Color Television Users Guide
For Models:
AV-20F476
AV-27F476
AV-32F476
Illustration of AV-32F476 and RM-C1258G
Important Note:
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this
guide. Keep this user's guide in a convenient place for future reference. Keep the carton and
original packaging for future use.
Model Number:
LCT1785-001A-A
Serial Number:
1204JGI-II-IM
Download from Www.Somanuals.com. All Manuals Search And Download.
• As an “ENERGY STAR®” partner, JVC has determined
that this product or product model meets the “ENERGY
STAR®” guidelines for energy efficiency.
Important Safeguards
CAUTION:
Please read and retain for your safety.
Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to
assure your personal safety. But improper use can result in potential electrical shock or fire hazards.
In order not to defeat the safeguards incorporated in this TV set, observe the following basic rules for its
installation, use and servicing. Also follow all warnings and instructions marked on your TV set.
INSTALLATION
1 Your TV set is equipped with a polarized AC line plug (one blade of the
plug is wider than the other). This safety feature allows the plug to fit
into the power outlet only one way. Should you be unable to insert the
plug fully into the outlet, try reversing the plug. Should it still fail to fit,
contact your electrician.
(POLARIZED-TYPE)
2 Operate the TV set only from a power source as indicated on the TV set or refer to the operating
instructions for this information. If you are not sure of the type of power supply to your home, consult your
TV set dealer or local power company. For battery operation, refer to the operating instructions.
3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords and broken
plugs. They may result in a shock or fire hazard. Call your service technician for replacement.
4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set where power cord
is subject to traffic or abuse. This may result in a shock or fire hazard.
5 Do not use this TV set near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a
wet basement, or near swimming pool, etc.
6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built-up static charges. Section 810 of the National Electrical
Code provides information with respect to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge
unit, connection requirements for the grounding electrode.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ANTENNA
LEAD IN
WIRE
7 An outside antenna system
should not be located in the
vicinity of overhead power
lines or other electric light
or power circuits, or where it
can fall into such power lines
or circuits. When installing
an outside antenna system,
extreme care should be taken
to keep from touching such
power lines or circuits as
contact with them might be
fatal.
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRICAL
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ARTICLE 250, PART H)
NEC - NATIONAL ELECTRIC CODE
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE
8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during operation to be
released.
Therefore:
— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa, rug, etc.
— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.
— Never cover the openings with a cloth or other material.
— Never place the TV set near or over a radiator or heat register.
9 To avoid personal injury:
— Do not place a TV set on a sloping shelf unless properly secured.
— Use only a cart or stand recommended by the TV set manufacturer.
— Do not try to roll a cart with small casters across thresholds or deep pile carpets.
— Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit
approved by the manufacturer.
Use
10 Caution children about dropping or pushing objects into the TV set through cabinet openings. Some
internal parts carry hazardous voltages and contact can result in a fire or electrical shock.
11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol cleaner.
12 Never add accessories to a TV set that has not been designed for this purpose. Such additions may result
in a hazard.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PORTABLE CART WARNING (Symbol provided by RETAC)
13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for
an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent
damage to product due to lightning storms or power line surges.
14 A TV set and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the TV set and cart combination to overturn.
Service
15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normally by following the operating instructions. Adjust only those
controls that are covered in the operating instructions as improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the TV set to
normal operation.
E. If the TV set has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in performance — this indicates a need for service.
16 Do not attempt to service this TV set yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
17 When replacement parts are required, have the service technician verify in writing that the replacement
parts he uses have the same safety characteristics as the original parts. Use of manufacturer’s specified
replacement parts can prevent fire, shock, or other hazards.
18 Upon completion of any service or repairs to this TV set, please ask the service technician to perform the
safety check described in the manufacturer’s service literature.
19 When a TV set reaches the end of its useful life, improper disposal could result in a picture tube
implosion. Ask a qualified service technician to dispose of the TV set.
20 Note to CATV system installer.
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Clock Timers . . . . . . . . . . 38
Quick Setup . . . . . . . . . . . 7
Unpacking your TV . . . . . . . . . . . . 7
TV Models . . . . . . . . . . . . . . . . 8
TV Remote Control . . . . . . . . . . . 9
Getting Started . . . . . . . . . . . . . 10
The Remote Control . . . . . . . . . . 10
Connecting Your Devices . . . . . . . 11
Interactive Plug In Menu . . . . . . . . 15
Set Clock . . . . . . . . . . . . . . . . 38
On/Off Timer . . . . . . . . . . . . . . . 39
World Clock . . . . . . . . . . . . . . 40
Button Functions . . . . . . . 41
Power . . . . . . . . . . . . . . . . . . 41
Number Buttons . . . . . . . . . . . . . 41
100+ Button . . . . . . . . . . . . . . . 41
Channel +/– . . . . . . . . . . . . . . . 41
Volume +/– . . . . . . . . . . . . . . . 41
Muting . . . . . . . . . . . . . . . . . . 41
Menu . . . . . . . . . . . . . . . . . . 41
Exit . . . . . . . . . . . . . . . . . . . 41
Return + . . . . . . . . . . . . . . . . . 42
Input . . . . . . . . . . . . . . . . . . . 42
Display . . . . . . . . . . . . . . . . . 43
Sleep Timer . . . . . . . . . . . . . . . 43
Sound . . . . . . . . . . . . . . . . . . 44
C.C. . . . . . . . . . . . . . . . . . . . 44
Video Status . . . . . . . . . . . . . . . 45
TheaterPro D6500K . . . . . . . . . . . 45
Aspect . . . . . . . . . . . . . . . . 45
TV/CATV Slide Switch . . . . . . . . . . 46
VCR/DVD Slide Switch . . . . . . . . . 46
VCR Buttons . . . . . . . . . . . . . . . 46
DVD Buttons . . . . . . . . . . . . . . . 46
Remote Programming . . . . . 18
Setting CATV, VCR and DVD Codes . . . 18
CATV or Satellite Codes . . . . . . . . 18
VCR Codes . . . . . . . . . . . . . . 19
DVD Codes . . . . . . . . . . . . . . 20
Search Codes . . . . . . . . . . . . . 21
Onscreen Menus . . . . . . . . 22
Using the Guide . . . . . . . . . . . . . 22
Onscreen Menu System . . . . . . . . . 23
Initial Setup . . . . . . . . . . 24
Auto Tuner Setup . . . . . . . . . . . . 24
Channel Summary . . . . . . . . . . . . 24
V-Chip . . . . . . . . . . . . . . . . . . 25
Set Lock Code . . . . . . . . . . . . . 31
Language . . . . . . . . . . . . . . . . 32
Closed Caption . . . . . . . . . . . . . 32
Front Panel Lock . . . . . . . . . . . . 33
Auto Shut Off . . . . . . . . . . . . . . 33
XDS ID . . . . . . . . . . . . . . . . . 33
Video Input Label . . . . . . . . . . 34
Appendices . . . . . . . . . . 47
Troubleshooting . . . . . . . . . . . . . 47
Specifications . . . . . . . . . . . . . . 48
Warranty . . . . . . . . . . . . . . . . . 50
Authorized Service Centers . . . . . . . 51
Picture Adjust . . . . . . . . . 35
Picture Settings . . . . . . . . . . . . . 35
Adjust Picture Settings . . . . . . . . . 35
Color Temperature . . . . . . . . . . . . 36
Noise Muting . . . . . . . . . . . . . . 36
VSM . . . . . . . . . . . . . . . . . 36
Sound Adjust . . . . . . . . . 37
Sound Settings . . . . . . . . . . . . . 37
Adjust Sound Settings . . . . . . . . . 37
MTS (Multi-channel Sound) . . . . . . . 37
Smart Sound . . . . . . . . . . . . 37
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Unpacking Your TV
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new
television, please check to make sure you have all of the following items. In addition to this
guide, your television box should include:
Two AA
Batteries
1 Remote Control
1 Television
TV CATV VCR DVD
POWER
INPUT
DISPLAY
1
2
3
6
SLEEP TIMER
4
5
SOUND
7
8
0
9
RETURN+
VIDEO STATUS 100+
THEATER PRO ASPECT
MUTING
C.C.
CH
CH
+
Note: Your television
and/or remote
VOL
–
VOL
+
–
MENU
EXIT
VCR CHANNEL VCR/DVD
TV/VCR
PREV NEXT
POWER
control may differ
from the examples
illustrated here.
REW
REC
PLAY
FF
STOP
PAUSE
OPEN/CLOSE
STILL/PAUSE
O
N
T
I
M
E
R
RM-C1258G
POWER
TV
Once you have unpacked your television, the next step is to connect it to your antenna/
cable or satellite system and to connect the audio/video devices you want to use with your
television. To make these connections you will use plugs like the ones illustrated below.
Coaxial Cables
Component Cables
Composite Cables
Audio Cables
Used to connect an
external antenna or
cable TV system to your
TV.
Used to connect audio/
video devices like
VCRs, DVD players,
stereo amplifiers, game
consoles, etc.
