COMPACT VHS CAMCORDER
CAMARA DE VIDEO VHS COMPACTO
CÂMERA VHS COMPACTA
GR-AX847UM
GR-AX247UM
Compact VHS
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
INSTRUÇÕES
LYT0105-001B
Download from Www.Somanuals.com. All Manuals Search And Download.
2
EN
Dear Customer,
Warning on lithium battery
The battery used in this device may present a
fire or chemical burn hazard if mistreated. Do
not recharge, disassemble, heat above 100°C
or incinerate.
Replace battery with Maxell, Panasonic
(Matsushita Electric), Sanyo or Sony CR2025;
use of another battery may present a risk of fire
or explosion.
Ⅲ Dispose of used battery promptly.
Ⅲ Keep away from children.
Ⅲ Do not disassemble and do not dispose of in
fire.
Thank you for purchasing the JVC Compact
VHS camcorder. Before use, please read the
safety information and precautions contained
in the following pages to ensure safe use of
your new camcorder.
Using This Instruction Manual
•All major sections and subsections are listed in
the Table Of Contents (੬ pg. 7).
•Notes appear after most subsections. Be sure to
read these as well.
•Basic and advanced features/operation are
separated for easier reference.
This camcorder is designed to be used with
NTSC-type colour television signals. It cannot
be used for playback with a television of a
different standard. However, live recording
and viewfinder playback are possible any-
where. Use the BN-V11U/V12U/V18U/V22U/
V25U battery packs and, to recharge them, the
provided multi-voltage AC Power Adapter/
Charger. (An appropriate conversion adapter
may be necessary to accommodate different
designs of AC outlets in different countries.)
It is recommended that you . . .
.... refer to the Index (੬ pgs. 51 – 54) and
familiarize yourself with button locations, etc.
before use.
.... read thoroughly the Safety Precautions that
follow and cautions (੬ pgs. 55, 56). They
contain extremely important information
regarding the safe use of your new camcorder.
SAFETY
NOTES:
● The rating plate (serial number plate) and
safety caution are on the bottom and/or the
back of the main unit.
PRECAUTIONS
● The rating plate (serial number plate) of the
AC Power Adapter/Charger is on its bottom.
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR
MOISTURE.
This unit is produced to comply with Standard
IEC Publ. 65.
CAUTIONS:
Ⅲ To prevent shock, do not open the cabinet.
No user serviceable parts inside. Refer
servicing to qualified personnel.
Ⅲ When you are not using the AC Power
Adapter/Battery charger for a long period of
time, it is recommended that you disconnect
the power cord from AC outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
3
IMPORTANT PRODUCT
SAFETY INSTRUCTIONS
ANTENNA INSTALLATION
INSTRUCTIONS
1. Outdoor Antenna Grounding
Electrical energy can perform many useful func-
tions. But improper use can result in potential
electrical shock or fire hazards. This product has
been engineered and manufactured to assure your
personal safety. In order not to defeat the built-in
safeguards, observe the following basic rules for its
installation, use and servicing.
If an outside antenna or cable system is connected
to the product, be sure the antenna or cable system
is grounded so as to provide some protection
against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/
NFPA 70, provides information with regard to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conduc-
tors, location of antenna discharge unit, connection
to grounding electrodes, and requirements for the
grounding electrode.
ATTENTION:
Follow and obey all warnings and instructions
marked on your product and its operating instruc-
tions. For your safety, please read all the safety and
operating instructions before you operate this
product and keep this manual for future reference.
2. Lightning
For added protection for this product during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product
due to lightning and power-line surges.
INSTALLATION
1. Power Sources
Operate your product only from the type of power
source indicated on the marking label. If you are
not sure of the type of power supply to your home,
consult your product dealer or local power
company. If your product is intended to operate
from battery power, or other sources, refer to the
operating instructions.
3. Power Lines
An outside antenna system should not be located in
the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an
outside antenna system, extreme care should be
taken to keep from touching such power lines or
circuits as contact with them might be fatal.
2. Overloading
Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result
in a risk of fire or electric shock.
3. Power Cord Protection
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
Power supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, convenience recepta-
cles, and the point where they exit from the
product.
ANTENNA
LEAD IN WIRE
GROUND CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION
4. Ventilation
810-20)
Slots and openings in the cabinet are provided for
ventilation. To ensure reliable operation of the
product and to protect it from overheating, these
openings must not be blocked or covered.
•Do not block the openings by placing the product
on a bed, sofa, rug or other similar surface.
•Do not place the product in a built-in installation
such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s
instructions have been adhered to.
ELECTRIC SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC ART 250. PART H)
NEC – NATIONAL ELECTRICAL CODE
5. Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling
only as recommended by the manufacturer.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
EN
USE
SERVICING
1. Servicing
1. Accessories
To avoid personal injury:
If your product is not operating correctly or exhibits
a marked change in performance and you are
unable to restore normal operation by following the
detailed procedure in its operating instructions, do
not attempt to service it yourself as opening or
removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to
qualified service personnel.
•Do not place this product on an unstable cart,
stand, tripod, bracket or table. It may fall, causing
serious injury to a child or adult, and serious
damage to the product.
•Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer or sold
with the product.
•Use a mounting accessory recommended by the
manufacturer and follow the manufacturer’s
instructions for any mounting of the product.
•Do not try to roll a cart with small casters across
thresholds or deep-pile carpets.
2. Damage Requiring Service
Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen
into the product.
2. Product and Cart Combination
A product and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart combina-
tion to overturn.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation.
e. If the product has been dropped or damaged in
any way.
3. Water and Moisture
Do not use this product
near water—for example,
near a bath tub, wash
bowl, kitchen sink or
laundry tub, in a wet
basement, or near a
swimming pool and the
like.
PORTABLE CART WARNING
(Symbol provided by RETAC)
f. When the product exhibits a distinct change in
performance—this indicates a need for service.
3. Replacement Parts
4. Object and Liquid Entry
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or
other hazards.
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result in
a fire or electric shock. Never spill liquid of any
kind on the product.
5. Attachments
4. Safety Check
Do not use attachments not recommended by the
manufacturer of this product as they may cause
hazards.
Upon completion of any service or repairs to this
product, ask the service technician to perform safety
checks to determine that the product is in safe
operating condition.
6. Cleaning
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
7. Heat
The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce
heat.
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK OPERATION GUIDE
EN
5
INSERTING A VIDEO
CASSETTE
SUPPLY POWER
Hook on.
1
EJECT
Push in.
2
1
BATT. RELEASE
3
PUSH
2
Using the battery pack
1 Hook-on the battery pack’s top end to the
camcorder. (Charging procedure, ੬ pg. 8)
2 Push in the battery pack until it locks into
place.
1 Slide EJECT to open the cassette holder.
2 Insert a video cassette.
3 Press PUSH to close the cassette holder.
(For more details, ੬ pg. 13)
To remove the battery pack
Slide BATT. RELEASE and pull out the battery
pack.
SHOOTING
PLAYBACK
PLAY/PAUSE
3
1
LENS COVER
Open/Close
Switch
2
Set to “CAMERA”
3
1
2
Recording Start/Stop Button
STOP
Set to “PLAY” REW
1 Set the Power Switch to “PLAY”.
2 Press REW.
1 Slide the LENS COVER Open/Close Switch
to open the lens cover.
— The tape will automatically stop at the
beginning of the tape.
2 Set the Power Switch to “CAMERA”.
— The power indicator will light and an
image will appear.
3 Press the Recording Start/Stop Button.
— Recording starts.
3 Press PLAY/PAUSE.
— Playback starts and the playback picture
appears.
•To stop playback, press STOP.
(For more details, ੬ pg. 36.)
•To stop recording temporarily, momentarily
press the Recording Start/Stop Button once
again.
Or simply play back the tape on a VHS
VCR using the Cassette Adapter (VHS
Playpak). ੬ pg. 34
(For more details, ੬ pgs. 16, 17)
Download from Www.Somanuals.com. All Manuals Search And Download.
MAJOR FEATURES
6
EN
REMEMBER
Integrated Auto Light
(GR-AX847 only) (੬ pg. 21)
The Logical Choice
5Sec.-Rec (5 sec. Recording)
(੬ pg. 19)
The only compact video
cassettes that can be
22x Optical Hyper Zoom
(੬ pg. 18)
used with your VHS VCR*
Zoom-in
Program AE with Special
Effects (੬ pg. 22)
Zoom-out
Ⅲ Auto Mode Lock
Ⅲ Auto Mode Release
Ⅲ Electronic Fog Filter Ⅲ ND Effect
Ⅲ Sepia Ⅲ Twilight Ⅲ Sports
Ⅲ 1/1000 sec. High Speed Shutter
Ⅲ 1/2000 sec. High Speed Shutter
Program Manager II
(੬ pg. 22 – 33)
Program AE with Special Effects,
Fader, Wide, Super LoLux, Instant
Title, Menu Adjustment (Focus,
Exposure Control and so on.)
PROVIDED ACCESSORIES
•Cassette Adapter
(VHS Playpak) C-P7U
•Battery Pack
•BN-V18U for GR-AX847
•BN-V11U for GR-AX247
•Remote Control
•AC Power Adapter/
Unit RM-V705U
Charger AA-V15U
(GR-AX847 only)
•Lithium Battery CR2025
•x 2 for GR-AX847 (clock operation
and remote control unit)
•x 1 for GR-AX247 (clock operation)
•Shoulder Strap
•DC Cord
Cassettes marked
can be used with this camcorder.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
EN
7
GETTING STARTED
8
Power .............................................................................................. 8
Clock (Lithium) Battery Insertion/Removal.................................................10
Date/Time Setting .............................................................................11
Recording Mode Setting .......................................................................12
Tape Length Setting ............................................................................12
Loading/Unloading A Cassette ...............................................................13
Grip Adjustment ................................................................................14
Viewfinder Adjustment ........................................................................14
Shoulder Strap Attachment....................................................................15
Tripod Mounting ................................................................................15
RECORDING
16
Basic Recording .................................................................................16
Basic Features ..................................................................................18
Advanced Features .............................................................................22
PLAYBACK
34
Using The Cassette Adapter...................................................................34
Basic Connections...............................................................................35
Basic Playback ..................................................................................36
Features .........................................................................................37
TAPE DUBBING
USING REMOTE CONTROL UNIT (GR-AX847 only)
39
40
Random Assemble Editing .....................................................................42
Insert Editing ....................................................................................46
Audio Dubbing ..................................................................................47
USER MAINTENANCE
TROUBLESHOOTING
INDEX
48
49
51
Viewfinder Indications .........................................................................51
Controls..........................................................................................52
Connectors.......................................................................................52
Indicators ........................................................................................52
Other Parts......................................................................................52
Terms .............................................................................................54
CAUTIONS
55
57
57
SPECIFICATIONS
OPTIONAL ACCESSORIES
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
8
EN
Marks
Power
This camcorder’s 3-way power supply system lets you
choose the most appropriate source of power.
To AC outlet
CHG. (charge)
indicator
NOTES:
● No function is available without power supply.
● Use only specified power supply.
● Do not use provided power supply units with other
equipment.
CHARGING THE BATTERY PACK
REFRESH switch
SUPPLY POWER
Connect the charger’s AC power cord to a wall
REFRESH indicator
REFRESH
1
2
outlet.
ATTACH BATTERY PACK
Align the marks and slide the battery pack in the
direction of the arrow until it locks in place.
The AC power adapter features a REFRESH
function that allows you to fully discharge
the battery pack before recharging. Perform
the REFRESH function after no less than 5
chargings.
•The CHG. indicator begins blinking to indicate
charging has started.
To discharge the battery . . .
DETACH BATTERY PACK
..... attach the battery pack to the adapter
as shown in the above illustration.
Then push REFRESH. The REFRESH
indicator lights when discharging
starts, and goes out when discharging
is complete.
When the CHG. indicator stops blinking but stays lit,
charging is finished. Slide the battery pack opposite
the direction of the arrow.
3
BATT. PACK
CHARGE
DISCHARGE
BN-V11U
BN-V12U
BN-V18U
BN-V22U
BN-V25U
approx. 1 hr. 10 min.
approx. 1 hr. 10 min.
approx. 1 hr. 40 min.
approx. 3 hrs. 30 min.
approx. 3 hrs. 30 min.
approx. 5 hrs. 30 min.
approx. 2 hrs. 10 min. approx. 7 hrs.
approx. 2 hrs. 40 min. approx. 10 hrs.
USING THE BATTERY PACK
Hook on.
ATTACH BATTERY PACK
1
Hook its top end to the camcorder and push the
1
2
battery pack in until it locks in place.
DETACH BATTERY PACK
Slide BATT. RELEASE and pull out the battery pack.
Push in.
2
Approximate recording time (unit: min.)
BATT. RELEASE
BATT. PACK
BN-V11U
BN-V12U
BN-V18U
BN-V22U
BN-V25U
GR-AX847
GR-AX247
—
75
75
75
110
150
(40)
ATTENTION:
(65)
(90)
—
Before detaching the power source,
make sure that the camcorder’s power
is turned off. Failure to do so can result
in a camcorder malfunction.
155
200
200 (120)
(
) : when the video light is on. (GR-AX847 only)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
9
CHARGE MARKER
Charge marker
A charge marker is provided on the battery pack to
help you remember whether it has been charged or
not. Two colors are provided (red and black)—you
choose which one means charged and which
means discharged.
