COLOR TELEVISION
AV-21YT11
AV-20NT11
AV-14FT11
AV-21YN11
AV-20NN11
AV-14FN11
INSTRUCTIONS
GGT0006-001A-H
0303-NIC-JMT
2003 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
3
C O N N E C T I O N S
FRONT & REAR PANEL DIAGRAMS
AV-21YT11
AV-20NT11
AV-14FT11
Rear Panel
ON
TIMER POWER
+
– CHANNEL
;
+
MENU
– VOLUME
EXIT
V
L/MONO
R
OPERATE :
IN (VIDEO-2)
AV-21YT11 Front Panel
AV-20NT11/AV-14FT11 Front Panel
AV-21YN11
AV-20NN11
AV-14FN11
Rear Panel
ON
TIMER POWER
+
– CHANNEL
;
+
MENU
– VOLUME
EXIT
VIDEO AUDIO
IN
OPERATE :
AV-21YN11 Front Panel
AV-20NN11/AV-14FN11 Front Panel
INDOOR ANTENNA CONNECTION
To Install rod aerial:
Install into the top-rear aerial holder.
Once installed, it cannot be removed.
You can connect an indoor antenna
included.
VHF/UHF indoor Antenna
(supplied)
TV
1) Connect the indoor antenna to
the Matching adaptor and connect
the Matching adaptor to the TV RF
input.
❒ You will receive the best reception,or
best picture, if you use connect your
TV to an outdoor antenna of a cable
output.
Matching adaptor
(supplied)
Illustration of AV-14FN11
Download from Www.Somanuals.com. All Manuals Search And Download.
4
C O N N E C T I O N S
CONNECTING THE ANTENNA AND VCR
• For further details, refer to the manuals provided with the devices you are connecting.
• Connecting cables are not supplied.
VHF/UHF outdoor antenna
If not connecting a VCR, do 1.
If connecting a VCR, proceed
3.
1
2
• You can view images from the
VCR without doing 3.
Note: When connecting mon-
aural audio to the TV,
use the L/MONO jack.
Note: The sound and picture
that you are watching
Illustration of AV-21YT11
1
3
are output from VIDEO/
AUDIO (L/R) output
2
jacks on the rear panel.
Note: The front and rear AU-
DIO/VIDEO input jacks
are directly connected so
that input to either jack is
output through both. You
cannot provide input to
both the front and rear
jacks at the same time.
Disconnect one input, or
use one of the jacks as
an output jack only (for
monitoring or recording).
To video
output
To audio
output
To RF
output
1
To antenna input
CONNECTING OTHER EXTERNAL DEVICES
To video
output
To video
output
Camcorder
Camcorder
or
or
To audio
output
To audio
output
TV game
TV game
MENU
VIDEO AUDIO
IN
MENU
V
L/MONO
IN (VIDEO-2)
R
Headphones
Headphones
Illustration of AV-21YT11
Illustration of AV-21YN11
Note: Use headphones with a
stereo mini jack. When
using headphones, the
speaker sound output is
disabled.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
C O N N E C T I O N S
CONNECTING OTHER EXTERNAL DEVICES
Illustration of AV-21YT11
Note: When connecting mon-
aural audio to the TV,
use the L/MONO jack.
Note: The sound and picture
that you are watching
are output from VIDEO/
AUDIO (L/R) output
jacks on the rear panel.
To audio
input
To video
input
To video
output
To audio
output
VCR (for playing)
VCR (for recording)
Illustration of AV-21YN11
Note: The front and rear AU-
DIO/VIDEO input jacks
are directly connected
so that input to either
jack is output through
both. You cannot pro-
vide input to both the
front and rear jacks at
the same time.
To audio
input
To video
input
To video
output
To audio
output
Disconnect one input, or
use one of the jacks as
an output jack only (for
monitoring or recording).
VCR (for playing)
VCR (for recording)
Download from Www.Somanuals.com. All Manuals Search And Download.
