ENGLISH
PD-42DX
PD-35DX
PDP COLOUR TELEVISION
INSTRUCTIONS
1
LCT1373-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
WARNING
Always use the power cords which are supplied with the TV and receiver.
Some power cords are supplied with this TV. Use the power cord which best suits the area in which you live, and insert it into a correctly
earthed outlet.
Failure to use the supplied power cord or to insert it into a correctly earthed outlet may result in electric shocks.
WARNING
To ensure safety in an emergency such as an earthquake, and to prevent accidents, ensure that measures are taken to prevent the TV
dropping or falling over.
• Use the supplied screws to firmly attach the supplied hooks to the back of the TV, and use commercially available cord to fix the TV
to rigid components such as walls and columns.
E
/VID
TV
P
NU
ME
OK
Supplied hooks
CAUTION:
• Operate only from the power source specified (AC 110– 240 V, • When you are not using this unit for a long period of time, it is
50/60 Hz) on the unit.
recommended that you disconnect the power cord from the
• Avoid damaging the AC plug and power cord.
main outlet.
• The ambient temperature for using this unit is 0° to 40°C (32°
to 104°F). Using the unit outside of this range may lead to it not
working correctly or being broken.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Burn-in
A characteristic of Plasma Display Panels (PDPs) is that displaying the same image for a long time causes a part of the image to stay
on the screen (this is called phosphor burn-in).
Avoid burn-in as follows.
„ Do not display static images or characters for long periods of time.
While an image is displayed
With power OFF
19:03
19:03
Burn-in example
• Reduce CONTRAST and BRIGHT on the PICTURE SETTING menu (page 25) when viewing.
„ Do not view for long periods of time in the REGULAR mode (page 18).
Screen size is normally chosen to ensure that the picture is displayed on the entire screen. After viewing in the REGULAR mode in
which black bands may occur at the left and right of the screen, it is recommended to change to the PANORAMIC mode to display
the picture on the entire screen.
While an image is displayed
With power OFF
Burn-in example
„ Do not view for long periods of time using the PIP function (page 20) or MULTI-PICTURE function (page 21).
If Burn-in has occurred
If burn-in occurs, try the SNOW NOISE function (page 33). If burn-in is minimal it may gradually become less noticeable.
Note: Once burn-in occurs it will never disappear completely.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Point defects
PDPs use collections of fine pixels to display images. While there is no problem with more than 99.99% of these pixels, please
understand that a very small number of pixels may not light or may light all the time.
Do not install the TV near electronic equipment that is susceptible to electromagnetic waves
It may cause interference in images, sound, etc. In particular, keep video equipment away from this product.
Effect on infrared devices
There may be interference while using infrared devices such as infrared cordless headphones.
Avoid improper installation and never position the unit where good ventilation is impossible.
When installing this TV, distance recommendations must be maintained between the set and the wall, as well as inside a tightly enclosed
area or piece of furniture.
Keep to the minimum distance guidelines shown for safe operation.
200 mm
200 mm
150 mm
150 mm
Failure to take the following precautions may cause
damage to the television or remote control.
50 mm
DO NOT block the TV’s ventilation openings or holes.
(If the ventilation openings or holes are blocked by a newspaper or
cloth, etc., the heat may not be able to get out.)
DO NOT place anything on top of the TV.
(such as cosmetics or medicines, flower vases, potted plants, cups, etc.)
DO NOT allow objects or liquid into the cabinet openings.
(If water or liquid is allowed to enter this equipment, fire or electric
shock may be caused.)
100 mm
100 mm
100 mm
100 mm
100 mm
DO NOT place any naked flame sources, such as lighted candles, on
the TV.
The surface of the TV screen is easily damaged. Be very careful with it when handling the TV.
Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully.
Never use any cleaner or detergent on it.
If there is a fault, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover.
D.I.S.T. demonstration
To start the D.I.S.T. demonstration:
Press the a button to display the MENU (main menu). Then press the yellow button.
A picture split in two (D.I.S.T. turned on and D.I.S.T. turned off) will appear on the screen.
To quit the D.I.S.T. demonstration:
Press the yellow button, b button, P p buttons or any of the number buttons.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Checking contents of packages............5
Setting up your TV..................................6
PICTURE FEATURES...........................26
DIGITAL VNR.................................................. 26
Super DigiPure................................................ 26
COLOUR SYSTEM......................................... 27
PULL DOWN................................................... 27
4:3 AUTO ASPECT......................................... 27
COLOUR MANAGEMENT.............................. 27
PIP .................................................................. 28
Mounting the front speakers, and preparing the
subwoofer .......................................................6
Installation..........................................................7
Putting the batteries into the Remote control.....7
Connections............................................8
Connection diagram...........................................8
Connecting the front speakers and subwoofer ....10
Connecting the TV and receiver ......................11
Connecting the aerial and VCR .......................12
Connecting the power cord to the AC outlet ......13
SOUND SETTING .................................29
STEREO / I • II ................................................ 29
Sound Adjustment........................................... 29
SPEAKER ....................................................... 29
BBE................................................................. 29
CINEMA SURROUND .................................... 29
SUBWOOFER................................................. 29
HEADPHONE ................................................. 29
Initial settings .......................................14
TV buttons and functions ....................15
Turn the TV on from standby mode .................15
Choose a TV channel ......................................15
Watch images from external devices...............15
Adjust the volume ............................................15
Using the headphone.......................................15
Using the Menu................................................15
VIDEO SETTING ...................................31
ID LIST............................................................ 31
FEATURES............................................32
SLEEP TIMER ................................................ 32
BLUE BACK.................................................... 32
CHANNEL GUARD......................................... 32
SNOW NOISE................................................. 33
Remote control buttons and
functions............................................16
Turn the TV on or off from standby mode........16
Choose a TV channel ......................................16
Adjust the volume ............................................17
Watch images from external devices...............17
ZOOM function.................................................18
CINEMA SURROUND function........................19
Displaying the current time ..............................19
Return to TV channel instantly.........................19
Using the FREEZE function.............................19
Using the PIP function .....................................20
Using the MULTI-PICTURE function ...............21
Operating a JVC brand VCR or DVD player....21
INSTALL................................................34
LANGUAGE .................................................... 34
AUTO PROGRAM........................................... 34
EDIT/MANUAL................................................ 34
Changing the TELETEXT LANGUAGE setting... 37
Additional preparation.........................38
Connecting the external devices..................... 38
CH/CC numbers ...................................40
Troubleshooting...................................41
Specifications.......................................43
Teletext function...................................22
Basic operation ................................................22
Using the List Mode .........................................22
Hold..................................................................22
Sub-page .........................................................23
Reveal..............................................................23
Size..................................................................23
Index ................................................................23
Cancel..............................................................23
Using the TV’s menu............................24
Basic operation ................................................24
PICTURE SETTING ...............................25
PICTURE MODE .............................................25
Picture Adjustment...........................................25
WHITE BALANCE............................................25
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking contents of packages
The TV and components are supplied in three packages.
Check that all components are present. Contact your retailer immediately if any components are missing.
„ TV
System cable
Remote control
TV
Power cord
AAA/R03-size batteries
(used to check operation)
Mounting screw × 2
Hook × 2
Ferrite core × 2
„ Receiver
Ferrite core × 2
Receiver
Power cord
„ Speakers
Speaker cords (for front speakers)
(cord approximately 1.2 m in
length × 2)
Speaker cord (for subwoofer)
(cord approximately 3 m in
length × 1)
Left and right front speakers
(DD speakers)
Subwoofer
Rubber foot for subwoofer × 4
Mounting screw × 6
(only for PD-35DX)
Cord clamp × 3
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV
• Use the stand designed for this TV. For details of how to attach the stand, refer to the stand users manual.
• Ensure that the TV is installed on the wall by a skilled installer.
Mounting the front speakers, and preparing the subwoofer
„ Mounting the front speakers
Mount the supplied the DD speakers on the left and right of the TV.
• When using the stand designed for the TV, mount the TV on the stand beforehand.
• Place a soft cloth on the floor for protection before laying the TV down to attach the front speakers.
<PD-42DX>
1 Loosen the speaker mounting
screws at the back of the TV
Using a Philips screwdriver, loosen
the speaker mounting screws (three
each side) until the heads project
approximately 3 mm.
2 Attach the front speakers to
the back of the TV
3 Lock the front speakers in
place
Place the heads of the screws in the
screw holes in the front speaker
mounting fixture, and slide the
speaker downwards.
Tighten the screws to lock the
mounting fixture in place using a
Philips screwdriver.
<PD-35DX>
1 Attach the speaker mounting
screws to the back of the TV
Using a Philips screwdriver, tighten
the speaker mounting screws (three
each side) until approximately
3 mm is left protruding.
2 Attach the front speakers to
the back of the TV
3 Lock the front speakers in
place
Place the heads of the screws in the
screw holes in the front speaker
mounting fixture, and slide the
speaker downwards.
Tighten the screws to lock the
mounting fixture in place using a
Philips screwdriver.
Y
INPUT
STEM
DISPLA
NECT TO
Y
INP
UT
PLA
INPU
T
CABLE
Y
DISPLA
CT TO SY
DIS
LE
C
ABLE
SYSTEM CAB
M
SYSTE
NECT TO
CONNE
CON
CON
• Attach only the supplied DD speakers to the TV.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV
„ Preparing the subwoofer
Either stand the subwoofer vertically or lay it down on its side, peel the
paper from the supplied rubber feet, and stick the feet in the four corners on
the surface to be used as the base. The rubber feet prevent slipping and
resonance, and also protect the speaker cord.
Subwoofer
Rubber feet
Mounting example:
Subwoofer to be used
lying down
• The subwoofer is not designed to withstand electromagnetic fields. Furthermore, it vibrates in operation and should therefore
not be installed near equipment such as VCR, or equipment where it will be subject to vibration or electromagnetic fields.
Installation
Cautions for installation
• Do not tilt the TV towards the left or right, or towards the back.
• Install the TV in a corner on a wall or on the floor so as to keep cords out of the way.
• Grip the TV (not the front speakers) when moving or installing it after mounting the front speakers to the TV.
• The TV will generate a slight amount of heat during operation. Ensure that sufficient space is available around the TV to allow
satisfactory cooling.