•The battery pack BN-V18U does not have a
charge marker.
NOTES:
● The recording time per charge is affected by such factors as the time spent in Record-Standby mode and
the frequency of zooming. It is safer to have spare battery packs.
● Charging times noted on page 8 are for fully discharged battery pack, and discharging times are for fully
charged battery pack.
●
Charging and discharging times vary according to the ambient temperature and the status of the battery pack.
● Remember to set the charge marker after charging a battery pack or after detaching a discharged one from
your camcorder.
● Perform the REFRESH function after no less than 5 chargings.
● While the AC Power Adapter/Charger’s power cord is disconnected from the AC outlet, it is possible to
discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger
does not charge the battery. When disharging is complete, detach the battery from the AC Power Adapter/
Charger to store it.
● High temperatures can damage the battery pack, so use only where good ventilation is available. Don’t
allow it to discharge in container, such as a bag.
● If you stop recharging or discharging part way through, make sure to remove the battery pack before
unplugging the adapter’s AC cord.
● Remove the battery pack from the adapter immediately after discharging.
● To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.
● Make sure you unplug the DC cord before charging or discharging the battery pack.
● The CHG. indicator may not light properly with a brand new battery pack, or with one that’s been stored
for an extended period. In this case, remove and reattach the battery pack and recharge it. The CHG.
indicator should blink during recharging. If not, contact your nearest JVC dealer.
USING A CAR BATTERY
Use the optional Car Battery Cord or Car Battery
Charger/Adapter (connect as shown in the
illustration to the left).
To AC outlet
DC OUT
terminal
To DC
IN jack
NOTES:
AC Power Adapter/
Charger AA-V15U
● When using the car battery, leave the engine
idling.
● The optional Car Battery Charger (BH-V3U) can
also be used to charge the battery pack.
● When using the optional Car Battery Charger or
Car Battery Cord (AP-V7U), refer to the respective
instruction booklet.
DC cord
To car’s
cigarette
lighter socket
Car Battery Cord
AP-V7U (optional)
USING AC POWER
Use the AC Power Adapter (connect as shown in
the illustration to the left).
NOTE:
The supplied AC Power Adapter/Charger features
automatic voltage selection in the AC range from
110 V to 240 V.
Car Battery
Charger/Adapter
BH-V3U (optional)
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED (cont.)
10
EN
Clock (Lithium) Battery Insertion/Removal
A
This battery is necessary for clock operation and to
perform date/time settings.
SWITCH OFF POWER
Switch off the unit’s power and remove the power
1
2
3
supply unit.
OPEN COVER
Open the clock battery compartment cover while
pressing the release tab.
REMOVE BATTERY (when replacing)
Insert a pointed, non-metallic object between the
A
battery and the compartment ( ) and pull the
battery out.
INSERT BATTERY
Ensure that the plus (+) side is up and insert a
CR2025 lithium battery and push it in.
4
5
CLOSE COVER
Close the compartment cover until it clicks in place.
NOTE:
See “SAFETY PRECAUTIONS” (੬ pg. 2) for information
on safe handling of lithium batteries.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
11
Date/Time Setting
ACCESS MENU SCREEN
First set the Power Switch to “CAMERA”. Turn the
Select Dial to any position except AUTO LOCK,
then press the MENU Jog Dial.
1
2
SELECT FUNCTION
Rotate the MENU Jog Dial to move the highlight bar
to “DATE/TIME”, then press it. The DATE/TIME
Setting Menu appears.
Select Dial
•If you decide you want to return the date and time
to the previous settings, rotate the MENU Jog Dial
to move highlight bar to “EXIT” and press it, then
go to step 6.
MENU
Jog Dial
•If you want to set only the time without changing
the date, go to step 4.
Viewfinder
MENU
SET DATE
Rotate the MENU Jog Dial to move the highlight bar
to the item you want to set and then press it. When
the setting begins blinking, rotate the MENU Jog
Dial until the correct setting appears and then press
it. The setting stops blinking.
4
MENU END
3
4
FOCUS
AUTO
EXPOSURE
DATE TIME
AUTO
JAN 1.98
TELE MACRO OFF
TAPE LENGTH T30
M. W. B.
AUTO
ZOOM SPEED FAST
•Repeat this procedure until you’re satisfied with
the Date settings (“YEAR”, “MONTH” and “DAY”).
4NEXT
Menu Screen
SET TIME
Rotate the MENU Jog Dial to move the highlight bar
to “TIME” and then press it. When the hour setting
begins blinking, rotate the MENU Jog Dial until the
correct setting appears and then press it. When the
hour setting stops blinking and the minute setting
begins blinking, rotate the MENU Jog Dial until the
correct setting appears and then press it. The minute
setting stops blinking.
DATE TIME
YEAR
1998
JAN
MONTH
DAY
1
TIME
PM 12:00
12-hour
indication with
AM or PM
EXIT
DATE/TIME Setting Menu
START CLOCK OPERATION
When none of these settings (YEAR, MONTH, DAY,
TIME) blinks, rotate the MENU Jog Dial to move the
highlight bar to “EXIT”, and press it. The Menu
Screen appears and “MENU END” is highlighted.
5
6
MENU
4
MENU END
FOCUS
AUTO
EXPOSURE
DATE TIME
AUTO
CLOSE MENU
DEC 25.98
TELE MACRO OFF
TAPE LENGTH T30
Press the MENU Jog Dial.
M. W. B.
AUTO
ZOOM SPEED FAST
4NEXT
NOTE:
To display the date and time in the viewfinder and on a
connected TV, see “Date/Time Insert” (੬ pg. 20).
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED (cont.)
12
EN
Recording Mode Setting
SP/EP Recording
Mode Button
Set depending on your preference.
SET RECORDING MODE
First set the Power Switch to “CAMERA”. Press SP/EP
1
Button for more than 1 second. “SP” (Standard Play)
provides higher picture and sound quality and is
better for dubbing, while “EP” (Extended Play) is
more economical, providing three times as the
recording time.
NOTE:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
Select Dial
MENU Jog Dial
Viewfinder
Tape Length Setting
T40
Tape length
indicator
SP
Set the tape length according to the length of the tape
used.
Recording
mode
indicator
ACCESS MENU SCREEN
First set the Power Switch to “CAMERA”. Turn the
1
2
3
Select Dial to any position except AUTO LOCK,
then press the MENU Jog Dial.
SELECT FUNCTION
MENU
Rotate the MENU Jog Dial to move the highlight bar
to “TAPE LENGTH”, then press it. The TAPE
LENGTH Setting Menu appears.
4
MENU END
FOCUS
AUTO
EXPOSURE
DATE TIME
AUTO
DEC 25.98
TELE MACRO OFF
TAPE LENGTH T40
SET TAPE LENGTH
M. W. B.
AUTO
Rotate the MENU Jog Dial to move the highlight bar
to the correct setting. T20=20 minutes of recording
time, T30=30 minutes, and T40=40 minutes (in SP).
ZOOM SPEED FAST
4NEXT
Menu Screen
•If you decide you want to return the tape length to
the previous setting, rotate the MENU Jog Dial to
move the highlight bar to “EXIT”.
TAPE LENGTH
T20
T30
T40
CLOSE MENU
Press the MENU Jog Dial. The Menu Screen
reappears and the highlight bar is on “MENU END”.
Then press the MENU Jog Dial again to close the
Menu Screen.
4
EXIT
TAPE LENGTH Setting Menu
NOTES:
● The displayed tape remaining time (੬ pg. 17) is
correct only if the correct tape length has been
selected.
● Once you have set the tape length, it remains un-
changed even if the Select Dial is returned to AUTO
LOCK.
MENU
4
MENU END
FOCUS
AUTO
EXPOSURE
DATE TIME
TELE MACRO OFF
TAPE LENGTH T20
AUTO
DEC 25.98
M. W. B.
AUTO
ZOOM SPEED FAST
4NEXT
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
13
Loading/Unloading A Cassette
OPEN CASSETTE HOLDER
Slide EJECT until the holder opens. Do not use force
1
2
3
to open.
1
INSERT/REMOVE CASSETTE
Make sure the label is facing outward.
3
2
CLOSE CASSETTE HOLDER
Press PUSH and make sure the holder is closed and
locked.
NOTES:
● A cassette holder can’t be opened unless a power
supply is attached.
● Make sure that the tape is not slack when loading the
cassette. If there is any slack, turn the gear on the
cassette in the direction of the arrow to take up the
slack.
Turn to take
up slack.
Erase Protection
Gear
● Make sure the Erase Protection tab is in the position
that allows recording. If not, slide the tab. Some
cassettes have removable tabs. If the tab has been
removed, cover the hole with adhesive tape.
● The cassette holder can’t be opened while the
camcorder is in the record mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED (cont.)
Grip Adjustment
14
EN
Power Zoom Button
EXPAND LOOP
Separate the Velcro strip.
1
2
3
INSERT HAND
Pass your right hand through the loop and grasp the
grip.
ADJUST STRAP LENGTH
Adjust so your thumb and fingers can easily operate
the Recording Start/Stop Button and Power Zoom
Button. Refasten the Velcro strip.
Recording Start/Stop Button
Viewfinder Adjustment
POSITION VIEWFINDER
3
Adjust the viewfinder manually for best viewability
1
2
3
(see illustration at left).
SELECT MODE
1
Set the Power Switch to CAMERA.
2
ADJUST DIOPTER
Turn the Diopter Adjustment Control until the
indications in the viewfinder are clearly focused.
Set POWER to “CAMERA”.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
15
Shoulder Strap Attachment
ATTACH STRAP
Following the illustration at left, thread the strap
through the top of the eyelet 1, then fold it back
and thread it through the buckle 2. Repeat the
procedure to attach the other end of the strap to the
other eyelet 3, making sure the strap isn’t twisted.
1
2
2
1
1
3
ADJUST LENGTH
Adjust as shown in the illustration at left 1.
Tripod Mounting
ALIGN AND TIGHTEN
Align the screw and camera direction stud on the
tripod with the camera’s mounting socket and stud
hole. Then tighten the screw.
1
CAUTION:
When using a tripod, be sure to open and extend
its legs fully to stabilize the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Basic Recording
16
EN
NOTE:
LENS COVER Switch
You should already have performed the procedures listed
below. If not, do so before continuing.
● Power (੬ pg. 8)
● Recording Mode/Tape Length Setting (੬ pg. 12)
● Grip Adjustment (੬ pg. 14)
LOAD A CASSETTE
Power
indicator
Slide EJECT to open the cassette holder, then insert
1
2
the cassette with the label facing out. Press PUSH to
ensure the holder is closed and locked.
ENTER RECORD-STANDBY MODE
Slide the LENS COVER Open/Close Switch to open
the lens cover, then set the Power Switch to
CAMERA.
Power Switch
Start/Stop Button
•The power indicator lights and the camcorder
enters the Record-Standby mode.
•The scene you’re aimed at appears on the
viewfinder screen, with the word “PAUSE”
superimposed upon it.
START SHOOTING
Press the Recording Start/Stop Button.
3
•“REC ” appears in the viewfinder while recording is
in progress.
Tally lamp (GR-AX847 only)
(lights while recording is in progress)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
17
Tape remaining time indicator
STOP RECORDING
25MIN
MIN
Press the Recording Start/Stop Button again to stop
recording.
(Now calculating)
4
•The camcorder re-enters the Record-Standby
mode.
120MIN
119MIN
NOTES:
● A cassette holder can’t be opened unless a power supply
is attached.
● There may be a delay after you slide EJECT until the
holder opens. Do not use force.
● The displayed remaining time is approximate.
● The time required to calculate the remaining tape
length, and the accuracy of the calculation, may vary
according to the type of tape used.
3MIN
2MIN
(Blinking)
1MIN
● The tape remaining time indicator is correct only if the
correct tape length has been selected (੬ pg. 12).
● “TAPE END” appears when the tape reaches its end,
and the power goes off automatically if left in this
condition for 5 minutes. “TAPE END” also appears
when a cassette whose tape is already at its end is
loaded.
(Blinking)
0MIN
(Blinking)
Start/Stop Button
● If the Record-Standby mode continues for 5 minutes
without performing Zoom or any other operations, the
camcorder’s power shuts off automatically. Set the
Power Switch to “POWER OFF”, and then back to
“CAMERA” to turn the camcorder on again.
● If the Recording Start/Stop Button is pressed after the
Record-Standby mode has continued for over
5 minutes, recording may not start immediately.
● If you’re recording on a cassette from the middle (such
as when a tape is removed and re-inserted during
recording), use the Retake function (੬ pg. 19) to find
the end of the last recording so you don’t erase any of
it.
● The LENS COVER warning blinks for about 5 seconds
when the camcorder is turned on when the cover is
closed.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Basic Features
18
EN
FEATURE:
Zooming
Zoom-in
PURPOSE:
To produce the zoom in/out effect, or
an instantaneous change in image
magnification.
OPERATION:
Zoom In
Press the “T” of the Power Zoom
Button.
Zoom-out
Zoom Out
Press “W” of the Power Zoom
Button.
Zoom indicator bar
Ⅲ Zooming speed is available. A total
of 4 zoom speeds are available. 2
speeds can be selected depending
on how hard the Power Zoom
Button is pressed (press the button
fully for regular-speed, press it
lightly for slow-speed), while 2
speed levels (FAST/SLOW) can be
selected in the ZOOM SPEED
Menu depending on the overall
speed you prefer.