6
G E T T I N G
S T A R T E D
REMOTE CONTROLS
RM-C373GY
RM-C372GY
CHANGING THE BATTERIES
Be sure to use only size AA/R6/UM-3 batteries.
Raise the latch on the remote's back cover to
remove it.
1
Insert the two supplied batteries, carefully notice the
“+” and “–” markings on the batteries and remote
control. To avoid a short circuit, insert “–” end first.
2
Snap the cover back into place.
3
❒If the remote control acts erratically, replace the bat-
teries. Typical battery life is usually about six months
to one year.
❒We recommend that you use the supplied batteries
initially and replace them as soon as operation
becomes erratic.
The supplied batteries are for testing, not regular use.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
G E T T I N G
S T A R T E D
POWER
❒ Press the Power button (
) on the TV front panel. The Power lamp will light red.
❒ If the TV will not be turned on even if you press the POWER button, the TV is in the stand-by
mode. Press the POWER button on the remote control to turn on the TV.
❒ To turn the power off, press the POWER button on the remote control. The Power lamp will light
red.
❒ The ON-TIMER lamp will light when the On/Off Timer is set, even when the TV power is off.
❒ When you do not use the television for a long period of time, turn the power off by pressing the
Power button (
) on the TV front panel. The Power lamp will go out.
❒ There are two methods to turn the power on after turning it off by pressing the POWER button on the
remote control or by using the On/Off Timer function:
1) Press the POWER button on the remote control.
2) Press the CHANNEL n button or CHANNEL , button on the TV front panel.
❒ When the On-Timer function is set, the On-Timer lamp will light. Even if you turn the power off
by pressing the POWER button on the remote control, if the On-Timer function is active the On-
Timer lamp stays lit. See page 13 to set On/Off Timer.
ADJUSTING VOLUME
Press the VOLUME button on the front panel or remote control. The volume level bar will ap-
pear.
1
VOLUME 13
||||||| -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Press the MUTING button to instantly turn the volume off to zero. To restore the volume to your
previous level, simply press the MUTING button again.
2
CHANGING CHANNELS
10 key direct access.
1
Press the numbers on the remote’s 10 key pad. For single-digit channel numbers press 0 then the
number. For channels above 100, press the 100+ button plus the 2-digit number.
Channel M.
2
Press the
n
CHANNEL , button, it will scan the channels in order.
❒ NOTE: After you operate the Auto Tuner Setup (page 10), all of the blank or empty, channels
will be removed from scanning so that there is no noise or channel snow when you scan, only
active channels.
Return.
3
Press the release of the RETURN + button to return to the previous channel. First, select a channel
(game #1). Then, select another channel (game #2) with the 10 key pad and push the RETURN+
button to flip directly back and forth.
Return <.
4
Press and hold down the RETURN + button for three seconds. The message, “RETURN CHAN-
NEL PROGRAMMED !” will appear and you can scan as you wish with the
n
CHANNEL , button.
Press RETURN + button again and you will go back to the Return+ channel you programmed.
To cancel the Return + channel, press and hold down the RETURN + button for another three
seconds and the message, “RETURN CHANNEL CANCELED !” appears.
❒ Pressing any number key or turning the TV off will also cancel a Return+ channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
G E T T I N G S T A R T E D
SETUP TOUR
When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is displayed.
Follow the instructions on the on-screen display to perform the SETUP TOUR.
❒In case of resetting that the reason for such as removal, you can set the SETUP TOUR function
on the menu. For datails, see page 10.
Press the Main power button on the TV.
1
The POWER lamp or POWER/ON TIMER
lamp lights. After the JVC logo has been
displayed, the TV automatically switches
to the language setting mode.
SETUP TOUR
SETUP TOUR
LANGUAGE
ENGLISH
Press the MENU
buttons to select
2
3
the on-screen language.
NEXT
Press the MENU button.