Above the TV:
200 mm or more
150 mm or more
50 mm or more
Left and right of the TV:
Behind the TV:
Above, behind, left and right of the receiver: 100 mm or more
Installation example:
IDE
TV/V
P
U
MEN
OK
Putting the batteries into the Remote control
Use two AAA/R03 dry cell batteries.
Insert the batteries from the - end, making sure the + and - polarities are correct.
• Follow the warnings printed on the batteries.
• Battery life is about six months to one year, depending on your frequency of use.
• The batteries we supply are only for setting up and testing your TV, please replace them as soon as necessary.
• If the remote control does not work properly, replace the batteries.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Caution
• Turn off all equipment (including the TV) before connecting anything.
Connection diagram
<PD-42DX>
AC INPUT
110-240V
Cable supplied with TV
• Refer to page 13 for connection
details.
TV (back)
Right front
speaker
Left front
speaker
DISPLAY INPUT
CONNECT TO SYSTEM CABLE
FRONT
SPEAKER OUT
R
FRONT
SPEAKER OUT
L
SUBWOOFER OUT
MAX OUT
IMPEDANCE
:
:
10W
6
MAX OUT
IMPEDANCE
:
:
10W
6
MAX OUT
:
1
5
W
I
M
P
E
D
A
N
C
E
:
4
AC INPUT
110-240V
DISPLAY
INPUT
CONNECT TO SYSTEM CABLE
Supplied speaker cord
(approximately 1.2 m
in length)
FRNT
SPEAKER OUT
R
FRONT
SPEAKER OUT
L
SUBWOOFER OUT
Supplied speaker cord
(approximately 1.2 m
in length)
MAX OUT
IMPEDANCE : 6
: 10W
MAX OUT
IMPEDANCE : 6
: 10W
MAX OUT : 15W IMPEDANCE : 4
Supplied system cable
Supplied speaker cord
(approximately 3 m in length)
Subwoofer
(back)
Receiver (back)
IN
OUT
AUDIO
AUDIO
R
VIDEO S-VIDEO
VIDEO
DISPLAY OUT
L/MONO
R
L
VIDEO-1
VIDEO-2
L
R
R
L
L
COMPONENT(VIDEO-4)
Connecting antenna and other equipment
• Refer to page 12 for connection details.
R
AUDIO
OUT
Pr
Pb
Y
R-AUDIO-L
VIDEO-3
AC IN
-240V
110
Cable supplied with receiver
• Refer to page 13 for connection details.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
<PD-35DX>
AC INPUT
110-240V
Cable supplied with TV
• Refer to page 13 for connection
details.
Left front
speaker
TV (back)
Right front
speaker
DISPLAY INPUT
CONNECT TO SYSTEM CABLE
DISPLAY
INPUT
CONNECT TO SYSTEM CABLE
AC INPUT
110-240V
FRONT
AX U
FRONT
T
SPEAKER OUT
SPEAKER OUT
:4
R
L
MAX OUT
IMPEDANCE
:
:
10W
6
MAX OUT
IMPEDANCE
:
:
10W
6
Supplied speaker cord
(approximately 1.2 m
in length)
FRNT
SPEAKER OUT
R
:4
FRNT
SPEAKER OUT
L
Supplied speaker cord
(approximately 1.2 m
in length)
MAX OUT
IMPEDANCE : 6
: 10W
MAX OUT
IMPEDANCE : 6
: 10W
Supplied system cable
Supplied speaker cord
(approximately 3 m in length)
Subwoofer
(back)
Receiver (back)
IN
OUT
AUDIO
AUDIO
R
VIDEO S-VIDEO
VIDEO
DISPLAY OUT
L/MONO
R
L
VIDEO-1
VIDEO-2
L
R
R
L
L
COMPONENT(VIDEO-4)
R
Connecting antenna and other equipment
• Refer to page 12 for connection details.
AUDIO
OUT
Pr
Pb
Y
R-AUDIO-L
VIDEO-3
AC IN
110 240V
-
Cable supplied with receiver
• Refer to page 13 for connection
details.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting the front speakers and subwoofer
Use the supplied speaker cords to connect the speakers to the speaker terminals at the back of the TV.
„ Connecting the speaker cord to the front speaker terminal
Connect using the supplied front speaker cords (approximately 1.2 m in length).
1 Press the spring-loaded speaker input terminal
lever in the direction of the arrow
2 Press the core of the cord into the terminal and
lock it in place by releasing the lever
• Connect the cord with the black stripe to the - terminal.
The stereo sensation and sound quality will be impaired if the polarity (+, -) of the speaker cords is reversed.
„ Connecting the speaker cord to the subwoofer terminal
Connect using the supplied subwoofer speaker cord (approximately 3 m in length).
1 Press the spring-loaded subwoofer speaker
input terminal lever in the direction of the arrow
2 Press the core of the cord into the terminal and
lock it in place by releasing the lever
• Connect the cord with the black stripe to the - terminal.
The stereo sensation and sound quality will be impaired if the polarity (+, -) of the speaker cords is reversed.
„ Connecting the speaker cord to the speaker terminal at the back of the TV
Connect the speaker cord from the right of the TV (when viewed from the front) to the speaker terminal R at the back of the TV.
Connect the speaker cord from the left of the TV (when viewed from the front) to the speaker terminal L at the back of the TV.
Connect the speaker cord from the subwoofer to the subwoofer terminal at the back of the TV.
1 Press the speaker terminal
lever on the TV in the direction
of the arrow
2 Press the core of the cord into
the terminal
3 Push the terminal lever
upwards
FR
ONT
FR
FR
ONT
ONT
SPEAKER OUT
R
SPEAKER OUT
R
SPEAKER OUT
R
MAX OUT
MAX OUT
MAX OUT
IMPED
:
IMPED
10W
6
:
IMPED
10W
6
NCE
ANCE :
ANCE :
• Connect the cord with the black stripe to the - terminal.
The stereo sensation and sound quality will be impaired if the polarity (+, -) of the speaker cords is reversed.
• The front speakers (DD speakers) and the subwoofer are for use only with this TV, and may be damaged if they are connected to
another amplifier.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
„ Bundling speaker cords
Use the supplied cord clamps to bundle the connected speaker cords together.
Cord clamp
Speaker cords
• Peel the paper from the back of the cord clamp and attach it at the desired location. To ensure that the cord clamp is firmly
attached, wait a few minutes before inserting the speaker cords into the clamp.
• Ensure that the cord clamp is not attached above a ventilation hole at the back of the TV.
Connecting the TV and receiver
Use the supplied system cable to connect the TV to the receiver.
The two connectors are of different shapes.
Ensure that the pins on connector 1 are oriented correctly, press the connector into the socket, and tighten the screws at left and
right to lock it in place.
Press connector 2 firmly into place until it is locked.
<PD-42DX>
<PD-35DX>
2
1
Disconnecting the system cable
Release connector 1 by unscrewing the screws at left and right and removing it from the socket.
Release connector 2 by removing it from the socket while pressing the release bottoms on either side.
<PD-42DX>
<PD-35DX>
1
2
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting the aerial and VCR
Fig.A
• Aerial cable is not supplied. Use a good quality 75-ohm
coaxial cable.
• Read the manual that came with the VCR before
connecting.
Back of the receiver
If not connecting a VCR (see fig.A):
Connect an aerial cable to the aerial socket on this
receiver.
A
R
VIDEO-1
R
VIDEO-2
R
If connecting a VCR (see fig.B):
VIDEO-3
1 Connect the aerial cable to the aerial input
socket on the VCR, and connect the VCR and
receiver with another aerial cable
Fig.B
2 Connect the VCR’s VIDEO OUT (video output)
terminal and the receiver’s VIDEO terminal with
a video cable
Back of the receiver
To connect a VCR to the receiver with an S-VIDEO
cable:
IN
AUDIO
O
VIDEO S-VIDEO
AUDIO
R
R
R
R
L/MONO
VIDEO-1
VIDEO-2
Connect the VCR’s S-VIDEO OUT (S-VIDEO output)
terminal and receiver’s “S” terminal with an S-VIDEO
cable A, instead of connecting with a video cable.
Note that the connection with a video cable will be
ignored in case you connect a VCR to the receiver with
both video cable and S-VIDEO cable.
L
L
COMPONENT
Pr
P
R-AUDIO-L
VIDEO-3
A
3 Connect the VCR’s VIDEO OUT (audio L/R
output) terminals and the receiver’s AUDIO
terminals (L/MONO and R) with an audio cable
1
3
2
• If the VCR’s audio output is in mono, connect the
VCR’s AUDIO OUT (audio output) terminal and the
receiver’s AUDIO L/MONO terminal with an audio
cable.
1
• To connect additional external devices, please see
“Connecting the external devices” on page 38.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
„ Receiver rear
Connecting the power cord to the AC
outlet
Insert the AC plugs on the power cords from the TV and
receiver into AC outlets.
IN
AUDIO
OUT
AUDIO
VIDEO S-VIDEO
VIDEO
DISPLAY OUT
Caution
R
R
R
L/MONO
R
L
VIDEO-1
L
L
L
COMPONENT(VIDEO-4)
• Operate only from the power source specified (AC 110
– 240 V, 50/60 Hz) on the unit.
VIDEO-2
VIDEO-3
R
AUDIO
OUT
Pr
Pb
Y
R-AUDIO-L
AC IN
110 240V
-
• Failure to use the supplied power cord or to insert it
into a correctly earthed outlet may result in electric
shocks.
Use the supplied power cord which best suits the area in
which you live.
1 Aerial socket (page 12)
2 VIDEO terminals (pages 12, 31, 38)
VIDEO-1 terminal, VIDEO-2 terminal, VIDEO-3
terminal, COMPONENT (VIDEO-4) terminal
3 OUT terminal (page 39)
4 AUDIO OUT terminal (page 39)
5 DISPLAY OUT terminal (page 11)
6 AC INLET (page 13)
Attaching the ferrite cores
Attach ferrite cores to the power cord.
Using the power cord without ferrite cores may lead to
noise (interference).
Open the ferrite core, insert the power cord and close the
ferrite core.
Attach a ferrite core to each end of the power cord.
