JVC CD Player XL MC2000BK User Manual

COMPACT COMPONENT SYSTEM  
COMPACT DISC AUTOMATIC CHANGER  
XL-MC2000BK  
XL-MC2000 COMPACT DISC AUTOMATIC CHANGER  
OPEN/CLOSE  
STOP/CLEAR  
PLAY/PAUSE  
EXCHANGE  
RANDOM  
INTRO  
REPEAT  
PLAY MODE MEMORY  
DISC/TRACK  
CALL  
CANCEL  
POWER  
OPEN/  
200  
CONTINUE ONE DISC PROGRAM CLOSE  
RANDOM INTRO REPEAT EXCHANGE  
DOWN  
UP  
STANDBY  
DISC  
3
TRACK  
1
5
9
2
4
8
6
0
POWER  
200  
OPTICAL DIGITAL OUTPUT  
7
CALL CANCEL  
MEMORY  
DISC EJECT  
DISC  
TRACK  
'
ENHANCED COMPULINK CONTROL SYSTEM  
1  
DISC  
+1  
DISC  
RM-SXLMC2000JR REMOTE CONTROL  
'
INSTRUCTIONS  
For Customer Use:  
E
n
t
e
h
o
r b  
re  
f t  
tu  
e
lo
w
th
e
M
od  
e
th  
ta  
l
N
e
o
. a  
th  
n
d
S
eri  
to  
al  
N
o
io
o
r
n
.
w
h
ic  
a
h
l
o
c
a
t
e
d
o
R
n
r
e
a
r,  
nf  
b
o
t
a
m
si  
d
r
e
e
e
c
a
b
in  
e
t
.
e
in  
i
s
i
o
r
m
t
f
o
f
u
r
e
r
f
e
ren  
c
e
.
Model No.  
Serial No.  
LVT0359-001B  
[ J ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
CONTENTS  
Thank you very much for purchasing the JVC product. We sincerely  
hope it proves its quality and performance to your full satisfaction.  
Please read the instructions contained in this manual in order to get  
the most of the product’s capability and performance. If there are  
any questions concerning the product, please consult your JVC  
dealer .  
Precautions ........................................................ 2  
Installation ................................................................................. 2  
Compact discs ........................................................................... 2  
Operation ................................................................................... 2  
Setting Up .......................................................... 3  
Connecting the unit ................................................................... 3  
Installing batteries in the remote control .................................. 4  
Feature of XL-MC2000  
• This component is designed to store up to 200 compact discs,  
change and play them automatically in three different playback  
modes.  
• This component features a digital optical output jack for direct  
digital audio transmission to an MD, CD-R, amplifier or  
receiver.  
Control Panel and Remote Control................. 5  
Control panel ............................................................................. 5  
Display....................................................................................... 6  
Remote control .......................................................................... 6  
Basic Operation ................................................ 7  
Turning the power on ................................................................ 7  
Loading compact discs .............................................................. 7  
Unloading/changing discs ......................................................... 7  
Playing discs .............................................................................. 8  
CONTINUE Mode Playback ........................... 9  
Basic mode ................................................................................ 9  
Playing discs in random order .................................................. 9  
Playing a track repeatedly ......................................................... 9  
Playing only the beginning of each disc's first track................ 9  
ONE DISC Mode Playback ........................... 10  
Basic mode .............................................................................. 10  
Playing the tracks in random order ......................................... 10  
Playing the disc repeatedly ..................................................... 10  
Playing a track repeatedly ....................................................... 10  
Playing only the beginning of each disc's first track.............. 10  
PROGRAM Mode Playback.......................... 11  
Basic mode .............................................................................. 11  
Playing program steps in random order.................................. 11  
Playing the program repeatedly .............................................. 12  
Playing a program step repeatedly.......................................... 12  
CompuLink-3 Remote Control System ........ 12  
Handling and Taking Care of Discs .............. 13  
Handling compact discs .......................................................... 13  
Cleaning compact discs........................................................... 13  
Storing compact discs ............................................................. 13  
Specifications & Packing List ........................ 13  
Troubleshooting .............................................. 14  
1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRECAUTIONS  
Installation  
• Select the best location  
Select a level location to install this component, where it is free  
from extremes of temperature (5 to 35°C, or 41 to 95°F),  
humidity, dust, or vibration.  
If noise interference is caused during AM broadcast reception  
by a tuner/receiver located nearby, relocate it or this component,  
or turn off either one.  
• Moving the unit  
Before moving the unit, first remove all the discs. Turn the power  
off, making sure the standby indicator is lit. Then remove the  
AC power cord from the AC outlet.  
Compact discs  
• Use only compact digital audio discs  
Only the audio compact discs identified by  
the logo shown on the right can be used with  
this component.  
'
Operation  
• Keep the disc storage free of obstacles  
Do not put anything other than discs in slots of the disc storage.  
• Turn the power off if a problem occurs  
If an unusual condition arises, turn the power off immediately. If  
the condition persists whenever the power is turned on, consult  
your JVC dealer.  
• Do not pull the AC power cord  
Do not pull the cable when unplugging the AC cord from the  
wall socket or this component — hold and pull the plug body.  