SETUP TOUR
SET CLOCK
- - : - -
The SET CLOCK screen will appear.
To set the hour (AM/PM)
To move to minutes
To set the minutes
To move to START CLOCK when
done with settings
START CLOCK
SETUP TOUR
TUNER MODE
CABLE
Press the MENU
the clock.
buttons to start
4
The TUNER MODE screen will appear.
To choose CABLE or AIR
To move to NEXT
NEXT
SETUP TOUR
NOW PROGRAMMING !
The AUTO PROGRAMMING function will
start and the indicator blinks.
333
333
01
❒To stop the AUTO PROGRAMMING function,
press the MENU
buttons.
SETUP TOUR
When all the TV channels that can be
received on your TV have been preset, the
display goes out and the AUTO
PROGRAMMING function operation is
completed.
THANK YOU!
SET IS NOW COMPLETE
Download from Www.Somanuals.com. All Manuals Search And Download.
9
U S I N G T H E M E N U
INITIAL SETUP ITEMS
USING THIS GUIDE:
AUTO TUNER SETUP
NOISE MUTING
BACKGROUND
Throughout this guide there are certain symbols
we use as shorthand to show you what to do.
When you see them, keep these factors in mind:
ON OFF
BLACK CLEAR
CLOSED CAPTION
Up and down arrows mean press the
MENU UP or MENU DOWN buttons. Pressing
the up or down buttons allows you to:
•Move vertically in the main menu screen
•Move through a submenu, or
•Move to the next letter, number, or other
choice in a submenu, or
LANGUAGE
POR SPA ENG
SETUP TOUR
SELECT
OPERATE
BY
BY
EXIT BY
EXIT
ꢀꢁ
PICTURE SETTINGS
TINT
-------------||-------------
-------------||-------------
-------------||-------------
-------------||-------------
-------------||-------------
•Back up to correct an error
COLOR
PICTURE
BRIGHT
DETAIL
Left and right arrows mean press the
MENU LEFT or MENU RIGHT button to:
• Select the highlighted item, or
• Select the options in a submenu
SELECT
OPERATE
BY
BY
EXIT BY
EXIT
The “Press Button” means you should
press that button on the remote control
ꢀꢁ
SOUND SETTINGS
(AV-21YT11/AV-20NT11/AV-14FT11 Only)
❒
Important information, or a note, about a
feature follows a cube like this one.
BASS
-------------||-------------
-------------||-------------
-------------||-------------
SMALL CAPITAL LETTERS are used when we
refer to buttons … this is important
because some menu functions have the
same name.
TREBLE
BALANCE
MTS
STEREO
SAP
MONO
↑
ON AIR
SELECT
OPERATE
BY
EXIT BY
EXIT
THE ONSCREEN MENUS:
BY
To bring up the onscreen menu, press any of
the 4-way cursor control (MENU) buttons on the
remote, and the menu will appear on the screen.
The item that appears yellow is the selected item.
When you use the menu buttons, the Picture
Settings menu will appear first. However, since
Initial Setup is so important, this guide begins
here.
ꢀꢁ
GENERAL ITEMS
SET CLOCK
ON/OFF TIMER
CHANNEL SUMMARY
SET LOCK CODE
CHILD LOCK
ON OFF
SELECT
OPERATE
BY
EXIT BY
EXIT
BY
❒If you use the Menu button on the
TV’s front panel, an additional menu
indicating the current channel and
the TV/Video status will appear
before the picture settings screen.
❒In the Picture screens menu, the
"Tint" option only appears if the TV
signal is NTSC.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
I N I T I A L S E T U P
AUTO TUNER SETUP
During Auto Tuner Setup, the TV will
automatically scan through all avail-
able channels and memorize the
active ones so that when you scan,
you do not pick up weak or noisy
channels.
CLOSED CAPTION
NOTE:
If they are included in a program, you
can view closed captions or text infor-
mation.
