firmly insert the plug into the outlet.
Operation is not possible.
Microcomputer malfunctions due to lightning or static Turn the power off, then on again.
electricity.
The malfunction may be caused by a device other than the player. Check other devices connected to the player.
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
AC Power Line Instructions (not applicable for China)
LINE VOLTS
220V-240V
115V-127V
AC POWER CORD
IMPORTANT
BEFORE PLUGGING IN, check that your AC power line
voltage corresponds with the position of the voltage
selector switch provided on the outside of this equipment.
If different, reset the voltage selector switch, to prevent
damage or risk of fire/electric shock.
J
C
V
VICTOR COMPANY OF JAPAN, LIMITED
EN, CH
1097TTMUBNJEM
Download from Www.Somanuals.com. All Manuals Search And Download.
|