User Guide
iPod not included
English............................2
Deutsch..........................9
Français........................15
Español........................21
Italiano..........................27
Nederlands..................33
한국어..........................39
Dansk...........................45
Norsk............................51
日本語..........................57.
简体中文......................63
Russian........................69
Swedish........................75
Finnish..........................81
®
jbl radial micro superior loudspeaker dock for iPod
Download from Www.Somanuals.com. All Manuals Search And Download.
jbl radial micro
Additional features
IR Remote – The JBL Radial Micro IR remote has several modes of operation. Music mode allows you to control the volume, change tracks, fast forward and fast reverse. iPod Navigation mode allows you to navigate iPod menus just as if you were
touching the iPod. You can navigate your music, view your slide shows and find and play your videos.
OnePoint design – The OnePoint iPod connector provides the connection to your computer. Connect a USB cable to the rear of the JBL Radial Micro and, every time you dock your iPod, you’ll have a connection for synchronizing and charging.
Evercharge Topology– JBL Radial Micro charges your iPod whenever you dock your iPod.
Advanced technology
JBL Radial Micro combines proprietary technologies to produce astonishing bass and clear, accurate sound from any direction.
Digital Amplifier – JBL Radial Micro features a high-powered digital amplifier, this technology provides clean, powerful bass, a clear, accurate midrange and high frequencies.
Odyssey® Transducers – The four Odyssey drivers provide accurate high frequencies and are also capable of low-frequency extension of four octaves. This design provides a full, rich frequency response from the lowest bass to the highest highs.
Slipstream Port Design – The JBL Radial Micro port minimizes boundary-layer separation, providing high-output bass with low distortion.
COE (Computer-Optimized Equalization) – The JBL Radial Micro system equalization is computer-optimized to provide a rich, complete soundstage over a wide range of listening positions.
OCT (Optimized Compression Topology) – JBL Radial Micro utilizes a proprietary compression technology to ensure clean, accurate sound at high output levels.
Unpacking
Carefully unpack your JBL Radial Micro system and identify all components:
Getting to know your JBL Radial Micro
A) JBL Radial Micro
B) Power Supply
Front
Back
iPod Dock
6. Auxilary-In
1. Power Button
2. LED
5. Composite Audio/Video-Out
C) IR Remote
D) iPod Dock Adapters (8)
E) 3.5mm Auxiliary Audio Cable
Volume Down
Volume Up
3. DC-In
4. USB
Note: Pressing the Volume Down and Volume Up buttons at the same time will mute the system.
MENU
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
4
jbl radial micro general setup
1
5
1. Unpack the JBL Radial Micro system.
2. Place the appropriate iPod Dock adapter into the docking station.
3. Place the iPod into the adapter.
3
2
4. Connect the power supply into the DC jack (#3).
5. Plug adapter into wall outlet.
Listening to music from an iPod
1. Press the “power” button (#1) located on the back of JBL Radial Micro to turn the unit on. A green LED (#2) will indicate the unit is on.
2. Select and play music through your iPod controls or send commands to your iPod with the remote.
3. Adjust volume using the “+” and “–” volume buttons located on the front of the unit or on the remote
Listening to music from an auxiliary device
1. Connect the auxiliary device into the auxiliary-in jack (#6) using the supplied 3.5mm auxiliary cable.
2. Press the “power” button located on the back of the JBL Radial Micro to turn the unit on.
3. Control music playback through your device.
4. Adjust volume using the “+” and “–” volume buttons located on the front of the unit or on the remote.
Viewing photos or videos on a TV/monitor (optional)
1. Connect one end of the iPod A/V cable (sold separately) to the Composite Audio/Video-Out (#5) on the back of the unit.
2. Connect the other ends of the iPod A/V cable to your TV/Monitor.
3. Set your TV/Monitor to the appropriate input.
4. Set your iPod to display photos or videos through “TV Out” (Refer to your iPod manual for more information).
5. Control photo or video playback through your iPod controls or send commands to your iPod with the JBL Remote.
6. Adjust the volume of your video or background music while viewing photos using the “+” and “–” volume buttons located in front of the unit or on the remote.
