JVC Camcorder 1000MKVUNVP User Manual

ENGLISH  
CONTENTS  
SAFETY PRECAUTIONS  
2 – 3  
COMPACT  
VHS CAMCORDER  
AUTOMATIC DEMONSTRATION 4  
PROVIDED ACCESSORIES  
GETTING STARTED  
4
6 – 13  
RECORDING  
14 – 29  
Basic Recording .......................... 14  
Basic Features ........................... 16  
Zooming, Picture Stabilizer, Quick Review,  
Video Light, Retake  
GR-SXM607  
GR-SXM55  
Advanced Features ...................... 18  
Snapshot, Night-Scope, Fade/Wipe Effects,  
Program AE with Special Effects,  
Digital Effects, Using Menu For Detailed  
Adjustment, Date/Time Insert, Instant Titles,  
Animation, Time-Lapse, Exposure Control,  
Focusing, White Balance Adjustment,  
Manual White Balance Operation  
PLAYBACK  
30 – 34  
Basic Playback ........................... 30  
Features ..................................31  
Connections............................... 32  
Using The Cassette Adapter ...........34  
VICTOR COMPANY OF JAPAN, LIMITED  
USING THE REMOTE CONTROL  
UNIT (GR-SXM607 only)  
35 – 43  
Playback Zoom .......................... 37  
Animation And Time-Lapse .............37  
Insert Editing ............................. 38  
Audio Dubbing ........................... 39  
Random Assembly Editing.............. 40  
VHS  
PAL  
625  
DETAILS  
44  
45 – 47  
48 – 49  
50 – 53  
CAUTIONS  
TROUBLESHOOTING  
INDEX  
Controls, Connectors  
And Indicators ......................... 50  
Indications ................................52  
TERMS  
54  
55  
SPECIFICATIONS  
1P0ri0n0teMdKinV*JaUpNan*VP  
EK  
COPYRIGHT© 2000 VICTOR COMPANY OF JAPAN, LTD.  
INSTRUCTIONS  
LYT0672-001A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2EN  
Dear Customer,  
Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety information  
and precautions contained in the following pages to ensure safe use of this product.  
Using This Instruction Manual  
All major sections and subsections are listed in the  
WARNING:  
Table Of Contents on the cover.  
TO PREVENT FIRE OR SHOCK  
Notes appear after most subsections. Be sure to  
read these as well.  
HAZARD, DO NOT EXPOSE  
Basic and advanced features/operation are  
THIS UNIT TO RAIN OR  
separated for easier reference.  
MOISTURE.  
It is recommended that you . . .  
.... refer to the Index (pgs. 50 – 53) and  
familiarize yourself with button locations, etc.  
before use.  
CAUTIONS:  
.... read thoroughly the Safety Precautions. They  
To prevent shock, do not open the cabinet. No  
contain extremely important information  
user serviceable parts inside. Refer servicing to  
regarding the safe use of this product.  
qualified personnel.  
When you are not using the AC Adapter for a long  
period of time, it is recommended that you  
disconnect the power cord from AC outlet.  
You are recommended to carefully read the  
cautions on pages 45 – 47 before use.  
NOTES:  
The rating plate (serial number plate) and safety  
caution are on the bottom and/or the back of the  
main unit.  
The rating information and safety caution of the  
AC Adapter are on its bottom.  
SAFETY  
PRECAUTIONS  
IMPORTANT  
Connection to the mains supply in the United  
Kingdom.  
DO NOT cut off the mains plug from this equipment.  
If the plug fitted is not suitable for the power points in  
your home or the cable is too short to reach a power  
point, then obtain an appropriate safety approved  
extension lead or consult your dealer.  
To avoid electric shock or  
CAUTION:  
damage to the unit, first  
firmly insert the small end of  
the power cord into the AC  
Adapter until it is no longer  
wobbly, and then plug the  
larger end of the power cord  
into an AC outlet.  
BE SURE to replace the fuse only with an identical  
approved type, as originally fitted, and to replace the  
fuse cover.  
If nonetheless the mains plug is cut off be sure to  
remove the fuse and dispose of the plug immediately,  
to avoid possible shock hazard by inadvertent  
connection to the mains supply.  
If this product is not supplied fitted with a mains plug  
then follow the instructions given below:  
DO NOT make any connection to the Larger Terminal  
coded E or Green.  
The wires in the mains lead are coloured in accord-  
ance with the following code:  
Crossed Out Dust Bin Mark  
The Crossed Out Dust Bin  
Mark on the battery pack  
indicates that the product  
complies with Directives  
91/157/EEC and 93/86/EEC.  
Nickel-Cadmium (Ni-Cd)  
battery pack must be recycled  
or disposed of properly.  
Blue to N (Neutral) or Black  
Brown to L (Live) or Red  
If these colours do not correspond with the terminal  
identifications of your plug, connect as follows:  
Blue wire to terminal coded N (Neutral) or coloured  
black.  
Brown wire to terminal coded L (Live) or coloured Red.  
If in doubt consult a competent electrician.  
625  
Cassettes marked “  
used with this camcorder.  
However, S-VHS recordings are possible only with  
cassettes marked “  
” and “  
” can be  
”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN3  
When the equipment is installed in a cabinet or on  
a shelf, make sure that it has sufficient space on all  
sides to allow for ventilation (10 cm or more on  
both sides, on top and at the rear).  
This camcorder is designed to be used with  
PAL-type colour television signals. It cannot be used for  
playback with a television of a different standard.  
However, live recording and LCD monitor/viewfinder  
playback are possible anywhere. Use the JVC  
BN-V11U**/V12U/V20U/V400U battery packs and, to  
recharge them or to supply power to the camcorder from  
an AC outlet, use the provided multi-voltage AC Adapter.  
(An appropriate conversion adapter may be necessary to  
accommodate different designs of AC outlets in different  
countries.)  
Do not block the ventilation holes.  
(If the ventilation holes are blocked by a newspaper,  
or cloth etc. heat may not be able to get out.)  
No naked flame sources, such as lighted candles,  
should be placed on the apparatus.  
When discarding batteries, environmental problems  
must be considered and local rules or laws  
governing the disposal of these batteries must be  
followed strictly.  
*GR-SXM55 only.  
Caution on Replaceable lithium battery  
The apparatus shall not be exposed to dripping or  
splashing.  
The battery used in this device may present a fire or  
chemical burn hazard if mistreated.  
Do not recharge, disassemble, heat above 100°C or  
incinerate.  
Do not use this equipment in a bathroom or places  
with water.  
Also do not place any containers filled with water or  
liquids (such as cosmetics or medicines, flower  
vases, potted plants, cups etc.) on top of this unit.  
(If water or liquid is allowed to enter this  
equipment, fire or electric shock may be caused.)  
Replace battery with Panasonic (Matsushita Electric),  
Sanyo, Sony or Maxell CR2025.  
Danger of explosion or Risk of fire if the battery is  
incorrectly replaced.  
Dispose of used battery promptly.  
Keep away from children.  
Do not disassemble and do not dispose of in fire.  
SOME DO’S AND DON’TS ON THE SAFE  
USE OF EQUIPMENT  
This equipment has been designed and manufactured to meet international safety standards but, like any  
electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.  
DO read the operating instructions before you attempt to use the equipment.  
DO ensure that all electrical connections (including the mains plug, extension leads and interconnections  
between pieces of equipment) are properly made and in accordance with the manufacturers instructions.  
Switch off and withdraw the mains plug when making or changing connections.  
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.  
DO be careful with glass panels or doors on equipment.  
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in  
any way switch off, withdraw the mains plug and consult your dealer.  
DON’T remove any fixed cover as this may expose dangerous voltages.  
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for  
unattended operation or has a standby mode. Switch off using the switch on the equipment and make  
sure that your family knows how to do this. Special arrangements may need to be made for infirm or  
handicapped people.  
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of road  
safety. It is illegal to watch television whilst driving.  
DON’T listen to headphones at high volume, as such use can permanently damage your hearing.  
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will  
cause damage and shorten the life of the equipment.  
DON’T use makeshift stands and NEVER fix legs with wood screws to ensure complete safety always fit the  
manufacturers approved stand or legs with the fixings provided according to the instructions.  
DON’T allow electrical equipment to be exposed to rain or moisture.  
ABOVE ALL  
NEVER let anyone especially children push anything into holes, slots or any other opening in the case  
this could result in a fatal electrical shock;  
NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4EN  
AUTOMATIC DEMONSTRATION  
Automatic Demonstration takes place when DEMO MODEis set to ON”  
(factory-preset).  
Available when the Power Switch is set to ” ” or ” ”.  
Operating the Power Zoom Lever during the demonstration stops the  
DEMO MODE  
demonstration temporarily. If the Power Zoom Lever is not moved for  
more than 1 minute after that, the demonstration will resume.  
OFF  
ON  
DEMO MODEremains ONeven if the camcorder power is turned  
off.  
To cancel Automatic Demonstration, set the Power Switch to “ ” and  
press MENU while the demo is in progress. This takes you directly to the  
demo modes Setting Menu (so you will not have to go through the main  
Menu Screen). Rotate MENU to select OFFand press it.  
EX I T  
Setting Menu  
NOTE:  
When a tape whose Erase Protection tab is in the position that allows recording is loaded in the  
camcorder, demonstration is not available.  
PROVIDED ACCESSORIES  
AC Adapter  
Shoulder Strap  
AP-V10EG  
Power Cord  
Lens Cap  
Cable Adapter  
Remote Control Unit RM-V715U  
(GR-SXM607 only)  
Core Filter x 4  
(for provided A/V Cable,  
S-Video Cable and AC Adapter)  
Battery Pack  
BN-V11U (GR-SXM55)  
BN-V20U (GR-SXM607)  
A/V (Audio/Video) Cable  
S-Video Cable  
AAA (R03) Battery x 2  
(for Remote Control Unit,  
GR-SXM607 only)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN5  
How To Attach The Core Filter  
Attach the provided Core Filter to the provided A/V Cable, S-Video Cable and AC Adapter.  
The Core Filter reduces interference.  
1
2
Release the stoppers on both ends of the Core  
Filter.  
1
2
5 cm  
Run the cable through the Core Filter, leaving  
approx. 5 cm of cable between the cable plug  
and the Core Filter. Wind the cable around the  
outside of the Core Filter as shown in the  
illustration.  
Stopper  
Wind the cable so that it is not slack.  
NOTE:  
Take care not to damage the cable.  
3
Close the Core Filter until it clicks shut.  
Connect the end of the cable with the Core  
Filter to the camcorder.  
3
With the provided AC Adapter, attach Core Filters to both ends of the cable as shown below.  
5 cm  
5 cm  
How To Attach The Lens Cap  
To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.  
1
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED  
6EN  
Hook on.  
Power  
1
This camcorders 2-way power supply system lets you  
choose the most appropriate source of power. Do not use  
provided power supply units with other equipment.  
CHARGING THE BATTERY PACK  
Push in.  
2
Make sure the battery pack is attached to the  
1
camcorder. Hook its end to the camcorder 1 and  
push the battery in until it locks in place 2.  
If the battery pack is attached in the wrong position,  
a malfunction may occur.  
BATTERY RELEASE Switch  
REFRESH Button  
Set the Power Switch to OFF. Connect the AC  
Adapter to the camcorder 3, then connect the Power  
Cord to the AC Adapter 4.  
2
3
4
REFRESH Lamp  
CHARGE Lamp  
Plug the Power Cord into an AC outlet 5.  
The CHARGE lamp on the camcorder blinks to  
indicate charging has started.  
Battery pack  
When the CHARGE lamp stops blinking but stays lit,  
charging is finished. Unplug the Power Cord from the  
AC outlet. Disconnect the AC Adapter from the  
camcorder.  
Power Switch  
To Detach The Battery Pack . . .  
.... slide BATTERY RELEASE and pull out the battery pack.  
To AC outlet  
To DC IN  
connector  
3
NOTES:  
During charging or discharging, the camcorder cannot  
be operated.  
5
AC Adapter  
Charging and discharging is not possible if the wrong  
type of battery is used.  
4
When charging the battery pack for the first time or after  
a long storage period, the CHARGE lamp may not light.  
In this case, remove the battery pack from the  
camcorder, then try charging again.  
If the battery operation time remains extremely short  
even after having been fully charged, the battery is worn  
out and needs to be replaced. Please purchase a new  
one.  
Using the optional AA-V15EK AC Power Adapter/  
Charger, you can charge the BN-V11U/V12U/V20U/  
V400U battery pack without the camcorder. However, it  
cannot be used as an AC adapter.  
Battery pack  
Charging time  
BN-V11U*  
approx. 1 hr. 10 min.  
approx. 1 hr. 10 min.  
approx. 1 hr. 50 min.  
approx. 3 hrs. 40 min.  
BN-V12U (optional)  
BN-V20U** (optional)  
BN-V400U (optional)  
* GR-SXM55 only.  
**Provided with GR-SXM607 only.  
REFRESH:  
Charging a battery with some charge remaining reduces that batterys capacity. Perform the procedure  
below to fully discharge the battery pack before recharging.  
1. Perform steps 1 through 3 of CHARGING THE BATTERY PACK.  
2. Press REFRESH on the camcorder for over 2 seconds. The REFRESH lamp on the camcorder blinks to  
indicate discharging has started.  
3. When discharging is finished, charging automatically starts and the CHARGE lamp blinks.  
When you are not using a battery pack for a long period of time, be sure to fully discharge it before storing  
because leaving a battery with some charge left over also reduces performance.  
For other notes, pg. 44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN7  
USING THE BATTERY PACK  
ATTENTION:  
Perform step 1 of CHARGING THE BATTERY PACK”  
(pg. 6).  
Before detaching the power source, make  
sure that the camcorders power is turned  
off. Failure to do so can result in a  
camcorder malfunction.  
Approximate recording time (unit: min.)  
Battery pack  
Viewfinder on  
LCD monitor on  
BN-V11U  
95  
(50)  
80  
(45)  
Charge marker  
BN-V12U  
(optional)  
95  
80  
A charge marker is provided on  
the battery pack to help you  
remember whether it has been  
charged or not. Two colours are  
provided (red and black)you  
choose which one means  
charged and which means  
discharged.  
(50)  
(45)  
BN-V20U  
(optional)  
150  
(85)  
135  
(75)  
BN-V400U  
(optional)  
360  
(205)  
315  
(190)  
(
) : when the video light is on (GR-SXM607 only)  
NOTES:  
Recording time is reduced significantly under the  
following conditions:  
Zoom or Record-Standby mode is engaged repeatedly.  
The LCD monitor is used repeatedly.  
Before extended use, it is recommended that you  
prepare enough battery packs to cover 3 times the  
planned shooting time.  