During Initial
Setup, the TV will
be programmed to
only receive active
channels. Once
the channels are
activated by the
Auto Tuner Setup
they will be
To CLOSED CAPTION
To operate and select a caption
or text channel
To AUTO TUNER SETUP
To operate
CAPTION: CC1 CC2 CC3 CC4
included in Scan.
Some weak
TEXT
: T1
T2 T3
T4
FINISH
channels may be
included or
TUNER MODE
:
CABLE AIR
omitted during this
procedure. You
can add or delete
any channels for
scanning in the
Channel
To FINISH
START
To save settings
EXIT when finished
To choose CABLE or AIR
To move to START
Summary, page
14.
Note: Captions are usually found on
CC1 and text on T1. The other
caption and text channels are
workable but are for future
purposes.
Note: See page 16 for complete
details on how to access
captioning with the CLOSED
CAPTION button.
To start Auto Tuner Setup
NOW
PROGRAMMING !
333
333
08
The Programming takes approximately
1 to 2 minutes
LANGUAGE
Choose from English, Portuguese, or
Spanish on-screen menus and dis-
plays.
PROGRAMMING OVER!
Note: Noise Muting will not work
while Auto Tuner Setup is
working.
To LANGUAGE
To activate
LANGUAGE
POR
SPA
ENG
BACKGROUND
Turn the background color of the
on-screens to black or clear.
Exit when finished
NOISE MUTING
Eliminates noise from channels that are
not broadcasting or are too weak.
To BACKGROUND
To operate
BACKGROUND BLACK CLEAR
To NOISE MUTING
To turn ON/OFF
Exit when finished
Exit when finished
Note: Noise Muting will not work when
you operate Auto Tuner Setup
or Channel Summary.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
P I C T U R E S E T T I N G S
TINT (NTSC ONLY)
BRIGHT
NOTE:
Tint allows you to adjust the levels of
red and green in the picture. The tint
option appears only when the TV color
system is NTSC.
Adjust the degree of light and dark in
the picture.
To exit the Picture
Settings menu,
press the Exit
button at any
time.
To BRIGHT
To lighten the picture
To darken the picture
To move to the next or previous
To TINT
To accentuate green
To accentuate red
To move to the next or previous
DETAIL
Detail allows you to adjust the level of
detail within the picture.
COLOR
Color allows you to adjust both the
vividness and subtlety of the color.
To DETAIL
To make the picture sharper
To make the picture smoother
To move to the next or previous
To COLOR
To make colors more vivid
To subdue colors
To move to the next or previous
PICTURE
Picture allows you to adjust the range
between black and white in the pic-
ture.
To PICTURE
To increase contrast
To decrease contrast
To move to the next or previous
Download from Www.Somanuals.com. All Manuals Search And Download.
12
S O U N D S E T T I N G S
MTS (Multi-Channel
Television Sound)
MTS technology gives you a choice
among stereo, mono, and Second
Audio Programs (SAP).
BASS
NOTES:
The Bass level adjustment feature
allows you to increase or decrease the
level of lower frequencies in the TV’s
sound.
STEREO MODEL
ONLY!!
Bass, Treble,
Balance, and MTS
are available on:
To MTS
To BASS
• AV-21YT11
• AV-20NT11
• AV-14FT11
MTS has no effect
on normal sound
broadcasts.
To emphasize bass
To reduce bass
To move to next
MTS
STEREO SAP MONO
ON AIR
ON AIR
Select the mode
TREBLE
(The ON AIR arrow tells you if
the current signal contains
Stereo or SAP)
The Treble level adjustment feature
allows you to increase or decrease the
level of higher frequencies in the TV’s
sound.
Note: Keep the TV in STEREO mode
to get the fullest sound quality.
To TREBLE
Note: SAP will allow you to hear an
alternative soundtrack, if avail-
able.
To increase treble
To decrease treble
To move to next
Note: Choose MONO to reduce
excess noise in a program or
channel.
