Color Television Users Guide
For Models:
AV-30W777
AV-30W767
TV CATV VCR DVD
POWER
INPUT
SLEEP
TIMER DISPLAY C.C.
THEATER PRO
1
2
3
6
9
VIDEO STATUS
4
5
ASPECT
7
8
0
SUB CH
TUNE
RETURN+
/TV
FAVORITE ML/MTS SOUND GUIDE
MUTING
OK
CH
CH
+
–
VOL
–
VOL
+
MENU
BACK
VCR CHANNEL VCR/DVD
TV/VCR
POWER
PREV NEXT
REW
REC
PLAY
FF
STOP
PAUSE
OPEN/CLOSE
STILL/PAUSE
RM-C1272G
TV
Illustration of AV-30W777 and RM-C1272G
Important Note:
In the spaces below, enter the model and serial number of your television (located
at the rear of the television cabinet). Staple your sales receipt or invoice to the
inside cover of this guide. Keep this user’s guide in a convenient place for future
reference. Keep the carton and original packaging for future use.
Model Number:
LCT2034-001A-A
0506TNH-II-IM
Serial Number:
Download from Www.Somanuals.com. All Manuals Search And Download.
®
• As an “ENERGY STAR ” partner,
JVC has determined that this
product or product model meets the
®
“ENERGY STAR ” guidelines for energy
efficiency.
Important Safeguards
CAUTION:
Please read and retain for your safety.
Electrical energy can perform many useful functions. This TV set has been engineered and
manufactured to assure your personal safety. But improper use can result in potential
electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this
TV set, observe the following basic rules for its installation, use and servicing. Also follow all
warnings and instructions marked on your TV set.
INSTALLATION
(POLARIZED-TYPE)
1 Your TV set is equipped with a polarized AC line plug (one
blade of the plug is wider than the other). This safety feature
allows the plug to fit into the power outlet only one way.
Should you be unable to insert the plug fully into the outlet,
try reversing the plug. Should it still fail to fit, contact your
electrician.
2 Operate the TV set only from a power source as indicated on the TV set or refer to the
operating instructions for this information. If you are not sure of the type of power supply to
your home, consult your TV set dealer or local power company. For battery operation, refer
to the operating instructions.
3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords
and broken plugs. They may result in a shock or fire hazard. Call your service technician for
replacement.
4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set
where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.
5 Do not use this TV set near water — for example, near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near swimming pool, etc.
6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna discharge unit, connection
requirements for the grounding electrode.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
7 An outside antenna system should not be located in the vicinity of overhead power lines
or other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRICAL
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ARTICLE 250, PART H)
NEC - NATIONAL ELECTRIC CODE
8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during
operation to be released.
Therefore:
— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa,
rug, etc.
— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.
— Never cover the openings with a cloth or other material.
— Never place the TV set near or over a radiator or heat register.
9 To avoid personal injury:
— Do not place a TV set on a sloping shelf unless properly secured.
— Use only a cart or stand recommended by the TV set manufacturer.
— Do not try to roll a cart with small casters across thresholds or deep pile carpets.
— Wall or shelf mounting should follow the manufacturer’s instructions, and should use a
mounting kit approved by the manufacturer.
Use
10 Caution children about dropping or pushing objects into the TV set through cabinet
openings. Some internal parts carry hazardous voltages and contact can result in a fire or
electrical shock.
11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol
cleaner.
12 Never add accessories to a TV set that has not been designed for this purpose. Such
additions may result in a hazard.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PORTABLE CART WARNING
(Symbol provided by RETAC)
13 For added protection of the TV set during a lightning storm or when the TV set is to be left
unattended for an extended period of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to product due to lightning storms or power line surges.
14 A TV set and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the TV set and cart combination to overturn.
Service
15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normally by following the operating instructions. Adjust
only those controls that are covered in the operating instructions as improper adjustment
of other controls may result in damage and will often require extensive work by a
qualified technician to restore the TV set to normal operation.
E. If the TV set has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in performance — this indicates a need for
service.
16 Do not attempt to service this TV set yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
17 When replacement parts are required, have the service technician verify in writing that the
replacement parts he uses have the same safety characteristics as the original parts. Use
of manufacturer’s specified replacement parts can prevent fire, shock, or other hazards.
18 Upon completion of any service or repairs to this TV set, please ask the service technician
to perform the safety check described in the manufacturer’s service literature.
19 When a TV set reaches the end of its useful life, improper disposal could result in a picture
tube implosion. Ask a qualified service technician to dispose of the TV set.
20 Note to CATV system installer.
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as practical.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Quick Setup . . . . . . . . . . . . . 7
Unpacking your TV . . . . . . . . . . . . 7
TV Models . . . . . . . . . . . . . . . . 8
TV Remote Control . . . . . . . . . . . 10
Getting Started . . . . . . . . . . . . . 11
The Remote Control . . . . . . . . . . 11
Connecting Your Devices . . . . . . . 12
Interactive Plug In Menu . . . . . . . . 20
Programming your remote . . . . . . . 23
Clock Timers . . . . . . . . . . . 51
Set Clock . . . . . . . . . . . . . . . 51
On/Off Timer . . . . . . . . . . . . . 52
Button Functions . . . . . . . . . 53
Power . . . . . . . . . . . . . . . . . . 53
Number Buttons . . . . . . . . . . . . . 53
Tune . . . . . . . . . . . . . . . . . . 53
Input . . . . . . . . . . . . . . . . . . . 53
Channel +/- . . . . . . . . . . . . . . 53
Volume +/- . . . . . . . . . . . . . . . 53
Return+/TV . . . . . . . . . . . . . . . 54
Sound . . . . . . . . . . . . . . . . . . 54
Muting . . . . . . . . . . . . . . . . . . 54
Video Status . . . . . . . . . . . . . . . 55
TheaterPro D6500K . . . . . . . . . . . 55
Sleep Timer . . . . . . . . . . . . . . . 55
Display . . . . . . . . . . . . . . . . . 56
C.C. . . . . . . . . . . . . . . . . . . . 56
Aspect . . . . . . . . . . . . . . . . . 57
Aspect Ratios . . . . . . . . . . . . . 57
Favorite . . . . . . . . . . . . . . . . . . . 59
ML/MTS . . . . . . . . . . . . . . . . . . . 60
Menu . . . . . . . . . . . . . . . . . . 60
OK . . . . . . . . . . . . . . . . . . . 60
Back . . . . . . . . . . . . . . . . . . . 60
Sub Channel . . . . . . . . . . . . . 61
Guide . . . . . . . . . . . . . . . . . 61
TV/CATV Slide Switch . . . . . . . . . . 62
VCR/DVD Slide Switch . . . . . . . . . 62
VCR Buttons . . . . . . . . . . . . . . . 62
DVD Buttons . . . . . . . . . . . . . . . 62
Onscreen Menus . . . . . . . . . . 27
Using the Guide . . . . . . . . . . . . . 27
Onscreen Menu System . . . . . . . . . 28
Initial Setup . . . . . . . . . . . . 30
Noise Muting . . . . . . . . . . . . 30
Language
.
.
.
.
.
.
.
.
.
.
.
.
30
Front Panel Lock . . . . . . . . . . . . 30
V-Chip . . . . . . . . . . . . . . . . . . 31
Closed Caption . . . . . . . . . . . . . 38
Auto Shut Off . . . . . . . . . . . . . . 40
Software Version . . . . . . . . . . . 40
Tilt Correction . . . . . . . . . . . . . . . 40
Tuner Setup . . . . . . . . . . . 41
Auto Tuner Setup . . . . . . . . . . . 41
Channel Summary . . . . . . . . . . . 41
Find Channel . . . . . . . . . . . . . . 43
Digital Antenna Level . . . . . . . . . . 43
External Input . . . . . . . . . . . 44
Digital-In Size . . . . . . . . . . . . . . . 44
Digital-In1 Audio . . . . . . . . . . . . . 44
Video Input Label . . . . . . . . . . . 45
Troubleshooting . . . . . . . . . 63
OSD Information . . . . . . . . . 64
Specifications . . . . . . . . . . 65
Warranty . . . . . . . . . . . . . 66
Authorized Service Centers . . 67
Notes . . . . . . . . . . . . . . 68
Picture Adjust . . . . . . . . . . . 46
Picture Settings . . . . . . . . . . . . . 46
Adjust Picture Settings . . . . . . . . . 46
Color Temperature . . . . . . . . . . . . 46
Noise Reduction . . . . . . . . . . . . 47
VSM . . . . . . . . . . . . . . . . . . . 47
Natural Cinema . . . . . . . . . . . . 47
Position Adjustment . . . . . . . . . . . 48
Reset . . . . . . . . . . . . . . . . . . 48
Sound Adjust . . . . . . . . . . . 49
Sound Settings . . . . . . . . . . . . . 49
Adjust Sound Settings . . . . . . . 49
Optical Out . . . . . . . . . . . . . . 49
Turn On Volume . . . . . . . . . . . . . 50
Volume Limit . . . . . . . . . . . . . . . 50
Reset . . . . . . . . . . . . . . . . . . 50
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Unpacking your TV
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new
television, please check to make sure you have all of the following items. In addition to this
guide, your television box should include:
Two AA
Batteries
1 Remote Control
1 Television
TV CATV VCR DVD
POWER
INPUT
SLEEP
TIMER DISPLAY C.C.
THEATER PRO
1
2
3
6
9
VIDEO STATUS
4
5
ASPECT
7
8
0
SUB CH
TUNE
RETURN+
/TV
FAVORITE ML/MTS SOUND GUIDE
MUTING
OK
CH
CH
+
–
VOL
–
VOL
+
Note: Your television
and/or remote
MENU
BACK
VCR CHANNEL VCR/DVD
PREV NEXT
POWER TV/VCR
REW
REC
PLAY
FF
control may differ
from the examples
illustrated here.
STOP
PAUSE
OPEN/CLOSE
STILL/PAUSE
SERVICE
ONL
POWER
Y
POWER
ON TIMER
/
RM-C1272G
TV
We recommend that before you start using your new television, you read your entire User’s
Guide so you can learn about your new television’s many great features. If you’re anxious to
start using your television right away, a quick setup guide follows on the next few pages.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
TV Models
Before you connect your television to another device, please refer to the proper diagrams for
your specific TV and remote. These will help assist you in understanding how to connect your
television to another device, as well as use the remote to set up your television.
Rear panel diagram
UNPLUG THE POWER CORD FROM
AC OUTLET BEFORE REMOVING THE
REAR COVER
When the rear cover is removed, follow
"CAUTION AT DISASSEMBLY" procedure in
the service manual before plugging the TV's
power cord into an AC outlet. Failure to
follow the procedure will result in
PERMANENT damage to some of the
television features.
DÉBRANCHEZ LE CORDON DE LA PRISE DE
COURANT C.A. AVANT DE RETIRER LE
COUVERCLE ARRIÈRE.
Une fois le couvercle arrière déposé suivez la
procédure ««ATTENTION LORS DU
DÉMONTAGE»» décrite dans la manuel de
service avant de brancher le cordon du
téléviseur dans une prise c.a. L'omission de
suivre la procédure causera des dommages
PERMANENTS
téléviseur.
à
certaines fonctions du
75Ω
(VHF/UHF)
Manufactured under license
from Dolby Laboratories.