Ferrite core
Power cord
Supplied ferrite cores
Supplied ferrite cores
Supplied ferrite cores
Back of the TV
Power cord
AC INLET
AC INLET
AC IN
110 - 240V
Power cord
Back of the receiver
Insert the AC plug into a correctly earthed outlet.
The receiver power lamp lights red, and the receiver is in
the standby mode, when the AC plug on the power cord is
connected to an AC outlet.
• Remove the AC plug from the outlet to completely
disconnect the TV from the power supply.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
When the TV is first turned on, it enters the initial setting
mode, and the JVC logo is displayed. Follow the
instructions on the on-screen display to make the initial
settings.
3 Press the 5 and 6 buttons to choose
ENGLISH. Then press the a button
English is set for the on-screen display description. The
TELETEXT LANGUAGE menu appears as a sub-menu
of the AUTO PROGRAM function.
1 Press the # button on the remote control
The receiver power lamp changes from red to green.
After a short interval the TV power lamp lights green
and the JVC logo is displayed.
4 Press the 6 buttons to choose the teletext
language group that corresponds to language
of teletext programme that you want to watch
• Check that the AC plugs on the power cords from the
TV and receiver are connected to AC outlets.
Group
Languages
GROUP-1 Turkish, Hungarian, English, German,
French, Italian, Spanish, Portuguese,
Greek, Swedish, Finnish
Display front
<PD-42DX>
<PD-35DX>
Remote control sensor
Power lamp
GROUP-2 Polish, Serbian, Croatian, Slovenian,
Czech, Slovak, Rumanian, Hungarian,
German, French, Italian, Swedish,
Finnish
GROUP-3 Russian, Bulgarian, Lettish, Lithuanian,
Estonian, Ukrainian, Serbian, Croatian,
Slovenian, Czech, Slovak, English,
German
Power lamp
Remote control
sensor
GROUP-4 Arabic, Czech, Slovak. Hungarian,
English, German, French, Italian,
Spanish, Portuguese, Swedish, Finnish
Receiver front
5 Press the a button to start the AUTO
PROGRAM function
The AUTO PROGRAM menu appears and received TV
channels are automatically registered in the Programme
numbers (PR).
• To cancel the AUTO PROGRAM function:
Press the b button.
A button
Power lamp
• If the power lamp stays red and does not change to
green:
Your TV is in the standby mode. Press the #
(Standby) button again to turn your TV on.
• The JVC logo does not appear when your TV has
been turned on once. In this case, use the
“LANGUAGE” and “AUTO PROGRAM” functions
to make the initial settings. For details, see
“INSTALL” on page 34.
After the TV channels have been registered in
the Programme numbers (PR), the EDIT menu
appears
• You can proceed to edit the Programme numbers
(PR) using the EDIT/MANUAL function. For details,
see “EDIT/MANUAL” on page 34.
2 Press the a button
• If you do not need to use the EDIT/MANUAL
function, go to the next step.
The LANGUAGE menu appears.
6 Press the a button
14
Download from Www.Somanuals.com. All Manuals Search And Download.
TV buttons and functions
Display front
<PD-42DX>
Receiver front
How to open the cover
S
VIDEO
AUDIO
L
R
IN(VIDEO-5)
Refer to the pages in parentheses for details.
1 Headphone jack (mini jack) (page 38)
2 VIDEO-5 terminal (pages 31, 38)
3 A (Stand by) button (page 15)
4 Power lamp (page 14)
P
O
E
ID
/V
V
U
N
E
M
T
K
O
Turn the TV on from standby mode
Press the A button or P p buttons to turn the TV
on from standby mode
• Check that the AC plugs on the power cords from the TV
and receiver are connected to correctly AC outlets.
<PD-35DX>
Choose a TV channel
Press the P p buttons to choose a programme
number (PR) or an VIDEO terminal
Watch images from external devices
Press the VIDEO button to choose a VIDEO
terminal
TV mode
VIDEO modes
Last
Programme
number
or
or
or
P
EO
ID
/V
TV
ENU
M
K
O
• The leading character is changed from V to S (e.g. V2 is
changed to S2) when VIDEO-2, VIDEO-3, or VIDEO-5
are connected to the S terminal.
Adjust the volume
Press the q buttons
The volume level indicator appears.
Refer to the pages in parentheses for details.
1 Power lamp (page 14)
2 Remote control sensor
3 MENU/OK button (pages 15, 24)
4 P p buttons (page 15)
5 r (Volume) q buttons (page 15)
6 TV/VIDEO button (page 15)
7 A (Stand by) button (page 15)
Using the headphone
• The headphone volume is adjusted with the
“HEADPHONE” menu (see page 29).
Using the Menu
Use the MENU/OK button.
Refer to“Using the TV’s menu” (see page 24) for details of
using the menu.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and functions
1 Muting button
2 Number buttons
3 c button
4 SURROUND button
5 Information button
6 b button
7 5 buttons
8 A (Stand by) button
9 Colour buttons
0 a button
- 6 buttons
= VCR/DVD/Teletext control button
~ VCR P DVD switch
! g (Text) button
@ P button
1
4
7
2
5
8
0
3
6
9
# VIDEO button
ZOOM SURROUND VIDEO
PIP
$ F button
% U p button
^ MULTI button
MENU
OK
P
& S button
TV
Turn the TV on or off from standby
mode
Press the # (Standby) button to turn the TV on or
off.
P
When the TV is turned on, the power lamp changes from
red to green.
• The power can be turned on by pressing the b button,
6 buttons or Number buttons.
• Check that the AC plugs on the power cords from the TV
and receiver are connected to AC outlets.
Choose a TV channel
„ Use the number buttons:
Enter the programme number (PR) of the
channel using the number buttons.
Example:
• PR 6 → press 6
• PR 12 → press 1 and 2
„ Use the 6 buttons:
Press the 6 buttons to choose the
programme number (PR) you want.
TV
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and functions
„ Use the PR LIST:
Watch images from external devices
1 Press the
PR LIST
(Information) button to display the
h
h
„ Use the o button:
Press the o button to choose a VIDEO
terminal.
Pressing the
as follows:
(Information) button changes the display
TV mode
VIDEO modes
Programme
numbers
PR 1 – PR 99
or
or
No indication
or
• The leading character is changed from V to S (eg V2 is
changed to S2) when VIDEO-2, VIDEO-3, or VIDEO-5
are connected to the S terminal.
2 Press the 5 and 6 buttons to choose a
Programme number (PR). Then press the a
button
„ Use the VIDEO button:
Press the VIDEO button to choose a VIDEO
terminal.
• For Programme numbers (PR) with the CHANNEL
GUARD function set, the n (CHANNEL GUARD)
mark is displayed next to the Programme number
(PR) in the PR LIST.
• You cannot use the 6 buttons to choose a
Programme number (PR) with the CHANNEL
GUARD function set.
• Even if you try to choose a Programme number (PR)
with the CHANNEL GUARD function set, the n
(CHANNEL GUARD) mark will appear, and you
cannot watch the TV channel. To watch the TV
channel, see “CHANNEL GUARD” on page 32.
TV mode
VIDEO modes
Last
Programme
number
or
or
or
„ Use the 6 buttons:
• If you do not have a clear picture or no colour
appears, follow the operation procedure “COLOUR
SYSTEM” (see page 27).
• The sound system is chosen automatically. However,
if you cannot hear the sound normally even when the
picture appears normally, choose the sound system
manually. Refer to the MANUAL on the “INSTALL”
menu (see page 34) for details of choosing the sound
system.
Press the 6 buttons to choose a VIDEO
terminal.
„ Use the PR LIST:
1 Press the
PR LIST
(Information) button to display the
h
2 Press the 5 and 6 buttons to choose a
VIDEO terminal. Then press the a button
• The VIDEO terminals are registered after the
Programme number PR 99.
Adjust the volume
• If you do not have a clear picture or no colour
appears, change the colour system manually. See
“COLOUR SYSTEM” on page 27.
Press the 5 buttons to adjust the volume.
The Volume indicator appears and the volume changes as
you press the 5 buttons.
• The headphone volume is adjusted with the
“HEADPHONE” menu (see page 29).
To return to a TV channel:
Press the b button, the 6 buttons or the Number
buttons.
„ Muting the sound
Press the (muting) button to turn off the
l
sound.
Pressing the (muting) button again restores the previous
l
volume level.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and functions
To use the Programme number PR 0 (AV):
When the TV and VCR are connected only by the Aerial
cable, choosing the Programme number PR 0 (AV) allows
you to view images from the VCR. Set the VCR RF channel
to the Programme number PR 0 (AV) manually. For details,
see “EDIT/MANUAL” on page 34.
ZOOM function
You can change the screen size according to the picture
aspect ratio. Choose the optimum one from the following
ZOOM modes.
AUTO:
Pressing the o button changes the choice as follows:
When a WSS (Wide Screen Signalling) signal, which shows
the aspect ratio of the picture, is included in the broadcast
signal or the signal from an external device, the TV
automatically changes the ZOOM mode to 16:9 ZOOM
mode or FULL mode according to the WSS signal.
If a WSS signal is not included, the picture is displayed in
accordance with the ZOOM mode set with the 4:3 AUTO
ASPECT function.
VIDEO modes
TV mode
Programme
numbers
PR 0
PR 1 – PR 99
or
or
• For details of the 4:3 AUTO ASPECT function, see “4:3
AUTO ASPECT” on page 27.
or
• When the AUTO(WSS) mode does not function
correctly due to poor WSS signal quality or when you
want to change the ZOOM mode, press the c
button and change to another ZOOM mode.
• The VCR RF channel is sent as the RF signal from the
VCR.
• Also refer to your VCR instruction manual.
REGULAR:
Use to view a normal picture (4:3 aspect ratio) as its
original size is.
PANORAMIC:
This mode stretches the left and right sides of a normal
picture (4:3 Aspect Ratio) to fill the screen, without making
the picture appear unnatural.
• The top and bottom of the picture are slightly cut off.
14:9 ZOOM:
This mode zooms up the Wide Picture (14:9 Aspect Ratio)
to the upper and lower limits of the screen.
16:9 ZOOM:
This mode zooms up the Wide Picture (16:9 Aspect Ratio)
to the full screen.
16:9 ZOOM SUBTITLE:
This mode zooms up the Wide Picture (16:9 Aspect Ratio)
with subtitles to the full screen.
