JVC Camcorder GR AX940 User Manual
COMPACT VHS CAMCORDER  
ENGLISH  
GR-AX940  
For Customer Use:  
Enter below the Model No. and Serial  
No. which is located on the bottom of  
cabinet. Retain this information for  
future reference.  
Model No.  
Serial No.  
INSTRUCTIONS  
LYT0259-001C  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
EN3  
5. Ventilation  
IMPORTANT PRODUCT  
SAFETY INSTRUCTIONS  
Slots and openings in the cabinet are provided for  
ventilation. To ensure reliable operation of the product  
and to protect it from overheating, these openings must  
not be blocked or covered.  
•Do not block the openings by placing the product on a  
bed, sofa, rug or other similar surface.  
•Do not place the product in a built-in installation such  
as a bookcase or rack unless proper ventilation is  
provided or the manufacturer’s instructions have been  
adhered to.  
Electrical energy can perform many useful functions.  
But improper use can result in potential electrical  
shock or fire hazards. This product has been  
engineered and manufactured to assure your  
personal safety. In order not to defeat the built-in  
safeguards, observe the following basic rules for its  
installation, use and servicing.  
6. Wall or Ceiling Mounting  
The product should be mounted to a wall or ceiling only  
as recommended by the manufacturer.  
ATTENTION:  
Follow and obey all warnings and instructions  
marked on your product and its operating instruc-  
tions. For your safety, please read all the safety and  
operating instructions before you operate this  
product and keep this manual for future reference.  
ANTENNA INSTALLATION  
INSTRUCTIONS  
1. Outdoor Antenna Grounding  
If an outside antenna or cable system is connected to the  
product, be sure the antenna or cable system is  
grounded so as to provide some protection against  
voltage surges and built-up static charges. Article 810 of  
the National Electrical Code, ANSI/NFPA 70, provides  
information with regard to proper grounding of the mast  
and supporting structure, grounding of the lead-in wire  
to an antenna discharge unit, size of grounding  
conductors, location of antenna discharge unit,  
connection to grounding electrodes, and  
INSTALLATION  
1. Grounding or Polarization  
(A) Your product may be equipped with a polarized  
alternating-current line plug (a plug having one blade  
wider than the other). This plug will fit into the  
power outlet only one way. This is a safety feature.  
If you are unable to insert the plug fully into the  
outlet, try reversing the plug. If the plug should still  
fail to fit, contact your electrician to replace your  
obsolete outlet. Do not defeat the safety purpose of  
the polarized plug.  
requirements for the grounding electrode.  
2. Lightning  
For added protection for this product during a lightning  
storm, or when it is left unattended and unused for long  
periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This will  
prevent damage to the product due to lightning and  
power-line surges.  
(B) Your product may be equipped with a 3-wire  
grounding-type plug, a plug having a third (ground-  
ing) pin. This plug will only fit into a grounding-type  
power outlet. This is a safety feature.  
If you are unable to insert the plug into the outlet,  
contact your electrician to replace your obsolete  
outlet. Do not defeat the safety purpose of the  
grounding-type plug.  
3. Power Lines  
An outside antenna system should not be located in the  
vicinity of overhead power lines or other electric light or  
power circuits, or where it can fall into such power lines  
or circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching  
such power lines or circuits as contact with them might  
be fatal.  
2. Power Sources  
Operate your product only from the type of power  
source indicated on the marking label. If you are not  
sure of the type of power supply to your home, consult  
your product dealer or local power company. If your  
product is intended to operate from battery power, or  
other sources, refer to the operating instructions.  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70  
3. Overloading  
Do not overload wall outlets, extension cords, or integral  
convenience receptacles as this can result in a risk of fire  
or electric shock.  
ANTENNA  
LEAD IN WIRE  
4. Power Cord Protection  
GROUND CLAMP  
Power supply cords should be routed so that they are  
not likely to be walked on or pinched by items placed  
upon or against them, paying particular attention to  
cords at plugs, convenience receptacles, and the point  
where they exit from the product.  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION  
ELECTRIC SERVICE  
EQUIPMENT  
810-20)  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING ELECTRODE SYSTEM  
(NEC ART 250. PART H)  
NEC – NATIONAL ELECTRICAL CODE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
EN  
USE  
SERVICING  
1. Servicing  
1. Accessories  
To avoid personal injury:  
If your product is not operating correctly or exhibits a  
marked change in performance and you are unable  
to restore normal operation by following the detailed  
procedure in its operating instructions, do not  
attempt to service it yourself as opening or removing  
covers may expose you to dangerous voltage or other  
hazards. Refer all servicing to qualified service  
personnel.  
•Do not place this product on an unstable cart,  
stand, tripod, bracket or table. It may fall, causing  
serious injury to a child or adult, and serious  
damage to the product.  
•Use only with a cart, stand, tripod, bracket, or table  
recommended by the manufacturer or sold with the  
product.  
•Use a mounting accessory recommended by the  
manufacturer and follow the manufacturer’s  
instructions for any mounting of the product.  
•Do not try to roll a cart with small casters across  
thresholds or deep-pile carpets.  
2. Damage Requiring Service  
Unplug this product from the wall outlet and refer  
servicing to qualified service personnel under the  
following conditions:  
a. When the power supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen  
into the product.  
2. Product and Cart  
Combination  
A product and cart  
PORTABLE CART WARNING  
(Symbol provided by RETAC)  
c. If the product has been exposed to rain or water.  
d. If the product does not operate normally by  
following the operating instructions. Adjust only  
those controls that are covered by the operating  
instructions as an improper adjustment of other  
controls may result in damage and will often  
require extensive work by a qualified technician  
to restore the product to its normal operation.  
e. If the product has been dropped or damaged in  
any way.  
combination should be  
moved with care. Quick  
stops, excessive force, and  
uneven surfaces may cause  
the product and cart  
combination to overturn.  
3. Water and Moisture  
Do not use this product near water—for example,  
near a bath tub, wash bowl, kitchen sink or laundry  
tub, in a wet basement, or near a swimming pool and  
the like.  
f. When the product exhibits a distinct change in  
performance—this indicates a need for service.  
3. Replacement Parts  
4. Object and Liquid Entry  
When replacement parts are required, be sure the  
service technician has used replacement parts  
specified by the manufacturer or have the same  
characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock or other  
hazards.  
Never push objects of any kind into this product  
through openings as they may touch dangerous  
voltage points or short-out parts that could result in a  
fire or electric shock. Never spill liquid of any kind  
on the product.  
5. Attachments  
4. Safety Check  
Do not use attachments not recommended by the  
manufacturer of this product as they may cause  
hazards.  
Upon completion of any service or repairs to this  
product, ask the service technician to perform safety  
checks to determine that the product is in safe  
operating condition.  
6. Cleaning  
Unplug this product from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol  
cleaners. Use a damp cloth for cleaning.  
7. Heat  
The product should be situated away from heat  
sources such as radiators, heat registers, stoves, or  
other products (including amplifiers) that produce  
heat.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK OPERATION GUIDE  
EN5  
INSERTING A VIDEO  
CASSETTE  
SUPPLY POWER  
A
Hook on.  
B
Push in.  
PUSH Button  
EJECT Switch  
BATTERY RELEASE  
1 Slide EJECT to open the cassette holder.  
2 Insert a video cassette.  
3 Press PUSH to close the cassette holder.  
(For more details, ੬ pg. 13)  
Using the battery pack  
Hook its end to the camcorder ( ) and push the  
battery pack in until it locks in place ( ).  
(Charging procedure, ੬ pg. 8)  
To remove the battery pack  
Slide BATTERY RELEASE and pull out the battery  
pack.  
PLAYBACK  
SHOOTING  
REW (2) Button  
2
1
LENS COVER  
Open/Close Ring  
2
Set to “AUTO”  
or “PRO.”  
PLAY/PAUSE  
3
(
4/6) Button  
1
STOP (5) Button  
Recording Start/Stop Button  
3
Set to “PLAY”  
1 Set the Power Switch to “PLAY”.  
2 Press REW (2).  
1 Turn the LENS COVER Open/Close Ring to  
open the lens cover.  
— The tape will automatically stop at the  
beginning of the tape.  
2 Set the Power Switch to “AUTO” or “PRO.”.  
— The power lamp will light and an image  
will appear.  
3 Press the Recording Start/Stop Button.  
— Recording starts.  
3 Press PLAY/PAUSE (4/6).  
— Playback starts and the playback picture  
appears.  
•To stop playback, press STOP (5).  
(For more details, ੬ pg.38.)  
•To stop recording temporarily, momentarily  
press the Recording Start/Stop Button once  
again.  
(For more details, ੬ pgs. 16, 17)  
Or simply play back the tape on a VHS VCR  
using the Cassette Adapter (VHS Playpak).  
੬ pg. 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAJOR FEATURES  
6
EN  
REMEMBER  
Picture Stabilizer (੬ pg. 20)  
The Logical Choice  
Digital Hyper Zoom  
(੬ pg. 18)  
The only compact video  
cassettes that can be  
used with your VHS VCR*  
Zoom in  
Program AE with Special  
Effects (੬ pg. 24, 25)  
Zoom out  
Ⅲ Electronic Fog Filter  
Ⅲ ND Effect  
Ⅲ Sepia  
PROVIDED ACCESSORIES  
Ⅲ Twilight  
Ⅲ Sports  
Ⅲ Nega/Posi  
Ⅲ 1/2000 sec. High Speed Shutter  
•AC Power Adapter/  
Charger AA-V15U  
•Cassette Adapter  
(VHS Playpak) C-P7U  
Snapshot (੬ pg. 22)  
Menu Adjustment  
(੬ pg. 28, 29, 30)  
•Shoulder Strap  
•Battery Pack  
BN-V11U  
Integrated Auto Light  
(੬ pg. 21)  
•Lithium Battery  
CR2025 x 1  
(for clock operation)  
•DC Cord  
Cassettes marked  
camcorder.  
can be used with this  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
EN7  
8 – 15  
GETTING STARTED  
Power............................................................................................................ 8  
Clock (Lithium) Battery Insertion/Removal .............................................................. 10  
Date/Time Settings.......................................................................................... 11  
Recording Mode Setting..................................................................................... 12  
Tape Length Setting.......................................................................................... 12  
Loading/Unloading A Cassette............................................................................. 13  
Grip Adjustment .............................................................................................. 14  
Viewfinder Adjustment ..................................................................................... 14  
Shoulder Strap Attachment ................................................................................. 15  
Tripod Mounting .............................................................................................. 15  
RECORDING  
16 – 37  
Basic Recording............................................................................................... 16  
Basic Features ................................................................................................ 18  
Advanced Features........................................................................................... 22  
PLAYBACK  
38 – 43  
Basic Playback................................................................................................ 38  
Features ....................................................................................................... 39  
Using The Cassette Adapter ................................................................................ 41  
Basic Connections And Tape Dubbing ...................................................................... 42  
USER MAINTENANCE  
TROUBLESHOOTING  
INDEX  
44  
45 – 46  
47 – 50  
Indications..................................................................................................... 47  
Controls, Connectors And Indicators ...................................................................... 48  
Terms .......................................................................................................... 50  
CAUTIONS  
51 – 52  
53  
SPECIFICATIONS  
OPTIONAL ACCESSORIES  
ESPAÑOL  
53  
54 – 55  
56  
FOR SERVICING (Only in U.S.A.)  
WARRANTY (Only in U.S.A.)  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED  
8
EN  
Marks  
Power  
This camcorder’s 3-way power supply system lets you choose  
the most appropriate source of power.  
To AC outlet  
CHARGE indicator  
NOTES:  
● No function is available without power supply.  
● Use only the specified power supply.  
● Do not use provided power supply units with other  
equipment.  
CHARGING THE BATTERY PACK  
REFRESH switch  
SUPPLY POWER  
1 Connect the charger’s AC power cord to a wall outlet.  
REFRESH indicator  
ATTACH BATTERY PACK  
2 Align the marks and slide the battery pack in the  
REFRESH  
direction of the arrow until it locks in place.  
The AC Power Adapter/Charger features a  
REFRESH function that allows you to fully  
discharge the battery pack before recharg-  
ing.  
Perform the REFRESH function after no less  
than 5 chargings.  
•The CHARGE indicator begins blinking to indicate  
charging has started.  
DETACH BATTERY PACK  
3 When the CHARGE indicator stops blinking but stays lit,  
charging is finished. Slide the battery pack opposite the  
direction of the arrow.  
To discharge the battery . . .  
.... attach the battery pack to the adapter as  
shown in the above illustration. Then  
push REFRESH. The REFRESH indicator  
lights when discharging starts, and goes  
out when discharging is complete.  
Battery pack  
BN-V11U  
BN-V12U  
BN-V20U  
Charging time  
Discharging time  
approx. 3 hrs. 30 min.  
approx. 3 hrs. 30 min.  
approx. 6 hrs. 40 min.  
approx. 1 hr. 10 min.  
approx. 1 hr. 10 min.  
approx. 1 hr. 50 min.  
USING THE BATTERY PACK  
A
Hook on.  
Push in.  
ATTACH BATTERY PACK  
B
1 Hook its end to the camcorder (  
) and push the battery  
pack in until it locks in place (  
) .  
DETACH BATTERY PACK  
2 Slide BATTERY RELEASE and pull out the battery pack.  
Battery pack  
BN-V11U  
BN-V12U  
BN-V20U  
Approximate recording time (unit: min.)  
70 (40)  
70 (40)  
110 (65)  
BATTERY RELEASE  
(
) : when the video light is on.  
INFORMATION:  
ATTENTION:  
VU-V856KIT is a set composed of the BN-V856U battery pack  
and AA-V80U AC Power Adapter/Charger.  
Before detaching the power source,  
make sure that the camcorder’s power  
is turned off. Failure to do so can result  
in a camcorder malfunction.  
The BN-V856U battery pack provides approx. 7 hours of  
recording time when the video light is off. Also read  
thoroughly the VU-V856KIT’s instruction manuals.  
It is impossible to charge the BN-V856U battery pack using  
the provided AC Power Adapter/Charger. Use the optional  
AA-V80U AC Power Adapter/Charger.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN9  
Charge Marker  
Charge marker  
A charge marker is provided on the battery pack to  
help you remember whether it has been charged or  
not. Two colors are provided (red and black)—you  
choose which one means charged and which means  
discharged.  