Power Zoom button
The combinations of zoom speeds
are shown in the chart below.
Changing the ZOOM SPEED in the
Menu
1) Set the Select Dial to any position
except AUTO LOCK and press the
MENU Jog Dial. The Menu Screen
appears.
2) Rotate the MENU Jog Dial to move
the highlight bar to “ZOOM
SPEED”, then press it. The ZOOM
SPEED Setting Menu appears.
3) Rotate the MENU Jog Dial to move
the highlight bar to the desired
speed and press it twice. The
Menu Screen disappears and
setting is completed.
Select Dial
MENU Jog Dial
Viewfinder
MENU
4
MENU END
FOCUS
AUTO
AUTO
JAN 1.98
EXPOSURE
DATE TIME
TELE MACRO OFF
TAPE LENGTH T30
M. W. B.
AUTO
ZOOM SPEED FAST
4NEXT
Menu Screen
NOTE:
Focusing may become unstable
during Zooming. In this case, set the
zoom while in Record–Standby, lock
the focus by using the manual focus
(੬ pg. 29), then zoom in or out in
Record mode.
ZOOM SPEED
FAST
SLOW
EXIT
Zooming Speed ( 1– 4 in order of speed)
ZOOM SPEED Setting Menu
“ZOOM SPEED”
in the Menu
Screen
Pressing the Power Zoom Button
fully
lightly
3
FAST
1 (fastest)
2
SLOW
4 (slowest)
: when the Select Dial is set to AUTO LOCK.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
19
FEATURE:
PURPOSE:
Quick Review
To check the end of the last
recording.
OPERATION:
1) Press “ ” and release quickly
during the Record-Standby mode.
Ⅲ Tape is rewound for about 2
seconds and played back
automatically, then pauses in
Record-Standby mode for the
next shot.
5SEC. REC
RETAKE (R/F)
NOTE:
Distortion may occur at start of
playback. This is normal.
FEATURE:
Retake
PURPOSE:
OPERATION:
To re-record certain segments.
1) Make sure the camcorder is in the
Record-Standby mode.
2) Press either RETAKE button to
reach the start point for new
recording. Pressing “F” forwards
the tape and pressing “R” reverses
it.
3) Press Recording Start/Stop Button
to start recording.
NOTE:
Noise may appear during Retake.
This is normal.
Viewfinder
FEATURE:
PURPOSE:
5Sec. Rec (5-sec. Recording)
To record a scene for 5 seconds,
providing quick scene transitions like
those seen in TV programmes.
PAUSE
5S
OPERATION:
1) During Record-Standby, press
5SEC. REC. “
5S” appears and
5Sec. Rec is reserved.
2) Press Recording Start/Stop Button.
Recording starts, and after
5Sec. Rec mode indicator
5-second recording is finished, the
camcorder reenters the Record-
Standby mode automatically.
Ⅲ To cancel the 5Sec. Rec.
function, press 5SEC. REC again
so that “
5S” disappears.
NOTE:
The Fader (੬ pg. 24) cannot be
activated by pressing 5SEC. REC.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Basic Features (cont.)
20
EN
DATE/TIME
FEATURE:
PURPOSE:
Date/Time Insert
To display the date and time in the
viewfinder or on a connected color
monitor, as well as to record them
manually or automatically.
OPERATION:
1) Turn the Select Dial to any
position except AUTO LOCK.
2) Choose a display mode by
pressing DATE/TIME repeatedly
while in Record-Standby to cycle
through the modes as shown in the
illustration at left.
Display
Select Dial
Ⅲ You should have already
performed the Date/Time Setting
procedure (੬ pg. 11). If you
haven’t, do so first.
NOTES:
DISPLAY
● The selected display can be
recorded.
Date display
● If you don’t want to record the
display, select the Date-off mode
before shooting.
Time display
● If you want to delete the display
during shooting, press DATE/TIME.
● To recall the display, engage the
Record-Standby mode and press
DATE/TIME repeatedly until the
desired display appears.
Date/Time display
Auto Date Record mode
Date-off mode (No display)
AUTO DATE RECORD
● Your camcorder automatically
records the date for about 5
seconds after recording is initiated
in the following situations:
• After changing the date.
Date display
Auto Date Record mode
• After loading a cassette.
DEC 25.98
AUTO DATE
• After Auto Date Record mode is
selected by pressing DATE/TIME.
In this mode, the date is replaced
after 5 seconds with “AUTO DATE”
but this is not recorded.
Auto date record mode
Time display
● Setting the Select Dial to AUTO
LOCK always engages the Auto
Date Record mode, and disables
all other modes.
DEC 25.98
PM10:50:00
Auto date record
executed
Date/Time display
DEC 25.98 PM10:50:00
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
21
FEATURE:
PURPOSE:
Video Light (GR-AX847 only)
To brighten the scene when natural
lighting is too dim.
OPERATION:
1) Set the LIGHT OFF/AUTO/ON
Switch as required:
ON
: Always keeps the light on
as long as the camcorder
is turned on.
AUTO : Automatically turns on
the light when the
camcorder senses
insufficient lighting on the
subject.
OFF : Turns off the light.
LIGHT OFF/AUTO/ON
Ⅲ The video light can only be used
with the camcorder’s power on.
Ⅲ It is recommended to set the
white balance (੬ pg. 31) to
HALOGEN mode ( ) when you
use the video light.
Ⅲ When not using the video light,
turn it off to save battery power.
NOTES:
● Even if the battery indicator (
)
does not blink if the battery pack’s
charge is low, the camcorder may
turn off automatically when you
turn on the video light, or when
you start recording with the video
light turned on.
DANGER
Ⅲ The video light can become extremely
hot. Do not touch it either while in
operation or soon after turning it off,
otherwise serious injury may result.
Ⅲ Do not place the camcorder into the
carrying case immediately after using
the video light, since it remains
extremely hot for some time.
Ⅲ When operating, keep a distance of
about 30 cm. (1 ft.) between the video
light and people or objects.
Ⅲ Do not use near flammable or explosive
materials.
● When the LIGHT OFF/AUTO/ON
Switch is set to “AUTO”:
• Depending on the lighting
conditions, the video light may
keep turning on and off. In this
case, manually switch the light
on or off using the LIGHT OFF/
AUTO/ON switch.
• While the Sports or High-Speed
Shutter mode (੬ pg. 23) is
engaged, the light is likely to stay
on.
Ⅲ It is recommended that you consult your
nearest JVC dealer for replacing the
video light.
• While the Twilight mode
(੬ pg. 23) is engaged, the light
will not activate.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Advanced Features
22
EN
1 second later, the mode is activated.
Program AE With Special Effects
After 1 sec.
All you have to do to access any of the variety of
shooting effects is to turn the Select Dial.
SEPIA
SELECT MODE
Turn the Select Dial until the symbol of the function
1
you want is aligned with the mark.
•The selected mode’s name and its indication are
displayed for approx. 1 second. Then the name
disappears, and only the indication remains. The
mode is activated.
Viewfinder
•When Auto Mode Lock or Auto Mode Release
mode is selected, only the mode’s name is
displayed. Then the name disappears and the
mode is activated.
NOTES:
● Only one effect can be engaged at a time.
● The screen becomes slightly reddish when the Fader
(੬ pg. 24) is used in the Sepia mode.
● The screen becomes slightly dark in the High Speed
Shutter mode. Use in well-lit situations.
● In the High Speed Shutter or Sports modes, picture
color may be adversely affected if subject is lit by
alternating discharge-type light sources such as
flourescent or mercury-vapor lights.
Mark
C
U
EFFECT
WIDE
TITLE
SUPER
LOLUX
Select Dial
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
23
Dial
symbol
Viewfinder
indication
Dial
symbol
Viewfinder
indication
Mode
Mode
LOCK
AUTO LOCK
Auto Mode Lock
TWILIGHT
Twilight
Auto Mode Lock
Twilight
Locks the camcorder in Full Auto mode, preventing
incorrect operation due to accidental button
pressing during shooting.
Dusk, twilight scenery, fireworks, etc., look more
natural and dramatic. The following happens when
Twilight mode is selected:
•In this mode the following controls are disabled;
DATE/TIME display select, and the Menu Jog Dial.
•Auto gain control is turned off.
•White Balance is set to “ ” (FINE day mode), but
can also be manually changed to another mode
(੬ pg. 31).
RELEASE AUTO RELEASE Auto Mode Release
•Auto Focus becomes available only in the range of
10 m (33 ft.) to infinity. To focus when the subject-
to-camera distance is less than 10 m (33 ft.), use
manual focusing (੬ pg. 29).
Auto Mode Release
Re-enables the controls that were disabled by Auto
Mode Lock.
SPORTS
Sports
Electronic
Fog Filter
FG
FG : FOG
Sports
Electronic Fog Filter
High shutter speed clearly captures fast-moving
action.
Makes the picture look misty white, as when an
external fog filter is attached to the lens. Softens the
image and gives it a “fantasy” look.
1/1000 sec.
1/1000
1S 1/1000
High Speed Shutter
ND
ND:ND EFFECT
ND Effect
1/2000 sec.
1/2000
2S 1/2000
High Speed Shutter
ND Effect
A black mist darkens the picture, as when an ND
filter is used. Helps to counter the effects of glare on
the subject.
High-Speed Shutter (1/1000s., 1/2000s.)
Captures faster action than Sports mode.
SEPIA
Sepia
Sepia
The scene being shot is recorded in sepia-tinted
(reddish-brown) monochrome, giving the effect of
an older movie. Use together with Wide (੬ pg. 24)
for the authentic look of a classic Hollywood
movie.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Advanced Features (cont.)
24
EN
Fade-in
Fader
This feature allows smooth fade-in and fade-out to black
blank screen. Fade-in works at recording start, and fade-
out works at recording end or when you enter Record-
Standby mode.
ENGAGE FADE-STANDBY MODE
Press EFFECT to engage the Fade-Standby mode.
1
Fade-out
Viewfinder
4EFFECT
BK
After 2 sec.
•“
FADER” is displayed for approx. 2 seconds.
FADER
BK
Then “BLACK FADER” disappears, and only “
remains.
”
START OR END RECORDING
Press Recording Start/Stop Button to activate fade-in
or fade-out.
2
3
TO CANCEL FADE-STANDBY
MODE
BK
While “ ” is displayed, press EFFECT.
•“OFF” is displayed for approx. 2 seconds and the
fade-standby mode is canceled.
NOTES:
● Pressing and holding the Recording Start/Stop Button
allows you to record a black blank screen.
● The screen becomes slightly reddish when the Fader is
used with Sepia (੬ pg. 23).
EFFECT
● With the Electronic fog filter mode (੬ pg. 23)
engaged, the image fades in/out to a white screen.
WIDE
Recording
Start/Stop
Button
Wide
This feature allows you to record black bars at the top
and bottom of the screen to produce a cinema-like
“wide-screen” effect.
Viewfinder
ENGAGE WIDE MODE
Press WIDE.
1
•To restore normal screen, press WIDE again.
Wide mode
NOTE (for Fader, Wide, Super LoLux, and Instant Titles) :
When the Select Dial is turned to AUTO LOCK, the above functions will be set to the Factory settings
(Fade-standby : “OFF”, Wide mode : off, Super LoLux : “MAX”, Instant Title : off). Then when the Select
Dial is returned to any position except AUTO LOCK, the above functions return to the settings you
selected before turning it to AUTO LOCK. However, if the function is switched during AUTO LOCK, the
selected mode will be set and will remain unchanged even when the Select Dial is turned to any
position except AUTO LOCK.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
25
Viewfinder
Super LoLux(Gain Up)
4S.LX
Bright, natural recordings can be taken even in areas with
low or poor lighting.
After 2 sec.
MAX
SELECT SUPER LOLUX MODE
Press SUPER LOLUX repeatedly to cycle through the
modes as shown at left. Once the desired mode
appears, it is engaged.
1
MAX
NORM
OFF
•The mode’s name is displayed for approx. 2
seconds, then disappears.
MAX : To record a subject in a dark lit
environment. When it is more convenient
to shoot the subject with a brighter image
even if the picture becomes slightly
coarse.
NORM : To record a subject in a dimly lit
environment. When it is more convenient
to shoot with a less coarse picture
although the subject becomes slightly
dark. This setting is suitable for measuring
sensitivity conforming to EIA-639 (EIA*
Standard for Low Light Sensitivity
Measurement).
*EIA : Electronic Industries Association
: Allows you to shoot dark scenes with no
picture brightness adjustment.
TITLE
SUPER LOLUX
OFF
Viewfinder
Instant Titles
The camcorder has eight preset titles in memory. You can
superimpose one of them above a previously stored title
as shown in the illustration to the left.
Instant Titles can be displayed not only in English but also
in French, Spanish and Portuguese. Change the setting in
Title display
TITLE LANG. in the Menu screen. (
੬
pg. 26, 27).
HAPPY BIRTHDAY
OUR VACATION
No display
SELECT PRESET TITLE
Press TITLE repeatedly to cycle through the preset
1
titles until the desired title is displayed.
MERRY CHRISTMAS
A SPECIAL DAY
HAPPY HOLIDAYS
OUR NEW BABY
WEDDING DAY
CONGRATULATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Advanced Features (cont.)
26
EN
Using Menu For Detailed Adjustment
This camcorder is equipped with an easy-to-use,
on-screen menu system that simplifies many of the more
detailed camcorder settings.