FULL:
This mode uniformly stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fill the wide TV screen.
Use for pictures with a 16:9 aspect ratio that have been
squeezed into a normal picture (4:3 aspect ratio), you can
restore their original dimensions.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and functions
„ Choose the ZOOM mode
Displaying the current time
1 Press the c button to display the ZOOM
You can display the Current Time on the screen.
menu
Press the
(Information) button to display the
h
current time
Pressing the
follows:
(Information) button changes the display as
h
• The c button does not work in the twin
pictures mode.
2 Press the 6 buttons to choose a ZOOM mode.
Then press the a button
No indication
The picture expands and the chosen ZOOM mode is
displayed in about 5 seconds.
• This TV uses teletext data to set the current time. If the
TV has not received a TV channel that has teletext
programmes since it was turned on, the time display is
blank. To view the current time, choose a TV channel
that has teletext programmes.
„ Adjusting the visible area of the picture
If subtitles or the top (or bottom) of the picture are cut off,
adjust the visible area of the picture manually.
1 Press the c button
• When watching videos, an incorrect current time is
sometimes displayed.
The ZOOM menu appears.
2 Press the a button to display the ZOOM mode
Return to TV channel instantly
indication
Indicator is displayed.
You can return to a TV channel instantly.
Press the b button
The TV returns to the TV mode and a TV channel appears.
3 While it is displayed, press the 6 buttons to
adjust the visible area vertically
• You cannot adjust the visible area in REGULAR or
FULL mode.
Using the FREEZE function
You can view the current programme as a still picture.
1 Press the F button
CINEMA SURROUND function
The still picture of the current picture will appear.
You can enjoy sounds with a wider ambience.
current
programme
still picture
Press the SURROUND button to turn the CINEMA
SURROUND function on or off
D0056
• The CINEMA SURROUND function does not work
properly with mono sound.
• The CINEMA SURROUND function can be also turned
on or off by using the SOUND SETTING menu. For
details, see “CINEMA SURROUND” on page 29.
To cancel the FREEZE function:
Press the F button, the 6 buttons or the
number buttons.
• The FREEZE function does not work while a sub-
picture is displayed.
• The still picture cannot be output from the TV.
• The FREEZE function is cleared if no operation is
performed for approximately one minute.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and functions
Cancelling the PIP function:
Press the P button or b button.
Using the PIP function
You can view two pictures (Main-picture and sub-picture).
Two different TV programmes can be watched at the same
time, or a TV programme and a video programme from an
external device can be watched at the same time.
• If the main-picture signal is poor, the quality of the
sub-picture may also be poor.
• If the pictures have different standards, the top and
bottom of one of them may be missing.
• If an external device is operated, the sub-picture may
disappear. If this happens, press the P button again
to redisplay the sub-picture.
1 Press the P button
Pressing the P button changes the PIP mode as
follows:
• You cannot view a scrambled channel in the sub-
picture. If the S button is pressed when viewing
a scrambled channel in the main-picture using an
external decoder, the channel you have been viewing
in the sub-picture will appear in both the main-picture
and sub-picture.
Twin pictures mode
Main-
picture
Sub-
picture
• The ZOOM function does not work in the twin-
picture mode.
• Do not press the S button while you are
recording the TV output on the VCR. If you do, the
TV output signal will change.
• The BLUE BACK function does not work in the twin
picture mode or the picture-in-picture mode.
• A progressive-scanning picture cannot be displayed
as the sub-picture.
Picture in picture mode
Main-
picture
Sub-
picture
Pay attention to the following.
Cancel the PIP function
- When the VIDEO-4 picture is a progressive-
scanning picture, you cannot choose VIDEO-4
with the U p buttons.
Main-
picture
- When the VIDEO-4 picture signal is changed to a
progressive-scanning picture while the VIDEO-4
picture is displayed as the sub-picture, the PIP
function is cancelled.
D0057
- The pictures cannot be swapped when a
progressive-scanning picture from VIDEO-4 is
being displayed as the main picture.
2 Press the U p buttons to change the
sub-picture to the picture from another TV
channel or another VIDEO terminal
• The sub-picture cannot be output from the TV.
Listening to the sound of the sub-picture:
You can listen to the sound of the sub-picture with the
headphones while listening to the sound of the main-
picture from the TV speakers.
For details, see “HEADPHONE” on page 29.
• The sub-picture sound is monaural.
Changing the position of the sub-picture:
You can choose one of four positions.
For details, see “PIP POSITION:” on page 28.
Swapping the main-picture and sub-picture:
Press the S button.
The main-picture and sub-picture will be swapped.
A
B
A
B
D0051
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and functions
Using the MULTI-PICTURE function
Operating a JVC brand VCR or DVD
player
You can display multi-pictures that enable you to easily find
a program you want to view.
You can operate a JVC brand VCR or DVD player.
Pressing the button having the same appearance as the
original remote control button of a device makes the
function work in the same way as the original remote
control.
1 Press the MULTI button to display multi-
pictures
The channels are displayed in the channel number order.
The multi-pictures will appear in one of the two multi-
picture modes.
1 Set the VCR P DVD Switch to the VCR or DVD
position
12-pictures multi:
VCR:
Still pictures
When you are operating the VCR, set the switch to the
VCR position.
DVD:
Moving picture
When you are operating the DVD player, set the switch
to the DVD position.
D0058-EN
4-pictures multi:
2 Press the VCR/DVD Control Button to control
your VCR or DVD player
Still pictures
• If your device is not made by JVC, these buttons
cannot be used.
Main picture
• Even if your device is made by JVC, some of these
buttons or any one of the buttons may not work,
depending on the device.
• You can use the p buttons to choose a TV channel.
The VCR will receive or choose the chapter the DVD
player plays back.
• Some DVD player models use the p buttons for
both operating of Fast forward/backward functions
and choosing the chapter. In this case, the 253
buttons do not work.
Moving picture
D0059-EN
• To display the next multi-pictures, press the MULTI
button.
2 Press the U p buttons to choose the
screen you want to see
The chosen picture changes to a moving picture.
3 Press the a button
The multi-pictures disappear and the chosen picture
appears.
Changing the multi-picture mode:
See “MULTI-PICTURE:” on page 28.
Cancelling the multi-pictures:
Press the b button, the 6 buttons, the number
buttons or the a button.
• Pictures from external devices cannot be displayed in
the 12-pictures multi mode.
• In the 4-pictures multi mode, the picture from
external devices can only be displayed as the main
picture.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext function
Using the List Mode
You can store the numbers of your favourite teletext pages
in memory and call them up quickly using the colour
buttons.
„ To store the page numbers:
1 Press M button to engage the List mode
The stored page numbers are displayed at the bottom of
the screen.
2 Press a Colour button to choose a position.
Then press the Number buttons to enter the
page number
Basic operation
1 Choose a TV channel with a teletext broadcast
2 Set the VCR P DVD switch to the
(Text)
P
position
3 Press and hold down P button
The four page numbers blink white to indicate that they
are stored in memory.
3 Press g (Text) button to display the teletext
Pressing g (Text) button changes the mode as follows:
„ To call up a stored page:
1 Press the M button to engage the List
mode
2 Press a colour button to which a page has been
assigned
TV mode
TV and text mode
To exit the List mode:
Press the M button again.
Text mode
D1043
Hold
4 Choose a teletext page by pressing the 6
You can hold a teletext page on the screen for as long as
you want, even while several other teletext pages are being
received.
buttons, Number buttons or Colour buttons
To return to the TV mode:
Press the b button or g (Text) button.
Press the N button
• If you have trouble receiving teletext broadcasts,
consult your local dealer or the teletext station.
• The ZOOM function will not operate in the TV and
text mode or Text mode.
Hold indication
• No menu operations are possible when viewing a
teletext programme.
To cancel the Hold function:
Press N button again.
• Language display depends on the country which was
set on the TELETEXT LANGUAGE menu. If
characters on a Teletext programme do not appear
properly, change the TELETEXT LANGUAGE
Setting to other country’s. For detail, “Changing the
TELETEXT LANGUAGE setting” on page 37.
• The Hold function is cleared if no operation is performed
for approximately one minute.
When viewing a teletext programme, the text
periodically moves a little at a time towards either the
top or bottom of the screen. This is to prevent burn-in
and is not a malfunction.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext function
Sub-page
Cancel
Some teletext pages include sub-pages that are
automatically displayed.
You can hold any sub-page, or view it at any time.
You can search for a teletext page while watching TV.
1 Press the Number button to enter a page
number, or press a Colour button
The TV searches for a teletext page.
1 Press the O button to operate the Sub-
page function
Sub-page numbers are displayed at the left of the screen.
2 Press S button
The TV programme appears. When the TV finds the
teletext page, its page number appears in the upper left
of the screen.
Colour*
Yellow
White
Meaning of sub-page number
Currently being displayed.
Can be displayed.
3 Press S button to return to a teletext
page when the page number is on the screen
• The TV mode cannot be resumed even by pressing
the S button. A TV programme is
temporarily displayed instead of the teletext
programme.
Blue or Red Cannot be displayed and it is not sent.
*: Background colour of the sub-page number.
2 Press the 6 buttons to choose a sub-page
number
To cancel the Sub-page function:
Press the O button again.
Reveal
Some teletext pages include hidden text (such as answers to
a quiz).
You can display the hidden text.
Each time you press the Q button, text is
hidden or revealed
Size
You can double the height of the teletext display.
Press the R button.
Index
You can return to the index page instantly.
Press T button
Returns to page 100 or a previously specified page.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s menu
This TV has a number of functions you can operate using
menus. To fully utilize all your TV’s functions, you need to
understand the basic menu operating techniques fully.
5 Press the a button to complete the setting
The menu disappears.
• When watching the television with the NTSC system,
the menus are displayed at about half of their normal
vertical size.
Operation with the buttons on the TV
You can also operate the menus using the buttons on the
front panel of the TV.
P
MENU
OK
TV/VIDEO
Basic operation
1 Press the a button to display the MENU (main
menu)
MENU/OK button 6 buttons 5 buttons
TV/VIDEO button
The menu will disappear if no operation is performed for
approximately one minute.