"Dolby" and the double-D
symbol are trademarks of
Dolby Laboratories.
1
INPUT-3
INPUT-2
INPUT-1
DIGITAL-IN
COMPONENT VIDEO
VIDEO-2 VIDEO-1
2
S-VIDEO
S-VIDEO
OVER
VIDEO
L
OVER
VIDEO
L
Y
AUDIO OUT
VIDEO
OPTICAL OUT
DIGITAL
AUDIO
L
L
AUDIO
R
Pb
Pr
AUDIO
R
AUDIO
R
R
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Side panel diagram
INPUT 4
S-VIDEO
MENU
+
–
+
–
OVER
VIDEO
OPERATE
CHANNEL
L/MONO
AUDIO
R
VOLUME
Front panel diagram
SERVICE
ONLY
POWER
POWER
ON TIMER
/
Illustration of AV-30W777
Notes:
• The terminal labeled "SERVICE ONLY", is exclusively used to update the software version.
• BBE is only for AV-30W777.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Remote Control
POWER
INPUT
TV CATV VCR DVD
SLEEP
TIMER
DISPLAY C.C.
THEATER PRO
VIDEO STATUS
ASPECT
1
4
2
3
6
9
5
7
8
0
TUNE
RETURN+
/TV
SUB CH
FAVORITE ML/MTS SOUND GUIDE
MUTING
OK
CH +
CH –
VOL
+
VOL
–
MENU
BACK
VCR/DVD
POWER
VCR CHANNEL
PREV NEXT
TV/VCR
REW
REC
PLAY
FF
STOP
PAUSE
OPEN/CLOSE
STILL/PAUSE
RM-C1272G
TV
RM-C1272G
• For information on remote control buttons, see pages 53 - 62.
• SUB CH and GUIDE buttons are for digital channels. If your TV is connected to an ATSC
antenna or Digital Cable, you can use these buttons.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away. If you have questions, or for more detailed
information on any of these steps, please consult other sections of this manual.
Step 1 – The Remote Control
Before you can operate your remote control, you first
need to install the batteries (included).
Lift and pull the latch on the back of the remote control
to open. Insert two batteries (included) carefully noting
the “+” and “–” markings, placing the “–” end in the unit
first. Snap the cover back into place.
When you change the batteries, try to complete the
task within three minutes. If you take longer than
three minutes, the remote control codes for your
VCR, DVD, and/or cable box/satellite receiver may
have to be reset. See pages 23 - 26.
Key Feature Buttons
MUTING
OK
The four key feature buttons at the center of the remote
can be used for basic operation of the television. The top
and bottom buttons will scan forward and back through the
available channels. To move rapidly through the channels
using JVC’s Hyperscan feature, press and hold CH+ or
CH–. The channels will zip by at a rate of five channels per
second. The right and left buttons will turn the volume up or
down. These buttons are also marked with four arrows and
are used with JVC’s onscreen menu system. To use the
onscreen menus, press the MENU button.
CH +
CH –
VOL
+
VOL
–
MENU
BACK
POWER
TV CATV
Basic Operation
Turn the television on and off by pressing the POWER button at the top right
corner of the remote. If this is the first time you are turning on the TV, the
interactive plug-in menu appears.
• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if
you need to operate a cable box.
• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to
DVD to control a DVD player. Please see pages 23 to 26 for instructions on
programming your remote control to operate a cable box, VCR or DVD player.
V VCR DVD
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Step 2 – Connecting Your Devices
To make these connections, you will use plugs like the ones illustrated below.
Component Cables
Coaxial Cables
Composite Cables
Audio Cables
Used to connect an external
antenna or cable TV system to your
TV.
Used to connect audio/video
devices like VCRs, DVD players,
stereo amplifiers, game consoles,
etc.
S-Video Cable
Used to make video connections
with S-Video VCRs, Camcorders
and DVD players.
Notes:
• These connections are examples.
• After you are finished connecting your devices, plug the power cord into the nearest power
outlet and turn on the TV.
• If you follow these diagrams and the television does not work properly, contact your local
cable operator.
• To connect a DVD player, see VCR Connection. A DVD player is optional
• If you have a satellite television system, refer to the satellite TV manual.
No VCR Connection
Cable or Antenna
Output
Coaxial Cable
75Ω
(VHF/UHF)
TV Rear Panel
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
VCR Connection
Notes:
• Green, blue and red are the most common colors for DVD cables. Some models may vary
colors. Please consult the user’s manual for your DVD player for more information.
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete
one set of connections (DVD or audio output) before starting the other to avoid accidentally
switching the cables.
• You may also connect the DVD player to Input 1.
Diagram #1
VCR
R
L
V
Cable or Antenna
Output
Cable Cable
In Out
IN
OUT
Coaxial Cable
OR
TV Rear Panel
75Ω
(VHF/UHF)
INPUT-3
INPUT-2
INPUT-1
COMPONENT VIDEO
VIDEO-2
VIDEO-1
SO
S-VIDEO
OVER
L
OVER
VIDEO
L
Y
VIDEO
L
AUDIO
R
Pb
P
A
R
IO
R
DVD Player (Optional)
AUO UT
VEO OUT
PR PB
Y
R
L
Note:
• If this connection setup does not work for you, try the connection setup on page 14.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Diagram #2
VCR
R
L
V
Cable or Antenna
Output
Cable Cable
In Out
IN
OUT
IN
OR
Two-Way Splitter
OUT OUT
TV Rear Panel
INPUT-3
INPUT-2
INPUT-1
Coaxial Cable
COMPONENT VIDEO
75Ω
(VHF/UHF)
VIDEO-2
VIDEO-1
SO
S-VIDEO
OVER
V
L
OVER
VIDEO
L
Y
VIDEO
L
AUDIO
R
P
P
AU
R
IO
R
DVD Player (Optional)
AUO UT
VEO OUT
PR PB
Y
R
L
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to a Camcorder
You may connect a camcorder, game console or other equipment to your television by using
the side input jacks (Input 4) located on the side of the television. You can also connect
these using the television’s rear input jacks, using the same instructions.
INPUT
4
S-VIDEO
MENU
+
–
+
–
OVER
VIDEO
OPERATE
CHANNEL
Camcorder
- OR -
L/MONO
AUDIO
R
VOLUME
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on
the front of the TV, OR connect an S-Video cable from the camcorder to the back of the TV.
2) Connect a white composite cable from the camcorder LEFT AUDIO OUT, into the
LEFT AUDIO IN on the front of the TV.
3) Connect a red composite cable from the camcorder RIGHT AUDIO OUT, into the
RIGHT AUDIO IN on the front of the TV.
Note:
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the
LEFT AUDIO IN.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to an External Amplifier
TV Rear Panel
Speaker
Speaker
AUDIO OUT
Amplifier
1) Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the TV to
the LEFT AUDIO INPUT on the amplifier.
2) Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the TV to
the RIGHT AUDIO INPUT on the amplifier.
Notes:
• Refer to your amplifier’s manual for more information.
• You can use AUDIO OUTPUT for your home theater system.
Connecting to an amplifier using your optical output
You can connect an amplifier that has an optical digital input terminal by using an optical digital
cable from the optical output. This only effects digital channels.
TV Rear Panel
Amplifier
OPTICAL OUT
Digital
Audio
1) Connect the optical cable from the back of the TV to the back of the amplifier.
Notes:
• This terminal can only output digital audio.
• In order to use the optical output connection, select "PCM" or "DOLBY DIGITAL" on "Optical
Out" in Sound Adjust. See page 49.
• You can not output audio using the OPTICAL OUTPUT when you have digital sound from an
HDMI device connected to the HDMI 1 or HDMI 2 connection on the back of your TV. (See
page 18).
• Refer to your owners manual on using your amplifier.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to a Digital TV Receiver
By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in
their digital form.
TV Rear Panel
DTV device
1
Audio Out Digital Out
INPUT-3
INPUT-2
INPUT-1
L
R
DIGITAL-IN
2
S-VIDEO
S-VIDEO
OVER
VIDEO
L
OVER
VIDEO
L
VIDEO
AUDIO
AUDIO
R
AUDIO
R
HDMI to DVI Cable
After the connections have been made,
tighten the screw to secure the cables.
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to
the DIGITAL-IN 1 on the back of your television.
2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO INPUT
"INPUT-3" on the back of your television.
3) Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFT AUDIO INPUT
"INPUT-3" on the back of your television.
• The digital-in terminal is not compatible with the picture signal of a personal computer.
• Use a HDMI to DVI cable (commercially available) in order to digitally connect the television
with a DTV decoder.
Notes:
• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance
may be slightly shifted. Access the “Digital-In Size” in the External Input menu to adjust it.
(Refer to page 44.)
• When you do the above connection, set "Digital-In1 Audio" in the External Input menu to
ANALOG. See "Digital-In1 Audio", page 44.
• The Analog Audio input can only be used with the HDMI 1 input.
• When setting the “DIGITAL AUDIO – ANALOG / DIGITAL” menu setting on the TV, please note
that this setting only effects the HDMI 1 jack and that if you use a DVI to HDMI adapter this
connection must be made to the HDMI 1 along with analog audio cables.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to an HDMI Compatible Device
By connecting an HDMI compatible device, high definition pictures can be displayed on your
TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI
compatible devices.
HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all
digital audio/video interface. HDMI provides and interface between any audio/video source,
such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a
digital television (DTV).
HDMI Compatible Device
TV Rear Panel
Digital Out
1
DIGITAL-IN
2
HDMI Cable
1) Connect the HDMI Cable from the DIGITAL OUT on the back of your DTV or HDMI device, to
the DIGITAL-IN on the back of your television.
Notes:
• When you do the above connection, set "Digital-In1 Audio" in the External Input menu to
DIGITAL. See "Digital-In1 Audio", page 44.
• Some decoders may not respond depending on the equipment that you have connected
when it is connected to the HDMI.
• If the HDMI output device signal is changed (for example, 480i/60Hz is changed to
480p/60Hz), the screen may turn green and there may be some distortion for a short time
until the signal becomes stable.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to an AV Receiver using your television's
V1 Smart Input
By connecting your AV Receiver to your television's V1 Smart Input, you can watch picture
sources from many different devices, without having to change or use the other input
connections on your TV. This allows you to free up the other input connections so you can
connect more devices to your television.
TV Rear Panel
INPUT-3
INPUT-2
INPUT-1
AV Receiver
COMPONENT VIDEO
VIDEO-2 VIDEO-1
S-VIDEO
S-VIDEO
MONITOR
OUT
Y
P
P
OVER
VIDEO
L
OVER
VID
Y
B
R
VIDEO
L
AUDIO
R
b
r
MONITOR OUT
AUDIO
R
AUDIO
R
1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-1
on the back of your television.
2) Connect a Yellow Composite Cable from the AV Receiver's MONITOR OUT, into the VIDEO
INPUT-1 on the back of your television.
3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y
VIDEO INPUT-1 on the back of your television.
4) Connect a Blue Component Cable from the AV Receiver's PB MONITOR OUT, into the Pb
VIDEO INPUT-1 on the back of your television.
5) Connect a Red Component Cable from the AV Receiver's PR MONITOR OUT, into the Pr
VIDEO INPUT-1 on the back of your television.
Note:
• Please refer to your AV Receiver instruction manual for more information on connecting your
speakers and other devices like a DVD player.