• Set the sound volume carefully  
Be careful in setting the sound volume on your amplifier/receiver  
when playing a CD, which has almost none of background noise  
unlike analog records and tapes. Find out the right setting starting  
with a low level setting. Setting the level too high and starting a  
CD could damage the speakers.  
• Protect the component against condensation  
Condensation inside the component could disrupt the proper  
transmission of the disc-reading laser beam, causing noise or  
malfunction. If condensation ever ensues due to excessive  
humidity or sudden temperature change, leave the component  
turned on for a couple of hours to dry up — consult your JVC  
dealer if this does not correct the condition.  
2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING UP  
System control connections  
Connecting the unit  
This compact disc changer/player needs to be connected to an  
If you are connecting the unit to a JVC audio component using the  
CompuLink-3 remote control system, connect the units with the  
accessory CompuLink cord. Either one of the COMPULINK-3  
(SYNCHRO) jacks in the back of this unit can be used.  
amplifier/receiver for audio reproduction.  
CAUTION  
Do not connect the AC power cord until all other neces-  
sary connections have been made.  
CompuLink cord  
COMPULINK-3  
(SYNCHRO)  
Analog audio connections  
First connect the OUTPUT jacks in the back of this unit with the  
CD or AUX input jacks of the amplifier/receiver using the accessory  
audio cord. Be sure to insert the audio cord plugs firmly into the  
proper jacks matching the output and input channels — RIGHT to  
RIGHT and LEFT to LEFT.  
To CompuLink jack  
When you use this system, you can remote-control this CD unit  
from the connected JVC amplifier/receiver. (See Page 12 for more  
information.)  
Audio cord  
NOTE: JVC components equipped with two COMPULINK-3  
(SYNCHRO) ports can be connected in series; a com-  
ponent with only one jack may only be connected at  
the end of the series.  
OUTPUT  
LEFT  
(White)  
RIGHT  
(Red)  
Power connection  
To input audio jack of  
the amplifier/receiver  
Connect the accessory AC power cord into the socket in the back  
of this unit. Then insert the plugs into an AC outlet. (Do not connect  
the power cord to a switched AC outlet of a component if the  
CompuLink system is used.)  
Digital audio connections  
If the MD, CD-R, amplifier or receiver you are making connections  
to has a digital optical input jack, connect the DIGITAL OUT  
OPTICAL jack in the back of this unit to the CD or AUX digital  
input jack on the MD, CD-R, amplifier or receiver using a  
commercially available optical fiber cable.  
DIGITAL OUT  
Optical fiber cable  
(not supplied)  
OPTICAL  
AC power cord  
Wall outlet  
To digital input jack  
of the MD/CD-R/amplifier/  
receiver  
Be sure to pull off the caps before you make any connections, as  
shown above. Place the caps in a safe place.  
3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing batteries in the remote  
control  
1. Remove the rear cover  
of the remote control unit.  
2. Install batteries. Be sure that  
the batteries are installed with  
correct polarity, (+) and (-).  
3. Attach the rear cover.  
CAUTION  
• Install the batteries with their polarities correctly set.  
• Remove the batteries if the remote control is not  
going to be used for an extended period of time.  
• Do not expose the remote control to heat, flame, or  
direct sunlight.  
Replacing the batteries  
The service life of batteries normally lasts for about one year though  
it is dependent on the use of the remote control (it is shortened in  
low temperatures, too). Replace the batteries any time if the  
controllable range is reduced (max. range: 7 meters or 23 feet and  
30 degrees away from the component).  
CAUTION  
• Be sure to replace them with the correct batteries (1.5V,  
R6P, AA).  
• Do not use new and old batteries in combination.  
4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROL PANEL AND REMOTE CONTROL  
Alphabetic letters in brackets following button names indicate their  
counterparts on the remote control.  
Control panel  
4
5
6
XL-MC2000 COMPACT DISC AUTOMATIC CHANGER  
OPEN/CLOSE  
STOP/CLEAR  
PLAY/PAUSE  
EXCHANGE  
RANDOM  
INTRO  
15  
16  
2
7
8
9
REPEAT  
PLAY MODE MEMORY  
CALL  
CANCEL  
10  
11  
12  
13  
14  
3
DISC/TRACK  
DOWN  
UP  
STANDBY  
POWER  
17  
200  
OPTICAL DIGITAL OUTPUT  
1
DISC EJECT  
DISC  
TRACK  
'
ENHANCED COMPULINK CONTROL SYSTEM  
18  
19  
20  
a
c
1
11  
b
d
POWER button [  
]
PLAY MODE button [  
,
,
]
Turns the power on and off. The STANDBY indicator above  
lights when the power is turned off and the unit is in the standby  
state; it goes out when the power is turned on. (To turn off the  
unit completely, unplug the power cord from the wall socket.)  
Selects in turn a mode of playing successive discs continuously  
(CONTINUE), one disc only (ONE DISC), or according to a  
program (PROGRAM). Refer to the description of each  
playback mode for details.  
o
2
3
4
12  
13  
14  
Display  
MEMORY button [  
]
Shows the current operation status (see next page for more  
information).  