• Press the a button twice while watching the
MULTI-PICTURE mode.
• The display appearing at the bottom of a menu
indicates buttons on the remote control you can use
when you operate a chosen function.
(Information) button
h
BACK
TV
OK
b button
a button
2 Press the 5 and 6 buttons to choose a
menu title, and press the a button
The menu appears.
To return to the previous menu:
Press the h (information) button.
To exit a menu instantly:
Press the b button.
3 Press the 6 buttons to choose a function
• For details of the functions in the menus, see the
following pages.
4 Press the 5 buttons to choose the setting of
that function
• If you want to operate a function which appears only
with its name, follow the descriptions of that function
on the following pages.
• The display appearing at the bottom of a menu shows
you a button on the remote control that you can use
when you operate a chosen function.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE SETTING
Refer to “Using the TV’s menu” (see page 24) for details of
displaying the menu.
WHITE BALANCE
You can select one of three WHITE BALANCE modes
(three tones of white) to adjust the white balance of the
picture. Since white is the colour which is used as a
reference for all the other colours, changing the WHITE
BALANCE mode affects the appearance of all the other
colours on the screen.
COOL:
A bluish white. Using this mode when watching bright
pictures allows you to enjoy a more vivid and bright picture.
PICTURE MODE
MID:
The normal white colour.
You can choose one of three PICTURE MODEs to adjust
the picture settings automatically.
WARM:
A reddish white. Using this mode when watching films
allows you to enjoy colours that are characteristic of films.
BRIGHT:
Heightens contrast and sharpness.
STANDARD:
Standardizes picture adjustment.
SOFT:
Softens contrast and sharpness.
Picture Adjustment
You can change the picture settings of each PICTURE
MODE mode as you like.
CONTRAST:
You can adjust the picture contrast.
2 :lower
3 : higher
BRIGHT:
You can adjust the picture brightness.
2 :darker
3 : brighter
SHARP:
You can adjust the picture sharpness.
2 :softer
3 : sharper
COLOUR:
You can adjust the picture colour.
2 :lighter
3 : deeper
TINT:
You can adjust the picture tint.
2 :reddish
3 : greenish
• You can change the TINT setting (picture hue) when the
colour system is NTSC 3.58, NTSC 4.43 or a signal
from the VIDEO-4 terminal.
However, operation is not possible when the PIP
function main picture is set to VIDEO-4.
To return to the default settings in each PICTURE
MODE :
Press the blue button.
• This returns the picture settings in the PICTURE MODE
mode you have chosen to the default settings, and stores
them in the PICTURE MODE mode.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE FEATURES
Refer to “Using the TV’s menu” (see page 24) for details of
displaying the menu.
Picture motion compensation function:
This function displays fast-moving pictures (for example,
the players or ball in a football game) more smoothly and
naturally on the screen.
• The effect level of the picture motion compensation
function cannot be changed. The effect level is the same
no matter which of the AUTO, MIN or MAX settings is
used.
1 Choose Super DigiPure
2 Press the 5 buttons to choose a setting.
Then press the a button
DIGITAL VNR
AUTO:
The DIGITAL VNR function cuts down the amount of
noise in the original picture.
You can choose from the three DIGITAL VNR function
settings of AUTO, MIN and MAX.
The TV will automatically adjust the level of the DigiPure
effect to match the amount of noise in the picture, giving the
best possible picture.
• AUTO cannot be chosen when you are watching the
VIDEO-4 picture.
AUTO:
The TV will automatically adjust the level of the DIGITAL
VNR effect to match the amount of noise in the picture,
giving you the best possible picture.
• If you set the DIGITAL VNR effect too high it can make
the picture less sharp. It is recommended to use the
AUTO setting if you can.
MIN:
The level of DigiPure effect is set to the minimum. When
you set the Super DigiPure function to AUTO and notice
some noise, change the setting from AUTO to MIN.
• The MIN setting is not suitable for high-quality pictures
which contain very little noise.
• AUTO cannot be chosen when you are watching the
VIDEO-4 picture.
MAX:
The level of DigiPure effect is set to the maximum. If you
set the Super DigiPure function to AUTO but feel that the
original picture quality has not been reproduced fully,
change the setting from AUTO to MAX.
• The MAX setting is not suitable for low-quality pictures
which contain a lot of noise.
MIN:
The level of the DIGITAL VNR effect is set to the
minimum. If you set the DIGITAL VNR function to AUTO
but feel that the sharpness of the original picture has not
been reproduced fully, change the setting from AUTO to
MIN.
OFF:
The Super DigiPure function is turned off.
• The MIN setting is not suitable for low-quality pictures
which contain a lot of noise.
MAX:
The level of the DIGITAL VNR effect is set to the
maximum. If you set the DIGITAL VNR function to AUTO
but still notice some noise, change the setting from AUTO
to MAX.
• The MAX setting is not suitable for high-quality pictures
which contain very little noise.
• When a progressive-scanning picture is being displayed,
“DIGITAL VNR” cannot be selected.
• The DIGITAL VNR function does not work for
progressive-scanning pictures.
Super DigiPure
The Super DigiPure function uses the latest in digital
technology to give you a natural-looking picture. The Super
DigiPure function includes the following two functions.
DigiPure function:
This function helps to create a natural-looking picture by
eliminating unnecessary edges from high-contrast and crisp
images. For images with low-contrast, edges are added to
produce a sharper, more detailed picture.
You can choose from the three DigiPure function settings of
AUTO, MIN and MAX.
• If you set the DigiPure effect too high on a low-quality
picture that contains a lot of noise, this may actually
make the noise worse. We recommend you use the
AUTO setting if you can.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE FEATURES
COLOUR SYSTEM
PULL DOWN
The colour system is chosen automatically. However, if the
picture is not clear or no colour appears, choose the colour
system manually.
The PULL DOWN function displays a cinema film picture
more smoothly and naturally on the screen.
AUTO:
The television automatically recognizes the type of signal
and turns the function on and off.
ON:
1 Choose COLOUR SYSTEM. Then press the a
button
The sub-menu of the COLOUR SYSTEM function
appears.
This function is turned on.
OFF:
COLOUR SYSTEM
This function is turned off.
MAIN
SUB
PAL
AUTO
• The motion may appear unnatural when viewing images
with the NTSC colour system. When the PULL DOWN
function is set to AUTO or ON, the motion may appear
unnatural when viewing images with the NTSC colour
system.
BACK
OK
TV
D0016-EN
• You cannot select this function in the twin pictures mode
or the picture in picture mode.
2 Press the 5 buttons to choose MAIN or SUB
MAIN:
You can change the colour system of the main-picture.
SUB:
4:3 AUTO ASPECT
You can change the colour system of the sub-picture.
You can choose one of three ZOOM modes, REGULAR,
PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the
normal picture (4:3 aspect ratio).
• Choose MAIN when a sub-picture is not displayed.
3 Press the 6 buttons to choose the
appropriate colour system. Then press the a
button
1 Choose 4:3 AUTO ASPECT then press the a
button
AUTO:
This function detects a colour system from the input
signal. You can only use this when you are viewing a
picture from programme number PR 0 (AV), or a
VIDEO terminal.
Refer to the following table for the various international
colour systems.
Colour system
2 Press the 6 buttons to choose a ZOOM mode.
Then press the a button
Area
Country or region
System
Bahrain, Kuwait, Oman, Qatar, United
Arab Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore,
Thailand, India, etc.
COLOUR MANAGEMENT
PAL
This TV supports the COLOUR MANAGEMENT function
to ensure dull colours are compensated to produce natural
hues.
The COLOUR MANAGEMENT function is on by default.
ON:
COLOUR MANAGEMENT function is turned on.
OFF:
COLOUR MANAGEMENT function is turned off.
Asia,
Middle
East
China, Vietnam, etc
Hong Kong, etc
PAL
PAL
Islamic Republic of Iran, Lebanon,
Saudi Arabia, etc.
SECAM
Russia, etc
SECAM
PAL
Czech Republic, Poland, etc
Germany, Holland, Belgium, etc
UK, etc
Europe
• Set this function to ON under normal conditions.
PAL
PAL
Oceania Australia, New Zealand, etc
Republic of South Africa, etc
Africa Nigeria, etc
PAL
PAL
PAL
Egypt, Morocco, etc
SECAM
• The AUTO function may not function properly if you
have poor signal quality. If the picture is abnormal in the
AUTO function, choose another colour system
manually.
• When in the Programme numbers PR 0 (AV) to PR 99,
you cannot choose NTSC 3.58 or NTSC 4.43.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE FEATURES
PIP
PIP POSITION:
You can choose one of four positions for the sub-picture.
1 Press the 6 buttons to choose PIP. Then
press the a button
The PIP menu appears.
D0061-EN
2 Press the 6 buttons to choose PIP POSITION
3 Press the 5 buttons to choose the position.
Then press the a button
MULTI-PICTURE:
Choosing the number of pictures for the MULTI-PICTURE
function
1 Press the 6 buttons to choose PIP. Then
press the a button
The PIP menu appears.
2 Press the 6 buttons to choose MULTI-
PICTURE
D0062-EN
3 Press the 5 buttons and choose the number
of pictures. Then press the a button
28
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND SETTING
Refer to “Using the TV’s menu” (see page 24) for details of
displaying the menu.
BBE
You can use the BBE function to enjoy easy-to-listen sound
that is faithful to the original sound recorded.
ON:
This function is turned on.
OFF:
This function is turned off.
• Licensed by BBE Sound, Inc. BBE is a registered
trademark of BBE Sound, Inc.
STEREO / I • II
CINEMA SURROUND
When you are viewing a bilingual broadcast programme,
you can choose the sound from Bilingual I (Sub I) or
Bilingual II (Sub II). When the stereo broadcasting is
received poorly, you can change from stereo to mono sound
so that you can hear the broadcast more clearly and easily.
You can enjoy Surround sound with a “live” effect by using
the CINEMA SURROUND function.
ON:
CINEMA SURROUND function is turned on.
s: Stereo sound
OFF:
v : mono sound
CINEMA SURROUND function is turned off.
t : Bilingual I (sub I)
u : Bilingual II (sub II)
SUBWOOFER
Choose the strength of the bass sounds from the subwoofer.
• The sound mode you can choose differs depending on
the TV programme.