ATRED  
ENIGST  
NOTES:  
● The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the  
frequency of zooming. It is safer to have spare battery packs to cover 3 times the planned shooting time.  
● Charging times noted on page 8 are for a fully discharged battery pack, and discharging times are for a fully  
charged battery pack.  
● Charging and discharging times vary according to the ambient temperature and the status of the battery pack.  
● Remember to set the charge marker after charging a battery pack or after detaching a discharged one from  
your camcorder.  
● Perform the REFRESH function after no less than 5 chargings.  
● While the AC Power Adapter/Charger’s power cord is disconnected from the AC outlet, it is possible to  
discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger does  
not charge the battery. When discharging is complete, detach the battery from the AC Power Adapter/  
Charger to store it.  
● High temperatures can damage the battery pack, so use only where good ventilation is available. Do not  
allow it to discharge in a container, such as a bag.  
● If you stop recharging or discharging part way through, make sure to remove the battery pack before  
unplugging the adapter’s AC cord.  
● Remove the battery pack from the adapter immediately after discharging.  
● To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.  
● Make sure you unplug the DC cord before charging or discharging the battery pack.  
● The CHARGE indicator may not light properly with a brand new battery pack, or with one that has been  
stored for an extended period. In this case, remove and reattach the battery pack and recharge it. The  
CHARGE indicator should blink during recharging. If it doesn’t, contact your nearest JVC dealer.  
USING AC POWER  
To DC IN jack  
To AC outlet  
Use the AC Power Adapter/Charger (connect as  
shown in the illustration to the left).  
DC OUT  
terminal  
NOTES:  
● The provided AC Power Adapter/Charger features  
automatic voltage selection in the AC range from  
110 V to 240 V.  
AC Power  
Adapter/Charger  
AA-V15U  
● When using the DC cord, make sure you connect  
the end of the cord with the core filter to the  
camcorder. The core filter reduces interference.  
DC Cord  
USING A CAR BATTERY  
Use the optional Car Battery Cord or Car Battery  
Charger/Adapter (connect as shown in the  
illustration to the left).  
To car’s  
cigarette  
lighter  
socket  
Car Battery Cord  
AP-V7U (optional)  
NOTES:  
● When using the car battery, leave the engine  
idling.  
● The optional Car Battery Charger (BH-V3U) can  
also be used to charge the battery pack (except  
BN-V20U/V856U).  
Car Battery  
Charger/Adapter  
● When using the optional Car Battery Charger or  
Car Battery Cord (AP-V7U), refer to the respective  
instruction booklet.  
BH-V3U (optional)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED (cont.)  
10  
EN  
Slot  
Clock (Lithium) Battery Insertion/Removal  
This battery is necessary for clock operation and to  
perform date/time settings.  
SWITCH OFF POWER  
1 Switch off the unit’s power and remove the power  
supply unit (battery pack, AC Power Adapter/Battery  
Charger, etc.).  
REMOVE BATTERY HOLDER  
2 Pull out the battery holder.  
Battery holder  
INSERT BATTERY IN HOLDER  
3 Insert the battery in the holder, and be sure to have  
the “+” mark visible.  
RE-INSERT HOLDER  
4 Slide the holder back into the slot until you hear a  
click.  
NOTE:  
See “SAFETY PRECAUTIONS” (੬ pg. 2) for information  
on safe handling of lithium batteries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN11  
Date/Time Settings  
ACCESS MENU SCREEN  
1 Set the Power Switch to “PRO.”, then press MENU.  
ATRED  
•The power lamp comes on.  
SELECT FUNCTION  
2 Rotate the Select Dial to move the highlight bar to  
“DATE/TIME”, then press it. The DATE/TIME Menu  
appears.  
ENIGST  
•If you decide you want to return the date and time  
to the previous settings, rotate the Select Dial to  
move the highlight bar to “EXIT” and press it, then  
go to step 6.  
MENU Button  
Power lamp  
•If you want to set only the time without changing  
the date, go to step 4.  
SET DATE  
3 Rotate the Select Dial to move the highlight bar to the  
item you want to set and then press it. When the  
setting begins blinking, rotate the Select Dial until the  
correct setting appears and then press it. The setting  
stops blinking.  
Select Dial  
Display  
Power Switch  
Menu Screen  
•Repeat this procedure until you’re satisfied with the  
Date settings (“YEAR”, “MONTH” and “DAY”).  
4
NEXT  
M.W.B.  
AUTO  
ON  
D . ZOOM  
SET TIME  
TELE MACRO OFF  
DATE TIME  
4 Rotate the Select Dial to move the highlight bar to  
TAPE LENGTH T30  
“TIME” and then press it. When the hour setting  
begins blinking, rotate the Select Dial until the correct  
setting appears and then press it. When the hour  
setting stops blinking and the minute setting begins  
blinking, rotate the Select Dial until the correct setting  
appears and then press it. The minute setting stops  
blinking.  
4
RETURN  
DATE TIME  
DATE/TIME Menu  
YEAR  
MONTH  
DAY  
1999  
JAN  
1
12-hour indication  
with AM or PM  
TIME  
PM 12 : 00  
START CLOCK OPERATION  
5 When none of these settings (“YEAR”, “MONTH”,  
“DAY”, “TIME”) blinks, rotate the Select Dial to move  
the highlight bar to “EXIT”, and press it. The Menu  
Screen reappears with the highlight bar on  
“RETURN”.  
EXIT  
4
NEXT  
M.W.B.  
AUTO  
ON  
D . ZOOM  
CLOSE MENU SCREEN  
TELE MACRO OFF  
DATE TIME  
6 Press the Select Dial.  
TAPE LENGTH T30  
NOTE:  
4RETURN  
To display the date and time in the camcorder’s display  
and on a connected TV, see “Date/Time Insert”  
(੬ pg. 26).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED (cont.)  
12  
EN  
Recording Mode Setting  
Set depending on your preference.  
SET RECORDING MODE  
1 First set the Power Switch to “AUTO” or “PRO.”.  
Press SP/EP for more than 1 second. “SP” (Standard  
Play) provides higher picture and sound quality and is  
better for dubbing, while “EP” (Extended Play) is  
more economical, providing three times the record-  
ing time.  
NOTE:  
MENU Button  
SP/EP Recording Mode Button  
If the recording mode is switched during recording, the  
playback picture will be blurred at the switching point.  
Tape Length Setting  
Set the tape length according to the length of the tape  
used.  
Select Dial  
Viewfinder  
Power Switch  
ACCESS MENU SCREEN  
1 First set the Power Switch to “PRO.”. Press MENU.  
SELECT FUNCTION  
T30  
Tape length indicator  
SP  
2 Rotate the Select Dial to move the highlight bar to  
“TAPE LENGTH”, then press it. The TAPE LENGTH  
Setting Menu appears.  
Recording mode  
indicator  
SET TAPE LENGTH  
3 Rotate the Select Dial to move the highlight bar to the  
correct setting. T20=20 minutes of recording time,  
T30=30 minutes, and T40=40 minutes (in SP).  
Display  
•If you decide you want to return the tape length to  
the previous setting, rotate the Select Dial to move  
the highlight bar to “EXIT”.  
Menu Screen  
4
NEXT  
M.W.B.  
AUTO  
ON  
D . ZOOM  
TELE MACRO OFF  
DATE TIME  
TAPE LENGTH T30  
CLOSE MENU SCREEN  
4 Press the Select Dial. The Menu Screen reappears  
4RETURN  
with the highlight bar on “RETURN”. Press the Select  
Dial again to close the Menu Screen.  
TAPE LENGTH  
TAPE LENGTH  
Setting Menu  
NOTE:  
T20  
T30  
T40  
The tape remaining time (੬ pg. 17) displayed in the  
viewfinder is correct only if the correct tape length has  
been selected.  
EXIT  
4
NEXT  
M.W.B.  
AUTO  
ON  
D . ZOOM  
TELE MACRO OFF  
DATE TIME  
TAPE LENGTH T40  
4RETURN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN13  
Cassette holder  
Loading/Unloading A Cassette  
OPEN CASSETTE HOLDER  
1 Slide EJECT until the holder opens. Do not use force  
ATRED  
to open.  
INSERT/REMOVE CASSETTE  
2 Make sure the label is facing outward.  
CLOSE CASSETTE HOLDER  
ENIGST  
3 Press PUSH and make sure the holder is closed and  
locked.  
NOTES:  
PUSH Button  
EJECT Switch  
● The cassette holder cannot be opened unless a power  
supply is attached.  
● Make sure that the tape is not slack when loading the  
cassette. If there is any slack, turn the gear on the  
cassette in the direction of the arrow to take up the  
slack.  
● Make sure the Erase Protection tab is in the position that  
allows recording. If not, slide the tab. Some cassettes  
have removable tabs. If the tab has been removed, cover  
the hole with adhesive tape.  
Turn to take  
up slack.  
● The cassette holder cannot be opened while the  
camcorder is in the record mode.  
Erase Protection  
Gear  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED (cont.)  
Grip Adjustment  
14  
EN  
Power Zoom Lever  
EXPAND LOOP  
1 Separate the Velcro strip.  
INSERT HAND  
2 Pass your right hand through the loop and grasp the  
grip.  
ADJUST STRAP LENGTH  
3 Adjust so your thumb and fingers can easily operate  
the Recording Start/Stop Button and Power Zoom  
Lever. Refasten the Velcro strip.  
Recording Start/Stop Button  
Viewfinder Adjustment  
SELECT OPERATION MODE  
1 Set the Power Switch to “CAMERA” (“AUTO” or  
“PRO.”).  
3
POSITION VIEWFINDER  
2 Adjust the viewfinder manually for best viewability  
(see illustration at left).  
2
180°  
ADJUST DIOPTER  
3 Turn the Diopter Adjustment Control until the  
indications in the viewfinder are clearly focused.  
1
Set “POWER” to  
“CAMERA”  
(“AUTO” or “PRO.”)  
PAUSE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN15  
Shoulder Strap Attachment  
ATTACH STRAP  
1 Following the illustration at left, thread the strap  
ATRED  
through the top of the eyelet 1, then fold it back and  
thread it through the buckle 2. Repeat the procedure  
to attach the other end of the strap to the other eyelet  
3, making sure the strap is not twisted.  
1
4
2
ADJUST LENGTH  
ENIGST  
2 Adjust as shown in the illustration at left 4.  
3
Tripod Mounting  
ALIGN AND TIGHTEN  
1 Align the screw and camera direction stud on the  
tripod with the camera’s mounting socket and stud  
hole. Then tighten the screw.  
CAUTION:  
When using a tripod, be sure to open and extend  
its legs fully to stabilize the camcorder. To  
prevent damage to the unit caused by falling  
over, do not use a small-sized tripod.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Basic Recording  
16  
EN  
LENS COVER Open/Close Ring  
NOTE:  
You should already have performed the procedures listed  
below. If not, do so before continuing.  
● Power (੬ pg. 8)  
● Recording Mode Setting (੬ pg. 12)  
● Tape Length Setting (੬ pg. 12)  
● Grip Adjustment (੬ pg. 14)  
● Viewfinder Adjustment (੬ pg. 14)  
LOAD A CASSETTE  
1 Slide EJECT to open the cassette holder, then insert  
the cassette with the label facing out. Press PUSH to  
ensure the holder is closed and locked.  
Power Switch  
Recording Start/Stop Button  
EJECT Switch  
ENTER RECORD-STANDBY MODE  
2 Turn the LENS COVER Open/Close Ring to open the  
lens cover, then set the Power Switch to “CAMERA”  
(“AUTO” or “PRO.”).  
Power lamp  
•The power lamp lights and the camcorder enters the  
Record-Standby mode.  
•The scene you are aimed at appears on the  
viewfinder screen, with the word “PAUSE”  
superimposed upon it.  
START SHOOTING  
Tally lamp  
(lights while recording is in progress)  
3 Press the Recording Start/Stop Button.  
•“  
” appears in the viewfinder while recording is  
in progress.  
Power Switch Position  
According to the Power Switch position you have selected, the following functions are available:  
AUTO  
(Full Auto mode):  
PRO.  
(PRO. mode):  
OFF:  
Allows you to record using  
Allows you to set various  
recording functions using the  
menus. If you want more creative  
capabilities than full auto  
recording, try this mode.  
Allows you to switch off the  
camcorder.  
NO special effects or manual  
adjustments. Suitable for  
standard recording.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN17  
Tape remaining time indicator  
STOP RECORDING  
4 Press the Recording Start/Stop Button again to stop  
25MIN  
MIN  
(Now calculating)  
recording.  
•The camcorder re-enters the Record-Standby mode.  
120MIN  
119MIN  
NOTES:  
● The cassette holder cannot be opened unless a power  
supply is attached.  
● There may be a delay after you slide EJECT until the  
holder opens. Do not use force.  
3MIN  
● The tape remaining time is only displayed in the  
viewfinder as shown.  
2MIN  
(Blinking)  
● The remaining time indicated in the viewfinder is  
approximate.  
● The time required to calculate the remaining tape  
length, and the accuracy of the calculation, may vary  
according to the type of tape used.  
1MIN  
(Blinking)  
● The tape remaining time indicator is correct only if the  
correct tape length has been selected (੬ pg. 12).  
● “TAPE END” appears when the tape reaches its end, and  
the power goes off automatically if left in this condition  
for 5 minutes. “TAPE END” also appears when a cassette  
whose tape is already at its end is loaded.  
0MIN  
(Blinking)  
EOCRDING  
● If the Record–Standby mode continues for 5 minutes  
without performing Zoom or any other operations, the  
camcorder’s power shuts off automatically. Set the  
Power Switch to “POWER OFF”, and then back to  
“CAMERA” to turn the camcorder on again.  
● If the Recording Start/Stop button is pressed after the  
Record-Standby mode has continued for over  
5 minutes, recording may not start immediately.  
● If you are recording on a cassette from the middle (such  
as when a tape is removed and re-inserted during  
recording), use the Retake function (੬ pg. 19) to find  
the end of the last recording so you don’t erase any of it.  
● The LENS COVER warning blinks for about 5 seconds  
when the camcorder is turned on with the cover closed.  