Enters specified disc and track numbers as a program step in  
the PROGRAM mode.  
m
Disc storage  
Holds up to 200 discs in slots of a carousel, which rotates inside  
the disc storage.  
CALL button [  
]
Displays the programmed steps for review or deletion in the  
PROGRAM mode.  
e
n
OPEN/CLOSE button [  
]
CANCEL button [  
]
Opens or closes the disc storage door. The disc in the play  
position will be retracted into its carousel slot when the door is  
opened using this button.  
Deletes the currently displayed program step (disc and track  
numbers) in the PROGRAM mode.  
s
u
15  
16  
17  
(track skip/search backward) button [  
,
]
5
6
p
STOP/CLEAR button [  
]
Skip tracks or search for a track backward. Holding down this  
Stops playing the disc. Pressing the button in the PROGRAM  
mode clears all program steps if the unit is stopped.  
button causes playback to fast reverse.  
v
t
,
(track skip/search forward) button [  
]
q
r
PLAY/PAUSE button [  
,
]
Skip tracks or search for a track forward. Holding down this  
button causes playback to fast forward.  
Retrieves a disc from its carousel slot, places it in the play  
position, and starts playing the disc; or interrupts the playing  
temporarily, or restarts the interrupted playing.  
DISC/TRACK jog dial  
Used to select a disc or track — the DISC or TRACK button  
located below the dial determines the dial function. “JOG” and  
“DISC” or “TRACK” will be shown on the display when the  
function is selected.  
7
i
EXCHANGE button [  
]
Opens the disc storage door without retracting the disc currently  
in the play position, and permits to change discs in the slots  
positioned in the front.  
18  
DISC EJECT button  
Raises the disc in the load/unload position of the disc storage  
8
9
f
RANDOM button [  
]
Selects or deselects the RANDOM playback function (see the  
description of playback modes).  
when the door is open.  
Pressing this button when the door is closed retrieves the disc  
from the play position and brings it to the load/unload position.  
The disc will then be popped up when the door is opened.  
g
INTRO button [  
]
Selects or deselects the INTRO playback function (see the  
19  
20  
j
description of playback modes).  
DISC button [  
]
Selects the DISC/TRACK jog dial function for discs.  
10  
h
REPEAT button [  
]
k
Selects or deselects the REPEAT or REPEAT 1 playback  
TRACK button [  
]
function (see the description of playback modes).  
Selects the DISC/TRACK jog dial function for tracks.  
5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
a
b
1
POWER button [  
]
Display  
CONTINUE button  
Directly selects the mode of playing successive discs  
continuously — instead of selecting the CONTINUE mode  
using the PLAY MODE button  
The information shown on the display of the control panel includes:  
current playback mode, function, disc (slot) and track numbers,  
program step number, track and total playing times, jog dial  
function, operation status, and track number table. The display with  
all elements shown is illustrated below:  
11  
on the front panel.  
c
d
e
ONE DISC button  
Directly selects the mode of playing one disc only — instead  
of selecting the ONE DISC mode using the PLAY MODE button  
11  
on the front panel.  
PROGRAM button  
Directly selects the mode of playing discs and tracks according  
to a program — instead of selecting the PROGRAM mode using  
the PLAY MODE button  
11  
on the front panel.  
4
OPEN/CLOSE button [  
]
The track number table shows the tracks selected for the currently  
selected/displayed disc. When a track is specified as the starting  
track, all track numbers following the specified track will be shown.  
The track number display is available only up to 20, however.  
f
g
h
i
8
RANDOM button [  
]
9
INTRO button [  
REPEAT button [  
]
10  
]
7
EXCHANGE button [  
]
j
19  
DISC button [  
]
Remote control  
Numbers in brackets following button names indicate their  
20  
k
l
TRACK button [  
]
Numeric buttons (0 through 9)  
Used to specify a disc or track number.  
counterparts on the control panel.  
m
n
13  
CALL button [  
]
14  
CANCEL button [  
]
o
12  
MEMORY button [  
]
POWER  
a
200  
p
5
d
(stop) button [  
]
c
OPEN/  
CONTINUE ONE DISC PROGRAM  
CLOSE  
e
h
b
g
Stops playing the disc. Pressing the button in the PROGRAM  
mode clears all program steps if the unit is stopped.  
RANDOM INTRO REPEAT EXCHANGE  
f
k
j
i
l
q
r
(pause) button  
DISC  
3
TRACK  
1
5
9
2
Temporarily interrupts the playing of the disc.  
4
8
6
0
(play) button  
7
Starts playing the disc, or restarts the interrupted playing.  
s
t
n
(search reverse) button  
Search through a track in reverse.  
CALL CANCEL  
MEMORY  
m
q
o
p
t
r
(search forward) button  
Searches through a track forward.  
u
s
v
w
u
v
(track skip backward) button  
1 DISC  
+1 DISC  
x
Skips tracks backward.  
(track skip forward) button  
RM-SXLMC2000JR REMOTE CONTROL  
Skips tracks forward.  
w
x
– 1 DISC (disc skip backward) button  
Skips discs backward.  