• Use your AV Receiver's remote to switch to the different devices you have connected.
• Some AV Receivers may not respond when the V1 Smart Input function is turned on, see
page 49.
• If you have video connections for each input device connected to your AV Receiver, you
should not connect them using both S-Video and Composite connection at the same time
when you are using V1 Input as the V1 Smart Input. In this case we recommend using the
S-Video connection.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Step 3 – The Interactive Plug In Menu
When you turn your television on for the first time the interactive plug-in menu will appear. The
plug-in menu helps you to get your TV ready to use by letting you set your preferences for:
• The language in which you want the onscreen menus to appear.
• Setting the TV’s clock to the correct time so your timer functions will work properly. You can
choose “Auto” or “Manual” for setting the clock.
• The auto tuner setup of which channels you wish to receive.
We recommend you complete the interactive plug-in items before you start using your
television.
Note:
• If you press the MENU button while setting up the interactive plug-in menu, it will skip over it.
Language
After the “JVC Interactive Plug-in Menu” has been displayed, the TV automatically switches
to the "Language" settings. You can choose to view your onscreen menus in three languages:
English, French or Spanish.
Language/Langue/Idioma
è
To choose a language:
(English, Français or Español.)
English
†
To "Set"
Press the OK button
Set
Once you press OK, you will move to the
"Set Clock" Plug-In Menu automatically.
OK
MENU
Select
Operate
Exit
(To be continued...)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Auto Clock Set
Before you use any of your TV’s timer functions, you must first set the clock. You may
precisely set your clock using the XDS time signal broadcast by most public analog
broadcasting stations. If you do not have this in your area, you will have to set the clock
manually. See manual clock set below. To set the clock using the XDS signal:
Set Clock
è
†
To choose "Auto"
To "Time Zone"
Mode
Auto
: -- --
Time
--
è
To select your time zone: (Atlantic, Eastern,
Central, Mountain, Pacific, Alaska or
Hawaii)
Time Zone
D.S.T.
Atlantic
On
Set
†
è
†
To move to "D.S.T." (Daylight Savings Time)
To turn "On or Off"
To "set"
BACK
MENU
Select
Operate
Back
Exit
Press the OK button
Once you press OK, you will move to
the "Auto Tuner Setup" Plug-In Menu
automatically.
Notes:
• D.S.T. can be used when it is set to "On" in the "Set Clock" menu.
• Only when the "Mode" is set to "Auto", the Daylight Savings Time feature automatically
adjusts your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00
am on the first Sunday in April. The clock will move back one hour at 2:00 am on the last
Sunday in October.
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
Manual Clock Set
To set your clock manually (without using the XDS signal), choose "Manual". If you choose
"Auto", see auto clock set above.
è
†
To choose "Manual"
To "Time"
Set Clock
Mode
Manual
è
†
è
†
To set the hour
To minute
To set the minute
To "Time Zone"
Time
10
:
30 AM
Time Zone
D.S.T.
Atlantic
On
Set
è
To select your time zone: (Atlantic, Eastern,
Central, Mountain, Pacific, Alaska or
Hawaii)
BACK
MENU
Select
Operate
Back
Exit
†
è
†
To move to "D.S.T." (Daylight Savings Time)
To turn "On or Off"
To "Set"
Press the OK button
Once you press OK, you will move to
the "Auto Tuner Setup" Plug-In Menu
automatically.
Note:
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
(To be continued...)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Auto Tuner Setup
In auto tuner setup, the TV automatically scans through all available channels, memorizing the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.
Auto Tuner Setup
è
To choose "Cable or "Air" (or "Skip" when
you skip "Auto Tuner Setup")
Tuner Mode
Scan Mode
Air
Auto
π†
è
To Scan Mode
To choose Auto, STD, HRC or IRC
Start
†
To "Start"
Press the OK button
OK
BACK
MENU
Select
Operate
Back
Exit
Now programming ...
20
When the setup is finished, "Thank you ! Setup is now complete." is displayed. Your quick
setup is now complete. You can now begin watching your television, or you can continue
on in this guide for more information on programming your remote control, or using the
JVC onscreen menu system to customize your television viewing experience.
Notes:
• If you want to cancel the Auto Tuner Setup, press the MENU button.
• Noise muting will not work during Auto Tuner Setup.
• If you choose "Skip", it finished without doing the Auto Tuner Setup.
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is
normal.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Programming your remote control
You can program your remote to operate your cable box, satellite receiver, VCR or DVD
player by using the instructions and codes listed below. If the equipment does not respond to
any of the codes listed below or to the code search function, use the remote control supplied
by the manufacturer.
Cable Box or Satellite Codes
The remote control is programmed with cable box and satellite codes for power on/off,
channel up/down, and 10 key operation.
1) Find the cable box or satellite brand from the list of codes shown below.
2) Slide the 2-way selector switch to “CATV”.
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10
key pad.
4) Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.
• If your cable or satellite box does not respond to the first code, try the others listed. If it does
not respond to any code, try the search codes function, on page 26.
Cable Box
ABC
CODES
024
Cable Box
Puser
CODES
032
Digital
Satellite
Systems
CODES
Archer
032, 025
051, 032
022, 051
058, 059
024, 032, 025
029
RCA
061, 070
032
Echostar
100, 113, 114,
115
Cableview
Citizen
Realistic
Regal
058, 064, 040,
041, 042, 045,
068
Express VU
G.E.
100, 113
Curtis
106
Diamond
Eagle
Regency
034
G.I.
108
Rembrandt
037, 032, 051,
038
Gradiente
Hitachi
112
Eastern
GC Brand
Gemini
034
032, 051
022, 043
104, 111
Samsung
051
HNS (Hughes)
Scientific Atlanta 057, 058, 059
104
General Instrument 065, 024, 025,
026, 027, 020,
021, 022, 057,
SLMark
051, 047
051, 056
032, 051
Panasonic
Philips
105
Sprucer
Stargate
102, 103
023
Primestar
108
Hamlin
040, 041, 042,
045, 058, 064
049, 024
Telecaption
Teleview
Texscan
Tocom
067
Proscan
RCA
106, 109, 110
106, 109, 110
Hitachi
Jerrold
047, 051
044
065, 024, 025,
026, 027, 020,
021, 022, 057,
023
Sony
107
035, 036, 066
050
Star Choice
104, 108
Toshiba
Unika
Toshiba
Uniden
101
Macom
049, 050, 051,
054
102, 103
032, 025
Universal
Videoway
Viewstar
Zenith
022, 032
052
Magnavox
033
030
Memorex
Movietime
029, 030
063, 046
046
032, 051
039, 037, 048
Oak
Panasonic
055, 056, 060,
071, 073
Zenith/Drake
Satellite
Paragon
Philips
063
028, 029, 030,
052, 053, 031,
069
Pioneer
Pulsar
047, 062
051, 032
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
VCR Codes
The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,
rewind, pause, record, channel up/down operation.
1) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10
key pad.
4) Release the DISPLAY button, and confirm the operation of the VCR.
• If your VCR does not respond to the first code, try the others listed. If it does not respond to
any of the codes, try the search codes function on page 26.
• After you program your remote, some VCR buttons may not work properly. If so, use the
VCR’s remote.
• To record, hold down the REC button on the remote and press PLAY.
VCRs
CODES
035
027, 032, 095
VCRs
CODES
VCRs
CODES
Admiral
Aiwa
Marantz
Marta
003, 004, 005
064
Samsung
037, 060, 062,
033, 089
Samtron
Sansui
089
Akai
029, 072, 073, Memorex
074
024, 067
003, 026, 020,
052
038, 040, 047,
048, 041, 042
MGA
Audio Dynamic 003, 005
Sanyo
Scott
063, 067, 091,
071
Bell & Howell
Broksonic
Canon
063, 071
020, 026, 094
023, 025
043
Minolta
058, 045, 093
Mitsubishi
038, 040, 047,
048, 041, 042,
078, 090
059, 060, 062,
067, 038, 040,
047, 048, 026,
020
CCE
Multitech
NEC
047, 027, 062
Citizen
064
003, 004, 005,
000
Sears
063, 064, 065,
066, 058, 000,
001
Craig
063, 029, 064
Curtis Mathes
045, 024, 027,
093
Olympic
024, 023
Shintom
Sharp
075
Optimus
028, 021, 035,
064
Daewoo
043, 059, 024,
092
035, 036, 080,
088
026, 020
Orion
DBX
003, 004, 005
Panasonic
023, 024, 021,
022
Signature 2000 027, 035
Dimensia
Emerson
045, 093
Singer
Sony
075
043, 026, 077,
061, 025, 042,
020, 076
Penney
024, 058, 045,
063, 003, 004,
005, 093
028, 029, 030,
053, 054, 055
SV 2000
Sylvania
027
Fisher
Funai
063, 066, 067,
065, 071, 091
Pentax
Philco
058, 005, 045,
093
031, 023, 024,
027
027, 026, 020,
000
031, 024, 027,
023, 026, 020,
043
Symphonic
Tashiro
Tatung
027, 081
064
033, 045, 024
G.E.
Philips
031, 023, 024,
086
003, 004, 005
Go Video
037, 051, 049,
050, 089
Teac
003, 004, 027,
005
Pioneer
Proscan
023
Goldstar
064
045, 058, 023,
024, 031, 046,
059, 060, 033,
087, 093
Technics
021, 022, 023,
024
Gradiente
083, 084, 081,
000, 001
Teknika
Toshiba
024, 027, 070
059, 046, 079
Hitachi
023, 045, 058,
027, 081, 093
Quasar
021, 022, 023,
024
Vector Research 005
Instant Replay 024, 023
Wards
Yamaha
Zenith
035, 036, 067,
044, 064
Radio Shack
033, 024, 063,
036, 067, 040,
027
Jensen
JVC
003
000, 001, 002,
003, 004, 005
063, 003, 004,
005
033, 045, 058,
023, 024, 031,
046, 059, 060,
083, 084, 085,
087, 093
RCA
Kenwood
LXI
003, 004, 064,
005
044, 082, 064,
094
027, 064, 058,
065, 066, 063,
067
Realistic
024, 063, 036,
067, 040, 027
Magnavox
031, 023, 024,
086
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
DVD Codes
The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,
rewind, previous/next chapter, tray open/close, and still/pause operation.
1) Find the DVD player brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10
key pad.
4) Release the DISPLAY button, and confirm the operation of the DVD player.
• If your DVD player does not respond to the first code, try the others listed. If it does not
respond to any of the codes, try the search codes function on page 26.
• After you program your remote, some DVD buttons may not work properly. If so, use the
DVD player’s remote.
DVD Player
Aiwa
CODES
043
DVD Player
RCA
CODES
021, 026
Apex
040
Sampo
Samsung
Sharp
034
030
028
038
Denon
Hitachi
JVC
020, 037
030, 031
000
Silvania
Sony
Kenwood
Konka
035
024, 045, 046,
047
039
Mitsubishi
Onkyo
Oritron
Panasonic
Philips
Pioneer
Raite
025
Technics
Toshiba
Vialta
020
041
023
044
050
020
Wave
042
023, 036
022
Yamaha
Zenith
020
027, 032
033
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Search Codes
Cable/Satellite Search Codes Function
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press the POWER and RETURN+/TV buttons. Hold for at least three seconds and release.