● While shooting, sound is not heard from the speaker.  
● To turn the tally lamp off during recording, refer to pgs.  
28 and 30.  
Recording Start/Stop Button  
DISPLAY Button  
Viewfinder Indications  
By pressing DISPLAY, you can make the following, indica-  
tions appear/disappear from the camcorder’s display: cassette  
warning, tape remaining time, battery pack remaining  
power indicator and tape length indicator (੬ pg. 47).  
PRESS DISPLAY BUTTON  
1 When you do not want the indications to appear,  
press DISPLAY for longer than approximately 1  
second. Certain indications disappear.  
Press again for longer than approx. 1 second to make  
the indications reappear.  
NOTE:  
Even if DISPLAY is pressed, the tape remaining time  
appears blinking when the tape is about to reach its end,  
and the battery pack remaining power indicator also  
appears blinking when the power is almost gone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Basic Features  
18  
EN  
FEATURE: Zooming  
Zoom in  
PURPOSE:  
To produce the zoom in/out effect, or an instantaneous  
change in image magnification.  
Digital circuitry extends the maximum magnification  
offered by optical zoom. This system is called Digital  
Zoom.  
Zoom out  
OPERATION:  
Zoom In  
Push the Power Zoom Lever towards “T”.  
Zoom Out  
Display  
Push the Power Zoom Lever towards “W”.  
Ⅲ The quicker you push the Power Zoom Lever, the  
quicker the zoom action.  
Zoom indicator bar  
Zoom level indicator  
1X  
NOTES:  
● Focusing may become unstable during Zooming. In  
this case, set the zoom while in Record–Standby,  
lock the focus by using the manual focus  
(੬ pg. 33), then zoom in or out in Record mode.  
● The zoom level indicator (5) moves during zoom.  
Once the zoom level indicator reaches the top of  
the zoom indicator bar, all magnification from that  
point is through digital processing.  
Approximate zoom ratio  
Power Zoom Lever  
● When using Digital Zoom, the image quality of the  
image may suffer. To deactivate Digital Zoom, set  
“D.ZOOM” to “OFF” in the Menu Screen  
(੬ pg. 29).  
Power Switch  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN19  
FEATURE: Quick Review  
PURPOSE:  
To check the end of the last recording.  
OPERATION:  
1) Press “ ” and release quickly during the Record–  
Standby mode.  
Ⅲ Tape is rewound for about 2 seconds and played  
back automatically, then pauses in Record–Standby  
mode for the next shot.  
NOTE:  
Distortion may occur at the start of playback. This is  
normal.  
RETAKE (R/F) Button  
FEATURE: Retake  
PURPOSE:  
To re-record certain segments.  
OPERATION:  
1) Make sure the camcorder is in the Record–Standby  
mode.  
EOCRDING  
2) Press either RETAKE to reach the start point for new  
recording. Pressing “F” forwards the tape and  
pressing “R” reverses it.  
3) Press the Recording Start/Stop Button to start  
recording.  
NOTE:  
Noise bars appear and pictures may become  
monochrome or darken during Retake. This is normal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Basic Features (cont.)  
20  
EN  
P. STABILIZER Button  
FEATURE: Picture Stabilizer  
PURPOSE:  
To compensate for unstable images caused by camera-  
shake, particularly at high magnification.  
OPERATION:  
1) Press P. STABILIZER. “  
”appears.  
Ⅲ To switch off the Picture Stabilizer, press  
P. STABILIZER. The indicator disappears.  
NOTES:  
● Accurate stabilization may not be possible if hand  
shake is excessive, or under the following condi-  
tions:  
•When shooting subjects with vertical or horizontal  
stripes.  
Display  
•When shooting dark or dim subjects.  
•When shooting subjects with excessive  
backlighting.  
•When shooting scenes with movement in various  
directions.  
•When shooting scenes with low-contrast back-  
grounds.  
Power Switch  
Picture stabilizer indicator  
● Switch off the Picture Stabilizer when recording  
with the camcorder on a tripod.  
● The “  
” indicator appears blinking if the  
Stabilizer cannot be used.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN21  
FEATURE: Video Light  
PURPOSE:  
To brighten the scene when natural lighting is too dim.  
OPERATION:  
1) Set the LIGHT OFF/AUTO/ON Switch as required:  
OFF : Turns off the light.  
AUTO : Automatically turns on the light when the  
camcorder senses insufficient lighting on the  
subject.  
ON  
: Always keeps the light on as long as the  
camcorder is turned on.  
LIGHT OFF/AUTO/ON Switch  
Ⅲ The video light can only be used with the  
camcorder’s power on.  
Ⅲ It is recommended to set the white balance  
(੬ pg. 34) to  
when you use the video light.  
Ⅲ When not using the video light, turn it off to save  
battery power.  
DANGER  
NOTES:  
Ⅲ The video light can become extremely  
hot. Do not touch it either while in  
operation or soon after turning it off,  
otherwise serious injury may result.  
Ⅲ Do not place the camcorder into the  
carrying case immediately after using the  
video light, since it remains extremely  
hot for some time.  
● Even if the battery indicator (  
) does not blink if  
EOCRDING  
the battery pack’s charge is low, the camcorder may  
turn off automatically when you turn on the video  
light, or when you start recording with the video light  
turned on.  
● When the LIGHT OFF/AUTO/ON Switch is set to  
“AUTO”:  
Ⅲ When operating, keep a distance of  
about 30 cm. (1 ft.) between the video  
light and people or objects.  
Ⅲ Do not use near flammable or explosive  
materials.  
Ⅲ It is recommended that you consult your  
nearest JVC dealer for replacing the video  
light.  
•Depending on the lighting conditions, the video  
light may keep turning on and off. In this case,  
manually switch the light on or off using the  
LIGHT OFF/AUTO/ON switch.  
•While the “Sports” or “High Speed Shutter” mode  
(੬ pg. 25) is engaged, the light is likely to stay on.  
•While the “Twilight” mode (੬ pg. 25) is engaged,  
the light will not activate.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features  
22  
EN  
SNAPSHOT Button  
Snapshot  
Use your camcorder like a regular camera and take a  
snapshot, or several of them in succession.  
SELECT OPERATION MODE  
1 Set the Power Switch to “AUTO” or “PRO.”.  
TAKE SNAPSHOT  
2 Press SNAPSHOT.  
If you press during Record-Standby . . .  
.... a still image will be recorded for approx. 6 seconds,  
then the camcorder re-enters the Record-Standby  
mode.  
Power Switch  
If you press during Recording . . .  
.... a still image will be recorded for approx. 6 seconds,  
then the normal recording resumes.  
SNAPSHOT  
NOTE:  
After SNAPSHOT is pressed, there is a momentary camera  
shutter-type blackout together with the sound effect of a  
shutter closing, which is recorded together with the image.  
Display  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN23  
[Ex.: Fader]  
Fade in  
Fade/Wipe  
These effects let you make pro-style scene transitions.  
Fade- or wipe-in works at recording start, and fade- or  
wipe-out works at recording end or when you enter  
Record–Standby mode.  
SELECT OPERATION MODE  
1 Set the Power Switch to “PRO.”.  
Fade out  
ENGAGE FADE- OR WIPE-STANDBY  
Display  
2 MODE  
After 2 sec.  
Press EFFECT to cycle through the modes as shown at  
left. Once the desired mode appears, it is selected  
and reserved.  
MOSAIC  
•The selected mode’s name and its indication are  
displayed for approx. 2 seconds. Then the name  
disappears, and only the indication remains.  
START OR END RECORDING  
3 Press the Recording Start/Stop Button to activate fade-  
in/out or wipe-in/out.  
EOCRDING  
FADER  
TO CANCEL FADE- OR WIPE-STANDBY  
4 MODE  
MOSAIC  
SHUTTER  
SLIDE  
Press EFFECT repeatedly until “OFF” appears.  
•“OFF” is displayed for approx. 2 seconds and the  
fade/wipe standby mode is canceled.  
OFF  
(No indication)  
OFF  
FADER  
Fades in/out to a black screen.  
MOSAIC (Fader)  
Gradually turns/returns the picture into/from a mosaic  
pattern.  
SHUTTER (Wipe)  
A black screen moves in from the top and bottom, closing  
over the image like a shutter, or a new image pushes open  
the black screen vertically from the center.  
SLIDE (Wipe)  
A black screen moves in from the left to gradually cover  
the image, or a new image moves in from right to left.  
Power  
Switch  
EFFECT Button  
NOTES:  
● Pressing and holding the Recording Start/Stop Button  
allows you to vary the length for the image during fade  
in/out or wipe in/out.  
● The screen becomes slightly reddish when the Fade/  
Wipe is used with Sepia (੬ pg. 25).  
● With the Electronic fog filter mode (੬ pg. 25) engaged,  
the image fades in/out to a white screen.  
Recording Start/Stop  
Button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
24  
EN  
Display  
SEPIA  
Program AE With Special Effects  
After 2 sec.  
All you have to do to access any of the variety of shooting  
:
effects is press P.AE.  
SELECT OPERATION MODE  
1 Set the Power Switch to “PRO.”.  
SELECT MODE  
2 Press P.AE to cycle through the modes as shown on  
the left.  
•The selected mode’s name and its indication are  
displayed for approx. 2 seconds. Then the name  
disappears, and only the indication remains. The  
mode is activated.  
SEPIA  
SPORTS  
NOTES:  
:
ND ND EFFECT  
ND  
FG  
● Only one mode can be engaged at a time.  
● The screen becomes slightly reddish when the Fade/  
Wipe (੬ pg. 23) is used in the Sepia mode.  
● The screen becomes slightly dark in the High Speed  
Shutter mode. Use in well-lit situations.  
:
FG FOG  
TWILIGHT  
● In the “High Speed Shutter” or “Sports” modes, picture  
color may be adversely affected if the subject is lit by  
alternating discharge-type light sources such as  
flourescent or mercury-vapor lights.  
S1/2000  
NEGA/POSI  
OFF  
OFF  
(No indication)  
P.AE Button  
Power Switch  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN25  
Display  
Mode  
Display  
Mode  
1/2000 sec.  
High Speed Shutter  
Sepia  
S1/2000  
SEPIA  
Sepia  
High-Speed Shutter (1/2000s.)  
The scene being shot is recorded in sepia-tinted  
(reddish-brown) monochrome, giving the effect of  
an older movie. Use together with Wide (੬ pg. 29)  
for the authentic look of a classic Hollywood  
movie.  
Captures faster action than Sports mode.  
Nega/Posi  
NEGA POSI  
Nega/Posi (Negative/Positive)  
The colors of a picture are reversed.  
Sports  
SPORTS  
Sports  
High shutter speed clearly captures fast-moving  
action.  
NEGA POSI mode  
ND Effect  
:
ND ND EFFECT  
EOCRDING  
ND Effect  
A black mist darkens the picture, as when an ND  
filter is used. Helps to counter the effects of glare on  
the subject.  
Electronic  
Fog Filter  
:
FG FOG  
Electronic Fog Filter  
Makes the picture look misty white, as when an  
external fog filter is attached to the lens. Softens the  
image and gives it a “fantasy” look.  
Twilight  
TWILIGHT  
Twilight  
Dusk, twilight scenery, fireworks, etc., look more  
natural and dramatic. The following happens when  
Twilight mode is selected:  
•Auto gain control is turned off.  
•White Balance is set to “  
” (FINE day mode),  
but can also be manually changed to another  
mode (੬ pg. 34).  
•Auto Focus becomes available only in the range of  
10 m (33 ft.) to infinity. To focus when the subject-  
to-camera distance is less than 10 m (33 ft.), use  
manual focusing (੬ pg. 33).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
26  
EN  
Date/Time Insert  
This feature allows you to display the date and time in the  
viewfinder or on a connected color monitor, as well as to  
record them manually or automatically.  
SELECT OPERATION MODE  
1 Set the Power Switch to “PRO.”.  
ACCESS MENU SCREEN  
2 Press the Select Dial to display the Menu Screen.  
ACCESS “DATE/TIME DISP.” MENU  
3 Move the highlight bar to “DATE/TIME DISP.” by  
rotating the Select Dial while in Record-Standby.  
Then press it to display the DATE/TIME DISP. Menu.  
SELECT THE DESIRED MODE  
Select Dial  
Display  
Power Switch  
Menu Screen  
4 Move the highlight bar to the desired mode by  
rotating the Select Dial, then press it. The desired  
mode is activated.  
•You should have already performed the Date/Time  
Setting procedure (੬ pg. 11). If you haven’t, do so  
first.  
FOCUS  
EXPOSURE  
WIDE  
AUTO  
AUTO  
OFF  
S . LX  
OFF  
TITLE  
DATE TIME DISP.  
CLOSE MENU SCREEN  
5 The Menu Screen reappears with the highlight bar on  
4
RETURN  
“RETURN”. Then press the Select Dial to close the  
Menu Screen.  
DATE TIME DISP.  
DATE/TIME DISP.  
Menu  
AUTO DATE  
DATE  
NOTES:  
DISPLAY  
TIME  
DATE&TIME  
OFF  
● The selected display can be recorded.  
● If you do not want to record the display, select the OFF  
mode before shooting.  
EXIT  
AUTO DATE  
● Your camcorder automatically records the date for about  
5 seconds after recording is initiated in the following  
situations:  
FOCUS  
EXPOSURE  
WIDE  
AUTO  
AUTO  
OFF  
•After changing the date.  
S . LX  
OFF  
•After loading a cassette.  
•After Auto Date Record mode is selected by rotating  
the Select Dial.  
● In this mode, the date is replaced after 5 seconds with  
“AUTO DATE” but this is not recorded.  
TITLE  
DATE TIME DISP.  
4RETURN  
DEC 25 . 99  
AUTO DATE  
DEC 25 . 99  
(DATE)  
AM 10 : 25 : 00  
(TIME)  
DEC 25 . 99 AM 10 : 25 : 00  
(DATE&TIME)  
OFF  
(No indication)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN27  
Instant Titles  
The camcorder has eight preset titles in memory. You can  
superimpose one of them above a previously stored title as  
shown in the illustration to the left.  
Instant Titles can be displayed not only in English but also  
in French, Spanish and Portuguese. Change the setting in  
TITLE LANG. in the Menu Screen. (੬ pg. 28, 30).  
