COMPACT COMPONENT SYSTEM
COMPACT DISC PLAYER
XL-V130BK/XL-V230BK
XL-V130BK
XL-V130 COMPACT DISC PLAYER
STANDBY
OPEN
/
CLOSE
STOP/CLEAR
PLAY / PAUSE
/
/
STANDBY/ON
1
6
2
7
3
8
4
9
5
PROGRAM
RANDOM
REPEAT
CANCEL
10
+10
P
E
M
D
D
CONVERTER CONVERTER
Pulse Edge Modulation Differential Linearity Errorless D/A Converter
XL-V230BK
CANCEL RANDOM
PROGRAM
OPEN
/
1
4
8
2
5
9
3
6
CLOSE
7
'
10
+10
XL-V230 COMPACT DISC PLAYER
STANDBY
OPEN
/
CLOSE
STOP/CLEAR
PLAY PAUSE
/
SEARCH
AUTO SEARCH
INDEX
/
CHECK
/
/
STANDBY/ON
REPEAT DISPLAY
ALL
/
1
MODE
1
6
2
3
4
9
5
COMPACT
DIGITAL AUDIO
RM-SX230EU REMOTE CONTROL
PROGRAM
RANDOM
REPEAT
CANCEL
7
8
10
+10
P
E
M
D
D
CONVERTER CONVERTER
Pulse Edge Modulation Differential Linearity Errorless D/A Converter
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LET0029-001A
[BS]
Download from Www.Somanuals.com. All Manuals Search And Download.
We would like to thank you for purchasing one of our JVC
products.
Before connecting this unit to the wall outlet, please read
the instructions carefully to ensure that you obtain the
best possible performance.
Table of contents
INTRODUCTION................................................ 1
Precautions .................................................................1
About this manual .......................................................1
Names of buttons........................................................2
If you have any questions, please consult your JVC
dealer.
BEFORE USING FOR THE FIRST TIME .......... 4
Installing the unit .........................................................4
Connecting to other equipments ................................4
Supplying the power .................................................. 5
To connect the AC power cord of the main unit ............ 5
Installing the batteries.................................................6
To install the batteries in the remote control unit ........... 6
COMPU LINK connection...................................................... 6
BASIC OPERATIONS ....................................... 7
Basic functions for disc playback...............................7
Turning on the power of this unit .................................... 7
Loading a disc in the disc tray ....................................... 7
Remote control operation ............................................... 7
Playing a disc ................................................................. 8
Stopping playback ......................................................... 8
Locating a point to start playback ..............................8
Skipping to a desired track ............................................ 8
Skipping to a desired index ........................................... 8
Searching for a desired section ..................................... 9
Specifying a desired track ............................................. 9
Displaying the time .....................................................9
Switching the time display on XL-V230BK ..................... 9
Displaying the time on XL-V130BK ................................ 9
VARIOUS PLAYBACK PATTERNS ............... 10
Playing tracks in a desired order .............................. 10
Playing tracks in a random order.............................. 10
Playing repeatedly .................................................... 11
Repeating whole disc................................................... 11
Repeating one track ..................................................... 11
GENERAL INFORMATIONS ........................... 12
COMPU LINK remote control system ....................... 12
Care and handling .................................................... 13
Troubleshooting ........................................................ 14
Specifications............................................................ 15
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Precautions
About this manual
This manual covers the operating instructions for the compact disc
player XL-V130BK and XL-V230BK.
Load compact disc only
Never insert anything other than a compact disc into any part of the
There are several functions which require separate instructions for
eachmodel. Pleasecheckthemodelnumberstatedonthecartonbox,
and follow the descriptions applicable to your unit.
player.
If a problem persists
If something goes wrong, turn off the power immediately. If the same
problem reoccurs when the power is turned on once more, turn off the
power again and consult your JVC dealer.
This manual is organized as follows:
The first part, “INTRODUCTION”, gives you the precautions when
using this unit, and shows you the names of buttons on the main unit
and the remote control unit.
Handling the power cord
When unplugging from the wall socket, always pull the plug body,
never the power cable.
The second part, “BEFORE USING FOR THE FIRST TIME”, tells you
what kind of operations you should do before playing a disc. This part
describes where to place the unit for best results, how to install
batteries in the remote control unit and how to connect this unit to the
amplifier/receiver and other components.
Volume settings
A CD player has almost zero background noise. Because of this, the
technique of listening to the background level and then setting the
volume before the music starts, as used with analog turntables or tape
decks, cannot be used. If you raise the volume level too high, speaker
damage may result.