• This function does not work in the VIDEO modes. And
this function does not appear in the SOUND SETTING
menu.
HIGH:
Emphasizes the bass sounds from the subwoofer.
LOW:
Reduces the strength of the bass sounds from the
subwoofer.
Sound Adjustment
HEADPHONE
You can adjust the sound to your liking.
You need to use the HEADPHONE menu to adjust the
volume of the headphones.
The HEADPHONE menu can also be used to set whether or
not sound comes from the TV speakers when the
headphones are being used and to perform the settings for
the sound coming from the headphones.
BASS:
You can adjust the low tone of the sound.
2 :weaker
3 : strong
TREBLE:
You can adjust the high tone of the sound.
2 :weaker
3 : strong
1 Press the 6 buttons to choose HEADPHONE.
Then press the a button
The sub-menu of the HEADPHONE function appears.
BALANCE:
You can adjust the volume balance between the left and
right speaker.
2 :turn the left speaker’s volume level up.
3 : turn the right speaker’s volume level up.
SPEAKER
D0044-EN
You can turn off the sound from the TV speakers; but you
should only do this if an audio system is connected to the
TV as a substitute for the TV speakers.
2 Press the 6 buttons to choose a function.
Then press the 5 buttons to change the
setting
ON:
VOLUME:
The TV speakers issue sound.
You can change the volume of the headphones.
OFF:
TV SPEAKER:
You can turn the TV’s speakers on or off.
The TV speakers does not issue sound.
ON:
The sound comes from the TV’s speakers when using
the headphones.
OFF:
The sound does not come from the TV’s speakers
when using the headphones.
OUTPUT:
You can choose the sound output to the headphones.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND SETTING
MAIN:
You can listen to the sound of the main-picture with
your headphones.
SUB:
You can listen to the sound of the sub-picture with
your headphones.
• When the sub-picture is a television programme,
the sound becomes monaural.
3 Press the a button
Hint:
When a sub-picture is displayed, the sound of the sub-
picture can be listened to with the headphones while
listening to the sound of the main-picture with the TV
speakers. To do this, set TV SPEAKER to ON and
OUTPUT to SUB.
• Headphones do not work with sound adjusted for BASS
and TREBLE, BBE effect sound, and CINEMA
SURROUND effect sound.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO SETTING
Refer to “Using the TV’s menu” (see page 24) for details of
displaying the menu.
ID LIST
You can have a name corresponding to the devices
connected for each VIDEO terminal. Giving a name to a
VIDEO terminal makes the VIDEO terminal number appear
on the screen, together with the name.
1 Choose a VIDEO terminal
The image from the chosen external equipment is
displayed in the background on the menu. The image on
the TV is displayed if the TV is chosen.
2 Press the blue button to display the name list
(ID LIST)
3 Press the 6 buttons to choose a name. Then
press the a button
The ID LIST disappears and the name is assigned to the
VIDEO terminal.
• You cannot assign a VIDEO terminal name not found
in the name list (ID LIST).
To erase a name assigned to the VIDEO
terminal:
Choose a blank space.
4 Press the a button to complete the setting
31
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Refer to “Using the TV’s menu” (see page 24) for details of
displaying the menu.
„ To set the CHANNEL GUARD function
1 Choose CHANNEL GUARD, then press the
o button
“SET ID NO.” (ID number setting screen) appears.
SLEEP TIMER
2 Set the ID number to your liking
You can set the TV to automatically turn off after a
specified period of time.
1 Press the 6 buttons to choose a number.
2 Press the 5 buttons to move the cursor.
1 Choose SLEEP TIMER, then press the a
button
3 Press the a button
A Sub-menu of the SLEEP TIMER function appears.
The Sub-menu of CHANNEL GUARD appears.
2 Press the 5 buttons to set the period of time.
Then press the a button
You can set the period of time a maximum of 120
minutes (2 hours) in 10 minute increments.
• One minute before the SLEEP TIMER function turns
off the TV, “GOOD NIGHT!” appears.
• The SLEEP TIMER function cannot be used to turn
off the TV’s main power.
4 Press the 6 buttons to choose a TV channel
Every time you press the 6 buttons, the Programme
number (PR) changes, and the picture of the TV channel
registered in the Programme number (PR) is displayed
on the screen.
• When the SLEEP TIMER function is on, you can
display the Sub-menu of the SLEEP TIMER function
again to confirm and/or change the remaining period
of time of the SLEEP TIMER function. Press the a
button to exit the menu after confirming and / or
changing the remaining time.
5 Press the blue button and set the CHANNEL
GUARD function.
Then press the a button
n (CHANNEL GUARD) appears and the TV channel is
locked.
To cancel the SLEEP TIMER function:
Press the 2 button to set a period of time to “OFF”.
To reset the CHANNEL GUARD function:
Press the blue button again.
n (CHANNEL GUARD) disappears.
BLUE BACK
To disable easy resetting of the CHANNEL GUARD
function, the menu disappears by choosing the
CHANNEL GUARD function and pressing the a
button as in the ordinary menu operation.
You can set the TV to automatically change to a blue screen
and mute the sound if the signal is weak or absent, or when
there is no input from an external device.
ON:
„ To view a locked TV channel
This function is turned on.
OFF:
1 Choose a Programme number (PR) in which a
TV channel locked with the Number buttons or
PR LIST
This function is turned off.
The screen changes to blue and the n (CHANNEL
GUARD) appears. You cannot view the TV channel.
CHANNEL GUARD
When there is a TV channel you wish your children not to
watch, you can use the CHANNEL GUARD function to
lock out the TV channel. Even when a child chooses a
Programme number (PR) in which a locked TV channel has
been registered, the screen will change to blue and displays
n (CHANNEL GUARD) so the TV channel cannot be
viewed. Unless you enter a pre-set ID number by a special
operation, the lock cannot be released and the child cannot
view the TV channel programmes.
2 Press the
(Information) button to display “ID
h
NO.” (ID NO. input screen)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
3 Press the Number buttons to enter the ID
number
The lock is temporarily released so you can view the TV
channel.
If you have forgotten the ID number:
Perform step 1 of “To set the CHANNEL GUARD
function”. After confirming the ID number, press the
b button to exit the menu.
• Even if you reset the lock temporarily, it does not
mean that the CHANNEL GUARD function set for
the TV channel is cancelled. The next time anyone
attempts to view the TV channel, it will be locked
again.
• When you would like to cancel the CHANNEL
GUARD function, you must perform the operation
“To set the CHANNEL GUARD function” again.
• To disable easy choosing of a Programme number
(PR) in which a locked TV channel has been
registered, the Programme number (PR) has been set
that it cannot be chosen by the 6 buttons or the
operation buttons at the TV.
• To disable easy resetting of the lock, “ID NO.” (ID
NO. input screen) is set so that it cannot appear unless
you press the
(Information) button.
h
SNOW NOISE
When burn-in is minimal, burn-in and residual images may
be softened with the SNOW NOISE function.
1 Choose SNOW NOISE
2 Press the a button
Snow appears on the screen. Leave the TV in this
condition for a few hours.
3 After a few hours, press the TV, number
buttons, or # button
Press the A button for the TV.
The SNOW NOISE function has no effect if used only for a
short time.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALL
Refer to “Using the TV’s menu” (see page 24) for details of
displaying the menu.
3 Press the a button to start the AUTO
PROGRAM function
The AUTO PROGRAM menu appears and received TV
channels are automatically registered in the Programme
numbers (PR).
• To cancel the AUTO PROGRAM function, press the
b button.
LANGUAGE
You can choose the language you want to use for the on-
screen display from the language list in a menu.
1 Choose LANGUAGE, then press the a button
A sub-menu of the LANGUAGE function appears.
After the TV channels have been registered in
the Programme numbers (PR), the EDIT menu
appears.
• You can proceed to edit the Programme numbers
(PR) using the EDIT/MANUAL function. For details,
see “EDIT/MANUAL” on page 34.
• If you do not need to use the EDIT/MANUAL
function, go to the next step.
4 Press the a button
2 Press the 5 and 6 buttons to choose a
language. Then press the a button
EDIT/MANUAL
AUTO PROGRAM
The EDIT/MANUAL functions are divided into two types:
editing of the current Programme numbers (PR) (EDIT
functions) and manual registration of a TV channel you
want to view to the Programme number (PR) (MANUAL
function). The details about these functions are as follows:
You can automatically register the TV channels which can
be received well at your residence in the TV’s Programme
numbers (PR) by performing the following.
1 Choose AUTO PROGRAM. Then press the a
button
Caution
• Using the MOVE, DELETE or INSERT function
rewrites the current Programme numbers (PR) list.
Resultingly, the Programme number (PR) of some of
the TV channels will change.
The TELETEXT LANGUAGE menu appears as a sub-
menu of the AUTO PROGRAM function.
• Using the MANUAL function for a TV channel for which
the CHANNEL GUARD function has been set cancels
the CHANNEL GUARD function for the TV channel.
• When a TV channel has already been registered in PR
99, using the INSERT function deletes the TV channel.
1 Choose EDIT/MANUAL, then press the a
2 Press the 6 buttons to choose the teletext
language group that corresponds to the
language of teletext programme that you want
to watch
button
Group
Languages
GROUP-1 Turkish, Hungarian, English, German,
French, Italian, Spanish, Portuguese,
Greek, Swedish, Finnish
• For Programme number PR 0, “AV” appears in the
Programme numbers (PR) list.
• A VIDEO terminal number does not appear in the
Programme numbers (PR) list.
GROUP-2 Polish, Serbian, Croatian, Slovenian,
Czech, Slovak, Rumanian, Hungarian,
German, French, Italian, Swedish,
Finnish
• The CH/CC number is a number unique to the TV
and corresponding to the Channel number of a TV
channel. For the relationship of a Channel number
and a CH/CC number, see “CH/CC numbers” on
page 40.
GROUP-3 Russian, Bulgarian, Lettish, Lithuanian,
Estonian, Ukrainian, Serbian, Croatian,
Slovenian, Czech, Slovak, English,
German
GROUP-4 Arabic, Czech, Slovak. Hungarian,
English, German, French, Italian,
Spanish, Portuguese, Swedish, Finnish
34
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALL
2 Follow the operation description of a function
you want to use and operate the function
2 Press the red button to start the ID function
MOVE:
This function changes a Programme number (PR) of a
TV channel.