3) Press the POWER button on the remote, and see if the cable or satellite box responds.
4) If there was a response, press RETURN+/TV. The codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use
the remote control that came with your equipment.
5) Press RETURN+/TV to exit.
VCR/DVD Search Codes Function
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or
“DVD”.
2) Press the VCR or DVD POWER and RETURN+/TV buttons. Hold for at least three seconds
and release.
3) Press the VCR or DVD POWER button, and see if the VCR or DVD responds.
4) If there was a response, press RETURN+/TV. The codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for
the DVD player), and there is no response, use the remote control that came with your
equipment.
5) Press RETURN+/TV to exit.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
Using the Guide
Certain symbols are used throughout this guide to help you learn about the features of your
new television. The ones you will see most frequently are:
π† Up and Down arrows mean press the CH+ or CH– buttons. Pressing the CH+ or CH–
buttons let you:
• Move vertically in a main menu screen
• Move through a submenu screen
• Move to the next letter, number, or other choice in a submenu
• Back up to correct an error
• Scan through TV channels (when not in a menu screen)
è Left and right arrows mean press the VOLUME+ or VOLUMEРbuttons to move left or right
to:
• Select a highlighted menu item
• Select an item in a submenu
• Select numbers in certain menu options
• Turn the volume up or down (when not in a menu screen)
The “press button” icon means you should press the button named on your remote
control. (Button names appear in SMALL CAPITAL LETTERS.)
The “helping arrow” icon points to the highlighted or selected item in a menu.
To bring up the onscreen menu, press the MENU button on the remote control. The following
(left) main menu will appear. The item that appears in green is the one currently selected. If
you use the MENU button on the TV’s front panel instead of the remote, Front Menu screen
showing "Input", "Video Status", "Aspect" and "Menu" will appear (following right screen). The
“Interactive Plug-in Menu” will appear the first time the TV is plugged in.
Menu
Front Menu
TV
Input
Initial Setup
Standard
Panorama
Video Status
Aspect
–
+
Tuner Setup
Menu
External Input
Picture Adjust
Sound Adjust
Exit
MENU
Select
Operate
Clock/Timers
Interactive Plug-in Menu
Note:
• Menus shown in this book are illustrations, not exact replications of the television’s onscreen
displays.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
The Onscreen Menu System
Your television comes with JVC’s onscreen menu system. The onscreen menus let you make
adjustments to your television’s operation simply and quickly. All menus are navigated from
the Main Menu at first. Detailed explanations on using each menu follow later in this guide. For
information about the interactive plug-in Menu, see pages 20 - 22.
1. To open the onscreen menu system, press the MENU button on the remote control. The
main menu will appear
Menu
Initial Setup
–
+
Tuner Setup
External Input
Picture Adjust
Sound Adjust
Clock/Timers
Interactive Plug-in Menu
2. To select a menu from the main menu, use the π†arrows and enter by using the √®
arrows or OK button.
The selected feature and option on a menu screen are highlighted in a different color.
To move to a different feature, use the π†arrows to move up and down the list.
3. There are two methods to select an option in a menu, after selecting a menu using the π†
arrows.
1) Use the è arrows to select an option from the highlighted feature. (In this guide, we
discuss this method).
–
+
Auto Tuner Setup
2) Press the OK button. The right onscreen will
appear. Use the π†arrows to select an option
from the box and press the OK button.
Tuner Mode
Scan Mode
Cable
Auto
Auto
STD
HRC
IRC
• To go back to the previous screen, press the BACK
button.
Sta
OK
BACK
MENU
4. Pressing MENU on the remote control will close the
onscreen menu system and return you to normal
television viewing.
Select
Operate
Back
Exit
Each menu and its features will be discussed in the following pages of this guide.
Notes:
• If you do not press any buttons for a few seconds, the onscreen menu will automatically
shut off.
• Button names in this guide are shown in SMALL CAPITAL LETTERS.
• Menus may appear in different sizes onscreen depending on the aspect ratio selected.
• Some menu items may not appear in menu screens when certain aspect ratios or inputs
are selected.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
Initial Setup
1/2
Initial Setup
2/2
From the
Noise Muting
Language
On
English
Off
Auto Shut Off
Software Version
Tilt Correction
On
Main Menu...
Front Panel Lock
V-Chip
Set Lock Code
Closed Caption
BACK
MENU
BACK
MENU
Select
Operate
Back
Exit
Select
Operate
Back
Exit
Initial Setup 1/2
Initial Setup 2/2
–
+
Tuner Setup
Auto Tuner Setup
Channel Summary
Find Channel
Digital Antenna Level
BACK
MENU
Select
Operate
Back
Exit
Tuner Setup
External Input
Digital-In Size
Auto
Digital
Digital-In1 Audio
Video Input Label
BACK
MENU
Select
Operate
Back
Exit
External Input
Picture Adjust
1/2
Standard
Picture Adjust
2/2
Video Status
Video Status
Standard
Off
Tint
0
0
0
0
0
Noise Reduction
VSM
Color
On
On
Picture
Natural Cinema
Position Adjustment
Reset
Bright
Detail
Color Temperature
Low
BACK
MENU
BACK
MENU
OK
OK
Select
Operate
Back
Exit
Select
Operate
Back
Exit
Picture Adjust 1/2
Picture Adjust 2/2
Sound Adjust
Bass
0
0
0
Treble
Balance
Optical Out
Turn On Volume
Volume Limit
PCM
Current
20
Reset
MENU
BACK
Select
Operate
Back
Exit
Sound Adjust
Clock/Timers
Set Clock
On / Off Timer
BACK
MENU
Select
Operate
Back
Exit
Clock/Timers
Notes:
• The "Digital-In Size" menu can only be displayed when a 480p picture signal is input to the
digital-in terminal and the picture is being displayed on the screen.
• For the Interactive Plug-In Menu, see page 20.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Noise Muting
This feature inserts a blank black screen over channels which are not broadcasting or are too
weak to be received clearly.
Initial Setup
1/2
Press the MENU button
Noise Muting
Language
On
English
Off
π†
è
π†
è
To "Initial Setup"
To enter
To "Noise Muting"
To turn "On" or "Off"
Press the MENU button when finished
Front Panel Lock
V-Chip
Set Lock Code
Closed Caption
BACK
MENU
Select
Operate
Back
Exit
Note:
• Noise muting will not work when you operate channel summary.
Language
The language function is described on page 20 as the interactive plug-in menu. If you need to
choose the language again, follow the steps below.
Initial Setup
1/2
Press the MENU button
Noise Muting
Language
On
English
Off
π†
è
π†
To "Initial Setup"
To enter
To "Language"
Front Panel Lock
V-Chip
Set Lock Code
Closed Caption
è
To choose a language: English, French or
Spanish
Press the MENU button when finished
BACK
MENU
Select
Operate
Back
Exit
Front Panel Lock
This allows you to lock the keys on the front of the TV, so that a child may not accidentally
change your viewing preferences.
Press the MENU button
Initial Setup
1/2
Noise Muting
Language
On
English
Off
π†
è
π†
è
To "Initial Setup"
To enter
To "Front Panel Lock"
To turn "On" or "Off"
Press the MENU button when finished
Front Panel Lock
V-Chip
Set Lock Code
Closed Caption
BACK
MENU
Select
Operate
Back
Exit
You can turn off this feature in the following ways:
• Unplug the power cord, and plug it back in. Do this if your batteries die, or you lose your
remote control.
• Use the remote control.
• Press the MENU button on the front of the TV for more than 3 seconds. In this case, the OSD
for "Front Panel Lock" will appear.
Note:
• To turn ON/OFF the TV, press the POWER button for more than 3 seconds. This feature will
remain ON.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
V-Chip
Your TV is equipped with V-Chip technology which enables you to block channels or content
that you feel to be inappropriate for children, based on US and Canada rating guidelines.
V-Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection.
Note: Some programs, and movies are broadcast without a ratings signal. Even if you set
up V-CHIP ratings limits, these programs will not be blocked. See page 36 for information on
how to block unrated programs.
Note (for Canadian viewers): The V-Chip function is based on specifications designed for
the United States and therefore may not work properly in Canada.
You can customize the V-Chip settings of your television to match your personal tastes. The
V-Chip menu below is the starting point for your V-Chip settings
You can use US V-Chip settings (for programming broadcast from the United States), Canadian
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use
any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting
each of the three V-Chip formats appear in the next six pages along with descriptions of the
rating categories.
To access the rating categories:
Initial Setup > V-Chip
Press the MENU button
V-Chip
Off
π†
è
π†
è
To "Initial Setup"
To enter
To "V-Chip"
To operate (Password input screen will
appear)
Set US TV Ratings
Set Movie Ratings
Set Canadian Ratings English
Set Canadian Ratings French
Unrated
View
BACK
MENU
Select
Operate
Back
Exit
Enter the password by using the 10 button
keypad
The V-Chip main screen will appear when the password is correct.
è
To turn V-Chip "On" or "Off" (V-Chip must be turned "On" for rating settings to
operate)
π†
To move to V-Chip menu (see following pages for descriptions of each item)
Notes:
• If you input the wrong password, go back to the initial Setup Menu.
• To set the password, see "Set Lock Code", page 37.
• "Advanced V-Chip Rating" and "Advanced Canadian Rating" menus may be displayed
sometimes between "Set Canadian Ratings French" and "Unrated". These menus are
reserved for future use, as of February 2006.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
US V-Chip Ratings
U.S. PARENTAL RATING SYSTEMS
Programs with the following ratings are appropriate for children.
❒ TV Y is Appropriate for All Children
Programs are created for very young viewers and should be suitable for all ages, including
children ages 2 - 6.
❒ TV Y7 is for Older Children
Most parents would find such programs suitable for children 7 and above. These programs
may contain some mild fantasy violence or comedic violence, which children should be able
to discern from reality.
Programs with the following ratings are designed for the entire audience.
❒ TV G stands for General Audience
Most parents would find these programs suitable for all age groups. They contain little or no
violence, no strong language, and little or no sexual dialog or situations.
❒ TV PG Parental Guidance Suggested
May contain some, but not much, strong language, limited violence, and some suggestive
sexual dialog or situations. It is recommended that parents watch these programs first, or
with their children.
❒ TV 14 Parents Strongly Cautioned
Programs contain some material that may be unsuitable for children under the age of 14
including possible intense violence, sexual situations, strong coarse language, or intensely
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.
❒ TV MA Mature Audiences Only
These programs are specifically for adults and may be unsuitable for anyone under 17
years of age. TV MA programs may have extensive V, S, L, or D.
Viewing Guidelines
In addition to the ratings categories explained above, information on specific kinds of content
are also supplied with the V-Chip rating. These types of content may also be blocked. The
content types are:
• V/FV is for VIOLENCE/FANTASY VIOLENCE
• S stands for SEXUAL CONTENT
• L stands for strong LANGUAGE
• D stands for suggestive DIALOG
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Setting US V-Chip Ratings
Press the MENU button
Initial Setup > V-Chip
π†
è
π†
è
To "Initial Setup"
To enter
To "V-Chip"
To operate (Password input screen will
appear)
V-Chip
Off
Set US TV Ratings
Set Movie Ratings
Set Canadian Ratings English
Set Canadian Ratings French
Unrated
View
Enter the password by using the 10 button
keypad
BACK
MENU
Select
Operate
Back
Exit
The V-Chip main screen will appear
è
π†
è
To turn V-Chip "On" or "Off"
To move to "Set US TV Ratings"
To operate
Directions to set US V-Chip Ratings
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and
press the π† or √® to move the cursor to the correct location. Press OK to turn the locking
feature on or off. An item is locked if the
icon appears instead of a “—”.