The third part, “BASIC OPERATIONS”, describes how to load a disc,
and convenient basic functions for playing disc.
Condensation
The CD player uses optical components. If it is moved from a cold
location to a warm one, or is used in a room subject to excessive
humidity or where a fire has just been lit, condensation could form on
the optical components.
This may prevent the laser beam from being properly transmitted and
thus causes noise or even a malfunction.
If condensation has formed and the CD player does not function
correctly, we recommend that you leave it turned on for an hour or two.
If at the end of this time the CD player still does not function properly,
please consult your JVC dealer.
The fourth part, “VARIOUS PLAYBACK PATTERNS”, describes vari-
ous functions for playing disc, and convenient functions for recording.
The fifth part, “GENERAL INFORMATIONS”, describes the COMPU
LINK remote control system which facilitates various operations be-
tween JVC components, and explains how to take care of discs.
This part also includes “Troubleshooting” which tells you how to check
the unit when a malfunction occurs, and the technical informations
regarding this unit.
Transporting the unit
When carrying this unit, it is best to avoid either tilting it or turning it
upside-down. Where you cannot avoid doing so, please remove the
disc first.
Using compact discs
Compact discs are made of plastic and can be easily damaged. If the
disc is dirty, scratched, warped or otherwise damaged, the digital
information may not be picked up correctly.
Applicable discs
This unit can only be used with compact discs bearing the mark below.
Never use discs of other types.
'
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Names of buttons
Main unit
4 ¢ AUTO SEARCH/CHECK buttons
22 33 SEARCH buttons
: (STANDBY ON) button
3/8 PLAY/PAUSE
button
STANDBY
indicator
0 OPEN/CLOSE button
Disc tray
7 STOP/CLEAR
button
XL-V230 COMPACT DISC PLAYER
STANDBY
PLAY / PAUSE
OPEN
/
CLOSE
STOP/CLEAR
/
/
STANDBY/ON
1
6
2
7
3
8
4
5
PROGRAM
RANDOM
REPEAT
CANCEL
9
10
+10
P
E
M
D
D
CONVERTER CONVERTER
Pulse Edge Modulation Differential Linearity Errorless D/A Converter
remote sensor
(XL-V230BK Only)
Display window
Numeric keypad
CANCEL button
REPEAT button
RANDOM button
random play back button
PROGRAM button
AC power cord inlet
OUTPUT jacks
COMPULINK-3
(SYNCHRO)
OUTPUT
AC POWER CORD
LEFT
RIGHT
COMPULINK-3(SYNCHRO)jacks
Page 2
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Remote control unit (XL-V230BK only)
Remote control signal
transmitter
CANCEL button
RANDOM: random
playback button
CANCEL RANDOM
PROGRAM
PROGRAM button
: STANDBY/ON button
OPEN/CLOSE button
OPEN /
CLOSE
1
4
8
2
5
9
3
6
7
Numeric keypad
10
+10
8: Pause button
3: Play button
7: Stop button
SEARCH
AUTO SEARCH / CHECK
INDEX
1/¡ SEARCH buttons
REPEAT ALL/1 button
4/¢ AUTO SEARCH/CHECK buttons
ø/Ø INDEX buttons
REPEAT DISPLAY
ALL / 1
MODE
DISPLAY MODE:
switching time dis-
play button
COMPACT
DIGITAL AUDIO
RM-SX230EU REMOTE CONTROL
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING FOR THE FIRST TIME
Connecting to other
equipments
Installing the unit
Connecting to an amplifier or receiver allows you to listen to the sound
from the speakers.
Connect the OUTPUT jacks of this unit to the line input jacks of an
amplifier or receiver with the supplied audio cord.
Best location
Select a location which is level, dry and neither too cold nor too hot
(temperature range 5°C (41°F) to 35°C (95°F)). Also, avoid dusty
locations or any location subject to vibration.
Notes
÷
If interference occurs
Never connect the OUTPUT jacks to the PHONO jacks of the
amplifier or receiver. This may cause damage to the components.
Make sure that the same channels are connected between this unit
and the amplifier or receiver: LEFT to LEFT and RIGHT to RIGHT.
Do not connect the power plug until all connections are complete.
Connect the plugs firmly. Loose connections may cause noise or
malfunction.