ACCESS MENU SCREEN
Turn the Select Dial to any position except AUTO
LOCK, then press the MENU Jog Dial. The Menu
Screen appears.
1
2
Select Dial
MENU Jog Dial
SELECT FUNCTION
Viewfinder
Rotate the MENU Jog Dial to place the highlight bar
on the desired function.
MENU
4
MENU END
FOCUS
AUTO
•When the highlight bar reaches the bottom of
Menu Screen 1, Menu Screen 2 is automatically
displayed. When the highlight bar reaches the top
of Menu Screen 2, Menu Screen 1 is automatically
displayed.
EXPOSURE
DATE TIME
TELE MACRO
AUTO
DEC 25.98
OFF
TAPE LENGTH T30
M. W. B.
AUTO
ZOOM SPEED FAST
4NEXT
•If the setting you want can’t be found in the Menu
Screen, place the highlight bar on “MENU END”,
then go to step 5.
Menu Screen 1
MAKE SETTING
4BACK
REC TIME
INT. TIME
OFF
OFF
Press the MENU Jog Dial. The setting menu of the
selected function appears. The setting procedure
depends on the function you select.
3
GR-AX847 only
TALLY LAMP ON
TITLE LANG.
JLIP ID NO.
ENGLISH
07
If you select “FOCUS”, “EXPOSURE”, or
“DATE/ TIME” . . .
DEMO MODE OFF
... see respective pages (FOCUS: ੬ pg. 28, 29,
EXPOSURE: ੬ pg. 30, DATE/TIME: ੬ pg. 11).
4
MENU END
Menu Screen 2
If you select “JLIP ID NO.” . . .
... press the MENU Jog Dial so that the number
blinks, then rotate it until the desired number
appears, and press it. Then rotate the MENU Jog
Dial to move the highlight bar to “EXIT”.
TITLE LANG.
ENGLISH
FRENCH
SPANISH
PORTUGUESE
If you select any other functions . . .
... rotate the MENU Jog Dial to move the highlight
bar to the desired setting.
•If you decide you want to return to the
vious setting, rotate the MENU Jog Dial to
move the highlight bar to “EXIT”.
pre-
EXIT
Setting Menu
(ex. TITLE LANG.)
END SETTING
Press the MENU Jog Dial. The Menu Screen
BACK
4
4
5
reappears and the highlight bar is on “MENU END”.
REC TIME
OFF
OFF
INT. TIME
GR-AX847 only
TALLY LAMP ON
CLOSE MENU
TITLE LANG.
JLIP ID NO.
FRENCH
07
Press the MENU Jog Dial. The normal screen
reappears.
DEMO MODE OFF
4MENU END
NOTES:
● The menu function except “FOCUS” and “EXPOSURE” are not
available while in the Record mode.
Normal Screen
● For GR-AX247: The tally lamp is not built-in. “TALLY LED” in
the Menu Screen is always set to “OFF” and cannot be set to
“ON”.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
27
Menu Screen Explanations
FOCUS
Adjusts focus automatically.
AUTO
MANU
AUTO
MANU
Allows you to adjust focus manually (੬ pg. 28, 29).
Adjusts exposure automatically.
EXPOSURE
Allows you to adjust exposure manually (੬ pg. 30).
DATE/TIME
Allows you to set the current date and time (੬ pg. 11).
TELE MACRO
Usually the distance to a subject where the lens is in focus
OFF
ON
depends on the zoom magnification. Unless there is a distance
more than 1m (3.3 ft.) to the subject, the lens is out of focus at
the maximum telephoto setting. When set to “ON”, you can
shoot a subject as large as possible at a distance of approx.
60 cm (2 ft.).
•
Depending on the zoom position, the lens may go out of focus.
TAPE LENGTH
M.W.B.
Allows you to set the tape length depending on the tape used (੬ pg. 12).
This camcorder’s Automatic Color Temperature system senses
the color temperature of the ambient lighting for automatic
white balance adjustment. However, precise color adjustment is
not possible under the following conditions:
AUTO
: FINE
: CLOUD
•When an object is in various shades of the same color.
: HALOGEN
•
When a predominantly red or brown object is being shot outdoors.
In these cases, use the camcorder’s built-in preset filters for
white balance adjustment (੬ pg. 31).
MWB
ZOOM SPEED
Allows you to set the zooming speed (੬ pg. 18).
FAST
SLOW
REC TIME
INT. TIME
This feature allows you to set the parameters for Animation and Time-Lapse
recording (੬ pg. 33).
This feature allows you to set the parameters for Self-Timer (੬ pg. 32) and Time-
Lapse recording (੬ pg. 33).
TALLY LAMP
The tally lamp comes on to signal the start of recording.
(available only for GR-AX847)
ON
OFF
The tally lamp remains off at all times.
(GR-AX247: always set to this mode.)
TITLE LANG.
JLIP ID NO.
Allows you to select the language (ENGLISH, FRENCH, SPANISH or PORTUGUESE)
of Instant Titles (੬ pg. 25).
This number is necessary when connecting the camcorder to a device such as a
computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory
setting is 07.
DEMO MODE
Automatic demonstration will not take place.
OFF
ON
Demonstrates certain functions such as the Fader, Instant Titles
etc. When “DEMO MODE” is set to “ON” and the Menu Screen
is closed, demonstration starts.
NOTES:
● When a tape whose Erase Protection tab is in the position that allows
recording is loaded in the camcorder, demonstration is not available.
● By turning off the camcorder or inserting a tape whose Erase Protection
tab is in the position that allows recording into it, “DEMO MODE” is
set to “OFF” automatically.
● During demonstration, all functions except zoom are disabled.
= Factory setting and when the Select Dial is set to AUTO LOCK
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Advanced Features (cont.)
28
EN
Focusing
Auto Focus
Focus detection zone
The camcorder’s Full Range AF system offers continuous
shooting ability from close-up to infinity. However,
correct focus may not be obtainable in the situations
listed below (in these cases use manual focusing):
•When two subjects overlap in the same scene.
•When illumination is low.*
•When the subject has no contrast (difference in
brightness and darkness), such as a flat, one-color wall,
or a clear, blue sky.*
•When a dark object is barely visible.*
•When the scene contains minute patterns or identical
patterns that are regularly repeated.
•When the scene is affected by sunbeams or light
reflecting off the surface of a body of water.
•When shooting a scene with a high-contrast
background.
* The low-contrast warning “
” appears.
NOTES:
● If the lens is smeared or blurred, accurate focusing is
not possible. Keep the lens clean, wiping with a piece
of soft cloth if it gets dirty. When condensation occurs,
wipe with a soft cloth or wait for it to dry naturally.
● When shooting a subject close to the lens, zoom-out
first (੬ pg. 18). If zoomed-in in the auto focus mode,
the camcorder could automatically zoom out depend-
ing on the distance between the camcorder and the
subject. When Tele Macro (੬ pg. 27) is activated, the
camcorder will not zoom out automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
29
Manual Focus
NOTE:
You should already have made the necessary viewfinder
adjustments (੬ pg. 14). If you haven’t, do so before
continuing.
ACCESS MENU SCREEN
Turn the Select Dial to any position except AUTO
1
2
LOCK, then press the MENU Jog Dial. The Menu
Screen appears, and the highlight bar is placed on
“FOCUS”.
Select Dial
MENU Jog Dial
Viewfinder
MENU
ACCESS FOCUS MENU SCREEN
Press the MENU Jog Dial.
4
MENU END
FOCUS
AUTO
EXPOSURE
DATE TIME
AUTO
DEC 25.98
TELE MACRO OFF
TAPE LENGTH T30
ACCESS MANUAL FOCUS
No indication
during
recording
M. W. B.
AUTO
Rotate the MENU Jog Dial to move the highlight bar
ZOOM SPEED FAST
4NEXT
3 to “MANU”, then press it. “ ” and “
” appear. The
focus is locked at this point.
Menu Screen
ADJUST FOCUS
FOCUS
To farther subject . . .
4 Rotate the MENU Jog Dial upward. “
blinks.
AUTO
MANU
” appears and
Go to step 5.
To nearer subject . . .
Rotate the MENU Jog Dial downward. “ ” appears
No indication
during
recording
EXIT
and blinks.
Focus Menu Screen
Go to step 5.
END ADJUSTMENT OF FOCUS
Press the MENU Jog Dial. The Menu Screen
reappears and the highlight bar is placed on “MENU
END”.
5
6
CLOSE MENU
Press the MENU Jog Dial. The Menu Screen
disppears and “
is locked.
” reappears to indicate the focus
Manual Focus Screen
NOTES:
● To return to Auto Focus, select “AUTO” in step 3.
● To re-adjust Manual Focus, repeat the procedure from
step 1.
● Be sure to focus the lens in the maximum telephoto
position when you use the Manual Focus mode. If you
focus in on a certain subject in the wide-angle position,
sharply focused images cannot be obtained when
zoomed up because the depth-of-field is reduced at
longer focal lengths.
● When the focus level cannot be adjusted any farther or
closer, “ ” or “ ” will blink.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Advanced Features (cont.)
30
EN
Exposure Control
This feature automatically adjusts the iris for the best
available picture quality, but you can override and make
the adjustment manually.
ACCESS MENU SCREEN
Turn the Select Dial to any position except AUTO
LOCK, then press the MENU Jog Dial. The Menu
Screen appears.
1
Select Dial
MENU Jog Dial
ACCESS EXPOSURE MENU
SCREEN
Viewfinder
Rotate the MENU Jog Dial to move the highlight bar
to “EXPOSURE” and press it.
MENU
2
3
4
MENU END
FOCUS
AUTO
EXPOSURE
DATE TIME
AUTO
ACCESS MANUAL EXPOSURE
DEC 25.98
TELE MACRO OFF
TAPE LENGTH T30
Rotate the MENU Jog Dial to move the highlight bar
to “MANU”, then press it. “00” (exposure control
level counter) appears.
No indication
during
recording
M. W. B.
AUTO
ZOOM SPEED FAST
4
NEXT
Menu Screen
ADJUST EXPOSURE
To brighten the image . . .
4 Rotate the MENU Jog Dial upward. The exposure
control level counter increases (maximum +06).
Go to step 5.
EXPOSURE
AUTO
MANU
To darken the image . . .
Rotate the MENU Jog Dial downward. The exposure
control level counter decreases (maximum –06).
Go to step 5.
No indication
during
recording
EXIT
Exposure Menu Screen
END ADJUSTMENT OF EXPOSURE
Press the MENU Jog Dial. The Menu Screen
5
6
reappears and the highlight bar is placed on “MENU
END”.
00
Exposure
control
level
CLOSE MENU
Press the MENU Jog Dial. The Menu Screen
disappears and the exposure control level counter
reappers to indicate the exposure is adjusted.
counter
Manual Exposure Screen
To brighten the image
NOTES:
● To return to the factory setting, select “AUTO” in step 3.
● To re-adjust exposure, repeat the procedure from step
1.
–
06
+
06
To darken the image
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
31
Viewfinder
MENU
Manual White Balance Adjustment
(M.W.B.)
Menu Screen
4
MENU END
The white balance is usually adjusted automatically.
However, the more advanced camcorder operator would
prefer to control this function manually and achieve a
more professional color/tint reproduction.
FOCUS
AUTO
EXPOSURE
DATE TIME
AUTO
DEC 25.98
TELE MACRO OFF
TAPE LENGTH T30
M. W. B.
AUTO
ZOOM SPEED FAST
ACCESS MENU SCREEN
4
NEXT
Turn the Select Dial to any position except AUTO
LOCK, then press the MENU Jog Dial. The Menu
1
M. W. B.
Screen appears.
M.W.B.
Menu Screen
AUTO
: FINE
ACCESS WHITE BALANCE MENU
: CLOUD
: HALOGEN
SCREEN
MWB
Rotate the MENU Jog Dial to move the highlight bar
to “M.W.B.”, then press it.
2
EXIT
SELECT WHITE BALANCE
Rotate the MENU Jog Dial to move the highlight bar
to the required white balance.
3
“AUTO” ................... Automatic adjustment
“
“
“
: FINE” ............. Outdoors on sunny day
: CLOUD” ........ Outdoors on cloudy day
: HALOGEN” ... Light source is halogen or
tungsten lamp
“MWB” .................... When using a personal White
Balance Setting stored in
memory (see below.)
MENU
Jog Dial
CLOSE MENU
Select Dial
Press the MENU Jog Dial. The Menu Screen
reappears. Then press the MENU Jog Dial again to
exit the Menu Screen.
4
MWB
MWB sets the color temperature for the subject’s light
source so you can shoot with natural colors that are
unaffected by surroundings, even when there are
multiple subjects with different color temperatures.
NOTES:
● To switch to automatic white balance
adjustment, set the M.W.B. in the Menu
Screen to “AUTO”, or turn the Select Dial to
“AUTO LOCK”.
PREPARE WHITE OBJECT
● Re-adjust the White Balance when the
lighting has changed, when the camcorder
has been turned off and on again, or when
the Select Dial’s position has been changed.
● When adjusted by putting colored paper in
front of the subject in step 1 of “MWB”, this
unit makes its color temperature standard for
automatic white balance. So you can enjoy
shooting with different colors. For example,
when adjusting with red, blue or yellow
colors, the image becomes the color which
approximates to green, orange or purple
respectively.
Point the camcorder at a white, flat object such as a
1
2
3
sheet of white paper.