ID:
This function registers a Channel name (ID) to a TV
channel.
INSERT:
This function adds a new TV channel in the current
Programme numbers (PR) list by using the CH/CC
number.
• You cannot use the INSERT function if you do not
know a Channel number of a TV channel. Use the
MANUAL function to register a TV channel in the
Programme number (PR).
3 Enter a channel name (ID).
Press the 6 buttons to choose a character.
Press the 5 buttons to move the cursor.
DELETE:
This function deletes an unnecessary TV channel.
MANUAL:
This function manually registers a new TV channel in a
Programme number (PR).
To cancel the ID function:
3 Press the a button
Press the
(Information) button.
h
„ MOVE
4 Press the a button to register a Channel name
1 Press the 6 buttons to choose a TV channel
Every time you press the 6 buttons, the Programme
number (PR) is changed over, and the picture of the TV
channel registered in the Programme number (PR)
appears on the screen.
(ID) to a TV channel
„ INSERT
Preparation:
• A CH/CC number unique to this TV and corresponding
to the Channel number of a TV channel is required. Find
the corresponding CH/CC number from a table “CH/CC
numbers” on page 40 based on the Channel number of
the TV channel.
2 Press the 3 button to start the MOVE function
1 Press the 6 buttons to choose a Programme
number (PR) for which you will register a new
TV channel
2 Press the green button and start the INSERT
function
3 Press the 6 buttons to choose a new
Programme number (PR)
To cancel the MOVE function:
Press the
(Information) button.
h
4 Press the 2 button to change the Programme
number (PR) of a TV channel to a new
Programme number (PR)
„ ID
3 Press the 6 buttons to choose “CC” or “CH”
according to the CH/CC number of the TV
channel
1 Press the 6 buttons to choose a TV channel
Every time you press the 6 buttons, the Programme
number (PR) is changed over, and the picture of the TV
channel registered in the Programme number (PR)
appears on the screen.
To cancel the INSERT function:
Press the
(Information) button.
h
35
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALL
Sound system
4 Press the Number buttons to enter the
remaining CH/CC number
The TV shifts to registration mode.
When the registration is completed, the picture of the TV
channel appears on the screen.
• The CH/CC number is a number indicating the
broadcast frequency to the TV. If the TV cannot
detect the TV channel corresponding to the broadcast
frequency indicated by the CH/CC number, a picture
in the no-signal state appears.
Area
Country or region
System
Bahrain, Kuwait, Oman, Qatar, United
Arab Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore,
Thailand, India, etc.
B/G
Asia,
Middle
East
China, Vietnam, etc.
Hong Kong, etc.
D/K
I
Islamic Republic of Iran, Lebanon,
Saudi Arabia, etc.
B/G
„ DELETE
Russia, etc.
D/K
D/K
B/G
I
1 Press the 6 buttons to choose a TV channel
Every time you press the 6 buttons, the Programme
number (PR) is changed over, and the picture of the TV
channel registered in the Programme number (PR)
appears on the screen.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
Europe
Oceania Australia, New Zealand, etc.
Republic of South Africa, etc.
Africa Nigeria, etc.
B/G
I
2 Press the yellow button to delete the TV
channel
B/G
B/G
The TV channel is deleted from the Programme numbers
(PR) list.
Egypt, Morocco, etc.
„ MANUAL
1 Press the 6 buttons to choose a Programme
number (PR) to which you want to register a
new TV channel
4 Press the green or red button to search for a TV
channel
Scanning stops when the TV finds a TV channel. Then
the TV channel is displayed.
2 Press the blue button to activate the MANUAL
function
5 Press the green or red button repeatedly until
the TV channel you want appears
At the right side following the CH/CC number, the
SYSTEM (broadcasting system) of the TV channel
appears.
If the TV channel reception is poor:
Press the blue or yellow button to fine-tune the TV
channel.
If you cannot hear the normal sound even when
the picture of the TV channel appears normally:
The SYSTEM setting is wrong. Press the 3 button and
choose a SYSTEM that has normal sound.
6 Press the a button and register the TV
channel to a Programme number (PR)
The normal EDIT menu is resumed.
To cancel the MANUAL function:
Press the
(Information) button.
h
3 Press the 3 button to choose the SYSTEM
(sound system) for a TV channel you want to
register
Refer to the following table for the various international
sound systems.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALL
Changing the TELETEXT LANGUAGE
setting
After the AUTO PROGRAM function is completed, you
can change the country you have already set by using the
AUTO PROGRAM function.
1 Display the INSTALL menu
When the EDIT menu is currently being
displayed:
Press the
menu.
(Information) to return to the INSTALL
h
2 Press the 6 buttons to choose AUTO
PROGRAM. Then press the a button
A TELETEXT LANGUAGE menu appears as a sub-
menu of the AUTO PROGRAM function.
Group
Languages
GROUP-1 Turkish, Hungarian, English, German,
French, Italian, Spanish, Portuguese,
Greek, Swedish, Finnish
GROUP-2 Polish, Serbian, Croatian, Slovenian,
Czech, Slovak, Rumanian, Hungarian,
German, French, Italian, Swedish,
Finnish
GROUP-3 Russian, Bulgarian, Lettish, Lithuanian,
Estonian, Ukrainian, Serbian, Croatian,
Slovenian, Czech, Slovak, English,
German
GROUP-4 Arabic, Czech, Slovak. Hungarian,
English, German, French, Italian,
Spanish, Portuguese, Swedish, Finnish
3 Press the 6 buttons to choose a group
4 Press the b button to complete the setting
The menu disappears.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional preparation
Connecting the external devices
Connect the devices to the TV, paying attention to the
following connection diagram.
1 VCR (composite signal)
2 VCR (S-VIDEO signal; Y/C)
3 VCR for recording (composite signal)
4 DVD player (composite signal)
5 DVD player (S-VIDEO signal; Y/C)
6 DVD player (component video signals; Pr/Pb/Y)
7 TV game (composite signal/S-VIDEO signal; Y/C)
8 Headphones
Before connecting anything:
• Read the manuals provided with the devices. Depending
on the devices, the connection method may differ from
the figure. In addition, the device settings may be
changed depending on the connection method to secure
proper operation.
• Turn off all the devices including the TV.
• The “Specifications” on page 43 contains the details of
the VIDEO terminals. If you are connecting a device not
listed in the following connection diagram, see the table
to choose the best VIDEO terminal.
9 Camcorder (composite signal/S-VIDEO signal; Y/C)
0 Audio/Video cable
- Video cable
= Audio cable
~ S-VIDEO cable
• Note that connecting cables are not supplied.
! Component cable
OUT
IN
Front of the receiver
S
VIDEO
AUDIO
L
R
IN(VIDEO-5)
S
VIDEO
AUDIO
L
R
IN(VIDEO-5)
IN
AUDIO
OUT
AUDIO
VIDEO
VIDEO S-VIDEO
R
R
R
L/MONO
R
L
Back of the receiver
VIDEO-1
VIDEO-2
L
L
L
COMPONENT(VIDEO-4)
R
AUDIO
OUT
Pr
Pb
Y
R-AUDIO-L
VIDEO-3
OUT
OUT
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional preparation
„ Connecting devices to the OUT terminal
The signals of the images and sound you are currently
viewing with this TV are output through the OUT terminal.
By connecting a VCR to the OUT terminal, you can record
the currently shown image and sound to that VCR. To do
this, connect the VCR and OUT terminal following the
steps below.
1 Connect the VIDEO in the OUT terminals and
the VCR’s VIDEO IN (video input) terminal with
a video cable
2 Connect the AUDIO (L and R) in the OUT
terminals and the VCR’s AUDIO IN (audio L/R
input) terminals with an audio cable
• When you turn off the TV, the signals from the OUT
terminal are also turned off.
• No signal is output when VIDEO-4 is chosen.
„ Connecting headphones
Connect the headphones with a stereo mini-jack (of 3.5 mm
in diameter) to the headphone jack at the receiver.
• The headphone volume is adjusted with the
“HEADPHONE” menu (see page 29).
„ Connecting Speakers/Amplifier
See the Audio equipment connection diagram, then connect
the audio equipment you desire to the TV.
You can use external front speakers to listen to the TV
sound instead of the TV speakers.
Before connecting anything:
• Read the manuals provided with the amplifier and
speakers.
• Turn the TV and amplifier off.
• To prevent magnetism from the speakers adversely
affecting the TV screen, use magnetically-shielded
speakers for the front speakers.
• Note that connecting cables are not supplied.
Back of the receiver
R
L
VIDEO
L
DEO-4)
R
AUDIO
Y
OUT
1 Amplifier
2 External speakers (Magnetic-shielded type)
• The output from the AUDIO OUT terminal is not
interrupted by headphone connection to the TV. You
cannot cut the sound from the front speaker even if you
connect a headphone to the TV.
• Adjust the volume of the external speakers with the
amplifier.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
CH/CC numbers
When you want to use the INSERT function on page 35, find the CH/CC number corresponding to the Channel number of the TV
channel from this table.
CCIR:
The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc.
OIRT:
The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc.
AUSTRALIA: The AUSTRALIA channel numbers are the channel numbers used in Australia, etc.