If this equipment is placed near a tuner or a radio receiver tuned to AM
frequencies, interference may occur. If this happens, we recommend
either that you move this unit as far away as possible from the tuner or
receiver or briefly turn off the power to this unit.
÷
÷
÷
Rear panel of this unit
COMPULINK-3
SYNCHRO
OUTPUT
LEFT
AC POWER CORD
RIGHT
Amplifier or receiver
Audio cord
OUTPUT
LEFT
RIGHT
Speaker unit
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING FOR THE FIRST TIME
Supplying the power
To connect the AC power cord of the
main unit
The AC power cord is supplied separately and must be connected to
the unit.
Plug the AC power cord into the AC POWER CORD inlet of this unit and
connect to the wall outlet after all connections are complete.
Note
When using the COMPU LINK Remote Control System, do not connect
the power cord to the SWITCHED AC OUTLET of an amplifier or
receiver.
AC power cord inlet
Rear panel of this unit
COMPULINK-3
(SYNCHRO)
OUTPUT
AC POWER CORD
LEFT
RIGHT
Supplied AC power
cord
To the wall outlet
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING FOR THE FIRST TIME
COMPU LINK connection
Installing the batteries
(XL-V230BK Only)
JVC’s COMPU LINK Remote Control System provides unified control
over system components connected with COMPU LINK. Connecting
JVC audio components with the COMPU LINK jacks automatically
controls relative operations between components and facilitates vari-
ous operations. With the COMPU LINK connection to an amplifier or
receiver, you can operate XL-V130BK/XL-V230BK with the amplifier or
receiver’s remote control unit. Synchronized recording is also avail-
able with this feature.
To install the batteries in the remote
control unit
Before operating the remote control unit, install two batteries.
1. Remove the rear cover of the remote control unit by pressing
down and simultaneously pulling it backwards.
Connecting the COMPU LINK cord
The COMPU LINK-3 SYNCHRO jacks are used to output and input the
control signal for the COMPU LINK remote control system.
COMPULINK-compatibleproductsareprovidedwiththejacksmarked
COMPU LINK-1, COMPU LINK-2 or COMPU LINK-3, referring to the
COMPU LINK version. XL-V130BK/XL-V230BK is equipped with
COMPU LINK-3. You can connect XL-V130BK/XL-V230BK also to a
component with a lower COMPU LINK versions. But, in that case, only
the lower versions’ features will be available.
PlugthesuppliedCOMPULINKcordintotheCOMPULINK-3SYNCHRO
jack on the rear panel of XL-V130BK/XL-V230BK. Plug the other end
into the COMPU LINK jack of the other component. If there are two
COMPU LINK jacks, plug it into either of them.
2. Install batteries. Be sure that the batteries are installed with
correct polarity, (+) and (–).
ConnectingtheCOMPULINKsystemcomponentswiththeCOMPU
LINK cords
Supplied COMPU LINK cord
3. Attach the rear cover by sliding it back into position.
Cassette deck
Turntable
CD player
Amplifier or receiver
Notes
Incorrect use of batteries can cause corrosion or damage. Note the
following points to lengthen battery life.
÷
÷
÷
Install batteries observing the correct polarity, (+) and (–).
Do not use new and old batteries simultaneously.
Batteries with similar shapes may have different voltage ratings. Be
sure to use the correct batteries.
÷
÷
Remove batteries from the remote control unit if it will not be used
for a long period of time.
Do not expose batteries to heat or flame.
Battery replacement
Service life of batteries depends on the condition of use; standard life
is about one year. When the batteries become weak, the operating
distance of the remote control unit becomes short . If this happens,
replace the batteries R03(UM-4)/AAA(24F) with new ones.
Note
÷
The lower the temperature, the shorter the battery life.
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Basic functions for disc
playback
Turning on the power of this unit
Loading a disc in the disc tray
Press the
(STANDBY/ON) button to turn on this unit. The
Use the 0 OPEN/CLOSE button to open and close the disc tray.
STANDBY indicator is turned off and the display is turned on.
Remote control unit
(XL-V230BK ONLY)
Main unit
Remote control unit
(XL-V230BK ONLY)
Main unit
OPEN/CLOSE
OPEN/
CLOSE
STANDBY
0
STANBY/ON
1. Open the disc tray by pressing the 0 OPEN/CLOSE button.
Press again to turn the power off and activate the standby mode. The
STANDBY indicator is lit.
2. Place a disc on the disc tray according to the groove with its
label side up.