Syncing and transferring files with your computer
1. Make sure your iPod is securely docked into the JBL Radial Micro using the correct adapter.
2. Connect a USB cable (sold separately) into the USB Jack (#4) on the back of the unit and connect the other end of the USB cable directly to your computer’s USB port.
Charging your iPod
1. Make sure your iPod is securely docked with JBL Radial Micro using the correct adapter.
2. Make sure JBL Radial Micro is connected to a live electrical outlet.
1N. ote: JBL Radial Micro will not charge other devices.
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote functionality
Navigation Control Mode
Volume Up/Down and Mute will work with all devices. Other functions work only when an iPod is docked.
Turn iPod on:
Press any button on the remote control to wake the iPod.
Turn iPod off:
Bring up iPod menu:
Scroll up:
Press and hold the Play/Pause button for two seconds.
Press the Menu button
Press the Scroll Up button.
Scroll down:
Go to previous menu:
Select menu/track/feature:
Press the Scroll Down button.
Press the Menu button.
Press the Select button.
volume down
play/pause
reverse
volume up
mute
Music control mode
Play a track:
Press the Play/Pause button. Note: If the iPod is at the Main Menu, pressing Play/Pause
will cause the iPod to
start playing all of its music.
forward
Pause a track:
Press the Play/Pause button while a song is playing.
Press the Forward button.
Press the Reverse button.
Press and hold the Forward button.
Press and hold the Reverse button.
Press the Volume Up button.
Press the Volume Down button.
Press the Mute button.
Skip to next track:
Skip to previous track:
Fast advance track:
Fast reverse track:
Increase volume:
Decrease volume:
Mute:
scroll up
menu
scroll down
select
MENU
Go to previous menu:
Select menu/track/feature:
Press the Menu button.
Press the Select button.
Before proceeding, make sure the iPod is securely docked to your JBL product.
Note: JBL Radial Micro must be turned on for remote control to operate your audio device.
Photo/Video control mode
Play slideshow/video:
Skip to next photo/video:
Skip to previous photo/video:
Increase volume:
Decrease volume:
Mute:
Press the Play/Pause button.
Press the Forward button.
Press the Reverse button.
Press the Volume Up button.
Press the Volume Down button.
Press the Mute button.
Note: In order to wake or turn your iPod on when docked in JBL Radial Micro, JBL Radial Micro power button (#1)
must be on.
Photo/Video control mode
The JBL remote’s battery should last a year under normal usage. To replace the battery, release the battery cover on the back
of the remote and replace the old battery with a CR2032-type battery or equivalent.
Dock Adapters
To remove an adaptor, insert a flat-head screw driver (sold separately) into the slot on the back of the adapter
and lift up.
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting your jbl radial micro
Symptom
Possible Problem
Solution
Note
Symptom
Possible Problem
Solution
Sound Quality
Sound Quality
No power to unit.
Make sure wall power outlet or
power strip has power. Make
sure all switches for outlet/
power strip are on and that all
switches for the unit are on.
Is the LED on?
JBL Radial Micro emits a loud
hum or buzzing noise.
Input cable not plugged in
properly.
Check input cable connection.
Replace cable.
If the LED is not on, power is not
getting to your JBL Radial Micro.
Cable may be bad.
Ground loop.
Try the solutions shown.
Turn the JBL Radial Micro off
and connect it to another wall
outlet.
Sound comes from only one
side/channel.
iPod or auxiliary cable is not
seated properly.
Make sure you’re using the
correct iPod adapter, and that
the iPod is seated all the way
into the docking station.
If you’re using a 3.5mm auxiliary
extension cable, make sure it’s a
stereo cable.
Charging/Syncing
Make sure the auxiliary cable is
seated all the way into the jack.
iPod will not charge.
No power to unit.