USING AC POWER  
Use the AC Adapter (connect as shown in the illustration).  
NOTES:  
The provided AC Adapter features automatic voltage  
selection in the AC range from 110 V to 240 V.  
For other notes, pg. 44.  
To AC outlet  
To DC IN  
connector  
AC Adapter  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED (cont.)  
Grip Adjustment  
8EN  
Power Zoom  
Lever  
Separate the Velcro strip.  
1
2
3
Recording  
Start/Stop  
Button  
Pass your right hand through the loop and grasp the  
grip.  
Adjust so that your thumb and fingers can easily  
operate the Recording Start/Stop Button and Power  
Zoom Lever. Refasten the Velcro strip.  
3
Viewfinder Adjustment  
2
180°  
Set the Power Switch to “ ” or “ ”.  
1
2
3
Adjust the viewfinder manually for best viewability.  
1
Turn the Dioptre Adjustment Control until the  
indications in the viewfinder are clearly focused.  
Set to “ ” or  
.  
Shoulder Strap Attachment  
PAUSE  
Following the illustration, thread the strap through the  
1
2
eyelet 1, then fold it back and thread it through the  
buckle 2. Repeat the procedure to attach the other  
end of the strap to the other eyelet 3, making sure  
the strap is not twisted.  
2
3
1
Adjust as shown in the illustration 4.  
4
Tripod Mounting  
Align the screw and camera direction stud on the  
1
tripod with the cameras mounting socket and stud  
hole. Then tighten the screw.  
CAUTION:  
When using a tripod, be sure to open and extend  
its legs fully to Stabilize the camcorder. To  
prevent damage to the unit caused by falling  
over, do not use a small-sized tripod.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN9  
MENU Wheel  
Date/Time Settings  
Set the Power Switch to “ ”. The power lamp  
1
2
3
comes on.  
Press MENU. The Menu Screen appears.  
Rotate MENU to select TO SYSTEM MENUand  
press it to display SYSTEM MENU. Rotate MENU to  
select NEXTand press it to display the next page.  
Power Switch  
Rotate MENU to select DATE/TIMEand press it.  
4
5
The DATE/TIME Menu appears.  
Display  
To set YEAR, MONTH, DAYor TIME(hour/  
minute), rotate MENU to select the desired item, and  
press it. When the setting begins blinking, rotate  
MENU until the correct setting appears and then  
press it. The setting stops blinking.  
CAMERA MENU  
TO SYSTEM MENU  
Menu Screen  
FOCUS  
EXPOSURE  
M. W. B.  
AUTO  
AUTO  
AUTO  
When none of these settings (YEAR, MONTH,  
DAY, TIME) blinks, rotate MENU to select EXIT,  
and press it. The Menu Screen reappears with the  
highlight bar on RETURN.  
6
7
SYSTEM MENU  
NEXT  
REC MODE  
D. ZOOM  
SP  
50  
x
Press MENU to close the Menu Screen.  
SYSTEM MENU  
TO CAMERA MENU  
REC T I ME  
OFF  
I NT . T I ME  
TELE MACRO  
T I TLE LANG.  
DATE / T I ME  
J L I P I D NO.  
DEMO MODE  
OFF  
NOTE:  
OFF  
FRENCH  
To display the date and time in the camcorders display and  
on a connected TV, see Date/Time Insert(pg. 25).  
06  
OFF  
RETURN  
DATE / T I ME  
DATE/TIME Menu  
YEAR  
MONTH  
DAY  
2001  
6
28  
:
T I ME  
20 20  
24-hour  
indication  
EX I T  
For other notes, pg. 44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED (cont.)  
10EN  
MENU Wheel  
Recording Format Setting  
Set the recording format according to the format of the  
tape used or type of recording you wish to perform.  
NOTE:  
S-VHS ET recording is not possible when the recording  
mode is set to LP.  
Before performing the following steps, make sure that the  
recording mode is set to SP(pg. 12).  
Set the Power Switch to “ ”. The power lamp  
1
2
3
comes on.  
Power Switch  
Press MENU. The Menu Screen appears.  
Display: when a VHS cassette is loaded.  
Rotate MENU to select TO SYSTEM MENUand  
press it to display SYSTEM MENU.  
If a VHS cassette is loaded . . .  
.... rotate MENU to select S-VHS ET, then press it.  
The S-VHS ET Setting Menu appears.  
SYSTEM MENU  
Menu Screen  
NEXT  
REC MODE  
D. ZOOM  
WI DE  
SP  
50  
x
OFF  
ON  
S
VHS ET  
TAPE LENGTH  
D I SPLAY  
T
30  
If an S-VHS cassette is loaded . . .  
.... rotate MENU to S-VHS, then press it.  
The S-VHS Setting Menu appears.  
FULL  
When an S-VHS  
cassette is  
loaded: S-VHS  
RETURN  
Rotate MENU to set to either of the parameters, then  
press it. The Menu Screen reappears with the  
highlight bar on RETURN.  
4
5
S
VHS ET  
Setting Menu  
ON  
In the S-VHS ET Setting Menu,  
OFF  
ON : Records with S-VHS picture quality on a VHS  
cassette (factory-preset). This is called Super  
VHS ET (Expansion Technology).  
OFF: Records in VHS.  
EX I T  
In the S-VHS Setting Menu,  
ON : Records in S-VHS on an S-VHS cassette  
(factory-preset).  
SYSTEM MENU  
OFF: Records in VHS on an S-VHS cassette.  
NEXT  
REC MODE  
D. ZOOM  
WI DE  
SP  
50  
x
Press MENU to close the Menu Screen.  
When the S-VHS ET mode is engaged, S-ETis  
displayed.  
During S-VHS record mode, Sis displayed.  
When S-VHS ET or S-VHS recording starts, S-VHS  
RECis displayed for approx. 3 seconds.  
OFF  
ON  
S
VHS ET  
TAPE LENGTH  
D I SPLAY  
T
30  
FULL  
RETURN  
NOTE:  
If a cassette is not loaded, S-VHSwill be displayed in the  
Normal Screen  
Menu Screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN11  
NOTES about S-VHS and S-VHS ET  
JVC EHG (Extra High Grade) tapes are recommended for superior results.  
Use S-VHS tape for storing recordings for an extended period or for recording important scenes, as it  
enables higher-quality recording and playback.  
It is recommended to specifically label S-VHS ET recordings so you can easily distinguish them from  
regular VHS recordings.  
With some tapes, better picture quality may not be obtained even with S-VHS ET recording. It is  
recommended that you do test record beforehand to make sure whether better results can be obtained.  
If the S-VHS ET mode or recording format is switched during recording, the playback picture will be  
blurred at the switching point.  
It is recommended that tapes recorded on this camcorder be played back on this camcorder.  
Tapes recorded in S-VHS or S-VHS ET mode can be played back not only on this camcorder but also on  
a Super VHS VCR.  
Tapes recorded in S-VHS ET mode cannot be played back on some VCRs, including some JVC VCRs.  
Tapes recorded in S-VHS or S-VHS ET mode cannot be played back correctly on a normal VHS VCR.  
S-VHS ET does not work with S-VHS tapes.  
To avoid on-screen noise, do not perform Still Playback or Shuttle Search repeatedly.  
If the picture contains a lot of jitter or noise, use a cleaning cassette.  
Compatibility Between S-VHS And VHS  
Recording  
Playback  
Blank tape  
Camcorder  
Recorded tape  
Cassette adapter  
S-VHS VCR  
S-VHS-C  
cassette  
S-VHS  
recordings  
The recorded format (S-VHS or  
VHS) is automatically detected  
when playback begins.  
S-VHS ET  
recordings  
Regular VHS VCR  
VHS-C  
cassette  
VHS  
recordings  
S-VHS recorded tapes cannot be  
viewed on regular VHS VCRs.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED (cont.)  
12EN  
MENU Wheel  
Recording Mode Setting  
Set the tape recording mode depending on your preference.  
Set the Power Switch to “ ”. The power lamp  
1
2
3
4
comes on.  
Press MENU. The Menu Screen appears.  
Rotate MENU to select TO SYSTEM MENUand  
press it to display SYSTEM MENU.  
Power Switch  
Display  
Rotate MENU to select REC MODEand press it.  
The REC MODE Menu appears. Select SPor LP”  
by rotating MENU and press it. The Menu Screen  
reappears with the highlight bar on RETURN.  
Press MENU to close the Menu Screen.  
REC MODE  
REC MODE Menu  
SP  
LP  
•“LP(Long Play) is more economical, providing  
twice the recording time.  
NOTE:  
If the recording mode is switched during recording, the  
playback picture will be blurred at the switching point.  
EX I T  
SP  
Recording mode  
indicator  
Tape Length Setting  
Set the tape length according to the length of the tape  
used.  
Display  
TAPE LENGTH  
TAPE LENGTH  
Menu  
Perform steps 1 through 3 above.  
1
2
3
T
T
T
T
30  
45  
50  
60  
Rotate MENU to select TAPE LENGTH, then press  
it. The TAPE LENGTH Menu appears.  
Rotate MENU to select the correct tape length setting.  
T30=30 minutes  
EX I T  
T45=45 minutes  
T50=50 minutes  
T
30  
Tape length  
indicator  
T60=60 minutes  
Press MENU. The Menu Screen reappears with the  
highlight bar on RETURN. Press MENU to close  
the Menu Screen.  
4
NOTE:  
The tape remaining time (pg. 14) is correct only if the  
correct tape length has been selected.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN13  
EJECT Switch  
Cassette holder  
Loading/Unloading A Cassette  
Open the LCD monitor fully.  
1
Slide EJECT until the cassette holder opens. Do not  
2
3
4
5
use force to open.  
Insert or remove a cassette. When inserting, make  
sure the label is facing outward.  
Press the Close button to close the cassette holder  
until it locks into place.  
Close Button  
Close the LCD monitor.  
NOTES:  
Closing the LCD monitor while the cassette holder is still  
open may cause damage to the LCD monitor.  
The cassette holder cant be opened unless a power  
supply is attached.  
Turn to take  
up slack.  
Make sure that the tape is not slack when loading the  
cassette. If there is any slack, turn the gear on the  
cassette in the direction of the arrow to take up the  
slack.  
Erase Protection tab  
Gear  
Make sure the Erase Protection tab is in the position that  
allows recording. If not, slide the tab. Some cassettes  
have removable tabs. If the tab has been removed, cover  
the hole with adhesive tape.  
The cassette holder cannot be opened while the  
camcorder is in the record mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Basic Recording  
14EN  
NOTE:  
You should already have performed the procedures listed  
below. If not, do so before continuing.  
Power (pg. 6)  
Load A Cassette (pg. 13)  
Recording Mode Setting (pg. 12)  
Tape Length Setting (pg. 12)  
Grip Adjustment (pg. 8)  
Viewfinder Adjustment (pg. 8)  
Shooting While Watching The Viewfinder  
During shooting  
Make sure the LCD monitor is closed and locked.  
Power Switch  
1
Press in the tabs on the lens cap to remove it. Set the  
Power Switch to “ ” or “ ”. The power lamp  
lights and the camcorder enters the Record-Standby  
mode. PAUSEis displayed in the viewfinder.  
Recording Start/Stop Button  
25M I N  
Tape remaining  
time indicator  
(Approximate)  
Press the Recording Start/Stop Button. “  
appears  
2
in the viewfinder while recording is in progress.  
To Stop Recording . . .  
.... press the Recording Start/Stop Button. The camcorder  
re-enters the Record-Standby mode.  
MIN  
60MIN  
59MIN  
(Now calculating)  
0MIN  
(Blinking)  
1MIN  
(Blinking)  
2MIN  
(Blinking)  
3MIN  
Shooting While Watching The  
LCD Monitor  
BRIGHT Wheel  
Make sure the LCD monitor is fully open. Press in the  
1
tabs on the lens cap to remove it. Set the Power  
Switch to “ ” or “ ”. The powerlamp lights and  
the camcorder enters the Record-Standby mode.  
PAUSEis displayed in the LCD monitor.  
90°  
180°  
Tilt the LCD monitor upward/downward for best  
2
viewability and press the Recording Start/Stop Button.  
appears in the LCD monitor while recording is  
in progress.  
– – – – – – – – – –  
6
+
BR I GHT  
NOTE:  
When you use the LCD monitor outdoors in direct  
sunlight, the LCD monitor may be difficult to see. If this  
happens, use the viewfinder instead.  
To Adjust The Brightness Of The LCD Monitor  
.... rotate BRIGHT until the bright level  
indicator on the display moves and the  
appropriate brightness is reached.  
To Stop Recording . . .  
.... press the Recording Start/Stop Button. The camcorder  
re-enters the Record-Standby mode.  
Power Switch Position  
: Suitable for standard recording using NO special effects or manual adjustments.  
: Allows you to set recording functions using the menus for more creative capabilities.  
OFF : Switches off the camcorder.  
: Allows you to play back your recordings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN15  
NOTES:  
If the Record-Standby mode continues for 5 minutes without performing Zoom or any other operations, the  
camcorders power shuts off automatically. Set the Power Switch to OFF, and then back to “ ” or “ ” to  
turn the camcorder on again.  
If you are recording on a cassette from the middle (such as when a tape is removed and re-inserted during  
recording), use the Retake function (pg. 17) to find the end of the last recording so you do not erase any  
of it.  
To remove the indications from the camcorders display during recording, pg. 22, 24.  
Self-Recording  
JOURNALISTIC SHOOTING  
SELF-RECORDING  
In some situations, different shooting angles may  
provide more dramatic results. Hold the camcorder in  
the desired position and tilt the LCD monitor in the  
most convenient direction. It can rotate 270° (90°  
downward, 180° upward).  
You can shoot yourself while viewing your own  
image in the LCD monitor. Open the LCD monitor  
and tilt it upward 180° so that it faces forward, then  
point the lens toward yourself and start recording.  
For other notes, pg. 44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Basic Features  
16EN  
Zooming: To produce the zoom in/out effect, or an  
instantaneous change in image magnification.  
Digital circuitry extends the maximum magnification offered  
by optical zoom. This system is called Digital Zoom.  
Zoom In  
Zoom in (T: Telephoto)  
Slide the Power Zoom Lever towards T.  
Zoom Out  
Slide the Power Zoom Lever towards W.  
The further you slide the Power Zoom Lever, the quicker  
the zoom action.  
Zoom out (W: Wide angle)  
Focusing may become unstable during Zooming. In  
this case, set the zoom while in RecordStandby, lock  
the focus by using the manual focus (pg. 28), then  
zoom in or out in Record mode.  
The zoom level indicator (5) moves during zoom.  
Once the zoom level indicator reaches the top of the  
zoom indicator bar, all magnification from that point is  
through digital processing.  