The power is automatically turned on also by;
3. Close the disc tray by pressing the 0 OPEN/CLOSE button.
÷
÷
Pressing the 0 OPEN/CLOSE button.
Pressing the 3 button on the remote control unit or the 3/8 PLAY/
PAUSE button on the main unit.
Note
÷
Whenloadingadiscinthedisctray, besuretoputthediscaccording
to the groove. Otherwise, the disc will be damaged when the disc
tray is closed, and the disc cannot be removed from the unit.
Notes
÷
A small amount of power (4 watts) is consumed even in the standby
mode.
Good
No Good
÷
Toturnthepoweroffcompletely, disconnectthepowercordfromthe
wall outlet.
Compact disc
Disc tray
Main unit
Remote control operation (XL-V230BK Only)
Point the remote control unit towards the remote sensor and operate it
steadily and carefully. The remote control unit can be used within a
rangeofabout7meters(23feet)fromtheremotesensor, andatangles
of up to about 30 degrees.
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Locating a point to start
playback
Skipping to a desired track
Playing a disc
Use the 4/¢ buttons.
Press the 3 button on the remote control unit or the 3/8 PLAY/
PAUSE button on the main unit.
Remote control unit
Main unit
(XL-V230BK ONLY)
Main unit
Remote control unit
(XL-V230BK ONLY)
AUTO SEARCH/CHECK
PLAY/PAUSE
4
¢
6
To skip back to the beginning of the track being played, tap the 4
button. Whenthebeginningofthetrackisreached, tappingthisbutton
again skips to the previous track.
The 3 indicator lights on the display and playback starts.
When no disc is loaded in the unit, the disc tray opens.
To skip to the next track, tap the ¢ button.
When using the 4 ¢ buttons on the main unit, tap them until the
desired track appears.
To stop playback temporarily, press the 8 button on the remote control
unit or the 3/8 PLAY/PAUSE button on the main unit.
The 8 indicator lights on the display and playback stops temporarily.
To resume playback, press the 3 button on the remote control unit or
the 3/8 PLAY/PAUSE button on the main unit.
Skipping to a desired index (XL-V230BK Only)
Stopping playback
(for a disc with INDEX)
Press the 7 button.
Use the ø/Ø INDEX buttons.
Main unit
Remote control unit
(XL-V230BK ONLY)
Remote control unit
STOP/CLEAR
INDEX
ø
Ø
To skip back to the beginning of the index being played, tap the ø
INDEX button. When the beginning of the index is reached, tapping
this button again skips to the previous index.
To skip to the next index, tap the Ø INDEX button.
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Displaying the time
Swithching the time display on XL-V230BK
Searching for a desired section
Each time the DISPLAY MODE button is pressed, the time display
changes as the following.
Keep the 1/¡ SEARCH buttons on the remote control unit or
the 22 /33 SEARCH buttons on the main unit pressed during
playback.
Remote control unit
DISPLAY
Remote control unit
(XL-V230BK ONLY)
SEARCH
Main unit
1
¡
MO
EACH = EACH REMAIN = TOTAL
TOTAL REMAIN
=
The corresponding indicator lights in each time mode.
EACH: Shows the elapsed time of the track being played.
EACHREMAIN:Showstheremainingplaybacktimeofthetrackbeing
played.
TOTAL: Shows the total playing time of the disc being played.
TOTALREMAIN:Showstheremainingplaybacktimeofthediscbeing
played.
Playback advances or reverses rapidly.
While the 1 button is kept pressed, playback rapidly reverses
toward the beginning of the track. While the ¡ button is kept
pressed, playback rapidly advances toward the end of the track.
When the desired section is reached, release the button. The player
resumes normal playback from that point.
Note
Two speeds are available for fast forward and fast backward.
Pressing and holding the button provides the faster speed.
Displaying the time on XL-V130BK
The XL-V130BK has the following time displays.
Specifying a desired track
EACH: Shows the elapsed time of the track being played.
EACHREMAIN:Showstheremainingplaybacktimeofthetrackbeing
played.
To specify the desired track number, use the numeric keypad (1-
10, +10).
Remote control unit
TOTAL: Shows the total playing time of the disc being played.
Main unit
1
(XL-V230BK ONLY)
1
4
8
2
5
9
3
2
7
3
8
4
9
5
6
10
+10
6
7
10
+10
The unit searches for the selected track and playback starts automati-
cally.
When selecting track number 10 or less, press the corresponding
numeric button. When selecting track number 11 or above, use the
[+10] button.