SELECT OPERATION MODE  
1 Set the Power Switch to “PRO.”.  
ACCESS MENU SCREEN  
2 Press the Select Dial to display the Menu Screen.  
ACCESS “TITLE” MENU  
3 Move the highlight bar to “TITLE” by rotating the  
Select Dial while in Record-Standby. Then press it to  
display the TITLE Menu.  
Select Dial  
Display  
Power Switch  
Menu Screen  
SELECT THE DESIRED MODE  
4 Move the highlight bar to the desired mode by  
rotating the Select Dial, then press it. The desired  
mode is activated.  
EOCRDING  
•If you wish to make the title indication disappear,  
select “OFF”.  
FOCUS  
AUTO  
EXPOSURE  
WIDE  
AUTO  
OFF  
S . LX  
TITLE  
OFF  
CLOSE MENU SCREEN  
DATE TIME DISP.  
5 The Menu Screen reappears with the highlight bar on  
“RETURN”. Then press the Select Dial to close the  
Menu Screen.  
4
RETURN  
TITLE  
TITLE Menu  
OFF  
HAPPY BIRTHDAY  
OUR VACATION  
MERRY CHRISTMAS  
A SPECIAL DAY  
HAPPY HOLIDAYS  
OUR NEW BABY  
WEDDING DAY  
CONGRATULATIONS  
EXIT  
FOCUS  
EXPOSURE  
WIDE  
AUTO  
AUTO  
OFF  
S . LX  
OFF  
TITLE  
DATE TIME DISP.  
4RETURN  
CONGRATULATIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
28  
EN  
Using Menu For Detailed Adjustment  
This camcorder is equipped with an easy-to-use,  
on-screen menu system that simplifies many of the more  
detailed camcorder settings.  
Select Dial  
SELECT OPERATION MODE  
1 Turn the Power Switch to “PRO.”.  
ACCESS MENU SCREEN  
2 Menu access depends on the function you select.  
If you select the functions from the “Menu Screen  
Available Using The Select Dial” described on  
pg. 29 . . .  
MENU Button  
Menu Screen 1  
Display  
(ex. Menu Screen available  
using the MENU Button)  
.... press the Select Dial. The Menu Screen appears.  
If you select the functions from the “Menu Screen  
Available Using The MENU Button” described on  
pg. 29 and 30 . . .  
4
NEXT  
M.W.B.  
AUTO  
ON  
.... press MENU. The Menu Screen appears.  
D . ZOOM  
TELE MACRO OFF  
DATE TIME  
SELECT FUNCTION  
TAPE LENGTH T30  
3 Rotate the Select Dial to place the highlight bar on  
the desired function.  
4
RETURN  
•To go from Menu Screen 1 to Menu Screen 2, rotate the  
Select Dial to “NEXT” and press it. To go back to Menu  
Screen 1 from Menu Screen 2, rotate the Select Dial to  
“BACK”, and press it.  
Menu Screen 2  
4
BACK  
REC. TIME  
INT. TIME  
OFF  
OFF  
•If the setting you want cannot be found in the Menu  
Screen, place the highlight bar on “RETURN”, then go  
to step 6.  
TALLY LAMP ON  
TITLE LANG. ENGLISH  
JLIP ID NO  
07  
DEMO MODE OFF  
MAKE SETTING  
4 Press the Select Dial. The setting procedure depends  
4RETURN  
on the function you select.  
If you select “FOCUS”, “EXPOSURE”, “TITLE”,  
“DATE/TIME DISP.” or “DATE/ TIME” . . .  
.... see respective pages (FOCUS: ੬ pg. 32, 33,  
EXPOSURE: ੬ pg. 31, TITLE: ੬ pg. 27,  
TITLE LANG.  
Setting Menu  
(ex. TITLE LANG.)  
ENGLISH  
FRENCH  
SPANISH  
DATE/TIME DISP.: ੬ pg. 26, DATE/TIME: ੬ pg. 11).  
PORTUGUESE  
If you select “WIDE”, “D.ZOOM”, “TELE MACRO”  
or “DEMO MODE” . . .  
.... the selected function’s parameter starts blinking.  
Rotate the Select Dial until the desired parameter  
appears. Go to step 5.  
EXIT  
If you select “JLIP ID NO.” . . .  
4
BACK  
REC. TIME  
INT. TIME  
OFF  
OFF  
.... press the Select Dial so that the number blinks, then  
rotate it until the desired number appears, and press  
it. Then rotate the Select Dial to move the highlight  
bar to “EXIT”.  
TALLY LAMP ON  
TITLE LANG. FRENCH  
JLIP ID NO  
07  
DEMO MODE OFF  
If you select any other functions . . .  
.... rotate the Select Dial to move the highlight bar to the  
desired setting.  
4RETURN  
• If you decide you want to return to the previous  
setting, rotate the Select Dial to move the highlight  
bar to “EXIT”.  
Normal Screen  
END SETTING  
5 Press the Select Dial. The Menu Screen reappears  
NOTE:  
with the highlight bar on “RETURN”.  
No menu functions except “FOCUS” and  
“EXPOSURE” are available while in the Record  
mode.  
CLOSE MENU SCREEN  
6 Press the Select Dial. The normal screen reappears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN29  
MENU SCREEN EXPLANATIONS  
Menu Screen Available Using The Select Dial  
Adjusts focus automatically.  
FOCUS  
AUTO  
MANU  
AUTO  
MANU  
OFF  
Allows you to adjust focus manually (੬ pg. 32, 33).  
Adjusts exposure automatically.  
EXPOSURE  
WIDE  
Allows you to adjust exposure manually (੬ pg. 31).  
Does not display black bars.  
Allows you to record black bars at the top and bottom of the screen  
to produce a cinema-like “wide-screen” effect.  
ON  
If a snapshot (੬ pg. 22) is taken while the camcorder is in the  
WIDE mode, the snapshot image is recorded using NORMAL  
mode without the black bars at the top and bottom of the screen.  
To record a subject in a darkly lit environment, when it is more  
convenient to shoot the subject with a brighter image even if the  
picture becomes slightly coarse.  
S.LX  
MAX  
To record a subject in a dimly lit environment, when it is more  
convenient to shoot with a less coarse picture although the  
subject becomes slightly dark. This setting is suitable for  
measuring sensitivity conforming to EIA-639 (EIA* Standard for  
Low Light Sensitivity Measurement).  
NORMAL  
EOCRDING  
*EIA : Electronic Industries Alliance  
Allows you to shoot dark scenes with no picture brightness  
adjustment.  
OFF  
TITLE  
Allows you to superimpose one of eight preset titles (੬ pg. 27).  
DATE/TIME DISP. Makes the date/time settings appear in the camcorder or on a connected monitor  
(੬ pg. 26).  
Menu Screen Available Using The MENU Button  
This Menu Screen cannot be accessed while recording.  
This camcorder’s Automatic Color Temperature system senses  
the color temperature of the ambient lighting for automatic  
white balance adjustment. However, precise color adjustment is  
not possible under the following conditions:  
• When an object is in various shades of the same color.  
• When a predominantly red or brown object is being shot outdoors.  
M.W.B.  
AUTO  
: FINE  
: CLOUD  
: HALOGEN  
In these cases, use the camcorder’s built-in preset filters for  
white balance adjustment (੬ pg. 34, 35).  
MWB  
D. ZOOM  
Allows you to use the Digital Zoom. By digitally processing and  
magnifying images, zooming is possible from 16 times (the optical  
zoom limit), to a maximum of 100 times digital magnification.  
ON  
Digital Zoom is not available. Only optical zoom (maximum  
16x magnification) can function. When set to “OFF” during  
Digital Zoom, zoom magnification changes to 16x.  
OFF  
OFF  
ON  
Usually the distance to a subject where the lens is in focus  
depends on the zoom magnification. Unless there is a distance of  
more than 1m (3.3 ft.) to the subject, the lens is out of focus at the  
maximum telephoto setting. When set to “ON”, you can shoot a  
subject as large as possible at a distance of approx. 60 cm (2 ft.).  
•Depending on the zoom position, the lens may go out of focus.  
TELE MACRO  
: Factory-preset  
CONTINUED ON NEXT PAGE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
30  
EN  
Menu Screen Available Using The MENU Button (cont.)  
DATE/TIME  
TAPE LENGTH  
REC TIME  
Allows you to set the current date and time (੬ pg. 11).  
Allows you to set the tape length depending on the tape used (੬ pg. 12).  
This feature allows you to set the parameters for Animation and Time-Lapse  
recording (੬ pg. 37).  
INT. TIME  
This feature allows you to set the parameters for Self-Timer (੬ pg. 36) and Time-  
Lapse recording (੬ pg. 36, 37).  
TALLY LAMP  
OFF  
ON  
The tally lamp remains off at all times.  
The tally lamp comes on to signal the start of recording.  
TITLE LANG.  
JLIP ID NO.  
DEMO MODE  
Allows you to select the language (ENGLISH, FRENCH, SPANISH or PORTUGUESE)  
of Instant Titles (੬ pg. 27).  
This number is necessary when connecting the camcorder to a device such as a computer  
using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 07.  
Automatic demonstration will not take place.  
OFF  
ON  
Demonstrates certain functions such as Fade/Wipe, etc. When  
“DEMO MODE” is set to “ON” and the Menu Screen is closed,  
the demonstration starts.  
NOTES:  
●When a tape whose Erase Protection tab is in the position that  
allows recording is loaded in the camcorder, demonstration is  
not available.  
●By turning off the camcorder or inserting a tape whose Erase  
Protection tab is in the position that allows recording into it,  
“DEMO MODE” is set to “OFF” automatically.  
●During the demonstration, all functions except zoom are  
disabled.  
: Factory-preset  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN31  
Exposure Control  
This feature automatically adjusts the iris for the best  
available picture quality, but you can override and make  
the adjustment manually.  
SELECT OPERATION MODE  
1 Set the Power Switch to “PRO.”.  
ACCESS MENU SCREEN  
2 Press the Select Dial to display the Menu Screen.  
ACCESS “EXPOSURE” MENU  
3 Rotate the Select Dial to move the highlight bar to  
“EXPOSURE” and press it.  
ACCESS MANUAL EXPOSURE  
4 Rotate the Select Dial to move the highlight bar to  
“MANU”, then press it. “00” (exposure control level  
counter) appears.  
Select Dial  
Display  
Power Switch  
Menu Screen  
ADJUST EXPOSURE  
5 To brighten the image . . .  
EOCRDING  
.... rotate the Select Dial upward. The exposure  
control level counter increases (maximum +06).  
FOCUS  
AUTO  
Go to step 6.  
To darken the image . . .  
.... rotate the Select Dial downward. The exposure  
control level counter decreases (maximum –06).  
EXPOSURE  
WIDE  
AUTO  
OFF  
S . LX  
TITLE  
OFF  
DATE TIME DISP.  
Go to step 6.  
4RETURN  
END ADJUSTMENT OF EXPOSURE  
6 Press the Select Dial. The Menu Screen reappears  
EXPOSURE  
EXPOSURE Menu  
with the highlight bar on “RETURN”.  
AUTO  
MANU  
CLOSE MENU SCREEN  
7 Press the Select Dial. The Menu Screen disappears  
and the exposure control level counter reappers to  
indicate the exposure is adjusted.  
EXIT  
NOTES:  
Manual Exposure  
Screen  
● To return to the factory setting, select “AUTO” in step 4.  
● To re-adjust exposure, repeat the procedure from step 2.  
00  
Exposure control  
level counter  
To brighten the image  
+
06  
–06  
To darken the image  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
32  
EN  
Focus detection zone  
Focusing  
AUTO FOCUS  
The camcorder’s Full Range AF system offers continuous  
shooting ability from close-up to infinity. However, correct  
focus may not be obtainable in the situations listed below  
(in these cases use manual focusing):  
•When two subjects overlap in the same scene.  
•When illumination is low.*  
•When the subject has no contrast (difference in bright-  
ness and darkness), such as a flat, one-color wall, or a  
clear, blue sky.*  
•When a dark object is barely visible in the viewfinder.*  
•When the scene contains minute patterns or identical  
patterns that are regularly repeated.  
•When the scene is affected by sunbeams or light  
reflecting off the surface of a body of water.  
•When shooting a scene with a high-contrast background.  
* The low-contrast warning “  
” appears.  
NOTES:  
● If the lens is smeared or blurred, accurate focusing is not  
possible. Keep the lens clean, wiping with a piece of soft  
cloth if it gets dirty. When condensation occurs, wipe  
with a soft cloth or wait for it to dry naturally.  
● When shooting a subject close to the lens, zoom out first  
(੬ pg. 18). If zoomed in in the auto focus mode, the  
camcorder could automatically zoom out depending on  
the distance between the camcorder and the subject.  
When Tele Macro (੬ pg. 29) is activated, the  
camcorder will not zoom out automatically.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN33  
MANUAL FOCUS  
NOTE:  
You should already have made the necessary viewfinder  
adjustments (੬ pg. 14). If you haven’t, do so before  
continuing.  
SELECT OPERATION MODE  
1 Set the Power Switch to “PRO.”.  
ACCESS MENU SCREEN  
2 Press the Select Dial to display the Menu Screen.  
ACCESS “FOCUS” MENU  
3 Press the Select Dial.  
ACCESS MANUAL FOCUS  
4 Rotate the Select Dial to move the highlight bar to  
“MANU”, then press it. “ ” and “ ” appear. The  
focus is locked at this point.  
Select Dial  
Display  
Power Switch  
Menu Screen  
ADJUST FOCUS  
5 To farther subject . . .  
ECORDING  
.... rotate the Select Dial upward. “ ” appears and  
blinks.  
FOCUS  
AUTO  
Go to step 6.  
EXPOSURE  
WIDE  
AUTO  
OFF  
To nearer subject . . .  
.... rotate the Select Dial downward. “ ” appears  
and blinks.  
S . LX  
TITLE  
OFF  
DATE TIME DISP.  
4RETURN  
Go to step 6.  
END ADJUSTMENT OF FOCUS  
FOCUS  
6 Press the Select Dial. The Menu Screen reappears  
FOCUS Menu  
AUTO  
MANU  
with the highlight bar on “RETURN”.  
CLOSE MENU SCREEN  
7 Press the Select Dial. The Menu Screen disppears and  
“
” reappears to indicate the focus is locked.  