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that
column and add a lock icon. Once you’ve put a lock on the top row, everything in that column
is automatically locked.
Set US TV Ratings
π†√® To the TV 14 Column
TV
MA
TV
14
TV
PG
TV
G
TV
Y7
TV
Y
Press the OK button to lock
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
Press the MENU button when finished
V/FV
S
L
D
Note:
OK
BACK
MENU
Select
Operate
Back
Exit
• If you want to change the setup, move the cursor to
the top column and change the lock icon to “—” by
pressing OK again. You may then select individual
categories to block.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Movies Ratings
❒ NR – Not Rated
This is a film which has no rating. In many cases these films were imported from countries
which do not use the MPAA ratings system. Other NR films may be from amateur producers
who didn’t intend to have their film widely released.
NR (Not Rated) Programming may contain all types of programming including children’s
programming, foreign programs, or adult material.
❒ G – General Audience
In the opinion of the review board, these films contain nothing in the way of sexual content,
violence, or language that would be unsuitable for audiences of any age.
❒ PG – Parental Guidance
Parental Guidance means the movie may contain some contents such as mild violence,
some brief nudity, and strong language. The contents are not deemed intense.
❒
PG-13 – Parents Strongly Cautioned
Parents with children under 13 are cautioned that the content of movies with this rating may
include more explicit sexual, language, and violence content than movies rated PG.
❒ R – Restricted
These films contain material that is explicit in nature and is not recommended for
unsupervised children under the age of 17.
❒ NC-17 – No One Under 17
These movies contain content which most parents would feel is too adult for their children
to view. Content can consist of strong language, nudity, violence, and suggestive or explicit
subject matter.
❒ X – No One under 18
Inappropriate material for anyone under 18.
Directions to set Movie (MPAA) Ratings
Press the MENU button
π†
è
π†
è
To "Initial Setup"
To enter
To "V-Chip"
To operate (Password input screen will appear)
Enter the password by using the 10 button keypad
The V-Chip main screen will appear
To turn V-Chip "On" or "Off"
è
π†
è
To "Set Movie Ratings"
To enter movies menu
For example:
To block viewing of X and NC-17 rated from shows:
Set US Movie Ratings
è
è
To the X Column
NC
PG
13
X
R
_
PG
_
G
_
NR
_
Press the OK button to lock
To the NC-17 Column
17
_
_
Press the OK button to lock
Press the MENU button to finish
OK
BACK
MENU
Select
Operate
Back
Exit
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Canadian V-Chip Ratings
❒ E – Exempt
Exempt programming includes: news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
❒ C – Programming Intended for Children
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or
unrealistic in nature.
❒ C8+ – Programming Intended for Children 8 and Over
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low
intensity and will show the consequences of the acts. There will be no offensive language,
nudity or sexual content.
❒ G – General Audience
Programming will contain little violence and will be sensitive to themes which could affect
younger children.
❒ PG – Parental Guidance
Programming intended for a general audience, but which may not be suitable for younger
children. Parents may consider some content not appropriate for children aged 8-13.
❒ 14+ – 14 Years and Older
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and
early teens. Programming may contain mature themes and scenes of intense violence.
❒ 18+ – Adult
Material intended for mature audiences only.
Directions to set Canadian V-Chip Ratings
Press the MENU button
π†
è
π†
è
To "Initial Setup"
To enter
To "V-Chip"
To operate (Password input screen will appear)
Enter the password by using the 10 button keypad
The V-Chip main screen will appear
To turn V-Chip "On" or "Off"
è
π†
è
Set Canadian Ratings English
To "Set Canadian Ratings English"
To enter ratings menu
18+
_
14+
_
PG
_
G
_
C8+
_
C
_
For example:
To block viewing of programming rated 14+ and 18+:
è
To the 18+ Column
OK
BACK
MENU
Select
Operate
Back
Exit
Press the OK button to lock
To the 14+ Column
è
Press the OK button to lock
Press the MENU button to finish
Note:
• For instructions on “Set Canadian Ratings Fre (in French)”, please see page 35 in the
French side of this user’s guide.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Unrated Programs
Unrated programming refers to any programming which does not contain a rating signal.
Programming on television stations which do not broadcast rating signals will be placed in the
“Unrated Programming” category.
Examples of Unrated programs:
• Emergency Bulletins
• News
• Public Service Announcements
• Sports
• Locally Originated Programming
• Political Programs
• Religious Programs
• Weather
• Some Commercials
Note:
• TV programs or movies that do not have rating signals will be blocked if the unrated category
is set to "Block".
Directions to Block Unrated Programs
You can block programs that are not rated.
Press the MENU button
Initial Setup > V-Chip
π†
è
π†
è
To "Initial Setup"
To enter
To "V-Chip"
V-Chip
Off
Set US TV Ratings
Set Movie Ratings
Set Canadian Ratings English
Set Canadian Ratings French
Unrated
To operate (Password input screen will appear)
View
Enter the password by using the 10 button
keypad
BACK
MENU
Select
Operate
Back
Exit
The V-Chip main screen will appear
è
π†
è
To turn V-Chip "On" or "Off"
To "Unrated"
To "View" or "Block"
Press MENU when done
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Set Lock Code
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes pre-
set with a lock code of “0000”. You may change the code to any four-digit number you wish. To
change the lock code, follow the steps below.
Press the MENU button
Initial Setup > Set Lock Code
π†
è
π†
è
To "Initial Setup"
To enter
To "Set Lock Code"
To operate (Password input screen will appear)
Lock Code
0
1
2
3
Set
Clear
Enter the password by using the 10 button
keypad
OK
BACK
MENU
Select
Operate
Back
Exit
The Set Lock Code screen will appear
To set the password, use the 10 button keypad
Press the OK button to finish (your lock code is now set)
When a viewer attempts to watch a blocked channel,
this message appears:
This programming exceeds
your rating limits.
Please enter lock code
The channel will remain blocked until the correct lock
code is entered (see above for information on setting
your lock code).
by 10 key pad to unlock it.
No. - - - -
Notes:
• After a power interruption you must reset the lock code.
• Write your lock code number down and keep it hidden from potential viewers.
• If you forget the lock code, a new code may be set using the steps listed above.
Channel Guard Message
When a viewer attempts to watch a guarded channel, the following message appears:
To watch a channel that you have locked, enter the
This channel is locked
Lock Code using the 10 key pad.
by channel guard.
Please enter lock code
by 10 key pad to unlock it.
No. - - - -
If the wrong code is entered, the message "invalid lock
code !” will flash on the screen.
The channel cannot be accessed until the correct code
is entered.
Notes:
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.
• See also “Set Lock Code”, page 37.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Closed Caption
Many broadcasts now include an onscreen display of dialog called closed captions. Some
broadcasts may also include displays of additional information in text form. Your television can
access and display this information using the closed caption feature. To activate the closed
caption feature, follow the steps below.
Auto Setting
Press the MENU button
Initial Setup > Closed Caption
Preview
π†
è
π†
è
π†
è
To "Initial Setup"
To enter
To "Closed Caption"
To enter
To "Type"
To select Auto, Advanced or Basic
Closed Caption sample
Type
Auto
Text1
1
Analog Service
Digital Service
Appearance
Reset
OK
BACK
MENU
Select
Operate
Back
Exit
Auto: Shows closed caption a priority for
digital channels over analog channels. It is set automatically.
Advanced: Shows only the digital closed caption.
Basic: Shows only the analog closed caption.
π†
è
π†
è
π†
è
è
To "Analog Service"
To select a caption (CC1 to CC4) or text channel (Text1 to Text4)
To "Digital Service"
To select 1, 2, 3, 4, 5 or 6
To Appearance
To enter
To select "Auto" ("Manual", see page 39)
Press the MENU button when finished
Notes:
• If you want to reset your settings to the default settings, select "Reset".
• If you select "Advanced" for Type, you cannot select "Analog Service".
• If you select "Basic" for Type, you cannot select "Digital Service" and "Appearance".
• "Type", "Digital Service" and "Appearance" are for digital broadcasting. It has no
effect for analog broadcasting.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Manual Setting
è
To select "Manual" for Appearance Mode
Closed Caption > Appearance
Preview
1/2
π†
To "Font Size", "Font Style", "Text/Edge
Opacity", "Background Opacity", "Text Color",
"Edge Color" or "Backgrond Color".
Closed Caption sample
Appearance Mode
Font Size
Manual
Standard
Auto
Font Style
Text / Edge Opacity
Background Opacity
Solid
Solid
è
To select the setting you like
BACK
MENU
Select
Operate
Back
Exit
Font Size: Auto, Standard, Large or Small
Font Style: Auto, SerifMono, Serif, SanSerifMono,
SanSerif, Casual, Cursive or SmallCapital
Closed Caption > Appearance
Preview
2/2
Text/Edge Opacity, Background Opacity: Auto,
Closed Caption sample
Transparent, Translucent, Solid, Flashing.
Text Color
White
White
Black
Edge Color
Text Color, Edge Color, Background Color: Auto,
White, Black, Red, Green, Blue, Yellow, Magenta, or
Cyan
Background Color
OK
BACK
MENU
Select
Operate
Back
Exit
Press the MENU button when finished
All fonts used for digital closed
caption and digital menus are
licensed from Monotype Imaging
Inc.
Notes:
• Closed caption subtitles are usually found on closed caption channel CC1. Some programs
may include additional text information which is usually found on text channel T1. The other
channels are available for future use.
• Closed captioning may not work correctly if the signal being received is weak or if you are
playing a video tape.
• Most broadcasts containing closed captioning will display a notice at the start of the program.
• To select the mode, press the C.C. button. See page 56.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Auto Shut Off
This function automatically shuts off your TV when there is no signal from the channel the
TV is on.
Press the MENU button
Initial Setup
2/2
π†
è
π†
è
To "Initial Setup"
To enter
To "Auto Shut Off"
To turn "On" or "Off"
Auto Shut Off
Software Version
Tilt Correction
On
Press the MENU button when finished
BACK
MENU
Select
Operate
Back
Exit
• If the channel that you have on does not receive a
signal for more than one minute, the blinking text “No
Program or Weak Signal Auto shut off in 9 min.” appears on the screen, and starts the
countdown. If no signal is being received within 10 minutes, the TV shuts itself off.
Software Version
You can confirm the Software Version.
Press the MENU button
Initial Setup
2/2
π†
è
π†
è
è
To "Initial Setup"
To enter
To "Software Version"
To enter
Select close when you are finished confirming
your software version
Auto Shut Off
Software Version
Tilt Correction
On
BACK
MENU
Select
Operate
Back
Exit
Press the MENU button when finished
Tilt Correction
This adjusts the pictures so that it looks even on the screen and not lopsided.