RETAKE (2/3) Button  
LIGHT  
OFF/AUTO/ON  
Switch  
When using Digital Zoom, the quality of image may  
suffer. To deactivate Digital Zoom, set D.ZOOMto  
OFFin SYSTEM MENU (pg. 23).  
Digital zoom cannot be used when the VIDEO  
ECHOmode (pg. 21) is activated.  
Power Zoom Lever  
P. STABILIZER  
Button  
Picture Stabiliser: To compensate for unstable  
images caused by camera-shake, particularly at high  
magnification.  
1) Press P. STABILIZER. “ ” appears.  
2) To switch off the Picture Stabiliser, press  
P. STABILIZER. The indicator disappears.  
Accurate stabilisation may not be possible if hand shake  
is excessive, or under the following conditions:  
When shooting subjects with vertical or horizontal  
stripes.  
When shooting dark or dim subjects.  
When shooting subjects with excessive backlighting.  
When shooting scenes with movement in various  
directions.  
Display  
Zoom indicator  
bar  
1
x
Zoom level  
indicator  
Approximate  
zoom ratio  
When shooting scenes with low-contrast backgrounds.  
Switch off the Picture Stabiliser when recording with  
the camcorder on a tripod.  
Picture Stabiliser indicator  
The “  
indicator appears blinking if the Stabiliser  
cannot be used.  
This function cannot be activated during the  
Night-Scope(pg. 18), CLASSIC FILM,  
STROBEand VIDEO ECHOmode (pg. 21).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN17  
Video Light (GR-SXM607 only): To  
Quick Review: To check the end of the last  
recording.  
brighten the scene when natural lighting is too dim.  
1) Make sure the camcorder is in the RecordStandby  
1) Set LIGHT OFF/AUTO/ON as required:  
OFF : Turns off the light.  
AUTO : Automatically turns on the light when the  
camcorder senses insufficient lighting on  
the subject.  
mode.  
2) Press  
2
and release quickly.  
Tape is rewound for approx. 1 second and played  
back automatically, then pauses in Record–  
Standby mode for the next shot.  
ON  
: Always keeps the light on as long as the  
camcorder is turned on.  
Distortion may occur at the start of playback. This  
is normal.  
The video light can only be used with the  
camcorders power on.  
It is recommended to set the white balance  
Retake: To re-record certain segments.  
1) Make sure the camcorder is in the RecordStandby  
mode.  
(pg. 29) to  
when you use the video light.  
When not using the video light, turn it off to save  
2) Press and hold either RETAKE to reach the start  
battery power.  
Even if the battery indicator (  
point for new recording. Pressing  
tape and pressing reverses it.  
3
forwards the  
) does not blink  
2
if the battery packs charge is low, the camcorder  
may turn off automatically when you turn on the  
video light, or when you start recording with the  
video light turned on.  
When LIGHT OFF/AUTO/ON is set to AUTO:  
Depending on the lighting conditions, the video  
light may keep turning on and off. In this case,  
manually switch the light on or off using LIGHT  
OFF/AUTO/ON.  
3) Press the Recording Start/Stop Button to start  
recording.  
Noise bars appear and pictures may become  
monochrome or darken during Retake. This is  
normal.  
While the Sportsor High Speed Shutter”  
mode (pg. 20) is engaged, the light is likely  
to stay on.  
While the Twilightmode (pg. 20) is  
engaged, the light will not activate.  
DANGER  
The video light can become extremely hot. Do  
not touch it either while in operation or soon  
after turning it off, otherwise serious injury may  
result.  
Do not place the camcorder into the carrying  
case immediately after using the video light,  
since it remains extremely hot for some time.  
When operating, keep a distance of about 30  
cm between the video light and people or  
objects.  
Do not use near flammable or explosive  
materials.  
It is recommended that you consult your  
nearest JVC dealer for replacing the video  
light.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features  
18EN  
SNAPSHOT Button  
Snapshot  
Use your camcorder like a regular camera and take a  
snapshot, or several of them in succession.  
Set the Power Switch to “ ” or “ ”.  
1
Press SNAPSHOT.  
2 If you press during Record-Standby . . .  
.... a still image will be recorded for approx.  
6 seconds, then the camcorder re-enters the  
Record-Standby mode.  
Power Switch  
If you press during Recording . . .  
NOTES:  
.... a still image will be recorded for approx.  
6 seconds, then the normal recording resumes.  
After SNAPSHOT is pressed, there is a  
momentary camera shutter-type blackout  
together with the sound effect of a shutter  
closing, which is recorded together with the  
image.  
Snapshot is available during playback as  
well. However, the shutter sound is not  
heard.  
Night-Scope  
Makes dark subjects or areas even brighter than they  
would be under good natural lighting. Although the  
recorded image is not grainy, it may look as if it is strobing  
due to the slow shutter speed.  
NIGHT-SCOPE Button  
Set the Power Switch to “ ” or “ ”.  
1
2
Press NIGHT-SCOPE repeatedly until the desired  
modes name and indication appear.  
They are displayed for approx. 2 seconds, then the  
name disappears so that only the indication remains.  
The mode is activated.  
To cancel the effect, press NIGHT-SCOPE repeatedly  
until OFFappears. OFFis displayed for approx.  
2 seconds.  
3
A NIGHT AUTO  
The shutter speed is automatically adjusted  
(maximum 1/5 sec.).  
Power Switch  
NOTES:  
During Night-Scope, the following functions  
or settings cannot be activated:  
Picture Stabilizer(pg. 16), Program  
AE With Special Effects(pg. 20) and  
Digital Effects(pg. 21).  
GAINor S.LXin CAMERA MENU  
(pg. 23).  
Night-Scope does not work when LIGHT  
OFF/AUTO/ON is set to AUTOor ON”  
(pg. 17).  
During Night-Scope, it may be difficult to  
bring the camcorder into focus. To prevent  
this, use of a tripod is recommended.  
1 NIGHT 10X*  
The shutter speed is set to 1/5th of a second to provide  
10 times the sensitivity.  
2 NIGHT 50X* (GR-SXM55 only)  
The shutter speed is set to 1 second to provide 50 times  
the sensitivity.  
2 NIGHT 25X* (GR-SXM607 only)  
The shutter speed is set to half of a second to provide  
25 times the sensitivity.  
*Appears when the Power Switch is set to “ ”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN19  
FADE/WIPE Button  
Fade/Wipe Effects  
These effects let you make pro-style scene transitions.  
Fade- or wipe-in works at recording start, and fade- or  
wipe-out works at recording end.  
Set the Power Switch to “ ”.  
1
Press FADE/WIPE repeatedly until the desired modes  
2
name and indication appear.  
They are displayed for approx  
name disappears so that only the indication remains.  
The effect is reserved.  
3
. 2 seconds, then the  
Press the Recording Start/Stop Button to activate fade-  
in/out or wipe-in/out.  
3
4
To cancel a fade or wipe, press FADE/WIPE  
repeatedly until OFFappears.  
OFFis displayed for approx. 2 seconds and the  
fade/wipe standby mode is cancelled.  
Power Switch  
Recording Start/Stop Button  
FADER  
Fades in/out to a black screen.  
MOSAIC (Fader)  
Gradually turns/returns the picture into/from a mosaic  
pattern.  
SHUTTER (Wipe)  
A black screen moves in from the top and bottom, closing  
over the image like a shutter, or a new image pushes open  
the black screen vertically from the centre.  
SLIDE (Wipe)  
A black screen moves in from the left to gradually cover  
the image, or a new image moves in from right to left.  
DOOR (Wipe)  
Wipes in as the two halves of a black screen open to the  
left and right, revealing the scene, or wipes out and the  
black screen reappears from left and right to cover the  
scene.  
CORNER (Wipe)  
Wipes in on a black screen from the upper right to the  
lower left corner, revealing the scene, or wipes out from  
lower left to upper right, leaving a black screen.  
NOTE:  
WINDOW (Wipe)  
Wipes in on a black screen from the centre of the screen  
towards the corners, revealing the scene, or wipe out from  
the corners to the centre, leaving a black screen.  
Pressing and holding the Recording Start/Stop  
Button allows you to vary the length for the  
image during fade in/out or wipe in/out.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
20EN  
P.AE Button  
Program AE With Special Effects  
Set the Power Switch to “ ”.  
1
2
Press P.AE repeatedly until the desired modes name  
and indication appear.  
They are displayed for approx. 2 seconds, then the  
name disappears so that only the indication remains.  
The mode is activated.  
To cancel the effect, press P.AE repeatedly until OFF”  
appears. OFFis displayed for approx. 2 seconds.  
3
Power Switch  
SPORTS  
High shutter speed clearly captures fast-moving action.  
ND : ND EFFECT  
A black mist darkens the picture, as when an ND filter is  
used. Helps to counter the effects of glare on the subject.  
FG : FOG  
Makes the picture look misty white, as when an external  
fog filter is attached to the lens. Softens the image and  
NOTES:  
gives it a fantasylook.  
Only one mode can be engaged at a time.  
The screen becomes slightly dark in the High  
Speed Shutter mode. Use in well-lit situa-  
tions.  
In the High Speed Shutteror Sports”  
modes, picture colour may be adversely  
affected if the subject is lit by alternating  
discharge-type light sources such as  
flourescent or mercury-vapour lights.  
This function cannot be activated during  
Night-Scope (pg. 18).  
TWILIGHT  
Dusk, twilight scenery, fireworks, etc., look more natural  
and dramatic. The following happens when Twilight  
mode is selected:  
Auto gain control is turned off.  
White Balance is set to :FINE(day mode), but can  
also be manually changed to another mode (pg. 29).  
Auto Focus becomes available only in the range of  
10 m to infinity. To focus when the subject-to-camera  
distance is less than 10 m, use manual focusing  
(pg. 28).  
The FOGmode cannot be used when the  
VIDEO ECHOmode (pg. 21) is  
activated.  
S1/2000  
(1/2000 sec. High Speed Shutter)  
Captures faster action than Sports mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN21  
DIGIFECT Button  
Digital Effects  
Set the Power Switch to “ ”.  
1
2
Press DIGIFECT repeatedly until the desired modes  
name and indication appear.  
They are displayed for approx. 2 seconds, then the  
name disappears so that only the indication remains.  
The mode is activated.  
To cancel the effect, press DIGIFECT repeatedly until  
OFFappears. OFFis displayed for approx.  
2 seconds.  
3
Power Switch  
SEPIA  
Recorded scenes have a brownish tint like old photos.  
Combine this with the WIDE mode (pg. 22, 23) for a  
classic look.  
MONOTONE  
Like black and white films, your footage is shot in B/W.  
Combine this with the WIDE mode (pg. 22, 23) for a  
classic look.  
NEGA POSI  
The colours of a picture are reversed.  
MOSAIC  
Turns recorded scenes into a mosaic pattern.  
STRETCH  
Doubles the width of the picture horizontally.  
CLASSIC FILM  
Makes your footage look like a classic movie by  
shooting in black and white, with a strobing effect, and  
black bars added at the top and bottom.  
NOTES:  
Digital Effects can be changed during  
recording or during Record-Standby.  
Digital zoom (pg. 16) cannot be used  
when the VIDEO ECHOmode is activated.  
This function cannot be activated during the  
Night-Scope(pg. 18), CLASSIC FILM,  
STROBEand VIDEO ECHOmode.  
STROBE  
Your recording looks like a series of consecutive  
snapshots.  
VIDEO ECHO  
Adds a ghostto the subject, giving your recording a  
fantasyfeeling. Zoom magnification of over 10X is not  
available.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
22EN  
Using Menus For Detailed Adjustment  
This camcorder is equipped with an easy-to-use,  
on-screen menu system that simplifies many of the more  
detailed camcorder settings.  
Set the Power Switch to “ ”.  
MENU Wheel  
1
Press MENU. The Menu Screen appears.  
2
Power Switch  
Rotate MENU to select the desired function.  
3
To go from CAMERA MENU to SYSTEM MENU,  
rotate MENU to select TO SYSTEM MENUand  
press it. SYSTEM MENU is composed of 2 pages. To  
go to the next page, rotate MENU to select  
Display  
CAMERA MENU  
Menu Screen  
TO SYSTEM MENU  
FOCUS  
EXPOSURE  
AUTO  
AUTO  
NEXTand press it.  
To return to CAMERA MENU from page 2 of  
SYSTEM MENU, rotate MENU to select TO  
CAMERA MENUand press it.  
SYSTEM MENU  
NEXT  
REC MODE  
D. ZOOM  
WI DE  
SP  
50  
x
Press MENU to display the Setting Menu and rotate it  
to select the desired setting.  
OFF  
ON  
4
S
VHS  
TAPE LENGTH  
D I SPLAY  
T
30  
If you select JLIP ID NO.. . .  
FULL  
.... Press MENU. The number blinks. Rotate MENU  
until the desired number appears, and press it.  
Then rotate MENU to EXIT.  
RETURN  
Press MENU. The Menu Screen reappears with the  
highlight bar on RETURN.  
REC MODE  
5
6
Setting Menu  
(ex. REC MODE)  
SP  
LP  
Press MENU. The normal screen reappears.  
EX I T  
SYSTEM MENU  
NEXT  
REC MODE  
D. ZOOM  
WI DE  
LP  
50  
x
OFF  
ON  
S
VHS  
TAPE LENGTH  
D I SPLAY  
T
30  
FULL  
RETURN  
Normal Screen  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN23  
MENU SCREEN EXPLANATIONS  
CAMERA MENU  
Refer to Focusing(pg. 28).  
FOCUS  
Refer to Exposure Control(pg. 27).  
EXPOSURE  
M.W.B.  
Refer to White Balance Adjustmentand Manual White Balance Operation”  
(pg. 29).  
NORMAL  
To record a subject in a dimly lit environment, when it is more  
convenient to shoot with a less coarse picture although the  
subject becomes slightly dark.  
GAIN  
(GR-SXM607  
only)  
OFF  
Allows you to shoot dark scenes with no picture brightness  
adjustment.  
MAX  
To record a subject in a darkly lit environment, when it is more  
convenient to shoot the subject with a brighter image even if the  
picture becomes slightly coarse.  
S.LX  
(GR-SXM55  
only)  
NORMAL  
OFF  
To record a subject in a dimly lit environment, when it is more  
convenient to shoot with a less coarse picture although the  
subject becomes slightly dark.  
Allows you to shoot dark scenes with no picture brightness  
adjustment.  
TITLE  
Allows you to superimpose one of eight preset titles (pg. 25).  
Makes the date/time settings appear in the camcorder or on a connected monitor  
(pg. 25).  
DATE/TIME  
DISP.  
SYSTEM MENU  
This Menu Screen cannot be accessed while recording.  