SELECT MWB
Follow step 1 through 3 of the above, select
“MWB”.
MEMORIZE WHITE BALANCE
Press the MENU Jog Dial until “MWB” begins
blinking. “MWB” blinks while the white balance is
being stored in memory, then the Menu Screen
reappears when memorization is complete.
CLOSE MENU
● It is helpful to connect your camcorder to a
color monitor when adjusting the white
balance (੬ pg. 35).
Press the MENU Jog Dial.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Advanced Features (cont.)
32
EN
Self-Timer
Recording
Start/Stop Button
You can set the delay between pressing the Recording
Start/Stop Button and the actual start of recording. If you
secure the camcorder, you (or whomever is operating the
camcorder) can enter the scene before recording starts.
NOTE:
Make sure the camcorder is in the Record-Standby mode
before performing the following steps.
ACCESS MENU SCREEN
Turn the Select Dial to any position except AUTO
Select Dial
1
2
3
LOCK, then press the MENU Jog Dial.
MENU Jog Dial
ACCESS INT. TIME MENU SCREEN
Rotate the MENU Jog Dial to move the highlight bar
to “INT. TIME”, then press the MENU Jog Dial.
Viewfinder
MENU
Menu
Screen
4
MENU END
FOCUS
AUTO
EXPOSURE
DATE TIME
AUTO
SET INTERVAL TIME
DEC 25.98
TELE MACRO OFF
TAPE LENGTH T30
Rotate the MENU Jog Dial to move the highlight bar
to the desired time, then press the MENU Jog Dial.
The Menu Screen reappears and the highlight bar is
placed on “MENU END”.
M. W. B.
AUTO
ZOOM SPEED FAST
4
NEXT
CLOSE MENU
Press the MENU Jog Dial.
4
BACK
REC TIME
INT. TIME
OFF
OFF
4
5
GR-AX847 only
TALLY LAMP ON
TITLE LANG.
JLIP ID NO.
ENGLISH
07
START DELAYED RECORDING
Press the Recording Start/Stop Button. When the
selected time has elapsed, recording begins
automatically.
DEMO MODE OFF
4
MENU END
To Cancel Self-Timer . . .
INT. TIME
REC TIME
... Before the recording begins, press the Recording Start/
Stop Button to display “
TIME” in the Menu Screen to “OFF”.
”, then set “INT.
PAUSE
OFF
OFF
15 S
1 4 S
1 2 S
1 S
30 S
1 MIN
5 MIN
5 S
EXIT
EXIT
INT. TIME Menu
REC TIME Menu
INT. TIME Indicator
INT. TIME and
REC TIME
indications on the
normal screen
15S
1S
REC TIME Indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
33
Animation
Time-Lapse
Give stationary scenes or objects an illusion of
movement. This function allows you to shoot a
series of pictures, each slightly different, of the same
object for a brief period of time.
You can record sequentially at preset time spans.
Leaving the camcorder aimed at a specific subject,
you can record subtle changes over an extended
period of time.
NOTE:
NOTE:
Make sure the camcorder is in the Record-Standby
mode and the recording mode is set to “SP” before
performing the following steps.
Make sure the camcorder is in the Record-Standby
mode and the recording mode is set to “SP” before
performing the following steps.
ACCESS MENU SCREEN
ACCESS MENU SCREEN
Turn the Select Dial to any position except
Turn the Select Dial to any position except
1
2
AUTO LOCK, then press MENU Jog Dial.
1
2
AUTO LOCK, then press MENU Jog Dial.
SET RECORDING TIME
SET INTERVAL BETWEEN
Rotate the MENU Jog Dial to move the
highlight bar to “REC TIME”, then press the
MENU Jog Dial. The REC TIME Menu appears.
Rotate the MENU Jog Dial to move the
highlight bar to the desired time, then press the
MENU Jog Dial. The Menu Screen reappears.
Press the MENU Jog Dial again to exit the
Menu Screen.
RECORDINGS
Rotate the MENU Jog Dial to move the
highlight bar to “INT. TIME”, then press the
MENU Jog Dial. The INT. TIME Menu appears.
Rotate the MENU Jog Dial to move the
highlight bar to the desired time, then press the
MENU Jog Dial. The Menu Screen reappears.
SET RECORDING TIME
START RECORDING
Rotate the MENU Jog Dial to move the
highlight bar to “REC TIME”, then press the
MENU Jog Dial. The REC TIME Menu appears.
Rotate the MENU Jog Dial to move the
highlight bar to the desired time, then press the
MENU Jog Dial. The Menu Screen reappears.
Press the MENU Jog Dial again to exit the
Menu Screen.
Press the Recording Start/Stop Button after
focusing on the subject. The recording stops
automatically after the selected period of time.
3
3
ASSEMBLE SERIES OF
PICTURES
Repeat step 3 for the desired number of
pictures.
4
5
START TIME-LAPSE
RELEASE ANIMATION MODE
RECORDING
Set “REC TIME” in the Menu screen to “OFF”.
Press the Recording Start/Stop Button.
Recording and intervals alternate
automatically.
4
5
NOTES:
RELEASE TIME-LAPSE MODE
● For best results, make sure the camcorder is
secured when shooting in Animation or Time-
Lapse mode.
To release when “
” is displayed, set
PAUSE
“REC TIME” and “INT. TIME” in the Menu
Screen to “OFF”. To release when
” and “REC ” are not displayed,
● Fade-in/out cannot be performed during
Animation or Time-Lapse shooting.
● Before performing other operations following
Animation or Time-Lapse recording, make sure
the Animation or Time-Lapse mode is deactivated.
● Self-Timer, Animation and Time-Lapse are
canceled when the power is shut off or when the
cassette is ejected.
“
PAUSE
press the Recording Start/Stop Button to display
”, then set “REC TIME” and “INT.
TIME” in the Menu Screen to “OFF”.
“
PAUSE
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK Using The Cassette Adapter
34
EN
Cassette Adapter (VHS Playpak)
Use this to play back a VHS-C video cassette recorded
with this camcorder. It is fully compatible with any VHS
video cassette recorder. The C-P7U adapter is battery
powered and automatically performs tape loading and
unloading.
INSERT BATTERY
Slide the battery cover up to remove it, and install
one “AA(R6)” size battery as shown in the illustra-
tion at left. Then reattach the cover.
1
2
3
VCR
INSERT CASSETTE IN ADAPTER
Slide the latch to open the adapter compartment
door, then insert the cassette and close the compart-
ment door.
Compartment door
PLAY BACK ON CONNECTED VCR
Load the cassette adapter into the VCR and play the
tape back as you would any other.
REMOVE CASSETTE FROM
ADAPTER
Slide the latch and the compartment door opens
automatically. This may take around 10 seconds. Do
not attempt to force the adapter open. Then insert
your finger in the hole on the underside of the
adapter as shown in the illustration at left, push up
and remove the cassette.
4
Sliding latch
Reels
Compact video cassette
NOTES:
● During tape loading and unloading, do not touch the
reels for safety and tape protection.
● During special-effect playback (slow motion, still
frame, etc.), the picture may vibrate or noise bars may
appear on the screen.
● To record on a VCR using a compact cassette and the
adapter, cover the adapter’s recording safety hole with
adhesive tape.
Recording safety hole
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK Basic Connections
EN
35
There are three basic types of connections. When making
the connections, refer also to your VCR and TV
instruction manuals.
A
Connection To A VCR (Editing, Dubbing
and Playback)
When
connecting
the cables,
open the
jack cover.
(GR-AX847
only)
NOTE:
Use the optional Audio and Video cables.
To AUDIO and VIDEO
OUT connectors
CONNECT CAMCORDER TO VCR
As shown in the illustration at left, connect the
Audio and Video
cables (optional)
1
Audio and Video cables between the AUDIO and
VIDEO OUT connectors on the camcorder and
those on the VCR.
SUPPLY POWER
To AUDIO and
VIDEO IN
connectors
Turn on the camcorder, the VCR and the TV.
2
3
SELECT MODE
VCR
Set the VCR to its AUX input mode, and set the TV
to its VIDEO mode.
Antenna
Connection To A TV With A/V Input
B
Connectors (Playback ONLY)
NOTE:
Use the optional Audio and Video cables.
CONNECT CAMCORDER TO TV
To AUDIO, VIDEO
and RF DC OUT
connectors
As shown in the illustration at left, connect the
1
2
Audio and Video cables between the AUDIO and
VIDEO OUT connectors on the camcorder and
those on the TV.
RF unit RF-V5U
SELECT MODE
(optional)
Set the TV to its VIDEO or AV mode (as specified in
its instructions).
NOTES:
● It is recommended to use the AC Power
Adapter/Charger as the power supply instead
of the battery pack.
● To monitor the picture and sound from the
camcorder without inserting a tape, set the
camcorder’s Power Switch to “CAMERA”,
then set your TV to the appropriate input
mode.
● If you have a TV or speakers that are not
specially shielded, do not place the speakers
adjacent to the TV as interference will occur
in the camcorder playback picture.
Connection To A TV With NO A/V Input
Connectors (Playback ONLY)
NOTE:
Use the optional RF-V5U RF unit.
* Refer to the RF-V5U instruction manual for connection
procedure.
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK Basic Playback
36
EN
PLAY/PAUSE
LOAD A CASSETTE
Slide EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press PUSH to
ensure the holder is closed and locked.
1
FF
REW
SELECT MODE
Set the Power Switch to “PLAY”. The power
indicator lights.
2
3
4
STOP
PLAY BACK
Press PLAY/PAUSE. The playback picture appears.
STOP PLAYBACK
Press STOP.
Rewind or Fast-forward the tape
Press REW to rewind, or FF to fast-forward the tape
during Stop mode.
Power Switch
NOTE:
The camcorder shuts off automatically after about 5
minutes in Stop mode. To turn on again, set the Power
Switch to “POWER OFF”, then to “PLAY”.
Recording mode indicator
Tape running
indicator
SP
4
M–0:23:45
4
3
: Playback
: Fast-Forward/
Forward Search
: Rewind/Reverse
Search
2
Tape counter
6 : Still Playback
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK Features
EN
37
Tracking
AT
This function can be used to eliminate noise bars that
appear on-screen during playback. Initial setting is Auto
Tracking. Manual Tracking is also available.
ACTIVATE MANUAL TRACKING
Press the MENU Jog Dial during playback mode.
1
Keep rotating it until noise bars disappear.
•To return to Auto Tracking, press the MENU Jog
Dial. “AT” blinks. When Auto Tracking finishes,
the indication disappears.
NOTES:
● When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and “AT” is
displayed.
● Manual Tracking may not work with tapes recorded on
other VCRs or camcorders.
MENU Jog Dial
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK Features (cont.)
38
EN
FEATURE:
PURPOSE:
Still Playback
To pause during playback.
COUNTER R/M
OPERATION:
1) Press PLAY/PAUSE during
playback.
2) To resume normal playback, press
PLAY/PAUSE again.
Noise bars appear and pictures may
become monochrome during Still
Playback. This is normal.
PLAY/PAUSE
FF
NOTE:
REW
STOP
FEATURE:
PURPOSE:
Shuttle Search
To allow high-speed search in either
direction.
OPERATION:
Forward Search
1) Press FF during playback.
Reverse Search
1) Press REW during playback.
Noise bars appear and pictures may
become monochrome or darken in
Shuttle Search. This is normal.
NOTE:
FEATURE:
PURPOSE:
Counter Memory Function
To make it easier to locate a specific
tape segment.
OPERATION:
1) Press COUNTER R/M and hold for
more than 1 second. The counter
resets to “0:00:00”.
2) Press COUNTER R/M for less than
1 second. “M” appears.
3) After recording or playback, press
STOP, then REW. The tape
automatically stops at or close to
0:00:00.
4) Press PLAY/PAUSE to start
playback.
NOTES:
● The counter memory functions in
the Fast-Forward and Rewind
modes.
● To disable Counter Memory
Function, press COUNTER R/M for
less than 1 second so the “M”
disappears.
Download from Www.Somanuals.com. All Manuals Search And Download.
TAPE DUBBING
EN
39
Tape Dubbing
CONNECT EQUIPMENT
Following the illustration at left, connect the
camcorder and the VCR.
1
2
PLAY/PAUSE
PREPARE FOR DUBBING
Set the camcorder’s Power Switch to “PLAY”, turn
on the VCR’s power, and insert the appropriate
cassettes in the camcorder and the VCR.
SELECT VCR MODE
Engage the VCR’s AUX and Record-Pause modes.
3
4
FIND EDIT-IN POINT
Engage the camcorder’s Play mode to find a spot
just before the edit-in point. Once it’s reached, press
PAUSE on the camcorder.
Power Switch
START EDITING
Press PLAY on the camcorder and engage the VCR’s
Record mode.
When connecting
To AUDIO and
VIDEO OUT
connectors
5
6
7
the cables, open
the jack cover.
(GR-AX847 only)
STOP EDITING TEMPORARILY
Engage the VCR’s Record-Pause mode and press
PAUSE on the camcorder.
Audio and Video
cables (optional)
EDIT MORE SEGMENTS
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
To AUDIO and
VIDEO IN
connectors
VCR (Recording deck)
Download from Www.Somanuals.com. All Manuals Search And Download.
USING REMOTE CONTROL UNIT (GR-AX847 only)
The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic
operations (PLAY, STOP, PAUSE, FF, and REW) of your VCR. This remote control unit makes additional
recording functions possible.