+ 1 DISC (disc skip forward) button  
Skips discs forward.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
3. Place the disc in a slot, with its label facing to the left.  
Turning the power on  
Check that the standby indicator on the control panel is lit. Then  
press the POWER button either on the control panel or remote  
control.  
PLAY/PAUSE  
STOP/CLEAR  
OPEN/CLOSE  
INTRO  
RANDOM  
EXCHANGE  
REPEAT  
CANCEL  
CALL  
MEMORY  
PLAY MODE  
ACK  
DISC/TR  
BY  
ND  
ACK  
STA  
R
WE  
PO  
STANDBY  
'
ENHANCED COMPULINK CONTROL SYSTEM  
POWER  
POWER  
CD Label  
or  
CAUTION  
• Do not put anything except CDs in the storage area.  
• 8 cm CDs cannot be played back in this unit.  
• Be careful not to touch the playback mechanism in the  
unit.  
(Remote control)  
• Up to 25 discs can be accessed at one time. Trying to  
insert or remove a disc which is not in the loading area  
may result in damage to the discs and unit.  
• The disc needs to be placed vertically in the storage slot  
of this component. After taking the disc out of its case,  
grip the rim of the disc between your thumb and middle  
finger — be sure to keep the fingers on the narrow, outer-  
most strip where the surface is solidly bright.  
• Do not try to put more than one disc in a single slot. The  
unit will be damaged.  
To turn the power off, press the button again lighting the standby  
indicator.  
NOTE: Keeping the unit in the standby state consumes a mini-  
mal 6.5 watts. If necessary, unplug the power cord from  
the wall socket to turn off the power completely.  
Loading compact discs  
Also see Page 13 for the manner of handling and taking care of  
compact discs.  
4. Repeat step 3, or steps 2 and 3, to load additional discs in the  
storage. Up to 200 discs can be loaded.  
1. Press the OPEN/CLOSE button either on the control panel or  
remote control, opening the disc storage door and exposing  
carousel slots. “d-OP” is shown in the display.  
5. When all necessary discs have been loaded, press the OPEN/  
CLOSE button to close the storage door. “d-CL” is shown in  
the display.  
OPEN/CLOSE  
OPEN/  
CLOSE  
CAUTION  
or  
Make sure to remove your hand from the storage opening  
before pressing the OPEN/CLOSE button.  
(Remote control)  
2. To select a specific slot to load a disc, press the DISC button  
and turn the DISC/TRACK jog dial, to specify the required  
slot number, which is shown as “DISC” number on the display.  
The carousel rotates to bring the specified slot to the load/unload  
position, which is in the center of the storage area.  
Unloading/changing discs  
1. Press the OPEN/CLOSE button to eject a disc in the playback  
position for unloading or changing.  
2. To unload or change discs in other slots, press the DISC button  
and specify the slot number using the jog dial. The specified  
disc will be brought to the load/unload position. Then press the  
DISC EJECT button to raise the disc up.  
DISC  
Repeat this step to unload or change any additional discs.  
3. When unloading or changing is completed, press the OPEN/  
CLOSE button to close the door. The disc in the load/unload  
position at this time will then be shifted to the play position.  
7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Interrupting the playback  
Playing discs  
1 Selecting a playback mode  
There are three main playback modes, namely CONTINUE, ONE  
DISC, and PROGRAM; each has selective playback functions. (See  
the following pages for the description of the playback modes and  
functions.)  
Press the PLAY/PAUSE button or the button on the remote  
control to temporarily interrupt the playing, which can be resumed  
by pressing the PLAY/PAUSE button or the button on the remote  
control.  
PLAY/PAUSE  
or  
Select the mode using the PLAY MODE button on the control panel,  
or the CONTINUE, ONE DISC, or PROGRAM button on the  
(Remote control)  
remote controller.  
• Skipping to the different track in the same disc  
during playback  
PLAY MODE  
Proceed to steps 3 and 4. Press  
or  
buttons to skip tracks  
respectively.  
• Skipping to the begining of the different disc  
during playback  
Proceed to steps 2, then press PLAY/PAUSE button on the front  
2 Selecting a disc to play  
To select a disc for playing, press the DISC button and then use the  
DISC/TRACK jog dial, or use the 1 DISC or + 1 DISC buttons or  
numeric buttons on the remote control, showing the DISC (slot)  
number on the display.  
panel or the  
button on the remote control.  
• Skipping to a track in the different disc during  
playback  
Proceed to steps 2 to 4.  
DISC  
DISC  
or  
NOTE: When “JOG” is shown in the display, the  
button acts  
as the ENTER function and the pause function is dis-  
abled.  
(Remote control)  
• Changing discs during playback  
NOTE: When you use the numeric buttons to specify the disc  
or track numbers, press the button in the order of larger  
digit. For example, press “5,then “2” for “52. Press  
“1,4,and then “8” for “148.”  
The carousel slots positioned in the front behind the disc storage  
door are accessible for loading, unloading, or changing discs while  
a disc is being played. Press the EXCHANGE button to open the  
door. Press the EXCHANGE or OPEN/CLOSE button to close the  
door.  