Allows you to set the recording mode (SP or LP) depending on your preference  
REC MODE  
D. ZOOM  
(pg. 12).  
50X  
Allows you to use the Digital Zoom. By digitally processing and  
magnifying images, zooming is possible from 16X (the optical  
zoom limit), to a maximum of 50X digital magnification.  
400X  
OFF  
Allows you to use the Digital Zoom. By digitally processing and  
magnifying images, zooming is possible from 16X (the optical  
zoom limit), to a maximum of 400X digital magnification.  
Digital Zoom is not available. Only optical zoom (maximum  
16x magnification) can function. When set to OFFduring  
Digital Zoom, zoom magnification changes to 16X.  
WIDE  
OFF  
ON  
Does not display black bars.  
Allows you to record black bars at the top and bottom of the screen  
to produce a cinema-like wide-screeneffect. If a snapshot  
(pg. 18) is taken while the camcorder is in the WIDE mode,  
the snapshot image is recorded without the black bars at the top  
and bottom of the screen.  
: Factory-preset  
CONTINUED ON NEXT PAGE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
24EN  
SYSTEM MENU (cont.)  
S-VHS*  
(S-VHS ET*)  
ON  
Records in S-VHS on a VHS or S-VHS cassette (pg. 10).  
Records in VHS on a VHS or S-VHS cassette (pg. 10).  
OFF  
TAPE LENGTH  
DISPLAY  
Allows you to set the tape length depending on the tape used (pg. 12).  
FULL  
Make all of the indications appear on the LCD monitor/  
viewfinder during playback or recording.  
SIMPLE  
Make the following indications disappear from the the LCD  
monitor/viewfinder during recording or playback: cassette  
warning, tape remaining time, battery pack remaining power  
indicator and tape length indicator (pg. 52, 53)  
Refer to Animationand Time-Lapse(pg. 26).  
Refer to Time-Lapse(pg. 26).  
REC TIME  
INT. TIME  
TELE MACRO  
OFF  
ON  
Usually the distance to a subject where the lens is in focus  
depends on the zoom magnification. Unless there is a distance of  
more than 1 m to the subject, the lens is out of focus at the  
maximum telephoto setting. When set to ON, you can shoot a  
subject as large as possible at a distance of approx. 60 cm.  
Depending on the zoom position, the lens may go out of focus.  
TITLE LANG.  
Allows you to select the language (ENGLISH or FRENCH) of Instant Titles  
(pg. 25).  
DATE/TIME  
JLIP ID NO.  
Allows you to set the current date and time (pg. 9).  
This number is necessary when connecting the camcorder to a device such as a computer  
using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.  
DEMO MODE  
ON  
Demonstrates certain functions automatically. When DEMO  
MODEis set to ONand the Menu Screen is closed, the  
demonstration starts.  
Operating the Power Zoom Lever during the demonstration  
stops the demonstration temporarily. If the Power Zoom Lever is  
not moved for more than 1 minute after that, the demonstration  
will resume.  
NOTE:  
When a tape whose Erase Protection tab is in the position that  
allows recording is loaded in the camcorder, demonstration is  
not available.  
OFF  
Automatic demonstration will not take place.  
*S-VHS ET is displayed when a VHS cassette is loaded, and S-VHS is displayed when an S-VHS cassette is  
loaded (pg. 10). If a cassette is not loaded, S-VHSwill be displayed in the Menu Screen.  
S-VHS ET is preset to OFF.  
: Factory-preset  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN25  
Date/Time Insert  
Set the Power Switch to “ ”.  
1
2
3
4
5
Allows you to display the date and time in the  
camcorder or on a connected colour monitor,  
as well as to record them manually or  
automatically.  
Press MENU. The Menu Screen appears.  
You should have already performed the Date/  
Time Setting procedure (pg. 9).  
Rotate MENU to select DATE/TIME DISP.and press  
it. The DATE/TIME DISP. Menu appears.  
Rotate MENU to select the desired mode, then press  
it. The desired mode is activated.  
The Menu Screen reappears with the highlight bar on  
RETURN. Press MENU to close the Menu Screen.  
MENU Wheel  
NOTES:  
DISPLAY  
The selected display can be recorded.  
If you do not want to record the display, select the OFF  
mode before shooting.  
Power Switch  
AUTO DATE  
Your camcorder automatically records the date for about  
5 seconds after recording is initiated in the following  
situations:  
25. 12. 01  
After changing the date.  
AUTO DATE  
After loading a cassette.  
After Auto Date Record mode is selected by rotating  
MENU.  
In this mode, the date is replaced after 5 seconds with  
AUTO DATEbut this is not recorded.  
25. 12. 01  
(DATE)  
22 : 25 : 00  
(TIME)  
25. 12. 01  
22 : 25 : 00  
(DATE/TIME)  
No indication  
(OFF)  
Instant Titles  
Set the Power Switch to “ ”.  
1
2
3
4
5
The camcorder has eight preset titles in  
memory. You can superimpose one of them  
over the video image.  
Press MENU. The Menu Screen appears.  
Instant Titles can be displayed not only in  
English but also in French. Change the setting in  
TITLE LANG. in SYSTEM MENU. (pg. 24).  
Rotate MENU to select TITLEand press it. The  
TITLE Menu appears.  
T I TLE  
OFF  
Rotate MENU to select the desired mode, then press  
it. The desired mode is activated.  
HAPPY B I RTHDAY  
HAPPY HOL I DAYS  
OUR FAM I LY  
MOV I E STAR  
PARTY T I ME  
MERRY CHR I STMAS  
WEDD I NG DAY  
CONGRATULAT I ONS  
EX I T  
The Menu Screen reappears with the highlight bar on  
RETURN. Press MENU to close the Menu Screen.  
NOTE:  
The selected title will remain until OFF is selected in the  
TITLE Menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
26EN  
NOTE:  
Animation  
Before performing the following steps, make  
sure that:  
You can shoot a series of pictures, each slightly different,  
of the same object for a brief period of time.  
The Power Switch is set to “ ”.  
The camcorder is in the Record-Standby  
mode.  
Press MENU. The Menu Screen appears.  
1
2
The recording mode is set to SP.  
Rotate MENU to select TO SYSTEM MENUand  
press it to display SYSTEM MENU. Rotate MENU to  
select NEXTand press it to display the next page.  
Then, rotate MENU to select REC TIMEand press it.  
The REC TIME Menu appears. Rotate MENU to select  
the desired recording time, then press it.  
The Menu Screen reappears with the highlight bar on  
3
4
RETURN. Press MENU again to close the Menu  
MENU Wheel  
Screen.  
Press the Recording Start/Stop Button after focusing  
on the subject. The recording stops automatically  
after the selected period of time.  
Recording Start/Stop Button  
Display  
Repeat step 4 for the desired number of pictures.  
To release the Animation mode, set REC TIMEin  
the Menu screen to OFF.  
REC T I ME  
REC TIME Menu  
5
OFF  
1
1
1
5
/
/
4
2
S
S
S
S
Time-Lapse  
You can record sequentially at preset time spans. Leaving  
the camcorder aimed at a specific subject, you can record  
subtle changes over an extended period of time.  
I NT. T I ME  
INT. TIME Menu  
OFF  
15  
S
S
30  
1
5
M I N  
M I N  
Set REC TIME(step 1 and 2 of Animation”  
above).  
1
2
Rotate MENU to select INT. TIMEand press it. The  
INT. TIME Menu appears. Rotate MENU to select the  
desired interval time, then press it. The Menu Screen  
reappears with the highlight bar on RETURN.  
Press MENU again to close the Menu Screen.  
Interval time  
indicator  
15  
S
1
S
Press the Recording Start/Stop Button. Recording and  
Recording time  
indicator  
intervals alternate automatically.  
3
4
To release the Time-Lapse mode, when “  
is not  
, then set REC TIMEand  
displayed, press the Recording Start/Stop Button to  
display “  
INT. TIMEin the Menu Screen to OFF.  
NOTES (for Animation and Time-Lapse):  
For best results, make sure the camcorder is secured when shooting in Animation or Time-Lapse mode.  
Fade- or wipe-in/out cannot be performed during Animation or Time-Lapse shooting.  
Before performing other operations following Animation or Time-Lapse recording, make sure the Animation  
or Time-Lapse mode is deactivated.  
Animation and Time-Lapse are canceled when the power is shut off or when the cassette is ejected.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN27  
Exposure Control  
This feature automatically adjusts the iris for the best  
available picture quality, but you can override it and make  
the adjustment manually. Manual exposure adjustment is  
recommended in the following situations:  
When shooting using reverse lighting or when the  
background is too bright.  
MENU Wheel  
When shooting on a reflective natural background such  
as at the beach or when skiing.  
When the background is overly dark or the subject light.  
Power Switch  
Set the Power Switch to “ ”.  
1
Manual Exposure  
Screen  
Press MENU. The Menu Screen appears.  
2
3
4
00  
Rotate MENU to select EXPOSUREand press it. The  
EXPOSURE Menu appears.  
Exposure  
control  
level counter  
Rotate MENU to select MANU, then press it. The  
Menu Screen disappears and 00(exposure control  
level counter) appears.  
To brighten the image  
To brighten the image, rotate MENU downward. The  
exposure control level counter increases (maximum  
+06).  
To darken the image, rotate MENU upward. The  
exposure control level counter decreases (maximum  
06).  
5
+
06  
06  
Press MENU. The setting is complete. The Menu  
To darken the image  
6
7
Screen reappears with the highlight bar on  
RETURN.  
Press MENU. The Menu Screen disappears and the  
exposure control level counter reappers to indicate  
the exposure is adjusted.  
NOTES:  
To return to the factory setting, select AUTOin step 4.  
To re-adjust exposure, repeat the procedure from step 2.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING Advanced Features (cont.)  
28EN  
Focus detection zone  
Focusing  
AUTO FOCUS  
The camcorders Full Range AF system offers continuous  
shooting ability from close-up to infinity. However, correct  
focus may not be obtainable in the situations listed below  
(in these cases use manual focusing):  
When two subjects overlap in the same scene.  
When illumination is low.*  
When the subject has no contrast (difference in bright-  
ness and darkness), such as a flat, one-colour wall, or a  
clear, blue sky.*  
When a dark object is barely visible in the viewfinder.*  
When the scene contains minute patterns or identical  
patterns that are regularly repeated.  
When the scene is affected by sunbeams or light  
reflecting off the surface of a body of water.  
When shooting a scene with a high-contrast background.  
NOTES:  
If the lens is smeared or blurred, accurate  
focusing is not possible. Keep the lens clean,  
wiping with a piece of soft cloth if it gets  
dirty. When condensation occurs, wipe with  
a soft cloth or wait for it to dry naturally.  
When shooting a subject close to the lens,  
zoom out first (pg. 16). If zoomed in in  
the auto focus mode, the camcorder could  
automatically zoom out depending on the  
distance between the camcorder and the  
subject. This does not occur with TELE  
MACRO(pg. 24).  
* The low-contrast warning “  
appears.  
MANUAL FOCUS  
Make the necessary viewfinder adjustments to use the  
viewfinder (pg. 8).  
Set the Power Switch to “ ”.  
1
Press MENU. The Menu Screen appears.  
2
3
4
MENU Wheel  
Rotate MENU to select FOCUSand press it. The  
FOCUS Menu appears.  
Rotate MENU to select MANU, then press it. The  
Menu Screen disappears and “ ” and “ ” appear.  
The focus is locked at this point.  
Power Switch  
To focus on a farther subject, rotate MENU upward.  
5
appears and blinks.  
To focus on a nearer subject, rotate MENU  
downward. “ ” appears and blinks.  
Press MENU. The setting is complete. The Menu  
6
7
Screen reappears with the highlight bar on  
RETURN.  
Press MENU. The Menu Screen disappears and  
reappears to indicate the focus is locked.  
NOTES:  
To return to Auto Focus, select AUTOin step 4.  
To re-adjust Manual Focus, repeat the procedure from step 2.  
Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If you  
focus in on a certain subject in the wide-angle position, sharply focused images cannot be obtained when  
zoomed in because the depth-of-field is reduced at longer focal lengths.  
When the focus level cannot be adjusted any farther or closer, “ ” or “ ” will blink.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN29  
White Balance Adjustment  
Manual White Balance Operation  
A term that refers to the correctness of colour  
reproduction under various lighting. If the white  
balance is correct, all other colors will be accurately  
reproduced.  
Perform Manual White Balance when shooting under  
various types of lighting.  
Follow steps 1 through 4 of the white balance  
1
2
adjustment, and select MWB.  
The white balance is usually adjusted automatically.  
However, more advanced camcorder operators  
control this function manually to achieve a more  
professional colour/tint reproduction.  
Hold a sheet of plain white paper in front of the  
subject. Adjust zoom or position yourself so that  
the white paper fills the screen.  
Set the Power Switch to “ ”.  
Press MENU until MWBbegins blinking.  
When the setting is completed, MWBstops  
blinking, and the Menu Screen reappears with  
the highlight bar on RETURN.  
1
3
4
Press MENU. The Menu Screen appears.  
2
3
Press MENU again to close the Menu Screen.  
Rotate MENU to select M.W.B., then press it.  
The M.W.B. Menu appears.  
Rotate MENU to select the desired setting.  
4 AUTO”  
MENU Wheel  
White balance is adjusted automatically (factory  
preset).  
: FINE”  
Outdoors on a sunny day.  
: CLOUD”  
Outdoors on a cloudy day.  
: HALOGEN”  
White paper  
A video light or similar type of lighting is used.  
MWB”  
White balance is set manually.  
Power Switch  
Press MENU. The Menu Screen reappears with  
the highlight bar on RETURN. Press MENU  
again to close the Menu Screen.  
5
To Change The Tint For Recording . . .  
.... in step 2, substitute coloured paper for white.  
The white balance is adjusted based on the  
colour, changing the tint. Red paper = deeper  
green; blue paper = orange; yellow paper =  
deeper purple.  
To Return To Automatic White Balance . . .  
.... select AUTOin step 4. Or set the Power  
Switch to “ ”.  
NOTE:  
White balance cannot be used when the SEPIAor  
MONOTONEmode (pg. 21) is activated.  
NOTES:  
In step 2, it may be difficult to focus on the white  
paper. In such a case, adjust focus manually  
(pg. 28).  
A subject can be shot under various types of  
lighting conditions indoors (natural, flourescent,  
candlelight, etc.). Because the colour temperature  
is different depending on the light source, the  
subject tint will differ depending on the white  
balance settings. Use this function for a more  
natural result.  
Once you adjust white balance manually, the  
setting is retained even if the power is turned off or  
the battery removed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Basic Playback  
30EN  
Load a tape (pg. 13).  
1
2
Set the Power Switch to “  
To start playback, press 4/6.  