Make sure wall outlet or power
strip has power. Make sure all
switches for outlet/power strip
are on and that all switches for
the unit are on.
Try resetting the iPod.
Distortion (static, crackling or
hissing sounds).
Noise may be caused by interfer- Move the JBL Radial Micro away
Make sure that the correct
adapter is used for your specific
iPod model.
Wrong adapter is used.
ence from a monitor, cell phone
or other transmitting device.
from the devices to see if the
distortion is eliminated.
Audio source or source material Test the JBL Radial Micro with
may be the problem.
Does the distortion occur with
specific songs?
another source.
Make sure that the iPod is
seated securely into the docking
station.
The iPod is not making full con-
tact with the docking station.
If so, check the recording or
record the source again.
iPod is not recognized
by the computer or an error
message appears.
Third-party accessories may be
conflicting with the USB signal.
Make sure you do not have
JBL Radial Micro connected to
a USB hub or USB device.
Volume level may be too high.
EQ setting may be too high.
Check volume of source.
Some devices will distort the
output signal if the volume is
set to maximum.
Connect the JBL Radial Micro
directly into the computer’s
USB port.
Check the EQ setting on your
iPod or source device.
JBL recommends that the
source-device EQ be set to “Flat”
or “Off”.
Try connecting the USB cable to
another port on the back of the
computer.
USB port is not supplying
enough power.
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
Symptom
Possible Problem
Solution
Note
Manufacturer:
Model Name:
Available in:
Harman Kardon Multimedia
JBL Radial Micro
White or Black
Remote
Pod does not respond to remote The remote’s battery power
Replace battery.
commands.
may be low.
Requirements:
Main connection – iPod docking connector; Auxiliary connection – 1/8
(3.5mm) mini stereo jack
Four OdysseyTM transducers
2 x 10 Watts @ 10% THD
60Hz – 20KHz
Width: 8 (203mm)
Height: 8 (203mm)
Depth: 3.5 (89mm)
1.1 lb (0.5kg)
>5k Ohms
>85dB
Input: 100 – 240V AC, 50Hz/60Hz 0.5A
Redock the iPod. If problem
persists, reset the iPod.
Drivers:
Power:
Frequency Response:
Dimensions:
Move your JBL Radial Micro to
another location.
Possible sources of interference
include plasma displays,
dimmer-controlled lighting,
bright sunlight, and reflective
Interference from surrounding
devices.
Ensure JBL Radial Micro is
plugged into wall outlet and unit surfaces such as mirrors or
is turned on.
JBL Radial Micro is in “off”
mode.
Weight:
Input Impedance:
Signal-to-Noise Ratio:
Power Supply:
blank walls.
Remote only operates at close
range.
The remote range is up to
20 feet.
Move the source unit closer to
the remote.
Replace battery.
The remote battery power may
be low.
JBL 10-Button Remote
Transmission:
Frequency:
IR
38kHz
This device is susceptible to interference from other appliances plugged into nearby outlets. If you experience interference,
JBL recommends moving the device or the other appliance to a different outlet.
Operating Range:
Battery Type:
20 feet
CR2032 3V
Dimensions:
Width: 1.29 (33mm)
Height: 3.38 (86mm)
Depth: 0.23 (6mm)
1.2 oz
Weight (including battery):
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Harman Consumer Group, Inc.
8500.Balboa.Boulevard,.Northridge,.CA.91329.USA
1.516.255.4525.(USA.only)
© 2006 Harman International Industries, Incorporated. All rights reserved. Tous droits réservés.
JBL, Harman International and Odyssey are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries.
iPod and iTunes are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
JBL, Harman International et Odyssey sont des marques commerciales de Harman International Industries, Incorporated, déposées aux États-Unis et/ou dans d’autres pays.
iPod et iTunes sont des marques commerciales de Apple Computer, Inc., déposées aux États-Unis et dans d’autres pays.
Document Number: 950-0165-001
Download from Www.Somanuals.com. All Manuals Search And Download.
|