EXCHANGE  
EXCHANGE  
3 Selecting a track  
To select a track of the selected disc, from which the disc is to be  
played instead of starting from the beginning, press the TRACK  
or  
(Remote control)  
button and then use the DISC/TRACK jog dial,  
or  
buttons  
CAUTION  
or use the numeric buttons on the remote control, showing the  
required TRACK number on the display.  
• Insert or remove discs very carefully at this time — the  
slots other than the center one are radially slanted to-  
ward the center of the carousel. Never try to rotate the  
carousel forcibly — it cannot be rotated when a disc is  
being played.  
TRACK  
TRACK  
or  
• Do not insert a disc outside of the loading area.  
• A disc placed outside of the loading area is not regis-  
tered and playback will not start.  
(Remote control)  
• When you want to rotate the carousel, press the OPEN/  
CLOSE button after closing the disc storage door.  
• After loading/unloading discs, promptly close the disc  
storage door. Playback will not occur with the door is in  
the open position.  
4 Starting the disc  
Press the PLAY/PAUSE button or the  
disc or track.  
button to play the selected  
PLAY/PAUSE  
Stopping the playback  
Press the button to stop and cancel the playing.  
or  
(Remote control)  
NOTE: When “JOG” is shown in the display, the button acts  
as the CLEAR button and the stop function is disabled.  
NOTE: • If the disc storage door is open when playback starts,  
the door closes automatically.  
STOP/CLEAR  
• After specifying the disc to be played and pressing  
the TRACK button, playback will begin automatically.  
• Once disc playback is started, in order to specify a  
track number to be played, the PLAY/PAUSE button  
or  
(Remote control)  
or the  
button on the remote control must be  
8  
pressed within five seconds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTINUE MODE PLAYBACK  
Every loaded disc can be played entirely in the numerical order in  
the CONTINUE mode. After the playback of the last disc ends,  
the playback begins again from the first disc.  
Playing discs in random order  
To play every disc in the storage in random order, press the  
RANDOM button showing “RANDOM” on the display. Then start  
the disc.  
Discs and tracks can be selected randomly from all the loaded discs  
and played (RANDOM function).  
Playback order is continuous and discs and tracks are randomly  
selected. There is an approximately fifteen second pause between  
tracks.  
One track can be played repeatedly in the basic mode as well as  
when the RANDOM function is selected (REPEAT-1 function).  
The beginning of the first track of every loaded disc can be played  
for 15 seconds (INTRO function).  
Press the RANDOM button again while playback is stopped to  
cancel the function, clearing the indication from the display.  
Basic mode  
1. Select the mode.  
Playing a track repeatedly  
A track of the selected disc can be played repeatedly. With a disc  
selected, press the REPEAT button, and select to show “REPEAT  
1” on the display. Then start the disc to play the selected track  
repeatedly until you stop it.  
Use the PLAY MODE button, or press the CONTINUE button  
on the remote control, to show “CONTINUE” on the display.  
PLAY MODE  
CONTINUE  
or  
This function can be used in the basic CONTINUE mode as well  
as when the RANDOM function is on.  
(Remote control)  
Press the REPEAT button once to cancel the function, clearing the  
indication from the display.  
2. Select a disc you want to start playing. The discs following the  
specified disc will be played in succession.  
NOTE: The REPEAT function is not available in the CON-  
TINUE mode, as all discs are already being played  
back continuously.  
Press the DISC button and then use the DISC/TRACK jog dial,  
or use the 1 DISC or + 1 DISC button or numeric buttons on  
the remote control.  
DISC  
Playing only the beginning of  
each disc's first track  
To scan the first tracks of all discs, press the INTRO button to  
show “INTRO” on the display and the  
part of the first track of each disc will be played for 15 seconds  
successively.  
button. The beginning  
3. Select the track if you want to start playing the disc from a  
specific track.  
Press the TRACK button and then use the DISC/TRACK jog  
Press the INTRO button again to cancel the function, clearing the  
indication from the display. This function will continue until the  
button is pressed.  
dial, or use the  
remote control.  
or  
button or numeric buttons on the  
4. Press the PLAY/PAUSE button or the  
control to start playing.  
button on the remote  
NOTE: If you press the TRACK button after a disc is speci-  
fied, playback starts automatically, however in order  
to play the specified track, you should press the  
button.  
5. Discs and tracks can be skipped forward or backward during  
the playback using the  
or  
buttons. The playback can  
be paused or stopped in the normal manner. For further  
information, see [BASIC OPERATION] on pages 7 and 8.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
ONE DISC MODE PLAYBACK  
One disc can be selected and played entirely in the ONE DISC  
mode. The starting track may be specified.  
Playing the tracks in random  
order  
Every track of the disc can be played once in a random order  
(RANDOM function).  
To play every track of the disc, which has been selected in Step 2,  
press the RANDOM button following Step 2, to show “RANDOM”  
The entire disc can be played repeatedly (REPEAT function) or  
one selected track can be played repeatedly (REPEAT-1 function)  
in the basic mode as well as when the RANDOM function is  
selected.  
on the display. Then press the PLAY/PAUSE button or  
button  
on the remote control. The playback will be stopped when all tracks  
have been played.  