To stop playback, press 5.  
”.  
Stop (5) Button  
•Press  
2
to rewind, or  
3
to fast-forward the tape  
Rewind (2) Button  
during Stop mode.  
Play/Pause (4/6) Button  
NOTES:  
Fast-Forward (3) Button  
BRIGHT Wheel  
The camcorder shuts off automatically after about  
5 minutes in Stop mode. To turn on again, set the Power  
Switch to OFF, then to “  
When the Power Switch is set to “  
.  
and the LCD  
monitor is opened at an angle of 60 degrees or more, the  
LCD monitor switches on and the viewfinder switches  
off automatically to save power.  
Power Zoom  
Lever (VOL.)  
The playback picture can be viewed in the viewfinder  
(with the LCD monitor shut), on the LCD monitor or on  
a connected TV (pg. 32, 33).  
You can also view the playback picture on the LCD  
monitor with it flipped over and retracted.  
If a blank portion on the tape is played back, the screen  
may become black. This is not a malfunction.  
Speaker  
”.  
Set to “  
LCD Monitor Brightness Adjustment: Rotate BRIGHT towards +to brighten, or towards ”  
to darken.  
The Bright Level Indicator is displayed under the Date/Time Display when you play back images recorded in  
Wide Mode (pg. 23).  
Speaker Volume Control: Slide the Power Zoom Lever (VOL.) towards +to turn up the volume,  
or towards to turn down the volume.  
The Speaker Volume Indicator is displayed under the Date/Time Display when you play back images  
recorded in Wide Mode (pg. 23).  
Still Playback: Pauses during playback.  
1) Press 4/6 during playback.  
2) To resume normal playback, press 4/6 again.  
Noise bars will appear and the picture will become monochrome during Still Playback.  
If TBC (pg. 31) is engaged, noise bars will not appear. This mode is called Fine Still.  
Shuttle Search: Allows high-speed search in either direction.  
1) Press  
3
for forward or  
2
for reverse search during playback.  
2) To resume normal playback, press 4/6.  
During playback, press and hold or 3. The search continues as long as you hold the button. Once you  
release it, normal playback resumes.  
2
Noise bars appear and pictures may become monochrome or darken during Shuttle Search. This is normal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Features  
EN31  
Tracking: Eliminates noise bars that appear on-screen  
COUNTER R/M Button  
during playback. Factory-preset is Auto Tracking.  
To activate Manual Tracking:  
1) Press TRACKING for approx. 2 seconds. MTappears.  
2) Rotate TRACKING so that the noise bars disappear.  
To return to Auto Tracking, press TRACKING for approx.  
2 seconds or set the Power Switch to OFFand then  
Stop (5) Button  
again. ATblinks. When Auto Tracking finishes,  
Rewind (2) Button  
the indication disappears.  
When noise bars appear during playback, the  
camcorder enters the Auto Tracking mode and ATis  
displayed.  
Manual Tracking may not work with tapes recorded on  
other VCRs or camcorders.  
Play/Pause (4/6) Button  
Fast-Forward (3) Button  
TRACKING  
Wheel  
TBC (Time Base Corrector): Removes jitter from  
fluctuating video signals to deliver a stable picture even  
with old tapes. Factory-preset: TBC is engaged.  
To activate/release the TBC mode, press TBC during  
playback for more than 1 second. When the TBC mode is  
activated, TBCis displayed.  
TBC Button  
Counter Memory Function: Makes it easier to  
locate a specific tape segment.  
1) Press COUNTER R/M and hold for more than 1 second.  
The counter resets to 0:00:00.  
Set to “  
.  
2) Press COUNTER R/M for less than 1 second.  
Mappears.  
3) After recording or playback, press 5, then 2. The tape  
automatically stops at or close to 0:00:00.  
4) Press 4/6 to start playback.  
The counter memory functions in the Fast-Forward and  
Rewind modes.  
To disable the Counter Memory Function, press  
COUNTER R/M for less than 1 second so that M”  
disappears.  
Playback Special Effects (CLASSIC FILM,  
MONOTONE, SEPIA, STROBE and VIDEO  
ECHO, pg. 21): Allows you to add creative  
effects to the playback image.  
1) Activate the TBC mode and Auto Tracking.  
2) Press DIGIFECT repeatedly until the desired modes  
name and indication appear. They are displayed for  
approx. 2 seconds, then the name disappears so that  
only the indication remains. The mode is activated.  
3) To cancel the effect, select OFFin step 2.  
Playback Special Effects do not work during shuttle  
search.  
The selected effect mode cannot be changed during still  
playback.  
For other notes, pg. 44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Connections  
32EN  
Use the provided A/V cable and S-Video cable.  
To TV or VCR  
To S-Video  
To S-Video  
Input  
Output  
TV  
S-Video cable  
A/V cable  
White to  
Audio Input  
White to  
Audio Output  
VCR  
Yellow to  
Video Input  
When the S-Video  
cable is not used.  
Yellow to  
Video Output  
p
[
(
)
Connector cover*  
* When connecting the cables, open this cover.  
If your TV/VCR has a 21-pin connector  
Use the provided Cable Adapter.  
Cable Adapter  
A/V cable  
TV  
or  
VCR  
Camcorder  
When the S-Video cable is  
not used.  
Yellow  
Yellow  
p
[
(
)
S-Video cable  
Y/C/CVBSVideo Out  
Select Switch  
NOTES:  
Set the video out select switch of the cable adapter as required:  
Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.  
CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an A/V cable.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN33  
Basic Connections  
Tape Dubbing  
Make sure all units are turned off.  
Following the illustration on pg. 32, connect the  
camcorder and the VCR.  
1
2
1
2
Connect the camcorder to a TV or VCR as  
Set the camcorders Power Switch to “  
turn on the VCRs power, and insert the  
,  
shown in the illustration (pg. 32).  
If using a VCR . . . go to step 3.  
If not . . . go to step 4.  
appropriate cassettes in the camcorder and the  
VCR.  
Connect the VCR output to the TV input,  
Engage the VCRs AUX and Record-Pause  
3
4
5
referring to your VCRs instruction manual.  
3
4
modes.  
Turn on the camcorder, the VCR and the TV.  
Engage the camcorders Play mode to find a  
spot just before the edit-in point. Once it is  
reached, press 4/6 on the camcorder.  
Set the VCR to its AUX input mode, and set the  
TV to its VIDEO mode.  
Press 4/6 on the camcorder and engage the  
VCRs Record mode.  
5
6
7
NOTES:  
Engage the VCRs Record-Pause mode and press  
4/6 on the camcorder.  
It is recommended to use the AC Adapter as the  
power supply instead of the battery pack  
(pg. 7).  
Repeat steps 4 through 6 for additional editing,  
then stop the VCR and camcorder when  
finished.  
If your VCR has an S-Video input connector,  
connect the camcorder and the VCR using the  
provided S-Video cable. This can improve the  
dubbed picture quality.  
To monitor the picture and sound from the  
camcorder without inserting a tape, set the  
camcorders Power Switch to “ ” or “ ”, then  
set your TV to the appropriate input mode.  
Make sure you adjust the TV sound volume to its  
minimum level to avoid a sudden burst of sound  
when the camcorder is turned on.  
If you have a TV or speakers that are not specially  
shielded, do not place the speakers adjacent to the  
TV as interference will occur in the camcorder  
playback picture.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYBACK Using The Cassette Adapter  
34EN  
Cassette Adapter (optional)  
Use this to play back an S-VHS-C/VHS-C video cassette  
recorded with this camcorder on a VHS VCR. It is fully  
compatible with any S-VHS/VHS video cassette recorder.  
The C-P7U (optional) adapter is battery powered and  
automatically performs tape loading and unloading.  
Slide the battery cover up to remove it, install one  
1
2
AA (R6)size battery as shown, then reattach the  
cover.  
Slide the latch to open the adapter compartment  
door, then insert the cassette and close the compart-  
ment door.  
VCR  
Load the cassette adapter into the VCR and play the  
tape back as you would any other.  
Compartment door  
3
4
Slide the latch and the compartment door opens  
automatically. This may take around 10 seconds. Do  
not attempt to force the adapter open. Then, insert  
your finger in the hole on the underside of the  
adapter as shown in the illustration at left, and push  
up and remove the cassette.  
NOTES:  
During tape loading and unloading, do not touch the  
reels for safety and tape protection.  
Tapes recorded in S-VHS or S-VHS ET mode cannot be  
played back on a regular VHS VCR. Playback is possible  
with a VCR equipped with the S-VHS function.  
During special-effect playback (slow motion, still frame,  
etc.), the picture may vibrate or noise bars may appear  
on the screen.  
Sliding latch  
Compact video cassette  
To record on a VCR using a compact cassette and the  
adapter, cover the adapters recording safety hole with  
adhesive tape.  
Reels  
Recording safety hole  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE CONTROL UNIT (GR-SXM607 only)  
EN35  
The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic  
operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR.  
1
RM-V715U  
(provided)  
RM-V700U (optional)  
#
@
1
%
2
8
2
$
7
8
3
4
5
6
9
0
!
@
9
0
^
5
4
3
!
6
7
&
Functions  
Buttons  
With the camcorders Power Switch set  
to “ ” or “ ”.  
With the camcorders Power Switch  
set to “ ”.  
1 Infrared beam  
Transmits the beam signal.  
transmitting window  
2 ZOOM (T/W) Buttons Zoom in/out (pg. 16)  
Zoom in/out (pg. 37)  
Playback start (pg. 30)  
3 PLAY Button  
4 REW Button  
Retake (rewind), Quick Review  
Rewind, Reverse Shuttle Search  
(pg. 30)  
(pg. 17)  
5 STOP Button  
Stop (pg. 30)  
Insert Editing (pg. 38)  
6 INSERT Button  
7 REC TIME Button  
Animation, Time-Lapse (pg. 37)  
ANIM. Button  
8 START/STOP Button  
9 FF Button  
Functions the same as the Recording Start/Stop Button on the camcorder.  
Retake (forward) (pg. 17)  
Fast-Forward, Forward Shuttle Search  
(pg. 30)  
0 PAUSE Button  
! A.DUB Button  
Pause (pg. 30)  
Audio dubbing (pg. 39)  
@ INT. TIME Button  
Time-Lapse (pg. 37)  
SELF TIMER Button*  
# PAUSE IN Connector  
$ MBR SET Button  
% VISS Button  
pg. 41  
pg. 40  
Ineffective  
^ VCR CTL Button  
& R.A.EDIT Buttons  
pg. 40  
pg. 42  
*This function is unavailable with this camcorder.  
# & : RM-V700U only  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE CONTROL UNIT (GR-SXM607 only) (cont.)  
36EN  
Installing The Batteries  
(RM-V715U, provided)  
1
The remote control uses two AAA (R03)size  
batteries. See General Battery Precautions”  
(pg. 45).  
3
2
Open the battery compartment cover as  
1
2
3
illustrated.  
Insert two AAA (R03)size batteries in the  
correct direction.  
Replace the battery compartment cover.  
A
B
Installing The Battery  
(RM-V700U, optional)  
1
The remote control uses one lithium battery  
(CR2025).  
2
3
Lock hole  
: Pull out the battery holder while sliding the  
1
1
lock hole.  
: Pinch the release tab and pull out the  
battery holder.  
Insert the battery in the holder, and be sure to  
2
3
have the +mark visible.  
Slide the holder back in until you hear a click.  
Read the cautions in the instructions provided  
with the RM-V700U.  
2
3
1
Knob  
1
Remote sensor  
When using the remote control, be sure to point it  
at the remote sensor. The illustration shows the  
approximate transmitted beam effective area for  
indoor use.  
The transmitted beam may not be effective or may  
cause incorrect operation outdoors or when the  
remote sensor is directly exposed to sunlight or  
powerful lighting.  
Transmitted beam  
effective area  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN37  
To magnify the recorded image up to 10X at any time  
during playback.  
Remote sensor  
Playback Zoom  
NOTES:  
Use the RM-V715U remote control unit to perform this  
procedure.  
Make sure that the TBC mode is activated (pg. 31).  
1) Press PLAY to find the scene of interest.  
2) Press the ZOOM Buttons (T/W) on the remote control.  
Make sure the remote control is pointed at the  
camcorders remote sensor. Pressing T zooms in.  
To End Zoom . . .  
.... press and hold W until magnification returns to  
normal. Or, press STOP and then press PLAY.  
ZOOM (T/W)  
NOTES:  
PLAY  
STOP  
Zoom can also be used during still playback.  
Due to digital image processing, the quality of the image  
may suffer.  
RM-V715U  
After zooming in on a still video image, when normal  
playback is started, the zoomed-in effect is momentarily  
cancelled but then resumes, returning magnification to  
the previously set level.  
Display  
Animation and Time-Lapse  
The remote control lets you set/release Interval Time and  
Recording Time without using the Menu Screen.  
Interval time  
indicator  
Animation  
1) Set  
1
1
M I N  
/
2
S
Recording time  
indicator  
Instead of performing steps 1 and 2 on pg. 26  
(Animation), press REC TIME on the remote control.  
Each time REC TIME is pressed, the Recording Time  
indicator appears, changing in the following order:  
1/4S, 1/2S, 1S, 5S and no indication (off).  
2) Release  
Remote sensor  
Instead of using the Menu in step 5 on pg. 26, press  
REC TIME on the remote control until the Recording  
Time indicator disappears.  
Time-Lapse  
1) Set  
Instead of performing steps 1 and 2 on pg. 26 (Time-  
Lapse), press REC TIME and INT. TIME on the remote  
control. Each time REC TIME is pressed, the Recording  
Time indicator appears, changing in the following  
order: 1/4S, 1/2S, 1S, 5S and no indication (off). Each  
time INT. TIME is pressed, the Interval Time indicator  
appears, changing in the following order: 15S, 30S,  
1MIN, 5MIN and no indication (off).  
2) Release  
START/STOP  
Instead of using the Menu in step 4 on pg. 26 (Time-  
Lapse), press REC TIME and INT. TIME on the remote  
control until the indicators disappear.  
INT. TIME  
REC. TIME  
NOTE:  
Also refer to pg. 26.  
RM-V715U  
RM-V700U  
(optional)  
OR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE CONTROL UNIT (GR-SXM607 only) (cont.)  
38EN  
COUNTER R/M Button  
Insert Editing  
You can record a new scene onto a previously recorded  
tape, replacing a section of the original recording with  
minimal picture distortion at the in- and out-points. The  
original audio remains unchanged.  
NOTE:  
Use the remote control unit to perform this procedure.  
Set the Power Switch to “  
.  
1
2
3
Play back the tape, locate the Edit-Out point and  
press PAUSE.  