S-Video Cable
Used to make video
connections with S-Video
VCRs, Camcorders and
DVD players.
We recommend that before you start using your new television, you read your entire User’s
Guide so you can learn about your new television’s many great features. If you’re anxious to
start using your television right away, a quick setup guide follows on the next few pages.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
TV Models
NOTE: Before you connect your television to another device, please refer to the proper
diagrams for your specific TV and remote. These will help assist you in understanding
how to connect your television to another device, as well as use the remote to set up
your television.
Rear Panel Diagrams
MODELS:
AUDIO
L MONO
VIDEO
S
VIDEO
R
OVER
AV-32F476
AV-27F476
INPUT
INPUT
1
2
COMPONENT
VIDEO
75Ω
(VHF / UHF)
Video/Y
R
L
PB
PR
AUDIO OUT
MODEL:
INPUT 1
INPUT 2
AV-20F476
COMPONENT
VIDEO
S-VIDEO
OVER
75Ω
(VHF/UHF)
VIDEO
VIDEO/Y
AUDIO OUT
AUDIO
L/MONO L/MONO
PB
PR
L
R
R
R
Front Panel Diagrams
INPUT
3
CHANNEL
VOLUME
MENU
OPERATE
VIDEO
L
MONO
AUDIO
R
MODELS: AV-32F476, AV-27F476
INPUT
3
MENU
CHANNEL
OPERATE
VOLUME
VIDEO
L
MONO AUDIO
R
MODEL: AV-20F476
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
TV Remote Control
POWER
TV CATV VCR DVD
INPUT
DISPLAY
1
2
5
3
6
SLEEP TIMER
4
SOUND
7
8
0
9
RETURN+
100+
VIDEO STATUS
THEATER PRO
ASPECT
MUTING
C.C.
CH +
VOL
+
VOL
–
CH –
MENU
EXIT
VCR/DVD
POWER
VCR CHANNEL
PREV NEXT
TV/VCR
REW
REC
PLAY
FF
STOP
PAUSE
OPEN/CLOSE
STILL/PAUSE
RM-C1258G
TV
RM-C1258G
MODELS:
AV-20F476
AV-27F476
AV-32F476
• For information on remote control buttons, see pages 41 - 46.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Getting Started
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away.
If you have questions, or for more detailed information on any of these steps, please consult
other sections of this manual.
Step 1 – The Remote Control
Before you can operate your remote control, you first need to install the batteries (included).
Lift and pull the latch on the back of the
remote control to open. Insert two batteries
(included) carefully noting the “+” and “–”
markings, placing the “–” end in the unit first.
Snap the cover back into place.
When you change the batteries, try to
complete the task within three minutes.
If you take longer than three minutes,
the remote control codes for your VCR,
DVD, and/or cable box/satellite receiver
may have to be reset. See pages 18 - 20.
Key Feature Buttons
MUTING
The four key feature buttons at the center of the remote
can be used for basic operation of the television.
The top and bottom buttons will scan forward and
back through the available channels. To move rapidly
through the channels using JVC’s Hyperscan feature,
press and hold CH+ or CH–. The channels will zip by
at a rate of five channels per second. The right and left
buttons will turn the volume up or down. These buttons
are also marked with four arrows and are used with
JVC’s onscreen menu system. To use the onscreen
menus, press the MENU button.
C.C.
CH +
VOL
+
VOL
–
CH –
MENU
EXIT
Basic Operation
Turn the television on and off by pressing the POWER button at the top right
corner of the remote. If this is the first time you are turning on the TV, the
interactive plug-in menu appears.
POWER
• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if
you need to operate a cable box.
TV CATV V
• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to
DVD to control a DVD player. Please see pages 18 to 21 for instructions on
programming your remote control to operate a cable box, VCR or DVD player.
VCR DVD
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Step 2 – Connecting Your Devices
Please follow the flow chart below to determine which connection setup is right for you. Then,
refer to the appropriate diagrams to connect your television to other devices that you may
have. After you are finished connecting your devices, plug the power cord into the nearest
power outlet and turn on the TV.
A VCR is not necessary for operation of the television. If you follow these diagrams and the
television does not work properly, contact your local cable operator.
• To connect a DVD player, see Diagram #3. A DVD player is optional.
• If you have a satellite television system, please refer to the satellite TV manual.
Do you use a Cable TV Box?
Yes
No
Do you have a VCR?
Do you have a VCR?
Yes
No
Yes
No
Diagram #2 Diagram #1
Diagram #3 Diagram #1
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Diagram #1
Illustration of AV-32F476
TV Rear Panel
Cable or Antenna
Output
AUDIO
L MONO
VIDEO
S
VIDEO
R
OVER
INPUT
INPUT
1
2
COMPONENT
VIDEO
Coaxial Cable
75Ω
(VHF UHF)
/
Video/Y
R
L
OR
PB
PR
AUDIO OUT
OUT IN
Cable Box
Note:
• If you do not have a cable box, connect the cable wire from the wall outlet into the back of
the TV.
Diagram #2
Illustration of AV-32F476
Cable or Antenna
Output
TV Rear Panel
AUDIO
L MONO
VIDEO
S
VIDEO
R
OVER
INPUT
INPUT
1
2
COMPONENT
VIDEO
75Ω
/
(VHF
UHF)
Video/Y
R
L
PB
PR
AUDIO OUT
Coaxial Cable
OR
VCR
OUT
IN
OUT
R
L
V
IN
OUT
IN
Cable Box
Notes:
• If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the TV’s
LEFT AUDIO INPUT.
• Use the S-Video connection if possible for superior picture quality.
• Your VCR must be turned on to view premium cable channels.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Notes:
• Green, blue and red are the most common colors for DVD cables. Some models may vary
colors. Please consult the user’s manual for your DVD player for more information.
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete
one set of connections (DVD or audio output) before starting the other to avoid accidentally
switching the cables.
• If you use INPUT 2 (Component-In), for a DVD connection, you must select
"V2-COMPONENT" by pressing the INPUT button, for proper display of the DVD signal.
• Progressive DVD players (players with an output scan of 31.5 KHz) will not work properly with
this television. Set your DVD player’s output to “interlaced”, or non-progressive mode.
Diagram #3
Illustration of AV-32F476
Cable or Antenna
Output
VCR
R
L
V
IN
IN
DVD Player (OPTIONAL)
OUT
Coaxial Cable
OUT
Green
Blue
Y
P
P
AUDIO OUT
L
R
B
R
OR
Red
OU
UDIO
V
S
O
L MO
OVER
INPUT
INPUT
1
2
COMPONENT
VIDEO
75Ω
(VHF UHF)
/
Video/Y
R
L
PB
PR
AUDIO OUT
Headphone Connection
You can connect a pair of headphones to the television using the headphone jack located under
the front panel door. To access, push on the door to open it.
1) Plug a headphone jack into the headphone jack on the television’s front panel.
Note:
• AV-20F476 ONLY
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connections
Connecting to a Camcorder
You may connect a camcorder, game console or other equipment to your television by using
the front input jacks (Input 3) located under the front panel door. To access, pull on the door
to open it. You can also connect these using the television’s rear input jacks, using the same
instructions.
Illustration of AV-32F476
INPUT
3
CHANNEL
OPERATE
VOLUME
MENU
VIDE
MO
AU
R
Camcorder
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on
the front of the TV.
2) Connect a white composite cable from the camcorder LEFT AUDIO OUT, into the
LEFT AUDIO IN on the front of the TV.
3) Connect a red composite cable from the camcorder RIGHT AUDIO OUT, into the
RIGHT AUDIO IN on the front of the TV.
Note:
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the
LEFT AUDIO IN.
Connecting to an External Amplifier
Illustration of AV-32F476
R
L
Speaker
Speaker
Amplifier
AUDIO OUT
TV Rear Panel
1) Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the TV to
the LEFT AUDIO INPUT on the amplifier.
2) Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the TV to
the RIGHT AUDIO INPUT on the amplifier.
Notes:
• Refer to your amplifier’s manual for more information.
• You can use AUDIO OUTPUT for your home theater system.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Plug-In Menu
Step 3 – The Interactive Plug In Menu
When you turn your television on for the first time the interactive plug-in menu will appear. The
plug-in menu helps you to get your TV ready to use by letting you set your preferences for:
• The language in which you want the onscreen menus to appear.
• Setting the TV’s clock to the correct time so your timer functions will work properly. You can
choose “AUTO” or “MANUAL” for setting the clock.
• The auto tuner setup of which channels you wish to receive.
We recommend you complete the interactive plug-in items before you start using your
television.
Language
After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically
switches to the LANGUAGE settings. You can choose to view your onscreen menus in three
languages: English, French (Français) or Spanish (Español).