BALANCE
The Balance adjustment feature
allows you to center the TV’s sound to
your needs.
To BALANCE
To shift the speaker balance to
the right
To shift the speaker balance to
the left
To move to next
Some Sound Advice
You can tell if a program is broadcast in stereo by the position of the ON AIR arrow in the MTS
menu. Unfortunately, it is common for some cable companies to squash the transmission of
stereo programs to mono because they only have mono equipment. If connected to a cable
system, the sound is at the mercy of that cable company — if they broadcast in mono, you
receive mono sound regardless of the original stereo programming.
Fortunately, most programs that are broadcast in stereo are aired on the major television
networks. If you connect your TV to an antenna instead of cable, and set the tuner mode in the
Auto Tuner Setup to “Air” instead of “Cable,” you will be able to pick up stereo broadcasts in
stereo.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
G E N E R A L I T E M S
SET CLOCK
ON/OFF TIMER
The Clock is the heart of all timer
functions. You must set the clock
before any timer functions will work.
Use the On/Off Timer as an alarm to
wake up, as a program reminder, or as
a decoy when you’re out of the house.
To SET CLOCK
To operate
To ON/OFF TIMER
To operate
ON TIME
12 : 00 AM
1 : 00 AM
07
TIME
12:34
AM
OFF TIME
CHANNEL
MODE
START CLOCK
ONCE EVERYDAY
YES NO
ON/OFF TIMER
FINISH
To set the hour (AM/PM)
To move to minutes
To set the minutes
To set the hour (AM/PM) you
want the TV to turn on
To move to minutes
To set the minutes
To move to START CLOCK when
done with settings
To set ON TIME and to move to
OFF TIME (set time for TV to turn
off)
To start the clock
THANK YOU !!
To move to CHANNEL
To select channel
If you want to synchronize the TV
clock with another clock or time signal,
press Left or Right Menu arrow at the
appropriate time, and the clock will start.
To move to MODE
Choose ONCE or EVERYDAY
To ON/OFF TIMER
Choose YES for on, NO for off
To FINISH
Note: If the TV is unplugged or you
experience a power outage,
you must reset the clock in
order for any of your timer
functions to work.
To save settings
THANK YOU !!
CLOCK SET MESSAGE:
If you do not set the clock but attempt to
use a timer function anyway, you will get
the following message:
Note: In order for ON/OFF Timer to
work, the clock must be set.
After a power interruption it will
be cancelled.
PLEASE SET CLOCK FIRST !!
Note: ON/OFF Timer cannot be set to
locked or guarded channels.
TIME
––:–– ––
START CLOCK
Download from Www.Somanuals.com. All Manuals Search And Download.
14
G E N E R A L I T E M S
CHANNEL SUMMARY
CHANNEL GUARD - LOCK
NOTES:
You can add or delete channels from
the channel scanning. You can also
lock out any “unauthorized” viewers
from one or up to all 181 channels.
There are two
sections in
Channel
To CHANNEL SUMMARY
To operate
Summary.
To the Lock column
To move up and
down a column
(e.g. from
To CHANNEL SUMMARY
To operate
The access code zero (0) to
lock or unlock that channel
channel to
channel) use the
Channel m
button.
CH
01
02
03
04
05
ADD
: CH
ADD
X
–
–
X
ADD
X
X
X
X
X
–
–
–
–
–
:
:
:
:
:
06
07
08
09
10
–
You can manually set channels to
scan that were too weak to be picked
up during Auto Tuner Setup. (If you
have not performed the Auto Tuner
Setup described on page 10, do so
now.) Conversely, if a channel was too
weak to receive a good picture but
was picked up anyway, delete it by
removing the X.
To move from
item to item (e.g.
from channel
number to add to
lock) use the
arrow up/down
keys.