Press the MENU button
Initial Setup
2/2
π†
è
π†
è
è
To "Initial Setup"
To enter
To "Tilt Correction"
To enter
Auto Shut Off
Software Version
Tilt Correction
On
To adjust Tilt Correction
BACK
MENU
Select
Operate
Back
Exit
Press the MENU button when finished
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Setup
Auto Tuner Setup
The auto tuner setup function is described on page 22 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
–
+
Press the MENU button
Tuner Setup > Auto Tuner Setup
Tuner Mode
Scan Mode
Cable
Auto
π†
è
π†
è
è
π†
è
†
To "Tuner Setup"
To enter
To "Auto Tuner Setup"
To enter
To choose "Cable" or "Air"
To "Scan Mode"
To choose "Auto", "STD", "HRC" or "IRC"
To "Start"
Start
BACK
MENU
Select
Operate
Back
Exit
Press the OK button (Programming will take serveral minutes)
The auto tuner is finished when the message "Programming Over !" appears onscreen.
Press the MENU button when finished
Notes:
• When the Tuner Mode is set to "Cable", it is possible to select "Scan Mode"
• If no channels were found using Auto Tuner Setup, check your antenna cable and the
settings for Tuner Mode/Scan Mode.
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV.
Regarding analog channels, you can add or delete channels from the line-up or prevent any
unauthorized viewers from watching any or all 191 channels. Regarding digital channels, the
only channels that will appear are the ones that are broadcasting.
Press the MENU button
π†
è
π†
è
To "Tuner Setup"
To enter
To "Channel Summary"
To operate
–
+
Tuner Setup > Channel Summary
Ch No.
001
Scan
Station
FOX
002
003
004
005
006
ABC
CNN
NBC
BOX
NHK
The Channel summary screen will now be displayed with
the channels set to scan marked with an “√”. Regarding
analog channels, you can delete channels from the scan
by removing the “√”. If any channels were missed during
auto tuner setup and you wish to add them, you may by
placing an “√” next to the channel number.
OK
BACK
MENU
Select
Operate
Back
Exit
• Digital channels can not be added to the channel summary if the auto tuner setup did not
find them.
π†√® To the "Scan" column
Press the OK button to include or delete from scan
Press the MENU button when finished
Note:
• The number of a digital channel may change, depending on the time of some broadcastings.
If this channel existed and now had disappeared, the lock channel or scanned channel by the
channel summary for that channel will be cancelled.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Setup
How to set the channel station.
Press the MENU button
–
+
Tuner Setup > Channel Summary > Station
π†
è
π†
è
π†
To "Tuner Setup"
To enter
To "Channel Summary"
To operate
A
B
C
Channel 10
Set
Reset
To "Station"
BACK
MENU
Select
Operate
Back
Exit
Press the OK button to enter
è
π†
To select the character you want
To move to the next space
...continue to follow these directions for all seven spaces
To "Set"
†
Press the OK button
Your characters are now set
Press the MENU button when finished
If you want to reset the characters you set:
Press the MENU button
π†
è
π†
è
π†
To "Tuner Setup"
To enter
To "Channel Summary"
To operate
To "Station"
Press the OK button to enter
To select "Reset"
π†
Press the OK button to finish
Your characters are now reset
Notes:
• You can use characters for: Alphabet, numbers, marks and spaces.
• It is possible to set the maximum of 500 channel labels.
• If you try to set more than the 500 maximum, the message "Memory Overflow" will appear.
You can block access to a channel by activating the channel lock.
Press the MENU button
π†
è
π†
è
To "Tuner Setup"
To enter
To "Channel Summary"
To operate
π†√® To the Lock Column (
)
Press the OK button to lock or unlock that channel
Press the MENU button when finished
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Setup
Find Channel
Add a channel that does not exist in the channel map.
–
+
Press the MENU button
Tuner Setup
Auto Tuner Setup
Channel Summary
Find Channel
π†
è
π†
è
To "Tuner Setup"
To enter
To "Find Channel"
To enter
Find Channel
Digital Antenna Level
Channel Num.
Add
123_
Cancel
Add a channel using 0 to 9
0
9
OK
BACK
MENU
.
.
.
Select
Operate
Back
Exit
†
To "Add"
Press the OK button to finish
Digital Antenna Level
Confirms the present antenna level.
Antenna Level
Press the MENU button
80
π†
To "Tuner Setup"
To enter
BACK
MENU
è
Back
Exit
π†
To "Digital Antenna Level"
To enter
è
Note:
• If you are watching an analog channel, antenna level will not appear.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
External Input
Digital-In Size
The DIGITAL-IN option can only be displayed in the External Input menu when an HDMI480p
picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when
an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of
HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the
position can be adjusted by selecting either Auto, Size1 or Size2.
Press the MENU button
External Input
Digital-In Size
Auto
π†
è
π†
è
π†
To "External Input"
To enter
To "Digital-In Size"
To enter
Digital-In1 Audio
Video Input Label
Digital
To select "Auto", "Size1" or "Size2"
BACK
MENU
Select
Operate
Back
Exit
Press the MENU button to finish
Notes:
• The Digital-In Size menu can only be displayed when a HDMI or DVI 480p picture signal is
input to the Digital-In terminal and the picture is being displayed on the screen.
• You can select "Auto" only when the signal is 480p for HDMI. When you select "Auto", the
televison will select "Size1" or "Size2" automatically.
Digital-In1 Audio
This feature is used if you have a DTV or HDMI compatible component connected to your TV.
Press the MENU button
External Input
π†
è
π†
è
To "External Input"
To enter
To "Digital-In1 Audio"
To select "Analog", "Digital" or "Auto"
Digital-In Size
Auto
Digital-In1 Audio
Video Input Label
Digital
Press the Menu button when finished
BACK
MENU
Select
Operate
Back
Exit
Notes:
• If your DTV or HDMI component is capable of digital
audio and video, choose "Digital". If your DTV or HDMI
component is capable of analog audio and digital video, choose "Analog".
• Refer to your DTV or HDMI component’s instruction manual for more information.
• When you select "Auto", the television will select "Analog" or "Digital" automatically, depending
on the audio input from the HDMI.
• When you select "Digital", select PCM on Optical Out in Sound Adjust menu. See page 49.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
External Input
Video Input Label
This function is used to label video input connections for the onscreen displays.
Press the MENU button
External Input
π†
è
π†
è
π†
è
To "External Input"
To enter
Digital-In Size
Auto
Digital-In1 Audio
Video Input Label
Digital
To "Video Input Label"
To operate
BACK
MENU
Select
Operate
Back
Exit
To select the desired video input
To select the desired preset input label (see
chart below)
External Input > Video Input Label
†
To "Set"
Video-1
VCR
Video-2
DVD
SAT
Press the OK button to save
Press the MENU button when finished
Video-3
Video-4
GAME
D-VHS
PVR
Digital-In1
Digital-In2
Set
OK
BACK
MENU
Select
Operate
Back
Exit
Preset
Labels
Select when...
VCR
DVD
PVR
You have a VCR connected to the video input
You have a DVD connected to the video input
You have a Personal Video recorder connected to the video input
D-VHS You have a Digital VCR connected to the video input
STB
SAT
AMP
You have a Set-top Box connected to the video input
You have a Satellite Receiver connected to the video input
You have an Amplifier connected to the video input
GAME You have a Video Game connected to the video input
CAM
DISC
You have a Video Camera connected to the video input
You have a Video Disc player connected to the video input
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust
Picture Settings
These settings allow you to change and adjust the way the picture appears on your television.
Tint
Tint allows you to adjust the levels of red and green in your TV picture.
Color
The color function lets you make all the colors in the TV picture appear either more vivid or
subtle.
Picture
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker
or brighter picture overall.
Bright
You can adjust the overall brightness of the TV picture with the Bright control.
Detail
The Detail feature adjusts the level of fine detail displayed in the picture.
Adjust the Picture Settings
Press the MENU button
Picture Adjust
1/2
Standard
Video Status
π†
è
π†
√ ®
To "Picture Adjust"
To enter
To "Tint", "Color", "Picture", "Bright" or "Detail"
To enter
Tint
0
0
0
0
0
Color
Picture
Bright
Detail
Color Temperature
Low
Tint
0
BACK
MENU
OK
Select
Operate
Back
Exit
√ ®
π†
To adjust the setting
To move to the next setting
Press the MENU button when finished
Color Temperature
You can decide how strong or dull the colors appear on the TV screen.
Press the MENU button
Color Temp.
π†
è
π†
è
π†
To "Picture Adjust"
To enter
To "Color Temperature"
To enter
Low
High
To set "Low" or "High"
Press the MENU button when finished
Note:
• If you are receiving a 1080i or 720p digital channel in it's original format, you can adjust the
Picture Settings and Color Temperature independently from all the other channels.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust
Noise Reduction
With Noise Reduction, this helps take our static or noise from a channel that may not be
coming in clearly.
Press the MENU button
Noise Reduction
π†
è
π†
è
π†
To "Picture Adjust"
To enter
To "Noise Reduction"
To enter
Off
Low
High
To select the mode “Low”, “High” or “Off”
Press the MENU button when finished
(VSM) Velocity Scan Modulation
Velocity scan modulation circuitry varies the electron beam’s horizontal scanning speed to help
accentuate the differences in picture brightness to sharpen the edges of images.
Press the MENU button
VSM
π†
è
π†
è
π†
To "Picture Adjust"
To enter
To "VSM"
To enter
To turn VSM ON or OFF
On
Off
Press the MENU button when finished
Natural Cinema
Natural cinema corrects the problem of blurred edges which may occur when viewing a program
originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges
of these programs, choose "Natural Cinema" and set it to "On". Natural Cinema helps correct
conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the
television rate of 30 frames-per-second.
Press the MENU button
Natural Cinema
π†
è
π†
è
π†
To "Picture Adjust"
To enter
To "Natural Cinema"
To enter
On
Off
To select the mode "On" or "Off”
Press the MENU button when finished
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust
Position Adjustment
Position adjustment allows you to adjust the position of the picture on the screen vertically
when the aspect is set to panorama, cinema, or full.
Press the MENU button
π†
è
π†
è
π†
To "Picture Adjust"
To enter
To Position Adjustment
To enter
To adjust the position
Press the MENU button to finish
OK
BACK
MENU
Operate
Reset
Back
Exit
Notes:
• To reset the adjustment to the center, press the OK button.
• When the arrow disappears, while you are adjusting the position, the position is at it’s
maximum limit.
• If you select regular size with aspect, position adjustment option is not seen.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position vertically when the aspect is set
Panorama Zoom or Cinema Zoom for 1080i and 720p signals.
Reset
Reset resets all picture adjustments at once to the default settings.
Press the MENU button
Picture Adjust
2/2
π†
è
π†
To "Picture Adjust"
To enter
To "Reset"
Video Status
Standard
Off
Noise Reduction
VSM
On
On
Natural Cinema
Position Adjustment
Reset
Press the OK button
The onscreen menu disappears for a moment,
and then the settings are reset to the default
setting for all the picture adjustments.
OK
BACK
MENU
Select
Operate
Back
Exit
Press the MENU button when finished
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjust
Sound Settings
These settings allow you to change and adjust the sound on your television.
Bass – You can increase or decrease the level of low-frequency sound in the TV’s audio with
the bass adjustment.
Treble – Use treble to adjust the level of high-frequency sound in your TV’s audio.
Balance – Adjust the level of sound between the TV’s left and right speakers with the balance
setting.