è
To choose a language:
(English, Français or Español)
I N T E R A C T I V E P L U G I N M E N U
L A N G U A G E / L A N G U E / I D I O M A
>
†
To NEXT (To set clock)
E N G L I S H
N E X T
S E L E C T
B Y
E X I T
O P E R A T E B Y
E X I T B Y
(To be continued...)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Plug-In Menu
Auto Clock Set
Before you use any of your TV’s timer functions, you must first set the clock. You may precisely
set your clock using the XDS time signal broadcast by most public broadcasting stations. If you
do not have this in your area, you will have to set the clock manually. See manual clock set
below. To set the clock using the XDS signal:
è
†
To choose AUTO
To TIME ZONE
I N T E R A C T I V E P L U G I N M E N U
S E T C L O C K
>
M O D E
A U T O
– – : – – – –
è
To select your time zone:
(Atlantic, Eastern, Central, Mountain, Pacific,
Alaska or Hawaii)
T I M E
T I M E Z O N E
D . S . T .
P A C I F I C
O F F
N E X T
S E L E C T
B Y
†
To move to D.S.T. (Daylight Savings Time)
To turn D.S.T. ON or OFF
E X I T
E X I T B Y
O P E R A T E B Y
è
†
To NEXT (To Auto Tuner Setup)
Notes:
• D.S.T. can be used only for US and Canada when it is set to ON in the SET CLOCK menu.
• Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts
your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on
the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in
October.
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
Manual Clock Set
To set your clock manually (without using the XDS signal), choose MANUAL. If you choose
AUTO, see auto clock set above.
è
†
To choose MANUAL
To TIME
I N T E R A C T I V E P L U G I N M E N U
S E T C L O C K
>
M O D E
M A N U A L
– – : – – – –
T I M E
è
†
To set the hour
To minute
T I M E Z O N E
D . S . T .
P A C I F I C
O F F
è
†
To set the minute
To START CLOCK
S T A R T C L O C K
B Y
S E L E C T
E X I T
E X I T B Y
O P E R A T E B Y
Note:
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
(To be continued...)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Plug-In Menu
Auto Tuner Setup
In auto tuner setup, the TV automatically scans through all available channels, memorizing the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.
è
To choose CABLE or AIR (or SKIP when you
skip Auto Tuner Setup)
I N T E R A C T I V E P L U G I N M E N U
A U T O T U N E R S E T U P
>
†
To START
T U N E R M O D E
C A B L E
NOW
PROGRAMMING !
S T A R T
S E L E C T
B Y
E X I T
O P E R A T E B Y
E X I T B Y
48
Programming will take
approximately 1 to 2
minutes.
When the setup is finished, THANK YOU!! SETUP IS NOW COMPLETE is displayed. Your
quick setup is now complete. You can now begin watching your television, or you can continue
on in this guide for more information on programming your remote control, or using the
JVC onscreen menu system to customize your television viewing experience.
Notes:
• Noise muting will not work during Auto Tuner Setup.
• Skip appears only for interactive plug-in menu.
• The interactive plug-in menu setting does not appear if your TV has been turned on before.
In this case, use the initial setup menu to perform these settings. See pages 32, 38 and 24.
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is
normal.
The Quick Setup is complete
STOP
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
Setting the CATV, VCR and DVD Codes
You can program your remote to operate your cable box, satellite receiver, VCR or DVD
player by using the instructions and codes listed below. If the equipment does not respond to
any of the codes listed below or to the code search function, use the remote control supplied
by the manufacturer.
Cable Box or Satellite Codes
The remote control is programmed with cable box and satellite codes for power on/off,
channel up/down, and 10 key operation.
1) Find the cable box or satellite brand from the list of codes shown below.
2) Slide the 2-way selector switch to “CATV”.
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10
key pad.
4) Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.
• If your cable or satellite box does not respond to the first code, try the others listed. If it does
not respond to any code, try the search codes function, on page 21.
Cable Box
ABC
CODES
024
Cable Box
Puser
CODES
032
Digital
Satellite
Systems
CODES
Archer
032, 025
051, 032
022, 051
058, 059
024, 032, 025
029
RCA
061, 070
032
Echostar
100, 113, 114,
115
Cableview
Citizen
Realistic
Regal
058, 064, 040,
041, 042, 045,
068
Express VU
G.E.
100, 113
Curtis
106
Diamond
Eagle
Regency
034
G.I.
108
Rembrandt
037, 032, 051,
038
Gradiente
Hitachi
112
Eastern
GC Brand
Gemini
034
032, 051
022, 043
104, 111
Samsung
051
HNS (Hughes)
Scientific Atlanta 057, 058, 059
104
General Instrument 065, 024, 025,
026, 027, 020,
021, 022, 057,
SLMark
051, 047
051, 056
032, 051
Panasonic
Philips
105
Sprucer
Stargate
102, 103
023
Primestar
108
Hamlin
040, 041, 042,
045, 058, 064
049, 024
Telecaption
Teleview
Texscan
Tocom
067
Proscan
RCA
106, 109, 110
106, 109, 110
Hitachi
Jerrold
047, 051
044
065, 024, 025,
026, 027, 020,
021, 022, 057,
023
Sony
107
035, 036, 066
050
Star Choice
104, 108
Toshiba
Unika
Toshiba
Uniden
101
Macom
049, 050, 051,
054
102, 103
032, 025
Universal
Videoway
Viewstar
Zenith
022, 032
052
Magnavox
033
030
Memorex
Movietime
029, 030
063, 046
046
032, 051
039, 037, 048
Oak
Panasonic
055, 056, 060,
071, 073
Zenith/Drake
Satellite
Paragon
Philips
063
028, 029, 030,
052, 053, 031,
069
Pioneer
Pulsar
047, 062
051, 032
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
VCR Codes
The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,
rewind, pause, record, channel up/down operation.
1) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10
key pad.
4) Release the DISPLAY button, and confirm the operation of the VCR.
• If your VCR does not respond to the first code, try the others listed. If it does not respond to
any of the codes, try the search codes function on page 21.
• After you program your remote, some VCR buttons may not work properly. If so, use the
VCR’s remote.
• To record, hold down the REC button on the remote and press PLAY.
VCRs
CODES
035
027, 032, 095
VCRs
CODES
VCRs
CODES
Admiral
Aiwa
Marantz
Marta
003, 004, 005
064
Samsung
037, 060, 062,
033, 089
Samtron
Sansui
089
Akai
029, 072, 073, Memorex
074
024, 067
003, 026, 020,
052
038, 040, 047,
048, 041, 042
MGA
Audio Dynamic 003, 005
Sanyo
Scott
063, 067, 091,
071
Bell & Howell
Broksonic
Canon
063, 071
020, 026, 094
023, 025
043
Minolta
058, 045, 093
Mitsubishi
038, 040, 047,
048, 041, 042,
078, 090
059, 060, 062,
067, 038, 040,
047, 048, 026,
020
CCE
Multitech
NEC
047, 027, 062
Citizen
064
003, 004, 005,
000
Sears
063, 064, 065,
066, 058, 000,
001
Craig
063, 029, 064
Curtis Mathes
045, 024, 027,
093
Olympic
024, 023
Shintom
Sharp
075
Optimus
028, 021, 035,
064
Daewoo
043, 059, 024,
092
035, 036, 080,
088
026, 020
Orion
DBX
003, 004, 005
Panasonic
023, 024, 021,
022
Signature 2000 027, 035
Dimensia
Emerson
045, 093
Singer
Sony
075
043, 026, 077,
061, 025, 042,
020, 076
Penney
024, 058, 045,
063, 003, 004,
005, 093
028, 029, 030,
053, 054, 055
SV 2000
Sylvania
027
Fisher
Funai
063, 066, 067,
065, 071, 091
Pentax
Philco
058, 005, 045,
093
031, 023, 024,
027
027, 026, 020,
000
031, 024, 027,
023, 026, 020,
043
Symphonic
Tashiro
Tatung
027, 081
064
033, 045, 024
G.E.
Philips
031, 023, 024,
086
003, 004, 005
Go Video
037, 051, 049,
050, 089
Teac
003, 004, 027,
005
Pioneer
Proscan
023
Goldstar
064
045, 058, 023,
024, 031, 046,
059, 060, 033,
087, 093
Technics
021, 022, 023,
024
Gradiente
083, 084, 081,
000, 001
Teknika
Toshiba
024, 027, 070
059, 046, 079
Hitachi
023, 045, 058,
027, 081, 093
Quasar
021, 022, 023,
024
Vector Research 005
Instant Replay 024, 023
Wards
Yamaha
Zenith
035, 036, 067,
044, 064
Radio Shack
033, 024, 063,
036, 067, 040,
027
Jensen
JVC
003
000, 001, 002,
003, 004, 005
063, 003, 004,
005
033, 045, 058,
023, 024, 031,
046, 059, 060,
083, 084, 085,
087, 093
RCA
Kenwood
LXI
003, 004, 064,
005
044, 082, 064,
094
027, 064, 058,
065, 066, 063,
067
Realistic
024, 063, 036,
067, 040, 027
Magnavox
031, 023, 024,
086
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
DVD Codes
The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,
rewind, previous/next chapter, tray open/close, and still/pause operation.
1) Find the DVD player brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10
key pad.
4) Release the DISPLAY button, and confirm the operation of the DVD player.