Press and hold COUNTER R/M on the camcorder for  
more than 1 second to reset the tape counter, then  
press it again for less than 1 second so that M”  
appears.  
Power Switch  
Display  
Press REW to go a little beyond the beginning of the  
scene you want to replace, press PLAY to view the  
recorded tape, and press PAUSE exactly at the Edit-In  
point where the new scene should start.  
4
5
w
Insert editing  
indicator  
Press and hold INSERT, and without releasing  
INSERT, press and release PAUSE. The Insert Editing  
indicator appears and the Insert Editing mode is  
engaged. When the scene the camcorder is aimed at  
appears on the screen, go to the next step.  
:
:
Tape Counter  
M
0
12 34  
To begin Insert Editing, press START/STOP. When the  
counter reaches 0:00:00, editing stops automati-  
cally and the camcorder enters the Insert-Pause  
mode.  
6
7
Remote sensor  
To end Insert Editing, press STOP.  
NOTES:  
During Insert Editing, the original audio will be heard  
from the speaker.  
After step 5, Retake (pg. 17) can be performed.  
The tape may stop slightly before or after the designated  
end point, and noise bars may appear. Neither indicates  
a defect in the unit.  
Only the video signal is recorded in the Insert Editing  
mode.  
START/STOP  
REW  
PLAY  
PAUSE  
STOP  
INSERT  
RM-V715U  
RM-V700U  
(optional)  
OR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN39  
Display  
Audio Dubbing  
e
4
Audio dubbing  
indicator  
You can record a new soundtrack on a prerecorded tape.  
The existing original sound is erased and replaced by the  
sound from the built-in microphone.  
:
:
M
0
05 20  
Perform steps 1, 2 and 3 of the Insert Editing procedure  
(pg. 38) before continuing.  
During Audio  
Dubbing  
NOTE:  
Use the remote control unit to perform the following  
procedures.  
Press REW to go a little beyond the beginning of the  
Remote sensor  
1
scene onto which you want to dub the new audio,  
press PLAY to view the recorded tape, then press  
PAUSE at exactly the point where dubbing should  
start.  
Press and hold A. DUB, and without releasing  
A. DUB, press and release PAUSE. The Audio Dub-  
Standby mode is engaged.  
2
3
To begin Audio Dubbing, press PLAY. When the  
counter reaches 0:00:00, Audio Dubbing stops  
automatically and the camcorder enters the Audio  
Dub-Standby mode.  
Microphone  
To end Audio Dubbing, press STOP.  
4
START/STOP  
REW  
PLAY  
NOTES:  
Do not press FF or REW during Audio Dub-Standby, or  
the edit points will not be accurate.  
PAUSE  
A.DUB  
If the microphone is too close to the TV, or if the TVs  
volume is too high, whistling or howling may occur.  
STOP  
NOTES  
RM-V715U  
RM-V700U  
(optional)  
OR  
(for Insert Editing and Audio Dubbing):  
Insert Editing and Audio Dubbing may not work  
correctly if the tape contains blank segments, or if the  
recording speed was changed during the original  
recording.  
To edit/dub onto a tape, make sure the Erase Protection  
tab is in the position that allows recording. If not, slide  
the tab. Some cassettes have removable tabs. If the tab  
has been removed, cover the hole with adhesive tape.  
Do not press STOP during Insert Editing or Audio  
Dubbing, or the edit points will not be accurate.  
During Insert Editing and Audio Dubbing, when  
Insert-Pause or Audio Dub-Standby is engaged, the  
counter may go slightly past 0:00:00. Recording,  
however, stops at exactly 0:00:00.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE CONTROL UNIT (GR-SXM607 only) (cont.)  
40EN  
Random Assemble Editing [R.A.Edit]  
Create edited videos easily using your camcorder as  
the source player. You can select up to 8 cutsfor  
automatic editing, in any order you like. R.A.Edit is  
VCR (Recording deck)  
more easily performed when the RM-V700U MBR  
(Multi-Brand Remote, pg. 35) is set to operate  
with your brand of VCR (see VCR CODE LIST), but  
can also be performed by operating the VCR  
manually.  
Before operation, make sure the lithium battery is  
installed in the remote control RM-V700U  
(pg. 36).  
SET REMOTE/VCR CODE  
Turn off the power to the VCR and point the  
remote towards the VCRs infrared sensor. Then,  
referring to the VCR CODE LIST on the left,  
press and hold MBR SET, and press button (A)  
and then (B).  
MBR SET  
VCR CTL  
1
4
7
2
5
8
3
6
9
1
0
The code is automatically set once you release  
MBR SET, and the VCRs power comes on.  
RM-V700U (optional)  
Make sure the VCRs power is on. Then, while  
holding VCR CTL, press the button on the  
remote for the desired function. The functions  
the remote can control are PLAY, STOP, PAUSE,  
FF, REW and VCR REC STBY (you do not need  
to press VCR CTL for this one).  
2
VCR CODE LIST  
VCR BRAND  
NAME  
BUTTONS  
(A) (B)  
VCR BRAND  
NAME  
BUTTONS  
(A) (B)  
You are now ready to try Random Assemble  
Editing.  
AKAI  
6
6
7
2ꢀ  
4ꢀ  
7
PHILIPS  
1
9
1
9
9
9
1
3
7
3
3
9
9
1
1
6
6
3
3
9
9
9
3
9ꢀ  
5ꢀ  
1ꢀ  
4ꢀ  
1ꢀ  
6ꢀ  
2ꢀ  
3ꢀ  
2ꢀ  
6ꢀ  
5
1ꢀ  
6
5ꢀ  
`
5ꢀ  
`ꢀ  
9ꢀ  
1ꢀ  
1ꢀ  
6ꢀ  
7ꢀ  
2
IMPORTANT  
BLAUPUNKT  
FERGUSON  
1
3
Although the MBR is compatible with JVC VCRs and  
those of many other makers, it may not work with  
yours or may offer limited functions.  
9
9
3
7ꢀ  
8ꢀ  
2
NOTES:  
If the VCRs power does not come on in step 1, try  
another code from the VCR CODE LIST.  
Some brands of VCR do not come on automati-  
cally. In this case, turn the power on manually and  
try step 2.  
GRUNDIG  
HITACHI  
1
3
4ꢀ  
4
SANYO  
6
6
6ꢀ  
3
SELECO,  
REX  
JVC  
A
B
C
9
9
9
1ꢀ  
6ꢀ  
3
If the remote control is not able to control the VCR,  
use the controls on the VCR.  
When the remote controls battery runs out, the  
VCR brand you have set will be erased.  
In that case, replace the old battery with a new one  
and reset the VCR brand.  
SHARP  
SONY  
MITSUBISHI  
6
6
7ꢀ  
8
NEC  
3
3
7ꢀ  
8
THOMSON,  
TELEFUNKEN,  
SABA,  
PANASONIC  
1
1
1
9
1
3ꢀ  
7ꢀ  
1ꢀ  
4ꢀ  
8
NORDMENDE  
TOSHIBA  
6
6
9ꢀ  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN41  
MAKE CONNECTIONS  
JVC VCR EQUIPPED WITH REMOTE  
1
PAUSE TERMINAL  
Connect the editing cable to the Remote PAUSE  
terminal.  
JVC VCR NOT EQUIPPED WITH REMOTE  
PAUSE TERMINAL BUT EQUIPPED WITH  
R.A. EDIT CONNECTOR  
To  
J terminal  
(JLIP)  
Connect the editing cable to the R.A.EDIT  
connector.  
To S-Video  
output  
connector  
Open  
the cover.  
VCR OTHER THAN TYPE  
OR  
To Video* output  
and Audio output  
connectors  
Connect the editing cable to the RM-V700Us  
PAUSE-IN connector.  
Insert a recorded tape into the camcorder and set the  
2
3
Power Switch to “  
.  
Turn the VCR power on, insert a recordable tape and  
engage the AUX mode (refer to the VCRs  
instructions).  
S-Video  
cable  
A/V  
cable  
Editing cable  
NOTES:  
(ø3.5 mini-plug  
cable) (optional)  
If your VCR has an S-Video input connector or a SCART  
connector compatible with Y/C signals, connect the  
camcorder and the VCR using the provided S-Video  
cable. This can improve the dubbed picture quality.  
If you use the cable adapter, set the Y/C/CVBSvideo  
out select switch as required.  
To AUDIO  
(L/MONO),  
VIDEO* and  
Y/C : When connecting to a VCR which accepts Y/C  
signals and uses an S-Video cable.  
-IN connectors  
Y/C/CVBS”  
video out  
select switch  
CVBS : When connecting to a VCR which does not  
accept Y/C signals and uses an A/V cable.  
If your VCR has the  
SCART connector,  
use the cable adapter.  
To Remote  
PAUSE  
VCR  
To PAUSE-IN  
TV  
RM-V700U  
(optional)  
* Connect when an S-Video cable is not used.  
CONTINUED ON NEXT PAGE.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE CONTROL UNIT (GR-SXM607 only) (cont.)  
42EN  
SELECT SCENES  
Remote sensor  
Point the remote control at the camcorders remote  
4
5
6
sensor. Press PLAY, then press ON/OFF on the remote  
control. The R.A. Edit counter display appears.  
Press REW or FF to locate the beginning of the scene  
you want, then press IN/OUT to register that point.  
The data appears under INon the display.  
Press REW or FF to locate the end of the scene and  
press IN/OUT to register it.  
The data appears under OUTon the display.  
The total time of the registered scene(s) is displayed  
at the bottom of the screen.  
Repeat steps 5 and 6 for each additional scene (as  
7
8
many as 8).  
Power Switch  
To make corrections, press CANCEL during steps 5  
and 6 to erase the most recently registered point.  
FF  
REW  
PAUSE  
CANCEL  
ON/OFF  
PLAY  
IN/OUT  
NOTES:  
There must be at least one second between an in-point  
and its corresponding out-point.  
RM-V700U  
(optional)  
To ensure correct operation, there should be at least  
15 seconds between an out-point and the next in-point.  
Blank portions of a tape cannot be registered as in-points  
or out-points.  
I N  
OUT  
:
:
– – : – – : – –  
1
0
00 25  
2
3
4
5
6
7
8
If it takes more than 5 minutes to search for an in-point,  
the VCRs Record-Pause mode is cancelled and editing  
does not take place.  
Pressing ON/OFF clears all in- and out-points from  
memory.  
Leave a small margin for error around each in-point to  
ensure the scene is recorded in its entirety.  
Turning off the camcorders power erases all registered  
in- and out-points.  
:
:
:
COUNTER  
TOTAL  
0
0
00 25  
:
00 00  
I N  
OUT  
:
:
:
:
:
:
:
:
:
1
2
3
4
5
6
7
8
0
0
0
0
00 25  
03 18  
0
0
0
01 05  
:
:
03 31  
:
:
:
02 33  
02 53  
– – : – – : – –  
04 11  
:
:
:
COUNTER  
TOTAL  
0
0
04 11  
:
01 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN43  
AUTOMATIC EDITING TO VCR  
Original tape (camcorder)  
1
IN  
3
2
IN  
Rewind the tape in the camcorder to the beginning of  
OUT  
IN OUT  
OUT  
9
10  
the scene you want to edit and press PAUSE.  
Point the remote control towards the VCRs infrared  
sensor and press VCR REC STBY, or manually engage  
the VCRs Record-Pause mode.  
Press the Recording Start/Stop Button on the  
camcorder to begin Automatic Editing, and the  
previously selected scenes are copied to the VCR in  
the specified order.  
Edited tape (VCR)  
11  
While editing, the R.A. Edit counter of the scene  
which is being copied is shown with a blinking  
highlight.  
Pressing START/STOP on the remote control does  
not start editing.  
STOP (5) Button  
REW (2) Button  
When all selected scenes have been copied, the  
camcorder and VCR enter the Still or Pause mode.  
Press STOP on both units. To make the R.A. Edit  
counter display disappear, press ON/OFF.  
When finished editing, be sure to disconnect the  
editing cable and the A/V cable.  
PAUSE (6) Button  
12  
NOTES:  
If you performed step 1  
on page 41 (MAKE  
CONNECTIONS), keep the remote control pointed at  
the VCR during editing.  
The on-screen display only appears while the camcorder  
searches for each scene.  
There may be noise at in- or out-points on the edited  
tape with certain VCRs.  
Power Switch  
Recording Start/Stop Button  
Remote Sensor  
RM-V700U  
(optional)  
VCR REC STBY  
ON/OFF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DETAILS  
44EN  
I T E M S  
N O T E S  
Perform charging where the temperature is between 10° and 35°C. 20° to  
25°C is the ideal temperature range for charging. If the environment is too  
cold, charging may be incomplete.  
Power  
(pg. 6)  
Charging times noted above are for a fully discharged battery pack.  
Charging time varies according to the ambient temperature and the status of  
the battery pack.  
To avoid interference with reception, do not use the AC Adapter near a  
radio.  
Since the AC Adapter processes electricity internally, it becomes warm  
during use. Be sure to use it only in well-ventilated areas.  
The following operation stops charging or discharing:  
Set the Power Switch to “  
, “ ” or “ ”.  
Disconnect the AC adapter from the camcorder.  
Unplug the AC adapters power cord from the AC outlet.  
Detach the battery from the camcorder.  
The date/time cannot be stored in memory if the built-in clock battery runs  
out. Consult an authorized JVC dealer for replacement, or set the date/time  
as necessary before you start shooting.  
Date/Time  
Settings  
(pg. 9)  
When the Power Switch is set to “ ” or “ ” and the LCD monitor is  
opened at an angle of 60 degrees or more, the LCD monitor switches on  
and the viewfinder switches off automatically to save power.  
Recording  
(pg. 14, 15)  
The cassette holder cannot be opened unless a power supply is attached.  
There may be a delay after you slide EJECT until the cassette holder opens.  
Do not use force.  
The time required to calculate the remaining tape length, and the accuracy  
of the calculation, may vary according to the type of tape used.  
The tape remaining time indicator is correct only if the correct tape length  
has been selected (pg. 12).  
TAPE ENDappears when the tape reaches its end, and the power goes off  
automatically if left in this condition for 5 minutes.  
TAPE ENDalso appears when a cassette whose tape is already at its end  
is loaded.  
If the Recording Start/Stop button is pressed after the Record-Standby mode  
has continued for over 5 minutes, recording may not start immediately.  
While shooting, sound is not heard from the speaker.  
The TBCindicator turns green (grey with a camcorder equipped with a  
TBC  
black/white viewfinder) while TBC is working.  
(Time Base  
Corrector)  
(pg. 31)  
TBC does not work during still playback and shuttle search.  
The TBCindicator turns white while TBC is not operative.  
It may take a few seconds before TBC actually starts working.  