40
EN
INSTALLING THE BATTERY
A
B
C
1
2
PULL OUT BATTERY
2
3
a
2
3
1
3
1
HOLDER
Release
tab
A
1
Type
Type
Type
: Pull out by inserting a pointed
Lock hole
1
a
1
instrument into slot
.
B
C
: Pull out while sliding the lock
hole.
: Pinch the release tab and pull
out.
1
2
#
1
7
%
2
7
8
9
0
!
@
$
8
9
INSERT BATTERY
3
4
5
6
Making sure the plus (+) side is up, insert
the lithium battery (CR2025)* into the
battery holder.
2
3
!
5
0
3
^
@
4
6
REPLACE BATTERY HOLDER
Insert the battery holder into the remote
control unit, and push the holder until it
clicks into place.
&
* Read the caution concerning lithium
batteries (੬ pg. 2).
RM-V705U
(provided with
GR-AX847 only)
RM-V700U
(optional)
FUNCTIONS
BUTTONS
With the camcorder’s power switch
set to “CAMERA”.
With the camcorder’s power switch
set to “PLAY”.
1 Infrared beam
Transmits the beam signal.
transmitting window
2 ZOOM (T/W) Buttons Zoom in/out (੬ pg. 18)
—
3 PLAY Button
4 STOP Button
—
Playback start (੬ pg. 36)
Stop (੬ pg. 36)
—
5 REW Button
Retake (rewind)/Quick Review (੬ pg. 19)
Rew/Rew Shuttle Search (੬ pg. 36, 38)
Insert Editing (੬ pg. 46)
6 INSERT Button
7 START/STOP Button
8 INT. TIME Button
9 REC TIME Button
0 PAUSE Button
! FF Button
—
Functions same as the Recording Start/Stop button on the camcorder.
Self-Timer/Time-Lapse (੬ pg. 41)
—
—
Animation/Time-Lapse (੬ pg. 41)
—
Pause (੬ pg. 38)
Retake (forward) (੬ pg. 19)
FF/FF Shuttle Search (੬ pg. 36, 38)
@ A.DUB Button
# PAUSE IN Connector
$ MBR SET Button
% VISS Button
—
Audio dubbing (੬ pg. 47)
—
੬ pg. 43
੬ pg. 42
—
—
Index Code marking (੬ pg. 41)
^ VCR CTL Button
& R.A.EDIT Buttons
—
—
੬ pg. 42
੬ pg. 44
# — & : RM-V700U only.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
41
FEATURE:
PURPOSE:
Self-Timer, Animation and Time-Lapse
The remote control lets you set/release
Interval Timer and Rec Time functions
as well as the Menu Screen.
Transmitted beam
effective area
OPERATION:
Self-Timer
1) Set
15°
Instead of performing steps 1 through
4 on pg. 32 (“Self-Timer”), press INT.
TIME on the remote control. Each
time INT. TIME is pressed, the
Interval Timer indicator appears,
changing in the following order: 15S,
30S, 1MIN, 5MIN and No indication
(off).
Remote sensor
15°
When using the remote control, be sure to
point it at the remote sensor. The above
illustration shows the approximate transmitted
beam effective area for indoor use.
The transmitted beam may not be effective or
may cause incorrect operation outdoors or
when the remote sensor is directly exposed to
sunlight or powerful lighting.
2) Release
Instead of setting “INT. TIME” to
“OFF” in the Menu, press INT. TIME
on the remote control until the
Interval Timer indicator disappears.
Animation
1) Set
Instead of performing steps 1 and 2
on pg. 33 (“Animation”), press REC
TIME on the remote control. Each
time REC TIME is pressed, the Rec
Time indicator appears, changing in
the following order: 1/4S, 1/2S, 1S,
5S and No indication (off).
Interval Timer Indicator
Viewfinder
2) Release
Index Code
Marking
1MIN
1 2S
INDEX
Instead of using the Menu in step 5
on pg. 33, press REC TIME on the
remote control until the Rec Time
indicator disappears.
Time-Lapse
1) Set
Rec Time Indicator
Instead of performing steps 1 through
3 on pg. 33 (“Time-Lapse”), press
INT. TIME and REC TIME on the
remote control. Each time INT. TIME
is pressed, the Interval Timer
indicator appears, changing in the
following order: 15S, 30S, 1MIN,
5MIN and No indication (off). Each
time REC TIME is pressed, the Rec
Time indicator appears, changing in
the following order: 1/4S, 1/2S, 1S,
5S and No indication (off).
2) Release
Instead of using the Menu in step 5
on pg. 33, press INT. TIME and REC
TIME on the remote control until the
indicators disappear.
START/STOP
VISS
NOTE:
Also refer to pgs. 32 and 33.
INT. TIME
REC TIME
FEATURE:
PURPOSE:
Index Code Marking (RM-V700U only)
To give you automatic access to any
selected point on a recording.
OPERATION:
NOTE:
1) Press VISS once to place the index
code. “INDEX” blinks during
marking.
If VISS is pressed during Record-
Standby mode, the mark is placed
where START/STOP is pressed.
RM-V705U
RM-V700U
(optional)
OR
(provided with
GR-AX847 only)
Download from Www.Somanuals.com. All Manuals Search And Download.
USING REMOTE CONTROL UNIT (GR-AX847 only) (cont.)
42
EN
Random Assemble Editing [R.A.Edit]
Create edited videos easily using your camcorder as the
source player. You can select up to 8 “cuts” for automatic
editing, in any order you like. R.A.Edit is more easily
MBR SET
VCR CTL
performed when the optional RM-V700U MBR (Multi-
Brand Remote, ੬ pg. 40) is set to operate with your
brand of VCR (see VCR CODE LIST), but can also be
performed by operating the VCR manually.
Before operation, make sure the lithium battery is
installed in the remote control RM-V700U (੬ pg. 40).
1
4
7
2
5
8
3
6
9
0
RM-V700U
(optional)
SET REMOTE/VCR CODE
VCR CODE LIST
SET REMOTE TO OPERATE VCR
Turn off the power to the VCR and point the remote
VCR BRAND BUTTONS
VCR BRAND BUTTONS
1
2
toward the VCR’s infrared sensor. Then, referring to
the VCR CODE LIST on the left, press and hold MBR
SET, and press button (A) and then (B).
NAME
(A) (B)
NAME
(A) (B)
GE
1
9
9
9
1ꢀ
2ꢀ
`ꢀ
4
PHILIPS
1
3
2ꢀ
3
PANASONIC
1
1
1
9
1
9
9
6
6
9
3ꢀ
7ꢀ
1ꢀ
4ꢀ
8ꢀ
2ꢀ
4ꢀ
6ꢀ
3ꢀ
`
•The code is automatically set once you release the
MBR SET button, and the VCR’s power comes on.
HITACHI
6
6
6ꢀ
3
OPERATE VCR
JVC
A
B
C
9
9
9
1ꢀ
6ꢀ
3
Make sure the VCR’s power is on. Then, while
holding VCR CTL, press the button on the remote for
the desired function. The functions the remote can
control are PLAY, STOP, PAUSE, FF, REW and VCR
REC STBY (you don’t need to press VCR CTL for this
one).
ꢀ
RCA
MAGNAVOX
9
1
7
7
5ꢀ
1ꢀ
1ꢀ
6
SANYO
SHARP
SONY
3
3
1
1
6
6
3
3
6
6
6ꢀ
5
5ꢀ
`
5ꢀ
`ꢀ
9ꢀ
1ꢀ
9ꢀ
1
You’re now ready to try Random Assemble Editing.
MITSUBISHI
NEC
6
6
7ꢀ
8
IMPORTANT
3
3
7ꢀ
8
Although the MBR is compatible with JVC VCRs and
those of many other makers, it may not work with yours
or may offer limited functions.
PHILIPS
1
9
1
9
9
9
9ꢀ
5ꢀ
1ꢀ
4ꢀ
1ꢀ
6
NOTES:
ꢀ
TOSHIBA
ZENITH
● If the VCR’s power doesn’t come on in step 1, try
another code from the VCR CODE LIST.
● Some brands of VCR don’t come on automatically. In
this case, turn the power on manually and try step 2.
● If the RM-V700U is not able to control the VCR, use
the controls on the VCR.
1
6
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
43
MAKE CONNECTIONS
CONNECT TO . . .
A
JVC VCR EQUIPPED WITH REMOTE
PAUSE TERMINAL
Connect the editing cable to the Remote PAUSE
terminal.
1
Open the cover
(GR-AX847 only)
B
C
JVC VCR NOT EQUIPPED WITH REMOTE
PAUSE TERMINAL BUT EQUIPPED WITH
R.A. EDIT CONNECTOR
To J terminal
(JLIP)
To AUDIO and
VIDEO OUT
connectors
Connect the editing cable to the R.A.EDIT
connector.
B
A
VCR OTHER THAN TYPE OR
Editing cable
(optional, ø3.5
mini-plug cable)
Connect the editing cable to the RM-V700U’s
Pause-In jack.
Audio and
Video cables
(optional)
PREPARE CAMCORDER
Insert a recorded tape and set the Power Switch to
“PLAY”.
2
3
C
A B
To Remote
PAUSE
To AUDIO
and VIDEO IN
connectors
PREPARE VCR
Turn the power on, insert a recordable tape and
engage the AUX mode (refer to VCR’s instructions).
To Pause-In
VCR
(Recording deck)
RM-V700U
(optional)
Download from Www.Somanuals.com. All Manuals Search And Download.
USING REMOTE CONTROL UNIT (GR-AX847 only) (cont.)
44
EN
SELECT SCENES
PLAY/PAUSE
FF
ACCESS R.A. EDIT COUNTER
DISPLAY
STOP
Press PLAY/PAUSE, then press ON/OFF and the
1
2
3
counter display appears in the viewfinder and the
screen of the connected TV.
REW
REGISTER BEGINNING OF SCENE
Press REW or FF to locate the beginning of a scene
you want, then press IN/OUT to register that point.
The data appears under “IN” on the display.
REGISTER END OF SCENE
Press REW or FF to locate the end of the scene and
press IN/OUT to register it. The data appears under
“OUT” on the display. The total time of the
registered scene(s) is displayed at the bottom of the
screen.
REGISTER ADDITIONAL SCENES
Repeat steps 2 and 3 for each additional scene
(as many as 8).
4
5
RM-V700U
(optional)
MAKE CORRECTIONS
Press CANCEL during steps 2 and 3 to erase the
FF
PAUSE
most recently registered point.
REW
PLAY
IN/OUT
ON/OFF
CANCEL
NOTES:
● There must be at least one second between an in-point
and its corresponding out-point.
● To ensure correct operation, there should be at least 15
seconds between an out-point and the next in-point.
● Blank portions of tape cannot be registered as in-points
or out-points.
● If it takes more than 5 minutes to search for an in-point,
the VCR’s Record-Pause mode is cancelled and editing
doesn’t take place.
● Pressing ON/OFF clears all in- and out-points from
memory.
● Leave a small margin for error around each in-point to
ensure the scene is recorded in its entirety.
IN
0:00:25
OUT
--:--:--
1
2
3
4
5
6
7
8
COUNTER
TOTAL
0:00:25
0:00:00
IN
OUT
1
2
3
4
5
6
7
8
0:00:25
0:01:05
0:03:18
0:02:33
0:04:11
0:03:31
0:02:53
--:--:--
COUNTER
TOTAL
0:04:11
0:01:13
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
45
AUTOMATIC EDITING TO VCR
Original tape (camcorder)
1
IN
3
2
IN
ENGAGE VCR’S RECORD-PAUSE
MODE
OUT
IN OUT
OUT
Point the remote control toward the VCR’s infrared
sensor and press VCR REC STBY, or manually
engage the VCR’s Record-Pause mode.
1
2
Edited tape (VCR)
BEGIN AUTOMATIC EDITING
Press the MENU Jog Dial on the camcorder, and the
previously selected scenes are copied to the VCR in
the specified order.
While editing, the R.A. Edit counter of the scene
which is beging copied is shown with a blinking
highlight.
STOP
END AUTOMATIC EDITING
When all selected scenes have been copied, the
camcorder and VCR enter the still or pause mode.
Press STOP on both units. To make the R.A. Edit
counter display disappear, press ON/OFF.
3
•When finished editing, be sure to disconnect the
editing cable and the audio/video cable.
NOTES:
C
● If you performed step 1
on page 43 (“MAKE
CONNECTIONS”), keep the remote control pointed at
the VCR during editing.
● The on-screen display only appears while the
camcorder searches for each scene.
MENU Jog Dial
● There may be noise at in- or out-points on the edited
tape with certain VCRs.
RM-V700U
(optional)
ON/OFF
VCR REC STBY
Download from Www.Somanuals.com. All Manuals Search And Download.
USING REMOTE CONTROL UNIT (GR-AX847 only) (cont.)
46
EN
Insert Editing
You can record a new scene into a previously recorded
tape, replacing a section of the original recording with
minimal picture distortion at the in- and out-points. The
COUNTER R/M
original audio remains unchanged.
PLAY/PAUSE
NOTE:
REW
FF
Use the RM-V705U or RM-V700U remote control unit to
perform this procedure.
SELECT MODE
Set the Power Switch to “PLAY”.
1
STOP
FIND EDIT-OUT POINT
Play back the tape, locate the point and press
2
3
PAUSE on the camcorder or the remote control.