EXIT  
NOTES:  
● To return to Auto Focus, select “AUTO” in step 4.  
● To re-adjust Manual Focus, repeat the procedure from  
step 2.  
Manual Focus Screen  
● Be sure to focus the lens in the maximum telephoto  
position when you use the Manual Focus mode. If you  
focus in on a certain subject in the wide-angle position,  
sharply focused images cannot be obtained when  
zoomed in because the depth-of-field is reduced at  
longer focal lengths.  
● When the focus level cannot be adjusted any farther or  
closer, “ ” or “ ” will blink.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
34  
EN  
White Balance Adjustment  
A term that refers to the correctness of color reproduction  
under various lighting. If the white balance is correct, all  
other colors will be accurately reproduced.  
The white balance is usually adjusted automatically.  
However, the more advanced camcorder operator would  
prefer to control this function manually and achieve a  
more professional color/tint reproduction.  
SELECT OPERATION MODE  
1 Set the Power Switch to “PRO.”.  
MENU Button  
ACCESS MENU SCREEN  
2 Press MENU. The Menu Screen appears.  
ACCESS WHITE BALANCE  
3 ADJUSTMENT  
Move the highlight bar to “M.W.B.” by rotating the  
Select Dial, then press it. The Menu Screen disap-  
pears and the M.W.B. Menu appears.  
Select Dial  
Display  
Power Switch  
Menu Screen  
SET FUNCTION PARAMETERS  
4 Move the highlight bar to the required white balance  
by rotating the Select Dial.  
“AUTO”  
4
NEXT  
M.W.B.  
AUTO  
ON  
The white balance is adjusted automatically. This is  
the factory preset position.  
D . ZOOM  
TELE MACRO OFF  
DATE TIME  
“
: FINE”  
When shooting outdoors on a sunny day.  
: CLOUD”  
When shooting outdoors on a cloudy day.  
: HALOGEN”  
TAPE LENGTH T30  
“
4
RETURN  
“
M.W.B.  
M.W.B. Menu  
When using a video light or other similar type of  
lighting.  
AUTO  
:
:
:
FINE  
CLOUD  
“MWB”  
HALOGEN  
MWB  
When shooting with the white balance already  
having been set on the subject (੬ pg. 35).  
EXIT  
CLOSE MENU SCREEN  
5 Press the Select Dial.  
The Menu Screen reappears with the highlight bar on  
“RETURN”. Press the Select Dial again to close the  
Menu Screen.  
To Return To Automatic White Balance . . .  
.... select “AUTO” in step 4. Or set the Power Switch to  
“AUTO”.  
NOTE:  
White balance cannot be used when Sepia (੬ pg. 25) is  
activated.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN35  
Manual White Balance Operation  
White paper  
If the camera is operating in PRO. mode, perform a  
Manual White Balance when shooting under various types  
of lighting.  
SELECT OPERATION MODE  
1 Follow steps 1 through 4 of the white balance  
adjustment (੬ pg. 34), and select “MWB”.  
SET MANUAL WHITE BALANCE  
2 Hold a sheet of plain white paper in front of the  
subject. Adjust zoom or position yourself so that the  
white paper fills the screen.  
ENTER SETTING  
3 Press the Select Dial until “MWB” begins blinking.  
•When the setting is completed, “MWB” stops  
blinking, and the Menu Screen reappears with the  
highlight bar on “RETURN”.  
CLOSE MENU SCREEN  
EOCRDING  
4 Press the Select Dial again to close the Menu Screen.  
Select Dial  
Display  
Power Switch  
To Change The Tint For Recording . . .  
.... in step 2, substitute colored paper for white. The white  
balance is adjusted based on the color, changing the  
tint. Red paper — deeper green; blue paper — orange;  
yellow paper — deeper purple.  
Menu Screen  
4
NEXT  
M.W.B.  
AUTO  
ON  
D . ZOOM  
TELE MACRO OFF  
DATE TIME  
TAPE LENGTH T30  
NOTES:  
● In step 2, it may be difficult to focus on the white paper  
in some circumstances. In such a case, adjust focus  
manually (੬ pg. 33).  
4
RETURN  
● A subject can be shot under various types of lighting  
conditions indoors (natural, flourescent, candlelight,  
etc.). Because the color temperature is different  
depending on the light source, the tint of the subject will  
differ depending on the white balance settings. Use this  
function for a more natural result.  
M.W.B.  
M.W.B. Menu  
AUTO  
:
:
:
FINE  
CLOUD  
HALOGEN  
MWB  
● Once you adjust white balance during Manual White  
Balance operation, the setting is retained even if the  
power is turned off or the battery removed.  
EXIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
36  
EN  
Self-Timer  
You can set the delay between pressing the Recording  
Start/Stop button and the actual start of recording. If you  
secure the camcorder, you (or whoever is operating the  
camcorder) can enter the scene before recording starts.  
NOTE:  
Make sure the Power Switch is set to “PRO.” and the  
camcorder is in the Record-Standby mode before  
performing the following steps.  
ACCESS MENU SCREEN  
MENU Button  
1 Press MENU.  
ACCESS “INT. TIME” MENU  
2 Rotate the Select Dial to move the highlight bar to  
“NEXT” in Menu Screen 1 and press it to display  
Menu Screen 2. Then, move the highlight bar to “INT.  
TIME” and press it.  
Select Dial  
Display  
Recording Start/Stop  
Button  
SET INTERVAL TIME  
3 Rotate the Select Dial to move the highlight bar to the  
desired time, then press it. The Menu Screen  
reappears with the highlight bar on “RETURN”.  
Menu Screen 1  
4
NEXT  
M.W.B.  
AUTO  
ON  
CLOSE MENU SCREEN  
D . ZOOM  
TELE MACRO OFF  
DATE TIME  
4 Press the Select Dial.  
TAPE LENGTH T30  
START DELAYED RECORDING  
5 Press the Recording Start/Stop Button. When the  
4
RETURN  
selected time has elapsed, recording begins auto-  
matically.  
Menu Screen 2  
4
BACK  
To Cancel Self-Timer . . .  
REC. TIME  
INT. TIME  
OFF  
OFF  
.... Before the recording begins, press the Recording Start/  
TALLY LAMP ON  
TITLE LANG. PORTUGUESE  
Stop Button to display “  
TIME” in the Menu Screen to “OFF”.  
”, then set “INT.  
JLIP ID NO  
07  
DEMO MODE OFF  
4RETURN  
INT. TIME  
REC TIME  
OFF  
OFF  
1 4S  
1 2S  
1 S  
15S  
30S  
1 MIN  
5 MIN  
5 S  
EXIT  
EXIT  
INT. TIME Menu  
REC TIME Menu  
INT. TIME indicator  
REC TIME indicator  
15S  
1S  
INT. TIME and REC TIME indications on the normal  
screen  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN37  
You can record sequentially at preset time spans.  
Leaving the camcorder aimed at a specific subject,  
you can record subtle changes over an extended  
period of time.  
Animation  
Time-Lapse  
You can give stationary scenes or objects an illusion  
of movement. This function allows you to shoot a  
series of pictures, each slightly different, of the same  
object for a brief period of time.  
NOTE:  
NOTE:  
Before performing the following steps, make sure  
that:  
Before performing the following steps, make sure  
that:  
● The Power Switch is set to “PRO.”.  
● The camcorder is in the Record-Standby mode.  
● The recording mode is set to “SP”.  
● The Power Switch is set to “PRO.”.  
● The camcorder is in the Record-Standby mode.  
● The recording mode is set to “SP”.  
ACCESS MENU SCREEN  
ACCESS MENU SCREEN  
1 Press MENU.  
1 Press MENU.  
SET RECORDING TIME  
SET INTERVAL BETWEEN  
2 Rotate the Select Dial to move the highlight bar 2 RECORDINGS  
to “NEXT” in Menu Screen 1 and press it to  
display Menu Screen 2. Then, move the  
Rotate the Select Dial to move the highlight bar  
to “NEXT” in Menu Screen 1 and press it to  
display Menu Screen 2. Then, move the  
highlight bar to “INT. TIME” and press it. The  
INT. TIME Menu appears. Rotate the Select Dial  
to move the highlight bar to the desired time,  
then press it. The Menu Screen reappears.  
highlight bar to “REC TIME” and press it. The  
REC TIME Menu appears. Rotate the Select Dial  
to move the highlight bar to the desired time,  
then press it. The Menu Screen reappears with  
the highlight bar on “RETURN”. Press the Select  
Dial again to close the Menu Screen.  
ECORDING  
SET RECORDING TIME  
3 Rotate the Select Dial to move the highlight bar  
START RECORDING  
3 Press the Recording Start/Stop Button after  
to “REC TIME”, then press it. The REC TIME  
Menu appears. Rotate the Select Dial to move  
the highlight bar to the desired time, then press  
it. The Menu Screen reappears with the  
highlight bar on “RETURN”. Press the Select  
Dial again to close the Menu Screen.  
focusing on the subject. The recording stops  
automatically after the selected period of time.  
ASSEMBLE SERIES OF PICTURES  
4 Repeat step 3 for the desired number of  
pictures.  
START TIME-LAPSE RECORDING  
RELEASE ANIMATION MODE  
4 Press the Recording Start/Stop Button. Recording  
5 Set “REC TIME” in the Menu screen to “OFF”.  
and intervals alternate automatically.  
RELEASE TIME-LAPSE MODE  
NOTES:  
5 To release when “  
” is displayed, set  
● For best results, make sure the camcorder is  
secured when shooting in Animation or Time-  
Lapse mode.  
“REC TIME” and “INT. TIME” in the Menu  
Screen to “OFF”. To release when  
“
” and “  
press the Recording Start/Stop Button to display  
”, then set “REC TIME” and “INT.  
TIME” in the Menu Screen to “OFF”.  
” are not displayed,  
● Fade- or wipe-in/out cannot be performed during  
Animation or Time-Lapse shooting.  
“
● Before performing other operations following  
Animation or Time-Lapse recording, make sure  
the Animation or Time-Lapse mode is deactivated.  
● Self-Timer, Animation and Time-Lapse are  
canceled when the power is shut off or when the  
cassette is ejected.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Basic Playback  
38  
EN  
REW (2) Button  
FF (3) Button  
LOAD A CASSETTE  
1 Slide EJECT to open the cassette holder, then insert  
the cassette with the label facing out. Press PUSH to  
ensure the holder is closed and locked.  
PLAY/PAUSE (4/6)  
Button  
SELECT MODE  
2 Set the Power Switch to “PLAY”. The power lamp  
lights.  
STOP (5) Button  
PLAY BACK  
3 Press PLAY/PAUSE (  
4/6). The playback picture  
appears.  
STOP PLAYBACK  
4 Press STOP (5).  
Rewind or Fast-Forward the tape  
Press REW (2) to rewind, or FF (3) to fast-forward the  
tape during Stop mode.  
EJECT Switch  
NOTES:  
Power lamp  
● The camcorder shuts off automatically after about 5  
minutes in Stop mode. To turn on again, set the Power  
Switch to “POWER OFF”, then to “PLAY”.  
● During Stop, Fast-Forward or Rewind mode, none of the  
indications are displayed in the viewfinder.  
● If a blank portion on the tape is played back, the screen  
may become black. This is not a malfunction.  
Power Switch  
Battery pack remaining power indicator  
Tape counter  
Recording mode indicator  
SP  
Tape running  
:
:
M 1 23 45  
indicator  
4
3
:Playback  
:Fast-Forward/  
Forward Search  
:Rewind/Reverse  
Search  
2
6
:Still Playback  
Viewfinder indications  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Features  
EN39  
Tracking  
This function can be used to eliminate noise bars that  
appear on-screen during playback. Initial setting is Auto  
Tracking. Manual Tracking is also available.  
ACTIVATE MANUAL TRACKING  
1 Press P.AE and EFFECT simultaneously. Then, press  
P.AE or EFFECT as many times as necessary until the  
noise bars disappear.  
•To return to Auto Tracking, press P.AE and EFFECT  
simultaneously. “AT” blinks. When Auto Tracking  
finishes, the indication disappears.  
NOTES:  
● When noise bars appear during playback, the  
camcorder enters the Auto Tracking mode and “AT” is  
displayed.  
● Manual Tracking may not work with tapes recorded on  
other VCRs or camcorders.  
P.AE Button  
EFFECT Button  
YABCK  
PAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Features (cont.)  
40  
EN  
Power Switch  
FEATURE: Still Playback  
PURPOSE:  
To pause during playback.  
OPERATION:  
1) Press PLAY/PAUSE (4/6) during playback.  
2) To resume normal playback, press PLAY/PAUSE  
(4/6) again.  
NOTE:  
Noise bars appear and pictures may become  
monochrome during Still Playback. This is normal.  
FEATURE: Shuttle Search  
PURPOSE:  
To allow high-speed search in either direction.  
OPERATION:  
1) Press FF (3) to search forward or press REW (2  
to reverse during playback.  
)
REW (2) Button  
FF (3) Button  
2) To resume normal playback, press PLAY/PAUSE  
(4/6).  
NOTES:  
PLAY/PAUSE (4/6)  
Button  
● During playback, press and hold REW (2) or  
FF (3). The search continues as long as you hold  
the button. Once you release it, normal playback  
resumes.  
STOP (5) Button  
● Noise bars appear and pictures may become  
monochrome or darken during Shuttle Search. This  
is normal.  
COUNTER R/M Button  
FEATURE: Counter Memory Function  
PURPOSE:  
To make it easier to locate a specific tape segment.  
OPERATION:  
1) Press COUNTER R/M and hold for more than  
1 second. The counter resets to “0:00:00”.  
2) Press COUNTER R/M for less than 1 second. “M”  
appears.  
3) After recording or playback, press STOP (5), then  
REW (2). The tape automatically stops at or close  
to 0:00:00.  
4) Press PLAY/PAUSE (4/6) to start playback.  
NOTES:  
● The counter memory functions in the Fast-Forward  
and Rewind modes.  
● To disable the Counter Memory Function, press  
COUNTER R/M for less than 1 second so that “M”  
disappears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Using The Cassette Adapter  
Cassette Adapter (VHS Playpak)  
EN41  
Use this to play back a VHS-C video cassette recorded  
with this camcorder on a VHS VCR. It is fully compatible  
with any VHS video cassette recorder. The C-P7U adapter  
is battery powered and automatically performs tape  
loading and unloading.  