Channel
OIRT
R1
Channel
OIRT
CH
CCIR
E2
AUSTRALIA
AU-0
CC
CCIR
S-1
AUSTRALIA
CH02
CH03
CH04
CH05
CH06
CH07
CH08
CH09
CH10
CH11
CH12
CH13
CH14
CH15
CH16
CH17
CH18
CH19
CH20
CH21
CH22
CH23
CH24
CH25
CH26
CH27
CH28
CH29
CH30
CH31
CH32
CH33
CH34
CH35
CH36
CH37
CH38
CH39
CH40
CH41
CH42
CH43
CH44
CH45
CH46
CH47
CH48
CH49
CH50
CH51
CH52
CH53
CH54
CH55
CH56
CH57
CH58
CH59
CH60
CH61
CH62
CH63
CH64
CH65
CH66
CH67
CH68
CH69
CH70
CC01
CC02
CC03
CC04
CC05
CC06
CC07
CC08
CC09
CC10
CC11
CC12
CC13
CC14
CC15
CC16
CC17
CC18
CC19
CC20
CC21
CC22
CC23
CC24
CC25
CC26
CC27
CC28
CC29
CC30
CC31
CC32
CC33
CC34
CC35
CC36
CC37
CC38
CC39
CC40
CC41
CC42
CC43
CC44
CC45
CC46
CC47
CC48
CC49
CC50
CC51
CC52
CC53
CC54
CC55
CC56
CC57
CC58
CC59
CC60
CC61
CC62
CC63
CC64
CC75
CC76
CC77
CC78
CC79
CC95
CC96
CC97
CC98
CC99
AU-5
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
AU-1
AU-2
AU-6
AU-7
AU-8
AU-9
S-2
S-3
S-4
S-5
S-6
S-7
S-8
S-9
R2
R6
R7
R8
R9
AU-5A
R10
R11
R12
AU-10
AU-11
S-10
S-11
S-12
S-13
S-14
S-15
S-16
S-17
S-18
S-19
S-20
S-21
S-22
S-23
S-24
S-25
S-26
S-27
S-28
S-29
S-30
S-31
S-32
S-33
S-34
S-35
S-36
S-37
S-38
S-39
S-40
S-41
E21
E22
E23
E24
E25
E26
E27
E28
E29
E30
E31
E32
E33
E34
E35
E36
E37
E38
E39
E40
E41
E42
E43
E44
E45
E46
E47
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E58
E59
E60
E61
E62
E63
E64
E65
E66
E67
E68
E69
X
Y
Z
Z+1
Z+2
R3
R4
R5
AU-3
AU-4
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If a problem arises while you are using the TV, please read this “Troubleshooting” well before you request having the TV repaired.
You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has
problems, you may think there is a problem with the TV itself.
Important:
• This Troubleshooting guide only covers problems whose cause are not easy to determine. If a question arise when you are
operating a function, read the page(s) corresponding to the operation of the function well, not this Troubleshooting guide.
• After you have followed the Troubleshooting description or the operating description of the functions concerned without any
success, remove the AC plug from the AC outlet and request a repair of your TV. Do not attempt to repair the TV by yourself or
remove the rear cover of the TV.
„ If you cannot turn on the TV
„ Poor sound
• Are the AC plugs on the power cords from the TV and
receiver connected to AC outlets?
• Have you adjusted BASS or TREBLE properly? If not,
follow the description “Sound Adjustment” on page 29
to try to adjust them properly.
• When the TV channel reception is poor, it can be hard to
hear the stereo or bilingual sound. In this case, follow the
description “STEREO / I • II” on page 29 to hear the
sound more easily by changing it to a mono sound.
„ No picture/No sound
• Have you chosen a TV channel whose reception is
extremely bad? In this case, the BLUE BACK function
will be activated, the entire screen becomes blue, and the
sound is muted. In spite of this, if you want to view the
TV channel, follow the description “BLUE BACK” on
page 32 to try to change the BLUE BACK function
setting to OFF.
• Have you set the SPEAKER function to OFF? Follow
the description “SPEAKER” on page 29 to confirm the
SPEAKER function setting to try to solve the problem.
• If the SYSTEM setting for a TV channel is incorrect, it
may prevent the sound from being issued. Follow the
description “EDIT/MANUAL” on page 34 to use the
MANUAL function to try to change the SYSTEM
setting.
„ Operation disabled
• Have the batteries of the remote control become
exhausted? Follow the description “Putting the batteries
into the Remote control” on page 7 and replace them
with new batteries to try to solve the problem.
• Have you attempted to use the remote control at the sides
or rear of the TV or at a location more than seven meters
apart from the TV location? Operate the remote control
in the front of your TV or a location less than seven
meters from your TV to try to solve the problem.
• When you are viewing a teletext programme, you cannot
operate the menus. Press the b button to return the
teletext programme to the ordinary TV programme to try
operating the menus.
„ Poor picture
• If noise totally obscures the picture (snow), the aerial or
aerial cable may have trouble. Check the following to try
to solve the trouble:
• If the TV suddenly stops responding, disconnect the
power cords of the TV and receiver from the AC outlets.
Connect them to the AC outlets again to turn on the TV.
If the TV returns to a normal state, it is not a failure.
Has the TV and aerial been connected properly?
Has the aerial cable been damaged?
Is the aerial pointed to the right direction?
Is the aerial itself faulty?
• If the TV or aerial receives interference from the other
devices, stripes or noise may appear in the picture. Move
such devices as an amplifier, personal computer, or a
hair drier that can cause interference away from your
TV, or try changing its location. If the aerial suffers
interference from a radio tower or high-voltage wire,
please contact your local dealer.
• If the TV receives interference from signal reflecting
from mountains or building, double-pictures (ghosting)
will occur. Try to change the aerial’s direction or replace
the antenna with the one with better directionality.
• Are your COLOUR SYSTEM settings for the TV
channels correct? Follow the description “COLOUR
SYSTEM” on page 27 to try to solve the trouble.
• Has COLOUR or BRIGHT been controlled properly?
Follow the description “Picture Adjustment” on page 25
to try to adjust them properly.
• Videotaping teletext is not recommended because it may
not record correctly.
• When viewing images from commercially available
video software products, or videos from videotapes
which have been recorded improperly, the top of the
image may be distorted. This is due to the condition of
the video signal, and not because of malfunction.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
„ Other concerns
• When the SLEEP TIMER function operates, the TV is
automatically turned off. If the TV is turned off
suddenly, try to press the # (Standby) button to turn on
the TV once again. At this time, if the TV resumes a
normal state, there is no problem.
• When a WSS signal is included in the broadcast signal or
the signal from an external device, the ZOOM mode will
change automatically. When you want to return to the
previous ZOOM mode, press the c button to
choose the ZOOM mode again.
• It takes a short period of time from the time an operation
such as changing channels is performed until an image is
displayed. This is not a malfunction. This is the time
required for the image to stabilize before it can be
displayed.
• The TV may emit a crackling sound due to a sudden
change in temperature. It does not matter if a picture or
sound does not show any abnormality. If you hear
crackling sounds frequently while you are viewing the
TV, other causes may be assumed. For precautionary
purposes, request your service technician to inspect it.
• In the twin pictures mode the sub-picture may disappear
when the external device is operated. If this happens,
press the P button and display the sub-picture again.
• The headphone volume is adjusted with the
“HEADPHONE” menu. It cannot be adjusted with the
5 buttons or r (volume) q buttons.
• When TV SPEAKER in the “HEADPHONE” menu is
ON, even if the headphones are connected, sound is
emitted from the TV speaker. When you do not want to
emit sound from the TV speaker, turn the setting OFF.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model
PD-42DX
PD-35DX
Item
Broadcasting systems
Colour systems
B, G, I, D, K, K1
PAL, SECAM
• The EXT terminals also support the NTSC 3.58/4.43 MHz system.
Channels and frequencies
VHF low channel (VL) =46.25 to 168.25 MHz
VHF high channel (VH) =175.25 to 463.25 MHz
UHF channel (U) =471.25 to 855.25 MHz
• Receives cable channels in mid band (X to Z+2, S1 to S10), super band (S11 to S20) and hyper band (S21 to
S41).
Sound-multiplex systems
Teletext systems
A2 (B/G, D/K), NICAM (B/G, I, D/K) system
FLOF (Fastext), TOP, WST (World Standard System)
Languages displayed by teletext Please see the table in the description “Changing the TELETEXT LANGUAGE setting” on page 37.
Power requirements
Power consumption
AC 110 to 240 V, 50/60 Hz
TV:
TV:
Average: 338 W, Standby: 0.5 W
Average: 243 W, Standby: 0.5 W
Receiver:
Average: 35 W, Standby: 2.4 W
Screen size
Audio output
Speakers
Viewable area 105.7 cm (measured diagonally)
Rated Power output: 10 W + 10 W + 15 W (Woofer)
Viewable area 90.2 cm (measured diagonally)
DD speaker ((9.5 cm × 1 cm) oval × 1) × 2
Subwoofer (16 cm round woofer × 1) × 1
VIDEO-1 terminal
VIDEO-2 terminal
VIDEO-3 terminal
VIDEO-4 terminal
RCA connectors × 3
• Video input and Audio L/R inputs are available.
RCA connectors × 3, S-VIDEO connector × 1
• Video input, S-VIDEO (Y/C) input, Audio L/R inputs are available.
RCA connectors × 3, S-VIDEO connector × 1
• Video input, S-VIDEO (Y/C) input, Audio L/R inputs are available.
RCA connectors × 5
• Component video (Pr, Pb, Y) inputs and Audio L/R inputs are available.
• progressive-scanning signals (625p or 525p) are available.
VIDEO-5 terminal
OUT terminal
RCA connectors × 3, S-VIDEO connector × 1
• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.
RCA connectors × 3
• Video output and Audio L/R outputs are available.
AUDIO OUT terminal
RCA connectors × 2
• Audio L/R outputs are available.
Headphone jack
Stereo mini-jack (3.5 mm in diameter)
Dimensions (W × H × D)
TV:
1035 mm × 640 mm × 98 mm
1123 mm × 640 mm × 98 mm
(When mounting the DD speakers)
42 mm × 639 mm × 54 mm
TV:
887 mm × 545 mm × 99 mm
975 mm × 545 mm × 103 mm
(When mounting the DD speakers)
42 mm × 545 mm × 54 mm
DD speaker:
DD speaker:
Receiver:
Subwoofer:
435 mm × 99 mm × 382 mm
435 mm × 230 mm × 126 mm
Weight
TV:
33.0 kg
35.5 kg
TV:
27.2 kg
29.3 kg
(When mounting the DD speakers)
0.8 kg (Except for mounting fixture) DD speaker:
(When mounting the DD speakers)
0.7 kg (Except for mounting fixture)
DD speaker:
Receiver:
Subwoofer:
5.3 kg
3.7 kg
Accessories
Refer to “Checking contents of packages” on page 5.
Design and specifications subject to change without notice.
Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration purpose
in public places (cafes, hotels, etc.) without the consent of the owners of copyright of the original picture sources, as this constitutes an
infringement of copyright.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
© 2003 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
0203-T-CR-VP
|