Example: To select track number 12, press [+10] and then [2].
To select track number 25, press [+10] twice and then [5].
To select track number 30, press [+10] twice and then [10].
Note
The track number which does not exist on the selected disc, cannot be
selected.
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS PLAYBACK PATTERNS
Playing tracks in a
desired order
Playing tracks in a
random order
You can select and play tracks in a random order.
Selections are made so that each track in the disc is played only
once.
You can play only the favorite tracks in any desired order.
CANCEL
PROGRAM
RANDOM
main unit
Numeric keypad
3 PLAY
RANDAM
PLAY
3
PROGRAM
main unit
XL-V230 COMPACT DISC PLAYER
STANDBY
OPEN
/
CLOSE
STOP/CLEAR
PLAY / PAUSE
/
/
STANDBY/ON
1. Press the RANDOM button so that the "RANDOM" indicator
lights on the display.
1
6
2
7
3
8
4
9
5
PROGRAM
RANDOM
REPEAT
CANCEL
10
+10
P
E
M
D
D
CONVERTER CONVERTER
Pulse Edge Modulation Differential Linearity Errorless D/A Converter
÷
To skip to the track to be played next, press the ¢ button.
Numeric keypad
To exit random playback
CANCEL
Press the stop button,and the random mode is cancelled.
1. In stop mode, press the PRAGRAM button so that "PRGM"
lights on the display.
2. Select the track number with the numeric keypad.
Refer to “Specifying a desired track” on page 9 for entering the
track number.
The selected track number is programmed and the following
display appears.
Display shows the track
number selected for step 1.
STEP
TOTAL
PRGM
9
÷
If you want to cancel the displayed program step, press the
CANCEL button and then enter the new track number.
3. Repeat step 2 for other tracks to be programmed.
You can program up to 32 tracks.
4. Start playback by pressing the 3 button.
The programmed tracks are played in the programmed order.
÷
÷
You can skip to a desired program step with the4 or ¢ button.
You can add tracks in the program during the playback.
To check the program contents
Press the 4 or ¢ button during stop mode. Each time the 4 or
¢ button is pressed, the program contents are displayed in the
programmed order or the reverse order.
To clear the entire program
In stop mode, press the 7 STOP/CLEAR button on the main unit. The
program contents will be cleared, however, the program mode is not
canceled.
To exit program mode
Press the PROGRAM button again, and the program mode is can-
Page 10
celled.
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS PLAYBACK PATTERNS
Playing repeatedly
You can repeatedly play the whole disc or one track.
It is also possible to utilize this function in combination with
random/program playback function.
main unit
REPEAT
REPEAT ALL/1
Repeating whole disc
Press the REPEAT (ALL/1) button so that the REPEAT indicator
lights on the display.
All tracks are played repeatedly.
Repeating one track
Press the REPEAT (ALL/1) button so that the REPEAT 1 indicator
lights on the display.
The displayed track is played repeatedly.
To cancel repeat mode
Press the REPEAT (ALL/1) button so that the REPEAT and REPEAT 1
indicators go out.
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATIONS
COMPU LINK remote
control system
The COMPU LINK Remote Control System controls relative
operations between components automatically and facilitates
various operations.
Automatic source selection
When the supplied COMPU LINK cord is utilized to connect this unit to
others equipped with COMPU LINK jacks, switching-in of each system
component can be performed with a single touch on the source
selector button located on a JVC amplifier or receiver.
Whenselectioniscarriedoutinthismanner, thecorrespondingunitwill
automatically start operation.
This is a system originated and developed by JVC for facilitating
various system operations.
Upon pressing of the play button, the source selector of the amplifier
or receiver changes automatically. When a new unit is switched in, the
previously selected component stops operation within five seconds.
The following is a brief explanation of this system:
Synchronized recording
Synchronized recording refers to the process in which a JVC cassette
deck starts recording, synchronized with this unit. Synchronized
recording is carried out as follows:
1. Set the cassette deck to the recording pause mode in accordance
with its instructions.
2. To record only certain tracks, program the tracks in any order, as
desired.
3. Press the 3/8 PLAY/ PAUSE button on the front panel of this unit.
The cassette deck automatically starts recording, synchronized
with this unit.
Notes
÷
÷
÷
÷
Synchronized recording stops automatically when this unit stops
playback.
To cancel synchronized recording, press the 7STOP button of this
unit or the cassette deck.