RESET COUNTER
Press and hold COUNTER R/M for more than
1 second to reset the tape counter, then press again
for less than 1 second and make sure “M” appears.
Power Switch
Insert editing
indicator
FIND EDIT-IN POINT
Press REW to go a little beyond the beginning of the
scene you want to replace, press PLAY to view the
recorded tape, and press PAUSE exactly at the point
where the new scene should start.
4
5
Tape Counter
M–0:12:34
ENGAGE INSERT EDITING MODE
Press and hold INSERT, and without releasing
INSERT, press and release PAUSE. The Insert mode
is engaged. When the scene the camcorder is aimed
at appears on the screen, go to the next step.
Viewfinder
BEGIN INSERT EDITING
Press START/STOP. When the counter reaches
“0:00:00”, editing stops automatically and the
camcorder enters the Insert-Pause mode.
6
7
END INSERT EDITING
Press STOP.
NOTES:
START/STOP
● After step 5, Retake (੬ pg. 19) can be performed.
● The tape may stop slightly before or after the desig-
nated end point, and noise bars may appear. Neither
indicates a defect in the unit.
REW
PLAY
PAUSE
REW
● Only video signal is recorded in the Insert Editing
mode.
INSERT
RM-V700U
(optional)
RM-V705U
(provided with
GR-AX847 only)
OR
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
47
Audio dubbing indicator
Audio Dubbing
You can record a new soundtrack on a prerecorded tape
(normal audio only).
e
4
M–0:05:20
Perform steps 1, 2 and 3 of the Insert Editing procedure
(੬ pg. 46) before continuing.
•The sound comes from the built-in microphone.
FIND EDIT-IN POINT
Press REW to go a little beyond the beginning of the
1
scene onto which you want to dub new audio, press
PLAY to view the recorded tape, then press PAUSE
at exactly the point where dubbing should start.
Viewfinder
Microphone
ENGAGE AUDIO DUB-STANDBY
MODE
Press and hold A. DUB, and without releasing
A. DUB, press and release PAUSE.
2
3
BEGIN AUDIO DUBBING
Press PLAY. When the counter reaches “0:00:00”,
Audio Dubbing stops automatically and the
camcorder enters the Audio Dub-Standby mode.
END AUDIO DUBBING
Press STOP.
4
REW
PLAY
PAUSE
NOTES:
● Do not press FF or REW during Audio Dub-Standby, or
the edit points will not be accurate.
REW
● If the microphone is too close to the TV, or if the TV’s
volume is too high, whistling or howling may occur.
A. DUB
RM-V705U
(provided with
GR-AX847 only)
RM-V700U
(optional)
OR
NOTES (for Insert Editing and
Audio Dubbing):
● Insert Editing and audio Dubbing may not work
correctly if the tape contains blank segments, or if the
recording speed was changed during the original
recording.
● To edit/dub onto a tape, make sure the Erase Protection
tab is in the position that allows recording. If not, slide
the tab. Some cassettes have removable tabs. If the tab
has been removed, cover the hole with adhesive tape.
● Do not press STOP during Insert Editing or Audio
Dubbing, or the edit points will not be accurate.
● During Insert Editing and Audio Dubbing, when Insert-
Pause or Audio Dub-Standby is engaged, the counter
may go slightly past “0:00:00”. Recording, however,
stops at exactly 0:00:00.
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MAINTENANCE
48
EN
LENS COVER
After Use
Open/Close Switch
Set the Power Switch to “POWER OFF” to turn off
the camcorder.
1
2
3
4
5
Slide EJECT to open the cassette holder, then remove
the cassette.
Close and lock the cassette holder by pressing
PUSH.
Slide BATT. RELEASE to remove the battery pack.
Slide the LENS COVER open/close switch to close
the lens cover.
Set to “POWER OFF”.
BATT. RELEASE
Cleaning The Camcorder
EJECT
CLEAN EXTERIOR
Wipe gently with a soft cloth.
1
CLEAN LENS
Blow it with a blower brush, then wipe gently with
2
3
lens cleaning paper.
PUSH
CLEAN VIEWFINDER
Remove.
1 Turn the eyepiece counterclockwise and pull
it out.
2 Remove dust using a blower brush.
3 Align the marks, re-attach the eyepiece and turn
it clockwise.
NOTES:
● Avoid using strong cleaning agents such as benzine or
alcohol.
● Cleaning should be done only after the battery pack
has been removed or other power units have been
disconnected.
Marks
● Mold may form if the lens is left dirty.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
EN
49
SYMPTOM
POSSIBLE CAUSE(S)
POWER
No power is supplied.
● The battery pack has not been attached correctly
(੬ pg. 8).
● The battery pack is not charged (੬ pg. 8).
● The power supply has not been correctly connected
(੬ pg. 9).
The power suddenly goes off and
doesn’t come back on by itself.
● The battery pack has completely discharged.
● Remove the cassette and disconnect the power source,
then after a few minutes, try turning the power back on. If
it still doesn’t come on, consult your nearest JVC dealer.
RECORDING
Recording cannot be performed.
● Make sure the Erase Protection tab is in the position that
allows recording. If not, slide the tab. Some cassettes have
removable tabs. If the tab has been removed, cover the
hole with adhesive tape.
Recording does not start.L
● The camcorder Power switch has not been set to
“CAMERA” (੬ pg. 16).
PLAYBACK
The tape is running, but there’s no
playback picture.
● The TV has not been set to its VIDEO mode or channel.
● If A/V connection is used, the TV’s VIDEO/TV switch has
not been set to VIDEO.
● The RF unit has not been set to the correct channel.
Playback picture is blurred or
interrupted.
● The video heads are dirty or worn out. Consult your
nearest JVC dealer for head cleaning or replacement.
The counter indication is blurred
during Still playback.
● This is normal.
TAPE TRANSPORT
The tape stops during fast-forward
or rewind.
● The Counter Memory Function has been activated
(੬ pg. 38).
Rewinding or fast-forwarding
cannot be performed.
● The tape is already fully wound on one reel or the other.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING (cont.)
50
EN
SYMPTOM
POSSIBLE CAUSE(S)
OTHER
The tape won’t eject.
● The battery pack is running low.
Some functions are not available.
● The Select Dial is set to “AUTO LOCK”.
Vertical white lines appear when
shooting a very bright object.
● This sometimes occurs when the contrast between the
background and the object is great. It is not a defect of the
camcorder.
Bright, crystal-shaped spots appear
in the viewfinder.
● Sunlight is directly entering the lens. This is not a defect of
the camcorder.
The viewfinder and the lens have
become dirty (ex. fingerprints).
● Wipe them gently with soft cloth.
The picture is blurred in the Quick
Review or Retake mode.
● This is normal while recording in the EP mode. Some
noise may be present while recording in the SP mode
(੬ pg. 12).
An error number (i.e. E03) appears.
● Turn the camcorder’s power off, then disconnect the
power source. After a few minutes, try turning the power
on again. If the error number still appears, consult your
nearest JVC dealer.
The image is out of focus.
● The diopter needs to be adjusted (੬ pg. 14).
● The scene being shot is adversely affecting the operation
of Auto Focus (੬ pg. 28).
The date and time displays
disappear.
● If you remove the power source from the camcorder while
the power is on, all settings and selections are erased.
Make sure to turn the camcorder’s power off before
disconnecting the power source.
The wrong date and time are
displayed/recorded.
● If you have not performed Date/Time Setting (੬ pg. 11),
the date and time are not displayed/recorded correctly. Be
sure that Date/Time setting is carried out.
Even though the Lens Cover is open,
the Lens Cover Warning indicator
blinks.
● The Lens Cover Warning indicator may blink when the
camcorder is used in dark areas, regardless of the position
of the Lens Cover.
The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio,
etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit
(battery pack, AC Power Adapter/Battery Charger, etc.) and clock battery; and then re-connect it and
proceed as usual from the beginning.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
EN
51
1 2 3 4
5
6 7
30MIN
REC SP
TWILIGHT
4
S.LX
T30
8
0
%
&
^
*
444
9
NORM 01
LENS COVER MWB
PAUSE
!
5MIN
1 4S TAPE END
(
@
$
)
#
MERRY CHRISTMAS
DEC 25.98 AM 11:45:18
Viewfinder Indications
1 Cassette Warning/
@ Interval Timer/Recording Time/
Tape Remaining Time ......................... ੬ pg. 17
5Sec. Rec Mode Indicator ............ ੬ pgs. 19,32
# Instant Title Display ............................ ੬ pg. 25
$ Date/Time Display .............................. ੬ pg. 20
% Battery Pack Remaining Power Indicator
When no cassette is inserted: the cassette (
warning blinks.
When Erase Protection tab is not in the position
that allows recording: the cassette ( ) warning
lights. Otherwise, the tape remaining time is
displayed and the tape remaining time warning
blinks when the tape is about to reach its end.
When the Power Switch is set to “PLAY” and a
tape is loaded: the cassette (
displayed regardless of the Erase Protection tab’s
position.
)
Changes as follows according to the battery
pack’s remaining power level:
“
”. When the power is
almost gone, the indicator “ ” blinks (battery
power warning), then the unit shuts off. Replace
the battery pack with a fully charged one.
Note: The symbol containing 3 darkened
) mark is
squares —
— does not necessarily mean
2 Recording Mode (SP/EP) Indicator....... ੬ pg. 12
3, 9 Program AE Indicator ..................... ੬ pg. 22
that the battery pack is fully charged.
^ Focus Indicator ................................... ੬ pg. 29
& Exposure Control Level Counter ......... ੬ pg. 30
* White Balance Mode Indicator ........... ੬ pg. 31
( Clock Battery Warning
Displayed at 3 for approx. 1 second when the
Select Dial is switched from one position to
another. Then only the indicator remains at 9.
3, 0 Fade-Standby Indicator .................. ੬ pg. 24
Blinks for approx. 10 seconds when the power is
turned on. This display also blinks when the
clock (lithium) battery is either not installed or
has discharged. Install or replace the old battery
with a new one (੬ pg. 10).
Displayed at 3 for approx. 2 seconds when the
Fader is engaged by pressing the EFFECT button.
Then only the indicator remains at 0.
4 Multi-Function Control Indication ......੬ pg. 24
Displayed when any of the buttons located on
the Multi-Function Control is pressed. The
indication disappears within approx. 2 seconds.
) •Tape End Display: TAPE END ........... ੬ pg. 17
Appears when the end of the tape is reached
during playback, recording or fast-forward.
5 Super LoLux Indicator ......................... ੬ pg. 25
6 Tape Length Indicator ......................... ੬ pg. 12
7 Zoom Indicator Bar............................. ੬ pg. 18
8 Recording Indicator ............................ ੬ pg. 16
! •Record–Standby Mode Indicator ......੬ pg. 16
•Condensation Warning:
When this indication appears, all functions
except tape eject and power on/off are
disabled. Turn the unit off (without removing
the power source) for a few hours, and when
you turn it on again the indication should
disappear.
•Lens Cover Warning:
LENS COVER ...................................੬ pg. 17
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX Controls
52
EN
5
6
7
u
1
9
0
!
4
8
p
^
i
o
2 3
y
Q
)
E
@ # $ %
(
T
W
q w e r
R
& * t
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
53
Controls
Connectors
1 Power Zoom Button ........................... ੬ pg. 18
2 Select Dial ......................................... ੬ pg. 22
3 Multi-Function Control
) DC IN Jack ......................................... ੬ pg. 9
The jacks q to r are located beneath the jack
cover. (GR-AX847 only)
q J terminal [JLIP (Joint Level Interface Protocol)
Connector.]
•EFFECT Button ................................. ੬ pg. 24
•WIDE Button ................................... ੬ pg. 24
•TITLE Button .................................... ੬ pg. 25
•SUPER LOLUX Button ..................... ੬ pg. 25
•Connect the editing cable when performing
Random Assemble Editing (੬ pg. 42 – 45).
•It is used to connect the camcorder to a device
such as a personal computer.
For further details consult your nearest JVC
dealer.
•JLIP-controlled editing from camcorder to VCR
is not possible if the VCR is not equipped with
a JLIP terminal.
4 PUSH Button...................................... ੬ pg. 13
5 Recording Mode [SP/EP] Button ......... ੬ pg. 12
6 DATE/TIME Button ............................. ੬ pg. 20
COUNTER R/M Button ....................... ੬ pg. 38
7 5SEC. REC [5-sec recording] Button ... ੬ pg. 19
8 REW Button ....................................... ੬ pg. 36
RETAKE R [Quick Review] Button ...... ੬ pg. 19
w VIDEO OUT Connector ..................... ੬ pg. 35
e RF DC OUT Connector ...................... ੬ pg. 35
r AUDIO OUT Connector .................... ੬ pg. 35
9 PLAY/PAUSE Button ........................... ੬ pg. 36
0 FF Button ........................................... ੬ pg. 36
RETAKE F Button ................................ ੬ pg. 19
Indicators
t Power Indicator .................................. ੬ pg. 16
y Tally Lamp (GR-AX847 only) .............. ੬ pg. 16
! STOP Button ...................................... ੬ pg. 36
@ EJECT Switch ...................................... ੬ pg. 13
# Function Navigator Dial
[MENU Jog Dial] ................................ ੬ pg. 11
Other Parts
u Video Light (GR-AX847 only) ............. ੬ pg. 21
i Microphone ....................................... ੬ pg. 47
$ LIGHT OFF/AUTO/ON Switch
(GR-AX847 only) ................................ ੬ pg. 21
% BATT. [Battery] RELEASE Switch ......... ੬ pg. 8
^ Diopter Adjustment ............................ ੬ pg. 14
& Recording Start/Stop Button................ ੬ pg. 16
* Power Switch ................................ ੬ pg.16, 36
( LENS COVER Switch .......................... ੬ pg. 16
o •Camera sensor
Be careful not to cover this area; built-in
here is the sensor necessary for shooting.