INSERT BATTERY  
1 Slide the battery cover up to remove it, and install  
one “AA(R6)” size battery as shown in the  
illustration at left, then reattach the cover.  
VCR  
INSERT CASSETTE IN ADAPTER  
2 Slide the latch to open the adapter compartment  
door, then insert the cassette and close the  
compartment door.  
Compartment door  
PLAY BACK ON CONNECTED VCR  
3 Load the cassette adapter into the VCR and play the  
tape back as you would any other.  
REMOVE CASSETTE FROM ADAPTER  
4 Slide the latch and the compartment door opens  
automatically. This may take around 10 seconds. Do  
not attempt to force the adapter open. Then, insert  
your finger in the hole on the underside of the  
adapter as shown in the illustration at left, and push  
up and remove the cassette.  
YABCK  
PAL  
Sliding latch  
NOTES:  
Compact video cassette  
● During tape loading and unloading, do not touch the  
reels for safety and tape protection.  
● During special-effect playback (slow motion, still frame,  
etc.), the picture may vibrate or noise bars may appear  
on the screen.  
Reels  
● To record on a VCR using a compact cassette and the  
adapter, cover the adapter’s recording safety hole with  
adhesive tape.  
Recording safety hole  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Basic Connections And Tape Dubbing  
These are some basic types of connections. When making connections, refer also to your VCR and TV  
instruction manuals.  
42  
EN  
A. Connection to a TV or VCR equipped with an S-VIDEO  
Basic Connections  
Use optional Video and Audio cables.  
TV  
To Video Output  
Video cable (optional)  
To VIDEO IN  
To AUDIO IN  
To TV or VCR  
Audio cable (optional)  
To Audio Output  
VCR  
Connector cover*  
A. Connection to a TV or VCR equipped with an S-VIDEO  
Connection For Tape Dubbing  
Use optional Video and Audio cables.  
Power Switch  
TV  
PLAY/PAUSE (4/6)  
Button  
To Video  
Output  
To  
Video cable  
(optional)  
VIDEO IN  
VCR (Recording deck)  
Audio cable (optional)  
To Audio Output  
To AUDIO IN  
Connector cover*  
* When connecting the cables, open this cover.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN43  
Basic Connections  
Tape Dubbing  
CONFIRM POWER-OFF STATUS  
CONNECT EQUIPMENT  
1 Make sure the camcorder’s power is off.  
1 Following the illustration on pg. 42, connect the  
camcorder and the VCR.  
CONNECT CAMCORDER TO TV OR  
2 VCR  
PREPARE FOR DUBBING  
2 Set the camcorder’s Power Switch to “PLAY”,  
Pull out the connector cover and open it.  
turn on the VCR’s power, and insert the  
appropriate cassettes in the camcorder and the  
VCR.  
Connect as shown in the illustration (੬ pg. 42).  
If using a VCR . . . go to step 3.  
If not . . . go to step 4.  
SELECT VCR MODE  
3 Engage the VCR’s AUX and Record-Pause  
CONNECT VCR OUTPUT TO TV  
3 INPUT  
modes.  
Refer to your VCR’s instruction manual.  
FIND EDIT-IN POINT  
4 Engage the camcorder’s Play mode to find a spot  
SUPPLY POWER  
4 Turn on the camcorder, the VCR and the TV.  
just before the edit-in point. Once it is reached,  
press PLAY/PAUSE (4/6) on the camcorder.  
SELECT MODE  
5 Set the VCR to its AUX input mode, and set the  
START EDITING  
5 Press PLAY/PAUSE (  
TV to its VIDEO mode.  
4/6) on the camcorder and  
engage the VCR’s Record mode.  
NOTES:  
YABCK  
● It is recommended to use the AC Power Adapter/  
Charger as the power supply instead of the battery  
pack (੬ pg. 9).  
STOP EDITING TEMPORARILY  
6 Engage the VCR’s Record-Pause mode and press  
PAL  
PLAY/PAUSE (4/6) on the camcorder.  
● To monitor the picture and sound from the  
camcorder without inserting a tape, set the  
camcorder’s Power Switch to “CAMERA” (“AUTO”  
or “PRO.”), then set your TV to the appropriate  
input mode.  
EDIT MORE SEGMENTS  
7 Repeat steps 4 through 6 for additional editing,  
then stop the VCR and camcorder when  
finished.  
● Make sure you adjust the TV sound volume to its  
minimum level to avoid a sudden burst of sound  
when the camcorder is turned on.  
● If you have a TV or speakers that are not specially  
shielded, do not place the speakers adjacent to the  
TV as interference will occur in the camcorder  
playback picture.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USER MAINTENANCE  
44  
EN  
LENS COVER Open/Close Ring  
After Use  
Set the Power Switch to “POWER OFF” to turn off  
1 the camcorder.  
Slide EJECT to open the cassette holder, then remove  
2 the cassette.  
Close and lock the cassette holder by pressing PUSH.  
Slide BATTERY RELEASE to remove the battery pack.  
Turn the LENS COVER Open/Close Ring to close  
3
4
BATTERY RELEASE  
Set to “POWER OFF”.  
5 the lens cover.  
Cleaning The Camcorder  
CLEAN EXTERIOR  
1 Wipe gently with a soft cloth.  
•Put cloth in diluted mild soap and wring it well to  
wipe off heavy dirt, then wipe again with a dry  
cloth.  
Remove.  
CLEAN LENS  
2 Blow it with a blower brush, then wipe it gently with  
PUSH  
EJECT  
lens cleaning paper.  
REMOVE EYEPIECE  
3 Turn the eyepiece counterclockwise and pull it out.  
CLEAN VIEWFINDER  
4 Remove dust using a blower brush.  
RE-ATTACH EYEPIECE  
5 Re-attach the eyepiece and turn it clockwise.  
NOTES:  
● Avoid using strong cleaning agents such as benzine or alcohol.  
● Cleaning should be done only after the battery pack has been removed or other power units have been  
disconnected.  
● Mold may form if the lens is left dirty.  
● When using a cleaner or chemically treated cloth, refer to the cautions that came with it.  
● When removing the eyepiece, be sure to hold the viewfinder securely.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
If, after following the steps in the chart below, the problem still exists, please consult your JVC dealer.  
EN45  
The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio,  
etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery  
pack, AC Power Adapter/Battery Charger, etc.) and clock battery; and then re-connect it and proceed as  
usual from the beginning.  
SYMPTOM  
POSSIBLE CAUSE(S)  
POWER  
No power is supplied.  
● The battery pack has not been attached correctly  
(੬ pg. 8).  
● The battery pack is not charged (੬ pg. 8).  
● The power supply has not been correctly connected  
(੬ pg. 9).  
The power suddenly goes off and  
does not come back on by itself.  
● The battery pack has completely discharged.  
● Remove the cassette and disconnect the power source, then  
after a few minutes, try turning the power back on. If it still  
does not come on, consult your nearest JVC dealer.  
RECORDING  
Recording cannot be performed.  
● Make sure the Erase Protection tab is in the position that  
allows recording. If not, slide the tab. Some cassettes have  
removable tabs. If the tab has been removed, cover the  
hole with adhesive tape.  
Recording does not start.  
● The camcorder Power Switch has not been set to  
“CAMERA” (“AUTO“ or “PRO“.) (੬ pg. 16).  
Animation or Time-Lapse is not  
available.  
● Before recording in the Animation mode at the very  
beginning of a tape, set the camcorder to the Recording  
mode for about 5 seconds, so that the tape runs smoothly.  
Using the Fade-in function at this point is a good way to  
begin an animated program (੬ pg. 37).  
PLAYBACK  
The tape is running, but there is no  
playback picture.  
● The TV has not been set to its VIDEO mode or channel.  
● If A/V connection is used, the TV’s VIDEO/TV Switch has  
not been set to VIDEO.  
Playback picture is blurred or  
interrupted.  
● The video heads are dirty or worn out. Consult your nearest  
JVC dealer for head cleaning or replacement.  
The counter indication is blurred  
during Still playback.  
● This is normal.  
TAPE TRANSPORT  
The tape stops during fast-forward or  
rewind.  
● The Counter Memory Function has been activated  
(੬ pg. 40).  
Rewinding or fast-forwarding cannot  
be performed.  
● The tape is already fully wound on one reel or the other.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING (cont.)  
46  
EN  
SYMPTOM  
POSSIBLE CAUSE(S)  
OTHER  
During recording, the indications do  
not appear.  
● Press DISPLAY for longer than 1 second to make the  
indications appear (੬ pg. 17).  
The tape will not eject.  
● The battery pack is running low.  
Some functions are not available.  
● The Power Switch is set to “AUTO”.  
● Certain combinations of modes or effects are not possible  
to use.  
Vertical white lines appear when  
shooting a very bright object.  
● This sometimes occurs when the contrast between the  
background and the object is great. It is not a defect of the  
camcorder.  
Bright, crystal-shaped spots appear in  
the viewfinder.  
● Sunlight is directly entering the lens. This is not a defect of  
the camcorder.  
Colored bright spots appear all over  
the viewfinder.  
● The viewfinder is made with high-precision technology.  
However, black spots or bright spots of light (red, green or  
blue) may appear constantly in the viewfinder. These spots  
are not recorded on the tape. This is not due to any defect  
of the unit. (Effective dots: more than 99.99 %.)  
The viewfinder and the lens have  
become dirty (ex. fingerprints).  
● Wipe them gently with a soft cloth. Gently wipe in a  
semicircular motion, as wiping strongly spreads the stain  
and it won’t come out easily.  
The picture is blurred in the Quick  
Review or Retake mode.  
● This is normal while recording in the EP mode. Some noise  
may be present while recording in the SP mode (੬ pg. 12).  
An error number (i.e. E03) appears.  
● Turn the camcorder’s power off, then disconnect the power  
source. After a few minutes, try turning the power on again.  
If the error number still appears in the viewfinder, consult  
your nearest JVC dealer.  
The image is out of focus.  
● The diopter needs to be adjusted (੬ pg. 14).  
● The scene being shot is adversely affecting the operation of  
Auto Focus (੬ pg. 32).  
The date and time displays  
disappear.  
● If you remove the power source from the camcorder while  
the power is on, all settings and selections are erased. Make  
sure to turn the camcorder’s power off before disconnecting  
the power source.  
The wrong date and time are  
displayed/recorded.  
● If you have not performed Date/Time Setting (੬ pg. 11),  
the date and time are not displayed/recorded correctly. Be  
sure that Date/Time setting is carried out.  
Even though the lens cover is open,  
the Lens Cover Warning indicator  
blinks.  
● The Lens Cover Warning indicator may blink when the  
camcorder is used in dark areas, regardless of the position  
of the lens cover.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX Indications  
EN47  
1
2
3
4
5
30MIN  
REC SP  
T30  
6
#
$
^
FADER  
7
9
%
&
2
01  
8
0
LENS COVER  
PAUSE  
1X  
a
15S  
5S  
*
TAPE END  
(
!
MERRY CHRISTMAS  
b
@
:
:
DEC 25. 99 AM 11 45 18  
1 Cassette Warning/  
# Battery Pack Remaining Power Indicator  
Changes as follows according to the battery  
pack’s remaining power level:  
Tape Remaining Time .......................... ੬ pg. 17  
When no cassette is inserted: the cassette (  
warning blinks.  
)
“
”. When the power is  
When the Erase Protection tab is not in the position  
almost gone, the indicator “ ” blinks (battery  
that allows recording: the cassette (  
) warning  
power warning), then the unit shuts off. Replace  
the battery pack with a fully charged one.  
Note: The symbol containing 3 darkened squares —  
— does not necessarily mean that the battery  
pack is fully charged.  
lights. Otherwise, the tape remaining time is  
displayed and the tape remaining time warning  
blinks when the tape is about to reach its end.  
When the Power Switch is set to “PLAY” and a  
tape is loaded: the cassette (  
regardless of the Erase Protection tab’s position.  
) mark is displayed  
$ Focus Indicator .................................... ੬ pg. 33  
% Exposure Control Level Counter ........... ੬ pg. 31  
^ White Balance Mode Indicator ............ ੬ pg. 34  
2 Recording Mode (SP/EP) Indicator ........ ੬ pg. 12  
3, 7 Program AE Indicator ...................... ੬ pg. 24  
Displayed at 3 for approx. 2 seconds when  
Program AE with special effects is switched from  
one mode to another by pressing P.AE., then only  
the indicator remains at 7.  
& •Record–Standby Mode Indicator ....... ੬ pg. 16  
•Lens Cover Warning:  
LENS COVER .................................... ੬ pg. 17  
* Clock Battery Warning  
Blinks for approx. 10 seconds when the power is  
turned on. This display also blinks when the clock  
(lithium) battery is either not installed or has  
discharged. Install or replace the old battery with  
a new one (੬ pg. 10).  
3, 8 Fade/Wipe-Standby Indicator .......... ੬ pg. 23  
Displayed at 3 for approx. 2 seconds when the  
Fade/Wipe is switched from one effect to another  
by pressing EFFECT, then only the indicator  
remains at 8.  
4 Tape Length Indicator .......................... ੬ pg. 12  
5 Zoom Indicator Bar ............................. ੬ pg. 18  
( •Tape End Display: TAPE END ............ ੬ pg. 17  
Appears when the end of the tape is reached  
during playback, recording or fast-forward.  
•Condensation Warning:  
Zoom Level Indicator  
Approximate Zoom Ratio  
When this indication appears, all functions  
except tape eject and power on/off are disabled.  
Turn the unit off (without removing the power  
source) for a few hours, and when you turn it on  
again the indication should disappear.  
6 Recording Indicator ............................. ੬ pg. 16  
9 Picture Stabilizer Indicator ................... ੬ pg. 20  
0 Interval Timer/Recording Time Indicator ੬ pg. 36  
! Instant Title Display ............................. ੬ pg. 27  
@ Date/Time Display ............................... ੬ pg. 26  
•Head Clog Warning:  
Appears if dirty heads are detected during  
recording. In such a case, use the optional  
Cleaning Cassette. If, after using it, the problems  
still exist, consult your nearest JVC dealer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX Controls, Connectors And Indicators  
48  
EN  
u
t 2  
1
i
q
p
Q
W
o
w e  
3
4 5 6  
E
7
8
9
!