To properly operate the synchronized recording, the buttons/con-
trols other than POWER, 7 STOP and OPEN do not function.
If the recording pause mode is set on the cassette deck by pressing
the 8 PAUSE button after pressing the ¶ REC and 3 PLAY buttons
simultaneously, synchronized recording is not possible. For details,
refer to the instructions for the cassette deck.
Automatic power on/off function
This function is to control the power on/off of the receiver/amplifier or
this unit respectively as the following.
÷
÷
When this unit enters playback mode, the power of the receiver or
amplifier is turned on.
When the source selector of the receiver/amplifier is set to CD
function mode, the power of this unit is turned on.
Notes
÷
Abnormaloperationmayresultifthepowersupplyofthecomponent(s)
is interrupted. If this happens, you must start over again.
Ensure that the COMPU LINK jacks of the each component are
connected with the supplied COMPU LINK cord. Also, be sure to
fully read the instructions for each component.
÷
÷
When the power of the amplifier or receiver is switched off, this unit
is also turned off automatically.
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATIONS
Care and handling
Maintenance of discs
How to handle CDs
When there are fingerprints or other dirt adhering to a disc, wipe the
disc with a soft, dry cloth with a movement going from the inside
outwards.
If difficult to clean, wipe the disc with a cloth moistened with water.
Never use record cleaners, petrol, alcohol or any anti-static agents.
When handling compact discs, do not touch the surface of the disc (re-
flective silver side - the side without the label).
Since compact discs are made of plastic, they are easily damaged. If
the disc gets dirty, dusty, scratched or warped, the sound will not be
picked up correctly and, in addition, such discs may cause the CD
player to malfunction.
Even on label side
Do not damage the label side, stick paper to or use any adhesive on
this surface.
Storage
Make sure that discs are kept in their cases. If discs are piled one on
top of another without their protective cases, they can be damaged.
Do not put discs in any location where they can be exposed to direct
sunlight - or in any place where humidity or temperature is high. Avoid
leaving discs in your car!
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATIONS
Troubleshooting
What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.
Symptom
Possible cause
Remedy
The unit is not operative.
Power plug is disconnected from the AC
outlet.
Connect the plug to an AC outlet.
The AC power cord plug is disconnected
from the AC power cord inlet of this unit.
Connect the plug to an AC power
cord inlet.
Disc is not loaded.
Load a disc in the disc tray.
Replace both batteries.
Remove the obstacle.
The remote control unit does not function.
(XL-V230BK only)
Batteries are exhausted.
There is an obstacle between remote control
unit and the remote sensor of the main unit.
Direct sunlight shines on the remote sensor
of the main unit.
Shade the unit from the direct sunlight.
Disc is inserted upside down.
Disc is not loaded in the correct position.
Moisture is condensed inside the unit.
Disc is dirty.
Load a disc with its label-side up in the
disc tray.
Playback is not possible.
Load the disc according to the groove of
the disc tray.
Leave the unit turned on until the mois-
ture evaporates.
Wipe off the disc surface with a soft
cloth.
The reproduced sound includes noise.
The sound is intermittent.
Disc is warped.
Replace the disc with a new one.
Replace the disc with a new one.
Disc is scratched.
Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATIONS
Specifications
General
System:
Compact disc player
Signal detection system: Non-contact optical system
Sampling frequency:
Power requirements
Power consumption:
44.1 kHz
AC 230 V , 50Hz
10watts (POWER ON)
4 watts (STANDBY)
435 x 101 x 281 mm
3.3 kg
Dimensions (W x H x D):
Mass:
Audio performance
Frequency response:
Dynamic range:
2 Hz to 20,000 Hz (±1 dB)
More than 98 dB (at 1 kHz)
More than 106 dB
Signal to noise ratio:
Total harmonic distortion: Less than 0.0025% (at 1 kHz)
Channel separation:
Wow and flutter:
Output level
More than 94 dB (at 1 kHz)
Less than measurable limit
2.0Vrms (at 10 kohms)
Accessories
Remote control unit (RM-SX230EU)(XL-V230BK only) .............. 1
Battery R03(UM-4)/AAA(24F) (XL-V230BK only) ....................... 2
Audio cord ................................................................................. 1
COMPU LINK cord .................................................................... 1
AC POWER cord ....................................................................... 1
Design and specifications subject to change without notice.
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
0397YMYMACJSC
J
C
EN
V
Download from Www.Somanuals.com. All Manuals Search And Download.
|