• If your DVD player does not respond to the first code, try the others listed. If it does not
respond to any of the codes, try the search codes function on page 21.
• After you program your remote, some DVD buttons may not work properly. If so, use the DVD
player’s remote.
DVD Player
Aiwa
CODES
043
DVD Player
RCA
CODES
021, 026
Apex
040
Sampo
Samsung
Sharp
034
030
028
038
Denon
Hitachi
JVC
020, 037
030, 031
000
Silvania
Sony
Kenwood
Konka
035
024, 045, 046,
047
039
Mitsubishi
Onkyo
Oritron
Panasonic
Philips
Pioneer
Raite
025
Technics
Toshiba
Vialta
020
041
023
044
050
020
Wave
042
023, 036
022
Yamaha
Zenith
020
027, 032
033
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
Search Codes
Cable/Satellite Search Codes Function
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press and hold down the POWER button, then press the RETURN+ button for more than three
seconds.
3) Release the RETURN+ button, then release the POWER button.
4) Press the POWER button on the remote, and see if the cable or satellite box responds.
5) If there was a response, press RETURN+. The codes are now set. If there was no
response, repeat Step 4. If you repeat Step 4 a total of 52 times without a response, use
the remote control that came with your equipment.
6) Press RETURN+ to exit.
VCR/DVD Search Codes Function
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or
“DVD”.
2) Press and hold down the VCR or DVD POWER button, then press the RETURN+ button for
more than three seconds.
3) Release the RETURN+ button, then release the VCR or DVD POWER button.
4) Press the VCR or DVD POWER button, and see if the VCR or DVD responds.
5) If there was a response, press RETURN+. The codes are now set. If there was no
response, repeat Step 4. If you repeat Step 4 a total of 80 times for the VCR (30 times for
the DVD player), and there is no response, use the remote control that came with your
equipment.
6) Press RETURN+ to exit.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
Using the Guide
Certain symbols are used throughout this guide to help you learn about the features of your
new television. The ones you will see most frequently are:
π† Up and Down arrows mean press the CH+ or CH– buttons. Pressing the CH+ or CH–
buttons let you:
• Move vertically in a main menu screen
• Move through a submenu screen
• Move to the next letter, number, or other choice in a submenu
• Back up to correct an error
• Scan through TV channels (when not in a menu screen)
√® Left and right arrows mean press the VOLUME+ or VOLUME– buttons to move left or right
to:
• Select a highlighted menu item
• Select an item in a submenu
• Select numbers in certain menu options
• Turn the volume up or down (when not in a menu screen)
The “press button” icon means you should press the button named on your remote
control. (Button names appear in SMALL CAPITAL LETTERS.)
The “helping hand” icon points to the highlighted or selected item in a menu.
To bring up the onscreen menu, press the MENU button on the remote control. The item
that appears in yellow is the one currently selected. If you press the MENU button again, the
onscreen display will skip to the next menu screen. If you use the Menu button on the TV’s front
panel instead of the remote, an additional menu screen showing input and video status mode
will appear. The “interactive plug-in menu” will appear the first time the TV is plugged in.
I N I T I A L
S E T U P 2 / 2
P R E V I O U S
A U T O T U N E R S E T U P
C H A N N E L S U M M A R Y
V – C H I P
S E T L O C K C O D E
N E X T P A G E
S E L E C T
B Y
E X I T
O P E R A T E B Y
E X I T B Y
Notes:
• Menus shown in this book are illustrations, not exact replications of the television’s onscreen
displays.
• If you do not press any buttons for a few seconds, the onscreen menu will automatically shut
off.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
The Onscreen Menu System
Your television comes with JVC’s onscreen menu system. The onscreen menus let you make
adjustments to your television’s operation simply and quickly. Examples of the Onscreen
Menus are shown below. Detailed explanations on using each menu follow later in this guide.
For information about the interactive plug-in Menu, see pages 15 - 17.
Press the MENU button
I N I T I A L
S E T U P 2 / 2
I N I T I A L
S E T U P 1 / 2
P R E V I O U S
L A N G U A G E
P R E V I O U S
E N G . F R A N . E S P.
A U T O T U N E R S E T U P
C H A N N E L S U M M A R Y
V – C H I P
C L O S E D C A P T I O N
F R O N T P A N E L L O C K
A U T O S H U T O F F
X D S I D
O F F
O F F
O N
S E T L O C K C O D E
V I D E O I N P U T L A B E L
N E X T P A G E
N E X T P A G E
S E L E C T
B Y
S E L E C T
B Y
E X I T
O P E R A T E B Y
E X I T B Y
E X I T
O P E R A T E B Y
E X I T B Y
INITIAL SETUP 01
INITIAL SETUP 02
P I C T U R E
C L O C K /
T I M E R S
A D J U S T 1 / 2
P R E V I O U S
T I N T
S T A N D A R D
P R E V I O U S
S E T C L O C K
C O L O R
O N / O F F T I M E R
W O R L D C L O C K
P I C T U R E
B R I G H T
D E T A I L
C O L O R T E M P E R A T U R E
N E X T P A G E
L O W
0
N E X T P A G E
R E S E T B Y
S E L E C T
B Y
S E L E C T
B Y
E X I T
O P E R A T E B Y
E X I T B Y
E X I T
O P E R A T E B Y
E X I T B Y
CLOCK/TIMERS
PICTURE ADJUST 01
P I C T U R E
A D J U S T 2 / 2
S O U N D
A D J U S T
P R E V I O U S
N O I S E M U T I N G
V S M
S T A N D A R D
P R E V I O U S
O N
O N
B A S S
T R E B L E
B A L A N C E
M T S
S T E R E O S A P M O N O
S M A R T S O U N D
N E X T P A G E
O F F
N E X T P A G E
0
0
R E S E T B Y
R E S E T B Y
S E L E C T
B Y
S E L E C T
B Y
E X I T
E X I T
O P E R A T E B Y
E X I T B Y
O P E R A T E B Y
E X I T B Y
SOUND ADJUST
PICTURE ADJUST 02
VSM: AV-32F476, AV-27F476 ONLY
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Auto Tuner Setup
The auto tuner setup function is described on page 17 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the MENU button
I N I T I A L S E T U P
>
A U T O T U N E R S E T U P
π†
è
è
†
To AUTO TUNER SETUP
To operate
T U N E R M O D E
C A B L E
To choose CABLE or AIR
To move to START
S T A R T
è
To start Auto Tuner Setup
S E L E C T
B Y
E X I T
O P E R A T E B Y
E X I T B Y
Programming will take approximately 1 to 2 minutes. The
auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or prevent any unauthorized viewers from watching
any or all 181 channels.
Press the MENU button
I N I T I A L S E T U P
C H A N N E L S U M M A R Y
>
π†
To CHANNEL SUMMARY
To operate
C
H
N
O
.
S
C
A
N
I
D
I
I
I
I
I
I
C
H
N
O
S
C
A
N
I
D
1
2
3
4
5
6
è
7
8
9
The Channel summary screen will now be displayed with
the channels set to scan marked with an “√”. You can
delete channels from the scan by removing the “√”. If any
channels were missed during auto tuner setup and you
wish to add them, you may by placing an “√” next to the
channel number.
1 0
S E L E C T
B Y
E X I T
E X I T B Y
O P E R A T E B Y
I N I T I A L S E T U P
C H A N N E L S U M M A R Y I D
>
>
π†
è
π†
è
è
†
To the SCAN column
C H A N N E L 0 2
To include or delete from scan
To the ID column
To add channel label
F I N I S H
0
R E S E T B Y
S E L E C T
B Y
To insert letter
E X I T
O P E R A T E B Y
E X I T B Y
To next letter
†
To move to FINISH when label is complete
To memorize the label
Press the EXIT button when finished
è
You can block access to a channel by activating the channel lock.
Press the MENU button
π†
è
π†
To CHANNEL SUMMARY
To operate
To the Lock Column (
)
Press the ZERO button to lock or unlock that channel
Press the EXIT button when finished
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Channel Guard Message
When a viewer attempts to watch a guarded channel, the following message appears:
To watch a channel that you have locked, enter the
Lock Code using the 10 key pad.
If the wrong code is entered, the message
“INVALID LOCK CODE!” will flash on the screen.
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
The channel cannot be accessed until the correct code
is entered.
NO. - - - -
Notes:
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.
• See also “Set Lock Code”, page 31.
V-Chip
Your TV is equipped with V-Chip technology which enables you to block channels or content
that you feel to be inappropriate for children, based on US and Canada rating guidelines. V-
Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection.
Note: Some programs, and movies are broadcast without a ratings signal. Even if you set
up V-CHIP ratings limits, these programs will not be blocked. See page 26 for information on
how to block unrated programs.
Note (for Canadian viewers): The V-Chip function is based on specifications designed for
the United States and therefore may not work properly in Canada.