Adjust the Sound Settings
Press the MENU button
Sound Adjust
Bass
0
0
0
π†
è
π†
√ ®
π†
To "Sound Adjust"
To enter
To "Bass", "Treble" or "Balance"
To adjust the setting
To move to the next setting
Treble
Balance
Optical Out
Turn On Volume
Volume Limit
PCM
Current
20
Reset
MENU
BACK
Select
Operate
Back
Exit
Press the MENU button when finished
Notes:
• You can reset all sound adjustments you set at once as the default setting when you select
reset. See page 48.
Optical Out
You can select the optical digital sound output, either PCM or Dolby Digital when your TV
is connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you
can enjoy listening in 5.1ch sound when watching digital broadcasts. This only effects digital
channels.
Sound Adjust
Bass
0
0
0
Press the MENU button
Treble
Balance
π†
è
To "Sound Adjust"
To enter
Optical Out
Turn On Volume
Volume Limit
PCM
Current
20
π†
To "Optical Out"
Reset
BACK
MENU
è
To select "PCM" or "DOLBY DIGITAL"
Press the MENU button when finished
Select
Operate
Back
Exit
Notes:
• If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it
cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 16.
Manufactured under license from Dolby Laboratories. "Dolby", and
the double-D symbol are trademarks of Dolby Laboratories.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjust
Turn On Volume
Turn On Volume allows you to set the volume level when you turn the TV on.
Press the MENU button
Sound Adjust
Bass
0
0
0
π†
è
π†
è
To "Sound Adjust"
To enter
To "Turn On Volume"
To set the volume level
Treble
Balance
Optical Out
Turn On Volume
Volume Limit
PCM
Current
20
Current
0
1
2
3
48
49
50
Reset
MENU
BACK
Select
Operate
Back
Exit
Press the MENU button to finish
Volume Limit
Volume Limit allows you to set the maximum volume level.
Press the MENU button
Sound Adjust
Bass
0
0
0
π†
è
π†
è
To "Sound Adjust"
To enter
To "Volume Limit"
To set the maximum volume level
Treble
Balance
Optical Out
Turn On Volume
Volume Limit
PCM
Current
20
0
1
2
3
48
49
50
Reset
MENU
BACK
Select
Operate
Back
Exit
Press the MENU button to finish
Reset
Reset resets all Sound Adjustments at once to the default settings. See page 48 on how to use
reset.
Sound Adjust
Bass
0
0
0
Treble
Balance
Optical Out
Turn On Volume
Volume Limit
PCM
Current
20
Reset
MENU
OK
BACK
Select
Operate
Back
Exit
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timers
Set Clock
The set clock function is described on page 21 as the interactive plug-in menu. You can
choose to set the clock automatically, or manually. If you need to set the clock again, follow the
steps below.
Press the MENU button
π†
è
π†
è
To "Clock/Timers"
To enter
To "Set Clock"
To operate
When you set the clock automatically, choose "Auto" by pressing the
√
or
®
arrows.
π†
è
To Time Zone
To select your time zone
Clock/Timers > Set Clock
Mode
Auto
Time
--
:
-- --
Time Zone
D.S.T.
Atlantic
On
Atlantic
Eastern
Central
Mountain
Hawaii
Alaska
Pacific
Start Clock
MENU
BACK
π†
è
†
To D.S.T. (daylight savings time)
To turn D.S.T. On or Off
To "Start Clock"
Select
Operate
Back
Exit
Press the OK button
Press the MENU button when finished
When you set the clock manually, choose "Manual" by pressing the
√
or
®
arrows.
π†
è
π†
è
π†
è
To move to the hour
To set the hour
To move to minutes
To set the minutes
To Time Zone
Clock/Timers > Set Clock
Mode
Manual
Time
10
:
30 AM
Time Zone
D.S.T.
Atlantic
On
Start Clock
MENU
To select your time zone:
BACK
Select
Operate
Back
Exit
(Atlantic, Eastern, Central, Mountain, Pacific, Alaska or
Hawaii)
π†
è
†
To D.S.T. (daylight savings time)
To turn D.S.T. On or Off
To "Start Clock"
Press the OK button
"Thank you !" will be displayed.
Press the MENU button when finished
Notes:
• D.S.T. can be used only for US and Canada when it is set to "On" in the "Set Clock" menu.
• Only when the "Mode" set to "Auto", the Daylight Savings Time feature automatically adjusts
your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on
the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in
October.
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timers
On/Off Timer
The on/off timer lets you program your television to turn itself on or off. You can use it as an
alarm to wake up, to help you remember important programs, or as a decoy when you’re not
home.
Clock/Timers > On / Off Timer
Press the MENU button
On Time
10
11
:
:
30 AM
30 AM
3
Off Time
Channel
π†
è
π†
è
è
†
To "Clock/Timers"
On Volume
Mode
Current
Once
To enter
On / Off Timer
Yes
To "On/Off Timer"
Set
BACK
MENU
Select
Operate
Back
Exit
To operate (begins with "On Time")
To set the hour (AM/PM) you want the TV to turn on
To move to minutes
è
†
To set the minutes
To accept "On Time" and move to "Off Time" (the time the TV will turn off). Set the
"Off Time" the same way as "On Time"
†
è
†
To accept "Off Time" and move to "Channel"
To select channel
To "On Volume"
è
†
To set the volume level
To move to "Mode"
è
Choose "Once" or "Everyday"
†
è
†
To "On/Off Timer"
Choose "Yes" to accept the timer setting, choose "No" if you don’t wish to accept
To "Set"
Press the OK button
Press the MENU button to exit the menu
Notes:
• The on/off time cannot be set to locked or guarded channels.
• In order for the on/off timer to work, the clock must be set.
• After a power interruption, the timer settings must be reset.
• If your clock is not set, "Please set clock first !" will appear on the screen. Please see
Manual Set Clock on page 51 to set the clock.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Power
Turns the TV on or off.
Press the POWER button
Number Buttons - 10Key Pad
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
0 (ZERO)
1 (ONE)
2 (TWO)
Tune
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the TUNE button. For example, to move to channel 12:
1 (ONE)
2 (TWO)
Press the TUNE button
Input
Selects the signal input source for the television: Video-1, 2, 3, 4, Digital-In1 or Digital-In2 for
video devices like VCR’s DVD players, or camcorders.
Press the INPUT button
By every press of the INPUT button, you can change the input mode.
Notes:
• When you return to TV mode, press the RETURN+/TV button or direct 10 key pad.
• You can also access the "Front Menu" screen by using the MENU button on the side of the TV
instead of the remote control. It has "Input", "Video Status" and "Aspect" menus. Choose
"Input" by pressing Menu
†
on the side panel and choose a mode by using the CHANNEL+/-
buttons ( OPERATE ).
√
®
Channel +/–
Use these buttons to move up or down all the available channels your TV is able to receive,
and navigate in the menus.
Volume +/–
Use these buttons to raise or lower the TV’s volume level, and navigate in the menus.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Return +/TV
The Return+/TV button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels using the CH+ and CH– buttons.
RETURN+/TV and hold for three seconds
Return Channel (123-456)
Programmed !
The channel currently active has been programmed as your return+ channel. Now scan
through the channels using the CHANNEL+/- buttons.
RETURN+/TV
You will return to your programmed channel.
• To cancel your return+ channel, press and hold the RETURN+/TV button for three seconds.
The message “Return Channel Cancelled !” will appear.
• Return+ works only with the CHANNEL+/- buttons. Pressing any number key will cancel
return+.
Sound
By pressing the SOUND button, you can change the A.H.S. (Advanced Hyper Surround), BBE
and SMART SOUND on or off.
A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more
effect.
BBE - BBE High Definition Sound restores clarity and presence for better speech intelligibility
and musical realism.
Smart Sound - Decreases high sound levels, giving a regulated sound level.
Press the SOUND button
Sound Effect
A.H.S
Off
Off
On
π†
è
To select "A.H.S.", "BBE" or "Smart Sound"
To choose the setting
BBE
Smart Sound
Press the MENU when finished
OK
MENU
Select
Operate
Exit
Note:
• BBE is for AV-30W777 ONLY.
Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under
one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are
registered trademarks of BBE Sound, Inc.
Muting
The MUTING button instantly turns the volume down completely when you press it. Press
MUTING and the volume level will instantly go to zero. To restore the volume to its previous
level, press MUTING again.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Video Status
The Video Status button gives you a choice of four TV picture display settings, including a
display of your own preferences.
Standard - Resets the picture display to the factory settings.
Video Status
Dynamic - Gives a vivid picture with better contrast when viewing in
Standard
a brightly lit room.
Dynamic
Theater - Gives a rich, film-like look to video when viewing in a
Theater
Game
dimly lit room.
Game - Used for when you are playing video games connected to
your TV.
Press the VIDEO STATUS button
By every press of the VIDEO STATUS button, you change the mode.
Note:
• You can also change the mode by pressing the π† buttons.
• You can also access the "Front Menu" screen by using the MENU button on the side of
the TV instead of the remote control. It has "Input", "Video Status" and "Aspect" menus.
Choose "Video Status" by pressing Menu
†
).
on the side panel and choose a mode by using
the CHANNEL+/- buttons (
√
OPERATE
®
TheaterPro D6500K
The TheaterPro D6500K color temperature technology function makes sure that the video you
watch is set to the standard color temperature, so that what you see is as true to what the film
to video editors intended it to be.
Press the THEATER PRO button
Sleep Timer
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work for a total
time of up to 180 minutes. When you press the SLEEP TIMER button once, the rest of the time
will be displayed.
Sleep Timer
0 min.
Press the SLEEP TIMER button twice
15 min.
By every press of the SLEEP TIMER button, you select the time for
the timer to shut off
30 min.
45 min.
60 min.
90 min.
120 min.
180 min.
60 seconds before the automatic shut off, this message will
appear:
Good Night !
Push [SLEEP TIMER] button
to extend.
You then have 60 seconds to press the SLEEP TIMER button to delay the shut off.
Note:
• You can also select the timer by pressing the π† buttons.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Display
The display screen shows the current information as follows.
Press the DISPLAY button
Detailed mode
Clock Mode
Simple Mode
Off
• Detailed Mode - Shows the channel, channel name, signal, rating information, current time,
digital antenna level and scramble information, as well as the current time below.
(
(
o
))
(
(
S
))
Dolby Digital
TV PG
D L
S
V
NR
108-1
HD1080i CC
WEWEWEW
11:00PM - 11:30PM Football fun meeting
10:15PM
• Clock Mode - Shows the current time.
108-1
• Simple Mode - Shows the current channel and channel name or AV input.
• Off - Turns the display off.
WEWEWEW
Notes:
• You may also turn off the display at any step by pressing MENU.
• If the clock is not set, "Clock Not Set" will be displayed.
• A signal being shown in Detailed Mode, will only show the kind of input and video signal you
are receiving. However, the actual signal type you see will be different. This TV converts all
signals to the 1080i format.
C.C. (Closed Caption)
Use the C.C. (Closed Caption) button to select the mode of closed caption.
Press the C.C. button
Closed Caption
On
Notes:
Smart Caption
• Smart Caption will appear when you press the Muting button,
only on channels where the broadcast contains closed
Off
captioning.
• When you select "On", it will be the mode selected in the Closed Caption Menu.