The picture may be distorted if the TBC mode is activated or deactivated at  
the edit-in/-out points or when normal playback resumes after still playback  
or shuttle search.  
If the playback picture is distorted when TBC is set to on, turn off TBC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTIONS  
EN45  
Video Light  
Battery Packs  
The battery packs are nickel-cadmium  
or nickel metal-hydride batteries.  
Before using the supplied battery pack  
or an optional battery pack, be sure to  
read the following cautions:  
DANGER:  
The video light becomes extremely hot. Do not  
touch it either while in operation or soon after  
turning it off, otherwise serious injury may result.  
Do not place the camcorder into the carrying case  
immediately after using the video light, since it  
remains extremely hot for some time.  
When operating, keep a distance of about 30 cm  
between the video light and people or object.  
Do not use near flammable or explosive materials.  
It is recommended that you consult your nearest  
JVC dealer for replacing the video light.  
1. To avoid hazard . . .  
... do not burn.  
Terminals  
... do not short-circuit the terminals.  
... do not modify or disassemble.  
... use only specified chargers.  
2. To prevent damage and prolong service life . . .  
... do not subject to unnecessary shock.  
... avoid repeated charging without fully  
discharging.  
... charge in an environment where temperatures  
are within the tolerances shown in the chart  
below. This is a chemical reaction type  
batterycooler temperatures impede chemical  
reaction, while warmer temperatures can  
prevent complete charging.  
... store in a cool, dry place. Extended exposure to  
high temperatures will increase natural  
discharge and shorten service life.  
... avoid prolonged uncharged storage.  
... remove from charger or powered unit when  
not in use, as some machines use current even  
when switched off.  
General Battery Precautions  
If the remote control or cassette adapter is not  
functioning even if it is being operated correctly, the  
batteries are exhausted. Replace them with fresh  
ones.  
Use only the following batteries:  
Remote control ................. AAA (R03) size x 2  
(RM-V715U)  
Cassette adapter ............... AA (R6) size x 1  
(C-P6U or C-P7U)  
Please make note of the following rules for battery  
use. When misused, the batteries can leak or  
explode.  
NOTES:  
It is normal for the battery pack to be warm after  
charging, or after use.  
1. When replacing batteries, refer to page 36 for the  
remote control, or read the cassette adapter  
(C-P6U/C-P7U) instructions.  
2. Do not use any different size of batteries from  
those specified.  
3. Be sure to install batteries in the correct direction.  
4. Do not use rechargeable batteries.  
5. Do not expose the batteries to excessive heat as  
they can leak or explode.  
Temperature Range Specifications  
Charging .................... 10°C to 35°C  
Operation .................. 0°C to 40°C  
Storage ...................... 10°C to 30°C  
Recharging time is based on room temperature of  
20°C.  
The lower the temperature, the longer recharging  
takes.  
6. Do not dispose of the batteries in a fire.  
7. Remove the batteries from the unit if it is to be  
stored for an extended period to avoid battery  
leakage which can cause malfunctions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTIONS (cont.)  
46EN  
Cassettes  
Main Unit  
To properly use and store your cassettes, be sure to  
read the following cautions:  
1. During use . . .  
1. For safety, DO NOT . . .  
... open the camcorders chassis.  
... disassemble or modify the unit.  
... short-circuit the terminals of the battery pack.  
Keep it away from metallic objects when not in  
use.  
... allow inflammables, water or metallic objects  
to enter the unit.  
... remove the battery pack or disconnect the  
power supply while the power is on.  
... leave the battery pack attached when the  
camcorder is not in use.  
... make sure the cassette bears the S-VHS-C or  
VHS-C mark.  
... be aware that recording onto prerecorded tapes  
automatically erases the previously recorded  
video and audio signals.  
... make sure the cassette is positioned properly  
when inserting.  
... do not load and unload the cassette  
repeatedly without allowing the tape to run at  
all. This slackens the tape and can result in  
damage.  
2. Avoid using the unit . . .  
... in places subject to excessive humidity or dust.  
... in places subject to soot or steam such as near  
a cooking stove.  
... in places subject to excessive shock or  
vibration.  
... near a television set.  
... do not open the front tape cover. This exposes  
the tape to fingerprints and dust.  
2. Store cassettes . . .  
... away from heaters or other heat sources.  
... out of direct sunlight.  
... where they wont be subject to unnecessary  
shock or vibration.  
... where they wont be exposed to strong  
magnetic fields (such as those generated by  
motors, transformers or magnets).  
... vertically, in their original cases.  
... near appliances generating strong magnetic or  
electric fields (speakers, broadcasting antennas,  
etc.).  
... in places subject to extremely high (over 40°C)  
or extremely low (under 0°C) temperatures.  
3. DO NOT leave the unit . . .  
... in places of over 50°C.  
... in places where humidity is extremely low.  
(below 35%) or extremely high (above 80%).  
... in direct sunlight.  
... in a closed car in summer.  
... near a heater.  
... in dusty places such as a beach.  
4. To protect the unit, DO NOT . . .  
... allow it to become wet.  
... drop the unit or strike it against hard objects.  
... subject it to shock or excessive vibration during  
transportation.  
... keep the lens directed at extremely bright  
objects for long periods.  
... direct the eyepiece of the viewfinder at the sun.  
... carry it by holding the viewfinder or the LCD  
monitor. Be sure to hold the main unit with  
both hands or use the grip.  
... swing it excessively when using the shoulder  
strap.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN47  
LCD Monitor  
For Your Maintenance  
1. To prevent damage to the LCD monitor,  
DO NOT . . .  
1. After Use  
1 Set the Power Switch to OFFto turn off the  
... push it strongly or apply any shocks.  
... place the camcorder with the LCD monitor on  
the bottom.  
camcorder.  
2 Open the LCD monitor to an angle of over 60  
degrees. Slide EJECT to open the cassette  
holder, then remove the cassette.  
2. To prolong service life . . .  
... avoid rubbing it with coarse cloth.  
3 Close and lock the cassette holder by pressing  
3. Be aware of the following phenomena for LCD  
monitor use. These are not malfunctions:  
the Close button.  
4 Close and lock the LCD monitor.  
While using the camcorder, the surface around  
the LCD monitor and/or the back of the LCD  
monitor may heat up.  
If you leave power on for a long time, the surface  
around the LCD monitor becomes hot.  
5 Slide BATTERY RELEASE to remove the battery  
pack.  
6 Attach the provided lens cap to the camcorders  
lens.  
2. Cleaning The Camcorder  
1 CLEAN EXTERIOR  
Wipe gently with a soft cloth.  
Put cloth in diluted mild soap and wring it well  
to wipe off heavy dirt, then wipe again with a  
dry cloth.  
About moisture condensation . . .  
You may have observed that pouring a cold  
liquid into a glass will cause drops of water to  
form on the glassouter surface. This same  
phenomenon occurs on the head drum of a  
camcorder when it is moved from a cool place  
to a warm place, after heating a cold room,  
under extremely humid conditions or in a  
place directly subjected to the cool air from an  
air conditioner.  
2 CLEAN LCD MONITOR  
Open the LCD monitor and wipe it gently with  
a soft cloth. Be careful not to damage the  
monitor. Close the LCD monitor.  
3 CLEAN LENS  
Blow it with a blower brush, then wipe it gently  
with lens cleaning paper.  
4 REMOVE EYEPIECE  
Turn the eyepiece counterclockwise and pull it  
out.  
Moisture on the head drum can cause severe  
damage to the video tape, and can lead to  
internal damage to the camcorder itself.  
5 CLEAN VIEWFINDER  
Remove dust using a blower brush.  
Serious malfunctioning  
6 RE-ATTACH EYEPIECE  
If malfunctioning occurs, stop using the unit  
immediately and consult your local JVC dealer.  
Re-attach the eyepiece and turn it clockwise.  
NOTES:  
Avoid using strong cleaning agents such as benzine  
or alcohol.  
Cleaning should be done only after the battery  
pack has been removed or other power units have  
been disconnected.  
Mould may form if the lens is left dirty.  
When using a cleaner or chemically treated cloth,  
refer to the cautions that came with it.  
When removing the eyepiece, be sure to hold the  
viewfinder securely.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
48EN  
If, after following the steps in the chart below, the problem still exists, please consult your JVC dealer.  
The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio,  
etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery  
pack, AC Adapter, etc.); and then re-connect it and proceed as usual from the beginning.  
SYMPTOM  
POSSIBLE CAUSE(S)  
POWER  
No power is supplied.  
The battery pack has not been attached correctly (pg. 6).  
The battery pack is not charged (pg. 6).  
The power supply has not been correctly connected  
(pg. 6, 7).  
The power suddenly goes off and  
does not come back on by itself.  
The battery pack has completely discharged.  
Remove the cassette and disconnect the power source, then  
after a few minutes, try turning the power back on. If it still  
does not come on, consult your nearest JVC dealer.  
RECORDING  
Recording cannot be performed.  
Make sure the Erase Protection tab is in the position that  
allows recording. If not, slide the tab. Some cassettes have  
removable tabs. If the tab has been removed, cover the  
hole with adhesive tape (pg. 13).  
Recording does not start.  
The camcorder Power Switch has not been set to “ ” or  
(pg. 14).  
Animation or Time-Lapse is not  
available.  
Before recording in the Animation mode at the very  
beginning of a tape, set the camcorder to the Recording  
mode for about 5 seconds, so that the tape runs smoothly.  
Using the Fade-in function at this point is a good way to  
begin an animated programme (pg. 26, 37).  
PLAYBACK  
The tape is running, but there is no  
playback picture.  
The TV has not been set to its VIDEO mode or channel.  
If A/V connection is used, the TVs VIDEO/TV Switch has  
not been set to VIDEO.  
Playback picture is blurred or  
interrupted.  
The video heads are dirty or worn out. Consult your nearest  
JVC dealer for head cleaning or replacement.  
The counter indication is blurred  
during Still playback.  
This is normal.  
TAPE TRANSPORT  
The tape stops during fast-forward or  
rewind.  
The Counter Memory Function has been activated  
(pg. 31).  
Rewinding or fast-forwarding cannot  
be performed.  
The tape is already fully wound on one reel or the other.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN49  
SYMPTOM  
POSSIBLE CAUSE(S)  
OTHER  
During recording, the indications do  
not appear.  
Set DISPLAYto FULLin SYSTEM MENU (pg. 24).  
The tape will not eject.  
The battery pack is running low.  
If the LCD monitor is not open over 60 degrees, the EJECT  
Switch does not function.  
Some functions are not available.  
The Power Switch is set to “ ”.  
Certain combinations of modes or effects are not possible  
to use.  
Vertical white lines appear when  
shooting a very bright object.  
This sometimes occurs when the contrast between the  
background and the object is great. It is not a defect of the  
camcorder.  
Bright, crystal-shaped spots appear in  
the LCD monitor and the viewfinder.  
Sunlight is directly entering the lens. This is not a defect of  
the camcorder.  
The rear of the LCD monitor is hot.  
The light used to illuminate the LCD monitor causes it to be  
hot. Close the LCD monitor to turn it off or set the Power  
Switch to OFF, and let the unit cool down.  
Coloured bright spots appear all over  
the LCD monitor or the viewfinder.  
The LCD monitor and the viewfinder are made with high-  
precision technology. However, black spots or bright spots  
of light (red, green or blue) may appear constantly on the  
LCD monitor or in the viewfinder. These spots are not  
recorded on the tape. This is not due to any defect of the  
unit. (Effective dots: more than 99.99 %.)  
The indicators and the picture colour  
on the LCD monitor are not clear.  
This may occur when the surface or the edge of the LCD  
monitor is pressed.  
The LCD monitor, the viewfinder and  
the lens have become dirty  
(ex. fingerprints).  
Wipe them gently with a soft cloth. Gently wipe in a  
semicircular motion, as wiping strongly spreads the stain  
and it wont come out easily.  
An error number (i.e. E03) appears.  
Turn the camcorders power off, then disconnect the power  
source. After a few minutes, try turning the power on again.  
If the error number still appears in the viewfinder, consult  
your nearest JVC dealer.  
The image is out of focus.  
The dioptre needs to be adjusted (pg. 8).  
The scene being shot is adversely affecting the operation of  
Auto Focus (pg. 28).  
The date and time displays  
disappear.  
If you remove the power source from the camcorder while  
the power is on, all settings and selections are erased. Make  
sure to turn the camcorders power off before disconnecting  
the power source.  
The wrong date and time are  
displayed/recorded.  
If you have not performed Date/Time Setting (pg. 9), the  
date and time are not displayed/recorded correctly. Be sure  
that Date/Time setting is carried out.  
Even though the lens cap is detached,  
the LENS CAPwarning indicator  
(pg. 53) blinks.  
The LENS CAPwarning indicator may blink when the  
camcorder is used in dark areas, regardless of whether the  
lens cap is attached or detached.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX Controls, Connectors And Indicators  
50EN  
p
#
$
%
^
Q
q
y u  
1
2
3
4
5
w
e
6 7 8 9 0 !  
r
t
(
*
&
o
i
W
)
@
E
R
T
I
Y
U
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN51  
Controls  
Connectors  
1 Video Light Switch [LIGHT OFF/AUTO/ON]  
(GR-SXM607 only)............................... pg. 17  
The connectors q to t are located beneath the  
cover.  
2 Stop Button [STOP] .............................. pg. 30  
3 Retake Rewind Button [RETAKE R]..... pg. 17  
q S-Video Output Connector [S] .............. pg. 32  
w Audio Output Connector [A] ................ pg. 32  
e Video Output Connector [V] ................ pg. 32  
Quick Review Button [  
R] ............ pg. 17  
Rewind Button [R]............................. pg. 30  
4 Play/Pause Button ................................ pg. 30  
5 Retake Forward Button [RETAKE F] .... pg. 17  
Fast-Forward Button [F] ..................... pg. 30  
r J Terminal/Edit Connector  
[JLIP (Joint Level Interface Protocol)/EDIT]  
Connect the editing cable when performing  
Random Assemble Editing (pg. 40 43).  
It is used to connect the camcorder to a device  
such as a personal computer.  
6 Fade/Wipe Button [FADE/WIPE] ........ pg. 19  
Counter Reset/Memory Button  
For further details consult your nearest JVC  
dealer.  
JLIP-controlled editing from camcorder to VCR  
is not possible if the VCR is not equipped with a  
J terminal.  