You can customize the V-Chip settings of your television to match your personal tastes. The
V-Chip menu below is the starting point for your V-Chip settings
You can use US V-Chip settings (for programming broadcast from the United States), Canadian
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use any
or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting each
of the three V-Chip formats appear in the next six pages along with descriptions of the rating
categories.
To access the rating categories:
I N I T I A L S E T U P
>
V – C H I P
Press the MENU button
V – C H I P
O F F
S E T U S T V R A T I N G S
S E T M O V I E R A T I N G S
π†
è
To V-CHIP
To operate (Lock icon
will appear)
S E T C A N A D I A N R A T I N G S E N G
S E T C A N A D I A N R A T I N G S F R E
Press ZERO to access the V-Chip menu
U N R A T E D
V I E W
F I N I S H
è
To turn V-Chip ON or OFF (V-Chip must be
turned ON for rating settings to operate)
S E L E C T
B Y
E X I T
E X I T B Y
O P E R A T E B Y
π†
To move to SET US TV RATINGS,
SET MOVIE RATINGS, or SET CANADIAN RATINGS (see following pages for
descriptions of each item)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Unrated Programs
Unrated programming refers to any programming which does not contain a rating signal.
Programming on television stations which do not broadcast rating signals will be placed in the
“Unrated Programming” category.
Examples of Unrated programs:
• Emergency Bulletins
• News
• Public Service Announcements
• Sports
• Locally Originated Programming
• Political Programs
• Religious Programs
• Weather
• Some Commercials
Note:
• TV programs or movies that do not have rating signals will be blocked if the unrated category
is set to BLOCK.
Directions to Block Unrated Programs
You can block programs that are not rated.
Press the MENU button
I N I T I A L S E T U P
>
V – C H I P
V – C H I P
O F F
π†
To V-CHIP
S E T U S T V R A T I N G S
S E T M O V I E R A T I N G S
è
To operate (The lock icon
appears)
S E T C A N A D I A N R A T I N G S E N G
S E T C A N A D I A N R A T I N G S F R E
Press ZERO to access V-Chip setup options
U N R A T E D
V I E W
π†
To UNRATED
F I N I S H
S E L E C T
B Y
è
To VIEW or BLOCK
E X I T
E X I T B Y
O P E R A T E B Y
Press EXIT when done
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
US V-Chip Ratings
U.S. PARENTAL RATING SYSTEMS
Programs with the following ratings are appropriate for children.
❒ TV Y is Appropriate for All Children
Programs are created for very young viewers and should be suitable for all ages, including
children ages 2 - 6.
❒ TV Y7 is for Older Children
Most parents would find such programs suitable for children 7 and above. These programs
may contain some mild fantasy violence or comedic violence, which children should be able
to discern from reality.
Programs with the following ratings are designed for the entire audience.
❒ TV G stands for General Audience
Most parents would find these programs suitable for all age groups. They contain little or no
violence, no strong language, and little or no sexual dialog or situations.
❒ TV PG Parental Guidance Suggested
May contain some, but not much, strong language, limited violence, and some suggestive
sexual dialog or situations. It is recommended that parents watch these programs first, or
with their children.
❒ TV 14 Parents Strongly Cautioned
Programs contain some material that may be unsuitable for children under the age of 14
including possible intense violence, sexual situations, strong coarse language, or intensely
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.
❒ TV MA Mature Audiences Only
These programs are specifically for adults and may be unsuitable for anyone under 17 years
of age. TV MA programs may have extensive V, S, L, or D.
Viewing Guidelines
In addition to the ratings categories explained above, information on specific kinds of content
are also supplied with the V-Chip rating. These types of content may also be blocked. The
content types are:
• V/FV is for VIOLENCE/FANTASY VIOLENCE
• S stands for SEXUAL CONTENT
• L stands for strong LANGUAGE
• D stands for suggestive DIALOG
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Setting US V-Chip Ratings
Press the MENU button
I N I T I A L S E T U P
V – C H I P
>
V – C H I P
O F F
π†
è
To V-CHIP
To operate (lock icon
S E T U S T V R A T I N G S
S E T M O V I E R A T I N G S
appears)
S E T C A N A D I A N R A T I N G S E N G
S E T C A N A D I A N R A T I N G S F R E
Press ZERO to access the V-Chip menu
U N R A T E D
V I E W
è
π†
è
To turn V-Chip ON or OFF
To move to SET US TV RATINGS
To operate
F I N I S H
S E L E C T
B Y
E X I T
E X I T B Y
O P E R A T E B Y
Directions to set US V-Chip Ratings
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and
press the or to move the cursor to the correct location. Press or to turn the locking
feature on or off. An item is locked if the icon appears instead of a “—”.
π
†
√
®
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that
column and add a lock icon. Once you’ve put a lock on the top row, everything in that column
is automatically locked.
π†
è
π†
è
To the TV 14 Column
To turn on the lock
To FINISH
To save settings and exit
Press the EXIT button when finished
Note:
• If you want to change the setup, move the cursor to the top column and change the lock icon
to “—” by pressing or again. You may then select individual categories to block.
√
®
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Movies Ratings
❒ NR – Not Rated
This is a film which has no rating. In many cases these films were imported from countries
which do not use the MPAA ratings system. Other NR films may be from amateur producers
who didn’t intend to have their film widely released.
NR (Not Rated) Programming may contain all types of programming including
children’s programming, foreign programs, or adult material.
❒ G – General Audience
In the opinion of the review board, these films contain nothing in the way of sexual content,
violence, or language that would be unsuitable for audiences of any age.
❒ PG – Parental Guidance
Parental Guidance means the movie may contain some contents such as mild violence,
some brief nudity, and strong language. The contents are not deemed intense.
❒ PG-13 – Parents Strongly Cautioned
Parents with children under 13 are cautioned that the content of movies with this rating may
include more explicit sexual, language, and violence content than movies rated PG.
❒ R – Restricted
These films contain material that is explicit in nature and is not recommended for
unsupervised children under the age of 17.
❒ NC-17 – No One Under 17
These movies contain content which most parents would feel is too adult for their children
to view. Content can consist of strong language, nudity, violence, and suggestive or explicit
subject matter.
❒ X – No One under 18
Inappropriate material for anyone under 18.
Directions to set Movie (MPAA) Ratings
Press the MENU button
π†
è
To V-CHIP
To operate (Lock icon
appears)
Press ZERO to access V-Chip setup options
π†
è
To SET MOVIE RATINGS
To enter movies menu
For example:
To block viewing of X and NC-17 rated from shows:
I N I T I A L S E T U P
S E T M O V I E R A T I N G S
>
V – C H I P
>
π†
è
π†
To the X Column
N
P
X
R
PG
G
NR
C-17
G-13
To turn on the lock
To the NC-17 Column
To turn on the lock
F I N I S H
è
π†
è
S E L E C T
B Y
E X I T
E X I T B Y
O P E R A T E B Y
To FINISH
To save settings and exit
Press the EXIT button when finished
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Canadian V-Chip Ratings
❒ E – Exempt
Exempt programming includes: news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
❒ C – Programming Intended for Children
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or
unrealistic in nature.
❒ C8+ – Programming Intended for Children 8 and Over
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low
intensity and will show the consequences of the acts. There will be no offensive language,
nudity or sexual content.
❒ G – General Audience
Programming will contain little violence and will be sensitive to themes which could affect
younger children.
❒ PG – Parental Guidance
Programming intended for a general audience, but which may not be suitable for younger
children. Parents may consider some content not appropriate for children aged 8-13.
❒ 14+ – 14 Years and Older
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and
early teens. Programming may contain mature themes and scenes of intense violence.
❒ 18+ – Adult
Material intended for mature audiences only.
Directions to set Canadian V-Chip Ratings
Press the MENU button
π†
è
To V-CHIP
To operate (lock icon
appears)
Press ZERO to access V-Chip setup options
π†
è
To SET CANADIAN RATINGS ENG (for English)
To enter ratings menu
For example:
To block viewing of programming rated 14+ and 18+:
I N I T I A L S E T U P
S E T M O V I E R A T I N G S
>
V – C H I P
>
π†
è
To the 18+ Column
To turn on the lock
P
C
G
C
14+
18+
G
8
π†
è
π†
To the 14+ Column
To turn on the lock
To FINISH
F I N I S H
S E L E C T
B Y
è
To save settings and exit
Press the EXIT button when finished
E X I T
E X I T B Y
O P E R A T E B Y
Note:
• For instructions on “SET CANADIAN RATINGS FRE (in French)”, please see page 30 in the
French side of this user’s guide.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Set Lock Code
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes
preset with a lock code of “0000”. You may change the code to any four-digit number you wish.
To change the lock code, follow the steps below.
Press the MENU button
I N I T I A L S E T U P
>
S E T L O C K C O D E
L O C K C O D E
F I N I S H
π†
To SET LOCK CODE
To operate (lock icon
è
appears)
0 0 0 0
Press ZERO to access the lock code
The first digit will be highlighted
S E L E C T
B Y
E X I T
E X I T B Y
O P E R A T E B Y
è
π†
To select the number
To move to the next digit
Continue to follow these directions for all four numbers
π†
To FINISH
è
To save settings and exit
(your lock code is now set)
Press the EXIT button when finished
When a viewer attempts to watch a blocked channel, this message appears:
THIS PROGRAMMING EXCEEDS
YOUR RATING LIMITS.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. - - - -
The channel will remain blocked until the correct lock code is entered (see above for
information on setting your lock code).