•Remote Sensor (GR-AX847 only) ..... ੬ pg. 41
p Clock Battery Compartment ............... ੬ pg. 10
Q Battery Pack Mount ............................ ੬ pg. 8
W Shoulder Strap Eyelets ........................ ੬ pg. 15
E Electronic Viewfinder ......................... ੬ pg. 14
R Grip Strap .......................................... ੬ pg. 14
T Tripod Mounting Socket ..................... ੬ pg. 15
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX Terms
54
EN
A
N
AC Power Adapter .................................. pg. 8
Animation Recording .............................. pg. 33, 41
Audio Dubbing ....................................... pg. 47
Auto Date Record ................................... pg. 20
Auto Focus.............................................. pg. 28
Auto Mode Lock Mode ........................... pg. 23
Auto Mode Release Mode ....................... pg. 23
ND Effect Mode ...................................... pg. 23
P
Playback ................................................. pg. 36
Program AE with Special Effects .............. pg. 22, 23
Provided Accessories .............................. pg. 6
Q
B
Quick Review ......................................... pg. 19
Battery Pack ............................................ pg. 8, 55
Brighten the Image .................................. pg. 30
R
Random Assemble Editing ....................... pg. 42–45
Recording, Advanced Features ................ pg. 22–33
Recording ............................................... pg. 16
Recording, Start/Stop............................... pg. 16, 17
Recording Mode Setting.......................... pg. 12
Record-Standby ...................................... pg. 16
Remote Control Unit ............................... pg. 40
Remove Cassette ..................................... pg. 13
Retake..................................................... pg. 19
Rewind Tape ........................................... pg. 36
C
Car Battery .............................................. pg. 9
Cassette Adapter ..................................... pg. 34
Charge Marker ........................................ pg. 9
Charging the Battery Pack ....................... pg. 8
Clock (Lithium) Battery ........................... pg. 10
Connection to a VCR/TV ......................... pg. 35
Contents ................................................. pg. 7
Counter Memory ..................................... pg. 38
S
D
Self-Timer ............................................... pg. 32, 41
Sepia Mode............................................. pg. 23
Shoulder Strap Attachment ...................... pg. 15
Shuttle Search ......................................... pg. 38
Specifications.......................................... pg. 57
Sports Mode............................................ pg. 23
Still Playback .......................................... pg. 38
Super LoLux ............................................ pg. 25
Darken the Image ................................... pg. 30
Date/Time Insert...................................... pg. 20
Date/Time Setting.................................... pg. 11
DEMO Mode .......................................... pg. 27
Discharge the Battery pack...................... pg. 8
Diopter Adjust......................................... pg. 14
E
Electronic Fog Filter Mode ...................... pg. 23
Erase Protection ...................................... pg. 13
Exposure Control .................................... pg. 30
T
Tape Counter .......................................... pg. 36
Tape Dubbing ......................................... pg. 39
Tape Length Setting ................................. pg. 12
Time-Lapse Shooting ............................... pg. 33, 41
Tracking .................................................. pg. 37
Tripod Mounting ..................................... pg. 15
Twilight Mode ......................................... pg. 23
F
Fade-in/out ............................................. pg. 24
Fast-Forward Tape ................................... pg. 36
5Sec. Rec ................................................ pg. 19
G
V
Grip Adjustment...................................... pg. 14
Video Light ............................................. pg. 21
Viewfinder Adjustment ............................ pg. 14
Viewfinder, indications............................ pg. 51
H
High Speed Shutter Mode ....................... pg. 23
I
W
Index Code Marking ............................... pg. 41
Insert Cassette ......................................... pg. 13
Insert Editing ........................................... pg. 46
Instant Titles ............................................ pg. 25
White Balance Adjustment ...................... pg. 31
Wide Mode ............................................. pg. 24
Z
Zooming ................................................. pg. 18
M
Manual Focus ......................................... pg. 29
MBR Code Setting ................................... pg. 42
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS
EN
55
DANGER:
Battery Packs
The supplied battery pack is a
nickel-cadmium battery. Before
using the supplied battery pack
or an optional battery pack, be
sure to read the following
cautions:
Video Light
•The video light becomes extremely hot. Do not
touch it either while in operation or soon after
turning it off, otherwise serious injury may result.
•Do not place the camcorder into the carrying case
immediately after using the video light, since it
remains extremely hot for some time.
1. To avoid hazard . . .
Terminals
.... do not burn.
•When operating, keep a distance of about 30 cm
(1 ft.) between the video light and people or
object.
•Do not use near flammable or explosive materials.
•It is recommended that you consult your nearest
JVC dealer for replacing the video light.
.... do not short-circuit the terminals.
.... do not modify or disassemble.
.... use only specified chargers.
2. To prevent damage and prolong service life . . .
.... do not subject to unnecessary shock.
.... avoid repeated charging without fully
discharging.
When using the AC Power Adapter/Charger in
areas other than the USA
Ⅲ The provided AC Power Adapter/Charger features
automatic voltage selection in the AC range from
110 V to 240 V.
.... charge in an environment where tempera-
tures are within the tolerances shown in the
chart below. This is a chemical reaction type
battery—cooler temperatures impede
chemical reaction, while warmer tempera-
tures can prevent complete charging.
.... store in a cool, dry place. Extended exposure
to high temperatures will increase natural
discharge and shorten service life.
.... avoid prolonged uncharged storage.
.... remove from charger or powered unit when
not in use, as some machines use current
even when switched off.
USING HOUSEHOLD AC PLUG ADAPTER
In case of connecting the unit’s power cord to an
AC wall outlet other than American National
Standard C73 series type use an AC plug adapter,
called a “Siemens Plug”, as shown.
For this AC plug adapter, consult your nearest JVC
dealer.
Plug adapter
NOTES:
●It is normal for the battery pack to be warm after
charging, or after use.
Temperature Range Specifications
Charging.............. 10°C to 35°C (50°F to 95°F)
Operation ............ 0°C to 40°C (32°F to 104°F)
Storage ................ –10°C to 30°C (14°F to 86°F)
●Recharging time is based on room temperature of
20°C.
General Battery Precautions
•When the C-P6U or C-P7U (cassette adapter) is
not functioning even when correctly operated, the
battery is exhausted. Replace it with a fresh one.
•Use only the following battery:
●The lower the temperature, the longer recharging
takes.
C-P6U or C-P7U..................... AA (R6) size
Please make note of the following rules for battery
use. When misused, battery can leak or explode.
1. Refer to the C-P6U/C-P7U instructions when
replacing the battery.
2. Do not expose the battery to excessive heat as it
can leak or explode.
3. Do not dispose of battery in a fire.
4. Remove battery from the unit if it is to be stored
for an extended period to avoid battery leakage
which can cause malfunctions.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS (cont.)
56
EN
3. DO NOT leave the unit . . .
Cassettes
.... in places of over 50°C (122°F).
.... in places where humidity is extremely low.
(below 35%) or extremely high (above 80%).
.... in direct sunlight.
.... in a closed car in summer.
.... near a heater.
To properly use and store your cassettes, be sure to
read the following cautions:
1. During use . . .
.... make sure the cassette bears the VHS-C
mark.
.... be aware that recording onto prerecorded
tapes automatically erases the previously
recorded video and audio signals.
.... make sure the cassette is positioned properly
when inserting.
.... do not load and unload the cassette
repeatedly without allowing the tape to run
at all. This slackens the tape and can result in
damage.
.... do not open the front tape cover. This
exposes the tape to fingerprints and dust.
4. To protect the unit, DO NOT . . .
.... allow it to become wet.
.... drop the unit or strike it against hard objects.
.... subject it to shock or excessive vibration
during transportation.
.... keep the lens directed at extremely bright
objects for long periods.
.... direct the eyepiece of the viewfinder at the
sun.
.... carry it by holding the viewfinder. Be sure to
hold the main unit with both hands or use
the grip.
2. Store cassettes . . .
.... swing it excessively when using the shoulder
strap.
.... away from heaters or other heat sources.
.... out of direct sunlight.
.... where they won’t be subject to unnecessary
shock or vibration.
.... where they won’t be exposed to strong
magnetic fields (such as those generated by
motors, transformers or magnets).
.... vertically, in their original cases.
About moisture condensation . . .
● You may have observed that pouring a cold
liquid into a glass will cause drops of water to
form on the glass’ outer surface. This same
phenomenon occurs on the head drum of a
camcorder when it is moved from a cool
place to a warm place, after heating a cold
room, under extremely humid conditions or
in a place directly subjected to the cool air
from an air conditioner.
Main Unit
1. For safety, DO NOT . . .
.... open the camcorder’s chassis.
.... disassemble or modify the unit.
.... short-circuit the terminals of the battery pack.
Keep it away from metallic objects when not
in use.
.... allow inflammables, water or metallic objects
to enter the unit.
.... remove the battery pack or disconnect the
power supply while the power is on.
.... leave the battery pack attached when the
camcorder is not in use.
● Moisture on the head drum can cause severe
damage to the video tape, and can lead to
internal damage to the camcorder itself.
Serious malfunctioning
2. Avoid using the unit . . .
If malfunctioning occurs, stop using the unit
immediately and consult your local JVC dealer.
.... in places subject to excessive humidity or
dust.
.... in places subject to soot or steam such as
near a cooking stove.
.... in places subject to excessive shock or
vibration.
.... near a television set.
.... near appliances generating strong magnetic
or electric fields (speakers, broadcasting
antennas, etc.).
.... in places subject to extremely high (over
40°C or 104°F) or extremely low (under 0°C
or 32°F) temperatures.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
GENERAL
EN
57
VIDEO
Output
Format
Power source
Power consumption
: VHS NTSC standard
: DC 6V
: 1 Vp-p, 75 ohms,
unbalanced (via VIDEO
OUT connector)
•GR-AX847 light on : 8.0 W
•GR-AX847 light off : 5.1 W
AUDIO
Output
•GR-AX247
Signal system
Video recording system
Luminance
: 5.0 W
: –8 dBs, 1 k-ohm
(via AUDIO OUT
connector)
: NTSC-type
: FM recording
: Converted sub-carrier
direct recording
Conforms to VHS
standard
AC POWER ADAPTER/BATTERY CHARGER
(AA-V15U)
Power requirement
Color
: AC 110 V to 240 V`,
50/60 Hz
: 23 W
Cassette
Tape speed
:
cassette
Power consumption
Output
Charge
VTR
Charging system
SP
EP
:
:
33.35 mm/sec. (1-5/16 ips)
11.12 mm/sec. (7/16 ips)
: DC 8.5 V
: DC 6.3 V
, 1.3 A
, 1.8 A
Recording time (max.)
: Constant current,
peak detection,
timer controlled
: 140 (W) x 42 (H) x
68 (D) mm (5-9/16” x
1-11/16” x 2-11/16”)
: Approx. 300 g (0.71 lbs)
SP
EP
: 40 minutes
: 120 minutes
(with TC-40 cassette)
Dimensions
Weight
Operating temperature : 0°C to +40°C
(32°F to 104°F)
Operating humidity
Storage temperature
: 35% to 80%
: –20°C to +50°C
(–4°F to 122°F)
CASSETTE ADAPTER (C-P7U)
Dimensions
Weight
: 188 (W) x 25 (H) x
104 (D) mm (7-7/16” x
1” x 4-1/8”)
: Approx. 240 g (0.53 lbs)
: “AA (R6)”-size battery x 1
•GR-AX847
•GR-AX247
Dimensions
(Including viewfinder)
•GR-AX847
: Approx. 790 g (1.8 lbs)
: Approx. 800 g (1.8 lbs)
Weight
Accessory
: 113 (W) x 117 (H) x
222 (D) mm (4-1/2” x
4-5/8” x 8-3/4”)
: 113 (W) x 117 (H) x
242 (D) mm (4-1/2” x
4-5/8” x 9-9/16”)
Provided Accessories ...................... ੬ pg. 6
•GR-AX247
Optional Accessories
•Battery Packs BN-V12U, BN-V22U, BN-V25U
•Car Battery Charger BH-V3U
•Battery Charger BH-VC10U
CAMERA
•Car Battery Cord AP-V7U
•RF Unit RF-V5U
•Compact VHS-C Cassettes TC-40/30/20
•Active Carrying Bag CB-V7U
•Remote Control Unit RM-V700U
Pick up
Lens
: 1/4” format CCD
: F1.6, f = 3.8 to 83.6 mm,
22:1 power zoom lens
with auto iris and macro
control, filter diameter
46 mm
Viewfinder
:
Electronic viewfinder with
• 0.55” color LCD
(GR-AX847)
Some acccessories are not available in some areas.
Please consult your nearest JVC dealer for details on
accessories and their availability.
• 0.5” B/W CRT
(GR-AX247)
Specifications shown are for SP mode unless
otherwise indicated.
E. & O. E. Design and specifications subject to
change without notice.
White balance
adjustment
: Auto/Manual adjustment
Download from Www.Somanuals.com. All Manuals Search And Download.
|