–
–
X
Use the Channel m button to go to any
other channel you want to lock
Noise Muting will
not work while
you operate the
Channel
Exit when finished
CHANNEL –/+ to select the channel
Summary.
CHANNEL GUARD MESSAGE:
CH
01
02
03
04
05
ADD
X
X
–
X
: CH
ADD
X
–
–
X
This message appears when a viewer
attempts to watch a guarded channel:
–
:
:
:
:
:
06
07
08
09
10
–
–
–
–
–
–
–
–
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
X
X
To the ADD column
NO. –––
To include or delete from scan
Exit when finished
To watch a channel you have locked,
enter the lock code using the 10 key
pad.
If the wrong lock code is entered, this
message will flash on the screen:
Note: Channels set to scan will be
marked with an X.
Note: Some cable systems experi-
ence interference from radio
frequencies on Cable Channel
95. If you like, you can delete
this channel from scanning by
removing the X.
INVALID LOCK CODE !
Download from Www.Somanuals.com. All Manuals Search And Download.
15
G E N E R A L I T E M S
SET LOCK CODE
CHILD LOCK
The Lock Code locks and unlocks
Channel Guard. Write this three digit
number down and keep it where
would-be viewers will not look for it!
You can disable the front control
buttons of the TV.
When this function is set to ON, the TV
can be operated using only the re-
mote control.
To SET LOCK CODE
To operate
To CHILD LOCK
To turn ON/OFF
Exit when finished
The padlock icon appears
Note: The Child Lock is canceled
when you turn the TV’s main
power off.
Zero (the access code is zero)
LOCK CODE
000
FINISH
To the first number place
To choose the number
To move to the next place
Continue to follow these directions for all
three numbers
To FINISH
To save settings and exit
Note: If you forget the Lock Code
you can set another one this
same way.
Note: After a power interruption you
must reset the lock code.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
B U T T O N F U N C T I O N S
DISPLAY
VIDEO STATUS
NOTE:
The Display screen shows the current
status of timers and inputs.
The Video Status button lets you
select the settings when you play a
game, watch a movie, or want to reset
to factory settings.
Please note that
if the clock,
SleepTimer, or
On/Off Timer are
not set, the initial
Display screen
will state “Clock
Not Set,” “Sleep
Timer Off,” and
“On/Off Timer
DISPLAY
07
NOW
SLEEP TIMER
ON/OFF TIMER
ON TIME
“STANDARD” resets the picture
settings to factory standard levels.
12:20 PM
OFF
EVERYDAY
7:00 PM
10:00 PM
“CINEMA” for a film-like look to video.
“GAME” enhances video graphics.
Off,” respectively.
OFF TIME
VIDEO STATUS
❑ The channel or AV input (Channel 07)
❑ Current time (12:20 PM)
❑ Sleep Timer status minutes remaining
(Off)
> CINEMA > GAME > STANDARD >
❑ On/Off Timer status (Everyday, on
at 7:00 PM, off at 10:00 PM)
❑ Each press of the Display button
changes the display mode:
SLEEP TIMER
Sleep Timer turns off the TV for you in
case you fall asleep. Program it to
work in intervals of 15 minutes up to
180 minutes.
> DISPLAY > TIME > CHANNEL > OFF
>
SLEEP TIMER
CLOSED CAPTION
View the closed captions or text when
included in a program.
0 15 30 45 60 75 90 105 120 135 150 165 180
<
SLEEP TIMER MESSAGE:
CLOSED CAPTION
20 seconds prior to the automatic
shut-off, this message will appear:
> CC
> TEXT
> OFF
>
GOOD NIGHT ! !
PUSH SLEEP TIMER BUTTON
TO EXTEND.
Note: To change caption or text
channels see page 10.
Note: To access a captioning option
or to turn one off, allow the
display to remain on screen
until it disappears. In a few
seconds the captions will start.
Note: CC2, CC3, CC4, T2, T3, and T4
are functional, however, they
are for future purposes.