Notes:
• After a power interruption you must reset the lock code.
• Write your lock code number down and keep it hidden from potential viewers.
• If you forget the lock code, a new code may be set using the steps listed above.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Language
The language function is described on page 15 as the interactive plug-in menu. If you need to
choose the language again, follow the steps below.
I N I T I A L
S E T U P 1 / 2
P R E V I O U S
Press the MENU button
π†
To LANGUAGE
L A N G U A G E
E N G . F R A N . E S P.
C L O S E D C A P T I O N
F R O N T P A N E L L O C K
A U T O S H U T O F F
X D S I D
è
To choose a language: ENG. (English), FRAN.
(French) or ESP. (Spanish)
O F F
O F F
O N
V I D E O I N P U T L A B E L
N E X T P A G E
Press the EXIT button when finished
S E L E C T
B Y
E X I T
O P E R A T E B Y
E X I T B Y
Closed Caption
Many broadcasts now include an onscreen display of dialog called closed captions. Some
broadcasts may also include displays of additional information in text form. Your television can
access and display this information using the closed caption feature. To activate the closed
caption feature, follow the steps below.
Press the MENU button
π†
è
π†
è
To CLOSED CAPTION
To operate
To select CAPTION or TEXT
To select a caption (CC1 to CC4) or text
channel (T1 to T4)
I N I T I A L S E T U P
C L O S E D C A P T I O N
>
C A P T I O N
T E X T
C C 1
T 1
π†
è
To accept that selection and move to FINISH
To save settings and exit
F I N I S H
S E L E C T
B Y
E X I T
Press the EXIT button when finished
O P E R A T E B Y
E X I T B Y
Notes:
• Closed caption subtitles are usually found on closed caption channel CC1. Some programs
may include additional text information which is usually found on text channel T1. The other
channels are available for future use.
• Closed captioning may not work correctly if the signal being received is weak or if you are
playing a video tape.
• Most broadcasts containing closed captioning will display a notice at the start of the program.
• To select the mode, press the C.C. button. See page 44.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Front Panel Lock
This allows you to lock the keys on the front of the TV, so that a child may not accidentally
change your viewing preferences.
Press the MENU button
π†
è
To FRONT PANEL LOCK
To turn ON or OFF
Press the EXIT button when finished
You can turn off this feature in the following ways:
• Unplug the power cord, and plug it back in. Do this if your batteries die, or you lose your
remote control.
• Use the remote control.
• Press the MENU button on the front of the TV for more than 3 seconds. In this case, the OSD
for FRONT PANEL LOCK will appear.
Note:
• To turn ON/OFF the TV, press the power button on the front of the TV for more than 3
seconds. This feature will remain ON.
Auto Shut Off
This function automatically shuts off your TV when there is no signal from the channel the TV is
on.
Press the MENU button
π†
è
To AUTO SHUT OFF
To turn ON or OFF
Press the EXIT button when finished
• If the channel that you have on does not receive a signal for more than one minute, the
blinking text “NOT RECEIVING A SIGNAL” appears on the screen, and starts the countdown.
If no signal is being received within 10 minutes, the TV shuts itself off.
XDS ID
XDS ID Display provides a channel’s call letters, the network’s name, and even a program
name. The XDS ID information is provided by the broadcaster.
Press the MENU button
π†
è
To XDS ID
To turn ON or OFF
Press the EXIT button when finished
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Video Input Label
This function is used to label video input connections for the onscreen displays.
Press the MENU button
I N I T I A L
S E T U P 1 / 2
π†
è
π†
è
To VIDEO INPUT LABEL
To operate
P R E V I O U S
L A N G U A G E
E N G . F R A N . E S P.
C L O S E D C A P T I O N
F R O N T P A N E L L O C K
A U T O S H U T O F F
X D S I D
O F F
O F F
O N
To select the desired video input
V I D E O I N P U T L A B E L
N E X T P A G E
To select the desired preset input label (see
chart below)
S E L E C T
B Y
E X I T
E X I T B Y
O P E R A T E B Y
π†
To FINISH
è
To save settings and exit
Press the EXIT button when finished
I N I T I A L S E T U P >
V I D E O I N P U T L A B E L
V I D E O - 1
V C R
V I D E O - 2
D V D
S A T
V 2 - C O M P O N E N T
V I D E O - 3
G A M E
F I N I S H
S E L E C T
B Y
E X I T
O P E R A T E B Y
E X I T B Y
Preset
Labels
Select when...
VCR
DVD
DVHS
STB
You have a VCR connected to the video input
You have a DVD connected to the video input
You have a Digital VCR connected to the video input
You have a Set-top Box connected to the video input
You have a Satellite Receiver connected to the video input
You have an Amplifier connected to the video input
You have a Video Game connected to the video input
You have a Video Camera connected to the video input
You have a Video Disc player connected to the video input
SAT
AMP
GAME
CAM
DISC
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust
Picture Settings
These settings allow you to change and adjust the way the picture appears on your television.
TINT
Tint allows you to adjust the levels of red and green in your TV picture.
COLOR
The color function lets you make all the colors in the TV picture appear either more vivid or
subtle.
PICTURE
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker
or brighter picture overall.
BRIGHT
You can adjust the overall brightness of the TV picture with the Bright control.
DETAIL
The Detail feature adjusts the level of fine detail displayed in the picture.
Adjust the Picture Settings
Press the MENU button
P I C T U R E
A D J U S T 1 / 2
π†
To TINT, COLOR, PICTURE, BRIGHT or
DETAIL
P R E V I O U S
T I N T
S T A N D A R D
C O L O R
è
è
π†
To enter
To adjust the setting
To move to the next setting
P I C T U R E
B R I G H T
D E T A I L
C O L O R T E M P E R A T U R E
N E X T P A G E
L O W
0
R E S E T B Y
S E L E C T
B Y
Press the EXIT button when finished
E X I T
O P E R A T E B Y
E X I T B Y
Note:
• If you press the 0 button, you can reset the setting to the factory default setting.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust
Color Temperature
You can decide how strong or dull the colors appear on the TV screen.
Press the MENU button
P I C T U R E
A D J U S T 1 / 2
P R E V I O U S
T I N T
π†
è
è
To COLOR TEMPERATURE
To enter
S T A N D A R D
C O L O R
P I C T U R E
To set LOW or HIGH
B R I G H T
D E T A I L
Press the EXIT button when finished
C O L O R T E M P E R A T U R E
N E X T P A G E
L O W
0
R E S E T B Y
S E L E C T
B Y
E X I T
O P E R A T E B Y
E X I T B Y
Note: If you press the 0 button, you can reset the setting to the factory default setting.
Noise Muting
This feature inserts a blank blue screen over channels which are not broadcasting or are too
weak to be received clearly.
Press the MENU button
P I C T U R E
A D J U S T 2 / 2
P R E V I O U S
N O I S E M U T I N G
V S M
S T A N D A R D
O N
π†
To NOISE MUTING
O N
è
To turn noise muting ON or OFF
Press the EXIT button when finished
N E X T P A G E
0
R E S E T B Y
S E L E C T
B Y
E X I T
O P E R A T E B Y
E X I T B Y
Note:
• Noise muting will not work during auto tuner setup or when you operate channel summary.
(VSM) Velocity Scan Modulation
Velocity scan modulation circuitry varies the electron beam’s horizontal scanning speed to help
accentuate the differences in picture brightness to sharpen the edges of images.
Press the MENU button
P I C T U R E
A D J U S T 2 / 2
P R E V I O U S
N O I S E M U T I N G
V S M
S T A N D A R D
O N
π†
è
è
To VSM
O N
To enter
To turn VSM ON or OFF
N E X T P A G E
0
R E S E T B Y
S E L E C T
B Y
E X I T
O P E R A T E B Y
E X I T B Y
Note: If you press the 0 button, you can reset the
setting to the factory default setting.
VSM: AV-32F476, AV-27F476 ONLY
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjust
Sound Settings
These settings allow you to change and adjust the sound on your television.
BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with
the bass adjustment.
TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio.
BALANCE – Adjust the level of sound between the TV’s left and right speakers with the
balance setting.
Adjust the Sound Settings
Press the MENU button
S O U N D
A D J U S T
P R E V I O U S
π†
è
π†
To BASS, TREBLE or BALANCE
To adjust the setting
B A S S
T R E B L E
B A L A N C E
M T S
To move to the next setting
S T E R E O S A P M O N O
S M A R T S O U N D
N E X T P A G E
O F F
Press the EXIT button when finished
0
R E S E T B Y
S E L E C T
B Y
E X I T
O P E R A T E B Y
E X I T B Y
Note:
• If you press the 0 button, you can reset the setting to the factory default setting.