Press the RANDOM button again to cancel the function, clearing  
the indication from the display during stop.  
The beginning part of every track of the disc can be played for 15  
seconds (INTRO function).  
Playing the disc repeatedly  
To repeatedly play the entire disc selected in Step 2 above, press  
the REPEAT button, and select and show “REPEAT” on the display.  
Then start the disc to play it repeatedly until stopped.  
Basic mode  
1. Select the mode.  
Use the PLAY MODE button, or press the ONE DISC button  
on the remote control, to show “ONE DISC” on the display.  
This function can be used in the basic ONE DISC mode as well as  
when the RANDOM function is effective.  
PLAY MODE  
ONE DISC  
or  
Press the REPEAT button twice to cancel the function, clearing the  
indication from the display.  
(Remote control)  
Playing a track repeatedly  
2. Select a disc you want to play.  
Press the DISC button and then use the DISC/TRACK jog dial.  
The –1 DISC or +1DISC buttons as well as the numeric buttons  
on the remote control can also be used.  
To repeatedly play the track selected in Step 3 above, press the  
REPEAT button, and select to show “REPEAT 1” on the display.  
Then start playing the disc to play the selected track repeatedly  
until stopped.  
DISC  
This function can be used in the basic ONE DISC mode as well as  
when the RANDOM function is effective.  
Press the REPEAT button once to cancel the function, clearing the  
indication from the display.  
3. Select the track if you want to start playing the disc from a  
specific track.  
Press the TRACK button and then use the DISC/TRACK jog  
Playing only the beginning of  
each disc's first track  
dial. The  
or  
buttons as well as the nemeric buttons on  
the remote control can also be used.  
TRACK  
To scan the tracks of the selected disc, press the INTRO button to  
show “INTRO” on the display and the  
button. The beginning  
part of each track will be played for 15 seconds, The playback will  
be stopped when the scan is completed.  
Press the INTRO button again to cancel the function, clearing the  
indication from the display.  
4. Press the PLAY/PAUSE button or the  
button on the remote  
control to start the disc, playing it from the first track or from  
the specified track through the last track.  
NOTE: If you press the TRACK button after a disc is speci-  
fied, playback starts automatically, however in order  
to play the specified track, you should press the  
button.  
5. Tracks can be skipped forward or backward during the playback  
using the  
or  
button. The playback can be paused or  
stopped in the normal manner. For further information, see  
[BASIC OPERATION] on pages 7 and 8.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROGRAM MODE PLAYBACK  
Discs and tracks can be selectively specified in a program and played  
according to the program in the PROGRAM mode.  
Reviewing the steps:  
Press the CALL button. One step is displayed each time the button  
is pressed.  
The steps in the program can be played in a random order  
(RANDOM function).  
Deleting a step:  
Press the CALL button and display the necessary step. Then press  
the CANCEL button.  
The entire program can be played repeatedly (REPEAT function)  
or one program step can be selected and played repeatedly  
(REPEAT-1 function) in the basic mode as well as when the  
RANDOM function is selected.  
Adding a step:  
An added step is placed in the last step automatically.  
Deleting all steps:  
Press the STOP/CLEAR button. The entire program will be cleared.  
Basic mode  
1. Select the mode.  
The program reviewing and modification procedures described  
above can only be performed when the playback is stopped.  
Use the PLAY MODE button, or press the PROGRAM button  
on the remote control, to show “PROGRAM” on the display.  
The program will be retained and available whenever the  
PROGRAM mode is selected again as long as the unit is kept in  
the standby state.  
PLAY MODE  
PROGRAM  
or  
If the AC power cord is disconnected from the outlet, the program  
will be erased.  
(Remote control)  
Playing program steps in random  
order  
2. Specify disc or track numbers in the order you want to play in  
the following manner:  
To play every step in the program once in random order, press the  
RANDOM button, showing “RANDOM” on the display. Then start  
playing.  
(a) Specify a disc number and a track number.  
Press the DISC or TRACK button and then use the DISC/  
TRACK jog dial. The – 1DISC or +1DISC buttons and the  
or  
buttons as well as the numeric buttons on the  
The playback will be stopped when all program steps have been  
played.  
remote control can also be used.  
DISC  
DISC  
If the disc specified in the program is not in the disc storage, the  
playback stops. The playback starts again after you load the disc  
or  
and press the PLAY/PAUSE button or the  
control.  
button on the remote  
(Remote control)  
The track number can be omitted when programming a  
whole disc to be played.  
Press the RANDOM button again to cancel the function, clearing  
the indication from the display during stop.  
Press the CANCEL button to cancel the specified disc and  
track numbers shown on the display.  
(b) Press the MEMORY button to register the specification as  
program step 1.  
MEMORY  
MEMORY  
or  
(Remote control)  
Up to 32 steps can be entered in one program. Each disc,  
when the whole disc is to be played, or each track  
programmed is counted as one step.  
(c) Repeat Steps (a) and (b) above to program additional the  
remaining steps.  