• See page 38 when you set the caption/text mode.
• You can also change the mode by pressing the π† buttons.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Aspect
This feature will help you adjust the picture you are watching to give you the best possible
picture quality.
Aspect Ratios
PANORAMA - With this ratio a normal
4:3 aspect picture is stretched to fit the
dimensions of the 16:9 aspect screen.
REGULAR - The regular ratio is used
when you want to watch a 4:3 broadcast
or recorded program without modifying the
original picture to fit the dimensions of your
16:9 screen. The 4:3 picture will fill the
screen from top to bottom, while black bars
will appear to fill up the remaining space
along the picture’s sides. The 4:3 picture
will be centered within the boundaries of the
16:9 screen.
CINEMA - This ratio “zooms in” on the
center part of a 4:3 aspect picture, blowing
it up to fill the 16:9 screen.
SLIM - This aspect mode shrinks the
screen of 16:9 to 4:3. There are some
programming that is already stretched by
mistake at broadcasting companies, so
this mode corrects it. Black side bars will
appear.
FULL - This is the ratio to use when
watching 16:9 High-Definition broadcasts.
PANORAMA ZOOM - This ratio stretches
the High-Definition 16:9 aspect image to
eliminate the black side bars.
CINEMA ZOOM - This ratio stretches
the High-Definition 16:9 aspect image to
eliminate the black surrounding bars.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Aspect Ratios (Continued)
Press the ASPECT button
• By pressing the ASPECT button, you can change the size.
When you change the aspect ratios, it is different from their broadcast or recorded program.
Receiving 16:9
signal
Receiving 4:3
signal
Aspect
Aspect
Panorama
Cinema
Full
Panorama Zoom
Cinema Zoom
Full
Regular
Slim
Notes:
• You can also choose the size by pressing the π† buttons.
• When you change the aspect ratio or signal, reset the picture position to center.
• You can also access the "Front Menu" screen by using the MENU button on the side of the TV
instead of the remote control. It has "Input", "Video Status" and "Aspect" menus. Choose
"Aspect" by pressing MENU
+/- buttons ( OPERATE
†
®
on the side panel and choose a mode by using the CHANNEL
).
√
• If the televison receives a 16:9 signal from your HDMI device, the aspect mode will turn to
"Full" automatically. If the television receives a 4:3 signal from your HDMI device when you
are in "Full" aspect mode, it will return to "Regular" aspect mode. If you change the aspect
mode after the televison changed it to "Full" automatically, the televison will change to the
aspect mode you choosed.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Favorite
The Favorite button allows you to select your favorite channels easily. First, you must register
the channels that you like. See how to register below.
Press the FAVORITE button
Favorite
CBSXXXX
The favorite channel list will appear.
101
π†
To select the channel you want to watch
102
FOXXXX
Press the OK button
103-1
PBSXXXX
It will change to the channel you have selected.
123-456 WEWEWEW
107-2
HBOXXXX
ABCABC
NHKNHK
MBSMBS
8
1
4
Register the favorite channel
Press the channel number you want to register
The channel program will change.
Remove
Press the FAVORITE button for three seconds
The channel will be registered in the favorite channel list.
Notes:
• The maximum number of channels you can register is 24.
• If you have registered the maximum number of channels, and try to register more channels,
the oldest channel you registered will be deleted.
Delete the favorite channel
Press the FAVORITE button
Favorite
The favorite channel list will appear.
101
CBSXXXX
FOXXXX
102
π†
è
To select the channel you want to delete
To enter
103-1
PBSXXXX
Do you really remove ch 101
from this list ?
123-456 WEWEWEW
107-2
HBOXXXX
ABCABC
NHKNHK
MBSMBS
The screen to the right will appear.
8
1
4
è
To "Yes"
Press the OK button
The channel was deleted.
Yes
No
Remove
Press the FAVORITE button when finished
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
ML/MTS
ML/MTS technology allows several audio signals to be broadcast in analog at once, giving you
a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an
MTS broadcast may also include a second audio program (SAP). When you are receiving a
digital broadcast, it is possible to choose a language that you wish to receive.
When receiving ANALOG broadcast
Press the ML/MTS button
MTS
By every press of the ML/MTS button, you change the mode
Stereo
SAP
Mono
Notes:
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
• MTS unavailable if your television’s Input source is in Video-1, 2, 3, 4, Digital-In1, or
Digital-In2 mode, as described on page 53.
• You can also change the mode by pressing the π† buttons.
When receiving DIGITAL broadcast
Press the ML/MTS button
Multi Language
By every press of the ML/MTS button, you change the
language
English
Spanish
Menu
The Menu button allows you to access JVC’s onscreen menu system. Press MENU to activate
the onscreen menu system. When a menu is displayed, press the MENU button to exit the
menu system.
• See individual topics like “Sound Adjust” for specific information on using menus.
OK
This button confirms your selection when you are in one of the onscreen menus.
Back
This button allows you to go back in the menu to change a selection or correct a mistake.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Sub Channel
The main channel sometimes has minor channels (Sub Channels). By using the SUB button,
you can select a sub channel easily.
For example, to move to sub channel 123-45:
Press 1, 2 and 3 in order
Press the SUB CH button
Press 4 and 5 in order
Press the TUNE button
Note:
• If there are more than 2 major channels, select the digital channel by using the π† buttons
and then press the OK button.
Guide
You can view the program information from the GUIDE.
Notes:
• The GUIDE will not show the correct time and date if you have not performed the set clock
function on your television. See page 51.
• When the program information is not being broadcasted, it will not show the correct
information.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
TV/CATV Slide Switch
Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to
operate the television’s built-in tuner. Move the switch to CATV to operate a cable box.
Note:
• See page 23 for information on programming your remote for cable box operation.
VCR/DVD Slide Switch
You can control a VCR or DVD player with the buttons on the lower part of the remote control.
Move the slide switch to VCR or DVD to operate.
Notes:
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other
manufacturer’s brand VCR, please see the code chart and instructions on page 24.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 25.
VCR Buttons
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and
power off.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other
manufacturer’s brand VCR, please see the code chart and instructions on page 24.
DVD Buttons
You can also use this remote control to operate the basic functions of your DVD player. These
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,
power on, and power off.
Move the selector switch to DVD to operate.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 25.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
PROBLEMS
CHECK
There is no power
• See if the power cord became unplugged.
• Check for a blown fuse or circuit breaker or a power outage.
• The antenna could be disconnected.
There is no picture
or sound
• The input mode could be set improperly. See page 53.
• The tuner (Auto Tuner Setup) could be set improperly. See page 41.
• The TV station may be having difficulties. Check to see if other stations are working.
• Use the HDMI cable with HDMI logo
. See page 18.
• You can not output audio using the OPTICAL OUTPUT when you have digital sound from
an HDMI device connected the the HDMI 1 or HDMI 2 connection on the back of your TV.
(See page 18).
Remote control is not • Check to see that the batteries are still working and properly installed.
operating properly or • Make sure the remote has a clear sight path to the TV.
at all
• Check that the TV/CATV switch is in the proper position.
• You may be too far from the TV. You must be within 23 feet (7 meters).
You cannot select a
certain channel
• Make sure the channels have been programmed. See "Channel Summary", page 41.
• Check to see if the channel is locked. See "Channel Summary - Lock" page 42.
The power turns off
by itself
• Make sure the set did not become unplugged.
• Perhaps the On/Off Timer is set. See page 52.
• Check to see if the Sleep Timer was set. See page 55.
The clock is wrong
• The power was interrupted and the clock was not reset. See page 51.
The color quality
is poor
• Tint and Color may be improperly adjusted. See page 46.
• The Video Status mode may be turned to the wrong setting. See page 55.
There are lines
across the picture
• There could be interference from another electrical appliance, such as a computer,
another TV or VCR. Move any such appliances further away from the TV.
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference.
The picture is spotted
There are double
pictures (ghosts)
• A building or passing airplane can reflect the original signal and produce a second,
slightly delayed one. Adjust your antenna position.
Picture is snowy
(image noise)
• Your antenna may be damaged, disconnected or turned. Check the antenna
connection. If the antenna is damaged, replace it.
Screen is 40% black
• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 38.
• Make sure the MTS settings are correct. See page 60.
Stereo or bilingual
programs can't be
heard
Static electricity
• It is normal to feel static electricity if you brush or touch the screen.
You hear occasional
crackling sounds
• It is normal for the TV to make crackling sounds when first turned on or off. Unless
the sound or picture become abnormal, this is fine.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Information
Weak Signal
This OSD warning appears when the digital channel that you have selected is too weak to
receive or no signal is being detected for that channel.
No Program or Weak Signal
Audio / Data Only Channel
This OSD appears when the selected channel is not broadcasting any picture or sound, or is
only broadcasting data information.
Audio / Data Only Channel
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
AV-30W777
AV-30W767
MODEL
Reception
Format
NTSC, BTSC System (Multi-Channel Sound)
ATSC Terrestrial, Digital Cable
VHF 2 to 13, UHF 14 to 69 at ATSC,
CATV 135 Sub, Mid, Super, Hyper and Ultra bands at Digital Cable
Reception
Range
VHF 2 to 13, UHF 14 to 69 CATV 135 Sub, Mid, Super, Hyper
and Ultra bands (191 channel frequency synthesizer system) at Analog
•
Reception of channel A-5 ("95" of the TV set's on-screen cable channel
numbers) is not recommended for your TV set.
AC 120V, 60Hz
Power Source
Power
Consumption
200W
30 inch / 95 cm
measured diagonally
full square
Screen Size
Audio Output
Speakers
10W + 10W
2 1/2 x 5 inch / 6.5 x 13 cm oval x 2
75 ohms (VHF/UHF) (F-type connector)
Antenna
Terminal
Video: 1 Vp-p, 75 ohms
Audio: 500mVrms (-4dBvfs) high impediance
External Input
Jacks
Y: 1Vp-p positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
S-Video Input
Jack
Component
Input Jacks
Y: 1Vp-p positive, 75 ohms (negative sync provided)
PB/PR: 0.7 Vp-p, 75 ohms
Audio Output
Jacks (FIX)
FIX: 500 mVrms (-4dBvfs) Low impedance (400 Hz when modulated 100%)
Digital Out (optical) x 1
Optical Output
Digital Audio
HDMI jack x 2
Digital–In
Note: The Digital–In terminal is not compatible with picture signals of a
personal computer
Dimensions (In)
WxHxD (cm)
33 1/4 x 23 5/8 x 21 7/8
84.2 x 59.9 x 55.4
Weight (lbs / kg)
Accessories
115 / 52
Remote control unit x 1, AA batteries x 2
Specifications subject to change without notice.
Notes:
• Reception of channel A-5 ("95" of the TV set's on-screen cable channel numbers) is not
recommended for your TV set.
• The open source software is embedded in this product. For more information, please go to:
65
Download from Www.Somanuals.com. All Manuals Search And Download.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
71
Download from Www.Somanuals.com. All Manuals Search And Download.
JVC COMPANY OF AMERICA
Division of JVC Americas Corp.
1700 Valley Road
JVC CANADA, INC.
21 Finchdene Square
Scarborough, Ontario
Canada, M1X 1A7
Wayne, New Jersey, 07470
Download from Www.Somanuals.com. All Manuals Search And Download.
|