0
@
#
^
$
%
R
r
&
* y (  
)
T
Y
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN49  
Controls  
Connectors  
1 Diopter Adjustment Control ................. ੬ pg. 14  
2 Lens Cover Open/Close Ring................ ੬ pg. 16  
q DC IN Jack ............................................ ੬pg. 9  
The connectors w to r are located beneath the  
cover.  
w Video Output Connector ...................... ੬ pg. 42  
e Audio Output Connector ..................... ੬ pg. 42  
3 Video Light Switch  
[LIGHT OFF/AUTO/ON] ...................... ੬ pg. 21  
4 Snapshot Button [SNAPSHOT] ............. ੬ pg. 22  
5 Power Zoom Lever [T/W]..................... ੬ pg. 18  
r J Terminal [JLIP (Joint Level Interface Protocol)  
Connector]  
6 Picture Stabilizer Button  
•It is used to connect the camcorder to a device  
such as a personal computer.  
For further details consult your nearest JVC  
dealer.  
[P.STABILIZER] ..................................... ੬ pg. 20  
7 Program AE Button [P.AE]..................... ੬ pg. 24  
8 Fade/Wipe Button [EFFECT] ................. ੬ pg. 23  
•JLIP-controlled editing from camcorder to VCR  
is not possible if the VCR is not equipped with a  
J terminal.  
9 •Rewind Button [2, REW] ................ ੬ pg. 38  
•Retake Rewind Button [RETAKE R]..... ੬ pg. 19  
•Quick Review Button [ R] ............. ੬pg. 19  
0 •Fast-Forward Button [3, FF] ............ ੬pg. 38  
•Retake Forward Button [RETAKE F] .... ੬ pg. 19  
Indicators  
! Stop Button [5, STOP] ......................... ੬pg. 38  
@ Play/Pause Button  
t Tally Lamp ........................................... ੬ pg. 16  
y Power Lamp ........................................ ੬ pg. 16  
[
4/6, PLAY/PAUSE]............................. ੬ pg. 38  
Other Parts  
# Select Dial [+, –, PUSH] ................ ੬ pg. 11, 28  
$ MENU/DISPLAY Button ................. ੬ pg. 17, 28  
u Battery Pack Mount ............................... ੬pg. 8  
i Viewfinder ........................................... ੬ pg. 14  
o Grip Strap ............................................ ੬ pg. 14  
% •Counter Reset/Memory Button  
[COUNTER R/M] .............................. ੬ pg. 40  
•Recording Mode Button [SP/EP] ......... ੬ pg. 12  
p Camera sensor  
^ EJECT Switch ....................................... ੬pg. 13  
& Recording Start/Stop Button.................. ੬ pg. 16  
* Power Switch ................................ ੬pg. 16, 38  
Be careful not to cover this area; a sensor  
necessary for shooting is built-in here.  
Q Video Light .......................................... ੬ pg. 21  
W Microphone  
( Battery Release Switch  
For use when recording.  
[BATTERY RELEASE] .............................. ੬ pg. 8  
) PUSH Button ....................................... ੬pg. 13  
E Eyepiece .............................................. ੬ pg. 44  
R Shoulder Strap Eyelets .......................... ੬ pg. 15  
T Clock Battery Slot ................................ ੬ pg. 10  
Y Tripod Mounting Socket ....................... ੬ pg. 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX Terms  
50  
EN  
A
P
AC Power Adapter/Charger ..................... ੬ pg. 8, 9  
Animation Recording ................................ ੬ pg. 37  
Auto Date Record ..................................... ੬ pg. 26  
Auto Focus ............................................... ੬ pg. 32  
Auto Shut off ...................................... ੬ pg. 17, 38  
Picture Stabilizer ...................................... ੬ pg. 20  
Power Switch Position .............................. ੬ pg. 16  
Program AE With Special Effects................ ੬ pg. 24  
Provided Accessories .................................. ੬pg. 6  
Q
B
Quick Review .......................................... ੬pg. 19  
Battery Pack ..................................... ੬ pg. 8, 9, 51  
R
C
Record-Standby ........................................ ੬ pg. 16  
Recording Mode....................................... ੬ pg. 12  
Retake...................................................... ੬pg. 19  
Rewind The Tape ...................................... ੬ pg. 38  
Car Battery ................................................. ੬ pg. 9  
Charge Marker............................................ ੬ pg. 9  
Charge The Battery Pack ............................. ੬ pg. 8  
Clean The Camcorder ............................... ੬ pg. 44  
Clock (Lithium) Battery ............................. ੬ pg. 10  
Connections ......................................... ੬ pg. 9, 42  
S
Self-Timer ................................................. ੬pg. 36  
Sepia ....................................................... ੬ pg. 25  
Shoulder Strap Attachment........................ ੬ pg. 15  
Shuttle Search........................................... ੬pg. 40  
Snapshot Mode ........................................ ੬pg. 22  
Specifications ........................................... ੬pg. 53  
Still Playback............................................ ੬pg. 40  
Super LoLux (S.LX).................................... ੬ pg. 29  
D
Date/Time Display .................................... ੬ pg. 26  
Date/Time Settings .................................... ੬ pg. 11  
Demonstration Mode ................................ ੬ pg. 30  
Digital Zoom ............................................ ੬ pg. 29  
Discharge The Battery Pack ........................ ੬ pg. 8  
Diopter Adjustment .................................. ੬ pg. 14  
Dubbing................................................... ੬ pg. 43  
T
Tally ......................................................... ੬pg. 30  
Tape Counter ............................................ ੬pg. 38  
Tape Length Setting................................... ੬ pg. 12  
Tele Macro ............................................... ੬pg. 29  
Time-Lapse Shooting ................................ ੬ pg. 37  
Tracking ................................................... ੬pg. 39  
Tripod Mounting....................................... ੬ pg. 15  
Twilight .................................................... ੬pg. 25  
E
Electronic Fog Filter Mode ........................ ੬ pg. 25  
Erase Protection ........................................ ੬ pg. 13  
Exposure Control ...................................... ੬ pg. 31  
F
Fade-In/Out .............................................. ੬ pg. 23  
Fast-Forward Tape .................................... ੬ pg. 38  
U
G
Unload A Tape ......................................... ੬pg. 13  
Grip Adjustment ....................................... ੬ pg. 14  
V
H
Video Light ............................................... ੬pg. 21  
Viewfinder Indications .............................. ੬ pg. 47  
High Speed Shutter Mode ......................... ੬ pg. 25  
I
W
Instant Titles ............................................. ੬ pg. 27  
White Balance.................................... ੬pg. 34, 35  
Wide Mode .............................................. ੬pg. 29  
Wipe In/Out ............................................. ੬pg. 23  
L
Load A Tape ............................................. ੬ pg. 13  
Z
M
Zooming .................................................. ੬pg. 18  
Manual Focus ........................................... ੬ pg. 33  
Menu Screen ..................................... ੬ pg. 29, 30  
N
ND Effect Mode........................................ ੬ pg. 25  
Nega/Posi Mode ....................................... ੬ pg. 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTIONS  
EN51  
DANGER:  
Video Light  
General Battery Precautions  
•When the C-P6U or C-P7U (cassette adapter) is not  
functioning even when correctly operated, the battery  
is exhausted. Replace it with a fresh one.  
• The video light becomes extremely hot. Do not touch  
it either while in operation or soon after turning it off,  
otherwise serious injury may result.  
•Use only the following battery:  
C-P6U or C-P7U ....................... AA (R6) size  
• Do not place the camcorder into the carrying case  
immediately after using the video light, since it  
remains extremely hot for some time.  
• When operating, keep a distance of about 30 cm  
(1 ft.) between the video light and people or object.  
• Do not use near flammable or explosive materials.  
• It is recommended that you consult your nearest JVC  
dealer for replacing the video light.  
Please make note of the following rules for battery use.  
When misused, the battery can leak or explode.  
1. Refer to the C-P6U/C-P7U instructions when  
replacing the battery.  
2. Do not expose the battery to excessive heat as it can  
leak or explode.  
3. Do not dispose of the battery in a fire.  
4. Remove the battery from the unit if it is to be stored  
for an extended period to avoid battery leakage which  
can cause malfunctions.  
When using the AC Power Adapter/Charger in areas  
other than the USA  
Ⅲ The provided AC Power Adapter/Charger features  
automatic voltage selection in the AC range from  
110 V to 240 V.  
Battery Packs  
The supplied battery pack is a  
nickel-cadmium battery. Before using  
the supplied battery pack or an optional  
battery pack, be sure to read the  
following cautions:  
USING HOUSEHOLD AC PLUG ADAPTER  
In case of connecting the unit’s power cord to an AC  
wall outlet other than American National Standard C73  
series type use an AC plug adapter, called a “Siemens  
Plug”, as shown.  
For this AC plug adapter, consult your nearest JVC  
1. To avoid hazard . . .  
dealer.  
....do not burn.  
Plug adapter  
....do not short-circuit the terminals.  
....do not modify or disassemble.  
....use only specified chargers.  
Terminals  
2. To prevent damage and prolong service life . . .  
....do not subject to unnecessary shock.  
....avoid repeated charging without fully discharging.  
....charge in an environment where temperatures are  
within the tolerances shown in the chart below.  
This is a chemical reaction type battery—cooler  
temperatures impede chemical reaction, while  
warmer temperatures can prevent complete  
charging.  
INFORMATION  
This device complies with Part 15 of FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) this device must accept any interference received,  
including interference that may cause undesired  
operation. Change or modifications not approved by the  
party responsible for compliance could void the user’s  
authority to operate the equipment. This equipment has  
been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential  
installation. This equipment generates, uses, and can  
radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause  
harmful interference to radio communications.  
However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does  
cause harmful interference to radio or television  
reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to  
correct the interference by one or more of the following  
measures:  
....store in a cool, dry place. Extended exposure to  
high temperatures will increase natural discharge  
and shorten service life.  
....avoid prolonged uncharged storage.  
....remove from charger or powered unit when not in  
use, as some machines use current even when  
switched off.  
NOTES:  
● It is normal for the battery pack to be warm after  
charging, or after use.  
Temperature Range Specifications  
Charging ................ 10°C to 35°C (50°F to 95°F)  
Operation .............. 0°C to 40°C (32°F to 104°F)  
Storage .................. –10°C to 30°C (14°F to 86°F)  
● Recharging time is based on room temperature of 20°C  
(68°F).  
Reorient or relocate the receiving antenna.  
Increase the separation between the  
equipment and receiver.  
● The lower the temperature, the longer recharging  
takes.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTIONS (cont.)  
52  
EN  
4. To protect the unit, DO NOT . . .  
Cassettes  
.... allow it to become wet.  
.... drop the unit or strike it against hard objects.  
.... subject it to shock or excessive vibration during  
transportation.  
To properly use and store your cassettes, be sure to read  
the following cautions:  
.... keep the lens directed at extremely bright objects  
for long periods.  
.... direct the eyepiece of the viewfinder at the sun.  
.... carry it by holding the viewfinder. Be sure to hold  
the main unit with both hands or use the grip.  
.... swing it excessively when using the shoulder  
strap.  
1. During use . . .  
.... make sure the cassette bears the VHS-C mark.  
.... be aware that recording onto prerecorded tapes  
automatically erases the previously recorded  
video and audio signals.  
.... make sure the cassette is positioned properly  
when inserting.  
.... do not load and unload the cassette repeatedly  
without allowing the tape to run at all. This  
slackens the tape and can result in damage.  
.... do not open the front tape cover. This exposes the  
tape to fingerprints and dust.  
About moisture condensation . . .  
● You may have observed that pouring a cold liquid  
into a glass will cause drops of water to form on  
the glass’ outer surface. This same phenomenon  
occurs on the head drum of a camcorder when it  
is moved from a cool place to a warm place, after  
heating a cold room, under extremely humid  
conditions or in a place directly subjected to the  
cool air from an air conditioner.  
2. Store cassettes . . .  
.... away from heaters or other heat sources.  
.... out of direct sunlight.  
.... where they won’t be subject to unnecessary shock  
or vibration.  
.... where they won’t be exposed to strong magnetic  
fields (such as those generated by motors,  
transformers or magnets).  
● Moisture on the head drum can cause severe  
damage to the video tape, and can lead to  
internal damage to the camcorder itself.  
.... vertically, in their original cases.  
Main Unit  
1. For safety, DO NOT . . .  
Serious malfunctioning  
.... open the camcorder’s chassis.  
.... disassemble or modify the unit.  
.... short-circuit the terminals of the battery pack.  
Keep it away from metallic objects when not in  
use.  
If malfunctioning occurs, stop using the unit  
immediately and consult your local JVC dealer.  
.... allow inflammables, water or metallic objects to  
enter the unit.  
.... remove the battery pack or disconnect the power  
supply while the power is on.  
.... leave the battery pack attached when the  
camcorder is not in use.  
2. Avoid using the unit . . .  
.... in places subject to excessive humidity or dust.  
.... in places subject to soot or steam such as near a  
cooking stove.  
.... in places subject to excessive shock or vibration.  
.... near a television set.  
.... near appliances generating strong magnetic or  
electric fields (speakers, broadcasting antennas,  
etc.).  
.... in places subject to extremely high (over 40°C or  
104°F) or extremely low (under 0°C or 32°F)  
temperatures.  
3. DO NOT leave the unit . . .  
.... in places of over 50°C (122°F).  
.... in places where humidity is extremely low. (below  
35%) or extremely high (above 80%).  
.... in direct sunlight.  
.... in a closed car in summer.  