3. Press the PLAY/PAUSE button or the  
button on the remote  
control to start playing according to the program.  
11
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPULINK-3  
REMOTE CONTROL  
SYSTEM  
The CompuLink system, which is a JVC-developed remote control  
system, links JVC audio components to establish systematized  
operation control of the linked components.  
Playing the program repeatedly  
To repeat playback according to the program, press the REPEAT  
button, and select to show “REPEAT” on the display. Then start  
playing, which will be repeated until stopped.  
This function can be used in the basic PROGRAM mode as well as  
when the RANDOM function is effective.  
Press the REPEAT button twice to cancel the function, clearing the  
indication from the display during stop.  
NOTE: There are three versions of the CompuLink system:  
CompuLink-1, -2, and -3. Although they are basically  
compatible, some functions may not be available with  
the older versions (refer to the instructions manual of  
the component for the information).  
The CompuLink-3 Remote Control System provides the following  
functions:  
Playing a program step  
repeatedly  
Automatic power on/off  
Turning a linked component on or off will automatically turn the  
amplifier/receiver on or off.  
Selecting a source on the amplifier/receiver will turn on the relevant  
component.  
To repeatedly play a specific program step, select the step using  
or  
buttons during playback, press the REPEAT button  
twice to show “REPEAT 1” on the display. The selected step is  
played back repeatedly.  
This function can be used in the basic PROGRAM mode as well as  
when the RANDOM function is effective.  
Press the REPEAT button once to cancel the function, clearing the  
indication from the display.  
CAUTION  
• Be sure to use the accessory CompuLink cable for the  
connection.  
• The operation may be disrupted if the power supply to a  
component is interrupted, in which case turn off all linked  
components and turn them on again.  
Automatic source selection  
Selecting a source on the connected amplifier/receiver will  
automatically turn on the relevant component and start its operation.  
Starting a linked component will automatically select the relevant  
source on the amplifier/receiver.  
Synchronized recording  
This function is effective when a JVC cassette deck or MD recorder  
is linked in the CompuLink system, allowing simple, synchronized  
recording.  
NOTE: Refer to the instruction manual of your cassette deck  
or MD recorder for the detail of the synchronized re-  
cording.  
Some functions are disabled in order to prevent the  
recording trouble during the synchronized recording.  
12
Download from Www.Somanuals.com. All Manuals Search And Download.  
HANDING AND TAKING  
CARE OF DISCS  
SPECIFICATIONS &  
PACKING LIST  
General  
Readable discs:  
Handling compact discs  
CD  
Protect the disc from being scratched, warped, or damaged in any  
other way — the plastic disc can easily be damaged and the damaged  
disc disrupts sound reproduction and the player function.  
Other  
Power requirements:  
AC 120V  
, 60Hz  
Power consumption:  
11 W (POWER ON),  
6.5 W (STANDBY mode)  
7.8 kg (17.2 lbs)  
Keep every disc in its case  
Be sure to keep every disc in its case whenever it is taken out of the  
player. Placing one disc upon another without putting them in their  
cases will damage their recorded tracks.  
Mass:  
Dimensions (W x H x D):  
435 x 199.5 x 482.5 mm  
17-3/16 x 7-7/8 x 19 inch  
Keep the label side clean  
Do not attempt to put adhesive tape or paper nor write anything  
Audio output  
ANALOG OUT (pin jack  
x
2): 2.0 Vrms (1 kHz, 0dB)  
even on the label side of a disc.  
DIGITAL OUT  
(square optical connector jack): -24 -15dB  
The package contains the following items:  
Cleaning compact discs  
1
1
2
1
1
1
XL-MC2000 Compact Disc Automatic Changer  
RM-SXLMC2000JR Remote Control  
Remote control batteries (1.5V, R6P, AA)  
Instructions manual  
CD booklet file  
Audio cord  
If the underside of a disc is soiled with fingerprints, etc., use a  
piece of soft, dry cloth and wipe clean the surface from the inside  
to the outside in straight strokes. If that does not clean the surface,  
try with a piece of soft cloth moistened with water.  
Never use alcohol, record cleaners, or anti-static agents.  
1
1
CompuLink cord  
AC power cord  
Storing compact discs  
Do not store compact discs where they may be exposed to direct  
sunlight or extremes of temperature and humidity. Also, avoid  
leaving them in the car.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
What appears to be a malfunction may not always be serious and can easily be corrected. The table below describes some typical problems  
and their remedies. Check them before calling your JVC dealer.  
Symptom  
The CD is not played.  
Possible Cause  
The CD is not loaded.  
Remedy  
Load the disc.  
The CD is not placed in the slot with its  
label on the left side.  
Reload the disc correctly.  
A disc has been placed outside of the  
loading area  
Specify the slot number and open the disc  
storage door. Then close the door.  
The CD is damaged.  
Replace the disc with a new one.  
Connect the cord securely.  
The AC power cord is disconnected.  
The audio cord is disconnected.  
The CD is soiled.  
Connect the cord securely.  
The sound is intermittent or harsh.  
Clean the surface using a piece of soft cloth.  