[COUNTER R/M] .............................. pg. 31  
7 Program AE Button [P. AE] .................... pg. 20  
8 Digital Effect Button [DIGIFECT] .......... pg. 21  
9 NIGHT-SCOPE Button ......................... pg. 18  
0 REFRESH Button .................................... pg. 6  
! EJECT Switch ....................................... pg. 13  
@ Close Button ........................................ pg. 13  
t DC IN Connector............................... pg. 6, 7  
Indicators  
y CHARGE Lamp...................................... pg. 6  
u Power Lamp ..................................... pg. 14  
REFRESH Lamp ................................... pg. 6  
# MENU Wheel [, +] .......................... pg. 22  
BRIGHT Wheel [, +] ................. pg. 14, 30  
TRACKING Wheel [, +] ................... pg. 31  
$ Snapshot Button [SNAPSHOT] ............. pg. 18  
% Power Zoom Lever [T/W] .................. pg. 16  
Speaker Volume Control [VOL.] ........ pg. 30  
Other Parts  
i LCD Monitor ................................. pg. 14, 15  
o Shoulder Strap Eyelets ............................ pg. 8  
p Eyepiece  
Q Battery Pack Mount ............................... pg. 6  
W Viewfinder ............................................. pg. 8  
E Speaker ............................................... pg. 30  
^ Picture Stabiliser Button  
[P. STABILIZER] ................................. pg. 16  
Time Base Corrector Button [TBC] ..... pg. 31  
& Power Switch  
[
, OFF,  
,
] ...................... pg. 14, 30  
* Recording Start/Stop Button.................. pg. 14  
R Camera sensor  
( Battery Release Switch  
Be careful not to cover this area; a sensor  
necessary for shooting is built-in here.  
Remote Sensor  
[BATTERY RELEASE] .............................. pg. 6  
) Dioptre Adjustment Control ................... pg. 8  
(GR-SXM607 only) ............................ pg. 36  
T Grip Strap .............................................. pg. 8  
Y Microphone......................................... pg. 39  
U Video Light  
(GR-SXM607 only)............................... pg. 17  
I Tripod Mounting Socket ......................... pg. 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX Indications  
52EN  
Indications During Recording  
1
2
3
4
5
6
120M I N  
REC SP  
SET  
T
40  
7
^
&
444  
1
N I GHT 10  
x
8
0
+
02  
9
!
*
SVHS REC  
MWB  
a
PAUSE  
1X  
(
@
5
M I N  
)
1 / 2  
S
– – – – – – – – – –  
+
#
%
6
BR I GHT  
$
CONGRATULAT I ONS  
b
:
:
25. 12. 01  
11 45 18  
1 Tape Remaining Time .......................... pg. 44  
5 Tape Length Indicator .......................... pg. 12  
Blinks when a tape is about to reach its end.  
6 Zoom Indicator Bar .............................. pg. 16  
2 Recording Mode Indicator (SP/LP) ........ pg. 12  
Zoom Level Indicator  
Approximate Zoom Ratio  
3,8 Digital Effect Indicator ..................... pg. 21  
Displayed at 3 for approx. 2 seconds when  
the Digital Effect is switched from one mode to  
another by pressing DIGIFECT, then only the  
indicator remains at 8.  
3,9 Program AE Indicator .................... pg. 20  
Displayed at 3 for approx. 2 seconds when  
Program AE with special effects is switched  
from one mode to another by pressing P.AE.,  
then only the indicator remains at 9.  
7 Recording Indicator ............................. pg. 14  
! Picture Stabiliser Indicator.................... pg. 16  
@ Interval Time/Recording Time  
Indicator ........................................ pg. 26, 37  
# Bright Level Indicator ........................... pg. 14  
$ Instant Title Display ............................. pg. 25  
% Date/Time Display ............................... pg. 25  
^ Focus Indicator .................................... pg. 28  
& Exposure Control Level Counter ........... pg. 27  
* White Balance Mode Indicator............. pg. 29  
( S-VHS/S-VHS ET Recording Indicator ... pg. 10  
) RecordStandby Mode Indicator .......... pg. 14  
Night-Scope Indicator................... pg. 18  
Displayed at 3 for approx. 2 seconds when  
Night-Scope is switched from one mode to  
another by pressing NIGHT-SCOPE, then  
only the indicator remains at 9.  
3,0 Fade/Wipe-Standby Indicator .......... pg. 19  
Displayed at 3 for approx. 2 seconds when  
the Fade/Wipe is switched from one effect to  
another by pressing FADE/WIPE, then only the  
indicator remains at 0.  
4 Recording Format Indicator (S/S-ET) ..... pg. 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN53  
1 •  
: Cassette Indicator  
Indications During Playback  
2 3  
Displayed when a tape is loaded.  
w: Insert Editing Indicator .................. pg. 38  
Displayed during Insert Editing.  
1
4
5
6
7
2 TBC Indicator ...................................... pg. 31  
3 Playback Special Effect Indicator .......... pg. 31  
4 Recording Format Indicator (S/S-ET) ..... pg. 10  
5 Tape Counter ................................. pg. 31, 38  
6 Tape Running Indicator  
S ET  
4
:
:
TBC  
1
2 3 4 5  
MONOTONE  
AT  
4
: Playback  
3
2
6
: Fast-Forward/Shuttle Search  
: Rewind/Shuttle Search  
: Pause  
:
:
M 0 1 2 3 4  
e4  
: Audio Dubbing  
7 Tracking Indicator ................................ pg. 31  
8 Tape Counter ....................................... pg. 38  
Displayed only during Insert Editing.  
––––6––––  
+
VOLUME  
9 BRIGHT:  
9
8
Bright Level Indicator ........................ pg. 30  
VOLUME:  
Speaker Volume Indicator.................. pg. 30  
Warning Indications  
Indications  
Function  
Displays the battery remaining power.  
Remaining power level: high. It does not necessarily  
mean that the battery pack is fully charged.  
Remaining power level: exhausted  
As the battery power comes close to nil, the battery indicator  
power warning).  
blinks (battery  
When the battery power is exhausted, power turns off automatically.  
Blinks when no cassette is loaded, or when the Erase Protection tab is not in the position  
that allows recording.  
(pg. 13)  
Appears when the tape ends during recording, playback or fast-forward.  
Appears for 5 seconds after power is turned on if the lens cap is attached.  
(pg. 44)  
TAPE END  
LENS CAP  
These 2 warnings appear alternately every 3 seconds if condensation occurs. In this case,  
all functions except tape eject and power on/off are disabled. Remove the tape, turn the  
unit off (without removing the power supply), wait a few minutes for the warnings to  
clear, and turn it on again.  
CONDENSATION  
OPERATION PAUSED  
PLEASE WAIT  
These 2 warnings appear alternately every 3 seconds if dirt is detected on the heads  
during recording. In this case, use an optional cleaning cassette. If the warning remains  
after cleaning, consult your nearest JVC dealer.  
HEAD CLEANING  
REQUIRED  
USE CLEANING  
CASSETTE  
E01E06  
UNIT IN  
SAFEGUARD MODE  
REMOVE AND  
REATTACH BATTERY  
The error indications (E01 E06) show what type of malfunction has occured. If an  
error indication and warning appear, turn the unit off, remove the power supply (battery,  
etc.) and wait a few minutes for them to clear. When it does, you can resume using the  
camcorder. If the indication remains, consult your nearest JVC dealer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TERMS  
54EN  
Monotone Mode ........................................... pg. 21  
Mosaic Mode ................................................ pg. 21  
N
A
AC Adapter ............................................. pg. 5, 6, 7  
Animation Recording .............................. pg. 26, 37  
Audio Dubbing ............................................. pg. 39  
Auto Date Record ......................................... pg. 25  
Auto Focus.................................................... pg. 28  
Auto Shut Off .......................................... pg. 15, 30  
ND Effect Mode ............................................ pg. 20  
Nega/Posi Mode ........................................... pg. 21  
Night-Scope .................................................. pg. 18  
P
B
Picture Stabiliser ........................................... pg. 16  
Power Switch Position .................................. pg. 14  
Program AE With Special Effects ................... pg. 20  
Provided Accessories ...................................... pg. 4  
Battery Pack .......................................... pg. 6, 7, 45  
Brighten The Image ....................................... pg. 27  
Brighten The LCD Monitor ............................ pg. 14  
C
Q
Cassette Adapter ........................................... pg. 34  
Charge Marker ................................................ pg. 7  
Charging The Battery Pack .............................. pg. 6  
Classic Film Mode ........................................ pg. 21  
Clean The Camcorder ................................... pg. 47  
Connection To A VCR/TV ............................. pg. 32  
Contents ................................................ cover page  
Counter Memory ........................................... pg. 31  
Quick Review ............................................... pg. 17  
R
Recording Format ......................................... pg. 10  
Record-Standby ............................................ pg. 14  
Remote Control............................................. pg. 35  
Retake ........................................................... pg. 17  
Rewind The Tape .......................................... pg. 30  
S
D
Self-Recording .............................................. pg. 15  
Sepia Mode................................................... pg. 21  
Shoulder Strap Attachment .............................. pg. 8  
Shuttle Search ............................................... pg. 30  
Snapshot ....................................................... pg. 18  
Specifications................................................ pg. 55  
Sports Mode.................................................. pg. 20  
Still Playback ................................................ pg. 30  
Stretch Mode ................................................ pg. 21  
Strobe Mode ................................................. pg. 21  
Super VHS Expansion Technology................. pg. 10  
Darken The Image ........................................ pg. 27  
Darken The LCD Monitor ............................. pg. 14  
Date/Time Display ........................................ pg. 25  
Date/Time Settings .......................................... pg. 9  
Demonstration Mode ................................ pg. 4, 24  
Digital Effects ................................................ pg. 21  
Digital Zoom .......................................... pg. 16, 23  
Diopter Adjustment ......................................... pg. 8  
E
Electronic Fog Filter Mode ............................ pg. 20  
Erase Protection ............................................ pg. 13  
Exposure Control .......................................... pg. 27  
T
Tape Counter .......................................... pg. 31, 38  
Tape Dubbing ......................................... pg. 32, 33  
Tape Length Setting ....................................... pg. 12  
Tele Macro .................................................... pg. 24  
Time Base Corrector ..................................... pg. 31  
Time-Lapse Shooting ............................... pg. 26, 37  
Tracking ........................................................ pg. 31  
Tripod Mounting ............................................. pg. 8  
Twilight Mode ............................................... pg. 20  
F
Fade-In/Out .................................................. pg. 19  
Fast-Forward Tape ......................................... pg. 30  
G
Grip Adjustment.............................................. pg. 8  
H
High Speed Shutter Mode ............................. pg. 20  
I
U
Insert Editing ................................................. pg. 38  
Instant Titles .................................................. pg. 25  
Unload A Tape .............................................. pg. 13  
V
J
Video Echo Mode ......................................... pg. 21  
Video Light ................................................... pg. 17  
Viewfinder Adjustment .................................... pg. 8  
JLIP ID NO. ................................................... pg. 24  
Journalistic Shooting ..................................... pg. 15  
L
W
LCD monitor/Viewfinder, Indications ...... pg. 52, 53  
Load A Tape .................................................. pg. 13  
White Balance Adjustment ............................ pg. 29  
Wide Mode ................................................... pg. 23  
Wipe-In/Out.................................................. pg. 19  
M
Manual Focus ............................................... pg. 28  
Z
Menu Screen......................................... pg. 22 24  
Zooming ....................................................... pg. 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
EN55  
LCD monitor  
Speaker  
: 3" diagonally measured,  
Camcorder  
LCD panel/TFT active matrix  
system (GR-SXM607 only)  
2.5" diagonally measured,  
LCD panel/TFT active matrix  
system (GR-SXM55 only)  
General  
Format  
: S-VHS/VHS PAL standard  
Power source  
: DC 11 V  
(Using AC Adapter)  
DC 6 V  
(Using battery pack)  
: Monaural  
Connectors  
JLIP/EDIT  
: ø3.5 mm, 4-pole, mini-head  
jack (compatible with  
RC-5325 plug)  
Power consumption  
Viewfinder on  
LCD monitor on  
Video light*  
: 4.0 W  
: 4.5 W  
: 3.0 W  
Video  
: 1 V (p-p), 75 unbalanced,  
analogue output  
*GR-SXM607 only.  
(via Video output connector)  
: 300 mV (rms), 1 kanalogue  
Signal system  
: PAL-type  
Audio  
S-Video  
Video recording system  
output  
Luminance  
Colour  
: FM recording  
: Converted sub-carrier  
direct recording  
(via Audio output connector)  
: Y : 1 V (p-p), 75 ,  
analogue output  
C : 0.29 V (p-p), 75 ,  
analogue output  
Conforms to VHS standard  
Cassette  
:
/
cassette  
Tape speed  
SP  
LP  
: 23.39 mm/sec.  
: 11.70 mm/sec.  
AC Adapter AP-V10EG  
Power requirement : AC 110 V to 240 V`,  
Recording time (max.)  
SP  
LP  
50 Hz/60 Hz  
: 60 minutes  
: 120 minutes  
(with EC-60 cassette)  
Output  
: DC 11 V  
, 1 A  
Dimensions  
(W x H x D)  
: 59 mm x 31 mm x  
84 mm  
Operating  
temperature  
Operating humidity : 35% to 80%  
Storage temperature : –20°C to 50°C  
: 0°C to 40°C  
Weight  
: Approx. 140 g  
(not including Power Cord)  
Weight  
: Approx. 910 g  
(GR-SXM607 only)  
Approx. 900 g  
Optional Accessories  
Battery Packs BN-V12U, BN-V20U, BN-V400U  
(GR-SXM55 only)  
Compact S-VHS (  
Compact VHS (  
) Cassettes SE-C45/30  
Dimensions  
(W x H x D)  
: 200 mm x 112 mm x  
118 mm  
(with the LCD monitor closed  
and with the viewfinder full  
tilted downward)  
) Cassettes EC-60/45/30  
Remote Control Unit RM-V700U  
Active Carrying Bag CB-V7U  
Cassette Adapter C-P7U  
Pickup  
Lens  
: 1/4" format CCD  
: F1.6, f = 3.9 mm to 62.4 mm,  
16:1 power zoom lens with  
auto iris and macro control,  
filter diameter 40.5 mm  
Some accessories are not available in some areas.  
Please consult your nearest JVC dealer for details on  
accessories and their availability.  
Viewfinder  
: Electronic viewfinder with  
0.5" black/white CRT  
White balance  
adjustment  
: Auto/Manual adjustment  
Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject to change  
without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Heat Pump 670017 XXX C User Manual
Invacare Air Compressor Aerosol Compressors User Manual
JBL Speaker SRX812P User Manual
Jet Tools Automobile Parts JSJ 2 1 4XA User Manual
JVC DVD Player XV S500BK User Manual
Kenmore Network Router 15331242 User Manual
Kenwood Home Security System TH 25A User Manual
Kenwood MiniDisc Player BJV140Z User Manual
Kenwood Stereo Amplifier KAC 648 User Manual
Kicker Car Speaker DS350 User Manual