.... near a heater.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
EN53  
Camcorder  
General  
Operating temperature: 0°C to 40°C (32°F to 104°F)  
Operating humidity : 35% to 80%  
Format  
Power source  
: VHS NTSC standard  
: DC 6.0 V  
Power consumption : 5.4 W  
Storage temperature : –20°C to 50°C (–4°F to 122°F)  
Video light  
Signal system  
Video recording system  
Luminance  
: 2.9 W  
: NTSC-type  
Weight  
Dimensions  
: Approx. 720 g (1.6 lbs)  
: 91 (W) x 119 (H) x 198 (D) mm  
(3-8/5" x 4-11/16" x 7-13/16")  
(with the viewfinder fully tilted  
downward)  
: FM recording  
Color  
: Converted sub-carrier  
Pickup  
Lens  
: 1/4” format CCD  
direct recording  
Conforms to VHS standard  
: F1.6, f = 3.9 to 62.4 mm, 16:1  
power zoom lens with auto iris  
and macro control, filter  
diameter 40.5 mm  
: Electronic viewfinder  
with 0.55” color LCD  
Cassette  
:
cassette  
Tape speed  
SP  
EP  
: 33.35 mm/sec. (1-5/16 ips)  
: 11.12 mm/sec. (7/16 ips)  
Viewfinder  
Recording time (max.)  
White balance  
adjustment  
SP  
EP  
: 40 minutes  
: 120 minutes (with TC-40)  
: Auto/Manual adjustment  
Connectors  
Video  
Audio  
: 1 Vp-p, 75 Ω unbalanced,  
analog output  
JLIP  
: ø3.5 mm, 4-pole, mini-head  
jack  
(compatible with RC-5325 plug)  
(via Video output connector)  
: –8 dBs, 1 kΩ analog output  
(via Audio output connector)  
Provided Accessories ..................  
pg. 6  
AC Power Adapter/Charger AA-V15U  
੬
Power requirement  
U.S.A. and Canada : AC 120 V`, 60 Hz  
Other countries : AC 110 V to 240 V`, 50/60  
Hz  
Power consumption : 23 W  
Output  
Optional Accessories  
•Battery Packs BN-V12U, BN-V20U, BN-V856U  
•Car Battery Charger BH-V3U  
•Battery Charger BH-VC10U  
Charge  
VTR  
Charging system  
: DC 8.5 V  
: DC 6.3 V  
: Constant current, peak  
detection, timer controlled  
: 140 (W) x 42 (H) x 68 (D) mm  
(5-9/16” x 1-11/16” x 2-11/16”)  
: Approx. 300 g (0.71 lbs)  
, 1.3 A  
, 1.8 A  
•Car Battery Cord AP-V7U  
•Compact VHS-C Cassettes TC-40/30/20  
•Active Carrying Bag CB-V7U  
•Audio/Video Cable  
Dimensions  
Weight  
Some accessories are not available in some areas. Please  
consult your nearest JVC dealer for details on accessories  
and their availability.  
Cassette Adapter C-P7U  
Specifications shown are for SP mode unless otherwise  
indicated. E & O.E. Design and specifications subject to  
change without notice.  
Dimensions  
: 188 (W) x 25 (H) x 104 (D) mm  
(7-7/16” x 1” x 4-1/8”)  
Weight  
Accessory  
: Approx. 240 g (0.53 lbs)  
: “AA (R6)”-size battery x 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ESPAÑOL  
54  
EN  
Marcas  
Alimentación  
A la toma de  
corriente de CA  
Esta cámara de video posee un sistema de alimentación de 3  
vías que le permite seleccionar la fuente de alimentación más  
apropiada.  
Indicador  
CHARGE (carga)  
NOTAS:  
● Sin alimentación no hay ninguna función disponible.  
● Utilice exclusivamente la alimentación indicada.  
● No utilice las unidades de alimentación suministradas con otro  
equipo.  
CARGA DE LA BATERIA  
Interruptor REFRESH  
ALIMENTACION  
1 Conecte el cable de alimentación de CA del cargador a  
Indicador REFRESH  
una toma de corriente.  
REFRESCADO (REFRESH)  
COLOCACION DE LA BATERIA  
El adaptador de CA se caracteriza por la  
función REFRESH que le permite descargar  
totalmente la batería antes de recargarla.  
2 Alinee las marcas y deslice la batería en la dirección de  
la flecha hasta que quede bloqueada en su lugar.  
Efectúe la función REFRESH después de un  
mínimo de 5 cargas.  
Para descargar la batería . . .  
• El indicador CHARGE comienza a destellar para indicar  
que se ha iniciado la carga.  
.... coloque la batería en el adaptador como  
se muestra en la ilustración de arriba.  
Luego presione REFRESH. El indicador  
REFRESH se enciende cuando se inicia la  
descarga y se apaga cuando la descarga ha  
terminado.  
EXTRACCION DE LA BATERIA  
3 Cuando el indicador CHARGE deja de destellar y  
permanece encendido, la carga ha terminado.  
Deslice la batería en el sentido opuesto al de la flecha.  
Batería  
Tiempo de carga  
aprox. 1 h 10 min  
aprox. 1 h 10 min  
aprox. 1 h 50 min  
Tiempo de descarga  
aprox. 3 h 30 min  
aprox. 3 h 30 min  
aprox. 6 h 40 min  
BN-V11U  
BN-V12U  
BN-V20U  
Enganche.  
A
B Empuje.  
USO DE LA BATERIA  
COLOCACION DE LA BATERIA  
1 Enganche el lado extremo de la batería en la cámara de  
video ( ) y empuje la batería hasta que se bloquee en  
el lugar ( ).  
EXTRACCION DE LA BATERIA  
2 Deslice BATTERY RELEASE y extraiga la batería.  
BATTERY RELEASE  
Batería  
Tiempo de grabación aproximado (unidad: min)  
ATENCION:  
Antes de desmontar la fuente de alimentación,  
asegúrese que la alimentación de la cámara  
de video esté desconectada. El no hacerlo  
puede producir un error de funcionamiento  
en la cámara de video.  
BN-V11U  
BN-V12U  
BN-V20U  
70 (40)  
70 (40)  
110 (65)  
(
) : Cuando está encendida el foco.  
INFORMACION:  
Indicador de carga  
El VU-V856KIT es un juego compuesto de la batería  
BN-V856U y del cargador/adaptador de CA AA-V80U. La  
batería BN-V856U suministra aprox. 7 horas de tiempo de  
grabación cuando el foco está desactivado. También lea  
completamente los manuales de instrucción del VU-V856KIT.  
Es imposible cargar la batería BN-V856U utilizando el  
cargador/adaptador de CA suministrado. Use el cargador/  
adaptador de CA AA-V80U opcional.  
Indicador de carga  
Se incorpora un indicador de carga  
sobre la batería para ayudarle a  
recordar si ha sido cargada o no.  
Los dos colores indicadores (rojo y  
negro), le permiten seleccionar la  
carga y la descarga.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GUIA PARA OPERACION RAPIDA  
EN55  
Si la unidad comienza a funcionar mal, deje de usarla inmediatamente y consulte a su concesionario local de JVC.  
INSERCION DEL CASSETTE DE  
VIDEO  
ALIMENTACION  
A
Enganche.  
B Empuje.  
BATTERY RELEASE  
Botón PUSH  
Conmutador EJECT  
Utilización de la batería  
1 Deslice EJECT para abrir el portacassette.  
2 Inserte cassette de video.  
3 Presione PUSH para cerrar el portacassette.  
(Por más detalles, ੬ p. 13.)  
Enganche el lado extremo de la batería en la  
cámara de video ( ) y empuje la batería hasta  
que se bloquee en el lugar ( ).  
(Procedimiento para carga, ੬ p. 8)  
Para extraer la batería  
Deslice BATTERY RELEASE y extraiga la batería.  
REPRODUCCION  
FILMACION  
Botón REW (2  
)
2
1
Anillo de abertura  
del cubreobjetivo  
(LENS COVER)  
2
Colóquelo en  
“AUTO” o “PRO.”.  
Botón PLAY/  
PAUSE (4/6)  
3
1
Botón de inicio/parada de grabación  
3
Botón STOP (5)  
Colóquelo en “PLAY”.  
1 Ajuste el interruptor de alimentación en “PLAY”.  
2 Presione REW (2).  
1 Gire el anillo LENS COVER de abertura/cierre  
para abrir el cubreobjetivo.  
2 Adjuste el interruptor de alimentación en  
“AUTO” o “PRO.”.  
— La cinta se detiene automáticamente al  
comienzo de la misma.  
3 Presione PLAY/PAUSE (4/6).  
— Comienza la reproducción y la imagen  
aparece.  
•Presione STOP (5) para detener la grabación.  
(Por más detalles, ੬ p. 38.)  
— La lámpara de alimentación se encenderá  
y aparecerá una imagen.  
3 Presione el botón inicio/parada de grabación.  
— Comenzará la grabación.  
•Para detener temporariamente la grabación,  
presione nuevamente el botón de inicio/parada  
de grabación. (Por más detalles, ੬ p. 16 y 17.)  
O simplemente reproduzca la cinta en un  
VCR de VHS utilizando el adaptador de  
cassette (VHS Playpak). ੬ p. 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FOR SERVICING (Only in U.S.A.)  
56  
EN  
HOW TO LOCATE YOUR JVC SERVICE CENTER  
TOLL FREE: 1-800-252-5722  
Dear customer:  
In order to receive the most satisfaction from your purchase, read the instruction booklet before  
operating the unit. In the event that repair is necessary, or for the address nearest your location,  
please refer to the factory service center list below or within the Continental United States, call 1-800-  
252-5722 for your authorized servicer. Remember to retain your Bill of Sale for Warranty Service.  
— JVC  
JVC SERVICE & ENGINEERING  
COMPANY OF AMERICA  
DIVISION OF US JVC CORP.  
FACTORY SERVICE CENTER LOCATIONS  
107 Little Falls Road  
Fairfield, NJ 07004-2105  
(973) 808-9279  
1500 Lakes Parkway  
Lawrenceville, GA 30243-5857  
(770) 339-2522  
705 Enterprise Street  
Aurora, IL 60504-8135  
(630) 851-7855  
5665 Corporate Avenue  
Cypress, CA 90630-4727  
(714) 229-8011  
10700 Hammerly Blvd., Suite 110 2969 Mapunapuna Place, Suite 101  
Houston, TX 77043-2310  
(713) 935-9331  
Honolulu, HI 96819-2000  
(808) 833-5828  
230 Eliot Street  
Ashland, MA 01721-2377  
(508) 881-5923  
8192 West State Road 84  
Davie, FL 33324-4611  
(954) 472-1960  
890 Dubuque Avenue  
South San Francisco, CA 94080-1804  
(415) 871-2666  
Sophisticated electronic products may require occasional service. Just as quality is a keyword in the  
engineering and production of the wide array of JVC products, service is the key to maintaining the  
high level performance for which JVC is world famous. The JVC service and engineering organization  
stands behind our products.  
NATIONAL HEADQUARTERS  
JVC SERVICE & ENGINEERING COMPANY OF AMERICA  
DIVISION OF US JVC CORP.  
107 Little Falls Road  
Fairfield, NJ 07004-2105  
If you ship the product...  
Pack your JVC unit in the original carton or one of equivalent size and strength. Enclose, with the unit,  
a letter stating the problem or symptom that exists and also a copy of the receipt or bill of sale you  
received when you purchased your JVC unit. Print your home return address on the outside and the  
inside of the carton. Send to the appropriate JVC Factory Service Center as listed above.  
Don’t service it yourself.  
ACCESSORIES  
To purchase accessories for your JVC product, you  
may contact your local JVC Dealer.  
Or from the 48 Continental United States call toll free:  
1-800-882-2345.  
CAUTION  
To prevent electrical shock, do not open the  
cabinet. No user serviceable parts inside.  
Refer servicing to qualified service personnel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY (Only in U.S.A.)  
EN57  
LIMITED WARRANTY  
CONSUMER VIDEO 1-90  
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO  
THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP  
from the date of original retail purchase for the period as shown below. (“The Warranty Period”)  
PARTS  
LABOR  
1
YR  
90  
DAYS  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF  
COLUMBIA AND IN THE COMMONWEALTH OF PUERTO RICO.  
WHAT WE WILL DO:  
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.  
Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized  
service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All  
products and parts thereof may be brought to a JVC authorized service center on a carry-in basis except for  
Television sets having a screen size 25 inches and above which are covered on an in-home basis.  
WHAT YOU MUST DO FOR WARRANTY SERVICE:  
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC  
authorized service center, please call toll free: (800) 252-5722.  
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with  
a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center,  
the name and location of which will be given to you by the toll-free number.  
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.  
WHAT IS NOT COVERED:  
This limited warranty provided by JVC does not cover:  
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse,  
faulty installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility  
authorized by JVC to render such service, or if affixed to any attachment not provided with the products, or if  
the model or serial number has been altered, tampered with, defaced or removed;  
2. Initial installation and installation and removal for repair;  
3. Operational adjustments covered in the Owner’s Manual, normal maintenance, video and audio head cleaning;  
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;  
5. Signal reception problems and failures due to line power surge;  
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of  
purchase;  
7. Accessories;  
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);from the date  
of purchase);  
There are no other express warranties except as listed above.  
THE DURATION OF ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTY OF  
MERCHANTABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.  
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY  
OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT  
LIMITATION, DAMAGE TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT,  
OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES,  
INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE  
LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.  
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an  
implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific  
legal rights and you may also have other rights which vary from state to state.  
JVC COMPANY OF AMERICA  
DIVISION OF US JVC CORP.  
1700 Valley Road  
Wayne, N.J. 07470  
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR  
DETAILS OF REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT  
WARRANTY INFORMATION PACKAGED WITH EACH REFURBISHED PRODUCT.  
For customer use:  
Enter below the Model No. and Serial No. which is located either on the rear, bottom or side of the cabinet. Retain  
this information for future reference.  
Model No.:  
Serial No:  
Name of dealer:  
Purchase date:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
VICTOR COMPANY OF JAPAN, LIMITED  
1P1ri9n8teMdKinV*JaUpNan*YP  
U
COPYRIGHT© 1998 VICTOR COMPANY OF JAPAN, LTD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Insignia Computer Drive NS PCH5421 User Manual
Intellinet Network Solutions Network Router 502566 User Manual
Jensen Car Stereo System MP6312i User Manual
JVC Music Mixer KM H2500 User Manual
JVC Speaker System CA MXKA3 User Manual
Kenwood Two Way Radio TKR 900 User Manual
King Canada Planer KC 385FX User Manual
KitchenAid Ice Maker KUIC15PLTS1 User Manual
KitchenAid Refrigerator W10608689A User Manual
Kodak Digital Photo Frame CAT 820 1899 User Manual