Replace the disc with a new one.  
Remove it cleanly.  
The CD is scretched or warped.  
A piece of paper or adhesive tape is stuck  
to the CD surface.  
The audio cord is placed close to the AC  
powercord.  
Separate them.  
The remote controller does not  
properly work.  
The batteries are exhausted.  
Replace the batteries.  
The remote control is not properly used.  
The internal circuitry is not properly  
Its maximum range is 7 meters (23 feet) and  
30 degrees away from the component.  
The component does not operate.  
Disconnect the AC power cord and connect  
functioning due to static electricity or other it again.  
disturbance.  
14
Download from Www.Somanuals.com. All Manuals Search And Download.  
TO OUR VALUED CUSTOMER  
THANK YOU FOR PURCHASING THIS JVC PRODUCT.  
WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE.  
NEED HELP ON HOW TO HOOK UP?  
NEED ASSISTANCE ON HOW TO OPERATE?  
NEED TO LOCATE A JVC SERVICE CENTER?  
LIKE TO PURCHASE ACCESSORIES?  
IS HERE TO HELP!  
TOLL FREE: 1(800)252-5722  
Remember to retain your Bill of Sale for Warranty Service.  
Do not attempt to service the product yourself  
Caution  
To prevent electrical shock, do not open the cabinet.  
There are no user serviceable parts inside.  
Please refer to qualified service personnel for repairs.  
BT-51018-5  
15  
(
)
0306  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USA ONLY  
LIMITED WARRANTY  
1-1  
ONLY FOR PRODUCT PURCHASED IN U.S.A.  
JVC Americas Corp. (JVC) warrants this product and all parts thereof, except as set forth below ONLY TO THE  
ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of  
original purchase for the period shown below. ("The Warranty Period")  
PARTS  
LABOR  
1
YR  
1
YR  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND  
IN THE COMMONWEALTH OF PUERTO RICO.  
WHAT WE WILL DO:  
If this product is found to be defective within the warranty period, JVC will repair or replace defective parts with new or  
rebuilt equivalents at no charge to the original owner. Such repair and replacement services shall be rendered by JVC  
during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the  
remainder of the Warranty Period. All products may be brought to a JVC authorized service center on a carry-in basis.  
Color televisions with a screen size of 27" or greater qualify for in-home service. In such cases, a technician will come  
to your home and either repair the TV there or remove and return it if it cannot be repaired in your home.  
WHAT YOU MUST DO FOR WARRANTY SERVICE:  
Please do not return your product to the retailer  
Instead, return your product to the JVC authorized service center nearest you. If shipping the product to the service  
center, please be sure to package it carefully, preferably in the original packaging, and include a brief description of  
the problem(s). Please call 1-800-252-5722 to locate the nearest JVC authorized service center. Service locations  
representative will require clear access to the product.  
If you have any questions concerning your JVC Product, please contact our Customer Care Center at 800-252-5722  
WHAT IS NOT COVERED:  
This limited warranty provided by JVC does not cover:  
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty  
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by  
JVC to render such service, or if affixed to any attachment not provided with the products, or if the model or serial  
number has been altered, tampered with, defaced or removed;  
2. Initial installation, installation and removal from cabinets or mounting systems.  
3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning;  
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;  
5. Signal reception problems and failures due to line power surge;  
6. User Removal Memory Devices/Video Pick-up Tubes/CCD Image Sensors are covered for 90 days from the date of purchase;  
7. Accessories;  
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);  
9. Products used for commercial purposes, including, but not limited to rental.  
10. Loss of data resultant from malfunction of hard drive or other data storage device;  
There are no express warranties except as listed above.  
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS  
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.  
JVC SHALL NOT BE LIABLE FOR ANY LOSS OF USE OF THE PRODUCT, INCONVIENCE, OR ANY OTHER  
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTAL (INCLUDING, WITHOUT LIMITATION,  
DAMAGE TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT  
OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE  
WARRANTY PERIOD SET FORTH ABOVE.  
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an  
implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific  
legal rights and you may also have other rights which vary from state to state.  
JVC AMERICAS CORP.  
1700 Valley Road, Wayne, New Jersey 07470  
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAIL  
OF REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY  
INFORMATION PACKAGED WITH EACH REFURBISHED PRODUCT.  
For customer use:  
Enter below the Model No. and Serial No. which is located either on the rear, bottom or side of the cabinet.  
Retain this information for future reference.  
Model No. :  
Serial No. :  
Purchase date :  
Name of dealer :  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN.  
© 1999 Victor Company of Japan, Limited  
0806SKMSANJEIN  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Insignia MP3 Player NS 8V24 User Manual
Intel Server SRPL8 User Manual
John Deere Grinder AT 3305 J User Manual
JVC Car Speaker KD HDR60 User Manual
JVC Portable Speaker SP CR300WD User Manual
JVC VCR HR J260EU User Manual
Kambrook Fryer KDF350 User Manual
Kathrein Car Satellite Radio System BAS 60 User Manual
Kenwood Car Stereo System DPX304 User Manual
KitchenAid Washer KAWE860W User Manual