Note: If a large black box covers
80% of your screen, the Text
Mode is probably set. Press
CLOSED CAPTION to turn it off.
You then have 20 seconds to press the
SLEEP TIMER button to delay turn off for
another 15 minutes.
HYPER SURROUND
AV-21YT11/AV-20NT11/AV-14FT11
ONLY.
Creates a deep, 3-dimensional sound
effect by channeling the sound
through the TV’s front firing speakers.
HYPER SURROUND
Download from Www.Somanuals.com. All Manuals Search And Download.
17
B U T T O N F U N C T I O N S
TV / VIDEO
NUMBER BUTTONS
10 KEY PAD
Press two of the number buttons to move
to single and double digit channels.
TV/Video selects the input mode.
TV/VIDEO
AV-21YN11/AV-20NN11/AV-14FN11
To move to Channel 7:
TV
VIDEO
>
>
>
0 (zero)
AV-21YT11/AV-20NT11/AV-14FT11
TV
VIDEO-1
VIDEO-2
>
>
>
>
7 (seven)
100 + BUTTON
The 100+ button accesses all chan-
nels above Channel 99.
VIDEO-1: The video signal input to
the input terminal on the
rear panel is selected.
VIDEO-2: The video signal input to
the input terminal on the
To move to Channel 124:
100+
front panel is selected.
2 (two)
4 (four)
COLOR SYSTEM
The color system is automatically
selected, but if the picture not clear or
no color appears, select the color
system manually.
MUTING
The MUTING button turns the sound off
completely when you press it.
COLOR SYSTEM
MUTING
AUTO
PAL-M
PAL-N
NTSC
>
>
>
>
>
The sound will turn off
completely.
Note: To return the original volume
press the MUTING button again.
MENU BUTTONS
The MENU buttons allow you to control
the options located in the menu
screens. A complete discussion on
these buttons and on the menu system
is located on page 9.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
B U T T O N F U N C T I O N S
RETURN+
PICTURE BOOSTER
There are two kinds of Return.
When the picture is unclear because
the reception level of the TV signal is
low, activating the Picture Booster
improves the picture clarity in some
situations.
Return+ — Set a “Return Channel” to
return to after scanning with CHANNEL
m.
RETURN+ and hold for 3 seconds
PICTURE BOOSTER
> OFF
> HIGH
> LOW
>
RETURN CHANNEL
PROGRAMMED !
OFF: The Picture Booster off.
HIGH: The Picture Booster is function-
ing at maximum.
LOW: The Picture Booster is function-
ing at minimum.
Scan with CHANNEL m
RETURN+
Note: To cancel a Return channel,
press and hold the RETURN+
button for another 3 seconds until
“Return Channel Canceled !”
appears.
Note: If the picture becomes abnor-
mal when you set the Picture
Booster to HIGH, then set it to
LOW or OFF.
Return — Return to the last channel
viewed after moving to another chan-
nel via the 10 key pad.
RETURN+
Move to another channel with the
10 key pad.
RETURN+
Download from Www.Somanuals.com. All Manuals Search And Download.
19
T R O U B L E S H O O T I N G
PROBLEMS
CHECK
There is no power • See if the power cord became unplugged.
• Perhaps you have experienced a blown circuit breaker or fuse or a power outage.
There is no picture • The antenna could be disconnected.
or no sound
• The input mode (TV or Video) could not be set properly, refer to page 17.
• The tuner mode (in the Auto Tuner Setup) could be set improperly, refer to page 10.
• The station may be having difficulties, check to see if other channels are operating
normally.
Remote control is • Check that the batteries are still working and properly installed.
not operating or • Make sure there are no objects blocking a clear path from the remote to the TV.
operating properly • Maybe you are too far from the TV, you must be within 7m.
You cannot select • Make sure the channels are programmed. See Channel Summary, page 14.
a certain channel • Perhaps the channel is locked, select it with the 10 key pad and follow instructions,
on page 14.