MTS (Multi-Channel Television Sound)
MTS technology allows several audio signals to be broadcast at once, giving you a choice
in what you wish to hear with a TV program. In addition to mono or stereo sound, an
MTS broadcast may also include a second audio program (SAP).
Press the MENU button
π†
To MTS
è
Select the mode
(The ON AIR arrow tells you if a broadcast is in stereo and/or contains an SAP).
Press the EXIT button when finished
Notes:
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
Smart Sound
Decreases high sound levels, giving a regulated sound level.
Press the MENU button
π†
To SMART SOUND
è
To turn ON or OFF
Press the EXIT button when finished
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timers
Set Clock
The set clock function is described on page 16 as the interactive plug-in menu. You can choose
to set the clock automatically, or manually. If you need to set the clock again, follow the steps
below.
Press the MENU button
π†
To SET CLOCK
To operate
è
When you set the clock automatically, choose AUTO by pressing the
√
or
®
arrows.
π†
è
π†
è
†
To TIME ZONE
C L O C K / T I M E R S
S E T C L O C K
>
To select your time zone
To D.S.T. (daylight savings time)
To turn D.S.T. ON or OFF
To FINISH
M O D E
A U T O
– – : – – – –
T I M E
T I M E Z O N E
D . S . T .
P A C I F I C
O F F
F I N I S H
S E L E C T
B Y
è
To save settings
E X I T
O P E R A T E B Y
E X I T B Y
Press the EXIT button when finished
When you set the clock manually, choose MANUAL by pressing the
√
or
®
arrows.
π†
è
π†
è
†
To move to the hour
To set the hour
C L O C K T I M E R S
S E T C L O C K
>
To move to minutes
To set the minutes
To START CLOCK
To operate
M O D E
M A N U A L
– – : – – – –
T I M E
T I M E Z O N E
D . S . T .
P A C I F I C
O F F
è
S T A R T C L O C K
B Y
S E L E C T
E X I T
E X I T B Y
O P E R A T E B Y
THANK YOU !!
Notes:
• D.S.T. can be used only for US and Canada when it is set to ON in the SET CLOCK menu.
• Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts
your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on
the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in
October.
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timers
On/Off Timer
The on/off timer lets you program your television to turn itself on or off. You can use it as an
alarm to wake up, to help you remember important programs, or as a decoy when you’re not
home.
Press the MENU button
C L O C K / T I M E R S
>
O N / O F F T I M E R
π†
è
è
To ON/OFF TIMER
O N T I M E
7 : 0 0 P M
1 0 : 0 0 P M
0 2
O F F T I M E
C H A N N E L
O N V O L U M E
M O D E
To operate (begins with ON TIME)
C U R R E N T
E V E R Y D AY
N O
To set the hour (AM/PM) you want the TV to turn
on
O N / O F F T I M E R
F I N I S H
S E L E C T
B Y
†
è
†
To move to minutes
To set the minutes
E X I T
E X I T B Y
O P E R A T E B Y
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the
OFF TIME the same way as ON TIME
†
è
†
To accept OFF TIME and move to CHANNEL
To select channel
To ON VOLUME
è
†
To set the volume level
To move to MODE
è
Choose ONCE or EVERYDAY
†
è
†
To ON/OFF TIMER
Choose YES to accept the timer setting, choose NO if you don’t wish to accept
To FINISH
è
To save settings
Press the EXIT button when finished
Notes:
• The on/off time cannot be set to locked or guarded channels.
• In order for the on/off timer to work, the clock must be set.
• After a power interruption, the timer settings must be reset.
• If you turn on your TV set before the on time, when the TV reaches the on time that you set,
the "SWITCHING TO ON TIMER" will appear. This means that the TV is going to change to
your on/off timer setting.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timers
World Clock
The world clock feature provides time differences for some of the major cities around the world
in real time.
Press the MENU button
C L O C K /
T I M E R S
P R E V I O U S
π†
è
è
To WORLD CLOCK
To operate
S E T C L O C K
O N / O F F T I M E R
W O R L D C L O C K
To next page
N E X T P A G E
Press the EXIT button when finished
S E L E C T
B Y
E X I T
O P E R A T E B Y
E X I T B Y
Note:
C L O C K T I M E R S
W O R L D C L O C K
>
• For the proper performace of the function, the XDS
information must be provided by the broadcaster.
A M E R I C A S - 1
N E W Y O R K
C H I C A G O
P A G E
1
– – : – – – –
– – : – – – –
– – : – – – –
– – : – – – –
– – : – – – –
– – : – – – –
• D.S.T. can be used only for US and Canada when it is
set to ON in the SET CLOCK menu.
D E N V E R
L O S A N G E L E S
H O N O L U L U
R I O D E J A N E I R O
E X I T
E X I T B Y
O P E R A T E B Y
C L O C K T I M E R S
W O R L D C L O C K
>
A M E R I C A S - 2
T O R O N T O
P A G E
2
– – : – – – –
– – : – – – –
– – : – – – –
– – : – – – –
– – : – – – –
– – : – – – –
V A N C O U V E R
M O N T R E A L
M E X I C O C I T Y
S A O P A U L O
B U E N O S A I R E S
E X I T
E X I T B Y
O P E R A T E B Y
C L O C K T I M E R S
W O R L D C L O C K
>
E U R O P E
L O N D O N
P A R I S
P A G E
3
– – : – – – –
– – : – – – –
– – : – – – –
– – : – – – –
– – : – – – –
– – : – – – –
R O M E
B E R L I N
H E L S I N K I
M O S C O W
E X I T
E X I T B Y
O P E R A T E B Y
C L O C K T I M E R S
W O R L D C L O C K
>
A S I A / P A C I F I C
T O K Y O
P A G E
4
– – : – – – –
– – : – – – –
– – : – – – –
– – : – – – –
– – : – – – –
– – : – – – –
B E I J I N G
S I N G A P O R E
B A N G K O K
N E W D E L H I
S Y D N E Y
E X I T
E X I T B Y
O P E R A T E B Y
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Power
Turns the TV on or off.
Press the POWER button
Number Buttons - 10Key Pad
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 7:
0 (Zero)
7 (Seven)
100+ Button
Use the 100+ button to directly access channels above channel 99. For example, to move to
channel 124, press 100+, 2 (Two), 4 (Four).
Channel +/–
Use these buttons to move up or down all the available channels your TV is able to recieve.
Volume +/–
Use these buttons to raise or lower the TV’s volume level.
Muting
The MUTING button instantly turns the volume down completely when you press it. Press
MUTING and the volume level will instantly go to zero. To restore the volume to its previous level,
press MUTING again.
Menu
The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate
the onscreen menu system.
• See individual topics like “Sound Adjust” for specific information on using menus.
Exit
Use this button to enter or exit the TV’s onscreen menus.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Return +
The RETURN+ button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the channels
using the CH+ and CH– buttons.
RETURN+ and hold for three seconds
RETURN CHANNEL
PROGRAMMED!
The channel currently active has been programmed as your return+ channel. Now scan through
the channels using the CHANNEL+/– buttons.
RETURN+
You will return to your programmed channel.
• To cancel your Return+ channel, press and hold the RETURN+ button for three seconds. The
message “RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with the CH+/– buttons. Pressing any number key will cancel Return+.
Input
Selects the signal input source for the television: TV (for Antenna or Cable) or Video-1, 2, or
V2-Component or Video-3 for video devices like VCR’s, DVD players, or camcorders.
Press the INPUT button
TV
VIDEO-1
VIDEO-2
V2-COMPONENT
VIDEO-3
Note:
• You can also access the input menu screen by using the MENU button on the front of the TV
instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST
screen. Choose the INPUT by pressing MENU
†
on the front panel and select TV or VIDEO
).
INPUT by using the CHANNEL +/- buttons ( OPERATE
√
®
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Display
The display screen shows the current status of timers, inputs, and XDS ID.
Press the DISPLAY button
07 KLVX PBS
The screen to the right shows the following information:
JAZZ FESTIVAL
• The current channel or AV input (Channel 07)
• The current time (12:20 pm)
• Sleep timer status/minutes remaining (The Sleep Timer
is off)
• On/off timer status (Set to turn on everyday at 7:00 PM,
off at 10:00 PM)
NOW
12 : 20 PM
OFF
SLEEP TIMER
ON/OFF TIMER
EVERYDAY
7 : 00 PM
10 : 00 PM
ON TIME
OFF TIME
• Each Press of the DISPLAY button changes the display
mode
Display
Time
Channel
Off
Display - Full screen shown above
Time - Shows the current time only
Channel - Shows the current channel
Off - Turns display off
Notes:
• You may also turn off the display at any step by pressing MENU.
• If the clock, sleep timer or on/off timer are not set, the display screen will show:
“CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.
Sleep Timer
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals
of 15 minutes, for a total time of up to 180 minutes.
Press the SLEEP TIMER button
0 15 30 45 60 75 90 105 120 135 150 165 180
Sleep Timer Message
20 seconds before the automatic shutoff, this message will appear:
GOOD NIGHT!!