The power turns off • Perhaps the On/Off Timer is set, press the POWER button, check page 13.
by itself
• The power was interrupted or the power cord unplugged. Reset the clock, check page 13.
• The Sleep Timer may be set.
The clock is wrong • The power was interrupted and the clock not reset. Reset the clock, check page 13.
On Timer lamp is • There is a problem with the TV. Unplug the set and call for service.
blinking
PICTURE
CHECK
The picture color • Tint and color may be improperly adjusted. Check page 11.
quality is poor
• Video Status mode may be set to an inappropriate setting. Check page 16.
There are lines
across the picture
• There could be interference from another energy consuming appliance, such as a
computer, another TV or VCR. Move any other such appliances farther away from
the TV.
The picture is
spotted
• There could be interference from a running high wattage appliance such as a hair-dryer,
vacuum cleaner, or neon sign. You will have to move the antenna away from the source
of the interference or change it to a coaxial cable which is less prone to interference.
Double picture
(Ghosts)
• A building or airplane can reflect the original signal producing a second, delayed
one. Adjust the antenna position.
Snowy picture/
Image noise
• The antenna may be damaged, disconnected or turned. Check the antenna con-
nection, page 3 and page 4. If it is damaged, you will have to replace it.
Screen is 80% black • Closed Caption Text Mode in on. Press the CLOSED CAPTION button until you select
Off.
SOUND
CHECK
Bilingualorstereoprograms • Make sure the MTS mode is properly set. Refer to page 12 for details on setting
can not beheard
MTS Modes.
NOT A PROBLEM
DON’T WORRY ABOUT THIS, IT’S NORMAL
Static electricity • It is normal to feel a surge of static electricity if you brush over or touch the screen.
You hear occasional • It is normal for the TV to emit crackling sounds when turned on or off. Unless the
crackling sounds
sound or picture become abnormal, this is fine.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
S P E C I F I C A T I O N S
MODEL
AV-21YT11/AV-20NT11/AV-14FT11
AV-21YN11/AV-20NN11/AV-14FN11
Color systems
TV RF systems
Channels
PAL, NTSC
M, N
PAL, NTSC
M, N
VHF 2 to 13, VHF 14 to 69
VHF 2 to 13, VHF 14 to 69
Sub Mid, Super, Hyper and Ultra bands
Sub Mid, Super, Hyper and Ultra bands
Sound-multiplex MTSC (Multi-Channel Television Sound)
system
Audio output
(Rated power
output)
3 W + 3 W
3 W (monaural)
Speakers
AV-21YT11:
AV-21YN11:
(6 cm × 12 cm) oval × 2 (stereo)
(6 cm × 12 cm) oval × 2 (monaural)
AV-20NT11:
AV-20NN11:
(5 cm × 12 cm) oval × 2 (stereo)
(5 cm x 12 cm) oval x 2 (monaural)
AV-14FT11:
AV-14FN11:
(5 cm × 9 cm) oval × 2 (stereo)
(5 cm x 9 cm) oval x 2 (monaural)
External
input/output
VIDEO-1/VIDEO-2:
VIDEO input (RCA)
AUDIO L/R input (RCA)
VIDEO output (RCA)
AUDIO L/R output (RCA)
VIDEO input (RCA)
AUDIO input (RCA)
VIDEO output (RCA)
AUDIO output (RCA)
Headphone jack Stereo mini jack
(dia. 3.5 mm, sound is stereo)
Stereo mini jack
(dia. 3.5 mm, sound is monaural)
Accessories
Remote control unit; RM-C373GY × 1
AA/R6/UM-3 dry cell battery × 2
Indoor antenna × 1
Remote control unit; RM-C372GY × 1
AA/R6/UM-3 dry cell battery × 2
Indoor antenna × 1
Matching adaptor × 1
Matching adaptor × 1
Design and specifications subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
|