PUSH SLEEP TIMER BUTTON
TO EXTEND
You then have 20 seconds to press the sleep timer button to delay the shut off for another
15 minutes.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Sound
The SOUND button give you a choice of two sound effects.
Hyper Surround - Creates a deep, three-dimensional sound effect by channeling the audio
through the TV’s front-firing speakers. (AV-32F476, AV-27F476 ONLY)
BBE - BBE High Definition Sound restores clarity and presence for better speech intelligibility
and musical realism. (AV-32F476, AV-27F476 ONLY)
Press the SOUND button
AV-20F476 ONLY
π†
To select HYPER SURROUND or BBE
To choose the setting
HYPER SURROUND
ON OFF
è
Press the EXIT when finished
AV-32F476, AV-27F476 ONLY
S O U N D E F F E C T
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258,
5510752 and 5736897. BBE and BBE symbol are
registered trademarks of BBE Sound, Inc.
H Y P E R S U R R O U N D
B B E
O F F
O N
S E L E C T
B Y
E X I T
O P E R A T E B Y
E X I T B Y
C.C. (Closed Caption)
Use the C.C. (Closed Caption) button to select the mode of closed caption.
Press the C.C. button
SMART CAPTION
CAPTION
TEXT
OFF
• Smart Caption will appear when you press the MUTING button, only on channels
where the broadcast contains closed captioning.
• See page 32 when you set the caption/text mode.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Video Status
The VIDEO STATUS button gives you a choice of four TV picture display settings, including a
display of your own preferences.
STANDARD - Resets the picture display to the factory settings.
DYNAMIC - Heightens contrast.
THEATER - Gives a rich, film-like look to video when viewing in a dimly lit room.
GAME - Used for when you are playing video games connected to your TV.
Press the VIDEO STATUS button
By every press of the video status button, you change the mode.
STANDARD
DYNAMIC
THEATER
GAME
TheaterPro D6500K
The TheaterPro D6500K color temperature technology function makes sure that the video you
watch is set to the standard color temperature. This will adjust the picture quality to what the
video film editors intended it to be.
Press the THEATER PRO button
Aspect
This adjusts the dimensions of the film or movie you are watching so that the image doesn’t
look stretched or squashed together.
Press the ASPECT button
ASPECT
16:9 4:3
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
TV/CATV Slide Switch
Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to
operate the television’s built-in tuner. Move the switch to CATV to operate a cable box.
Note:
• See page 18 for information on programming your remote for cable box operation.
VCR/DVD Slide Switch
You can control a VCR or DVD player with the buttons on the lower part of the remote control.
Move the slide switch to VCR or DVD to operate.
Notes:
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other
manufacturer’s brand VCR, please see the code chart and instructions on page 19.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 20.
VCR Buttons
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and
power off.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other
manufacturer’s brand VCR, please see the code chart and instructions on page 19.
DVD Buttons
You can also use this remote control to operate the basic functions of your DVD player. These
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,
power on, and power off.
Move the selector switch to DVD to operate.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 20.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
CHECK
PROBLEMS
There is no power
• See if the power cord became unplugged.
• Check for a blown fuse or circuit breaker or a power outage.
There is no picture
or sound
• The antenna could be disconnected.
• The input mode could be set improperly. See page 42.
• The tuner (Auto Tuner Setup) could be set improperly. See page 24.
• The TV station may be having difficulties. Check to see if other stations are working.
Remote control is not • Check to see that the batteries are still working and properly installed.
operating properly or • Make sure the remote has a clear sight path to the TV.
at all
• Check that the TV/CATV switch is in the proper position.
• You may be too far from the TV. You must be within 23 feet (7 meters).
You cannot select a
certain channel
• Make sure the channels have been programmed. See "Channel Summary", page 24.
• Check to see if the channel is locked. See "Channel Summary - Lock" page 25.
The power turns off
by itself
• Make sure the set did not become unplugged.
• Perhaps the On/Off Timer is set. See page 40.
• Check to see if the Sleep Timer was set. See page 43.
The clock is wrong
• The power was interrupted and the clock was not reset. See page 38.
• There is a problem with the TV. Unplug the set and call for service.
The On Timer is
blinking
The color quality
is poor
• Tint and Color may be improperly adjusted. See page 35.
• The Video Status mode may be turned to the wrong setting. See page 45.
There are lines
across the picture
• There could be interference from another electrical appliance, such as a computer,
another TV or VCR. Move any such appliances further away from the TV.
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference.
The picture is spotted
There are double
pictures (ghosts)
• A building or passing airplane can reflect the original signal and produce a second,
slightly delayed one. Adjust your antenna position.
Picture is snowy
(image noise)
• Your antenna may be damaged, disconnected or turned. Check the antenna
connection. If the antenna is damaged, replace it.
Screen is 80% black • The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 32.
Stereo or bilingual
programs can't be
heard
• Make sure the MTS settings are correct. See "MTS" on page 37.
There is no picture
being displayed for
INPUT-2
• Check your AV Cables to make sure they are connected tightly and properly.
• In case you are connecting using component cables to V2, make sure you select
"V2-COMPONENT" by pressing the INPUT button. See page 13 and 42.
• In case you are connecting using composite cables to V2, make sure you select
"VIDEO-2" by pressing the INPUT button. See page 13 and 42.
The Ol mark will appear if you press the ASPECT button under these conditions:
• While noise muting is on over channels which are not broadcasting or are too weak to
be received.
l
O mark appears
• When a channel is locked by CHANNEL GUARD.
Static electricity
• It is normal to feel static electricity if you brush or touch the screen.
You hear occasional • It is normal for the TV to make crackling sounds when first turned on or off. Unless
crackling sounds the sound or picture become abnormal, this is fine.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
MODEL
AV-32F476
AV-27F476
Reception
Format
NTSC, BTSC System (Multi-Channel Sound)
VHF 2 to 13, UHF 14 to 69
Sub Mid, Mid, Super, Hyper and Ultra bands
(181 channel frequency synthesizer system)
Reception
Range
Power Source
AC 120V, 60Hz
Power
Consumption
140W
160W
Screen Size
32 inch / 80 cm
measured diagonally
full square
27 inch / 68 cm
measured diagonally
full square
Audio Output
Speakers
9W + 9W
2 1/2 x 5 inch / 6.5 x 13 cm oval x 2
Antenna
Terminal
75 ohms (VHF/UHF) (F-type connector)
External Input
Jacks
Video: 1 Vp-p, 75 ohms
Audio: 500mVrms (-4dBs) high impediance
S-Video Input
Jack
Y: 1Vp-p positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
Component
Input Jacks
Y: 1Vp-p positive, 75 ohms (negative sync provided)
PB/PR: 0.7 Vp-p, 75 ohms
FIX; 500 mVrms (-4dBs) Low impedance
(400 Hz when modulated 100%)
Audio Output
Jacks (FIX)
Dimensions (In)
WxHxD (cm)
37 x 27 x 22 1/2
93.9 x 68.5 x 57
32 3/4 x 23 3/8 x 20 1/2
82.9 x 59.3 x 51.9
Weight (lbs / kg)
Accessories
140.8 / 64
94.6 / 43
Remote control unit x 1 / AA batteries x 2
Specifications subject to change without notice.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
MODEL
AV-20F476
Reception
Format
NTSC, BTSC System (Multi-Channel Sound)
VHF 2 to 13, UHF 14 to 69
Sub Mid, Mid, Super, Hyper and Ultra bands
(181 channel frequency synthesizer system)
Reception
Range
Power Source
AC 120V, 60Hz
85W
Power
Consumption
Screen Size
20 inch / 51 cm
measured diagonally
full square
Audio Output
Speakers
3W + 3W
2 1/2 x 5 inch / 6.5 x 13 cm oval x 2
75 ohms (VHF/UHF) (F-type connector)
Antenna
Terminal
External Input
Jacks
Video: 1 Vp-p, 75 ohms
Audio: 500mVrms (-4dBs) high impedance
S-Video Input
Jack
Y: 1Vp-p positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
Component
Input Jacks
Y: 1Vp-p positive, 75 ohms (negative sync provided)
PB/PR: 0.7 Vp-p, 75 ohms
FIX; 500 mVrms (-4dBs) Low impedance
(400 Hz when modulated 100%)
Audio Output
Jacks (FIX)
Headphone
Jack
Ø 3.5 mm x 1
Dimensions (In)
WxHxD (cm)
26 3/8 x 19 x 20
66.7 x 48.1 x 50.5
Weight (lbs / kg)
Accessories
55 / 25
Remote control unit x 1 / AA batteries x 2
Specifications subject to change without notice.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
JVC COMPANY OF AMERICA
Division of JVC Americas Corp.
1700 Valley Road
JVC CANADA, INC.
21 Finchdene Square
Scarborough, Ontario
Canada, M1X 1A7
Wayne, New Jersey, 07470
Download from Www.Somanuals.com. All Manuals Search And Download.
|